davinci: display correct clock info

Move the clock-rate dumping code into the cpu/.../davinci area
where it should have been, enabled by CONFIG_DISPLAY_CPUINFO,
updating the format and showing the DSP clock (where relevant).

Switch boards to use the cpuinfo() hook for this stuff.

Remove a few now-obsolete PLL #defines.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

13 files changed, 138 insertions, 29 deletions

diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c
index cfab729bb..ffdc20b93 100644
--- a/board/davinci/common/misc.c
+++ b/board/davinci/common/misc.c
@@ -28,6 +28,7 @@
 #include <net.h>
 #include <asm/arch/hardware.h>
 
+
 DECLARE_GLOBAL_DATA_PTR;
 
 int dram_init(void)
@@ -38,18 +39,6 @@ int dram_init(void)
 	return(0);
 }
 
-static int dv_get_pllm_output(uint32_t pllm)
-{
-	return (pllm + 1) * (CONFIG_SYS_HZ_CLOCK / 1000000);
-}
-
-void dv_display_clk_infos(void)
-{
-	printf("ARM Clock: %dMHz\n", dv_get_pllm_output(REG(PLL1_PLLM)) / 2);
-	printf("DDR Clock: %dMHz\n", dv_get_pllm_output(REG(PLL2_PLLM)) /
-	       ((REG(PLL2_DIV2) & 0x1f) + 1) / 2);
-}
-
 #ifdef CONFIG_DRIVER_TI_EMAC
 
 /* Read ethernet MAC address from EEPROM for DVEVM compatible boards.
diff --git a/board/davinci/common/misc.h b/board/davinci/common/misc.h
index 5d2978440..316159a2f 100644
--- a/board/davinci/common/misc.h
+++ b/board/davinci/common/misc.h
@@ -24,7 +24,6 @@
 
 extern int eth_hw_init(void);
 
-void dv_display_clk_infos(void);
 int dvevm_read_mac_address(uint8_t *buf);
 void dv_configure_mac_address(uint8_t *rom_enetaddr);
 
diff --git a/board/davinci/dvevm/dvevm.c b/board/davinci/dvevm/dvevm.c
index 162a5dcea..8f386331e 100644
--- a/board/davinci/dvevm/dvevm.c
+++ b/board/davinci/dvevm/dvevm.c
@@ -69,8 +69,6 @@ int misc_init_r(void)
 	uint8_t video_mode;
 	uint8_t eeprom_enetaddr[6];
 
-	dv_display_clk_infos();
-
 	/* Read Ethernet MAC address from EEPROM if available. */
 	if (dvevm_read_mac_address(eeprom_enetaddr))
 		dv_configure_mac_address(eeprom_enetaddr);
diff --git a/board/davinci/schmoogie/schmoogie.c b/board/davinci/schmoogie/schmoogie.c
index d6dfef581..6e0f59133 100644
--- a/board/davinci/schmoogie/schmoogie.c
+++ b/board/davinci/schmoogie/schmoogie.c
@@ -104,8 +104,6 @@ int misc_init_r(void)
 			0xb6, 0xe8, 0x0a, 0x54, 0xd7, 0x89, 0x6b, 0x35
 		};
 
-	dv_display_clk_infos();
-
 	/* Set serial number from UID chip */
 	if (i2c_read(CONFIG_SYS_UID_ADDR, 0, 1, buf, 8)) {
 		printf("\nUID @ 0x%02x read FAILED!!!\n", CONFIG_SYS_UID_ADDR);
diff --git a/board/davinci/sffsdr/sffsdr.c b/board/davinci/sffsdr/sffsdr.c
index 7d855fb83..7f4ee361b 100644
--- a/board/davinci/sffsdr/sffsdr.c
+++ b/board/davinci/sffsdr/sffsdr.c
@@ -131,8 +131,6 @@ int misc_init_r(void)
 	/* EMIF-A CS3 configuration for FPGA. */
 	REG(DAVINCI_A3CR) = DAVINCI_A3CR_VAL;
 
