cleanup: Fix typos and misspellings in various files.

Recieve/Receive
recieve/receive
Interupt/Interrupt
interupt/interrupt
Addres/Address
addres/address

Signed-off-by: Mike Williams <mike@mikebwilliams.com>

48 files changed, 57 insertions, 57 deletions

diff --git a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c b/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c
index b4dc4a6e2..bd6a5b120 100644
--- a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c
+++ b/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c
@@ -148,7 +148,7 @@ unsigned char mmc_read_sector (unsigned long addr,unsigned char *Buffer)
 	/* Command 16 to read aBlocks from the MMC/SD - caed */
 	unsigned char CMD[] = {0x51,0x00,0x00,0x00,0x00,0xFF};
 
-	/* The addres on the MMC/SD-card is in bytes,
+	/* The address on the MMC/SD-card is in bytes,
 	addr is transformed from blocks to bytes and the result is
 	placed into the command */
 
@@ -173,7 +173,7 @@ unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer)
 	/* Command 24 to write a block to the MMC/SD - card */
 	unsigned char CMD[] = {0x58, 0x00, 0x00, 0x00, 0x00, 0xFF};
 
-	/* The addres on the MMC/SD-card is in bytes,
+	/* The address on the MMC/SD-card is in bytes,
 	addr is transformed from blocks to bytes and the result is
 	placed into the command */
 
diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S
index 091b7d891..ecb92ef21 100644
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -274,7 +274,7 @@ _dynsym_start_ofs:
 
 #if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
 
-/* Interupt-Controller base addresses */
+/* Interrupt-Controller base addresses */
 INTMR1:		.word	0x80000280 @ 32 bit size
 INTMR2:		.word	0x80001280 @ 16 bit size
 INTMR3:		.word	0x80002280 @  8 bit size
diff --git a/arch/arm/cpu/arm920t/at91/timer.c b/arch/arm/cpu/arm920t/at91/timer.c
index c321e2864..91607b525 100644
--- a/arch/arm/cpu/arm920t/at91/timer.c
+++ b/arch/arm/cpu/arm920t/at91/timer.c
@@ -59,7 +59,7 @@ int timer_init(void)
 	when the value in TC_RC is reached */
 	writel(AT91_TC_CMR_TCCLKS_CLOCK1 | AT91_TC_CMR_CPCTRG, &tc->tc[0].cmr);
 
-	writel(0xFFFFFFFF, &tc->tc[0].idr); /* disable interupts */
+	writel(0xFFFFFFFF, &tc->tc[0].idr); /* disable interrupts */
 	writel(TIMER_LOAD_VAL, &tc->tc[0].rc);
 
 	writel(AT91_TC_CCR_SWTRG | AT91_TC_CCR_CLKEN, &tc->tc[0].ccr);
diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S
index 2a536674b..0090f894d 100644
--- a/arch/arm/cpu/arm920t/start.S
+++ b/arch/arm/cpu/arm920t/start.S
@@ -142,11 +142,11 @@ copyex:
 
 # if defined(CONFIG_S3C2400)
 #  define pWTCON	0x15300000
-#  define INTMSK	0x14400008	/* Interupt-Controller base addresses */
+#  define INTMSK	0x14400008	/* Interrupt-Controller base addresses */
 #  define CLKDIVN	0x14800014	/* clock divisor register */
 #else
 #  define pWTCON	0x53000000
-#  define INTMSK	0x4A000008	/* Interupt-Controller base addresses */
+#  define INTMSK	0x4A000008	/* Interrupt-Controller base addresses */
 #  define INTSUBMSK	0x4A00001C
 #  define CLKDIVN	0x4C000014	/* clock divisor register */
 # endif
diff --git a/arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c b/arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c
index 09f69ce32..642e67ae8 100644
--- a/arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c
+++ b/arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c
@@ -386,7 +386,7 @@ ixQMgrNotificationEnable (IxQMgrQId qId,
 				     &dispatchQInfo[qId].statusMask);
 
 
-    /* Set the interupt source is this queue is in the range 0-31 */
+    /* Set the interrupt source is this queue is in the range 0-31 */
     if (qId < IX_QMGR_MIN_QUEUPP_QID)
     {
 	ixQMgrAqmIfIntSrcSelWrite (qId, srcSel);
diff --git a/arch/arm/cpu/ixp/npe/include/IxEthAcc_p.h b/arch/arm/cpu/ixp/npe/include/IxEthAcc_p.h
index 0ee412355..4e0de8235 100644
--- a/arch/arm/cpu/ixp/npe/include/IxEthAcc_p.h
+++ b/arch/arm/cpu/ixp/npe/include/IxEthAcc_p.h
@@ -279,7 +279,7 @@ typedef struct
     BOOL               portInitialized;
     UINT32 npeId; /**< NpeId for this port */
     IxEthAccTxDataInfo ixEthAccTxData; /**< Transmit data control structures */
-    IxEthAccRxDataInfo ixEthAccRxData; /**< Recieve data control structures */
+    IxEthAccRxDataInfo ixEthAccRxData; /**< Receive data control structures */
 } IxEthAccPortDataInfo; 
 
