ARM: remove broken "armadillo" board

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Rowel Atienza <rowel@diwalabs.com>

10 files changed, 1 insertions, 725 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 74191ad6a..a37ef4283 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -564,10 +564,6 @@ Albert ARIBAUD <albert.u.boot@aribaud.net>
 
 	edminiv2	ARM926EJS (Orion5x SoC)
 
-Rowel Atienza <rowel@diwalabs.com>
-
-	armadillo	ARM720T
-
 Stefano Babic <sbabic@denx.de>
 
 	ea20		davinci
diff --git a/MAKEALL b/MAKEALL
index 26685fbfc..63be39115 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -301,7 +301,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
 #########################################################################
 
 LIST_ARM7="		\
-	armadillo	\
 	B2		\
 	ep7312		\
 	evb4510		\
diff --git a/board/armadillo/Makefile b/board/armadillo/Makefile
deleted file mode 100644
index 3b524524f..000000000
--- a/board/armadillo/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2002
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	:= armadillo.o flash.o
-SOBJS	:= lowlevel_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/armadillo/armadillo.c b/board/armadillo/armadillo.c
deleted file mode 100644
index a825144c5..000000000
--- a/board/armadillo/armadillo.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
- * Armadillo board HT1070
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <clps7111.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	/* Activate LED flasher */
-	IO_LEDFLSH = 0x40;
-
-	/* arch number MACH_TYPE_ARMADILLO - not official*/
-	gd->bd->bi_arch_number = 83;
-
-	/* location of boot parameters */
-	gd->bd->bi_boot_params = 0xc0000100;
-
-	return 0;
-}
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_CS8900
-	rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
-	return rc;
-}
-#endif
diff --git a/board/armadillo/config.mk b/board/armadillo/config.mk
deleted file mode 100644
index ecb8b745c..000000000
--- a/board/armadillo/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#address where u-boot will be relocated
-CONFIG_SYS_TEXT_BASE = 0xc0f80000
diff --git a/board/armadillo/flash.c b/board/armadillo/flash.c
deleted file mode 100644
index cf7d7f6a6..000000000
--- a/board/armadillo/flash.c
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
- * Flash driver for armadillo board HT1070
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#define FLASH_BANK_SIZE 0x400000
-
-/*value used by hermit is 0x200*/
-/*document says sector size is either 64k in low mem reg and 8k in high mem reg*/
-#define MAIN_SECT_SIZE  0x10000
-
-#define UNALIGNED_MASK (3)
-#define FL_WORD(addr) (*(volatile unsigned short*)(addr))
-#define FLASH_TIMEOUT 20000000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
-	int i, j;
-	ulong size = 0;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		ulong flashbase = 0;
-
-		flash_info[i].flash_id = (FUJ_MANUFACT & FLASH_VENDMASK);
-		/*(INTEL_ID_28F128J3 & FLASH_TYPEMASK); */
-		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-		if (i == 0)
-			flashbase = PHYS_FLASH_1;
-		else
-			panic ("configured too many flash banks!\n");
-		for (j = 0; j < flash_info[i].sector_count; j++) {
-			flash_info[i].start[j] =
-				flashbase + j * MAIN_SECT_SIZE;
-		}
-		size += flash_info[i].size;
-	}
-
-	/* Protect monitor and environment sectors
-	 */
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_SYS_FLASH_BASE,
-		       CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
-		       &flash_info[0]);
-
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_ENV_ADDR,
-		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
-	return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case (FUJ_MANUFACT & FLASH_VENDMASK):
-		printf ("Fujitsu: ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-/*
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
-		printf ("28F128J3 (128Mbit)\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		goto Done;
-		break;
-	}
-*/
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; i++) {
-		if ((i % 5) == 0) {
-			printf ("\n   ");
-		}
-		printf (" %08lX%s", info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-
-/*
-Done:	;
-*/
-}
-
-/*
- *  * Loop until both write state machines complete.
- *   */
-static unsigned short flash_status_wait (unsigned long addr,
-					 unsigned short value)
-{
-	unsigned short status;
-	long timeout = FLASH_TIMEOUT;
-
-	while (((status = (FL_WORD (addr))) != value) && timeout > 0) {
-		timeout--;
-	}
-	return status;
-}
-
-/*
- * Loop until the Write State machine is ready, then do a full error
- * check.  Clear status and leave the flash in Read Array mode; return
- * 0 for no error, -1 for error.
- */
-static int flash_status_full_check (unsigned long addr, unsigned short value1,
-				    unsigned short value2)
-{
-	unsigned short status1, status2;
-
-	status1 = flash_status_wait (addr, value1);
-	status2 = flash_status_wait (addr + 2, value2);
-	return (status1 != value1 || status2 != value2) ? -1 : 0;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	int rc = ERR_OK;
-	unsigned long base;
-	unsigned long addr;
-	ulong start;
-
-	if ((info->flash_id & FLASH_VENDMASK) !=
-	    (FUJ_MANUFACT & FLASH_VENDMASK)) {
-		return ERR_UNKNOWN_FLASH_VENDOR;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-	if (prot)
-		return ERR_PROTECTED;
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-	flag = disable_interrupts ();
-
-	printf ("Erasing %d sectors starting at sector %2d.\n"
-		"This make take some time ... ",
-		s_last - s_first, sect);
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-		/* ARM simple, non interrupt dependent timer */
-		start = get_timer(0);
-
-		if (info->protect[sect] == 0) {	/* not protected */
-
-			addr = sect * MAIN_SECT_SIZE;
-			addr &= ~(unsigned long) UNALIGNED_MASK;	/* word align */
-			base = addr & 0xF0000000;
-
-			FL_WORD (base + (0x555 << 1)) = 0xAA;
-			FL_WORD (base + (0x2AA << 1)) = 0x55;
-			FL_WORD (base + (0x555 << 1)) = 0x80;
-			FL_WORD (base + (0x555 << 1)) = 0xAA;
-			FL_WORD (base + (0x2AA << 1)) = 0x55;
-			FL_WORD (addr) = 0x30;
-			if (flash_status_full_check (addr, 0xFFFF, 0xFFFF))
-				return ERR_PROTECTED;
-		}
-	}
-	printf ("\nDone.\n");
-	if (ctrlc ())
-		printf ("User Interrupt!\n");
-
-	/* allow flash to settle - wait 10 ms */
-	udelay_masked (10000);
-
-	if (flag)
-		enable_interrupts ();
-
-	return rc;
-}
-
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t * info, ulong dest, ushort data)
-{
-	int flag;
-	unsigned long base;
-	ulong start;
-
-	/* Check if Flash is (sufficiently) erased
-	 */
-	if ((FL_WORD (dest) & data) != data)
-		return ERR_NOT_ERASED;
-
-	/*if(dest & UNALIGNED_MASK) return ERR_ALIGN; */
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-	flag = disable_interrupts ();
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	base = dest & 0xF0000000;
-	FL_WORD (base + (0x555 << 1)) = 0xAA;
-	FL_WORD (base + (0x2AA << 1)) = 0x55;
-	FL_WORD (base + (0x555 << 1)) = 0xA0;
-	FL_WORD (dest) = data;
-	/*printf("writing 0x%p = 0x%x\n",dest,data); */
-	if (flash_status_wait (dest, data) != data)
-		return ERR_PROG_ERROR;
-
-	if (flag)
-		enable_interrupts ();
-
-	return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	ushort data;
-	int l;
-	int i, rc;
-
-	wp = (addr & ~1);	/* get lower word aligned address */
-	printf ("Writing %lu short data to 0x%lx from 0x%p.\n ", cnt, wp, src);
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *) cp << 8);
-		}
-		for (; i < 2 && cnt > 0; ++i) {
-			data = (data >> 8) | (*src++ << 8);
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < 2; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *) cp << 8);
-		}
-
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 2;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 2) {
-		data = *((vu_short *) src);
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		src += 2;
-		wp += 2;
-		cnt -= 2;
-	}
-
-	if (cnt == 0) {
-		printf ("\nDone.\n");
-		return ERR_OK;
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
-		data = (data >> 8) | (*src++ << 8);
-		--cnt;
-	}
-	for (; i < 2; ++i, ++cp) {
-		data = (data >> 8) | (*(uchar *) cp << 8);
-	}
-
-	return write_word (info, wp, data);
-}
diff --git a/board/armadillo/lowlevel_init.S b/board/armadillo/lowlevel_init.S
deleted file mode 100644
index e7d373d27..000000000
--- a/board/armadillo/lowlevel_init.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Initialization stuff - taken from hermit
- * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
- * Armadillo board HT1070
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/* some parameters for the board */
-/* setting up the memory */
-#define	SRAM_START	0x60000000
-#define	SRAM_SIZE	0x0000c000
-
-.globl lowlevel_init
-lowlevel_init:
-	mov	r0, #0x70		/* 32-bit code + data, MMU mandatory */
-	mcr	p15, 0, r0, c1, c0, 0	/* MMU init */
-
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
-	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
-
-	mov	r0, #0x80000000		/* I/O base */
-
-	mov	r1, #0x6		/* CLKCTL_73 in SYSCON3 */
-	add	r2, r0, #0x2200		/* address of SYSCON3 in r2 */
-	str	r1, [r2]		/* set clock speed to 73.728 MHz */
-
-	mov	r1, #0x81		/* 64KHz DRAM refresh period */
-	str	r1, [r0, #0x200]	/* set DRFPR */
-
-	mov	r1, #0x500		/* permanent enable, 16bits wide */
-	add	r1, r1, #0x42		/* 128Mbit, CAS lat = 2 SDRAM */
-	add	r2, r0, #0x2300		/* load address in r2 */
-	str	r1, [r2]
-
-	mov	r1, #0x100		/* SDRAM refresh rate */
-	add	r2, r0, #0x2340		/* load address in r2 */
-	str	r1, [r2]
-
-	mov	sp, #SRAM_START		/* init stack pointer */
-	add	sp, sp, #SRAM_SIZE
-
-	/* everything is fine now */
-	mov	pc, lr
diff --git a/boards.cfg b/boards.cfg
index 3ab059f5e..65205a845 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -42,7 +42,6 @@ imx31_litekit                arm         arm1136     -                   logicpd
 mx35pdk                      arm         arm1136     -                   freescale      mx35
 omap2420h4                   arm         arm1136     -                   ti             omap24xx
 tnetv107x_evm                arm         arm1176     tnetv107xevm        ti             tnetv107x
-armadillo                    arm         arm720t
 ep7312                       arm         arm720t
 impa7                        arm         arm720t
 modnet50                     arm         arm720t
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index e2b2596ae..7c07c2b83 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
 
