Merge branch 'fixes' into cleanups

Conflicts:

	board/atmel/atngw100/atngw100.c
	board/atmel/atstk1000/atstk1000.c
	cpu/at32ap/at32ap700x/gpio.c
	include/asm-avr32/arch-at32ap700x/clk.h
	include/configs/atngw100.h
	include/configs/atstk1002.h
	include/configs/atstk1003.h
	include/configs/atstk1004.h
	include/configs/atstk1006.h
	include/configs/favr-32-ezkit.h
	include/configs/hammerhead.h
	include/configs/mimc200.h

1 files changed, 17 insertions, 11 deletions

diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c
index 8050aa6fe..779f957d6 100644
--- a/board/sc520_cdp/sc520_cdp.c
+++ b/board/sc520_cdp/sc520_cdp.c
@@ -29,6 +29,7 @@
 #include <asm/ic/sc520.h>
 #include <asm/ic/ali512x.h>
 #include <spi.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -86,7 +87,7 @@ static void irq_init(void)
 	write_mmcr_byte(SC520_ICEMAP, SC520_IRQ1);              /* Set ICE Debug Serielport INT to IRQ1 */
 	write_mmcr_byte(SC520_FERRMAP,SC520_IRQ13);             /* Set FP error INT to IRQ13 */
 
-	if (CFG_USE_SIO_UART) {
+	if (CONFIG_SYS_USE_SIO_UART) {
 		write_mmcr_byte(SC520_UART1MAP, SC520_IRQ_DISABLED); /* disable internal UART1 INT */
 		write_mmcr_byte(SC520_UART2MAP, SC520_IRQ_DISABLED); /* disable internal UART2 INT */
 		write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ3);          /* Set GPIRQ3 (ISA IRQ3) to IRQ3 */
@@ -113,7 +114,7 @@ static void irq_init(void)
 
 }
 
-
+#ifdef CONFIG_PCI
 /* PCI stuff */
 static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
 {
@@ -121,14 +122,14 @@ static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
 	 * when we need one (a board with more pci interrupt pins
 	 * would use a larger table */
 	static int irq_list[] = {
-		CFG_FIRST_PCI_IRQ,
-		CFG_SECOND_PCI_IRQ,
-		CFG_THIRD_PCI_IRQ,
-		CFG_FORTH_PCI_IRQ
+		CONFIG_SYS_FIRST_PCI_IRQ,
+		CONFIG_SYS_SECOND_PCI_IRQ,
+		CONFIG_SYS_THIRD_PCI_IRQ,
+		CONFIG_SYS_FORTH_PCI_IRQ
 	};
 	static int next_irq_index=0;
 
-	char tmp_pin;
+	uchar tmp_pin;
 	int pin;
 
 	pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &tmp_pin);
@@ -192,7 +193,7 @@ void pci_init_board(void)
 {
 	pci_sc520_init(&sc520_cdp_hose);
 }
-
+#endif
 
 static void silence_uart(int port)
 {
@@ -278,7 +279,7 @@ static void bus_init(void)
 
 	asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */
 
-	if (CFG_USE_SIO_UART) {
+	if (CONFIG_SYS_USE_SIO_UART) {
 		write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) | UART2_DIS|UART1_DIS);
 		setup_ali_sio(1);
 	} else {
@@ -562,12 +563,12 @@ void spi_eeprom_probe(int x)
 {
 }
 
-int spi_eeprom_read(int x, int offset, char *buffer, int len)
+int spi_eeprom_read(int x, int offset, uchar *buffer, int len)
 {
        return 0;
 }
 
-int spi_eeprom_write(int x, int offset, char *buffer, int len)
+int spi_eeprom_write(int x, int offset, uchar *buffer, int len)
 {
        return 0;
 }
@@ -629,3 +630,8 @@ ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
 #endif
 	return res;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}