Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  ARM: Add Calxeda Highbank platform
  dkb: make mmc command as default enabled
  Marvell: dkb: add mmc support
  ARM: pantheon: add mmc definition
  davinci: remove config.mk file from the sources
  ARM:AM33XX: Add support for TI AM335X EVM
  ARM:AM33XX: Added timer support
  ARM:AM33XX: Add emif/ddr support
  ARM:AM33XX: Add clock definitions
  ARM:AM33XX: Added support for AM33xx
  omap3/emif4: fix registers definition
  davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM
  davinci: emac: add support for more than 1 PHYs
  davinci: emac: add new features to autonegotiate for EMAC
  da850evm: Move LPSC configuration to board_early_init_f()
  omap4_panda: Build in cmd_gpio support on panda
  omap: Don't use gpio_free to change direction to input
  mmc: omap: Allow OMAP_HSMMC[23]_BASE to be unset
  OMAP3: overo : Add environment variable optargs to bootargs
  OMAP3: overo: Move ethernet CS4 configuration to execute based on board id
  OMAP3: overo : Use ttyO2 instead of ttyS2.
  da830: add support for NAND boot mode
  dm36x: revert cache disable patch
  dm644X: revert cache disable patch
  devkit8000: Add malloc space
  omap: spl: fix build break due to changes in FAT
  OMAP3 SPL: Provide weak omap_rev_string
  omap: beagle: Use ubifs instead of jffs2 for nand boot
  omap: overo: Disable pull-ups on camera PCLK, HS and VS signals
  omap: overo: Configure mux for gpio10
  SPL: Add DMA library
  omap3: Add interface for omap3 DMA
  omap3: Add DMA register accessors
  omap3: Add Base register for DMA
  arm, davinci: add missing LSPC define for MMC/SD1
  U-Boot/SPL: omap4: Make ddr pre-calculated timings as default.
  DaVinci: correct MDSTAT.STATE mask
  omap4: splitting padconfs into common, 4430 and 4460
  omap4: adding revision detection for 4460 ES1.1
  omap4: replacing OMAP4_CONTROL with OMAP4430_CONTROL
  gplug: fixed build error as a result of code cleanup patch
  kirkwood_spi: add dummy spi_init()
  gpio: mvmfp: reduce include platform file
  ARM: orion5x: reduce dependence of including platform file
  serial: reduce include platform file for marvell chip
  ARM: kirkwood: reduce dependence of including platform file
  ARM: armada100: reduce dependence of including platform file
  ARM: pantheon: reduce dependence of including platform file
  Armada100: Add env storage support for Marvell gplugD
  Armada100: Add SPI flash support for Marvell gplugD
  Armada100: Add SPI support for Marvell gplugD
  SPI: Add SPI driver support for Marvell Armada100
  dreamplug: initial board support.
  imx: fix coding style
  misc: pmic: drop old Freescale's pmic driver
  MX31: mx31pdk: use new pmic driver
  MX31: mx31ads: use new pmic driver
  MX31: mx31_litekit: use new pmic driver
  MX5: mx53evk: use new pmic driver
  MX5: mx51evk: use new pmic driver
  MX35: mx35pdk: use new pmic driver
  misc: pmic: addI2C  support to pmic_fsl driver
  misc: pmic: use I2C_SET_BUS in pmic I2C
  MX5: efikamx/efikasb: use new pmic driver
  MX3: qong: use new pmic driver
  RTC: Switch mc13783 to generic pmic code
  MX5: vision2: use new pmic driver
  misc: pmic: Freescale PMIC switches to generic PMIC driver
  misc:pmic:samsung Enable PMIC driver at GONI target
  misc:pmic:max8998 MAX8998 support at a new PMIC driver.
  misc:pmic:core New generic PMIC driver
  mx31pdk: Remove unneeded config
  mx31: provide readable WEIM CS accessor
  MX51: vision2: Set global macros
  I2C: Add i2c_get/set_speed() to mxc_i2c.c
  ARM: Update mach-types
  devkit8000: Add config to enable SPL MMC boot
  devkit8000: protect board_mmc_init
  arm, post: add missing post_time_ms for arm
  cosmetic, post: Codingstyle cleanup
  arm, logbuffer: make it compileclean
  tegra2: Enable MMC for Seaboard
  tegra2: Add more pinmux functions
  tegra2: Rename PIN_ to PINGRP_
  tegra2: Add more clock functions
  tegra2: Clean up board code a little
  tegra2: Rename CLOCK_PLL_ID to CLOCK_ID

