x86: Remove eNET boards

These are no longer used and should be removed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Graeme Russ <graeme.russ@gmail.com>

1 files changed, 0 insertions, 284 deletions

diff --git a/board/eNET/eNET.c b/board/eNET/eNET.c
deleted file mode 100644
index 2f26470cb..000000000
--- a/board/eNET/eNET.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * (C) Copyright 2008
- * Graeme Russ, graeme.russ@gmail.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/sc520.h>
-#include <net.h>
-#include <netdev.h>
-
-#ifdef CONFIG_HW_WATCHDOG
-#include <watchdog.h>
-#endif
-
-#include "hardware.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN;
-
-static void enet_timer_isr(void);
-static void enet_toggle_run_led(void);
-static void enet_setup_pars(void);
-
-/*
- * Miscellaneous platform dependent initializations
- */
-int board_early_init_f(void)
-{
-	u16 pio_out_cfg = 0x0000;
-
-	/* Configure General Purpose Bus timing */
-	writeb(CONFIG_SYS_SC520_GPCSRT, &sc520_mmcr->gpcsrt);
-	writeb(CONFIG_SYS_SC520_GPCSPW, &sc520_mmcr->gpcspw);
-	writeb(CONFIG_SYS_SC520_GPCSOFF, &sc520_mmcr->gpcsoff);
-	writeb(CONFIG_SYS_SC520_GPRDW, &sc520_mmcr->gprdw);
-	writeb(CONFIG_SYS_SC520_GPRDOFF, &sc520_mmcr->gprdoff);
-	writeb(CONFIG_SYS_SC520_GPWRW, &sc520_mmcr->gpwrw);
-	writeb(CONFIG_SYS_SC520_GPWROFF, &sc520_mmcr->gpwroff);
-
-	/* Configure Programmable Input/Output Pins */
-	writew(CONFIG_SYS_SC520_PIODIR15_0, &sc520_mmcr->piodir15_0);
-	writew(CONFIG_SYS_SC520_PIODIR31_16, &sc520_mmcr->piodir31_16);
-	writew(CONFIG_SYS_SC520_PIOPFS31_16, &sc520_mmcr->piopfs31_16);
-	writew(CONFIG_SYS_SC520_PIOPFS15_0, &sc520_mmcr->piopfs15_0);
-	writeb(CONFIG_SYS_SC520_CSPFS, &sc520_mmcr->cspfs);
-	writeb(CONFIG_SYS_SC520_CLKSEL, &sc520_mmcr->clksel);
-
-	/*
-	 * Turn off top board
-	 * Set StrataFlash chips to 16-bit width
-	 * Set StrataFlash chips to normal (non reset/power down) mode
-	 */
-	pio_out_cfg |= CONFIG_SYS_ENET_TOP_BRD_PWR;
-	pio_out_cfg |= CONFIG_SYS_ENET_SF_WIDTH;
-	pio_out_cfg |= CONFIG_SYS_ENET_SF1_MODE;
-	pio_out_cfg |= CONFIG_SYS_ENET_SF2_MODE;
-	writew(pio_out_cfg, &sc520_mmcr->pioset15_0);
-
-	/* Turn off auxiliary power output */
-	writew(CONFIG_SYS_ENET_AUX_PWR, &sc520_mmcr->pioclr15_0);
-
-	/* Clear FPGA program mode */
-	writew(CONFIG_SYS_ENET_FPGA_PROG, &sc520_mmcr->pioset31_16);
-
-	enet_setup_pars();
-
-	/* Disable Watchdog */
-	writew(0x3333, &sc520_mmcr->wdtmrctl);
-	writew(0xcccc, &sc520_mmcr->wdtmrctl);
-	writew(0x0000, &sc520_mmcr->wdtmrctl);
-
-	/* Chip Select Configuration */
-	writew(CONFIG_SYS_SC520_BOOTCS_CTRL, &sc520_mmcr->bootcsctl);
-	writew(CONFIG_SYS_SC520_ROMCS1_CTRL, &sc520_mmcr->romcs1ctl);
-	writew(CONFIG_SYS_SC520_ROMCS2_CTRL, &sc520_mmcr->romcs2ctl);
-
-	writeb(CONFIG_SYS_SC520_ADDDECCTL, &sc520_mmcr->adddecctl);
-	writeb(CONFIG_SYS_SC520_UART1CTL, &sc520_mmcr->uart1ctl);
-	writeb(CONFIG_SYS_SC520_UART2CTL, &sc520_mmcr->uart2ctl);
-
-	writeb(CONFIG_SYS_SC520_SYSARBCTL, &sc520_mmcr->sysarbctl);
-	writew(CONFIG_SYS_SC520_SYSARBMENB, &sc520_mmcr->sysarbmenb);
-
-	/* enable posted-writes */
-	writeb(CONFIG_SYS_SC520_HBCTL, &sc520_mmcr->hbctl);
-
-	return 0;
-}
-
-static void enet_setup_pars(void)
-{
-	/*
-	 * PARs 11 and 12 are 2MB SRAM @ 0x19000000
-	 *
-	 * These are setup now because older version of U-Boot have them
-	 * mapped to a different PAR which gets clobbered which prevents
-	 * using SRAM for warm-booting a new image
-	 */
-	writel(CONFIG_SYS_SC520_SRAM1_PAR, &sc520_mmcr->par[11]);
-	writel(CONFIG_SYS_SC520_SRAM2_PAR, &sc520_mmcr->par[12]);
-
-	/* PARs 0 and 1 are Compact Flash slots (4kB each) */
-	writel(CONFIG_SYS_SC520_CF1_PAR, &sc520_mmcr->par[0]);
-	writel(CONFIG_SYS_SC520_CF2_PAR, &sc520_mmcr->par[1]);
-
-	/* PAR 2 is used for Cache-As-RAM */
-
-	/*
-	 * PARs 5 through 8 are additional NS16550 UARTS
-	 * 8 bytes each @ 0x013f8, 0x012f8, 0x011f8 and 0x010f8
