* Patch by Ron Alder, 11 July 2005

    Add Xianghua Xiao and Lunsheng Wang's support for the
    GDA MPC8540 EVAL board.

12 files changed, 1969 insertions, 25 deletions

diff --git a/CHANGELOG b/CHANGELOG
index acd36fa1b..e82789577 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,6 +1,10 @@
 ======================================================================
 Changes for U-Boot 1.1.3:
 ======================================================================
+* Patch by Ron Alder, 11 July 2005
+    Add Xianghua Xiao and Lunsheng Wang's support for the
+    GDA MPC8540 EVAL board.
+
 * Patch by Eran Liberty
   Add support for the Freescale MPC8349ADS board.
 
diff --git a/MAKEALL b/MAKEALL
index c96f52c47..2a70320bd 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -121,9 +121,9 @@ LIST_83xx="	\
 
 LIST_85xx="	\
 
-	MPC8540ADS	MPC8541CDS	MPC8548CDS	MPC8555CDS	\
-	MPC8560ADS	PM854		sbc8540		sbc8560		\
-	stxgp3		TQM8540						\
+	MPC8540ADS	MPC8540EVAL	MPC8541CDS	MPC8548CDS	\
+	MPC8555CDS	MPC8560ADS	PM854		sbc8540		\
+	sbc8560		stxgp3		TQM8540				\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index 56478a21b..90a622839 100644
--- a/Makefile
+++ b/Makefile
@@ -1197,6 +1197,26 @@ MPC8349ADS_config:	unconfig
 MPC8540ADS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads
 
+MPC8540EVAL_config \
+MPC8540EVAL_33_config \
+MPC8540EVAL_66_config \
+MPC8540EVAL_33_slave_config \
+MPC8540EVAL_66_slave_config:      unconfig
+	@echo "" >include/config.h ; \
+	if [ "$(findstring _33_,$@)" ] ; then \
+		echo -n "... 33 MHz PCI" ; \
+	else \
+		echo "#define CONFIG_SYSCLK_66M" >>include/config.h ; \
+		echo -n "... 66 MHz PCI" ; \
+	fi ; \
+	if [ "$(findstring _slave_,$@)" ] ; then \
+		echo "#define CONFIG_PCI_SLAVE" >>include/config.h ; \
+		echo " slave" ; \
+	else \
+		echo " host" ; \
+	fi
+	@./mkconfig -a MPC8540EVAL ppc mpc85xx mpc8540eval
+
 MPC8560ADS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads
 
diff --git a/README b/README
index c52ccbd9d..b20ede47d 100644
--- a/README
+++ b/README
@@ -287,17 +287,17 @@ The following options need to be configured:
 		CONFIG_EBONY		CONFIG_MOUSSE		CONFIG_SXNI855T
 		CONFIG_ELPPC		CONFIG_MPC8260ADS	CONFIG_TQM823L
 		CONFIG_ELPT860		CONFIG_MPC8540ADS	CONFIG_TQM8260
-		CONFIG_ep8260		CONFIG_MPC8560ADS	CONFIG_TQM850L
-		CONFIG_ERIC		CONFIG_MUSENKI		CONFIG_TQM855L
-		CONFIG_ESTEEM192E	CONFIG_MVS1		CONFIG_TQM860L
-		CONFIG_ETX094		CONFIG_NETPHONE		CONFIG_TTTech
-		CONFIG_EVB64260		CONFIG_NETTA		CONFIG_UTX8245
-		CONFIG_FADS823		CONFIG_NETVIA		CONFIG_V37
-		CONFIG_FADS850SAR	CONFIG_NX823		CONFIG_W7OLMC
-		CONFIG_FADS860T		CONFIG_OCRTC		CONFIG_W7OLMG
-		CONFIG_FLAGADM		CONFIG_ORSG		CONFIG_WALNUT405
-		CONFIG_FPS850L		CONFIG_OXC		CONFIG_ZPC1900
-		CONFIG_FPS860L					CONFIG_ZUMA
+		CONFIG_ep8260		CONFIG_MPC8540EVAL	CONFIG_TQM850L
+		CONFIG_ERIC		CONFIG_MPC8560ADS	CONFIG_TQM855L
+		CONFIG_ESTEEM192E	CONFIG_MUSENKI		CONFIG_TQM860L
+		CONFIG_ETX094		CONFIG_MVS1		CONFIG_TTTech
+		CONFIG_EVB64260		CONFIG_NETPHONE		CONFIG_UTX8245
+		CONFIG_FADS823		CONFIG_NETTA		CONFIG_V37
+		CONFIG_FADS850SAR	CONFIG_NETVIA		CONFIG_W7OLMC
+		CONFIG_FADS860T		CONFIG_NX823		CONFIG_W7OLMG
+		CONFIG_FLAGADM		CONFIG_OCRTC		CONFIG_WALNUT405
+		CONFIG_FPS850L		CONFIG_ORSG		CONFIG_ZPC1900
+		CONFIG_FPS860L		CONFIG_OXC		CONFIG_ZUMA
 
 		ARM based boards:
 		-----------------
@@ -2186,14 +2186,14 @@ configurations; the following names are supported:
 	DUET_ADS_config		MBX_config		sbc8560_66_config
 	EBONY_config		MPC8260ADS_config	SM850_config
 	ELPT860_config		MPC8540ADS_config	SPD823TS_config
-	ESTEEM192E_config	MPC8560ADS_config	stxgp3_config
-	ETX094_config		NETVIA_config		SXNI855T_config
-	FADS823_config		omap1510inn_config	TQM823L_config
-	FADS850SAR_config	omap1610h2_config	TQM850L_config
-	FADS860T_config		omap1610inn_config	TQM855L_config
-	FPS850L_config		omap5912osk_config	TQM860L_config
-				omap2420h4_config	WALNUT405_config
-							Yukon8220_config
+	ESTEEM192E_config	MPC8540EVAL_config	stxgp3_config
+	ETX094_config		MPC8560ADS_config	SXNI855T_config
+	FADS823_config		NETVIA_config		TQM823L_config
+	FADS850SAR_config	omap1510inn_config	TQM850L_config
+	FADS860T_config		omap1610h2_config	TQM855L_config
+	FPS850L_config		omap1610inn_config	TQM860L_config
+				omap5912osk_config	WALNUT405_config
+				omap2420h4_config	Yukon8220_config
 							ZPC1900_config
 
 Note: for some board special configuration names may exist; check if
diff --git a/board/mpc8540eval/Makefile b/board/mpc8540eval/Makefile
new file mode 100644
index 000000000..6f1995e08
--- /dev/null
+++ b/board/mpc8540eval/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= $(BOARD).o flash.o
+#OBJS	:= $(BOARD).o flash.o $(BOARD)_slave.o
+SOBJS	:= init.o
+#SOBJS	:=
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/mpc8540eval/config.mk b/board/mpc8540eval/config.mk
new file mode 100644
index 000000000..68271bd70
--- /dev/null
+++ b/board/mpc8540eval/config.mk
@@ -0,0 +1,34 @@
+# Modified by Xianghua Xiao, X.Xiao@motorola.com
+# (C) Copyright 2002,Motorola Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# gda8540 board
+# default CCARBAR is at 0xff700000
+# assume U-Boot is less than 0.5MB
+#
+#TEXT_BASE = 0x1000000
+TEXT_BASE = 0xfff80000
+
+
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8540=1
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
diff --git a/board/mpc8540eval/flash.c b/board/mpc8540eval/flash.c
new file mode 100644
index 000000000..7300a041a
--- /dev/null
+++ b/board/mpc8540eval/flash.c
@@ -0,0 +1,892 @@
+/*
+ * (C) Copyright 2003 Motorola Inc.
