* Patch by Bernhard Kuhn, 28 Nov 2003:

  add support for Coldfire CPU
  add support for Motorola M5272C3 and M5282EVB boards

1 files changed, 300 insertions, 0 deletions

diff --git a/cpu/coldfire/fec.c b/cpu/coldfire/fec.c
new file mode 100644
index 000000000..53a93c1ce
--- /dev/null
+++ b/cpu/coldfire/fec.c
@@ -0,0 +1,300 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <commproc.h>
+#include <net.h>
+#include <command.h>
+
+
+
+/**************************************************************
+ *
+ * FEC Ethernet Initialization Routine
+ *
+ *************************************************************/
+
+#define FEC_ECNTRL_ETHER_EN	0x00000002
+#define FEC_ECNTRL_RESET	0x00000001
+
+#define FEC_RCNTRL_BC_REJ	0x00000010
+#define FEC_RCNTRL_PROM		0x00000008
+#define FEC_RCNTRL_MII_MODE	0x00000004
+#define FEC_RCNTRL_DRT		0x00000002
+#define FEC_RCNTRL_LOOP		0x00000001
+
+#define FEC_TCNTRL_FDEN		0x00000004
+#define FEC_TCNTRL_HBC		0x00000002
+#define FEC_TCNTRL_GTS		0x00000001
+
+#define	FEC_RESET_DELAY		50000
+
+
+
+/* Ethernet Transmit and Receive Buffers */
+#define DBUF_LENGTH  1520
+
+#define TX_BUF_CNT 2
+
+#define TOUT_LOOP 100
+
+#define PKT_MAXBUF_SIZE         1518
+#define PKT_MINBUF_SIZE         64
+#define PKT_MAXBLR_SIZE         1520
+
+
+
+#ifdef CONFIG_M5272
+#define FEC_ADDR 0x10000840
+#endif
+#ifdef CONFIG_M5282
+#define FEC_ADDR 0x40001000
+#endif
+
+#undef	ET_DEBUG
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(FEC_ENET)
+
+
+
+static char txbuf[DBUF_LENGTH];
+
+static uint rxIdx;	/* index of the current RX buffer */
+static uint txIdx;	/* index of the current TX buffer */
+
+/*
+  * FEC Ethernet Tx and Rx buffer descriptors allocated at the
+  *  immr->udata_bd address on Dual-Port RAM
+  * Provide for Double Buffering
+  */
+
+typedef volatile struct CommonBufferDescriptor {
+    cbd_t rxbd[PKTBUFSRX];		/* Rx BD */
+    cbd_t txbd[TX_BUF_CNT];		/* Tx BD */
+} RTXBD;
+
+static RTXBD *rtx = 0x380000;
+
+
+int eth_send(volatile void *packet, int length)
+{
+	int j, rc;
+	volatile fec_t *fecp = FEC_ADDR;
+
+	/* section 16.9.23.3
+	 * Wait for ready
+	 */
+	j = 0;
+	while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
+		udelay(1);
+		j++;
+	}
+	if (j>=TOUT_LOOP) {
+		printf("TX not ready\n");
+	}
+
+	rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
+	rtx->txbd[txIdx].cbd_datlen  = length;
+	rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST;
+
+	/* Activate transmit Buffer Descriptor polling */
+	fecp->fec_x_des_active = 0x01000000;	/* Descriptor polling active	*/
+
+	j = 0;
+	while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
+		udelay(1);
+		j++;
+	}
+	if (j>=TOUT_LOOP) {
+		printf("TX timeout\n");
+	}
+#ifdef ET_DEBUG
+	printf("%s[%d] %s: cycles: %d    status: %x  retry cnt: %d\n",
+	__FILE__,__LINE__,__FUNCTION__,j,rtx->txbd[txIdx].cbd_sc,
+	(rtx->txbd[txIdx].cbd_sc & 0x003C)>>2);
+#endif
+	/* return only status bits */;
+	rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS);
+
+	txIdx = (txIdx + 1) % TX_BUF_CNT;
+
+	return rc;
+}
+
+int eth_rx(void)
+{
+	int length;
+	volatile fec_t *fecp = FEC_ADDR;
+
+   for (;;)
+   {     
+	/* section 16.9.23.2 */
+	if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
+		length = -1;
+		break;     /* nothing received - leave for() loop */
+	}
+
+	length = rtx->rxbd[rxIdx].cbd_datlen;
+
+	if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
+#ifdef ET_DEBUG
+		printf("%s[%d] err: %x\n",
