diff options
| author | Wolfgang Denk <wd@denx.de> | 2011-11-16 20:24:51 +0100 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2011-11-16 20:24:51 +0100 |
| commit | 0e62e0a72cba76205c93b6913b9ae267f8fe08dc (patch) | |
| tree | 47ffbd76c315fbfc9024ed16927e0c58060d3af6 | |
| parent | f31f496e306489184c6963e0d56d0cf7b2c9cd0b (diff) | |
| parent | 0c2dd9a05bdcf3b2b4880509ec690116873fe158 (diff) | |
| download | olio-uboot-2014.01-0e62e0a72cba76205c93b6913b9ae267f8fe08dc.tar.xz olio-uboot-2014.01-0e62e0a72cba76205c93b6913b9ae267f8fe08dc.zip | |
Merge branch 'master' of /home/wd/git/u-boot/custodians
* 'master' of /home/wd/git/u-boot/custodians:
arm, davinci: add DAVINCI_MMC_CLKID
arm, davinci_emac: fix driver bug if more then 3 PHYs are detected
arm, davinci: da850/dm365 lowlevel cleanup
omap5: Add omap5_evm board build support.
omap4/5: Add support for booting with CH.
omap5: emif: Add emif/ddr configurations required for omap5 evm
omap5: clocks: Add clocks support for omap5 platform.
omap5: Add minimal support for omap5430.
omap: Checkpatch fixes
omap4: make omap4 code common for future reuse
GCC4.6: Squash warnings in onenand_base.c
GCC4.6: Fix common/usb.c on xscale
OneNAND: Add simple OneNAND SPL
PXA: vpac270: Enable the new generic MMC driver
PXA: Cleanup serial_pxa
PXA: Drop csb226 and innokom boards (unmaintained)
m28evk: Fix comment about the number of RAM banks
mx31: Fix checkpatch warnings in generic.c
mx31: Use proper IO accessor for GPR register
mx31: Remove duplicate definition for GPR register
qong: Use generic function for configuring GPR register
M28EVK: Enable USB HOST support
iMX28: Add USB HOST driver
iMX28: Add USB and USB PHY register definitions
M28: Add memory detection into SPL
iMX28: Fix ARM vector handling
M28: Add doc/README.m28 documentation
M28: Add MMC SPL
iMX28: Add support for DENX M28EVK board
iMX28: Add u-boot.sb target to Makefile
iMX28: Add image header generator tool
iMX28: Add driver for internal RTC
iMX28: Add GPMI NAND driver
iMX28: Add APBH DMA driver
iMX28: Add SPI driver
iMX28: Add GPIO control
iMX28: Add I2C bus driver
iMX28: Add PINMUX control
FEC: Add support for iMX28 quirks
iMX28: Add SSP MMC driver
iMX28: Initial support for iMX28 CPU
MX25: zmx25: GCC4.6 fix build warnings
da850: add new config file for AM18xx
BeagleBoard: config: Switch to ttyO2
OMAP3: Change omap3_evm maintainer
devkit8000: Fix NAND SPL on boards with 256MB NAND
integrator: enable Vpp and disable flash protection
integrator: add system controller header
integrator: make flash writeable on boot
integrator: use io-accessors for board init
integrator: move text offset to config
integrator: pass configs for core modules
ARM: remove superfluous setting of arch_number in board specific code.
SPL: Allow ARM926EJS to avoid compiling in the CPU support code
integrator: do not test first part of the memory
arm: a320: fix broken timer
ARM: define CONFIG_MACH_TYPE for all ronetix boards
dm646x: pass board revision info to kernel
dm646x: add new configuration for dm6467T
arm, davinci: Fix setting of the SDRAM configuration register
arm, davinci: Remove the duplication of LPSC functions
arm, davinci: Rename AM1808 lowlevel functions to DA850
da8xxevm: fix build error
ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
167 files changed, 21347 insertions, 6480 deletions
diff --git a/.gitignore b/.gitignore index 70a11f785..ff4bae008 100644 --- a/.gitignore +++ b/.gitignore @@ -36,6 +36,7 @@ /u-boot.lds /u-boot.ubl /u-boot.dtb +/u-boot.sb # # Generated files diff --git a/MAINTAINERS b/MAINTAINERS index 3c9dba7cb..94dcb7df2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -775,10 +775,6 @@ Dave Peverley <dpeverley@mpc-data.co.uk> omap730p2 ARM926EJS -Manikandan Pillai <mani.pillai@ti.com> - - omap3_evm ARM ARMV7 (OMAP3xx SoC) - Stelian Pop <stelian.pop@leadtechdesign.com> at91sam9260ek ARM926EJS (AT91SAM9260 SoC) @@ -786,6 +782,10 @@ Stelian Pop <stelian.pop@leadtechdesign.com> at91sam9263ek ARM926EJS (AT91SAM9263 SoC) at91sam9rlek ARM926EJS (AT91SAM9RL SoC) +Tom Rini <trini@ti.com> + + omap3_evm ARM ARMV7 (OMAP3xx SoC) + Tom Rix <Tom.Rix@windriver.com> omap3_zoom2 ARM ARMV7 (OMAP3xx SoC) @@ -817,11 +817,6 @@ Heiko Schocher <hs@denx.de> magnesium i.MX27 mgcoge3un ARM926EJS (Kirkwood SoC) -Robert Schwebel <r.schwebel@pengutronix.de> - - csb226 xscale/pxa - innokom xscale/pxa - Michael Schwingen <michael@schwingen.org> actux1 xscale/ixp @@ -850,6 +845,7 @@ Aneesh V <aneesh@ti.com> omap4_panda ARM ARMV7 (OMAP4xx SoC) omap4_sdp4430 ARM ARMV7 (OMAP4xx SoC) + omap5_evm ARM ARMV7 (OMAP5xx Soc) Marek Vasut <marek.vasut@gmail.com> @@ -859,6 +855,7 @@ Marek Vasut <marek.vasut@gmail.com> palmtc xscale/pxa vpac270 xscale/pxa zipitz2 xscale/pxa + m28evk i.MX28 efikamx i.MX51 efikasb i.MX51 @@ -290,16 +290,9 @@ LIBS += lib/libfdt/libfdt.o LIBS += api/libapi.o LIBS += post/libpost.o -ifeq ($(SOC),am33xx) +ifneq ($(CONFIG_AM335X)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) LIBS += $(CPUDIR)/omap-common/libomap-common.o endif -ifeq ($(SOC),omap3) -LIBS += $(CPUDIR)/omap-common/libomap-common.o -endif -ifeq ($(SOC),omap4) -LIBS += $(CPUDIR)/omap-common/libomap-common.o -endif - ifeq ($(SOC),s5pc1xx) LIBS += $(CPUDIR)/s5p-common/libs5p-common.o endif @@ -424,6 +417,10 @@ $(obj)u-boot.ubl: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin rm $(obj)u-boot-ubl.bin rm $(obj)spl/u-boot-spl-pad.bin +$(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin + elftosb -zdf imx28 -c $(TOPDIR)/board/$(BOARDDIR)/u-boot.bd \ + -o $(obj)u-boot.sb + ifeq ($(CONFIG_SANDBOX),y) GEN_UBOOT = \ cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \ @@ -791,6 +788,7 @@ clobber: clean @rm -f $(obj)u-boot.imx @rm -f $(obj)u-boot.ubl @rm -f $(obj)u-boot.dtb + @rm -f $(obj)u-boot.sb @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes} @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c @rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm @@ -1027,6 +1027,12 @@ The following options need to be configured: Define this to use i/o functions instead of macros (some hardware wont work with macros) + CONFIG_DRIVER_TI_EMAC + Support for davinci emac + + CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT + Define this if you have more then 3 PHYs. + CONFIG_FTGMAC100 Support for Faraday's FTGMAC100 Gigabit SoC Ethernet diff --git a/arch/arm/cpu/arm1136/mx31/generic.c b/arch/arm/cpu/arm1136/mx31/generic.c index 4f27e250b..f45828141 100644 --- a/arch/arm/cpu/arm1136/mx31/generic.c +++ b/arch/arm/cpu/arm1136/mx31/generic.c @@ -27,8 +27,6 @@ #include <asm/io.h> #include <asm/arch/sys_proto.h> -#define IOMUXGPR (IOMUXC_BASE + 0x008) - static u32 mx31_decode_pll(u32 reg, u32 infreq) { u32 mfi = GET_PLL_MFI(reg); @@ -89,7 +87,7 @@ static u32 mx31_get_hsp_clk(void) void mx31_dump_clocks(void) { u32 cpufreq = mx31_get_mcu_main_clk(); - printf("mx31 cpu clock: %dMHz\n",cpufreq / 1000000); + printf("mx31 cpu clock: %dMHz\n", cpufreq / 1000000); printf("ipg clock : %dHz\n", mx31_get_ipg_clk()); printf("hsp clock : %dHz\n", mx31_get_hsp_clk()); } @@ -146,14 +144,15 @@ void mx31_set_pad(enum iomux_pins pin, u32 config) void mx31_set_gpr(enum iomux_gp_func gp, char en) { u32 l; + struct iomuxc_regs *iomuxc = (struct iomuxc_regs *)IOMUXC_BASE; - l = readl(IOMUXGPR); + l = readl(&iomuxc->gpr); if (en) l |= gp; else l &= ~gp; - writel(l, IOMUXGPR); + writel(l, &iomuxc->gpr); } void mxc_setup_weimcs(int cs, const struct mxc_weimcs *weimcs) @@ -216,7 +215,7 @@ static char *get_reset_cause(void) } #if defined(CONFIG_DISPLAY_CPUINFO) -int print_cpuinfo (void) +int print_cpuinfo(void) { u32 srev = get_cpu_rev(); diff --git a/arch/arm/cpu/arm920t/a320/timer.c b/arch/arm/cpu/arm920t/a320/timer.c index 443d31d22..4bfcef237 100644 --- a/arch/arm/cpu/arm920t/a320/timer.c +++ b/arch/arm/cpu/arm920t/a320/timer.c @@ -18,20 +18,35 @@ */ #include <common.h> +#include <div64.h> #include <asm/io.h> #include <faraday/ftpmu010.h> #include <faraday/fttmr010.h> -static ulong timestamp; -static ulong lastdec; - -static struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE; +DECLARE_GLOBAL_DATA_PTR; #define TIMER_CLOCK 32768 #define TIMER_LOAD_VAL 0xffffffff +static inline unsigned long long tick_to_time(unsigned long long tick) +{ + tick *= CONFIG_SYS_HZ; + do_div(tick, gd->timer_rate_hz); + + return tick; +} + +static inline unsigned long long usec_to_tick(unsigned long long usec) +{ + usec *= gd->timer_rate_hz; + do_div(usec, 1000000); + + return usec; +} + int timer_init(void) { + struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE; unsigned int cr; debug("%s()\n", __func__); @@ -59,106 +74,57 @@ int timer_init(void) cr |= FTTMR010_TM3_ENABLE; writel(cr, &tmr->cr); - /* init the timestamp and lastdec value */ - reset_timer_masked(); + gd->timer_rate_hz = TIMER_CLOCK; + gd->tbu = gd->tbl = 0; return 0; } /* - * timer without interrupts - */ - -/* - * reset time - */ -void reset_timer_masked(void) -{ - /* capure current decrementer value time */ - lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ); - timestamp = 0; /* start "advancing" time stamp from 0 */ - - debug("%s(): lastdec = %lx\n", __func__, lastdec); -} - -/* - * return timer ticks + * Get the current 64 bit timer tick count */ -ulong get_timer_masked(void) +unsigned long long get_ticks(void) { - /* current tick value */ - ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ); - - debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec); - - if (lastdec >= now) { - /* - * normal mode (non roll) - * move stamp fordward with absoulte diff ticks - */ - timestamp += lastdec - now; - } else { - /* - * we have overflow of the count down timer - * - * nts = ts + ld + (TLV - now) - * ts=old stamp, ld=time that passed before passing through -1 - * (TLV-now) amount of time after passing though -1 - * nts = new "advancing time stamp"...it could also roll and - * cause problems. - */ - timestamp += lastdec + TIMER_LOAD_VAL - now; - } - - lastdec = now; - - debug("%s() returns %lx\n", __func__, timestamp); + struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE; + ulong now = TIMER_LOAD_VAL - readl(&tmr->timer3_counter); - return timestamp; + /* increment tbu if tbl has rolled over */ + if (now < gd->tbl) + gd->tbu++; + gd->tbl = now; + return (((unsigned long long)gd->tbu) << 32) | gd->tbl; } -/* - * return difference between timer ticks and base - */ -ulong get_timer(ulong base) -{ - debug("%s(%lx)\n", __func__, base); - return get_timer_masked() - base; -} - -/* delay x useconds AND preserve advance timestamp value */ void __udelay(unsigned long usec) { - long tmo = usec * (TIMER_CLOCK / 1000) / 1000; - unsigned long now, last = readl(&tmr->timer3_counter); + unsigned long long start; + ulong tmo; - debug("%s(%lu)\n", __func__, usec); - while (tmo > 0) { - now = readl(&tmr->timer3_counter); - if (now > last) /* count down timer overflow */ - tmo -= TIMER_LOAD_VAL + last - now; - else - tmo -= last - now; - last = now; - } + start = get_ticks(); /* get current timestamp */ + tmo = usec_to_tick(usec); /* convert usecs to ticks */ + while ((get_ticks() - start) < tmo) + ; /* loop till time has passed */ } /* - * This function is derived from PowerPC code (read timebase as long long). - * On ARM it just returns the timer value. + * get_timer(base) can be used to check for timeouts or + * to measure elasped time relative to an event: + * + * ulong start_time = get_timer(0) sets start_time to the current + * time value. + * get_timer(start_time) returns the time elapsed since then. + * + * The time is used in CONFIG_SYS_HZ units! */ -unsigned long long get_ticks(void) +ulong get_timer(ulong base) { - debug("%s()\n", __func__); - return get_timer(0); + return tick_to_time(get_ticks()) - base; } /* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. + * Return the number of timer ticks per second. */ ulong get_tbclk(void) { - debug("%s()\n", __func__); - return CONFIG_SYS_HZ; + return gd->timer_rate_hz; } diff --git a/arch/arm/cpu/arm926ejs/Makefile b/arch/arm/cpu/arm926ejs/Makefile index 930e0d1bf..a56ff08c9 100644 --- a/arch/arm/cpu/arm926ejs/Makefile +++ b/arch/arm/cpu/arm926ejs/Makefile @@ -28,6 +28,12 @@ LIB = $(obj)lib$(CPU).o START = start.o COBJS = cpu.o +ifdef CONFIG_SPL_BUILD +ifdef CONFIG_SPL_NO_CPU_SUPPORT_CODE +START := +endif +endif + SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) START := $(addprefix $(obj),$(START)) diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/cpu/arm926ejs/davinci/Makefile index 98c7e55c4..aeb058acd 100644 --- a/arch/arm/cpu/arm926ejs/davinci/Makefile +++ b/arch/arm/cpu/arm926ejs/davinci/Makefile @@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o COBJS-y += cpu.o timer.o psc.o -COBJS-$(CONFIG_AM18018_LOWLEVEL) += am1808_lowlevel.o +COBJS-$(CONFIG_DA850_LOWLEVEL) += da850_lowlevel.o COBJS-$(CONFIG_SOC_DM355) += dm355.o COBJS-$(CONFIG_SOC_DM365) += dm365.o COBJS-$(CONFIG_SOC_DM644X) += dm644x.o diff --git a/arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c deleted file mode 100644 index 1ea4a9ffc..000000000 --- a/arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c +++ /dev/null @@ -1,428 +0,0 @@ -/* - * SoC-specific lowlevel code for AM1808 and similar chips - * - * Copyright (C) 2011 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <common.h> -#include <nand.h> -#include <ns16550.h> -#include <post.h> -#include <asm/arch/am1808_lowlevel.h> -#include <asm/arch/hardware.h> -#include <asm/arch/ddr2_defs.h> -#include <asm/arch/emif_defs.h> - -void am1808_waitloop(unsigned long loopcnt) -{ - unsigned long i; - - for (i = 0; i < loopcnt; i++) - asm(" NOP"); -} - -int am1808_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult) -{ - if (reg == davinci_pllc0_regs) - /* Unlock PLL registers. */ - clrbits_le32(&davinci_syscfg_regs->cfgchip0, 0x00000010); - - /* - * Set PLLENSRC '0',bit 5, PLL Enable(PLLEN) selection is controlled - * through MMR - */ - clrbits_le32(®->pllctl, 0x00000020); - /* PLLCTL.EXTCLKSRC bit 9 should be left at 0 for Freon */ - clrbits_le32(®->pllctl, 0x00000200); - - /* Set PLLEN=0 => PLL BYPASS MODE */ - clrbits_le32(®->pllctl, 0x00000001); - - am1808_waitloop(150); - - if (reg == davinci_pllc0_regs) { - /* - * Select the Clock Mode bit 8 as External Clock or On Chip - * Oscilator - */ - dv_maskbits(®->pllctl, 0xFFFFFEFF); - setbits_le32(®->pllctl, (CONFIG_SYS_DV_CLKMODE << 8)); - } - - /* Clear PLLRST bit to reset the PLL */ - clrbits_le32(®->pllctl, 0x00000008); - - /* Disable the PLL output */ - setbits_le32(®->pllctl, 0x00000010); - - /* PLL initialization sequence */ - /* - * Power up the PLL- PWRDN bit set to 0 to bring the PLL out of - * power down bit - */ - clrbits_le32(®->pllctl, 0x00000002); - - /* Enable the PLL from Disable Mode PLLDIS bit to 0 */ - clrbits_le32(®->pllctl, 0x00000010); - - /* Program the required multiplier value in PLLM */ - writel(pllmult, ®->pllm); - - /* program the postdiv */ - if (reg == davinci_pllc0_regs) - writel((0x8000 | CONFIG_SYS_AM1808_PLL0_POSTDIV), - ®->postdiv); - else - writel((0x8000 | CONFIG_SYS_AM1808_PLL1_POSTDIV), - ®->postdiv); - - /* - * Check for the GOSTAT bit in PLLSTAT to clear to 0 to indicate that - * no GO operation is currently in progress - */ - while ((readl(®->pllstat) & 0x1) == 1) - ; - - if (reg == davinci_pllc0_regs) { - writel(CONFIG_SYS_AM1808_PLL0_PLLDIV1, ®->plldiv1); - writel(CONFIG_SYS_AM1808_PLL0_PLLDIV2, ®->plldiv2); - writel(CONFIG_SYS_AM1808_PLL0_PLLDIV3, ®->plldiv3); - writel(CONFIG_SYS_AM1808_PLL0_PLLDIV4, ®->plldiv4); - writel(CONFIG_SYS_AM1808_PLL0_PLLDIV5, ®->plldiv5); - writel(CONFIG_SYS_AM1808_PLL0_PLLDIV6, ®->plldiv6); - writel(CONFIG_SYS_AM1808_PLL0_PLLDIV7, ®->plldiv7); - } else { - writel(CONFIG_SYS_AM1808_PLL1_PLLDIV1, ®->plldiv1); - writel(CONFIG_SYS_AM1808_PLL1_PLLDIV2, ®->plldiv2); - writel(CONFIG_SYS_AM1808_PLL1_PLLDIV3, ®->plldiv3); - } - - /* - * Set the GOSET bit in PLLCMD to 1 to initiate a new divider - * transition. - */ - setbits_le32(®->pllcmd, 0x01); - - /* - * Wait for the GOSTAT bit in PLLSTAT to clear to 0 - * (completion of phase alignment). - */ - while ((readl(®->pllstat) & 0x1) == 1) - ; - - /* Wait for PLL to reset properly. See PLL spec for PLL reset time */ - am1808_waitloop(200); - - /* Set the PLLRST bit in PLLCTL to 1 to bring the PLL out of reset */ - setbits_le32(®->pllctl, 0x00000008); - - /* Wait for PLL to lock. See PLL spec for PLL lock time */ - am1808_waitloop(2400); - - /* - * Set the PLLEN bit in PLLCTL to 1 to remove the PLL from bypass - * mode - */ - setbits_le32(®->pllctl, 0x00000001); - - - /* - * clear EMIFA and EMIFB clock source settings, let them - * run off SYSCLK - */ - if (reg == davinci_pllc0_regs) - dv_maskbits(&davinci_syscfg_regs->cfgchip3, 0xFFFFFFF8); - - return 0; -} - -void am1808_lpc_transition(unsigned char pscnum, unsigned char module, - unsigned char domain, unsigned char state) -{ - struct davinci_psc_regs *reg; - dv_reg_p mdstat, mdctl; - - if (pscnum == 0) { - reg = davinci_psc0_regs; - mdstat = ®->psc0.mdstat[module]; - mdctl = ®->psc0.mdctl[module]; - } else { - reg = davinci_psc1_regs; - mdstat = ®->psc1.mdstat[module]; - mdctl = ®->psc1.mdctl[module]; - } - - /* Wait for any outstanding transition to complete */ - while ((readl(®->ptstat) & (0x00000001 << domain))) - ; - - /* If we are already in that state, just return */ - if ((readl(mdstat) & 0x1F) == state) - return; - - /* Perform transition */ - writel((readl(mdctl) & 0xFFFFFFE0) | state, mdctl); - setbits_le32(®->ptcmd, (0x00000001 << domain)); - - /* Wait for transition to complete */ - while (readl(®->ptstat) & (0x00000001 << domain)) - ; - - /* Wait and verify the state */ - while ((readl(mdstat) & 0x1F) != state) - ; -} - -int am1808_ddr_setup(unsigned int freq) -{ - unsigned long tmp; - - /* Enable the Clock to DDR2/mDDR */ - am1808_lpc_transition(1, 6, 0, PSC_ENABLE); - - tmp = readl(&davinci_syscfg1_regs->vtpio_ctl); - if ((tmp & VTP_POWERDWN) == VTP_POWERDWN) { - /* Begin VTP Calibration */ - clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN); - clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK); - setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ); - clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ); - setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ); - - /* Polling READY bit to see when VTP calibration is done */ - tmp = readl(&davinci_syscfg1_regs->vtpio_ctl); - while ((tmp & VTP_READY) != VTP_READY) - tmp = readl(&davinci_syscfg1_regs->vtpio_ctl); - - setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK); - setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN); - - setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN); - } - - writel(CONFIG_SYS_AM1808_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr); - clrbits_le32(&davinci_syscfg1_regs->ddr_slew, - (1 << DDR_SLEW_CMOSEN_BIT)); - - setbits_le32(&dv_ddr2_regs_ctrl->sdbcr, DV_DDR_BOOTUNLOCK); - - writel((CONFIG_SYS_AM1808_DDR2_SDBCR & ~0xf0000000) | - (readl(&dv_ddr2_regs_ctrl->sdbcr) & 0xf0000000), /*rsv Bytes*/ - &dv_ddr2_regs_ctrl->sdbcr); - writel(CONFIG_SYS_AM1808_DDR2_SDBCR2, &dv_ddr2_regs_ctrl->sdbcr2); - - writel(CONFIG_SYS_AM1808_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr); - writel(CONFIG_SYS_AM1808_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2); - - clrbits_le32(&dv_ddr2_regs_ctrl->sdbcr, - (1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT)); - - /* - * LPMODEN and MCLKSTOPEN must be set! - * Without this bits set, PSC don;t switch states !! - */ - writel(CONFIG_SYS_AM1808_DDR2_SDRCR | - (1 << DV_DDR_SRCR_LPMODEN_SHIFT) | - (1 << DV_DDR_SRCR_MCLKSTOPEN_SHIFT), - &dv_ddr2_regs_ctrl->sdrcr); - - /* SyncReset the Clock to EMIF3A SDRAM */ - am1808_lpc_transition(1, 6, 0, PSC_SYNCRESET); - /* Enable the Clock to EMIF3A SDRAM */ - am1808_lpc_transition(1, 6, 0, PSC_ENABLE); - - /* disable self refresh */ - clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr, 0xc0000000); - writel(0x30, &dv_ddr2_regs_ctrl->pbbpr); - - return 0; -} - -static void am1808_set_mdctl(dv_reg_p mdctl) -{ - if ((readl(mdctl) & 0x1F) != PSC_ENABLE) - writel(((readl(mdctl) & 0xFFFFFFE0) | PSC_ENABLE), mdctl); -} - -void am1808_psc_init(void) -{ - struct davinci_psc_regs *reg; - int i; - - /* PSC 0 domain 0 init */ - reg = davinci_psc0_regs; - while ((readl(®->ptstat) & 0x00000001)) - ; - - for (i = 3; i <= 4 ; i++) - am1808_set_mdctl(®->psc0.mdctl[i]); - - for (i = 7; i <= 12 ; i++) - am1808_set_mdctl(®->psc0.mdctl[i]); - - /* Do Always-On Power Domain Transitions */ - setbits_le32(®->ptcmd, 0x00000001); - while (readl(®->ptstat) & 0x00000001) - ; - - /* PSC1, domain 1 init */ - reg = davinci_psc1_regs; - while ((readl(®->ptstat) & 0x00000001)) - ; - - am1808_set_mdctl(®->psc1.mdctl[3]); - am1808_set_mdctl(®->psc1.mdctl[6]); - - /* UART1 + UART2 */ - for (i = 12 ; i <= 13 ; i++) - am1808_set_mdctl(®->psc1.mdctl[i]); - - am1808_set_mdctl(®->psc1.mdctl[26]); - am1808_set_mdctl(®->psc1.mdctl[31]); - - /* Do Always-On Power Domain Transitions */ - setbits_le32(®->ptcmd, 0x00000001); - while (readl(®->ptstat) & 0x00000001) - ; -} - -void am1808_pinmux_ctl(unsigned long offset, unsigned long mask, - unsigned long value) -{ - clrbits_le32(&davinci_syscfg_regs->pinmux[offset], mask); - setbits_le32(&davinci_syscfg_regs->pinmux[offset], (mask & value)); -} - -__attribute__((weak)) -void board_gpio_init(void) -{ - return; -} - -#if defined(CONFIG_NAND_SPL) -void nand_boot(void) -{ - __attribute__((noreturn)) void (*uboot)(void); - - /* copy image from NOR to RAM */ - memcpy((void *)CONFIG_SYS_NAND_U_BOOT_DST, - (void *)CONFIG_SYS_NAND_U_BOOT_OFFS, - CONFIG_SYS_NAND_U_BOOT_SIZE); - - /* and jump to it ... */ - uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; - (*uboot)(); -} -#endif - -#if defined(CONFIG_NAND_SPL) -void board_init_f(ulong bootflag) -#else -int arch_cpu_init(void) -#endif -{ - /* - * copied from arch/arm/cpu/arm926ejs/start.S - * - * flush v4 I/D caches - */ - asm("mov r0, #0"); - asm("mcr p15, 0, r0, c7, c7, 0"); /* flush v3/v4 cache */ - asm("mcr p15, 0, r0, c8, c7, 0"); /* flush v4 TLB */ - - /* - * disable MMU stuff and caches - */ - asm("mrc p15, 0, r0, c1, c0, 0"); - /* clear bits 13, 9:8 (--V- --RS) */ - asm("bic r0, r0, #0x00002300"); - /* clear bits 7, 2:0 (B--- -CAM) */ - asm("bic r0, r0, #0x00000087"); - /* set bit 2 (A) Align */ - asm("orr r0, r0, #0x00000002"); - /* set bit 12 (I) I-Cache */ - asm("orr r0, r0, #0x00001000"); - asm("mcr p15, 0, r0, c1, c0, 0"); - - /* Unlock kick registers */ - writel(0x83e70b13, &davinci_syscfg_regs->kick0); - writel(0x95a4f1e0, &davinci_syscfg_regs->kick1); - - dv_maskbits(&davinci_syscfg_regs->suspsrc, - ((1 << 27) | (1 << 22) | (1 << 20) | (1 << 5) | (1 << 16))); - - /* System PSC setup - enable all */ - am1808_psc_init(); - - /* Setup Pinmux */ - am1808_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX0); - am1808_pinmux_ctl(1, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX1); - am1808_pinmux_ctl(2, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX2); - am1808_pinmux_ctl(3, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX3); - am1808_pinmux_ctl(4, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX4); - am1808_pinmux_ctl(5, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX5); - am1808_pinmux_ctl(6, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX6); - am1808_pinmux_ctl(7, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX7); - am1808_pinmux_ctl(8, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX8); - am1808_pinmux_ctl(9, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX9); - am1808_pinmux_ctl(10, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX10); - am1808_pinmux_ctl(11, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX11); - am1808_pinmux_ctl(12, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX12); - am1808_pinmux_ctl(13, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX13); - am1808_pinmux_ctl(14, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX14); - am1808_pinmux_ctl(15, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX15); - am1808_pinmux_ctl(16, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX16); - am1808_pinmux_ctl(17, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX17); - am1808_pinmux_ctl(18, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX18); - am1808_pinmux_ctl(19, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX19); - - /* PLL setup */ - am1808_pll_init(davinci_pllc0_regs, CONFIG_SYS_AM1808_PLL0_PLLM); - am1808_pll_init(davinci_pllc1_regs, CONFIG_SYS_AM1808_PLL1_PLLM); - - /* GPIO setup */ - board_gpio_init(); - - /* setup CSn config */ - writel(CONFIG_SYS_AM1808_CS2CFG, &davinci_emif_regs->ab1cr); - writel(CONFIG_SYS_AM1808_CS3CFG, &davinci_emif_regs->ab2cr); - - am1808_lpc_transition(1, 13, 0, PSC_ENABLE); - NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1), - CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); - - /* - * Fix Power and Emulation Management Register - * see sprufw3a.pdf page 37 Table 24 - */ - writel(readl((CONFIG_SYS_NS16550_COM1 + 0x30)) | 0x00006001, - (CONFIG_SYS_NS16550_COM1 + 0x30)); -#if defined(CONFIG_NAND_SPL) - puts("ddr init\n"); - am1808_ddr_setup(132); - - puts("boot u-boot ...\n"); - - nand_boot(); -#else - am1808_ddr_setup(132); - return 0; -#endif -} diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c new file mode 100644 index 000000000..c7ec70f8c --- /dev/null +++ b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c @@ -0,0 +1,311 @@ +/* + * SoC-specific lowlevel code for DA850 + * + * Copyright (C) 2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <common.h> +#include <nand.h> +#include <ns16550.h> +#include <post.h> +#include <asm/arch/da850_lowlevel.h> +#include <asm/arch/hardware.h> +#include <asm/arch/ddr2_defs.h> +#include <asm/arch/emif_defs.h> +#include <asm/arch/pll_defs.h> + +void da850_waitloop(unsigned long loopcnt) +{ + unsigned long i; + + for (i = 0; i < loopcnt; i++) + asm(" NOP"); +} + +int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult) +{ + if (reg == davinci_pllc0_regs) + /* Unlock PLL registers. */ + clrbits_le32(&davinci_syscfg_regs->cfgchip0, PLL_MASTER_LOCK); + + /* + * Set PLLENSRC '0',bit 5, PLL Enable(PLLEN) selection is controlled + * through MMR + */ + clrbits_le32(®->pllctl, PLLCTL_PLLENSRC); + /* PLLCTL.EXTCLKSRC bit 9 should be left at 0 for Freon */ + clrbits_le32(®->pllctl, PLLCTL_EXTCLKSRC); + + /* Set PLLEN=0 => PLL BYPASS MODE */ + clrbits_le32(®->pllctl, PLLCTL_PLLEN); + + da850_waitloop(150); + + if (reg == davinci_pllc0_regs) { + /* + * Select the Clock Mode bit 8 as External Clock or On Chip + * Oscilator + */ + dv_maskbits(®->pllctl, ~PLLCTL_RES_9); + setbits_le32(®->pllctl, + (CONFIG_SYS_DV_CLKMODE << PLLCTL_CLOCK_MODE_SHIFT)); + } + + /* Clear PLLRST bit to reset the PLL */ + clrbits_le32(®->pllctl, PLLCTL_PLLRST); + + /* Disable the PLL output */ + setbits_le32(®->pllctl, PLLCTL_PLLDIS); + + /* PLL initialization sequence */ + /* + * Power up the PLL- PWRDN bit set to 0 to bring the PLL out of + * power down bit + */ + clrbits_le32(®->pllctl, PLLCTL_PLLPWRDN); + + /* Enable the PLL from Disable Mode PLLDIS bit to 0 */ + clrbits_le32(®->pllctl, PLLCTL_PLLDIS); + + /* Program the required multiplier value in PLLM */ + writel(pllmult, ®->pllm); + + /* program the postdiv */ + if (reg == davinci_pllc0_regs) + writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL0_POSTDIV), + ®->postdiv); + else + writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL1_POSTDIV), + ®->postdiv); + + /* + * Check for the GOSTAT bit in PLLSTAT to clear to 0 to indicate that + * no GO operation is currently in progress + */ + while ((readl(®->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT) + ; + + if (reg == davinci_pllc0_regs) { + writel(CONFIG_SYS_DA850_PLL0_PLLDIV1, ®->plldiv1); + writel(CONFIG_SYS_DA850_PLL0_PLLDIV2, ®->plldiv2); + writel(CONFIG_SYS_DA850_PLL0_PLLDIV3, ®->plldiv3); + writel(CONFIG_SYS_DA850_PLL0_PLLDIV4, ®->plldiv4); + writel(CONFIG_SYS_DA850_PLL0_PLLDIV5, ®->plldiv5); + writel(CONFIG_SYS_DA850_PLL0_PLLDIV6, ®->plldiv6); + writel(CONFIG_SYS_DA850_PLL0_PLLDIV7, ®->plldiv7); + } else { + writel(CONFIG_SYS_DA850_PLL1_PLLDIV1, ®->plldiv1); + writel(CONFIG_SYS_DA850_PLL1_PLLDIV2, ®->plldiv2); + writel(CONFIG_SYS_DA850_PLL1_PLLDIV3, ®->plldiv3); + } + + /* + * Set the GOSET bit in PLLCMD to 1 to initiate a new divider + * transition. + */ + setbits_le32(®->pllcmd, PLLCMD_GOSTAT); + + /* + * Wait for the GOSTAT bit in PLLSTAT to clear to 0 + * (completion of phase alignment). + */ + while ((readl(®->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT) + ; + + /* Wait for PLL to reset properly. See PLL spec for PLL reset time */ + da850_waitloop(200); + + /* Set the PLLRST bit in PLLCTL to 1 to bring the PLL out of reset */ + setbits_le32(®->pllctl, PLLCTL_PLLRST); + + /* Wait for PLL to lock. See PLL spec for PLL lock time */ + da850_waitloop(2400); + + /* + * Set the PLLEN bit in PLLCTL to 1 to remove the PLL from bypass + * mode + */ + setbits_le32(®->pllctl, PLLCTL_PLLEN); + + + /* + * clear EMIFA and EMIFB clock source settings, let them + * run off SYSCLK + */ + if (reg == davinci_pllc0_regs) + dv_maskbits(&davinci_syscfg_regs->cfgchip3, + ~(PLL_SCSCFG3_DIV45PENA | PLL_SCSCFG3_EMA_CLKSRC)); + + return 0; +} + +int da850_ddr_setup(void) +{ + unsigned long tmp; + + /* Enable the Clock to DDR2/mDDR */ + lpsc_on(DAVINCI_LPSC_DDR_EMIF); + + tmp = readl(&davinci_syscfg1_regs->vtpio_ctl); + if ((tmp & VTP_POWERDWN) == VTP_POWERDWN) { + /* Begin VTP Calibration */ + clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN); + clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK); + setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ); + clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ); + setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ); + + /* Polling READY bit to see when VTP calibration is done */ + tmp = readl(&davinci_syscfg1_regs->vtpio_ctl); + while ((tmp & VTP_READY) != VTP_READY) + tmp = readl(&davinci_syscfg1_regs->vtpio_ctl); + + setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK); + setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN); + + setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN); + } + + writel(CONFIG_SYS_DA850_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr); + clrbits_le32(&davinci_syscfg1_regs->ddr_slew, + (1 << DDR_SLEW_CMOSEN_BIT)); + + /* + * SDRAM Configuration Register (SDCR): + * First set the BOOTUNLOCK bit to make configuration bits + * writeable. + */ + setbits_le32(&dv_ddr2_regs_ctrl->sdbcr, DV_DDR_BOOTUNLOCK); + + /* + * Write the new value of these bits and clear BOOTUNLOCK. + * At the same time, set the TIMUNLOCK bit to allow changing + * the timing registers + */ + tmp = CONFIG_SYS_DA850_DDR2_SDBCR; + tmp &= ~DV_DDR_BOOTUNLOCK; + tmp |= DV_DDR_TIMUNLOCK; + writel(tmp, &dv_ddr2_regs_ctrl->sdbcr); + + /* write memory configuration and timing */ + writel(CONFIG_SYS_DA850_DDR2_SDBCR2, &dv_ddr2_regs_ctrl->sdbcr2); + writel(CONFIG_SYS_DA850_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr); + writel(CONFIG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2); + + /* clear the TIMUNLOCK bit and write the value of the CL field */ + tmp &= ~DV_DDR_TIMUNLOCK; + writel(tmp, &dv_ddr2_regs_ctrl->sdbcr); + + /* + * LPMODEN and MCLKSTOPEN must be set! + * Without this bits set, PSC don;t switch states !! + */ + writel(CONFIG_SYS_DA850_DDR2_SDRCR | + (1 << DV_DDR_SRCR_LPMODEN_SHIFT) | + (1 << DV_DDR_SRCR_MCLKSTOPEN_SHIFT), + &dv_ddr2_regs_ctrl->sdrcr); + + /* SyncReset the Clock to EMIF3A SDRAM */ + lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF); + /* Enable the Clock to EMIF3A SDRAM */ + lpsc_on(DAVINCI_LPSC_DDR_EMIF); + + /* disable self refresh */ + clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr, + DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_LPMODEN); + writel(CONFIG_SYS_DA850_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr); + + return 0; +} + +void da850_pinmux_ctl(unsigned long offset, unsigned long mask, + unsigned long value) +{ + clrbits_le32(&davinci_syscfg_regs->pinmux[offset], mask); + setbits_le32(&davinci_syscfg_regs->pinmux[offset], (mask & value)); +} + +__attribute__((weak)) +void board_gpio_init(void) +{ + return; +} + +int arch_cpu_init(void) +{ + /* Unlock kick registers */ + writel(DV_SYSCFG_KICK0_UNLOCK, &davinci_syscfg_regs->kick0); + writel(DV_SYSCFG_KICK1_UNLOCK, &davinci_syscfg_regs->kick1); + + dv_maskbits(&davinci_syscfg_regs->suspsrc, + CONFIG_SYS_DA850_SYSCFG_SUSPSRC); + + /* Setup Pinmux */ + da850_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX0); + da850_pinmux_ctl(1, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX1); + da850_pinmux_ctl(2, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX2); + da850_pinmux_ctl(3, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX3); + da850_pinmux_ctl(4, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX4); + da850_pinmux_ctl(5, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX5); + da850_pinmux_ctl(6, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX6); + da850_pinmux_ctl(7, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX7); + da850_pinmux_ctl(8, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX8); + da850_pinmux_ctl(9, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX9); + da850_pinmux_ctl(10, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX10); + da850_pinmux_ctl(11, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX11); + da850_pinmux_ctl(12, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX12); + da850_pinmux_ctl(13, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX13); + da850_pinmux_ctl(14, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX14); + da850_pinmux_ctl(15, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX15); + da850_pinmux_ctl(16, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX16); + da850_pinmux_ctl(17, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX17); + da850_pinmux_ctl(18, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX18); + da850_pinmux_ctl(19, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX19); + + /* PLL setup */ + da850_pll_init(davinci_pllc0_regs, CONFIG_SYS_DA850_PLL0_PLLM); + da850_pll_init(davinci_pllc1_regs, CONFIG_SYS_DA850_PLL1_PLLM); + + /* GPIO setup */ + board_gpio_init(); + + /* setup CSn config */ +#if defined(CONFIG_SYS_DA850_CS2CFG) + writel(CONFIG_SYS_DA850_CS2CFG, &davinci_emif_regs->ab1cr); +#endif +#if defined(CONFIG_SYS_DA850_CS3CFG) + writel(CONFIG_SYS_DA850_CS3CFG, &davinci_emif_regs->ab2cr); +#endif + + lpsc_on(CONFIG_SYS_DA850_LPSC_UART); + NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1), + CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); + + /* + * Fix Power and Emulation Management Register + * see sprufw3a.pdf page 37 Table 24 + */ + writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | + DAVINCI_UART_PWREMU_MGMT_UTRST), + &davinci_uart2_ctrl_regs->pwremu_mgmt); + + da850_ddr_setup(); + return 0; +} diff --git a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c index 3772e64cc..6e998ded9 100644 --- a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c +++ b/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c @@ -45,7 +45,8 @@ int dm365_pll1_init(unsigned long pllmult, unsigned long prediv) clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLPWRDN); clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_RES_9); - setbits_le32(&dv_pll0_regs->pllctl, clksrc << 8); + setbits_le32(&dv_pll0_regs->pllctl, + clksrc << PLLCTL_CLOCK_MODE_SHIFT); /* * Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled @@ -82,7 +83,7 @@ int dm365_pll1_init(unsigned long pllmult, unsigned long prediv) writel(PLLSECCTL_STOPMODE | PLLSECCTL_TINITZ, &dv_pll0_regs->secctl); /* Program the PostDiv for PLL1 */ - writel(0x8000, &dv_pll0_regs->postdiv); + writel(PLL_POSTDEN, &dv_pll0_regs->postdiv); /* Post divider setting for PLL1 */ writel(CONFIG_SYS_DM36x_PLL1_PLLDIV1, &dv_pll0_regs->plldiv1); @@ -126,7 +127,8 @@ int dm365_pll2_init(unsigned long pllm, unsigned long prediv) * VDB has input on MXI pin */ clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_RES_9); - setbits_le32(&dv_pll1_regs->pllctl, clksrc << 8); + setbits_le32(&dv_pll1_regs->pllctl, + clksrc << PLLCTL_CLOCK_MODE_SHIFT); /* * Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled @@ -151,7 +153,7 @@ int dm365_pll2_init(unsigned long pllm, unsigned long prediv) writel(pllm, &dv_pll1_regs->pllm); writel(prediv, &dv_pll1_regs->prediv); - writel(0x8000, &dv_pll1_regs->postdiv); + writel(PLL_POSTDEN, &dv_pll1_regs->postdiv); /* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 1 */ writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE | @@ -261,21 +263,23 @@ void dm365_vpss_sync_reset(void) VPSS_CLK_CTL_VPSS_CLKMD); /* LPSC SyncReset DDR Clock Enable */ - writel(((readl(&dv_psc_regs->mdctl[47]) & ~PSC_MD_STATE_MSK) | - PSC_SYNCRESET), &dv_psc_regs->mdctl[47]); + writel(((readl(&dv_psc_regs->mdctl[DAVINCI_LPSC_VPSSMASTER]) & + ~PSC_MD_STATE_MSK) | PSC_SYNCRESET), + &dv_psc_regs->mdctl[DAVINCI_LPSC_VPSSMASTER]); writel((1 << PdNum), &dv_psc_regs->ptcmd); while (!(((readl(&dv_psc_regs->ptstat) >> PdNum) & PSC_GOSTAT) == 0)) ; - while (!((readl(&dv_psc_regs->mdstat[47]) & PSC_MD_STATE_MSK) == - PSC_SYNCRESET)) + while (!((readl(&dv_psc_regs->mdstat[DAVINCI_LPSC_VPSSMASTER]) & + PSC_MD_STATE_MSK) == PSC_SYNCRESET)) ; } void dm365_por_reset(void) { - if (readl(&dv_pll0_regs->rstype) & 3) + if (readl(&dv_pll0_regs->rstype) & + (PLL_RSTYPE_POR | PLL_RSTYPE_XWRST)) dm365_vpss_sync_reset(); } @@ -291,19 +295,20 @@ void dm365_psc_init(void) for (lpscgroup = lpscmin; lpscgroup <= lpscmax; lpscgroup++) { if (lpscgroup == 0) { - lpsc_start = 0; /* Enabling LPSC 3 to 28 SCR first */ - lpsc_end = 28; + /* Enabling LPSC 3 to 28 SCR first */ + lpsc_start = DAVINCI_LPSC_VPSSMSTR; + lpsc_end = DAVINCI_LPSC_TIMER1; } else if (lpscgroup == 1) { /* Skip locked LPSCs [29-37] */ - lpsc_start = 38; - lpsc_end = 47; + lpsc_start = DAVINCI_LPSC_CFG5; + lpsc_end = DAVINCI_LPSC_VPSSMASTER; } else { - lpsc_start = 50; - lpsc_end = 51; + lpsc_start = DAVINCI_LPSC_MJCP; + lpsc_end = DAVINCI_LPSC_HDVICP; } /* NEXT=0x3, Enable LPSC's */ for (i = lpsc_start; i <= lpsc_end; i++) - setbits_le32(&dv_psc_regs->mdctl[i], 0x3); + setbits_le32(&dv_psc_regs->mdctl[i], PSC_ENABLE); /* * Program goctl to start transition sequence for LPSCs @@ -322,7 +327,7 @@ void dm365_psc_init(void) /* Wait for MODSTAT = ENABLE from LPSC's */ for (i = lpsc_start; i <= lpsc_end; i++) while (!((readl(&dv_psc_regs->mdstat[i]) & - PSC_MD_STATE_MSK) == 0x3)) + PSC_MD_STATE_MSK) == PSC_ENABLE)) ; } } @@ -332,7 +337,7 @@ static void dm365_emif_init(void) writel(CONFIG_SYS_DM36x_AWCCR, &davinci_emif_regs->awccr); writel(CONFIG_SYS_DM36x_AB1CR, &davinci_emif_regs->ab1cr); - setbits_le32(&davinci_emif_regs->nandfcr, 1); + setbits_le32(&davinci_emif_regs->nandfcr, DAVINCI_NANDFCR_CS2NAND); writel(CONFIG_SYS_DM36x_AB2CR, &davinci_emif_regs->ab2cr); @@ -361,31 +366,12 @@ int post_log(char *format, ...) void dm36x_lowlevel_init(ulong bootflag) { - /* - * copied from arch/arm/cpu/arm926ejs/start.S - * - * flush v4 I/D caches - */ - asm("mov r0, #0"); - asm("mcr p15, 0, r0, c7, c7, 0"); /* flush v3/v4 cache */ - asm("mcr p15, 0, r0, c8, c7, 0"); /* flush v4 TLB */ - - /* - * disable MMU stuff and caches - */ - asm("mrc p15, 0, r0, c1, c0, 0"); - /* clear bits 13, 9:8 (--V- --RS) */ - asm("bic r0, r0, #0x00002300"); - /* clear bits 7, 2:0 (B--- -CAM) */ - asm("bic r0, r0, #0x00000087"); - /* set bit 2 (A) Align */ - asm("orr r0, r0, #0x00000002"); - /* set bit 12 (I) I-Cache */ - asm("orr r0, r0, #0x00001000"); - asm("mcr p15, 0, r0, c1, c0, 0"); + struct davinci_uart_ctrl_regs *davinci_uart_ctrl_regs = + (struct davinci_uart_ctrl_regs *)(CONFIG_SYS_NS16550_COM1 + + DAVINCI_UART_CTRL_BASE); /* Mask all interrupts */ - writel(0x04, &dv_aintc_regs->intctl); + writel(DV_AINTC_INTCTL_IDMODE, &dv_aintc_regs->intctl); writel(0x0, &dv_aintc_regs->eabase); writel(0x0, &dv_aintc_regs->eint0); writel(0x0, &dv_aintc_regs->eint1); @@ -422,7 +408,10 @@ void dm36x_lowlevel_init(ulong bootflag) * Fix Power and Emulation Management Register * see sprufh2.pdf page 38 Table 22 */ - writel(0x0000e003, (CONFIG_SYS_NS16550_COM1 + 0x30)); + writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | + DAVINCI_UART_PWREMU_MGMT_UTRST), + &davinci_uart_ctrl_regs->pwremu_mgmt); + puts("ddr init\n"); dm365_ddr_setup(); diff --git a/board/csb226/Makefile b/arch/arm/cpu/arm926ejs/mx28/Makefile index 6fe9becaa..7845310cf 100644 --- a/board/csb226/Makefile +++ b/arch/arm/cpu/arm926ejs/mx28/Makefile @@ -23,14 +23,17 @@ include $(TOPDIR)/config.mk -LIB = $(obj)lib$(BOARD).o +LIB = $(obj)lib$(SOC).o -COBJS := csb226.o flash.o +COBJS = clock.o mx28.o iomux.o timer.o -SRCS := $(COBJS:.o=.c) +SRCS := $(START:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) +START := $(addprefix $(obj),$(START)) -$(LIB): $(obj).depend $(OBJS) +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) ######################################################################### diff --git a/arch/arm/cpu/arm926ejs/mx28/clock.c b/arch/arm/cpu/arm926ejs/mx28/clock.c new file mode 100644 index 000000000..f69850600 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mx28/clock.c @@ -0,0 +1,355 @@ +/* + * Freescale i.MX28 clock setup code + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> + +/* The PLL frequency is always 480MHz, see section 10.2 in iMX28 datasheet. */ +#define PLL_FREQ_KHZ 480000 +#define PLL_FREQ_COEF 18 +/* The XTAL frequency is always 24MHz, see section 10.2 in iMX28 datasheet. */ +#define XTAL_FREQ_KHZ 24000 + +#define PLL_FREQ_MHZ (PLL_FREQ_KHZ / 1000) +#define XTAL_FREQ_MHZ (XTAL_FREQ_KHZ / 1000) + +static uint32_t mx28_get_pclk(void) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + + uint32_t clkctrl, clkseq, clkfrac; + uint32_t frac, div; + + clkctrl = readl(&clkctrl_regs->hw_clkctrl_cpu); + + /* No support of fractional divider calculation */ + if (clkctrl & + (CLKCTRL_CPU_DIV_XTAL_FRAC_EN | CLKCTRL_CPU_DIV_CPU_FRAC_EN)) { + return 0; + } + + clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq); + + /* XTAL Path */ + if (clkseq & CLKCTRL_CLKSEQ_BYPASS_CPU) { + div = (clkctrl & CLKCTRL_CPU_DIV_XTAL_MASK) >> + CLKCTRL_CPU_DIV_XTAL_OFFSET; + return XTAL_FREQ_MHZ / div; + } + + /* REF Path */ + clkfrac = readl(&clkctrl_regs->hw_clkctrl_frac0); + frac = clkfrac & CLKCTRL_FRAC0_CPUFRAC_MASK; + div = clkctrl & CLKCTRL_CPU_DIV_CPU_MASK; + return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div; +} + +static uint32_t mx28_get_hclk(void) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + + uint32_t div; + uint32_t clkctrl; + + clkctrl = readl(&clkctrl_regs->hw_clkctrl_hbus); + + /* No support of fractional divider calculation */ + if (clkctrl & CLKCTRL_HBUS_DIV_FRAC_EN) + return 0; + + div = clkctrl & CLKCTRL_HBUS_DIV_MASK; + return mx28_get_pclk() / div; +} + +static uint32_t mx28_get_emiclk(void) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + + uint32_t frac, div; + uint32_t clkctrl, clkseq, clkfrac; + + clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq); + clkctrl = readl(&clkctrl_regs->hw_clkctrl_emi); + + /* XTAL Path */ + if (clkseq & CLKCTRL_CLKSEQ_BYPASS_EMI) { + div = (clkctrl & CLKCTRL_EMI_DIV_XTAL_MASK) >> + CLKCTRL_EMI_DIV_XTAL_OFFSET; + return XTAL_FREQ_MHZ / div; + } + + clkfrac = readl(&clkctrl_regs->hw_clkctrl_frac0); + + /* REF Path */ + frac = (clkfrac & CLKCTRL_FRAC0_EMIFRAC_MASK) >> + CLKCTRL_FRAC0_EMIFRAC_OFFSET; + div = clkctrl & CLKCTRL_EMI_DIV_EMI_MASK; + return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div; +} + +static uint32_t mx28_get_gpmiclk(void) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + + uint32_t frac, div; + uint32_t clkctrl, clkseq, clkfrac; + + clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq); + clkctrl = readl(&clkctrl_regs->hw_clkctrl_gpmi); + + /* XTAL Path */ + if (clkseq & CLKCTRL_CLKSEQ_BYPASS_GPMI) { + div = clkctrl & CLKCTRL_GPMI_DIV_MASK; + return XTAL_FREQ_MHZ / div; + } + + clkfrac = readl(&clkctrl_regs->hw_clkctrl_frac1); + + /* REF Path */ + frac = (clkfrac & CLKCTRL_FRAC1_GPMIFRAC_MASK) >> + CLKCTRL_FRAC1_GPMIFRAC_OFFSET; + div = clkctrl & CLKCTRL_GPMI_DIV_MASK; + return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div; +} + +/* + * Set IO clock frequency, in kHz + */ +void mx28_set_ioclk(enum mxs_ioclock io, uint32_t freq) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + uint32_t div; + + if (freq == 0) + return; + + if (io > MXC_IOCLK1) + return; + + div = (PLL_FREQ_KHZ * PLL_FREQ_COEF) / freq; + + if (div < 18) + div = 18; + + if (div > 35) + div = 35; + + if (io == MXC_IOCLK0) { + writel(CLKCTRL_FRAC0_CLKGATEIO0, + &clkctrl_regs->hw_clkctrl_frac0_set); + clrsetbits_le32(&clkctrl_regs->hw_clkctrl_frac0, + CLKCTRL_FRAC0_IO0FRAC_MASK, + div << CLKCTRL_FRAC0_IO0FRAC_OFFSET); + writel(CLKCTRL_FRAC0_CLKGATEIO0, + &clkctrl_regs->hw_clkctrl_frac0_clr); + } else { + writel(CLKCTRL_FRAC0_CLKGATEIO1, + &clkctrl_regs->hw_clkctrl_frac0_set); + clrsetbits_le32(&clkctrl_regs->hw_clkctrl_frac0, + CLKCTRL_FRAC0_IO1FRAC_MASK, + div << CLKCTRL_FRAC0_IO1FRAC_OFFSET); + writel(CLKCTRL_FRAC0_CLKGATEIO1, + &clkctrl_regs->hw_clkctrl_frac0_clr); + } +} + +/* + * Get IO clock, returns IO clock in kHz + */ +static uint32_t mx28_get_ioclk(enum mxs_ioclock io) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + uint32_t tmp, ret; + + if (io > MXC_IOCLK1) + return 0; + + tmp = readl(&clkctrl_regs->hw_clkctrl_frac0); + + if (io == MXC_IOCLK0) + ret = (tmp & CLKCTRL_FRAC0_IO0FRAC_MASK) >> + CLKCTRL_FRAC0_IO0FRAC_OFFSET; + else + ret = (tmp & CLKCTRL_FRAC0_IO1FRAC_MASK) >> + CLKCTRL_FRAC0_IO1FRAC_OFFSET; + + return (PLL_FREQ_KHZ * PLL_FREQ_COEF) / ret; +} + +/* + * Configure SSP clock frequency, in kHz + */ +void mx28_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + uint32_t clk, clkreg; + + if (ssp > MXC_SSPCLK3) + return; + + clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) + + (ssp * sizeof(struct mx28_register)); + + clrbits_le32(clkreg, CLKCTRL_SSP_CLKGATE); + while (readl(clkreg) & CLKCTRL_SSP_CLKGATE) + ; + + if (xtal) + clk = XTAL_FREQ_KHZ; + else + clk = mx28_get_ioclk(ssp >> 1); + + if (freq > clk) + return; + + /* Calculate the divider and cap it if necessary */ + clk /= freq; + if (clk > CLKCTRL_SSP_DIV_MASK) + clk = CLKCTRL_SSP_DIV_MASK; + + clrsetbits_le32(clkreg, CLKCTRL_SSP_DIV_MASK, clk); + while (readl(clkreg) & CLKCTRL_SSP_BUSY) + ; + + if (xtal) + writel(CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp, + &clkctrl_regs->hw_clkctrl_clkseq_set); + else + writel(CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp, + &clkctrl_regs->hw_clkctrl_clkseq_clr); +} + +/* + * Return SSP frequency, in kHz + */ +static uint32_t mx28_get_sspclk(enum mxs_sspclock ssp) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + uint32_t clkreg; + uint32_t clk, tmp; + + if (ssp > MXC_SSPCLK3) + return 0; + + tmp = readl(&clkctrl_regs->hw_clkctrl_clkseq); + if (tmp & (CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp)) + return XTAL_FREQ_KHZ; + + clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) + + (ssp * sizeof(struct mx28_register)); + + tmp = readl(clkreg) & CLKCTRL_SSP_DIV_MASK; + + if (tmp == 0) + return 0; + + clk = mx28_get_ioclk(ssp >> 1); + + return clk / tmp; +} + +/* + * Set SSP/MMC bus frequency, in kHz) + */ +void mx28_set_ssp_busclock(unsigned int bus, uint32_t freq) +{ + struct mx28_ssp_regs *ssp_regs; + const uint32_t sspclk = mx28_get_sspclk(bus); + uint32_t reg; + uint32_t divide, rate, tgtclk; + + ssp_regs = (struct mx28_ssp_regs *)(MXS_SSP0_BASE + (bus * 0x2000)); + + /* + * SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)), + * CLOCK_DIVIDE has to be an even value from 2 to 254, and + * CLOCK_RATE could be any integer from 0 to 255. + */ + for (divide = 2; divide < 254; divide += 2) { + rate = sspclk / freq / divide; + if (rate <= 256) + break; + } + + tgtclk = sspclk / divide / rate; + while (tgtclk > freq) { + rate++; + tgtclk = sspclk / divide / rate; + } + if (rate > 256) + rate = 256; + + /* Always set timeout the maximum */ + reg = SSP_TIMING_TIMEOUT_MASK | + (divide << SSP_TIMING_CLOCK_DIVIDE_OFFSET) | + ((rate - 1) << SSP_TIMING_CLOCK_RATE_OFFSET); + writel(reg, &ssp_regs->hw_ssp_timing); + + debug("SPI%d: Set freq rate to %d KHz (requested %d KHz)\n", + bus, tgtclk, freq); +} + +uint32_t mxc_get_clock(enum mxc_clock clk) +{ + switch (clk) { + case MXC_ARM_CLK: + return mx28_get_pclk() * 1000000; + case MXC_GPMI_CLK: + return mx28_get_gpmiclk() * 1000000; + case MXC_AHB_CLK: + case MXC_IPG_CLK: + return mx28_get_hclk() * 1000000; + case MXC_EMI_CLK: + return mx28_get_emiclk(); + case MXC_IO0_CLK: + return mx28_get_ioclk(MXC_IOCLK0); + case MXC_IO1_CLK: + return mx28_get_ioclk(MXC_IOCLK1); + case MXC_SSP0_CLK: + return mx28_get_sspclk(MXC_SSPCLK0); + case MXC_SSP1_CLK: + return mx28_get_sspclk(MXC_SSPCLK1); + case MXC_SSP2_CLK: + return mx28_get_sspclk(MXC_SSPCLK2); + case MXC_SSP3_CLK: + return mx28_get_sspclk(MXC_SSPCLK3); + } + + return 0; +} diff --git a/arch/arm/cpu/arm926ejs/mx28/iomux.c b/arch/arm/cpu/arm926ejs/mx28/iomux.c new file mode 100644 index 000000000..9ea411f22 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mx28/iomux.c @@ -0,0 +1,109 @@ +/* + * Copyright 2004-2006,2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, + * <armlinux@phytec.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/iomux.h> +#include <asm/arch/imx-regs.h> + +#if defined(CONFIG_MX23) +#define DRIVE_OFFSET 0x200 +#define PULL_OFFSET 0x400 +#elif defined(CONFIG_MX28) +#define DRIVE_OFFSET 0x300 +#define PULL_OFFSET 0x600 +#else +#error "Please select CONFIG_MX23 or CONFIG_MX28" +#endif + +/* + * configures a single pad in the iomuxer + */ +int mxs_iomux_setup_pad(iomux_cfg_t pad) +{ + u32 reg, ofs, bp, bm; + void *iomux_base = (void *)MXS_PINCTRL_BASE; + struct mx28_register *mxs_reg; + + /* muxsel */ + ofs = 0x100; + ofs += PAD_BANK(pad) * 0x20 + PAD_PIN(pad) / 16 * 0x10; + bp = PAD_PIN(pad) % 16 * 2; + bm = 0x3 << bp; + reg = readl(iomux_base + ofs); + reg &= ~bm; + reg |= PAD_MUXSEL(pad) << bp; + writel(reg, iomux_base + ofs); + + /* drive */ + ofs = DRIVE_OFFSET; + ofs += PAD_BANK(pad) * 0x40 + PAD_PIN(pad) / 8 * 0x10; + /* mA */ + if (PAD_MA_VALID(pad)) { + bp = PAD_PIN(pad) % 8 * 4; + bm = 0x3 << bp; + reg = readl(iomux_base + ofs); + reg &= ~bm; + reg |= PAD_MA(pad) << bp; + writel(reg, iomux_base + ofs); + } + /* vol */ + if (PAD_VOL_VALID(pad)) { + bp = PAD_PIN(pad) % 8 * 4 + 2; + mxs_reg = (struct mx28_register *)(iomux_base + ofs); + if (PAD_VOL(pad)) + writel(1 << bp, &mxs_reg->reg_set); + else + writel(1 << bp, &mxs_reg->reg_clr); + } + + /* pull */ + if (PAD_PULL_VALID(pad)) { + ofs = PULL_OFFSET; + ofs += PAD_BANK(pad) * 0x10; + bp = PAD_PIN(pad); + mxs_reg = (struct mx28_register *)(iomux_base + ofs); + if (PAD_PULL(pad)) + writel(1 << bp, &mxs_reg->reg_set); + else + writel(1 << bp, &mxs_reg->reg_clr); + } + + return 0; +} + +int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count) +{ + const iomux_cfg_t *p = pad_list; + int i; + int ret; + + for (i = 0; i < count; i++) { + ret = mxs_iomux_setup_pad(*p); + if (ret) + return ret; + p++; + } + + return 0; +} diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c new file mode 100644 index 000000000..088c019b7 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c @@ -0,0 +1,221 @@ +/* + * Freescale i.MX28 common code + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/iomux.