+ *  Xianghua Xiao,(X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2000, 2001
+ *  Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
+ * Add support the Sharp chips on the mpc8260ads.
+ * I started with board/ip860/flash.c and made changes I found in
+ * the MTD project by David Schleef.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if !defined(CFG_NO_FLASH)
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef  CFG_ENV_ADDR
+#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef  CFG_ENV_SIZE
+#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# endif
+# ifndef  CFG_ENV_SECT_SIZE
+#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# endif
+#endif
+
+/*
+ * The variable should be in the flash info structure. Since it
+ * is only used in this board specific file it is declared here.
+ * In the future I think an endian flag should be part of the
+ * flash_info_t structure. (Ron Alder)
+ */
+static ulong big_endian = 0;
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_block (flash_info_t *info, uchar * src, ulong dest, ulong cnt);
+static int write_short (flash_info_t *info, ulong dest, ushort data);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static int clear_block_lock_bit(flash_info_t *info, vu_long * addr);
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size;
+	int i;
+
+	/* Init: enable write,
+	 * or we cannot even write flash commands
+	 */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+
+		/* set the default sector offset */
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size, size<<20);
+	}
+
+	/* Re-do sizing to get full correct info */
+	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+	flash_info[0].size = size;
+
+#if !defined(CONFIG_RAM_AS_FLASH)
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+	/* monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_MONITOR_BASE,
+		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      &flash_info[0]);
+#endif
+
+#ifdef	CFG_ENV_IS_IN_FLASH
+	/* ENV protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_ENV_ADDR,
+		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      &flash_info[0]);
+#endif
+#endif
+	return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_INTEL:	printf ("Intel ");		break;
+	case FLASH_MAN_SHARP:   printf ("Sharp ");		break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F016SV:	printf ("28F016SV (16 Mbit, 32 x 64k)\n");
+				break;
+	case FLASH_28F160S3:	printf ("28F160S3 (16 Mbit, 32 x 512K)\n");
+				break;
+	case FLASH_28F320S3:	printf ("28F320S3 (32 Mbit, 64 x 512K)\n");
+				break;
+	case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n");
+				break;
+	case FLASH_28F640J3A:   printf ("28F640J3A (64 Mbit, 64 x 128K)\n");
+				break;
+	default:		printf ("Unknown Chip Type\n");
+				break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     "
+		);
+	}
+	printf ("\n");
+}
+
+ /* only deal with 16 bit and 32 bit port width, 16bit chip */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+	short i;
+	ulong value,va,vb,vc,vd;
+	ulong base = (ulong)addr;
+	ulong sector_offset;
+
+#ifdef DEBUG
+	printf("Check flash at 0x%08x\n",(uint)addr);
+#endif
+	/* Write "Intelligent Identifier" command: read Manufacturer ID */
+	*addr = 0x90909090;
+	udelay(20);
+	asm("sync");
+
+#ifndef CFG_FLASH_CFI
+	printf("Not define CFG_FLASH_CFI\n");
+	return (0);
+#else
+	value = addr[0];
+	va=(value & 0xFF000000)>>24;
+	vb=(value & 0x00FF0000)>>16;
+	vc=(value & 0x0000FF00)>>8;
+	vd=(value & 0x000000FF);
+	if ((va==0) && (vb==0)) {
+		printf("cannot identify Flash\n");
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);			/* no or unknown flash	*/
+	}
+	else if ((va==0) && (vb!=0)) {
+		big_endian = 1;
+		info->chipwidth = FLASH_CFI_BY16;
+		if(vb == vd) info->portwidth = FLASH_CFI_32BIT;
+		else info->portwidth = FLASH_CFI_16BIT;
+	}
+	else if ((va!=0) && (vb==0)) {
+		big_endian = 0;
+		info->chipwidth = FLASH_CFI_BY16;
+		if(va == vc) info->portwidth = FLASH_CFI_32BIT;
+		else info->portwidth = FLASH_CFI_16BIT;
+	}
+	else if ((va!=0) && (vb!=0)) {
+		big_endian = 1;		/* no meaning for 8bit chip */
+		info->chipwidth = FLASH_CFI_BY8;
+		if(va == vb) info->portwidth = FLASH_CFI_16BIT;
+		else info->portwidth = FLASH_CFI_8BIT;
+	}
+#ifdef DEBUG
+	switch (info->portwidth) {
+		case FLASH_CFI_8BIT:
+			printf("port width is 8 bit.\n");
+			break;
+		case FLASH_CFI_16BIT:
+			printf("port width is 16 bit, ");
+			break;
+		case FLASH_CFI_32BIT:
+			printf("port width is 32 bit, ");
+			break;
+	}
+	switch (info->chipwidth) {
+		case FLASH_CFI_BY16:
+			printf("chip width is 16 bit, ");
+			switch (big_endian) {
+				case 0:
+					printf("Little Endian.\n");
+					break;
+				case 1:
+					printf("Big Endian.\n");
+					break;
+			}
+			break;
+	}
+#endif
+#endif		/*#ifdef CFG_FLASH_CFI*/
+
+	if (big_endian==0) value = (addr[0] & 0xFF000000) >>8;
+	else value = (addr[0] & 0x00FF0000);
+#ifdef DEBUG
+	printf("manufacturer=0x%x\n",(uint)(value>>16));
+#endif
+	switch (value) {
+	case MT_MANUFACT & 0xFFFF0000:	/* SHARP, MT or => Intel */
+	case INTEL_ALT_MANU & 0xFFFF0000:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+	default:
+		printf("unknown manufacturer: %x\n", (unsigned int)value);
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);			/* no or unknown flash	*/
+	}
+
+	if (info->portwidth==FLASH_CFI_16BIT) {
+		switch (big_endian) {
+			case 0:
+				value = (addr[0] & 0x0000FF00)>>8;
+				break;
+			case 1:
+				value = (addr[0] & 0x000000FF);
+				break;
+		}
+	}
+	else if (info->portwidth == FLASH_CFI_32BIT) {
+		switch (big_endian) {
+			case 0:
+				value = (addr[1] & 0x0000FF00)>>8;
+				break;
+			case 1:
+				value = (addr[1] & 0x000000FF);
+				break;
+		}
+	}
+
+#ifdef DEBUG
+	printf("deviceID=0x%x\n",(uint)value);
+#endif
+	switch (value) {
+	case (INTEL_ID_28F016S & 0x0000FFFF):
+		info->flash_id += FLASH_28F016SV;
