Move arch/ppc to arch/powerpc

As discussed on the list, move "arch/ppc" to "arch/powerpc" to
better match the Linux directory structure.

Please note that this patch also changes the "ppc" target in
MAKEALL to "powerpc" to match this new infrastructure. But "ppc"
is kept as an alias for now, to not break compatibility with
scripts using this name.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Anatolij Gustschin <agust@denx.de>

1 files changed, 311 insertions, 0 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
new file mode 100644
index 000000000..0b5b9da03
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -0,0 +1,311 @@
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ * Kumar Gala <kumar.gala@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <mpc85xx.h>
+#include <version.h>
+
+#define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+/* To boot secondary cpus, we need a place for them to start up.
+ * Normally, they start at 0xfffffffc, but that's usually the
+ * firmware, and we don't want to have to run the firmware again.
+ * Instead, the primary cpu will set the BPTR to point here to
+ * this page.  We then set up the core, and head to
+ * start_secondary.  Note that this means that the code below
+ * must never exceed 1023 instructions (the branch at the end
+ * would then be the 1024th).
+ */
+	.globl	__secondary_start_page
+	.align	12
+__secondary_start_page:
+/* First do some preliminary setup */
+	lis	r3, HID0_EMCP@h		/* enable machine check */
+#ifndef CONFIG_E500MC
+	ori	r3,r3,HID0_TBEN@l	/* enable Timebase */
+#endif
+#ifdef CONFIG_PHYS_64BIT
+	ori	r3,r3,HID0_ENMAS7@l	/* enable MAS7 updates */
+#endif
+	mtspr	SPRN_HID0,r3
+
+#ifndef CONFIG_E500MC
+	li	r3,(HID1_ASTME|HID1_ABE)@l	/* Addr streaming & broadcast */
+	mfspr   r0,PVR
+	andi.	r0,r0,0xff
+	cmpwi	r0,0x50@l	/* if we are rev 5.0 or greater set MBDD */
+	blt 1f
+	/* Set MBDD bit also */
+	ori r3, r3, HID1_MBDD@l
+1:
+	mtspr	SPRN_HID1,r3
+#endif
+
+	/* Enable branch prediction */
+	lis	r3,BUCSR_ENABLE@h
+	ori	r3,r3,BUCSR_ENABLE@l
+	mtspr	SPRN_BUCSR,r3
+
+	/* Ensure TB is 0 */
+	li	r3,0
+	mttbl	r3
+	mttbu	r3
+
+	/* Enable/invalidate the I-Cache */
+	lis	r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h
+	ori	r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l
+	mtspr	SPRN_L1CSR1,r2
+1:
+	mfspr	r3,SPRN_L1CSR1
+	and.	r1,r3,r2
+	bne	1b
+
+	lis	r3,(L1CSR1_CPE|L1CSR1_ICE)@h
+	ori	r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l
+	mtspr	SPRN_L1CSR1,r3
+	isync
+2:
+	mfspr	r3,SPRN_L1CSR1
+	andi.	r1,r3,L1CSR1_ICE@l
+	beq	2b
+
+	/* Enable/invalidate the D-Cache */
+	lis	r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h
+	ori	r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l
+	mtspr	SPRN_L1CSR0,r2
+1:
+	mfspr	r3,SPRN_L1CSR0
+	and.	r1,r3,r2
+	bne	1b
+
+	lis	r3,(L1CSR0_CPE|L1CSR0_DCE)@h
+	ori	r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l
+	mtspr	SPRN_L1CSR0,r3
+	isync
+2:
+	mfspr	r3,SPRN_L1CSR0
+	andi.	r1,r3,L1CSR0_DCE@l
+	beq	2b
+
+#define toreset(x) (x - __secondary_start_page + 0xfffff000)
+
+	/* get our PIR to figure out our table entry */
+	lis	r3,toreset(__spin_table)@h
+	ori	r3,r3,toreset(__spin_table)@l
+
+	/* r10 has the base address for the entry */
+	mfspr	r0,SPRN_PIR
+#ifdef CONFIG_E500MC
+	rlwinm	r4,r0,27,27,31
+#else
+	mr	r4,r0
+#endif
+	slwi	r8,r4,5
+	add	r10,r3,r8
+
+#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
+	/* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
+	slwi	r8,r4,1
+	addi	r8,r8,32
+	mtspr	L1CSR2,r8
+#endif
+
+#ifdef CONFIG_BACKSIDE_L2_CACHE
+	/* Enable/invalidate the L2 cache */
+	msync
+	lis	r2,(L2CSR0_L2FI|L2CSR0_L2LFC)@h
+	ori	r2,r2,(L2CSR0_L2FI|L2CSR0_L2LFC)@l
+	mtspr	SPRN_L2CSR0,r2
+1:
+	mfspr	r3,SPRN_L2CSR0
+	and.	r1,r3,r2
+	bne	1b
+
+#ifdef CONFIG_SYS_CACHE_STASHING
+	/* set stash id to (coreID) * 2 + 32 + L2 (1) */
+	addi	r3,r8,1