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* 1 second delay should be plenty of time for block reset. */ +#define RESET_MAX_TIMEOUT 1000000 + +#define MX28_BLOCK_SFTRST (1 << 31) +#define MX28_BLOCK_CLKGATE (1 << 30) + +/* Lowlevel init isn't used on i.MX28, so just have a dummy here */ +inline void lowlevel_init(void) {} + +void reset_cpu(ulong ignored) __attribute__((noreturn)); + +void reset_cpu(ulong ignored) +{ + + struct mx28_rtc_regs *rtc_regs = + (struct mx28_rtc_regs *)MXS_RTC_BASE; + + /* Wait 1 uS before doing the actual watchdog reset */ + writel(1, &rtc_regs->hw_rtc_watchdog); + writel(RTC_CTRL_WATCHDOGEN, &rtc_regs->hw_rtc_ctrl_set); + + /* Endless loop, reset will exit from here */ + for (;;) + ; +} + +int mx28_wait_mask_set(struct mx28_register *reg, uint32_t mask, int timeout) +{ + while (--timeout) { + if ((readl(®->reg) & mask) == mask) + break; + udelay(1); + } + + return !timeout; +} + +int mx28_wait_mask_clr(struct mx28_register *reg, uint32_t mask, int timeout) +{ + while (--timeout) { + if ((readl(®->reg) & mask) == 0) + break; + udelay(1); + } + + return !timeout; +} + +int mx28_reset_block(struct mx28_register *reg) +{ + /* Clear SFTRST */ + writel(MX28_BLOCK_SFTRST, ®->reg_clr); + + if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT)) + return 1; + + /* Clear CLKGATE */ + writel(MX28_BLOCK_CLKGATE, ®->reg_clr); + + /* Set SFTRST */ + writel(MX28_BLOCK_SFTRST, ®->reg_set); + + /* Wait for CLKGATE being set */ + if (mx28_wait_mask_set(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT)) + return 1; + + /* Clear SFTRST */ + writel(MX28_BLOCK_SFTRST, ®->reg_clr); + + if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT)) + return 1; + + /* Clear CLKGATE */ + writel(MX28_BLOCK_CLKGATE, ®->reg_clr); + + if (mx28_wait_mask_clr(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT)) + return 1; + + return 0; +} + +void mx28_fixup_vt(uint32_t start_addr) +{ + uint32_t *vt = (uint32_t *)0x20; + int i; + + for (i = 0; i < 8; i++) + vt[i] = start_addr + (4 * i); +} + +#ifdef CONFIG_ARCH_MISC_INIT +int arch_misc_init(void) +{ + mx28_fixup_vt(gd->relocaddr); + return 0; +} +#endif + +#ifdef CONFIG_ARCH_CPU_INIT +int arch_cpu_init(void) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + extern uint32_t _start; + + mx28_fixup_vt((uint32_t)&_start); + + /* + * Enable NAND clock + */ + /* Clear bypass bit */ + writel(CLKCTRL_CLKSEQ_BYPASS_GPMI, + &clkctrl_regs->hw_clkctrl_clkseq_set); + + /* Set GPMI clock to ref_gpmi / 12 */ + clrsetbits_le32(&clkctrl_regs->hw_clkctrl_gpmi, + CLKCTRL_GPMI_CLKGATE | CLKCTRL_GPMI_DIV_MASK, 1); + + udelay(1000); + + /* + * Configure GPIO unit + */ + mxs_gpio_init(); + + return 0; +} +#endif + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + printf("Freescale i.MX28 family\n"); + return 0; +} +#endif + +int do_mx28_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + printf("CPU: %3d MHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000); + printf("BUS: %3d MHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000000); + printf("EMI: %3d MHz\n", mxc_get_clock(MXC_EMI_CLK)); + printf("GPMI: %3d MHz\n", mxc_get_clock(MXC_GPMI_CLK) / 1000000); + return 0; +} + +/* + * Initializes on-chip ethernet controllers. + */ +#ifdef CONFIG_CMD_NET +int cpu_eth_init(bd_t *bis) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + + /* Turn on ENET clocks */ + clrbits_le32(&clkctrl_regs->hw_clkctrl_enet, + CLKCTRL_ENET_SLEEP | CLKCTRL_ENET_DISABLE); + + /* Set up ENET PLL for 50 MHz */ + /* Power on ENET PLL */ + writel(CLKCTRL_PLL2CTRL0_POWER, + &clkctrl_regs->hw_clkctrl_pll2ctrl0_set); + + udelay(10); + + /* Gate on ENET PLL */ + writel(CLKCTRL_PLL2CTRL0_CLKGATE, + &clkctrl_regs->hw_clkctrl_pll2ctrl0_clr); + + /* Enable pad output */ + setbits_le32(&clkctrl_regs->hw_clkctrl_enet, CLKCTRL_ENET_CLK_OUT_EN); + + return 0; +} +#endif + +U_BOOT_CMD( + clocks, CONFIG_SYS_MAXARGS, 1, do_mx28_showclocks, + "display clocks", + "" +); diff --git a/arch/arm/cpu/arm926ejs/mx28/timer.c b/arch/arm/cpu/arm926ejs/mx28/timer.c new file mode 100644 index 000000000..dbc904d08 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mx28/timer.c @@ -0,0 +1,141 @@ +/* + * Freescale i.MX28 timer driver + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * (C) Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> + +/* Maximum fixed count */ +#define TIMER_LOAD_VAL 0xffffffff + +DECLARE_GLOBAL_DATA_PTR; + +#define timestamp (gd->tbl) +#define lastdec (gd->lastinc) + +/* + * This driver uses 1kHz clock source. + */ +#define MX28_INCREMENTER_HZ 1000 + +static inline unsigned long tick_to_time(unsigned long tick) +{ + return tick / (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ); +} + +static inline unsigned long time_to_tick(unsigned long time) +{ + return time * (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ); +} + +/* Calculate how many ticks happen in "us" microseconds */ +static inline unsigned long us_to_tick(unsigned long us) +{ + return (us * MX28_INCREMENTER_HZ) / 1000000; +} + +int timer_init(void) +{ + struct mx28_timrot_regs *timrot_regs = + (struct mx28_timrot_regs *)MXS_TIMROT_BASE; + + /* Reset Timers and Rotary Encoder module */ + mx28_reset_block(&timrot_regs->hw_timrot_rotctrl_reg); + + /* Set fixed_count to 0 */ + writel(0, &timrot_regs->hw_timrot_fixed_count0); + + /* Set UPDATE bit and 1Khz frequency */ + writel(TIMROT_TIMCTRLn_UPDATE | TIMROT_TIMCTRLn_RELOAD | + TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL, + &timrot_regs->hw_timrot_timctrl0); + + /* Set fixed_count to maximal value */ + writel(TIMER_LOAD_VAL, &timrot_regs->hw_timrot_fixed_count0); + + return 0; +} + +ulong get_timer(ulong base) +{ + struct mx28_timrot_regs *timrot_regs = + (struct mx28_timrot_regs *)MXS_TIMROT_BASE; + + /* Current tick value */ + uint32_t now = readl(&timrot_regs->hw_timrot_running_count0); + + if (lastdec >= now) { + /* + * normal mode (non roll) + * move stamp forward with absolut diff ticks + */ + timestamp += (lastdec - now); + } else { + /* we have rollover of decrementer */ + timestamp += (TIMER_LOAD_VAL - now) + lastdec; + + } + lastdec = now; + + return tick_to_time(timestamp) - base; +} + +/* We use the HW_DIGCTL_MICROSECONDS register for sub-millisecond timer. */ +#define MX28_HW_DIGCTL_MICROSECONDS 0x8001c0c0 + +void __udelay(unsigned long usec) +{ + uint32_t old, new, incr; + uint32_t counter = 0; + + old = readl(MX28_HW_DIGCTL_MICROSECONDS); + + while (counter < usec) { + new = readl(MX28_HW_DIGCTL_MICROSECONDS); + + /* Check if the timer wrapped. */ + if (new < old) { + incr = 0xffffffff - old; + incr += new; + } else { + incr = new - old; + } + + /* + * Check if we are close to the maximum time and the counter + * would wrap if incremented. If that's the case, break out + * from the loop as the requested delay time passed. + */ + if (counter + incr < counter) + break; + + counter += incr; + old = new; + } +} diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index 1dee81f22..a68461126 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -33,6 +33,13 @@ ifdef CONFIG_OMAP COBJS += gpio.o endif +ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) +COBJS += hwinit-common.o +COBJS += clocks-common.o +COBJS += emif-common.o +SOBJS += lowlevel_init.o +endif + ifdef CONFIG_SPL_BUILD COBJS += spl.o ifdef CONFIG_SPL_NAND_SUPPORT @@ -43,6 +50,12 @@ COBJS += spl_mmc.o endif endif +ifndef CONFIG_SPL_BUILD +ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) +COBJS += mem-common.o +endif +endif + SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c new file mode 100644 index 000000000..f64a10bfc --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -0,0 +1,609 @@ +/* + * + * Clock initialization for OMAP4 + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Aneesh V <aneesh@ti.com> + * + * Based on previous work by: + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * Rajendra Nayak <rnayak@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/omap_common.h> +#include <asm/gpio.h> +#include <asm/arch/clocks.h> +#include <asm/arch/sys_proto.h> +#include <asm/utils.h> +#include <asm/omap_gpio.h> + +#ifndef CONFIG_SPL_BUILD +/* + * printing to console doesn't work unless + * this code is executed from SPL + */ +#define printf(fmt, args...) +#define puts(s) +#endif + +static inline u32 __get_sys_clk_index(void) +{ + u32 ind; + /* + * For ES1 the ROM code calibration of sys clock is not reliable + * due to hw issue. So, use hard-coded value. If this value is not + * correct for any board over-ride this function in board file + * From ES2.0 onwards you will get this information from + * CM_SYS_CLKSEL + */ + if (omap_revision() == OMAP4430_ES1_0) + ind = OMAP_SYS_CLK_IND_38_4_MHZ; + else { + /* SYS_CLKSEL - 1 to match the dpll param array indices */ + ind = (readl(&prcm->cm_sys_clksel) & + CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1; + } + return ind; +} + +u32 get_sys_clk_index(void) + __attribute__ ((weak, alias("__get_sys_clk_index"))); + +u32 get_sys_clk_freq(void) +{ + u8 index = get_sys_clk_index(); + return sys_clk_array[index]; +} + +static inline void do_bypass_dpll(u32 *const base) +{ + struct dpll_regs *dpll_regs = (struct dpll_regs *)base; + + clrsetbits_le32(&dpll_regs->cm_clkmode_dpll, + CM_CLKMODE_DPLL_DPLL_EN_MASK, + DPLL_EN_FAST_RELOCK_BYPASS << + CM_CLKMODE_DPLL_EN_SHIFT); +} + +static inline void wait_for_bypass(u32 *const base) +{ + struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; + + if (!wait_on_value(ST_DPLL_CLK_MASK, 0, &dpll_regs->cm_idlest_dpll, + LDELAY)) { + printf("Bypassing DPLL failed %p\n", base); + } +} + +static inline void do_lock_dpll(u32 *const base) +{ + struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; + + clrsetbits_le32(&dpll_regs->cm_clkmode_dpll, + CM_CLKMODE_DPLL_DPLL_EN_MASK, + DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT); +} + +static inline void wait_for_lock(u32 *const base) +{ + struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; + + if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK, + &dpll_regs->cm_idlest_dpll, LDELAY)) { + printf("DPLL locking failed for %p\n", base); + hang(); + } +} + +inline u32 check_for_lock(u32 *const base) +{ + struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; + u32 lock = readl(&dpll_regs->cm_idlest_dpll) & ST_DPLL_CLK_MASK; + + return lock; +} + +static void do_setup_dpll(u32 *const base, const struct dpll_params *params, + u8 lock, char *dpll) +{ + u32 temp, M, N; + struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; + + temp = readl(&dpll_regs->cm_clksel_dpll); + + if (check_for_lock(base)) { + /* + * The Dpll has already been locked by rom code using CH. + * Check if M,N are matching with Ideal nominal opp values. + * If matches, skip the rest otherwise relock. + */ + M = (temp & CM_CLKSEL_DPLL_M_MASK) >> CM_CLKSEL_DPLL_M_SHIFT; + N = (temp & CM_CLKSEL_DPLL_N_MASK) >> CM_CLKSEL_DPLL_N_SHIFT; + if ((M != (params->m)) || (N != (params->n))) { + debug("\n %s Dpll locked, but not for ideal M = %d," + "N = %d values, current values are M = %d," + "N= %d" , dpll, params->m, params->n, + M, N); + } else { + /* Dpll locked with ideal values for nominal opps. */ + debug("\n %s Dpll already locked with ideal" + "nominal opp values", dpll); + goto setup_post_dividers; + } + } + + bypass_dpll(base); + + /* Set M & N */ + temp &= ~CM_CLKSEL_DPLL_M_MASK; + temp |= (params->m << CM_CLKSEL_DPLL_M_SHIFT) & CM_CLKSEL_DPLL_M_MASK; + + temp &= ~CM_CLKSEL_DPLL_N_MASK; + temp |= (params->n << CM_CLKSEL_DPLL_N_SHIFT) & CM_CLKSEL_DPLL_N_MASK; + + writel(temp, &dpll_regs->cm_clksel_dpll); + + /* Lock */ + if (lock) + do_lock_dpll(base); + +setup_post_dividers: + setup_post_dividers(base, params); + + /* Wait till the DPLL locks */ + if (lock) + wait_for_lock(base); +} + +u32 omap_ddr_clk(void) +{ + u32 ddr_clk, sys_clk_khz, omap_rev, divider; + const struct dpll_params *core_dpll_params; + + omap_rev = omap_revision(); + sys_clk_khz = get_sys_clk_freq() / 1000; + + core_dpll_params = get_core_dpll_params(); + + debug("sys_clk %d\n ", sys_clk_khz * 1000); + + /* Find Core DPLL locked frequency first */ + ddr_clk = sys_clk_khz * 2 * core_dpll_params->m / + (core_dpll_params->n + 1); + + if (omap_rev < OMAP5430_ES1_0) { + /* + * DDR frequency is PHY_ROOT_CLK/2 + * PHY_ROOT_CLK = Fdpll/2/M2 + */ + divider = 4; + } else { + /* + * DDR frequency is PHY_ROOT_CLK + * PHY_ROOT_CLK = Fdpll/2/M2 + */ + divider = 2; + } + + ddr_clk = ddr_clk / divider / core_dpll_params->m2; + ddr_clk *= 1000; /* convert to Hz */ + debug("ddr_clk %d\n ", ddr_clk); + + return ddr_clk; +} + +/* + * Lock MPU dpll + * + * Resulting MPU frequencies: + * 4430 ES1.0 : 600 MHz + * 4430 ES2.x : 792 MHz (OPP Turbo) + * 4460 : 920 MHz (OPP Turbo) - DCC disabled + */ +void configure_mpu_dpll(void) +{ + const struct dpll_params *params; + struct dpll_regs *mpu_dpll_regs; + u32 omap_rev; + omap_rev = omap_revision(); + + /* + * DCC and clock divider settings for 4460. + * DCC is required, if more than a certain frequency is required. + * For, 4460 > 1GHZ. + * 5430 > 1.4GHZ. + */ + if ((omap_rev >= OMAP4460_ES1_0) && (omap_rev < OMAP5430_ES1_0)) { + mpu_dpll_regs = + (struct dpll_regs *)&prcm->cm_clkmode_dpll_mpu; + bypass_dpll(&prcm->cm_clkmode_dpll_mpu); + clrbits_le32(&prcm->cm_mpu_mpu_clkctrl, + MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK); + setbits_le32(&prcm->cm_mpu_mpu_clkctrl, + MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK); + clrbits_le32(&mpu_dpll_regs->cm_clksel_dpll, + CM_CLKSEL_DCC_EN_MASK); + } + + params = get_mpu_dpll_params(); + + do_setup_dpll(&prcm->cm_clkmode_dpll_mpu, params, DPLL_LOCK, "mpu"); + debug("MPU DPLL locked\n"); +} + +static void setup_dplls(void) +{ + u32 sysclk_ind, temp; + const struct dpll_params *params; + debug("setup_dplls\n"); + + sysclk_ind = get_sys_clk_index(); + + /* CORE dpll */ + params = get_core_dpll_params(); /* default - safest */ + /* + * Do not lock the core DPLL now. Just set it up. + * Core DPLL will be locked after setting up EMIF + * using the FREQ_UPDATE method(freq_update_core()) + */ + do_setup_dpll(&prcm->cm_clkmode_dpll_core, params, DPLL_NO_LOCK, + "core"); + /* Set the ratios for CORE_CLK, L3_CLK, L4_CLK */ + temp = (CLKSEL_CORE_X2_DIV_1 << CLKSEL_CORE_SHIFT) | + (CLKSEL_L3_CORE_DIV_2 << CLKSEL_L3_SHIFT) | + (CLKSEL_L4_L3_DIV_2 << CLKSEL_L4_SHIFT); + writel(temp, &prcm->cm_clksel_core); + debug("Core DPLL configured\n"); + + /* lock PER dpll */ + params = get_per_dpll_params(); + do_setup_dpll(&prcm->cm_clkmode_dpll_per, + params, DPLL_LOCK, "per"); + debug("PER DPLL locked\n"); + + /* MPU dpll */ + configure_mpu_dpll(); +} + +#ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL +static void setup_non_essential_dplls(void) +{ + u32 sys_clk_khz, abe_ref_clk; + u32 sysclk_ind, sd_div, num, den; + const struct dpll_params *params; + + sysclk_ind = get_sys_clk_index(); + sys_clk_khz = get_sys_clk_freq() / 1000; + + /* IVA */ + clrsetbits_le32(&prcm->cm_bypclk_dpll_iva, + CM_BYPCLK_DPLL_IVA_CLKSEL_MASK, DPLL_IVA_CLKSEL_CORE_X2_DIV_2); + + params = get_iva_dpll_params(); + do_setup_dpll(&prcm->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva"); + + /* + * USB: + * USB dpll is J-type. Need to set DPLL_SD_DIV for jitter correction + * DPLL_SD_DIV = CEILING ([DPLL_MULT/(DPLL_DIV+1)]* CLKINP / 250) + * - where CLKINP is sys_clk in MHz + * Use CLKINP in KHz and adjust the denominator accordingly so + * that we have enough accuracy and at the same time no overflow + */ + params = get_usb_dpll_params(); + num = params->m * sys_clk_khz; + den = (params->n + 1) * 250 * 1000; + num += den - 1; + sd_div = num / den; + clrsetbits_le32(&prcm->cm_clksel_dpll_usb, + CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK, + sd_div << CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT); + + /* Now setup the dpll with the regular function */ + do_setup_dpll(&prcm->cm_clkmode_dpll_usb, params, DPLL_LOCK, "usb"); + + /* Configure ABE dpll */ + params = get_abe_dpll_params(); +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK; +#else + abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK; + /* + * We need to enable some additional options to achieve + * 196.608MHz from 32768 Hz + */ + setbits_le32(&prcm->cm_clkmode_dpll_abe, + CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK| + CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK| + CM_CLKMODE_DPLL_LPMODE_EN_MASK| + CM_CLKMODE_DPLL_REGM4XEN_MASK); + /* Spend 4 REFCLK cycles at each stage */ + clrsetbits_le32(&prcm->cm_clkmode_dpll_abe, + CM_CLKMODE_DPLL_RAMP_RATE_MASK, + 1 << CM_CLKMODE_DPLL_RAMP_RATE_SHIFT); +#endif + + /* Select the right reference clk */ + clrsetbits_le32(&prcm->cm_abe_pll_ref_clksel, + CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK, + abe_ref_clk << CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT); + /* Lock the dpll */ + do_setup_dpll(&prcm->cm_clkmode_dpll_abe, params, DPLL_LOCK, "abe"); +} +#endif + +void do_scale_tps62361(u32 reg, u32 volt_mv) +{ + u32 temp, step; + + step = volt_mv - TPS62361_BASE_VOLT_MV; + step /= 10; + + /* + * Select SET1 in TPS62361: + * VSEL1 is grounded on board. So the following selects + * VSEL1 = 0 and VSEL0 = 1 + */ + gpio_direction_output(TPS62361_VSEL0_GPIO, 0); + gpio_set_value(TPS62361_VSEL0_GPIO, 1); + + temp = TPS62361_I2C_SLAVE_ADDR | + (reg << PRM_VC_VAL_BYPASS_REGADDR_SHIFT) | + (step << PRM_VC_VAL_BYPASS_DATA_SHIFT) | + PRM_VC_VAL_BYPASS_VALID_BIT; + debug("do_scale_tps62361: volt - %d step - 0x%x\n", volt_mv, step); + + writel(temp, &prcm->prm_vc_val_bypass); + if (!wait_on_value(PRM_VC_VAL_BYPASS_VALID_BIT, 0, + &prcm->prm_vc_val_bypass, LDELAY)) { + puts("Scaling voltage failed for vdd_mpu from TPS\n"); + } +} + +void do_scale_vcore(u32 vcore_reg, u32 volt_mv) +{ + u32 temp, offset_code; + u32 step = 12660; /* 12.66 mV represented in uV */ + u32 offset = volt_mv; + + /* convert to uV for better accuracy in the calculations */ + offset *= 1000; + + if (omap_revision() == OMAP4430_ES1_0) + offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV; + else + offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV; + + offset_code = (offset + step - 1) / step; + /* The code starts at 1 not 0 */ + offset_code++; + + debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv, + offset_code); + + temp = SMPS_I2C_SLAVE_ADDR | + (vcore_reg << PRM_VC_VAL_BYPASS_REGADDR_SHIFT) | + (offset_code << PRM_VC_VAL_BYPASS_DATA_SHIFT) | + PRM_VC_VAL_BYPASS_VALID_BIT; + writel(temp, &prcm->prm_vc_val_bypass); + if (!wait_on_value(PRM_VC_VAL_BYPASS_VALID_BIT, 0, + &prcm->prm_vc_val_bypass, LDELAY)) { + printf("Scaling voltage failed for 0x%x\n", vcore_reg); + } +} + +static inline void enable_clock_domain(u32 *const clkctrl_reg, u32 enable_mode) +{ + clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK, + enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT); + debug("Enable clock domain - %p\n", clkctrl_reg); +} + +static inline void wait_for_clk_enable(u32 *clkctrl_addr) +{ + u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED; + u32 bound = LDELAY; + + while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) || + (idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) { + + clkctrl = readl(clkctrl_addr); + idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >> + MODULE_CLKCTRL_IDLEST_SHIFT; + if (--bound == 0) { + printf("Clock enable failed for 0x%p idlest 0x%x\n", + clkctrl_addr, clkctrl); + return; + } + } +} + +static inline void enable_clock_module(u32 *const clkctrl_addr, u32 enable_mode, + u32 wait_for_enable) +{ + clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK, + enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT); + debug("Enable clock module - %p\n", clkctrl_addr); + if (wait_for_enable) + wait_for_clk_enable(clkctrl_addr); +} + +void freq_update_core(void) +{ + u32 freq_config1 = 0; + const struct dpll_params *core_dpll_params; + + core_dpll_params = get_core_dpll_params(); + /* Put EMIF clock domain in sw wakeup mode */ + enable_clock_domain(&prcm->cm_memif_clkstctrl, + CD_CLKCTRL_CLKTRCTRL_SW_WKUP); + wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl); + wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl); + + freq_config1 = SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK | + SHADOW_FREQ_CONFIG1_DLL_RESET_MASK; + + freq_config1 |= (DPLL_EN_LOCK << SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT) & + SHADOW_FREQ_CONFIG1_DPLL_EN_MASK; + + freq_config1 |= (core_dpll_params->m2 << + SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT) & + SHADOW_FREQ_CONFIG1_M2_DIV_MASK; + + writel(freq_config1, &prcm->cm_shadow_freq_config1); + if (!wait_on_value(SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK, 0, + &prcm->cm_shadow_freq_config1, LDELAY)) { + puts("FREQ UPDATE procedure failed!!"); + hang(); + } + + /* Put EMIF clock domain back in hw auto mode */ + enable_clock_domain(&prcm->cm_memif_clkstctrl, + CD_CLKCTRL_CLKTRCTRL_HW_AUTO); + wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl); + wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl); +} + +void bypass_dpll(u32 *const base) +{ + do_bypass_dpll(base); + wait_for_bypass(base); +} + +void lock_dpll(u32 *const base) +{ + do_lock_dpll(base); + wait_for_lock(base); +} + +void setup_clocks_for_console(void) +{ + /* Do not add any spl_debug prints in this function */ + clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, + CD_CLKCTRL_CLKTRCTRL_SW_WKUP << + CD_CLKCTRL_CLKTRCTRL_SHIFT); + + /* Enable all UARTs - console will be on one of them */ + clrsetbits_le32(&prcm->cm_l4per_uart1_clkctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); + + clrsetbits_le32(&prcm->cm_l4per_uart2_clkctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); + + clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); + + clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); + + clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, + CD_CLKCTRL_CLKTRCTRL_HW_AUTO << + CD_CLKCTRL_CLKTRCTRL_SHIFT); +} + +void setup_sri2c(void) +{ + u32 sys_clk_khz, cycles_hi, cycles_low, temp; + + sys_clk_khz = get_sys_clk_freq() / 1000; + + /* + * Setup the dedicated I2C controller for Voltage Control + * I2C clk - high period 40% low period 60% + */ + cycles_hi = sys_clk_khz * 4 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10; + cycles_low = sys_clk_khz * 6 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10; + /* values to be set in register - less by 5 & 7 respectively */ + cycles_hi -= 5; + cycles_low -= 7; + temp = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) | + (cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT); + writel(temp, &prcm->prm_vc_cfg_i2c_clk); + + /* Disable high speed mode and all advanced features */ + writel(0x0, &prcm->prm_vc_cfg_i2c_mode); +} + +void do_enable_clocks(u32 *const *clk_domains, + u32 *const *clk_modules_hw_auto, + u32 *const *clk_modules_explicit_en, + u8 wait_for_enable) +{ + u32 i, max = 100; + + /* Put the clock domains in SW_WKUP mode */ + for (i = 0; (i < max) && clk_domains[i]; i++) { + enable_clock_domain(clk_domains[i], + CD_CLKCTRL_CLKTRCTRL_SW_WKUP); + } + + /* Clock modules that need to be put in HW_AUTO */ + for (i = 0; (i < max) && clk_modules_hw_auto[i]; i++) { + enable_clock_module(clk_modules_hw_auto[i], + MODULE_CLKCTRL_MODULEMODE_HW_AUTO, + wait_for_enable); + }; + + /* Clock modules that need to be put in SW_EXPLICIT_EN mode */ + for (i = 0; (i < max) && clk_modules_explicit_en[i]; i++) { + enable_clock_module(clk_modules_explicit_en[i], + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN, + wait_for_enable); + }; + + /* Put the clock domains in HW_AUTO mode now */ + for (i = 0; (i < max) && clk_domains[i]; i++) { + enable_clock_domain(clk_domains[i], + CD_CLKCTRL_CLKTRCTRL_HW_AUTO); + } +} + +void prcm_init(void) +{ + switch (omap_hw_init_context()) { + case OMAP_INIT_CONTEXT_SPL: + case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR: + case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH: + enable_basic_clocks(); + scale_vcores(); + setup_dplls(); +#ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL + setup_non_essential_dplls(); + enable_non_essential_clocks(); +#endif + break; + default: + break; + } + + if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context()) + enable_basic_uboot_clocks(); +} diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c new file mode 100644 index 000000000..ce03b5ce0 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -0,0 +1,1140 @@ +/* + * EMIF programming + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/emif.h> +#include <asm/arch/clocks.h> +#include <asm/arch/sys_proto.h> +#include <asm/omap_common.h> +#include <asm/utils.h> + +inline u32 emif_num(u32 base) +{ + if (base == EMIF1_BASE) + return 1; + else if (base == EMIF2_BASE) + return 2; + else + return 0; +} + + +static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr) +{ + u32 mr; + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + mr_addr |= cs << EMIF_REG_CS_SHIFT; + writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg); + if (omap_revision() == OMAP4430_ES2_0) + mr = readl(&emif->emif_lpddr2_mode_reg_data_es2); + else + mr = readl(&emif->emif_lpddr2_mode_reg_data); + debug("get_mr: EMIF%d cs %d mr %08x val 0x%x\n", emif_num(base), + cs, mr_addr, mr); + return mr; +} + +static inline void set_mr(u32 base, u32 cs, u32 mr_addr, u32 mr_val) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + mr_addr |= cs << EMIF_REG_CS_SHIFT; + writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg); + writel(mr_val, &emif->emif_lpddr2_mode_reg_data); +} + +void emif_reset_phy(u32 base) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + u32 iodft; + + iodft = readl(&emif->emif_iodft_tlgc); + iodft |= EMIF_REG_RESET_PHY_MASK; + writel(iodft, &emif->emif_iodft_tlgc); +} + +static void do_lpddr2_init(u32 base, u32 cs) +{ + u32 mr_addr; + + /* Wait till device auto initialization is complete */ + while (get_mr(base, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK) + ; + set_mr(base, cs, LPDDR2_MR10, MR10_ZQ_ZQINIT); + /* + * tZQINIT = 1 us + * Enough loops assuming a maximum of 2GHz + */ + sdelay(2000); + set_mr(base, cs, LPDDR2_MR1, MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3); + set_mr(base, cs, LPDDR2_MR16, MR16_REF_FULL_ARRAY); + /* + * Enable refresh along with writing MR2 + * Encoding of RL in MR2 is (RL - 2) + */ + mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK; + set_mr(base, cs, mr_addr, RL_FINAL - 2); +} + +static void lpddr2_init(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + /* Not NVM */ + clrbits_le32(&emif->emif_lpddr2_nvm_config, EMIF_REG_CS1NVMEN_MASK); + + /* + * Keep REG_INITREF_DIS = 1 to prevent re-initialization of SDRAM + * when EMIF_SDRAM_CONFIG register is written + */ + setbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK); + + /* + * Set the SDRAM_CONFIG and PHY_CTRL for the + * un-locked frequency & default RL + */ + writel(regs->sdram_config_init, &emif->emif_sdram_config); + writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1); + + do_lpddr2_init(base, CS0); + if (regs->sdram_config & EMIF_REG_EBANK_MASK) + do_lpddr2_init(base, CS1); + + writel(regs->sdram_config, &emif->emif_sdram_config); + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1); + + /* Enable refresh now */ + clrbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK); + +} + +void emif_update_timings(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl_shdw); + writel(regs->sdram_tim1, &emif->emif_sdram_tim_1_shdw); + writel(regs->sdram_tim2, &emif->emif_sdram_tim_2_shdw); + writel(regs->sdram_tim3, &emif->emif_sdram_tim_3_shdw); + if (omap_revision() == OMAP4430_ES1_0) { + /* ES1 bug EMIF should be in force idle during freq_update */ + writel(0, &emif->emif_pwr_mgmt_ctrl); + } else { + writel(EMIF_PWR_MGMT_CTRL, &emif->emif_pwr_mgmt_ctrl); + writel(EMIF_PWR_MGMT_CTRL_SHDW, &emif->emif_pwr_mgmt_ctrl_shdw); + } + writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl_shdw); + writel(regs->zq_config, &emif->emif_zq_config); + writel(regs->temp_alert_config, &emif->emif_temp_alert_config); + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); + + if (omap_revision() == OMAP5430_ES1_0) { + writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0, + &emif->emif_l3_config); + } else if (omap_revision() >= OMAP4460_ES1_0) { + writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0, + &emif->emif_l3_config); + } else { + writel(EMIF_L3_CONFIG_VAL_SYS_10_LL_0, + &emif->emif_l3_config); + } +} + +#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg)) + +/* + * Organization and refresh requirements for LPDDR2 devices of different + * types and densities. Derived from JESD209-2 section 2.4 + */ +const struct lpddr2_addressing addressing_table[] = { + /* Banks tREFIx10 rowx32,rowx16 colx32,colx16 density */ + {BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_7, COL_8} },/*64M */ + {BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_8, COL_9} },/*128M */ + {BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_8, COL_9} },/*256M */ + {BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*512M */ + {BANKS8, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*1GS4 */ + {BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_9, COL_10} },/*2GS4 */ + {BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_10, COL_11} },/*4G */ + {BANKS8, T_REFI_3_9, {ROW_15, ROW_15}, {COL_10, COL_11} },/*8G */ + {BANKS4, T_REFI_7_8, {ROW_14, ROW_14}, {COL_9, COL_10} },/*1GS2 */ + {BANKS4, T_REFI_3_9, {ROW_15, ROW_15}, {COL_9, COL_10} },/*2GS2 */ +}; + +static const u32 lpddr2_density_2_size_in_mbytes[] = { + 8, /* 64Mb */ + 16, /* 128Mb */ + 32, /* 256Mb */ + 64, /* 512Mb */ + 128, /* 1Gb */ + 256, /* 2Gb */ + 512, /* 4Gb */ + 1024, /* 8Gb */ + 2048, /* 16Gb */ + 4096 /* 32Gb */ +}; + +/* + * Calculate the period of DDR clock from frequency value and set the + * denominator and numerator in global variables for easy access later + */ +static void set_ddr_clk_period(u32 freq) +{ + /* + * period = 1/freq + * period_in_ns = 10^9/freq + */ + *T_num = 1000000000; + *T_den = freq; + cancel_out(T_num, T_den, 200); + +} + +/* + * Convert time in nano seconds to number of cycles of DDR clock + */ +static inline u32 ns_2_cycles(u32 ns) +{ + return ((ns * (*T_den)) + (*T_num) - 1) / (*T_num); +} + +/* + * ns_2_cycles with the difference that the time passed is 2 times the actual + * value(to avoid fractions). The cycles returned is for the original value of + * the timing parameter + */ +static inline u32 ns_x2_2_cycles(u32 ns) +{ + return ((ns * (*T_den)) + (*T_num) * 2 - 1) / ((*T_num) * 2); +} + +/* + * Find addressing table index based on the device's type(S2 or S4) and + * density + */ +s8 addressing_table_index(u8 type, u8 density, u8 width) +{ + u8 index; + if ((density > LPDDR2_DENSITY_8Gb) || (width == LPDDR2_IO_WIDTH_8)) + return -1; + + /* + * Look at the way ADDR_TABLE_INDEX* values have been defined + * in emif.h compared to LPDDR2_DENSITY_* values + * The table is layed out in the increasing order of density + * (ignoring type). The exceptions 1GS2 and 2GS2 have been placed + * at the end + */ + if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_1Gb)) + index = ADDR_TABLE_INDEX1GS2; + else if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_2Gb)) + index = ADDR_TABLE_INDEX2GS2; + else + index = density; + + debug("emif: addressing table index %d\n", index); + + return index; +} + +/* + * Find the the right timing table from the array of timing + * tables of the device using DDR clock frequency + */ +static const struct lpddr2_ac_timings *get_timings_table(const struct + lpddr2_ac_timings const *const *device_timings, + u32 freq) +{ + u32 i, temp, freq_nearest; + const struct lpddr2_ac_timings *timings = 0; + + emif_assert(freq <= MAX_LPDDR2_FREQ); + emif_assert(device_timings); + + /* + * Start with the maximum allowed frequency - that is always safe + */ + freq_nearest = MAX_LPDDR2_FREQ; + /* + * Find the timings table that has the max frequency value: + * i. Above or equal to the DDR frequency - safe + * ii. The lowest that satisfies condition (i) - optimal + */ + for (i = 0; (i < MAX_NUM_SPEEDBINS) && device_timings[i]; i++) { + temp = device_timings[i]->max_freq; + if ((temp >= freq) && (temp <= freq_nearest)) { + freq_nearest = temp; + timings = device_timings[i]; + } + } + debug("emif: timings table: %d\n", freq_nearest); + return timings; +} + +/* + * Finds the value of emif_sdram_config_reg + * All parameters are programmed based on the device on CS0. + * If there is a device on CS1, it will be same as that on CS0 or + * it will be NVM. We don't support NVM yet. + * If cs1_device pointer is NULL it is assumed that there is no device + * on CS1 + */ +static u32 get_sdram_config_reg(const struct lpddr2_device_details *cs0_device, + const struct lpddr2_device_details *cs1_device, + const struct lpddr2_addressing *addressing, + u8 RL) +{ + u32 config_reg = 0; + + config_reg |= (cs0_device->type + 4) << EMIF_REG_SDRAM_TYPE_SHIFT; + config_reg |= EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING << + EMIF_REG_IBANK_POS_SHIFT; + + config_reg |= cs0_device->io_width << EMIF_REG_NARROW_MODE_SHIFT; + + config_reg |= RL << EMIF_REG_CL_SHIFT; + + config_reg |= addressing->row_sz[cs0_device->io_width] << + EMIF_REG_ROWSIZE_SHIFT; + + config_reg |= addressing->num_banks << EMIF_REG_IBANK_SHIFT; + + config_reg |= (cs1_device ? EBANK_CS1_EN : EBANK_CS1_DIS) << + EMIF_REG_EBANK_SHIFT; + + config_reg |= addressing->col_sz[cs0_device->io_width] << + EMIF_REG_PAGESIZE_SHIFT; + + return config_reg; +} + +static u32 get_sdram_ref_ctrl(u32 freq, + const struct lpddr2_addressing *addressing) +{ + u32 ref_ctrl = 0, val = 0, freq_khz; + freq_khz = freq / 1000; + /* + * refresh rate to be set is 'tREFI * freq in MHz + * division by 10000 to account for khz and x10 in t_REFI_us_x10 + */ + val = addressing->t_REFI_us_x10 * freq_khz / 10000; + ref_ctrl |= val << EMIF_REG_REFRESH_RATE_SHIFT; + + return ref_ctrl; +} + +static u32 get_sdram_tim_1_reg(const struct lpddr2_ac_timings *timings, + const struct lpddr2_min_tck *min_tck, + const struct lpddr2_addressing *addressing) +{ + u32 tim1 = 0, val = 0; + val = max(min_tck->tWTR, ns_x2_2_cycles(timings->tWTRx2)) - 1; + tim1 |= val << EMIF_REG_T_WTR_SHIFT; + + if (addressing->num_banks == BANKS8) + val = (timings->tFAW * (*T_den) + 4 * (*T_num) - 1) / + (4 * (*T_num)) - 1; + else + val = max(min_tck->tRRD, ns_2_cycles(timings->tRRD)) - 1; + + tim1 |= val << EMIF_REG_T_RRD_SHIFT; + + val = ns_2_cycles(timings->tRASmin + timings->tRPab) - 1; + tim1 |= val << EMIF_REG_T_RC_SHIFT; + + val = max(min_tck->tRAS_MIN, ns_2_cycles(timings->tRASmin)) - 1; + tim1 |= val << EMIF_REG_T_RAS_SHIFT; + + val = max(min_tck->tWR, ns_2_cycles(timings->tWR)) - 1; + tim1 |= val << EMIF_REG_T_WR_SHIFT; + + val = max(min_tck->tRCD, ns_2_cycles(timings->tRCD)) - 1; + tim1 |= val << EMIF_REG_T_RCD_SHIFT; + + val = max(min_tck->tRP_AB, ns_2_cycles(timings->tRPab)) - 1; + tim1 |= val << EMIF_REG_T_RP_SHIFT; + + return tim1; +} + +static u32 get_sdram_tim_2_reg(const struct lpddr2_ac_timings *timings, + const struct lpddr2_min_tck *min_tck) +{ + u32 tim2 = 0, val = 0; + val = max(min_tck->tCKE, timings->tCKE) - 1; + tim2 |= val << EMIF_REG_T_CKE_SHIFT; + + val = max(min_tck->tRTP, ns_x2_2_cycles(timings->tRTPx2)) - 1; + tim2 |= val << EMIF_REG_T_RTP_SHIFT; + + /* + * tXSRD = tRFCab + 10 ns. XSRD and XSNR should have the + * same value + */ + val = ns_2_cycles(timings->tXSR) - 1; + tim2 |= val << EMIF_REG_T_XSRD_SHIFT; + tim2 |= val << EMIF_REG_T_XSNR_SHIFT; + + val = max(min_tck->tXP, ns_x2_2_cycles(timings->tXPx2)) - 1; + tim2 |= val << EMIF_REG_T_XP_SHIFT; + + return tim2; +} + +static u32 get_sdram_tim_3_reg(const struct lpddr2_ac_timings *timings, + const struct lpddr2_min_tck *min_tck, + const struct lpddr2_addressing *addressing) +{ + u32 tim3 = 0, val = 0; + val = min(timings->tRASmax * 10 / addressing->t_REFI_us_x10 - 1, 0xF); + tim3 |= val << EMIF_REG_T_RAS_MAX_SHIFT; + + val = ns_2_cycles(timings->tRFCab) - 1; + tim3 |= val << EMIF_REG_T_RFC_SHIFT; + + val = ns_x2_2_cycles(timings->tDQSCKMAXx2) - 1; + tim3 |= val << EMIF_REG_T_TDQSCKMAX_SHIFT; + + val = ns_2_cycles(timings->tZQCS) - 1; + tim3 |= val << EMIF_REG_ZQ_ZQCS_SHIFT; + + val = max(min_tck->tCKESR, ns_2_cycles(timings->tCKESR)) - 1; + tim3 |= val << EMIF_REG_T_CKESR_SHIFT; + + return tim3; +} + +static u32 get_zq_config_reg(const struct lpddr2_device_details *cs1_device, + const struct lpddr2_addressing *addressing, + u8 volt_ramp) +{ + u32 zq = 0, val = 0; + if (volt_ramp) + val = + EMIF_ZQCS_INTERVAL_DVFS_IN_US * 10 / + addressing->t_REFI_us_x10; + else + val = + EMIF_ZQCS_INTERVAL_NORMAL_IN_US * 10 / + addressing->t_REFI_us_x10; + zq |= val << EMIF_REG_ZQ_REFINTERVAL_SHIFT; + + zq |= (REG_ZQ_ZQCL_MULT - 1) << EMIF_REG_ZQ_ZQCL_MULT_SHIFT; + + zq |= (REG_ZQ_ZQINIT_MULT - 1) << EMIF_REG_ZQ_ZQINIT_MULT_SHIFT; + + zq |= REG_ZQ_SFEXITEN_ENABLE << EMIF_REG_ZQ_SFEXITEN_SHIFT; + + /* + * Assuming that two chipselects have a single calibration resistor + * If there are indeed two calibration resistors, then this flag should + * be enabled to take advantage of dual calibration feature. + * This data should ideally come from board files. But considering + * that none of the boards today have calibration resistors per CS, + * it would be an unnecessary overhead. + */ + zq |= REG_ZQ_DUALCALEN_DISABLE << EMIF_REG_ZQ_DUALCALEN_SHIFT; + + zq |= REG_ZQ_CS0EN_ENABLE << EMIF_REG_ZQ_CS0EN_SHIFT; + + zq |= (cs1_device ? 1 : 0) << EMIF_REG_ZQ_CS1EN_SHIFT; + + return zq; +} + +static u32 get_temp_alert_config(const struct lpddr2_device_details *cs1_device, + const struct lpddr2_addressing *addressing, + u8 is_derated) +{ + u32 alert = 0, interval; + interval = + TEMP_ALERT_POLL_INTERVAL_MS * 10000 / addressing->t_REFI_us_x10; + if (is_derated) + interval *= 4; + alert |= interval << EMIF_REG_TA_REFINTERVAL_SHIFT; + + alert |= TEMP_ALERT_CONFIG_DEVCT_1 << EMIF_REG_TA_DEVCNT_SHIFT; + + alert |= TEMP_ALERT_CONFIG_DEVWDT_32 << EMIF_REG_TA_DEVWDT_SHIFT; + + alert |= 1 << EMIF_REG_TA_SFEXITEN_SHIFT; + + alert |= 1 << EMIF_REG_TA_CS0EN_SHIFT; + + alert |= (cs1_device ? 1 : 0) << EMIF_REG_TA_CS1EN_SHIFT; + + return alert; +} + +static u32 get_read_idle_ctrl_reg(u8 volt_ramp) +{ + u32 idle = 0, val = 0; + if (volt_ramp) + val = ns_2_cycles(READ_IDLE_INTERVAL_DVFS) / 64 - 1; + else + /*Maximum value in normal conditions - suggested by hw team */ + val = 0x1FF; + idle |= val << EMIF_REG_READ_IDLE_INTERVAL_SHIFT; + + idle |= EMIF_REG_READ_IDLE_LEN_VAL << EMIF_REG_READ_IDLE_LEN_SHIFT; + + return idle; +} + +static u32 get_ddr_phy_ctrl_1(u32 freq, u8 RL) +{ + u32 phy = 0, val = 0; + + phy |= (RL + 2) << EMIF_REG_READ_LATENCY_SHIFT; + + if (freq <= 100000000) + val = EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS; + else if (freq <= 200000000) + val = EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ; + else + val = EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ; + phy |= val << EMIF_REG_DLL_SLAVE_DLY_CTRL_SHIFT; + + /* Other fields are constant magic values. Hardcode them together */ + phy |= EMIF_DDR_PHY_CTRL_1_BASE_VAL << + EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT; + + return phy; +} + +static u32 get_emif_mem_size(struct emif_device_details *devices) +{ + u32 size_mbytes = 0, temp; + + if (!devices) + return 0; + + if (devices->cs0_device_details) { + temp = devices->cs0_device_details->density; + size_mbytes += lpddr2_density_2_size_in_mbytes[temp]; + } + + if (devices->cs1_device_details) { + temp = devices->cs1_device_details->density; + size_mbytes += lpddr2_density_2_size_in_mbytes[temp]; + } + /* convert to bytes */ + return size_mbytes << 20; +} + +/* Gets the encoding corresponding to a given DMM section size */ +u32 get_dmm_section_size_map(u32 section_size) +{ + /* + * Section size mapping: + * 0x0: 16-MiB section + * 0x1: 32-MiB section + * 0x2: 64-MiB section + * 0x3: 128-MiB section + * 0x4: 256-MiB section + * 0x5: 512-MiB section + * 0x6: 1-GiB section + * 0x7: 2-GiB section + */ + section_size >>= 24; /* divide by 16 MB */ + return log_2_n_round_down(section_size); +} + +static void emif_calculate_regs( + const struct emif_device_details *emif_dev_details, + u32 freq, struct emif_regs *regs) +{ + u32 temp, sys_freq; + const struct lpddr2_addressing *addressing; + const struct lpddr2_ac_timings *timings; + const struct lpddr2_min_tck *min_tck; + const struct lpddr2_device_details *cs0_dev_details = + emif_dev_details->cs0_device_details; + const struct lpddr2_device_details *cs1_dev_details = + emif_dev_details->cs1_device_details; + const struct lpddr2_device_timings *cs0_dev_timings = + emif_dev_details->cs0_device_timings; + + emif_assert(emif_dev_details); + emif_assert(regs); + /* + * You can not have a device on CS1 without one on CS0 + * So configuring EMIF without a device on CS0 doesn't + * make sense + */ + emif_assert(cs0_dev_details); + emif_assert(cs0_dev_details->type != LPDDR2_TYPE_NVM); + /* + * If there is a device on CS1 it should be same type as CS0 + * (or NVM. But NVM is not supported in this driver yet) + */ + emif_assert((cs1_dev_details == NULL) || + (cs1_dev_details->type == LPDDR2_TYPE_NVM) || + (cs0_dev_details->type == cs1_dev_details->type)); + emif_assert(freq <= MAX_LPDDR2_FREQ); + + set_ddr_clk_period(freq); + + /* + * The device on CS0 is used for all timing calculations + * There is only one set of registers for timings per EMIF. So, if the + * second CS(CS1) has a device, it should have the same timings as the + * device on CS0 + */ + timings = get_timings_table(cs0_dev_timings->ac_timings, freq); + emif_assert(timings); + min_tck = cs0_dev_timings->min_tck; + + temp = addressing_table_index(cs0_dev_details->type, + cs0_dev_details->density, + cs0_dev_details->io_width); + + emif_assert((temp >= 0)); + addressing = &(addressing_table[temp]); + emif_assert(addressing); + + sys_freq = get_sys_clk_freq(); + + regs->sdram_config_init = get_sdram_config_reg(cs0_dev_details, + cs1_dev_details, + addressing, RL_BOOT); + + regs->sdram_config = get_sdram_config_reg(cs0_dev_details, + cs1_dev_details, + addressing, RL_FINAL); + + regs->ref_ctrl = get_sdram_ref_ctrl(freq, addressing); + + regs->sdram_tim1 = get_sdram_tim_1_reg(timings, min_tck, addressing); + + regs->sdram_tim2 = get_sdram_tim_2_reg(timings, min_tck); + + regs->sdram_tim3 = get_sdram_tim_3_reg(timings, min_tck, addressing); + + regs->read_idle_ctrl = get_read_idle_ctrl_reg(LPDDR2_VOLTAGE_STABLE); + + regs->temp_alert_config = + get_temp_alert_config(cs1_dev_details, addressing, 0); + + regs->zq_config = get_zq_config_reg(cs1_dev_details, addressing, + LPDDR2_VOLTAGE_STABLE); + + regs->emif_ddr_phy_ctlr_1_init = + get_ddr_phy_ctrl_1(sys_freq / 2, RL_BOOT); + + regs->emif_ddr_phy_ctlr_1 = + get_ddr_phy_ctrl_1(freq, RL_FINAL); + + regs->freq = freq; + + print_timing_reg(regs->sdram_config_init); + print_timing_reg(regs->sdram_config); + print_timing_reg(regs->ref_ctrl); + print_timing_reg(regs->sdram_tim1); + print_timing_reg(regs->sdram_tim2); + print_timing_reg(regs->sdram_tim3); + print_timing_reg(regs->read_idle_ctrl); + print_timing_reg(regs->temp_alert_config); + print_timing_reg(regs->zq_config); + print_timing_reg(regs->emif_ddr_phy_ctlr_1); + print_timing_reg(regs->emif_ddr_phy_ctlr_1_init); +} +#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ + +#ifdef CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION +const char *get_lpddr2_type(u8 type_id) +{ + switch (type_id) { + case LPDDR2_TYPE_S4: + return "LPDDR2-S4"; + case LPDDR2_TYPE_S2: + return "LPDDR2-S2"; + default: + return NULL; + } +} + +const char *get_lpddr2_io_width(u8 width_id) +{ + switch (width_id) { + case LPDDR2_IO_WIDTH_8: + return "x8"; + case LPDDR2_IO_WIDTH_16: + return "x16"; + case LPDDR2_IO_WIDTH_32: + return "x32"; + default: + return NULL; + } +} + +const char *get_lpddr2_manufacturer(u32 manufacturer) +{ + switch (manufacturer) { + case LPDDR2_MANUFACTURER_SAMSUNG: + return "Samsung"; + case LPDDR2_MANUFACTURER_QIMONDA: + return "Qimonda"; + case LPDDR2_MANUFACTURER_ELPIDA: + return "Elpida"; + case LPDDR2_MANUFACTURER_ETRON: + return "Etron"; + case LPDDR2_MANUFACTURER_NANYA: + return "Nanya"; + case LPDDR2_MANUFACTURER_HYNIX: + return "Hynix"; + case LPDDR2_MANUFACTURER_MOSEL: + return "Mosel"; + case LPDDR2_MANUFACTURER_WINBOND: + return "Winbond"; + case LPDDR2_MANUFACTURER_ESMT: + return "ESMT"; + case LPDDR2_MANUFACTURER_SPANSION: + return "Spansion"; + case LPDDR2_MANUFACTURER_SST: + return "SST"; + case LPDDR2_MANUFACTURER_ZMOS: + return "ZMOS"; + case LPDDR2_MANUFACTURER_INTEL: + return "Intel"; + case LPDDR2_MANUFACTURER_NUMONYX: + return "Numonyx"; + case LPDDR2_MANUFACTURER_MICRON: + return "Micron"; + default: + return NULL; + } +} + +static void display_sdram_details(u32 emif_nr, u32 cs, + struct lpddr2_device_details *device) +{ + const char *mfg_str; + const char *type_str; + char density_str[10]; + u32 density; + + debug("EMIF%d CS%d\t", emif_nr, cs); + + if (!device) { + debug("None\n"); + return; + } + + mfg_str = get_lpddr2_manufacturer(device->manufacturer); + type_str = get_lpddr2_type(device->type); + + density = lpddr2_density_2_size_in_mbytes[device->density]; + if ((density / 1024 * 1024) == density) { + density /= 1024; + sprintf(density_str, "%d GB", density); + } else + sprintf(density_str, "%d MB", density); + if (mfg_str && type_str) + debug("%s\t\t%s\t%s\n", mfg_str, type_str, density_str); +} + +static u8 is_lpddr2_sdram_present(u32 base, u32 cs, + struct lpddr2_device_details *lpddr2_device) +{ + u32 mr = 0, temp; + + mr = get_mr(base, cs, LPDDR2_MR0); + if (mr > 0xFF) { + /* Mode register value bigger than 8 bit */ + return 0; + } + + temp = (mr & LPDDR2_MR0_DI_MASK) >> LPDDR2_MR0_DI_SHIFT; + if (temp) { + /* Not SDRAM */ + return 0; + } + temp = (mr & LPDDR2_MR0_DNVI_MASK) >> LPDDR2_MR0_DNVI_SHIFT; + + if (temp) { + /* DNV supported - But DNV is only supported for NVM */ + return 0; + } + + mr = get_mr(base, cs, LPDDR2_MR4); + if (mr > 0xFF) { + /* Mode register value bigger than 8 bit */ + return 0; + } + + mr = get_mr(base, cs, LPDDR2_MR5); + if (mr >= 0xFF) { + /* Mode register value bigger than 8 bit */ + return 0; + } + + if (!get_lpddr2_manufacturer(mr)) { + /* Manufacturer not identified */ + return 0; + } + lpddr2_device->manufacturer = mr; + + mr = get_mr(base, cs, LPDDR2_MR6); + if (mr >= 0xFF) { + /* Mode register value bigger than 8 bit */ + return 0; + } + + mr = get_mr(base, cs, LPDDR2_MR7); + if (mr >= 0xFF) { + /* Mode register value bigger than 8 bit */ + return 0; + } + + mr = get_mr(base, cs, LPDDR2_MR8); + if (mr >= 0xFF) { + /* Mode register value bigger than 8 bit */ + return 0; + } + + temp = (mr & MR8_TYPE_MASK) >> MR8_TYPE_SHIFT; + if (!get_lpddr2_type(temp)) { + /* Not SDRAM */ + return 0; + } + lpddr2_device->type = temp; + + temp = (mr & MR8_DENSITY_MASK) >> MR8_DENSITY_SHIFT; + if (temp > LPDDR2_DENSITY_32Gb) { + /* Density not supported */ + return 0; + } + lpddr2_device->density = temp; + + temp = (mr & MR8_IO_WIDTH_MASK) >> MR8_IO_WIDTH_SHIFT; + if (!get_lpddr2_io_width(temp)) { + /* IO width unsupported value */ + return 0; + } + lpddr2_device->io_width = temp; + + /* + * If all the above tests pass we should + * have a device on this chip-select + */ + return 1; +} + +struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs, + struct lpddr2_device_details *lpddr2_dev_details) +{ + u32 phy; + u32 base = (emif_nr == 1) ? EMIF1_BASE : EMIF2_BASE; + + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + if (!lpddr2_dev_details) + return NULL; + + /* Do the minimum init for mode register accesses */ + if (!running_from_sdram()) { + phy = get_ddr_phy_ctrl_1(get_sys_clk_freq() / 2, RL_BOOT); + writel(phy, &emif->emif_ddr_phy_ctrl_1); + } + + if (!(is_lpddr2_sdram_present(base, cs, lpddr2_dev_details))) + return NULL; + + display_sdram_details(emif_num(base), cs, lpddr2_dev_details); + + return lpddr2_dev_details; +} +#endif /* CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION */ + +static void do_sdram_init(u32 base) +{ + const struct emif_regs *regs; + u32 in_sdram, emif_nr; + + debug(">>do_sdram_init() %x\n", base); + + in_sdram = running_from_sdram(); + emif_nr = (base == EMIF1_BASE) ? 1 : 2; + +#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS + emif_get_reg_dump(emif_nr, ®s); + if (!regs) { + debug("EMIF: reg dump not provided\n"); + return; + } +#else + /* + * The user has not provided the register values. We need to + * calculate it based on the timings and the DDR frequency + */ + struct emif_device_details dev_details; + struct emif_regs calculated_regs; + + /* + * Get device details: + * - Discovered if CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION is set + * - Obtained from user otherwise + */ + struct lpddr2_device_details cs0_dev_details, cs1_dev_details; + emif_reset_phy(base); + dev_details.cs0_device_details = emif_get_device_details(base, CS0, + &cs0_dev_details); + dev_details.cs1_device_details = emif_get_device_details(base, CS1, + &cs1_dev_details); + emif_reset_phy(base); + + /* Return if no devices on this EMIF */ + if (!dev_details.cs0_device_details && + !dev_details.cs1_device_details) { + emif_sizes[emif_nr - 1] = 0; + return; + } + + if (!in_sdram) + emif_sizes[emif_nr - 1] = get_emif_mem_size(&dev_details); + + /* + * Get device timings: + * - Default timings specified by JESD209-2 if + * CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS is set + * - Obtained from user otherwise + */ + emif_get_device_timings(emif_nr, &dev_details.cs0_device_timings, + &dev_details.cs1_device_timings); + + /* Calculate the register values */ + emif_calculate_regs(&dev_details, omap_ddr_clk(), &calculated_regs); + regs = &calculated_regs; +#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ + + /* + * Initializing the LPDDR2 device can not happen from SDRAM. + * Changing the timing registers in EMIF can happen(going from one + * OPP to another) + */ + if (!in_sdram) + lpddr2_init(base, regs); + + /* Write to the shadow registers */ + emif_update_timings(base, regs); + + debug("<<do_sdram_init() %x\n", base); +} + +void emif_post_init_config(u32 base) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + u32 omap_rev = omap_revision(); + + if (omap_rev == OMAP5430_ES1_0) + return; + + /* reset phy on ES2.0 */ + if (omap_rev == OMAP4430_ES2_0) + emif_reset_phy(base); + + /* Put EMIF back in smart idle on ES1.0 */ + if (omap_rev == OMAP4430_ES1_0) + writel(0x80000000, &emif->emif_pwr_mgmt_ctrl); +} + +void dmm_init(u32 base) +{ + const struct dmm_lisa_map_regs *lisa_map_regs; + +#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS + emif_get_dmm_regs(&lisa_map_regs); +#else + u32 emif1_size, emif2_size, mapped_size, section_map = 0; + u32 section_cnt, sys_addr; + struct dmm_lisa_map_regs lis_map_regs_calculated = {0}; + + mapped_size = 0; + section_cnt = 3; + sys_addr = CONFIG_SYS_SDRAM_BASE; + emif1_size = emif_sizes[0]; + emif2_size = emif_sizes[1]; + debug("emif1_size 0x%x emif2_size 0x%x\n", emif1_size, emif2_size); + + if (!emif1_size && !emif2_size) + return; + + /* symmetric interleaved section */ + if (emif1_size && emif2_size) { + mapped_size = min(emif1_size, emif2_size); + section_map = DMM_LISA_MAP_INTERLEAVED_BASE_VAL; + section_map |= 0 << EMIF_SDRC_ADDR_SHIFT; + /* only MSB */ + section_map |= (sys_addr >> 24) << + EMIF_SYS_ADDR_SHIFT; + section_map |= get_dmm_section_size_map(mapped_size * 2) + << EMIF_SYS_SIZE_SHIFT; + lis_map_regs_calculated.dmm_lisa_map_3 = section_map; + emif1_size -= mapped_size; + emif2_size -= mapped_size; + sys_addr += (mapped_size * 2); + section_cnt--; + } + + /* + * Single EMIF section(we can have a maximum of 1 single EMIF + * section- either EMIF1 or EMIF2 or none, but not both) + */ + if (emif1_size) { + section_map = DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL; + section_map |= get_dmm_section_size_map(emif1_size) + << EMIF_SYS_SIZE_SHIFT; + /* only MSB */ + section_map |= (mapped_size >> 24) << + EMIF_SDRC_ADDR_SHIFT; + /* only MSB */ + section_map |= (sys_addr >> 24) << EMIF_SYS_ADDR_SHIFT; + section_cnt--; + } + if (emif2_size) { + section_map = DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL; + section_map |= get_dmm_section_size_map(emif2_size) << + EMIF_SYS_SIZE_SHIFT; + /* only MSB */ + section_map |= mapped_size >> 24 << EMIF_SDRC_ADDR_SHIFT; + /* only MSB */ + section_map |= sys_addr >> 24 << EMIF_SYS_ADDR_SHIFT; + section_cnt--; + } + + if (section_cnt == 2) { + /* Only 1 section - either symmetric or single EMIF */ + lis_map_regs_calculated.dmm_lisa_map_3 = section_map; + lis_map_regs_calculated.dmm_lisa_map_2 = 0; + lis_map_regs_calculated.dmm_lisa_map_1 = 0; + } else { + /* 2 sections - 1 symmetric, 1 single EMIF */ + lis_map_regs_calculated.dmm_lisa_map_2 = section_map; + lis_map_regs_calculated.dmm_lisa_map_1 = 0; + } + + /* TRAP for invalid TILER mappings in section 0 */ + lis_map_regs_calculated.dmm_lisa_map_0 = DMM_LISA_MAP_0_INVAL_ADDR_TRAP; + + lisa_map_regs = &lis_map_regs_calculated; +#endif + struct dmm_lisa_map_regs *hw_lisa_map_regs = + (struct dmm_lisa_map_regs *)base; + + writel(0, &hw_lisa_map_regs->dmm_lisa_map_3); + writel(0, &hw_lisa_map_regs->dmm_lisa_map_2); + writel(0, &hw_lisa_map_regs->dmm_lisa_map_1); + writel(0, &hw_lisa_map_regs->dmm_lisa_map_0); + + writel(lisa_map_regs->dmm_lisa_map_3, + &hw_lisa_map_regs->dmm_lisa_map_3); + writel(lisa_map_regs->dmm_lisa_map_2, + &hw_lisa_map_regs->dmm_lisa_map_2); + writel(lisa_map_regs->dmm_lisa_map_1, + &hw_lisa_map_regs->dmm_lisa_map_1); + writel(lisa_map_regs->dmm_lisa_map_0, + &hw_lisa_map_regs->dmm_lisa_map_0); + + if (omap_revision() >= OMAP4460_ES1_0) { + hw_lisa_map_regs = + (struct dmm_lisa_map_regs *)MA_BASE; + + writel(lisa_map_regs->dmm_lisa_map_3, + &hw_lisa_map_regs->dmm_lisa_map_3); + writel(lisa_map_regs->dmm_lisa_map_2, + &hw_lisa_map_regs->dmm_lisa_map_2); + writel(lisa_map_regs->dmm_lisa_map_1, + &hw_lisa_map_regs->dmm_lisa_map_1); + writel(lisa_map_regs->dmm_lisa_map_0, + &hw_lisa_map_regs->dmm_lisa_map_0); + } +} + +/* + * SDRAM initialization: + * SDRAM initialization has two parts: + * 1. Configuring the SDRAM device + * 2. Update the AC timings related parameters in the EMIF module + * (1) should be done only once and should not be done while we are + * running from SDRAM. + * (2) can and should be done more than once if OPP changes. + * Particularly, this may be needed when we boot without SPL and + * and using Configuration Header(CH). ROM code supports only at 50% OPP + * at boot (low power boot). So u-boot has to switch to OPP100 and update + * the frequency. So, + * Doing (1) and (2) makes sense - first time initialization + * Doing (2) and not (1) makes sense - OPP change (when using CH) + * Doing (1) and not (2) doen't make sense + * See do_sdram_init() for the details + */ +void sdram_init(void) +{ + u32 in_sdram, size_prog, size_detect; + + debug(">>sdram_init()\n"); + + if (omap_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL) + return; + + in_sdram = running_from_sdram(); + debug("in_sdram = %d\n", in_sdram); + + if (!in_sdram) + bypass_dpll(&prcm->cm_clkmode_dpll_core); + + + do_sdram_init(EMIF1_BASE); + do_sdram_init(EMIF2_BASE); + + if (!in_sdram) { + dmm_init(DMM_BASE); + emif_post_init_config(EMIF1_BASE); + emif_post_init_config(EMIF2_BASE); + } + + /* for the shadow registers to take effect */ + freq_update_core(); + + /* Do some testing after the init */ + if (!in_sdram) { + size_prog = omap_sdram_size(); + size_detect = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, + size_prog); + /* Compare with the size programmed */ + if (size_detect != size_prog) { + printf("SDRAM: identified size not same as expected" + " size identified: %x expected: %x\n", + size_detect, + size_prog); + } else + debug("get_ram_size() successful"); + } + + debug("<<sdram_init()\n"); +} diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c new file mode 100644 index 000000000..f65705db1 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -0,0 +1,267 @@ +/* + * + * Common functions for OMAP4/5 based boards + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Author : + * Aneesh V <aneesh@ti.com> + * Steve Sakoman <steve@sakoman.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/sizes.h> +#include <asm/emif.h> +#include <asm/omap_common.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * This is used to verify if the configuration header + * was executed by rom code prior to control of transfer + * to the bootloader. SPL is responsible for saving and + * passing the boot_params pointer to the u-boot. + */ +struct omap_boot_parameters boot_params __attribute__ ((section(".data"))); + +#ifdef CONFIG_SPL_BUILD +/* + * We use static variables because global data is not ready yet. + * Initialized data is available in SPL right from the beginning. + * We would not typically need to save these parameters in regular + * U-Boot. This is needed only in SPL at the moment. + */ +u32 omap_bootmode = MMCSD_MODE_FAT; + +u32 omap_boot_device(void) +{ + return (u32) (boot_params.omap_bootdevice); +} + +u32 omap_boot_mode(void) +{ + return omap_bootmode; +} +#endif + +void do_set_mux(u32 base, struct pad_conf_entry const *array, int size) +{ + int i; + struct pad_conf_entry *pad = (struct pad_conf_entry *) array; + + for (i = 0; i < size; i++, pad++) + writew(pad->val, base + pad->offset); +} + +static void set_mux_conf_regs(void) +{ + switch (omap_hw_init_context()) { + case OMAP_INIT_CONTEXT_SPL: + set_muxconf_regs_essential(); + break; + case OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL: +#ifdef CONFIG_SYS_ENABLE_PADS_ALL + set_muxconf_regs_non_essential(); +#endif + break; + case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR: + case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH: + set_muxconf_regs_essential(); +#ifdef CONFIG_SYS_ENABLE_PADS_ALL + set_muxconf_regs_non_essential(); +#endif + break; + } +} + +u32 cortex_rev(void) +{ + + unsigned int rev; + + /* Read Main ID Register (MIDR) */ + asm ("mrc p15, 0, %0, c0, c0, 0" : "=r" (rev)); + + return rev; +} + +void omap_rev_string(char *omap_rev_string) +{ + u32 omap_rev = omap_revision(); + u32 omap_variant = (omap_rev & 0xFFFF0000) >> 16; + u32 major_rev = (omap_rev & 0x00000F00) >> 8; + u32 minor_rev = (omap_rev & 0x000000F0) >> 4; + + sprintf(omap_rev_string, "OMAP%x ES%x.