+		info->sector_count = 32;
+		sector_offset = 0x10000;
+		break;				/* => 2 MB		*/
+
+	case (INTEL_ID_28F160S3 & 0x0000FFFF):
+		info->flash_id += FLASH_28F160S3;
+		info->sector_count = 32;
+		sector_offset = 0x10000;
+		break;				/* => 2 MB		*/
+
+	case (INTEL_ID_28F320S3 & 0x0000FFFF):
+		info->flash_id += FLASH_28F320S3;
+		info->sector_count = 64;
+		sector_offset = 0x10000;
+		break;				/* => 4 MB		*/
+
+	case (INTEL_ID_28F640J3A & 0x0000FFFF):
+		info->flash_id += FLASH_28F640J3A;
+		info->sector_count = 64;
+		sector_offset = 0x20000;
+		break;                          /* => 8 MB             */
+
+	case SHARP_ID_28F016SCL & 0x0000FFFF:
+	case SHARP_ID_28F016SCZ & 0x0000FFFF:
+		info->flash_id      = FLASH_MAN_SHARP | FLASH_LH28F016SCT;
+		info->sector_count  = 32;
+		sector_offset = 0x10000;
+		break;				/* => 2 MB		*/
+
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);			/* => no or unknown flash */
+
+	}
+
+	sector_offset = sector_offset * (info->portwidth / info->chipwidth);
+	info->size = info->sector_count * sector_offset;
+
+	/* set up sector start address table */
+	for (i = 0; i < info->sector_count; i++) {
+		info->start[i] = base;
+		base += sector_offset;
+		/* don't know how to check sector protection */
+		info->protect[i] = 0;
+	}
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN) {
+		addr = (vu_long *)info->start[0];
+		*addr = 0xFFFFFF;	/* reset bank to read array mode */
+		asm("sync");
+	}
+
+	return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	int flag, prot, sect;
+	ulong start, now, last, ready, erase_err_status;
+
+	if (big_endian == 1) {
+		ready = 0x0080;
+		erase_err_status = 0x00a0;
+	}
+	else {
+		ready = 0x8000;
+		erase_err_status = 0xa000;
+	}
+	if ((info->portwidth / info->chipwidth)==2) {
+		ready += (ready <<16);
+		erase_err_status += (erase_err_status <<16);
+	}
+
+#ifdef DEBUG
+	printf ("\nReady flag is 0x%lx\nErase error flag is 0x%lx", ready, erase_err_status);
+#endif
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if (    ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL)
+	     && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+			info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+#ifdef DEBUG
+	printf("\nFlash Erase:\n");
+#endif
+	/* Make Sure Block Lock Bit is not set. */
+	if(clear_block_lock_bit(info, (vu_long *)(info->start[s_first]))){
+		return 1;
+	}
+
+	/* Start erase on unprotected sectors */
+#if defined(DEBUG)
+	printf("Begin to erase now,s_first=0x%x s_last=0x%x...\n",s_first,s_last);
+#endif
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			vu_short *addr16 = (vu_short *)(info->start[sect]);
+			vu_long *addr   = (vu_long *)(info->start[sect]);
+			printf(".");
+			switch (info->portwidth) {
+				case FLASH_CFI_16BIT:
+					asm("sync");
+					last = start = get_timer (0);
+					/* Disable interrupts which might cause a timeout here */
+					flag = disable_interrupts();
+					/* Reset Array */
+					*addr16 = 0xffff;
+					asm("sync");
+					/* Clear Status Register */
+					*addr16 = 0x5050;
+					asm("sync");
+					/* Single Block Erase Command */
+					*addr16 = 0x2020;
+					asm("sync");
+					/* Confirm */
+					*addr16 = 0xD0D0;
+					asm("sync");
+					if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
+					    /* Resume Command, as per errata update */
+					    *addr16 = 0xD0D0;
+					    asm("sync");
+					}
+					/* re-enable interrupts if necessary */
+					if (flag)
+						enable_interrupts();
+					/* wait at least 80us - let's wait 1 ms */
+					*addr16 = 0x7070;
+					udelay (1000);
+					while ((*addr16 & ready) != ready) {
+						if((*addr16 & erase_err_status)== erase_err_status){
+							printf("Error in Block Erase - Lock Bit may be set!\n");
+							printf("Status Register = 0x%X\n", (uint)*addr16);
+							*addr16 = 0xFFFF;	/* reset bank */
+							asm("sync");
+							return 1;
+						}
+						if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+							printf ("Timeout\n");
+							*addr16 = 0xFFFF;	/* reset bank */
+							asm("sync");
+							return 1;
+						}
+						/* show that we're waiting */
+						if ((now - last) > 1000) {	/* every second */
+							putc ('.');
+							last = now;
+						}
+					}
+					/* reset to read mode */
+					*addr16 = 0xFFFF;
+					asm("sync");
+					break;
+				case FLASH_CFI_32BIT:
+					asm("sync");
+					last = start = get_timer (0);
+					/* Disable interrupts which might cause a timeout here */
+					flag = disable_interrupts();
+					/* Reset Array */
+					*addr = 0xffffffff;
+					asm("sync");
+					/* Clear Status Register */
+					*addr = 0x50505050;
+					asm("sync");
+					/* Single Block Erase Command */
+					*addr = 0x20202020;
+					asm("sync");
+					/* Confirm */
+					*addr = 0xD0D0D0D0;
+					asm("sync");
+					if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
+					    /* Resume Command, as per errata update */
+					    *addr = 0xD0D0D0D0;
+					    asm("sync");
+					}
+					/* re-enable interrupts if necessary */
+					if (flag)
+						enable_interrupts();
+					/* wait at least 80us - let's wait 1 ms */
+					*addr = 0x70707070;
+					udelay (1000);
+					while ((*addr & ready) != ready) {
+						if((*addr & erase_err_status)==erase_err_status){
+							printf("Error in Block Erase - Lock Bit may be set!\n");
+							printf("Status Register = 0x%X\n", (uint)*addr);
+							*addr = 0xFFFFFFFF;	/* reset bank */
+							asm("sync");
+							return 1;
+						}
+						if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+							printf ("Timeout\n");
+							*addr = 0xFFFFFFFF;	/* reset bank */
+							asm("sync");
+							return 1;
+						}
+						/* show that we're waiting */
+						if ((now - last) > 1000) {	/* every second */
+							putc ('.');
+							last = now;
+						}
+					}
+					/* reset to read mode */
+					*addr = 0xFFFFFFFF;
+					asm("sync");
