Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  tegra: define fdt_load/fdt_high variables
  tegra: enable bootz command
  tegra: usb: Fix device enumeration problem of USB1
  tegra: trimslice: set up serial flash pinmux
  tegra: add pin_mux_spi() board initialization function
  tegra: add GMC/GMD funcmux entry for SFLASH
  tegra: bootcmd: start USB only when needed
  tegra: bootcmd enhancements
  tegra: add enterrcm command
  tegra: enable CONFIG_ENV_VARS_UBOOT_CONFIG
  Add env vars describing U-Boot target board
  tegra: usb: fix wrong error check
  tegra: add ULPI on USB2 funcmux entry
  tegra: fix leftover CONFIG_TEGRA2_MMC & _SPI build switches
  tegra: Add Tamonten Evaluation Carrier support
  tegra: Use SD write-protect GPIO on Tamonten
  tegra: Implement gpio_early_init() on Tamonten
  tegra: Allow boards to perform early GPIO setup
  tegra: plutux: Add device tree support
  tegra: medcom: Add device tree support
  tegra: Rework Tamonten support
  beagle: add eeprom expansion board info for bct brettl4

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 58 insertions, 0 deletions

diff --git a/board/avionic-design/dts/tegra2-tec.dts b/board/avionic-design/dts/tegra2-tec.dts
new file mode 100644
index 000000000..9faebd8bc
--- /dev/null
+++ b/board/avionic-design/dts/tegra2-tec.dts
@@ -0,0 +1,58 @@
+/dts-v1/;
+
+/include/ ARCH_CPU_DTS
+
+/ {
+	model = "Avionic Design Tamonten Evaluation Carrier";
+	compatible = "avionic-design,tec", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	clocks {
+		clk_32k: clk_32k {
+			clock-frequency = <32000>;
+		};
+
+		osc {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	clock@60006000 {
+		clocks = <&clk_32k &osc>;
+	};
+
+	serial@70006300 {
+		clock-frequency = <216000000>;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+
+	usb@c5000000 {
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+};