Minor code cleanup

1 files changed, 0 insertions, 60 deletions

diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c
index acc0e0686..d1c99fdd8 100644
--- a/board/mcc200/mcc200.c
+++ b/board/mcc200/mcc200.c
@@ -28,19 +28,12 @@
 #include <mpc5xxx.h>
 #include <pci.h>
 
-//###CHD: es gibt eigentlich kein DDR bei uns -> weg damit!; dto. PCI!
-#if defined(CONFIG_MPC5200_DDR)
-#include "mt46v16m16-75.h"
-#else
-//#include "mt48lc16m16a2-75.h"
 #include "mt48lc8m32b2-6-7.h"
-#endif
 
 extern flash_info_t flash_info[];	/* FLASH chips info */
 
 ulong flash_get_size (ulong base, int banknum);
 
-//###CHD: wenn RAMBOOT gehen wuerde, ....
 #ifndef CFG_RAMBOOT
 static void sdram_start (int hi_addr)
 {
@@ -88,7 +81,6 @@ static void sdram_start (int hi_addr)
  *            is something else than 0x00000000.
  */
 
-#if defined(CONFIG_MPC5200)
 long int initdram (int board_type)
 {
 	ulong dramsize = 0;
@@ -190,58 +182,6 @@ long int initdram (int board_type)
 	return dramsize + dramsize2;
 }
 
-//###CHD: sowas gibt es bei usn nicht!
-#elif defined(CONFIG_MGT5100)
-
-long int initdram (int board_type)
-{
-	ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
-	ulong test1, test2;
-
-	/* setup and enable SDRAM chip selects */
-	*(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
-	*(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
-	*(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-
-	/* address select register */
-	*(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
-	__asm__ volatile ("sync");
-
-	/* find RAM size */
-	sdram_start(0);
-	test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
-	sdram_start(1);
-	test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* set SDRAM end address according to size */
-	*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
-#else /* CFG_RAMBOOT */
-
-	/* Retrieve amount of SDRAM available */
-	dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-
-#endif /* CFG_RAMBOOT */
-
-	return dramsize;
-}
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
-
 int checkboard (void)
 {
 	puts ("Board: MCC200\n");