Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  davinci: Remove unwanted memsize.c from hawkboard's nand spl build
  devkit8000: Move CONFIG_SYS_TEXT_BASE out of bss
  da850evm: pass board revision info to kernel
  arch/arm/include/asm/arch-omap5/clocks.h: Fix GCC 4.2 warnings
  arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix GCC 4.6 warnings
  arch/arm/cpu/armv7/omap-common/spl.c: Fix GCC 4.2 warnings
  MX35: flea3: changes due to hardware revision B
  MX: serial_mxc: cleanup removing nasty #ifdef
  M28: Fix OB1 bug in GPIO driver
  MXS: Add static annotations to dma driver
  apbh_dma: return error value on timeout
  Efika: Configure additional regulators for HDMI output
  mx5: Correct a warning in clock.c
  MC13892: Add REGMODE0 bits definitions
  mx51evk: Configure the pins as GPIOs prior to using gpio_get_value
  mx53smd: Configure the pins as GPIOs prior to using gpio_get_value
  mx53evk: Configure the pins as GPIOs prior to using gpio_get_value
  mx53ard: Configure the pins as GPIOs prior to using gpio_get_value
  mx53loco: Configure the pins as GPIOs prior to using gpio_get_value
  OMAP3: Add SPL_BOARD_INIT hook
  AM3517 CraneBoard: Add SPL support
  AM3517: Add SPL support
  OMAP3: Add SPL support to omap3_evm
  OMAP3: Add SPL support to Beagleboard
  OMAP3 SPL: Add identify_nand_chip function
  OMAP3 SPL: Rework memory initalization and devkit8000 support
  OMAP3: Suffix all Micron memory timing parts with their speed
  OMAP3: Add optimal SDRC autorefresh control values
  omap3: mem: Add MCFG helper macro
  OMAP3: Remove get_mem_type prototype
  OMAP3: Change mem_ok to clear again after reading back
  OMAP3: Add a helper function to set timings in SDRC
  OMAP3: Update SDRC dram_init to always call make_cs1_contiguous()
  omap3: mem: Comment enable_gpmc_cs_config more
  ARM: davici_emac: Fix condition for number of phy detects
  arm: printf() is not available in some SPL configurations
  arm, davinci: add support for am1808 based enbw_cmc board
  arm, davinci: move misc function in arch tree
  arm, board/davinci/common/misc.c: Codingstyle cleanup
  arm, davinci, da850: add uart1 tx rx pinmux config
  arm, davinci: move davinci_rtc struct to hardware.h
  arm, davinci: Remove duplication of pinmux configuration code
  arm, hawkboard: Use the pinmux configurations defined in the arch tree
  arm, da850evm: Use the pinmux configurations defined in the arch tree
  arm, da850: Add pinmux configurations to the arch tree
  arm, da850evm: Do pinmux configuration for EMAC together with other pinmuxes
  arm, hawkboard: Remove obsolete struct pinmux_config i2c_pins
