Tegra20: Move some code files to common directories for upcoming Tegra30 patches.

Move files that are going to be common between T20 and T30 into 'tegra-common'
subdirs in AVP (arm720t), CPU (armv7), and shared (arch/arm/cpu/.) areas. Any
files that are left behind in '/tegra20' will be copied to '/tegra30' subdirs
and modified for that SoC. The 'common' files should need only minor changes.

Include files (arch/arm/include/asm/arch-tegra/tegra20) will be done in a
follow-on patch.

Builds fine w/MAKEALL -s tegra20. Checkpatch.pl is clean.

Signed-off-by: Tom Warren <twarren@nvidia.com>

1 files changed, 146 insertions, 0 deletions

diff --git a/arch/arm/cpu/tegra-common/board.c b/arch/arm/cpu/tegra-common/board.c
new file mode 100644
index 000000000..8a8d3384a
--- /dev/null
+++ b/arch/arm/cpu/tegra-common/board.c
@@ -0,0 +1,146 @@
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pmc.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/tegra20.h>
+#include <asm/arch/warmboot.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum {
+	/* UARTs which we can enable */
+	UARTA	= 1 << 0,
+	UARTB	= 1 << 1,
+	UARTD	= 1 << 3,
+	UART_COUNT = 4,
+};
+
+/*
+ * Boot ROM initializes the odmdata in APBDEV_PMC_SCRATCH20_0,
+ * so we are using this value to identify memory size.
+ */
+
+unsigned int query_sdram_size(void)
+{
+	struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
+	u32 reg;
+
+	reg = readl(&pmc->pmc_scratch20);
+	debug("pmc->pmc_scratch20 (ODMData) = 0x%08x\n", reg);
+
+	/* bits 31:28 in OdmData are used for RAM size  */
+	switch ((reg) >> 28) {
+	case 1:
+		return 0x10000000;	/* 256 MB */
+	case 2:
+	default:
+		return 0x20000000;	/* 512 MB */
+	case 3:
+		return 0x40000000;	/* 1GB */
+	}
+}
+
+int dram_init(void)
+{
+	/* We do not initialise DRAM here. We just query the size */
+	gd->ram_size = query_sdram_size();
+	return 0;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	printf("Board: %s\n", sysinfo.board_string);
+	return 0;
+}
+#endif	/* CONFIG_DISPLAY_BOARDINFO */
+
+static int uart_configs[] = {
+#if defined(CONFIG_TEGRA_UARTA_UAA_UAB)
+	FUNCMUX_UART1_UAA_UAB,
+#elif defined(CONFIG_TEGRA_UARTA_GPU)
+	FUNCMUX_UART1_GPU,
+#elif defined(CONFIG_TEGRA_UARTA_SDIO1)
+	FUNCMUX_UART1_SDIO1,
+#else
+	FUNCMUX_UART1_IRRX_IRTX,
+#endif
+	FUNCMUX_UART2_IRDA,
+	-1,
+	FUNCMUX_UART4_GMC,
+	-1,
+};
+
+/**
+ * Set up the specified uarts
+ *
+ * @param uarts_ids	Mask containing UARTs to init (UARTx)
+ */
+static void setup_uarts(int uart_ids)
+{
+	static enum periph_id id_for_uart[] = {
+		PERIPH_ID_UART1,
+		PERIPH_ID_UART2,
+		PERIPH_ID_UART3,
+		PERIPH_ID_UART4,
+	};
+	size_t i;
+
+	for (i = 0; i < UART_COUNT; i++) {
+		if (uart_ids & (1 << i)) {
+			enum periph_id id = id_for_uart[i];
+
+			funcmux_select(id, uart_configs[i]);
+			clock_ll_start_uart(id);
+		}
+	}
+}
+
+void board_init_uart_f(void)
+{
+	int uart_ids = 0;	/* bit mask of which UART ids to enable */
+
+#ifdef CONFIG_TEGRA_ENABLE_UARTA
+	uart_ids |= UARTA;
+#endif
+#ifdef CONFIG_TEGRA_ENABLE_UARTB
+	uart_ids |= UARTB;
+#endif
+#ifdef CONFIG_TEGRA_ENABLE_UARTD
+	uart_ids |= UARTD;
+#endif
+	setup_uarts(uart_ids);
+}
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif