Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  M28: Cleanup memsize.o OOT build
  i.MX28: Move SPL to arch/arm/cpu/arm926ejs/mx28
  M28: Fix typo
  M28: Document that units has to be set to sectors on SD bootcard
  i.mx: i.mx6q: add the initial support for i.mx6q ARM2 board
  i.mx: mxc_gpio: add the i.mx6q support
  i.mx: add the initial support for freescale i.MX6Q processor
  i.mx: introduce the armv7/imx-common folder
  S5PC2XX: Rename S5pc2XX to exynos
  tegra2: Don't use board pointer before it is set up
  tegra2: Remove unneeded 'dynamic ram size' message
  tegra2: Remove unused low-level Tegra2 UART code
  tegra2: Remove unneeded config option
  tegra2: Remove unneeded boot code
  tegra2: Enable instruction cache
  arm: Move CP15 init out of cpu_init_crit()
  tegra2: Simplify tegra_start() boot path
  tegra2: Add arch_cpu_init() to fire up Cortex-A9
  tegra2: Use new GPIO APIs in gpio_config_uart()
  tegra2: Add support for Ventana
  tegra2: Modify MMC driver to handle power and cd GPIOs
  tegra2: Move board_mmc_init into board files

1 files changed, 49 insertions, 32 deletions

diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
index bc67d0f94..7f2827b8b 100644
--- a/board/nvidia/seaboard/seaboard.c
+++ b/board/nvidia/seaboard/seaboard.c
@@ -24,61 +24,78 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/tegra2.h>
+#include <asm/arch/pinmux.h>
 #include <asm/gpio.h>
 #ifdef CONFIG_TEGRA2_MMC
 #include <mmc.h>
 #endif
+#include "../common/board.h"
 
 /*
- * Routine: gpio_config_uart
+ * Routine: gpio_config_uart_seaboard
  * Description: Force GPIO_PI3 low on Seaboard so UART4 works.
  */
-void gpio_config_uart(void)
+static void gpio_config_uart_seaboard(void)
 {
-	int gp = GPIO_PI3;
-	struct gpio_ctlr *gpio = (struct gpio_ctlr *)NV_PA_GPIO_BASE;
-	struct gpio_ctlr_bank *bank = &gpio->gpio_bank[GPIO_BANK(gp)];
-	u32 val;
-
 	/* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
-	val = readl(&bank->gpio_config[GPIO_PORT(gp)]);
-	val |= 1 << GPIO_BIT(gp);
-	writel(val, &bank->gpio_config[GPIO_PORT(gp)]);
-
-	val = readl(&bank->gpio_out[GPIO_PORT(gp)]);
-	val &= ~(1 << GPIO_BIT(gp));
-	writel(val, &bank->gpio_out[GPIO_PORT(gp)]);
+	gpio_request(GPIO_PI3, NULL);
+	gpio_direction_output(GPIO_PI3, 0);
+}
 
-	val = readl(&bank->gpio_dir_out[GPIO_PORT(gp)]);
-	val |= 1 << GPIO_BIT(gp);
-	writel(val, &bank->gpio_dir_out[GPIO_PORT(gp)]);
+void gpio_config_uart(void)
+{
+	if (machine_is_ventana())
+		return;
+	gpio_config_uart_seaboard();
 }
 
 #ifdef CONFIG_TEGRA2_MMC
 /*
- * Routine: gpio_config_mmc
- * Description: Set GPIOs for SDMMC3 SDIO slot.
+ * Routine: pin_mux_mmc
+ * Description: setup the pin muxes/tristate values for the SDMMC(s)
  */
-void gpio_config_mmc(void)
+static void pin_mux_mmc(void)
 {
-	/* Set EN_VDDIO_SD (GPIO I6) */
-	gpio_direction_output(GPIO_PI6, 1);
+	/* SDMMC4: config 3, x8 on 2nd set of pins */
+	pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4);
+	pinmux_set_func(PINGRP_GMA, PMUX_FUNC_SDIO4);
+	pinmux_set_func(PINGRP_GME, PMUX_FUNC_SDIO4);
 
-	/* Config pin as GPI for Card Detect (GPIO I5) */
-	gpio_direction_input(GPIO_PI5);
+	pinmux_tristate_disable(PINGRP_ATB);
+	pinmux_tristate_disable(PINGRP_GMA);
+	pinmux_tristate_disable(PINGRP_GME);
+
+	/* SDMMC3: SDIO3_CLK, SDIO3_CMD, SDIO3_DAT[3:0] */
+	pinmux_set_func(PINGRP_SDB, PMUX_FUNC_SDIO3);
+	pinmux_set_func(PINGRP_SDC, PMUX_FUNC_SDIO3);
+	pinmux_set_func(PINGRP_SDD, PMUX_FUNC_SDIO3);
+
+	pinmux_tristate_disable(PINGRP_SDC);
+	pinmux_tristate_disable(PINGRP_SDD);
+	pinmux_tristate_disable(PINGRP_SDB);
+
+	/* For power GPIO PI6 */
+	pinmux_tristate_disable(PINGRP_ATA);
+	/* For CD GPIO PI5 */
+	pinmux_tristate_disable(PINGRP_ATC);
 }
 
 /* this is a weak define that we are overriding */
-int board_mmc_getcd(u8 *cd, struct mmc *mmc)
+int board_mmc_init(bd_t *bd)
 {
-	debug("board_mmc_getcd called\n");
-	*cd = 1;			/* Assume card is inserted, or eMMC */
+	debug("board_mmc_init called\n");
+
+	/* Enable muxes, etc. for SDMMC controllers */
+	pin_mux_mmc();
+
+	debug("board_mmc_init: init eMMC\n");
+	/* init dev 0, eMMC chip, with 4-bit bus */
+	/* The board has an 8-bit bus, but 8-bit doesn't work yet */
+	tegra2_mmc_init(0, 4, -1, -1);
 
-	if (IS_SD(mmc)) {
-		/* Seaboard SDMMC3 = SDIO3_CD = GPIO_PI5 */
-		if (gpio_get_value(GPIO_PI5))
-			*cd = 0;
-	}
+	debug("board_mmc_init: init SD slot\n");
+	/* init dev 1, SD slot, with 4-bit bus */
+	tegra2_mmc_init(1, 4, GPIO_PI6, GPIO_PI5);
 
 	return 0;
 }