MPC8240: remove obsolete "OXC" board

The OXC board has long been unmaintained, and is broken.
Remove it.

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 0 insertions, 372 deletions

diff --git a/board/oxc/flash.c b/board/oxc/flash.c
deleted file mode 100644
index 36e0fcac7..000000000
--- a/board/oxc/flash.c
+++ /dev/null
@@ -1,372 +0,0 @@
-/*
- * (C) Copyright 2000
- * Marius Groeger <mgroeger@sysgo.de>
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Flash Routines for STM29W320DB/STM29W800D flash chips
- *
- *--------------------------------------------------------------------
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-
-static ulong flash_get_size (vu_char *addr, flash_info_t *info);
-static int write_byte (flash_info_t *info, ulong dest, uchar data);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-    unsigned long size;
-    int i;
-
-    /* Init: no FLASHes known */
-    for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-	flash_info[i].flash_id = FLASH_UNKNOWN;
-    }
-
-    /*
-     * We use the following trick here: since flash is cyclically
-     * mapped in the 0xFF800000-0xFFFFFFFF area, we detect the type
-     * and the size of flash using 0xFF800000 as the base address,
-     * and then call flash_get_size() again to fill flash_info.
-     */
-    size = flash_get_size((vu_char *)CONFIG_SYS_FLASH_PRELIMBASE, &flash_info[0]);
-    if (size)
-    {
-	flash_get_size((vu_char *)(-size), &flash_info[0]);
-    }
-
-#if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_PRELIMBASE)
-    /* monitor protection ON by default */
-    flash_protect(FLAG_PROTECT_SET,
-		  CONFIG_SYS_MONITOR_BASE,
-		  CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-		  &flash_info[0]);
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
-# ifndef  CONFIG_ENV_SIZE
-#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
-# endif
-    flash_protect(FLAG_PROTECT_SET,
-		  CONFIG_ENV_ADDR,
-		  CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
-		  &flash_info[0]);
-#endif
-
-    return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-    int i;
-
-    if (info->flash_id == FLASH_UNKNOWN) {
-	printf ("missing or unknown FLASH type\n");
-	return;
-    }
-
-    switch (info->flash_id & FLASH_VENDMASK) {
-    case FLASH_MAN_STM:
-	printf ("ST ");
-	break;
-    default:
-	printf ("Unknown Vendor ");
-	break;
-    }
-
-    switch (info->flash_id & FLASH_TYPEMASK) {
-    case FLASH_STM320DB:
-	printf ("M29W320DB (32 Mbit)\n");
-	break;
-    case FLASH_STM800DB:
-	printf ("M29W800DB (8 Mbit, bottom boot block)\n");
-	break;
-    case FLASH_STM800DT:
-	printf ("M29W800DT (8 Mbit, top boot block)\n");
-	break;
-    default:
-	printf ("Unknown Chip Type\n");
-	break;
-    }
-
-    printf ("  Size: %ld KB in %d Sectors\n",
-	    info->size >> 10, info->sector_count);
-
-    printf ("  Sector Start Addresses:");
-    for (i=0; i<info->sector_count; ++i) {
-	if ((i % 5) == 0)
-	    printf ("\n   ");
-	printf (" %08lX%s",
-		info->start[i],
-		info->protect[i] ? " (RO)" : "     "
-		);
-    }
-    printf ("\n");
-    return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_char *addr, flash_info_t *info)
-{
-    short i;
-    uchar vendor, devid;
-    ulong base = (ulong)addr;
-
-    /* Write auto select command: read Manufacturer ID */
-    addr[0x0AAA] = 0xAA;
-    addr[0x0555] = 0x55;
-    addr[0x0AAA] = 0x90;
-
-    udelay(1000);
-
-    vendor = addr[0];
-    devid = addr[2];
-
-    /* only support STM */
-    if ((vendor << 16) != FLASH_MAN_STM) {
-	return 0;
-    }
-
-    if (devid == FLASH_STM320DB) {
-	/* MPC8240 can address maximum 2Mb of flash, that is why the MSB
-	 * lead is grounded and we can access only 2 first Mb */
-	info->flash_id     = vendor << 16 | devid;
-	info->sector_count = 32;
-	info->size         = info->sector_count * 0x10000;
-	for (i = 0; i < info->sector_count; i++) {
-	    info->start[i] = base + i * 0x10000;
-	}
-    }
-    else if (devid == FLASH_STM800DB) {
-	info->flash_id     = vendor << 16 | devid;
-	info->sector_count = 19;
-	info->size         = 0x100000;
-	info->start[0]     = 0x0000;
-	info->start[1]     = 0x4000;
