Merge branch 'master' of /home/wd/git/u-boot/custodians

66 files changed, 1128 insertions, 450 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 4ee0e9af8..fe851f15d 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -58,7 +58,9 @@ COBJS-$(CONFIG_P1021)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1022)	+= ddr-gen3.o
 COBJS-$(CONFIG_P2010)	+= ddr-gen3.o
 COBJS-$(CONFIG_P2020)	+= ddr-gen3.o
+COBJS-$(CONFIG_PPC_P3041)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P4080)	+= ddr-gen3.o
+COBJS-$(CONFIG_PPC_P5020)	+= ddr-gen3.o
 
 COBJS-$(CONFIG_CPM2)	+= ether_fcc.o
 COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index fe2b52d86..f15d43c38 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -179,7 +179,7 @@ int checkcpu (void)
 
 #ifdef CONFIG_SYS_DPAA_FMAN
 	for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) {
-		printf("       FMAN%d: %s MHz\n", i,
+		printf("       FMAN%d: %s MHz\n", i + 1,
 			strmhz(buf1, sysinfo.freqFMan[i]));
 	}
 #endif
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index d491e2ad5..5d5b4c296 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -39,10 +39,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifdef CONFIG_MPC8536
-extern void fsl_serdes_init(void);
-#endif
-
 #ifdef CONFIG_QE
 extern qe_iop_conf_t qe_iop_conf_tab[];
 extern void qe_config_iopin(u8 port, u8 pin, int dir,
@@ -185,9 +181,6 @@ void cpu_init_f (void)
 	/* Config QE ioports */
 	config_qe_ioports();
 #endif
-#if defined(CONFIG_MPC8536)
-	fsl_serdes_init();
-#endif
 #if defined(CONFIG_FSL_DMA)
 	dma_init();
 #endif
@@ -332,6 +325,11 @@ int cpu_init_r(void)
 	qe_reset();
 #endif
 
+#if defined(CONFIG_SYS_HAS_SERDES)
+	/* needs to be in ram since code uses global static vars */
+	fsl_serdes_init();
+#endif
+
 #if defined(CONFIG_MP)
 	setup_mp();
 #endif
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index 2628cc5f9..932466e88 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -298,17 +298,17 @@ void fdt_add_enet_stashing(void *fdt)
 }
 
 #if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME)
-static void ft_fixup_clks(void *blob, const char *alias, unsigned long freq)
+static void ft_fixup_clks(void *blob, const char *compat, u32 offset,
+			  unsigned long freq)
 {
-	const char *path = fdt_get_alias(blob, alias);
-
-	int off = fdt_path_offset(blob, path);
+	phys_addr_t phys = offset + CONFIG_SYS_CCSRBAR_PHYS;
+	int off = fdt_node_offset_by_compat_reg(blob, compat, phys);
 
 	if (off >= 0) {
 		off = fdt_setprop_cell(blob, off, "clock-frequency", freq);
 		if (off > 0)
 			printf("WARNING enable to set clock-frequency "
-				"for %s: %s\n", alias, fdt_strerror(off));
+				"for %s: %s\n", compat, fdt_strerror(off));
 	}
 }
 
@@ -317,14 +317,17 @@ static void ft_fixup_dpaa_clks(void *blob)
 	sys_info_t sysinfo;
 
 	get_sys_info(&sysinfo);
-	ft_fixup_clks(blob, "fman0", sysinfo.freqFMan[0]);
+	ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET,
+			sysinfo.freqFMan[0]);
 
 #if (CONFIG_SYS_NUM_FMAN == 2)
-	ft_fixup_clks(blob, "fman1", sysinfo.freqFMan[1]);
+	ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET,
+			sysinfo.freqFMan[1]);
 #endif
 
 #ifdef CONFIG_SYS_DPAA_PME
-	ft_fixup_clks(blob, "pme", sysinfo.freqPME);
+	do_fixup_by_compat_u32(blob, "fsl,pme",
+		"clock-frequency", sysinfo.freqPME, 1);
 #endif
 }
 #else
@@ -400,6 +403,11 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 		"clock-frequency", bd->bi_brgfreq, 1);
 #endif
 
+#ifdef CONFIG_FSL_CORENET
+	do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-1.0",
+		"clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
+#endif
+
 	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 
 #ifdef CONFIG_MP
diff --git a/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c
index 7e72f5fb7..6dadeb8ca 100644
--- a/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c
@@ -66,10 +66,11 @@
 #define FSL_SRDSCR3_LANEE_SGMII	0x00000000
 #define FSL_SRDSCR3_LANEE_SATA	0x00150005
 
-
 #define SRDS1_MAX_LANES		8
 #define SRDS2_MAX_LANES		2
 
+static u32 serdes1_prtcl_map, serdes2_prtcl_map;
+
 static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = {
 	[0x2] = {PCIE1, PCIE1, PCIE1, PCIE1, NONE, NONE, NONE, NONE},
 	[0x3] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1},
@@ -86,39 +87,12 @@ static u8 serdes2_cfg_tbl[][SRDS2_MAX_LANES] = {
 
 int is_serdes_configured(enum srds_prtcl device)
 {
-	int i;
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 pordevsr = in_be32(&gur->pordevsr);
-	u32 srds1_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
-				MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+	int ret = (1 << device) & serdes1_prtcl_map;
 
-	u32 srds2_cfg = (pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >>
-				GUTS_PORDEVSR_SERDES2_IO_SEL_SHIFT;
-
-	debug("%s: dev = %d\n", __FUNCTION__, device);
-	debug("PORDEVSR[IO_SEL] = %x\n", srds1_cfg);
-	debug("PORDEVSR[SRDS2_IO_SEL] = %x\n", srds2_cfg);
-
-	if (srds1_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
-		printf("Invalid PORDEVSR[IO_SEL] = %d\n", srds1_cfg);
-		return 0;
-	}
-
-	if (srds2_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) {
-		printf("Invalid PORDEVSR[SRDS2_IO_SEL] = %d\n", srds2_cfg);
-		return 0;
-	}
-
-	for (i = 0; i < SRDS1_MAX_LANES; i++) {
-		if (serdes1_cfg_tbl[srds1_cfg][i] == device)
-			return 1;
-	}
-	for (i = 0; i < SRDS2_MAX_LANES; i++) {
-		if (serdes2_cfg_tbl[srds2_cfg][i] == device)
-			return 1;
-	}
+	if (ret)
+		return ret;
 
-	return 0;
+	return (1 << device) & serdes2_prtcl_map;
 }
 
 void fsl_serdes_init(void)
@@ -126,13 +100,20 @@ void fsl_serdes_init(void)
 	void *guts = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	void *sd = (void *)CONFIG_SYS_MPC85xx_SERDES2_ADDR;
 	u32 pordevsr = in_be32(guts + GUTS_PORDEVSR_OFFS);
-	u32 srds2_io_sel;
+	u32 srds1_io_sel, srds2_io_sel;
 	u32 tmp;
+	int lane;
+
+	srds1_io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+				MPC85xx_PORDEVSR_IO_SEL_SHIFT;
 
 	/* parse the SRDS2_IO_SEL of PORDEVSR */
 	srds2_io_sel = (pordevsr & GUTS_PORDEVSR_SERDES2_IO_SEL)
 		       >> GUTS_PORDEVSR_SERDES2_IO_SEL_SHIFT;
 
+	debug("PORDEVSR[SRDS1_IO_SEL] = %x\n", srds1_io_sel);
+	debug("PORDEVSR[SRDS2_IO_SEL] = %x\n", srds2_io_sel);
+
 	switch (srds2_io_sel) {
 	case 1:	/* Lane A - SATA1, Lane E - SATA2 */
 		/* CR 0 */
@@ -246,4 +227,23 @@ void fsl_serdes_init(void)
 	default:
 		break;
 	}
+
+	if (srds1_io_sel > ARRAY_SIZE(serdes1_cfg_tbl)) {
+		printf("Invalid PORDEVSR[SRDS1_IO_SEL] = %d\n", srds1_io_sel);
+		return;
+	}
+	for (lane = 0; lane < SRDS1_MAX_LANES; lane++) {
+		enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds1_io_sel][lane];
+		serdes1_prtcl_map |= (1 << lane_prtcl);
+	}
+
+	if (srds2_io_sel > ARRAY_SIZE(serdes2_cfg_tbl)) {
+		printf("Invalid PORDEVSR[SRDS2_IO_SEL] = %d\n", srds2_io_sel);
+		return;
+	}
+
+	for (lane = 0; lane < SRDS2_MAX_LANES; lane++) {
+		enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds2_io_sel][lane];
+		serdes2_prtcl_map |= (1 << lane_prtcl);
+	}
 }
diff --git a/arch/powerpc/cpu/mpc85xx/p1022_serdes.c b/arch/powerpc/cpu/mpc85xx/p1022_serdes.c
index 6b0fbf200..e4c9c2210 100644
--- a/arch/powerpc/cpu/mpc85xx/p1022_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/p1022_serdes.c
@@ -17,6 +17,8 @@
 #define SRDS1_MAX_LANES		4
 #define SRDS2_MAX_LANES		2
 
+static u32 serdes1_prtcl_map, serdes2_prtcl_map;
+
 static const u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = {
 	[0x00] = {NONE, NONE, NONE, NONE},
 	[0x01] = {NONE, NONE, NONE, NONE},
@@ -73,26 +75,40 @@ static const u8 serdes2_cfg_tbl[][SRDS2_MAX_LANES] = {
 
 int is_serdes_configured(enum srds_prtcl device)
 {
+	int ret = (1 << device) & serdes1_prtcl_map;
+
+	if (ret)
+		return ret;
+
+	return (1 << device) & serdes2_prtcl_map;
+}
+
+void fsl_serdes_init(void)
+{
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
 	u32 pordevsr = in_be32(&gur->pordevsr);
 	u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
 				MPC85xx_PORDEVSR_IO_SEL_SHIFT;
-	unsigned int i;
+	int lane;
 
-	debug("%s: dev = %d\n", __FUNCTION__, device);
-	debug("PORDEVSR[IO_SEL] = 0x%x\n", srds_cfg);
+	debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
 
 	if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
-		printf("Invalid PORDEVSR[IO_SEL] = %d\n", srds_cfg);
-		return 0;
+		printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
+		return;
+	}
+	for (lane = 0; lane < SRDS1_MAX_LANES; lane++) {
+		enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane];
+		serdes1_prtcl_map |= (1 << lane_prtcl);
 	}
 
-	for (i = 0; i < SRDS1_MAX_LANES; i++) {
-		if (serdes1_cfg_tbl[srds_cfg][i] == device)
-			return 1;
-		if (serdes2_cfg_tbl[srds_cfg][i] == device)
-			return 1;
+	if (srds_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) {
+		printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
+		return;
 	}
 
-	return 0;
+	for (lane = 0; lane < SRDS2_MAX_LANES; lane++) {
+		enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds_cfg][lane];
+		serdes2_prtcl_map |= (1 << lane_prtcl);
+	}
 }
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 22f342372..dc3da1689 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -80,10 +80,16 @@ struct cpu_type cpu_type_list [] = {
 	CPU_TYPE_ENTRY(P2010, P2010_E, 1),
 	CPU_TYPE_ENTRY(P2020, P2020, 2),
 	CPU_TYPE_ENTRY(P2020, P2020_E, 2),
+	CPU_TYPE_ENTRY(P3041, P3041, 4),
+	CPU_TYPE_ENTRY(P3041, P3041_E, 4),
 	CPU_TYPE_ENTRY(P4040, P4040, 4),
 	CPU_TYPE_ENTRY(P4040, P4040_E, 4),
 	CPU_TYPE_ENTRY(P4080, P4080, 8),
 	CPU_TYPE_ENTRY(P4080, P4080_E, 8),
+	CPU_TYPE_ENTRY(P5010, P5010, 1),
+	CPU_TYPE_ENTRY(P5010, P5010_E, 1),
+	CPU_TYPE_ENTRY(P5020, P5020, 2),
+	CPU_TYPE_ENTRY(P5020, P5020_E, 2),
 #elif defined(CONFIG_MPC86xx)
 	CPU_TYPE_ENTRY(8610, 8610, 1),
 	CPU_TYPE_ENTRY(8641, 8641, 2),
diff --git a/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c b/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
index 0f69ef97e..2fee99569 100644
--- a/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
+++ b/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
@@ -767,6 +767,13 @@ static u32 DQS_calibration_methodB(struct ddrautocal *cal)
 
 	debug("\n\n");
 
+#if defined(CONFIG_DDR_RFDC_FIXED)
+	mtsdram(SDRAM_RFDC, CONFIG_DDR_RFDC_FIXED);
+	size = 512;
+	rffd_average = CONFIG_DDR_RFDC_FIXED & SDRAM_RFDC_RFFD_MASK;
+	mfsdram(SDRAM_RDCC, rdcc);	/* record this value */
+	cal->rdcc = rdcc;
+#else /* CONFIG_DDR_RFDC_FIXED */
 	in_window = 0;
 	rdcc = 0;
 
@@ -830,6 +837,7 @@ static u32 DQS_calibration_methodB(struct ddrautocal *cal)
 		rffd_average = SDRAM_RFDC_RFFD_MAX;
 
 	mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
+#endif /* CONFIG_DDR_RFDC_FIXED */
 
 	rffd = rffd_average;
 	in_window = 0;
@@ -1211,10 +1219,14 @@ u32 DQS_autocalibration(void)
 		debug("*** best_result: read value SDRAM_RQDC 0x%08x\n",
 				rqdc_reg);
 