%x", omap_variant, major_rev, + minor_rev); +} + +#ifdef CONFIG_SPL_BUILD +static void init_boot_params(void) +{ + boot_params_ptr = (u32 *) &boot_params; +} +#endif + +/* + * Routine: s_init + * Description: Does early system init of watchdog, muxing, andclocks + * Watchdog disable is done always. For the rest what gets done + * depends on the boot mode in which this function is executed + * 1. s_init of SPL running from SRAM + * 2. s_init of U-Boot running from FLASH + * 3. s_init of U-Boot loaded to SDRAM by SPL + * 4. s_init of U-Boot loaded to SDRAM by ROM code using the + * Configuration Header feature + * Please have a look at the respective functions to see what gets + * done in each of these cases + * This function is called with SRAM stack. + */ +void s_init(void) +{ + init_omap_revision(); + watchdog_init(); + set_mux_conf_regs(); +#ifdef CONFIG_SPL_BUILD + setup_clocks_for_console(); + preloader_console_init(); + do_io_settings(); +#endif + prcm_init(); +#ifdef CONFIG_SPL_BUILD + /* For regular u-boot sdram_init() is called from dram_init() */ + sdram_init(); + init_boot_params(); +#endif +} + +/* + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + */ +void wait_for_command_complete(struct watchdog *wd_base) +{ + int pending = 1; + do { + pending = readl(&wd_base->wwps); + } while (pending); +} + +/* + * Routine: watchdog_init + * Description: Shut down watch dogs + */ +void watchdog_init(void) +{ + struct watchdog *wd2_base = (struct watchdog *)WDT2_BASE; + + writel(WD_UNLOCK1, &wd2_base->wspr); + wait_for_command_complete(wd2_base); + writel(WD_UNLOCK2, &wd2_base->wspr); +} + + +/* + * This function finds the SDRAM size available in the system + * based on DMM section configurations + * This is needed because the size of memory installed may be + * different on different versions of the board + */ +u32 omap_sdram_size(void) +{ + u32 section, i, total_size = 0, size, addr; + + for (i = 0; i < 4; i++) { + section = __raw_readl(DMM_BASE + i*4); + addr = section & EMIF_SYS_ADDR_MASK; + /* See if the address is valid */ + if ((addr >= DRAM_ADDR_SPACE_START) && + (addr < DRAM_ADDR_SPACE_END)) { + size = ((section & EMIF_SYS_SIZE_MASK) >> + EMIF_SYS_SIZE_SHIFT); + size = 1 << size; + size *= SZ_16M; + total_size += size; + } + } + + return total_size; +} + + +/* + * Routine: dram_init + * Description: sets uboots idea of sdram size + */ +int dram_init(void) +{ + sdram_init(); + gd->ram_size = omap_sdram_size(); + return 0; +} + +/* + * Print board information + */ +int checkboard(void) +{ + puts(sysinfo.board_string); + return 0; +} + +/* +* This function is called by start_armboot. You can reliably use static +* data. Any boot-time function that require static data should be +* called from here +*/ +int arch_cpu_init(void) +{ + return 0; +} + +/* + * get_device_type(): tell if GP/HS/EMU/TST + */ +u32 get_device_type(void) +{ + return 0; +} + +/* + * Print CPU information + */ +int print_cpuinfo(void) +{ + char rev_string_buffer[50]; + + omap_rev_string(rev_string_buffer); + printf("CPU : %s\n", rev_string_buffer); + + return 0; +} +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif diff --git a/arch/arm/cpu/armv7/omap4/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index 91525ecd4..35f38acf5 100644 --- a/arch/arm/cpu/armv7/omap4/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -26,8 +26,8 @@ * MA 02111-1307 USA */ -#include <asm/arch/omap4.h> -#ifdef CONFIG_SPL_BUILD +#include <asm/arch/omap.h> + .global save_boot_params save_boot_params: /* @@ -43,21 +43,40 @@ save_boot_params: cmp r2, r0 blt 1f - /* Store the boot device in omap4_boot_device */ - ldr r2, [r0, #BOOT_DEVICE_OFFSET] @ r1 <- value of boot device + /* + * store the boot params passed from rom code or saved + * and passed by SPL + */ + cmp r0, #0 + beq 1f + ldr r1, =boot_params + str r0, [r1] +#ifdef CONFIG_SPL_BUILD + /* Store the boot device in omap_boot_device */ + ldrb r2, [r0, #BOOT_DEVICE_OFFSET] @ r1 <- value of boot device and r2, #BOOT_DEVICE_MASK - ldr r3, =omap4_boot_device - str r2, [r3] @ omap4_boot_device <- r1 + ldr r3, =boot_params + strb r2, [r3, #BOOT_DEVICE_OFFSET] @ omap_boot_device <- r1 - /* Store the boot mode (raw/FAT) in omap4_boot_mode */ + /* boot mode is passed only for devices that can raw/fat mode */ + cmp r2, #2 + blt 2f + cmp r2, #7 + bgt 2f + /* Store the boot mode (raw/FAT) in omap_boot_mode */ ldr r2, [r0, #DEV_DESC_PTR_OFFSET] @ get the device descriptor ptr ldr r2, [r2, #DEV_DATA_PTR_OFFSET] @ get the pDeviceData ptr ldr r2, [r2, #BOOT_MODE_OFFSET] @ get the boot mode - ldr r3, =omap4_boot_mode + ldr r3, =omap_bootmode str r2, [r3] +#endif +2: + ldrb r2, [r0, #CH_FLAGS_OFFSET] + ldr r3, =boot_params + strb r2, [r3, #CH_FLAGS_OFFSET] 1: bx lr -#endif + .globl lowlevel_init lowlevel_init: diff --git a/arch/arm/cpu/armv7/omap4/mem.c b/arch/arm/cpu/armv7/omap-common/mem-common.c index 878f0e304..878f0e304 100644 --- a/arch/arm/cpu/armv7/omap4/mem.c +++ b/arch/arm/cpu/armv7/omap-common/mem-common.c diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c index 2c59d2b36..d6d7d65ec 100644 --- a/arch/arm/cpu/armv7/omap-common/spl.c +++ b/arch/arm/cpu/armv7/omap-common/spl.c @@ -38,6 +38,7 @@ DECLARE_GLOBAL_DATA_PTR; +u32* boot_params_ptr = NULL; struct spl_image_info spl_image; /* Define global data structure pointer to it*/ @@ -92,12 +93,16 @@ void spl_parse_image_header(const struct image_header *header) static void jump_to_image_no_args(void) { - typedef void (*image_entry_noargs_t)(void)__attribute__ ((noreturn)); + typedef void (*image_entry_noargs_t)(u32 *)__attribute__ ((noreturn)); image_entry_noargs_t image_entry = (image_entry_noargs_t) spl_image.entry_point; debug("image entry point: 0x%X\n", spl_image.entry_point); - image_entry(); + /* Pass the saved boot_params from rom code */ +#if defined(CONFIG_VIRTIO) || defined(CONFIG_ZEBU) + image_entry = 0x80100000; +#endif + image_entry((u32 *)&boot_params_ptr); } void jump_to_image_no_args(void) __attribute__ ((noreturn)); diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile index e7ee0b8c0..83160a28f 100644 --- a/arch/arm/cpu/armv7/omap4/Makefile +++ b/arch/arm/cpu/armv7/omap4/Makefile @@ -25,17 +25,10 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -SOBJS += lowlevel_init.o - -COBJS += board.o +COBJS += sdram_elpida.o +COBJS += hwinit.o COBJS += clocks.o COBJS += emif.o -COBJS += sdram_elpida.o - -ifndef CONFIG_SPL_BUILD -COBJS += mem.o -COBJS += sys_info.o -endif SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c deleted file mode 100644 index 2497e3e72..000000000 --- a/arch/arm/cpu/armv7/omap4/board.c +++ /dev/null @@ -1,384 +0,0 @@ -/* - * - * Common functions for OMAP4 based boards - * - * (C) Copyright 2010 - * Texas Instruments, <www.ti.com> - * - * Author : - * Aneesh V <aneesh@ti.com> - * Steve Sakoman <steve@sakoman.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <asm/armv7.h> -#include <asm/arch/cpu.h> -#include <asm/arch/sys_proto.h> -#include <asm/sizes.h> -#include <asm/arch/emif.h> -#include <asm/arch/gpio.h> -#include "omap4_mux_data.h" - -DECLARE_GLOBAL_DATA_PTR; - -u32 *const omap4_revision = (u32 *)OMAP4_SRAM_SCRATCH_OMAP4_REV; - -static const struct gpio_bank gpio_bank_44xx[6] = { - { (void *)OMAP44XX_GPIO1_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO2_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO3_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO4_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO5_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO6_BASE, METHOD_GPIO_24XX }, -}; - -const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx; - -#ifdef CONFIG_SPL_BUILD -/* - * We use static variables because global data is not ready yet. - * Initialized data is available in SPL right from the beginning. - * We would not typically need to save these parameters in regular - * U-Boot. This is needed only in SPL at the moment. - */ -u32 omap4_boot_device = BOOT_DEVICE_MMC1; -u32 omap4_boot_mode = MMCSD_MODE_FAT; - -u32 omap_boot_device(void) -{ - return omap4_boot_device; -} - -u32 omap_boot_mode(void) -{ - return omap4_boot_mode; -} - -/* - * Some tuning of IOs for optimal power and performance - */ -static void do_io_settings(void) -{ - u32 lpddr2io; - struct control_lpddr2io_regs *lpddr2io_regs = - (struct control_lpddr2io_regs *)LPDDR2_IO_REGS_BASE; - struct omap4_sys_ctrl_regs *const ctrl = - (struct omap4_sys_ctrl_regs *)SYSCTRL_GENERAL_CORE_BASE; - - u32 omap4_rev = omap_revision(); - - if (omap4_rev == OMAP4430_ES1_0) - lpddr2io = CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN; - else if (omap4_rev == OMAP4430_ES2_0) - lpddr2io = CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER; - else - lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN; - - /* EMIF1 */ - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_0); - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1); - /* No pull for GR10 as per hw team's recommendation */ - writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, - &lpddr2io_regs->control_lpddr2io1_2); - writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io1_3); - - /* EMIF2 */ - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0); - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1); - /* No pull for GR10 as per hw team's recommendation */ - writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, - &lpddr2io_regs->control_lpddr2io2_2); - writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io2_3); - - /* - * Some of these settings (TRIM values) come from eFuse and are - * in turn programmed in the eFuse at manufacturing time after - * calibration of the device. Do the software over-ride only if - * the device is not correctly trimmed - */ - if (!(readl(&ctrl->control_std_fuse_opp_bgap) & 0xFFFF)) { - - writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - &ctrl->control_ldosram_iva_voltage_ctrl); - - writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - &ctrl->control_ldosram_mpu_voltage_ctrl); - - writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - &ctrl->control_ldosram_core_voltage_ctrl); - } - - if (!readl(&ctrl->control_efuse_1)) - writel(CONTROL_EFUSE_1_OVERRIDE, &ctrl->control_efuse_1); - - if (!readl(&ctrl->control_efuse_2)) - writel(CONTROL_EFUSE_2_OVERRIDE, &ctrl->control_efuse_2); -} -#endif - -void do_set_mux(u32 base, struct pad_conf_entry const *array, int size) -{ - int i; - struct pad_conf_entry *pad = (struct pad_conf_entry *) array; - - for (i = 0; i < size; i++, pad++) - writew(pad->val, base + pad->offset); -} - -static void set_muxconf_regs_essential(void) -{ - do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential, - sizeof(core_padconf_array_essential) / - sizeof(struct pad_conf_entry)); - - do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential, - sizeof(wkup_padconf_array_essential) / - sizeof(struct pad_conf_entry)); - - if (omap_revision() >= OMAP4460_ES1_0) - do_set_mux(CONTROL_PADCONF_WKUP, - wkup_padconf_array_essential_4460, - sizeof(wkup_padconf_array_essential_4460) / - sizeof(struct pad_conf_entry)); -} - -static void set_mux_conf_regs(void) -{ - switch (omap4_hw_init_context()) { - case OMAP_INIT_CONTEXT_SPL: - set_muxconf_regs_essential(); - break; - case OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL: - set_muxconf_regs_non_essential(); - break; - case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR: - case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH: - set_muxconf_regs_essential(); - set_muxconf_regs_non_essential(); - break; - } -} - -static u32 cortex_a9_rev(void) -{ - - unsigned int rev; - - /* Read Main ID Register (MIDR) */ - asm ("mrc p15, 0, %0, c0, c0, 0" : "=r" (rev)); - - return rev; -} - -static void init_omap4_revision(void) -{ - /* - * For some of the ES2/ES1 boards ID_CODE is not reliable: - * Also, ES1 and ES2 have different ARM revisions - * So use ARM revision for identification - */ - unsigned int arm_rev = cortex_a9_rev(); - - switch (arm_rev) { - case MIDR_CORTEX_A9_R0P1: - *omap4_revision = OMAP4430_ES1_0; - break; - case MIDR_CORTEX_A9_R1P2: - switch (readl(CONTROL_ID_CODE)) { - case OMAP4430_CONTROL_ID_CODE_ES2_0: - *omap4_revision = OMAP4430_ES2_0; - break; - case OMAP4430_CONTROL_ID_CODE_ES2_1: - *omap4_revision = OMAP4430_ES2_1; - break; - case OMAP4430_CONTROL_ID_CODE_ES2_2: - *omap4_revision = OMAP4430_ES2_2; - break; - default: - *omap4_revision = OMAP4430_ES2_0; - break; - } - break; - case MIDR_CORTEX_A9_R1P3: - *omap4_revision = OMAP4430_ES2_3; - break; - case MIDR_CORTEX_A9_R2P10: - switch (readl(CONTROL_ID_CODE)) { - case OMAP4460_CONTROL_ID_CODE_ES1_0: - *omap4_revision = OMAP4460_ES1_0; - break; - case OMAP4460_CONTROL_ID_CODE_ES1_1: - *omap4_revision = OMAP4460_ES1_1; - break; - default: - *omap4_revision = OMAP4460_ES1_0; - break; - } - break; - default: - *omap4_revision = OMAP4430_SILICON_ID_INVALID; - break; - } -} - -void omap_rev_string(char *omap4_rev_string) -{ - u32 omap4_rev = omap_revision(); - u32 omap4_variant = (omap4_rev & 0xFFFF0000) >> 16; - u32 major_rev = (omap4_rev & 0x00000F00) >> 8; - u32 minor_rev = (omap4_rev & 0x000000F0) >> 4; - - sprintf(omap4_rev_string, "OMAP%x ES%x.%x", omap4_variant, major_rev, - minor_rev); -} - -/* - * Routine: s_init - * Description: Does early system init of watchdog, muxing, andclocks - * Watchdog disable is done always. For the rest what gets done - * depends on the boot mode in which this function is executed - * 1. s_init of SPL running from SRAM - * 2. s_init of U-Boot running from FLASH - * 3. s_init of U-Boot loaded to SDRAM by SPL - * 4. s_init of U-Boot loaded to SDRAM by ROM code using the - * Configuration Header feature - * Please have a look at the respective functions to see what gets - * done in each of these cases - * This function is called with SRAM stack. - */ -void s_init(void) -{ - init_omap4_revision(); - watchdog_init(); - set_mux_conf_regs(); -#ifdef CONFIG_SPL_BUILD - setup_clocks_for_console(); - preloader_console_init(); - do_io_settings(); -#endif - prcm_init(); -#ifdef CONFIG_SPL_BUILD - /* For regular u-boot sdram_init() is called from dram_init() */ - sdram_init(); -#endif -} - -/* - * Routine: wait_for_command_complete - * Description: Wait for posting to finish on watchdog - */ -void wait_for_command_complete(struct watchdog *wd_base) -{ - int pending = 1; - do { - pending = readl(&wd_base->wwps); - } while (pending); -} - -/* - * Routine: watchdog_init - * Description: Shut down watch dogs - */ -void watchdog_init(void) -{ - struct watchdog *wd2_base = (struct watchdog *)WDT2_BASE; - - writel(WD_UNLOCK1, &wd2_base->wspr); - wait_for_command_complete(wd2_base); - writel(WD_UNLOCK2, &wd2_base->wspr); -} - - -/* - * This function finds the SDRAM size available in the system - * based on DMM section configurations - * This is needed because the size of memory installed may be - * different on different versions of the board - */ -u32 omap4_sdram_size(void) -{ - u32 section, i, total_size = 0, size, addr; - for (i = 0; i < 4; i++) { - section = __raw_readl(OMAP44XX_DMM_LISA_MAP_BASE + i*4); - addr = section & OMAP44XX_SYS_ADDR_MASK; - /* See if the address is valid */ - if ((addr >= OMAP44XX_DRAM_ADDR_SPACE_START) && - (addr < OMAP44XX_DRAM_ADDR_SPACE_END)) { - size = ((section & OMAP44XX_SYS_SIZE_MASK) >> - OMAP44XX_SYS_SIZE_SHIFT); - size = 1 << size; - size *= SZ_16M; - total_size += size; - } - } - return total_size; -} - - -/* - * Routine: dram_init - * Description: sets uboots idea of sdram size - */ -int dram_init(void) -{ - sdram_init(); - gd->ram_size = omap4_sdram_size(); - - return 0; -} - -/* - * Print board information - */ -int checkboard(void) -{ - puts(sysinfo.board_string); - return 0; -} - -/* -* This function is called by start_armboot. You can reliably use static -* data. Any boot-time function that require static data should be -* called from here -*/ -int arch_cpu_init(void) -{ - return 0; -} - -#ifndef CONFIG_SYS_L2CACHE_OFF -void v7_outer_cache_enable(void) -{ - set_pl310_ctrl_reg(1); -} - -void v7_outer_cache_disable(void) -{ - set_pl310_ctrl_reg(0); -} -#endif - -#ifndef CONFIG_SYS_DCACHE_OFF -void enable_caches(void) -{ - /* Enable D-cache. I-cache is already enabled in start.S */ - dcache_enable(); -} -#endif diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c index 095ba39ae..0886f9243 100644 --- a/arch/arm/cpu/armv7/omap4/clocks.c +++ b/arch/arm/cpu/armv7/omap4/clocks.c @@ -50,7 +50,7 @@ struct omap4_prcm_regs *const prcm = (struct omap4_prcm_regs *)0x4A004100; -static const u32 sys_clk_array[8] = { +const u32 sys_clk_array[8] = { 12000000, /* 12 MHz */ 13000000, /* 13 MHz */ 16800000, /* 16.8 MHz */ @@ -79,14 +79,14 @@ static const struct dpll_params mpu_dpll_params_1840mhz[NUM_SYS_CLKS] = { }; /* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo 4430) */ -static const struct dpll_params mpu_dpll_params_1584mhz[NUM_SYS_CLKS] = { - {66, 0, 1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {792, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {330, 6, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {165, 3, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {396, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {88, 2, 1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {165, 7, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = { + {200, 2, 1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {800, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {619, 12, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {125, 2, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {800, 26, 1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {125, 5, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */ }; /* dpll locked at 1200 MHz - MPU clk at 600 MHz */ @@ -168,7 +168,6 @@ static const struct dpll_params abe_dpll_params_32k_196608khz = { 750, 0, 1, 1, -1, -1, -1, -1 }; - static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { {80, 0, 2, -1, -1, -1, -1, -1}, /* 12 MHz */ {960, 12, 2, -1, -1, -1, -1, -1}, /* 13 MHz */ @@ -179,98 +178,10 @@ static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { {25, 0, 2, -1, -1, -1, -1, -1} /* 38.4 MHz */ }; -static inline u32 __get_sys_clk_index(void) -{ - u32 ind; - /* - * For ES1 the ROM code calibration of sys clock is not reliable - * due to hw issue. So, use hard-coded value. If this value is not - * correct for any board over-ride this function in board file - * From ES2.0 onwards you will get this information from - * CM_SYS_CLKSEL - */ - if (omap_revision() == OMAP4430_ES1_0) - ind = OMAP_SYS_CLK_IND_38_4_MHZ; - else { - /* SYS_CLKSEL - 1 to match the dpll param array indices */ - ind = (readl(&prcm->cm_sys_clksel) & - CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1; - } - return ind; -} - -u32 get_sys_clk_index(void) - __attribute__ ((weak, alias("__get_sys_clk_index"))); - -u32 get_sys_clk_freq(void) -{ - u8 index = get_sys_clk_index(); - return sys_clk_array[index]; -} - -static inline void do_bypass_dpll(u32 *const base) -{ - struct dpll_regs *dpll_regs = (struct dpll_regs *)base; - - clrsetbits_le32(&dpll_regs->cm_clkmode_dpll, - CM_CLKMODE_DPLL_DPLL_EN_MASK, - DPLL_EN_FAST_RELOCK_BYPASS << - CM_CLKMODE_DPLL_EN_SHIFT); -} - -static inline void wait_for_bypass(u32 *const base) -{ - struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; - - if (!wait_on_value(ST_DPLL_CLK_MASK, 0, &dpll_regs->cm_idlest_dpll, - LDELAY)) { - printf("Bypassing DPLL failed %p\n", base); - } -} - -static inline void do_lock_dpll(u32 *const base) -{ - struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; - - clrsetbits_le32(&dpll_regs->cm_clkmode_dpll, - CM_CLKMODE_DPLL_DPLL_EN_MASK, - DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT); -} - -static inline void wait_for_lock(u32 *const base) -{ - struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; - - if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK, - &dpll_regs->cm_idlest_dpll, LDELAY)) { - printf("DPLL locking failed for %p\n", base); - hang(); - } -} - -static void do_setup_dpll(u32 *const base, const struct dpll_params *params, - u8 lock) +void setup_post_dividers(u32 *const base, const struct dpll_params *params) { - u32 temp; struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; - bypass_dpll(base); - - /* Set M & N */ - temp = readl(&dpll_regs->cm_clksel_dpll); - - temp &= ~CM_CLKSEL_DPLL_M_MASK; - temp |= (params->m << CM_CLKSEL_DPLL_M_SHIFT) & CM_CLKSEL_DPLL_M_MASK; - - temp &= ~CM_CLKSEL_DPLL_N_MASK; - temp |= (params->n << CM_CLKSEL_DPLL_N_SHIFT) & CM_CLKSEL_DPLL_N_MASK; - - writel(temp, &dpll_regs->cm_clksel_dpll); - - /* Lock */ - if (lock) - do_lock_dpll(base); - /* Setup post-dividers */ if (params->m2 >= 0) writel(params->m2, &dpll_regs->cm_div_m2_dpll); @@ -284,10 +195,29 @@ static void do_setup_dpll(u32 *const base, const struct dpll_params *params, writel(params->m6, &dpll_regs->cm_div_m6_dpll); if (params->m7 >= 0) writel(params->m7, &dpll_regs->cm_div_m7_dpll); +} - /* Wait till the DPLL locks */ - if (lock) - wait_for_lock(base); +/* + * Lock MPU dpll + * + * Resulting MPU frequencies: + * 4430 ES1.0 : 600 MHz + * 4430 ES2.x : 792 MHz (OPP Turbo) + * 4460 : 920 MHz (OPP Turbo) - DCC disabled + */ +const struct dpll_params *get_mpu_dpll_params(void) +{ + u32 omap_rev, sysclk_ind; + + omap_rev = omap_revision(); + sysclk_ind = get_sys_clk_index(); + + if (omap_rev == OMAP4430_ES1_0) + return &mpu_dpll_params_1200mhz[sysclk_ind]; + else if (omap_rev < OMAP4460_ES1_0) + return &mpu_dpll_params_1600mhz[sysclk_ind]; + else + return &mpu_dpll_params_1840mhz[sysclk_ind]; } const struct dpll_params *get_core_dpll_params(void) @@ -306,228 +236,33 @@ const struct dpll_params *get_core_dpll_params(void) } } -u32 omap4_ddr_clk(void) -{ - u32 ddr_clk, sys_clk_khz; - const struct dpll_params *core_dpll_params; - - sys_clk_khz = get_sys_clk_freq() / 1000; - core_dpll_params = get_core_dpll_params(); - - debug("sys_clk %d\n ", sys_clk_khz * 1000); - - /* Find Core DPLL locked frequency first */ - ddr_clk = sys_clk_khz * 2 * core_dpll_params->m / - (core_dpll_params->n + 1); - /* - * DDR frequency is PHY_ROOT_CLK/2 - * PHY_ROOT_CLK = Fdpll/2/M2 - */ - ddr_clk = ddr_clk / 4 / core_dpll_params->m2; - - ddr_clk *= 1000; /* convert to Hz */ - debug("ddr_clk %d\n ", ddr_clk); - - return ddr_clk; +const struct dpll_params *get_per_dpll_params(void) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &per_dpll_params_1536mhz[sysclk_ind]; } -/* - * Lock MPU dpll - * - * Resulting MPU frequencies: - * 4430 ES1.0 : 600 MHz - * 4430 ES2.x : 792 MHz (OPP Turbo) - * 4460 : 920 MHz (OPP Turbo) - DCC disabled - */ -void configure_mpu_dpll(void) +const struct dpll_params *get_iva_dpll_params(void) { - const struct dpll_params *params; - struct dpll_regs *mpu_dpll_regs; - u32 omap4_rev, sysclk_ind; - - omap4_rev = omap_revision(); - sysclk_ind = get_sys_clk_index(); - - if (omap4_rev == OMAP4430_ES1_0) - params = &mpu_dpll_params_1200mhz[sysclk_ind]; - else if (omap4_rev < OMAP4460_ES1_0) - params = &mpu_dpll_params_1584mhz[sysclk_ind]; - else - params = &mpu_dpll_params_1840mhz[sysclk_ind]; - - /* DCC and clock divider settings for 4460 */ - if (omap4_rev >= OMAP4460_ES1_0) { - mpu_dpll_regs = - (struct dpll_regs *)&prcm->cm_clkmode_dpll_mpu; - bypass_dpll(&prcm->cm_clkmode_dpll_mpu); - clrbits_le32(&prcm->cm_mpu_mpu_clkctrl, - MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK); - setbits_le32(&prcm->cm_mpu_mpu_clkctrl, - MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK); - clrbits_le32(&mpu_dpll_regs->cm_clksel_dpll, - CM_CLKSEL_DCC_EN_MASK); - } - - do_setup_dpll(&prcm->cm_clkmode_dpll_mpu, params, DPLL_LOCK); - debug("MPU DPLL locked\n"); + u32 sysclk_ind = get_sys_clk_index(); + return &iva_dpll_params_1862mhz[sysclk_ind]; } -static void setup_dplls(void) +const struct dpll_params *get_usb_dpll_params(void) { - u32 sysclk_ind, temp; - const struct dpll_params *params; - debug("setup_dplls\n"); - - sysclk_ind = get_sys_clk_index(); - - /* CORE dpll */ - params = get_core_dpll_params(); /* default - safest */ - /* - * Do not lock the core DPLL now. Just set it up. - * Core DPLL will be locked after setting up EMIF - * using the FREQ_UPDATE method(freq_update_core()) - */ - do_setup_dpll(&prcm->cm_clkmode_dpll_core, params, DPLL_NO_LOCK); - /* Set the ratios for CORE_CLK, L3_CLK, L4_CLK */ - temp = (CLKSEL_CORE_X2_DIV_1 << CLKSEL_CORE_SHIFT) | - (CLKSEL_L3_CORE_DIV_2 << CLKSEL_L3_SHIFT) | - (CLKSEL_L4_L3_DIV_2 << CLKSEL_L4_SHIFT); - writel(temp, &prcm->cm_clksel_core); - debug("Core DPLL configured\n"); - - /* lock PER dpll */ - do_setup_dpll(&prcm->cm_clkmode_dpll_per, - &per_dpll_params_1536mhz[sysclk_ind], DPLL_LOCK); - debug("PER DPLL locked\n"); - - /* MPU dpll */ - configure_mpu_dpll(); + u32 sysclk_ind = get_sys_clk_index(); + return &usb_dpll_params_1920mhz[sysclk_ind]; } -static void setup_non_essential_dplls(void) +const struct dpll_params *get_abe_dpll_params(void) { - u32 sys_clk_khz, abe_ref_clk; - u32 sysclk_ind, sd_div, num, den; - const struct dpll_params *params; - - sysclk_ind = get_sys_clk_index(); - sys_clk_khz = get_sys_clk_freq() / 1000; - - /* IVA */ - clrsetbits_le32(&prcm->cm_bypclk_dpll_iva, - CM_BYPCLK_DPLL_IVA_CLKSEL_MASK, DPLL_IVA_CLKSEL_CORE_X2_DIV_2); - - do_setup_dpll(&prcm->cm_clkmode_dpll_iva, - &iva_dpll_params_1862mhz[sysclk_ind], DPLL_LOCK); - - /* - * USB: - * USB dpll is J-type. Need to set DPLL_SD_DIV for jitter correction - * DPLL_SD_DIV = CEILING ([DPLL_MULT/(DPLL_DIV+1)]* CLKINP / 250) - * - where CLKINP is sys_clk in MHz - * Use CLKINP in KHz and adjust the denominator accordingly so - * that we have enough accuracy and at the same time no overflow - */ - params = &usb_dpll_params_1920mhz[sysclk_ind]; - num = params->m * sys_clk_khz; - den = (params->n + 1) * 250 * 1000; - num += den - 1; - sd_div = num / den; - clrsetbits_le32(&prcm->cm_clksel_dpll_usb, - CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK, - sd_div << CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT); - - /* Now setup the dpll with the regular function */ - do_setup_dpll(&prcm->cm_clkmode_dpll_usb, params, DPLL_LOCK); - -#ifdef CONFIG_SYS_OMAP4_ABE_SYSCK - params = &abe_dpll_params_sysclk_196608khz[sysclk_ind]; - abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK; +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + u32 sysclk_ind = get_sys_clk_index(); + return &abe_dpll_params_sysclk_196608khz[sysclk_ind]; #else - params = &abe_dpll_params_32k_196608khz; - abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK; - /* - * We need to enable some additional options to achieve - * 196.608MHz from 32768 Hz - */ - setbits_le32(&prcm->cm_clkmode_dpll_abe, - CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK| - CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK| - CM_CLKMODE_DPLL_LPMODE_EN_MASK| - CM_CLKMODE_DPLL_REGM4XEN_MASK); - /* Spend 4 REFCLK cycles at each stage */ - clrsetbits_le32(&prcm->cm_clkmode_dpll_abe, - CM_CLKMODE_DPLL_RAMP_RATE_MASK, - 1 << CM_CLKMODE_DPLL_RAMP_RATE_SHIFT); + return &abe_dpll_params_32k_196608khz; #endif - - /* Select the right reference clk */ - clrsetbits_le32(&prcm->cm_abe_pll_ref_clksel, - CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK, - abe_ref_clk << CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT); - /* Lock the dpll */ - do_setup_dpll(&prcm->cm_clkmode_dpll_abe, params, DPLL_LOCK); -} - -static void do_scale_tps62361(u32 reg, u32 volt_mv) -{ - u32 temp, step; - - step = volt_mv - TPS62361_BASE_VOLT_MV; - step /= 10; - - /* - * Select SET1 in TPS62361: - * VSEL1 is grounded on board. So the following selects - * VSEL1 = 0 and VSEL0 = 1 - */ - gpio_direction_output(TPS62361_VSEL0_GPIO, 0); - gpio_set_value(TPS62361_VSEL0_GPIO, 1); - - temp = TPS62361_I2C_SLAVE_ADDR | - (reg << PRM_VC_VAL_BYPASS_REGADDR_SHIFT) | - (step << PRM_VC_VAL_BYPASS_DATA_SHIFT) | - PRM_VC_VAL_BYPASS_VALID_BIT; - debug("do_scale_tps62361: volt - %d step - 0x%x\n", volt_mv, step); - - writel(temp, &prcm->prm_vc_val_bypass); - if (!wait_on_value(PRM_VC_VAL_BYPASS_VALID_BIT, 0, - &prcm->prm_vc_val_bypass, LDELAY)) { - puts("Scaling voltage failed for vdd_mpu from TPS\n"); - } -} - -static void do_scale_vcore(u32 vcore_reg, u32 volt_mv) -{ - u32 temp, offset_code; - u32 step = 12660; /* 12.66 mV represented in uV */ - u32 offset = volt_mv; - - /* convert to uV for better accuracy in the calculations */ - offset *= 1000; - - if (omap_revision() == OMAP4430_ES1_0) - offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV; - else - offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV; - - offset_code = (offset + step - 1) / step; - /* The code starts at 1 not 0 */ - offset_code++; - - debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv, - offset_code); - - temp = SMPS_I2C_SLAVE_ADDR | - (vcore_reg << PRM_VC_VAL_BYPASS_REGADDR_SHIFT) | - (offset_code << PRM_VC_VAL_BYPASS_DATA_SHIFT) | - PRM_VC_VAL_BYPASS_VALID_BIT; - writel(temp, &prcm->prm_vc_val_bypass); - if (!wait_on_value(PRM_VC_VAL_BYPASS_VALID_BIT, 0, - &prcm->prm_vc_val_bypass, LDELAY)) { - printf("Scaling voltage failed for 0x%x\n", vcore_reg); - } } /* @@ -536,32 +271,16 @@ static void do_scale_vcore(u32 vcore_reg, u32 volt_mv) * enabled in bootloader. Voltage initialization in the kernel will set * these to the nominal values after enabling Smart-Reflex */ -static void scale_vcores(void) +void scale_vcores(void) { - u32 volt, sys_clk_khz, cycles_hi, cycles_low, temp, omap4_rev; + u32 volt, omap_rev; - sys_clk_khz = get_sys_clk_freq() / 1000; + setup_sri2c(); - /* - * Setup the dedicated I2C controller for Voltage Control - * I2C clk - high period 40% low period 60% - */ - cycles_hi = sys_clk_khz * 4 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10; - cycles_low = sys_clk_khz * 6 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10; - /* values to be set in register - less by 5 & 7 respectively */ - cycles_hi -= 5; - cycles_low -= 7; - temp = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) | - (cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT); - writel(temp, &prcm->prm_vc_cfg_i2c_clk); - - /* Disable high speed mode and all advanced features */ - writel(0x0, &prcm->prm_vc_cfg_i2c_mode); - - omap4_rev = omap_revision(); + omap_rev = omap_revision(); /* TPS - supplies vdd_mpu on 4460 */ - if (omap4_rev >= OMAP4460_ES1_0) { - volt = 1430; + if (omap_rev >= OMAP4460_ES1_0) { + volt = 1313; do_scale_tps62361(TPS62361_REG_ADDR_SET1, volt); } @@ -576,8 +295,8 @@ static void scale_vcores(void) * * 4460 : supplies vdd_core */ - if (omap4_rev < OMAP4460_ES1_0) { - volt = 1417; + if (omap_rev < OMAP4460_ES1_0) { + volt = 1325; do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt); } else { volt = 1200; @@ -593,55 +312,18 @@ static void scale_vcores(void) * 4430 : supplies vdd_core * 4460 : not connected */ - if (omap4_rev < OMAP4460_ES1_0) { + if (omap_rev < OMAP4460_ES1_0) { volt = 1200; do_scale_vcore(SMPS_REG_ADDR_VCORE3, volt); } } -static inline void enable_clock_domain(u32 *const clkctrl_reg, u32 enable_mode) -{ - clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK, - enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT); - debug("Enable clock domain - %p\n", clkctrl_reg); -} - -static inline void wait_for_clk_enable(u32 *clkctrl_addr) -{ - u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED; - u32 bound = LDELAY; - - while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) || - (idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) { - - clkctrl = readl(clkctrl_addr); - idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >> - MODULE_CLKCTRL_IDLEST_SHIFT; - if (--bound == 0) { - printf("Clock enable failed for 0x%p idlest 0x%x\n", - clkctrl_addr, clkctrl); - return; - } - } -} - -static inline void enable_clock_module(u32 *const clkctrl_addr, u32 enable_mode, - u32 wait_for_enable) -{ - clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK, - enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT); - debug("Enable clock module - %p\n", clkctrl_addr); - if (wait_for_enable) - wait_for_clk_enable(clkctrl_addr); -} - /* * Enable essential clock domains, modules and * do some additional special settings needed */ -static void enable_basic_clocks(void) +void enable_basic_clocks(void) { - u32 i, max = 100, wait_for_enable = 1; u32 *const clk_domains_essential[] = { &prcm->cm_l4per_clkstctrl, &prcm->cm_l3init_clkstctrl, @@ -651,30 +333,23 @@ static void enable_basic_clocks(void) }; u32 *const clk_modules_hw_auto_essential[] = { + &prcm->cm_memif_emif_1_clkctrl, + &prcm->cm_memif_emif_2_clkctrl, + &prcm->cm_l4cfg_l4_cfg_clkctrl, &prcm->cm_wkup_gpio1_clkctrl, &prcm->cm_l4per_gpio2_clkctrl, &prcm->cm_l4per_gpio3_clkctrl, &prcm->cm_l4per_gpio4_clkctrl, &prcm->cm_l4per_gpio5_clkctrl, &prcm->cm_l4per_gpio6_clkctrl, - &prcm->cm_memif_emif_1_clkctrl, - &prcm->cm_memif_emif_2_clkctrl, - &prcm->cm_l3init_hsusbotg_clkctrl, - &prcm->cm_l3init_usbphy_clkctrl, - &prcm->cm_l4cfg_l4_cfg_clkctrl, 0 }; u32 *const clk_modules_explicit_en_essential[] = { - &prcm->cm_l4per_gptimer2_clkctrl, + &prcm->cm_wkup_gptimer1_clkctrl, &prcm->cm_l3init_hsmmc1_clkctrl, &prcm->cm_l3init_hsmmc2_clkctrl, - &prcm->cm_l4per_mcspi1_clkctrl, - &prcm->cm_wkup_gptimer1_clkctrl, - &prcm->cm_l4per_i2c1_clkctrl, - &prcm->cm_l4per_i2c2_clkctrl, - &prcm->cm_l4per_i2c3_clkctrl, - &prcm->cm_l4per_i2c4_clkctrl, + &prcm->cm_l4per_gptimer2_clkctrl, &prcm->cm_wkup_wdtimer2_clkctrl, &prcm->cm_l4per_uart3_clkctrl, 0 @@ -698,40 +373,45 @@ static void enable_basic_clocks(void) setbits_le32(&prcm->cm_l3init_usbphy_clkctrl, USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK); - /* Put the clock domains in SW_WKUP mode */ - for (i = 0; (i < max) && clk_domains_essential[i]; i++) { - enable_clock_domain(clk_domains_essential[i], - CD_CLKCTRL_CLKTRCTRL_SW_WKUP); - } + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); +} - /* Clock modules that need to be put in HW_AUTO */ - for (i = 0; (i < max) && clk_modules_hw_auto_essential[i]; i++) { - enable_clock_module(clk_modules_hw_auto_essential[i], - MODULE_CLKCTRL_MODULEMODE_HW_AUTO, - wait_for_enable); +void enable_basic_uboot_clocks(void) +{ + u32 *const clk_domains_essential[] = { + 0 + }; + + u32 *const clk_modules_hw_auto_essential[] = { + &prcm->cm_l3init_hsusbotg_clkctrl, + &prcm->cm_l3init_usbphy_clkctrl, + 0 }; - /* Clock modules that need to be put in SW_EXPLICIT_EN mode */ - for (i = 0; (i < max) && clk_modules_explicit_en_essential[i]; i++) { - enable_clock_module(clk_modules_explicit_en_essential[i], - MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN, - wait_for_enable); + u32 *const clk_modules_explicit_en_essential[] = { + &prcm->cm_l4per_mcspi1_clkctrl, + &prcm->cm_l4per_i2c1_clkctrl, + &prcm->cm_l4per_i2c2_clkctrl, + &prcm->cm_l4per_i2c3_clkctrl, + &prcm->cm_l4per_i2c4_clkctrl, + 0 }; - /* Put the clock domains in HW_AUTO mode now */ - for (i = 0; (i < max) && clk_domains_essential[i]; i++) { - enable_clock_domain(clk_domains_essential[i], - CD_CLKCTRL_CLKTRCTRL_HW_AUTO); - } + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); } /* * Enable non-essential clock domains, modules and * do some additional special settings needed */ -static void enable_non_essential_clocks(void) +void enable_non_essential_clocks(void) { - u32 i, max = 100, wait_for_enable = 0; u32 *const clk_domains_non_essential[] = { &prcm->cm_mpu_m3_clkstctrl, &prcm->cm_ivahd_clkstctrl, @@ -807,135 +487,13 @@ static void enable_non_essential_clocks(void) /* Enable all optional functional clocks of DSS */ setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); - - /* Put the clock domains in SW_WKUP mode */ - for (i = 0; (i < max) && clk_domains_non_essential[i]; i++) { - enable_clock_domain(clk_domains_non_essential[i], - CD_CLKCTRL_CLKTRCTRL_SW_WKUP); - } - - /* Clock modules that need to be put in HW_AUTO */ - for (i = 0; (i < max) && clk_modules_hw_auto_non_essential[i]; i++) { - enable_clock_module(clk_modules_hw_auto_non_essential[i], - MODULE_CLKCTRL_MODULEMODE_HW_AUTO, - wait_for_enable); - }; - - /* Clock modules that need to be put in SW_EXPLICIT_EN mode */ - for (i = 0; (i < max) && clk_modules_explicit_en_non_essential[i]; - i++) { - enable_clock_module(clk_modules_explicit_en_non_essential[i], - MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN, - wait_for_enable); - }; - - /* Put the clock domains in HW_AUTO mode now */ - for (i = 0; (i < max) && clk_domains_non_essential[i]; i++) { - enable_clock_domain(clk_domains_non_essential[i], - CD_CLKCTRL_CLKTRCTRL_HW_AUTO); - } + do_enable_clocks(clk_domains_non_essential, + clk_modules_hw_auto_non_essential, + clk_modules_explicit_en_non_essential, + 0); /* Put camera module in no sleep mode */ clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK, CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << MODULE_CLKCTRL_MODULEMODE_SHIFT); } - - -void freq_update_core(void) -{ - u32 freq_config1 = 0; - const struct dpll_params *core_dpll_params; - - core_dpll_params = get_core_dpll_params(); - /* Put EMIF clock domain in sw wakeup mode */ - enable_clock_domain(&prcm->cm_memif_clkstctrl, - CD_CLKCTRL_CLKTRCTRL_SW_WKUP); - wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl); - wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl); - - freq_config1 = SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK | - SHADOW_FREQ_CONFIG1_DLL_RESET_MASK; - - freq_config1 |= (DPLL_EN_LOCK << SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT) & - SHADOW_FREQ_CONFIG1_DPLL_EN_MASK; - - freq_config1 |= (core_dpll_params->m2 << - SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT) & - SHADOW_FREQ_CONFIG1_M2_DIV_MASK; - - writel(freq_config1, &prcm->cm_shadow_freq_config1); - if (!wait_on_value(SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK, 0, - &prcm->cm_shadow_freq_config1, LDELAY)) { - puts("FREQ UPDATE procedure failed!!"); - hang(); - } - - /* Put EMIF clock domain back in hw auto mode */ - enable_clock_domain(&prcm->cm_memif_clkstctrl, - CD_CLKCTRL_CLKTRCTRL_HW_AUTO); - wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl); - wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl); -} - -void bypass_dpll(u32 *const base) -{ - do_bypass_dpll(base); - wait_for_bypass(base); -} - -void lock_dpll(u32 *const base) -{ - do_lock_dpll(base); - wait_for_lock(base); -} - -void setup_clocks_for_console(void) -{ - /* Do not add any spl_debug prints in this function */ - clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, - CD_CLKCTRL_CLKTRCTRL_SW_WKUP << - CD_CLKCTRL_CLKTRCTRL_SHIFT); - - /* Enable all UARTs - console will be on one of them */ - clrsetbits_le32(&prcm->cm_l4per_uart1_clkctrl, - MODULE_CLKCTRL_MODULEMODE_MASK, - MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << - MODULE_CLKCTRL_MODULEMODE_SHIFT); - - clrsetbits_le32(&prcm->cm_l4per_uart2_clkctrl, - MODULE_CLKCTRL_MODULEMODE_MASK, - MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << - MODULE_CLKCTRL_MODULEMODE_SHIFT); - - clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl, - MODULE_CLKCTRL_MODULEMODE_MASK, - MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << - MODULE_CLKCTRL_MODULEMODE_SHIFT); - - clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl, - MODULE_CLKCTRL_MODULEMODE_MASK, - MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << - MODULE_CLKCTRL_MODULEMODE_SHIFT); - - clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, - CD_CLKCTRL_CLKTRCTRL_HW_AUTO << - CD_CLKCTRL_CLKTRCTRL_SHIFT); -} - -void prcm_init(void) -{ - switch (omap4_hw_init_context()) { - case OMAP_INIT_CONTEXT_SPL: - case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR: - case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH: - enable_basic_clocks(); - scale_vcores(); - setup_dplls(); - setup_non_essential_dplls(); - enable_non_essential_clocks(); - break; - default: - break; - } -} diff --git a/arch/arm/cpu/armv7/omap4/emif.c b/arch/arm/cpu/armv7/omap4/emif.c index 988b2050f..ca4823dd7 100644 --- a/arch/arm/cpu/armv7/omap4/emif.c +++ b/arch/arm/cpu/armv7/omap4/emif.c @@ -26,645 +26,15 @@ */ #include <common.h> -#include <asm/arch/emif.h> -#include <asm/arch/clocks.h> +#include <asm/emif.h> #include <asm/arch/sys_proto.h> -#include <asm/omap_common.h> #include <asm/utils.h> -static inline u32 emif_num(u32 base) -{ - if (base == OMAP44XX_EMIF1) - return 1; - else if (base == OMAP44XX_EMIF2) - return 2; - else - return 0; -} - -static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr) -{ - u32 mr; - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - - mr_addr |= cs << OMAP44XX_REG_CS_SHIFT; - writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg); - if (omap_revision() == OMAP4430_ES2_0) - mr = readl(&emif->emif_lpddr2_mode_reg_data_es2); - else - mr = readl(&emif->emif_lpddr2_mode_reg_data); - debug("get_mr: EMIF%d cs %d mr %08x val 0x%x\n", emif_num(base), - cs, mr_addr, mr); - return mr; -} - -static inline void set_mr(u32 base, u32 cs, u32 mr_addr, u32 mr_val) -{ - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - - mr_addr |= cs << OMAP44XX_REG_CS_SHIFT; - writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg); - writel(mr_val, &emif->emif_lpddr2_mode_reg_data); -} - -void emif_reset_phy(u32 base) -{ - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - u32 iodft; - - iodft = readl(&emif->emif_iodft_tlgc); - iodft |= OMAP44XX_REG_RESET_PHY_MASK; - writel(iodft, &emif->emif_iodft_tlgc); -} - -static void do_lpddr2_init(u32 base, u32 cs) -{ - u32 mr_addr; - - /* Wait till device auto initialization is complete */ - while (get_mr(base, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK) - ; - set_mr(base, cs, LPDDR2_MR10, MR10_ZQ_ZQINIT); - /* - * tZQINIT = 1 us - * Enough loops assuming a maximum of 2GHz - */ - sdelay(2000); - set_mr(base, cs, LPDDR2_MR1, MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3); - set_mr(base, cs, LPDDR2_MR16, MR16_REF_FULL_ARRAY); - /* - * Enable refresh along with writing MR2 - * Encoding of RL in MR2 is (RL - 2) - */ - mr_addr = LPDDR2_MR2 | OMAP44XX_REG_REFRESH_EN_MASK; - set_mr(base, cs, mr_addr, RL_FINAL - 2); -} - -static void lpddr2_init(u32 base, const struct emif_regs *regs) -{ - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - - /* Not NVM */ - clrbits_le32(&emif->emif_lpddr2_nvm_config, OMAP44XX_REG_CS1NVMEN_MASK); - - /* - * Keep REG_INITREF_DIS = 1 to prevent re-initialization of SDRAM - * when EMIF_SDRAM_CONFIG register is written - */ - setbits_le32(&emif->emif_sdram_ref_ctrl, OMAP44XX_REG_INITREF_DIS_MASK); - - /* - * Set the SDRAM_CONFIG and PHY_CTRL for the - * un-locked frequency & default RL - */ - writel(regs->sdram_config_init, &emif->emif_sdram_config); - writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1); - - do_lpddr2_init(base, CS0); - if (regs->sdram_config & OMAP44XX_REG_EBANK_MASK) - do_lpddr2_init(base, CS1); - - writel(regs->sdram_config, &emif->emif_sdram_config); - writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1); - - /* Enable refresh now */ - clrbits_le32(&emif->emif_sdram_ref_ctrl, OMAP44XX_REG_INITREF_DIS_MASK); - -} - -static void emif_update_timings(u32 base, const struct emif_regs *regs) -{ - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - - writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl_shdw); - writel(regs->sdram_tim1, &emif->emif_sdram_tim_1_shdw); - writel(regs->sdram_tim2, &emif->emif_sdram_tim_2_shdw); - writel(regs->sdram_tim3, &emif->emif_sdram_tim_3_shdw); - if (omap_revision() == OMAP4430_ES1_0) { - /* ES1 bug EMIF should be in force idle during freq_update */ - writel(0, &emif->emif_pwr_mgmt_ctrl); - } else { - writel(EMIF_PWR_MGMT_CTRL, &emif->emif_pwr_mgmt_ctrl); - writel(EMIF_PWR_MGMT_CTRL_SHDW, &emif->emif_pwr_mgmt_ctrl_shdw); - } - writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl_shdw); - writel(regs->zq_config, &emif->emif_zq_config); - writel(regs->temp_alert_config, &emif->emif_temp_alert_config); - writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); - - if (omap_revision() >= OMAP4460_ES1_0) { - writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0, - &emif->emif_l3_config); - } else { - writel(EMIF_L3_CONFIG_VAL_SYS_10_LL_0, - &emif->emif_l3_config); - } -} - #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg)) - -static u32 *const T_num = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_NUM; -static u32 *const T_den = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_DEN; -static u32 *const emif_sizes = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_SIZE; - -/* - * Organization and refresh requirements for LPDDR2 devices of different - * types and densities. Derived from JESD209-2 section 2.4 - */ -const struct lpddr2_addressing addressing_table[] = { - /* Banks tREFIx10 rowx32,rowx16 colx32,colx16 density */ - {BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_7, COL_8} },/*64M */ - {BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_8, COL_9} },/*128M */ - {BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_8, COL_9} },/*256M */ - {BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*512M */ - {BANKS8, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*1GS4 */ - {BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_9, COL_10} },/*2GS4 */ - {BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_10, COL_11} },/*4G */ - {BANKS8, T_REFI_3_9, {ROW_15, ROW_15}, {COL_10, COL_11} },/*8G */ - {BANKS4, T_REFI_7_8, {ROW_14, ROW_14}, {COL_9, COL_10} },/*1GS2 */ - {BANKS4, T_REFI_3_9, {ROW_15, ROW_15}, {COL_9, COL_10} },/*2GS2 */ -}; - -static const u32 lpddr2_density_2_size_in_mbytes[] = { - 8, /* 64Mb */ - 16, /* 128Mb */ - 32, /* 256Mb */ - 64, /* 512Mb */ - 128, /* 1Gb */ - 256, /* 2Gb */ - 512, /* 4Gb */ - 1024, /* 8Gb */ - 2048, /* 16Gb */ - 4096 /* 32Gb */ -}; - -/* - * Calculate the period of DDR clock from frequency value and set the - * denominator and numerator in global variables for easy access later - */ -static void set_ddr_clk_period(u32 freq) -{ - /* - * period = 1/freq - * period_in_ns = 10^9/freq - */ - *T_num = 1000000000; - *T_den = freq; - cancel_out(T_num, T_den, 200); - -} - -/* - * Convert time in nano seconds to number of cycles of DDR clock - */ -static inline u32 ns_2_cycles(u32 ns) -{ - return ((ns * (*T_den)) + (*T_num) - 1) / (*T_num); -} - -/* - * ns_2_cycles with the difference that the time passed is 2 times the actual - * value(to avoid fractions). The cycles returned is for the original value of - * the timing parameter - */ -static inline u32 ns_x2_2_cycles(u32 ns) -{ - return ((ns * (*T_den)) + (*T_num) * 2 - 1) / ((*T_num) * 2); -} - -/* - * Find addressing table index based on the device's type(S2 or S4) and - * density - */ -s8 addressing_table_index(u8 type, u8 density, u8 width) -{ - u8 index; - if ((density > LPDDR2_DENSITY_8Gb) || (width == LPDDR2_IO_WIDTH_8)) - return -1; - - /* - * Look at the way ADDR_TABLE_INDEX* values have been defined - * in emif.h compared to LPDDR2_DENSITY_* values - * The table is layed out in the increasing order of density - * (ignoring type). The exceptions 1GS2 and 2GS2 have been placed - * at the end - */ - if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_1Gb)) - index = ADDR_TABLE_INDEX1GS2; - else if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_2Gb)) - index = ADDR_TABLE_INDEX2GS2; - else - index = density; - - debug("emif: addressing table index %d\n", index); - - return index; -} - -/* - * Find the the right timing table from the array of timing - * tables of the device using DDR clock frequency - */ -static const struct lpddr2_ac_timings *get_timings_table(const struct - lpddr2_ac_timings const *const *device_timings, - u32 freq) -{ - u32 i, temp, freq_nearest; - const struct lpddr2_ac_timings *timings = 0; - - emif_assert(freq <= MAX_LPDDR2_FREQ); - emif_assert(device_timings); - - /* - * Start with the maximum allowed frequency - that is always safe - */ - freq_nearest = MAX_LPDDR2_FREQ; - /* - * Find the timings table that has the max frequency value: - * i. Above or equal to the DDR frequency - safe - * ii. The lowest that satisfies condition (i) - optimal - */ - for (i = 0; (i < MAX_NUM_SPEEDBINS) && device_timings[i]; i++) { - temp = device_timings[i]->max_freq; - if ((temp >= freq) && (temp <= freq_nearest)) { - freq_nearest = temp; - timings = device_timings[i]; - } - } - debug("emif: timings table: %d\n", freq_nearest); - return timings; -} - -/* - * Finds the value of emif_sdram_config_reg - * All parameters are programmed based on the device on CS0. - * If there is a device on CS1, it will be same as that on CS0 or - * it will be NVM. We don't support NVM yet. - * If cs1_device pointer is NULL it is assumed that there is no device - * on CS1 - */ -static u32 get_sdram_config_reg(const struct lpddr2_device_details *cs0_device, - const struct lpddr2_device_details *cs1_device, - const struct lpddr2_addressing *addressing, - u8 RL) -{ - u32 config_reg = 0; - - config_reg |= (cs0_device->type + 4) << OMAP44XX_REG_SDRAM_TYPE_SHIFT; - config_reg |= EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING << - OMAP44XX_REG_IBANK_POS_SHIFT; - - config_reg |= cs0_device->io_width << OMAP44XX_REG_NARROW_MODE_SHIFT; - - config_reg |= RL << OMAP44XX_REG_CL_SHIFT; - - config_reg |= addressing->row_sz[cs0_device->io_width] << - OMAP44XX_REG_ROWSIZE_SHIFT; - - config_reg |= addressing->num_banks << OMAP44XX_REG_IBANK_SHIFT; - - config_reg |= (cs1_device ? EBANK_CS1_EN : EBANK_CS1_DIS) << - OMAP44XX_REG_EBANK_SHIFT; - - config_reg |= addressing->col_sz[cs0_device->io_width] << - OMAP44XX_REG_PAGESIZE_SHIFT; - - return config_reg; -} - -static u32 get_sdram_ref_ctrl(u32 freq, - const struct lpddr2_addressing *addressing) -{ - u32 ref_ctrl = 0, val = 0, freq_khz; - freq_khz = freq / 1000; - /* - * refresh rate to be set is 'tREFI * freq in MHz - * division by 10000 to account for khz and x10 in t_REFI_us_x10 - */ - val = addressing->t_REFI_us_x10 * freq_khz / 10000; - ref_ctrl |= val << OMAP44XX_REG_REFRESH_RATE_SHIFT; - - return ref_ctrl; -} - -static u32 get_sdram_tim_1_reg(const struct lpddr2_ac_timings *timings, - const struct lpddr2_min_tck *min_tck, - const struct lpddr2_addressing *addressing) -{ - u32 tim1 = 0, val = 0; - val = max(min_tck->tWTR, ns_x2_2_cycles(timings->tWTRx2)) - 1; - tim1 |= val << OMAP44XX_REG_T_WTR_SHIFT; - - if (addressing->num_banks == BANKS8) - val = (timings->tFAW * (*T_den) + 4 * (*T_num) - 1) / - (4 * (*T_num)) - 1; - else - val = max(min_tck->tRRD, ns_2_cycles(timings->tRRD)) - 1; - - tim1 |= val << OMAP44XX_REG_T_RRD_SHIFT; - - val = ns_2_cycles(timings->tRASmin + timings->tRPab) - 1; - tim1 |= val << OMAP44XX_REG_T_RC_SHIFT; - - val = max(min_tck->tRAS_MIN, ns_2_cycles(timings->tRASmin)) - 1; - tim1 |= val << OMAP44XX_REG_T_RAS_SHIFT; - - val = max(min_tck->tWR, ns_2_cycles(timings->tWR)) - 1; - tim1 |= val << OMAP44XX_REG_T_WR_SHIFT; - - val = max(min_tck->tRCD, ns_2_cycles(timings->tRCD)) - 1; - tim1 |= val << OMAP44XX_REG_T_RCD_SHIFT; - - val = max(min_tck->tRP_AB, ns_2_cycles(timings->tRPab)) - 1; - tim1 |= val << OMAP44XX_REG_T_RP_SHIFT; - - return tim1; -} - -static u32 get_sdram_tim_2_reg(const struct lpddr2_ac_timings *timings, - const struct lpddr2_min_tck *min_tck) -{ - u32 tim2 = 0, val = 0; - val = max(min_tck->tCKE, timings->tCKE) - 1; - tim2 |= val << OMAP44XX_REG_T_CKE_SHIFT; - - val = max(min_tck->tRTP, ns_x2_2_cycles(timings->tRTPx2)) - 1; - tim2 |= val << OMAP44XX_REG_T_RTP_SHIFT; - - /* - * tXSRD = tRFCab + 10 ns. XSRD and XSNR should have the - * same value - */ - val = ns_2_cycles(timings->tXSR) - 1; - tim2 |= val << OMAP44XX_REG_T_XSRD_SHIFT; - tim2 |= val << OMAP44XX_REG_T_XSNR_SHIFT; - - val = max(min_tck->tXP, ns_x2_2_cycles(timings->tXPx2)) - 1; - tim2 |= val << OMAP44XX_REG_T_XP_SHIFT; - - return tim2; -} - -static u32 get_sdram_tim_3_reg(const struct lpddr2_ac_timings *timings, - const struct lpddr2_min_tck *min_tck, - const struct lpddr2_addressing *addressing) -{ - u32 tim3 = 0, val = 0; - val = min(timings->tRASmax * 10 / addressing->t_REFI_us_x10 - 1, 0xF); - tim3 |= val << OMAP44XX_REG_T_RAS_MAX_SHIFT; - - val = ns_2_cycles(timings->tRFCab) - 1; - tim3 |= val << OMAP44XX_REG_T_RFC_SHIFT; - - val = ns_x2_2_cycles(timings->tDQSCKMAXx2) - 1; - tim3 |= val << OMAP44XX_REG_T_TDQSCKMAX_SHIFT; - - val = ns_2_cycles(timings->tZQCS) - 1; - tim3 |= val << OMAP44XX_REG_ZQ_ZQCS_SHIFT; - - val = max(min_tck->tCKESR, ns_2_cycles(timings->tCKESR)) - 1; - tim3 |= val << OMAP44XX_REG_T_CKESR_SHIFT; - - return tim3; -} - -static u32 get_zq_config_reg(const struct lpddr2_device_details *cs1_device, - const struct lpddr2_addressing *addressing, - u8 volt_ramp) -{ - u32 zq = 0, val = 0; - if (volt_ramp) - val = - EMIF_ZQCS_INTERVAL_DVFS_IN_US * 10 / - addressing->t_REFI_us_x10; - else - val = - EMIF_ZQCS_INTERVAL_NORMAL_IN_US * 10 / - addressing->t_REFI_us_x10; - zq |= val << OMAP44XX_REG_ZQ_REFINTERVAL_SHIFT; - - zq |= (REG_ZQ_ZQCL_MULT - 1) << OMAP44XX_REG_ZQ_ZQCL_MULT_SHIFT; - - zq |= (REG_ZQ_ZQINIT_MULT - 1) << OMAP44XX_REG_ZQ_ZQINIT_MULT_SHIFT; - - zq |= REG_ZQ_SFEXITEN_ENABLE << OMAP44XX_REG_ZQ_SFEXITEN_SHIFT; - - /* - * Assuming that two chipselects have a single calibration resistor - * If there are indeed two calibration resistors, then this flag should - * be enabled to take advantage of dual calibration feature. - * This data should ideally come from board files. But considering - * that none of the boards today have calibration resistors per CS, - * it would be an unnecessary overhead. - */ - zq |= REG_ZQ_DUALCALEN_DISABLE << OMAP44XX_REG_ZQ_DUALCALEN_SHIFT; - - zq |= REG_ZQ_CS0EN_ENABLE << OMAP44XX_REG_ZQ_CS0EN_SHIFT; - - zq |= (cs1_device ? 