Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

1 files changed, 224 insertions, 0 deletions

diff --git a/board/armadeus/apf27/fpga.c b/board/armadeus/apf27/fpga.c
new file mode 100644
index 000000000..0c08c0640
--- /dev/null
+++ b/board/armadeus/apf27/fpga.c
@@ -0,0 +1,224 @@
+/*
+ * (C) Copyright 2002-2013
+ * Eric Jarrige <eric.jarrige@armadeus.org>
+ *
+ * based on the files by
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com
+ * and
+ * Keith Outwater, keith_outwater@mvis.com
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+#include <common.h>
+
+#include <asm/arch/imx-regs.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <command.h>
+#include <config.h>
+#include "fpga.h"
+#include <spartan3.h>
+#include "apf27.h"
+
+/*
+ * Note that these are pointers to code that is in Flash.  They will be
+ * relocated at runtime.
+ * Spartan2 code is used to download our Spartan 3 :) code is compatible.
+ * Just take care about the file size
+ */
+Xilinx_Spartan3_Slave_Parallel_fns fpga_fns = {
+	fpga_pre_fn,
+	fpga_pgm_fn,
+	fpga_init_fn,
+	NULL,
+	fpga_done_fn,
+	fpga_clk_fn,
+	fpga_cs_fn,
+	fpga_wr_fn,
+	fpga_rdata_fn,
+	fpga_wdata_fn,
+	fpga_busy_fn,
+	fpga_abort_fn,
+	fpga_post_fn,
+};
+
+Xilinx_desc fpga[CONFIG_FPGA_COUNT] = {
+	{Xilinx_Spartan3,
+	 slave_parallel,
+	 1196128l/8,
+	 (void *)&fpga_fns,
+	 0,
+	 "3s200aft256"}
+};
+
+/*
+ * Initialize GPIO port B before download
+ */
+int fpga_pre_fn(int cookie)
+{
+	/* Initialize GPIO pins */
+	gpio_set_value(ACFG_FPGA_PWR, 1);
+	imx_gpio_mode(ACFG_FPGA_INIT | GPIO_IN | GPIO_PUEN | GPIO_GPIO);
+	imx_gpio_mode(ACFG_FPGA_DONE | GPIO_IN | GPIO_PUEN | GPIO_GPIO);
+	imx_gpio_mode(ACFG_FPGA_PRG | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
+	imx_gpio_mode(ACFG_FPGA_CLK | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
+	imx_gpio_mode(ACFG_FPGA_RW | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
+	imx_gpio_mode(ACFG_FPGA_CS | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
+	imx_gpio_mode(ACFG_FPGA_SUSPEND|GPIO_OUT|GPIO_PUEN|GPIO_GPIO);
+	gpio_set_value(ACFG_FPGA_RESET, 1);
+	imx_gpio_mode(ACFG_FPGA_RESET | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
+	imx_gpio_mode(ACFG_FPGA_PWR | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
+	gpio_set_value(ACFG_FPGA_PRG, 1);
+	gpio_set_value(ACFG_FPGA_CLK, 1);
+	gpio_set_value(ACFG_FPGA_RW, 1);
+	gpio_set_value(ACFG_FPGA_CS, 1);
+	gpio_set_value(ACFG_FPGA_SUSPEND, 0);
+	gpio_set_value(ACFG_FPGA_PWR, 0);
+	udelay(30000); /*wait until supply started*/
+
+	return cookie;
+}
+
+/*
+ * Set the FPGA's active-low program line to the specified level
+ */
+int fpga_pgm_fn(int assert, int flush, int cookie)
+{
+	debug("%s:%d: FPGA PROGRAM %s", __func__, __LINE__,
+	      assert ? "high" : "low");
+	gpio_set_value(ACFG_FPGA_PRG, !assert);
+	return assert;
+}
+
+/*
+ * Set the FPGA's active-high clock line to the specified level
+ */
+int fpga_clk_fn(int assert_clk, int flush, int cookie)
+{
+	debug("%s:%d: FPGA CLOCK %s", __func__, __LINE__,
+	      assert_clk ? "high" : "low");
+	gpio_set_value(ACFG_FPGA_CLK, !assert_clk);
+	return assert_clk;
+}
+
+/*
+ * Test the state of the active-low FPGA INIT line.  Return 1 on INIT
+ * asserted (low).