-	dv_display_clk_infos();
-
 	/* Configure I2C switch (PCA9543) to enable channel 0. */
 	i2cbuf = CONFIG_SYS_I2C_PCA9543_ENABLE_CH0;
 	if (i2c_write(CONFIG_SYS_I2C_PCA9543_ADDR, 0,
diff --git a/board/davinci/sonata/sonata.c b/board/davinci/sonata/sonata.c
index 155fb549c..a0bea0517 100644
--- a/board/davinci/sonata/sonata.c
+++ b/board/davinci/sonata/sonata.c
@@ -66,8 +66,6 @@ int misc_init_r(void)
 {
 	uint8_t eeprom_enetaddr[6];
 
-	dv_display_clk_infos();
-
 	/* Read Ethernet MAC address from EEPROM if available. */
 	if (dvevm_read_mac_address(eeprom_enetaddr))
 		dv_configure_mac_address(eeprom_enetaddr);
diff --git a/cpu/arm926ejs/davinci/Makefile b/cpu/arm926ejs/davinci/Makefile
index 480f19f55..6eaa89c61 100644
--- a/cpu/arm926ejs/davinci/Makefile
+++ b/cpu/arm926ejs/davinci/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(SOC).a
 
-COBJS-y				+= timer.o psc.o
+COBJS-y				+= cpu.o timer.o psc.o
 COBJS-$(CONFIG_SOC_DM355)	+= dm355.o
 COBJS-$(CONFIG_SOC_DM644X)	+= dm644x.o
 COBJS-$(CONFIG_DRIVER_TI_EMAC)	+= ether.o lxt972.o dp83848.o
diff --git a/cpu/arm926ejs/davinci/cpu.c b/cpu/arm926ejs/davinci/cpu.c
new file mode 100644
index 000000000..29aead6f4
--- /dev/null
+++ b/cpu/arm926ejs/davinci/cpu.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2004 Texas Instruments.
+ * Copyright (C) 2009 David Brownell
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+
+
+/* offsets from PLL controller base */
+#define PLLC_PLLCTL	0x100
+#define PLLC_PLLM	0x110
+#define PLLC_PREDIV	0x114
+#define PLLC_PLLDIV1	0x118
+#define PLLC_PLLDIV2	0x11c
+#define PLLC_PLLDIV3	0x120
+#define PLLC_POSTDIV	0x128
+#define PLLC_BPDIV	0x12c
+#define PLLC_PLLDIV4	0x160
+#define PLLC_PLLDIV5	0x164
+#define PLLC_PLLDIV6	0x168
+#define PLLC_PLLDIV8	0x170
+#define PLLC_PLLDIV9	0x174
+
+#define BIT(x)		(1 << (x))
+
+/* SOC-specific pll info */
+#ifdef CONFIG_SOC_DM355
+#define ARM_PLLDIV	PLLC_PLLDIV1
+#define DDR_PLLDIV	PLLC_PLLDIV1
+#endif
+
+#ifdef CONFIG_SOC_DM644X
+#define ARM_PLLDIV	PLLC_PLLDIV2
+#define DSP_PLLDIV	PLLC_PLLDIV1
+#define DDR_PLLDIV	PLLC_PLLDIV2
+#endif
+
+#ifdef CONFIG_SOC_DM6447
+#define ARM_PLLDIV	PLLC_PLLDIV2
+#define DSP_PLLDIV	PLLC_PLLDIV1
+#define DDR_PLLDIV	PLLC_PLLDIV1
+#endif
+
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+
+static unsigned pll_div(volatile void *pllbase, unsigned offset)
+{
+	u32	div;
+
+	div = REG(pllbase + offset);
+	return (div & BIT(15)) ? (1 + (div & 0x1f)) : 1;
+}
+
+static inline unsigned pll_prediv(volatile void *pllbase)
+{
+#ifdef CONFIG_SOC_DM355
+	/* this register read seems to fail on pll0 */
+	if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
+		return 8;
+	else
+		return pll_div(pllbase, PLLC_PREDIV);
+#endif
+	return 1;
+}
+
+static inline unsigned pll_postdiv(volatile void *pllbase)
+{
+#ifdef CONFIG_SOC_DM355
+	return pll_div(pllbase, PLLC_POSTDIV);
+#elif defined(CONFIG_SOC_DM6446)
+	if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
+		return pll_div(pllbase, PLLC_POSTDIV);
+#endif
+	return 1;
+}
+
+static unsigned pll_sysclk_mhz(unsigned pll_addr, unsigned div)
+{
+	volatile void	*pllbase = (volatile void *) pll_addr;
+	unsigned	base = CONFIG_SYS_HZ_CLOCK / 1000;
+
+	/* the PLL might be bypassed */
+	if (REG(pllbase + PLLC_PLLCTL) & BIT(0)) {
+		base /= pll_prediv(pllbase);
+		base *= 1 + (REG(pllbase + PLLC_PLLM) & 0x0ff);
+		base /= pll_postdiv(pllbase);
+	}
+	return DIV_ROUND_UP(base, 1000 * pll_div(pllbase, div));
+}
+
+int print_cpuinfo(void)
+{
+	/* REVISIT fetch and display CPU ID and revision information
+	 * too ... that will matter as more revisions appear.
+	 */
+	printf("Cores: ARM %d MHz",
+			pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV));
+
+#ifdef DSP_PLLDIV
+	printf(", DSP %d MHz",
+			pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, DSP_PLLDIV));
+#endif
+
+	printf("\nDDR:   %d MHz\n",
+			/* DDR PHY uses an x2 input clock */
+			pll_sysclk_mhz(DAVINCI_PLL_CNTRL1_BASE, DDR_PLLDIV)
+				/ 2);
+	return 0;
+}
+
+#endif
+
diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h
index a28cfb4ae..99324e45c 100644
--- a/include/asm-arm/arch-davinci/hardware.h
+++ b/include/asm-arm/arch-davinci/hardware.h
@@ -175,11 +175,6 @@ void davinci_errata_workarounds(void);
 