+#if defined(CONFIG_DDR_RFDC_FIXED)
+		mtsdram(SDRAM_RFDC, CONFIG_DDR_RFDC_FIXED);
+#else /* CONFIG_DDR_RFDC_FIXED */
 		mfsdram(SDRAM_RFDC, rfdc_reg);
 		rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
 		mtsdram(SDRAM_RFDC, rfdc_reg |
 				SDRAM_RFDC_RFFD_ENCODE(tcal.autocal.rffd));
+#endif /* CONFIG_DDR_RFDC_FIXED */
 
 		mfsdram(SDRAM_RFDC, rfdc_reg);
 		debug("*** best_result: read value SDRAM_RFDC 0x%08x\n",
diff --git a/arch/powerpc/cpu/ppc4xx/Makefile b/arch/powerpc/cpu/ppc4xx/Makefile
index 88d53fbb1..c9c1a331f 100644
--- a/arch/powerpc/cpu/ppc4xx/Makefile
+++ b/arch/powerpc/cpu/ppc4xx/Makefile
@@ -51,6 +51,9 @@ COBJS	+= cpu_init.o
 COBJS	+= denali_data_eye.o
 COBJS	+= denali_spd_ddr2.o
 COBJS	+= ecc.o
+ifdef CONFIG_CMD_ECCTEST
+COBJS	+= cmd_ecctest.o
+endif
 COBJS	+= fdt.o
 COBJS	+= interrupts.o
 COBJS	+= iop480_uart.o
diff --git a/arch/powerpc/cpu/ppc4xx/cmd_ecctest.c b/arch/powerpc/cpu/ppc4xx/cmd_ecctest.c
new file mode 100644
index 000000000..b4eac4057
--- /dev/null
+++ b/arch/powerpc/cpu/ppc4xx/cmd_ecctest.c
@@ -0,0 +1,284 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/cache.h>
+
+#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR) || \
+    defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
+#if defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC)
+
+#if defined(CONFIG_405EX)
+/*
+ * Currently only 405EX uses 16bit data bus width as an alternative
+ * option to 32bit data width (SDRAM0_MCOPT1_WDTH)
+ */
+#define SDRAM_DATA_ALT_WIDTH	2
+#else
+#define SDRAM_DATA_ALT_WIDTH	8
+#endif
+
+#if defined(CONFIG_SYS_OCM_BASE)
+#define CONFIG_FUNC_ISRAM_ADDR	CONFIG_SYS_OCM_BASE
+#endif
+
+#if defined(CONFIG_SYS_ISRAM_BASE)
+#define CONFIG_FUNC_ISRAM_ADDR	CONFIG_SYS_ISRAM_BASE
+#endif
+
+#if !defined(CONFIG_FUNC_ISRAM_ADDR)
+#error "No internal SRAM/OCM provided!"
+#endif
+
+#define force_inline inline __attribute__ ((always_inline))
+
+static inline void machine_check_disable(void)
+{
+	mtmsr(mfmsr() & ~MSR_ME);
+}
+
+static inline void machine_check_enable(void)
+{
+	mtmsr(mfmsr() | MSR_ME);
+}
+
+/*
+ * These helper functions need to be inlined, since they
+ * are called from the functions running from internal SRAM.
+ * SDRAM operation is forbidden at that time, so calling
+ * functions in SDRAM has to be avoided.
+ */
+static force_inline void wait_ddr_idle(void)
+{
+	u32 val;
+
+	do {
+		mfsdram(SDRAM_MCSTAT, val);
+	} while ((val & SDRAM_MCSTAT_IDLE_MASK) == SDRAM_MCSTAT_IDLE_NOT);
+}
+
+static force_inline void recalibrate_ddr(void)
+{
+	u32 val;
+
+	/*
+	 * Rewrite RQDC & RFDC to calibrate again. If this is not
+	 * done, the SDRAM controller is working correctly after
+	 * changing the MCOPT1_MCHK bits.
+	 */
+	mfsdram(SDRAM_RQDC, val);
+	mtsdram(SDRAM_RQDC, val);
+	mfsdram(SDRAM_RFDC, val);
+	mtsdram(SDRAM_RFDC, val);
+}
+
+static force_inline void set_mcopt1_mchk(u32 bits)
+{
+	u32 val;
+
+	wait_ddr_idle();
+	mfsdram(SDRAM_MCOPT1, val);
+	mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) | bits);
+	recalibrate_ddr();
+}
+
+/*
+ * The next 2 functions are copied to internal SRAM/OCM and run
+ * there. No function calls allowed here. No SDRAM acitivity should
+ * be done here.
+ */
+static void inject_ecc_error(void *ptr, int par)
+{
+	u32 val;
+
+	/*
+	 * Taken from PPC460EX/EXr/GT users manual (Rev 1.21)
+	 * 22.2.17.13 ECC Diagnostics
+	 *
+	 * Items 1 ... 5 are already done by now, running from RAM
+	 * with ECC enabled
+	 */
+
+	out_be32(ptr, 0x00000000);
+	val = in_be32(ptr);
+
+	/* 6. Set memory controller to no error checking */
+	set_mcopt1_mchk(SDRAM_MCOPT1_MCHK_NON);
+
+	/* 7. Modify one or two bits for error simulation */
+	if (par == 1)
+		out_be32(ptr, in_be32(ptr) ^ 0x00000001);
+	else
+		out_be32(ptr, in_be32(ptr) ^ 0x00000003);
+
+	/* 8. Wait for SDRAM idle */
+	val = in_be32(ptr);
+	set_mcopt1_mchk(SDRAM_MCOPT1_MCHK_CHK_REP);
+
+	/* Wait for SDRAM idle */
+	wait_ddr_idle();
+
+	/* Continue with 9. in calling function... */
+}
+
+static void rewrite_ecc_parity(void *ptr, int par)
+{
+	u32 current_address = (u32)ptr;
+	u32 end_address;
+	u32 address_increment;
+	u32 mcopt1;
+	u32 val;
+
+	/*
+	 * Fill ECC parity byte again. Otherwise further accesses to
+	 * the failure address will result in exceptions.
+	 */
+
+	/* Wait for SDRAM idle */
+	val = in_be32(0x00000000);
+	set_mcopt1_mchk(SDRAM_MCOPT1_MCHK_GEN);
+
+	/* ECC bit set method for non-cached memory */
+	mfsdram(SDRAM_MCOPT1, mcopt1);
+	if ((mcopt1 & SDRAM_MCOPT1_DMWD_MASK) == SDRAM_MCOPT1_DMWD_32)
+		address_increment = 4;
+	else
+		address_increment = SDRAM_DATA_ALT_WIDTH;
+	end_address = current_address + CONFIG_SYS_CACHELINE_SIZE;
+
+	while (current_address < end_address) {
+		*((unsigned long *)current_address) = 0;
+		current_address += address_increment;
+	}
+
+	set_mcopt1_mchk(SDRAM_MCOPT1_MCHK_CHK_REP);
+
+	/* Wait for SDRAM idle */
+	wait_ddr_idle();
+}
+
+static int do_ecctest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	u32 old_val;
+	u32 val;
+	u32 *ptr;
+	void (*sram_func)(u32 *, int);
+	int error;
+
+	if (argc < 3) {
+		cmd_usage(cmdtp);
+		return 1;
+	}
+
+	ptr = (u32 *)simple_strtoul(argv[1], NULL, 16);
+	error = simple_strtoul(argv[2], NULL, 16);
+	if ((error < 1) || (error > 2)) {
+		cmd_usage(cmdtp);
+		return 1;
+	}
+
+	printf("Using address %p for %d bit ECC error injection\n",
+	       ptr, error);
+
+	/*
+	 * Save value to restore it later on
+	 */
+	old_val = in_be32(ptr);
+
+	/*
+	 * Copy ECC injection function into internal SRAM/OCM
+	 */
+	sram_func = (void *)CONFIG_FUNC_ISRAM_ADDR;
+	memcpy((void *)CONFIG_FUNC_ISRAM_ADDR, inject_ecc_error, 0x10000);
+
+	/*
+	 * Disable interrupts and exceptions before calling this
+	 * function in internal SRAM/OCM
+	 */
+	disable_interrupts();
+	machine_check_disable();
+	eieio();
+
+	/*
+	 * Jump to ECC simulation function in internal SRAM/OCM
+	 */
+	(*sram_func)(ptr, error);
+
+	/* 10. Read the corresponding address */
+	val = in_be32(ptr);
+
+	/*
+	 * Read and print ECC status register/info:
+	 * The faulting address is only known upon uncorrectable ECC
+	 * errors.
+	 */
+	mfsdram(SDRAM_ECCES, val);
+	if (val & SDRAM_ECCES_CE)
+		printf("ECC: Correctable error\n");
+	if (val & SDRAM_ECCES_UE) {
+		printf("ECC: Uncorrectable error at 0x%02x%08x\n",
+		       mfdcr(SDRAM_ERRADDULL), mfdcr(SDRAM_ERRADDLLL));
+	}
+
+	/*
+	 * Clear pending interrupts/exceptions
+	 */
+	mtsdram(SDRAM_ECCES, 0xffffffff);
+	mtdcr(SDRAM_ERRSTATLL, 0xff000000);
+	set_mcsr(get_mcsr());
+
+	/* Now enable interrupts and exceptions again */
+	eieio();
+	machine_check_enable();
+	enable_interrupts();
+
+	/*
+	 * The ECC parity byte need to be re-written for the
+	 * corresponding address. Otherwise future accesses to it
+	 * will result in exceptions.
+	 *
+	 * Jump to ECC parity generation function
+	 */
+	memcpy((void *)CONFIG_FUNC_ISRAM_ADDR, rewrite_ecc_parity, 0x10000);
+	(*sram_func)(ptr, 0);
+
+	/*
+	 * Restore value in corresponding address
+	 */
+	out_be32(ptr, old_val);
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	ecctest,	3,	0,	do_ecctest,
+	"Test ECC by single and double error bit injection",
+	"address 1/2"
+);
+
+#endif /* defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC) */
+#endif /* defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)... */
diff --git a/arch/powerpc/cpu/ppc4xx/ecc.c b/arch/powerpc/cpu/ppc4xx/ecc.c
index f10560545..49f28d93e 100644
--- a/arch/powerpc/cpu/ppc4xx/ecc.c
+++ b/arch/powerpc/cpu/ppc4xx/ecc.c
@@ -130,7 +130,26 @@ static void program_ecc_addr(unsigned long start_address,
 
 		/* clear ECC error repoting registers */
 		mtsdram(SDRAM_ECCES, 0xffffffff);
-		mtdcr(0x4c, 0xffffffff);
+#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)
+		/*
+		 * IBM DDR(1) core (440GX):
+		 * Clear Mx bits in SDRAM0_BESR0/1
+		 */
+		mtsdram(SDRAM0_BESR0, 0xffffffff);
+		mtsdram(SDRAM0_BESR1, 0xffffffff);
+#elif defined(CONFIG_440)
+		/*
+		 * 440/460 DDR2 core:
+		 * Clear EMID (Error PLB Master ID) in MQ0_ESL
+		 */
+		mtdcr(SDRAM_ERRSTATLL, 0xfff00000);
+#else
+		/*
+		 * 405EX(r) DDR2 core:
+		 * Clear M0ID (Error PLB Master ID) in SDRAM_BESR
+		 */
+		mtsdram(SDRAM_BESR, 0xf0000000);
+#endif
 
 		mtsdram(SDRAM_MCOPT1,
 			(mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_CHK_REP);
diff --git a/arch/powerpc/cpu/ppc4xx/traps.c b/arch/powerpc/cpu/ppc4xx/traps.c
index 1616772f0..b5562ad97 100644
--- a/arch/powerpc/cpu/ppc4xx/traps.c
+++ b/arch/powerpc/cpu/ppc4xx/traps.c
@@ -209,6 +209,22 @@ MachineCheckException(struct pt_regs *regs)
 		/* Clear MCSR */
 		mtspr(SPRN_MCSR, val);
 	}
+
+#if defined(CONFIG_DDR_ECC) && defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
+	/*
+	 * Read and print ECC status register/info:
+	 * The faulting address is only known upon uncorrectable ECC
+	 * errors.
+	 */
+	mfsdram(SDRAM_ECCES, val);
+	if (val & SDRAM_ECCES_CE)
+		printf("ECC: Correctable error\n");
+	if (val & SDRAM_ECCES_UE) {
+		printf("ECC: Uncorrectable error at 0x%02x%08x\n",
+		       mfdcr(SDRAM_ERRADDULL), mfdcr(SDRAM_ERRADDLLL));
+	}
+#endif /* CONFIG_DDR_ECC ... */
+
 #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 	mfsdram(DDR0_00, val) ;
 	printf("DDR0: DDR0_00 %lx\n", val);
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index d88c282f7..f70699de2 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -44,8 +44,12 @@
 	defined(CONFIG_P1021) || defined(CONFIG_P1022) || \
 	defined(CONFIG_P2020) || defined(CONFIG_MPC8641)
 #define CONFIG_MAX_CPUS		2
+#elif defined(CONFIG_PPC_P3041)
+#define CONFIG_MAX_CPUS		4
 #elif defined(CONFIG_PPC_P4080)
 #define CONFIG_MAX_CPUS		8
+#elif defined(CONFIG_PPC_P5020)
+#define CONFIG_MAX_CPUS		2
 #else
 #define CONFIG_MAX_CPUS		1
 #endif
diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h
index bb875435d..dc5c579e1 100644
--- a/arch/powerpc/include/asm/fsl_pci.h
+++ b/arch/powerpc/include/asm/fsl_pci.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007,2009 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009-2010 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -29,8 +29,8 @@ int fsl_setup_hose(struct pci_controller *hose, unsigned long addr);
 int fsl_is_pci_agent(struct pci_controller *hose);
 void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data);
 void fsl_pci_config_unlock(struct pci_controller *hose);
-void ft_fsl_pci_setup(void *blob, const char *pci_alias,
-			struct pci_controller *hose);
+void ft_fsl_pci_setup(void *blob, const char *pci_compat,
+			struct pci_controller *hose, unsigned long ctrl_addr);
 