+					break;
+			}	/* end switch */
+		}		/* end if */
+	}			/* end for */
+
+	printf ("flash erase done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+#define FLASH_BLOCK_SIZE 32
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data, count, temp;
+/*	ulong temp[FLASH_BLOCK_SIZE/4];*/
+	int i, l, rc;
+
+	count = cnt;
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i=0, cp=wp; i<l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+		for (; i<4 && cnt>0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt==0 && i<4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	cp = wp;
+	/* handle unaligned block bytes , flash block size = 16bytes */
+	wp = (cp+FLASH_BLOCK_SIZE-1) & ~(FLASH_BLOCK_SIZE-1);
+	if ((wp-cp)>=cnt) {
+		if ((rc = write_block(info,src,cp,wp-cp)) !=0)
+			return (rc);
+		src += wp-cp;
+		cnt -= wp-cp;
+	}
+	/* handle aligned block bytes */
+	temp = 0;
+	printf("\n");
+	while ( cnt >= FLASH_BLOCK_SIZE) {
+		if ((rc = write_block(info,src,cp,FLASH_BLOCK_SIZE)) !=0) {
+			return (rc);
+		}
+		src += FLASH_BLOCK_SIZE;
+		cp += FLASH_BLOCK_SIZE;
+		cnt -= FLASH_BLOCK_SIZE;
+		if (((count-cnt)>>10)>temp) {
+			temp=(count-cnt)>>10;
+			printf("\r%d KB",temp);
+		}
+	}
+	printf("\n");
+	wp = cp;
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i=0; i<4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp  += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i<4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	return (write_word(info, wp, data));
+}
+#undef FLASH_BLOCK_SIZE
+
+/*-----------------------------------------------------------------------
+ * Write block to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * -1  Error
+ */
+static int write_block(flash_info_t *info, uchar * src, ulong dest, ulong cnt)
+{
+	vu_short *baddr, *addr = (vu_short *)dest;
+	ushort data;
+	ulong start, now, xsr,csr, ready;
+	int flag;
+
+	if (cnt==0) return 0;
+	else if(cnt != (cnt& ~1)) return -1;
+
+	/* Check if Flash is (sufficiently) erased */
+	data = * src;
+	data = (data<<8) | *(src+1);
+	if ((*addr & data) != data) {
+		return (2);
+	}
+	if (big_endian == 1) {
+		ready = 0x0080;
+	}
+	else {
+		ready = 0x8000;
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+		do {
+			/* Write Command */
+			*addr = 0xe8e8;
+			asm("sync");
+			xsr = *addr;
+			asm("sync");
+		} while (!(xsr & ready));	/*wait until read */
+		/*write count=BLOCK SIZE -1 */
+		data=(cnt>>1)-1;
+		data=(data<<8)|data;
+		*addr = data;		/* word mode, cnt/2 */
+		asm("sync");
+		baddr = addr;
+		while(cnt) {
+			data = * src++;
+			data = (data<<8) | *src++;
+			asm("sync");
+			*baddr = data;
+			asm("sync");
+			++baddr;
+			cnt = cnt -2;
+		}
+		*addr = 0xd0d0;			/* confirm write */
+		start = get_timer(0);
+		asm("sync");
+		if (flag)
+			enable_interrupts();
+		/* data polling for D7 */
+		flag  = 0;
+		while (((csr = *addr) & ready) != ready) {
+			if ((now=get_timer(start)) > CFG_FLASH_WRITE_TOUT) {
+				flag = 1;
+				break;
+			}
+		}
+		if (csr & 0x4040) {
+			printf ("CSR indicates write error (%04x) at %08lx\n", csr, (ulong)addr);
+			flag = 1;
+		}
+		/* Clear Status Registers Command */
+		*addr = 0x5050;
+		asm("sync");
+		/* Reset to read array mode */
+		*addr = 0xFFFF;
+		asm("sync");
+	return (flag);
+}
+
+
+/*-----------------------------------------------------------------------
+ * Write a short word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_short (flash_info_t *info, ulong dest, ushort data)
+{
+	vu_short *addr = (vu_short *)dest;
+	ulong start, now, csr, ready;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*addr & data) != data) {
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+		/* Write Command */
+		*addr = 0x1010;
+		start = get_timer (0);
+		asm("sync");
+		/* Write Data */
+		*addr = data;
+		asm("sync");
+		/* re-enable interrupts if necessary */
+		if (flag)
+			enable_interrupts();
+		if (big_endian == 1) {
+			ready = 0x0080;
+		}
+		else {
+			ready = 0x8000;
+		}
+		/* data polling for D7 */
+		flag  = 0;
+		while (((csr = *addr) & ready) != ready) {
+			if ((now=get_timer(start)) > CFG_FLASH_WRITE_TOUT) {
+				flag = 1;
+				break;
+			}
+		}
+		if (csr & 0x4040) {
+			printf ("CSR indicates write error (%04x) at %08lx\n", csr, (ulong)addr);
+			flag = 1;
+		}
+		/* Clear Status Registers Command */
+		*addr = 0x5050;
+		asm("sync");
+		/* Reset to read array mode */
+		*addr = 0xFFFF;
+		asm("sync");
+	return (flag);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+	vu_long *addr = (vu_long *)dest;
+	ulong start, csr, ready;
+	int flag=0;
+
+	switch (info->portwidth) {
+	case FLASH_CFI_32BIT:
+		/* Check if Flash is (sufficiently) erased */
+		if ((*addr & data) != data) {
+			return (2);
+		}
+		/* Disable interrupts which might cause a timeout here */
+		flag = disable_interrupts();
+
+		if (big_endian == 1) {
+			ready = 0x0080;
+		}
+		else {
+			ready = 0x8000;
+		}
+		if ((info->portwidth / info->chipwidth)==2) {
+			ready += (ready <<16);
+		}
+		else {
+			ready = ready << 16;
+		}
+		/* Write Command */
+		*addr = 0x10101010;
+		asm("sync");
+		/* Write Data */
+		*addr = data;
+		/* re-enable interrupts if necessary */
+		if (flag)
+			enable_interrupts();
+		/* data polling for D7 */
+		start = get_timer (0);
+		flag  = 0;
+		while (((csr = *addr) & ready) != ready) {
+			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+				flag = 1;
+				break;
+			}
+		}
+		if (csr & 0x40404040) {
+			printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr);
+			flag = 1;
+		}
+		/* Clear Status Registers Command */
+		*addr = 0x50505050;
+		asm("sync");
+		/* Reset to read array mode */
+		*addr = 0xFFFFFFFF;
+		asm("sync");
+		break;
+	case FLASH_CFI_16BIT:
+		flag = write_short (info, dest,  (unsigned short) (data>>16));
+		if (flag == 0)
+			flag = write_short (info, dest+2,  (unsigned short) (data));