 Board	Arch	CPU	removed	    Commit	last known maintainer/contact
 =============================================================================
+armadillo arm	arm720t	-	  2011-07-16	Rowel Atienza <rowel@diwalabs.com>
 assabet	arm	sa1100	-	  2011-07-16	George G. Davis <gdavis@mvista.com>
 trab	arm	S3C2400	-	  2011-05-01	Gary Jennejohn <garyj@denx.de>
 xsengine ARM	PXA2xx	4262a7c   2010-10-20
diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h
deleted file mode 100644
index d0d0998d6..000000000
--- a/include/configs/armadillo.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * (C) Copyright 2000
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Configuation settings for the EP7312 board.
- *
- * Modified to work on Armadillo HT1070 ARM720T board
- * (C) Copyright 2005 Rowel Atienza rowel@diwalabs.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * If we are developing, we might want to start armboot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#undef  CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM7		1	/* This is a ARM7 CPU	*/
-#define CONFIG_ARMADILLO	1	/* on an Armadillo Board      */
-#define CONFIG_ARM_THUMB	1	/* this is an ARM720TDMI */
-#undef  CONFIG_ARM7_REVD		/* disable ARM720 REV.D Workarounds */
-
-#undef CONFIG_USE_IRQ			/* don't need them anymore */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900		/* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE	0x20000300 /* armadillo board */
-#define CONFIG_CS8900_BUS16
-#undef  CONFIG_CS8900_BUS32
-
-/*
- * select serial console configuration
- */
-#define CONFIG_CLPS7111_SERIAL
-#define CONFIG_SERIAL1		1	/* we use Serial line 1 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE		115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-#define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOTARGS		"root=/dev/ram0 rootfstype=ext2 console=ttyAM0,115200"
-
-#define CONFIG_BOOTCOMMAND	"bootm 40000 180000"
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#define	CONFIG_SYS_PROMPT		"ARMADILLO # "	/* Monitor Command Prompt	*/
-#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0xc0400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x00040000	/* default load address	for armadillo: kernel img is here*/
-
-#define	CONFIG_SYS_HZ			2000		/* decrementer freq: 2 kHz */
-
-						/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1		0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x02000000 /* 32 MB armadillo SDRAM */
-
-#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE		0x00400000 /* 4 MB */
-
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x20000)	/* Addr of Environment Sector	*/
-#define CONFIG_ENV_SIZE		0x20000	/* Total Size of Environment Sector	*/
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#endif	/* __CONFIG_H */