 /*
  * Common PCI/PCIE Register structure for mpc85xx and mpc86xx
@@ -202,4 +202,82 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info,
 	x.pci_num = num; \
 }
 
+#define __FT_FSL_PCI_SETUP(blob, compat, num) \
+	ft_fsl_pci_setup(blob, compat, &pci##num##_hose, \
+			 CONFIG_SYS_PCI##num##_ADDR)
+
+#define __FT_FSL_PCI_DEL(blob, compat, num) \
+	ft_fsl_pci_setup(blob, compat, NULL, CONFIG_SYS_PCI##num##_ADDR)
+
+#define __FT_FSL_PCIE_SETUP(blob, compat, num) \
+	ft_fsl_pci_setup(blob, compat, &pcie##num##_hose, \
+			 CONFIG_SYS_PCIE##num##_ADDR)
+
+#define __FT_FSL_PCIE_DEL(blob, compat, num) \
+	ft_fsl_pci_setup(blob, compat, NULL, CONFIG_SYS_PCIE##num##_ADDR)
+
+#ifdef CONFIG_PCI1
+#define FT_FSL_PCI1_SETUP __FT_FSL_PCI_SETUP(blob, FSL_PCI_COMPAT, 1)
+#else
+#define FT_FSL_PCI1_SETUP __FT_FSL_PCI_DEL(blob, FSL_PCI_COMPAT, 1)
+#endif
+
+#ifdef CONFIG_PCI2
+#define FT_FSL_PCI2_SETUP __FT_FSL_PCI_SETUP(blob, FSL_PCI_COMPAT, 2)
+#else
+#define FT_FSL_PCI2_SETUP __FT_FSL_PCI_DEL(blob, FSL_PCI_COMPAT, 2)
+#endif
+
+#ifdef CONFIG_PCIE1
+#define FT_FSL_PCIE1_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 1)
+#else
+#define FT_FSL_PCIE1_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 1)
+#endif
+
+#ifdef CONFIG_PCIE2
+#define FT_FSL_PCIE2_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 2)
+#else
+#define FT_FSL_PCIE2_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 2)
+#endif
+
+#ifdef CONFIG_PCIE3
+#define FT_FSL_PCIE3_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 3)
+#else
+#define FT_FSL_PCIE3_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 3)
+#endif
+
+#ifdef CONFIG_PCIE4
+#define FT_FSL_PCIE4_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 4)
+#else
+#define FT_FSL_PCIE4_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 4)
+#endif
+
+#if defined(CONFIG_FSL_CORENET)
+#define FSL_PCIE_COMPAT	"fsl,p4080-pcie"
+#define FT_FSL_PCI_SETUP \
+	FT_FSL_PCIE1_SETUP; \
+	FT_FSL_PCIE2_SETUP; \
+	FT_FSL_PCIE3_SETUP; \
+	FT_FSL_PCIE4_SETUP;
+#elif defined(CONFIG_MPC85xx)
+#define FSL_PCI_COMPAT	"fsl,mpc8540-pci"
+#define FSL_PCIE_COMPAT	"fsl,mpc8548-pcie"
+#define FT_FSL_PCI_SETUP \
+	FT_FSL_PCI1_SETUP; \
+	FT_FSL_PCI2_SETUP; \
+	FT_FSL_PCIE1_SETUP; \
+	FT_FSL_PCIE2_SETUP; \
+	FT_FSL_PCIE3_SETUP;
+#elif defined(CONFIG_MPC86xx)
+#define FSL_PCI_COMPAT	"fsl,mpc8610-pci"
+#define FSL_PCIE_COMPAT	"fsl,mpc8641-pcie"
+#define FT_FSL_PCI_SETUP \
+	FT_FSL_PCI1_SETUP; \
+	FT_FSL_PCIE1_SETUP; \
+	FT_FSL_PCIE2_SETUP;
+#else
+#error FT_FSL_PCI_SETUP not defined
+#endif
+
+
 #endif
diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h
index d4839f467..c7877b91a 100644
--- a/arch/powerpc/include/asm/fsl_serdes.h
+++ b/arch/powerpc/include/asm/fsl_serdes.h
@@ -44,5 +44,6 @@ enum srds_prtcl {
 };
 
 int is_serdes_configured(enum srds_prtcl device);
+void fsl_serdes_init(void);
 
 #endif /* __FSL_SERDES_H */
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 4e665d399..b1d219b7a 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2060,8 +2060,17 @@ typedef struct ccsr_sec {
 #define CONFIG_SYS_MPC85xx_LBC_OFFSET		0x5000
 #define CONFIG_SYS_MPC85xx_DDR2_OFFSET		0x6000
 #define CONFIG_SYS_MPC85xx_ESPI_OFFSET		0x7000
+#define CONFIG_SYS_MPC85xx_PCI1_OFFSET		0x8000
 #define CONFIG_SYS_MPC85xx_PCIX_OFFSET		0x8000
+#define CONFIG_SYS_MPC85xx_PCI2_OFFSET		0x9000
 #define CONFIG_SYS_MPC85xx_PCIX2_OFFSET		0x9000
+#define CONFIG_SYS_MPC85xx_PCIE1_OFFSET         0xa000
+#define CONFIG_SYS_MPC85xx_PCIE2_OFFSET         0x9000
+#if defined(CONFIG_MPC8572) || defined(CONFIG_P2020)
+#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET         0x8000
+#else
+#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET         0xb000
+#endif
 #define CONFIG_SYS_MPC85xx_GPIO_OFFSET		0xF000
 #define CONFIG_SYS_MPC85xx_SATA1_OFFSET		0x18000
 #define CONFIG_SYS_MPC85xx_SATA2_OFFSET		0x19000
@@ -2138,6 +2147,17 @@ typedef struct ccsr_sec {
 #define CONFIG_SYS_FSL_SEC_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET)
 
+#define CONFIG_SYS_PCI1_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCI1_OFFSET)
+#define CONFIG_SYS_PCI2_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCI2_OFFSET)
+#define CONFIG_SYS_PCIE1_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE1_OFFSET)
+#define CONFIG_SYS_PCIE2_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE2_OFFSET)
+#define CONFIG_SYS_PCIE3_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE3_OFFSET)
+
 #define TSEC_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
 #define MDIO_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
 
diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h
index b9e02dbc7..4bebb6856 100644
--- a/arch/powerpc/include/asm/immap_86xx.h
+++ b/arch/powerpc/include/asm/immap_86xx.h
@@ -1257,6 +1257,23 @@ extern immap_t  *immr;
 #define CONFIG_SYS_MPC86xx_DMA_OFFSET	(0x21000)
 #define CONFIG_SYS_MPC86xx_DMA_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DMA_OFFSET)
 
+#define CONFIG_SYS_MPC86xx_PCI1_OFFSET		0x8000
+#ifdef CONFIG_MPC8610
+#define CONFIG_SYS_MPC86xx_PCIE1_OFFSET         0xa000
+#else
+#define CONFIG_SYS_MPC86xx_PCIE1_OFFSET         0x8000
+#endif
+#define CONFIG_SYS_MPC86xx_PCIE2_OFFSET         0x9000
+
+#define CONFIG_SYS_PCI1_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PCI1_OFFSET)
+#define CONFIG_SYS_PCI2_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PCI2_OFFSET)
+#define CONFIG_SYS_PCIE1_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PCIE1_OFFSET)
+#define CONFIG_SYS_PCIE2_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PCIE2_OFFSET)
+
 #define CONFIG_SYS_TSEC1_OFFSET		0x24000
 #define CONFIG_SYS_MDIO1_OFFSET		0x24000
 #define CONFIG_SYS_LBC_ADDR		(&((immap_t *)CONFIG_SYS_IMMR)->im_lbc)
diff --git a/arch/powerpc/include/asm/ppc4xx-sdram.h b/arch/powerpc/include/asm/ppc4xx-sdram.h
index d9506e27c..4ec1ef866 100644
--- a/arch/powerpc/include/asm/ppc4xx-sdram.h
+++ b/arch/powerpc/include/asm/ppc4xx-sdram.h
@@ -63,6 +63,8 @@
 #define SDRAM_CFG0	0x20	/* memory controller options 0		*/
 #define SDRAM_CFG1	0x21	/* memory controller options 1		*/
 
+#define SDRAM0_BESR0	0x0000	/* bus error status reg 0		*/
+#define SDRAM0_BESR1	0x0008	/* bus error status reg 1		*/
 #define SDRAM0_BEAR	0x0010	/* bus error address reg		*/
 #define SDRAM0_SLIO	0x0018	/* ddr sdram slave interface options	*/
 #define SDRAM0_CFG0	0x0020	/* ddr sdram options 0			*/
@@ -363,6 +365,7 @@
 /*
  * Memory controller registers
  */
+#ifdef CONFIG_405EX
 #define SDRAM_BESR	0x00	/* PLB bus error status (read/clear)         */
 #define SDRAM_BESRT	0x01	/* PLB bus error status (test/set)           */
 #define SDRAM_BEARL	0x02	/* PLB bus error address low                 */
@@ -371,11 +374,10 @@
 #define SDRAM_WMIRQT	0x07	/* PLB write master interrupt (test/set)     */
 #define SDRAM_PLBOPT	0x08	/* PLB slave options                         */
 #define SDRAM_PUABA	0x09	/* PLB upper address base                    */
-#ifndef CONFIG_405EX
-#define SDRAM_MCSTAT	0x14	/* memory controller status                  */
-#else
 #define SDRAM_MCSTAT	0x1F	/* memory controller status                  */
-#endif
+#else /* CONFIG_405EX */
+#define SDRAM_MCSTAT	0x14	/* memory controller status                  */
+#endif /* CONFIG_405EX */
 #define SDRAM_MCOPT1	0x20	/* memory controller options 1               */
 #define SDRAM_MCOPT2	0x21	/* memory controller options 2               */
 #define SDRAM_MODT0	0x22	/* on die termination for bank 0             */
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 844552c2d..89f283a6c 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1052,10 +1052,16 @@
 #define SVR_P2010_E	0x80EB00
 #define SVR_P2020	0x80E200
 #define SVR_P2020_E	0x80EA00
+#define SVR_P3041	0x821103
+#define SVR_P3041_E	0x821903
 #define SVR_P4040	0x820100
 #define SVR_P4040_E	0x820900
 #define SVR_P4080	0x820000
 #define SVR_P4080_E	0x820800
+#define SVR_P5010	0x822100
+#define SVR_P5010_E	0x822900
+#define SVR_P5020	0x822000
+#define SVR_P5020_E	0x822800
 
 #define SVR_8610	0x80A000
 #define SVR_8641	0x809000
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
index 23874d266..158f7bb27 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -34,7 +34,17 @@ extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH ch
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define CONFIG_SYS_BCSR3_PCIE		0x10
+	struct board_bcsr {
+		u8	board_id;
+		u8	cpld_rev;
+		u8	led_user;
+		u8	board_status;
+		u8	reset_ctrl;
+		u8	flash_ctrl;
+		u8	eth_ctrl;
+		u8	usb_ctrl;
+		u8	irq_ctrl;
+};
 
 #define BOARD_CANYONLANDS_PCIE	1
 #define BOARD_CANYONLANDS_SATA	2
@@ -112,6 +122,9 @@ int board_early_init_f(void)
 {
 #if !defined(CONFIG_ARCHES)
 	u32 sdr0_cust0;
+	struct board_bcsr *bcsr_data =
+		(struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
+
 #endif
 
 	/*
@@ -172,14 +185,10 @@ int board_early_init_f(void)
 
 #if !defined(CONFIG_ARCHES)
 	/* Enable ethernet and take out of reset */
-	out_8((void *)CONFIG_SYS_BCSR_BASE + 6, 0);
+	out_8(&bcsr_data->eth_ctrl, 0) ;
 
 	/* Remove NOR-FLASH, NAND-FLASH & EEPROM hardware write protection */
-	out_8((void *)CONFIG_SYS_BCSR_BASE + 5, 0);
-
-	/* Enable USB host & USB-OTG */
-	out_8((void *)CONFIG_SYS_BCSR_BASE + 7, 0);
-
+	out_8(&bcsr_data->flash_ctrl, 0) ;
 	mtsdr(SDR0_SRST1, 0);	/* Pull AHB out of reset default=1 */
 