+		break;
+	}
+	return (flag);
+}
+
+/*-----------------------------------------------------------------------
+ * Clear Block Lock Bit, returns:
+ * 0 - OK
+ * 1 - Timeout
+ */
+
+static int clear_block_lock_bit(flash_info_t * info, vu_long  * addr)
+{
+	ulong start, now, ready;
+
+	/* Reset Array */
+	*addr = 0xffffffff;
+	asm("sync");
+	/* Clear Status Register */
+	*addr = 0x50505050;
+	asm("sync");
+
+	*addr = 0x60606060;
+	asm("sync");
+	*addr = 0xd0d0d0d0;
+	asm("sync");
+
+
+	if (big_endian == 1) {
+		ready = 0x0080;
+	}
+	else {
+		ready = 0x8000;
+	}
+	if ((info->portwidth / info->chipwidth)==2) {
+		ready += (ready <<16);
+	}
+	else {
+		ready = ready << 16;
+	}
+#ifdef DEBUG
+	printf ("%s: Ready flag is 0x%8lx\n", __FUNCTION__, ready);
+#endif
+	*addr = 0x70707070;	/* read status */
+	start = get_timer (0);
+	while((*addr & ready) != ready){
+		if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout on clearing Block Lock Bit\n");
+			*addr = 0xFFFFFFFF;	/* reset bank */
+			asm("sync");
+			return 1;
+		}
+	}
+	return 0;
+}
+
+#endif /* !CFG_NO_FLASH */
diff --git a/board/mpc8540eval/init.S b/board/mpc8540eval/init.S
new file mode 100644
index 000000000..8c2ca65a9
--- /dev/null
+++ b/board/mpc8540eval/init.S
@@ -0,0 +1,178 @@
+/*
+* Copyright (C) 2002,2003, Motorola Inc.
+* Xianghua Xiao <X.Xiao@motorola.com>
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <config.h>
+#include <mpc85xx.h>
+
+#define	entry_start \
+	mflr	r1 	;	\
+	bl	0f 	;
+
+#define	entry_end \
+0:	mflr	r0	;	\
+	mtlr	r1	;	\
+	blr		;
+
+/* TLB1 entries configuration: */
+
+	.section	.bootpg, "ax"
+	.globl	tlb1_entry
+tlb1_entry:
+	entry_start
+
+	.long 0x0a	/* the following data table uses a few of 16 TLB entries */
+
+	.long TLB1_MAS0(1,1,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+  #if defined(CFG_FLASH_PORT_WIDTH_16)
+	.long TLB1_MAS0(1,2,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_4M)
+	.long TLB1_MAS2(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,3,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_4M)
+	.long TLB1_MAS2((((CFG_FLASH_BASE+0x400000)>>12)&0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3((((CFG_FLASH_BASE+0x400000)>>12)&0xfffff),0,0,0,0,0,1,0,1,0,1)
+  #else
+	.long TLB1_MAS0(1,2,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16M)
+	.long TLB1_MAS2(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,3,0)
+	.long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+  #endif
+
+  #if !defined(CONFIG_SPD_EEPROM)
+	.long TLB1_MAS0(1,4,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
+	.long TLB1_MAS2(((CFG_DDR_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(((CFG_DDR_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,5,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
+	.long TLB1_MAS2((((CFG_DDR_SDRAM_BASE+0x4000000)>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3((((CFG_DDR_SDRAM_BASE+0x4000000)>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+  #else
+	.long TLB1_MAS0(1,4,0)
+	.long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,5,0)
+	.long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+  #endif
+
+	.long TLB1_MAS0(1,6,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
+  #if defined(CONFIG_RAM_AS_FLASH)
+	.long TLB1_MAS2(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+  #else
+	.long TLB1_MAS2(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+  #endif
+	.long TLB1_MAS3(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,7,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
+  #ifdef CONFIG_L2_INIT_RAM
+	.long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,1,0,0,0,0)
+  #else
+	.long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+  #endif
+	.long TLB1_MAS3(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,8,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
+	.long TLB1_MAS2(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,9,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
+	.long TLB1_MAS2(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+  #if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+	.long TLB1_MAS0(1,15,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+  #else
+	.long TLB1_MAS0(1,15,0)
+	.long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+  #endif
+	entry_end
+
+/* LAW(Local Access Window) configuration:
+ * 0000_0000-0800_0000: DDR(128M) -or- larger
+ * f000_0000-f3ff_ffff: PCI(256M)
+ * f400_0000-f7ff_ffff: RapidIO(128M)
+ * f800_0000-ffff_ffff: localbus(128M)
+ *   f800_0000-fbff_ffff: LBC SDRAM(64M)
+ *   fc00_0000-fdef_ffff: LBC BCSR,RTC,etc(31M)
+ *   fdf0_0000-fdff_ffff: CCSRBAR(1M)
+ *   fe00_0000-ffff_ffff: Flash(32M)
+ * Note: CCSRBAR and L2-as-SRAM don't need configure Local Access
+ *       Window.
+ * Note: If flash is 8M at default position(last 8M),no LAW needed.
+ */
+
+#if !defined(CONFIG_SPD_EEPROM)
+#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
+#define LAWAR0 	(LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M))
+#else
+#define LAWBAR0 0
+#define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
+#endif
+
+#define LAWBAR1 ((CFG_PCI_MEM_BASE>>12) & 0xfffff)
+#define LAWAR1 	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#if !defined(CONFIG_RAM_AS_FLASH)
+#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
+#define LAWAR2 	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M))
+#else
+#define LAWBAR2 0
+#define LAWAR2 ((LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
+#endif
+
+	.section .bootpg, "ax"
+	.globl	law_entry
+law_entry:
+	entry_start
+	.long 0x03
+	.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2
+	entry_end
diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c
new file mode 100644
index 000000000..c90dbc762
--- /dev/null
+++ b/board/mpc8540eval/mpc8540eval.c
@@ -0,0 +1,271 @@
+/*
+ * (C) Copyright 2002,2003, Motorola Inc.