-	 */
-	writel(CONFIG_SYS_SC520_UARTA_PAR, &sc520_mmcr->par[5]);
-	writel(CONFIG_SYS_SC520_UARTB_PAR, &sc520_mmcr->par[6]);
-	writel(CONFIG_SYS_SC520_UARTC_PAR, &sc520_mmcr->par[7]);
-	writel(CONFIG_SYS_SC520_UARTD_PAR, &sc520_mmcr->par[8]);
-
-	/* PARs 9 and 10 are 32MB StrataFlash @ 0x10000000 */
-	writel(CONFIG_SYS_SC520_SF1_PAR, &sc520_mmcr->par[9]);
-	writel(CONFIG_SYS_SC520_SF2_PAR, &sc520_mmcr->par[10]);
-
-	/* PAR 13 is 4kB DPRAM @ 0x18100000 (implemented in FPGA) */
-	writel(CONFIG_SYS_SC520_DPRAM_PAR, &sc520_mmcr->par[13]);
-
-	/*
-	 * PAR 14 is Low Level I/O (LEDs, Hex Switches etc)
-	 * Already configured in board_init16 (eNET_start16.S)
-	 *
-	 * PAR 15 is Boot ROM
-	 * Already configured in board_init16 (eNET_start16.S)
-	 */
-}
-
-
-int board_early_init_r(void)
-{
-	/* CPU Speed to 100MHz */
-	gd->cpu_clk = 100000000;
-
-	/* Crystal is 33.000MHz */
-	gd->bus_clk = 33000000;
-
-	return 0;
-}
-
-void show_boot_progress(int val)
-{
-	uchar led_mask;
-
-	led_mask = 0x00;
-
-	if (val < 0)
-		led_mask |= LED_ERR_BITMASK;
-
-	led_mask |= (uchar)(val & 0x001f);
-	outb(led_mask, LED_LATCH_ADDRESS);
-}
-
-
-int last_stage_init(void)
-{
-	outb(0x00, LED_LATCH_ADDRESS);
-
-	register_timer_isr(enet_timer_isr);
-
-	printf("Serck Controls eNET\n");
-
-	return 0;
-}
-
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
-{
-	if (banknum == 0) {	/* non-CFI boot flash */
-		info->portwidth = FLASH_CFI_8BIT;
-		info->chipwidth = FLASH_CFI_BY8;
-		info->interface = FLASH_CFI_X8;
-		return 1;
-	} else {
-		return 0;
-	}
-}
-
-int board_eth_init(bd_t *bis)
-{
-	return pci_eth_init(bis);
-}
-
-void setup_pcat_compatibility()
-{
-	/* disable global interrupt mode */
-	writeb(0x40, &sc520_mmcr->picicr);
-
-	/* set all irqs to edge */
-	writeb(0x00, &sc520_mmcr->pic_mode[0]);
-	writeb(0x00, &sc520_mmcr->pic_mode[1]);
-	writeb(0x00, &sc520_mmcr->pic_mode[2]);
-
-	/*
-	 *  active low polarity on PIC interrupt pins,
-	 *  active high polarity on all other irq pins
-	 */
-	writew(0x0000, &sc520_mmcr->intpinpol);
-
-	/*
-	 * PIT 0 -> IRQ0
-	 * RTC -> IRQ8
-	 * FP error -> IRQ13
-	 * UART1 -> IRQ4
-	 * UART2 -> IRQ3
-	 */
-	writeb(SC520_IRQ0, &sc520_mmcr->pit_int_map[0]);
-	writeb(SC520_IRQ8, &sc520_mmcr->rtcmap);
-	writeb(SC520_IRQ13, &sc520_mmcr->ferrmap);
-	writeb(SC520_IRQ4, &sc520_mmcr->uart_int_map[0]);
-	writeb(SC520_IRQ3, &sc520_mmcr->uart_int_map[1]);
-
-	/* Disable all other interrupt sources */
-	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_tmr_int_map[0]);
-	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_tmr_int_map[1]);
-	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_tmr_int_map[2]);
-	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pit_int_map[1]);
-	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pit_int_map[2]);
-	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->ssimap);
-	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->wdtmap);
-	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->wpvmap);
-	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->icemap);
-}
-
-void enet_timer_isr(void)
-{
-	static long enet_ticks;
-
-	enet_ticks++;
-
-	/* Toggle Watchdog every 100ms */
-	if ((enet_ticks % 100) == 0)
-		hw_watchdog_reset();
-
-	/* Toggle Run LED every 500ms */
-	if ((enet_ticks % 500) == 0)
-		enet_toggle_run_led();
-}
-
-void hw_watchdog_reset(void)
-{
-	/* Watchdog Reset must be atomic */
-	long flag = disable_interrupts();
-
-	if (sc520_mmcr->piodata15_0 & WATCHDOG_PIO_BIT)
-		sc520_mmcr->pioclr15_0 = WATCHDOG_PIO_BIT;
-	else
-		sc520_mmcr->pioset15_0 = WATCHDOG_PIO_BIT;
-
-	if (flag)
-		enable_interrupts();
-}
-
-void enet_toggle_run_led(void)
-{
-	unsigned char leds_state = inb(LED_LATCH_ADDRESS);
-	if (leds_state & LED_RUN_BITMASK)
-		outb(leds_state & ~LED_RUN_BITMASK, LED_LATCH_ADDRESS);
-	else
-		outb(leds_state | LED_RUN_BITMASK, LED_LATCH_ADDRESS);
-}