 	/* Setup PLB4-AHB bridge based on the system address map */
@@ -201,6 +210,41 @@ int board_early_init_f(void)
 	return 0;
 }
 
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT)
+int usb_board_init(void)
+{
+	struct board_bcsr *bcsr_data =
+		(struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
+	u8 val;
+
+	/* Enable USB host & USB-OTG */
+	val = in_8(&bcsr_data->usb_ctrl);
+	val &= ~(BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST);
+	out_8(&bcsr_data->usb_ctrl, val);
+
+	return 0;
+}
+
+int usb_board_stop(void)
+{
+	struct board_bcsr *bcsr_data =
+		(struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
+	u8 val;
+
+	/* Disable USB host & USB-OTG */
+	val = in_8(&bcsr_data->usb_ctrl);
+	val |= (BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST);
+	out_8(&bcsr_data->usb_ctrl, val);
+
+	return 0;
+}
+
+int usb_board_init_fail(void)
+{
+	return usb_board_stop();
+}
+#endif /* CONFIG_USB_OHCI_NEW && CONFIG_SYS_USB_OHCI_BOARD_INIT */
+
 #if !defined(CONFIG_ARCHES)
 static void canyonlands_sata_init(int board_type)
 {
@@ -244,11 +288,13 @@ int get_cpu_num(void)
 #if !defined(CONFIG_ARCHES)
 int checkboard(void)
 {
+	struct board_bcsr *bcsr_data =
+		(struct board_bcsr *)CONFIG_SYS_BCSR_BASE;
 	char *s = getenv("serial#");
 
 	if (pvr_460ex()) {
 		printf("Board: Canyonlands - AMCC PPC460EX Evaluation Board");
-		if (in_8((void *)(CONFIG_SYS_BCSR_BASE + 3)) & CONFIG_SYS_BCSR3_PCIE)
+		if (in_8(&bcsr_data->board_status) & BCSR_SELECT_PCIE)
 			gd->board_type = BOARD_CANYONLANDS_PCIE;
 		else
 			gd->board_type = BOARD_CANYONLANDS_SATA;
@@ -268,7 +314,7 @@ int checkboard(void)
 		break;
 	}
 
-	printf(", Rev. %X", in_8((void *)(CONFIG_SYS_BCSR_BASE + 0)));
+	printf(", Rev. %X", in_8(&bcsr_data->cpld_rev));
 
 	if (s != NULL) {
 		puts(", serial# ");
diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c
index 4f7d935df..671f9e985 100644
--- a/board/atum8548/atum8548.c
+++ b/board/atum8548/atum8548.c
@@ -292,14 +292,6 @@ void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
 
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCI2
-	ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
-#endif
+	FT_FSL_PCI_SETUP;
 }
 #endif
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index 50ca3cae9..c8e08563b 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -396,26 +396,8 @@ void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
 
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#else
-	ft_fsl_pci_setup(blob, "pci0", NULL);
-#endif
-#ifdef CONFIG_PCIE2
-	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
-#else
-	ft_fsl_pci_setup(blob, "pci1", NULL);
-#endif
-#ifdef CONFIG_PCIE2
-	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
-#else
-	ft_fsl_pci_setup(blob, "pci2", NULL);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci3", &pcie3_hose);
-#else
-	ft_fsl_pci_setup(blob, "pci3", NULL);
-#endif
+	FT_FSL_PCI_SETUP;
+
 #ifdef CONFIG_FSL_SGMII_RISER
 	fsl_sgmii_riser_fdt_fixup(blob);
 #endif
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index 581d5f26e..da3a2b6ee 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007,2009 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009-2010 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -360,19 +360,8 @@ void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
 
+	FT_FSL_PCI_SETUP;
 
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE2
-	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci2", &pcie3_hose);
-#endif
-#ifdef CONFIG_PCIE3
-	ft_fsl_pci_setup(blob, "pci3", &pcie2_hose);
-#endif
 #ifdef CONFIG_FSL_SGMII_RISER
 	fsl_sgmii_riser_fdt_fixup(blob);
 #endif
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index f0169959a..23e552bde 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004, 2007, 200 Freescale Semiconductor, Inc.
+ * Copyright 2004, 2007, 2009-2010 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
  *
@@ -388,11 +388,6 @@ int last_stage_init(void)
 #if defined(CONFIG_OF_BOARD_SETUP)
 void ft_pci_setup(void *blob, bd_t *bd)
 {
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
-#endif
+	FT_FSL_PCI_SETUP;
 }
 #endif
diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index 036bf9528..bd859e4ee 100644
--- a/board/freescale/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007,2009 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009-2010 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
  *
@@ -426,11 +426,6 @@ void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
 
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
-#endif
+	FT_FSL_PCI_SETUP;
 }
 #endif
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index 81e8ff51e..01b7dcb70 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009 Freescale Semiconductor.
+ * Copyright 2009-2010 Freescale Semiconductor.
  *
  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
  *
@@ -635,9 +635,8 @@ void ft_board_setup(void *blob, bd_t *bd)
 #endif
 	ft_cpu_setup(blob, bd);
 
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
-#endif
+	FT_FSL_PCI_SETUP;
+
 	fdt_board_fixup_esdhc(blob, bd);
 	fdt_board_fixup_qe_uart(blob, bd);
 	fdt_board_fixup_qe_usb(blob, bd);
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index 81d481a17..6b96dfc16 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -345,15 +345,8 @@ void ft_board_setup(void *blob, bd_t *bd)
 
 	fdt_fixup_memory(blob, (u64)base, (u64)size);
 
-#ifdef CONFIG_PCIE3
-	ft_fsl_pci_setup(blob, "pci0", &pcie3_hose);
-#endif
-#ifdef CONFIG_PCIE2
-	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
-#endif
+	FT_FSL_PCI_SETUP;
+
 #ifdef CONFIG_FSL_SGMII_RISER
 	fsl_sgmii_riser_fdt_fixup(blob);
 #endif
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
index 2ef7b2323..6578f58db 100644
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007,2009 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009-2010 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -309,15 +309,7 @@ ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
 
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
-#endif
-#ifdef CONFIG_PCIE2
-	ft_fsl_pci_setup(blob, "pci2", &pcie2_hose);
-#endif
+	FT_FSL_PCI_SETUP;
 }
 #endif
 
diff --git a/board/freescale/mpc8641hpcn/law.c b/board/freescale/mpc8641hpcn/law.c
index bd357b866..8c8ce9585 100644
--- a/board/freescale/mpc8641hpcn/law.c
+++ b/board/freescale/mpc8641hpcn/law.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008 Freescale Semiconductor, Inc.
+ * Copyright 2008,2010 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -32,14 +32,14 @@
  *
  * 0x0000_0000     0x7fff_ffff     DDR                     2G
  * if PCI (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT)
- * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
- * 0xa000_0000     0xbfff_ffff     PCI2 MEM                512M
+ * 0x8000_0000     0x9fff_ffff     PCIE1 MEM                512M
+ * 0xa000_0000     0xbfff_ffff     PCIE2 MEM                512M
  * else if RIO (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT)
  * 0x8000_0000     0x9fff_ffff     RapidIO                 512M
  * endif
  * (prepend 0xf_0000_0000 if CONFIG_PHYS_64BIT)
- * 0xffc0_0000     0xffc0_ffff     PCI1 IO                 64K
- * 0xffc1_0000     0xffc1_ffff     PCI2 IO                 64K
+ * 0xffc0_0000     0xffc0_ffff     PCIE1 IO                 64K
+ * 0xffc1_0000     0xffc1_ffff     PCIE2 IO                 64K
  * 0xffe0_0000     0xffef_ffff     CCSRBAR                 1M
  * 0xffdf_0000     0xffe0_0000     PIXIS, CF               64K
  * 0xef80_0000     0xefff_ffff     FLASH (boot bank)       8M
@@ -54,10 +54,10 @@ struct law_entry law_table[] = {
 	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
 #endif
 #ifdef CONFIG_PCI
-	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
-	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2),
 #elif defined(CONFIG_RIO)
 	SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
 #endif
diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index b352c334c..d86ca12aa 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2006, 2007 Freescale Semiconductor.
+ * Copyright 2006, 2007, 2010 Freescale Semiconductor.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -129,21 +129,21 @@ fixed_sdram(void)
 
 
 #if defined(CONFIG_PCI)
-static struct pci_controller pci1_hose;
+static struct pci_controller pcie1_hose;
 #endif /* CONFIG_PCI */
 
-#ifdef CONFIG_PCI2
-static struct pci_controller pci2_hose;
-#endif	/* CONFIG_PCI2 */
+#ifdef CONFIG_PCIE2
+static struct pci_controller pcie2_hose;
+#endif	/* CONFIG_PCIE2 */
 
 int first_free_busno = 0;
 
 void pci_init_board(void)
 {
-#ifdef CONFIG_PCI1
+#ifdef CONFIG_PCIE1
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
-	struct pci_controller *hose = &pci1_hose;
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
+	struct pci_controller *hose = &pcie1_hose;
 	struct pci_region *r = hose->regions;
 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
@@ -169,16 +169,16 @@ void pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_MEM_BUS,
-			       CONFIG_SYS_PCI1_MEM_PHYS,
-			       CONFIG_SYS_PCI1_MEM_SIZE,
+			       CONFIG_SYS_PCIE1_MEM_BUS,
+			       CONFIG_SYS_PCIE1_MEM_PHYS,
+			       CONFIG_SYS_PCIE1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_IO_BUS,
-			       CONFIG_SYS_PCI1_IO_PHYS,
-			       CONFIG_SYS_PCI1_IO_SIZE,
+			       CONFIG_SYS_PCIE1_IO_BUS,
+			       CONFIG_SYS_PCIE1_IO_PHYS,
+			       CONFIG_SYS_PCIE1_IO_SIZE,
 			       PCI_REGION_IO);
 
 		hose->region_count = r - hose->regions;
@@ -195,8 +195,8 @@ void pci_init_board(void)
 		 * Activate ULI1575 legacy chip by performing a fake
 		 * memory access.  Needed to make ULI RTC work.
 		 */
-		in_be32((unsigned *) ((char *)(CONFIG_SYS_PCI1_MEM_VIRT
-				       + CONFIG_SYS_PCI1_MEM_SIZE - 0x1000000)));
+		in_be32((unsigned *) ((char *)(CONFIG_SYS_PCIE1_MEM_VIRT
+				       + CONFIG_SYS_PCIE1_MEM_SIZE - 0x1000000)));
 
 	} else {
 		puts("PCI-EXPRESS 1: Disabled\n");
@@ -204,26 +204,26 @@ void pci_init_board(void)
 }
 #else
 	puts("PCI-EXPRESS1: Disabled\n");
-#endif /* CONFIG_PCI1 */
+#endif /* CONFIG_PCIE1 */
 
-#ifdef CONFIG_PCI2
+#ifdef CONFIG_PCIE2
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR;
-	struct pci_controller *hose = &pci2_hose;
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
+	struct pci_controller *hose = &pcie2_hose;
 	struct pci_region *r = hose->regions;
 
 	/* outbound memory */
 	pci_set_region(r++,
-		       CONFIG_SYS_PCI2_MEM_BUS,
-		       CONFIG_SYS_PCI2_MEM_PHYS,
-		       CONFIG_SYS_PCI2_MEM_SIZE,
+		       CONFIG_SYS_PCIE2_MEM_BUS,
+		       CONFIG_SYS_PCIE2_MEM_PHYS,
+		       CONFIG_SYS_PCIE2_MEM_SIZE,
 		       PCI_REGION_MEM);
 
 	/* outbound io */
 	pci_set_region(r++,
-		       CONFIG_SYS_PCI2_IO_BUS,
-		       CONFIG_SYS_PCI2_IO_PHYS,
-		       CONFIG_SYS_PCI2_IO_SIZE,
+		       CONFIG_SYS_PCIE2_IO_BUS,
+		       CONFIG_SYS_PCIE2_IO_PHYS,
+		       CONFIG_SYS_PCIE2_IO_SIZE,
 		       PCI_REGION_IO);
 
 	hose->region_count = r - hose->regions;
@@ -238,7 +238,7 @@ void pci_init_board(void)
 }
 #else
 	puts("PCI-EXPRESS 2: Disabled\n");
-#endif /* CONFIG_PCI2 */
+#endif /* CONFIG_PCIE2 */
 
 }
 
@@ -253,12 +253,7 @@ ft_board_setup(void *blob, bd_t *bd)
 
 	ft_cpu_setup(blob, bd);
 
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCI2
-	ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
-#endif
+	FT_FSL_PCI_SETUP;
 
 	/*
 	 * Warn if it looks like the device tree doesn't match u-boot.
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
index be692cb45..5cdee9ff7 100644
--- a/board/freescale/p1022ds/p1022ds.c
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -322,23 +322,7 @@ void ft_board_setup(void *blob, bd_t *bd)
 
 	fdt_fixup_memory(blob, (u64)base, (u64)size);
 
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci0", &pcie1_hose);
-#else
-	ft_fsl_pci_setup(blob, "pci0", NULL);
-#endif
-
-#ifdef CONFIG_PCIE2
-	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
-#else
-	ft_fsl_pci_setup(blob, "pci1", NULL);
-#endif
-
-#ifdef CONFIG_PCIE3
-	ft_fsl_pci_setup(blob, "pci2", &pcie3_hose);
-#else
-	ft_fsl_pci_setup(blob, "pci2", NULL);
-#endif
+	FT_FSL_PCI_SETUP;
 