 extern IxEthAccPortDataInfo  ixEthAccPortData[];
diff --git a/arch/arm/cpu/ixp/npe/include/IxNpeA.h b/arch/arm/cpu/ixp/npe/include/IxNpeA.h
index 7427cc41c..90669c27e 100644
--- a/arch/arm/cpu/ixp/npe/include/IxNpeA.h
+++ b/arch/arm/cpu/ixp/npe/include/IxNpeA.h
@@ -717,7 +717,7 @@ typedef struct
  */
 typedef struct
 {
-    UINT32  rxBitField;			/**< Recieved bit field */
+    UINT32  rxBitField;			/**< Received bit field */
     UINT32  atmCellHeader;		/**< ATM Cell Header */
     UINT32  rsvdWord0;                  /**< Reserved field */
     UINT16  currMbufLen;		/**< Mbuf Length */
diff --git a/arch/arm/cpu/ixp/npe/include/IxQMgr.h b/arch/arm/cpu/ixp/npe/include/IxQMgr.h
index 165ed96e5..03d7e0709 100644
--- a/arch/arm/cpu/ixp/npe/include/IxQMgr.h
+++ b/arch/arm/cpu/ixp/npe/include/IxQMgr.h
@@ -570,7 +570,7 @@ typedef enum
  * @brief Queue interrupt source select.
  *
  * This enum defines the different source conditions on a queue that result in
- * an interupt being fired by the AQM. Interrupt source is configurable for
+ * an interrupt being fired by the AQM. Interrupt source is configurable for
  * queues 0-31 only. The interrupt source for queues 32-63 is hardwired to the
  * NE(Nearly Empty) status flag.
  *
diff --git a/arch/arm/cpu/ixp/npe/include/IxQueueAssignments.h b/arch/arm/cpu/ixp/npe/include/IxQueueAssignments.h
index f7194e72e..b65d621e3 100644
--- a/arch/arm/cpu/ixp/npe/include/IxQueueAssignments.h
+++ b/arch/arm/cpu/ixp/npe/include/IxQueueAssignments.h
@@ -404,7 +404,7 @@
 *
 * @def IX_ETH_ACC_RX_FRAME_ETH_Q 
 *
-* @brief  Eth0/Eth1 NPE Frame Recieve Q.
+* @brief  Eth0/Eth1 NPE Frame Receive Q.
 *
 * @note THIS IS NOT USED - the Rx queues are read from EthDB QoS configuration
 * 
diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S
index 61bce5f18..14e985457 100644
--- a/arch/arm/cpu/lh7a40x/start.S
+++ b/arch/arm/cpu/lh7a40x/start.S
@@ -124,7 +124,7 @@ reset:
 	msr	cpsr,r0
 
 #define pWDTCTL		0x80001400  /* Watchdog Timer control register */
-#define pINTENC		0x8000050C  /* Interupt-Controller enable clear register */
+#define pINTENC		0x8000050C  /* Interrupt-Controller enable clear register */
 #define pCLKSET		0x80000420  /* clock divisor register */
 
 	/* disable watchdog, set watchdog control register to
diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S
index c3acf7aae..7223c471b 100644
--- a/arch/arm/cpu/sa1100/start.S
+++ b/arch/arm/cpu/sa1100/start.S
@@ -263,7 +263,7 @@ _dynsym_start_ofs:
  */
 
 
-/* Interupt-Controller base address */
+/* Interrupt-Controller base address */
 IC_BASE:	.word	0x90050000
 #define ICMR	0x04
 
diff --git a/arch/m68k/include/asm/fec.h b/arch/m68k/include/asm/fec.h
index cecec59ff..e8cea45ed 100644
--- a/arch/m68k/include/asm/fec.h
+++ b/arch/m68k/include/asm/fec.h
@@ -39,7 +39,7 @@ typedef struct cpm_buf_desc {
 	uint cbd_bufaddr;	/* Buffer address in host memory */
 } cbd_t;
 
-#define BD_SC_EMPTY		((ushort)0x8000)	/* Recieve is empty */
+#define BD_SC_EMPTY		((ushort)0x8000)	/* Receive is empty */
 #define BD_SC_READY		((ushort)0x8000)	/* Transmit is ready */
 #define BD_SC_WRAP		((ushort)0x2000)	/* Last buffer descriptor */
 #define BD_SC_INTRPT		((ushort)0x1000)	/* Interrupt on change */
diff --git a/arch/powerpc/include/asm/cpm_8260.h b/arch/powerpc/include/asm/cpm_8260.h
index 8302404ab..6a4a51a9a 100644
--- a/arch/powerpc/include/asm/cpm_8260.h
+++ b/arch/powerpc/include/asm/cpm_8260.h
@@ -117,7 +117,7 @@ typedef struct cpm_buf_desc {
 	uint	cbd_bufaddr;	/* Buffer address in host memory */
 } cbd_t;
 
