Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm: (212 commits)
  ARM: cache: Move the cp15 CR register read before flushing the cache.
  ARM: introduce arch_early_init_r()
  PXA: Enable CONFIG_PREBOOT on zipitz2
  ARM: mx28: Remove CONFIG_ARCH_CPU_INIT
  No need to define CONFIG_ARCH_CPU_INIT.
  add new board vl_ma2sc
  MTD: SPEAr SMI: Add write support for length < 4 bytes
  i2c: designware_i2c.c: Add support for the "i2c probe" command
  rtc/m41t62: Add support for M41T82 with HT (Halt Update)
  SPL: ARM: spear: Add SPL support for SPEAr600 platform
  Makefile: Add u-boot.spr build target (SPEAr)
  SPL: ARM: spear: Remove some objects from SPL build
  SPL: lib/Makefile: Add crc32.c to SPL build
  SPL: common/Makefile: Add image.c to SPL build
  arm: Don't use printf() in SPL builds
  GPIO: Add SPEAr GPIO driver
  net: Multiple updates/enhancements to designware.c
  cleanup/SPEAr: Define configuration flags more elegantly
  cleanup/SPEAr: Remove unnecessary parenthesis
  SPEAr: Correct SoC ID offset in misc configuration space
  SPEAr: explicitly select clk src for UART
  SPEAr: Remove CONFIG_MTD_NAND_VERIFY_WRITE to speed up NAND access
  SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and evb
  SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro
  SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE
  SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION
  SPEAr: Enable dcache for fast file transfer
  SPEAr: Enable autoneg for ethernet
  SPEAr: Enable udc and usb-console support only for usbtty configuration
  SPEAr: Enable usb device high speed support
  SPEAr: Initialize SNOR in early_board_init_f
  SPEAr: Change the default environment variables
  SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK)
  SPEAr: Add configuration options for spear3xx and spear6xx boards
  SPEAr: Add basic arch related support for SPEAr SoCs
  SPEAr: Add interface information in initialization
  SPEAr: Add macb driver support for spear310 and spear320
  SPEAr: Configure network support for spear SoCs
  SPEAr: Place ethaddr write and read within CONFIG_CMD_NET
  SPEAr: Eliminate dependency on Xloader table
  SPEAr: Fix ARM relocation support
  st_smi: Fixed page size for Winbond W25Q128FV flash
  st_smi: Change timeout loop implementation
  st_smi: Fix bug in flash_print_info()
  st_smi: Change the flash probing method
  st_smi: Removed no needed dependency on ST_M25Pxx_ID
  st_smi: Fix smi read status
  st_smi: Move status register read before modifying ctrl register
  st_smi: Read status until timeout happens
  st_smi: Enhance the error handling
  st_smi: Change SMI timeout values
  st_smi: Return error in case TFF is not set
  st_smi: Add support for SPEAr SMI driver
  mtd/NAND: Remove obsolete SPEAr specific NAND drivers
  SPEAr: Configure FSMC driver for NAND interface
  mtd/NAND: Add FSMC driver support
  arm/km: remove calls to kw_gpio_* in board_early_init_f
  arm/km: add implementation for read_dip_switch
  arm/km: support the 2 PCIe fpga resets
  arm/km: skip FPGA config when already configured
  arm/km: redefine piggy 4 reg names to avoid conflicts
  arm/km: cleanup km_kirkwood boards
  arm/km: enable BOCO2 FPGA download support
  arm/km: remove portl2.h and use km_kirkwood instead
  arm/km: convert mgcoge3un target to km_kirkwood
  arm/km: add kmcoge5un board support
  arm/km: add kmnusa board support
  arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0
  cm-t35: fix incorrect NAND_ECC layout selection
  ARM: OMAP4/5: Do not configure non essential pads, clocks, dplls.
  ARM: OMAP4/5: Move USB pads to essential list.
  ARM: OMAP4/5: Move USB clocks to essential group.