  arm, davinci: Move pinmux functions from board to arch tree
  arm, arm926ejs: always do cpu critical inits
  omap_gpmc: use SOFTECC in SPL if it's enabled
  nand_spl_simple: add support for software ECC
  AM3517: move AM3517 specific mux defines to generic header
  AM35xx: add EMAC support
  davinci_emac: hardcode 100Mbps for AM35xx and RMII
  davinci_emac: fix for running with dcache enabled
  arm926ejs: add noop implementation for dcache ops
  davinci_emac: conditionally compile specific PHY support
  davinci_emac: use internal addresses in buffer descriptors
  davinci_emac: move arch-independent defines to separate header
  BeagleBoard: config: Really switch to ttyO2
  ARM: davinci_dm6467Tevm: Fix build breakage
  ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused
  ARM: OMAP3: Remove unused define SDRC_R_C_B
  ARM: OMAP3: Remove unused define CONFIG_OMAP3430
  omap4: fix IO setting
  omap4+: streamline CONFIG_SYS_TEXT_BASE and other SDRAM addresses
  omap4460: add ES1.1 identification
  omap4: emif: fix error in driver
  omap: remove I2C from SPL
  omap4460: fix TPS initialization
  omap: fix cache line size for omap3/omap4 boards
  omap4: ttyO2 instead of ttyS2 in default bootargs
  omap: Improve PLL parameter calculation tool
  start.S: remove omap3 specific code from start.S
  armv7: setup vector
  armv7: include armv7/cpu.c in SPL build
  armv7: disable L2 cache in cleanup_before_linux()
  arm, arm926ejs: Fix clear bss loop for zero length bss
  PXA: Move colibri_pxa270 to board/toradex/
  PXA: Flip colibri_pxa27x to pxa-common.h
  PXA: Introduce common configuration header for PXA
  PXA: Rename pxa_dram_init to pxa2xx_dram_init
  PXA: Squash extern pxa_dram_init()
  PXA: Export cpu_is_ and pxa_dram_init functions
  PXA: Cleanup Colibri PXA270
  PXA: Replace timer driver
  PXA: Add cpuinfo display for PXA2xx
  PXA: Separate PXA2xx CPU init
  PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X
  PXA: Unify vpac270 environment size
  PXA: Enable command line editing for vpac270
  PXA: Adapt Voipac PXA270 to OneNAND SPL
  PXA: Drop Voipac PXA270 OneNAND IPL
  PXA: Fixup PXA25x boards after start.S update
  PXA: Re-add the Dcache locking as RAM for pxa250
  PXA: Rework start.S to be closer to other ARMs
  PXA: Drop XM250 board
  PXA: Drop PLEB2 board
  PXA: Drop CRADLE board
  PXA: Drop CERF250 board
  Fix regression in SMDK6400
  nand: Add common functions to linux/mtd/nand.h
  Ethernut 5 board support
  net: Armada100: Fix compilation warnings
  ARM: remove duplicated code for LaCie boards