 #ifdef CONFIG_FSL_SGMII_RISER
 	fsl_sgmii_riser_fdt_fixup(blob);
diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c
index aa2f64ca9..97d4f834b 100644
--- a/board/freescale/p1_p2_rdb/pci.c
+++ b/board/freescale/p1_p2_rdb/pci.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -100,16 +100,5 @@ void pci_init_board(void)
 
 void ft_pci_board_setup(void *blob)
 {
-/* According to h/w manual, PCIE2 is at lower address(0x9000)
- * than PCIE1(0xa000).
- * Hence PCIE2 is made to occupy the pci1 position in dts to
- * keep the addresses sorted there.
- * Generally the case with all FSL SOCs.
- */
-#ifdef CONFIG_PCIE2
-	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
-#endif
+	FT_FSL_PCI_SETUP;
 }
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index be4b2eb47..3fd1b347a 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright 2007-2010 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -366,15 +366,8 @@ void ft_board_setup(void *blob, bd_t *bd)
 
 	fdt_fixup_memory(blob, (u64)base, (u64)size);
 
-#ifdef CONFIG_PCIE3
-	ft_fsl_pci_setup(blob, "pci0", &pcie3_hose);
-#endif
-#ifdef CONFIG_PCIE2
-	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
-#endif
+	FT_FSL_PCI_SETUP;
+
 #ifdef CONFIG_FSL_SGMII_RISER
 	fsl_sgmii_riser_fdt_fixup(blob);
 #endif
diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
index d62cfd1be..733979c61 100644
--- a/board/sbc8548/sbc8548.c
+++ b/board/sbc8548/sbc8548.c
@@ -398,11 +398,9 @@ int last_stage_init(void)
 void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
+
+#ifdef CONFIG_FSL_PCI_INIT
+	FT_FSL_PCI_SETUP;
 #endif
 }
 #endif
diff --git a/board/sbc8641d/law.c b/board/sbc8641d/law.c
index d20fa51c3..705e1c296 100644
--- a/board/sbc8641d/law.c
+++ b/board/sbc8641d/law.c
@@ -32,11 +32,11 @@
  *
  * 0x0000_0000	DDR			256M
  * 0x1000_0000	DDR2			256M
- * 0x8000_0000	PCI1 MEM		512M
- * 0xa000_0000	PCI2 MEM		512M
+ * 0x8000_0000	PCIE1 MEM		512M
+ * 0xa000_0000	PCIE2 MEM		512M
  * 0xc000_0000	RapidIO			512M
- * 0xe200_0000	PCI1 IO			16M
- * 0xe300_0000	PCI2 IO			16M
+ * 0xe200_0000	PCIE1 IO		16M
+ * 0xe300_0000	PCIE2 IO		16M
  * 0xf800_0000	CCSRBAR			2M
  * 0xfe00_0000	FLASH (boot bank)	32M
  *
@@ -49,11 +49,11 @@ struct law_entry law_table[] = {
 	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
 		 LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
 #endif
-	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
 	SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
-	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
 	SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC),
 	SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
 };
diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c
index c4e987532..54b2d0b16 100644
--- a/board/sbc8641d/sbc8641d.c
+++ b/board/sbc8641d/sbc8641d.c
@@ -191,16 +191,16 @@ static struct pci_config_table pci_fsl86xxads_config_table[] = {
 };
 #endif
 
-static struct pci_controller pci1_hose = {
+static struct pci_controller pcie1_hose = {
 #ifndef CONFIG_PCI_PNP
 	config_table:pci_mpc86xxcts_config_table
 #endif
 };
 #endif /* CONFIG_PCI */
 
-#ifdef CONFIG_PCI2
-static struct pci_controller pci2_hose;
-#endif	/* CONFIG_PCI2 */
+#ifdef CONFIG_PCIE2
+static struct pci_controller pcie2_hose;
+#endif	/* CONFIG_PCIE2 */
 
 int first_free_busno = 0;
 
@@ -212,10 +212,10 @@ void pci_init_board(void)
 	uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL)
 		>> MPC8641_PORDEVSR_IO_SEL_SHIFT;
 
-#ifdef CONFIG_PCI1
+#ifdef CONFIG_PCIE1
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
-	struct pci_controller *hose = &pci1_hose;
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
+	struct pci_controller *hose = &pcie1_hose;
 	struct pci_region *r = hose->regions;
 #ifdef DEBUG
 	uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA)
@@ -236,16 +236,16 @@ void pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_MEM_BUS,
-			       CONFIG_SYS_PCI1_MEM_PHYS,
-			       CONFIG_SYS_PCI1_MEM_SIZE,
+			       CONFIG_SYS_PCIE1_MEM_BUS,
+			       CONFIG_SYS_PCIE1_MEM_PHYS,
+			       CONFIG_SYS_PCIE1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_IO_BUS,
-			       CONFIG_SYS_PCI1_IO_PHYS,
-			       CONFIG_SYS_PCI1_IO_SIZE,
+			       CONFIG_SYS_PCIE1_IO_BUS,
+			       CONFIG_SYS_PCIE1_IO_PHYS,
+			       CONFIG_SYS_PCIE1_IO_SIZE,
 			       PCI_REGION_IO);
 
 		hose->region_count = r - hose->regions;
@@ -264,26 +264,26 @@ void pci_init_board(void)
 }
 #else
 	puts("PCI-EXPRESS1: Disabled\n");
-#endif /* CONFIG_PCI1 */
+#endif /* CONFIG_PCIE1 */
 
-#ifdef CONFIG_PCI2
+#ifdef CONFIG_PCIE2
 {
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR;
-	struct pci_controller *hose = &pci2_hose;
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
+	struct pci_controller *hose = &pcie2_hose;
 	struct pci_region *r = hose->regions;
 
 	/* outbound memory */
 	pci_set_region(r++,
-		       CONFIG_SYS_PCI2_MEM_BUS,
-		       CONFIG_SYS_PCI2_MEM_PHYS,
-		       CONFIG_SYS_PCI2_MEM_SIZE,
+		       CONFIG_SYS_PCIE2_MEM_BUS,
+		       CONFIG_SYS_PCIE2_MEM_PHYS,
+		       CONFIG_SYS_PCIE2_MEM_SIZE,
 		       PCI_REGION_MEM);
 
 	/* outbound io */
 	pci_set_region(r++,
-		       CONFIG_SYS_PCI2_IO_BUS,
-		       CONFIG_SYS_PCI2_IO_PHYS,
-		       CONFIG_SYS_PCI2_IO_SIZE,
+		       CONFIG_SYS_PCIE2_IO_BUS,
+		       CONFIG_SYS_PCIE2_IO_PHYS,
+		       CONFIG_SYS_PCIE2_IO_SIZE,
 		       PCI_REGION_IO);
 
 	hose->region_count = r - hose->regions;
@@ -298,7 +298,7 @@ void pci_init_board(void)
 }
 #else
 	puts("PCI-EXPRESS 2: Disabled\n");
-#endif /* CONFIG_PCI2 */
+#endif /* CONFIG_PCIE2 */
 
 }
 
@@ -308,12 +308,7 @@ void ft_board_setup (void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
 
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCI2
-	ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
-#endif
+	FT_FSL_PCI_SETUP;
 }
 #endif
 
diff --git a/board/t3corp/chip_config.c b/board/t3corp/chip_config.c
index c00bf16bd..98ab49f49 100644
--- a/board/t3corp/chip_config.c
+++ b/board/t3corp/chip_config.c
@@ -27,13 +27,27 @@
 
 struct ppc4xx_config ppc4xx_config_val[] = {
 	{
-		"600", "CPU: 600 PLB: 200 OPB: 100 EBC: 100",
+		"600-67", "CPU: 600 PLB: 200 OPB:  67 EBC:  67",
+		{
+			0x86, 0x80, 0xce, 0x1f, 0x7d, 0x80, 0x00, 0xe0,
+			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"600-100", "CPU: 600 PLB: 200 OPB: 100 EBC: 100",
 		{
 			0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0,
 			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
 		}
 	},
 	{
+		"667", "CPU: 667 PLB: 166 OPB:  83 EBC:  83",
+		{
+			0x06, 0x80, 0xbb, 0x14, 0x99, 0x82, 0x00, 0xa0,
+			0x40, 0x88, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
 		"800", "CPU: 800 PLB: 200 OPB: 100 EBC: 100",
 		{
 			0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0,
diff --git a/board/t3corp/init.S b/board/t3corp/init.S
index 4a4217fc8..ecd35ff7b 100644
--- a/board/t3corp/init.S
+++ b/board/t3corp/init.S
@@ -81,11 +81,13 @@ tlbtab:
 	tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x08010000, 0xc, AC_RW | SA_IG)
 
 	/* TLB-entry for FPGA(s) */
-	tlbentry(CONFIG_SYS_FPGA1_BASE, SZ_1M, CONFIG_SYS_FPGA1_BASE, 4,
+	tlbentry(CONFIG_SYS_FPGA1_BASE, SZ_16M, CONFIG_SYS_FPGA1_BASE, 4,
 		 AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_FPGA2_BASE, SZ_1M, CONFIG_SYS_FPGA2_BASE, 4,
+	tlbentry(CONFIG_SYS_FPGA1_BASE + (16 << 20), SZ_16M,
+		 CONFIG_SYS_FPGA1_BASE + (16 << 20), 4, AC_RW | SA_IG)
+	tlbentry(CONFIG_SYS_FPGA2_BASE, SZ_16M, CONFIG_SYS_FPGA2_BASE, 4,
 		 AC_RW | SA_IG)
-	tlbentry(CONFIG_SYS_FPGA3_BASE, SZ_1M, CONFIG_SYS_FPGA3_BASE, 4,
+	tlbentry(CONFIG_SYS_FPGA3_BASE, SZ_16M, CONFIG_SYS_FPGA3_BASE, 4,
 		 AC_RW | SA_IG)
 
 	/* TLB-entry for OCM */
diff --git a/board/t3corp/t3corp.c b/board/t3corp/t3corp.c
index 8ffa32169..ddf58970a 100644
--- a/board/t3corp/t3corp.c
+++ b/board/t3corp/t3corp.c
@@ -45,7 +45,7 @@ int board_early_init_f(void)
 	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
 	mtdcr(UIC1ER, 0x00000000);	/* disable all */
 	mtdcr(UIC1CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC1PR, 0xffffffff);	/* per ref-board manual */
+	mtdcr(UIC1PR, 0x7fffffff);	/* per ref-board manual */
 	mtdcr(UIC1TR, 0x00000000);	/* per ref-board manual */
 	mtdcr(UIC1VR, 0x00000000);	/* int31 highest, base=0x000 */
 	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c
index fc2a6cbdb..dda2cb6ed 100644
--- a/board/tqc/tqm85xx/tqm85xx.c
+++ b/board/tqc/tqm85xx/tqm85xx.c
@@ -687,12 +687,7 @@ void ft_board_setup (void *blob, bd_t *bd)
 {
 	ft_cpu_setup (blob, bd);
 
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
-#endif
+	FT_FSL_PCI_SETUP;
 }
 #endif /* CONFIG_OF_BOARD_SETUP */
 