1 : 0) << OMAP44XX_REG_ZQ_CS1EN_SHIFT; - - return zq; -} - -static u32 get_temp_alert_config(const struct lpddr2_device_details *cs1_device, - const struct lpddr2_addressing *addressing, - u8 is_derated) -{ - u32 alert = 0, interval; - interval = - TEMP_ALERT_POLL_INTERVAL_MS * 10000 / addressing->t_REFI_us_x10; - if (is_derated) - interval *= 4; - alert |= interval << OMAP44XX_REG_TA_REFINTERVAL_SHIFT; - - alert |= TEMP_ALERT_CONFIG_DEVCT_1 << OMAP44XX_REG_TA_DEVCNT_SHIFT; - - alert |= TEMP_ALERT_CONFIG_DEVWDT_32 << OMAP44XX_REG_TA_DEVWDT_SHIFT; - - alert |= 1 << OMAP44XX_REG_TA_SFEXITEN_SHIFT; - - alert |= 1 << OMAP44XX_REG_TA_CS0EN_SHIFT; - - alert |= (cs1_device ? 1 : 0) << OMAP44XX_REG_TA_CS1EN_SHIFT; - - return alert; -} - -static u32 get_read_idle_ctrl_reg(u8 volt_ramp) -{ - u32 idle = 0, val = 0; - if (volt_ramp) - val = ns_2_cycles(READ_IDLE_INTERVAL_DVFS) / 64 - 1; - else - /*Maximum value in normal conditions - suggested by hw team */ - val = 0x1FF; - idle |= val << OMAP44XX_REG_READ_IDLE_INTERVAL_SHIFT; - - idle |= EMIF_REG_READ_IDLE_LEN_VAL << OMAP44XX_REG_READ_IDLE_LEN_SHIFT; - - return idle; -} - -static u32 get_ddr_phy_ctrl_1(u32 freq, u8 RL) -{ - u32 phy = 0, val = 0; - - phy |= (RL + 2) << OMAP44XX_REG_READ_LATENCY_SHIFT; - - if (freq <= 100000000) - val = EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS; - else if (freq <= 200000000) - val = EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ; - else - val = EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ; - phy |= val << OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHIFT; - - /* Other fields are constant magic values. Hardcode them together */ - phy |= EMIF_DDR_PHY_CTRL_1_BASE_VAL << - OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT; - - return phy; -} - -static u32 get_emif_mem_size(struct emif_device_details *devices) -{ - u32 size_mbytes = 0, temp; - - if (!devices) - return 0; - - if (devices->cs0_device_details) { - temp = devices->cs0_device_details->density; - size_mbytes += lpddr2_density_2_size_in_mbytes[temp]; - } - - if (devices->cs1_device_details) { - temp = devices->cs1_device_details->density; - size_mbytes += lpddr2_density_2_size_in_mbytes[temp]; - } - /* convert to bytes */ - return size_mbytes << 20; -} - -/* Gets the encoding corresponding to a given DMM section size */ -u32 get_dmm_section_size_map(u32 section_size) -{ - /* - * Section size mapping: - * 0x0: 16-MiB section - * 0x1: 32-MiB section - * 0x2: 64-MiB section - * 0x3: 128-MiB section - * 0x4: 256-MiB section - * 0x5: 512-MiB section - * 0x6: 1-GiB section - * 0x7: 2-GiB section - */ - section_size >>= 24; /* divide by 16 MB */ - return log_2_n_round_down(section_size); -} - -static void emif_calculate_regs( - const struct emif_device_details *emif_dev_details, - u32 freq, struct emif_regs *regs) -{ - u32 temp, sys_freq; - const struct lpddr2_addressing *addressing; - const struct lpddr2_ac_timings *timings; - const struct lpddr2_min_tck *min_tck; - const struct lpddr2_device_details *cs0_dev_details = - emif_dev_details->cs0_device_details; - const struct lpddr2_device_details *cs1_dev_details = - emif_dev_details->cs1_device_details; - const struct lpddr2_device_timings *cs0_dev_timings = - emif_dev_details->cs0_device_timings; - - emif_assert(emif_dev_details); - emif_assert(regs); - /* - * You can not have a device on CS1 without one on CS0 - * So configuring EMIF without a device on CS0 doesn't - * make sense - */ - emif_assert(cs0_dev_details); - emif_assert(cs0_dev_details->type != LPDDR2_TYPE_NVM); - /* - * If there is a device on CS1 it should be same type as CS0 - * (or NVM. But NVM is not supported in this driver yet) - */ - emif_assert((cs1_dev_details == NULL) || - (cs1_dev_details->type == LPDDR2_TYPE_NVM) || - (cs0_dev_details->type == cs1_dev_details->type)); - emif_assert(freq <= MAX_LPDDR2_FREQ); - - set_ddr_clk_period(freq); - - /* - * The device on CS0 is used for all timing calculations - * There is only one set of registers for timings per EMIF. So, if the - * second CS(CS1) has a device, it should have the same timings as the - * device on CS0 - */ - timings = get_timings_table(cs0_dev_timings->ac_timings, freq); - emif_assert(timings); - min_tck = cs0_dev_timings->min_tck; - - temp = addressing_table_index(cs0_dev_details->type, - cs0_dev_details->density, - cs0_dev_details->io_width); - - emif_assert((temp >= 0)); - addressing = &(addressing_table[temp]); - emif_assert(addressing); - - sys_freq = get_sys_clk_freq(); - - regs->sdram_config_init = get_sdram_config_reg(cs0_dev_details, - cs1_dev_details, - addressing, RL_BOOT); - - regs->sdram_config = get_sdram_config_reg(cs0_dev_details, - cs1_dev_details, - addressing, RL_FINAL); - - regs->ref_ctrl = get_sdram_ref_ctrl(freq, addressing); - - regs->sdram_tim1 = get_sdram_tim_1_reg(timings, min_tck, addressing); - - regs->sdram_tim2 = get_sdram_tim_2_reg(timings, min_tck); - - regs->sdram_tim3 = get_sdram_tim_3_reg(timings, min_tck, addressing); - - regs->read_idle_ctrl = get_read_idle_ctrl_reg(LPDDR2_VOLTAGE_STABLE); - - regs->temp_alert_config = - get_temp_alert_config(cs1_dev_details, addressing, 0); - - regs->zq_config = get_zq_config_reg(cs1_dev_details, addressing, - LPDDR2_VOLTAGE_STABLE); - - regs->emif_ddr_phy_ctlr_1_init = - get_ddr_phy_ctrl_1(sys_freq / 2, RL_BOOT); - - regs->emif_ddr_phy_ctlr_1 = - get_ddr_phy_ctrl_1(freq, RL_FINAL); - - regs->freq = freq; - - print_timing_reg(regs->sdram_config_init); - print_timing_reg(regs->sdram_config); - print_timing_reg(regs->ref_ctrl); - print_timing_reg(regs->sdram_tim1); - print_timing_reg(regs->sdram_tim2); - print_timing_reg(regs->sdram_tim3); - print_timing_reg(regs->read_idle_ctrl); - print_timing_reg(regs->temp_alert_config); - print_timing_reg(regs->zq_config); - print_timing_reg(regs->emif_ddr_phy_ctlr_1); - print_timing_reg(regs->emif_ddr_phy_ctlr_1_init); -} -#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ +u32 *const T_num = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_NUM; +u32 *const T_den = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_DEN; +u32 *const emif_sizes = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_SIZE; +#endif #ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS /* Base AC Timing values specified by JESD209-2 for 400MHz operation */ @@ -691,30 +61,6 @@ static const struct lpddr2_ac_timings timings_jedec_400_mhz = { .tFAW = 50 }; -/* Base AC Timing values specified by JESD209-2 for 333 MHz operation */ -static const struct lpddr2_ac_timings timings_jedec_333_mhz = { - .max_freq = 333000000, - .RL = 5, - .tRPab = 21, - .tRCD = 18, - .tWR = 15, - .tRASmin = 42, - .tRRD = 10, - .tWTRx2 = 15, - .tXSR = 140, - .tXPx2 = 15, - .tRFCab = 130, - .tRTPx2 = 15, - .tCKE = 3, - .tCKESR = 15, - .tZQCS = 90, - .tZQCL = 360, - .tZQINIT = 1000, - .tDQSCKMAXx2 = 11, - .tRASmax = 70, - .tFAW = 50 -}; - /* Base AC Timing values specified by JESD209-2 for 200 MHz operation */ static const struct lpddr2_ac_timings timings_jedec_200_mhz = { .max_freq = 200000000, @@ -764,7 +110,6 @@ static const struct lpddr2_min_tck min_tck_jedec = { static const struct lpddr2_ac_timings const* jedec_ac_timings[MAX_NUM_SPEEDBINS] = { &timings_jedec_200_mhz, - &timings_jedec_333_mhz, &timings_jedec_400_mhz }; @@ -782,473 +127,3 @@ void emif_get_device_timings(u32 emif_nr, *cs1_device_timings = &jedec_default_timings; } #endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */ - -#ifdef CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION -const char *get_lpddr2_type(u8 type_id) -{ - switch (type_id) { - case LPDDR2_TYPE_S4: - return "LPDDR2-S4"; - case LPDDR2_TYPE_S2: - return "LPDDR2-S2"; - default: - return NULL; - } -} - -const char *get_lpddr2_io_width(u8 width_id) -{ - switch (width_id) { - case LPDDR2_IO_WIDTH_8: - return "x8"; - case LPDDR2_IO_WIDTH_16: - return "x16"; - case LPDDR2_IO_WIDTH_32: - return "x32"; - default: - return NULL; - } -} - -const char *get_lpddr2_manufacturer(u32 manufacturer) -{ - switch (manufacturer) { - case LPDDR2_MANUFACTURER_SAMSUNG: - return "Samsung"; - case LPDDR2_MANUFACTURER_QIMONDA: - return "Qimonda"; - case LPDDR2_MANUFACTURER_ELPIDA: - return "Elpida"; - case LPDDR2_MANUFACTURER_ETRON: - return "Etron"; - case LPDDR2_MANUFACTURER_NANYA: - return "Nanya"; - case LPDDR2_MANUFACTURER_HYNIX: - return "Hynix"; - case LPDDR2_MANUFACTURER_MOSEL: - return "Mosel"; - case LPDDR2_MANUFACTURER_WINBOND: - return "Winbond"; - case LPDDR2_MANUFACTURER_ESMT: - return "ESMT"; - case LPDDR2_MANUFACTURER_SPANSION: - return "Spansion"; - case LPDDR2_MANUFACTURER_SST: - return "SST"; - case LPDDR2_MANUFACTURER_ZMOS: - return "ZMOS"; - case LPDDR2_MANUFACTURER_INTEL: - return "Intel"; - case LPDDR2_MANUFACTURER_NUMONYX: - return "Numonyx"; - case LPDDR2_MANUFACTURER_MICRON: - return "Micron"; - default: - return NULL; - } -} - -static void display_sdram_details(u32 emif_nr, u32 cs, - struct lpddr2_device_details *device) -{ - const char *mfg_str; - const char *type_str; - char density_str[10]; - u32 density; - - debug("EMIF%d CS%d\t", emif_nr, cs); - - if (!device) { - debug("None\n"); - return; - } - - mfg_str = get_lpddr2_manufacturer(device->manufacturer); - type_str = get_lpddr2_type(device->type); - - density = lpddr2_density_2_size_in_mbytes[device->density]; - if ((density / 1024 * 1024) == density) { - density /= 1024; - sprintf(density_str, "%d GB", density); - } else - sprintf(density_str, "%d MB", density); - if (mfg_str && type_str) - debug("%s\t\t%s\t%s\n", mfg_str, type_str, density_str); -} - -static u8 is_lpddr2_sdram_present(u32 base, u32 cs, - struct lpddr2_device_details *lpddr2_device) -{ - u32 mr = 0, temp; - - mr = get_mr(base, cs, LPDDR2_MR0); - if (mr > 0xFF) { - /* Mode register value bigger than 8 bit */ - return 0; - } - - temp = (mr & LPDDR2_MR0_DI_MASK) >> LPDDR2_MR0_DI_SHIFT; - if (temp) { - /* Not SDRAM */ - return 0; - } - temp = (mr & LPDDR2_MR0_DNVI_MASK) >> LPDDR2_MR0_DNVI_SHIFT; - - if (temp) { - /* DNV supported - But DNV is only supported for NVM */ - return 0; - } - - mr = get_mr(base, cs, LPDDR2_MR4); - if (mr > 0xFF) { - /* Mode register value bigger than 8 bit */ - return 0; - } - - mr = get_mr(base, cs, LPDDR2_MR5); - if (mr >= 0xFF) { - /* Mode register value bigger than 8 bit */ - return 0; - } - - if (!get_lpddr2_manufacturer(mr)) { - /* Manufacturer not identified */ - return 0; - } - lpddr2_device->manufacturer = mr; - - mr = get_mr(base, cs, LPDDR2_MR6); - if (mr >= 0xFF) { - /* Mode register value bigger than 8 bit */ - return 0; - } - - mr = get_mr(base, cs, LPDDR2_MR7); - if (mr >= 0xFF) { - /* Mode register value bigger than 8 bit */ - return 0; - } - - mr = get_mr(base, cs, LPDDR2_MR8); - if (mr >= 0xFF) { - /* Mode register value bigger than 8 bit */ - return 0; - } - - temp = (mr & MR8_TYPE_MASK) >> MR8_TYPE_SHIFT; - if (!get_lpddr2_type(temp)) { - /* Not SDRAM */ - return 0; - } - lpddr2_device->type = temp; - - temp = (mr & MR8_DENSITY_MASK) >> MR8_DENSITY_SHIFT; - if (temp > LPDDR2_DENSITY_32Gb) { - /* Density not supported */ - return 0; - } - lpddr2_device->density = temp; - - temp = (mr & MR8_IO_WIDTH_MASK) >> MR8_IO_WIDTH_SHIFT; - if (!get_lpddr2_io_width(temp)) { - /* IO width unsupported value */ - return 0; - } - lpddr2_device->io_width = temp; - - /* - * If all the above tests pass we should - * have a device on this chip-select - */ - return 1; -} - -struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs, - struct lpddr2_device_details *lpddr2_dev_details) -{ - u32 phy; - u32 base = (emif_nr == 1) ? OMAP44XX_EMIF1 : OMAP44XX_EMIF2; - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - - if (!lpddr2_dev_details) - return NULL; - - /* Do the minimum init for mode register accesses */ - if (!running_from_sdram()) { - phy = get_ddr_phy_ctrl_1(get_sys_clk_freq() / 2, RL_BOOT); - writel(phy, &emif->emif_ddr_phy_ctrl_1); - } - - if (!(is_lpddr2_sdram_present(base, cs, lpddr2_dev_details))) - return NULL; - - display_sdram_details(emif_num(base), cs, lpddr2_dev_details); - - return lpddr2_dev_details; -} -#endif /* CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION */ - -static void do_sdram_init(u32 base) -{ - const struct emif_regs *regs; - u32 in_sdram, emif_nr; - - debug(">>do_sdram_init() %x\n", base); - - in_sdram = running_from_sdram(); - emif_nr = (base == OMAP44XX_EMIF1) ? 1 : 2; - -#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS - emif_get_reg_dump(emif_nr, ®s); - if (!regs) { - debug("EMIF: reg dump not provided\n"); - return; - } -#else - /* - * The user has not provided the register values. We need to - * calculate it based on the timings and the DDR frequency - */ - struct emif_device_details dev_details; - struct emif_regs calculated_regs; - - /* - * Get device details: - * - Discovered if CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION is set - * - Obtained from user otherwise - */ - struct lpddr2_device_details cs0_dev_details, cs1_dev_details; - emif_reset_phy(base); - dev_details.cs0_device_details = emif_get_device_details(base, CS0, - &cs0_dev_details); - dev_details.cs1_device_details = emif_get_device_details(base, CS1, - &cs1_dev_details); - emif_reset_phy(base); - - /* Return if no devices on this EMIF */ - if (!dev_details.cs0_device_details && - !dev_details.cs1_device_details) { - emif_sizes[emif_nr - 1] = 0; - return; - } - - if (!in_sdram) - emif_sizes[emif_nr - 1] = get_emif_mem_size(&dev_details); - - /* - * Get device timings: - * - Default timings specified by JESD209-2 if - * CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS is set - * - Obtained from user otherwise - */ - emif_get_device_timings(emif_nr, &dev_details.cs0_device_timings, - &dev_details.cs1_device_timings); - - /* Calculate the register values */ - emif_calculate_regs(&dev_details, omap4_ddr_clk(), &calculated_regs); - regs = &calculated_regs; -#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ - - /* - * Initializing the LPDDR2 device can not happen from SDRAM. - * Changing the timing registers in EMIF can happen(going from one - * OPP to another) - */ - if (!in_sdram) - lpddr2_init(base, regs); - - /* Write to the shadow registers */ - emif_update_timings(base, regs); - - debug("<<do_sdram_init() %x\n", base); -} - -static void emif_post_init_config(u32 base) -{ - struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - u32 omap4_rev = omap_revision(); - - /* reset phy on ES2.0 */ - if (omap4_rev == OMAP4430_ES2_0) - emif_reset_phy(base); - - /* Put EMIF back in smart idle on ES1.0 */ - if (omap4_rev == OMAP4430_ES1_0) - writel(0x80000000, &emif->emif_pwr_mgmt_ctrl); -} - -static void dmm_init(u32 base) -{ - const struct dmm_lisa_map_regs *lisa_map_regs; - -#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS - emif_get_dmm_regs(&lisa_map_regs); -#else - u32 emif1_size, emif2_size, mapped_size, section_map = 0; - u32 section_cnt, sys_addr; - struct dmm_lisa_map_regs lis_map_regs_calculated = {0}; - - mapped_size = 0; - section_cnt = 3; - sys_addr = CONFIG_SYS_SDRAM_BASE; - emif1_size = emif_sizes[0]; - emif2_size = emif_sizes[1]; - debug("emif1_size 0x%x emif2_size 0x%x\n", emif1_size, emif2_size); - - if (!emif1_size && !emif2_size) - return; - - /* symmetric interleaved section */ - if (emif1_size && emif2_size) { - mapped_size = min(emif1_size, emif2_size); - section_map = DMM_LISA_MAP_INTERLEAVED_BASE_VAL; - section_map |= 0 << OMAP44XX_SDRC_ADDR_SHIFT; - /* only MSB */ - section_map |= (sys_addr >> 24) << - OMAP44XX_SYS_ADDR_SHIFT; - section_map |= get_dmm_section_size_map(mapped_size * 2) - << OMAP44XX_SYS_SIZE_SHIFT; - lis_map_regs_calculated.dmm_lisa_map_3 = section_map; - emif1_size -= mapped_size; - emif2_size -= mapped_size; - sys_addr += (mapped_size * 2); - section_cnt--; - } - - /* - * Single EMIF section(we can have a maximum of 1 single EMIF - * section- either EMIF1 or EMIF2 or none, but not both) - */ - if (emif1_size) { - section_map = DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL; - section_map |= get_dmm_section_size_map(emif1_size) - << OMAP44XX_SYS_SIZE_SHIFT; - /* only MSB */ - section_map |= (mapped_size >> 24) << - OMAP44XX_SDRC_ADDR_SHIFT; - /* only MSB */ - section_map |= (sys_addr >> 24) << OMAP44XX_SYS_ADDR_SHIFT; - section_cnt--; - } - if (emif2_size) { - section_map = DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL; - section_map |= get_dmm_section_size_map(emif2_size) << - OMAP44XX_SYS_SIZE_SHIFT; - /* only MSB */ - section_map |= mapped_size >> 24 << OMAP44XX_SDRC_ADDR_SHIFT; - /* only MSB */ - section_map |= sys_addr >> 24 << OMAP44XX_SYS_ADDR_SHIFT; - section_cnt--; - } - - if (section_cnt == 2) { - /* Only 1 section - either symmetric or single EMIF */ - lis_map_regs_calculated.dmm_lisa_map_3 = section_map; - lis_map_regs_calculated.dmm_lisa_map_2 = 0; - lis_map_regs_calculated.dmm_lisa_map_1 = 0; - } else { - /* 2 sections - 1 symmetric, 1 single EMIF */ - lis_map_regs_calculated.dmm_lisa_map_2 = section_map; - lis_map_regs_calculated.dmm_lisa_map_1 = 0; - } - - /* TRAP for invalid TILER mappings in section 0 */ - lis_map_regs_calculated.dmm_lisa_map_0 = DMM_LISA_MAP_0_INVAL_ADDR_TRAP; - - lisa_map_regs = &lis_map_regs_calculated; -#endif - struct dmm_lisa_map_regs *hw_lisa_map_regs = - (struct dmm_lisa_map_regs *)base; - - writel(0, &hw_lisa_map_regs->dmm_lisa_map_3); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_2); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_1); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_0); - - writel(lisa_map_regs->dmm_lisa_map_3, - &hw_lisa_map_regs->dmm_lisa_map_3); - writel(lisa_map_regs->dmm_lisa_map_2, - &hw_lisa_map_regs->dmm_lisa_map_2); - writel(lisa_map_regs->dmm_lisa_map_1, - &hw_lisa_map_regs->dmm_lisa_map_1); - writel(lisa_map_regs->dmm_lisa_map_0, - &hw_lisa_map_regs->dmm_lisa_map_0); - - if (omap_revision() >= OMAP4460_ES1_0) { - hw_lisa_map_regs = - (struct dmm_lisa_map_regs *)OMAP44XX_MA_LISA_MAP_BASE; - - writel(lisa_map_regs->dmm_lisa_map_3, - &hw_lisa_map_regs->dmm_lisa_map_3); - writel(lisa_map_regs->dmm_lisa_map_2, - &hw_lisa_map_regs->dmm_lisa_map_2); - writel(lisa_map_regs->dmm_lisa_map_1, - &hw_lisa_map_regs->dmm_lisa_map_1); - writel(lisa_map_regs->dmm_lisa_map_0, - &hw_lisa_map_regs->dmm_lisa_map_0); - } -} - -/* - * SDRAM initialization: - * SDRAM initialization has two parts: - * 1. Configuring the SDRAM device - * 2. Update the AC timings related parameters in the EMIF module - * (1) should be done only once and should not be done while we are - * running from SDRAM. - * (2) can and should be done more than once if OPP changes. - * Particularly, this may be needed when we boot without SPL and - * and using Configuration Header(CH). ROM code supports only at 50% OPP - * at boot (low power boot). So u-boot has to switch to OPP100 and update - * the frequency. So, - * Doing (1) and (2) makes sense - first time initialization - * Doing (2) and not (1) makes sense - OPP change (when using CH) - * Doing (1) and not (2) doen't make sense - * See do_sdram_init() for the details - */ -void sdram_init(void) -{ - u32 in_sdram, size_prog, size_detect; - - debug(">>sdram_init()\n"); - - if (omap4_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL) - return; - - in_sdram = running_from_sdram(); - debug("in_sdram = %d\n", in_sdram); - - if (!in_sdram) { - bypass_dpll(&prcm->cm_clkmode_dpll_core); - } - - do_sdram_init(OMAP44XX_EMIF1); - do_sdram_init(OMAP44XX_EMIF2); - - if (!in_sdram) { - dmm_init(OMAP44XX_DMM_LISA_MAP_BASE); - emif_post_init_config(OMAP44XX_EMIF1); - emif_post_init_config(OMAP44XX_EMIF2); - - } - - /* for the shadow registers to take effect */ - freq_update_core(); - - /* Do some testing after the init */ - if (!in_sdram) { - size_prog = omap4_sdram_size(); - size_detect = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, - size_prog); - /* Compare with the size programmed */ - if (size_detect != size_prog) { - printf("SDRAM: identified size not same as expected" - " size identified: %x expected: %x\n", - size_detect, - size_prog); - } else - debug("get_ram_size() successful"); - } - - debug("<<sdram_init()\n"); -} diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c new file mode 100644 index 000000000..52c9b1901 --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/hwinit.c @@ -0,0 +1,167 @@ +/* + * + * Common functions for OMAP4 based boards + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Author : + * Aneesh V <aneesh@ti.com> + * Steve Sakoman <steve@sakoman.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/armv7.h> +#include <asm/arch/cpu.h> +#include <asm/arch/sys_proto.h> +#include <asm/sizes.h> +#include <asm/emif.h> +#include <asm/arch/gpio.h> + +DECLARE_GLOBAL_DATA_PTR; + +u32 *const omap4_revision = (u32 *)OMAP4_SRAM_SCRATCH_OMAP4_REV; + +static const struct gpio_bank gpio_bank_44xx[6] = { + { (void *)OMAP44XX_GPIO1_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP44XX_GPIO2_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP44XX_GPIO3_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP44XX_GPIO4_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP44XX_GPIO5_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP44XX_GPIO6_BASE, METHOD_GPIO_24XX }, +}; + +const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx; + +#ifdef CONFIG_SPL_BUILD +/* + * Some tuning of IOs for optimal power and performance + */ +void do_io_settings(void) +{ + u32 lpddr2io; + struct control_lpddr2io_regs *lpddr2io_regs = + (struct control_lpddr2io_regs *)LPDDR2_IO_REGS_BASE; + struct omap4_sys_ctrl_regs *const ctrl = + (struct omap4_sys_ctrl_regs *)SYSCTRL_GENERAL_CORE_BASE; + + u32 omap4_rev = omap_revision(); + + if (omap4_rev == OMAP4430_ES1_0) + lpddr2io = CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN; + else if (omap4_rev == OMAP4430_ES2_0) + lpddr2io = CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER; + else + lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN; + + /* EMIF1 */ + writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_0); + writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1); + /* No pull for GR10 as per hw team's recommendation */ + writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, + &lpddr2io_regs->control_lpddr2io1_2); + writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io1_3); + + /* EMIF2 */ + writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0); + writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1); + /* No pull for GR10 as per hw team's recommendation */ + writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, + &lpddr2io_regs->control_lpddr2io2_2); + writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io2_3); + + /* + * Some of these settings (TRIM values) come from eFuse and are + * in turn programmed in the eFuse at manufacturing time after + * calibration of the device. Do the software over-ride only if + * the device is not correctly trimmed + */ + if (!(readl(&ctrl->control_std_fuse_opp_bgap) & 0xFFFF)) { + + writel(LDOSRAM_VOLT_CTRL_OVERRIDE, + &ctrl->control_ldosram_iva_voltage_ctrl); + + writel(LDOSRAM_VOLT_CTRL_OVERRIDE, + &ctrl->control_ldosram_mpu_voltage_ctrl); + + writel(LDOSRAM_VOLT_CTRL_OVERRIDE, + &ctrl->control_ldosram_core_voltage_ctrl); + } + + if (!readl(&ctrl->control_efuse_1)) + writel(CONTROL_EFUSE_1_OVERRIDE, &ctrl->control_efuse_1); + + if (!readl(&ctrl->control_efuse_2)) + writel(CONTROL_EFUSE_2_OVERRIDE, &ctrl->control_efuse_2); +} +#endif + +void init_omap_revision(void) +{ + /* + * For some of the ES2/ES1 boards ID_CODE is not reliable: + * Also, ES1 and ES2 have different ARM revisions + * So use ARM revision for identification + */ + unsigned int arm_rev = cortex_rev(); + + switch (arm_rev) { + case MIDR_CORTEX_A9_R0P1: + *omap4_revision = OMAP4430_ES1_0; + break; + case MIDR_CORTEX_A9_R1P2: + switch (readl(CONTROL_ID_CODE)) { + case OMAP4_CONTROL_ID_CODE_ES2_0: + *omap4_revision = OMAP4430_ES2_0; + break; + case OMAP4_CONTROL_ID_CODE_ES2_1: + *omap4_revision = OMAP4430_ES2_1; + break; + case OMAP4_CONTROL_ID_CODE_ES2_2: + *omap4_revision = OMAP4430_ES2_2; + break; + default: + *omap4_revision = OMAP4430_ES2_0; + break; + } + break; + case MIDR_CORTEX_A9_R1P3: + *omap4_revision = OMAP4430_ES2_3; + break; + case MIDR_CORTEX_A9_R2P10: + *omap4_revision = OMAP4460_ES1_0; + break; + default: + *omap4_revision = OMAP4430_SILICON_ID_INVALID; + break; + } +} + +#ifndef CONFIG_SYS_L2CACHE_OFF +void v7_outer_cache_enable(void) +{ + set_pl310_ctrl_reg(1); +} + +void v7_outer_cache_disable(void) +{ + set_pl310_ctrl_reg(0); +} +#endif diff --git a/arch/arm/cpu/armv7/omap4/omap4_mux_data.h b/arch/arm/cpu/armv7/omap4/omap4_mux_data.h deleted file mode 100644 index b9403910c..000000000 --- a/arch/arm/cpu/armv7/omap4/omap4_mux_data.h +++ /dev/null @@ -1,83 +0,0 @@ - /* - * (C) Copyright 2010 - * Texas Instruments Incorporated, <www.ti.com> - * - * Balaji Krishnamoorthy <balajitk@ti.com> - * Aneesh V <aneesh@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _OMAP4_MUX_DATA_H_ -#define _OMAP4_MUX_DATA_H_ - -#include <asm/arch/mux_omap4.h> - -const struct pad_conf_entry core_padconf_array_essential[] = { - -{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */ -{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */ -{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */ -{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */ -{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */ -{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */ -{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */ -{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */ -{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */ -{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */ -{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */ -{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */ -{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */ -{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */ -{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */ -{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */ -{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */ -{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */ -{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */ -{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */ -{I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */ -{I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */ -{I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */ -{I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */ -{I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */ -{I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */ -{I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */ -{I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */ -{UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */ -{UART3_RTS_SD, (M0)}, /* uart3_rts_sd */ -{UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */ -{UART3_TX_IRTX, (M0)} /* uart3_tx */ - -}; - -const struct pad_conf_entry wkup_padconf_array_essential[] = { - -{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */ -{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */ -{PAD1_SYS_32K, (IEN | M0)} /* sys_32k */ - -}; - -const struct pad_conf_entry wkup_padconf_array_essential_4460[] = { - -{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7, TPS */ - -}; - - -#endif /* _OMAP4_MUX_DATA_H_ */ diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c index edc5326c3..a5ec7d3dc 100644 --- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c +++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c @@ -26,7 +26,7 @@ * MA 02111-1307 USA */ -#include <asm/arch/emif.h> +#include <asm/emif.h> #include <asm/arch/sys_proto.h> /* diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile new file mode 100644 index 000000000..f8ca9ac36 --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/Makefile @@ -0,0 +1,48 @@ +# +# (C) Copyright 2000-2010 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS += hwinit.o +COBJS += clocks.o +COBJS += emif.o +COBJS += sdram_elpida.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/omap5/clocks.c b/arch/arm/cpu/armv7/omap5/clocks.c new file mode 100644 index 000000000..dd882a202 --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/clocks.c @@ -0,0 +1,432 @@ +/* + * + * Clock initialization for OMAP5 + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Aneesh V <aneesh@ti.com> + * Sricharan R <r.sricharan@ti.com> + * + * Based on previous work by: + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * Rajendra Nayak <rnayak@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/omap_common.h> +#include <asm/arch/clocks.h> +#include <asm/arch/sys_proto.h> +#include <asm/utils.h> +#include <asm/omap_gpio.h> + +#ifndef CONFIG_SPL_BUILD +/* + * printing to console doesn't work unless + * this code is executed from SPL + */ +#define printf(fmt, args...) +#define puts(s) +#endif + +struct omap5_prcm_regs *const prcm = (struct omap5_prcm_regs *)0x4A004100; + +const u32 sys_clk_array[8] = { + 12000000, /* 12 MHz */ + 0, /* NA */ + 16800000, /* 16.8 MHz */ + 19200000, /* 19.2 MHz */ + 26000000, /* 26 MHz */ + 0, /* NA */ + 38400000, /* 38.4 MHz */ +}; + +static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = { + {125, 0, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {625, 6, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {625, 7, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {750, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {625, 15, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params mpu_dpll_params_2ghz[NUM_SYS_CLKS] = { + {500, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {2024, 16, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {625, 5, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {1000, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {625, 11, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = { + {275, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {1375, 20, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {1375, 23, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {550, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {1375, 47, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params mpu_dpll_params_550mhz[NUM_SYS_CLKS] = { + {275, 2, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {1375, 20, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {1375, 23, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {550, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {1375, 47, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = { + {266, 2, 1, 5, 8, 4, 62, 5, 5, 7}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {570, 8, 1, 5, 8, 4, 62, 5, 5, 7}, /* 16.8 MHz */ + {665, 11, 1, 5, 8, 4, 62, 5, 5, 7}, /* 19.2 MHz */ + {532, 12, 1, 5, 8, 4, 62, 5, 5, 7}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {665, 23, 1, 5, 8, 4, 62, 5, 5, 7} /* 38.4 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = { + {266, 2, 2, 5, 8, 4, 62, 5, 5, 7}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {570, 8, 2, 5, 8, 4, 62, 5, 5, 7}, /* 16.8 MHz */ + {665, 11, 2, 5, 8, 4, 62, 5, 5, 7}, /* 19.2 MHz */ + {532, 12, 2, 5, 8, 4, 62, 5, 5, 7}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {665, 23, 2, 5, 8, 4, 62, 5, 5, 7} /* 38.4 MHz */ +}; + +static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = { + {32, 0, 4, 3, 6, 4, -1, 2, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {160, 6, 4, 3, 6, 4, -1, 2, -1, -1}, /* 16.8 MHz */ + {20, 0, 4, 3, 6, 4, -1, 2, -1, -1}, /* 19.2 MHz */ + {192, 12, 4, 3, 6, 4, -1, 2, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {10, 0, 4, 3, 6, 4, -1, 2, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = { + {931, 11, -1, -1, 4, 7, -1, -1}, /* 12 MHz */ + {931, 12, -1, -1, 4, 7, -1, -1}, /* 13 MHz */ + {665, 11, -1, -1, 4, 7, -1, -1}, /* 16.8 MHz */ + {727, 14, -1, -1, 4, 7, -1, -1}, /* 19.2 MHz */ + {931, 25, -1, -1, 4, 7, -1, -1}, /* 26 MHz */ + {931, 26, -1, -1, 4, 7, -1, -1}, /* 27 MHz */ + {412, 16, -1, -1, 4, 7, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with sys_clk as source */ +static const struct dpll_params + abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { + {49, 5, 1, 1, -1, -1, -1, -1}, /* 12 MHz */ + {68, 8, 1, 1, -1, -1, -1, -1}, /* 13 MHz */ + {35, 5, 1, 1, -1, -1, -1, -1}, /* 16.8 MHz */ + {46, 8, 1, 1, -1, -1, -1, -1}, /* 19.2 MHz */ + {34, 8, 1, 1, -1, -1, -1, -1}, /* 26 MHz */ + {29, 7, 1, 1, -1, -1, -1, -1}, /* 27 MHz */ + {64, 24, 1, 1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with 32K clock as source */ +static const struct dpll_params abe_dpll_params_32k_196608khz = { + 750, 0, 1, 1, -1, -1, -1, -1 +}; + +static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { + {80, 0, 2, -1, -1, -1, -1, -1}, /* 12 MHz */ + {960, 12, 2, -1, -1, -1, -1, -1}, /* 13 MHz */ + {400, 6, 2, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {50, 0, 2, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {480, 12, 2, -1, -1, -1, -1, -1}, /* 26 MHz */ + {320, 8, 2, -1, -1, -1, -1, -1}, /* 27 MHz */ + {25, 0, 2, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +void setup_post_dividers(u32 *const base, const struct dpll_params *params) +{ + struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; + + /* Setup post-dividers */ + if (params->m2 >= 0) + writel(params->m2, &dpll_regs->cm_div_m2_dpll); + if (params->m3 >= 0) + writel(params->m3, &dpll_regs->cm_div_m3_dpll); + if (params->h11 >= 0) + writel(params->h11, &dpll_regs->cm_div_h11_dpll); + if (params->h12 >= 0) + writel(params->h12, &dpll_regs->cm_div_h12_dpll); + if (params->h13 >= 0) + writel(params->h13, &dpll_regs->cm_div_h13_dpll); + if (params->h14 >= 0) + writel(params->h14, &dpll_regs->cm_div_h14_dpll); + if (params->h22 >= 0) + writel(params->h22, &dpll_regs->cm_div_h22_dpll); + if (params->h23 >= 0) + writel(params->h23, &dpll_regs->cm_div_h23_dpll); +} + +const struct dpll_params *get_mpu_dpll_params(void) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &mpu_dpll_params_1100mhz[sysclk_ind]; +} + +const struct dpll_params *get_core_dpll_params(void) +{ + u32 sysclk_ind = get_sys_clk_index(); + + /* Configuring the DDR to be at 532mhz */ + return &core_dpll_params_2128mhz_ddr266[sysclk_ind]; + +} + +const struct dpll_params *get_per_dpll_params(void) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &per_dpll_params_768mhz[sysclk_ind]; +} + +const struct dpll_params *get_iva_dpll_params(void) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &iva_dpll_params_2330mhz[sysclk_ind]; +} + +const struct dpll_params *get_usb_dpll_params(void) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &usb_dpll_params_1920mhz[sysclk_ind]; +} + +const struct dpll_params *get_abe_dpll_params(void) +{ +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + u32 sysclk_ind = get_sys_clk_index(); + return &abe_dpll_params_sysclk_196608khz[sysclk_ind]; +#else + return &abe_dpll_params_32k_196608khz; +#endif +} + +/* + * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva + * We set the maximum voltages allowed here because Smart-Reflex is not + * enabled in bootloader. Voltage initialization in the kernel will set + * these to the nominal values after enabling Smart-Reflex + */ +void scale_vcores(void) +{ + u32 volt; + + setup_sri2c(); + + /* Enable 1.22V from TPS for vdd_mpu */ + volt = 1220; + do_scale_tps62361(TPS62361_REG_ADDR_SET1, volt); + + /* VCORE 1 - for vdd_core */ + volt = 1000; + do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt); + + /* VCORE 2 - for vdd_MM */ + volt = 1125; + do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt); +} + +/* + * Enable essential clock domains, modules and + * do some additional special settings needed + */ +void enable_basic_clocks(void) +{ + u32 *const clk_domains_essential[] = { + &prcm->cm_l4per_clkstctrl, + &prcm->cm_l3init_clkstctrl, + &prcm->cm_memif_clkstctrl, + &prcm->cm_l4cfg_clkstctrl, + 0 + }; + + u32 *const clk_modules_hw_auto_essential[] = { + &prcm->cm_memif_emif_1_clkctrl, + &prcm->cm_memif_emif_2_clkctrl, + &prcm->cm_l4cfg_l4_cfg_clkctrl, + &prcm->cm_wkup_gpio1_clkctrl, + &prcm->cm_l4per_gpio2_clkctrl, + &prcm->cm_l4per_gpio3_clkctrl, + &prcm->cm_l4per_gpio4_clkctrl, + &prcm->cm_l4per_gpio5_clkctrl, + &prcm->cm_l4per_gpio6_clkctrl, + 0 + }; + + u32 *const clk_modules_explicit_en_essential[] = { + &prcm->cm_wkup_gptimer1_clkctrl, + &prcm->cm_l3init_hsmmc1_clkctrl, + &prcm->cm_l3init_hsmmc2_clkctrl, + &prcm->cm_l4per_gptimer2_clkctrl, + &prcm->cm_wkup_wdtimer2_clkctrl, + &prcm->cm_l4per_uart3_clkctrl, + &prcm->cm_l4per_i2c1_clkctrl, + 0 + }; + + /* Enable optional additional functional clock for GPIO4 */ + setbits_le32(&prcm->cm_l4per_gpio4_clkctrl, + GPIO4_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable 96 MHz clock for MMC1 & MMC2 */ + setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + + /* Select 32KHz clock as the source of GPTIMER1 */ + setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl, + GPTIMER1_CLKCTRL_CLKSEL_MASK); + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); +} + +void enable_basic_uboot_clocks(void) +{ + u32 *const clk_domains_essential[] = { + 0 + }; + + u32 *const clk_modules_hw_auto_essential[] = { + 0 + }; + + u32 *const clk_modules_explicit_en_essential[] = { + &prcm->cm_l4per_mcspi1_clkctrl, + &prcm->cm_l4per_i2c2_clkctrl, + &prcm->cm_l4per_i2c3_clkctrl, + &prcm->cm_l4per_i2c4_clkctrl, + 0 + }; + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); +} + +/* + * Enable non-essential clock domains, modules and + * do some additional special settings needed + */ +void enable_non_essential_clocks(void) +{ + u32 *const clk_domains_non_essential[] = { + &prcm->cm_mpu_m3_clkstctrl, + &prcm->cm_ivahd_clkstctrl, + &prcm->cm_dsp_clkstctrl, + &prcm->cm_dss_clkstctrl, + &prcm->cm_sgx_clkstctrl, + &prcm->cm1_abe_clkstctrl, + &prcm->cm_c2c_clkstctrl, + &prcm->cm_cam_clkstctrl, + &prcm->cm_dss_clkstctrl, + &prcm->cm_sdma_clkstctrl, + 0 + }; + + u32 *const clk_modules_hw_auto_non_essential[] = { + &prcm->cm_mpu_m3_mpu_m3_clkctrl, + &prcm->cm_ivahd_ivahd_clkctrl, + &prcm->cm_ivahd_sl2_clkctrl, + &prcm->cm_dsp_dsp_clkctrl, + &prcm->cm_l3_2_gpmc_clkctrl, + &prcm->cm_l3instr_l3_3_clkctrl, + &prcm->cm_l3instr_l3_instr_clkctrl, + &prcm->cm_l3instr_intrconn_wp1_clkctrl, + &prcm->cm_l3init_hsi_clkctrl, + &prcm->cm_l3init_hsusbtll_clkctrl, + 0 + }; + + u32 *const clk_modules_explicit_en_non_essential[] = { + &prcm->cm1_abe_aess_clkctrl, + &prcm->cm1_abe_pdm_clkctrl, + &prcm->cm1_abe_dmic_clkctrl, + &prcm->cm1_abe_mcasp_clkctrl, + &prcm->cm1_abe_mcbsp1_clkctrl, + &prcm->cm1_abe_mcbsp2_clkctrl, + &prcm->cm1_abe_mcbsp3_clkctrl, + &prcm->cm1_abe_slimbus_clkctrl, + &prcm->cm1_abe_timer5_clkctrl, + &prcm->cm1_abe_timer6_clkctrl, + &prcm->cm1_abe_timer7_clkctrl, + &prcm->cm1_abe_timer8_clkctrl, + &prcm->cm1_abe_wdt3_clkctrl, + &prcm->cm_l4per_gptimer9_clkctrl, + &prcm->cm_l4per_gptimer10_clkctrl, + &prcm->cm_l4per_gptimer11_clkctrl, + &prcm->cm_l4per_gptimer3_clkctrl, + &prcm->cm_l4per_gptimer4_clkctrl, + &prcm->cm_l4per_hdq1w_clkctrl, + &prcm->cm_l4per_mcspi2_clkctrl, + &prcm->cm_l4per_mcspi3_clkctrl, + &prcm->cm_l4per_mcspi4_clkctrl, + &prcm->cm_l4per_mmcsd3_clkctrl, + &prcm->cm_l4per_mmcsd4_clkctrl, + &prcm->cm_l4per_mmcsd5_clkctrl, + &prcm->cm_l4per_uart1_clkctrl, + &prcm->cm_l4per_uart2_clkctrl, + &prcm->cm_l4per_uart4_clkctrl, + &prcm->cm_wkup_keyboard_clkctrl, + &prcm->cm_wkup_wdtimer2_clkctrl, + &prcm->cm_cam_iss_clkctrl, + &prcm->cm_cam_fdif_clkctrl, + &prcm->cm_dss_dss_clkctrl, + &prcm->cm_sgx_sgx_clkctrl, + &prcm->cm_l3init_hsusbhost_clkctrl, + &prcm->cm_l3init_fsusb_clkctrl, + 0 + }; + + /* Enable optional functional clock for ISS */ + setbits_le32(&prcm->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable all optional functional clocks of DSS */ + setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); + + do_enable_clocks(clk_domains_non_essential, + clk_modules_hw_auto_non_essential, + clk_modules_explicit_en_non_essential, + 0); + + /* Put camera module in no sleep mode */ + clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK, + CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << + MODULE_CLKCTRL_MODULEMODE_SHIFT); +} diff --git a/arch/arm/cpu/armv7/omap5/config.mk b/arch/arm/cpu/armv7/omap5/config.mk new file mode 100644 index 000000000..639f69904 --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/config.mk @@ -0,0 +1,28 @@ +# +# Copyright 2011 Linaro Limited +# See file CREDITS for list of people who contributed to this +# project. +# +# Aneesh V <annesh@ti.com> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +ifdef CONFIG_SPL_BUILD +ALL-y += $(OBJTREE)/MLO +else +ALL-y += $(obj)u-boot.img +endif diff --git a/arch/arm/cpu/armv7/omap5/emif.c b/arch/arm/cpu/armv7/omap5/emif.c new file mode 100644 index 000000000..8019ffe3d --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/emif.c @@ -0,0 +1,105 @@ +/* + * EMIF programming + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Aneesh V <aneesh@ti.com> for OMAP4 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/emif.h> +#include <asm/arch/sys_proto.h> +#include <asm/utils.h> + +#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg)) +static u32 *const T_num = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_NUM; +static u32 *const T_den = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_DEN; +static u32 *const emif_sizes = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_SIZE; +#endif + +#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS +/* Base AC Timing values specified by JESD209-2 for 532MHz operation */ +static const struct lpddr2_ac_timings timings_jedec_532_mhz = { + .max_freq = 532000000, + .RL = 8, + .tRPab = 21, + .tRCD = 18, + .tWR = 15, + .tRASmin = 42, + .tRRD = 10, + .tWTRx2 = 15, + .tXSR = 140, + .tXPx2 = 15, + .tRFCab = 130, + .tRTPx2 = 15, + .tCKE = 3, + .tCKESR = 15, + .tZQCS = 90, + .tZQCL = 360, + .tZQINIT = 1000, + .tDQSCKMAXx2 = 11, + .tRASmax = 70, + .tFAW = 50 +}; + +/* + * Min tCK values specified by JESD209-2 + * Min tCK specifies the minimum duration of some AC timing parameters in terms + * of the number of cycles. If the calculated number of cycles based on the + * absolute time value is less than the min tCK value, min tCK value should + * be used instead. This typically happens at low frequencies. + */ +static const struct lpddr2_min_tck min_tck_jedec = { + .tRL = 3, + .tRP_AB = 3, + .tRCD = 3, + .tWR = 3, + .tRAS_MIN = 3, + .tRRD = 2, + .tWTR = 2, + .tXP = 2, + .tRTP = 2, + .tCKE = 3, + .tCKESR = 3, + .tFAW = 8 +}; + +static const struct lpddr2_ac_timings const* + jedec_ac_timings[MAX_NUM_SPEEDBINS] = { + &timings_jedec_532_mhz +}; + +static const struct lpddr2_device_timings jedec_default_timings = { + .ac_timings = jedec_ac_timings, + .min_tck = &min_tck_jedec +}; + +void emif_get_device_timings(u32 emif_nr, + const struct lpddr2_device_timings **cs0_device_timings, + const struct lpddr2_device_timings **cs1_device_timings) +{ + /* Assume Identical devices on EMIF1 & EMIF2 */ + *cs0_device_timings = &jedec_default_timings; + *cs1_device_timings = NULL; +} +#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */ diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c new file mode 100644 index 000000000..fa8e390c1 --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -0,0 +1,78 @@ +/* + * + * Functions for omap5 based boards. + * + * (C) Copyright 2011 + * Texas Instruments, <www.ti.com> + * + * Author : + * Aneesh V <aneesh@ti.com> + * Steve Sakoman <steve@sakoman.com> + * Sricharan <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/armv7.h> +#include <asm/arch/cpu.h> +#include <asm/arch/sys_proto.h> +#include <asm/sizes.h> +#include <asm/utils.h> +#include <asm/arch/gpio.h> + +DECLARE_GLOBAL_DATA_PTR; + +u32 *const omap5_revision = (u32 *)OMAP5_SRAM_SCRATCH_OMAP5_REV; + +static struct gpio_bank gpio_bank_54xx[6] = { + { (void *)OMAP54XX_GPIO1_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP54XX_GPIO2_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP54XX_GPIO3_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP54XX_GPIO4_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP54XX_GPIO5_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP54XX_GPIO6_BASE, METHOD_GPIO_24XX }, +}; + +const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx; + +#ifdef CONFIG_SPL_BUILD +/* + * Some tuning of IOs for optimal power and performance + */ +void do_io_settings(void) +{ +} +#endif + +void init_omap_revision(void) +{ + /* + * For some of the ES2/ES1 boards ID_CODE is not reliable: + * Also, ES1 and ES2 have different ARM revisions + * So use ARM revision for identification + */ + unsigned int rev = cortex_rev(); + + switch (rev) { + case MIDR_CORTEX_A15_R0P0: + *omap5_revision = OMAP5430_ES1_0; + default: + *omap5_revision = OMAP5430_SILICON_ID_INVALID; + } +} diff --git a/arch/arm/cpu/armv7/omap5/sdram_elpida.c b/arch/arm/cpu/armv7/omap5/sdram_elpida.c new file mode 100644 index 000000000..ad198e6d1 --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/sdram_elpida.c @@ -0,0 +1,178 @@ +/* + * Timing and Organization details of the Elpida parts used in OMAP5 + * EVM + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Aneesh V <aneesh@ti.com> + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/emif.h> +#include <asm/arch/sys_proto.h> + +/* + * This file provides details of the LPDDR2 SDRAM parts used on OMAP5 + * EVM. Since the parts used and geometry are identical for + * evm for a given OMAP5 revision, this information is kept + * here instead of being in board directory. However the key functions + * exported are weakly linked so that they can be over-ridden in the board + * directory if there is a OMAP5 board in the future that uses a different + * memory device or geometry. + * + * For any new board with different memory devices over-ride one or more + * of the following functions as per the CONFIG flags you intend to enable: + * - emif_get_reg_dump() + * - emif_get_dmm_regs() + * - emif_get_device_details() + * - emif_get_device_timings() + */ + +#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS + +const struct emif_regs emif_regs_elpida_532_mhz_1cs = { + .sdram_config_init = 0x80801aB2, + .sdram_config = 0x808022B2, + .ref_ctrl = 0x0000081A, + .sdram_tim1 = 0x772F6873, + .sdram_tim2 = 0x304A129A, + .sdram_tim3 = 0x02F7E45F, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x000B3215, + .temp_alert_config = 0x08000A05, + .emif_ddr_phy_ctlr_1_init = 0x0E38200D, + .emif_ddr_phy_ctlr_1 = 0x0E38200D +}; + +const struct dmm_lisa_map_regs lisa_map_4G_x_1_x_2 = { + .dmm_lisa_map_0 = 0xFF020100, + .dmm_lisa_map_1 = 0, + .dmm_lisa_map_2 = 0, + .dmm_lisa_map_3 = 0x80640300 +}; + +static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) +{ + *regs = &emif_regs_elpida_532_mhz_1cs; +} +void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) + __attribute__((weak, alias("emif_get_reg_dump_sdp"))); + +static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs + **dmm_lisa_regs) +{ + *dmm_lisa_regs = &lisa_map_4G_x_1_x_2; +} + +void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) + __attribute__((weak, alias("emif_get_dmm_regs_sdp"))); + +#else + +static const struct lpddr2_device_details elpida_4G_S4_details = { + .type = LPDDR2_TYPE_S4, + .density = LPDDR2_DENSITY_4Gb, + .io_width = LPDDR2_IO_WIDTH_32, + .manufacturer = LPDDR2_MANUFACTURER_ELPIDA +}; + +static void emif_get_device_details_sdp(u32 emif_nr, + struct lpddr2_device_details *cs0_device_details, + struct lpddr2_device_details *cs1_device_details) +{ + /* EMIF1 & EMIF2 have identical configuration */ + *cs0_device_details = elpida_4G_S4_details; + + /* Nothing is conected on cs1 */ + cs1_device_details = NULL; +} + +void emif_get_device_details(u32 emif_nr, + struct lpddr2_device_details *cs0_device_details, + struct lpddr2_device_details *cs1_device_details) + __attribute__((weak, alias("emif_get_device_details_sdp"))); + +#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ + +#ifndef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS +static const struct lpddr2_ac_timings timings_jedec_532_mhz = { + .max_freq = 532000000, + .RL = 8, + .tRPab = 21, + .tRCD = 18, + .tWR = 15, + .tRASmin = 42, + .tRRD = 10, + .tWTRx2 = 15, + .tXSR = 140, + .tXPx2 = 15, + .tRFCab = 130, + .tRTPx2 = 15, + .tCKE = 3, + .tCKESR = 15, + .tZQCS = 90, + .tZQCL = 360, + .tZQINIT = 1000, + .tDQSCKMAXx2 = 11, + .tRASmax = 70, + .tFAW = 50 +}; + +static const struct lpddr2_min_tck min_tck_elpida = { + .tRL = 3, + .tRP_AB = 3, + .tRCD = 3, + .tWR = 3, + .tRAS_MIN = 3, + .tRRD = 2, + .tWTR = 2, + .tXP = 2, + .tRTP = 2, + .tCKE = 3, + .tCKESR = 3, + .tFAW = 8 +}; + +static const struct lpddr2_ac_timings *elpida_ac_timings[MAX_NUM_SPEEDBINS] = { + &timings_jedec_532_mhz +}; + +static const struct lpddr2_device_timings elpida_4G_S4_timings = { + .ac_timings = elpida_ac_timings, + .min_tck = &min_tck_elpida, +}; + +void emif_get_device_timings_sdp(u32 emif_nr, + const struct lpddr2_device_timings **cs0_device_timings, + const struct lpddr2_device_timings **cs1_device_timings) +{ + /* Identical devices on EMIF1 & EMIF2 */ + *cs0_device_timings = &elpida_4G_S4_timings; + *cs1_device_timings = NULL; +} + +void emif_get_device_timings(u32 emif_nr, + const struct lpddr2_device_timings **cs0_device_timings, + const struct lpddr2_device_timings **cs1_device_timings) + __attribute__((weak, alias("emif_get_device_timings_sdp"))); + +#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */ diff --git a/arch/arm/include/asm/arch-davinci/aintc_defs.h b/arch/arm/include/asm/arch-davinci/aintc_defs.h index 8f3705320..38f814c01 100644 --- a/arch/arm/include/asm/arch-davinci/aintc_defs.h +++ b/arch/arm/include/asm/arch-davinci/aintc_defs.h @@ -47,4 +47,6 @@ struct dv_aintc_regs { #define dv_aintc_regs ((struct dv_aintc_regs *)DAVINCI_ARM_INTC_BASE) +#define DV_AINTC_INTCTL_IDMODE (1 << 2) + #endif /* _DV_AINTC_DEFS_H_ */ diff --git a/arch/arm/include/asm/arch-davinci/am1808_lowlevel.h b/arch/arm/include/asm/arch-davinci/da850_lowlevel.h index 0bc7f76f1..e489c4747 100644 --- a/arch/arm/include/asm/arch-davinci/am1808_lowlevel.h +++ b/arch/arm/include/asm/arch-davinci/da850_lowlevel.h @@ -1,5 +1,5 @@ /* - * SoC-specific lowlevel code for AM1808 and similar chips + * SoC-specific lowlevel code for DA850 * * Copyright (C) 2011 * Heiko Schocher, DENX Software Engineering, hs@denx.de. @@ -21,24 +21,24 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef __AM1808_LOWLEVEL_H -#define __AM1808_LOWLEVEL_H +#ifndef __DA850_LOWLEVEL_H +#define __DA850_LOWLEVEL_H /* NOR Boot Configuration Word Field Descriptions */ -#define AM1808_NORBOOT_COPY_XK(X) ((X - 1) << 8) -#define AM1808_NORBOOT_METHOD_DIRECT (1 << 4) -#define AM1808_NORBOOT_16BIT (1 << 0) +#define DA850_NORBOOT_COPY_XK(X) ((X - 1) << 8) +#define DA850_NORBOOT_METHOD_DIRECT (1 << 4) +#define DA850_NORBOOT_16BIT (1 << 0) #define dv_maskbits(addr, val) \ writel((readl(addr) & val), addr) -void am1808_waitloop(unsigned long loopcnt); -int am1808_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult); -void am1808_lpc_transition(unsigned char pscnum, unsigned char module, +void da850_waitloop(unsigned long loopcnt); +int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult); +void da850_lpc_transition(unsigned char pscnum, unsigned char module, unsigned char domain, unsigned char state); -int am1808_ddr_setup(unsigned int freq); -void am1808_psc_init(void); -void am1808_pinmux_ctl(unsigned long offset, unsigned long mask, +int da850_ddr_setup(void); +void da850_psc_init(void); +void da850_pinmux_ctl(unsigned long offset, unsigned long mask, unsigned long value); -#endif /* #ifndef __AM1808_LOWLEVEL_H */ +#endif /* #ifndef __DA850_LOWLEVEL_H */ diff --git a/arch/arm/include/asm/arch-davinci/ddr2_defs.h b/arch/arm/include/asm/arch-davinci/ddr2_defs.h index 1b9430ce6..4f943b81b 100644 --- a/arch/arm/include/asm/arch-davinci/ddr2_defs.h +++ b/arch/arm/include/asm/arch-davinci/ddr2_defs.h @@ -63,6 +63,7 @@ struct dv_ddr2_regs_ctrl { #define DV_DDR_SDTMR2_RASMAX_SHIFT 27 #define DV_DDR_SDTMR2_XP_SHIFT 25 +#define DV_DDR_SDTMR2_ODT_SHIFT 23 #define DV_DDR_SDTMR2_XSNR_SHIFT 16 #define DV_DDR_SDTMR2_XSRD_SHIFT 8 #define DV_DDR_SDTMR2_RTP_SHIFT 5 @@ -84,6 +85,9 @@ struct dv_ddr2_regs_ctrl { #define DV_DDR_SDCR_IBANK_SHIFT 4 #define DV_DDR_SDCR_PAGESIZE_SHIFT 0 +#define DV_DDR_SDRCR_LPMODEN (1 << 31) +#define DV_DDR_SDRCR_MCLKSTOPEN (1 << 30) + #define DV_DDR_SRCR_LPMODEN_SHIFT 31 #define DV_DDR_SRCR_MCLKSTOPEN_SHIFT 30 diff --git a/arch/arm/include/asm/arch-davinci/emif_defs.h b/arch/arm/include/asm/arch-davinci/emif_defs.h index b48ec17e9..b9e78a5db 100644 --- a/arch/arm/include/asm/arch-davinci/emif_defs.h +++ b/arch/arm/include/asm/arch-davinci/emif_defs.h @@ -70,6 +70,7 @@ struct davinci_emif_regs { #define DAVINCI_NANDFCR_1BIT_ECC_START(n) (1 << (8 + (n-2))) #define DAVINCI_NANDFCR_4BIT_ECC_START (1 << 12) #define DAVINCI_NANDFCR_4BIT_CALC_START (1 << 13) +#define DAVINCI_NANDFCR_CS2NAND (1 << 0) /* Chip Select setup */ #define DAVINCI_ABCR_STROBE_SELECT (1 << 31) diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h index bea14993e..3e9a3b6de 100644 --- a/arch/arm/include/asm/arch-davinci/hardware.h +++ b/arch/arm/include/asm/arch-davinci/hardware.h @@ -230,6 +230,9 @@ typedef volatile unsigned int * dv_reg_p; #define DAVINCI_LPSC_CFG5 38 #define DAVINCI_LPSC_GEM 39 #define DAVINCI_LPSC_IMCOP 40 +#define DAVINCI_LPSC_VPSSMASTER 47 +#define DAVINCI_LPSC_MJCP 50 +#define DAVINCI_LPSC_HDVICP 51 #define DAVINCI_DM646X_LPSC_EMAC 14 #define DAVINCI_DM646X_LPSC_UART0 26 @@ -385,6 +388,20 @@ struct davinci_psc_regs { #define PINMUX3 0x01c4000c #define PINMUX4 0x01c40010 +struct davinci_uart_ctrl_regs { + dv_reg revid1; + dv_reg res; + dv_reg pwremu_mgmt; + dv_reg mdr; +}; + +#define DAVINCI_UART_CTRL_BASE 0x28 + +/* UART PWREMU_MGMT definitions */ +#define DAVINCI_UART_PWREMU_MGMT_FREE (1 << 0) +#define DAVINCI_UART_PWREMU_MGMT_URRST (1 << 13) +#define DAVINCI_UART_PWREMU_MGMT_UTRST (1 << 14) + #else /* CONFIG_SOC_DA8XX */ struct davinci_pllc_regs { @@ -431,6 +448,7 @@ struct davinci_pllc_regs { enum davinci_clk_ids { DAVINCI_SPI0_CLKID = 2, DAVINCI_UART2_CLKID = 2, + DAVINCI_MMC_CLKID = 2, DAVINCI_MDIO_CLKID = 4, DAVINCI_ARM_CLKID = 6, DAVINCI_PLLM_CLKID = 0xff, @@ -468,6 +486,7 @@ struct davinci_syscfg_regs { #define DAVINCI_SYSCFG_SUSPSRC_SPI0 (1 << 21) #define DAVINCI_SYSCFG_SUSPSRC_SPI1 (1 << 22) #define DAVINCI_SYSCFG_SUSPSRC_UART0 (1 << 18) +#define DAVINCI_SYSCFG_SUSPSRC_UART2 (1 << 20) #define DAVINCI_SYSCFG_SUSPSRC_TIMER0 (1 << 27) struct davinci_syscfg1_regs { @@ -491,6 +510,9 @@ struct davinci_syscfg1_regs { #define VTP_READY (1 << 15) #define VTP_IOPWRDWN (1 << 14) +#define DV_SYSCFG_KICK0_UNLOCK 0x83e70b13 +#define DV_SYSCFG_KICK1_UNLOCK 0x95a4f1e0 + /* Interrupt controller */ struct davinci_aintc_regs { dv_reg revid; diff --git a/arch/arm/include/asm/arch-davinci/pll_defs.h b/arch/arm/include/asm/arch-davinci/pll_defs.h