-#define BD_SC_EMPTY	((ushort)0x8000)	/* Recieve is empty */
+#define BD_SC_EMPTY	((ushort)0x8000)	/* Receive is empty */
 #define BD_SC_READY	((ushort)0x8000)	/* Transmit is ready */
 #define BD_SC_WRAP	((ushort)0x2000)	/* Last buffer descriptor */
 #define BD_SC_INTRPT	((ushort)0x1000)	/* Interrupt on change */
diff --git a/arch/powerpc/include/asm/cpm_85xx.h b/arch/powerpc/include/asm/cpm_85xx.h
index a74a3a115..1681ecd50 100644
--- a/arch/powerpc/include/asm/cpm_85xx.h
+++ b/arch/powerpc/include/asm/cpm_85xx.h
@@ -110,7 +110,7 @@ typedef struct cpm_buf_desc {
 	uint	cbd_bufaddr;	/* Buffer address in host memory */
 } cbd_t;
 
-#define BD_SC_EMPTY	((ushort)0x8000)	/* Recieve is empty */
+#define BD_SC_EMPTY	((ushort)0x8000)	/* Receive is empty */
 #define BD_SC_READY	((ushort)0x8000)	/* Transmit is ready */
 #define BD_SC_WRAP	((ushort)0x2000)	/* Last buffer descriptor */
 #define BD_SC_INTRPT	((ushort)0x1000)	/* Interrupt on change */
diff --git a/arch/powerpc/include/asm/ppc440ep_gr.h b/arch/powerpc/include/asm/ppc440ep_gr.h
index dfd1532b0..e7909638e 100644
--- a/arch/powerpc/include/asm/ppc440ep_gr.h
+++ b/arch/powerpc/include/asm/ppc440ep_gr.h
@@ -182,7 +182,7 @@
 #define PLLD_LFBDV_MASK		0x0000003f  /* PLL Local Feedback Divisor */
 
 #define OPBDDV_MASK		0x03000000  /* OPB Clock Divisor Register */
-#define PERDV_MASK		0x07000000  /* Periferal Clock Divisor */
+#define PERDV_MASK		0x07000000  /* Peripheral Clock Divisor */
 #define PRADV_MASK		0x07000000  /* Primary Divisor A */
 #define PRBDV_MASK		0x07000000  /* Primary Divisor B */
 #define SPCID_MASK		0x03000000  /* Sync PCI Divisor  */
@@ -192,7 +192,7 @@
 #define PLLSYS1_PERCLK_DIV_MASK 0x03000000	/* Peripheral Clk Divisor */
 #define PLLSYS1_MAL_DIV_MASK	0x00c00000	/* MAL Clk Divisor */
 #define PLLSYS1_RW_MASK		0x00300000	/* ROM width */
-#define PLLSYS1_EAR_MASK	0x00080000	/* ERAP Addres reset vector */
+#define PLLSYS1_EAR_MASK	0x00080000	/* ERAP Address reset vector */
 #define PLLSYS1_PAE_MASK	0x00040000	/* PCI arbitor enable */
 #define PLLSYS1_PCHE_MASK	0x00020000	/* PCI host config enable */
 #define PLLSYS1_PISE_MASK	0x00010000	/* PCI init seq. enable */
diff --git a/arch/powerpc/include/asm/ppc440epx_grx.h b/arch/powerpc/include/asm/ppc440epx_grx.h
index 6c214726b..c841f0fa0 100644
--- a/arch/powerpc/include/asm/ppc440epx_grx.h
+++ b/arch/powerpc/include/asm/ppc440epx_grx.h
@@ -398,7 +398,7 @@
 #define PLLD_LFBDV_MASK		0x0000003f  /* PLL Local Feedback Divisor */
 
 #define OPBDDV_MASK		0x03000000  /* OPB Clock Divisor Register */
-#define PERDV_MASK		0x07000000  /* Periferal Clock Divisor */
+#define PERDV_MASK		0x07000000  /* Peripheral Clock Divisor */
 #define PRADV_MASK		0x07000000  /* Primary Divisor A */
 #define PRBDV_MASK		0x07000000  /* Primary Divisor B */
 #define SPCID_MASK		0x03000000  /* Sync PCI Divisor  */
@@ -408,7 +408,7 @@
 #define PLLSYS1_PERCLK_DIV_MASK 0x03000000	/* Peripheral Clk Divisor */
 #define PLLSYS1_MAL_DIV_MASK	0x00c00000	/* MAL Clk Divisor */
 #define PLLSYS1_RW_MASK		0x00300000	/* ROM width */
-#define PLLSYS1_EAR_MASK	0x00080000	/* ERAP Addres reset vector */
+#define PLLSYS1_EAR_MASK	0x00080000	/* ERAP Address reset vector */
 #define PLLSYS1_PAE_MASK	0x00040000	/* PCI arbitor enable */
 #define PLLSYS1_PCHE_MASK	0x00020000	/* PCI host config enable */
 #define PLLSYS1_PISE_MASK	0x00010000	/* PCI init seq. enable */
diff --git a/arch/powerpc/include/asm/ppc440gx.h b/arch/powerpc/include/asm/ppc440gx.h
index 6f8581ba7..992452569 100644
--- a/arch/powerpc/include/asm/ppc440gx.h
+++ b/arch/powerpc/include/asm/ppc440gx.h
@@ -71,7 +71,7 @@
 #define PLLD_LFBDV_MASK		0x0000003f  /* PLL Local Feedback Divisor */
 