diff --git a/board/xes/common/fsl_8xxx_pci.c b/board/xes/common/fsl_8xxx_pci.c
index 3a8182715..ece788257 100644
--- a/board/xes/common/fsl_8xxx_pci.c
+++ b/board/xes/common/fsl_8xxx_pci.c
@@ -398,18 +398,6 @@ void pci_init_board(void)
 #if defined(CONFIG_OF_BOARD_SETUP)
 void ft_board_pci_setup(void *blob, bd_t *bd)
 {
-	/* TODO - make node name (eg pci0) dynamic */
-#ifdef CONFIG_PCI1
-	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE1
-	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
-#endif
-#ifdef CONFIG_PCIE2
-	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
-#endif
-#ifdef CONFIG_PCIE3
-	ft_fsl_pci_setup(blob, "pci0", &pcie3_hose);
-#endif
+	FT_FSL_PCI_SETUP;
 }
 #endif /* CONFIG_OF_BOARD_SETUP */
diff --git a/common/fdt_support.c b/common/fdt_support.c
index 4d87135cb..718b635d9 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -2,6 +2,8 @@
  * (C) Copyright 2007
  * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
  *
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -861,3 +863,292 @@ void fdt_del_node_and_alias(void *blob, const char *alias)
 	off = fdt_path_offset(blob, "/aliases");
 	fdt_delprop(blob, off, alias);
 }
+
+/* Helper to read a big number; size is in cells (not bytes) */
+static inline u64 of_read_number(const __be32 *cell, int size)
+{
+	u64 r = 0;
+	while (size--)
+		r = (r << 32) | be32_to_cpu(*(cell++));
+	return r;
+}
+
+static int of_n_cells(const void *blob, int nodeoffset, const char *name)
+{
+	int np;
+	const int *ip;
+
+	do {
+		np = fdt_parent_offset(blob, nodeoffset);
+
+		if (np >= 0)
+			nodeoffset = np;
+		ip = (int *)fdt_getprop(blob, nodeoffset, name, NULL);
+		if (ip)
+			return be32_to_cpup(ip);
+	} while (np >= 0);
+
+	/* No #<NAME>-cells property for the root node */
+	return 1;
+}
+
+int of_n_addr_cells(const void *blob, int nodeoffset)
+{
+	return of_n_cells(blob, nodeoffset, "#address-cells");
+}
+
+int of_n_size_cells(const void *blob, int nodeoffset)
+{
+	return of_n_cells(blob, nodeoffset, "#size-cells");
+}
+
+#define PRu64	"%llx"
+
+/* Max address size we deal with */
+#define OF_MAX_ADDR_CELLS	4
+#define OF_BAD_ADDR	((u64)-1)
+#define OF_CHECK_COUNTS(na, ns)	((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \
+			(ns) > 0)
+
+/* Debug utility */
+#ifdef DEBUG
+static void of_dump_addr(const char *s, const u32 *addr, int na)
+{
+	printf("%s", s);
+	while(na--)
+		printf(" %08x", *(addr++));
+	printf("\n");
+}
+#else
+static void of_dump_addr(const char *s, const u32 *addr, int na) { }
+#endif
+
+/* Callbacks for bus specific translators */
+struct of_bus {
+	const char	*name;
+	const char	*addresses;
+	void		(*count_cells)(void *blob, int offset,
+				int *addrc, int *sizec);
+	u64		(*map)(u32 *addr, const u32 *range,
+				int na, int ns, int pna);
+	int		(*translate)(u32 *addr, u64 offset, int na);
+};
+
+/* Default translator (generic bus) */
+static void of_bus_default_count_cells(void *blob, int offset,
+					int *addrc, int *sizec)
+{
+	if (addrc)
+		*addrc = of_n_addr_cells(blob, offset);
+	if (sizec)
+		*sizec = of_n_size_cells(blob, offset);
+}
+
+static u64 of_bus_default_map(u32 *addr, const u32 *range,
+		int na, int ns, int pna)
+{
+	u64 cp, s, da;
+
+	cp = of_read_number(range, na);
+	s  = of_read_number(range + na + pna, ns);
+	da = of_read_number(addr, na);
+
+	debug("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n",
+	    cp, s, da);
+
+	if (da < cp || da >= (cp + s))
+		return OF_BAD_ADDR;
+	return da - cp;
+}
+
+static int of_bus_default_translate(u32 *addr, u64 offset, int na)
+{
+	u64 a = of_read_number(addr, na);
+	memset(addr, 0, na * 4);
+	a += offset;
+	if (na > 1)
+		addr[na - 2] = a >> 32;
+	addr[na - 1] = a & 0xffffffffu;
+
+	return 0;
+}
+
+/* Array of bus specific translators */
+static struct of_bus of_busses[] = {
+	/* Default */
+	{
+		.name = "default",
+		.addresses = "reg",
+		.count_cells = of_bus_default_count_cells,
+		.map = of_bus_default_map,
+		.translate = of_bus_default_translate,
+	},
+};
+
+static int of_translate_one(void * blob, int parent, struct of_bus *bus,
+			    struct of_bus *pbus, u32 *addr,
+			    int na, int ns, int pna, const char *rprop)
+{
+	const u32 *ranges;
+	int rlen;
+	int rone;
+	u64 offset = OF_BAD_ADDR;
+
+	/* Normally, an absence of a "ranges" property means we are
+	 * crossing a non-translatable boundary, and thus the addresses
+	 * below the current not cannot be converted to CPU physical ones.
+	 * Unfortunately, while this is very clear in the spec, it's not
+	 * what Apple understood, and they do have things like /uni-n or
+	 * /ht nodes with no "ranges" property and a lot of perfectly
+	 * useable mapped devices below them. Thus we treat the absence of
+	 * "ranges" as equivalent to an empty "ranges" property which means
+	 * a 1:1 translation at that level. It's up to the caller not to try
+	 * to translate addresses that aren't supposed to be translated in
+	 * the first place. --BenH.
+	 */
+	ranges = (u32 *)fdt_getprop(blob, parent, rprop, &rlen);
+	if (ranges == NULL || rlen == 0) {
+		offset = of_read_number(addr, na);
+		memset(addr, 0, pna * 4);
+		debug("OF: no ranges, 1:1 translation\n");
+		goto finish;
+	}
+
+	debug("OF: walking ranges...\n");
+
+	/* Now walk through the ranges */
+	rlen /= 4;
+	rone = na + pna + ns;
+	for (; rlen >= rone; rlen -= rone, ranges += rone) {
+		offset = bus->map(addr, ranges, na, ns, pna);
+		if (offset != OF_BAD_ADDR)
+			break;
+	}
+	if (offset == OF_BAD_ADDR) {
+		debug("OF: not found !\n");
+		return 1;
+	}
+	memcpy(addr, ranges + na, 4 * pna);
+
+ finish:
+	of_dump_addr("OF: parent translation for:", addr, pna);
+	debug("OF: with offset: "PRu64"\n", offset);
+
+	/* Translate it into parent bus space */
+	return pbus->translate(addr, offset, pna);
+}
+
+/*
+ * Translate an address from the device-tree into a CPU physical address,
+ * this walks up the tree and applies the various bus mappings on the
+ * way.
+ *
+ * Note: We consider that crossing any level with #size-cells == 0 to mean
+ * that translation is impossible (that is we are not dealing with a value
+ * that can be mapped to a cpu physical address). This is not really specified
+ * that way, but this is traditionally the way IBM at least do things
+ */
+u64 __of_translate_address(void *blob, int node_offset, const u32 *in_addr,
+			   const char *rprop)
+{
+	int parent;
+	struct of_bus *bus, *pbus;
+	u32 addr[OF_MAX_ADDR_CELLS];
+	int na, ns, pna, pns;
+	u64 result = OF_BAD_ADDR;
+
+	debug("OF: ** translation for device %s **\n",
+		fdt_get_name(blob, node_offset, NULL));
+
+	/* Get parent & match bus type */
+	parent = fdt_parent_offset(blob, node_offset);
+	if (parent < 0)
+		goto bail;
+	bus = &of_busses[0];
+
+	/* Cound address cells & copy address locally */
+	bus->count_cells(blob, node_offset, &na, &ns);
+	if (!OF_CHECK_COUNTS(na, ns)) {
+		printf("%s: Bad cell count for %s\n", __FUNCTION__,
+		       fdt_get_name(blob, node_offset, NULL));
+		goto bail;
+	}
+	memcpy(addr, in_addr, na * 4);
+
+	debug("OF: bus is %s (na=%d, ns=%d) on %s\n",
+	    bus->name, na, ns, fdt_get_name(blob, parent, NULL));
+	of_dump_addr("OF: translating address:", addr, na);
+
+	/* Translate */
+	for (;;) {
+		/* Switch to parent bus */
+		node_offset = parent;
+		parent = fdt_parent_offset(blob, node_offset);
+
+		/* If root, we have finished */
+		if (parent < 0) {
+			debug("OF: reached root node\n");
+			result = of_read_number(addr, na);
+			break;
+		}
+
+		/* Get new parent bus and counts */
+		pbus = &of_busses[0];
+		pbus->count_cells(blob, node_offset, &pna, &pns);
+		if (!OF_CHECK_COUNTS(pna, pns)) {
+			printf("%s: Bad cell count for %s\n", __FUNCTION__,
+				fdt_get_name(blob, node_offset, NULL));
+			break;
+		}
+
+		debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n",
+		    pbus->name, pna, pns, fdt_get_name(blob, parent, NULL));
+
+		/* Apply bus translation */
+		if (of_translate_one(blob, node_offset, bus, pbus,
+					addr, na, ns, pna, rprop))
+			break;
+
+		/* Complete the move up one level */
+		na = pna;
+		ns = pns;
+		bus = pbus;
+
+		of_dump_addr("OF: one level translation:", addr, na);
+	}
+ bail:
+
+	return result;
+}
+
+u64 fdt_translate_address(void *blob, int node_offset, const u32 *in_addr)
+{
+	return __of_translate_address(blob, node_offset, in_addr, "ranges");
+}
+
+/**
+ * fdt_node_offset_by_compat_reg: Find a node that matches compatiable and
+ * who's reg property matches a physical cpu address
+ *
+ * @blob: ptr to device tree
+ * @compat: compatiable string to match
+ * @compat_off: property name
+ *
+ */
+int fdt_node_offset_by_compat_reg(void *blob, const char *compat,
+					phys_addr_t compat_off)
+{
+	int len, off = fdt_node_offset_by_compatible(blob, -1, compat);
+	while (off != -FDT_ERR_NOTFOUND) {
+		u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", &len);
+		if (reg) {
+			if (compat_off == fdt_translate_address(blob, off, reg))
+				return off;
+		}
+		off = fdt_node_offset_by_compatible(blob, off, compat);
+	}
+
+	return -FDT_ERR_NOTFOUND;
+}
+
+
diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c
index 628bd5964..65890769a 100644
--- a/drivers/misc/fsl_law.c
+++ b/drivers/misc/fsl_law.c
@@ -43,7 +43,8 @@ DECLARE_GLOBAL_DATA_PTR;
       defined(CONFIG_P1013) || defined(CONFIG_P1022) || \
       defined(CONFIG_P2010) || defined(CONFIG_P2020)
 #define FSL_HW_NUM_LAWS 12
-#elif defined(CONFIG_PPC_P4080)
+#elif defined(CONFIG_PPC_P3041) || defined(CONFIG_PPC_P4080) || \
+      defined(CONFIG_PPC_P5020)
 #define FSL_HW_NUM_LAWS 32
 #else
 #error FSL_HW_NUM_LAWS not defined for this platform
diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index 5a63fa216..001e6eb90 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -510,18 +510,25 @@ void fsl_pci_config_unlock(struct pci_controller *hose)
 #include <libfdt.h>
 #include <fdt_support.h>
 
-void ft_fsl_pci_setup(void *blob, const char *pci_alias,
-			struct pci_controller *hose)
+void ft_fsl_pci_setup(void *blob, const char *pci_compat,
+			struct pci_controller *hose, unsigned long ctrl_addr)
 {
-	int off = fdt_path_offset(blob, pci_alias);
+	int off;
 	u32 bus_range[2];
+	phys_addr_t p_ctrl_addr = (phys_addr_t)ctrl_addr;
+
+	/* convert ctrl_addr to true physical address */
+	p_ctrl_addr = (phys_addr_t)ctrl_addr - CONFIG_SYS_CCSRBAR;
+	p_ctrl_addr += CONFIG_SYS_CCSRBAR_PHYS;
+
+	off = fdt_node_offset_by_compat_reg(blob, pci_compat, p_ctrl_addr);
 
 	if (off < 0)
 		return;
 
 	/* We assume a cfg_addr not being set means we didn't setup the controller */
 	if ((hose == NULL) || (hose->cfg_addr == NULL)) {
-		fdt_del_node_and_alias(blob, pci_alias);
+		fdt_del_node(blob, off);
 	} else {
 		bus_range[0] = 0;
 		bus_range[1] = hose->last_busno - hose->first_busno;
diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h
index 49a86fd4c..c133033bc 100644
--- a/include/configs/ATUM8548.h
+++ b/include/configs/ATUM8548.h
@@ -91,9 +91,6 @@
 #define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
 #define PCI_SPEED		33333000        /* CPLD currenlty does not have PCI setup info */
-#define CONFIG_SYS_PCI1_ADDR	(CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCI2_ADDR	(CONFIG_SYS_CCSRBAR+0x9000)
-#define CONFIG_SYS_PCIE1_ADDR	(CONFIG_SYS_CCSRBAR+0xa000)
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR2
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index a014ad094..890a6c9bc 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -65,6 +65,7 @@
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
+#define CONFIG_SYS_HAS_SERDES		/* has SERDES */
 
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 #define CONFIG_E1000		1	/* Defind e1000 pci Ethernet card*/
@@ -125,11 +126,6 @@
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
 #endif
 
-#define CONFIG_SYS_PCI1_ADDR		(CONFIG_SYS_CCSRBAR + 0x8000)
-#define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR + 0xa000)
-#define CONFIG_SYS_PCIE2_ADDR		(CONFIG_SYS_CCSRBAR + 0x9000)
-#define CONFIG_SYS_PCIE3_ADDR		(CONFIG_SYS_CCSRBAR + 0xb000)
-
 /* DDR Setup */
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_FSL_DDR2
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index faba35311..96fd0241c 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -79,11 +79,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
 #define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
-#define CONFIG_SYS_PCI1_ADDR		(CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR+0xa000)
-#define CONFIG_SYS_PCIE2_ADDR		(CONFIG_SYS_CCSRBAR+0x9000)
-#define CONFIG_SYS_PCIE3_ADDR		(CONFIG_SYS_CCSRBAR+0xb000)
-
 /* DDR Setup */
 #define CONFIG_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index fdd3597f7..23594a74c 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -80,10 +80,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
 #define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
-#define CONFIG_SYS_PCI1_ADDR	(CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCI2_ADDR	(CONFIG_SYS_CCSRBAR+0x9000)
-#define CONFIG_SYS_PCIE1_ADDR	(CONFIG_SYS_CCSRBAR+0xa000)
-
 /* DDR Setup */
 #define CONFIG_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 0cc2d4742..bc6c5c7b4 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -75,9 +75,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
 #define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
-#define CONFIG_SYS_PCI1_ADDR           (CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCIE1_ADDR          (CONFIG_SYS_CCSRBAR+0xa000)
-
 /* DDR Setup */
 #define CONFIG_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index bb7bb47d6..92c2b49c1 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -103,9 +103,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
 #endif
 