index 5c309533a..f1396e319 100644 --- a/arch/arm/include/asm/arch-davinci/pll_defs.h +++ b/arch/arm/include/asm/arch-davinci/pll_defs.h @@ -57,11 +57,24 @@ struct dv_pll_regs { unsigned int plldiv9; /* 0x174 */ }; +#define PLL_MASTER_LOCK (1 << 4) + +#define PLLCTL_CLOCK_MODE_SHIFT 8 #define PLLCTL_PLLEN (1 << 0) #define PLLCTL_PLLPWRDN (1 << 1) #define PLLCTL_PLLRST (1 << 3) +#define PLLCTL_PLLDIS (1 << 4) #define PLLCTL_PLLENSRC (1 << 5) #define PLLCTL_RES_9 (1 << 8) +#define PLLCTL_EXTCLKSRC (1 << 9) + +#define PLL_POSTDEN (1 << 15) + +#define PLL_SCSCFG3_DIV45PENA (1 << 2) +#define PLL_SCSCFG3_EMA_CLKSRC (1 << 1) + +#define PLL_RSTYPE_POR (1 << 0) +#define PLL_RSTYPE_XWRST (1 << 1) #define PLLSECCTL_TINITZ (1 << 16) #define PLLSECCTL_TENABLE (1 << 17) @@ -69,6 +82,7 @@ struct dv_pll_regs { #define PLLSECCTL_STOPMODE (1 << 22) #define PLLCMD_GOSET (1 << 0) +#define PLLCMD_GOSTAT (1 << 0) #define PLL0_LOCK 0x07000000 #define PLL1_LOCK 0x07000000 diff --git a/arch/arm/include/asm/arch-mx28/clock.h b/arch/arm/include/asm/arch-mx28/clock.h new file mode 100644 index 000000000..1700fe391 --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/clock.h @@ -0,0 +1,61 @@ +/* + * Freescale i.MX28 Clock + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __CLOCK_H__ +#define __CLOCK_H__ + +enum mxc_clock { + MXC_ARM_CLK = 0, + MXC_AHB_CLK, + MXC_IPG_CLK, + MXC_EMI_CLK, + MXC_GPMI_CLK, + MXC_IO0_CLK, + MXC_IO1_CLK, + MXC_SSP0_CLK, + MXC_SSP1_CLK, + MXC_SSP2_CLK, + MXC_SSP3_CLK, +}; + +enum mxs_ioclock { + MXC_IOCLK0 = 0, + MXC_IOCLK1, +}; + +enum mxs_sspclock { + MXC_SSPCLK0 = 0, + MXC_SSPCLK1, + MXC_SSPCLK2, + MXC_SSPCLK3, +}; + +uint32_t mxc_get_clock(enum mxc_clock clk); + +void mx28_set_ioclk(enum mxs_ioclock io, uint32_t freq); +void mx28_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal); +void mx28_set_ssp_busclock(unsigned int bus, uint32_t freq); + +/* Compatibility with the FEC Ethernet driver */ +#define imx_get_fecclk() mxc_get_clock(MXC_AHB_CLK) + +#endif /* __CLOCK_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/dma.h b/arch/arm/include/asm/arch-mx28/dma.h new file mode 100644 index 000000000..7061e7c2f --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/dma.h @@ -0,0 +1,170 @@ +/* + * Freescale i.MX28 APBH DMA + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __DMA_H__ +#define __DMA_H__ + +#include <linux/list.h> + +#ifndef CONFIG_ARCH_DMA_PIO_WORDS +#define DMA_PIO_WORDS 15 +#else +#define DMA_PIO_WORDS CONFIG_ARCH_DMA_PIO_WORDS +#endif + +#define MXS_DMA_ALIGNMENT 32 + +/* + * MXS DMA channels + */ +enum { + MXS_DMA_CHANNEL_AHB_APBH_SSP0 = 0, + MXS_DMA_CHANNEL_AHB_APBH_SSP1, + MXS_DMA_CHANNEL_AHB_APBH_SSP2, + MXS_DMA_CHANNEL_AHB_APBH_SSP3, + MXS_DMA_CHANNEL_AHB_APBH_GPMI0, + MXS_DMA_CHANNEL_AHB_APBH_GPMI1, + MXS_DMA_CHANNEL_AHB_APBH_GPMI2, + MXS_DMA_CHANNEL_AHB_APBH_GPMI3, + MXS_DMA_CHANNEL_AHB_APBH_GPMI4, + MXS_DMA_CHANNEL_AHB_APBH_GPMI5, + MXS_DMA_CHANNEL_AHB_APBH_GPMI6, + MXS_DMA_CHANNEL_AHB_APBH_GPMI7, + MXS_DMA_CHANNEL_AHB_APBH_SSP, + MXS_MAX_DMA_CHANNELS, +}; + +/* + * MXS DMA hardware command. + * + * This structure describes the in-memory layout of an entire DMA command, + * including space for the maximum number of PIO accesses. See the appropriate + * reference manual for a detailed description of what these fields mean to the + * DMA hardware. + */ +#define MXS_DMA_DESC_COMMAND_MASK 0x3 +#define MXS_DMA_DESC_COMMAND_OFFSET 0 +#define MXS_DMA_DESC_COMMAND_NO_DMAXFER 0x0 +#define MXS_DMA_DESC_COMMAND_DMA_WRITE 0x1 +#define MXS_DMA_DESC_COMMAND_DMA_READ 0x2 +#define MXS_DMA_DESC_COMMAND_DMA_SENSE 0x3 +#define MXS_DMA_DESC_CHAIN (1 << 2) +#define MXS_DMA_DESC_IRQ (1 << 3) +#define MXS_DMA_DESC_NAND_LOCK (1 << 4) +#define MXS_DMA_DESC_NAND_WAIT_4_READY (1 << 5) +#define MXS_DMA_DESC_DEC_SEM (1 << 6) +#define MXS_DMA_DESC_WAIT4END (1 << 7) +#define MXS_DMA_DESC_HALT_ON_TERMINATE (1 << 8) +#define MXS_DMA_DESC_TERMINATE_FLUSH (1 << 9) +#define MXS_DMA_DESC_PIO_WORDS_MASK (0xf << 12) +#define MXS_DMA_DESC_PIO_WORDS_OFFSET 12 +#define MXS_DMA_DESC_BYTES_MASK (0xffff << 16) +#define MXS_DMA_DESC_BYTES_OFFSET 16 + +struct mxs_dma_cmd { + unsigned long next; + unsigned long data; + union { + dma_addr_t address; + unsigned long alternate; + }; + unsigned long pio_words[DMA_PIO_WORDS]; +}; + +/* + * MXS DMA command descriptor. + * + * This structure incorporates an MXS DMA hardware command structure, along + * with metadata. + */ +#define MXS_DMA_DESC_FIRST (1 << 0) +#define MXS_DMA_DESC_LAST (1 << 1) +#define MXS_DMA_DESC_READY (1 << 31) + +struct mxs_dma_desc { + struct mxs_dma_cmd cmd; + unsigned int flags; + dma_addr_t address; + void *buffer; + struct list_head node; +}; + +/** + * MXS DMA channel + * + * This structure represents a single DMA channel. The MXS platform code + * maintains an array of these structures to represent every DMA channel in the + * system (see mxs_dma_channels). + */ +#define MXS_DMA_FLAGS_IDLE 0 +#define MXS_DMA_FLAGS_BUSY (1 << 0) +#define MXS_DMA_FLAGS_FREE 0 +#define MXS_DMA_FLAGS_ALLOCATED (1 << 16) +#define MXS_DMA_FLAGS_VALID (1 << 31) + +struct mxs_dma_chan { + const char *name; + unsigned long dev; + struct mxs_dma_device *dma; + unsigned int flags; + unsigned int active_num; + unsigned int pending_num; + struct list_head active; + struct list_head done; +}; + +/* Hardware management ops */ +int mxs_dma_enable(int channel); +int mxs_dma_disable(int channel); +int mxs_dma_reset(int channel); +int mxs_dma_freeze(int channel); +int mxs_dma_unfreeze(int channel); +int mxs_dma_read_semaphore(int channel); +int mxs_dma_enable_irq(int channel, int enable); +int mxs_dma_irq_is_pending(int channel); +int mxs_dma_ack_irq(int channel); + +/* Channel management ops */ +int mxs_dma_request(int channel); +int mxs_dma_release(int channel); + +/* Descriptor management ops */ +struct mxs_dma_desc *mxs_dma_desc_alloc(void); +void mxs_dma_desc_free(struct mxs_dma_desc *); + +unsigned int mxs_dma_cmd_address(struct mxs_dma_desc *desc); +int mxs_dma_desc_pending(struct mxs_dma_desc *pdesc); + +int mxs_dma_desc_append(int channel, struct mxs_dma_desc *pdesc); + +int mxs_dma_get_finished(int channel, struct list_head *head); +int mxs_dma_finish(int channel, struct list_head *head); + +int mxs_dma_wait_complete(uint32_t timeout, unsigned int chan); +int mxs_dma_go(int chan); + +int mxs_dma_init(void); + +#endif /* __DMA_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/gpio.h b/arch/arm/include/asm/arch-mx28/gpio.h new file mode 100644 index 000000000..be1c944eb --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/gpio.h @@ -0,0 +1,32 @@ +/* + * Freescale i.MX28 GPIO + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __MX28_GPIO_H__ +#define __MX28_GPIO_H__ + +#ifdef CONFIG_MXS_GPIO +void mxs_gpio_init(void); +#else +inline void mxs_gpio_init(void) {} +#endif + +#endif /* __MX28_GPIO_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/imx-regs.h b/arch/arm/include/asm/arch-mx28/imx-regs.h new file mode 100644 index 000000000..9561b5e48 --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/imx-regs.h @@ -0,0 +1,39 @@ +/* + * Freescale i.MX28 Registers + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __IMX_REGS_H__ +#define __IMX_REGS_H__ + +#include <asm/arch/regs-apbh.h> +#include <asm/arch/regs-base.h> +#include <asm/arch/regs-bch.h> +#include <asm/arch/regs-clkctrl.h> +#include <asm/arch/regs-gpmi.h> +#include <asm/arch/regs-i2c.h> +#include <asm/arch/regs-ocotp.h> +#include <asm/arch/regs-pinctrl.h> +#include <asm/arch/regs-power.h> +#include <asm/arch/regs-rtc.h> +#include <asm/arch/regs-ssp.h> +#include <asm/arch/regs-timrot.h> + +#endif /* __IMX_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/iomux-mx28.h b/arch/arm/include/asm/arch-mx28/iomux-mx28.h new file mode 100644 index 000000000..b42820de7 --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/iomux-mx28.h @@ -0,0 +1,537 @@ +/* + * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __MACH_IOMUX_MX28_H__ +#define __MACH_IOMUX_MX28_H__ + +#include <asm/arch/iomux.h> + +/* + * The naming convention for the pad modes is MX28_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num> + * See also iomux.h + * + * BANK PIN MUX + */ +/* MUXSEL_0 */ +#define MX28_PAD_GPMI_D00__GPMI_D0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D01__GPMI_D1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D02__GPMI_D2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D03__GPMI_D3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D04__GPMI_D4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D05__GPMI_D5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D06__GPMI_D6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D07__GPMI_D7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_CE0N__GPMI_CE0N MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_CE1N__GPMI_CE1N MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_CE2N__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_CE3N__GPMI_CE3N MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_RDY0__GPMI_READY0 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_RDY1__GPMI_READY1 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_RDY2__GPMI_READY2 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_RDY3__GPMI_READY3 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_RDN__GPMI_RDN MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_WRN__GPMI_WRN MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_ALE__GPMI_ALE MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_CLE__GPMI_CLE MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_RESETN__GPMI_RESETN MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0) + +#define MX28_PAD_LCD_D00__LCD_D0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D01__LCD_D1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D02__LCD_D2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D03__LCD_D3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D04__LCD_D4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D05__LCD_D5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D06__LCD_D6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D07__LCD_D7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D08__LCD_D8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D09__LCD_D9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D10__LCD_D10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D11__LCD_D11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D12__LCD_D12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D13__LCD_D13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D14__LCD_D14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D15__LCD_D15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D16__LCD_D16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D17__LCD_D17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D18__LCD_D18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D19__LCD_D19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D20__LCD_D20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D21__LCD_D21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D22__LCD_D22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D23__LCD_D23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0) +#define MX28_PAD_LCD_RD_E__LCD_RD_E MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0) +#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0) +#define MX28_PAD_LCD_RS__LCD_RS MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0) +#define MX28_PAD_LCD_CS__LCD_CS MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0) +#define MX28_PAD_LCD_VSYNC__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0) +#define MX28_PAD_LCD_HSYNC__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0) +#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0) +#define MX28_PAD_LCD_ENABLE__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_0) + +#define MX28_PAD_SSP0_DATA0__SSP0_D0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA1__SSP0_D1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA2__SSP0_D2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA3__SSP0_D3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA4__SSP0_D4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA5__SSP0_D5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA6__SSP0_D6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA7__SSP0_D7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_CMD__SSP0_CMD MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_SCK__SSP0_SCK MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0) +#define MX28_PAD_SSP1_SCK__SSP1_SCK MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0) +#define MX28_PAD_SSP1_CMD__SSP1_CMD MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0) +#define MX28_PAD_SSP1_DATA0__SSP1_D0 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0) +#define MX28_PAD_SSP1_DATA3__SSP1_D3 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0) +#define MX28_PAD_SSP2_SCK__SSP2_SCK MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0) +#define MX28_PAD_SSP2_MOSI__SSP2_CMD MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0) +#define MX28_PAD_SSP2_MISO__SSP2_D0 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0) +#define MX28_PAD_SSP2_SS0__SSP2_D3 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0) +#define MX28_PAD_SSP2_SS1__SSP2_D4 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0) +#define MX28_PAD_SSP2_SS2__SSP2_D5 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0) +#define MX28_PAD_SSP3_SCK__SSP3_SCK MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0) +#define MX28_PAD_SSP3_MOSI__SSP3_CMD MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0) +#define MX28_PAD_SSP3_MISO__SSP3_D0 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0) +#define MX28_PAD_SSP3_SS0__SSP3_D3 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0) + +#define MX28_PAD_AUART0_RX__AUART0_RX MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_0) +#define MX28_PAD_AUART0_TX__AUART0_TX MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_0) +#define MX28_PAD_AUART0_CTS__AUART0_CTS MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_0) +#define MX28_PAD_AUART0_RTS__AUART0_RTS MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_0) +#define MX28_PAD_AUART1_RX__AUART1_RX MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_0) +#define MX28_PAD_AUART1_TX__AUART1_TX MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_0) +#define MX28_PAD_AUART1_CTS__AUART1_CTS MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_0) +#define MX28_PAD_AUART1_RTS__AUART1_RTS MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_0) +#define MX28_PAD_AUART2_RX__AUART2_RX MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_0) +#define MX28_PAD_AUART2_TX__AUART2_TX MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_0) +#define MX28_PAD_AUART2_CTS__AUART2_CTS MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0) +#define MX28_PAD_AUART2_RTS__AUART2_RTS MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0) +#define MX28_PAD_AUART3_RX__AUART3_RX MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0) +#define MX28_PAD_AUART3_TX__AUART3_TX MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0) +#define MX28_PAD_AUART3_CTS__AUART3_CTS MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0) +#define MX28_PAD_AUART3_RTS__AUART3_RTS MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0) +#define MX28_PAD_PWM0__PWM_0 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0) +#define MX28_PAD_PWM1__PWM_1 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0) +#define MX28_PAD_PWM2__PWM_2 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0) +#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0) +#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0) +#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_0) +#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_0) +#define MX28_PAD_I2C0_SCL__I2C0_SCL MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_0) +#define MX28_PAD_I2C0_SDA__I2C0_SDA MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_0) +#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_0) +#define MX28_PAD_SPDIF__SPDIF_TX MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_0) +#define MX28_PAD_PWM3__PWM_3 MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_0) +#define MX28_PAD_PWM4__PWM_4 MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_0) +#define MX28_PAD_LCD_RESET__LCD_RESET MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_0) + +#define MX28_PAD_ENET0_MDC__ENET0_MDC MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_MDIO__ENET0_MDIO MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_RXD0__ENET0_RXD0 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_RXD1__ENET0_RXD1 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_TXD0__ENET0_TXD0 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_TXD1__ENET0_TXD1 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_RXD2__ENET0_RXD2 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_RXD3__ENET0_RXD3 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_TXD2__ENET0_TXD2 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_TXD3__ENET0_TXD3 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_COL__ENET0_COL MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_CRS__ENET0_CRS MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_0) +#define MX28_PAD_ENET_CLK__CLKCTRL_ENET MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_0) +#define MX28_PAD_JTAG_RTCK__JTAG_RTCK MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_0) + +#define MX28_PAD_EMI_D00__EMI_DATA0 MXS_IOMUX_PAD_NAKED(5, 0, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D01__EMI_DATA1 MXS_IOMUX_PAD_NAKED(5, 1, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D02__EMI_DATA2 MXS_IOMUX_PAD_NAKED(5, 2, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D03__EMI_DATA3 MXS_IOMUX_PAD_NAKED(5, 3, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D04__EMI_DATA4 MXS_IOMUX_PAD_NAKED(5, 4, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D05__EMI_DATA5 MXS_IOMUX_PAD_NAKED(5, 5, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D06__EMI_DATA6 MXS_IOMUX_PAD_NAKED(5, 6, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D07__EMI_DATA7 MXS_IOMUX_PAD_NAKED(5, 7, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D08__EMI_DATA8 MXS_IOMUX_PAD_NAKED(5, 8, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D09__EMI_DATA9 MXS_IOMUX_PAD_NAKED(5, 9, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D10__EMI_DATA10 MXS_IOMUX_PAD_NAKED(5, 10, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D11__EMI_DATA11 MXS_IOMUX_PAD_NAKED(5, 11, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D12__EMI_DATA12 MXS_IOMUX_PAD_NAKED(5, 12, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D13__EMI_DATA13 MXS_IOMUX_PAD_NAKED(5, 13, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D14__EMI_DATA14 MXS_IOMUX_PAD_NAKED(5, 14, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D15__EMI_DATA15 MXS_IOMUX_PAD_NAKED(5, 15, PAD_MUXSEL_0) +#define MX28_PAD_EMI_ODT0__EMI_ODT0 MXS_IOMUX_PAD_NAKED(5, 16, PAD_MUXSEL_0) +#define MX28_PAD_EMI_DQM0__EMI_DQM0 MXS_IOMUX_PAD_NAKED(5, 17, PAD_MUXSEL_0) +#define MX28_PAD_EMI_ODT1__EMI_ODT1 MXS_IOMUX_PAD_NAKED(5, 18, PAD_MUXSEL_0) +#define MX28_PAD_EMI_DQM1__EMI_DQM1 MXS_IOMUX_PAD_NAKED(5, 19, PAD_MUXSEL_0) +#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK MXS_IOMUX_PAD_NAKED(5, 20, PAD_MUXSEL_0) +#define MX28_PAD_EMI_CLK__EMI_CLK MXS_IOMUX_PAD_NAKED(5, 21, PAD_MUXSEL_0) +#define MX28_PAD_EMI_DQS0__EMI_DQS0 MXS_IOMUX_PAD_NAKED(5, 22, PAD_MUXSEL_0) +#define MX28_PAD_EMI_DQS1__EMI_DQS1 MXS_IOMUX_PAD_NAKED(5, 23, PAD_MUXSEL_0) +#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN MXS_IOMUX_PAD_NAKED(5, 26, PAD_MUXSEL_0) + +#define MX28_PAD_EMI_A00__EMI_ADDR0 MXS_IOMUX_PAD_NAKED(6, 0, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A01__EMI_ADDR1 MXS_IOMUX_PAD_NAKED(6, 1, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A02__EMI_ADDR2 MXS_IOMUX_PAD_NAKED(6, 2, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A03__EMI_ADDR3 MXS_IOMUX_PAD_NAKED(6, 3, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A04__EMI_ADDR4 MXS_IOMUX_PAD_NAKED(6, 4, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A05__EMI_ADDR5 MXS_IOMUX_PAD_NAKED(6, 5, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A06__EMI_ADDR6 MXS_IOMUX_PAD_NAKED(6, 6, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A07__EMI_ADDR7 MXS_IOMUX_PAD_NAKED(6, 7, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A08__EMI_ADDR8 MXS_IOMUX_PAD_NAKED(6, 8, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A09__EMI_ADDR9 MXS_IOMUX_PAD_NAKED(6, 9, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A10__EMI_ADDR10 MXS_IOMUX_PAD_NAKED(6, 10, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A11__EMI_ADDR11 MXS_IOMUX_PAD_NAKED(6, 11, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A12__EMI_ADDR12 MXS_IOMUX_PAD_NAKED(6, 12, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A13__EMI_ADDR13 MXS_IOMUX_PAD_NAKED(6, 13, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A14__EMI_ADDR14 MXS_IOMUX_PAD_NAKED(6, 14, PAD_MUXSEL_0) +#define MX28_PAD_EMI_BA0__EMI_BA0 MXS_IOMUX_PAD_NAKED(6, 16, PAD_MUXSEL_0) +#define MX28_PAD_EMI_BA1__EMI_BA1 MXS_IOMUX_PAD_NAKED(6, 17, PAD_MUXSEL_0) +#define MX28_PAD_EMI_BA2__EMI_BA2 MXS_IOMUX_PAD_NAKED(6, 18, PAD_MUXSEL_0) +#define MX28_PAD_EMI_CASN__EMI_CASN MXS_IOMUX_PAD_NAKED(6, 19, PAD_MUXSEL_0) +#define MX28_PAD_EMI_RASN__EMI_RASN MXS_IOMUX_PAD_NAKED(6, 20, PAD_MUXSEL_0) +#define MX28_PAD_EMI_WEN__EMI_WEN MXS_IOMUX_PAD_NAKED(6, 21, PAD_MUXSEL_0) +#define MX28_PAD_EMI_CE0N__EMI_CE0N MXS_IOMUX_PAD_NAKED(6, 22, PAD_MUXSEL_0) +#define MX28_PAD_EMI_CE1N__EMI_CE1N MXS_IOMUX_PAD_NAKED(6, 23, PAD_MUXSEL_0) +#define MX28_PAD_EMI_CKE__EMI_CKE MXS_IOMUX_PAD_NAKED(6, 24, PAD_MUXSEL_0) + +/* MUXSEL_1 */ +#define MX28_PAD_GPMI_D00__SSP1_D0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D01__SSP1_D1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D02__SSP1_D2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D03__SSP1_D3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D04__SSP1_D4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D05__SSP1_D5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D06__SSP1_D6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D07__SSP1_D7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_CE0N__SSP3_D0 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_CE1N__SSP3_D3 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_CE2N__CAN1_TX MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_CE3N__CAN1_RX MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_RDY1__SSP1_CMD MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_RDY2__CAN0_TX MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_RDY3__CAN0_RX MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_RDN__SSP3_SCK MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_WRN__SSP1_SCK MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_ALE__SSP3_D1 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_CLE__SSP3_D2 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_RESETN__SSP3_CMD MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1) + +#define MX28_PAD_LCD_D03__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D04__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D08__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D09__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1) +#define MX28_PAD_LCD_RD_E__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1) +#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1) +#define MX28_PAD_LCD_RS__LCD_DOTCLK MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1) +#define MX28_PAD_LCD_CS__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1) +#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1) +#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1) +#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1) + +#define MX28_PAD_SSP0_DATA4__SSP2_D0 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_1) +#define MX28_PAD_SSP0_DATA5__SSP2_D3 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_1) +#define MX28_PAD_SSP0_DATA6__SSP2_CMD MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_1) +#define MX28_PAD_SSP0_DATA7__SSP2_SCK MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_1) +#define MX28_PAD_SSP1_SCK__SSP2_D1 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_1) +#define MX28_PAD_SSP1_CMD__SSP2_D2 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_1) +#define MX28_PAD_SSP1_DATA0__SSP2_D6 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_1) +#define MX28_PAD_SSP1_DATA3__SSP2_D7 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_1) +#define MX28_PAD_SSP2_SCK__AUART2_RX MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_1) +#define MX28_PAD_SSP2_MOSI__AUART2_TX MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_1) +#define MX28_PAD_SSP2_MISO__AUART3_RX MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_1) +#define MX28_PAD_SSP2_SS0__AUART3_TX MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_1) +#define MX28_PAD_SSP2_SS1__SSP2_D1 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_1) +#define MX28_PAD_SSP2_SS2__SSP2_D2 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_1) +#define MX28_PAD_SSP3_SCK__AUART4_TX MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_1) +#define MX28_PAD_SSP3_MOSI__AUART4_RX MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_1) +#define MX28_PAD_SSP3_MISO__AUART4_RTS MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_1) +#define MX28_PAD_SSP3_SS0__AUART4_CTS MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_1) + +#define MX28_PAD_AUART0_RX__I2C0_SCL MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_1) +#define MX28_PAD_AUART0_TX__I2C0_SDA MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_1) +#define MX28_PAD_AUART0_CTS__AUART4_RX MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_1) +#define MX28_PAD_AUART0_RTS__AUART4_TX MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_1) +#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_1) +#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_1) +#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_1) +#define MX28_PAD_AUART1_RTS__USB0_ID MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_1) +#define MX28_PAD_AUART2_RX__SSP3_D1 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_1) +#define MX28_PAD_AUART2_TX__SSP3_D2 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_1) +#define MX28_PAD_AUART2_CTS__I2C1_SCL MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_1) +#define MX28_PAD_AUART2_RTS__I2C1_SDA MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_1) +#define MX28_PAD_AUART3_RX__CAN0_TX MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_1) +#define MX28_PAD_AUART3_TX__CAN0_RX MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_1) +#define MX28_PAD_AUART3_CTS__CAN1_TX MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_1) +#define MX28_PAD_AUART3_RTS__CAN1_RX MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_1) +#define MX28_PAD_PWM0__I2C1_SCL MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_1) +#define MX28_PAD_PWM1__I2C1_SDA MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_1) +#define MX28_PAD_PWM2__USB0_ID MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_1) +#define MX28_PAD_SAIF0_MCLK__PWM_3 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_1) +#define MX28_PAD_SAIF0_LRCLK__PWM_4 MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_1) +#define MX28_PAD_SAIF0_BITCLK__PWM_5 MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_1) +#define MX28_PAD_SAIF0_SDATA0__PWM_6 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_1) +#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_1) +#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_1) +#define MX28_PAD_SAIF1_SDATA0__PWM_7 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_1) +#define MX28_PAD_LCD_RESET__LCD_VSYNC MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_1) + +#define MX28_PAD_ENET0_MDC__GPMI_CE4N MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_MDIO__GPMI_CE5N MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_RXD0__GPMI_CE7N MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_RXD1__GPMI_READY4 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_TX_EN__GPMI_READY5 MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_TXD0__GPMI_READY6 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_TXD1__GPMI_READY7 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_RXD2__ENET1_RXD0 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_RXD3__ENET1_RXD1 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_TXD2__ENET1_TXD0 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_TXD3__ENET1_TXD1 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_COL__ENET1_TX_EN MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_CRS__ENET1_RX_EN MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_1) + +/* MUXSEL_2 */ +#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_2) +#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2) +#define MX28_PAD_GPMI_RDY0__USB0_ID MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2) +#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_2) +#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_2) +#define MX28_PAD_GPMI_ALE__SSP3_D4 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2) +#define MX28_PAD_GPMI_CLE__SSP3_D5 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2) + +#define MX28_PAD_LCD_D00__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D01__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D02__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D03__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D04__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D05__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D06__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D07__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D08__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D09__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D10__ETM_DA10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D11__ETM_DA11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D12__ETM_DA12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D13__ETM_DA13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D14__ETM_DA14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D15__ETM_DA15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D16__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D17__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D18__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D19__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D20__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D21__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D22__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D23__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_2) +#define MX28_PAD_LCD_RD_E__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_2) +#define MX28_PAD_LCD_WR_RWN__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_2) +#define MX28_PAD_LCD_HSYNC__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2) +#define MX28_PAD_LCD_DOTCLK__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2) + +#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_2) +#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_2) +#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_2) +#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_2) +#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_2) +#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_2) +#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_2) +#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_2) +#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_2) +#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_2) +#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_2) +#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_2) +#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_2) +#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_2) + +#define MX28_PAD_AUART0_RX__DUART_CTS MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_2) +#define MX28_PAD_AUART0_TX__DUART_RTS MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_2) +#define MX28_PAD_AUART0_CTS__DUART_RX MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_2) +#define MX28_PAD_AUART0_RTS__DUART_TX MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_2) +#define MX28_PAD_AUART1_RX__PWM_0 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_2) +#define MX28_PAD_AUART1_TX__PWM_1 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_2) +#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_2) +#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_2) +#define MX28_PAD_AUART2_RX__SSP3_D4 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_2) +#define MX28_PAD_AUART2_TX__SSP3_D5 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_2) +#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_2) +#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_2) +#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_2) +#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_2) +#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_2) +#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_2) +#define MX28_PAD_PWM0__DUART_RX MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_2) +#define MX28_PAD_PWM1__DUART_TX MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_2) +#define MX28_PAD_PWM2__USB1_OVERCURRENT MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_2) +#define MX28_PAD_SAIF0_MCLK__AUART4_CTS MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_2) +#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_2) +#define MX28_PAD_SAIF0_BITCLK__AUART4_RX MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_2) +#define MX28_PAD_SAIF0_SDATA0__AUART4_TX MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_2) +#define MX28_PAD_I2C0_SCL__DUART_RX MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_2) +#define MX28_PAD_I2C0_SDA__DUART_TX MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_2) +#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_2) +#define MX28_PAD_SPDIF__ENET1_RX_ER MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_2) + +#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2 MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_2) + +/* MUXSEL_GPIO */ +#define MX28_PAD_GPMI_D00__GPIO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D01__GPIO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D02__GPIO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D03__GPIO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D04__GPIO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D05__GPIO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D06__GPIO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D07__GPIO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_CE0N__GPIO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_CE1N__GPIO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_CE2N__GPIO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_CE3N__GPIO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_RDY0__GPIO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_RDY1__GPIO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_RDY2__GPIO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_RDY3__GPIO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_RDN__GPIO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_WRN__GPIO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_ALE__GPIO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_CLE__GPIO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_RESETN__GPIO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO) + +#define MX28_PAD_LCD_D00__GPIO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D01__GPIO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D02__GPIO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D03__GPIO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D04__GPIO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D05__GPIO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D06__GPIO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D07__GPIO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D08__GPIO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D09__GPIO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D10__GPIO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D11__GPIO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D12__GPIO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D13__GPIO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D14__GPIO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D15__GPIO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D16__GPIO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D17__GPIO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D18__GPIO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D19__GPIO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D20__GPIO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D21__GPIO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D22__GPIO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D23__GPIO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_RD_E__GPIO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_WR_RWN__GPIO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_RS__GPIO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_CS__GPIO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_VSYNC__GPIO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_HSYNC__GPIO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_DOTCLK__GPIO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_ENABLE__GPIO_1_31 MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_GPIO) + +#define MX28_PAD_SSP0_DATA0__GPIO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA1__GPIO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA2__GPIO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA3__GPIO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA4__GPIO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA5__GPIO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA6__GPIO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA7__GPIO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_CMD__GPIO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DETECT__GPIO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_SCK__GPIO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP1_SCK__GPIO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP1_CMD__GPIO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP1_DATA0__GPIO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP1_DATA3__GPIO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP2_SCK__GPIO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP2_MOSI__GPIO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP2_MISO__GPIO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP2_SS0__GPIO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP2_SS1__GPIO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP2_SS2__GPIO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP3_SCK__GPIO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP3_MOSI__GPIO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP3_MISO__GPIO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP3_SS0__GPIO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO) + +#define MX28_PAD_AUART0_RX__GPIO_3_0 MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART0_TX__GPIO_3_1 MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART0_CTS__GPIO_3_2 MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART0_RTS__GPIO_3_3 MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART1_RX__GPIO_3_4 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART1_TX__GPIO_3_5 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART1_CTS__GPIO_3_6 MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART1_RTS__GPIO_3_7 MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART2_RX__GPIO_3_8 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART2_TX__GPIO_3_9 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART2_CTS__GPIO_3_10 MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART2_RTS__GPIO_3_11 MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART3_RX__GPIO_3_12 MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART3_TX__GPIO_3_13 MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART3_CTS__GPIO_3_14 MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART3_RTS__GPIO_3_15 MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_GPIO) +#define MX28_PAD_PWM0__GPIO_3_16 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_GPIO) +#define MX28_PAD_PWM1__GPIO_3_17 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_GPIO) +#define MX28_PAD_PWM2__GPIO_3_18 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_GPIO) +#define MX28_PAD_SAIF0_MCLK__GPIO_3_20 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_GPIO) +#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21 MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_GPIO) +#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22 MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_GPIO) +#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_GPIO) +#define MX28_PAD_I2C0_SCL__GPIO_3_24 MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_GPIO) +#define MX28_PAD_I2C0_SDA__GPIO_3_25 MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_GPIO) +#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_GPIO) +#define MX28_PAD_SPDIF__GPIO_3_27 MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_GPIO) +#define MX28_PAD_PWM3__GPIO_3_28 MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_GPIO) +#define MX28_PAD_PWM4__GPIO_3_29 MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_RESET__GPIO_3_30 MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_GPIO) + +#define MX28_PAD_ENET0_MDC__GPIO_4_0 MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_MDIO__GPIO_4_1 MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_RX_EN__GPIO_4_2 MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_RXD0__GPIO_4_3 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_RXD1__GPIO_4_4 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5 MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_TX_EN__GPIO_4_6 MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_TXD0__GPIO_4_7 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_TXD1__GPIO_4_8 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_RXD2__GPIO_4_9 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_RXD3__GPIO_4_10 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_TXD2__GPIO_4_11 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_TXD3__GPIO_4_12 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13 MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_COL__GPIO_4_14 MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_CRS__GPIO_4_15 MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET_CLK__GPIO_4_16 MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_GPIO) +#define MX28_PAD_JTAG_RTCK__GPIO_4_20 MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_GPIO) + +#endif /* __MACH_IOMUX_MX28_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/iomux.h b/arch/arm/include/asm/arch-mx28/iomux.h new file mode 100644 index 000000000..7abdf58b8 --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/iomux.h @@ -0,0 +1,168 @@ +/* + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, + * <armlinux@phytec.de> + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_MXS_IOMUX_H__ +#define __MACH_MXS_IOMUX_H__ + +/* + * IOMUX/PAD Bit field definitions + * + * PAD_BANK: 0..2 (3) + * PAD_PIN: 3..7 (5) + * PAD_MUXSEL: 8..9 (2) + * PAD_MA: 10..11 (2) + * PAD_MA_VALID: 12 (1) + * PAD_VOL: 13 (1) + * PAD_VOL_VALID: 14 (1) + * PAD_PULL: 15 (1) + * PAD_PULL_VALID: 16 (1) + * RESERVED: 17..31 (15) + */ +typedef u32 iomux_cfg_t; + +#define MXS_PAD_BANK_SHIFT 0 +#define MXS_PAD_BANK_MASK ((iomux_cfg_t)0x7 << MXS_PAD_BANK_SHIFT) +#define MXS_PAD_PIN_SHIFT 3 +#define MXS_PAD_PIN_MASK ((iomux_cfg_t)0x1f << MXS_PAD_PIN_SHIFT) +#define MXS_PAD_MUXSEL_SHIFT 8 +#define MXS_PAD_MUXSEL_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MUXSEL_SHIFT) +#define MXS_PAD_MA_SHIFT 10 +#define MXS_PAD_MA_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MA_SHIFT) +#define MXS_PAD_MA_VALID_SHIFT 12 +#define MXS_PAD_MA_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_MA_VALID_SHIFT) +#define MXS_PAD_VOL_SHIFT 13 +#define MXS_PAD_VOL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_SHIFT) +#define MXS_PAD_VOL_VALID_SHIFT 14 +#define MXS_PAD_VOL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_VALID_SHIFT) +#define MXS_PAD_PULL_SHIFT 15 +#define MXS_PAD_PULL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_SHIFT) +#define MXS_PAD_PULL_VALID_SHIFT 16 +#define MXS_PAD_PULL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_VALID_SHIFT) + +#define PAD_MUXSEL_0 0 +#define PAD_MUXSEL_1 1 +#define PAD_MUXSEL_2 2 +#define PAD_MUXSEL_GPIO 3 + +#define PAD_4MA 0 +#define PAD_8MA 1 +#define PAD_12MA 2 +#define PAD_16MA 3 + +#define PAD_1V8 0 +#define PAD_3V3 1 + +#define PAD_NOPULL 0 +#define PAD_PULLUP 1 + +#define MXS_PAD_4MA ((PAD_4MA << MXS_PAD_MA_SHIFT) | \ + MXS_PAD_MA_VALID_MASK) +#define MXS_PAD_8MA ((PAD_8MA << MXS_PAD_MA_SHIFT) | \ + MXS_PAD_MA_VALID_MASK) +#define MXS_PAD_12MA ((PAD_12MA << MXS_PAD_MA_SHIFT) | \ + MXS_PAD_MA_VALID_MASK) +#define MXS_PAD_16MA ((PAD_16MA << MXS_PAD_MA_SHIFT) | \ + MXS_PAD_MA_VALID_MASK) + +#define MXS_PAD_1V8 ((PAD_1V8 << MXS_PAD_VOL_SHIFT) | \ + MXS_PAD_VOL_VALID_MASK) +#define MXS_PAD_3V3 ((PAD_3V3 << MXS_PAD_VOL_SHIFT) | \ + MXS_PAD_VOL_VALID_MASK) + +#define MXS_PAD_NOPULL ((PAD_NOPULL << MXS_PAD_PULL_SHIFT) | \ + MXS_PAD_PULL_VALID_MASK) +#define MXS_PAD_PULLUP ((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \ + MXS_PAD_PULL_VALID_MASK) + +/* generic pad control used in most cases */ +#define MXS_PAD_CTRL (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL) + +#define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull) \ + (((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) | \ + ((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) | \ + ((iomux_cfg_t)(_muxsel) << MXS_PAD_MUXSEL_SHIFT) | \ + ((iomux_cfg_t)(_ma) << MXS_PAD_MA_SHIFT) | \ + ((iomux_cfg_t)(_vol) << MXS_PAD_VOL_SHIFT) | \ + ((iomux_cfg_t)(_pull) << MXS_PAD_PULL_SHIFT)) + +/* + * A pad becomes naked, when none of mA, vol or pull + * validity bits is set. + */ +#define MXS_IOMUX_PAD_NAKED(_bank, _pin, _muxsel) \ + MXS_IOMUX_PAD(_bank, _pin, _muxsel, 0, 0, 0) + +static inline unsigned int PAD_BANK(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_BANK_MASK) >> MXS_PAD_BANK_SHIFT; +} + +static inline unsigned int PAD_PIN(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_PIN_MASK) >> MXS_PAD_PIN_SHIFT; +} + +static inline unsigned int PAD_MUXSEL(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_MUXSEL_MASK) >> MXS_PAD_MUXSEL_SHIFT; +} + +static inline unsigned int PAD_MA(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_MA_MASK) >> MXS_PAD_MA_SHIFT; +} + +static inline unsigned int PAD_MA_VALID(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_MA_VALID_MASK) >> MXS_PAD_MA_VALID_SHIFT; +} + +static inline unsigned int PAD_VOL(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_VOL_MASK) >> MXS_PAD_VOL_SHIFT; +} + +static inline unsigned int PAD_VOL_VALID(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_VOL_VALID_MASK) >> MXS_PAD_VOL_VALID_SHIFT; +} + +static inline unsigned int PAD_PULL(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_PULL_MASK) >> MXS_PAD_PULL_SHIFT; +} + +static inline unsigned int PAD_PULL_VALID(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_PULL_VALID_MASK) >> MXS_PAD_PULL_VALID_SHIFT; +} + +/* + * configures a single pad in the iomuxer + */ +int mxs_iomux_setup_pad(iomux_cfg_t pad); + +/* + * configures multiple pads + * convenient way to call the above function with tables + */ +int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count); + +#endif /* __MACH_MXS_IOMUX_H__*/ diff --git a/arch/arm/include/asm/arch-mx28/regs-apbh.h b/arch/arm/include/asm/arch-mx28/regs-apbh.h new file mode 100644 index 000000000..a7fa1ec1c --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/regs-apbh.h @@ -0,0 +1,466 @@ +/* + * Freescale i.MX28 APBH Register Definitions + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __REGS_APBH_H__ +#define __REGS_APBH_H__ + +#include <asm/arch/regs-common.h> + +#ifndef __ASSEMBLY__ +struct mx28_apbh_regs { + mx28_reg(hw_apbh_ctrl0) + mx28_reg(hw_apbh_ctrl1) + mx28_reg(hw_apbh_ctrl2) + mx28_reg(hw_apbh_channel_ctrl) + mx28_reg(hw_apbh_devsel) + mx28_reg(hw_apbh_dma_burst_size) + mx28_reg(hw_apbh_debug) + + uint32_t reserved[36]; + + union { + struct { + mx28_reg(hw_apbh_ch_curcmdar) + mx28_reg(hw_apbh_ch_nxtcmdar) + mx28_reg(hw_apbh_ch_cmd) + mx28_reg(hw_apbh_ch_bar) + mx28_reg(hw_apbh_ch_sema) + mx28_reg(hw_apbh_ch_debug1) + mx28_reg(hw_apbh_ch_debug2) + } ch[16]; + struct { + mx28_reg(hw_apbh_ch0_curcmdar) + mx28_reg(hw_apbh_ch0_nxtcmdar) + mx28_reg(hw_apbh_ch0_cmd) + mx28_reg(hw_apbh_ch0_bar) + mx28_reg(hw_apbh_ch0_sema) + mx28_reg(hw_apbh_ch0_debug1) + mx28_reg(hw_apbh_ch0_debug2) + mx28_reg(hw_apbh_ch1_curcmdar) + mx28_reg(hw_apbh_ch1_nxtcmdar) + mx28_reg(hw_apbh_ch1_cmd) + mx28_reg(hw_apbh_ch1_bar) + mx28_reg(hw_apbh_ch1_sema) + mx28_reg(hw_apbh_ch1_debug1) + mx28_reg(hw_apbh_ch1_debug2) + mx28_reg(hw_apbh_ch2_curcmdar) + mx28_reg(hw_apbh_ch2_nxtcmdar) + mx28_reg(hw_apbh_ch2_cmd) + mx28_reg(hw_apbh_ch2_bar) + mx28_reg(hw_apbh_ch2_sema) + mx28_reg(hw_apbh_ch2_debug1) + mx28_reg(hw_apbh_ch2_debug2) + mx28_reg(hw_apbh_ch3_curcmdar) + mx28_reg(hw_apbh_ch3_nxtcmdar) + mx28_reg(hw_apbh_ch3_cmd) + mx28_reg(hw_apbh_ch3_bar) + mx28_reg(hw_apbh_ch3_sema) + mx28_reg(hw_apbh_ch3_debug1) + mx28_reg(hw_apbh_ch3_debug2) + mx28_reg(hw_apbh_ch4_curcmdar) + mx28_reg(hw_apbh_ch4_nxtcmdar) + mx28_reg(hw_apbh_ch4_cmd) + mx28_reg(hw_apbh_ch4_bar) + mx28_reg(hw_apbh_ch4_sema) + mx28_reg(hw_apbh_ch4_debug1) + mx28_reg(hw_apbh_ch4_debug2) + mx28_reg(hw_apbh_ch5_curcmdar) + mx28_reg(hw_apbh_ch5_nxtcmdar) + mx28_reg(hw_apbh_ch5_cmd) + mx28_reg(hw_apbh_ch5_bar) + mx28_reg(hw_apbh_ch5_sema) + mx28_reg(hw_apbh_ch5_debug1) + mx28_reg(hw_apbh_ch5_debug2) + mx28_reg(hw_apbh_ch6_curcmdar) + mx28_reg(hw_apbh_ch6_nxtcmdar) + mx28_reg(hw_apbh_ch6_cmd) + mx28_reg(hw_apbh_ch6_bar) + mx28_reg(hw_apbh_ch6_sema) + mx28_reg(hw_apbh_ch6_debug1) + mx28_reg(hw_apbh_ch6_debug2) + mx28_reg(hw_apbh_ch7_curcmdar) + mx28_reg(hw_apbh_ch7_nxtcmdar) + mx28_reg(hw_apbh_ch7_cmd) + mx28_reg(hw_apbh_ch7_bar) + mx28_reg(hw_apbh_ch7_sema) + mx28_reg(hw_apbh_ch7_debug1) + mx28_reg(hw_apbh_ch7_debug2) + mx28_reg(hw_apbh_ch8_curcmdar) + mx28_reg(hw_apbh_ch8_nxtcmdar) + mx28_reg(hw_apbh_ch8_cmd) + mx28_reg(hw_apbh_ch8_bar) + mx28_reg(hw_apbh_ch8_sema) + mx28_reg(hw_apbh_ch8_debug1) + mx28_reg(hw_apbh_ch8_debug2) + mx28_reg(hw_apbh_ch9_curcmdar) + mx28_reg(hw_apbh_ch9_nxtcmdar) + mx28_reg(hw_apbh_ch9_cmd) + mx28_reg(hw_apbh_ch9_bar) + mx28_reg(hw_apbh_ch9_sema) + mx28_reg(hw_apbh_ch9_debug1) + mx28_reg(hw_apbh_ch9_debug2) + mx28_reg(hw_apbh_ch10_curcmdar) + mx28_reg(hw_apbh_ch10_nxtcmdar) + mx28_reg(hw_apbh_ch10_cmd) + mx28_reg(hw_apbh_ch10_bar) + mx28_reg(hw_apbh_ch10_sema) + mx28_reg(hw_apbh_ch10_debug1) + mx28_reg(hw_apbh_ch10_debug2) + mx28_reg(hw_apbh_ch11_curcmdar) + mx28_reg(hw_apbh_ch11_nxtcmdar) + mx28_reg(hw_apbh_ch11_cmd) + mx28_reg(hw_apbh_ch11_bar) + mx28_reg(hw_apbh_ch11_sema) + mx28_reg(hw_apbh_ch11_debug1) + mx28_reg(hw_apbh_ch11_debug2) + mx28_reg(hw_apbh_ch12_curcmdar) + mx28_reg(hw_apbh_ch12_nxtcmdar) + mx28_reg(hw_apbh_ch12_cmd) + mx28_reg(hw_apbh_ch12_bar) + mx28_reg(hw_apbh_ch12_sema) + mx28_reg(hw_apbh_ch12_debug1) + mx28_reg(hw_apbh_ch12_debug2) + mx28_reg(hw_apbh_ch13_curcmdar) + mx28_reg(hw_apbh_ch13_nxtcmdar) + mx28_reg(hw_apbh_ch13_cmd) + mx28_reg(hw_apbh_ch13_bar) + mx28_reg(hw_apbh_ch13_sema) + mx28_reg(hw_apbh_ch13_debug1) + mx28_reg(hw_apbh_ch13_debug2) + mx28_reg(hw_apbh_ch14_curcmdar) + mx28_reg(hw_apbh_ch14_nxtcmdar) + mx28_reg(hw_apbh_ch14_cmd) + mx28_reg(hw_apbh_ch14_bar) + mx28_reg(hw_apbh_ch14_sema) + mx28_reg(hw_apbh_ch14_debug1) + mx28_reg(hw_apbh_ch14_debug2) + mx28_reg(hw_apbh_ch15_curcmdar) + mx28_reg(hw_apbh_ch15_nxtcmdar) + mx28_reg(hw_apbh_ch15_cmd) + mx28_reg(hw_apbh_ch15_bar) + mx28_reg(hw_apbh_ch15_sema) + mx28_reg(hw_apbh_ch15_debug1) + mx28_reg(hw_apbh_ch15_debug2) + }; + }; + mx28_reg(hw_apbh_version) +}; +#endif + +#define APBH_CTRL0_SFTRST (1 << 31) +#define APBH_CTRL0_CLKGATE (1 << 30) +#define APBH_CTRL0_AHB_BURST8_EN (1 << 29) +#define APBH_CTRL0_APB_BURST_EN (1 << 28) +#define APBH_CTRL0_RSVD0_MASK (0xfff << 16) +#define APBH_CTRL0_RSVD0_OFFSET 16 +#define APBH_CTRL0_CLKGATE_CHANNEL_MASK 0xffff +#define APBH_CTRL0_CLKGATE_CHANNEL_OFFSET 0 +#define APBH_CTRL0_CLKGATE_CHANNEL_SSP0 0x0001 +#define APBH_CTRL0_CLKGATE_CHANNEL_SSP1 0x0002 +#define APBH_CTRL0_CLKGATE_CHANNEL_SSP2 0x0004 +#define APBH_CTRL0_CLKGATE_CHANNEL_SSP3 0x0008 +#define APBH_CTRL0_CLKGATE_CHANNEL_NAND0 0x0010 +#define APBH_CTRL0_CLKGATE_CHANNEL_NAND1 0x0020 +#define APBH_CTRL0_CLKGATE_CHANNEL_NAND2 0x0040 +#define APBH_CTRL0_CLKGATE_CHANNEL_NAND3 0x0080 +#define APBH_CTRL0_CLKGATE_CHANNEL_NAND4 0x0100 +#define APBH_CTRL0_CLKGATE_CHANNEL_NAND5 0x0200 +#define APBH_CTRL0_CLKGATE_CHANNEL_NAND6 0x0400 +#define APBH_CTRL0_CLKGATE_CHANNEL_NAND7 0x0800 +#define APBH_CTRL0_CLKGATE_CHANNEL_HSADC 0x1000 +#define APBH_CTRL0_CLKGATE_CHANNEL_LCDIF 0x2000 + +#define APBH_CTRL1_CH15_CMDCMPLT_IRQ_EN (1 << 31) +#define APBH_CTRL1_CH14_CMDCMPLT_IRQ_EN (1 << 30) +#define APBH_CTRL1_CH13_CMDCMPLT_IRQ_EN (1 << 29) +#define APBH_CTRL1_CH12_CMDCMPLT_IRQ_EN (1 << 28) +#define APBH_CTRL1_CH11_CMDCMPLT_IRQ_EN (1 << 27) +#define APBH_CTRL1_CH10_CMDCMPLT_IRQ_EN (1 << 26) +#define APBH_CTRL1_CH9_CMDCMPLT_IRQ_EN (1 << 25) +#define APBH_CTRL1_CH8_CMDCMPLT_IRQ_EN (1 << 24) +#define APBH_CTRL1_CH7_CMDCMPLT_IRQ_EN (1 << 23) +#define APBH_CTRL1_CH6_CMDCMPLT_IRQ_EN (1 << 22) +#define APBH_CTRL1_CH5_CMDCMPLT_IRQ_EN (1 << 21) +#define APBH_CTRL1_CH4_CMDCMPLT_IRQ_EN (1 << 20) +#define APBH_CTRL1_CH3_CMDCMPLT_IRQ_EN (1 << 19) +#define APBH_CTRL1_CH2_CMDCMPLT_IRQ_EN (1 << 18) +#define APBH_CTRL1_CH1_CMDCMPLT_IRQ_EN (1 << 17) +#define