 #define OPBDDV_MASK		0x03000000  /* OPB Clock Divisor Register */
-#define PERDV_MASK		0x07000000  /* Periferal Clock Divisor */
+#define PERDV_MASK		0x07000000  /* Peripheral Clock Divisor */
 #define PRADV_MASK		0x07000000  /* Primary Divisor A */
 #define PRBDV_MASK		0x07000000  /* Primary Divisor B */
 #define SPCID_MASK		0x03000000  /* Sync PCI Divisor  */
@@ -81,7 +81,7 @@
 #define PLLSYS1_PERCLK_DIV_MASK 0x03000000	/* Peripheral Clk Divisor */
 #define PLLSYS1_MAL_DIV_MASK	0x00c00000	/* MAL Clk Divisor */
 #define PLLSYS1_RW_MASK		0x00300000	/* ROM width */
-#define PLLSYS1_EAR_MASK	0x00080000	/* ERAP Addres reset vector */
+#define PLLSYS1_EAR_MASK	0x00080000	/* ERAP Address reset vector */
 #define PLLSYS1_PAE_MASK	0x00040000	/* PCI arbitor enable */
 #define PLLSYS1_PCHE_MASK	0x00020000	/* PCI host config enable */
 #define PLLSYS1_PISE_MASK	0x00010000	/* PCI init seq. enable */
diff --git a/arch/powerpc/include/asm/ppc440sp.h b/arch/powerpc/include/asm/ppc440sp.h
index 4387495cd..cc2ff6812 100644
--- a/arch/powerpc/include/asm/ppc440sp.h
+++ b/arch/powerpc/include/asm/ppc440sp.h
@@ -67,7 +67,7 @@
 #define PLLD_LFBDV_MASK		0x0000003f  /* PLL Local Feedback Divisor */
 
 #define OPBDDV_MASK		0x03000000  /* OPB Clock Divisor Register */
-#define PERDV_MASK		0x07000000  /* Periferal Clock Divisor */
+#define PERDV_MASK		0x07000000  /* Peripheral Clock Divisor */
 #define PRADV_MASK		0x07000000  /* Primary Divisor A */
 #define PRBDV_MASK		0x07000000  /* Primary Divisor B */
 #define SPCID_MASK		0x03000000  /* Sync PCI Divisor  */
@@ -77,7 +77,7 @@
 #define PLLSYS1_PERCLK_DIV_MASK 0x03000000	/* Peripheral Clk Divisor */
 #define PLLSYS1_MAL_DIV_MASK	0x00c00000	/* MAL Clk Divisor */
 #define PLLSYS1_RW_MASK		0x00300000	/* ROM width */
-#define PLLSYS1_EAR_MASK	0x00080000	/* ERAP Addres reset vector */
+#define PLLSYS1_EAR_MASK	0x00080000	/* ERAP Address reset vector */
 #define PLLSYS1_PAE_MASK	0x00040000	/* PCI arbitor enable */
 #define PLLSYS1_PCHE_MASK	0x00020000	/* PCI host config enable */
 #define PLLSYS1_PISE_MASK	0x00010000	/* PCI init seq. enable */
diff --git a/arch/powerpc/include/asm/ppc440spe.h b/arch/powerpc/include/asm/ppc440spe.h
index bad9a4073..d59d7d28a 100644
--- a/arch/powerpc/include/asm/ppc440spe.h
+++ b/arch/powerpc/include/asm/ppc440spe.h
@@ -83,7 +83,7 @@
 #define PLLD_LFBDV_MASK		0x0000003f  /* PLL Local Feedback Divisor */
 