  ARM: OMAP4/5: Move gpmc clocks to essential group.
  ARM: OMAP4+: Move external phy initialisations to arch specific place.
  omap4: Use a smaller M,N couple for IVA DPLL
  da850/omap-l138: Enable auto negotiation in RMII mode
  omap: am33xx: accomodate input clocks other than 24 Mhz
  omap: emif: fix bug in manufacturer code test
  omap: emif: deal with rams that return duplicate mr data on all byte lanes
  OMAP4+: Force DDR in self-refresh after warm reset
  OMAP4+: Handle sdram init after warm reset
  ARM: OMAP3+: Detect reset type
  arm: bugfix: Move vector table before jumping relocated code
  Kirkwood: Add support for Ka-Ro TK71
  arm/km: use spi claim bus to switch between SPI and NAND
  arm/kirkwood: protect the ENV_SPI #defines
  ARM: don't probe PHY address for LaCie boards
  lacie_kw: fix CONFIG_SYS_KWD_CONFIG for inetspace_v2
  lacie_kw: fix SDRAM banks number for net2big_v2
  Kirkwood: add lschlv2 and lsxhl board support
  net: add helper to generate random mac address
  net: use common rand()/srand() functions
  lib: add rand() function
  kwboot: boot kirkwood SoCs over a serial link
  kw_spi: add weak functions board_spi_claim/release_bus
  kw_spi: support spi_claim/release_bus functions
  kw_spi: backup and reset the MPP of the chosen CS pin
  kirkwood: fix calls to kirkwood_mpp_conf
  kirkwood: add save functionality kirkwood_mpp_conf function
  km_arm: use filesize for erase in update command
  arm/km: enable mii cmd
  arm/km: remove CONFIG_RESET_PHY_R
  arm/km: change maintainer for mgcoge3un
  arm/km: fix wrong comment in SDRAM config for mgcoge3un
  arm/km: use ARRAY_SIZE macro
  arm/km: rename CONFIG option CONFIG_KM_DEF_ENV_UPDATE
  arm/km: add piggy mac adress offset for mgcoge3un
  arm/km: add board type to boards.cfg
  AT91SAM9*: Change kernel address in dataflash to match u-boot's size
  ATMEL/PIO: Enable new feature of PIO on Atmel device
  ehci-atmel: fix compiler warning
  AT91: at91sam9m10g45ek : Enable EHCI instead OHCI
  Atmel : usb : add EHCI driver for Atmel SoC
  Fix: AT91SAM9263 nor flash usage
  Fix: broken boot message at serial line on AT91SAM9263-EK board
  i.MX6 USDHC: Use the ESDHC clock
  mx28evk: Fix boot by adjusting HW_DRAM_CTL29 register
  i.MX28: Add function to adjust memory parameters
  mx28evk: Fix PSWITCH key position
  mx53smd: Remove CONFIG_SYS_I2C_SLAVE definition
  mx53loco: Remove CONFIG_SYS_I2C_SLAVE definition
  mx53evk: Remove CONFIG_SYS_I2C_SLAVE definition
  mx53ard: Remove CONFIG_SYS_I2C_SLAVE definition
  mx35pdk: Remove CONFIG_SYS_I2C_SLAVE definition
  imx31_phycore: Remove CONFIG_SYS_I2C_SLAVE definition
  mx53ard: Remove unused CONFIG_MII_GASKET
  mx6: Avoid writing to read-only bits in imximage.cfg
  m28evk: use same notation to alloc the 128kB stack
  ...