APBH_CTRL1_CH0_CMDCMPLT_IRQ_EN (1 << 16) +#define APBH_CTRL1_CH_CMDCMPLT_IRQ_EN_OFFSET 16 +#define APBH_CTRL1_CH_CMDCMPLT_IRQ_EN_MASK (0xffff << 16) +#define APBH_CTRL1_CH15_CMDCMPLT_IRQ (1 << 15) +#define APBH_CTRL1_CH14_CMDCMPLT_IRQ (1 << 14) +#define APBH_CTRL1_CH13_CMDCMPLT_IRQ (1 << 13) +#define APBH_CTRL1_CH12_CMDCMPLT_IRQ (1 << 12) +#define APBH_CTRL1_CH11_CMDCMPLT_IRQ (1 << 11) +#define APBH_CTRL1_CH10_CMDCMPLT_IRQ (1 << 10) +#define APBH_CTRL1_CH9_CMDCMPLT_IRQ (1 << 9) +#define APBH_CTRL1_CH8_CMDCMPLT_IRQ (1 << 8) +#define APBH_CTRL1_CH7_CMDCMPLT_IRQ (1 << 7) +#define APBH_CTRL1_CH6_CMDCMPLT_IRQ (1 << 6) +#define APBH_CTRL1_CH5_CMDCMPLT_IRQ (1 << 5) +#define APBH_CTRL1_CH4_CMDCMPLT_IRQ (1 << 4) +#define APBH_CTRL1_CH3_CMDCMPLT_IRQ (1 << 3) +#define APBH_CTRL1_CH2_CMDCMPLT_IRQ (1 << 2) +#define APBH_CTRL1_CH1_CMDCMPLT_IRQ (1 << 1) +#define APBH_CTRL1_CH0_CMDCMPLT_IRQ (1 << 0) + +#define APBH_CTRL2_CH15_ERROR_STATUS (1 << 31) +#define APBH_CTRL2_CH14_ERROR_STATUS (1 << 30) +#define APBH_CTRL2_CH13_ERROR_STATUS (1 << 29) +#define APBH_CTRL2_CH12_ERROR_STATUS (1 << 28) +#define APBH_CTRL2_CH11_ERROR_STATUS (1 << 27) +#define APBH_CTRL2_CH10_ERROR_STATUS (1 << 26) +#define APBH_CTRL2_CH9_ERROR_STATUS (1 << 25) +#define APBH_CTRL2_CH8_ERROR_STATUS (1 << 24) +#define APBH_CTRL2_CH7_ERROR_STATUS (1 << 23) +#define APBH_CTRL2_CH6_ERROR_STATUS (1 << 22) +#define APBH_CTRL2_CH5_ERROR_STATUS (1 << 21) +#define APBH_CTRL2_CH4_ERROR_STATUS (1 << 20) +#define APBH_CTRL2_CH3_ERROR_STATUS (1 << 19) +#define APBH_CTRL2_CH2_ERROR_STATUS (1 << 18) +#define APBH_CTRL2_CH1_ERROR_STATUS (1 << 17) +#define APBH_CTRL2_CH0_ERROR_STATUS (1 << 16) +#define APBH_CTRL2_CH15_ERROR_IRQ (1 << 15) +#define APBH_CTRL2_CH14_ERROR_IRQ (1 << 14) +#define APBH_CTRL2_CH13_ERROR_IRQ (1 << 13) +#define APBH_CTRL2_CH12_ERROR_IRQ (1 << 12) +#define APBH_CTRL2_CH11_ERROR_IRQ (1 << 11) +#define APBH_CTRL2_CH10_ERROR_IRQ (1 << 10) +#define APBH_CTRL2_CH9_ERROR_IRQ (1 << 9) +#define APBH_CTRL2_CH8_ERROR_IRQ (1 << 8) +#define APBH_CTRL2_CH7_ERROR_IRQ (1 << 7) +#define APBH_CTRL2_CH6_ERROR_IRQ (1 << 6) +#define APBH_CTRL2_CH5_ERROR_IRQ (1 << 5) +#define APBH_CTRL2_CH4_ERROR_IRQ (1 << 4) +#define APBH_CTRL2_CH3_ERROR_IRQ (1 << 3) +#define APBH_CTRL2_CH2_ERROR_IRQ (1 << 2) +#define APBH_CTRL2_CH1_ERROR_IRQ (1 << 1) +#define APBH_CTRL2_CH0_ERROR_IRQ (1 << 0) + +#define APBH_CHANNEL_CTRL_RESET_CHANNEL_MASK (0xffff << 16) +#define APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET 16 +#define APBH_CHANNEL_CTRL_RESET_CHANNEL_SSP0 (0x0001 << 16) +#define APBH_CHANNEL_CTRL_RESET_CHANNEL_SSP1 (0x0002 << 16) +#define APBH_CHANNEL_CTRL_RESET_CHANNEL_SSP2 (0x0004 << 16) +#define APBH_CHANNEL_CTRL_RESET_CHANNEL_SSP3 (0x0008 << 16) +#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND0 (0x0010 << 16) +#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND1 (0x0020 << 16) +#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND2 (0x0040 << 16) +#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND3 (0x0080 << 16) +#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND4 (0x0100 << 16) +#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND5 (0x0200 << 16) +#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND6 (0x0400 << 16) +#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND7 (0x0800 << 16) +#define APBH_CHANNEL_CTRL_RESET_CHANNEL_HSADC (0x1000 << 16) +#define APBH_CHANNEL_CTRL_RESET_CHANNEL_LCDIF (0x2000 << 16) +#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_MASK 0xffff +#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_OFFSET 0 +#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_SSP0 0x0001 +#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_SSP1 0x0002 +#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_SSP2 0x0004 +#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_SSP3 0x0008 +#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND0 0x0010 +#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND1 0x0020 +#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND2 0x0040 +#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND3 0x0080 +#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND4 0x0100 +#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND5 0x0200 +#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND6 0x0400 +#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND7 0x0800 +#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_HSADC 0x1000 +#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_LCDIF 0x2000 + +#define APBH_DEVSEL_CH15_MASK (0x3 << 30) +#define APBH_DEVSEL_CH15_OFFSET 30 +#define APBH_DEVSEL_CH14_MASK (0x3 << 28) +#define APBH_DEVSEL_CH14_OFFSET 28 +#define APBH_DEVSEL_CH13_MASK (0x3 << 26) +#define APBH_DEVSEL_CH13_OFFSET 26 +#define APBH_DEVSEL_CH12_MASK (0x3 << 24) +#define APBH_DEVSEL_CH12_OFFSET 24 +#define APBH_DEVSEL_CH11_MASK (0x3 << 22) +#define APBH_DEVSEL_CH11_OFFSET 22 +#define APBH_DEVSEL_CH10_MASK (0x3 << 20) +#define APBH_DEVSEL_CH10_OFFSET 20 +#define APBH_DEVSEL_CH9_MASK (0x3 << 18) +#define APBH_DEVSEL_CH9_OFFSET 18 +#define APBH_DEVSEL_CH8_MASK (0x3 << 16) +#define APBH_DEVSEL_CH8_OFFSET 16 +#define APBH_DEVSEL_CH7_MASK (0x3 << 14) +#define APBH_DEVSEL_CH7_OFFSET 14 +#define APBH_DEVSEL_CH6_MASK (0x3 << 12) +#define APBH_DEVSEL_CH6_OFFSET 12 +#define APBH_DEVSEL_CH5_MASK (0x3 << 10) +#define APBH_DEVSEL_CH5_OFFSET 10 +#define APBH_DEVSEL_CH4_MASK (0x3 << 8) +#define APBH_DEVSEL_CH4_OFFSET 8 +#define APBH_DEVSEL_CH3_MASK (0x3 << 6) +#define APBH_DEVSEL_CH3_OFFSET 6 +#define APBH_DEVSEL_CH2_MASK (0x3 << 4) +#define APBH_DEVSEL_CH2_OFFSET 4 +#define APBH_DEVSEL_CH1_MASK (0x3 << 2) +#define APBH_DEVSEL_CH1_OFFSET 2 +#define APBH_DEVSEL_CH0_MASK (0x3 << 0) +#define APBH_DEVSEL_CH0_OFFSET 0 + +#define APBH_DMA_BURST_SIZE_CH15_MASK (0x3 << 30) +#define APBH_DMA_BURST_SIZE_CH15_OFFSET 30 +#define APBH_DMA_BURST_SIZE_CH14_MASK (0x3 << 28) +#define APBH_DMA_BURST_SIZE_CH14_OFFSET 28 +#define APBH_DMA_BURST_SIZE_CH13_MASK (0x3 << 26) +#define APBH_DMA_BURST_SIZE_CH13_OFFSET 26 +#define APBH_DMA_BURST_SIZE_CH12_MASK (0x3 << 24) +#define APBH_DMA_BURST_SIZE_CH12_OFFSET 24 +#define APBH_DMA_BURST_SIZE_CH11_MASK (0x3 << 22) +#define APBH_DMA_BURST_SIZE_CH11_OFFSET 22 +#define APBH_DMA_BURST_SIZE_CH10_MASK (0x3 << 20) +#define APBH_DMA_BURST_SIZE_CH10_OFFSET 20 +#define APBH_DMA_BURST_SIZE_CH9_MASK (0x3 << 18) +#define APBH_DMA_BURST_SIZE_CH9_OFFSET 18 +#define APBH_DMA_BURST_SIZE_CH8_MASK (0x3 << 16) +#define APBH_DMA_BURST_SIZE_CH8_OFFSET 16 +#define APBH_DMA_BURST_SIZE_CH8_BURST0 (0x0 << 16) +#define APBH_DMA_BURST_SIZE_CH8_BURST4 (0x1 << 16) +#define APBH_DMA_BURST_SIZE_CH8_BURST8 (0x2 << 16) +#define APBH_DMA_BURST_SIZE_CH7_MASK (0x3 << 14) +#define APBH_DMA_BURST_SIZE_CH7_OFFSET 14 +#define APBH_DMA_BURST_SIZE_CH6_MASK (0x3 << 12) +#define APBH_DMA_BURST_SIZE_CH6_OFFSET 12 +#define APBH_DMA_BURST_SIZE_CH5_MASK (0x3 << 10) +#define APBH_DMA_BURST_SIZE_CH5_OFFSET 10 +#define APBH_DMA_BURST_SIZE_CH4_MASK (0x3 << 8) +#define APBH_DMA_BURST_SIZE_CH4_OFFSET 8 +#define APBH_DMA_BURST_SIZE_CH3_MASK (0x3 << 6) +#define APBH_DMA_BURST_SIZE_CH3_OFFSET 6 +#define APBH_DMA_BURST_SIZE_CH3_BURST0 (0x0 << 6) +#define APBH_DMA_BURST_SIZE_CH3_BURST4 (0x1 << 6) +#define APBH_DMA_BURST_SIZE_CH3_BURST8 (0x2 << 6) + +#define APBH_DMA_BURST_SIZE_CH2_MASK (0x3 << 4) +#define APBH_DMA_BURST_SIZE_CH2_OFFSET 4 +#define APBH_DMA_BURST_SIZE_CH2_BURST0 (0x0 << 4) +#define APBH_DMA_BURST_SIZE_CH2_BURST4 (0x1 << 4) +#define APBH_DMA_BURST_SIZE_CH2_BURST8 (0x2 << 4) +#define APBH_DMA_BURST_SIZE_CH1_MASK (0x3 << 2) +#define APBH_DMA_BURST_SIZE_CH1_OFFSET 2 +#define APBH_DMA_BURST_SIZE_CH1_BURST0 (0x0 << 2) +#define APBH_DMA_BURST_SIZE_CH1_BURST4 (0x1 << 2) +#define APBH_DMA_BURST_SIZE_CH1_BURST8 (0x2 << 2) + +#define APBH_DMA_BURST_SIZE_CH0_MASK 0x3 +#define APBH_DMA_BURST_SIZE_CH0_OFFSET 0 +#define APBH_DMA_BURST_SIZE_CH0_BURST0 0x0 +#define APBH_DMA_BURST_SIZE_CH0_BURST4 0x1 +#define APBH_DMA_BURST_SIZE_CH0_BURST8 0x2 + +#define APBH_DEBUG_GPMI_ONE_FIFO (1 << 0) + +#define APBH_CHn_CURCMDAR_CMD_ADDR_MASK 0xffffffff +#define APBH_CHn_CURCMDAR_CMD_ADDR_OFFSET 0 + +#define APBH_CHn_NXTCMDAR_CMD_ADDR_MASK 0xffffffff +#define APBH_CHn_NXTCMDAR_CMD_ADDR_OFFSET 0 + +#define APBH_CHn_CMD_XFER_COUNT_MASK (0xffff << 16) +#define APBH_CHn_CMD_XFER_COUNT_OFFSET 16 +#define APBH_CHn_CMD_CMDWORDS_MASK (0xf << 12) +#define APBH_CHn_CMD_CMDWORDS_OFFSET 12 +#define APBH_CHn_CMD_HALTONTERMINATE (1 << 8) +#define APBH_CHn_CMD_WAIT4ENDCMD (1 << 7) +#define APBH_CHn_CMD_SEMAPHORE (1 << 6) +#define APBH_CHn_CMD_NANDWAIT4READY (1 << 5) +#define APBH_CHn_CMD_NANDLOCK (1 << 4) +#define APBH_CHn_CMD_IRQONCMPLT (1 << 3) +#define APBH_CHn_CMD_CHAIN (1 << 2) +#define APBH_CHn_CMD_COMMAND_MASK 0x3 +#define APBH_CHn_CMD_COMMAND_OFFSET 0 +#define APBH_CHn_CMD_COMMAND_NO_DMA_XFER 0x0 +#define APBH_CHn_CMD_COMMAND_DMA_WRITE 0x1 +#define APBH_CHn_CMD_COMMAND_DMA_READ 0x2 +#define APBH_CHn_CMD_COMMAND_DMA_SENSE 0x3 + +#define APBH_CHn_BAR_ADDRESS_MASK 0xffffffff +#define APBH_CHn_BAR_ADDRESS_OFFSET 0 + +#define APBH_CHn_SEMA_RSVD2_MASK (0xff << 24) +#define APBH_CHn_SEMA_RSVD2_OFFSET 24 +#define APBH_CHn_SEMA_PHORE_MASK (0xff << 16) +#define APBH_CHn_SEMA_PHORE_OFFSET 16 +#define APBH_CHn_SEMA_RSVD1_MASK (0xff << 8) +#define APBH_CHn_SEMA_RSVD1_OFFSET 8 +#define APBH_CHn_SEMA_INCREMENT_SEMA_MASK (0xff << 0) +#define APBH_CHn_SEMA_INCREMENT_SEMA_OFFSET 0 + +#define APBH_CHn_DEBUG1_REQ (1 << 31) +#define APBH_CHn_DEBUG1_BURST (1 << 30) +#define APBH_CHn_DEBUG1_KICK (1 << 29) +#define APBH_CHn_DEBUG1_END (1 << 28) +#define APBH_CHn_DEBUG1_SENSE (1 << 27) +#define APBH_CHn_DEBUG1_READY (1 << 26) +#define APBH_CHn_DEBUG1_LOCK (1 << 25) +#define APBH_CHn_DEBUG1_NEXTCMDADDRVALID (1 << 24) +#define APBH_CHn_DEBUG1_RD_FIFO_EMPTY (1 << 23) +#define APBH_CHn_DEBUG1_RD_FIFO_FULL (1 << 22) +#define APBH_CHn_DEBUG1_WR_FIFO_EMPTY (1 << 21) +#define APBH_CHn_DEBUG1_WR_FIFO_FULL (1 << 20) +#define APBH_CHn_DEBUG1_RSVD1_MASK (0x7fff << 5) +#define APBH_CHn_DEBUG1_RSVD1_OFFSET 5 +#define APBH_CHn_DEBUG1_STATEMACHINE_MASK 0x1f +#define APBH_CHn_DEBUG1_STATEMACHINE_OFFSET 0 +#define APBH_CHn_DEBUG1_STATEMACHINE_IDLE 0x00 +#define APBH_CHn_DEBUG1_STATEMACHINE_REQ_CMD1 0x01 +#define APBH_CHn_DEBUG1_STATEMACHINE_REQ_CMD3 0x02 +#define APBH_CHn_DEBUG1_STATEMACHINE_REQ_CMD2 0x03 +#define APBH_CHn_DEBUG1_STATEMACHINE_XFER_DECODE 0x04 +#define APBH_CHn_DEBUG1_STATEMACHINE_REQ_WAIT 0x05 +#define APBH_CHn_DEBUG1_STATEMACHINE_REQ_CMD4 0x06 +#define APBH_CHn_DEBUG1_STATEMACHINE_PIO_REQ 0x07 +#define APBH_CHn_DEBUG1_STATEMACHINE_READ_FLUSH 0x08 +#define APBH_CHn_DEBUG1_STATEMACHINE_READ_WAIT 0x09 +#define APBH_CHn_DEBUG1_STATEMACHINE_WRITE 0x0c +#define APBH_CHn_DEBUG1_STATEMACHINE_READ_REQ 0x0d +#define APBH_CHn_DEBUG1_STATEMACHINE_CHECK_CHAIN 0x0e +#define APBH_CHn_DEBUG1_STATEMACHINE_XFER_COMPLETE 0x0f +#define APBH_CHn_DEBUG1_STATEMACHINE_TERMINATE 0x14 +#define APBH_CHn_DEBUG1_STATEMACHINE_WAIT_END 0x15 +#define APBH_CHn_DEBUG1_STATEMACHINE_WRITE_WAIT 0x1c +#define APBH_CHn_DEBUG1_STATEMACHINE_HALT_AFTER_TERM 0x1d +#define APBH_CHn_DEBUG1_STATEMACHINE_CHECK_WAIT 0x1e +#define APBH_CHn_DEBUG1_STATEMACHINE_WAIT_READY 0x1f + +#define APBH_CHn_DEBUG2_APB_BYTES_MASK (0xffff << 16) +#define APBH_CHn_DEBUG2_APB_BYTES_OFFSET 16 +#define APBH_CHn_DEBUG2_AHB_BYTES_MASK 0xffff +#define APBH_CHn_DEBUG2_AHB_BYTES_OFFSET 0 + +#define APBH_VERSION_MAJOR_MASK (0xff << 24) +#define APBH_VERSION_MAJOR_OFFSET 24 +#define APBH_VERSION_MINOR_MASK (0xff << 16) +#define APBH_VERSION_MINOR_OFFSET 16 +#define APBH_VERSION_STEP_MASK 0xffff +#define APBH_VERSION_STEP_OFFSET 0 + +#endif /* __REGS_APBH_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/regs-base.h b/arch/arm/include/asm/arch-mx28/regs-base.h new file mode 100644 index 000000000..dbdcc2b5b --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/regs-base.h @@ -0,0 +1,88 @@ +/* + * Freescale i.MX28 Peripheral Base Addresses + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * Copyright (C) 2008 Embedded Alley Solutions Inc. + * + * (C) Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __MX28_REGS_BASE_H__ +#define __MX28_REGS_BASE_H__ + +/* + * Register base address + */ +#define MXS_ICOL_BASE 0x80000000 +#define MXS_HSADC_BASE 0x80002000 +#define MXS_APBH_BASE 0x80004000 +#define MXS_PERFMON_BASE 0x80006000 +#define MXS_BCH_BASE 0x8000A000 +#define MXS_GPMI_BASE 0x8000C000 +#define MXS_SSP0_BASE 0x80010000 +#define MXS_SSP1_BASE 0x80012000 +#define MXS_SSP2_BASE 0x80014000 +#define MXS_SSP3_BASE 0x80016000 +#define MXS_PINCTRL_BASE 0x80018000 +#define MXS_DIGCTL_BASE 0x8001C000 +#define MXS_ETM_BASE 0x80022000 +#define MXS_APBX_BASE 0x80024000 +#define MXS_DCP_BASE 0x80028000 +#define MXS_PXP_BASE 0x8002A000 +#define MXS_OCOTP_BASE 0x8002C000 +#define MXS_AXI_AHB0_BASE 0x8002E000 +#define MXS_LCDIF_BASE 0x80030000 +#define MXS_CAN0_BASE 0x80032000 +#define MXS_CAN1_BASE 0x80034000 +#define MXS_SIMDBG_BASE 0x8003C000 +#define MXS_SIMGPMISEL_BASE 0x8003C200 +#define MXS_SIMSSPSEL_BASE 0x8003C300 +#define MXS_SIMMEMSEL_BASE 0x8003C400 +#define MXS_GPIOMON_BASE 0x8003C500 +#define MXS_SIMENET_BASE 0x8003C700 +#define MXS_ARMJTAG_BASE 0x8003C800 +#define MXS_CLKCTRL_BASE 0x80040000 +#define MXS_SAIF0_BASE 0x80042000 +#define MXS_POWER_BASE 0x80044000 +#define MXS_SAIF1_BASE 0x80046000 +#define MXS_LRADC_BASE 0x80050000 +#define MXS_SPDIF_BASE 0x80054000 +#define MXS_RTC_BASE 0x80056000 +#define MXS_I2C0_BASE 0x80058000 +#define MXS_I2C1_BASE 0x8005A000 +#define MXS_PWM_BASE 0x80064000 +#define MXS_TIMROT_BASE 0x80068000 +#define MXS_UARTAPP0_BASE 0x8006A000 +#define MXS_UARTAPP1_BASE 0x8006C000 +#define MXS_UARTAPP2_BASE 0x8006E000 +#define MXS_UARTAPP3_BASE 0x80070000 +#define MXS_UARTAPP4_BASE 0x80072000 +#define MXS_UARTDBG_BASE 0x80074000 +#define MXS_USBPHY0_BASE 0x8007C000 +#define MXS_USBPHY1_BASE 0x8007E000 +#define MXS_USBCTRL0_BASE 0x80080000 +#define MXS_USBCTRL1_BASE 0x80090000 +#define MXS_DFLPT_BASE 0x800C0000 +#define MXS_DRAM_BASE 0x800E0000 +#define MXS_ENET0_BASE 0x800F0000 +#define MXS_ENET1_BASE 0x800F4000 + +#endif /* __MX28_REGS_BASE_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/regs-bch.h b/arch/arm/include/asm/arch-mx28/regs-bch.h new file mode 100644 index 000000000..cac04709d --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/regs-bch.h @@ -0,0 +1,230 @@ +/* + * Freescale i.MX28 BCH Register Definitions + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __MX28_REGS_BCH_H__ +#define __MX28_REGS_BCH_H__ + +#include <asm/arch/regs-common.h> + +#ifndef __ASSEMBLY__ +struct mx28_bch_regs { + mx28_reg(hw_bch_ctrl) + mx28_reg(hw_bch_status0) + mx28_reg(hw_bch_mode) + mx28_reg(hw_bch_encodeptr) + mx28_reg(hw_bch_dataptr) + mx28_reg(hw_bch_metaptr) + + uint32_t reserved[4]; + + mx28_reg(hw_bch_layoutselect) + mx28_reg(hw_bch_flash0layout0) + mx28_reg(hw_bch_flash0layout1) + mx28_reg(hw_bch_flash1layout0) + mx28_reg(hw_bch_flash1layout1) + mx28_reg(hw_bch_flash2layout0) + mx28_reg(hw_bch_flash2layout1) + mx28_reg(hw_bch_flash3layout0) + mx28_reg(hw_bch_flash3layout1) + mx28_reg(hw_bch_dbgkesread) + mx28_reg(hw_bch_dbgcsferead) + mx28_reg(hw_bch_dbgsyndegread) + mx28_reg(hw_bch_dbgahbmread) + mx28_reg(hw_bch_blockname) + mx28_reg(hw_bch_version) +}; +#endif + +#define BCH_CTRL_SFTRST (1 << 31) +#define BCH_CTRL_CLKGATE (1 << 30) +#define BCH_CTRL_DEBUGSYNDROME (1 << 22) +#define BCH_CTRL_M2M_LAYOUT_MASK (0x3 << 18) +#define BCH_CTRL_M2M_LAYOUT_OFFSET 18 +#define BCH_CTRL_M2M_ENCODE (1 << 17) +#define BCH_CTRL_M2M_ENABLE (1 << 16) +#define BCH_CTRL_DEBUG_STALL_IRQ_EN (1 << 10) +#define BCH_CTRL_COMPLETE_IRQ_EN (1 << 8) +#define BCH_CTRL_BM_ERROR_IRQ (1 << 3) +#define BCH_CTRL_DEBUG_STALL_IRQ (1 << 2) +#define BCH_CTRL_COMPLETE_IRQ (1 << 0) + +#define BCH_STATUS0_HANDLE_MASK (0xfff << 20) +#define BCH_STATUS0_HANDLE_OFFSET 20 +#define BCH_STATUS0_COMPLETED_CE_MASK (0xf << 16) +#define BCH_STATUS0_COMPLETED_CE_OFFSET 16 +#define BCH_STATUS0_STATUS_BLK0_MASK (0xff << 8) +#define BCH_STATUS0_STATUS_BLK0_OFFSET 8 +#define BCH_STATUS0_STATUS_BLK0_ZERO (0x00 << 8) +#define BCH_STATUS0_STATUS_BLK0_ERROR1 (0x01 << 8) +#define BCH_STATUS0_STATUS_BLK0_ERROR2 (0x02 << 8) +#define BCH_STATUS0_STATUS_BLK0_ERROR3 (0x03 << 8) +#define BCH_STATUS0_STATUS_BLK0_ERROR4 (0x04 << 8) +#define BCH_STATUS0_STATUS_BLK0_UNCORRECTABLE (0xfe << 8) +#define BCH_STATUS0_STATUS_BLK0_ERASED (0xff << 8) +#define BCH_STATUS0_ALLONES (1 << 4) +#define BCH_STATUS0_CORRECTED (1 << 3) +#define BCH_STATUS0_UNCORRECTABLE (1 << 2) + +#define BCH_MODE_ERASE_THRESHOLD_MASK 0xff +#define BCH_MODE_ERASE_THRESHOLD_OFFSET 0 + +#define BCH_ENCODEPTR_ADDR_MASK 0xffffffff +#define BCH_ENCODEPTR_ADDR_OFFSET 0 + +#define BCH_DATAPTR_ADDR_MASK 0xffffffff +#define BCH_DATAPTR_ADDR_OFFSET 0 + +#define BCH_METAPTR_ADDR_MASK 0xffffffff +#define BCH_METAPTR_ADDR_OFFSET 0 + +#define BCH_LAYOUTSELECT_CS15_SELECT_MASK (0x3 << 30) +#define BCH_LAYOUTSELECT_CS15_SELECT_OFFSET 30 +#define BCH_LAYOUTSELECT_CS14_SELECT_MASK (0x3 << 28) +#define BCH_LAYOUTSELECT_CS14_SELECT_OFFSET 28 +#define BCH_LAYOUTSELECT_CS13_SELECT_MASK (0x3 << 26) +#define BCH_LAYOUTSELECT_CS13_SELECT_OFFSET 26 +#define BCH_LAYOUTSELECT_CS12_SELECT_MASK (0x3 << 24) +#define BCH_LAYOUTSELECT_CS12_SELECT_OFFSET 24 +#define BCH_LAYOUTSELECT_CS11_SELECT_MASK (0x3 << 22) +#define BCH_LAYOUTSELECT_CS11_SELECT_OFFSET 22 +#define BCH_LAYOUTSELECT_CS10_SELECT_MASK (0x3 << 20) +#define BCH_LAYOUTSELECT_CS10_SELECT_OFFSET 20 +#define BCH_LAYOUTSELECT_CS9_SELECT_MASK (0x3 << 18) +#define BCH_LAYOUTSELECT_CS9_SELECT_OFFSET 18 +#define BCH_LAYOUTSELECT_CS8_SELECT_MASK (0x3 << 16) +#define BCH_LAYOUTSELECT_CS8_SELECT_OFFSET 16 +#define BCH_LAYOUTSELECT_CS7_SELECT_MASK (0x3 << 14) +#define BCH_LAYOUTSELECT_CS7_SELECT_OFFSET 14 +#define BCH_LAYOUTSELECT_CS6_SELECT_MASK (0x3 << 12) +#define BCH_LAYOUTSELECT_CS6_SELECT_OFFSET 12 +#define BCH_LAYOUTSELECT_CS5_SELECT_MASK (0x3 << 10) +#define BCH_LAYOUTSELECT_CS5_SELECT_OFFSET 10 +#define BCH_LAYOUTSELECT_CS4_SELECT_MASK (0x3 << 8) +#define BCH_LAYOUTSELECT_CS4_SELECT_OFFSET 8 +#define BCH_LAYOUTSELECT_CS3_SELECT_MASK (0x3 << 6) +#define BCH_LAYOUTSELECT_CS3_SELECT_OFFSET 6 +#define BCH_LAYOUTSELECT_CS2_SELECT_MASK (0x3 << 4) +#define BCH_LAYOUTSELECT_CS2_SELECT_OFFSET 4 +#define BCH_LAYOUTSELECT_CS1_SELECT_MASK (0x3 << 2) +#define BCH_LAYOUTSELECT_CS1_SELECT_OFFSET 2 +#define BCH_LAYOUTSELECT_CS0_SELECT_MASK (0x3 << 0) +#define BCH_LAYOUTSELECT_CS0_SELECT_OFFSET 0 + +#define BCH_FLASHLAYOUT0_NBLOCKS_MASK (0xff << 24) +#define BCH_FLASHLAYOUT0_NBLOCKS_OFFSET 24 +#define BCH_FLASHLAYOUT0_META_SIZE_MASK (0xff << 16) +#define BCH_FLASHLAYOUT0_META_SIZE_OFFSET 16 +#define BCH_FLASHLAYOUT0_ECC0_MASK (0xf << 12) +#define BCH_FLASHLAYOUT0_ECC0_OFFSET 12 +#define BCH_FLASHLAYOUT0_ECC0_NONE (0x0 << 12) +#define BCH_FLASHLAYOUT0_ECC0_ECC2 (0x1 << 12) +#define BCH_FLASHLAYOUT0_ECC0_ECC4 (0x2 << 12) +#define BCH_FLASHLAYOUT0_ECC0_ECC6 (0x3 << 12) +#define BCH_FLASHLAYOUT0_ECC0_ECC8 (0x4 << 12) +#define BCH_FLASHLAYOUT0_ECC0_ECC10 (0x5 << 12) +#define BCH_FLASHLAYOUT0_ECC0_ECC12 (0x6 << 12) +#define BCH_FLASHLAYOUT0_ECC0_ECC14 (0x7 << 12) +#define BCH_FLASHLAYOUT0_ECC0_ECC16 (0x8 << 12) +#define BCH_FLASHLAYOUT0_ECC0_ECC18 (0x9 << 12) +#define BCH_FLASHLAYOUT0_ECC0_ECC20 (0xa << 12) +#define BCH_FLASHLAYOUT0_ECC0_ECC22 (0xb << 12) +#define BCH_FLASHLAYOUT0_ECC0_ECC24 (0xc << 12) +#define BCH_FLASHLAYOUT0_ECC0_ECC26 (0xd << 12) +#define BCH_FLASHLAYOUT0_ECC0_ECC28 (0xe << 12) +#define BCH_FLASHLAYOUT0_ECC0_ECC30 (0xf << 12) +#define BCH_FLASHLAYOUT0_ECC0_ECC32 (0x10 << 12) +#define BCH_FLASHLAYOUT0_GF13_0_GF14_1 (1 << 10) +#define BCH_FLASHLAYOUT0_DATA0_SIZE_MASK 0xfff +#define BCH_FLASHLAYOUT0_DATA0_SIZE_OFFSET 0 + +#define BCH_FLASHLAYOUT1_PAGE_SIZE_MASK (0xffff << 16) +#define BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET 16 +#define BCH_FLASHLAYOUT1_ECCN_MASK (0xf << 12) +#define BCH_FLASHLAYOUT1_ECCN_OFFSET 12 +#define BCH_FLASHLAYOUT1_ECCN_NONE (0x0 << 12) +#define BCH_FLASHLAYOUT1_ECCN_ECC2 (0x1 << 12) +#define BCH_FLASHLAYOUT1_ECCN_ECC4 (0x2 << 12) +#define BCH_FLASHLAYOUT1_ECCN_ECC6 (0x3 << 12) +#define BCH_FLASHLAYOUT1_ECCN_ECC8 (0x4 << 12) +#define BCH_FLASHLAYOUT1_ECCN_ECC10 (0x5 << 12) +#define BCH_FLASHLAYOUT1_ECCN_ECC12 (0x6 << 12) +#define BCH_FLASHLAYOUT1_ECCN_ECC14 (0x7 << 12) +#define BCH_FLASHLAYOUT1_ECCN_ECC16 (0x8 << 12) +#define BCH_FLASHLAYOUT1_ECCN_ECC18 (0x9 << 12) +#define BCH_FLASHLAYOUT1_ECCN_ECC20 (0xa << 12) +#define BCH_FLASHLAYOUT1_ECCN_ECC22 (0xb << 12) +#define BCH_FLASHLAYOUT1_ECCN_ECC24 (0xc << 12) +#define BCH_FLASHLAYOUT1_ECCN_ECC26 (0xd << 12) +#define BCH_FLASHLAYOUT1_ECCN_ECC28 (0xe << 12) +#define BCH_FLASHLAYOUT1_ECCN_ECC30 (0xf << 12) +#define BCH_FLASHLAYOUT1_ECCN_ECC32 (0x10 << 12) +#define BCH_FLASHLAYOUT1_GF13_0_GF14_1 (1 << 10) +#define BCH_FLASHLAYOUT1_DATAN_SIZE_MASK 0xfff +#define BCH_FLASHLAYOUT1_DATAN_SIZE_OFFSET 0 + +#define BCH_DEBUG0_RSVD1_MASK (0x1f << 27) +#define BCH_DEBUG0_RSVD1_OFFSET 27 +#define BCH_DEBUG0_ROM_BIST_ENABLE (1 << 26) +#define BCH_DEBUG0_ROM_BIST_COMPLETE (1 << 25) +#define BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_MASK (0x1ff << 16) +#define BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_OFFSET 16 +#define BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_NORMAL (0x0 << 16) +#define BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_TEST_MODE (0x1 << 16) +#define BCH_DEBUG0_KES_DEBUG_SHIFT_SYND (1 << 15) +#define BCH_DEBUG0_KES_DEBUG_PAYLOAD_FLAG (1 << 14) +#define BCH_DEBUG0_KES_DEBUG_MODE4K (1 << 13) +#define BCH_DEBUG0_KES_DEBUG_KICK (1 << 12) +#define BCH_DEBUG0_KES_STANDALONE (1 << 11) +#define BCH_DEBUG0_KES_DEBUG_STEP (1 << 10) +#define BCH_DEBUG0_KES_DEBUG_STALL (1 << 9) +#define BCH_DEBUG0_BM_KES_TEST_BYPASS (1 << 8) +#define BCH_DEBUG0_RSVD0_MASK (0x3 << 6) +#define BCH_DEBUG0_RSVD0_OFFSET 6 +#define BCH_DEBUG0_DEBUG_REG_SELECT_MASK 0x3f +#define BCH_DEBUG0_DEBUG_REG_SELECT_OFFSET 0 + +#define BCH_DBGKESREAD_VALUES_MASK 0xffffffff +#define BCH_DBGKESREAD_VALUES_OFFSET 0 + +#define BCH_DBGCSFEREAD_VALUES_MASK 0xffffffff +#define BCH_DBGCSFEREAD_VALUES_OFFSET 0 + +#define BCH_DBGSYNDGENREAD_VALUES_MASK 0xffffffff +#define BCH_DBGSYNDGENREAD_VALUES_OFFSET 0 + +#define BCH_DBGAHBMREAD_VALUES_MASK 0xffffffff +#define BCH_DBGAHBMREAD_VALUES_OFFSET 0 + +#define BCH_BLOCKNAME_NAME_MASK 0xffffffff +#define BCH_BLOCKNAME_NAME_OFFSET 0 + +#define BCH_VERSION_MAJOR_MASK (0xff << 24) +#define BCH_VERSION_MAJOR_OFFSET 24 +#define BCH_VERSION_MINOR_MASK (0xff << 16) +#define BCH_VERSION_MINOR_OFFSET 16 +#define BCH_VERSION_STEP_MASK 0xffff +#define BCH_VERSION_STEP_OFFSET 0 + +#endif /* __MX28_REGS_BCH_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/regs-clkctrl.h b/arch/arm/include/asm/arch-mx28/regs-clkctrl.h new file mode 100644 index 000000000..93d0397ef --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/regs-clkctrl.h @@ -0,0 +1,312 @@ +/* + * Freescale i.MX28 CLKCTRL Register Definitions + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __MX28_REGS_CLKCTRL_H__ +#define __MX28_REGS_CLKCTRL_H__ + +#include <asm/arch/regs-common.h> + +#ifndef __ASSEMBLY__ +struct mx28_clkctrl_regs { + mx28_reg(hw_clkctrl_pll0ctrl0) /* 0x00 */ + mx28_reg(hw_clkctrl_pll0ctrl1) /* 0x10 */ + mx28_reg(hw_clkctrl_pll1ctrl0) /* 0x20 */ + mx28_reg(hw_clkctrl_pll1ctrl1) /* 0x30 */ + mx28_reg(hw_clkctrl_pll2ctrl0) /* 0x40 */ + mx28_reg(hw_clkctrl_cpu) /* 0x50 */ + mx28_reg(hw_clkctrl_hbus) /* 0x60 */ + mx28_reg(hw_clkctrl_xbus) /* 0x70 */ + mx28_reg(hw_clkctrl_xtal) /* 0x80 */ + mx28_reg(hw_clkctrl_ssp0) /* 0x90 */ + mx28_reg(hw_clkctrl_ssp1) /* 0xa0 */ + mx28_reg(hw_clkctrl_ssp2) /* 0xb0 */ + mx28_reg(hw_clkctrl_ssp3) /* 0xc0 */ + mx28_reg(hw_clkctrl_gpmi) /* 0xd0 */ + mx28_reg(hw_clkctrl_spdif) /* 0xe0 */ + mx28_reg(hw_clkctrl_emi) /* 0xf0 */ + mx28_reg(hw_clkctrl_saif0) /* 0x100 */ + mx28_reg(hw_clkctrl_saif1) /* 0x110 */ + mx28_reg(hw_clkctrl_lcdif) /* 0x120 */ + mx28_reg(hw_clkctrl_etm) /* 0x130 */ + mx28_reg(hw_clkctrl_enet) /* 0x140 */ + mx28_reg(hw_clkctrl_hsadc) /* 0x150 */ + mx28_reg(hw_clkctrl_flexcan) /* 0x160 */ + + uint32_t reserved[16]; + + mx28_reg(hw_clkctrl_frac0) /* 0x1b0 */ + mx28_reg(hw_clkctrl_frac1) /* 0x1c0 */ + mx28_reg(hw_clkctrl_clkseq) /* 0x1d0 */ + mx28_reg(hw_clkctrl_reset) /* 0x1e0 */ + mx28_reg(hw_clkctrl_status) /* 0x1f0 */ + mx28_reg(hw_clkctrl_version) /* 0x200 */ +}; +#endif + +#define CLKCTRL_PLL0CTRL0_LFR_SEL_MASK (0x3 << 28) +#define CLKCTRL_PLL0CTRL0_LFR_SEL_OFFSET 28 +#define CLKCTRL_PLL0CTRL0_LFR_SEL_DEFAULT (0x0 << 28) +#define CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_2 (0x1 << 28) +#define CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_05 (0x2 << 28) +#define CLKCTRL_PLL0CTRL0_LFR_SEL_UNDEFINED (0x3 << 28) +#define CLKCTRL_PLL0CTRL0_CP_SEL_MASK (0x3 << 24) +#define CLKCTRL_PLL0CTRL0_CP_SEL_OFFSET 24 +#define CLKCTRL_PLL0CTRL0_CP_SEL_DEFAULT (0x0 << 24) +#define CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_2 (0x1 << 24) +#define CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_05 (0x2 << 24) +#define CLKCTRL_PLL0CTRL0_CP_SEL_UNDEFINED (0x3 << 24) +#define CLKCTRL_PLL0CTRL0_DIV_SEL_MASK (0x3 << 20) +#define CLKCTRL_PLL0CTRL0_DIV_SEL_OFFSET 20 +#define CLKCTRL_PLL0CTRL0_DIV_SEL_DEFAULT (0x0 << 20) +#define CLKCTRL_PLL0CTRL0_DIV_SEL_LOWER (0x1 << 20) +#define CLKCTRL_PLL0CTRL0_DIV_SEL_LOWEST (0x2 << 20) +#define CLKCTRL_PLL0CTRL0_DIV_SEL_UNDEFINED (0x3 << 20) +#define CLKCTRL_PLL0CTRL0_EN_USB_CLKS (1 << 18) +#define CLKCTRL_PLL0CTRL0_POWER (1 << 17) + +#define CLKCTRL_PLL0CTRL1_LOCK (1 << 31) +#define CLKCTRL_PLL0CTRL1_FORCE_LOCK (1 << 30) +#define CLKCTRL_PLL0CTRL1_LOCK_COUNT_MASK 0xffff +#define CLKCTRL_PLL0CTRL1_LOCK_COUNT_OFFSET 0 + +#define CLKCTRL_PLL1CTRL0_CLKGATEEMI (1 << 31) +#define CLKCTRL_PLL1CTRL0_LFR_SEL_MASK (0x3 << 28) +#define CLKCTRL_PLL1CTRL0_LFR_SEL_OFFSET 28 +#define CLKCTRL_PLL1CTRL0_LFR_SEL_DEFAULT (0x0 << 28) +#define CLKCTRL_PLL1CTRL0_LFR_SEL_TIMES_2 (0x1 << 28) +#define CLKCTRL_PLL1CTRL0_LFR_SEL_TIMES_05 (0x2 << 28) +#define CLKCTRL_PLL1CTRL0_LFR_SEL_UNDEFINED (0x3 << 28) +#define CLKCTRL_PLL1CTRL0_CP_SEL_MASK (0x3 << 24) +#define CLKCTRL_PLL1CTRL0_CP_SEL_OFFSET 24 +#define CLKCTRL_PLL1CTRL0_CP_SEL_DEFAULT (0x0 << 24) +#define CLKCTRL_PLL1CTRL0_CP_SEL_TIMES_2 (0x1 << 24) +#define CLKCTRL_PLL1CTRL0_CP_SEL_TIMES_05 (0x2 << 24) +#define CLKCTRL_PLL1CTRL0_CP_SEL_UNDEFINED (0x3 << 24) +#define CLKCTRL_PLL1CTRL0_DIV_SEL_MASK (0x3 << 20) +#define CLKCTRL_PLL1CTRL0_DIV_SEL_OFFSET 20 +#define CLKCTRL_PLL1CTRL0_DIV_SEL_DEFAULT (0x0 << 20) +#define CLKCTRL_PLL1CTRL0_DIV_SEL_LOWER (0x1 << 20) +#define CLKCTRL_PLL1CTRL0_DIV_SEL_LOWEST (0x2 << 20) +#define CLKCTRL_PLL1CTRL0_DIV_SEL_UNDEFINED (0x3 << 20) +#define CLKCTRL_PLL1CTRL0_EN_USB_CLKS (1 << 18) +#define CLKCTRL_PLL1CTRL0_POWER (1 << 17) + +#define CLKCTRL_PLL1CTRL1_LOCK (1 << 31) +#define CLKCTRL_PLL1CTRL1_FORCE_LOCK (1 << 30) +#define CLKCTRL_PLL1CTRL1_LOCK_COUNT_MASK 0xffff +#define CLKCTRL_PLL1CTRL1_LOCK_COUNT_OFFSET 0 + +#define CLKCTRL_PLL2CTRL0_CLKGATE (1 << 31) +#define CLKCTRL_PLL2CTRL0_LFR_SEL_MASK (0x3 << 28) +#define CLKCTRL_PLL2CTRL0_LFR_SEL_OFFSET 28 +#define CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B (1 << 26) +#define CLKCTRL_PLL2CTRL0_CP_SEL_MASK (0x3 << 24) +#define CLKCTRL_PLL2CTRL0_CP_SEL_OFFSET 24 +#define CLKCTRL_PLL2CTRL0_POWER (1 << 23) + +#define CLKCTRL_CPU_BUSY_REF_XTAL (1 << 29) +#define CLKCTRL_CPU_BUSY_REF_CPU (1 << 28) +#define CLKCTRL_CPU_DIV_XTAL_FRAC_EN (1 << 26) +#define CLKCTRL_CPU_DIV_XTAL_MASK (0x3ff << 16) +#define CLKCTRL_CPU_DIV_XTAL_OFFSET 16 +#define CLKCTRL_CPU_INTERRUPT_WAIT (1 << 12) +#define CLKCTRL_CPU_DIV_CPU_FRAC_EN (1 << 10) +#define CLKCTRL_CPU_DIV_CPU_MASK 0x3f +#define CLKCTRL_CPU_DIV_CPU_OFFSET 0 + +#define CLKCTRL_HBUS_ASM_BUSY (1 << 31) +#define CLKCTRL_HBUS_DCP_AS_ENABLE (1 << 30) +#define CLKCTRL_HBUS_PXP_AS_ENABLE (1 << 29) +#define CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE (1 << 27) +#define CLKCTRL_HBUS_APBHDMA_AS_ENABLE (1 << 26) +#define CLKCTRL_HBUS_APBXDMA_AS_ENABLE (1 << 25) +#define CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE (1 << 24) +#define CLKCTRL_HBUS_TRAFFIC_AS_ENABLE (1 << 23) +#define CLKCTRL_HBUS_CPU_DATA_AS_ENABLE (1 << 22) +#define CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE (1 << 21) +#define CLKCTRL_HBUS_ASM_ENABLE (1 << 20) +#define CLKCTRL_HBUS_AUTO_CLEAR_DIV_ENABLE (1 << 19) +#define CLKCTRL_HBUS_SLOW_DIV_MASK (0x7 << 16) +#define CLKCTRL_HBUS_SLOW_DIV_OFFSET 16 +#define CLKCTRL_HBUS_SLOW_DIV_BY1 (0x0 << 16) +#define CLKCTRL_HBUS_SLOW_DIV_BY2 (0x1 << 16) +#define CLKCTRL_HBUS_SLOW_DIV_BY4 (0x2 << 16) +#define CLKCTRL_HBUS_SLOW_DIV_BY8 (0x3 << 16) +#define CLKCTRL_HBUS_SLOW_DIV_BY16 (0x4 << 16) +#define CLKCTRL_HBUS_SLOW_DIV_BY32 (0x5 << 16) +#define CLKCTRL_HBUS_DIV_FRAC_EN (1 << 5) +#define CLKCTRL_HBUS_DIV_MASK 0x1f +#define CLKCTRL_HBUS_DIV_OFFSET 0 + +#define CLKCTRL_XBUS_BUSY (1 << 31) +#define CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE (1 << 11) +#define CLKCTRL_XBUS_DIV_FRAC_EN (1 << 10) +#define CLKCTRL_XBUS_DIV_MASK 0x3ff +#define CLKCTRL_XBUS_DIV_OFFSET 0 + +#define CLKCTRL_XTAL_UART_CLK_GATE (1 << 31) +#define CLKCTRL_XTAL_PWM_CLK24M_GATE (1 << 29) +#define CLKCTRL_XTAL_TIMROT_CLK32K_GATE (1 << 26) +#define CLKCTRL_XTAL_DIV_UART_MASK 0x3 +#define CLKCTRL_XTAL_DIV_UART_OFFSET 0 + +#define CLKCTRL_SSP_CLKGATE (1 << 31) +#define CLKCTRL_SSP_BUSY (1 << 29) +#define CLKCTRL_SSP_DIV_FRAC_EN (1 << 9) +#define CLKCTRL_SSP_DIV_MASK 0x1ff +#define CLKCTRL_SSP_DIV_OFFSET 0 + +#define CLKCTRL_GPMI_CLKGATE (1 << 31) +#define CLKCTRL_GPMI_BUSY (1 << 29) +#define CLKCTRL_GPMI_DIV_FRAC_EN (1 << 10) +#define CLKCTRL_GPMI_DIV_MASK 0x3ff +#define CLKCTRL_GPMI_DIV_OFFSET 0 + +#define CLKCTRL_SPDIF_CLKGATE (1 << 31) + +#define CLKCTRL_EMI_CLKGATE (1 << 31) +#define CLKCTRL_EMI_SYNC_MODE_EN (1 << 30) +#define CLKCTRL_EMI_BUSY_REF_XTAL (1 << 29) +#define CLKCTRL_EMI_BUSY_REF_EMI (1 << 28) +#define CLKCTRL_EMI_BUSY_REF_CPU (1 << 27) +#define CLKCTRL_EMI_BUSY_SYNC_MODE (1 << 26) +#define CLKCTRL_EMI_BUSY_DCC_RESYNC (1 << 17) +#define CLKCTRL_EMI_DCC_RESYNC_ENABLE (1 << 16) +#define CLKCTRL_EMI_DIV_XTAL_MASK (0xf << 8) +#define CLKCTRL_EMI_DIV_XTAL_OFFSET 8 +#define CLKCTRL_EMI_DIV_EMI_MASK 0x3f +#define CLKCTRL_EMI_DIV_EMI_OFFSET 0 + +#define CLKCTRL_SAIF0_CLKGATE (1 << 31) +#define CLKCTRL_SAIF0_BUSY (1 << 29) +#define CLKCTRL_SAIF0_DIV_FRAC_EN (1 << 16) +#define CLKCTRL_SAIF0_DIV_MASK 0xffff +#define CLKCTRL_SAIF0_DIV_OFFSET 0 + +#define CLKCTRL_SAIF1_CLKGATE (1 << 31) +#define CLKCTRL_SAIF1_BUSY (1 << 29) +#define CLKCTRL_SAIF1_DIV_FRAC_EN (1 << 16) +#define CLKCTRL_SAIF1_DIV_MASK 0xffff +#define CLKCTRL_SAIF1_DIV_OFFSET 0 + +#define CLKCTRL_DIS_LCDIF_CLKGATE (1 << 31) +#define CLKCTRL_DIS_LCDIF_BUSY (1 << 29) +#define CLKCTRL_DIS_LCDIF_DIV_FRAC_EN (1 << 13) +#define CLKCTRL_DIS_LCDIF_DIV_MASK 0x1fff +#define CLKCTRL_DIS_LCDIF_DIV_OFFSET 0 + +#define CLKCTRL_ETM_CLKGATE (1 << 31) +#define CLKCTRL_ETM_BUSY (1 << 29) +#define CLKCTRL_ETM_DIV_FRAC_EN (1 << 7) +#define CLKCTRL_ETM_DIV_MASK 0x7f +#define CLKCTRL_ETM_DIV_OFFSET 0 + +#define CLKCTRL_ENET_SLEEP (1 << 31) +#define CLKCTRL_ENET_DISABLE (1 << 30) +#define CLKCTRL_ENET_STATUS (1 << 29) +#define CLKCTRL_ENET_BUSY_TIME (1 << 27) +#define CLKCTRL_ENET_DIV_TIME_MASK (0x3f << 21) +#define CLKCTRL_ENET_DIV_TIME_OFFSET 21 +#define CLKCTRL_ENET_TIME_SEL_MASK (0x3 << 19) +#define CLKCTRL_ENET_TIME_SEL_OFFSET 19 +#define CLKCTRL_ENET_TIME_SEL_XTAL (0x0 << 19) +#define CLKCTRL_ENET_TIME_SEL_PLL (0x1 << 19) +#define CLKCTRL_ENET_TIME_SEL_RMII_CLK (0x2 << 19) +#define CLKCTRL_ENET_TIME_SEL_UNDEFINED (0x3 << 19) +#define CLKCTRL_ENET_CLK_OUT_EN (1 << 18) +#define CLKCTRL_ENET_RESET_BY_SW_CHIP (1 << 17) +#define CLKCTRL_ENET_RESET_BY_SW (1 << 16) + +#define CLKCTRL_HSADC_RESETB (1 << 30) +#define CLKCTRL_HSADC_FREQDIV_MASK (0x3 << 28) +#define CLKCTRL_HSADC_FREQDIV_OFFSET 28 + +#define CLKCTRL_FLEXCAN_STOP_CAN0 (1 << 30) +#define CLKCTRL_FLEXCAN_CAN0_STATUS (1 << 29) +#define CLKCTRL_FLEXCAN_STOP_CAN1 (1 << 28) +#define CLKCTRL_FLEXCAN_CAN1_STATUS (1 << 27) + +#define CLKCTRL_FRAC0_CLKGATEIO0 (1 << 31) +#define CLKCTRL_FRAC0_IO0_STABLE (1 << 30) +#define CLKCTRL_FRAC0_IO0FRAC_MASK (0x3f << 24) +#define CLKCTRL_FRAC0_IO0FRAC_OFFSET 24 +#define CLKCTRL_FRAC0_CLKGATEIO1 (1 << 23) +#define CLKCTRL_FRAC0_IO1_STABLE (1 << 22) +#define CLKCTRL_FRAC0_IO1FRAC_MASK (0x3f << 16) +#define CLKCTRL_FRAC0_IO1FRAC_OFFSET 16 +#define CLKCTRL_FRAC0_CLKGATEEMI (1 << 15) +#define CLKCTRL_FRAC0_EMI_STABLE (1 << 14) +#define CLKCTRL_FRAC0_EMIFRAC_MASK (0x3f << 8) +#define CLKCTRL_FRAC0_EMIFRAC_OFFSET 8 +#define CLKCTRL_FRAC0_CLKGATECPU (1 << 7) +#define CLKCTRL_FRAC0_CPU_STABLE (1 << 6) +#define CLKCTRL_FRAC0_CPUFRAC_MASK 0x3f +#define CLKCTRL_FRAC0_CPUFRAC_OFFSET 0 + +#define CLKCTRL_FRAC1_CLKGATEGPMI (1 << 23) +#define CLKCTRL_FRAC1_GPMI_STABLE (1 << 22) +#define CLKCTRL_FRAC1_GPMIFRAC_MASK (0x3f << 16) +#define CLKCTRL_FRAC1_GPMIFRAC_OFFSET 16 +#define CLKCTRL_FRAC1_CLKGATEHSADC (1 << 15) +#define CLKCTRL_FRAC1_HSADC_STABLE (1 << 14) +#define CLKCTRL_FRAC1_HSADCFRAC_MASK (0x3f << 8) +#define CLKCTRL_FRAC1_HSADCFRAC_OFFSET 8 +#define CLKCTRL_FRAC1_CLKGATEPIX (1 << 7) +#define CLKCTRL_FRAC1_PIX_STABLE (1 << 6) +#define CLKCTRL_FRAC1_PIXFRAC_MASK 0x3f +#define CLKCTRL_FRAC1_PIXFRAC_OFFSET 0 + +#define CLKCTRL_CLKSEQ_BYPASS_CPU (1 << 18) +#define CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF (1 << 14) +#define CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF_BYPASS (0x1 << 14) +#define CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF_PFD (0x0 << 14) +#define CLKCTRL_CLKSEQ_BYPASS_ETM (1 << 8) +#define CLKCTRL_CLKSEQ_BYPASS_EMI (1 << 7) +#define CLKCTRL_CLKSEQ_BYPASS_SSP3 (1 << 6) +#define CLKCTRL_CLKSEQ_BYPASS_SSP2 (1 << 5) +#define CLKCTRL_CLKSEQ_BYPASS_SSP1 (1 << 4) +#define CLKCTRL_CLKSEQ_BYPASS_SSP0 (1 << 3) +#define CLKCTRL_CLKSEQ_BYPASS_GPMI (1 << 2) +#define CLKCTRL_CLKSEQ_BYPASS_SAIF1 (1 << 1) +#define CLKCTRL_CLKSEQ_BYPASS_SAIF0 (1 << 0) + +#define CLKCTRL_RESET_WDOG_POR_DISABLE (1 << 5) +#define CLKCTRL_RESET_EXTERNAL_RESET_ENABLE (1 << 4) +#define CLKCTRL_RESET_THERMAL_RESET_ENABLE (1 << 3) +#define CLKCTRL_RESET_THERMAL_RESET_DEFAULT (1 << 2) +#define CLKCTRL_RESET_CHIP (1 << 1) +#define CLKCTRL_RESET_DIG (1 << 0) + +#define CLKCTRL_STATUS_CPU_LIMIT_MASK (0x3 << 30) +#define CLKCTRL_STATUS_CPU_LIMIT_OFFSET 30 + +#define CLKCTRL_VERSION_MAJOR_MASK (0xff << 24) +#define CLKCTRL_VERSION_MAJOR_OFFSET 24 +#define CLKCTRL_VERSION_MINOR_MASK (0xff << 16) +#define CLKCTRL_VERSION_MINOR_OFFSET 16 +#define CLKCTRL_VERSION_STEP_MASK 0xffff +#define CLKCTRL_VERSION_STEP_OFFSET 0 + +#endif /* __MX28_REGS_CLKCTRL_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/regs-common.h b/arch/arm/include/asm/arch-mx28/regs-common.h new file mode 100644 index 000000000..efe975b4b --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/regs-common.h @@ -0,0 +1,66 @@ +/* + * Freescale i.MX28 Register Accessors + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __MX28_REGS_COMMON_H__ +#define __MX28_REGS_COMMON_H__ + +/* + * The i.MX28 has interesting feature when it comes to register access. There + * are four kinds of access to one particular register. Those are: + * + * 1) Common read/write access. To use this mode, just write to the address of + * the register. + * 2) Set bits only access. To set bits, write which bits you want to set to the + * address of the register + 0x4. + * 3) Clear bits only access. To clear bits, write which bits you want to clear + * to the address of the register + 0x8. + * 4) Toggle bits only access. To toggle bits, write which bits you want to + * toggle to the address of the register + 0xc. + * + * IMPORTANT NOTE: Not all registers support accesses 2-4! Also, not all bits + * can be set/cleared by pure write as in access type 1, some need to be + * explicitly set/cleared by using access type 2-3. + * + * The following macros and structures allow the user to either access the + * register in all aforementioned modes (by accessing reg_name, reg_name_set, + * reg_name_clr, reg_name_tog) or pass the register structure further into + * various functions with correct type information (by accessing reg_name_reg). + * + */ + +#define __mx28_reg(name) \ + uint32_t name; \ + uint32_t name##_set; \ + uint32_t name##_clr; \ + uint32_t name##_tog; + +struct mx28_register { + __mx28_reg(reg) +}; + +#define mx28_reg(name) \ + union { \ + struct { __mx28_reg(name) }; \ + struct mx28_register name##_reg; \ + }; + +#endif /* __MX28_REGS_COMMON_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/regs-gpmi.h b/arch/arm/include/asm/arch-mx28/regs-gpmi.h new file mode 100644 index 000000000..00967938f --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/regs-gpmi.h @@ -0,0 +1,222 @@ +/* + * Freescale i.MX28 GPMI Register Definitions + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __MX28_REGS_GPMI_H__ +#define __MX28_REGS_GPMI_H__ + +#include <asm/arch/regs-common.h> + +#ifndef __ASSEMBLY__ +struct mx28_gpmi_regs { + mx28_reg(hw_gpmi_ctrl0) + mx28_reg(hw_gpmi_compare) + mx28_reg(hw_gpmi_eccctrl) + mx28_reg(hw_gpmi_ecccount) + mx28_reg(hw_gpmi_payload) + mx28_reg(hw_gpmi_auxiliary) + mx28_reg(hw_gpmi_ctrl1) + mx28_reg(hw_gpmi_timing0) + mx28_reg(hw_gpmi_timing1) + + uint32_t reserved[4]; + + mx28_reg(hw_gpmi_data) + mx28_reg(hw_gpmi_stat) + mx28_reg(hw_gpmi_debug) + mx28_reg(hw_gpmi_version) +}; +#endif + +#define GPMI_CTRL0_SFTRST (1 << 31) +#define GPMI_CTRL0_CLKGATE (1 << 30) +#define GPMI_CTRL0_RUN (1 << 29) +#define GPMI_CTRL0_DEV_IRQ_EN (1 << 28) +#define GPMI_CTRL0_LOCK_CS (1 << 27) +#define GPMI_CTRL0_UDMA (1 << 26) +#define GPMI_CTRL0_COMMAND_MODE_MASK (0x3 << 24) +#define GPMI_CTRL0_COMMAND_MODE_OFFSET 24 +#define GPMI_CTRL0_COMMAND_MODE_WRITE (0x0 << 24) +#define GPMI_CTRL0_COMMAND_MODE_READ (0x1 << 24) +#define GPMI_CTRL0_COMMAND_MODE_READ_AND_COMPARE (0x2 << 24) +#define GPMI_CTRL0_COMMAND_MODE_WAIT_FOR_READY (0x3 << 24) +#define GPMI_CTRL0_WORD_LENGTH (1 << 23) +#define GPMI_CTRL0_CS_MASK (0x7 << 20) +#define GPMI_CTRL0_CS_OFFSET 20 +#define GPMI_CTRL0_ADDRESS_MASK (0x7 << 17) +#define GPMI_CTRL0_ADDRESS_OFFSET 17 +#define GPMI_CTRL0_ADDRESS_NAND_DATA (0x0 << 17) +#define GPMI_CTRL0_ADDRESS_NAND_CLE (0x1 << 17) +#define GPMI_CTRL0_ADDRESS_NAND_ALE (0x2 << 17) +#define GPMI_CTRL0_ADDRESS_INCREMENT (1 << 16) +#define GPMI_CTRL0_XFER_COUNT_MASK 0xffff +#define GPMI_CTRL0_XFER_COUNT_OFFSET 0 + +#define GPMI_COMPARE_MASK_MASK (0xffff << 16) +#define GPMI_COMPARE_MASK_OFFSET 16 +#define GPMI_COMPARE_REFERENCE_MASK 0xffff +#define GPMI_COMPARE_REFERENCE_OFFSET 0 + +#define GPMI_ECCCTRL_HANDLE_MASK (0xffff << 16) +#define GPMI_ECCCTRL_HANDLE_OFFSET 16 +#define GPMI_ECCCTRL_ECC_CMD_MASK (0x3 << 13) +#define GPMI_ECCCTRL_ECC_CMD_OFFSET 13 +#define GPMI_ECCCTRL_ECC_CMD_DECODE (0x0 << 13) +#define GPMI_ECCCTRL_ECC_CMD_ENCODE (0x1 << 13) +#define GPMI_ECCCTRL_ENABLE_ECC (1 << 12) +#define GPMI_ECCCTRL_BUFFER_MASK_MASK 0x1ff +#define GPMI_ECCCTRL_BUFFER_MASK_OFFSET 0 +#define GPMI_ECCCTRL_BUFFER_MASK_BCH_AUXONLY 0x100 +#define GPMI_ECCCTRL_BUFFER_MASK_BCH_PAGE 0x1ff + +#define GPMI_ECCCOUNT_COUNT_MASK 0xffff +#define GPMI_ECCCOUNT_COUNT_OFFSET 0 + +#define GPMI_PAYLOAD_ADDRESS_MASK (0x3fffffff << 2) +#define GPMI_PAYLOAD_ADDRESS_OFFSET 2 + +#define GPMI_AUXILIARY_ADDRESS_MASK (0x3fffffff << 2) +#define GPMI_AUXILIARY_ADDRESS_OFFSET 2 + +#define GPMI_CTRL1_DECOUPLE_CS (1 << 24) +#define GPMI_CTRL1_WRN_DLY_SEL_MASK (0x3 << 22) +#define GPMI_CTRL1_WRN_DLY_SEL_OFFSET 22 +#define GPMI_CTRL1_TIMEOUT_IRQ_EN (1 << 20) +#define GPMI_CTRL1_GANGED_RDYBUSY (1 << 19) +#define GPMI_CTRL1_BCH_MODE (1 << 18) +#define GPMI_CTRL1_DLL_ENABLE (1 << 17) +#define GPMI_CTRL1_HALF_PERIOD (1 << 16) +#define GPMI_CTRL1_RDN_DELAY_MASK (0xf << 12) +#define GPMI_CTRL1_RDN_DELAY_OFFSET 12 +#define GPMI_CTRL1_DMA2ECC_MODE (1 << 11) +#define GPMI_CTRL1_DEV_IRQ (1 << 10) +#define GPMI_CTRL1_TIMEOUT_IRQ (1 << 9) +#define GPMI_CTRL1_BURST_EN (1 << 8) +#define GPMI_CTRL1_ABORT_WAIT_REQUEST (1 << 7) +#define GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL_MASK (0x7 << 4) +#define GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL_OFFSET 4 +#define GPMI_CTRL1_DEV_RESET (1 << 3) +#define GPMI_CTRL1_ATA_IRQRDY_POLARITY (1 << 2) +#define GPMI_CTRL1_CAMERA_MODE (1 << 1) +#define GPMI_CTRL1_GPMI_MODE (1 << 0) + +#define GPMI_TIMING0_ADDRESS_SETUP_MASK (0xff << 16) +#define GPMI_TIMING0_ADDRESS_SETUP_OFFSET 16 +#define GPMI_TIMING0_DATA_HOLD_MASK (0xff << 8) +#define GPMI_TIMING0_DATA_HOLD_OFFSET 8 +#define GPMI_TIMING0_DATA_SETUP_MASK 0xff +#define GPMI_TIMING0_DATA_SETUP_OFFSET 0 + +#define GPMI_TIMING1_DEVICE_BUSY_TIMEOUT_MASK (0xffff << 16) +#define GPMI_TIMING1_DEVICE_BUSY_TIMEOUT_OFFSET 16 + +#define GPMI_TIMING2_UDMA_TRP_MASK (0xff << 24) +#define GPMI_TIMING2_UDMA_TRP_OFFSET 24 +#define GPMI_TIMING2_UDMA_ENV_MASK (0xff << 16) +#define GPMI_TIMING2_UDMA_ENV_OFFSET 16 +#define GPMI_TIMING2_UDMA_HOLD_MASK (0xff << 8) +#define GPMI_TIMING2_UDMA_HOLD_OFFSET 8 +#define GPMI_TIMING2_UDMA_SETUP_MASK 0xff +#define GPMI_TIMING2_UDMA_SETUP_OFFSET 0 + +#define GPMI_DATA_DATA_MASK 0xffffffff +#define GPMI_DATA_DATA_OFFSET 0 + +#define GPMI_STAT_READY_BUSY_MASK (0xff << 24) +#define GPMI_STAT_READY_BUSY_OFFSET 24 +#define GPMI_STAT_RDY_TIMEOUT_MASK (0xff << 16) +#define GPMI_STAT_RDY_TIMEOUT_OFFSET 16 +#define GPMI_STAT_DEV7_ERROR (1 << 15) +#define GPMI_STAT_DEV6_ERROR (1 << 14) +#define GPMI_STAT_DEV5_ERROR (1 << 13) +#define GPMI_STAT_DEV4_ERROR (1 << 12) +#define GPMI_STAT_DEV3_ERROR (1 << 11) +#define GPMI_STAT_DEV2_ERROR (1 << 10) +#define GPMI_STAT_DEV1_ERROR (1 << 9) +#define GPMI_STAT_DEV0_ERROR (1 << 8) +#define GPMI_STAT_ATA_IRQ (1 << 4) +#define GPMI_STAT_INVALID_BUFFER_MASK (1 << 3) +#define GPMI_STAT_FIFO_EMPTY (1 << 2) +#define GPMI_STAT_FIFO_FULL (1 << 1) +#define GPMI_STAT_PRESENT (1 << 0) + +#define GPMI_DEBUG_WAIT_FOR_READY_END_MASK (0xff << 24) +#define GPMI_DEBUG_WAIT_FOR_READY_END_OFFSET 24 +#define GPMI_DEBUG_DMA_SENSE_MASK (0xff << 16) +#define GPMI_DEBUG_DMA_SENSE_OFFSET 16 +#define GPMI_DEBUG_DMAREQ_MASK (0xff << 8) +#define GPMI_DEBUG_DMAREQ_OFFSET 8 +#define GPMI_DEBUG_CMD_END_MASK 0xff +#define GPMI_DEBUG_CMD_END_OFFSET 0 + +#define GPMI_VERSION_MAJOR_MASK (0xff << 24) +#define GPMI_VERSION_MAJOR_OFFSET 24 +#define GPMI_VERSION_MINOR_MASK (0xff << 16) +#define GPMI_VERSION_MINOR_OFFSET 16 +#define GPMI_VERSION_STEP_MASK 0xffff +#define GPMI_VERSION_STEP_OFFSET 0 + +#define GPMI_DEBUG2_UDMA_STATE_MASK (0xf << 24) +#define GPMI_DEBUG2_UDMA_STATE_OFFSET 24 +#define GPMI_DEBUG2_BUSY (1 << 23) +#define GPMI_DEBUG2_PIN_STATE_MASK (0x7 << 20) +#define GPMI_DEBUG2_PIN_STATE_OFFSET 20 +#define GPMI_DEBUG2_PIN_STATE_PSM_IDLE (0x0 << 20) +#define GPMI_DEBUG2_PIN_STATE_PSM_BYTCNT (0x1 << 20) +#define GPMI_DEBUG2_PIN_STATE_PSM_ADDR (0x2 << 20) +#define GPMI_DEBUG2_PIN_STATE_PSM_STALL (0x3 << 20) +#define GPMI_DEBUG2_PIN_STATE_PSM_STROBE (0x4 << 20) +#define GPMI_DEBUG2_PIN_STATE_PSM_ATARDY (0x5 << 20) +#define GPMI_DEBUG2_PIN_STATE_PSM_DHOLD (0x6 << 20) +#define GPMI_DEBUG2_PIN_STATE_PSM_DONE (0x7 << 20) +#define GPMI_DEBUG2_MAIN_STATE_MASK (0xf << 16) +#define GPMI_DEBUG2_MAIN_STATE_OFFSET 16 +#define GPMI_DEBUG2_MAIN_STATE_MSM_IDLE (0x0 << 16) +#define GPMI_DEBUG2_MAIN_STATE_MSM_BYTCNT (0x1 << 16) +#define GPMI_DEBUG2_MAIN_STATE_MSM_WAITFE (0x2 << 16) +#define GPMI_DEBUG2_MAIN_STATE_MSM_WAITFR (0x3 << 16) +#define GPMI_DEBUG2_MAIN_STATE_MSM_DMAREQ (0x4 << 16) +#define GPMI_DEBUG2_MAIN_STATE_MSM_DMAACK (0x5 << 16) +#define GPMI_DEBUG2_MAIN_STATE_MSM_WAITFF (0x6 << 16) +#define GPMI_DEBUG2_MAIN_STATE_MSM_LDFIFO (0x7 << 16) +#define GPMI_DEBUG2_MAIN_STATE_MSM_LDDMAR (0x8 << 16) +#define GPMI_DEBUG2_MAIN_STATE_MSM_RDCMP (0x9 << 16) +#define GPMI_DEBUG2_MAIN_STATE_MSM_DONE (0xa << 16) +#define GPMI_DEBUG2_SYND2GPMI_BE_MASK (0xf << 12) +#define GPMI_DEBUG2_SYND2GPMI_BE_OFFSET 12 +#define GPMI_DEBUG2_GPMI2SYND_VALID (1 << 11) +#define GPMI_DEBUG2_GPMI2SYND_READY (1 << 10) +#define GPMI_DEBUG2_SYND2GPMI_VALID (1 << 9) +#define GPMI_DEBUG2_SYND2GPMI_READY (1 << 8) +#define GPMI_DEBUG2_VIEW_DELAYED_RDN (1 << 7) +#define GPMI_DEBUG2_UPDATE_WINDOW (1 << 6) +#define GPMI_DEBUG2_RDN_TAP_MASK 0x3f +#define GPMI_DEBUG2_RDN_TAP_OFFSET 0 + +#define GPMI_DEBUG3_APB_WORD_CNTR_MASK (0xffff << 16) +#define GPMI_DEBUG3_APB_WORD_CNTR_OFFSET 16 +#define GPMI_DEBUG3_DEV_WORD_CNTR_MASK 0xffff +#define GPMI_DEBUG3_DEV_WORD_CNTR_OFFSET 0 + +#endif /* __MX28_REGS_GPMI_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/regs-i2c.h b/arch/arm/include/asm/arch-mx28/regs-i2c.h new file mode 100644 index 000000000..30e0ed743 --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/regs-i2c.h @@ -0,0 +1,207 @@ +/* + * Freescale i.MX28 I2C Register Definitions + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __MX28_REGS_I2C_H__ +#define __MX28_REGS_I2C_H__ + +#include <asm/arch/regs-common.h> + +#ifndef __ASSEMBLY__ +struct mx28_i2c_regs { + mx28_reg(hw_i2c_ctrl0) + mx28_reg(hw_i2c_timing0) + mx28_reg(hw_i2c_timing1) + mx28_reg(hw_i2c_timing2) + mx28_reg(hw_i2c_ctrl1) + mx28_reg(hw_i2c_stat) + mx28_reg(hw_i2c_queuectrl) + mx28_reg(hw_i2c_queuestat) + mx28_reg(hw_i2c_queuecmd) + mx28_reg(hw_i2c_queuedata) + mx28_reg(hw_i2c_data) + mx28_reg(hw_i2c_debug0) + mx28_reg(hw_i2c_debug1) + mx28_reg(hw_i2c_version) +}; +#endif + +#define I2C_CTRL_SFTRST (1 << 31) +#define I2C_CTRL_CLKGATE (1 << 30) +#define I2C_CTRL_RUN (1 << 29) +#define I2C_CTRL_PREACK (1 << 27) +#define I2C_CTRL_ACKNOWLEDGE (1 << 26) +#define I2C_CTRL_SEND_NAK_ON_LAST (1 << 25) +#define I2C_CTRL_MULTI_MASTER (1 << 23) +#define I2C_CTRL_CLOCK_HELD (1 << 22) +#define I2C_CTRL_RETAIN_CLOCK (1 << 21) +#define I2C_CTRL_POST_SEND_STOP (1 << 20) +#define I2C_CTRL_PRE_SEND_START (1 << 19) +#define I2C_CTRL_SLAVE_ADDRESS_ENABLE (1 << 18) +#define I2C_CTRL_MASTER_MODE (1 << 17) +#define I2C_CTRL_DIRECTION (1 << 16) +#define I2C_CTRL_XFER_COUNT_MASK 0xffff +#define I2C_CTRL_XFER_COUNT_OFFSET 0 + +#define I2C_TIMING0_HIGH_COUNT_MASK (0x3ff << 16) +#define I2C_TIMING0_HIGH_COUNT_OFFSET 16 +#define I2C_TIMING0_RCV_COUNT_MASK 0x3ff +#define I2C_TIMING0_RCV_COUNT_OFFSET 0 + +#define I2C_TIMING1_LOW_COUNT_MASK (0x3ff << 16) +#define I2C_TIMING1_LOW_COUNT_OFFSET 16 +#define I2C_TIMING1_XMIT_COUNT_MASK 0x3ff +#define I2C_TIMING1_XMIT_COUNT_OFFSET 0 + +#define I2C_TIMING2_BUS_FREE_MASK (0x3ff << 16) +#define I2C_TIMING2_BUS_FREE_OFFSET 16 +#define I2C_TIMING2_LEADIN_COUNT_MASK 0x3ff +#define I2C_TIMING2_LEADIN_COUNT_OFFSET 0 + +#define I2C_CTRL1_RD_QUEUE_IRQ (1 << 30) +#define I2C_CTRL1_WR_QUEUE_IRQ (1 << 29) +#define I2C_CTRL1_CLR_GOT_A_NAK (1 << 28) +#define I2C_CTRL1_ACK_MODE (1 << 27) +#define I2C_CTRL1_FORCE_DATA_IDLE (1 << 26) +#define I2C_CTRL1_FORCE_CLK_IDLE (1 << 25) +#define I2C_CTRL1_BCAST_SLAVE_EN (1 << 24) +#define I2C_CTRL1_SLAVE_ADDRESS_BYTE_MASK (0xff << 16) +#define I2C_CTRL1_SLAVE_ADDRESS_BYTE_OFFSET 16 +#define I2C_CTRL1_BUS_FREE_IRQ_EN (1 << 15) +#define I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ_EN (1 << 14) +#define I2C_CTRL1_NO_SLAVE_ACK_IRQ_EN (1 << 13) +#define I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ_EN (1 << 12) +#define I2C_CTRL1_EARLY_TERM_IRQ_EN (1 << 11) +#define I2C_CTRL1_MASTER_LOSS_IRQ_EN (1 << 10) +#define I2C_CTRL1_SLAVE_STOP_IRQ_EN (1 << 9) +#define I2C_CTRL1_SLAVE_IRQ_EN (1 << 8) +#define I2C_CTRL1_BUS_FREE_IRQ (1 << 7) +#define I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ (1 << 6) +#define I2C_CTRL1_NO_SLAVE_ACK_IRQ (1 << 5) +#define I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ (1 << 4) +#define I2C_CTRL1_EARLY_TERM_IRQ (1 << 3) +#define I2C_CTRL1_MASTER_LOSS_IRQ (1 << 2) +#define I2C_CTRL1_SLAVE_STOP_IRQ (1 << 1) +#define I2C_CTRL1_SLAVE_IRQ (1 << 0) + +#define I2C_STAT_MASTER_PRESENT (1 << 31) +#define I2C_STAT_SLAVE_PRESENT (1 << 30) +#define I2C_STAT_ANY_ENABLED_IRQ (1 << 29) +#define I2C_STAT_GOT_A_NAK (1 << 28) +#define I2C_STAT_RCVD_SLAVE_ADDR_MASK (0xff << 16) +#define I2C_STAT_RCVD_SLAVE_ADDR_OFFSET 16 +#define I2C_STAT_SLAVE_ADDR_EQ_ZERO (1 << 15) +#define I2C_STAT_SLAVE_FOUND (1 << 14) +#define I2C_STAT_SLAVE_SEARCHING (1 << 13) +#define I2C_STAT_DATA_ENGING_DMA_WAIT (1 << 12) +#define I2C_STAT_BUS_BUSY (1 << 11) +#define I2C_STAT_CLK_GEN_BUSY (1 << 10) +#define I2C_STAT_DATA_ENGINE_BUSY (1 << 9) +#define I2C_STAT_SLAVE_BUSY (1 << 8) +#define I2C_STAT_BUS_FREE_IRQ_SUMMARY (1 << 7) +#define I2C_STAT_DATA_ENGINE_CMPLT_IRQ_SUMMARY (1 << 6) +#define I2C_STAT_NO_SLAVE_ACK_IRQ_SUMMARY (1 << 5) +#define I2C_STAT_OVERSIZE_XFER_TERM_IRQ_SUMMARY (1 << 4) +#define I2C_STAT_EARLY_TERM_IRQ_SUMMARY (1 << 3) +#define I2C_STAT_MASTER_LOSS_IRQ_SUMMARY (1 << 2) +#define I2C_STAT_SLAVE_STOP_IRQ_SUMMARY (1 << 1) +#define I2C_STAT_SLAVE_IRQ_SUMMARY (1 << 0) + +#define I2C_QUEUECTRL_RD_THRESH_MASK (0x1f << 16) +#define I2C_QUEUECTRL_RD_THRESH_OFFSET 16 +#define I2C_QUEUECTRL_WR_THRESH_MASK (0x1f << 8) +#define I2C_QUEUECTRL_WR_THRESH_OFFSET 8 +#define I2C_QUEUECTRL_QUEUE_RUN (1 << 5) +#define I2C_QUEUECTRL_RD_CLEAR (1 << 4) +#define I2C_QUEUECTRL_WR_CLEAR (1 << 3) +#define I2C_QUEUECTRL_PIO_QUEUE_MODE (1 << 2) +#define I2C_QUEUECTRL_RD_QUEUE_IRQ_EN (1 << 1) +#define I2C_QUEUECTRL_WR_QUEUE_IRQ_EN (1 << 0) + +#define I2C_QUEUESTAT_RD_QUEUE_FULL (1 << 14) +#define I2C_QUEUESTAT_RD_QUEUE_EMPTY (1 << 13) +#define I2C_QUEUESTAT_RD_QUEUE_CNT_MASK (0x1f << 8) +#define I2C_QUEUESTAT_RD_QUEUE_CNT_OFFSET 8 +#define I2C_QUEUESTAT_WR_QUEUE_FULL (1 << 6) +#define I2C_QUEUESTAT_WR_QUEUE_EMPTY (1 << 5) +#define I2C_QUEUESTAT_WR_QUEUE_CNT_MASK 0x1f +#define I2C_QUEUESTAT_WR_QUEUE_CNT_OFFSET 0 + +#define I2C_QUEUECMD_PREACK (1 << 27) +#define I2C_QUEUECMD_ACKNOWLEDGE (1 << 26) +#define I2C_QUEUECMD_SEND_NAK_ON_LAST (1 << 25) +#define I2C_QUEUECMD_MULTI_MASTER (1 << 23) +#define I2C_QUEUECMD_CLOCK_HELD (1 << 22) +#define I2C_QUEUECMD_RETAIN_CLOCK (1 << 21) +#define I2C_QUEUECMD_POST_SEND_STOP (1 << 20) +#define I2C_QUEUECMD_PRE_SEND_START (1 << 19) +#define I2C_QUEUECMD_SLAVE_ADDRESS_ENABLE (1 << 18) +#define I2C_QUEUECMD_MASTER_MODE (1 << 17) +#define I2C_QUEUECMD_DIRECTION (1 << 16) +#define I2C_QUEUECMD_XFER_COUNT_MASK 0xffff +#define I2C_QUEUECMD_XFER_COUNT_OFFSET 0 + +#define I2C_QUEUEDATA_DATA_MASK 0xffffffff +#define I2C_QUEUEDATA_DATA_OFFSET 0 + +#define I2C_DATA_DATA_MASK 0xffffffff +#define I2C_DATA_DATA_OFFSET 0 + +#define I2C_DEBUG0_DMAREQ (1 << 31) +#define I2C_DEBUG0_DMAENDCMD (1 << 30) +#define I2C_DEBUG0_DMAKICK (1 << 29) +#define I2C_DEBUG0_DMATERMINATE (1 << 28) +#define I2C_DEBUG0_STATE_VALUE_MASK (0x3 << 26) +#define I2C_DEBUG0_STATE_VALUE_OFFSET 26 +#define I2C_DEBUG0_DMA_STATE_MASK (0x3ff << 16) +#define I2C_DEBUG0_DMA_STATE_OFFSET 16 +#define I2C_DEBUG0_START_TOGGLE (1 << 15) +#define I2C_DEBUG0_STOP_TOGGLE (1 << 14) +#define I2C_DEBUG0_GRAB_TOGGLE (1 << 13) +#define I2C_DEBUG0_CHANGE_TOGGLE (1 << 12) +#define I2C_DEBUG0_STATE_LATCH (1 << 11) +#define I2C_DEBUG0_SLAVE_HOLD_CLK (1 << 10) +#define I2C_DEBUG0_STATE_STATE_MASK 0x3ff +#define I2C_DEBUG0_STATE_STATE_OFFSET 0 + +#define I2C_DEBUG1_I2C_CLK_IN (1 << 31) +#define I2C_DEBUG1_I2C_DATA_IN (1 << 30) +#define I2C_DEBUG1_DMA_BYTE_ENABLES_MASK (0xf << 24) +#define I2C_DEBUG1_DMA_BYTE_ENABLES_OFFSET 24 +#define I2C_DEBUG1_CLK_GEN_STATE_MASK (0xff << 16) +#define I2C_DEBUG1_CLK_GEN_STATE_OFFSET 16 +#define I2C_DEBUG1_LST_MODE_MASK (0x3 << 9) +#define I2C_DEBUG1_LST_MODE_OFFSET 9 +#define I2C_DEBUG1_LOCAL_SLAVE_TEST (1 << 8) +#define I2C_DEBUG1_FORCE_CLK_ON (1 << 4) +#define I2C_DEBUG1_FORCE_ABR_LOSS (1 << 3) +#define I2C_DEBUG1_FORCE_RCV_ACK (1 << 2) +#define I2C_DEBUG1_FORCE_I2C_DATA_OE (1 << 1) +#define I2C_DEBUG1_FORCE_I2C_CLK_OE (1 << 0) + +#define I2C_VERSION_MAJOR_MASK (0xff << 24) +#define I2C_VERSION_MAJOR_OFFSET 24 +#define I2C_VERSION_MINOR_MASK (0xff << 16) +#define I2C_VERSION_MINOR_OFFSET 16 +#define I2C_VERSION_STEP_MASK 0xffff +#define I2C_VERSION_STEP_OFFSET 0 + +#endif /* __MX28_REGS_I2C_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/regs-ocotp.h b/arch/arm/include/asm/arch-mx28/regs-ocotp.h new file mode 100644 index 000000000..ea2fd7b16 --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/regs-ocotp.h @@ -0,0 +1,173 @@ +/* + * Freescale i.MX28 OCOTP Register Definitions + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __MX28_REGS_OCOTP_H__ +#define __MX28_REGS_OCOTP_H__ + +#include <asm/arch/regs-common.h> + +#ifndef __ASSEMBLY__ +struct mx28_ocotp_regs { + mx28_reg(hw_ocotp_ctrl) /* 0x0 */ + mx28_reg(hw_ocotp_data) /* 0x10 */ + mx28_reg(hw_ocotp_cust0) /* 0x20 */ + mx28_reg(hw_ocotp_cust1) /* 0x30 */ + mx28_reg(hw_ocotp_cust2) /* 0x40 */ + mx28_reg(hw_ocotp_cust3) /* 0x50 */ + mx28_reg(hw_ocotp_crypto0) /* 0x60 */ + mx28_reg(hw_ocotp_crypto1) /* 0x70 */ + mx28_reg(hw_ocotp_crypto2) /* 0x80 */ + mx28_reg(hw_ocotp_crypto3) /* 0x90 */ + mx28_reg(hw_ocotp_hwcap0) /* 0xa0 */ + mx28_reg(hw_ocotp_hwcap1) /* 0xb0 */ + mx28_reg(hw_ocotp_hwcap2) /* 0xc0 */ + mx28_reg(hw_ocotp_hwcap3) /* 0xd0 */ + mx28_reg(hw_ocotp_hwcap4) /* 0xe0 */ + mx28_reg(hw_ocotp_hwcap5) /* 0xf0 */ + mx28_reg(hw_ocotp_swcap) /* 0x100 */ + mx28_reg(hw_ocotp_custcap) /* 0x110 */ + mx28_reg(hw_ocotp_lock) /* 0x120 */ + mx28_reg(hw_ocotp_ops0) /* 0x130 */ + mx28_reg(hw_ocotp_ops1) /* 0x140 */ + mx28_reg(hw_ocotp_ops2) /* 0x150 */ + mx28_reg(hw_ocotp_ops3) /* 0x160 */ + mx28_reg(hw_ocotp_un0) /* 0x170 */ + mx28_reg(hw_ocotp_un1) /* 0x180 */ + mx28_reg(hw_ocotp_un2) /* 0x190 */ + mx28_reg(hw_ocotp_rom0) /* 0x1a0 */ + mx28_reg(hw_ocotp_rom1) /* 0x1b0 */ + mx28_reg(hw_ocotp_rom2) /* 0x1c0 */ + mx28_reg(hw_ocotp_rom3) /* 0x1d0 */ + mx28_reg(hw_ocotp_rom4) /* 0x1e0 */ + mx28_reg(hw_ocotp_rom5) /* 0x1f0 */ + mx28_reg(hw_ocotp_rom6) /* 0x200 */ + mx28_reg(hw_ocotp_rom7) /* 0x210 */ + mx28_reg(hw_ocotp_srk0) /* 0x220 */ + mx28_reg(hw_ocotp_srk1) /* 0x230 */ + mx28_reg(hw_ocotp_srk2) /* 0x240 */ + mx28_reg(hw_ocotp_srk3) /* 0x250 */ + mx28_reg(hw_ocotp_srk4) /* 0x260 */ + mx28_reg(hw_ocotp_srk5) /* 0x270 */ + mx28_reg(hw_ocotp_srk6) /* 0x280 */ + mx28_reg(hw_ocotp_srk7) /* 0x290 */ + mx28_reg(hw_ocotp_version) /* 0x2a0 */ +}; +#endif + +#define OCOTP_CTRL_WR_UNLOCK_MASK (0xffff << 16) +#define OCOTP_CTRL_WR_UNLOCK_OFFSET 16 +#define OCOTP_CTRL_WR_UNLOCK_KEY (0x3e77 << 16) +#define OCOTP_CTRL_RELOAD_SHADOWS (1 << 13) +#define OCOTP_CTRL_RD_BANK_OPEN (1 << 12) +#define OCOTP_CTRL_ERROR (1 << 9) +#define OCOTP_CTRL_BUSY (1 << 8) +#define OCOTP_CTRL_ADDR_MASK 0x3f +#define OCOTP_CTRL_ADDR_OFFSET 0 + +#define OCOTP_DATA_DATA_MASK 0xffffffff +#define OCOTP_DATA_DATA_OFFSET 0 + +#define OCOTP_CUST_BITS_MASK 0xffffffff +#define OCOTP_CUST_BITS_OFFSET 0 + +#define OCOTP_CRYPTO_BITS_MASK 0xffffffff +#define