 #define OPBDDV_MASK		0x03000000  /* OPB Clock Divisor Register */
-#define PERDV_MASK		0x07000000  /* Periferal Clock Divisor */
+#define PERDV_MASK		0x07000000  /* Peripheral Clock Divisor */
 #define PRADV_MASK		0x07000000  /* Primary Divisor A */
 #define PRBDV_MASK		0x07000000  /* Primary Divisor B */
 #define SPCID_MASK		0x03000000  /* Sync PCI Divisor  */
@@ -93,7 +93,7 @@
 #define PLLSYS1_PERCLK_DIV_MASK 0x03000000	/* Peripheral Clk Divisor */
 #define PLLSYS1_MAL_DIV_MASK	0x00c00000	/* MAL Clk Divisor */
 #define PLLSYS1_RW_MASK		0x00300000	/* ROM width */
-#define PLLSYS1_EAR_MASK	0x00080000	/* ERAP Addres reset vector */
+#define PLLSYS1_EAR_MASK	0x00080000	/* ERAP Address reset vector */
 #define PLLSYS1_PAE_MASK	0x00040000	/* PCI arbitor enable */
 #define PLLSYS1_PCHE_MASK	0x00020000	/* PCI host config enable */
 #define PLLSYS1_PISE_MASK	0x00010000	/* PCI init seq. enable */
diff --git a/arch/sparc/cpu/leon3/usb_uhci.c b/arch/sparc/cpu/leon3/usb_uhci.c
index 8f99e1db1..b1269d260 100644
--- a/arch/sparc/cpu/leon3/usb_uhci.c
+++ b/arch/sparc/cpu/leon3/usb_uhci.c
@@ -70,7 +70,7 @@
  *
  * Interrupt Transfers.
  * --------------------
- * For Interupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They
+ * For Interrupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They
  * will be inserted after the appropriate (depending the interval setting) skeleton TD.
  * If an interrupt has been detected the dev->irqhandler is called. The status and number
  * of transfered bytes is stored in dev->irq_status resp. dev->irq_act_len. If the
diff --git a/arch/x86/cpu/start.S b/arch/x86/cpu/start.S
index 7ccc076fe..6c84c43f0 100644
--- a/arch/x86/cpu/start.S
+++ b/arch/x86/cpu/start.S
@@ -66,7 +66,7 @@ _start:
 	movw	%ax, %es
 	movw	%ax, %ss
 
-	/* Clear the interupt vectors */
+	/* Clear the interrupt vectors */
 	lidt	blank_idt_ptr
 
 	/* Early platform init (setup gpio, etc ) */
diff --git a/arch/x86/include/asm/interrupt.h b/arch/x86/include/asm/interrupt.h
index be52fe40d..f33f8ed44 100644
--- a/arch/x86/include/asm/interrupt.h
+++ b/arch/x86/include/asm/interrupt.h
@@ -32,7 +32,7 @@
 /* arch/x86/cpu/interrupts.c */
 void set_vector(u8 intnum, void *routine);
 
-/* arch/x86/lib/interupts.c */
+/* arch/x86/lib/interrupts.c */
 void disable_irq(int irq);
 void enable_irq(int irq);
 
diff --git a/board/Marvell/common/bootseq.txt b/board/Marvell/common/bootseq.txt
index e4fefb31d..6cae9ea07 100644
--- a/board/Marvell/common/bootseq.txt
+++ b/board/Marvell/common/bootseq.txt
@@ -62,7 +62,7 @@ in_flash:
 	    remap gt regs?
 	    map PCI mem/io
 	    map device space
-	    clear out interupts
+	    clear out interrupts
 	init_timebase
 	env_init
 	serial_init
diff --git a/board/Marvell/common/i2c.c b/board/Marvell/common/i2c.c
index 8d87b2dd9..d53495c76 100644
--- a/board/Marvell/common/i2c.c
+++ b/board/Marvell/common/i2c.c
@@ -420,7 +420,7 @@ i2c_read (uchar dev_addr, unsigned int offset, int alen, uchar * data,
 	status = i2c_get_data (data, len);
 	if (status) {
 #ifdef DEBUG_I2C
-		printf ("Data not recieved: 0x%02x\n", status);
+		printf ("Data not received: 0x%02x\n", status);
 #endif
 		return status;
 	}
diff --git a/board/Marvell/common/ns16550.h b/board/Marvell/common/ns16550.h
index 0a2951bce..930638135 100644
--- a/board/Marvell/common/ns16550.h
+++ b/board/Marvell/common/ns16550.h
@@ -51,7 +51,7 @@ struct NS16550
 #define dlm ier
 
 #define FCR_FIFO_EN     0x01    /*fifo enable*/
-#define FCR_RXSR        0x02    /*reciever soft reset*/
+#define FCR_RXSR        0x02    /*receiver soft reset*/
 #define FCR_TXSR        0x04    /*transmitter soft reset*/
 
 
diff --git a/board/Marvell/include/mv_gen_reg.h b/board/Marvell/include/mv_gen_reg.h
index 5e4f07606..03fcd8865 100644
--- a/board/Marvell/include/mv_gen_reg.h
+++ b/board/Marvell/include/mv_gen_reg.h
@@ -2237,7 +2237,7 @@
 #define CHANNEL2_REGISTER10				    0x9070
 #define CHANNEL2_REGISTER11				    0x9074
 
