Removed USB and Ethernet support

2 files changed, 0 insertions, 103 deletions

diff --git a/board/olio/h1/h1.c b/board/olio/h1/h1.c
index e7ec2d975..e04aa817a 100644
--- a/board/olio/h1/h1.c
+++ b/board/olio/h1/h1.c
@@ -22,19 +22,10 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/gpio.h>
 #include <asm/mach-types.h>
-#include <asm/omap_musb.h>
 #include <asm/errno.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb/musb.h>
 #include "h1.h"
 #include <command.h>
 
-#ifdef CONFIG_USB_EHCI
-#include <usb.h>
-#include <asm/ehci-omap.h>
-#endif
-
 #define TWL4030_I2C_BUS			0
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -118,33 +109,6 @@ static void beagle_dvi_pup(void)
 }
 #endif
 
-#ifdef CONFIG_USB_MUSB_OMAP2PLUS
-static struct musb_hdrc_config musb_config = {
-	.multipoint     = 1,
-	.dyn_fifo       = 1,
-	.num_eps        = 16,
-	.ram_bits       = 12,
-};
-
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type	= MUSB_INTERFACE_ULPI,
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_MUSB_HOST)
-	.mode           = MUSB_HOST,
-#elif defined(CONFIG_MUSB_GADGET)
-	.mode		= MUSB_PERIPHERAL,
-#else
-#error "Please define either CONFIG_MUSB_HOST or CONFIG_MUSB_GADGET"
-#endif
-	.config         = &musb_config,
-	.power          = 100,
-	.platform_ops	= &omap2430_ops,
-	.board_data	= &musb_board_data,
-};
-#endif
-
 /*
  * Routine: misc_init_r
  * Description: Configure board specific parts
@@ -189,10 +153,6 @@ int misc_init_r(void)
 	omap3_dss_enable();
 #endif
 
-#ifdef CONFIG_USB_MUSB_OMAP2PLUS
-	musb_register(&musb_plat, &musb_board_data, (void *)MUSB_BASE);
-#endif
-
 	return 0;
 }
 
@@ -206,36 +166,3 @@ void set_muxconf_regs(void)
 {
 	MUX_BEAGLE();
 }
-
-#if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD)
-/* Call usb_stop() before starting the kernel */
-void show_boot_progress(int val)
-{
-	if (val == BOOTSTAGE_ID_RUN_OS)
-		usb_stop();
-}
-
-static struct omap_usbhs_board_data usbhs_bdata = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED
-};
-
-int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
-	return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
-}
-
-int ehci_hcd_stop(int index)
-{
-	return omap_ehci_hcd_stop();
-}
-
-#endif /* CONFIG_USB_EHCI */
-
-#if defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)
-int board_eth_init(bd_t *bis)
-{
-	return usb_eth_initialize(bis);
-}
-#endif
diff --git a/include/configs/omap3_h1.h b/include/configs/omap3_h1.h
index 68fdbbd09..3334c5219 100644
--- a/include/configs/omap3_h1.h
+++ b/include/configs/omap3_h1.h
@@ -86,30 +86,6 @@
 /* Probe all devices */
 #define CONFIG_SYS_I2C_NOPROBES		{{0x0, 0x0}}
 
-/* USB */
-#define CONFIG_MUSB_GADGET
-#define CONFIG_USB_MUSB_OMAP2PLUS
-#define CONFIG_MUSB_PIO_ONLY
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_TWL4030_USB		1
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETHER_RNDIS
-
-/* USB EHCI */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-
-#define CONFIG_USB_EHCI_OMAP
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	147
-
-#define CONFIG_USB_ULPI
-#define CONFIG_USB_ULPI_VIEWPORT_OMAP
-
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_USB_ETHER_ASIX
-
 
 /* commands to include */
 #include <config_cmd_default.h>
@@ -118,7 +94,6 @@
 
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EXT2		/* EXT2 Support			*/
-#define CONFIG_CMD_FAT		/* FAT support			*/
 #define CONFIG_CMD_FS_GENERIC	/* Generic FS support */
 #define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
@@ -128,12 +103,7 @@
 					"4m(kernel),-(fs)"
 
 #define CONFIG_CMD_I2C		/* I2C serial bus support	*/
-#define CONFIG_USB_STORAGE	/* USB storage support		*/
 #define CONFIG_CMD_NAND		/* NAND support			*/
-#define CONFIG_CMD_NET      /* bootp, tftpboot, rarpboot    */
-#define CONFIG_CMD_NFS      /* NFS support          */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_SETEXPR	/* Evaluate expressions		*/
 #define CONFIG_CMD_GPIO     /* Enable gpio command */