OCOTP_CRYPTO_BITS_OFFSET 0 + +#define OCOTP_HWCAP_BITS_MASK 0xffffffff +#define OCOTP_HWCAP_BITS_OFFSET 0 + +#define OCOTP_SWCAP_BITS_MASK 0xffffffff +#define OCOTP_SWCAP_BITS_OFFSET 0 + +#define OCOTP_CUSTCAP_RTC_XTAL_32768_PRESENT (1 << 2) +#define OCOTP_CUSTCAP_RTC_XTAL_32000_PRESENT (1 << 1) + +#define OCOTP_LOCK_ROM7 (1 << 31) +#define OCOTP_LOCK_ROM6 (1 << 30) +#define OCOTP_LOCK_ROM5 (1 << 29) +#define OCOTP_LOCK_ROM4 (1 << 28) +#define OCOTP_LOCK_ROM3 (1 << 27) +#define OCOTP_LOCK_ROM2 (1 << 26) +#define OCOTP_LOCK_ROM1 (1 << 25) +#define OCOTP_LOCK_ROM0 (1 << 24) +#define OCOTP_LOCK_HWSW_SHADOW_ALT (1 << 23) +#define OCOTP_LOCK_CRYPTODCP_ALT (1 << 22) +#define OCOTP_LOCK_CRYPTOKEY_ALT (1 << 21) +#define OCOTP_LOCK_PIN (1 << 20) +#define OCOTP_LOCK_OPS (1 << 19) +#define OCOTP_LOCK_UN2 (1 << 18) +#define OCOTP_LOCK_UN1 (1 << 17) +#define OCOTP_LOCK_UN0 (1 << 16) +#define OCOTP_LOCK_SRK (1 << 15) +#define OCOTP_LOCK_UNALLOCATED_MASK (0x7 << 12) +#define OCOTP_LOCK_UNALLOCATED_OFFSET 12 +#define OCOTP_LOCK_SRK_SHADOW (1 << 11) +#define OCOTP_LOCK_ROM_SHADOW (1 << 10) +#define OCOTP_LOCK_CUSTCAP (1 << 9) +#define OCOTP_LOCK_HWSW (1 << 8) +#define OCOTP_LOCK_CUSTCAP_SHADOW (1 << 7) +#define OCOTP_LOCK_HWSW_SHADOW (1 << 6) +#define OCOTP_LOCK_CRYPTODCP (1 << 5) +#define OCOTP_LOCK_CRYPTOKEY (1 << 4) +#define OCOTP_LOCK_CUST3 (1 << 3) +#define OCOTP_LOCK_CUST2 (1 << 2) +#define OCOTP_LOCK_CUST1 (1 << 1) +#define OCOTP_LOCK_CUST0 (1 << 0) + +#define OCOTP_OPS_BITS_MASK 0xffffffff +#define OCOTP_OPS_BITS_OFFSET 0 + +#define OCOTP_UN_BITS_MASK 0xffffffff +#define OCOTP_UN_BITS_OFFSET 0 + +#define OCOTP_ROM_BOOT_MODE_MASK (0xff << 24) +#define OCOTP_ROM_BOOT_MODE_OFFSET 24 +#define OCOTP_ROM_SD_MMC_MODE_MASK (0x3 << 22) +#define OCOTP_ROM_SD_MMC_MODE_OFFSET 22 +#define OCOTP_ROM_SD_POWER_GATE_GPIO_MASK (0x3 << 20) +#define OCOTP_ROM_SD_POWER_GATE_GPIO_OFFSET 20 +#define OCOTP_ROM_SD_POWER_UP_DELAY_MASK (0x3f << 14) +#define OCOTP_ROM_SD_POWER_UP_DELAY_OFFSET 14 +#define OCOTP_ROM_SD_BUS_WIDTH_MASK (0x3 << 12) +#define OCOTP_ROM_SD_BUS_WIDTH_OFFSET 12 +#define OCOTP_ROM_SSP_SCK_INDEX_MASK (0xf << 8) +#define OCOTP_ROM_SSP_SCK_INDEX_OFFSET 8 +#define OCOTP_ROM_EMMC_USE_DDR (1 << 7) +#define OCOTP_ROM_DISABLE_SPI_NOR_FAST_READ (1 << 6) +#define OCOTP_ROM_ENABLE_USB_BOOT_SERIAL_NUM (1 << 5) +#define OCOTP_ROM_ENABLE_UNENCRYPTED_BOOT (1 << 4) +#define OCOTP_ROM_SD_MBR_BOOT (1 << 3) + +#define OCOTP_SRK_BITS_MASK 0xffffffff +#define OCOTP_SRK_BITS_OFFSET 0 + +#define OCOTP_VERSION_MAJOR_MASK (0xff << 24) +#define OCOTP_VERSION_MAJOR_OFFSET 24 +#define OCOTP_VERSION_MINOR_MASK (0xff << 16) +#define OCOTP_VERSION_MINOR_OFFSET 16 +#define OCOTP_VERSION_STEP_MASK 0xffff +#define OCOTP_VERSION_STEP_OFFSET 0 + +#endif /* __MX28_REGS_OCOTP_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/regs-pinctrl.h b/arch/arm/include/asm/arch-mx28/regs-pinctrl.h new file mode 100644 index 000000000..73739cad5 --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/regs-pinctrl.h @@ -0,0 +1,1284 @@ +/* + * Freescale i.MX28 PINCTRL Register Definitions + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __MX28_REGS_PINCTRL_H__ +#define __MX28_REGS_PINCTRL_H__ + +#include <asm/arch/regs-common.h> + +#ifndef __ASSEMBLY__ +struct mx28_pinctrl_regs { + mx28_reg(hw_pinctrl_ctrl) /* 0x0 */ + + uint32_t reserved1[60]; + + mx28_reg(hw_pinctrl_muxsel0) /* 0x100 */ + mx28_reg(hw_pinctrl_muxsel1) /* 0x110 */ + mx28_reg(hw_pinctrl_muxsel2) /* 0x120 */ + mx28_reg(hw_pinctrl_muxsel3) /* 0x130 */ + mx28_reg(hw_pinctrl_muxsel4) /* 0x140 */ + mx28_reg(hw_pinctrl_muxsel5) /* 0x150 */ + mx28_reg(hw_pinctrl_muxsel6) /* 0x160 */ + mx28_reg(hw_pinctrl_muxsel7) /* 0x170 */ + mx28_reg(hw_pinctrl_muxsel8) /* 0x180 */ + mx28_reg(hw_pinctrl_muxsel9) /* 0x190 */ + mx28_reg(hw_pinctrl_muxsel10) /* 0x1a0 */ + mx28_reg(hw_pinctrl_muxsel11) /* 0x1b0 */ + mx28_reg(hw_pinctrl_muxsel12) /* 0x1c0 */ + mx28_reg(hw_pinctrl_muxsel13) /* 0x1d0 */ + + uint32_t reserved2[72]; + + mx28_reg(hw_pinctrl_drive0) /* 0x300 */ + mx28_reg(hw_pinctrl_drive1) /* 0x310 */ + mx28_reg(hw_pinctrl_drive2) /* 0x320 */ + mx28_reg(hw_pinctrl_drive3) /* 0x330 */ + mx28_reg(hw_pinctrl_drive4) /* 0x340 */ + mx28_reg(hw_pinctrl_drive5) /* 0x350 */ + mx28_reg(hw_pinctrl_drive6) /* 0x360 */ + mx28_reg(hw_pinctrl_drive7) /* 0x370 */ + mx28_reg(hw_pinctrl_drive8) /* 0x380 */ + mx28_reg(hw_pinctrl_drive9) /* 0x390 */ + mx28_reg(hw_pinctrl_drive10) /* 0x3a0 */ + mx28_reg(hw_pinctrl_drive11) /* 0x3b0 */ + mx28_reg(hw_pinctrl_drive12) /* 0x3c0 */ + mx28_reg(hw_pinctrl_drive13) /* 0x3d0 */ + mx28_reg(hw_pinctrl_drive14) /* 0x3e0 */ + mx28_reg(hw_pinctrl_drive15) /* 0x3f0 */ + mx28_reg(hw_pinctrl_drive16) /* 0x400 */ + mx28_reg(hw_pinctrl_drive17) /* 0x410 */ + mx28_reg(hw_pinctrl_drive18) /* 0x420 */ + mx28_reg(hw_pinctrl_drive19) /* 0x430 */ + + uint32_t reserved3[112]; + + mx28_reg(hw_pinctrl_pull0) /* 0x600 */ + mx28_reg(hw_pinctrl_pull1) /* 0x610 */ + mx28_reg(hw_pinctrl_pull2) /* 0x620 */ + mx28_reg(hw_pinctrl_pull3) /* 0x630 */ + mx28_reg(hw_pinctrl_pull4) /* 0x640 */ + mx28_reg(hw_pinctrl_pull5) /* 0x650 */ + mx28_reg(hw_pinctrl_pull6) /* 0x660 */ + + uint32_t reserved4[36]; + + mx28_reg(hw_pinctrl_dout0) /* 0x700 */ + mx28_reg(hw_pinctrl_dout1) /* 0x710 */ + mx28_reg(hw_pinctrl_dout2) /* 0x720 */ + mx28_reg(hw_pinctrl_dout3) /* 0x730 */ + mx28_reg(hw_pinctrl_dout4) /* 0x740 */ + + uint32_t reserved5[108]; + + mx28_reg(hw_pinctrl_din0) /* 0x900 */ + mx28_reg(hw_pinctrl_din1) /* 0x910 */ + mx28_reg(hw_pinctrl_din2) /* 0x920 */ + mx28_reg(hw_pinctrl_din3) /* 0x930 */ + mx28_reg(hw_pinctrl_din4) /* 0x940 */ + + uint32_t reserved6[108]; + + mx28_reg(hw_pinctrl_doe0) /* 0xb00 */ + mx28_reg(hw_pinctrl_doe1) /* 0xb10 */ + mx28_reg(hw_pinctrl_doe2) /* 0xb20 */ + mx28_reg(hw_pinctrl_doe3) /* 0xb30 */ + mx28_reg(hw_pinctrl_doe4) /* 0xb40 */ + + uint32_t reserved7[300]; + + mx28_reg(hw_pinctrl_pin2irq0) /* 0x1000 */ + mx28_reg(hw_pinctrl_pin2irq1) /* 0x1010 */ + mx28_reg(hw_pinctrl_pin2irq2) /* 0x1020 */ + mx28_reg(hw_pinctrl_pin2irq3) /* 0x1030 */ + mx28_reg(hw_pinctrl_pin2irq4) /* 0x1040 */ + + uint32_t reserved8[44]; + + mx28_reg(hw_pinctrl_irqen0) /* 0x1100 */ + mx28_reg(hw_pinctrl_irqen1) /* 0x1110 */ + mx28_reg(hw_pinctrl_irqen2) /* 0x1120 */ + mx28_reg(hw_pinctrl_irqen3) /* 0x1130 */ + mx28_reg(hw_pinctrl_irqen4) /* 0x1140 */ + + uint32_t reserved9[44]; + + mx28_reg(hw_pinctrl_irqlevel0) /* 0x1200 */ + mx28_reg(hw_pinctrl_irqlevel1) /* 0x1210 */ + mx28_reg(hw_pinctrl_irqlevel2) /* 0x1220 */ + mx28_reg(hw_pinctrl_irqlevel3) /* 0x1230 */ + mx28_reg(hw_pinctrl_irqlevel4) /* 0x1240 */ + + uint32_t reserved10[44]; + + mx28_reg(hw_pinctrl_irqpol0) /* 0x1300 */ + mx28_reg(hw_pinctrl_irqpol1) /* 0x1310 */ + mx28_reg(hw_pinctrl_irqpol2) /* 0x1320 */ + mx28_reg(hw_pinctrl_irqpol3) /* 0x1330 */ + mx28_reg(hw_pinctrl_irqpol4) /* 0x1340 */ + + uint32_t reserved11[44]; + + mx28_reg(hw_pinctrl_irqstat0) /* 0x1400 */ + mx28_reg(hw_pinctrl_irqstat1) /* 0x1410 */ + mx28_reg(hw_pinctrl_irqstat2) /* 0x1420 */ + mx28_reg(hw_pinctrl_irqstat3) /* 0x1430 */ + mx28_reg(hw_pinctrl_irqstat4) /* 0x1440 */ + + uint32_t reserved12[380]; + + mx28_reg(hw_pinctrl_emi_odt_ctrl) /* 0x1a40 */ + + uint32_t reserved13[76]; + + mx28_reg(hw_pinctrl_emi_ds_ctrl) /* 0x1b80 */ +}; +#endif + +#define PINCTRL_CTRL_SFTRST (1 << 31) +#define PINCTRL_CTRL_CLKGATE (1 << 30) +#define PINCTRL_CTRL_PRESENT4 (1 << 24) +#define PINCTRL_CTRL_PRESENT3 (1 << 23) +#define PINCTRL_CTRL_PRESENT2 (1 << 22) +#define PINCTRL_CTRL_PRESENT1 (1 << 21) +#define PINCTRL_CTRL_PRESENT0 (1 << 20) +#define PINCTRL_CTRL_IRQOUT4 (1 << 4) +#define PINCTRL_CTRL_IRQOUT3 (1 << 3) +#define PINCTRL_CTRL_IRQOUT2 (1 << 2) +#define PINCTRL_CTRL_IRQOUT1 (1 << 1) +#define PINCTRL_CTRL_IRQOUT0 (1 << 0) + +#define PINCTRL_MUXSEL0_BANK0_PIN07_MASK (0x3 << 14) +#define PINCTRL_MUXSEL0_BANK0_PIN07_OFFSET 14 +#define PINCTRL_MUXSEL0_BANK0_PIN06_MASK (0x3 << 12) +#define PINCTRL_MUXSEL0_BANK0_PIN06_OFFSET 12 +#define PINCTRL_MUXSEL0_BANK0_PIN05_MASK (0x3 << 10) +#define PINCTRL_MUXSEL0_BANK0_PIN05_OFFSET 10 +#define PINCTRL_MUXSEL0_BANK0_PIN04_MASK (0x3 << 8) +#define PINCTRL_MUXSEL0_BANK0_PIN04_OFFSET 8 +#define PINCTRL_MUXSEL0_BANK0_PIN03_MASK (0x3 << 6) +#define PINCTRL_MUXSEL0_BANK0_PIN03_OFFSET 6 +#define PINCTRL_MUXSEL0_BANK0_PIN02_MASK (0x3 << 4) +#define PINCTRL_MUXSEL0_BANK0_PIN02_OFFSET 4 +#define PINCTRL_MUXSEL0_BANK0_PIN01_MASK (0x3 << 2) +#define PINCTRL_MUXSEL0_BANK0_PIN01_OFFSET 2 +#define PINCTRL_MUXSEL0_BANK0_PIN00_MASK (0x3 << 0) +#define PINCTRL_MUXSEL0_BANK0_PIN00_OFFSET 0 + +#define PINCTRL_MUXSEL1_BANK0_PIN28_MASK (0x3 << 24) +#define PINCTRL_MUXSEL1_BANK0_PIN28_OFFSET 24 +#define PINCTRL_MUXSEL1_BANK0_PIN27_MASK (0x3 << 22) +#define PINCTRL_MUXSEL1_BANK0_PIN27_OFFSET 22 +#define PINCTRL_MUXSEL1_BANK0_PIN26_MASK (0x3 << 20) +#define PINCTRL_MUXSEL1_BANK0_PIN26_OFFSET 20 +#define PINCTRL_MUXSEL1_BANK0_PIN25_MASK (0x3 << 18) +#define PINCTRL_MUXSEL1_BANK0_PIN25_OFFSET 18 +#define PINCTRL_MUXSEL1_BANK0_PIN24_MASK (0x3 << 16) +#define PINCTRL_MUXSEL1_BANK0_PIN24_OFFSET 16 +#define PINCTRL_MUXSEL1_BANK0_PIN23_MASK (0x3 << 14) +#define PINCTRL_MUXSEL1_BANK0_PIN23_OFFSET 14 +#define PINCTRL_MUXSEL1_BANK0_PIN22_MASK (0x3 << 12) +#define PINCTRL_MUXSEL1_BANK0_PIN22_OFFSET 12 +#define PINCTRL_MUXSEL1_BANK0_PIN21_MASK (0x3 << 10) +#define PINCTRL_MUXSEL1_BANK0_PIN21_OFFSET 10 +#define PINCTRL_MUXSEL1_BANK0_PIN20_MASK (0x3 << 8) +#define PINCTRL_MUXSEL1_BANK0_PIN20_OFFSET 8 +#define PINCTRL_MUXSEL1_BANK0_PIN19_MASK (0x3 << 6) +#define PINCTRL_MUXSEL1_BANK0_PIN19_OFFSET 6 +#define PINCTRL_MUXSEL1_BANK0_PIN18_MASK (0x3 << 4) +#define PINCTRL_MUXSEL1_BANK0_PIN18_OFFSET 4 +#define PINCTRL_MUXSEL1_BANK0_PIN17_MASK (0x3 << 2) +#define PINCTRL_MUXSEL1_BANK0_PIN17_OFFSET 2 +#define PINCTRL_MUXSEL1_BANK0_PIN16_MASK (0x3 << 0) +#define PINCTRL_MUXSEL1_BANK0_PIN16_OFFSET 0 + +#define PINCTRL_MUXSEL2_BANK1_PIN15_MASK (0x3 << 30) +#define PINCTRL_MUXSEL2_BANK1_PIN15_OFFSET 30 +#define PINCTRL_MUXSEL2_BANK1_PIN14_MASK (0x3 << 28) +#define PINCTRL_MUXSEL2_BANK1_PIN14_OFFSET 28 +#define PINCTRL_MUXSEL2_BANK1_PIN13_MASK (0x3 << 26) +#define PINCTRL_MUXSEL2_BANK1_PIN13_OFFSET 26 +#define PINCTRL_MUXSEL2_BANK1_PIN12_MASK (0x3 << 24) +#define PINCTRL_MUXSEL2_BANK1_PIN12_OFFSET 24 +#define PINCTRL_MUXSEL2_BANK1_PIN11_MASK (0x3 << 22) +#define PINCTRL_MUXSEL2_BANK1_PIN11_OFFSET 22 +#define PINCTRL_MUXSEL2_BANK1_PIN10_MASK (0x3 << 20) +#define PINCTRL_MUXSEL2_BANK1_PIN10_OFFSET 20 +#define PINCTRL_MUXSEL2_BANK1_PIN09_MASK (0x3 << 18) +#define PINCTRL_MUXSEL2_BANK1_PIN09_OFFSET 18 +#define PINCTRL_MUXSEL2_BANK1_PIN08_MASK (0x3 << 16) +#define PINCTRL_MUXSEL2_BANK1_PIN08_OFFSET 16 +#define PINCTRL_MUXSEL2_BANK1_PIN07_MASK (0x3 << 14) +#define PINCTRL_MUXSEL2_BANK1_PIN07_OFFSET 14 +#define PINCTRL_MUXSEL2_BANK1_PIN06_MASK (0x3 << 12) +#define PINCTRL_MUXSEL2_BANK1_PIN06_OFFSET 12 +#define PINCTRL_MUXSEL2_BANK1_PIN05_MASK (0x3 << 10) +#define PINCTRL_MUXSEL2_BANK1_PIN05_OFFSET 10 +#define PINCTRL_MUXSEL2_BANK1_PIN04_MASK (0x3 << 8) +#define PINCTRL_MUXSEL2_BANK1_PIN04_OFFSET 8 +#define PINCTRL_MUXSEL2_BANK1_PIN03_MASK (0x3 << 6) +#define PINCTRL_MUXSEL2_BANK1_PIN03_OFFSET 6 +#define PINCTRL_MUXSEL2_BANK1_PIN02_MASK (0x3 << 4) +#define PINCTRL_MUXSEL2_BANK1_PIN02_OFFSET 4 +#define PINCTRL_MUXSEL2_BANK1_PIN01_MASK (0x3 << 2) +#define PINCTRL_MUXSEL2_BANK1_PIN01_OFFSET 2 +#define PINCTRL_MUXSEL2_BANK1_PIN00_MASK (0x3 << 0) +#define PINCTRL_MUXSEL2_BANK1_PIN00_OFFSET 0 + +#define PINCTRL_MUXSEL3_BANK1_PIN31_MASK (0x3 << 30) +#define PINCTRL_MUXSEL3_BANK1_PIN31_OFFSET 30 +#define PINCTRL_MUXSEL3_BANK1_PIN30_MASK (0x3 << 28) +#define PINCTRL_MUXSEL3_BANK1_PIN30_OFFSET 28 +#define PINCTRL_MUXSEL3_BANK1_PIN29_MASK (0x3 << 26) +#define PINCTRL_MUXSEL3_BANK1_PIN29_OFFSET 26 +#define PINCTRL_MUXSEL3_BANK1_PIN28_MASK (0x3 << 24) +#define PINCTRL_MUXSEL3_BANK1_PIN28_OFFSET 24 +#define PINCTRL_MUXSEL3_BANK1_PIN27_MASK (0x3 << 22) +#define PINCTRL_MUXSEL3_BANK1_PIN27_OFFSET 22 +#define PINCTRL_MUXSEL3_BANK1_PIN26_MASK (0x3 << 20) +#define PINCTRL_MUXSEL3_BANK1_PIN26_OFFSET 20 +#define PINCTRL_MUXSEL3_BANK1_PIN25_MASK (0x3 << 18) +#define PINCTRL_MUXSEL3_BANK1_PIN25_OFFSET 18 +#define PINCTRL_MUXSEL3_BANK1_PIN24_MASK (0x3 << 16) +#define PINCTRL_MUXSEL3_BANK1_PIN24_OFFSET 16 +#define PINCTRL_MUXSEL3_BANK1_PIN23_MASK (0x3 << 14) +#define PINCTRL_MUXSEL3_BANK1_PIN23_OFFSET 14 +#define PINCTRL_MUXSEL3_BANK1_PIN22_MASK (0x3 << 12) +#define PINCTRL_MUXSEL3_BANK1_PIN22_OFFSET 12 +#define PINCTRL_MUXSEL3_BANK1_PIN21_MASK (0x3 << 10) +#define PINCTRL_MUXSEL3_BANK1_PIN21_OFFSET 10 +#define PINCTRL_MUXSEL3_BANK1_PIN20_MASK (0x3 << 8) +#define PINCTRL_MUXSEL3_BANK1_PIN20_OFFSET 8 +#define PINCTRL_MUXSEL3_BANK1_PIN19_MASK (0x3 << 6) +#define PINCTRL_MUXSEL3_BANK1_PIN19_OFFSET 6 +#define PINCTRL_MUXSEL3_BANK1_PIN18_MASK (0x3 << 4) +#define PINCTRL_MUXSEL3_BANK1_PIN18_OFFSET 4 +#define PINCTRL_MUXSEL3_BANK1_PIN17_MASK (0x3 << 2) +#define PINCTRL_MUXSEL3_BANK1_PIN17_OFFSET 2 +#define PINCTRL_MUXSEL3_BANK1_PIN16_MASK (0x3 << 0) +#define PINCTRL_MUXSEL3_BANK1_PIN16_OFFSET 0 + +#define PINCTRL_MUXSEL4_BANK2_PIN15_MASK (0x3 << 30) +#define PINCTRL_MUXSEL4_BANK2_PIN15_OFFSET 30 +#define PINCTRL_MUXSEL4_BANK2_PIN14_MASK (0x3 << 28) +#define PINCTRL_MUXSEL4_BANK2_PIN14_OFFSET 28 +#define PINCTRL_MUXSEL4_BANK2_PIN13_MASK (0x3 << 26) +#define PINCTRL_MUXSEL4_BANK2_PIN13_OFFSET 26 +#define PINCTRL_MUXSEL4_BANK2_PIN12_MASK (0x3 << 24) +#define PINCTRL_MUXSEL4_BANK2_PIN12_OFFSET 24 +#define PINCTRL_MUXSEL4_BANK2_PIN10_MASK (0x3 << 20) +#define PINCTRL_MUXSEL4_BANK2_PIN10_OFFSET 20 +#define PINCTRL_MUXSEL4_BANK2_PIN09_MASK (0x3 << 18) +#define PINCTRL_MUXSEL4_BANK2_PIN09_OFFSET 18 +#define PINCTRL_MUXSEL4_BANK2_PIN08_MASK (0x3 << 16) +#define PINCTRL_MUXSEL4_BANK2_PIN08_OFFSET 16 +#define PINCTRL_MUXSEL4_BANK2_PIN07_MASK (0x3 << 14) +#define PINCTRL_MUXSEL4_BANK2_PIN07_OFFSET 14 +#define PINCTRL_MUXSEL4_BANK2_PIN06_MASK (0x3 << 12) +#define PINCTRL_MUXSEL4_BANK2_PIN06_OFFSET 12 +#define PINCTRL_MUXSEL4_BANK2_PIN05_MASK (0x3 << 10) +#define PINCTRL_MUXSEL4_BANK2_PIN05_OFFSET 10 +#define PINCTRL_MUXSEL4_BANK2_PIN04_MASK (0x3 << 8) +#define PINCTRL_MUXSEL4_BANK2_PIN04_OFFSET 8 +#define PINCTRL_MUXSEL4_BANK2_PIN03_MASK (0x3 << 6) +#define PINCTRL_MUXSEL4_BANK2_PIN03_OFFSET 6 +#define PINCTRL_MUXSEL4_BANK2_PIN02_MASK (0x3 << 4) +#define PINCTRL_MUXSEL4_BANK2_PIN02_OFFSET 4 +#define PINCTRL_MUXSEL4_BANK2_PIN01_MASK (0x3 << 2) +#define PINCTRL_MUXSEL4_BANK2_PIN01_OFFSET 2 +#define PINCTRL_MUXSEL4_BANK2_PIN00_MASK (0x3 << 0) +#define PINCTRL_MUXSEL4_BANK2_PIN00_OFFSET 0 + +#define PINCTRL_MUXSEL5_BANK2_PIN27_MASK (0x3 << 22) +#define PINCTRL_MUXSEL5_BANK2_PIN27_OFFSET 22 +#define PINCTRL_MUXSEL5_BANK2_PIN26_MASK (0x3 << 20) +#define PINCTRL_MUXSEL5_BANK2_PIN26_OFFSET 20 +#define PINCTRL_MUXSEL5_BANK2_PIN25_MASK (0x3 << 18) +#define PINCTRL_MUXSEL5_BANK2_PIN25_OFFSET 18 +#define PINCTRL_MUXSEL5_BANK2_PIN24_MASK (0x3 << 16) +#define PINCTRL_MUXSEL5_BANK2_PIN24_OFFSET 16 +#define PINCTRL_MUXSEL5_BANK2_PIN21_MASK (0x3 << 10) +#define PINCTRL_MUXSEL5_BANK2_PIN21_OFFSET 10 +#define PINCTRL_MUXSEL5_BANK2_PIN20_MASK (0x3 << 8) +#define PINCTRL_MUXSEL5_BANK2_PIN20_OFFSET 8 +#define PINCTRL_MUXSEL5_BANK2_PIN19_MASK (0x3 << 6) +#define PINCTRL_MUXSEL5_BANK2_PIN19_OFFSET 6 +#define PINCTRL_MUXSEL5_BANK2_PIN18_MASK (0x3 << 4) +#define PINCTRL_MUXSEL5_BANK2_PIN18_OFFSET 4 +#define PINCTRL_MUXSEL5_BANK2_PIN17_MASK (0x3 << 2) +#define PINCTRL_MUXSEL5_BANK2_PIN17_OFFSET 2 +#define PINCTRL_MUXSEL5_BANK2_PIN16_MASK (0x3 << 0) +#define PINCTRL_MUXSEL5_BANK2_PIN16_OFFSET 0 + +#define PINCTRL_MUXSEL6_BANK3_PIN15_MASK (0x3 << 30) +#define PINCTRL_MUXSEL6_BANK3_PIN15_OFFSET 30 +#define PINCTRL_MUXSEL6_BANK3_PIN14_MASK (0x3 << 28) +#define PINCTRL_MUXSEL6_BANK3_PIN14_OFFSET 28 +#define PINCTRL_MUXSEL6_BANK3_PIN13_MASK (0x3 << 26) +#define PINCTRL_MUXSEL6_BANK3_PIN13_OFFSET 26 +#define PINCTRL_MUXSEL6_BANK3_PIN12_MASK (0x3 << 24) +#define PINCTRL_MUXSEL6_BANK3_PIN12_OFFSET 24 +#define PINCTRL_MUXSEL6_BANK3_PIN11_MASK (0x3 << 22) +#define PINCTRL_MUXSEL6_BANK3_PIN11_OFFSET 22 +#define PINCTRL_MUXSEL6_BANK3_PIN10_MASK (0x3 << 20) +#define PINCTRL_MUXSEL6_BANK3_PIN10_OFFSET 20 +#define PINCTRL_MUXSEL6_BANK3_PIN09_MASK (0x3 << 18) +#define PINCTRL_MUXSEL6_BANK3_PIN09_OFFSET 18 +#define PINCTRL_MUXSEL6_BANK3_PIN08_MASK (0x3 << 16) +#define PINCTRL_MUXSEL6_BANK3_PIN08_OFFSET 16 +#define PINCTRL_MUXSEL6_BANK3_PIN07_MASK (0x3 << 14) +#define PINCTRL_MUXSEL6_BANK3_PIN07_OFFSET 14 +#define PINCTRL_MUXSEL6_BANK3_PIN06_MASK (0x3 << 12) +#define PINCTRL_MUXSEL6_BANK3_PIN06_OFFSET 12 +#define PINCTRL_MUXSEL6_BANK3_PIN05_MASK (0x3 << 10) +#define PINCTRL_MUXSEL6_BANK3_PIN05_OFFSET 10 +#define PINCTRL_MUXSEL6_BANK3_PIN04_MASK (0x3 << 8) +#define PINCTRL_MUXSEL6_BANK3_PIN04_OFFSET 8 +#define PINCTRL_MUXSEL6_BANK3_PIN03_MASK (0x3 << 6) +#define PINCTRL_MUXSEL6_BANK3_PIN03_OFFSET 6 +#define PINCTRL_MUXSEL6_BANK3_PIN02_MASK (0x3 << 4) +#define PINCTRL_MUXSEL6_BANK3_PIN02_OFFSET 4 +#define PINCTRL_MUXSEL6_BANK3_PIN01_MASK (0x3 << 2) +#define PINCTRL_MUXSEL6_BANK3_PIN01_OFFSET 2 +#define PINCTRL_MUXSEL6_BANK3_PIN00_MASK (0x3 << 0) +#define PINCTRL_MUXSEL6_BANK3_PIN00_OFFSET 0 + +#define PINCTRL_MUXSEL7_BANK3_PIN30_MASK (0x3 << 28) +#define PINCTRL_MUXSEL7_BANK3_PIN30_OFFSET 28 +#define PINCTRL_MUXSEL7_BANK3_PIN29_MASK (0x3 << 26) +#define PINCTRL_MUXSEL7_BANK3_PIN29_OFFSET 26 +#define PINCTRL_MUXSEL7_BANK3_PIN28_MASK (0x3 << 24) +#define PINCTRL_MUXSEL7_BANK3_PIN28_OFFSET 24 +#define PINCTRL_MUXSEL7_BANK3_PIN27_MASK (0x3 << 22) +#define PINCTRL_MUXSEL7_BANK3_PIN27_OFFSET 22 +#define PINCTRL_MUXSEL7_BANK3_PIN26_MASK (0x3 << 20) +#define PINCTRL_MUXSEL7_BANK3_PIN26_OFFSET 20 +#define PINCTRL_MUXSEL7_BANK3_PIN25_MASK (0x3 << 18) +#define PINCTRL_MUXSEL7_BANK3_PIN25_OFFSET 18 +#define PINCTRL_MUXSEL7_BANK3_PIN24_MASK (0x3 << 16) +#define PINCTRL_MUXSEL7_BANK3_PIN24_OFFSET 16 +#define PINCTRL_MUXSEL7_BANK3_PIN23_MASK (0x3 << 14) +#define PINCTRL_MUXSEL7_BANK3_PIN23_OFFSET 14 +#define PINCTRL_MUXSEL7_BANK3_PIN22_MASK (0x3 << 12) +#define PINCTRL_MUXSEL7_BANK3_PIN22_OFFSET 12 +#define PINCTRL_MUXSEL7_BANK3_PIN21_MASK (0x3 << 10) +#define PINCTRL_MUXSEL7_BANK3_PIN21_OFFSET 10 +#define PINCTRL_MUXSEL7_BANK3_PIN20_MASK (0x3 << 8) +#define PINCTRL_MUXSEL7_BANK3_PIN20_OFFSET 8 +#define PINCTRL_MUXSEL7_BANK3_PIN18_MASK (0x3 << 4) +#define PINCTRL_MUXSEL7_BANK3_PIN18_OFFSET 4 +#define PINCTRL_MUXSEL7_BANK3_PIN17_MASK (0x3 << 2) +#define PINCTRL_MUXSEL7_BANK3_PIN17_OFFSET 2 +#define PINCTRL_MUXSEL7_BANK3_PIN16_MASK (0x3 << 0) +#define PINCTRL_MUXSEL7_BANK3_PIN16_OFFSET 0 + +#define PINCTRL_MUXSEL8_BANK4_PIN15_MASK (0x3 << 30) +#define PINCTRL_MUXSEL8_BANK4_PIN15_OFFSET 30 +#define PINCTRL_MUXSEL8_BANK4_PIN14_MASK (0x3 << 28) +#define PINCTRL_MUXSEL8_BANK4_PIN14_OFFSET 28 +#define PINCTRL_MUXSEL8_BANK4_PIN13_MASK (0x3 << 26) +#define PINCTRL_MUXSEL8_BANK4_PIN13_OFFSET 26 +#define PINCTRL_MUXSEL8_BANK4_PIN12_MASK (0x3 << 24) +#define PINCTRL_MUXSEL8_BANK4_PIN12_OFFSET 24 +#define PINCTRL_MUXSEL8_BANK4_PIN11_MASK (0x3 << 22) +#define PINCTRL_MUXSEL8_BANK4_PIN11_OFFSET 22 +#define PINCTRL_MUXSEL8_BANK4_PIN10_MASK (0x3 << 20) +#define PINCTRL_MUXSEL8_BANK4_PIN10_OFFSET 20 +#define PINCTRL_MUXSEL8_BANK4_PIN09_MASK (0x3 << 18) +#define PINCTRL_MUXSEL8_BANK4_PIN09_OFFSET 18 +#define PINCTRL_MUXSEL8_BANK4_PIN08_MASK (0x3 << 16) +#define PINCTRL_MUXSEL8_BANK4_PIN08_OFFSET 16 +#define PINCTRL_MUXSEL8_BANK4_PIN07_MASK (0x3 << 14) +#define PINCTRL_MUXSEL8_BANK4_PIN07_OFFSET 14 +#define PINCTRL_MUXSEL8_BANK4_PIN06_MASK (0x3 << 12) +#define PINCTRL_MUXSEL8_BANK4_PIN06_OFFSET 12 +#define PINCTRL_MUXSEL8_BANK4_PIN05_MASK (0x3 << 10) +#define PINCTRL_MUXSEL8_BANK4_PIN05_OFFSET 10 +#define PINCTRL_MUXSEL8_BANK4_PIN04_MASK (0x3 << 8) +#define PINCTRL_MUXSEL8_BANK4_PIN04_OFFSET 8 +#define PINCTRL_MUXSEL8_BANK4_PIN03_MASK (0x3 << 6) +#define PINCTRL_MUXSEL8_BANK4_PIN03_OFFSET 6 +#define PINCTRL_MUXSEL8_BANK4_PIN02_MASK (0x3 << 4) +#define PINCTRL_MUXSEL8_BANK4_PIN02_OFFSET 4 +#define PINCTRL_MUXSEL8_BANK4_PIN01_MASK (0x3 << 2) +#define PINCTRL_MUXSEL8_BANK4_PIN01_OFFSET 2 +#define PINCTRL_MUXSEL8_BANK4_PIN00_MASK (0x3 << 0) +#define PINCTRL_MUXSEL8_BANK4_PIN00_OFFSET 0 + +#define PINCTRL_MUXSEL9_BANK4_PIN20_MASK (0x3 << 8) +#define PINCTRL_MUXSEL9_BANK4_PIN20_OFFSET 8 +#define PINCTRL_MUXSEL9_BANK4_PIN16_MASK (0x3 << 0) +#define PINCTRL_MUXSEL9_BANK4_PIN16_OFFSET 0 + +#define PINCTRL_MUXSEL10_BANK5_PIN15_MASK (0x3 << 30) +#define PINCTRL_MUXSEL10_BANK5_PIN15_OFFSET 30 +#define PINCTRL_MUXSEL10_BANK5_PIN14_MASK (0x3 << 28) +#define PINCTRL_MUXSEL10_BANK5_PIN14_OFFSET 28 +#define PINCTRL_MUXSEL10_BANK5_PIN13_MASK (0x3 << 26) +#define PINCTRL_MUXSEL10_BANK5_PIN13_OFFSET 26 +#define PINCTRL_MUXSEL10_BANK5_PIN12_MASK (0x3 << 24) +#define PINCTRL_MUXSEL10_BANK5_PIN12_OFFSET 24 +#define PINCTRL_MUXSEL10_BANK5_PIN11_MASK (0x3 << 22) +#define PINCTRL_MUXSEL10_BANK5_PIN11_OFFSET 22 +#define PINCTRL_MUXSEL10_BANK5_PIN10_MASK (0x3 << 20) +#define PINCTRL_MUXSEL10_BANK5_PIN10_OFFSET 20 +#define PINCTRL_MUXSEL10_BANK5_PIN09_MASK (0x3 << 18) +#define PINCTRL_MUXSEL10_BANK5_PIN09_OFFSET 18 +#define PINCTRL_MUXSEL10_BANK5_PIN08_MASK (0x3 << 16) +#define PINCTRL_MUXSEL10_BANK5_PIN08_OFFSET 16 +#define PINCTRL_MUXSEL10_BANK5_PIN07_MASK (0x3 << 14) +#define PINCTRL_MUXSEL10_BANK5_PIN07_OFFSET 14 +#define PINCTRL_MUXSEL10_BANK5_PIN06_MASK (0x3 << 12) +#define PINCTRL_MUXSEL10_BANK5_PIN06_OFFSET 12 +#define PINCTRL_MUXSEL10_BANK5_PIN05_MASK (0x3 << 10) +#define PINCTRL_MUXSEL10_BANK5_PIN05_OFFSET 10 +#define PINCTRL_MUXSEL10_BANK5_PIN04_MASK (0x3 << 8) +#define PINCTRL_MUXSEL10_BANK5_PIN04_OFFSET 8 +#define PINCTRL_MUXSEL10_BANK5_PIN03_MASK (0x3 << 6) +#define PINCTRL_MUXSEL10_BANK5_PIN03_OFFSET 6 +#define PINCTRL_MUXSEL10_BANK5_PIN02_MASK (0x3 << 4) +#define PINCTRL_MUXSEL10_BANK5_PIN02_OFFSET 4 +#define PINCTRL_MUXSEL10_BANK5_PIN01_MASK (0x3 << 2) +#define PINCTRL_MUXSEL10_BANK5_PIN01_OFFSET 2 +#define PINCTRL_MUXSEL10_BANK5_PIN00_MASK (0x3 << 0) +#define PINCTRL_MUXSEL10_BANK5_PIN00_OFFSET 0 + +#define PINCTRL_MUXSEL11_BANK5_PIN26_MASK (0x3 << 20) +#define PINCTRL_MUXSEL11_BANK5_PIN26_OFFSET 20 +#define PINCTRL_MUXSEL11_BANK5_PIN23_MASK (0x3 << 14) +#define PINCTRL_MUXSEL11_BANK5_PIN23_OFFSET 14 +#define PINCTRL_MUXSEL11_BANK5_PIN22_MASK (0x3 << 12) +#define PINCTRL_MUXSEL11_BANK5_PIN22_OFFSET 12 +#define PINCTRL_MUXSEL11_BANK5_PIN21_MASK (0x3 << 10) +#define PINCTRL_MUXSEL11_BANK5_PIN21_OFFSET 10 +#define PINCTRL_MUXSEL11_BANK5_PIN20_MASK (0x3 << 8) +#define PINCTRL_MUXSEL11_BANK5_PIN20_OFFSET 8 +#define PINCTRL_MUXSEL11_BANK5_PIN19_MASK (0x3 << 6) +#define PINCTRL_MUXSEL11_BANK5_PIN19_OFFSET 6 +#define PINCTRL_MUXSEL11_BANK5_PIN18_MASK (0x3 << 4) +#define PINCTRL_MUXSEL11_BANK5_PIN18_OFFSET 4 +#define PINCTRL_MUXSEL11_BANK5_PIN17_MASK (0x3 << 2) +#define PINCTRL_MUXSEL11_BANK5_PIN17_OFFSET 2 +#define PINCTRL_MUXSEL11_BANK5_PIN16_MASK (0x3 << 0) +#define PINCTRL_MUXSEL11_BANK5_PIN16_OFFSET 0 + +#define PINCTRL_MUXSEL12_BANK6_PIN14_MASK (0x3 << 28) +#define PINCTRL_MUXSEL12_BANK6_PIN14_OFFSET 28 +#define PINCTRL_MUXSEL12_BANK6_PIN13_MASK (0x3 << 26) +#define PINCTRL_MUXSEL12_BANK6_PIN13_OFFSET 26 +#define PINCTRL_MUXSEL12_BANK6_PIN12_MASK (0x3 << 24) +#define PINCTRL_MUXSEL12_BANK6_PIN12_OFFSET 24 +#define PINCTRL_MUXSEL12_BANK6_PIN11_MASK (0x3 << 22) +#define PINCTRL_MUXSEL12_BANK6_PIN11_OFFSET 22 +#define PINCTRL_MUXSEL12_BANK6_PIN10_MASK (0x3 << 20) +#define PINCTRL_MUXSEL12_BANK6_PIN10_OFFSET 20 +#define PINCTRL_MUXSEL12_BANK6_PIN09_MASK (0x3 << 18) +#define PINCTRL_MUXSEL12_BANK6_PIN09_OFFSET 18 +#define PINCTRL_MUXSEL12_BANK6_PIN08_MASK (0x3 << 16) +#define PINCTRL_MUXSEL12_BANK6_PIN08_OFFSET 16 +#define PINCTRL_MUXSEL12_BANK6_PIN07_MASK (0x3 << 14) +#define PINCTRL_MUXSEL12_BANK6_PIN07_OFFSET 14 +#define PINCTRL_MUXSEL12_BANK6_PIN06_MASK (0x3 << 12) +#define PINCTRL_MUXSEL12_BANK6_PIN06_OFFSET 12 +#define PINCTRL_MUXSEL12_BANK6_PIN05_MASK (0x3 << 10) +#define PINCTRL_MUXSEL12_BANK6_PIN05_OFFSET 10 +#define PINCTRL_MUXSEL12_BANK6_PIN04_MASK (0x3 << 8) +#define PINCTRL_MUXSEL12_BANK6_PIN04_OFFSET 8 +#define PINCTRL_MUXSEL12_BANK6_PIN03_MASK (0x3 << 6) +#define PINCTRL_MUXSEL12_BANK6_PIN03_OFFSET 6 +#define PINCTRL_MUXSEL12_BANK6_PIN02_MASK (0x3 << 4) +#define PINCTRL_MUXSEL12_BANK6_PIN02_OFFSET 4 +#define PINCTRL_MUXSEL12_BANK6_PIN01_MASK (0x3 << 2) +#define PINCTRL_MUXSEL12_BANK6_PIN01_OFFSET 2 +#define PINCTRL_MUXSEL12_BANK6_PIN00_MASK (0x3 << 0) +#define PINCTRL_MUXSEL12_BANK6_PIN00_OFFSET 0 + +#define PINCTRL_MUXSEL13_BANK6_PIN24_MASK (0x3 << 16) +#define PINCTRL_MUXSEL13_BANK6_PIN24_OFFSET 16 +#define PINCTRL_MUXSEL13_BANK6_PIN23_MASK (0x3 << 14) +#define PINCTRL_MUXSEL13_BANK6_PIN23_OFFSET 14 +#define PINCTRL_MUXSEL13_BANK6_PIN22_MASK (0x3 << 12) +#define PINCTRL_MUXSEL13_BANK6_PIN22_OFFSET 12 +#define PINCTRL_MUXSEL13_BANK6_PIN21_MASK (0x3 << 10) +#define PINCTRL_MUXSEL13_BANK6_PIN21_OFFSET 10 +#define PINCTRL_MUXSEL13_BANK6_PIN20_MASK (0x3 << 8) +#define PINCTRL_MUXSEL13_BANK6_PIN20_OFFSET 8 +#define PINCTRL_MUXSEL13_BANK6_PIN19_MASK (0x3 << 6) +#define PINCTRL_MUXSEL13_BANK6_PIN19_OFFSET 6 +#define PINCTRL_MUXSEL13_BANK6_PIN18_MASK (0x3 << 4) +#define PINCTRL_MUXSEL13_BANK6_PIN18_OFFSET 4 +#define PINCTRL_MUXSEL13_BANK6_PIN17_MASK (0x3 << 2) +#define PINCTRL_MUXSEL13_BANK6_PIN17_OFFSET 2 +#define PINCTRL_MUXSEL13_BANK6_PIN16_MASK (0x3 << 0) +#define PINCTRL_MUXSEL13_BANK6_PIN16_OFFSET 0 + +#define PINCTRL_DRIVE0_BANK0_PIN07_V (1 << 30) +#define PINCTRL_DRIVE0_BANK0_PIN07_MA_MASK (0x3 << 28) +#define PINCTRL_DRIVE0_BANK0_PIN07_MA_OFFSET 28 +#define PINCTRL_DRIVE0_BANK0_PIN06_V (1 << 26) +#define PINCTRL_DRIVE0_BANK0_PIN06_MA_MASK (0x3 << 24) +#define PINCTRL_DRIVE0_BANK0_PIN06_MA_OFFSET 24 +#define PINCTRL_DRIVE0_BANK0_PIN05_V (1 << 22) +#define PINCTRL_DRIVE0_BANK0_PIN05_MA_MASK (0x3 << 20) +#define PINCTRL_DRIVE0_BANK0_PIN05_MA_OFFSET 20 +#define PINCTRL_DRIVE0_BANK0_PIN04_V (1 << 18) +#define PINCTRL_DRIVE0_BANK0_PIN04_MA_MASK (0x3 << 16) +#define PINCTRL_DRIVE0_BANK0_PIN04_MA_OFFSET 16 +#define PINCTRL_DRIVE0_BANK0_PIN03_V (1 << 14) +#define PINCTRL_DRIVE0_BANK0_PIN03_MA_MASK (0x3 << 12) +#define PINCTRL_DRIVE0_BANK0_PIN03_MA_OFFSET 12 +#define PINCTRL_DRIVE0_BANK0_PIN02_V (1 << 10) +#define PINCTRL_DRIVE0_BANK0_PIN02_MA_MASK (0x3 << 8) +#define PINCTRL_DRIVE0_BANK0_PIN02_MA_OFFSET 8 +#define PINCTRL_DRIVE0_BANK0_PIN01_V (1 << 6) +#define PINCTRL_DRIVE0_BANK0_PIN01_MA_MASK (0x3 << 4) +#define PINCTRL_DRIVE0_BANK0_PIN01_MA_OFFSET 4 +#define PINCTRL_DRIVE0_BANK0_PIN00_V (1 << 2) +#define PINCTRL_DRIVE0_BANK0_PIN00_MA_MASK (0x3 << 0) +#define PINCTRL_DRIVE0_BANK0_PIN00_MA_OFFSET 0 + +#define PINCTRL_DRIVE2_BANK0_PIN23_V (1 << 30) +#define PINCTRL_DRIVE2_BANK0_PIN23_MA_MASK (0x3 << 28) +#define PINCTRL_DRIVE2_BANK0_PIN23_MA_OFFSET 28 +#define PINCTRL_DRIVE2_BANK0_PIN22_V (1 << 26) +#define PINCTRL_DRIVE2_BANK0_PIN22_MA_MASK (0x3 << 24) +#define PINCTRL_DRIVE2_BANK0_PIN22_MA_OFFSET 24 +#define PINCTRL_DRIVE2_BANK0_PIN21_V (1 << 22) +#define PINCTRL_DRIVE2_BANK0_PIN21_MA_MASK (0x3 << 20) +#define PINCTRL_DRIVE2_BANK0_PIN21_MA_OFFSET 20 +#define PINCTRL_DRIVE2_BANK0_PIN20_V (1 << 18) +#define PINCTRL_DRIVE2_BANK0_PIN20_MA_MASK (0x3 << 16) +#define PINCTRL_DRIVE2_BANK0_PIN20_MA_OFFSET 16 +#define PINCTRL_DRIVE2_BANK0_PIN19_V (1 << 14) +#define PINCTRL_DRIVE2_BANK0_PIN19_MA_MASK (0x3 << 12) +#define PINCTRL_DRIVE2_BANK0_PIN19_MA_OFFSET 12 +#define PINCTRL_DRIVE2_BANK0_PIN18_V (1 << 10) +#define PINCTRL_DRIVE2_BANK0_PIN18_MA_MASK (0x3 << 8) +#define PINCTRL_DRIVE2_BANK0_PIN18_MA_OFFSET 8 +#define PINCTRL_DRIVE2_BANK0_PIN17_V (1 << 6) +#define PINCTRL_DRIVE2_BANK0_PIN17_MA_MASK (0x3 << 4) +#define PINCTRL_DRIVE2_BANK0_PIN17_MA_OFFSET 4 +#define PINCTRL_DRIVE2_BANK0_PIN16_V (1 << 2) +#define PINCTRL_DRIVE2_BANK0_PIN16_MA_MASK (0x3 << 0) +#define PINCTRL_DRIVE2_BANK0_PIN16_MA_OFFSET 0 + +#define PINCTRL_DRIVE3_BANK0_PIN28_V (1 << 18) +#define PINCTRL_DRIVE3_BANK0_PIN28_MA_MASK (0x3 << 16) +#define PINCTRL_DRIVE3_BANK0_PIN28_MA_OFFSET 16 +#define PINCTRL_DRIVE3_BANK0_PIN27_V (1 << 14) +#define PINCTRL_DRIVE3_BANK0_PIN27_MA_MASK (0x3 << 12) +#define PINCTRL_DRIVE3_BANK0_PIN27_MA_OFFSET 12 +#define PINCTRL_DRIVE3_BANK0_PIN26_V (1 << 10) +#define PINCTRL_DRIVE3_BANK0_PIN26_MA_MASK (0x3 << 8) +#define PINCTRL_DRIVE3_BANK0_PIN26_MA_OFFSET 8 +#define PINCTRL_DRIVE3_BANK0_PIN25_V (1 << 6) +#define PINCTRL_DRIVE3_BANK0_PIN25_MA_MASK (0x3 << 4) +#define PINCTRL_DRIVE3_BANK0_PIN25_MA_OFFSET 4 +#define PINCTRL_DRIVE3_BANK0_PIN24_V (1 << 2) +#define PINCTRL_DRIVE3_BANK0_PIN24_MA_MASK (0x3 << 0) +#define PINCTRL_DRIVE3_BANK0_PIN24_MA_OFFSET 0 + +#define PINCTRL_DRIVE4_BANK1_PIN07_V (1 << 30) +#define PINCTRL_DRIVE4_BANK1_PIN07_MA_MASK (0x3 << 28) +#define PINCTRL_DRIVE4_BANK1_PIN07_MA_OFFSET 28 +#define PINCTRL_DRIVE4_BANK1_PIN06_V (1 << 26) +#define PINCTRL_DRIVE4_BANK1_PIN06_MA_MASK (0x3 << 24) +#define PINCTRL_DRIVE4_BANK1_PIN06_MA_OFFSET 24 +#define PINCTRL_DRIVE4_BANK1_PIN05_V (1 << 22) +#define PINCTRL_DRIVE4_BANK1_PIN05_MA_MASK (0x3 << 20) +#define PINCTRL_DRIVE4_BANK1_PIN05_MA_OFFSET 20 +#define PINCTRL_DRIVE4_BANK1_PIN04_V (1 << 18) +#define PINCTRL_DRIVE4_BANK1_PIN04_MA_MASK (0x3 << 16) +#define PINCTRL_DRIVE4_BANK1_PIN04_MA_OFFSET 16 +#define PINCTRL_DRIVE4_BANK1_PIN03_V (1 << 14) +#define PINCTRL_DRIVE4_BANK1_PIN03_MA_MASK (0x3 << 12) +#define PINCTRL_DRIVE4_BANK1_PIN03_MA_OFFSET 12 +#define PINCTRL_DRIVE4_BANK1_PIN02_V (1 << 10) +#define PINCTRL_DRIVE4_BANK1_PIN02_MA_MASK (0x3 << 8) +#define PINCTRL_DRIVE4_BANK1_PIN02_MA_OFFSET 8 +#define PINCTRL_DRIVE4_BANK1_PIN01_V (1 << 6) +#define PINCTRL_DRIVE4_BANK1_PIN01_MA_MASK (0x3 << 4) +#define PINCTRL_DRIVE4_BANK1_PIN01_MA_OFFSET 4 +#define PINCTRL_DRIVE4_BANK1_PIN00_V (1 << 2) +#define PINCTRL_DRIVE4_BANK1_PIN00_MA_MASK (0x3 << 0) +#define PINCTRL_DRIVE4_BANK1_PIN00_MA_OFFSET 0 + +#define PINCTRL_DRIVE5_BANK1_PIN15_V (1 << 30) +#define PINCTRL_DRIVE5_BANK1_PIN15_MA_MASK (0x3 << 28) +#define PINCTRL_DRIVE5_BANK1_PIN15_MA_OFFSET 28 +#define PINCTRL_DRIVE5_BANK1_PIN14_V (1 << 26) +#define PINCTRL_DRIVE5_BANK1_PIN14_MA_MASK (0x3 << 24) +#define PINCTRL_DRIVE5_BANK1_PIN14_MA_OFFSET 24 +#define PINCTRL_DRIVE5_BANK1_PIN13_V (1 << 22) +#define PINCTRL_DRIVE5_BANK1_PIN13_MA_MASK (0x3 << 20) +#define PINCTRL_DRIVE5_BANK1_PIN13_MA_OFFSET 20 +#define PINCTRL_DRIVE5_BANK1_PIN12_V (1 << 18) +#define PINCTRL_DRIVE5_BANK1_PIN12_MA_MASK (0x3 << 16) +#define PINCTRL_DRIVE5_BANK1_PIN12_MA_OFFSET 16 +#define PINCTRL_DRIVE5_BANK1_PIN11_V (1 << 14) +#define PINCTRL_DRIVE5_BANK1_PIN11_MA_MASK (0x3 << 12) +#define PINCTRL_DRIVE5_BANK1_PIN11_MA_OFFSET 12 +#define PINCTRL_DRIVE5_BANK1_PIN10_V (1 << 10) +#define PINCTRL_DRIVE5_BANK1_PIN10_MA_MASK (0x3 << 8) +#define PINCTRL_DRIVE5_BANK1_PIN10_MA_OFFSET 8 +#define PINCTRL_DRIVE5_BANK1_PIN09_V (1 << 6) +#define PINCTRL_DRIVE5_BANK1_PIN09_MA_MASK (0x3 << 4) +#define PINCTRL_DRIVE5_BANK1_PIN09_MA_OFFSET 4 +#define PINCTRL_DRIVE5_BANK1_PIN08_V (1 << 2) +#define PINCTRL_DRIVE5_BANK1_PIN08_MA_MASK (0x3 << 0) +#define PINCTRL_DRIVE5_BANK1_PIN08_MA_OFFSET 0 + +#define PINCTRL_DRIVE6_BANK1_PIN23_V (1 << 30) +#define PINCTRL_DRIVE6_BANK1_PIN23_MA_MASK (0x3 << 28) +#define PINCTRL_DRIVE6_BANK1_PIN23_MA_OFFSET 28 +#define PINCTRL_DRIVE6_BANK1_PIN22_V (1 << 26) +#define PINCTRL_DRIVE6_BANK1_PIN22_MA_MASK (0x3 << 24) +#define PINCTRL_DRIVE6_BANK1_PIN22_MA_OFFSET 24 +#define PINCTRL_DRIVE6_BANK1_PIN21_V (1 << 22) +#define PINCTRL_DRIVE6_BANK1_PIN21_MA_MASK (0x3 << 20) +#define PINCTRL_DRIVE6_BANK1_PIN21_MA_OFFSET 20 +#define PINCTRL_DRIVE6_BANK1_PIN20_V (1 << 18) +#define PINCTRL_DRIVE6_BANK1_PIN20_MA_MASK (0x3 << 16) +#define PINCTRL_DRIVE6_BANK1_PIN20_MA_OFFSET 16 +#define PINCTRL_DRIVE6_BANK1_PIN19_V (1 << 14) +#define PINCTRL_DRIVE6_BANK1_PIN19_MA_MASK (0x3 << 12) +#define PINCTRL_DRIVE6_BANK1_PIN19_MA_OFFSET 12 +#define PINCTRL_DRIVE6_BANK1_PIN18_V (1 << 10) +#define PINCTRL_DRIVE6_BANK1_PIN18_MA_MASK (0x3 << 8) +#define PINCTRL_DRIVE6_BANK1_PIN18_MA_OFFSET 8 +#define PINCTRL_DRIVE6_BANK1_PIN17_V (1 << 6) +#define PINCTRL_DRIVE6_BANK1_PIN17_MA_MASK (0x3 << 4) +#define PINCTRL_DRIVE6_BANK1_PIN17_MA_OFFSET 4 +#define PINCTRL_DRIVE6_BANK1_PIN16_V (1 << 2) +#define PINCTRL_DRIVE6_BANK1_PIN16_MA_MASK (0x3 << 0) +#define PINCTRL_DRIVE6_BANK1_PIN16_MA_OFFSET 0 + +#define PINCTRL_DRIVE7_BANK1_PIN31_V (1 << 30) +#define PINCTRL_DRIVE7_BANK1_PIN31_MA_MASK (0x3 << 28) +#define PINCTRL_DRIVE7_BANK1_PIN31_MA_OFFSET 28 +#define PINCTRL_DRIVE7_BANK1_PIN30_V (1 << 26) +#define PINCTRL_DRIVE7_BANK1_PIN30_MA_MASK (0x3 << 24) +#define PINCTRL_DRIVE7_BANK1_PIN30_MA_OFFSET 24 +#define PINCTRL_DRIVE7_BANK1_PIN29_V (1 << 22) +#define PINCTRL_DRIVE7_BANK1_PIN29_MA_MASK (0x3 << 20) +#define PINCTRL_DRIVE7_BANK1_PIN29_MA_OFFSET 20 +#define PINCTRL_DRIVE7_BANK1_PIN28_V (1 << 18) +#define PINCTRL_DRIVE7_BANK1_PIN28_MA_MASK (0x3 << 16) +#define PINCTRL_DRIVE7_BANK1_PIN28_MA_OFFSET 16 +#define PINCTRL_DRIVE7_BANK1_PIN27_V (1 << 14) +#define PINCTRL_DRIVE7_BANK1_PIN27_MA_MASK (0x3 << 12) +#define PINCTRL_DRIVE7_BANK1_PIN27_MA_OFFSET 12 +#define PINCTRL_DRIVE7_BANK1_PIN26_V (1 << 10) +#define PINCTRL_DRIVE7_BANK1_PIN26_MA_MASK (0x3 << 8) +#define PINCTRL_DRIVE7_BANK1_PIN26_MA_OFFSET 8 +#define PINCTRL_DRIVE7_BANK1_PIN25_V (1 << 6) +#define PINCTRL_DRIVE7_BANK1_PIN25_MA_MASK (0x3 << 4) +#define PINCTRL_DRIVE7_BANK1_PIN25_MA_OFFSET 4 +#define PINCTRL_DRIVE7_BANK1_PIN24_V (1 << 2) +#define PINCTRL_DRIVE7_BANK1_PIN24_MA_MASK (0x3 << 0) +#define PINCTRL_DRIVE7_BANK1_PIN24_MA_OFFSET 0 + +#define PINCTRL_DRIVE8_BANK2_PIN07_V (1 << 30) +#define PINCTRL_DRIVE8_BANK2_PIN07_MA_MASK (0x3 << 28) +#define PINCTRL_DRIVE8_BANK2_PIN07_MA_OFFSET 28 +#define PINCTRL_DRIVE8_BANK2_PIN06_V (1 << 26) +#define PINCTRL_DRIVE8_BANK2_PIN06_MA_MASK (0x3 << 24) +#define PINCTRL_DRIVE8_BANK2_PIN06_MA_OFFSET 24 +#define PINCTRL_DRIVE8_BANK2_PIN05_V (1 << 22) +#define PINCTRL_DRIVE8_BANK2_PIN05_MA_MASK (0x3 << 20) +#define PINCTRL_DRIVE8_BANK2_PIN05_MA_OFFSET 20 +#define PINCTRL_DRIVE8_BANK2_PIN04_V (1 << 18) +#define PINCTRL_DRIVE8_BANK2_PIN04_MA_MASK (0x3 << 16) +#define PINCTRL_DRIVE8_BANK2_PIN04_MA_OFFSET 16 +#define PINCTRL_DRIVE8_BANK2_PIN03_V (1 << 14) +#define PINCTRL_DRIVE8_BANK2_PIN03_MA_MASK (0x3 << 12) +#define PINCTRL_DRIVE8_BANK2_PIN03_MA_OFFSET 12 +#define PINCTRL_DRIVE8_BANK2_PIN02_V (1 << 10) +#define PINCTRL_DRIVE8_BANK2_PIN02_MA_MASK (0x3 << 8) +#define PINCTRL_DRIVE8_BANK2_PIN02_MA_OFFSET 8 +#define PINCTRL_DRIVE8_BANK2_PIN01_V (1 << 6) +#define PINCTRL_DRIVE8_BANK2_PIN01_MA_MASK (0x3 << 4) +#define PINCTRL_DRIVE8_BANK2_PIN01_MA_OFFSET 4 +#define PINCTRL_DRIVE8_BANK2_PIN00_V (1 << 2) +#define PINCTRL_DRIVE8_BANK2_PIN00_MA_MASK (0x3 << 0) +#define PINCTRL_DRIVE8_BANK2_PIN00_MA_OFFSET 0 + +#define PINCTRL_DRIVE9_BANK2_PIN15_V (1 << 30) +#define PINCTRL_DRIVE9_BANK2_PIN15_MA_MASK (0x3 << 28) +#define PINCTRL_DRIVE9_BANK2_PIN15_MA_OFFSET 28 +#define PINCTRL_DRIVE9_BANK2_PIN14_V (1 << 26) +#define PINCTRL_DRIVE9_BANK2_PIN14_MA_MASK (0x3 << 24) +#define PINCTRL_DRIVE9_BANK2_PIN14_MA_OFFSET 24 +#define PINCTRL_DRIVE9_BANK2_PIN13_V (1 << 22) +#define PINCTRL_DRIVE9_BANK2_PIN13_MA_MASK (0x3 << 20) +#define PINCTRL_DRIVE9_BANK2_PIN13_MA_OFFSET 20 +#define PINCTRL_DRIVE9_BANK2_PIN12_V (1 << 18) +#define PINCTRL_DRIVE9_BANK2_PIN12_MA_MASK (0x3 << 16) +#define PINCTRL_DRIVE9_BANK2_PIN12_MA_OFFSET 16 +#define PINCTRL_DRIVE9_BANK2_PIN10_V (1 << 10) +#define PINCTRL_DRIVE9_BANK2_PIN10_MA_MASK (0x3 << 8) +#define PINCTRL_DRIVE9_BANK2_PIN10_MA_OFFSET 8 +#define PINCTRL_DRIVE9_BANK2_PIN09_V (1 << 6) +#define PINCTRL_DRIVE9_BANK2_PIN09_MA_MASK (0x3 << 4) +#define PINCTRL_DRIVE9_BANK2_PIN09_MA_OFFSET 4 +#define PINCTRL_DRIVE9_BANK2_PIN08_V (1 << 2) +#define PINCTRL_DRIVE9_BANK2_PIN08_MA_MASK (0x3 << 0) +#define PINCTRL_DRIVE9_BANK2_PIN08_MA_OFFSET 0 + +#define PINCTRL_DRIVE10_BANK2_PIN21_V (1 << 22) +#define PINCTRL_DRIVE10_BANK2_PIN21_MA_MASK (0x3 << 20) +#define PINCTRL_DRIVE10_BANK2_PIN21_MA_OFFSET 20 +#define PINCTRL_DRIVE10_BANK2_PIN20_V (1 << 18) +#define PINCTRL_DRIVE10_BANK2_PIN20_MA_MASK (0x3 << 16) +#define PINCTRL_DRIVE10_BANK2_PIN20_MA_OFFSET 16 +#define PINCTRL_DRIVE10_BANK2_PIN19_V (1 << 14) +#define PINCTRL_DRIVE10_BANK2_PIN19_MA_MASK (0x3 << 12) +#define PINCTRL_DRIVE10_BANK2_PIN19_MA_OFFSET 12 +#define PINCTRL_DRIVE10_BANK2_PIN18_V (1 << 10) +#define PINCTRL_DRIVE10_BANK2_PIN18_MA_MASK (0x3 << 8) +#define PINCTRL_DRIVE10_BANK2_PIN18_MA_OFFSET 8 +#define PINCTRL_DRIVE10_BANK2_PIN17_V (1 << 6) +#define PINCTRL_DRIVE10_BANK2_PIN17_MA_MASK (0x3 << 4) +#define PINCTRL_DRIVE10_BANK2_PIN17_MA_OFFSET 4 +#define PINCTRL_DRIVE10_BANK2_PIN16_V (1 << 2) +#define PINCTRL_DRIVE10_BANK2_PIN16_MA_MASK (0x3 << 0) +#define PINCTRL_DRIVE10_BANK2_PIN16_MA_OFFSET 0 + +#define PINCTRL_DRIVE11_BANK2_PIN27_V (1 << 14) +#define PINCTRL_DRIVE11_BANK2_PIN27_MA_MASK (0x3 << 12) +#define PINCTRL_DRIVE11_BANK2_PIN27_MA_OFFSET 12 +#define PINCTRL_DRIVE11_BANK2_PIN26_V (1 << 10) +#define PINCTRL_DRIVE11_BANK2_PIN26_MA_MASK (0x3 << 8) +#define PINCTRL_DRIVE11_BANK2_PIN26_MA_OFFSET 8 +#define PINCTRL_DRIVE11_BANK2_PIN25_V (1 << 6) +#define PINCTRL_DRIVE11_BANK2_PIN25_MA_MASK (0x3 << 4) +#define PINCTRL_DRIVE11_BANK2_PIN25_MA_OFFSET 4 +#define PINCTRL_DRIVE11_BANK2_PIN24_V (1 << 2) +#define PINCTRL_DRIVE11_BANK2_PIN24_MA_MASK (0x3 << 0) +#define PINCTRL_DRIVE11_BANK2_PIN24_MA_OFFSET 0 + +#define PINCTRL_DRIVE12_BANK3_PIN07_V (1 << 30) +#define PINCTRL_DRIVE12_BANK3_PIN07_MA_MASK (0x3 << 28) +#define PINCTRL_DRIVE12_BANK3_PIN07_MA_OFFSET 28 +#define PINCTRL_DRIVE12_BANK3_PIN06_V (1 << 26) +#define PINCTRL_DRIVE12_BANK3_PIN06_MA_MASK (0x3 << 24) +#define PINCTRL_DRIVE12_BANK3_PIN06_MA_OFFSET 24 +#define PINCTRL_DRIVE12_BANK3_PIN05_V (1 << 22) +#define PINCTRL_DRIVE12_BANK3_PIN05_MA_MASK (0x3 << 20) +#define PINCTRL_DRIVE12_BANK3_PIN05_MA_OFFSET 20 +#define PINCTRL_DRIVE12_BANK3_PIN04_V (1 << 18) +#define PINCTRL_DRIVE12_BANK3_PIN04_MA_MASK (0x3 << 16) +#define PINCTRL_DRIVE12_BANK3_PIN04_MA_OFFSET 16 +#define PINCTRL_DRIVE12_BANK3_PIN03_V (1 << 14) +#define PINCTRL_DRIVE12_BANK3_PIN03_MA_MASK (0x3 << 12) +#define PINCTRL_DRIVE12_BANK3_PIN03_MA_OFFSET 12 +#define PINCTRL_DRIVE12_BANK3_PIN02_V (1 << 10) +#define PINCTRL_DRIVE12_BANK3_PIN02_MA_MASK (0x3 << 8) +#define PINCTRL_DRIVE12_BANK3_PIN02_MA_OFFSET 8 +#define PINCTRL_DRIVE12_BANK3_PIN01_V (1 << 6) +#define PINCTRL_DRIVE12_BANK3_PIN01_MA_MASK (0x3 << 4) +#define PINCTRL_DRIVE12_BANK3_PIN01_MA_OFFSET 4 +#define PINCTRL_DRIVE12_BANK3_PIN00_V (1 << 2) +#define PINCTRL_DRIVE12_BANK3_PIN00_MA_MASK (0x3 << 0) +#define PINCTRL_DRIVE12_BANK3_PIN00_MA_OFFSET 0 + +#define PINCTRL_DRIVE13_BANK3_PIN15_V (1 << 30) +#define PINCTRL_DRIVE13_BANK3_PIN15_MA_MASK (0x3 << 28) +#define PINCTRL_DRIVE13_BANK3_PIN15_MA_OFFSET 28 +#define PINCTRL_DRIVE13_BANK3_PIN14_V (1 << 26) +#define PINCTRL_DRIVE13_BANK3_PIN14_MA_MASK (0x3 << 24) +#define PINCTRL_DRIVE13_BANK3_PIN14_MA_OFFSET 24 +#define PINCTRL_DRIVE13_BANK3_PIN13_V (1 << 22) +#define PINCTRL_DRIVE13_BANK3_PIN13_MA_MASK (0x3 << 20) +#define PINCTRL_DRIVE13_BANK3_PIN13_MA_OFFSET 20 +#define PINCTRL_DRIVE13_BANK3_PIN12_V (1 << 18) +#define PINCTRL_DRIVE13_BANK3_PIN12_MA_MASK (0x3 << 16) +#define PINCTRL_DRIVE13_BANK3_PIN12_MA_OFFSET 16 +#define PINCTRL_DRIVE13_BANK3_PIN11_V (1 << 14) +#define PINCTRL_DRIVE13_BANK3_PIN11_MA_MASK (0x3 << 12) +#define PINCTRL_DRIVE13_BANK3_PIN11_MA_OFFSET 12 +#define PINCTRL_DRIVE13_BANK3_PIN10_V (1 << 10) +#define PINCTRL_DRIVE13_BANK3_PIN10_MA_MASK (0x3 << 8) +#define PINCTRL_DRIVE13_BANK3_PIN10_MA_OFFSET 8 +#define PINCTRL_DRIVE13_BANK3_PIN09_V (1 << 6) +#define PINCTRL_DRIVE13_BANK3_PIN09_MA_MASK (0x3 << 4) +#define PINCTRL_DRIVE13_BANK3_PIN09_MA_OFFSET 4 +#define PINCTRL_DRIVE13_BANK3_PIN08_V (1 << 2) +#define PINCTRL_DRIVE13_BANK3_PIN08_MA_MASK (0x3 << 0) +#define PINCTRL_DRIVE13_BANK3_PIN08_MA_OFFSET 0 + +#define PINCTRL_DRIVE14_BANK3_PIN23_V (1 << 30) +#define PINCTRL_DRIVE14_BANK3_PIN23_MA_MASK (0x3 << 28) +#define PINCTRL_DRIVE14_BANK3_PIN23_MA_OFFSET 28 +#define PINCTRL_DRIVE14_BANK3_PIN22_V (1 << 26) +#define PINCTRL_DRIVE14_BANK3_PIN22_MA_MASK (0x3 << 24) +#define PINCTRL_DRIVE14_BANK3_PIN22_MA_OFFSET 24 +#define PINCTRL_DRIVE14_BANK3_PIN21_V (1 << 22) +#define PINCTRL_DRIVE14_BANK3_PIN21_MA_MASK (0x3 << 20) +#define PINCTRL_DRIVE14_BANK3_PIN21_MA_OFFSET 20 +#define PINCTRL_DRIVE14_BANK3_PIN20_V (1 << 18) +#define PINCTRL_DRIVE14_BANK3_PIN20_MA_MASK (0x3 << 16) +#define PINCTRL_DRIVE14_BANK3_PIN20_MA_OFFSET 16 +#define PINCTRL_DRIVE14_BANK3_PIN18_V (1 << 10) +#define PINCTRL_DRIVE14_BANK3_PIN18_MA_MASK (0x3 << 8) +#define PINCTRL_DRIVE14_BANK3_PIN18_MA_OFFSET 8 +#define PINCTRL_DRIVE14_BANK3_PIN17_V (1 << 6) +#define PINCTRL_DRIVE14_BANK3_PIN17_MA_MASK (0x3 << 4) +#define PINCTRL_DRIVE14_BANK3_PIN17_MA_OFFSET 4 +#define PINCTRL_DRIVE14_BANK3_PIN16_V (1 << 2) +#define PINCTRL_DRIVE14_BANK3_PIN16_MA_MASK (0x3 << 0) +#define PINCTRL_DRIVE14_BANK3_PIN16_MA_OFFSET 0 + +#define PINCTRL_DRIVE15_BANK3_PIN30_V (1 << 26) +#define PINCTRL_DRIVE15_BANK3_PIN30_MA_MASK (0x3 << 24) +#define PINCTRL_DRIVE15_BANK3_PIN30_MA_OFFSET 24 +#define PINCTRL_DRIVE15_BANK3_PIN29_V (1 << 22) +#define PINCTRL_DRIVE15_BANK3_PIN29_MA_MASK (0x3 << 20) +#define PINCTRL_DRIVE15_BANK3_PIN29_MA_OFFSET 20 +#define PINCTRL_DRIVE15_BANK3_PIN28_V (1 << 18) +#define PINCTRL_DRIVE15_BANK3_PIN28_MA_MASK (0x3 << 16) +#define PINCTRL_DRIVE15_BANK3_PIN28_MA_OFFSET 16 +#define PINCTRL_DRIVE15_BANK3_PIN27_V (1 << 14) +#define PINCTRL_DRIVE15_BANK3_PIN27_MA_MASK (0x3 << 12) +#define PINCTRL_DRIVE15_BANK3_PIN27_MA_OFFSET 12 +#define PINCTRL_DRIVE15_BANK3_PIN26_V (1 << 10) +#define PINCTRL_DRIVE15_BANK3_PIN26_MA_MASK (0x3 << 8) +#define PINCTRL_DRIVE15_BANK3_PIN26_MA_OFFSET 8 +#define PINCTRL_DRIVE15_BANK3_PIN25_V (1 << 6) +#define PINCTRL_DRIVE15_BANK3_PIN25_MA_MASK (0x3 << 4) +#define PINCTRL_DRIVE15_BANK3_PIN25_MA_OFFSET 4 +#define PINCTRL_DRIVE15_BANK3_PIN24_V (1 << 2) +#define PINCTRL_DRIVE15_BANK3_PIN24_MA_MASK (0x3 << 0) +#define PINCTRL_DRIVE15_BANK3_PIN24_MA_OFFSET 0 + +#define PINCTRL_DRIVE16_BANK4_PIN07_V (1 << 30) +#define PINCTRL_DRIVE16_BANK4_PIN07_MA_MASK (0x3 << 28) +#define PINCTRL_DRIVE16_BANK4_PIN07_MA_OFFSET 28 +#define PINCTRL_DRIVE16_BANK4_PIN06_V (1 << 26) +#define PINCTRL_DRIVE16_BANK4_PIN06_MA_MASK (0x3 << 24) +#define PINCTRL_DRIVE16_BANK4_PIN06_MA_OFFSET 24 +#define PINCTRL_DRIVE16_BANK4_PIN05_V (1 << 22) +#define PINCTRL_DRIVE16_BANK4_PIN05_MA_MASK (0x3 << 20) +#define PINCTRL_DRIVE16_BANK4_PIN05_MA_OFFSET 20 +#define PINCTRL_DRIVE16_BANK4_PIN04_V (1 << 18) +#define PINCTRL_DRIVE16_BANK4_PIN04_MA_MASK (0x3 << 16) +#define PINCTRL_DRIVE16_BANK4_PIN04_MA_OFFSET 16 +#define PINCTRL_DRIVE16_BANK4_PIN03_V (1 << 14) +#define PINCTRL_DRIVE16_BANK4_PIN03_MA_MASK (0x3 << 12) +#define PINCTRL_DRIVE16_BANK4_PIN03_MA_OFFSET 12 +#define PINCTRL_DRIVE16_BANK4_PIN02_V (1 << 10) +#define PINCTRL_DRIVE16_BANK4_PIN02_MA_MASK (0x3 << 8) +#define PINCTRL_DRIVE16_BANK4_PIN02_MA_OFFSET 8 +#define PINCTRL_DRIVE16_BANK4_PIN01_V (1 << 6) +#define PINCTRL_DRIVE16_BANK4_PIN01_MA_MASK (0x3 << 4) +#define PINCTRL_DRIVE16_BANK4_PIN01_MA_OFFSET 4 +#define PINCTRL_DRIVE16_BANK4_PIN00_V (1 << 2) +#define PINCTRL_DRIVE16_BANK4_PIN00_MA_MASK (0x3 << 0) +#define PINCTRL_DRIVE16_BANK4_PIN00_MA_OFFSET 0 + +#define PINCTRL_DRIVE17_BANK4_PIN15_V (1 << 30) +#define PINCTRL_DRIVE17_BANK4_PIN15_MA_MASK (0x3 << 28) +#define PINCTRL_DRIVE17_BANK4_PIN15_MA_OFFSET 28 +#define PINCTRL_DRIVE17_BANK4_PIN14_V (1 << 26) +#define PINCTRL_DRIVE17_BANK4_PIN14_MA_MASK (0x3 << 24) +#define PINCTRL_DRIVE17_BANK4_PIN14_MA_OFFSET 24 +#define PINCTRL_DRIVE17_BANK4_PIN13_V (1 << 22) +#define PINCTRL_DRIVE17_BANK4_PIN13_MA_MASK (0x3 << 20) +#define PINCTRL_DRIVE17_BANK4_PIN13_MA_OFFSET 20 +#define PINCTRL_DRIVE17_BANK4_PIN12_V (1 << 18) +#define PINCTRL_DRIVE17_BANK4_PIN12_MA_MASK (0x3 << 16) +#define PINCTRL_DRIVE17_BANK4_PIN12_MA_OFFSET 16 +#define PINCTRL_DRIVE17_BANK4_PIN11_V (1 << 14) +#define PINCTRL_DRIVE17_BANK4_PIN11_MA_MASK (0x3 << 12) +#define PINCTRL_DRIVE17_BANK4_PIN11_MA_OFFSET 12 +#define PINCTRL_DRIVE17_BANK4_PIN10_V (1 << 10) +#define PINCTRL_DRIVE17_BANK4_PIN10_MA_MASK (0x3 << 8) +#define PINCTRL_DRIVE17_BANK4_PIN10_MA_OFFSET 8 +#define PINCTRL_DRIVE17_BANK4_PIN09_V (1 << 6) +#define PINCTRL_DRIVE17_BANK4_PIN09_MA_MASK (0x3 << 4) +#define PINCTRL_DRIVE17_BANK4_PIN09_MA_OFFSET 4 +#define PINCTRL_DRIVE17_BANK4_PIN08_V (1 << 2) +#define PINCTRL_DRIVE17_BANK4_PIN08_MA_MASK (0x3 << 0) +#define PINCTRL_DRIVE17_BANK4_PIN08_MA_OFFSET 0 + +#define PINCTRL_DRIVE18_BANK4_PIN20_V (1 << 18) +#define PINCTRL_DRIVE18_BANK4_PIN20_MA_MASK (0x3 << 16) +#define PINCTRL_DRIVE18_BANK4_PIN20_MA_OFFSET 16 +#define PINCTRL_DRIVE18_BANK4_PIN16_V (1 << 2) +#define PINCTRL_DRIVE18_BANK4_PIN16_MA_MASK (0x3 << 0) +#define PINCTRL_DRIVE18_BANK4_PIN16_MA_OFFSET 0 + +#define PINCTRL_PULL0_BANK0_PIN28 (1 << 28) +#define PINCTRL_PULL0_BANK0_PIN27 (1 << 27) +#define PINCTRL_PULL0_BANK0_PIN26 (1 << 26) +#define PINCTRL_PULL0_BANK0_PIN25 (1 << 25) +#define PINCTRL_PULL0_BANK0_PIN24 (1 << 24) +#define PINCTRL_PULL0_BANK0_PIN23 (1 << 23) +#define PINCTRL_PULL0_BANK0_PIN22 (1 << 22) +#define PINCTRL_PULL0_BANK0_PIN21 (1 << 21) +#define PINCTRL_PULL0_BANK0_PIN20 (1 << 20) +#define PINCTRL_PULL0_BANK0_PIN19 (1 << 19) +#define PINCTRL_PULL0_BANK0_PIN18 (1 << 18) +#define PINCTRL_PULL0_BANK0_PIN17 (1 << 17) +#define PINCTRL_PULL0_BANK0_PIN16 (1 << 16) +#define PINCTRL_PULL0_BANK0_PIN07 (1 << 7) +#define PINCTRL_PULL0_BANK0_PIN06 (1 << 6) +#define PINCTRL_PULL0_BANK0_PIN05 (1 << 5) +#define PINCTRL_PULL0_BANK0_PIN04 (1 << 4) +#define PINCTRL_PULL0_BANK0_PIN03 (1 << 3) +#define PINCTRL_PULL0_BANK0_PIN02 (1 << 2) +#define PINCTRL_PULL0_BANK0_PIN01 (1 << 1) +#define PINCTRL_PULL0_BANK0_PIN00 (1 << 0) + +#define PINCTRL_PULL1_BANK1_PIN31 (1 << 31) +#define PINCTRL_PULL1_BANK1_PIN30 (1 << 30) +#define PINCTRL_PULL1_BANK1_PIN29 (1 << 29) +#define PINCTRL_PULL1_BANK1_PIN28 (1 << 28) +#define PINCTRL_PULL1_BANK1_PIN27 (1 << 27) +#define PINCTRL_PULL1_BANK1_PIN26 (1 << 26) +#define PINCTRL_PULL1_BANK1_PIN25 (1 << 25) +#define PINCTRL_PULL1_BANK1_PIN24 (1 << 24) +#define PINCTRL_PULL1_BANK1_PIN23 (1 << 23) +#define PINCTRL_PULL1_BANK1_PIN22 (1 << 22) +#define PINCTRL_PULL1_BANK1_PIN21 (1 << 21) +#define PINCTRL_PULL1_BANK1_PIN20 (1 << 20) +#define PINCTRL_PULL1_BANK1_PIN19 (1 << 19) +#define PINCTRL_PULL1_BANK1_PIN18 (1 << 18) +#define PINCTRL_PULL1_BANK1_PIN17 (1 << 17) +#define PINCTRL_PULL1_BANK1_PIN16 (1 << 16) +#define PINCTRL_PULL1_BANK1_PIN15 (1 << 15) +#define PINCTRL_PULL1_BANK1_PIN14 (1 << 14) +#define PINCTRL_PULL1_BANK1_PIN13 (1 << 13) +#define PINCTRL_PULL1_BANK1_PIN12 (1 << 12) +#define PINCTRL_PULL1_BANK1_PIN11 (1 << 11) +#define PINCTRL_PULL1_BANK1_PIN10 (1 << 10) +#define PINCTRL_PULL1_BANK1_PIN09 (1 << 9) +#define PINCTRL_PULL1_BANK1_PIN08 (1 << 8) +#define PINCTRL_PULL1_BANK1_PIN07 (1 << 7) +#define PINCTRL_PULL1_BANK1_PIN06 (1 << 6) +#define PINCTRL_PULL1_BANK1_PIN05 (1 << 5) +#define PINCTRL_PULL1_BANK1_PIN04 (1 << 4) +#define PINCTRL_PULL1_BANK1_PIN03 (1 << 3) +#define PINCTRL_PULL1_BANK1_PIN02 (1 << 2) +#define PINCTRL_PULL1_BANK1_PIN01 (1 << 1) +#define PINCTRL_PULL1_BANK1_PIN00 (1 << 0) + +#define PINCTRL_PULL2_BANK2_PIN27 (1 << 27) +#define PINCTRL_PULL2_BANK2_PIN26 (1 << 26) +#define PINCTRL_PULL2_BANK2_PIN25 (1 << 25) +#define PINCTRL_PULL2_BANK2_PIN24 (1 << 24) +#define PINCTRL_PULL2_BANK2_PIN21 (1 << 21) +#define PINCTRL_PULL2_BANK2_PIN20 (1 << 20) +#define PINCTRL_PULL2_BANK2_PIN19 (1 << 19) +#define PINCTRL_PULL2_BANK2_PIN18 (1 << 18) +#define PINCTRL_PULL2_BANK2_PIN17 (1 << 17) +#define PINCTRL_PULL2_BANK2_PIN16 (1 << 16) +#define PINCTRL_PULL2_BANK2_PIN15 (1 << 15) +#define PINCTRL_PULL2_BANK2_PIN14 (1 << 14) +#define PINCTRL_PULL2_BANK2_PIN13 (1 << 13) +#define PINCTRL_PULL2_BANK2_PIN12 (1 << 12) +#define PINCTRL_PULL2_BANK2_PIN10 (1 << 10) +#define PINCTRL_PULL2_BANK2_PIN09 (1 << 9) +#define PINCTRL_PULL2_BANK2_PIN08 (1 << 8) +#define PINCTRL_PULL2_BANK2_PIN07 (1 << 7) +#define PINCTRL_PULL2_BANK2_PIN06 (1 << 6) +#define PINCTRL_PULL2_BANK2_PIN05 (1 << 5) +#define PINCTRL_PULL2_BANK2_PIN04 (1 << 4) +#define PINCTRL_PULL2_BANK2_PIN03 (1 << 3) +#define PINCTRL_PULL2_BANK2_PIN02 (1 << 2) +#define PINCTRL_PULL2_BANK2_PIN01 (1 << 1) +#define PINCTRL_PULL2_BANK2_PIN00 (1 << 0) + +#define PINCTRL_PULL3_BANK3_PIN30 (1 << 30) +#define PINCTRL_PULL3_BANK3_PIN29 (1 << 29) +#define PINCTRL_PULL3_BANK3_PIN28 (1 << 28) +#define PINCTRL_PULL3_BANK3_PIN27 (1 << 27) +#define PINCTRL_PULL3_BANK3_PIN26 (1 << 26) +#define PINCTRL_PULL3_BANK3_PIN25 (1 << 25) +#define PINCTRL_PULL3_BANK3_PIN24 (1 << 24) +#define PINCTRL_PULL3_BANK3_PIN23 (1 << 23) +#define PINCTRL_PULL3_BANK3_PIN22 (1 << 22) +#define PINCTRL_PULL3_BANK3_PIN21 (1 << 21) +#define PINCTRL_PULL3_BANK3_PIN20 (1 << 20) +#define PINCTRL_PULL3_BANK3_PIN18 (1 << 18) +#define PINCTRL_PULL3_BANK3_PIN17 (1 << 17) +#define PINCTRL_PULL3_BANK3_PIN16 (1 << 16) +#define PINCTRL_PULL3_BANK3_PIN15 (1 << 15) +#define PINCTRL_PULL3_BANK3_PIN14 (1 << 14) +#define PINCTRL_PULL3_BANK3_PIN13 (1 << 13) +#define PINCTRL_PULL3_BANK3_PIN12 (1 << 12) +#define PINCTRL_PULL3_BANK3_PIN11 (1 << 11) +#define PINCTRL_PULL3_BANK3_PIN10 (1 << 10) +#define PINCTRL_PULL3_BANK3_PIN09 (1 << 9) +#define PINCTRL_PULL3_BANK3_PIN08 (1 << 8) +#define PINCTRL_PULL3_BANK3_PIN07 (1 << 7) +#define PINCTRL_PULL3_BANK3_PIN06 (1 << 6) +#define PINCTRL_PULL3_BANK3_PIN05 (1 << 5) +#define PINCTRL_PULL3_BANK3_PIN04 (1 << 4) +#define PINCTRL_PULL3_BANK3_PIN03 (1 << 3) +#define PINCTRL_PULL3_BANK3_PIN02 (1 << 2) +#define PINCTRL_PULL3_BANK3_PIN01 (1 << 1) +#define PINCTRL_PULL3_BANK3_PIN00 (1 << 0) + +#define PINCTRL_PULL4_BANK4_PIN20 (1 << 20) +#define PINCTRL_PULL4_BANK4_PIN16 (1 << 16) +#define PINCTRL_PULL4_BANK4_PIN15 (1 << 15) +#define PINCTRL_PULL4_BANK4_PIN14 (1 << 14) +#define PINCTRL_PULL4_BANK4_PIN13 (1 << 13) +#define PINCTRL_PULL4_BANK4_PIN12 (1 << 12) +#define PINCTRL_PULL4_BANK4_PIN11 (1 << 11) +#define PINCTRL_PULL4_BANK4_PIN10 (1 << 10) +#define PINCTRL_PULL4_BANK4_PIN09 (1 << 9) +#define PINCTRL_PULL4_BANK4_PIN08 (1 << 8) +#define PINCTRL_PULL4_BANK4_PIN07 (1 << 7) +#define PINCTRL_PULL4_BANK4_PIN06 (1 << 6) +#define PINCTRL_PULL4_BANK4_PIN05 (1 << 5) +#define PINCTRL_PULL4_BANK4_PIN04 (1 << 4) +#define PINCTRL_PULL4_BANK4_PIN03 (1 << 3) +#define PINCTRL_PULL4_BANK4_PIN02 (1 << 2) +#define PINCTRL_PULL4_BANK4_PIN01 (1 << 1) +#define PINCTRL_PULL4_BANK4_PIN00 (1 << 0) + +#define PINCTRL_PULL5_BANK5_PIN26 (1 << 26) +#define PINCTRL_PULL5_BANK5_PIN23 (1 << 23) +#define PINCTRL_PULL5_BANK5_PIN22 (1 << 22) +#define PINCTRL_PULL5_BANK5_PIN21 (1 << 21) +#define PINCTRL_PULL5_BANK5_PIN20 (1 << 20) +#define PINCTRL_PULL5_BANK5_PIN19 (1 << 19) +#define PINCTRL_PULL5_BANK5_PIN18 (1 << 18) +#define PINCTRL_PULL5_BANK5_PIN17 (1 << 17) +#define PINCTRL_PULL5_BANK5_PIN16 (1 << 16) +#define PINCTRL_PULL5_BANK5_PIN15 (1 << 15) +#define PINCTRL_PULL5_BANK5_PIN14 (1 << 14) +#define PINCTRL_PULL5_BANK5_PIN13 (1 << 13) +#define PINCTRL_PULL5_BANK5_PIN12 (1 << 12) +#define PINCTRL_PULL5_BANK5_PIN11 (1 << 11) +#define PINCTRL_PULL5_BANK5_PIN10 (1 << 10) +#define PINCTRL_PULL5_BANK5_PIN09 (1 << 9) +#define PINCTRL_PULL5_BANK5_PIN08 (1 << 8) +#define PINCTRL_PULL5_BANK5_PIN07 (1 << 7) +#define PINCTRL_PULL5_BANK5_PIN06 (1 << 6) +#define PINCTRL_PULL5_BANK5_PIN05 (1 << 5) +#define PINCTRL_PULL5_BANK5_PIN04 (1 << 4) +#define PINCTRL_PULL5_BANK5_PIN03 (1 << 3) +#define PINCTRL_PULL5_BANK5_PIN02 (1 << 2) +#define PINCTRL_PULL5_BANK5_PIN01 (1 << 1) +#define PINCTRL_PULL5_BANK5_PIN00 (1 << 0) + +#define PINCTRL_PULL6_BANK6_PIN24 (1 << 24) +#define PINCTRL_PULL6_BANK6_PIN23 (1 << 23) +#define PINCTRL_PULL6_BANK6_PIN22 (1 << 22) +#define PINCTRL_PULL6_BANK6_PIN21 (1 << 21) +#define PINCTRL_PULL6_BANK6_PIN20 (1 << 20) +#define PINCTRL_PULL6_BANK6_PIN19 (1 << 19) +#define PINCTRL_PULL6_BANK6_PIN18 (1 << 18) +#define PINCTRL_PULL6_BANK6_PIN17 (1 << 17) +#define PINCTRL_PULL6_BANK6_PIN16 (1 << 16) +#define PINCTRL_PULL6_BANK6_PIN14 (1 << 14) +#define PINCTRL_PULL6_BANK6_PIN13 (1 << 13) +#define PINCTRL_PULL6_BANK6_PIN12 (1 << 12) +#define PINCTRL_PULL6_BANK6_PIN11 (1 << 11) +#define PINCTRL_PULL6_BANK6_PIN10 (1 << 10) +#define PINCTRL_PULL6_BANK6_PIN09 (1 << 9) +#define PINCTRL_PULL6_BANK6_PIN08 (1 << 8) +#define PINCTRL_PULL6_BANK6_PIN07 (1 << 7) +#define PINCTRL_PULL6_BANK6_PIN06 (1 << 6) +#define PINCTRL_PULL6_BANK6_PIN05 (1 << 5) +#define PINCTRL_PULL6_BANK6_PIN04 (1 << 4) +#define PINCTRL_PULL6_BANK6_PIN03 (1 << 3) +#define PINCTRL_PULL6_BANK6_PIN02 (1 << 2) +#define PINCTRL_PULL6_BANK6_PIN01 (1 << 1) +#define PINCTRL_PULL6_BANK6_PIN00 (1 << 0) + +#define PINCTRL_DOUT0_DOUT_MASK 0x1fffffff +#define PINCTRL_DOUT0_DOUT_OFFSET 0 + +#define PINCTRL_DOUT1_DOUT_MASK 0xffffffff +#define PINCTRL_DOUT1_DOUT_OFFSET 0 + +#define PINCTRL_DOUT2_DOUT_MASK 0xfffffff +#define PINCTRL_DOUT2_DOUT_OFFSET 0 + +#define PINCTRL_DOUT3_DOUT_MASK 0x7fffffff +#define PINCTRL_DOUT3_DOUT_OFFSET 0 + +#define PINCTRL_DOUT4_DOUT_MASK 0x1fffff +#define PINCTRL_DOUT4_DOUT_OFFSET 0 + +#define PINCTRL_DIN0_DIN_MASK 0x1fffffff +#define PINCTRL_DIN0_DIN_OFFSET 0 + +#define PINCTRL_DIN1_DIN_MASK 0xffffffff +#define PINCTRL_DIN1_DIN_OFFSET 0 + +#define PINCTRL_DIN2_DIN_MASK 0xfffffff +#define PINCTRL_DIN2_DIN_OFFSET 0 + +#define PINCTRL_DIN3_DIN_MASK 0x7fffffff +#define PINCTRL_DIN3_DIN_OFFSET 0 + +#define PINCTRL_DIN4_DIN_MASK 0x1fffff +#define PINCTRL_DIN4_DIN_OFFSET 0 + +#define PINCTRL_DOE0_DOE_MASK 0x1fffffff +#define PINCTRL_DOE0_DOE_OFFSET 0 + +#define PINCTRL_DOE1_DOE_MASK 0xffffffff +#define PINCTRL_DOE1_DOE_OFFSET 0 + +#define PINCTRL_DOE2_DOE_MASK 0xfffffff +#define PINCTRL_DOE2_DOE_OFFSET 0 + +#define PINCTRL_DOE3_DOE_MASK 0x7fffffff +#define PINCTRL_DOE3_DOE_OFFSET 0 + +#define PINCTRL_DOE4_DOE_MASK 0x1fffff +#define PINCTRL_DOE4_DOE_OFFSET 0 + +#define PINCTRL_PIN2IRQ0_PIN2IRQ_MASK 0x1fffffff +#define PINCTRL_PIN2IRQ0_PIN2IRQ_OFFSET 0 + +#define PINCTRL_PIN2IRQ1_PIN2IRQ_MASK 0xffffffff +#define PINCTRL_PIN2IRQ1_PIN2IRQ_OFFSET 0 + +#define PINCTRL_PIN2IRQ2_PIN2IRQ_MASK 0xfffffff +#define PINCTRL_PIN2IRQ2_PIN2IRQ_OFFSET 0 + +#define PINCTRL_PIN2IRQ3_PIN2IRQ_MASK 0x7fffffff +#define PINCTRL_PIN2IRQ3_PIN2IRQ_OFFSET 0 + +#define PINCTRL_PIN2IRQ4_PIN2IRQ_MASK 0x1fffff +#define PINCTRL_PIN2IRQ4_PIN2IRQ_OFFSET 0 + +#define PINCTRL_IRQEN0_IRQEN_MASK 0x1fffffff +#define PINCTRL_IRQEN0_IRQEN_OFFSET 0 + +#define PINCTRL_IRQEN1_IRQEN_MASK 0xffffffff +#define PINCTRL_IRQEN1_IRQEN_OFFSET 0 + +#define PINCTRL_IRQEN2_IRQEN_MASK 0xfffffff +#define PINCTRL_IRQEN2_IRQEN_OFFSET 0 + +#define PINCTRL_IRQEN3_IRQEN_MASK 0x7fffffff +#define PINCTRL_IRQEN3_IRQEN_OFFSET 0 + +#define PINCTRL_IRQEN4_IRQEN_MASK 0x1fffff +#define PINCTRL_IRQEN4_IRQEN_OFFSET 0 + +#define