-/* MPSCs Interupts  */
+/* MPSCs Interrupts  */
 
 #define MPSC0_CAUSE						0xb824
 #define MPSC0_MASK						0xb8a4
diff --git a/board/bmw/ns16550.h b/board/bmw/ns16550.h
index 8aa251d32..2087a4aab 100644
--- a/board/bmw/ns16550.h
+++ b/board/bmw/ns16550.h
@@ -37,7 +37,7 @@ struct NS16550 {
 #define afr iirfcrafr
 
 #define FCR_FIFO_EN     0x01	/*fifo enable */
-#define FCR_RXSR        0x02	/*reciever soft reset */
+#define FCR_RXSR        0x02	/*receiver soft reset */
 #define FCR_TXSR        0x04	/*transmitter soft reset */
 #define FCR_DMS		0x08	/* DMA Mode Select */
 
diff --git a/board/evb64260/bootseq.txt b/board/evb64260/bootseq.txt
index e4fefb31d..6cae9ea07 100644
--- a/board/evb64260/bootseq.txt
+++ b/board/evb64260/bootseq.txt
@@ -62,7 +62,7 @@ in_flash:
 	    remap gt regs?
 	    map PCI mem/io
 	    map device space
-	    clear out interupts
+	    clear out interrupts
 	init_timebase
 	env_init
 	serial_init
diff --git a/board/evb64260/i2c.c b/board/evb64260/i2c.c
index c62b64729..88d0dac46 100644
--- a/board/evb64260/i2c.c
+++ b/board/evb64260/i2c.c
@@ -306,7 +306,7 @@ i2c_read(uchar dev_addr, unsigned int offset, int len, uchar* data,
 	status = i2c_get_data(data, len);
 	if (status) {
 #ifdef DEBUG_I2C
-		printf("Data not recieved: 0x%02x\n", status);
+		printf("Data not received: 0x%02x\n", status);
 #endif
 		return status;
 	}
diff --git a/board/freescale/mpc8266ads/mpc8266ads.c b/board/freescale/mpc8266ads/mpc8266ads.c
index 66acc41e9..2caf4aa99 100644
--- a/board/freescale/mpc8266ads/mpc8266ads.c
+++ b/board/freescale/mpc8266ads/mpc8266ads.c
@@ -392,7 +392,7 @@ phys_size_t initdram(int board_type)
        The 11th column addre will still be mucxed correctly onto the bus.
 
        Also be aware that the MPC8266ADS board Rev B has not connected
-       Row addres 13 to anything.
+       Row address 13 to anything.
 
        The fix is to connect ADD16 (from U37-47) to SADDR12 (U28-126)
     */
diff --git a/board/intercontrol/digsy_mtc/eeprom.h b/board/intercontrol/digsy_mtc/eeprom.h
index 39e0378a5..fd1155536 100644
--- a/board/intercontrol/digsy_mtc/eeprom.h
+++ b/board/intercontrol/digsy_mtc/eeprom.h
@@ -27,6 +27,6 @@
 #define EEPROM_ADDR_IDENT	0	/* identification word offset */
 #define EEPROM_ADDR_LEN_SYS	2	/* system area lenght offset */
 #define EEPROM_ADDR_LEN_SYSCFG	4	/* system config area length offset */
-#define EEPROM_ADDR_ETHADDR	23	/* ethernet addres offset */
+#define EEPROM_ADDR_ETHADDR	23	/* ethernet address offset */
 
 #endif
diff --git a/board/mpl/common/usb_uhci.c b/board/mpl/common/usb_uhci.c
index a0094372a..89d2e0a4b 100644
--- a/board/mpl/common/usb_uhci.c
+++ b/board/mpl/common/usb_uhci.c
@@ -67,7 +67,7 @@
  *
  * Interrupt Transfers.
  * --------------------
- * For Interupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They
+ * For Interrupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They
  * will be inserted after the appropriate (depending the interval setting) skeleton TD.
  * If an interrupt has been detected the dev->irqhandler is called. The status and number
  * of transfered bytes is stored in dev->irq_status resp. dev->irq_act_len. If the
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index bd49b796c..5508d73ab 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -139,7 +139,7 @@ int flash_sect_roundb (ulong *addr)
 		} /* bank */
 	}
 	if (!found) {
-		/* error, addres not in flash */
+		/* error, address not in flash */
 		printf("Error: end address (0x%08lx) not in flash!\n", *addr);
 		return 1;
 	}
diff --git a/common/xyzModem.c b/common/xyzModem.c
index 7a46805e1..a1f955b9d 100644
--- a/common/xyzModem.c
+++ b/common/xyzModem.c
@@ -786,7 +786,7 @@ xyzModem_stream_terminate (bool abort, int (*getc) (void))
       ZM_DEBUG (zm_dprintf ("Engaging cleanup mode...\n"));
       /*
        * Consume any trailing crap left in the inbuffer from
-       * previous recieved blocks. Since very few files are an exact multiple
+       * previous received blocks. Since very few files are an exact multiple
        * of the transfer block size, there will almost always be some gunk here.
        * If we don't eat it now, RedBoot will think the user typed it.
        */
diff --git a/doc/README.m68k b/doc/README.m68k
index 3766b33bd..c85febc1f 100644
--- a/doc/README.m68k
+++ b/doc/README.m68k
@@ -111,7 +111,7 @@ CONFIG_SYS_MBAR	-- defines the base address of the MCF5272 configuration registe
 CONFIG_SYS_INIT_RAM_ADDR
 		-- defines the base address of the MCF5272 internal SRAM
 CONFIG_SYS_ENET_BD_BASE
-		-- defines the base addres of the FEC buffer descriptors
+		-- defines the base address of the FEC buffer descriptors
 