-	info->start[2]     = 0x6000;
-	info->start[3]     = 0x8000;
-	for (i = 4; i < info->sector_count; i++) {
-	    info->start[i] = base + (i-3) * 0x10000;
-	}
-    }
-    else if (devid == FLASH_STM800DT) {
-	info->flash_id     = vendor << 16 | devid;
-	info->sector_count = 19;
-	info->size         = 0x100000;
-	for (i = 0; i < info->sector_count-4; i++) {
-	    info->start[i] = base + i * 0x10000;
-	}
-	info->start[i]     = base + i * 0x10000;
-	info->start[i+1]   = base + i * 0x10000 + 0x8000;
-	info->start[i+2]   = base + i * 0x10000 + 0xa000;
-	info->start[i+3]   = base + i * 0x10000 + 0xc000;
-    }
-    else {
-	return 0;
-    }
-
-    /* mark all sectors as unprotected */
-    for (i = 0; i < info->sector_count; i++) {
-	info->protect[i] = 0;
-    }
-
-    /* Issue the reset command */
-    if (info->flash_id != FLASH_UNKNOWN) {
-	addr[0] = 0xF0;	/* reset bank */
-    }
-
-    return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-    vu_char *addr = (vu_char *)(info->start[0]);
-    int flag, prot, sect, l_sect;
-    ulong start, now, last;
-
-    if ((s_first < 0) || (s_first > s_last)) {
-	if (info->flash_id == FLASH_UNKNOWN) {
-	    printf ("- missing\n");
-	} else {
-	    printf ("- no sectors to erase\n");
-	}
-	return 1;
-    }
-
-    prot = 0;
-    for (sect = s_first; sect <= s_last; sect++) {
-	if (info->protect[sect]) {
-	    prot++;
-	}
-    }
-
-    if (prot) {
-	printf ("- Warning: %d protected sectors will not be erased!\n",
-		prot);
-    } else {
-	printf ("\n");
-    }
-
-    l_sect = -1;
-
-    /* Disable interrupts which might cause a timeout here */
-    flag = disable_interrupts();
-
-    addr[0x0AAA] = 0xAA;
-    addr[0x0555] = 0x55;
-    addr[0x0AAA] = 0x80;
-    addr[0x0AAA] = 0xAA;
-    addr[0x0555] = 0x55;
-
-    /* wait at least 80us - let's wait 1 ms */
-    udelay (1000);
-
-    /* Start erase on unprotected sectors */
-    for (sect = s_first; sect<=s_last; sect++) {
-	if (info->protect[sect] == 0) {	/* not protected */
-	    addr = (vu_char *)(info->start[sect]);
-	    addr[0] = 0x30;
-	    l_sect = sect;
-	}
-    }
-
-    /* re-enable interrupts if necessary */
-    if (flag)
-      enable_interrupts();
-
-    /* wait at least 80us - let's wait 1 ms */
-    udelay (1000);
-
-    /*
-     * We wait for the last triggered sector
-     */
-    if (l_sect < 0)
-      goto DONE;
-
-    start = get_timer (0);
-    last  = start;
-    addr = (vu_char *)(info->start[l_sect]);
-    while ((addr[0] & 0x80) != 0x80) {
-	if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-	    printf ("Timeout\n");
-	    return 1;
-	}
-	/* show that we're waiting */
-	if ((now - last) > 1000) {	/* every second */
-	    serial_putc ('.');
-	    last = now;
-	}
-    }
-
-    DONE:
-    /* reset to read mode */
-    addr = (volatile unsigned char *)info->start[0];
-    addr[0] = 0xF0;	/* reset bank */
-
-    printf (" done\n");
-    return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-    int rc;
-
-    while (cnt > 0) {
-	if ((rc = write_byte(info, addr, *src)) != 0) {
-	    return (rc);
-	}
-	addr++;
-	src++;
-	cnt--;
-    }
-
-    return (0);
-}
-
-/*-----------------------------------------------------------------------
- * Write a byte to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_byte (flash_info_t *info, ulong dest, uchar data)
-{
-    vu_char *addr = (vu_char *)(info->start[0]);
-    ulong start;
-    int flag;
-
-    /* Check if Flash is (sufficiently) erased */
-    if ((*((vu_char *)dest) & data) != data) {
-	return (2);
-    }
-    /* Disable interrupts which might cause a timeout here */
-    flag = disable_interrupts();
-
-    addr[0x0AAA] = 0xAA;
-    addr[0x0555] = 0x55;
-    addr[0x0AAA] = 0xA0;
-
-    *((vu_char *)dest) = data;
-
-    /* re-enable interrupts if necessary */
-    if (flag)
-      enable_interrupts();
-
-    /* data polling for D7 */
-    start = get_timer (0);
-    while ((*((vu_char *)dest) & 0x80) != (data & 0x80)) {
-	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-	    return (1);
-	}
-    }
-    return (0);
-}
-
-/*-----------------------------------------------------------------------
- */