-#define CONFIG_SYS_PCI1_ADDR           (CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCIE1_ADDR          (CONFIG_SYS_CCSRBAR+0xa000)
-
 /* DDR Setup */
 #define CONFIG_FSL_DDR3
 #undef CONFIG_FSL_DDR_INTERACTIVE
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 57c2f2f23..51e5d06db 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -89,10 +89,6 @@
 #endif
 #define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
-#define CONFIG_SYS_PCIE3_ADDR		(CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCIE2_ADDR		(CONFIG_SYS_CCSRBAR+0x9000)
-#define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR+0xa000)
-
 /* DDR Setup */
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_FSL_DDR2
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 8382e3ca8..4d9606e49 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -82,10 +82,6 @@
 #define CONFIG_SYS_CCSRBAR_PHYS_HIGH	0x0
 #define CONFIG_SYS_CCSRBAR_PHYS		CONFIG_SYS_CCSRBAR_PHYS_LOW
 
-#define CONFIG_SYS_PCI1_ADDR		(CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR+0xa000)
-#define CONFIG_SYS_PCIE2_ADDR		(CONFIG_SYS_CCSRBAR+0x9000)
-
 #define CONFIG_SYS_DIU_ADDR		(CONFIG_SYS_CCSRBAR+0x2c000)
 
 /* DDR Setup */
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 94e4d243e..0d1f7799c 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2006 Freescale Semiconductor.
+ * Copyright 2006, 2010 Freescale Semiconductor.
  *
  * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
  *
@@ -58,8 +58,8 @@
 
 #ifndef CONFIG_RIO			/* RIO/PCI are mutually exclusive */
 #define CONFIG_PCI		1	/* Enable PCI/PCIE */
-#define CONFIG_PCI1		1	/* PCIE controler 1 (ULI bridge) */
-#define CONFIG_PCI2		1	/* PCIE controler 2 (slot) */
+#define CONFIG_PCIE1		1	/* PCIE controler 1 (ULI bridge) */
+#define CONFIG_PCIE2		1	/* PCIE controler 2 (slot) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 #endif
@@ -122,9 +122,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_CCSRBAR_PHYS		CONFIG_SYS_CCSRBAR_PHYS_LOW
 #endif
 
-#define CONFIG_SYS_PCI1_ADDR		(CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCI2_ADDR		(CONFIG_SYS_CCSRBAR+0x9000)
-
 /*
  * DDR Setup
  */
@@ -328,43 +325,43 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * Addresses are mapped 1-1.
  */
 
-#define CONFIG_SYS_PCI1_MEM_VIRT	0x80000000
+#define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCI1_MEM_BUS		0xe0000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	0x0000000c00000000ULL
+#define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	0x0000000c00000000ULL
 #else
-#define CONFIG_SYS_PCI1_MEM_BUS		CONFIG_SYS_PCI1_MEM_VIRT
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_VIRT
+#define CONFIG_SYS_PCIE1_MEM_BUS	CONFIG_SYS_PCIE1_MEM_VIRT
+#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_VIRT
 #endif
-#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCI1_IO_BUS	0x00000000
-#define CONFIG_SYS_PCI1_IO_VIRT	0xffc00000
-#define CONFIG_SYS_PCI1_IO_PHYS	(CONFIG_SYS_PCI1_IO_VIRT \
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
+#define CONFIG_SYS_PCIE1_IO_VIRT	0xffc00000
+#define CONFIG_SYS_PCIE1_IO_PHYS	(CONFIG_SYS_PCIE1_IO_VIRT \
 				 | CONFIG_SYS_PHYS_ADDR_HIGH)
-#define CONFIG_SYS_PCI1_IO_SIZE	0x00010000	/* 64K */
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64K */
 
 #ifdef CONFIG_PHYS_64BIT
 /*
- * Use the same PCI bus address on PCI1 and PCI2 if we have PHYS_64BIT.
+ * Use the same PCI bus address on PCIE1 and PCIE2 if we have PHYS_64BIT.
  * This will increase the amount of PCI address space available for
  * for mapping RAM.
  */
-#define CONFIG_SYS_PCI2_MEM_BUS		CONFIG_SYS_PCI1_MEM_BUS
+#define CONFIG_SYS_PCIE2_MEM_BUS	CONFIG_SYS_PCIE1_MEM_BUS
 #else
-#define CONFIG_SYS_PCI2_MEM_BUS		(CONFIG_SYS_PCI1_MEM_BUS \
-					 + CONFIG_SYS_PCI1_MEM_SIZE)
+#define CONFIG_SYS_PCIE2_MEM_BUS	(CONFIG_SYS_PCIE1_MEM_BUS \
+					 + CONFIG_SYS_PCIE1_MEM_SIZE)
 #endif
-#define CONFIG_SYS_PCI2_MEM_VIRT 	(CONFIG_SYS_PCI1_MEM_VIRT \
-					 + CONFIG_SYS_PCI1_MEM_SIZE)
-#define CONFIG_SYS_PCI2_MEM_PHYS	(CONFIG_SYS_PCI1_MEM_PHYS \
-					 + CONFIG_SYS_PCI1_MEM_SIZE)
-#define CONFIG_SYS_PCI2_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCI2_IO_BUS	0x00000000
-#define CONFIG_SYS_PCI2_IO_VIRT (CONFIG_SYS_PCI1_IO_VIRT \
-				 + CONFIG_SYS_PCI1_IO_SIZE)
-#define CONFIG_SYS_PCI2_IO_PHYS	(CONFIG_SYS_PCI1_IO_PHYS \
-				 + CONFIG_SYS_PCI1_IO_SIZE)
-#define CONFIG_SYS_PCI2_IO_SIZE	CONFIG_SYS_PCI1_IO_SIZE
+#define CONFIG_SYS_PCIE2_MEM_VIRT 	(CONFIG_SYS_PCIE1_MEM_VIRT \
+					 + CONFIG_SYS_PCIE1_MEM_SIZE)
+#define CONFIG_SYS_PCIE2_MEM_PHYS	(CONFIG_SYS_PCIE1_MEM_PHYS \
+					 + CONFIG_SYS_PCIE1_MEM_SIZE)
+#define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
+#define CONFIG_SYS_PCIE2_IO_VIRT 	(CONFIG_SYS_PCIE1_IO_VIRT \
+					 + CONFIG_SYS_PCIE1_IO_SIZE)
+#define CONFIG_SYS_PCIE2_IO_PHYS	(CONFIG_SYS_PCIE1_IO_PHYS \
+					 + CONFIG_SYS_PCIE1_IO_SIZE)
+#define CONFIG_SYS_PCIE2_IO_SIZE	CONFIG_SYS_PCIE1_IO_SIZE
 
 #if defined(CONFIG_PCI)
 
@@ -393,10 +390,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS	1
 
 /*PCIE video card used*/
-#define VIDEO_IO_OFFSET		CONFIG_SYS_PCI2_IO_VIRT
+#define VIDEO_IO_OFFSET		CONFIG_SYS_PCIE2_IO_VIRT
 
 /*PCI video card used*/
-/*#define VIDEO_IO_OFFSET	CONFIG_SYS_PCI1_IO_VIRT*/
+/*#define VIDEO_IO_OFFSET	CONFIG_SYS_PCIE1_IO_VIRT*/
 
 /* video */
 #define CONFIG_VIDEO
@@ -409,7 +406,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_ATI_RADEON_FB
 #define CONFIG_VIDEO_LOGO
 /*#define CONFIG_CONSOLE_CURSOR*/
-#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCI2_IO_VIRT
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE2_IO_VIRT
 #endif
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
@@ -425,8 +422,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_SCSI_MAXDEVICE	CONFIG_SYS_SCSI_MAX_DEVICE
 #endif
 
-#define CONFIG_MPC86XX_PCI2
-
 #endif	/* CONFIG_PCI */
 
 #if defined(CONFIG_TSEC_ENET)
@@ -497,17 +492,17 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_IBAT1U	CONFIG_SYS_DBAT1U
 
 /* if CONFIG_PCI:
- * BAT2		PCI1 and PCI1 MEM
+ * BAT2		PCIE1 and PCIE1 MEM
  * if CONFIG_RIO
  * BAT2		Rapidio Memory
  */
 #ifdef CONFIG_PCI
-#define CONFIG_SYS_DBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_PCI1_MEM_PHYS) \
+#define CONFIG_SYS_DBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS) \
 				 | BATL_PP_RW | BATL_CACHEINHIBIT \
 				 | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_PCI1_MEM_VIRT | BATU_BL_1G \
+#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_1G \
 				 | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_PCI1_MEM_PHYS) \
+#define CONFIG_SYS_IBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS) \
 				 | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT2U	CONFIG_SYS_DBAT2U
 #else /* CONFIG_RIO */
@@ -556,14 +551,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 
 /*
- * BAT4		PCI1_IO and PCI2_IO
+ * BAT4		PCIE1_IO and PCIE2_IO
  */
-#define CONFIG_SYS_DBAT4L	(BAT_PHYS_ADDR(CONFIG_SYS_PCI1_IO_PHYS) \
+#define CONFIG_SYS_DBAT4L	(BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS) \
 				 | BATL_PP_RW | BATL_CACHEINHIBIT \
 				 | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT4U	(CONFIG_SYS_PCI1_IO_VIRT | BATU_BL_128K \
+#define CONFIG_SYS_DBAT4U	(CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_128K \
 				 | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT4L	(BAT_PHYS_ADDR(CONFIG_SYS_PCI1_IO_PHYS) \
+#define CONFIG_SYS_IBAT4L	(BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS) \
 				 | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT4U	CONFIG_SYS_DBAT4U
 
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index b42b5d09f..f9d12f55f 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -30,6 +30,7 @@
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET		/* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
+#define CONFIG_SYS_HAS_SERDES		/* has SERDES */
 
 #define CONFIG_PHYS_64BIT
 #define CONFIG_ENABLE_36BIT_PHYS
@@ -60,10 +61,6 @@
 #define CONFIG_SYS_CCSRBAR_PHYS		0xfffe00000ull
 #define CONFIG_SYS_IMMR			CONFIG_SYS_CCSRBAR
 
-#define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR + 0x9000) /* pci0 */
-#define CONFIG_SYS_PCIE2_ADDR		(CONFIG_SYS_CCSRBAR + 0xa000) /* pci1 */
-#define CONFIG_SYS_PCIE3_ADDR		(CONFIG_SYS_CCSRBAR + 0xb000) /* pci2 */
-
 /* DDR Setup */
 #define CONFIG_DDR_SPD
 #define CONFIG_VERY_BIG_RAM
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 3cebbab53..fca3cddf1 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -129,9 +129,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000      /* CCSRBAR Default */
 #endif
 
-#define CONFIG_SYS_PCIE2_ADDR		(CONFIG_SYS_CCSRBAR+0x9000)
-#define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR+0xa000)
-
 /* DDR Setup */
 #define CONFIG_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 569da4f64..bf2acbf4c 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -90,10 +90,6 @@
 #endif
 #define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
-#define CONFIG_SYS_PCIE3_ADDR		(CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCIE2_ADDR		(CONFIG_SYS_CCSRBAR+0x9000)
-#define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR+0xa000)
-
 /* DDR Setup */
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_FSL_DDR3		1
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index 90abe14f2..d8f2602e5 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -137,10 +137,6 @@
 #define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
 #define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR	*/
 
-#define CONFIG_SYS_PCI1_ADDR		(CONFIG_SYS_CCSRBAR + 0x8000)
-#define CONFIG_SYS_PCI2_ADDR		(CONFIG_SYS_CCSRBAR + 0x9000)
-#define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR + 0xa000)
-
 /*
  * DDR Setup
  */
diff --git a/include/configs/XPEDITE5170.h b/include/configs/XPEDITE5170.h
index c63fd429f..8770a8dab 100644
--- a/include/configs/XPEDITE5170.h
+++ b/include/configs/XPEDITE5170.h
@@ -97,8 +97,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
 #define CONFIG_SYS_CCSRBAR_PHYS_HIGH	0x0
 #define CONFIG_SYS_IMMR			CONFIG_SYS_CCSRBAR
-#define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR + 0x8000)
-#define CONFIG_SYS_PCIE2_ADDR		(CONFIG_SYS_CCSRBAR + 0x9000)
 
 /*
  * Diagnostics
diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h
index df5ef7848..83aeffd29 100644
--- a/include/configs/XPEDITE5200.h
+++ b/include/configs/XPEDITE5200.h
@@ -81,7 +81,6 @@
 #define CONFIG_SYS_CCSRBAR		0xef000000	/* relocated CCSRBAR */
 #define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
 #define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
-#define CONFIG_SYS_PCI1_ADDR	(CONFIG_SYS_CCSRBAR + 0x8000)
 
 /*
  * Diagnostics
diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h
index 1d6091caf..fc4a98603 100644
--- a/include/configs/XPEDITE5370.h
+++ b/include/configs/XPEDITE5370.h
@@ -99,8 +99,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_CCSRBAR		0xef000000	/* relocated CCSRBAR */
 #define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
 #define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
-#define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR + 0xa000)
-#define CONFIG_SYS_PCIE2_ADDR		(CONFIG_SYS_CCSRBAR + 0x9000)
 