 CONFIG_SYS_SCR		-- defines the contents of the System Configuration Register
 CONFIG_SYS_SPR		-- defines the contents of the System Protection Register
@@ -138,7 +138,7 @@ CONFIG_SYS_INIT_RAM_ADDR
 CONFIG_SYS_INT_FLASH_BASE
 		-- defines the base address of the MCF5282 internal Flash memory
 CONFIG_SYS_ENET_BD_BASE
-		-- defines the base addres of the FEC buffer descriptors
+		-- defines the base address of the FEC buffer descriptors
 
 CONFIG_SYS_MFD
 		-- defines the PLL Multiplication Factor Devider
diff --git a/doc/README.qemu_mips b/doc/README.qemu_mips
index 398526424..e6a385573 100644
--- a/doc/README.qemu_mips
+++ b/doc/README.qemu_mips
@@ -24,7 +24,7 @@ you can downland
 
 #config to build the kernel
 qemu_mips_defconfig
-#patch to fix mips interupt init on 2.6.24.y kernel
+#patch to fix mips interrupt init on 2.6.24.y kernel
 qemu_mips_kernel.patch
 initrd.gz
 vmlinux
diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c
index b1763b18b..e616aaf5a 100644
--- a/drivers/net/4xx_enet.c
+++ b/drivers/net/4xx_enet.c
@@ -1704,7 +1704,7 @@ int enetInt (struct eth_device *dev)
 			rc = 0;
 		}
 
-		/* handle MAL RX EOB interupt from a receive */
+		/* handle MAL RX EOB interrupt from a receive */
 		/* check for EOB on valid channels	     */
 		if (uic_mal & UIC_MAL_RXEOB) {
 			mal_eob = mfdcr(MAL0_RXEOBISR);
diff --git a/drivers/net/greth.c b/drivers/net/greth.c
index 6c3222694..2aab52f37 100644
--- a/drivers/net/greth.c
+++ b/drivers/net/greth.c
@@ -576,7 +576,7 @@ int greth_recv(struct eth_device *dev)
 		GRETH_REGORIN(&regs->control, GRETH_RXEN);
 	}
       done:
-	/* return positive length of packet or 0 if non recieved */
+	/* return positive length of packet or 0 if non received */
 	return len;
 }
 
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 14b2d355c..9386adf87 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -282,7 +282,7 @@ OUTL(struct eth_device *dev, int command, u_long addr)
  * ready to send and receive packets.
  *
  * Side effects:
- *            leaves the natsemi initialized, and ready to recieve packets.
+ *            leaves the natsemi initialized, and ready to receive packets.
  *
  * Returns:   struct eth_device *:          pointer to NIC data structure
  */
diff --git a/drivers/net/ns8382x.c b/drivers/net/ns8382x.c
index 45402cc0e..6dfcd0e94 100644
--- a/drivers/net/ns8382x.c
+++ b/drivers/net/ns8382x.c
@@ -299,7 +299,7 @@ OUTL(struct eth_device *dev, int command, u_long addr)
  * Description: Retrieves the MAC address of the card, and sets up some
  *  globals required by other routines, and initializes the NIC, making it
  *  ready to send and receive packets.
- * Side effects: initializes ns8382xs, ready to recieve packets.
+ * Side effects: initializes ns8382xs, ready to receive packets.
  * Returns:   int:          number of cards found
  */
 
diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index ab461b45a..7f601d489 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -316,7 +316,7 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info)
 	hose->current_busno = hose->first_busno;
 