1 files changed, 63 insertions, 0 deletions

diff --git a/board/davinci/da8xxevm/da830evm.c b/board/davinci/da8xxevm/da830evm.c
index 06506537b..2021e7324 100644
--- a/board/davinci/da8xxevm/da830evm.c
+++ b/board/davinci/da8xxevm/da830evm.c
@@ -40,6 +40,8 @@
 #include <asm/arch/emif_defs.h>
 #include <asm/arch/emac_defs.h>
 #include <asm/io.h>
+#include <nand.h>
+#include <asm/arch/nand_defs.h>
 #include <asm/arch/davinci_misc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -98,6 +100,56 @@ static const struct pinmux_config i2c_pins[] = {
 	{ pinmux(8), 2, 4 }
 };
 
+#ifdef CONFIG_USE_NAND
+/* NAND pin muxer settings */
+const struct pinmux_config aemif_pins[] = {
+	{ pinmux(13), 1, 6 },
+	{ pinmux(13), 1, 7 },
+	{ pinmux(14), 1, 0 },
+	{ pinmux(14), 1, 1 },
+	{ pinmux(14), 1, 2 },
+	{ pinmux(14), 1, 3 },
+	{ pinmux(14), 1, 4 },
+	{ pinmux(14), 1, 5 },
+	{ pinmux(14), 1, 6 },
+	{ pinmux(14), 1, 7 },
+	{ pinmux(15), 1, 0 },
+	{ pinmux(15), 1, 1 },
+	{ pinmux(15), 1, 2 },
+	{ pinmux(15), 1, 3 },
+	{ pinmux(15), 1, 4 },
+	{ pinmux(15), 1, 5 },
+	{ pinmux(15), 1, 6 },
+	{ pinmux(15), 1, 7 },
+	{ pinmux(16), 1, 0 },
+	{ pinmux(16), 1, 1 },
+	{ pinmux(16), 1, 2 },
+	{ pinmux(16), 1, 3 },
+	{ pinmux(16), 1, 4 },
+	{ pinmux(16), 1, 5 },
+	{ pinmux(16), 1, 6 },
+	{ pinmux(16), 1, 7 },
+	{ pinmux(17), 1, 0 },
+	{ pinmux(17), 1, 1 },
+	{ pinmux(17), 1, 2 },
+	{ pinmux(17), 1, 3 },
+	{ pinmux(17), 1, 4 },
+	{ pinmux(17), 1, 5 },
+	{ pinmux(17), 1, 6 },
+	{ pinmux(17), 1, 7 },
+	{ pinmux(18), 1, 0 },
+	{ pinmux(18), 1, 1 },
+	{ pinmux(18), 1, 2 },
+	{ pinmux(18), 1, 3 },
+	{ pinmux(18), 1, 4 },
+	{ pinmux(18), 1, 5 },
+	{ pinmux(18), 1, 6 },
+	{ pinmux(18), 1, 7 },
+	{ pinmux(10), 1, 0 }
+};
+#endif
+
+
 /* USB0_DRVVBUS pin muxer settings */
 static const struct pinmux_config usb_pins[] = {
 	{ pinmux(9), 1, 1 }
@@ -114,6 +166,7 @@ static const struct pinmux_resource pinmuxes[] = {
 #endif
 #ifdef CONFIG_USE_NAND
 	PINMUX_ITEM(emifa_nand_pins),
+	PINMUX_ITEM(aemif_pins),
 #endif
 #if defined(CONFIG_DRIVER_TI_EMAC)
 	PINMUX_ITEM(emac_pins),
@@ -184,6 +237,16 @@ int board_init(void)
 	return(0);
 }
 
+
+#ifdef CONFIG_NAND_DAVINCI
+int board_nand_init(struct nand_chip *nand)
+{
+	davinci_nand_init(nand);
+
+	return 0;
+}
+#endif
+
 #if defined(CONFIG_DRIVER_TI_EMAC)
 
 #define PHY_SW_I2C_ADDR	0x5f /* Address of PHY on i2c bus */