mpc85xx: Add support for SBC8548 (updated)

Add support for Wind River's SBC8548 reference board.

Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
Signed-off by: Andy Fleming <afleming@freescale.com>

1 files changed, 569 insertions, 0 deletions

diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
new file mode 100644
index 000000000..5e258f5d6
--- /dev/null
+++ b/board/sbc8548/sbc8548.c
@@ -0,0 +1,569 @@
+/*
+ * Copyright 2007 Wind River Systemes, Inc. <www.windriver.com>
+ * Copyright 2007 Embedded Specialties, Inc.
+ *
+ * Copyright 2004, 2007 Freescale Semiconductor.
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
+#include <spd.h>
+#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern long int spd_sdram(void);
+
+void local_bus_init(void);
+void sdram_init(void);
+long int fixed_sdram (void);
+
+int board_early_init_f (void)
+{
+	return 0;
+}
+
+int checkboard (void)
+{
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
+
+	printf ("Board: Wind River SBC8548 Rev. 0x%01x\n",
+			(volatile)(*(u_char *)CFG_BD_REV) >> 4);
+
+	/*
+	 * Initialize local bus.
+	 */
+	local_bus_init ();
+
+	/*
+	 * Fix CPU2 errata: A core hang possible while executing a
+	 * msync instruction and a snoopable transaction from an I/O
+	 * master tagged to make quick forward progress is present.
+	 */
+	ecm->eebpcr |= (1 << 16);
+
+	/*
+	 * Hack TSEC 3 and 4 IO voltages.
+	 */
+	gur->tsec34ioovcr = 0xe7e0;	/*  1110 0111 1110 0xxx */
+
+	ecm->eedr = 0xffffffff;		/* clear ecm errors */
+	ecm->eeer = 0xffffffff;		/* enable ecm errors */
+	return 0;
+}
+
+long int
+initdram(int board_type)
+{
+	long dram_size = 0;
+
+	puts("Initializing\n");
+
+#if defined(CONFIG_DDR_DLL)
+	{
+		/*
+		 * Work around to stabilize DDR DLL MSYNC_IN.
+		 * Errata DDR9 seems to have been fixed.
+		 * This is now the workaround for Errata DDR11:
+		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
+		 */
+
+		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+
+		gur->ddrdllcr = 0x81000000;
+		asm("sync;isync;msync");
+		udelay(200);
+	}
+#endif
+
+#if defined(CONFIG_SPD_EEPROM)
+	dram_size = spd_sdram ();
+#else
+	dram_size = fixed_sdram ();
+#endif
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	/*
+	 * Initialize and enable DDR ECC.
+	 */
+	ddr_enable_ecc(dram_size);
+#endif
+	/*
+	 * SDRAM Initialization
+	 */
+	sdram_init();
+
+	puts("    DDR: ");
+	return dram_size;
+}
+
+/*
+ * Initialize Local Bus
+ */
+void
+local_bus_init(void)
+{
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+
+	uint clkdiv;
+	uint lbc_hz;
+	sys_info_t sysinfo;
+
+	get_sys_info(&sysinfo);
+	clkdiv = (lbc->lcrr & 0x0f) * 2;
+	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+
+	gur->lbiuiplldcr1 = 0x00078080;
+	if (clkdiv == 16) {
+		gur->lbiuiplldcr0 = 0x7c0f1bf0;
+	} else if (clkdiv == 8) {
+		gur->lbiuiplldcr0 = 0x6c0f1bf0;
+	} else if (clkdiv == 4) {
+		gur->lbiuiplldcr0 = 0x5c0f1bf0;
+	}
+
+	lbc->lcrr |= 0x00030000;
+
+	asm("sync;isync;msync");
+
+	lbc->ltesr = 0xffffffff;	/* Clear LBC error interrupts */
+	lbc->lteir = 0xffffffff;	/* Enable LBC error interrupts */
+}
+
+/*
+ * Initialize SDRAM memory on the Local Bus.
+ */
+void
+sdram_init(void)
+{
+#if defined(CFG_OR3_PRELIM) && defined(CFG_BR3_PRELIM)
+
+	uint idx;
+	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	uint lsdmr_common;
+
+	puts("    SDRAM: ");
+
+	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+
+	/*
+	 * Setup SDRAM Base and Option Registers
+	 */
+	lbc->or3 = CFG_OR3_PRELIM;
+	asm("msync");
+
+	lbc->br3 = CFG_BR3_PRELIM;
+	asm("msync");
+
+	lbc->lbcr = CFG_LBC_LBCR;
+	asm("msync");
+
+
+	lbc->lsrt = CFG_LBC_LSRT;
+	lbc->mrtpr = CFG_LBC_MRTPR;
+	asm("msync");
+
+	/*
+	 * MPC8548 uses "new" 15-16 style addressing.
+	 */
+	lsdmr_common = CFG_LBC_LSDMR_COMMON;
+	lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
+
+	/*
+	 * Issue PRECHARGE ALL command.
+	 */
+	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
+	asm("sync;msync");
+	*sdram_addr = 0xff;
+	ppcDcbf((unsigned long) sdram_addr);
+	udelay(100);
+
+	/*
+	 * Issue 8 AUTO REFRESH commands.
+	 */
+	for (idx = 0; idx < 8; idx++) {
+		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
+		asm("sync;msync");
+		*sdram_addr = 0xff;
+		ppcDcbf((unsigned long) sdram_addr);
+		udelay(100);
+	}
+
+	/*
+	 * Issue 8 MODE-set command.
+	 */
+	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
+	asm("sync;msync");
+	*sdram_addr = 0xff;
+	ppcDcbf((unsigned long) sdram_addr);
+	udelay(100);
+
+	/*
+	 * Issue NORMAL OP command.
+	 */
+	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
+	asm("sync;msync");
+	*sdram_addr = 0xff;
+	ppcDcbf((unsigned long) sdram_addr);
+	udelay(200);    /* Overkill. Must wait > 200 bus cycles */
+
+#endif	/* enable SDRAM init */
+}
+
+#if defined(CFG_DRAM_TEST)
+int
+testdram(void)
+{
+	uint *pstart = (uint *) CFG_MEMTEST_START;
+	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *p;
+
+	printf("Testing DRAM from 0x%08x to 0x%08x\n",
+	       CFG_MEMTEST_START,
+	       CFG_MEMTEST_END);
+
+	printf("DRAM test phase 1:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf ("DRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("DRAM test phase 2:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf ("DRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("DRAM test passed.\n");
+	return 0;
+}
+#endif
+
+#if	!defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ *  fixed_sdram init -- doesn't use serial presence detect.
+ *  assumes 256MB DDR2 SDRAM SODIMM, without ECC, running at DDR400 speed.
+ ************************************************************************/
+long int fixed_sdram (void)
+{
+    #define CFG_DDR_CONTROL 0xc300c000
+
+	volatile ccsr_ddr_t *ddr = (void *)(CFG_MPC85xx_DDR_ADDR);
+
+	ddr->cs0_bnds		= 0x0000007f;
+	ddr->cs1_bnds		= 0x008000ff;
+	ddr->cs2_bnds		= 0x00000000;
+	ddr->cs3_bnds		= 0x00000000;
+	ddr->cs0_config		= 0x80010101;
+	ddr->cs1_config		= 0x80010101;
+	ddr->cs2_config		= 0x00000000;
+	ddr->cs3_config		= 0x00000000;
+	ddr->ext_refrec		= 0x00000000;
+	ddr->timing_cfg_0	= 0x00220802;
+	ddr->timing_cfg_1	= 0x38377322;
+	ddr->timing_cfg_2	= 0x0fa044C7;
+	ddr->sdram_cfg		= 0x4300C000;
+	ddr->sdram_cfg_2	= 0x24401000;
+	ddr->sdram_mode		= 0x23C00542;
+	ddr->sdram_mode_2	= 0x00000000;
+	ddr->sdram_interval	= 0x05080100;
+	ddr->sdram_md_cntl	= 0x00000000;
+	ddr->sdram_data_init	= 0x00000000;
+	ddr->sdram_clk_cntl 	= 0x03800000;
+	asm("sync;isync;msync");
+	udelay(500);
+
+	#if defined (CONFIG_DDR_ECC)
+	  /* Enable ECC checking */
+	  ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+	#else
+	  ddr->sdram_cfg = CFG_DDR_CONTROL;
+	#endif
+
+	return CFG_SDRAM_SIZE * 1024 * 1024;
+}
+#endif
+
+#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
+/* For some reason the Tundra PCI bridge shows up on itself as a
+ * different device.  Work around that by refusing to configure it.