 #define PSC_SILVER_BULLET		(0x01c41a20)
 
-/* Some PLL defines */
-#define PLL1_PLLM			(0x01c40910)
-#define PLL2_PLLM			(0x01c40d10)
-#define PLL2_DIV2			(0x01c40d1c)
-
 /* Miscellania... */
 #define VBPR				(0x20000020)
 
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index 9be10f76c..e936ba87b 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -52,6 +52,7 @@
 #define DV_EVM
 #define CONFIG_SYS_NAND_SMALLPAGE
 #define CONFIG_SYS_USE_NOR
+#define CONFIG_DISPLAY_CPUINFO
 /*===================*/
 /* SoC Configuration */
 /*===================*/
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index d5e77f8e1..6612cb3cb 100644
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -27,6 +27,7 @@
 #define SCHMOOGIE
 #define CONFIG_SYS_NAND_LARGEPAGE
 #define CONFIG_SYS_USE_NAND
+#define CONFIG_DISPLAY_CPUINFO
 /*===================*/
 /* SoC Configuration */
 /*===================*/
diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h
index 4be5b7e48..6c1dc117d 100644
--- a/include/configs/davinci_sffsdr.h
+++ b/include/configs/davinci_sffsdr.h
@@ -28,8 +28,8 @@
 #define SFFSDR
 #define CONFIG_SYS_NAND_LARGEPAGE
 #define CONFIG_SYS_USE_NAND
-#define CONFIG_SYS_USE_DSPLINK		/* This is to prevent U-Boot from
-				 * powering ON the DSP. */
+#define CONFIG_SYS_USE_DSPLINK		/* don't power up the DSP. */
+#define CONFIG_DISPLAY_CPUINFO
 /* SoC Configuration */
 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
 #define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
index a6bf8259b..893729c6f 100644
--- a/include/configs/davinci_sonata.h
+++ b/include/configs/davinci_sonata.h
@@ -52,6 +52,7 @@
 #define SONATA_BOARD
 #define CONFIG_SYS_NAND_SMALLPAGE
 #define CONFIG_SYS_USE_NOR
+#define CONFIG_DISPLAY_CPUINFO
 /*===================*/
 /* SoC Configuration */
 /*===================*/