  ARM: add support for LaCie 2Big Network v2
  mvsata: fix ide_preinit for missing disks
  netspace_v2: Read Ethernet MAC address from EEPROM
  omap3evm: Add support for EFI partitions
  part_efi: Fix compile errors

1 files changed, 315 insertions, 0 deletions

diff --git a/drivers/net/davinci_emac.h b/drivers/net/davinci_emac.h
new file mode 100644
index 000000000..37c841ca8
--- /dev/null
+++ b/drivers/net/davinci_emac.h
@@ -0,0 +1,315 @@
+/*
+ * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
+ *
+ * Based on: mach-davinci/emac_defs.h
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DAVINCI_EMAC_H_
+#define _DAVINCI_EMAC_H_
+/* Ethernet Min/Max packet size */
+#define EMAC_MIN_ETHERNET_PKT_SIZE	60
+#define EMAC_MAX_ETHERNET_PKT_SIZE	1518
+/* Buffer size (should be aligned on 32 byte and cache line) */
+#define EMAC_RXBUF_SIZE	ALIGN(ALIGN(EMAC_MAX_ETHERNET_PKT_SIZE, 32),\
+				ARCH_DMA_MINALIGN)
+
+/* Number of RX packet buffers
+ * NOTE: Only 1 buffer supported as of now
+ */
+#define EMAC_MAX_RX_BUFFERS		10
+
+
+/***********************************************
+ ******** Internally used macros ***************
+ ***********************************************/
+
+#define EMAC_CH_TX			1
+#define EMAC_CH_RX			0
+
+/* Each descriptor occupies 4 words, lets start RX desc's at 0 and
+ * reserve space for 64 descriptors max
+ */
+#define EMAC_RX_DESC_BASE		0x0
+#define EMAC_TX_DESC_BASE		0x1000
+
+/* EMAC Teardown value */
+#define EMAC_TEARDOWN_VALUE		0xfffffffc
+
+/* MII Status Register */
+#define MII_STATUS_REG			1
+
+/* Number of statistics registers */
+#define EMAC_NUM_STATS			36
+
+
+/* EMAC Descriptor */
+typedef volatile struct _emac_desc
+{
+	u_int32_t	next;		/* Pointer to next descriptor
+					   in chain */
+	u_int8_t	*buffer;	/* Pointer to data buffer */
+	u_int32_t	buff_off_len;	/* Buffer Offset(MSW) and Length(LSW) */
+	u_int32_t	pkt_flag_len;	/* Packet Flags(MSW) and Length(LSW) */
+} emac_desc;
+
+/* CPPI bit positions */
+#define EMAC_CPPI_SOP_BIT		(0x80000000)
+#define EMAC_CPPI_EOP_BIT		(0x40000000)
+#define EMAC_CPPI_OWNERSHIP_BIT		(0x20000000)
+#define EMAC_CPPI_EOQ_BIT		(0x10000000)
+#define EMAC_CPPI_TEARDOWN_COMPLETE_BIT	(0x08000000)
+#define EMAC_CPPI_PASS_CRC_BIT		(0x04000000)
+
+#define EMAC_CPPI_RX_ERROR_FRAME	(0x03fc0000)
+
+#define EMAC_MACCONTROL_MIIEN_ENABLE		(0x20)
+#define EMAC_MACCONTROL_FULLDUPLEX_ENABLE	(0x1)
+#define EMAC_MACCONTROL_GIGABIT_ENABLE		(1 << 7)
+#define EMAC_MACCONTROL_GIGFORCE		(1 << 17)
+#define EMAC_MACCONTROL_RMIISPEED_100		(1 << 15)
+
+#define EMAC_MAC_ADDR_MATCH		(1 << 19)