 	out_be32(&pci->pedr, 0xffffffff);	/* Clear any errors */
-	out_be32(&pci->peer, ~0x20140);	/* Enable All Error Interupts except
+	out_be32(&pci->peer, ~0x20140);	/* Enable All Error Interrupts except
 					 * - Master abort (pci)
 					 * - Master PERR (pci)
 					 * - ICCA (PCIe)
diff --git a/drivers/rtc/mpc5xxx.c b/drivers/rtc/mpc5xxx.c
index ec0b0ef68..6b3d5e690 100644
--- a/drivers/rtc/mpc5xxx.c
+++ b/drivers/rtc/mpc5xxx.c
@@ -44,7 +44,7 @@ typedef struct rtc5200 {
 	volatile ulong	aier;	/* MBAR+0x80C: alarm and interrupt enable register */
 	volatile ulong	ctr;	/* MBAR+0x810: current time register */
 	volatile ulong	cdr;	/* MBAR+0x814: current data register */
-	volatile ulong	asir;	/* MBAR+0x818: alarm and stopwatch interupt register */
+	volatile ulong	asir;	/* MBAR+0x818: alarm and stopwatch interrupt register */
 	volatile ulong	piber;	/* MBAR+0x81C: periodic interrupt and bus error register */
 	volatile ulong	trdr;	/* MBAR+0x820: test register/divides register */
 } RTC5200;
diff --git a/include/commproc.h b/include/commproc.h
index a69a80913..8b8cc45da 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -108,7 +108,7 @@ typedef struct cpm_buf_desc {
 	uint	cbd_bufaddr;	/* Buffer address in host memory */
 } cbd_t;
 
-#define BD_SC_EMPTY	((ushort)0x8000)	/* Recieve is empty */
+#define BD_SC_EMPTY	((ushort)0x8000)	/* Receive is empty */
 #define BD_SC_READY	((ushort)0x8000)	/* Transmit is ready */
 #define BD_SC_WRAP	((ushort)0x2000)	/* Last buffer descriptor */
 #define BD_SC_INTRPT	((ushort)0x1000)	/* Interrupt on change */
diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
index bdc93b6f1..92b7d6a1e 100644
--- a/include/configs/NETTA.h
+++ b/include/configs/NETTA.h
@@ -589,7 +589,7 @@
  +------+----------------+------------------------------------------------------------
  |  #   | Name           | Comment
  +------+----------------+------------------------------------------------------------
- | IRQ1 | UINTER_3V      | S interupt chips interrupt (common)
+ | IRQ1 | UINTER_3V      | S interrupt chips interrupt (common)
  | IRQ3 | IRQ_DSP        | DSP interrupt
  | IRQ4 | IRQ_DSP1       | Extra DSP interrupt
  +------+----------------+------------------------------------------------------------
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 7c9dd79e3..5cd517d94 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -39,7 +39,7 @@
 
 #define	CONFIG_SYS_TEXT_BASE	0x80000000
 
-/* IMMR Base Addres Register, use Freescale default: 0xff400000 */
+/* IMMR Base Address Register, use Freescale default: 0xff400000 */
 #define CONFIG_SYS_IMMR		0xff400000
 
 /* System clock. Primary input clock when in PCI host mode */
diff --git a/include/galileo/gt64260R.h b/include/galileo/gt64260R.h
index c2cfb0670..b55da9d35 100644
--- a/include/galileo/gt64260R.h
+++ b/include/galileo/gt64260R.h
@@ -1182,7 +1182,7 @@
 #define CHANNEL2_REGISTER10				0x9070
 #define CHANNEL2_REGISTER11				0x9074
 
-/* MPSCs Interupts  */
+/* MPSCs Interrupts  */
 
 #define MPSC0_CAUSE					0xb824
 #define MPSC0_MASK					0xb8a4
diff --git a/include/mpc5xxx_sdma.h b/include/mpc5xxx_sdma.h
index 8b740e4e6..821ac0ac6 100644
--- a/include/mpc5xxx_sdma.h
+++ b/include/mpc5xxx_sdma.h
@@ -82,11 +82,11 @@ ALL PARAMETERS ARE ALL LONGWORDS (FOUR BYTES EACH).
     sdma->IntPend = (1 << tasknum);                    \
 }
 
-/* get interupt pending bit of a task */
+/* get interrupt pending bit of a task */
 #define SDMA_GET_PENDINGBIT(tasknum)                   \
 	((*(vu_long *)(MPC5XXX_SDMA + 0x14)) & (1<<(tasknum)))
 
-/* get interupt mask bit of a task */
+/* get interrupt mask bit of a task */
 #define SDMA_GET_MASKBIT(tasknum)                      \
 	((*(vu_long *)(MPC5XXX_SDMA + 0x18)) & (1<<(tasknum)))
 
diff --git a/include/mpc824x.h b/include/mpc824x.h
index fca9371bd..cb8445830 100644
--- a/include/mpc824x.h
+++ b/include/mpc824x.h
@@ -258,7 +258,7 @@
 #define PLTR		0x8000000d  /* PCI Latancy Timer Register */
 #define PHTR		0x8000000e  /* PCI Header Type Register */
 #define BISTCTRL	0x8000000f  /* BIST Control */
-#define LMBAR		0x80000010  /* Local Base Addres Register */
+#define LMBAR		0x80000010  /* Local Base Address Register */
 #define PCSRBAR		0x80000014  /* PCSR Base Address Register */
 #define ILR		0x8000003c  /* PCI Interrupt Line Register */
 #define IPR		0x8000003d  /* Interrupt Pin Register */