+ */
+int fpga_init_fn(int cookie)
+{
+	int value;
+	debug("%s:%d: INIT check... ", __func__, __LINE__);
+	value = gpio_get_value(ACFG_FPGA_INIT);
+	/* printf("init value read %x",value); */
+#ifdef CONFIG_SYS_FPGA_IS_PROTO
+	return value;
+#else
+	return !value;
+#endif
+}
+
+/*
+ * Test the state of the active-high FPGA DONE pin
+ */
+int fpga_done_fn(int cookie)
+{
+	debug("%s:%d: DONE check... %s", __func__, __LINE__,
+	      gpio_get_value(ACFG_FPGA_DONE) ? "high" : "low");
+	return gpio_get_value(ACFG_FPGA_DONE) ? FPGA_SUCCESS : FPGA_FAIL;
+}
+
+/*
+ * Set the FPGA's wr line to the specified level
+ */
+int fpga_wr_fn(int assert_write, int flush, int cookie)
+{
+	debug("%s:%d: FPGA RW... %s ", __func__, __LINE__,
+	      assert_write ? "high" : "low");
+	gpio_set_value(ACFG_FPGA_RW, !assert_write);
+	return assert_write;
+}
+
+int fpga_cs_fn(int assert_cs, int flush, int cookie)
+{
+	debug("%s:%d: FPGA CS %s ", __func__, __LINE__,
+	      assert_cs ? "high" : "low");
+	gpio_set_value(ACFG_FPGA_CS, !assert_cs);
+	return assert_cs;
+}
+
+int fpga_rdata_fn(unsigned char *data, int cookie)
+{
+	debug("%s:%d: FPGA READ DATA %02X ", __func__, __LINE__,
+	      *((char *)ACFG_FPGA_RDATA));
+	*data = (unsigned char)
+		((*((unsigned short *)ACFG_FPGA_RDATA))&0x00FF);
+	return *data;
+}
+
+int fpga_wdata_fn(unsigned char data, int flush, int cookie)
+{
+	debug("%s:%d: FPGA WRITE DATA %02X ", __func__, __LINE__,
+	      data);
+	*((unsigned short *)ACFG_FPGA_WDATA) = data;
+	return data;
+}
+
+int fpga_abort_fn(int cookie)
+{
+	return fpga_post_fn(cookie);
+}
+
+
+int fpga_busy_fn(int cookie)
+{
+	return 1;
+}
+
+int fpga_post_fn(int cookie)
+{
+	debug("%s:%d: FPGA POST ", __func__, __LINE__);
+
+	imx_gpio_mode(ACFG_FPGA_RW | GPIO_PF | GPIO_PUEN);
+	imx_gpio_mode(ACFG_FPGA_CS | GPIO_PF | GPIO_PUEN);
+	imx_gpio_mode(ACFG_FPGA_CLK | GPIO_PF | GPIO_PUEN);
+	gpio_set_value(ACFG_FPGA_PRG, 1);
+	gpio_set_value(ACFG_FPGA_RESET, 0);
+	imx_gpio_mode(ACFG_FPGA_RESET | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
+	return cookie;
+}
+
+void apf27_fpga_setup(void)
+{
+	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+	struct system_control_regs *system =
+		(struct system_control_regs *)IMX_SYSTEM_CTL_BASE;
+
+	/* Configure FPGA CLKO */
+	writel(ACFG_CCSR_VAL, &pll->ccsr);
+
+	/* Configure strentgh for FPGA */
+	writel(ACFG_DSCR10_VAL, &system->dscr10);
+	writel(ACFG_DSCR3_VAL, &system->dscr3);
+	writel(ACFG_DSCR7_VAL, &system->dscr7);
+	writel(ACFG_DSCR2_VAL, &system->dscr2);
+}
+
+/*
+ * Initialize the fpga.  Return 1 on success, 0 on failure.
+ */
+void APF27_init_fpga(void)
+{
+	int i;
+
+	apf27_fpga_setup();
+
+	fpga_init();
+
+	for (i = 0; i < CONFIG_FPGA_COUNT; i++) {
+		debug("%s:%d: Adding fpga %d\n", __func__, __LINE__, i);
+		fpga_add(fpga_xilinx, &fpga[i]);
+	}
+
+	return;
+}