+ * Xianghua Xiao, (X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+extern long int spd_sdram (void);
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <spd.h>
+
+
+
+long int fixed_sdram (void);
+
+/* MPC8540ADS Board Status & Control Registers */
+#if 0
+typedef struct bscr_ {
+	unsigned long bcsr0;
+	unsigned long bcsr1;
+	unsigned long bcsr2;
+	unsigned long bcsr3;
+	unsigned long bcsr4;
+	unsigned long bcsr5;
+	unsigned long bcsr6;
+	unsigned long bcsr7;
+} bcsr_t;
+#endif
+
+
+
+int board_pre_init (void)
+{
+#if defined(CONFIG_PCI)
+	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile ccsr_pcix_t *pci = &immr->im_pcix;
+
+	pci->peer &= 0xffffffdf; /* disable master abort */
+#endif
+	return 0;
+}
+
+int checkboard (void)
+{
+	sys_info_t sysinfo;
+
+	get_sys_info (&sysinfo);
+
+	printf ("Board: Freescale MPC8540EVAL Board\n");
+	printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+	printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000);
+	printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000);
+	if((CFG_LBC_LCRR & 0x0f) == 2 || (CFG_LBC_LCRR & 0x0f) == 4 \
+		|| (CFG_LBC_LCRR & 0x0f) == 8) {
+		printf ("\tLBC: %lu MHz\n", sysinfo.freqSystemBus / 1000000 /(CFG_LBC_LCRR & 0x0f));
+	} else {
+		printf("\tLBC: unknown\n");
+	}
+	printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n");
+	return (0);
+}
+
+long int initdram (int board_type)
+{
+	long dram_size = 0;
+	extern long spd_sdram (void);
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+#if !defined(CONFIG_RAM_AS_FLASH)
+	volatile ccsr_lbc_t *lbc= &immap->im_lbc;
+	sys_info_t sysinfo;
+	uint temp_lbcdll = 0;
+#endif
+#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
+	volatile ccsr_gur_t *gur= &immap->im_gur;
+#endif
+
+#if defined(CONFIG_DDR_DLL)
+	uint temp_ddrdll = 0;
+
+	/* Work around to stabilize DDR DLL */
+	temp_ddrdll = gur->ddrdllcr;
+	gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
+	asm("sync;isync;msync");
+#endif
+
+#if defined(CONFIG_SPD_EEPROM)
+	dram_size = spd_sdram ();
+#else
+	dram_size = fixed_sdram ();
+#endif
+
+#if defined(CFG_RAMBOOT)
+	return dram_size;
+#endif
+
+#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */
+	get_sys_info(&sysinfo);
+	/* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
+	if(sysinfo.freqSystemBus/(CFG_LBC_LCRR & 0x0f) < 66000000) {
+		lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff)| 0x80000000;
+	} else {
+		lbc->lcrr = CFG_LBC_LCRR & 0x7fffffff;
+		udelay(200);
+		temp_lbcdll = gur->lbcdllcr;
+		gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
+		asm("sync;isync;msync");
+	}
+	lbc->or2 = CFG_OR2_PRELIM; /* 64MB SDRAM */
+	lbc->br2 = CFG_BR2_PRELIM;
+	lbc->lbcr = CFG_LBC_LBCR;
+	lbc->lsdmr = CFG_LBC_LSDMR_1;
+	asm("sync");
+	* (ulong *)0 = 0x000000ff;
+	lbc->lsdmr = CFG_LBC_LSDMR_2;
+	asm("sync");
+	* (ulong *)0 = 0x000000ff;
+	lbc->lsdmr = CFG_LBC_LSDMR_3;
+	asm("sync");
+	* (ulong *)0 = 0x000000ff;
+	lbc->lsdmr = CFG_LBC_LSDMR_4;
+	asm("sync");
+	* (ulong *)0 = 0x000000ff;
+	lbc->lsdmr = CFG_LBC_LSDMR_5;
+	asm("sync");
+	lbc->lsrt = CFG_LBC_LSRT;
+	asm("sync");
+	lbc->mrtpr = CFG_LBC_MRTPR;
+	asm("sync");
+#endif
+
+#if defined(CONFIG_DDR_ECC)
+	{
+		/* Initialize all of memory for ECC, then
+		 * enable errors */
+		uint *p = 0;
+		uint i = 0;
+		volatile immap_t *immap = (immap_t *)CFG_IMMR;
+		volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+		dma_init();
+		for (*p = 0; p < (uint *)(8 * 1024); p++) {
+			if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
+			*p = (unsigned int)0xdeadbeef;
+			if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); }
+		}
+
+		/* 8K */
+		dma_xfer((uint *)0x2000,0x2000,(uint *)0);
+		/* 16K */
+		dma_xfer((uint *)0x4000,0x4000,(uint *)0);
+		/* 32K */
+		dma_xfer((uint *)0x8000,0x8000,(uint *)0);
+		/* 64K */
+		dma_xfer((uint *)0x10000,0x10000,(uint *)0);
+		/* 128k */
+		dma_xfer((uint *)0x20000,0x20000,(uint *)0);
+		/* 256k */
+		dma_xfer((uint *)0x40000,0x40000,(uint *)0);
+		/* 512k */
+		dma_xfer((uint *)0x80000,0x80000,(uint *)0);
+		/* 1M */
+		dma_xfer((uint *)0x100000,0x100000,(uint *)0);
+		/* 2M */
+		dma_xfer((uint *)0x200000,0x200000,(uint *)0);
+		/* 4M */
+		dma_xfer((uint *)0x400000,0x400000,(uint *)0);
+
+		for (i = 1; i < dram_size / 0x800000; i++) {
+			dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0);
+		}
+
+		/* Enable errors for ECC */
+		ddr->err_disable = 0x00000000;
+		asm("sync;isync;msync");
+	}
+#endif
+
+	return dram_size;
+}
+
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+	uint *pstart = (uint *) CFG_MEMTEST_START;
+	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *p;
+
+	printf("SDRAM test phase 1:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("SDRAM test phase 2:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("SDRAM test passed.\n");
+	return 0;
+}
+#endif
+
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ *  fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+long int fixed_sdram (void)
+{
+  #ifndef CFG_RAMBOOT
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+
+	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
+	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
+	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
+	ddr->sdram_mode = CFG_DDR_MODE;
+	ddr->sdram_interval = CFG_DDR_INTERVAL;
+    #if defined (CONFIG_DDR_ECC)
+	ddr->err_disable = 0x0000000D;
+	ddr->err_sbe = 0x00ff0000;
+    #endif
+	asm("sync;isync;msync");
+	udelay(500);
+    #if defined (CONFIG_DDR_ECC)
+	/* Enable ECC checking */
+	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+    #else
+	ddr->sdram_cfg = CFG_DDR_CONTROL;
+    #endif
+	asm("sync; isync; msync");
+	udelay(500);
+  #endif
+	return (CFG_SDRAM_SIZE * 1024 * 1024);
+}
+#endif	/* !defined(CONFIG_SPD_EEPROM) */
diff --git a/board/mpc8540eval/u-boot.lds b/board/mpc8540eval/u-boot.lds
new file mode 100644
index 000000000..2479af151
--- /dev/null
+++ b/board/mpc8540eval/u-boot.lds
@@ -0,0 +1,152 @@
+/*
+ * (C) Copyright 2002,2003, Motorola,Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Assumes that the size of u-boot is less than 512K and the
+ * start address is aligned on a 512K block.