+	mtspr	SPRN_L2CSR1,r3
+#endif
+
+	lis	r3,CONFIG_SYS_INIT_L2CSR0@h
+	ori	r3,r3,CONFIG_SYS_INIT_L2CSR0@l
+	mtspr	SPRN_L2CSR0,r3
+	isync
+2:
+	mfspr	r3,SPRN_L2CSR0
+	andis.	r1,r3,L2CSR0_L2E@h
+	beq	2b
+#endif
+
+#define EPAPR_MAGIC		(0x45504150)
+#define ENTRY_ADDR_UPPER	0
+#define ENTRY_ADDR_LOWER	4
+#define ENTRY_R3_UPPER		8
+#define ENTRY_R3_LOWER		12
+#define ENTRY_RESV		16
+#define ENTRY_PIR		20
+#define ENTRY_R6_UPPER		24
+#define ENTRY_R6_LOWER		28
+#define ENTRY_SIZE		32
+
+	/* setup the entry */
+	li	r3,0
+	li	r8,1
+	stw	r0,ENTRY_PIR(r10)
+	stw	r3,ENTRY_ADDR_UPPER(r10)
+	stw	r8,ENTRY_ADDR_LOWER(r10)
+	stw	r3,ENTRY_R3_UPPER(r10)
+	stw	r4,ENTRY_R3_LOWER(r10)
+	stw	r3,ENTRY_R6_UPPER(r10)
+	stw	r3,ENTRY_R6_LOWER(r10)
+
+	/* load r13 with the address of the 'bootpg' in SDRAM */
+	lis	r13,toreset(__bootpg_addr)@h
+	ori	r13,r13,toreset(__bootpg_addr)@l
+	lwz	r13,0(r13)
+
+	/* setup mapping for AS = 1, and jump there */
+	lis	r11,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h
+	mtspr	SPRN_MAS0,r11
+	lis	r11,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
+	mtspr	SPRN_MAS1,r11
+	oris	r11,r13,(MAS2_I|MAS2_G)@h
+	ori	r11,r13,(MAS2_I|MAS2_G)@l
+	mtspr	SPRN_MAS2,r11
+	oris	r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@h
+	ori	r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@l
+	mtspr	SPRN_MAS3,r11
+	tlbwe
+
+	bl	1f
+1:	mflr	r11
+	/*
+	 * OR in 0xfff to create a mask of the bootpg SDRAM address.  We use
+	 * this mask to fixup the cpu spin table and the address that we want
+	 * to jump to, eg change them from 0xfffffxxx to 0x7ffffxxx if the
+	 * bootpg is at 0x7ffff000 in SDRAM.
+	 */
+	ori	r13,r13,0xfff
+	and	r11, r11, r13
+	and	r10, r10, r13
+
+	addi	r11,r11,(2f-1b)
+	mfmsr	r13
+	ori	r12,r13,MSR_IS|MSR_DS@l
+
+	mtspr	SPRN_SRR0,r11
+	mtspr	SPRN_SRR1,r12
+	rfi
+
+	/* spin waiting for addr */
+2:
+	lwz	r4,ENTRY_ADDR_LOWER(r10)
+	andi.	r11,r4,1
+	bne	2b
+	isync
+
+	/* setup IVORs to match fixed offsets */
+#include "fixed_ivor.S"
+
+	/* get the upper bits of the addr */
+	lwz	r11,ENTRY_ADDR_UPPER(r10)
+
+	/* setup branch addr */
+	mtspr	SPRN_SRR0,r4
+
+	/* mark the entry as released */
+	li	r8,3
+	stw	r8,ENTRY_ADDR_LOWER(r10)
+
+	/* mask by ~64M to setup our tlb we will jump to */
+	rlwinm	r12,r4,0,0,5
+
+	/* setup r3, r4, r5, r6, r7, r8, r9 */
+	lwz	r3,ENTRY_R3_LOWER(r10)
+	li	r4,0
+	li	r5,0
+	lwz	r6,ENTRY_R6_LOWER(r10)
+	lis	r7,(64*1024*1024)@h
+	li	r8,0
+	li	r9,0
+
+	/* load up the pir */
+	lwz	r0,ENTRY_PIR(r10)
+	mtspr	SPRN_PIR,r0
+	mfspr	r0,SPRN_PIR
+	stw	r0,ENTRY_PIR(r10)
+
+	mtspr	IVPR,r12
+/*
+ * Coming here, we know the cpu has one TLB mapping in TLB1[0]
+ * which maps 0xfffff000-0xffffffff one-to-one.  We set up a
+ * second mapping that maps addr 1:1 for 64M, and then we jump to
+ * addr
+ */
+	lis	r10,(MAS0_TLBSEL(1)|MAS0_ESEL(0))@h
+	mtspr	SPRN_MAS0,r10
+	lis	r10,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r10,r10,(MAS1_TSIZE(BOOKE_PAGESZ_64M))@l
+	mtspr	SPRN_MAS1,r10
+	/* WIMGE = 0b00000 for now */
+	mtspr	SPRN_MAS2,r12
+	ori	r12,r12,(MAS3_SX|MAS3_SW|MAS3_SR)
+	mtspr	SPRN_MAS3,r12
+#ifdef CONFIG_ENABLE_36BIT_PHYS
+	mtspr	SPRN_MAS7,r11
+#endif
+	tlbwe
+
+/* Now we have another mapping for this page, so we jump to that
+ * mapping
+ */
+	mtspr	SPRN_SRR1,r13
+	rfi
+
+	/*
+	 * Allocate some space for the SDRAM address of the bootpg.
+	 * This variable has to be in the boot page so that it can
+	 * be accessed by secondary cores when they come out of reset.
+	 */
+	.globl __bootpg_addr
+__bootpg_addr:
+	.long	0
+
+	.align L1_CACHE_SHIFT
+	.globl __spin_table
+__spin_table:
+	.space CONFIG_MAX_CPUS*ENTRY_SIZE
+
+	/* Fill in the empty space.  The actual reset vector is
+	 * the last word of the page */
+__secondary_start_code_end:
+	.space 4092 - (__secondary_start_code_end - __secondary_start_page)
+__secondary_reset_vector:
+	b	__secondary_start_page