+#define EMAC_MAC_ADDR_IS_VALID		(1 << 20)
+
+#define EMAC_RXMBPENABLE_RXCAFEN_ENABLE	(0x200000)
+#define EMAC_RXMBPENABLE_RXBROADEN	(0x2000)
+
+
+#define MDIO_CONTROL_IDLE		(0x80000000)
+#define MDIO_CONTROL_ENABLE		(0x40000000)
+#define MDIO_CONTROL_FAULT_ENABLE	(0x40000)
+#define MDIO_CONTROL_FAULT		(0x80000)
+#define MDIO_USERACCESS0_GO		(0x80000000)
+#define MDIO_USERACCESS0_WRITE_READ	(0x0)
+#define MDIO_USERACCESS0_WRITE_WRITE	(0x40000000)
+#define MDIO_USERACCESS0_ACK		(0x20000000)
+
+/* Ethernet MAC Registers Structure */
+typedef struct  {
+	dv_reg		TXIDVER;
+	dv_reg		TXCONTROL;
+	dv_reg		TXTEARDOWN;
+	u_int8_t	RSVD0[4];
+	dv_reg		RXIDVER;
+	dv_reg		RXCONTROL;
+	dv_reg		RXTEARDOWN;
+	u_int8_t	RSVD1[100];
+	dv_reg		TXINTSTATRAW;
+	dv_reg		TXINTSTATMASKED;
+	dv_reg		TXINTMASKSET;
+	dv_reg		TXINTMASKCLEAR;
+	dv_reg		MACINVECTOR;
+	u_int8_t	RSVD2[12];
+	dv_reg		RXINTSTATRAW;
+	dv_reg		RXINTSTATMASKED;
+	dv_reg		RXINTMASKSET;
+	dv_reg		RXINTMASKCLEAR;
+	dv_reg		MACINTSTATRAW;
+	dv_reg		MACINTSTATMASKED;
+	dv_reg		MACINTMASKSET;
+	dv_reg		MACINTMASKCLEAR;
+	u_int8_t	RSVD3[64];
+	dv_reg		RXMBPENABLE;
+	dv_reg		RXUNICASTSET;
+	dv_reg		RXUNICASTCLEAR;
+	dv_reg		RXMAXLEN;
+	dv_reg		RXBUFFEROFFSET;
+	dv_reg		RXFILTERLOWTHRESH;
+	u_int8_t	RSVD4[8];
+	dv_reg		RX0FLOWTHRESH;
+	dv_reg		RX1FLOWTHRESH;
+	dv_reg		RX2FLOWTHRESH;
+	dv_reg		RX3FLOWTHRESH;
+	dv_reg		RX4FLOWTHRESH;
+	dv_reg		RX5FLOWTHRESH;
+	dv_reg		RX6FLOWTHRESH;
+	dv_reg		RX7FLOWTHRESH;
+	dv_reg		RX0FREEBUFFER;
+	dv_reg		RX1FREEBUFFER;
+	dv_reg		RX2FREEBUFFER;
+	dv_reg		RX3FREEBUFFER;
+	dv_reg		RX4FREEBUFFER;
+	dv_reg		RX5FREEBUFFER;
+	dv_reg		RX6FREEBUFFER;
+	dv_reg		RX7FREEBUFFER;
+	dv_reg		MACCONTROL;
+	dv_reg		MACSTATUS;
+	dv_reg		EMCONTROL;
+	dv_reg		FIFOCONTROL;
+	dv_reg		MACCONFIG;
+	dv_reg		SOFTRESET;
+	u_int8_t	RSVD5[88];
+	dv_reg		MACSRCADDRLO;
+	dv_reg		MACSRCADDRHI;
+	dv_reg		MACHASH1;
+	dv_reg		MACHASH2;
+	dv_reg		BOFFTEST;
+	dv_reg		TPACETEST;
+	dv_reg		RXPAUSE;
+	dv_reg		TXPAUSE;
+	u_int8_t	RSVD6[16];
+	dv_reg		RXGOODFRAMES;
+	dv_reg		RXBCASTFRAMES;
+	dv_reg		RXMCASTFRAMES;
+	dv_reg		RXPAUSEFRAMES;
+	dv_reg		RXCRCERRORS;
+	dv_reg		RXALIGNCODEERRORS;
+	dv_reg		RXOVERSIZED;
+	dv_reg		RXJABBER;
+	dv_reg		RXUNDERSIZED;
+	dv_reg		RXFRAGMENTS;
+	dv_reg		RXFILTERED;
+	dv_reg		RXQOSFILTERED;
+	dv_reg		RXOCTETS;
+	dv_reg		TXGOODFRAMES;
+	dv_reg		TXBCASTFRAMES;
+	dv_reg		TXMCASTFRAMES;
+	dv_reg		TXPAUSEFRAMES;
+	dv_reg		TXDEFERRED;
+	dv_reg		TXCOLLISION;
+	dv_reg		TXSINGLECOLL;
+	dv_reg		TXMULTICOLL;
+	dv_reg		TXEXCESSIVECOLL;
+	dv_reg		TXLATECOLL;
+	dv_reg		TXUNDERRUN;
+	dv_reg		TXCARRIERSENSE;