+		__FUNCTION__,__LINE__,rtx->rxbd[rxIdx].cbd_sc);
+#endif
+	} else {
+		/* Pass the packet up to the protocol layers. */
+		NetReceive(NetRxPackets[rxIdx], length - 4);
+	}
+
+	/* Give the buffer back to the FEC. */
+	rtx->rxbd[rxIdx].cbd_datlen = 0;
+
+	/* wrap around buffer index when necessary */
+	if ((rxIdx + 1) >= PKTBUFSRX) {
+           rtx->rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
+	   rxIdx = 0;
+	} else {
+           rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
+	   rxIdx++;
+	}
+	
+	/* Try to fill Buffer Descriptors */
+	fecp->fec_r_des_active = 0x01000000;	/* Descriptor polling active	*/
+   }
+
+   return length;
+}
+
+
+int eth_init (bd_t * bd)
+{
+
+	int i;
+	volatile fec_t *fecp = FEC_ADDR;
+	
+	/* Whack a reset.
+	 * A delay is required between a reset of the FEC block and
+	 * initialization of other FEC registers because the reset takes
+	 * some time to complete. If you don't delay, subsequent writes
+	 * to FEC registers might get killed by the reset routine which is
+	 * still in progress.
+	 */
+
+	fecp->fec_ecntrl = FEC_ECNTRL_RESET;
+	for (i = 0;
+	     (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
+	     ++i) {
+		udelay (1);
+	}
+	if (i == FEC_RESET_DELAY) {
+		printf ("FEC_RESET_DELAY timeout\n");
+		return 0;
+	}
+
+	/* We use strictly polling mode only
+	 */
+	fecp->fec_imask = 0;
+	
+	/* Clear any pending interrupt */
+	fecp->fec_ievent = 0xffffffff;
+	
+	/* Set station address	 */
+#define ea bd->bi_enetaddr
+	fecp->fec_addr_low   =	(ea[0] << 24) | (ea[1] << 16) |
+				(ea[2] <<  8) | (ea[3]        ) ;
+	fecp->fec_addr_high  =	(ea[4] << 24) | (ea[5] << 16  ) ;
+#undef ea
+
+	/* Clear multicast address hash table
+	 */
+	fecp->fec_hash_table_high = 0;
+	fecp->fec_hash_table_low  = 0;
+
+	/* Set maximum receive buffer size.
+	 */
+	fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
+
+	/*
+	 * Setup Buffers and Buffer Desriptors
+	 */
+	rxIdx = 0;
+	txIdx = 0;
+
+	/*
+	 * Setup Receiver Buffer Descriptors (13.14.24.18)
+	 * Settings:
+	 *     Empty, Wrap
+	 */
+	for (i = 0; i < PKTBUFSRX; i++) {
+		rtx->rxbd[i].cbd_sc      = BD_ENET_RX_EMPTY;
+		rtx->rxbd[i].cbd_datlen  = 0;	/* Reset */
+		rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
+	}
+	rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
+
+	/*
+	 * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
+	 * Settings:
+	 *    Last, Tx CRC
+	 */
+	for (i = 0; i < TX_BUF_CNT; i++) {
+	        rtx->txbd[i].cbd_sc      = BD_ENET_TX_LAST | BD_ENET_TX_TC;
+		rtx->txbd[i].cbd_datlen  = 0;	/* Reset */
+		rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
+	}
+	rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
+
+	/* Set receive and transmit descriptor base
+	 */
+	fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]);
+	fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]);
+
+	/* Enable MII mode
+	 */
+
+	/* Half duplex mode */
+	fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE<<16) | FEC_RCNTRL_MII_MODE;
+	fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE<<16) | FEC_RCNTRL_MII_MODE;
+	fecp->fec_x_cntrl = 0;
+
+	fecp->fec_mii_speed = 0;
+
+	/* Now enable the transmit and receive processing
+	 */
+	fecp->fec_ecntrl = FEC_ECNTRL_ETHER_EN;
+
+	/* And last, try to fill Rx Buffer Descriptors */
+	fecp->fec_r_des_active = 0x01000000;	/* Descriptor polling active	*/
+
+	return 1;
+}
+
+
+
+void eth_halt(void)
+{
+	volatile fec_t *fecp = FEC_ADDR;
+	fecp->fec_ecntrl = 0;
+}
+
+#endif