+ * Boot page and reset vector is put at that end of the 512K block. */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc85xx/start.o	(.text)
+    board/mpc8540eval/init.o (.text)
+    cpu/mpc85xx/traps.o (.text)
+    cpu/mpc85xx/interrupts.o (.text)
+    cpu/mpc85xx/cpu_init.o (.text)
+    cpu/mpc85xx/cpu.o (.text)
+    cpu/mpc85xx/speed.o (.text)
+    cpu/mpc85xx/pci.o (.text)
+    common/dlmalloc.o (.text)
+    lib_generic/crc32.o (.text)
+    lib_ppc/extable.o (.text)
+    lib_generic/zlib.o (.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+   }
+    _etext = .;
+    PROVIDE (etext = .);
+    .rodata    :
+   {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+
+  . = (. & 0xFFF80000) + 0x0007F000;
+  .bootpg   :
+  {
+    cpu/mpc85xx/start.o	(.bootpg)
+    board/mpc8540eval/init.o (.bootpg)
+  } = 0xffff
+
+  . = (. & 0xFFF80000) + 0x0007FFFC;
+  .resetvec  :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+}
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index dd8189931..fc869a338 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -155,11 +155,13 @@ _start_e500:
 	mtspr	MCSR,r0
 	mtspr	DEAR,r0
 
-	mtspr	DBCR0,r0
+	/* not needed and conflicts with some debuggers */
+	/* mtspr	DBCR0,r0 */
 	mtspr	DBCR1,r0
 	mtspr	DBCR2,r0
-	mtspr	IAC1,r0
-	mtspr	IAC2,r0
+	/* not needed and conflicts with some debuggers */
+	/* mtspr	IAC1,r0 */
+	/* mtspr	IAC2,r0 */
 	mtspr	DAC1,r0
 	mtspr	DAC2,r0
 
diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
new file mode 100644
index 000000000..34cbe46c5
--- /dev/null
+++ b/include/configs/MPC8540EVAL.h
@@ -0,0 +1,342 @@
+/*
+ * (C) Copyright 2002,2003 Motorola,Inc.
+ * Modified by Lunsheng Wang, lunsheng@sohu.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* mpc8540eval board configuration file */
+/* please refer to doc/README.mpc85xxads for more info */
+/* make sure you change the MAC address and other network params first,
+ * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+/* High Level Configuration Options */
+#define CONFIG_BOOKE		1	    /* BOOKE 			*/
+#define CONFIG_E500		1	    /* BOOKE e500 family	*/
+#define CONFIG_MPC85xx		1	    /* MPC8540/MPC8560		*/
+#define CONFIG_MPC8540		1	    /* MPC8540 specific	        */
+#define CONFIG_MPC8540EVAL	1	    /* MPC8540EVAL board specific */
+
+#undef  CONFIG_PCI	         	    /* pci ethernet support	*/
+#define CONFIG_TSEC_ENET 		    /* tsec ethernet support  */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SPD_EEPROM                   /* Use SPD EEPROM for DDR setup */
+#undef  CONFIG_DDR_ECC			    /* only for ECC DDR module */
+#define CONFIG_DDR_DLL                      /* possible DLL fix needed */
+
+/* Using Localbus SDRAM to emulate flash before we can program the flash,
+ * normally you only need a flash-boot image(u-boot.bin),if unsure undef this.
+ * Not availabe for EVAL board
+ */
+#undef CONFIG_RAM_AS_FLASH
+
+/* sysclk for MPC8540EVAL */
+#if defined(CONFIG_SYSCLK_66M)
+#define CONFIG_SYS_CLK_FREQ   66000000    /* the oscillator on board is 66Mhz   */
+                                            /* can also get 66M clock from external PCI */
+#else
+  #define CONFIG_SYS_CLK_FREQ   33000000   /* most pci cards are 33Mhz */
+#endif
+
+/* below can be toggled for performance analysis. otherwise use default */
+#define CONFIG_L2_CACHE		    	    /* toggle L2 cache 	*/
+#undef  CONFIG_BTB			    /* toggle branch predition */
+#undef  CONFIG_ADDR_STREAMING		    /* toggle addr streaming   */
+
+#define CONFIG_BOARD_PRE_INIT	1	    /* Call board_pre_init	*/
+
+#undef	CFG_DRAM_TEST			    /* memory test, takes time  */
+#define CFG_MEMTEST_START	0x00200000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x00400000
+
+#if defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET)
+#error "You can only use either PCI Ethernet Card or TSEC Ethernet, not both."
