diff options
| author | Wolfgang Denk <wd@denx.de> | 2011-04-05 12:24:20 +0200 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2011-04-05 12:24:20 +0200 |
| commit | 4db2fa7f9446d0f2fe8db3d62184b1212fe22707 (patch) | |
| tree | bc62cbfc14296551caebda626db7a90fef9ae844 /board/xes/xpedite517x/ddr.c | |
| parent | 75df0d594990875419121c6f8687472ac9f4ae7a (diff) | |
| parent | 7d3053fbf16caad4745f42f7ae3e38e9d3e964b5 (diff) | |
| download | olio-uboot-2014.01-4db2fa7f9446d0f2fe8db3d62184b1212fe22707.tar.xz olio-uboot-2014.01-4db2fa7f9446d0f2fe8db3d62184b1212fe22707.zip | |
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Conflicts:
drivers/usb/host/ehci-pci.c
Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'board/xes/xpedite517x/ddr.c')
| -rw-r--r-- | board/xes/xpedite517x/ddr.c | 32 |
1 files changed, 2 insertions, 30 deletions
diff --git a/board/xes/xpedite517x/ddr.c b/board/xes/xpedite517x/ddr.c index 1d57d0909..3a6e297f4 100644 --- a/board/xes/xpedite517x/ddr.c +++ b/board/xes/xpedite517x/ddr.c @@ -26,40 +26,12 @@ #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) +void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address) { i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); } -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_bus_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0) { - i2c_address = SPD_EEPROM_ADDRESS1; -#ifdef SPD_EEPROM_ADDRESS2 - } else if (ctrl_num == 1) { - i2c_address = SPD_EEPROM_ADDRESS2; -#endif - } else { - /* An inalid ctrl number was give, use default SPD */ - printf("ERROR: invalid DDR ctrl: %d\n", ctrl_num); - i2c_address = SPD_EEPROM_ADDRESS1; - } - - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - /* * There are four board-specific SDRAM timing parameters which must be * calculated based on the particular PCB artwork. These are: @@ -144,7 +116,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, unsigned int datarate; get_sys_info(&sysinfo); - datarate = fsl_ddr_get_mem_data_rate() / 1000000; + datarate = get_ddr_freq(0) / 1000000; for (i = 0; i < ARRAY_SIZE(bopts_ctrl[ctrl_num]); i++) { if ((bopts[i].datarate_mhz_low <= datarate) && |