+ */
+void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
+
+static struct pci_config_table pci_sbc8548_config_table[] = {
+	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
+	{0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}},
+	{0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1,
+		mpc85xx_config_via_usbide, {0,0,0}},
+	{0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2,
+		mpc85xx_config_via_usb, {0,0,0}},
+	{0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3,
+		mpc85xx_config_via_usb2, {0,0,0}},
+	{0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5,
+		mpc85xx_config_via_power, {0,0,0}},
+	{0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6,
+		mpc85xx_config_via_ac97, {0,0,0}},
+	{},
+};
+
+static struct pci_controller pci1_hose = {
+	config_table: pci_sbc8548_config_table};
+#endif	/* CONFIG_PCI */
+
+#ifdef CONFIG_PCI2
+static struct pci_controller pci2_hose;
+#endif	/* CONFIG_PCI2 */
+
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif	/* CONFIG_PCIE1 */
+
+int first_free_busno=0;
+
+void
+pci_init_board(void)
+{
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+
+#ifdef CONFIG_PCI1
+{
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pci1_hose;
+	struct pci_config_table *table;
+
+	uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;	/* PORDEVSR[15] */
+	uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;	/* PORDEVSR[14] */
+	uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;	/* PORPLLSR[16] */
+
+	uint pci_agent = (host_agent == 3) || (host_agent == 4 ) || (host_agent == 6);
+
+	uint pci_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
+
+	if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) {
+		printf ("    PCI: %d bit, %s MHz, %s, %s, %s\n",
+			(pci_32) ? 32 : 64,
+			(pci_speed == 33333000) ? "33" :
+			(pci_speed == 66666000) ? "66" : "unknown",
+			pci_clk_sel ? "sync" : "async",
+			pci_agent ? "agent" : "host",
+			pci_arb ? "arbiter" : "external-arbiter"
+			);
+
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCI_MEMORY_BUS,
+			       CFG_PCI_MEMORY_PHYS,
+			       CFG_PCI_MEMORY_SIZE,
+			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+			       CFG_PCI1_MEM_BASE,
+			       CFG_PCI1_MEM_PHYS,
+			       CFG_PCI1_MEM_SIZE,
+			       PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+			       CFG_PCI1_IO_BASE,
+			       CFG_PCI1_IO_PHYS,
+			       CFG_PCI1_IO_SIZE,
+			       PCI_REGION_IO);
+		hose->region_count = 3;
+
+		/* relocate config table pointers */
+		hose->config_table = \
+			(struct pci_config_table *)((uint)hose->config_table + gd->reloc_off);
+		for (table = hose->config_table; table && table->vendor; table++)
+			table->config_device += gd->reloc_off;
+
+		hose->first_busno=first_free_busno;
+		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+		first_free_busno=hose->last_busno+1;
+		printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
+#ifdef CONFIG_PCIX_CHECK
+		if (!(gur->pordevsr & PORDEVSR_PCI)) {
+			/* PCI-X init */
+			if (CONFIG_SYS_CLK_FREQ < 66000000)
+				printf("PCI-X will only work at 66 MHz\n");
+
+			reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
+				| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
+			pci_hose_write_config_word(hose, bus, PCIX_COMMAND, reg16);
+		}
+#endif
+	} else {
+		printf ("    PCI: disabled\n");
+	}
+}
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+#endif
+
+#ifdef CONFIG_PCI2
+{
+	uint pci2_clk_sel = gur->porpllsr & 0x4000;	/* PORPLLSR[17] */
+	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
+	if (pci_dual) {
+		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
+			pci2_clk_sel ? "sync" : "async");
+	} else {
+		printf ("    PCI2: disabled\n");
+	}
+}
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCI2; /* disable */
+#endif /* CONFIG_PCI2 */
+
+#ifdef CONFIG_PCIE1
+{
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pcie1_hose;
+	int pcie_ep =  (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3);
+
+	int pcie_configured  = io_sel >= 1;
+
+	if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
+		printf ("\n    PCIE connected to slot as %s (base address %x)",
+			pcie_ep ? "End Point" : "Root Complex",
+			(uint)pci);
+
+		if (pci->pme_msg_det) {
+			pci->pme_msg_det = 0xffffffff;
+			debug (" with errors.  Clearing.  Now 0x%08x",pci->pme_msg_det);
+		}
+		printf ("\n");
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCI_MEMORY_BUS,
+			       CFG_PCI_MEMORY_PHYS,
+			       CFG_PCI_MEMORY_SIZE,
+			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+			       CFG_PCIE1_MEM_BASE,
+			       CFG_PCIE1_MEM_PHYS,
+			       CFG_PCIE1_MEM_SIZE,
+			       PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+			       CFG_PCIE1_IO_BASE,
+			       CFG_PCIE1_IO_PHYS,
+			       CFG_PCIE1_IO_SIZE,
+			       PCI_REGION_IO);
+
+		hose->region_count = 3;
+
+		hose->first_busno=first_free_busno;
+		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+		printf ("PCIE on bus %d - %d\n",hose->first_busno,hose->last_busno);
+
+		first_free_busno=hose->last_busno+1;
+
+	} else {
+		printf ("    PCIE: disabled\n");
+	}
+ }
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+#endif
+
+}
+
+int last_stage_init(void)
+{
+	return 0;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+	int node, tmp[2];
+	const char *path;
+
+	node = fdt_path_offset(blob, "/aliases");
+	tmp[0] = 0;
+	if (node >= 0) {
+#ifdef CONFIG_PCI1
+		path = fdt_getprop(blob, node, "pci0", NULL);
+		if (path) {
+			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
+#endif
+#ifdef CONFIG_PCIE1
+		path = fdt_getprop(blob, node, "pci1", NULL);
+		if (path) {
+			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+		}
+#endif
+	}
+}
+#endif
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+#ifdef CONFIG_PCI
+	ft_pci_setup(blob, bd);
+#endif
+}
+#endif
+