+#endif
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT 	0xff700000	/* CCSRBAR Default	*/
+#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR 	*/
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
+
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory  */
+#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CFG_SDRAM_SIZE		256             /* DDR is now 256MB     */
+
+#if defined(CONFIG_RAM_AS_FLASH)
+#define CFG_LBC_SDRAM_BASE	0xfc000000	/* Localbus SDRAM */
+#else
+#define CFG_LBC_SDRAM_BASE      0xf0000000      /* Localbus SDRAM */
+#endif
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 0MB	*/
+
+#if defined(CONFIG_RAM_AS_FLASH)
+#define CFG_FLASH_BASE          0xf8000000      /* start of FLASH  16M  */
+#define CFG_BR0_PRELIM          0xf8001801      /* port size 32bit */
+#else /* Boot from real Flash */
+#define CFG_FLASH_BASE		0xff800000	/* start of FLASH 8M    */
+#define CFG_BR0_PRELIM		0xff801001	/* port size 16bit	*/
+#endif
+
+#define	CFG_OR0_PRELIM		0xff806f67	/* 8MB Flash		*/
+#define CFG_MAX_FLASH_BANKS	1		/* number of banks	*/
+#define CFG_MAX_FLASH_SECT	64		/* sectors per device   */
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000	/* Timeout for Flash Erase (in ms)*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)*/
+#define CFG_FLASH_CFI		1
+
+#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef  CFG_RAMBOOT
+#endif
+
+#define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
+
+/* Here some DDR setting should be added */
+
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+/* local bus definitions */
+#define CFG_BR2_PRELIM		0xf0001861	/* 64MB localbus SDRAM  */
+#define CFG_OR2_PRELIM		0xfc006901
+#define CFG_LBC_LCRR		0x00030004	/* local bus freq divider*/
+#define CFG_LBC_LBCR		0x00000000
+#define CFG_LBC_LSRT		0x20000000
+#define CFG_LBC_MRTPR		0x20000000
+#define CFG_LBC_LSDMR_1		0x2861b723
+#define CFG_LBC_LSDMR_2		0x0861b723
+#define CFG_LBC_LSDMR_3		0x0861b723
+#define CFG_LBC_LSDMR_4		0x1861b723
+#define CFG_LBC_LSDMR_5		0x4061b723
+
+#if defined(CONFIG_RAM_AS_FLASH)
+#define CFG_BR4_PRELIM          0xf8000801      /* 32KB, 8-bit wide for ADS config reg */
+#else
+#define CFG_BR4_PRELIM          0xf8000801      /* 32KB, 8-bit wide for ADS config reg */
+#endif
+#define CFG_OR4_PRELIM          0xffffe1f1
+#define CFG_BCSR                (CFG_BR4_PRELIM & 0xffff8000)
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 	1
+#define CFG_INIT_RAM_ADDR   	0x40000000 	/* Initial RAM address	*/
+#define CFG_INIT_RAM_END    	0x4000	    	/* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE  	128		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN	    	(256 * 1024)    /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN	    	(128 * 1024)    /* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX     1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE    1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_BAUDRATE	 	115200
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define  CONFIG_HARD_I2C		/* I2C with hardware support*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+
+/* General PCI */
+#define CFG_PCI_MEM_BASE	0x80000000
+#define CFG_PCI_MEM_PHYS	0x80000000
+#define CFG_PCI_MEM_SIZE	0x20000000
+#define CFG_PCI_IO_BASE         0xe2000000
+
+#if defined(CONFIG_PCI)
+#define CONFIG_NET_MULTI
+#undef CONFIG_EEPRO100
+#define CONFIG_TULIP
+#define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+  #if !defined(CONFIG_PCI_PNP)
+  #define PCI_ENET0_IOADDR      0xe0000000
+  #define PCI_ENET0_MEMADDR     0xe0000000
+  #define PCI_IDSEL_NUMBER      0x0c 	/*slot0->3(IDSEL)=12->15*/
+  #endif
+#define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup  */
+#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+#define CFG_PCI_SUBSYS_DEVICEID 0x0008
+#elif defined(CONFIG_TSEC_ENET)
+#define CONFIG_NET_MULTI 	1
+#define CONFIG_MII		1	/* MII PHY management	*/
+#define CONFIG_MPC85XX_TSEC1    1
+#define CONFIG_MPC85XX_TSEC1_NAME      "TSEC0"
+#define CONFIG_MPC85XX_TSEC2	1
+#define CONFIG_MPC85XX_TSEC2_NAME      "TSEC1"
+#define CONFIG_MPC85XX_FEC      1
+#define CONFIG_MPC85XX_FEC_NAME                "FEC"
+#define TSEC1_PHY_ADDR          7
+#define	TSEC2_PHY_ADDR		4
+#define FEC_PHY_ADDR            2
+#define TSEC1_PHYIDX            0
+#define TSEC2_PHYIDX            0
+#define FEC_PHYIDX              0
+/* Options are: TSEC[0-1], FEC */
+#define CONFIG_ETHPRIME                "TSEC0"
+
+#define CONFIG_PHY_M88E1011     1       /* GigaBit Ether PHY    */
+#define INTEL_LXT971_PHY	1	/* on EVAL board. It is Davicom 9161 on ADS. */
+#endif
+
+#undef DEBUG
+
+/* Environment */
+#ifndef CFG_RAMBOOT
+  #if defined(CONFIG_RAM_AS_FLASH)
+  #define CFG_ENV_IS_NOWHERE
+  #define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x100000)
+  #define CFG_ENV_SIZE		0x2000
+  #else
+  #define CFG_ENV_IS_IN_FLASH	1
+  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+  #define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+  #endif
+  #define CFG_ENV_SIZE		0x2000
+#else
+/* #define CFG_NO_FLASH		1 */	/* Flash is not usable now	*/
+#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+#define CFG_ENV_SIZE		0x2000
+#endif
+
+/*#define CONFIG_BOOTARGS	"root=/dev/nfs rw nfsroot=192.168.1.10:/tftproot/192.168.1.11 ip=192.168.1.11:192.168.1.10:192.168.1.0:255.255.255.0:mpc8540ads-003:eth0:off console=ttyS0,115200"*/
+#define CONFIG_BOOTARGS	"root=/dev/ram rw console=ttyS0,115200"
+#define CONFIG_BOOTCOMMAND	"bootm 0xff800000 0xffa00000"
+#define CONFIG_BOOTDELAY	3 	/* -1 disable autoboot */
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
+  #if defined(CONFIG_PCI)
+  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_PCI | CFG_CMD_I2C ) & \
+				 ~(CFG_CMD_ENV | CFG_CMD_LOADS ))
+  #else
+  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C ) & \
+				 ~(CFG_CMD_ENV | \
+				  CFG_CMD_LOADS ))
+  #endif
+#else
+  #if defined(CONFIG_PCI)
+  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_PING | CFG_CMD_I2C )
+  #else
+  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C )
+  #endif
+#endif
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_LOAD_ADDR   0x2000000       /* default load address */
+#define CFG_PROMPT	"MPC8540EVAL=> "/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20) 	/* Initial Memory map for Linux */
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE	32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*****************************/
+/* Environment Configuration */
+/*****************************/
+/* The mac addresses for all ethernet interface */
+/* NOTE: change below for your network setting!!! */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_ETHADDR  00:01:af:07:9b:8a
+#define CONFIG_ETH1ADDR  00:01:af:07:9b:8b
+#define CONFIG_ETH2ADDR  00:01:af:07:9b:8c
+#endif
+
+#define CONFIG_ROOTPATH  /nfsroot
+#define CONFIG_BOOTFILE  your.uImage
+
+#define CONFIG_SERVERIP         192.168.101.1
+#define CONFIG_IPADDR           192.168.101.11
+#define CONFIG_GATEWAYIP        192.168.101.0
+#define CONFIG_NETMASK          255.255.255.0
+
+#define CONFIG_LOADADDR  200000   /* default location for tftp and bootm */
+
+#define CONFIG_HOSTNAME         MPC8540EVAL
+
+#endif	/* __CONFIG_H */