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 0 insertions, 124 deletions

diff --git a/drivers/mtd/nand/spr_nand.c b/drivers/mtd/nand/spr_nand.c
deleted file mode 100644
index 097d0c60b..000000000
--- a/drivers/mtd/nand/spr_nand.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * (C) Copyright 2009
- * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/spr_nand.h>
-
-static struct fsmc_regs *const fsmc_regs_p =
-    (struct fsmc_regs *)CONFIG_SPEAR_FSMCBASE;
-
-static struct nand_ecclayout spear_nand_ecclayout = {
-	.eccbytes = 24,
-	.eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52,
-		   66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116},
-	.oobfree = {
-		    {.offset = 8, .length = 8},
-		    {.offset = 24, .length = 8},
-		    {.offset = 40, .length = 8},
-		    {.offset = 56, .length = 8},
-		    {.offset = 72, .length = 8},
-		    {.offset = 88, .length = 8},
-		    {.offset = 104, .length = 8},
-		    {.offset = 120, .length = 8}
-		    }
-};
-
-static void spear_nand_hwcontrol(struct mtd_info *mtd, int cmd, uint ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	ulong IO_ADDR_W;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		IO_ADDR_W = (ulong)this->IO_ADDR_W;
-
-		IO_ADDR_W &= ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE);
-		if (ctrl & NAND_CLE)
-			IO_ADDR_W |= CONFIG_SYS_NAND_CLE;
-		if (ctrl & NAND_ALE)
-			IO_ADDR_W |= CONFIG_SYS_NAND_ALE;
-
-		if (ctrl & NAND_NCE) {
-			writel(readl(&fsmc_regs_p->genmemctrl_pc) |
-			       FSMC_ENABLE, &fsmc_regs_p->genmemctrl_pc);
-		} else {
-			writel(readl(&fsmc_regs_p->genmemctrl_pc) &
-			       ~FSMC_ENABLE, &fsmc_regs_p->genmemctrl_pc);
-		}
-		this->IO_ADDR_W = (void *)IO_ADDR_W;
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->IO_ADDR_W);
-}
-
-static int spear_read_hwecc(struct mtd_info *mtd,
-			    const u_char *data, u_char ecc[3])
-{
-	u_int ecc_tmp;
-
-	/* read the h/w ECC */
-	ecc_tmp = readl(&fsmc_regs_p->genmemctrl_ecc);
-
-	ecc[0] = (u_char) (ecc_tmp & 0xFF);
-	ecc[1] = (u_char) ((ecc_tmp & 0xFF00) >> 8);
-	ecc[2] = (u_char) ((ecc_tmp & 0xFF0000) >> 16);
-
-	return 0;
-}
-
-void spear_enable_hwecc(struct mtd_info *mtd, int mode)
-{
-	writel(readl(&fsmc_regs_p->genmemctrl_pc) & ~0x80,
-	       &fsmc_regs_p->genmemctrl_pc);
-	writel(readl(&fsmc_regs_p->genmemctrl_pc) & ~FSMC_ECCEN,
-	       &fsmc_regs_p->genmemctrl_pc);
-	writel(readl(&fsmc_regs_p->genmemctrl_pc) | FSMC_ECCEN,
-	       &fsmc_regs_p->genmemctrl_pc);
-}
-
-int spear_nand_init(struct nand_chip *nand)
-{
-	writel(FSMC_DEVWID_8 | FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON,
-	       &fsmc_regs_p->genmemctrl_pc);
-	writel(readl(&fsmc_regs_p->genmemctrl_pc) | FSMC_TCLR_1 | FSMC_TAR_1,
-	       &fsmc_regs_p->genmemctrl_pc);
-	writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
-	       &fsmc_regs_p->genmemctrl_comm);
-	writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
-	       &fsmc_regs_p->genmemctrl_attrib);
-
-	nand->options = 0;
-	nand->ecc.mode = NAND_ECC_HW;
-	nand->ecc.layout = &spear_nand_ecclayout;
-	nand->ecc.size = 512;
-	nand->ecc.bytes = 3;
-	nand->ecc.calculate = spear_read_hwecc;
-	nand->ecc.hwctl = spear_enable_hwecc;
-	nand->ecc.correct = nand_correct_data;
-	nand->cmd_ctrl = spear_nand_hwcontrol;
-	return 0;
-}