+	dv_reg		TXOCTETS;
+	dv_reg		FRAME64;
+	dv_reg		FRAME65T127;
+	dv_reg		FRAME128T255;
+	dv_reg		FRAME256T511;
+	dv_reg		FRAME512T1023;
+	dv_reg		FRAME1024TUP;
+	dv_reg		NETOCTETS;
+	dv_reg		RXSOFOVERRUNS;
+	dv_reg		RXMOFOVERRUNS;
+	dv_reg		RXDMAOVERRUNS;
+	u_int8_t	RSVD7[624];
+	dv_reg		MACADDRLO;
+	dv_reg		MACADDRHI;
+	dv_reg		MACINDEX;
+	u_int8_t	RSVD8[244];
+	dv_reg		TX0HDP;
+	dv_reg		TX1HDP;
+	dv_reg		TX2HDP;
+	dv_reg		TX3HDP;
+	dv_reg		TX4HDP;
+	dv_reg		TX5HDP;
+	dv_reg		TX6HDP;
+	dv_reg		TX7HDP;
+	dv_reg		RX0HDP;
+	dv_reg		RX1HDP;
+	dv_reg		RX2HDP;
+	dv_reg		RX3HDP;
+	dv_reg		RX4HDP;
+	dv_reg		RX5HDP;
+	dv_reg		RX6HDP;
+	dv_reg		RX7HDP;
+	dv_reg		TX0CP;
+	dv_reg		TX1CP;
+	dv_reg		TX2CP;
+	dv_reg		TX3CP;
+	dv_reg		TX4CP;
+	dv_reg		TX5CP;
+	dv_reg		TX6CP;
+	dv_reg		TX7CP;
+	dv_reg		RX0CP;
+	dv_reg		RX1CP;
+	dv_reg		RX2CP;
+	dv_reg		RX3CP;
+	dv_reg		RX4CP;
+	dv_reg		RX5CP;
+	dv_reg		RX6CP;
+	dv_reg		RX7CP;
+} emac_regs;
+
+/* EMAC Wrapper Registers Structure */
+typedef struct  {
+#ifdef DAVINCI_EMAC_VERSION2
+	dv_reg		idver;
+	dv_reg		softrst;
+	dv_reg		emctrl;
+	dv_reg		c0rxthreshen;
+	dv_reg		c0rxen;
+	dv_reg		c0txen;
+	dv_reg		c0miscen;
+	dv_reg		c1rxthreshen;
+	dv_reg		c1rxen;
+	dv_reg		c1txen;
+	dv_reg		c1miscen;
+	dv_reg		c2rxthreshen;
+	dv_reg		c2rxen;
+	dv_reg		c2txen;
+	dv_reg		c2miscen;
+	dv_reg		c0rxthreshstat;
+	dv_reg		c0rxstat;
+	dv_reg		c0txstat;
+	dv_reg		c0miscstat;
+	dv_reg		c1rxthreshstat;
+	dv_reg		c1rxstat;
+	dv_reg		c1txstat;
+	dv_reg		c1miscstat;
+	dv_reg		c2rxthreshstat;
+	dv_reg		c2rxstat;
+	dv_reg		c2txstat;
+	dv_reg		c2miscstat;
+	dv_reg		c0rximax;
+	dv_reg		c0tximax;
+	dv_reg		c1rximax;
+	dv_reg		c1tximax;
+	dv_reg		c2rximax;
+	dv_reg		c2tximax;
+#else
+	u_int8_t	RSVD0[4100];
+	dv_reg		EWCTL;
+	dv_reg		EWINTTCNT;
+#endif
+} ewrap_regs;
+
+/* EMAC MDIO Registers Structure */
+typedef struct  {
+	dv_reg		VERSION;
+	dv_reg		CONTROL;
+	dv_reg		ALIVE;
+	dv_reg		LINK;
+	dv_reg		LINKINTRAW;
+	dv_reg		LINKINTMASKED;
+	u_int8_t	RSVD0[8];
+	dv_reg		USERINTRAW;
+	dv_reg		USERINTMASKED;
+	dv_reg		USERINTMASKSET;
+	dv_reg		USERINTMASKCLEAR;
+	u_int8_t	RSVD1[80];
+	dv_reg		USERACCESS0;
+	dv_reg		USERPHYSEL0;
+	dv_reg		USERACCESS1;
+	dv_reg		USERPHYSEL1;
+} mdio_regs;
+
+int davinci_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data);
+int davinci_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data);
+
+typedef struct {
+	char	name[64];
+	int	(*init)(int phy_addr);
+	int	(*is_phy_connected)(int phy_addr);
+	int	(*get_link_speed)(int phy_addr);
+	int	(*auto_negotiate)(int phy_addr);
+} phy_t;
+
+#endif /* _DAVINCI_EMAC_H_ */