 /*
  * Diagnostics
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index ac9b3c505..6fe7639e8 100644
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -77,6 +77,13 @@
 #define CONFIG_SYS_PCIE0_XCFGBASE	0xc3000000
 #define CONFIG_SYS_PCIE1_XCFGBASE	0xc3001000
 
+/*
+ * BCSR bits as defined in the Canyonlands board user manual.
+ */
+#define BCSR_USBCTRL_OTG_RST	0x32
+#define BCSR_USBCTRL_HOST_RST	0x01
+#define BCSR_SELECT_PCIE	0x10
+
 #define	CONFIG_SYS_PCIE0_UTLBASE	0xc08010000ULL	/* 36bit physical addr	*/
 
 /* base address of inbound PCIe window */
@@ -417,6 +424,7 @@
 #define CONFIG_SYS_USB_OHCI_REGS_BASE	(CONFIG_SYS_AHB_BASE | 0xd0000)
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME	"ppc440"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
+#define CONFIG_SYS_USB_OHCI_BOARD_INIT
 #endif
 
 /*
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index fb8ccae71..76e9a7626 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -202,6 +202,7 @@
  */
 #define CONFIG_CMD_CHIP_CONFIG
 #define CONFIG_CMD_DATE
+#define CONFIG_CMD_ECCTEST
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_PCI
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 3f4056e82..c8b8d0d80 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -109,10 +109,6 @@
 #define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
 #define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
-#define CONFIG_SYS_PCI1_ADDR	(CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCI2_ADDR	(CONFIG_SYS_CCSRBAR+0x9000)
-#define CONFIG_SYS_PCIE1_ADDR	(CONFIG_SYS_CCSRBAR+0xa000)
-
 /* DDR Setup */
 #define CONFIG_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index 315eebe7f..618513ab6 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -56,8 +56,8 @@
 #define CONFIG_SYS_SCRATCH_VA	0xe8000000
 
 #define CONFIG_PCI		1	/* Enable PCIE */
-#define CONFIG_PCI1		1	/* PCIE controler 1 (slot 1) */
-#define CONFIG_PCI2		1	/* PCIE controler 2 (slot 2) */
+#define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE2		1	/* PCIE controler 2 (slot 2) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
@@ -108,9 +108,6 @@
 #define CONFIG_SYS_CCSRBAR_PHYS_HIGH	0x0
 #define CONFIG_SYS_CCSRBAR_PHYS		CONFIG_SYS_CCSRBAR_PHYS_LOW
 
-#define CONFIG_SYS_PCI1_ADDR		(CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCI2_ADDR		(CONFIG_SYS_CCSRBAR+0x9000)
-
 /*
  * DDR Setup
  */
@@ -307,23 +304,23 @@
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CONFIG_SYS_PCI1_MEM_BUS		0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BUS
-#define CONFIG_SYS_PCI1_MEM_VIRT	CONFIG_SYS_PCI1_MEM_BUS
-#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCI1_IO_BUS	0xe2000000
-#define CONFIG_SYS_PCI1_IO_PHYS	CONFIG_SYS_PCI1_IO_BUS
-#define CONFIG_SYS_PCI1_IO_VIRT	CONFIG_SYS_PCI1_IO_BUS
-#define CONFIG_SYS_PCI1_IO_SIZE	0x1000000	/* 16M */
+#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BUS
+#define CONFIG_SYS_PCIE1_MEM_VIRT	CONFIG_SYS_PCIE1_MEM_BUS
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE1_IO_BUS		0xe2000000
+#define CONFIG_SYS_PCIE1_IO_PHYS	CONFIG_SYS_PCIE1_IO_BUS
+#define CONFIG_SYS_PCIE1_IO_VIRT	CONFIG_SYS_PCIE1_IO_BUS
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x1000000	/* 16M */
 
-#define CONFIG_SYS_PCI2_MEM_BUS	0xa0000000
-#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BUS
-#define CONFIG_SYS_PCI2_MEM_VIRT	CONFIG_SYS_PCI2_MEM_BUS
-#define CONFIG_SYS_PCI2_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI2_IO_BUS	0xe3000000
-#define CONFIG_SYS_PCI2_IO_PHYS	CONFIG_SYS_PCI2_IO_BUS
-#define CONFIG_SYS_PCI2_IO_VIRT	CONFIG_SYS_PCI2_IO_BUS
-#define CONFIG_SYS_PCI2_IO_SIZE	0x1000000	/* 16M */
+#define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS	CONFIG_SYS_PCIE2_MEM_BUS
+#define CONFIG_SYS_PCIE2_MEM_VIRT	CONFIG_SYS_PCIE2_MEM_BUS
+#define CONFIG_SYS_PCIE2_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCIE2_IO_BUS		0xe3000000
+#define CONFIG_SYS_PCIE2_IO_PHYS	CONFIG_SYS_PCIE2_IO_BUS
+#define CONFIG_SYS_PCIE2_IO_VIRT	CONFIG_SYS_PCIE2_IO_BUS
+#define CONFIG_SYS_PCIE2_IO_SIZE	0x1000000	/* 16M */
 
 #if defined(CONFIG_PCI)
 
@@ -409,10 +406,10 @@
  * 0xa000_0000  512M   PCI-Express 2 Memory
  *	Changed it for operating from 0xd0000000
  */
-#define CONFIG_SYS_DBAT1L	( CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW \
+#define CONFIG_SYS_DBAT1L	( CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW \
 			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT1U	(CONFIG_SYS_PCI1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_DBAT1U	(CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT1U	CONFIG_SYS_DBAT1U
 
 /*
@@ -452,10 +449,10 @@
  * 0xe300_0000  16M    PCI-Express 2 I/0
  *    Note that this is at 0xe0000000
  */
-#define CONFIG_SYS_DBAT4L	( CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW \
+#define CONFIG_SYS_DBAT4L	( CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW \
 			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT4U	(CONFIG_SYS_PCI1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_DBAT4U	(CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT4U	CONFIG_SYS_DBAT4U
 
 /*
diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h
index 0ecc5b10d..b38886b53 100644
--- a/include/configs/t3corp.h
+++ b/include/configs/t3corp.h
@@ -74,8 +74,8 @@
 #define CONFIG_SYS_FLASH_SIZE		(64 << 20)
 
 #define CONFIG_SYS_FPGA1_BASE		0xe0000000
-#define CONFIG_SYS_FPGA2_BASE		0xe0100000
-#define CONFIG_SYS_FPGA3_BASE		0xe0200000
+#define CONFIG_SYS_FPGA2_BASE		0xe2000000
+#define CONFIG_SYS_FPGA3_BASE		0xe4000000
 
 #define CONFIG_SYS_BOOT_BASE_ADDR	0xFF000000	/* EBC Boot Space */
 #define CONFIG_SYS_FLASH_BASE_PHYS_H	0x4
@@ -84,14 +84,12 @@
 	(((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) \
 	| (u64)CONFIG_SYS_FLASH_BASE_PHYS_L)
 
-#define CONFIG_SYS_OCM_BASE		0xE3000000	/* OCM: 64k */
+#define CONFIG_SYS_OCM_BASE		0xE7000000	/* OCM: 64k */
 #define CONFIG_SYS_SRAM_BASE		0xE8000000	/* SRAM: 256k */
 #define CONFIG_SYS_LOCAL_CONF_REGS	0xEF000000
 
 #define CONFIG_SYS_PERIPHERAL_BASE	0xEF600000	/* internal periph. */
 
-#define CONFIG_SYS_AHB_BASE		0xE2000000	/* int. AHB periph. */
-
 /*
  * Initial RAM & stack pointer (placed in OCM)
  */
@@ -121,6 +119,7 @@
 #define CONFIG_SYS_FLASH_CFI		/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
 #define CONFIG_SYS_FLASH_CFI_AMD_RESET	1	/* Use AMD reset cmd */
+#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* use status poll method	*/
 
 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks */
@@ -144,10 +143,13 @@
 /*
  * DDR2 SDRAM
  */
+#define CONFIG_SYS_MBYTES_SDRAM		256
+#define CONFIG_DDR_ECC
 #define CONFIG_AUTOCALIB	"silent\0"	/* default is non-verbose    */
 #define CONFIG_PPC4xx_DDR_AUTOCALIBRATION	/* IBM DDR autocalibration   */
 #define DEBUG_PPC4xx_DDR_AUTOCALIBRATION	/* dynamic DDR autocal debug */
 #undef CONFIG_PPC4xx_DDR_METHOD_A
+#define CONFIG_DDR_RFDC_FIXED		0x000001D7 /* optimal value */
 
 /* DDR1/2 SDRAM Device Control Register Data Values */
 /* Memory Queue */
@@ -162,9 +164,6 @@
 #define CONFIG_SYS_SDRAM_CONF1HB	0x80001C80
 #define CONFIG_SYS_SDRAM_CONFPATHB	0x10a68000
 
-#define CONFIG_DDR_ECC
-#define CONFIG_SYS_MBYTES_SDRAM		256
-
 #define CAS_LATENCY			JEDEC_MA_MR_CL_DDR2_5_0_CLK
 
 /* DDR1/2 SDRAM Device Control Register Data Values */
@@ -360,6 +359,7 @@
  * Commands additional to the ones defined in amcc-common.h
  */
 #define CONFIG_CMD_CHIP_CONFIG
+#define CONFIG_CMD_ECCTEST
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_SDRAM
 
@@ -417,7 +417,7 @@
 #define CONFIG_SYS_EBC_PB1AP	(EBC_BXAP_BME_DISABLED		|	\
 				 EBC_BXAP_TWT_ENCODE(5)		|	\
 				 EBC_BXAP_CSN_ENCODE(0)		|	\
-				 EBC_BXAP_OEN_ENCODE(4)		|	\
+				 EBC_BXAP_OEN_ENCODE(3)		|	\
 				 EBC_BXAP_WBN_ENCODE(0)		|	\
 				 EBC_BXAP_WBF_ENCODE(0)		|	\
 				 EBC_BXAP_TH_ENCODE(1)		|	\
@@ -426,7 +426,7 @@
 				 EBC_BXAP_BEM_RW		|	\
 				 EBC_BXAP_PEN_DISABLED)
 #define CONFIG_SYS_EBC_PB1CR	(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA1_BASE) | \
-				 EBC_BXCR_BS_1MB		|	\
+				 EBC_BXCR_BS_32MB		|	\
 				 EBC_BXCR_BU_RW			|	\
 				 EBC_BXCR_BW_32BIT)
 
@@ -434,7 +434,7 @@
 #define CONFIG_SYS_EBC_PB2AP	(EBC_BXAP_BME_DISABLED		|	\
 				 EBC_BXAP_TWT_ENCODE(5)		|	\
 				 EBC_BXAP_CSN_ENCODE(0)		|	\
-				 EBC_BXAP_OEN_ENCODE(4)		|	\
+				 EBC_BXAP_OEN_ENCODE(3)		|	\
 				 EBC_BXAP_WBN_ENCODE(0)		|	\
 				 EBC_BXAP_WBF_ENCODE(0)		|	\
 				 EBC_BXAP_TH_ENCODE(1)		|	\
@@ -443,7 +443,7 @@
 				 EBC_BXAP_BEM_RW		|	\
 				 EBC_BXAP_PEN_DISABLED)
 #define CONFIG_SYS_EBC_PB2CR	(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA2_BASE) | \
-				 EBC_BXCR_BS_1MB		|	\
+				 EBC_BXCR_BS_16MB		|	\
 				 EBC_BXCR_BU_RW			|	\
 				 EBC_BXCR_BW_32BIT)
 
@@ -451,7 +451,7 @@
 #define CONFIG_SYS_EBC_PB3AP	(EBC_BXAP_BME_DISABLED		|	\
 				 EBC_BXAP_TWT_ENCODE(5)		|	\
 				 EBC_BXAP_CSN_ENCODE(0)		|	\
-				 EBC_BXAP_OEN_ENCODE(4)		|	\
+				 EBC_BXAP_OEN_ENCODE(3)		|	\
 				 EBC_BXAP_WBN_ENCODE(0)		|	\
 				 EBC_BXAP_WBF_ENCODE(0)		|	\
 				 EBC_BXAP_TH_ENCODE(1)		|	\
@@ -460,7 +460,7 @@
 				 EBC_BXAP_BEM_RW		|	\
 				 EBC_BXAP_PEN_DISABLED)
 #define CONFIG_SYS_EBC_PB3CR	(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA3_BASE) | \
-				 EBC_BXCR_BS_1MB		|	\
+				 EBC_BXCR_BS_16MB		|	\
 				 EBC_BXCR_BU_RW			|	\
 				 EBC_BXCR_BW_32BIT)
 
diff --git a/include/fdt_support.h b/include/fdt_support.h
index fc16159eb..54af9fe71 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -83,6 +83,9 @@ int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size);
 
 void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size);
 void fdt_del_node_and_alias(void *blob, const char *alias);
+u64 fdt_translate_address(void *blob, int node_offset, const u32 *in_addr);
+int fdt_node_offset_by_compat_reg(void *blob, const char *compat,
+					phys_addr_t compat_off);
 
 #endif /* ifdef CONFIG_OF_LIBFDT */
 #endif /* ifndef __FDT_SUPPORT_H */