PINCTRL_IRQLEVEL0_IRQLEVEL_MASK 0x1fffffff +#define PINCTRL_IRQLEVEL0_IRQLEVEL_OFFSET 0 + +#define PINCTRL_IRQLEVEL1_IRQLEVEL_MASK 0xffffffff +#define PINCTRL_IRQLEVEL1_IRQLEVEL_OFFSET 0 + +#define PINCTRL_IRQLEVEL2_IRQLEVEL_MASK 0xfffffff +#define PINCTRL_IRQLEVEL2_IRQLEVEL_OFFSET 0 + +#define PINCTRL_IRQLEVEL3_IRQLEVEL_MASK 0x7fffffff +#define PINCTRL_IRQLEVEL3_IRQLEVEL_OFFSET 0 + +#define PINCTRL_IRQLEVEL4_IRQLEVEL_MASK 0x1fffff +#define PINCTRL_IRQLEVEL4_IRQLEVEL_OFFSET 0 + +#define PINCTRL_IRQPOL0_IRQPOL_MASK 0x1fffffff +#define PINCTRL_IRQPOL0_IRQPOL_OFFSET 0 + +#define PINCTRL_IRQPOL1_IRQPOL_MASK 0xffffffff +#define PINCTRL_IRQPOL1_IRQPOL_OFFSET 0 + +#define PINCTRL_IRQPOL2_IRQPOL_MASK 0xfffffff +#define PINCTRL_IRQPOL2_IRQPOL_OFFSET 0 + +#define PINCTRL_IRQPOL3_IRQPOL_MASK 0x7fffffff +#define PINCTRL_IRQPOL3_IRQPOL_OFFSET 0 + +#define PINCTRL_IRQPOL4_IRQPOL_MASK 0x1fffff +#define PINCTRL_IRQPOL4_IRQPOL_OFFSET 0 + +#define PINCTRL_IRQSTAT0_IRQSTAT_MASK 0x1fffffff +#define PINCTRL_IRQSTAT0_IRQSTAT_OFFSET 0 + +#define PINCTRL_IRQSTAT1_IRQSTAT_MASK 0xffffffff +#define PINCTRL_IRQSTAT1_IRQSTAT_OFFSET 0 + +#define PINCTRL_IRQSTAT2_IRQSTAT_MASK 0xfffffff +#define PINCTRL_IRQSTAT2_IRQSTAT_OFFSET 0 + +#define PINCTRL_IRQSTAT3_IRQSTAT_MASK 0x7fffffff +#define PINCTRL_IRQSTAT3_IRQSTAT_OFFSET 0 + +#define PINCTRL_IRQSTAT4_IRQSTAT_MASK 0x1fffff +#define PINCTRL_IRQSTAT4_IRQSTAT_OFFSET 0 + +#define PINCTRL_EMI_ODT_CTRL_ADDRESS_CALIB_MASK (0x3 << 26) +#define PINCTRL_EMI_ODT_CTRL_ADDRESS_CALIB_OFFSET 26 +#define PINCTRL_EMI_ODT_CTRL_ADDRESS_TLOAD_MASK (0x3 << 24) +#define PINCTRL_EMI_ODT_CTRL_ADDRESS_TLOAD_OFFSET 24 +#define PINCTRL_EMI_ODT_CTRL_CONTROL_CALIB_MASK (0x3 << 22) +#define PINCTRL_EMI_ODT_CTRL_CONTROL_CALIB_OFFSET 22 +#define PINCTRL_EMI_ODT_CTRL_CONTROL_TLOAD_MASK (0x3 << 20) +#define PINCTRL_EMI_ODT_CTRL_CONTROL_TLOAD_OFFSET 20 +#define PINCTRL_EMI_ODT_CTRL_DUALPAD_CALIB_MASK (0x3 << 18) +#define PINCTRL_EMI_ODT_CTRL_DUALPAD_CALIB_OFFSET 18 +#define PINCTRL_EMI_ODT_CTRL_DUALPAD_TLOAD_MASK (0x3 << 16) +#define PINCTRL_EMI_ODT_CTRL_DUALPAD_TLOAD_OFFSET 16 +#define PINCTRL_EMI_ODT_CTRL_SLICE3_CALIB_MASK (0x3 << 14) +#define PINCTRL_EMI_ODT_CTRL_SLICE3_CALIB_OFFSET 14 +#define PINCTRL_EMI_ODT_CTRL_SLICE3_TLOAD_MASK (0x3 << 12) +#define PINCTRL_EMI_ODT_CTRL_SLICE3_TLOAD_OFFSET 12 +#define PINCTRL_EMI_ODT_CTRL_SLICE2_CALIB_MASK (0x3 << 10) +#define PINCTRL_EMI_ODT_CTRL_SLICE2_CALIB_OFFSET 10 +#define PINCTRL_EMI_ODT_CTRL_SLICE2_TLOAD_MASK (0x3 << 8) +#define PINCTRL_EMI_ODT_CTRL_SLICE2_TLOAD_OFFSET 8 +#define PINCTRL_EMI_ODT_CTRL_SLICE1_CALIB_MASK (0x3 << 6) +#define PINCTRL_EMI_ODT_CTRL_SLICE1_CALIB_OFFSET 6 +#define PINCTRL_EMI_ODT_CTRL_SLICE1_TLOAD_MASK (0x3 << 4) +#define PINCTRL_EMI_ODT_CTRL_SLICE1_TLOAD_OFFSET 4 +#define PINCTRL_EMI_ODT_CTRL_SLICE0_CALIB_MASK (0x3 << 2) +#define PINCTRL_EMI_ODT_CTRL_SLICE0_CALIB_OFFSET 2 +#define PINCTRL_EMI_ODT_CTRL_SLICE0_TLOAD_MASK (0x3 << 0) +#define PINCTRL_EMI_ODT_CTRL_SLICE0_TLOAD_OFFSET 0 + +#define PINCTRL_EMI_DS_CTRL_DDR_MODE_MASK (0x3 << 16) +#define PINCTRL_EMI_DS_CTRL_DDR_MODE_OFFSET 16 +#define PINCTRL_EMI_DS_CTRL_DDR_MODE_mDDR (0x0 << 16) +#define PINCTRL_EMI_DS_CTRL_DDR_MODE_GPIO (0x1 << 16) +#define PINCTRL_EMI_DS_CTRL_DDR_MODE_LVDDR2 (0x2 << 16) +#define PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2 (0x3 << 16) +#define PINCTRL_EMI_DS_CTRL_ADDRESS_MA_MASK (0x3 << 12) +#define PINCTRL_EMI_DS_CTRL_ADDRESS_MA_OFFSET 12 +#define PINCTRL_EMI_DS_CTRL_CONTROL_MA_MASK (0x3 << 10) +#define PINCTRL_EMI_DS_CTRL_CONTROL_MA_OFFSET 10 +#define PINCTRL_EMI_DS_CTRL_DUALPAD_MA_MASK (0x3 << 8) +#define PINCTRL_EMI_DS_CTRL_DUALPAD_MA_OFFSET 8 +#define PINCTRL_EMI_DS_CTRL_SLICE3_MA_MASK (0x3 << 6) +#define PINCTRL_EMI_DS_CTRL_SLICE3_MA_OFFSET 6 +#define PINCTRL_EMI_DS_CTRL_SLICE2_MA_MASK (0x3 << 4) +#define PINCTRL_EMI_DS_CTRL_SLICE2_MA_OFFSET 4 +#define PINCTRL_EMI_DS_CTRL_SLICE1_MA_MASK (0x3 << 2) +#define PINCTRL_EMI_DS_CTRL_SLICE1_MA_OFFSET 2 +#define PINCTRL_EMI_DS_CTRL_SLICE0_MA_MASK (0x3 << 0) +#define PINCTRL_EMI_DS_CTRL_SLICE0_MA_OFFSET 0 + +#endif /* __MX28_REGS_PINCTRL_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/regs-power.h b/arch/arm/include/asm/arch-mx28/regs-power.h new file mode 100644 index 000000000..9da63adc2 --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/regs-power.h @@ -0,0 +1,413 @@ +/* + * Freescale i.MX28 Power Controller Register Definitions + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __MX28_REGS_POWER_H__ +#define __MX28_REGS_POWER_H__ + +#include <asm/arch/regs-common.h> + +#ifndef __ASSEMBLY__ +struct mx28_power_regs { + mx28_reg(hw_power_ctrl) + mx28_reg(hw_power_5vctrl) + mx28_reg(hw_power_minpwr) + mx28_reg(hw_power_charge) + uint32_t hw_power_vdddctrl; + uint32_t reserved_vddd[3]; + uint32_t hw_power_vddactrl; + uint32_t reserved_vdda[3]; + uint32_t hw_power_vddioctrl; + uint32_t reserved_vddio[3]; + uint32_t hw_power_vddmemctrl; + uint32_t reserved_vddmem[3]; + uint32_t hw_power_dcdc4p2; + uint32_t reserved_dcdc4p2[3]; + uint32_t hw_power_misc; + uint32_t reserved_misc[3]; + uint32_t hw_power_dclimits; + uint32_t reserved_dclimits[3]; + mx28_reg(hw_power_loopctrl) + uint32_t hw_power_sts; + uint32_t reserved_sts[3]; + mx28_reg(hw_power_speed) + uint32_t hw_power_battmonitor; + uint32_t reserved_battmonitor[3]; + + uint32_t reserved[4]; + + mx28_reg(hw_power_reset) + mx28_reg(hw_power_debug) + mx28_reg(hw_power_thermal) + mx28_reg(hw_power_usb1ctrl) + mx28_reg(hw_power_special) + mx28_reg(hw_power_version) + mx28_reg(hw_power_anaclkctrl) + mx28_reg(hw_power_refctrl) +}; +#endif + +#define POWER_CTRL_PSWITCH_MID_TRAN (1 << 27) +#define POWER_CTRL_DCDC4P2_BO_IRQ (1 << 24) +#define POWER_CTRL_ENIRQ_DCDC4P2_BO (1 << 23) +#define POWER_CTRL_VDD5V_DROOP_IRQ (1 << 22) +#define POWER_CTRL_ENIRQ_VDD5V_DROOP (1 << 21) +#define POWER_CTRL_PSWITCH_IRQ (1 << 20) +#define POWER_CTRL_PSWITCH_IRQ_SRC (1 << 19) +#define POWER_CTRL_POLARITY_PSWITCH (1 << 18) +#define POWER_CTRL_ENIRQ_PSWITCH (1 << 17) +#define POWER_CTRL_POLARITY_DC_OK (1 << 16) +#define POWER_CTRL_DC_OK_IRQ (1 << 15) +#define POWER_CTRL_ENIRQ_DC_OK (1 << 14) +#define POWER_CTRL_BATT_BO_IRQ (1 << 13) +#define POWER_CTRL_ENIRQ_BATT_BO (1 << 12) +#define POWER_CTRL_VDDIO_BO_IRQ (1 << 11) +#define POWER_CTRL_ENIRQ_VDDIO_BO (1 << 10) +#define POWER_CTRL_VDDA_BO_IRQ (1 << 9) +#define POWER_CTRL_ENIRQ_VDDA_BO (1 << 8) +#define POWER_CTRL_VDDD_BO_IRQ (1 << 7) +#define POWER_CTRL_ENIRQ_VDDD_BO (1 << 6) +#define POWER_CTRL_POLARITY_VBUSVALID (1 << 5) +#define POWER_CTRL_VBUS_VALID_IRQ (1 << 4) +#define POWER_CTRL_ENIRQ_VBUS_VALID (1 << 3) +#define POWER_CTRL_POLARITY_VDD5V_GT_VDDIO (1 << 2) +#define POWER_CTRL_VDD5V_GT_VDDIO_IRQ (1 << 1) +#define POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO (1 << 0) + +#define POWER_5VCTRL_VBUSDROOP_TRSH_MASK (0x3 << 30) +#define POWER_5VCTRL_VBUSDROOP_TRSH_OFFSET 30 +#define POWER_5VCTRL_VBUSDROOP_TRSH_4V3 (0x0 << 30) +#define POWER_5VCTRL_VBUSDROOP_TRSH_4V4 (0x1 << 30) +#define POWER_5VCTRL_VBUSDROOP_TRSH_4V5 (0x2 << 30) +#define POWER_5VCTRL_VBUSDROOP_TRSH_4V7 (0x3 << 30) +#define POWER_5VCTRL_HEADROOM_ADJ_MASK (0x7 << 24) +#define POWER_5VCTRL_HEADROOM_ADJ_OFFSET 24 +#define POWER_5VCTRL_PWD_CHARGE_4P2_MASK (0x3 << 20) +#define POWER_5VCTRL_PWD_CHARGE_4P2_OFFSET 20 +#define POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK (0x3f << 12) +#define POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET 12 +#define POWER_5VCTRL_VBUSVALID_TRSH_MASK (0x7 << 8) +#define POWER_5VCTRL_VBUSVALID_TRSH_OFFSET 8 +#define POWER_5VCTRL_VBUSVALID_TRSH_2V9 (0x0 << 8) +#define POWER_5VCTRL_VBUSVALID_TRSH_4V0 (0x1 << 8) +#define POWER_5VCTRL_VBUSVALID_TRSH_4V1 (0x2 << 8) +#define POWER_5VCTRL_VBUSVALID_TRSH_4V2 (0x3 << 8) +#define POWER_5VCTRL_VBUSVALID_TRSH_4V3 (0x4 << 8) +#define POWER_5VCTRL_VBUSVALID_TRSH_4V4 (0x5 << 8) +#define POWER_5VCTRL_VBUSVALID_TRSH_4V5 (0x6 << 8) +#define POWER_5VCTRL_VBUSVALID_TRSH_4V6 (0x7 << 8) +#define POWER_5VCTRL_PWDN_5VBRNOUT (1 << 7) +#define POWER_5VCTRL_ENABLE_LINREG_ILIMIT (1 << 6) +#define POWER_5VCTRL_DCDC_XFER (1 << 5) +#define POWER_5VCTRL_VBUSVALID_5VDETECT (1 << 4) +#define POWER_5VCTRL_VBUSVALID_TO_B (1 << 3) +#define POWER_5VCTRL_ILIMIT_EQ_ZERO (1 << 2) +#define POWER_5VCTRL_PWRUP_VBUS_CMPS (1 << 1) +#define POWER_5VCTRL_ENABLE_DCDC (1 << 0) + +#define POWER_MINPWR_LOWPWR_4P2 (1 << 14) +#define POWER_MINPWR_PWD_BO (1 << 12) +#define POWER_MINPWR_USE_VDDXTAL_VBG (1 << 11) +#define POWER_MINPWR_PWD_ANA_CMPS (1 << 10) +#define POWER_MINPWR_ENABLE_OSC (1 << 9) +#define POWER_MINPWR_SELECT_OSC (1 << 8) +#define POWER_MINPWR_FBG_OFF (1 << 7) +#define POWER_MINPWR_DOUBLE_FETS (1 << 6) +#define POWER_MINPWR_HALFFETS (1 << 5) +#define POWER_MINPWR_LESSANA_I (1 << 4) +#define POWER_MINPWR_PWD_XTAL24 (1 << 3) +#define POWER_MINPWR_DC_STOPCLK (1 << 2) +#define POWER_MINPWR_EN_DC_PFM (1 << 1) +#define POWER_MINPWR_DC_HALFCLK (1 << 0) + +#define POWER_CHARGE_ADJ_VOLT_MASK (0x7 << 24) +#define POWER_CHARGE_ADJ_VOLT_OFFSET 24 +#define POWER_CHARGE_ADJ_VOLT_M025P (0x1 << 24) +#define POWER_CHARGE_ADJ_VOLT_P050P (0x2 << 24) +#define POWER_CHARGE_ADJ_VOLT_M075P (0x3 << 24) +#define POWER_CHARGE_ADJ_VOLT_P025P (0x4 << 24) +#define POWER_CHARGE_ADJ_VOLT_M050P (0x5 << 24) +#define POWER_CHARGE_ADJ_VOLT_P075P (0x6 << 24) +#define POWER_CHARGE_ADJ_VOLT_M100P (0x7 << 24) +#define POWER_CHARGE_ENABLE_LOAD (1 << 22) +#define POWER_CHARGE_ENABLE_FAULT_DETECT (1 << 20) +#define POWER_CHARGE_CHRG_STS_OFF (1 << 19) +#define POWER_CHARGE_LIION_4P1 (1 << 18) +#define POWER_CHARGE_PWD_BATTCHRG (1 << 16) +#define POWER_CHARGE_ENABLE_CHARGER_USB1 (1 << 13) +#define POWER_CHARGE_ENABLE_CHARGER_USB0 (1 << 12) +#define POWER_CHARGE_STOP_ILIMIT_MASK (0xf << 8) +#define POWER_CHARGE_STOP_ILIMIT_OFFSET 8 +#define POWER_CHARGE_STOP_ILIMIT_10MA (0x1 << 8) +#define POWER_CHARGE_STOP_ILIMIT_20MA (0x2 << 8) +#define POWER_CHARGE_STOP_ILIMIT_50MA (0x4 << 8) +#define POWER_CHARGE_STOP_ILIMIT_100MA (0x8 << 8) +#define POWER_CHARGE_BATTCHRG_I_MASK 0x3f +#define POWER_CHARGE_BATTCHRG_I_OFFSET 0 +#define POWER_CHARGE_BATTCHRG_I_10MA 0x01 +#define POWER_CHARGE_BATTCHRG_I_20MA 0x02 +#define POWER_CHARGE_BATTCHRG_I_50MA 0x04 +#define POWER_CHARGE_BATTCHRG_I_100MA 0x08 +#define POWER_CHARGE_BATTCHRG_I_200MA 0x10 +#define POWER_CHARGE_BATTCHRG_I_400MA 0x20 + +#define POWER_VDDDCTRL_ADJTN_MASK (0xf << 28) +#define POWER_VDDDCTRL_ADJTN_OFFSET 28 +#define POWER_VDDDCTRL_PWDN_BRNOUT (1 << 23) +#define POWER_VDDDCTRL_DISABLE_STEPPING (1 << 22) +#define POWER_VDDDCTRL_ENABLE_LINREG (1 << 21) +#define POWER_VDDDCTRL_DISABLE_FET (1 << 20) +#define POWER_VDDDCTRL_LINREG_OFFSET_MASK (0x3 << 16) +#define POWER_VDDDCTRL_LINREG_OFFSET_OFFSET 16 +#define POWER_VDDDCTRL_LINREG_OFFSET_0STEPS (0x0 << 16) +#define POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 16) +#define POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 16) +#define POWER_VDDDCTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 16) +#define POWER_VDDDCTRL_BO_OFFSET_MASK (0x7 << 8) +#define POWER_VDDDCTRL_BO_OFFSET_OFFSET 8 +#define POWER_VDDDCTRL_TRG_MASK 0x1f +#define POWER_VDDDCTRL_TRG_OFFSET 0 + +#define POWER_VDDACTRL_PWDN_BRNOUT (1 << 19) +#define POWER_VDDACTRL_DISABLE_STEPPING (1 << 18) +#define POWER_VDDACTRL_ENABLE_LINREG (1 << 17) +#define POWER_VDDACTRL_DISABLE_FET (1 << 16) +#define POWER_VDDACTRL_LINREG_OFFSET_MASK (0x3 << 12) +#define POWER_VDDACTRL_LINREG_OFFSET_OFFSET 12 +#define POWER_VDDACTRL_LINREG_OFFSET_0STEPS (0x0 << 12) +#define POWER_VDDACTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 12) +#define POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 12) +#define POWER_VDDACTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 12) +#define POWER_VDDACTRL_BO_OFFSET_MASK (0x7 << 8) +#define POWER_VDDACTRL_BO_OFFSET_OFFSET 8 +#define POWER_VDDACTRL_TRG_MASK 0x1f +#define POWER_VDDACTRL_TRG_OFFSET 0 + +#define POWER_VDDIOCTRL_ADJTN_MASK (0xf << 20) +#define POWER_VDDIOCTRL_ADJTN_OFFSET 20 +#define POWER_VDDIOCTRL_PWDN_BRNOUT (1 << 18) +#define POWER_VDDIOCTRL_DISABLE_STEPPING (1 << 17) +#define POWER_VDDIOCTRL_DISABLE_FET (1 << 16) +#define POWER_VDDIOCTRL_LINREG_OFFSET_MASK (0x3 << 12) +#define POWER_VDDIOCTRL_LINREG_OFFSET_OFFSET 12 +#define POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS (0x0 << 12) +#define POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 12) +#define POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 12) +#define POWER_VDDIOCTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 12) +#define POWER_VDDIOCTRL_BO_OFFSET_MASK (0x7 << 8) +#define POWER_VDDIOCTRL_BO_OFFSET_OFFSET 8 +#define POWER_VDDIOCTRL_TRG_MASK 0x1f +#define POWER_VDDIOCTRL_TRG_OFFSET 0 + +#define POWER_VDDMEMCTRL_PULLDOWN_ACTIVE (1 << 10) +#define POWER_VDDMEMCTRL_ENABLE_ILIMIT (1 << 9) +#define POWER_VDDMEMCTRL_ENABLE_LINREG (1 << 8) +#define POWER_VDDMEMCTRL_BO_OFFSET_MASK (0x7 << 5) +#define POWER_VDDMEMCTRL_BO_OFFSET_OFFSET 5 +#define POWER_VDDMEMCTRL_TRG_MASK 0x1f +#define POWER_VDDMEMCTRL_TRG_OFFSET 0 + +#define POWER_DCDC4P2_DROPOUT_CTRL_MASK (0xf << 28) +#define POWER_DCDC4P2_DROPOUT_CTRL_OFFSET 28 +#define POWER_DCDC4P2_DROPOUT_CTRL_200MV (0x3 << 30) +#define POWER_DCDC4P2_DROPOUT_CTRL_100MV (0x2 << 30) +#define POWER_DCDC4P2_DROPOUT_CTRL_50MV (0x1 << 30) +#define POWER_DCDC4P2_DROPOUT_CTRL_25MV (0x0 << 30) +#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2 (0x0 << 28) +#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2_LT_BATT (0x1 << 28) +#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL (0x2 << 28) +#define POWER_DCDC4P2_ISTEAL_THRESH_MASK (0x3 << 24) +#define POWER_DCDC4P2_ISTEAL_THRESH_OFFSET 24 +#define POWER_DCDC4P2_ENABLE_4P2 (1 << 23) +#define POWER_DCDC4P2_ENABLE_DCDC (1 << 22) +#define POWER_DCDC4P2_HYST_DIR (1 << 21) +#define POWER_DCDC4P2_HYST_THRESH (1 << 20) +#define POWER_DCDC4P2_TRG_MASK (0x7 << 16) +#define POWER_DCDC4P2_TRG_OFFSET 16 +#define POWER_DCDC4P2_TRG_4V2 (0x0 << 16) +#define POWER_DCDC4P2_TRG_4V1 (0x1 << 16) +#define POWER_DCDC4P2_TRG_4V0 (0x2 << 16) +#define POWER_DCDC4P2_TRG_3V9 (0x3 << 16) +#define POWER_DCDC4P2_TRG_BATT (0x4 << 16) +#define POWER_DCDC4P2_BO_MASK (0x1f << 8) +#define POWER_DCDC4P2_BO_OFFSET 8 +#define POWER_DCDC4P2_CMPTRIP_MASK 0x1f +#define POWER_DCDC4P2_CMPTRIP_OFFSET 0 + +#define POWER_MISC_FREQSEL_MASK (0x7 << 4) +#define POWER_MISC_FREQSEL_OFFSET 4 +#define POWER_MISC_FREQSEL_20MHZ (0x1 << 4) +#define POWER_MISC_FREQSEL_24MHZ (0x2 << 4) +#define POWER_MISC_FREQSEL_19MHZ (0x3 << 4) +#define POWER_MISC_FREQSEL_14MHZ (0x4 << 4) +#define POWER_MISC_FREQSEL_18MHZ (0x5 << 4) +#define POWER_MISC_FREQSEL_21MHZ (0x6 << 4) +#define POWER_MISC_FREQSEL_17MHZ (0x7 << 4) +#define POWER_MISC_DISABLE_FET_BO_LOGIC (1 << 3) +#define POWER_MISC_DELAY_TIMING (1 << 2) +#define POWER_MISC_TEST (1 << 1) +#define POWER_MISC_SEL_PLLCLK (1 << 0) + +#define POWER_DCLIMITS_POSLIMIT_BUCK_MASK (0x7f << 8) +#define POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET 8 +#define POWER_DCLIMITS_NEGLIMIT_MASK 0x7f +#define POWER_DCLIMITS_NETLIMIT_OFFSET 0 + +#define POWER_LOOPCTRL_TOGGLE_DIF (1 << 20) +#define POWER_LOOPCTRL_HYST_SIGN (1 << 19) +#define POWER_LOOPCTRL_EN_CM_HYST (1 << 18) +#define POWER_LOOPCTRL_EN_DF_HYST (1 << 17) +#define POWER_LOOPCTRL_CM_HYST_THRESH (1 << 16) +#define POWER_LOOPCTRL_DF_HYST_THRESH (1 << 15) +#define POWER_LOOPCTRL_RCSCALE_THRESH (1 << 14) +#define POWER_LOOPCTRL_EN_RCSCALE_MASK (0x3 << 12) +#define POWER_LOOPCTRL_EN_RCSCALE_OFFSET 12 +#define POWER_LOOPCTRL_EN_RCSCALE_DIS (0x0 << 12) +#define POWER_LOOPCTRL_EN_RCSCALE_2X (0x1 << 12) +#define POWER_LOOPCTRL_EN_RCSCALE_4X (0x2 << 12) +#define POWER_LOOPCTRL_EN_RCSCALE_8X (0x3 << 12) +#define POWER_LOOPCTRL_DC_FF_MASK (0x7 << 8) +#define POWER_LOOPCTRL_DC_FF_OFFSET 8 +#define POWER_LOOPCTRL_DC_R_MASK (0xf << 4) +#define POWER_LOOPCTRL_DC_R_OFFSET 4 +#define POWER_LOOPCTRL_DC_C_MASK 0x3 +#define POWER_LOOPCTRL_DC_C_OFFSET 0 +#define POWER_LOOPCTRL_DC_C_MAX 0x0 +#define POWER_LOOPCTRL_DC_C_2X 0x1 +#define POWER_LOOPCTRL_DC_C_4X 0x2 +#define POWER_LOOPCTRL_DC_C_MIN 0x3 + +#define POWER_STS_PWRUP_SOURCE_MASK (0x3f << 24) +#define POWER_STS_PWRUP_SOURCE_OFFSET 24 +#define POWER_STS_PWRUP_SOURCE_5V (0x20 << 24) +#define POWER_STS_PWRUP_SOURCE_RTC (0x10 << 24) +#define POWER_STS_PWRUP_SOURCE_PSWITCH_HIGH (0x02 << 24) +#define POWER_STS_PWRUP_SOURCE_PSWITCH_MID (0x01 << 24) +#define POWER_STS_PSWITCH_MASK (0x3 << 20) +#define POWER_STS_PSWITCH_OFFSET 20 +#define POWER_STS_THERMAL_WARNING (1 << 19) +#define POWER_STS_VDDMEM_BO (1 << 18) +#define POWER_STS_AVALID0_STATUS (1 << 17) +#define POWER_STS_BVALID0_STATUS (1 << 16) +#define POWER_STS_VBUSVALID0_STATUS (1 << 15) +#define POWER_STS_SESSEND0_STATUS (1 << 14) +#define POWER_STS_BATT_BO (1 << 13) +#define POWER_STS_VDD5V_FAULT (1 << 12) +#define POWER_STS_CHRGSTS (1 << 11) +#define POWER_STS_DCDC_4P2_BO (1 << 10) +#define POWER_STS_DC_OK (1 << 9) +#define POWER_STS_VDDIO_BO (1 << 8) +#define POWER_STS_VDDA_BO (1 << 7) +#define POWER_STS_VDDD_BO (1 << 6) +#define POWER_STS_VDD5V_GT_VDDIO (1 << 5) +#define POWER_STS_VDD5V_DROOP (1 << 4) +#define POWER_STS_AVALID0 (1 << 3) +#define POWER_STS_BVALID0 (1 << 2) +#define POWER_STS_VBUSVALID0 (1 << 1) +#define POWER_STS_SESSEND0 (1 << 0) + +#define POWER_SPEED_STATUS_MASK (0xffff << 8) +#define POWER_SPEED_STATUS_OFFSET 8 +#define POWER_SPEED_STATUS_SEL_MASK (0x3 << 6) +#define POWER_SPEED_STATUS_SEL_OFFSET 6 +#define POWER_SPEED_STATUS_SEL_DCDC_STAT (0x0 << 6) +#define POWER_SPEED_STATUS_SEL_CORE_STAT (0x1 << 6) +#define POWER_SPEED_STATUS_SEL_ARM_STAT (0x2 << 6) +#define POWER_SPEED_CTRL_MASK 0x3 +#define POWER_SPEED_CTRL_OFFSET 0 +#define POWER_SPEED_CTRL_SS_OFF 0x0 +#define POWER_SPEED_CTRL_SS_ON 0x1 +#define POWER_SPEED_CTRL_SS_ENABLE 0x3 + +#define POWER_BATTMONITOR_BATT_VAL_MASK (0x3ff << 16) +#define POWER_BATTMONITOR_BATT_VAL_OFFSET 16 +#define POWER_BATTMONITOR_PWDN_BATTBRNOUT_5VDETECT_EN (1 << 11) +#define POWER_BATTMONITOR_EN_BATADJ (1 << 10) +#define POWER_BATTMONITOR_PWDN_BATTBRNOUT (1 << 9) +#define POWER_BATTMONITOR_BRWNOUT_PWD (1 << 8) +#define POWER_BATTMONITOR_BRWNOUT_LVL_MASK 0x1f +#define POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET 0 + +#define POWER_RESET_UNLOCK_MASK (0xffff << 16) +#define POWER_RESET_UNLOCK_OFFSET 16 +#define POWER_RESET_UNLOCK_KEY (0x3e77 << 16) +#define POWER_RESET_FASTFALL_PSWITCH_OFF (1 << 2) +#define POWER_RESET_PWD_OFF (1 << 1) +#define POWER_RESET_PWD (1 << 0) + +#define POWER_DEBUG_VBUSVALIDPIOLOCK (1 << 3) +#define POWER_DEBUG_AVALIDPIOLOCK (1 << 2) +#define POWER_DEBUG_BVALIDPIOLOCK (1 << 1) +#define POWER_DEBUG_SESSENDPIOLOCK (1 << 0) + +#define POWER_THERMAL_TEST (1 << 8) +#define POWER_THERMAL_PWD (1 << 7) +#define POWER_THERMAL_LOW_POWER (1 << 6) +#define POWER_THERMAL_OFFSET_ADJ_MASK (0x3 << 4) +#define POWER_THERMAL_OFFSET_ADJ_OFFSET 4 +#define POWER_THERMAL_OFFSET_ADJ_ENABLE (1 << 3) +#define POWER_THERMAL_TEMP_THRESHOLD_MASK 0x7 +#define POWER_THERMAL_TEMP_THRESHOLD_OFFSET 0 + +#define POWER_USB1CTRL_AVALID1 (1 << 3) +#define POWER_USB1CTRL_BVALID1 (1 << 2) +#define POWER_USB1CTRL_VBUSVALID1 (1 << 1) +#define POWER_USB1CTRL_SESSEND1 (1 << 0) + +#define POWER_SPECIAL_TEST_MASK 0xffffffff +#define POWER_SPECIAL_TEST_OFFSET 0 + +#define POWER_VERSION_MAJOR_MASK (0xff << 24) +#define POWER_VERSION_MAJOR_OFFSET 24 +#define POWER_VERSION_MINOR_MASK (0xff << 16) +#define POWER_VERSION_MINOR_OFFSET 16 +#define POWER_VERSION_STEP_MASK 0xffff +#define POWER_VERSION_STEP_OFFSET 0 + +#define POWER_ANACLKCTRL_CLKGATE_0 (1 << 31) +#define POWER_ANACLKCTRL_OUTDIV_MASK (0x7 << 28) +#define POWER_ANACLKCTRL_OUTDIV_OFFSET 28 +#define POWER_ANACLKCTRL_INVERT_OUTCLK (1 << 27) +#define POWER_ANACLKCTRL_CLKGATE_I (1 << 26) +#define POWER_ANACLKCTRL_DITHER_OFF (1 << 10) +#define POWER_ANACLKCTRL_SLOW_DITHER (1 << 9) +#define POWER_ANACLKCTRL_INVERT_INCLK (1 << 8) +#define POWER_ANACLKCTRL_INCLK_SHIFT_MASK (0x3 << 4) +#define POWER_ANACLKCTRL_INCLK_SHIFT_OFFSET 4 +#define POWER_ANACLKCTRL_INDIV_MASK 0x7 +#define POWER_ANACLKCTRL_INDIV_OFFSET 0 + +#define POWER_REFCTRL_FASTSETTLING (1 << 26) +#define POWER_REFCTRL_RAISE_REF (1 << 25) +#define POWER_REFCTRL_XTAL_BGR_BIAS (1 << 24) +#define POWER_REFCTRL_VBG_ADJ_MASK (0x7 << 20) +#define POWER_REFCTRL_VBG_ADJ_OFFSET 20 +#define POWER_REFCTRL_LOW_PWR (1 << 19) +#define POWER_REFCTRL_BIAS_CTRL_MASK (0x3 << 16) +#define POWER_REFCTRL_BIAS_CTRL_OFFSET 16 +#define POWER_REFCTRL_VDDXTAL_TO_VDDD (1 << 14) +#define POWER_REFCTRL_ADJ_ANA (1 << 13) +#define POWER_REFCTRL_ADJ_VAG (1 << 12) +#define POWER_REFCTRL_ANA_REFVAL_MASK (0xf << 8) +#define POWER_REFCTRL_ANA_REFVAL_OFFSET 8 +#define POWER_REFCTRL_VAG_VAL_MASK (0xf << 4) +#define POWER_REFCTRL_VAG_VAL_OFFSET 4 + +#endif /* __MX28_REGS_POWER_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/regs-rtc.h b/arch/arm/include/asm/arch-mx28/regs-rtc.h new file mode 100644 index 000000000..fe2fda965 --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/regs-rtc.h @@ -0,0 +1,147 @@ +/* + * Freescale i.MX28 RTC Register Definitions + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __MX28_REGS_RTC_H__ +#define __MX28_REGS_RTC_H__ + +#include <asm/arch/regs-common.h> + +#ifndef __ASSEMBLY__ +struct mx28_rtc_regs { + mx28_reg(hw_rtc_ctrl) + mx28_reg(hw_rtc_stat) + mx28_reg(hw_rtc_milliseconds) + mx28_reg(hw_rtc_seconds) + mx28_reg(hw_rtc_rtc_alarm) + mx28_reg(hw_rtc_watchdog) + mx28_reg(hw_rtc_persistent0) + mx28_reg(hw_rtc_persistent1) + mx28_reg(hw_rtc_persistent2) + mx28_reg(hw_rtc_persistent3) + mx28_reg(hw_rtc_persistent4) + mx28_reg(hw_rtc_persistent5) + mx28_reg(hw_rtc_debug) + mx28_reg(hw_rtc_version) +}; +#endif + +#define RTC_CTRL_SFTRST (1 << 31) +#define RTC_CTRL_CLKGATE (1 << 30) +#define RTC_CTRL_SUPPRESS_COPY2ANALOG (1 << 6) +#define RTC_CTRL_FORCE_UPDATE (1 << 5) +#define RTC_CTRL_WATCHDOGEN (1 << 4) +#define RTC_CTRL_ONEMSEC_IRQ (1 << 3) +#define RTC_CTRL_ALARM_IRQ (1 << 2) +#define RTC_CTRL_ONEMSEC_IRQ_EN (1 << 1) +#define RTC_CTRL_ALARM_IRQ_EN (1 << 0) + +#define RTC_STAT_RTC_PRESENT (1 << 31) +#define RTC_STAT_ALARM_PRESENT (1 << 30) +#define RTC_STAT_WATCHDOG_PRESENT (1 << 29) +#define RTC_STAT_XTAL32000_PRESENT (1 << 28) +#define RTC_STAT_XTAL32768_PRESENT (1 << 27) +#define RTC_STAT_STALE_REGS_MASK (0xff << 16) +#define RTC_STAT_STALE_REGS_OFFSET 16 +#define RTC_STAT_NEW_REGS_MASK (0xff << 8) +#define RTC_STAT_NEW_REGS_OFFSET 8 + +#define RTC_MILLISECONDS_COUNT_MASK 0xffffffff +#define RTC_MILLISECONDS_COUNT_OFFSET 0 + +#define RTC_SECONDS_COUNT_MASK 0xffffffff +#define RTC_SECONDS_COUNT_OFFSET 0 + +#define RTC_ALARM_VALUE_MASK 0xffffffff +#define RTC_ALARM_VALUE_OFFSET 0 + +#define RTC_WATCHDOG_COUNT_MASK 0xffffffff +#define RTC_WATCHDOG_COUNT_OFFSET 0 + +#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_MASK (0xf << 28) +#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_OFFSET 28 +#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V83 (0x0 << 28) +#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V78 (0x1 << 28) +#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V73 (0x2 << 28) +#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V68 (0x3 << 28) +#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V62 (0x4 << 28) +#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V57 (0x5 << 28) +#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V52 (0x6 << 28) +#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V48 (0x7 << 28) +#define RTC_PERSISTENT0_EXTERNAL_RESET (1 << 21) +#define RTC_PERSISTENT0_THERMAL_RESET (1 << 20) +#define RTC_PERSISTENT0_ENABLE_LRADC_PWRUP (1 << 18) +#define RTC_PERSISTENT0_AUTO_RESTART (1 << 17) +#define RTC_PERSISTENT0_DISABLE_PSWITCH (1 << 16) +#define RTC_PERSISTENT0_LOWERBIAS_MASK (0xf << 14) +#define RTC_PERSISTENT0_LOWERBIAS_OFFSET 14 +#define RTC_PERSISTENT0_LOWERBIAS_NOMINAL (0x0 << 14) +#define RTC_PERSISTENT0_LOWERBIAS_M25P (0x1 << 14) +#define RTC_PERSISTENT0_LOWERBIAS_M50P (0x3 << 14) +#define RTC_PERSISTENT0_DISABLE_XTALOK (1 << 13) +#define RTC_PERSISTENT0_MSEC_RES_MASK (0x1f << 8) +#define RTC_PERSISTENT0_MSEC_RES_OFFSET 8 +#define RTC_PERSISTENT0_MSEC_RES_1MS (0x01 << 8) +#define RTC_PERSISTENT0_MSEC_RES_2MS (0x02 << 8) +#define RTC_PERSISTENT0_MSEC_RES_4MS (0x04 << 8) +#define RTC_PERSISTENT0_MSEC_RES_8MS (0x08 << 8) +#define RTC_PERSISTENT0_MSEC_RES_16MS (0x10 << 8) +#define RTC_PERSISTENT0_ALARM_WAKE (1 << 7) +#define RTC_PERSISTENT0_XTAL32_FREQ (1 << 6) +#define RTC_PERSISTENT0_XTAL32KHZ_PWRUP (1 << 5) +#define RTC_PERSISTENT0_XTAL24KHZ_PWRUP (1 << 4) +#define RTC_PERSISTENT0_LCK_SECS (1 << 3) +#define RTC_PERSISTENT0_ALARM_EN (1 << 2) +#define RTC_PERSISTENT0_ALARM_WAKE_EN (1 << 1) +#define RTC_PERSISTENT0_CLOCKSOURCE (1 << 0) + +#define RTC_PERSISTENT1_GENERAL_MASK 0xffffffff +#define RTC_PERSISTENT1_GENERAL_OFFSET 0 +#define RTC_PERSISTENT1_GENERAL_OTG_ALT_ROLE 0x0080 +#define RTC_PERSISTENT1_GENERAL_OTG_HNP 0x0100 +#define RTC_PERSISTENT1_GENERAL_USB_LPM 0x0200 +#define RTC_PERSISTENT1_GENERAL_SKIP_CHECKDISK 0x0400 +#define RTC_PERSISTENT1_GENERAL_USB_BOOT_PLAYER 0x0800 +#define RTC_PERSISTENT1_GENERAL_ENUM_500MA_2X 0x1000 + +#define RTC_PERSISTENT2_GENERAL_MASK 0xffffffff +#define RTC_PERSISTENT2_GENERAL_OFFSET 0 + +#define RTC_PERSISTENT3_GENERAL_MASK 0xffffffff +#define RTC_PERSISTENT3_GENERAL_OFFSET 0 + +#define RTC_PERSISTENT4_GENERAL_MASK 0xffffffff +#define RTC_PERSISTENT4_GENERAL_OFFSET 0 + +#define RTC_PERSISTENT5_GENERAL_MASK 0xffffffff +#define RTC_PERSISTENT5_GENERAL_OFFSET 0 + +#define RTC_DEBUG_WATCHDOG_RESET_MASK (1 << 1) +#define RTC_DEBUG_WATCHDOG_RESET (1 << 0) + +#define RTC_VERSION_MAJOR_MASK (0xff << 24) +#define RTC_VERSION_MAJOR_OFFSET 24 +#define RTC_VERSION_MINOR_MASK (0xff << 16) +#define RTC_VERSION_MINOR_OFFSET 16 +#define RTC_VERSION_STEP_MASK 0xffff +#define RTC_VERSION_STEP_OFFSET 0 + +#endif /* __MX28_REGS_RTC_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/regs-ssp.h b/arch/arm/include/asm/arch-mx28/regs-ssp.h new file mode 100644 index 000000000..ab3870c14 --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/regs-ssp.h @@ -0,0 +1,349 @@ +/* + * Freescale i.MX28 SSP Register Definitions + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * + * Based on code from LTIB: + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __MX28_REGS_SSP_H__ +#define __MX28_REGS_SSP_H__ + +#include <asm/arch/regs-common.h> + +#ifndef __ASSEMBLY__ +struct mx28_ssp_regs { + mx28_reg(hw_ssp_ctrl0) + mx28_reg(hw_ssp_cmd0) + mx28_reg(hw_ssp_cmd1) + mx28_reg(hw_ssp_xfer_size) + mx28_reg(hw_ssp_block_size) + mx28_reg(hw_ssp_compref) + mx28_reg(hw_ssp_compmask) + mx28_reg(hw_ssp_timing) + mx28_reg(hw_ssp_ctrl1) + mx28_reg(hw_ssp_data) + mx28_reg(hw_ssp_sdresp0) + mx28_reg(hw_ssp_sdresp1) + mx28_reg(hw_ssp_sdresp2) + mx28_reg(hw_ssp_sdresp3) + mx28_reg(hw_ssp_ddr_ctrl) + mx28_reg(hw_ssp_dll_ctrl) + mx28_reg(hw_ssp_status) + mx28_reg(hw_ssp_dll_sts) + mx28_reg(hw_ssp_debug) + mx28_reg(hw_ssp_version) +}; +#endif + +#define SSP_CTRL0_SFTRST (1 << 31) +#define SSP_CTRL0_CLKGATE (1 << 30) +#define SSP_CTRL0_RUN (1 << 29) +#define SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28) +#define SSP_CTRL0_LOCK_CS (1 << 27) +#define SSP_CTRL0_IGNORE_CRC (1 << 26) +#define SSP_CTRL0_READ (1 << 25) +#define SSP_CTRL0_DATA_XFER (1 << 24) +#define SSP_CTRL0_BUS_WIDTH_MASK (0x3 << 22) +#define SSP_CTRL0_BUS_WIDTH_OFFSET 22 +#define SSP_CTRL0_BUS_WIDTH_ONE_BIT (0x0 << 22) +#define SSP_CTRL0_BUS_WIDTH_FOUR_BIT (0x1 << 22) +#define SSP_CTRL0_BUS_WIDTH_EIGHT_BIT (0x2 << 22) +#define SSP_CTRL0_WAIT_FOR_IRQ (1 << 21) +#define SSP_CTRL0_WAIT_FOR_CMD (1 << 20) +#define SSP_CTRL0_LONG_RESP (1 << 19) +#define SSP_CTRL0_CHECK_RESP (1 << 18) +#define SSP_CTRL0_GET_RESP (1 << 17) +#define SSP_CTRL0_ENABLE (1 << 16) + +#define SSP_CMD0_SOFT_TERMINATE (1 << 26) +#define SSP_CMD0_DBL_DATA_RATE_EN (1 << 25) +#define SSP_CMD0_PRIM_BOOT_OP_EN (1 << 24) +#define SSP_CMD0_BOOT_ACK_EN (1 << 23) +#define SSP_CMD0_SLOW_CLKING_EN (1 << 22) +#define SSP_CMD0_CONT_CLKING_EN (1 << 21) +#define SSP_CMD0_APPEND_8CYC (1 << 20) +#define SSP_CMD0_CMD_MASK 0xff +#define SSP_CMD0_CMD_OFFSET 0 +#define SSP_CMD0_CMD_MMC_GO_IDLE_STATE 0x00 +#define SSP_CMD0_CMD_MMC_SEND_OP_COND 0x01 +#define SSP_CMD0_CMD_MMC_ALL_SEND_CID 0x02 +#define SSP_CMD0_CMD_MMC_SET_RELATIVE_ADDR 0x03 +#define SSP_CMD0_CMD_MMC_SET_DSR 0x04 +#define SSP_CMD0_CMD_MMC_RESERVED_5 0x05 +#define SSP_CMD0_CMD_MMC_SWITCH 0x06 +#define SSP_CMD0_CMD_MMC_SELECT_DESELECT_CARD 0x07 +#define SSP_CMD0_CMD_MMC_SEND_EXT_CSD 0x08 +#define SSP_CMD0_CMD_MMC_SEND_CSD 0x09 +#define SSP_CMD0_CMD_MMC_SEND_CID 0x0a +#define SSP_CMD0_CMD_MMC_READ_DAT_UNTIL_STOP 0x0b +#define SSP_CMD0_CMD_MMC_STOP_TRANSMISSION 0x0c +#define SSP_CMD0_CMD_MMC_SEND_STATUS 0x0d +#define SSP_CMD0_CMD_MMC_BUSTEST_R 0x0e +#define SSP_CMD0_CMD_MMC_GO_INACTIVE_STATE 0x0f +#define SSP_CMD0_CMD_MMC_SET_BLOCKLEN 0x10 +#define SSP_CMD0_CMD_MMC_READ_SINGLE_BLOCK 0x11 +#define SSP_CMD0_CMD_MMC_READ_MULTIPLE_BLOCK 0x12 +#define SSP_CMD0_CMD_MMC_BUSTEST_W 0x13 +#define SSP_CMD0_CMD_MMC_WRITE_DAT_UNTIL_STOP 0x14 +#define SSP_CMD0_CMD_MMC_SET_BLOCK_COUNT 0x17 +#define SSP_CMD0_CMD_MMC_WRITE_BLOCK 0x18 +#define SSP_CMD0_CMD_MMC_WRITE_MULTIPLE_BLOCK 0x19 +#define SSP_CMD0_CMD_MMC_PROGRAM_CID 0x1a +#define SSP_CMD0_CMD_MMC_PROGRAM_CSD 0x1b +#define SSP_CMD0_CMD_MMC_SET_WRITE_PROT 0x1c +#define SSP_CMD0_CMD_MMC_CLR_WRITE_PROT 0x1d +#define SSP_CMD0_CMD_MMC_SEND_WRITE_PROT 0x1e +#define SSP_CMD0_CMD_MMC_ERASE_GROUP_START 0x23 +#define SSP_CMD0_CMD_MMC_ERASE_GROUP_END 0x24 +#define SSP_CMD0_CMD_MMC_ERASE 0x26 +#define SSP_CMD0_CMD_MMC_FAST_IO 0x27 +#define SSP_CMD0_CMD_MMC_GO_IRQ_STATE 0x28 +#define SSP_CMD0_CMD_MMC_LOCK_UNLOCK 0x2a +#define SSP_CMD0_CMD_MMC_APP_CMD 0x37 +#define SSP_CMD0_CMD_MMC_GEN_CMD 0x38 +#define SSP_CMD0_CMD_SD_GO_IDLE_STATE 0x00 +#define SSP_CMD0_CMD_SD_ALL_SEND_CID 0x02 +#define SSP_CMD0_CMD_SD_SEND_RELATIVE_ADDR 0x03 +#define SSP_CMD0_CMD_SD_SET_DSR 0x04 +#define SSP_CMD0_CMD_SD_IO_SEND_OP_COND 0x05 +#define SSP_CMD0_CMD_SD_SELECT_DESELECT_CARD 0x07 +#define SSP_CMD0_CMD_SD_SEND_CSD 0x09 +#define SSP_CMD0_CMD_SD_SEND_CID 0x0a +#define SSP_CMD0_CMD_SD_STOP_TRANSMISSION 0x0c +#define SSP_CMD0_CMD_SD_SEND_STATUS 0x0d +#define SSP_CMD0_CMD_SD_GO_INACTIVE_STATE 0x0f +#define SSP_CMD0_CMD_SD_SET_BLOCKLEN 0x10 +#define SSP_CMD0_CMD_SD_READ_SINGLE_BLOCK 0x11 +#define SSP_CMD0_CMD_SD_READ_MULTIPLE_BLOCK 0x12 +#define SSP_CMD0_CMD_SD_WRITE_BLOCK 0x18 +#define SSP_CMD0_CMD_SD_WRITE_MULTIPLE_BLOCK 0x19 +#define SSP_CMD0_CMD_SD_PROGRAM_CSD 0x1b +#define SSP_CMD0_CMD_SD_SET_WRITE_PROT 0x1c +#define SSP_CMD0_CMD_SD_CLR_WRITE_PROT 0x1d +#define SSP_CMD0_CMD_SD_SEND_WRITE_PROT 0x1e +#define SSP_CMD0_CMD_SD_ERASE_WR_BLK_START 0x20 +#define SSP_CMD0_CMD_SD_ERASE_WR_BLK_END 0x21 +#define SSP_CMD0_CMD_SD_ERASE_GROUP_START 0x23 +#define SSP_CMD0_CMD_SD_ERASE_GROUP_END 0x24 +#define SSP_CMD0_CMD_SD_ERASE 0x26 +#define SSP_CMD0_CMD_SD_LOCK_UNLOCK 0x2a +#define SSP_CMD0_CMD_SD_IO_RW_DIRECT 0x34 +#define SSP_CMD0_CMD_SD_IO_RW_EXTENDED 0x35 +#define SSP_CMD0_CMD_SD_APP_CMD 0x37 +#define SSP_CMD0_CMD_SD_GEN_CMD 0x38 + +#define SSP_CMD1_CMD_ARG_MASK 0xffffffff +#define SSP_CMD1_CMD_ARG_OFFSET 0 + +#define SSP_XFER_SIZE_XFER_COUNT_MASK 0xffffffff +#define SSP_XFER_SIZE_XFER_COUNT_OFFSET 0 + +#define SSP_BLOCK_SIZE_BLOCK_COUNT_MASK (0xffffff << 4) +#define SSP_BLOCK_SIZE_BLOCK_COUNT_OFFSET 4 +#define SSP_BLOCK_SIZE_BLOCK_SIZE_MASK 0xf +#define SSP_BLOCK_SIZE_BLOCK_SIZE_OFFSET 0 + +#define SSP_COMPREF_REFERENCE_MASK 0xffffffff +#define SSP_COMPREF_REFERENCE_OFFSET 0 + +#define SSP_COMPMASK_MASK_MASK 0xffffffff +#define SSP_COMPMASK_MASK_OFFSET 0 + +#define SSP_TIMING_TIMEOUT_MASK (0xffff << 16) +#define SSP_TIMING_TIMEOUT_OFFSET 16 +#define SSP_TIMING_CLOCK_DIVIDE_MASK (0xff << 8) +#define SSP_TIMING_CLOCK_DIVIDE_OFFSET 8 +#define SSP_TIMING_CLOCK_RATE_MASK 0xff +#define SSP_TIMING_CLOCK_RATE_OFFSET 0 + +#define SSP_CTRL1_SDIO_IRQ (1 << 31) +#define SSP_CTRL1_SDIO_IRQ_EN (1 << 30) +#define SSP_CTRL1_RESP_ERR_IRQ (1 << 29) +#define SSP_CTRL1_RESP_ERR_IRQ_EN (1 << 28) +#define SSP_CTRL1_RESP_TIMEOUT_IRQ (1 << 27) +#define SSP_CTRL1_RESP_TIMEOUT_IRQ_EN (1 << 26) +#define SSP_CTRL1_DATA_TIMEOUT_IRQ (1 << 25) +#define SSP_CTRL1_DATA_TIMEOUT_IRQ_EN (1 << 24) +#define SSP_CTRL1_DATA_CRC_IRQ (1 << 23) +#define SSP_CTRL1_DATA_CRC_IRQ_EN (1 << 22) +#define SSP_CTRL1_FIFO_UNDERRUN_IRQ (1 << 21) +#define SSP_CTRL1_FIFO_UNDERRUN_EN (1 << 20) +#define SSP_CTRL1_CEATA_CCS_ERR_IRQ (1 << 19) +#define SSP_CTRL1_CEATA_CCS_ERR_IRQ_EN (1 << 18) +#define SSP_CTRL1_RECV_TIMEOUT_IRQ (1 << 17) +#define SSP_CTRL1_RECV_TIMEOUT_IRQ_EN (1 << 16) +#define SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15) +#define SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14) +#define SSP_CTRL1_DMA_ENABLE (1 << 13) +#define SSP_CTRL1_CEATA_CCS_ERR_EN (1 << 12) +#define SSP_CTRL1_SLAVE_OUT_DISABLE (1 << 11) +#define SSP_CTRL1_PHASE (1 << 10) +#define SSP_CTRL1_POLARITY (1 << 9) +#define SSP_CTRL1_SLAVE_MODE (1 << 8) +#define SSP_CTRL1_WORD_LENGTH_MASK (0xf << 4) +#define SSP_CTRL1_WORD_LENGTH_OFFSET 4 +#define SSP_CTRL1_WORD_LENGTH_RESERVED0 (0x0 << 4) +#define SSP_CTRL1_WORD_LENGTH_RESERVED1 (0x1 << 4) +#define SSP_CTRL1_WORD_LENGTH_RESERVED2 (0x2 << 4) +#define SSP_CTRL1_WORD_LENGTH_FOUR_BITS (0x3 << 4) +#define SSP_CTRL1_WORD_LENGTH_EIGHT_BITS (0x7 << 4) +#define SSP_CTRL1_WORD_LENGTH_SIXTEEN_BITS (0xf << 4) +#define SSP_CTRL1_SSP_MODE_MASK 0xf +#define SSP_CTRL1_SSP_MODE_OFFSET 0 +#define SSP_CTRL1_SSP_MODE_SPI 0x0 +#define SSP_CTRL1_SSP_MODE_SSI 0x1 +#define SSP_CTRL1_SSP_MODE_SD_MMC 0x3 +#define SSP_CTRL1_SSP_MODE_MS 0x4 + +#define SSP_DATA_DATA_MASK 0xffffffff +#define SSP_DATA_DATA_OFFSET 0 + +#define SSP_SDRESP0_RESP0_MASK 0xffffffff +#define SSP_SDRESP0_RESP0_OFFSET 0 + +#define SSP_SDRESP1_RESP1_MASK 0xffffffff +#define SSP_SDRESP1_RESP1_OFFSET 0 + +#define SSP_SDRESP2_RESP2_MASK 0xffffffff +#define SSP_SDRESP2_RESP2_OFFSET 0 + +#define SSP_SDRESP3_RESP3_MASK 0xffffffff +#define SSP_SDRESP3_RESP3_OFFSET 0 + +#define SSP_DDR_CTRL_DMA_BURST_TYPE_MASK (0x3 << 30) +#define SSP_DDR_CTRL_DMA_BURST_TYPE_OFFSET 30 +#define SSP_DDR_CTRL_NIBBLE_POS (1 << 1) +#define SSP_DDR_CTRL_TXCLK_DELAY_TYPE (1 << 0) + +#define SSP_DLL_CTRL_REF_UPDATE_INT_MASK (0xf << 28) +#define SSP_DLL_CTRL_REF_UPDATE_INT_OFFSET 28 +#define SSP_DLL_CTRL_SLV_UPDATE_INT_MASK (0xff << 20) +#define SSP_DLL_CTRL_SLV_UPDATE_INT_OFFSET 20 +#define SSP_DLL_CTRL_SLV_OVERRIDE_VAL_MASK (0x3f << 10) +#define SSP_DLL_CTRL_SLV_OVERRIDE_VAL_OFFSET 10 +#define SSP_DLL_CTRL_SLV_OVERRIDE (1 << 9) +#define SSP_DLL_CTRL_GATE_UPDATE (1 << 7) +#define SSP_DLL_CTRL_SLV_DLY_TARGET_MASK (0xf << 3) +#define SSP_DLL_CTRL_SLV_DLY_TARGET_OFFSET 3 +#define SSP_DLL_CTRL_SLV_FORCE_UPD (1 << 2) +#define SSP_DLL_CTRL_RESET (1 << 1) +#define SSP_DLL_CTRL_ENABLE (1 << 0) + +#define SSP_STATUS_PRESENT (1 << 31) +#define SSP_STATUS_MS_PRESENT (1 << 30) +#define SSP_STATUS_SD_PRESENT (1 << 29) +#define SSP_STATUS_CARD_DETECT (1 << 28) +#define SSP_STATUS_DMABURST (1 << 22) +#define SSP_STATUS_DMASENSE (1 << 21) +#define SSP_STATUS_DMATERM (1 << 20) +#define SSP_STATUS_DMAREQ (1 << 19) +#define SSP_STATUS_DMAEND (1 << 18) +#define SSP_STATUS_SDIO_IRQ (1 << 17) +#define SSP_STATUS_RESP_CRC_ERR (1 << 16) +#define SSP_STATUS_RESP_ERR (1 << 15) +#define SSP_STATUS_RESP_TIMEOUT (1 << 14) +#define SSP_STATUS_DATA_CRC_ERR (1 << 13) +#define SSP_STATUS_TIMEOUT (1 << 12) +#define SSP_STATUS_RECV_TIMEOUT_STAT (1 << 11) +#define SSP_STATUS_CEATA_CCS_ERR (1 << 10) +#define SSP_STATUS_FIFO_OVRFLW (1 << 9) +#define SSP_STATUS_FIFO_FULL (1 << 8) +#define SSP_STATUS_FIFO_EMPTY (1 << 5) +#define SSP_STATUS_FIFO_UNDRFLW (1 << 4) +#define SSP_STATUS_CMD_BUSY (1 << 3) +#define SSP_STATUS_DATA_BUSY (1 << 2) +#define SSP_STATUS_BUSY (1 << 0) + +#define SSP_DLL_STS_REF_SEL_MASK (0x3f << 8) +#define SSP_DLL_STS_REF_SEL_OFFSET 8 +#define SSP_DLL_STS_SLV_SEL_MASK (0x3f << 2) +#define SSP_DLL_STS_SLV_SEL_OFFSET 2 +#define SSP_DLL_STS_REF_LOCK (1 << 1) +#define SSP_DLL_STS_SLV_LOCK (1 << 0) + +#define SSP_DEBUG_DATACRC_ERR_MASK (0xf << 28) +#define SSP_DEBUG_DATACRC_ERR_OFFSET 28 +#define SSP_DEBUG_DATA_STALL (1 << 27) +#define SSP_DEBUG_DAT_SM_MASK (0x7 << 24) +#define SSP_DEBUG_DAT_SM_OFFSET 24 +#define SSP_DEBUG_DAT_SM_DSM_IDLE (0x0 << 24) +#define SSP_DEBUG_DAT_SM_DSM_WORD (0x2 << 24) +#define SSP_DEBUG_DAT_SM_DSM_CRC1 (0x3 << 24) +#define SSP_DEBUG_DAT_SM_DSM_CRC2 (0x4 << 24) +#define SSP_DEBUG_DAT_SM_DSM_END (0x5 << 24) +#define SSP_DEBUG_MSTK_SM_MASK (0xf << 20) +#define SSP_DEBUG_MSTK_SM_OFFSET 20 +#define SSP_DEBUG_MSTK_SM_MSTK_IDLE (0x0 << 20) +#define SSP_DEBUG_MSTK_SM_MSTK_CKON (0x1 << 20) +#define SSP_DEBUG_MSTK_SM_MSTK_BS1 (0x2 << 20) +#define SSP_DEBUG_MSTK_SM_MSTK_TPC (0x3 << 20) +#define SSP_DEBUG_MSTK_SM_MSTK_BS2 (0x4 << 20) +#define SSP_DEBUG_MSTK_SM_MSTK_HDSHK (0x5 << 20) +#define SSP_DEBUG_MSTK_SM_MSTK_BS3 (0x6 << 20) +#define SSP_DEBUG_MSTK_SM_MSTK_RW (0x7 << 20) +#define SSP_DEBUG_MSTK_SM_MSTK_CRC1 (0x8 << 20) +#define SSP_DEBUG_MSTK_SM_MSTK_CRC2 (0x9 << 20) +#define SSP_DEBUG_MSTK_SM_MSTK_BS0 (0xa << 20) +#define SSP_DEBUG_MSTK_SM_MSTK_END1 (0xb << 20) +#define SSP_DEBUG_MSTK_SM_MSTK_END2W (0xc << 20) +#define SSP_DEBUG_MSTK_SM_MSTK_END2R (0xd << 20) +#define SSP_DEBUG_MSTK_SM_MSTK_DONE (0xe << 20) +#define SSP_DEBUG_CMD_OE (1 << 19) +#define SSP_DEBUG_DMA_SM_MASK (0x7 << 16) +#define SSP_DEBUG_DMA_SM_OFFSET 16 +#define SSP_DEBUG_DMA_SM_DMA_IDLE (0x0 << 16) +#define SSP_DEBUG_DMA_SM_DMA_DMAREQ (0x1 << 16) +#define SSP_DEBUG_DMA_SM_DMA_DMAACK (0x2 << 16) +#define SSP_DEBUG_DMA_SM_DMA_STALL (0x3 << 16) +#define SSP_DEBUG_DMA_SM_DMA_BUSY (0x4 << 16) +#define SSP_DEBUG_DMA_SM_DMA_DONE (0x5 << 16) +#define SSP_DEBUG_DMA_SM_DMA_COUNT (0x6 << 16) +#define SSP_DEBUG_MMC_SM_MASK (0xf << 12) +#define SSP_DEBUG_MMC_SM_OFFSET 12 +#define SSP_DEBUG_MMC_SM_MMC_IDLE (0x0 << 12) +#define SSP_DEBUG_MMC_SM_MMC_CMD (0x1 << 12) +#define SSP_DEBUG_MMC_SM_MMC_TRC (0x2 << 12) +#define SSP_DEBUG_MMC_SM_MMC_RESP (0x3 << 12) +#define SSP_DEBUG_MMC_SM_MMC_RPRX (0x4 << 12) +#define SSP_DEBUG_MMC_SM_MMC_TX (0x5 << 12) +#define SSP_DEBUG_MMC_SM_MMC_CTOK (0x6 << 12) +#define SSP_DEBUG_MMC_SM_MMC_RX (0x7 << 12) +#define SSP_DEBUG_MMC_SM_MMC_CCS (0x8 << 12) +#define SSP_DEBUG_MMC_SM_MMC_PUP (0x9 << 12) +#define SSP_DEBUG_MMC_SM_MMC_WAIT (0xa << 12) +#define SSP_DEBUG_CMD_SM_MASK (0x3 << 10) +#define SSP_DEBUG_CMD_SM_OFFSET 10 +#define SSP_DEBUG_CMD_SM_CSM_IDLE (0x0 << 10) +#define SSP_DEBUG_CMD_SM_CSM_INDEX (0x1 << 10) +#define SSP_DEBUG_CMD_SM_CSM_ARG (0x2 << 10) +#define SSP_DEBUG_CMD_SM_CSM_CRC (0x3 << 10) +#define SSP_DEBUG_SSP_CMD (1 << 9) +#define SSP_DEBUG_SSP_RESP (1 << 8) +#define SSP_DEBUG_SSP_RXD_MASK 0xff +#define SSP_DEBUG_SSP_RXD_OFFSET 0 + +#define SSP_VERSION_MAJOR_MASK (0xff << 24) +#define SSP_VERSION_MAJOR_OFFSET 24 +#define SSP_VERSION_MINOR_MASK (0xff << 16) +#define SSP_VERSION_MINOR_OFFSET 16 +#define SSP_VERSION_STEP_MASK 0xffff +#define SSP_VERSION_STEP_OFFSET 0 + +#endif /* __MX28_REGS_SSP_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/regs-timrot.h b/arch/arm/include/asm/arch-mx28/regs-timrot.h new file mode 100644 index 000000000..1b941cf28 --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/regs-timrot.h @@ -0,0 +1,171 @@ +/* + * Freescale i.MX28 TIMROT Register Definitions + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * + * Based on code from LTIB: + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __MX28_REGS_TIMROT_H__ +#define __MX28_REGS_TIMROT_H__ + +#include <asm/arch/regs-common.h> + +#ifndef __ASSEMBLY__ +struct mx28_timrot_regs { + mx28_reg(hw_timrot_rotctrl) + mx28_reg(hw_timrot_rotcount) + mx28_reg(hw_timrot_timctrl0) + mx28_reg(hw_timrot_running_count0) + mx28_reg(hw_timrot_fixed_count0) + mx28_reg(hw_timrot_match_count0) + mx28_reg(hw_timrot_timctrl1) + mx28_reg(hw_timrot_running_count1) + mx28_reg(hw_timrot_fixed_count1) + mx28_reg(hw_timrot_match_count1) + mx28_reg(hw_timrot_timctrl2) + mx28_reg(hw_timrot_running_count2) + mx28_reg(hw_timrot_fixed_count2) + mx28_reg(hw_timrot_match_count2) + mx28_reg(hw_timrot_timctrl3) + mx28_reg(hw_timrot_running_count3) + mx28_reg(hw_timrot_fixed_count3) + mx28_reg(hw_timrot_match_count3) + mx28_reg(hw_timrot_version) +}; +#endif + +#define TIMROT_ROTCTRL_SFTRST (1 << 31) +#define TIMROT_ROTCTRL_CLKGATE (1 << 30) +#define TIMROT_ROTCTRL_ROTARY_PRESENT (1 << 29) +#define TIMROT_ROTCTRL_TIM3_PRESENT (1 << 28) +#define TIMROT_ROTCTRL_TIM2_PRESENT (1 << 27) +#define TIMROT_ROTCTRL_TIM1_PRESENT (1 << 26) +#define TIMROT_ROTCTRL_TIM0_PRESENT (1 << 25) +#define TIMROT_ROTCTRL_STATE_MASK (0x7 << 22) +#define TIMROT_ROTCTRL_STATE_OFFSET 22 +#define TIMROT_ROTCTRL_DIVIDER_MASK (0x3f << 16) +#define TIMROT_ROTCTRL_DIVIDER_OFFSET 16 +#define TIMROT_ROTCTRL_RELATIVE (1 << 12) +#define TIMROT_ROTCTRL_OVERSAMPLE_MASK (0x3 << 10) +#define TIMROT_ROTCTRL_OVERSAMPLE_OFFSET 10 +#define TIMROT_ROTCTRL_OVERSAMPLE_8X (0x0 << 10) +#define TIMROT_ROTCTRL_OVERSAMPLE_4X (0x1 << 10) +#define TIMROT_ROTCTRL_OVERSAMPLE_2X (0x2 << 10) +#define TIMROT_ROTCTRL_OVERSAMPLE_1X (0x3 << 10) +#define TIMROT_ROTCTRL_POLARITY_B (1 << 9) +#define TIMROT_ROTCTRL_POLARITY_A (1 << 8) +#define TIMROT_ROTCTRL_SELECT_B_MASK (0xf << 4) +#define TIMROT_ROTCTRL_SELECT_B_OFFSET 4 +#define TIMROT_ROTCTRL_SELECT_B_NEVER_TICK (0x0 << 4) +#define TIMROT_ROTCTRL_SELECT_B_PWM0 (0x1 << 4) +#define TIMROT_ROTCTRL_SELECT_B_PWM1 (0x2 << 4) +#define TIMROT_ROTCTRL_SELECT_B_PWM2 (0x3 << 4) +#define TIMROT_ROTCTRL_SELECT_B_PWM3 (0x4 << 4) +#define TIMROT_ROTCTRL_SELECT_B_PWM4 (0x5 << 4) +#define TIMROT_ROTCTRL_SELECT_B_PWM5 (0x6 << 4) +#define TIMROT_ROTCTRL_SELECT_B_PWM6 (0x7 << 4) +#define TIMROT_ROTCTRL_SELECT_B_PWM7 (0x8 << 4) +#define TIMROT_ROTCTRL_SELECT_B_ROTARYA (0x9 << 4) +#define TIMROT_ROTCTRL_SELECT_B_ROTARYB (0xa << 4) +#define TIMROT_ROTCTRL_SELECT_A_MASK 0xf +#define TIMROT_ROTCTRL_SELECT_A_OFFSET 0 +#define TIMROT_ROTCTRL_SELECT_A_NEVER_TICK 0x0 +#define TIMROT_ROTCTRL_SELECT_A_PWM0 0x1 +#define TIMROT_ROTCTRL_SELECT_A_PWM1 0x2 +#define TIMROT_ROTCTRL_SELECT_A_PWM2 0x3 +#define TIMROT_ROTCTRL_SELECT_A_PWM3 0x4 +#define TIMROT_ROTCTRL_SELECT_A_PWM4 0x5 +#define TIMROT_ROTCTRL_SELECT_A_PWM5 0x6 +#define TIMROT_ROTCTRL_SELECT_A_PWM6 0x7 +#define TIMROT_ROTCTRL_SELECT_A_PWM7 0x8 +#define TIMROT_ROTCTRL_SELECT_A_ROTARYA 0x9 +#define TIMROT_ROTCTRL_SELECT_A_ROTARYB 0xa + +#define TIMROT_ROTCOUNT_UPDOWN_MASK 0xffff +#define TIMROT_ROTCOUNT_UPDOWN_OFFSET 0 + +#define TIMROT_TIMCTRLn_IRQ (1 << 15) +#define TIMROT_TIMCTRLn_IRQ_EN (1 << 14) +#define TIMROT_TIMCTRLn_MATCH_MODE (1 << 11) +#define TIMROT_TIMCTRLn_POLARITY (1 << 8) +#define TIMROT_TIMCTRLn_UPDATE (1 << 7) +#define TIMROT_TIMCTRLn_RELOAD (1 << 6) +#define TIMROT_TIMCTRLn_PRESCALE_MASK (0x3 << 4) +#define TIMROT_TIMCTRLn_PRESCALE_OFFSET 4 +#define TIMROT_TIMCTRLn_PRESCALE_DIV_BY_1 (0x0 << 4) +#define TIMROT_TIMCTRLn_PRESCALE_DIV_BY_2 (0x1 << 4) +#define TIMROT_TIMCTRLn_PRESCALE_DIV_BY_4 (0x2 << 4) +#define TIMROT_TIMCTRLn_PRESCALE_DIV_BY_8 (0x3 << 4) +#define TIMROT_TIMCTRLn_SELECT_MASK 0xf +#define TIMROT_TIMCTRLn_SELECT_OFFSET 0 +#define TIMROT_TIMCTRLn_SELECT_NEVER_TICK 0x0 +#define TIMROT_TIMCTRLn_SELECT_PWM0 0x1 +#define TIMROT_TIMCTRLn_SELECT_PWM1 0x2 +#define TIMROT_TIMCTRLn_SELECT_PWM2 0x3 +#define TIMROT_TIMCTRLn_SELECT_PWM3 0x4 +#define TIMROT_TIMCTRLn_SELECT_PWM4 0x5 +#define TIMROT_TIMCTRLn_SELECT_PWM5 0x6 +#define TIMROT_TIMCTRLn_SELECT_PWM6 0x7 +#define TIMROT_TIMCTRLn_SELECT_PWM7 0x8 +#define TIMROT_TIMCTRLn_SELECT_ROTARYA 0x9 +#define TIMROT_TIMCTRLn_SELECT_ROTARYB 0xa +#define TIMROT_TIMCTRLn_SELECT_32KHZ_XTAL 0xb +#define TIMROT_TIMCTRLn_SELECT_8KHZ_XTAL 0xc +#define TIMROT_TIMCTRLn_SELECT_4KHZ_XTAL 0xd +#define TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL 0xe +#define TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS 0xf + +#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK 0xffffffff +#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET 0 + +#define TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK 0xffffffff +#define TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET 0 + +#define TIMROT_MATCH_COUNTn_MATCH_COUNT_MASK 0xffffffff +#define TIMROT_MATCH_COUNTn_MATCH_COUNT_OFFSET 0 + +#define TIMROT_TIMCTRL3_TEST_SIGNAL_MASK (0xf << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_OFFSET 16 +#define TIMROT_TIMCTRL3_TEST_SIGNAL_NEVER_TICK (0x0 << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM0 (0x1 << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM1 (0x2 << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM2 (0x3 << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM3 (0x4 << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM4 (0x5 << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM5 (0x6 << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM6 (0x7 << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM7 (0x8 << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYA (0x9 << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYB (0xa << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_32KHZ_XTAL (0xb << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_8KHZ_XTAL (0xc << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_4KHZ_XTAL (0xd << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL (0xe << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS (0xf << 16) +#define TIMROT_TIMCTRL3_DUTY_CYCLE (1 << 9) + +#define TIMROT_VERSION_MAJOR_MASK (0xff << 24) +#define TIMROT_VERSION_MAJOR_OFFSET 24 +#define TIMROT_VERSION_MINOR_MASK (0xff << 16) +#define TIMROT_VERSION_MINOR_OFFSET 16 +#define TIMROT_VERSION_STEP_MASK 0xffff +#define TIMROT_VERSION_STEP_OFFSET 0 + +#endif /* __MX28_REGS_TIMROT_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/regs-usb.h b/arch/arm/include/asm/arch-mx28/regs-usb.h new file mode 100644 index 000000000..ea61de80d --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/regs-usb.h @@ -0,0 +1,178 @@ +/* + * Freescale i.MX28 USB OTG Register Definitions + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __REGS_USB_H__ +#define __REGS_USB_H__ + +struct mx28_usb_regs { + uint32_t hw_usbctrl_id; /* 0x000 */ + uint32_t hw_usbctrl_hwgeneral; /* 0x004 */ + uint32_t hw_usbctrl_hwhost; /* 0x008 */ + uint32_t hw_usbctrl_hwdevice; /* 0x00c */ + uint32_t hw_usbctrl_hwtxbuf; /* 0x010 */ + uint32_t hw_usbctrl_hwrxbuf; /* 0x014 */ + + uint32_t reserved1[26]; + + uint32_t hw_usbctrl_gptimer0ld; /* 0x080 */ + uint32_t hw_usbctrl_gptimer0ctrl; /* 0x084 */ + uint32_t hw_usbctrl_gptimer1ld; /* 0x088 */ + uint32_t hw_usbctrl_gptimer1ctrl; /* 0x08c */ + uint32_t hw_usbctrl_sbuscfg; /* 0x090 */ + + uint32_t reserved2[27]; + + uint32_t hw_usbctrl_caplength; /* 0x100 */ + uint32_t hw_usbctrl_hcsparams; /* 0x104 */ + uint32_t hw_usbctrl_hccparams; /* 0x108 */ + + uint32_t reserved3[5]; + + uint32_t hw_usbctrl_dciversion; /* 0x120 */ + uint32_t hw_usbctrl_dccparams; /* 0x124 */ + + uint32_t reserved4[6]; + + uint32_t hw_usbctrl_usbcmd; /* 0x140 */ + uint32_t hw_usbctrl_usbsts; /* 0x144 */ + uint32_t hw_usbctrl_usbintr; /* 0x148 */ + uint32_t hw_usbctrl_frindex; /* 0x14c */ + + uint32_t reserved5; + + union { + uint32_t hw_usbctrl_periodiclistbase; /* 0x154 */ + uint32_t hw_usbctrl_deviceaddr; /* 0x154 */ + }; + union { + uint32_t hw_usbctrl_asynclistaddr; /* 0x158 */ + uint32_t hw_usbctrl_endpointlistaddr; /* 0x158 */ + }; + + uint32_t hw_usbctrl_ttctrl; /* 0x15c */ + uint32_t hw_usbctrl_burstsize; /* 0x160 */ + uint32_t hw_usbctrl_txfilltuning; /* 0x164 */ + + uint32_t reserved6; + + uint32_t hw_usbctrl_ic_usb; /* 0x16c */ + uint32_t hw_usbctrl_ulpi; /* 0x170 */ + + uint32_t reserved7; + + uint32_t hw_usbctrl_endptnak; /* 0x178 */ + uint32_t hw_usbctrl_endptnaken; /* 0x17c */ + + uint32_t reserved8; + + uint32_t hw_usbctrl_portsc1; /* 0x184 */ + + uint32_t reserved9[7]; + + uint32_t hw_usbctrl_otgsc; /* 0x1a4 */ + uint32_t hw_usbctrl_usbmode; /* 0x1a8 */ + uint32_t hw_usbctrl_endptsetupstat; /* 0x1ac */ + uint32_t hw_usbctrl_endptprime; /* 0x1b0 */ + uint32_t hw_usbctrl_endptflush; /* 0x1b4 */ + uint32_t hw_usbctrl_endptstat; /* 0x1b8 */ + uint32_t hw_usbctrl_endptcomplete; /* 0x1bc */ + uint32_t hw_usbctrl_endptctrl0; /* 0x1c0 */ + uint32_t hw_usbctrl_endptctrl1; /* 0x1c4 */ + uint32_t hw_usbctrl_endptctrl2; /* 0x1c8 */ + uint32_t hw_usbctrl_endptctrl3; /* 0x1cc */ + uint32_t hw_usbctrl_endptctrl4; /* 0x1d0 */ + uint32_t hw_usbctrl_endptctrl5; /* 0x1d4 */ + uint32_t hw_usbctrl_endptctrl6; /* 0x1d8 */ + uint32_t hw_usbctrl_endptctrl7; /* 0x1dc */ +}; + +#define CLKCTRL_PLL0CTRL0_LFR_SEL_MASK (0x3 << 28) + +#define HW_USBCTRL_ID_CIVERSION_OFFSET 29 +#define HW_USBCTRL_ID_CIVERSION_MASK (0x7 << 29) +#define HW_USBCTRL_ID_VERSION_OFFSET 25 +#define HW_USBCTRL_ID_VERSION_MASK (0xf << 25) +#define HW_USBCTRL_ID_REVISION_OFFSET 21 +#define HW_USBCTRL_ID_REVISION_MASK (0xf << 21) +#define HW_USBCTRL_ID_TAG_OFFSET 16 +#define HW_USBCTRL_ID_TAG_MASK (0x1f << 16) +#define HW_USBCTRL_ID_NID_OFFSET 8 +#define HW_USBCTRL_ID_NID_MASK (0x3f << 8) +#define HW_USBCTRL_ID_ID_OFFSET 0 +#define HW_USBCTRL_ID_ID_MASK (0x3f << 0) + +#define HW_USBCTRL_HWGENERAL_SM_OFFSET 9 +#define HW_USBCTRL_HWGENERAL_SM_MASK (0x3 << 9) +#define HW_USBCTRL_HWGENERAL_PHYM_OFFSET 6 +#define HW_USBCTRL_HWGENERAL_PHYM_MASK (0x7 << 6) +#define HW_USBCTRL_HWGENERAL_PHYW_OFFSET 4 +#define HW_USBCTRL_HWGENERAL_PHYW_MASK (0x3 << 4) +#define HW_USBCTRL_HWGENERAL_BWT (1 << 3) +#define HW_USBCTRL_HWGENERAL_CLKC_OFFSET 1 +#define HW_USBCTRL_HWGENERAL_CLKC_MASK (0x3 << 1) +#define HW_USBCTRL_HWGENERAL_RT (1 << 0) + +#define HW_USBCTRL_HWHOST_TTPER_OFFSET 24 +#define HW_USBCTRL_HWHOST_TTPER_MASK (0xff << 24) +#define HW_USBCTRL_HWHOST_TTASY_OFFSET 16 +#define HW_USBCTRL_HWHOST_TTASY_MASK (0xff << 19) +#define HW_USBCTRL_HWHOST_NPORT_OFFSET 1 +#define HW_USBCTRL_HWHOST_NPORT_MASK (0x7 << 1) +#define HW_USBCTRL_HWHOST_HC (1 << 0) + +#define HW_USBCTRL_HWDEVICE_DEVEP_OFFSET 1 +#define HW_USBCTRL_HWDEVICE_DEVEP_MASK (0x1f << 1) +#define HW_USBCTRL_HWDEVICE_DC (1 << 0) + +#define HW_USBCTRL_HWTXBUF_TXLCR (1 << 31) +#define HW_USBCTRL_HWTXBUF_TXCHANADD_OFFSET 16 +#define HW_USBCTRL_HWTXBUF_TXCHANADD_MASK (0xff << 16) +#define HW_USBCTRL_HWTXBUF_TXADD_OFFSET 8 +#define HW_USBCTRL_HWTXBUF_TXADD_MASK (0xff << 8) +#define HW_USBCTRL_HWTXBUF_TXBURST_OFFSET 0 +#define HW_USBCTRL_HWTXBUF_TXBURST_MASK 0xff + +#define HW_USBCTRL_HWRXBUF_RXADD_OFFSET 8 +#define HW_USBCTRL_HWRXBUF_RXADD_MASK (0xff << 8) +#define HW_USBCTRL_HWRXBUF_RXBURST_OFFSET 0 +#define HW_USBCTRL_HWRXBUF_RXBURST_MASK 0xff + +#define HW_USBCTRL_GPTIMERLD_GPTLD_OFFSET 0 +#define HW_USBCTRL_GPTIMERLD_GPTLD_MASK 0xffffff + +#define HW_USBCTRL_GPTIMERCTRL_GPTRUN (1 << 31) +#define HW_USBCTRL_GPTIMERCTRL_GPTRST (1 << 30) +#define HW_USBCTRL_GPTIMERCTRL_GPTMODE (1 << 24) +#define HW_USBCTRL_GPTIMERCTRL_GPTCNT_OFFSET 0 +#define HW_USBCTRL_GPTIMERCTRL_GPTCNT_MASK 0xffffff + +#define HW_USBCTRL_SBUSCFG_AHBBURST_OFFSET 0 +#define HW_USBCTRL_SBUSCFG_AHBBURST_MASK 0x7 +#define HW_USBCTRL_SBUSCFG_AHBBURST_U_INCR 0x0 +#define HW_USBCTRL_SBUSCFG_AHBBURST_S_INCR4 0x1 +#define HW_USBCTRL_SBUSCFG_AHBBURST_S_INCR8 0x2 +#define HW_USBCTRL_SBUSCFG_AHBBURST_S_INCR16 0x3 +#define HW_USBCTRL_SBUSCFG_AHBBURST_U_INCR4 0x5 +#define HW_USBCTRL_SBUSCFG_AHBBURST_U_INCR8 0x6 +#define HW_USBCTRL_SBUSCFG_AHBBURST_U_INCR16 0x7 + +#endif /* __REGS_USB_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/regs-usbphy.h b/arch/arm/include/asm/arch-mx28/regs-usbphy.h new file mode 100644 index 000000000..e823e1997 --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/regs-usbphy.h @@ -0,0 +1,151 @@ +/* + * Freescale i.MX28 USB PHY Register Definitions + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __REGS_USBPHY_H__ +#define __REGS_USBPHY_H__ + +struct mx28_usbphy_regs { + mx28_reg(hw_usbphy_pwd) + mx28_reg(hw_usbphy_tx) + mx28_reg(hw_usbphy_rx) + mx28_reg(hw_usbphy_ctrl) + mx28_reg(hw_usbphy_status) + mx28_reg(hw_usbphy_debug) + mx28_reg(hw_usbphy_debug0_status) + mx28_reg(hw_usbphy_debug1) + mx28_reg(hw_usbphy_version) + mx28_reg(hw_usbphy_ip) +}; + +#define USBPHY_PWD_RXPWDRX (1 << 20) +#define USBPHY_PWD_RXPWDDIFF (1 << 19) +#define USBPHY_PWD_RXPWD1PT1 (1 << 18) +#define USBPHY_PWD_RXPWDENV (1 << 17) +#define USBPHY_PWD_TXPWDV2I (1 << 12) +#define USBPHY_PWD_TXPWDIBIAS (1 << 11) +#define USBPHY_PWD_TXPWDFS (1 << 10) + +#define USBPHY_TX_USBPHY_TX_EDGECTRL_OFFSET 26 +#define USBPHY_TX_USBPHY_TX_EDGECTRL_MASK (0x7 << 26) +#define USBPHY_TX_USBPHY_TX_SYNC_INVERT (1 << 25) +#define USBPHY_TX_USBPHY_TX_SYNC_MUX (1 << 24) +#define USBPHY_TX_TXENCAL45DP (1 << 21) +#define USBPHY_TX_TXCAL45DP_OFFSET 16 +#define USBPHY_TX_TXCAL45DP_MASK (0xf << 16) +#define USBPHY_TX_TXENCAL45DM (1 << 13) +#define USBPHY_TX_TXCAL45DM_OFFSET 8 +#define USBPHY_TX_TXCAL45DM_MASK (0xf << 8) +#define USBPHY_TX_D_CAL_OFFSET 0 +#define USBPHY_TX_D_CAL_MASK 0xf + +#define USBPHY_RX_RXDBYPASS (1 << 22) +#define USBPHY_RX_DISCONADJ_OFFSET 4 +#define USBPHY_RX_DISCONADJ_MASK (0x7 << 4) +#define USBPHY_RX_ENVADJ_OFFSET 0 +#define USBPHY_RX_ENVADJ_MASK 0x7 + +#define USBPHY_CTRL_SFTRST (1 << 31) +#define USBPHY_CTRL_CLKGATE (1 << 30) +#define USBPHY_CTRL_UTMI_SUSPENDM (1 << 29) +#define USBPHY_CTRL_HOST_FORCE_LS_SE0 (1 << 28) +#define USBPHY_CTRL_ENAUTOSET_USBCLKS (1 << 26) +#define USBPHY_CTRL_ENAUTOCLR_USBCLKGATE (1 << 25) +#define USBPHY_CTRL_FSDLL_RST_EN (1 << 24) +#define USBPHY_CTRL_ENVBUSCHG_WKUP (1 << 23) +#define USBPHY_CTRL_ENIDCHG_WKUP (1 << 22) +#define USBPHY_CTRL_ENDPDMCHG_WKUP (1 << 21) +#define USBPHY_CTRL_ENAUTOCLR_PHY_PWD (1 << 20) +#define USBPHY_CTRL_ENAUTOCLR_CLKGATE (1 << 19) +#define USBPHY_CTRL_ENAUTO_PWRON_PLL (1 << 18) +#define USBPHY_CTRL_WAKEUP_IRQ (1 << 17) +#define USBPHY_CTRL_ENIRQWAKEUP (1 << 16) +#define USBPHY_CTRL_ENUTMILEVEL3 (1 << 15) +#define USBPHY_CTRL_ENUTMILEVEL2 (1 << 14) +#define USBPHY_CTRL_DATA_ON_LRADC (1 << 13) +#define USBPHY_CTRL_DEVPLUGIN_IRQ (1 << 12) +#define USBPHY_CTRL_ENIRQDEVPLUGIN (1 << 11) +#define USBPHY_CTRL_RESUME_IRQ (1 << 10) +#define USBPHY_CTRL_ENIRQRESUMEDETECT (1 << 9) +#define USBPHY_CTRL_RESUMEIRQSTICKY (1 << 8) +#define USBPHY_CTRL_ENOTGIDDETECT (1 << 7) +#define USBPHY_CTRL_DEVPLUGIN_POLARITY (1 << 5) +#define USBPHY_CTRL_ENDEVPLUGINDETECT (1 << 4) +#define USBPHY_CTRL_HOSTDISCONDETECT_IRQ (1 << 3) +#define USBPHY_CTRL_ENIRQHOSTDISCON (1 << 2) +#define USBPHY_CTRL_ENHOSTDISCONDETECT (1 << 1) + +#define USBPHY_STATUS_RESUME_STATUS (1 << 10) +#define USBPHY_STATUS_OTGID_STATUS (1 << 8) +#define USBPHY_STATUS_DEVPLUGIN_STATUS (1 << 6) +#define USBPHY_STATUS_HOSTDISCONDETECT_STATUS (1 << 3) + +#define USBPHY_DEBUG_CLKGATE (1 << 30) +#define USBPHY_DEBUG_HOST_RESUME_DEBUG (1 << 29) +#define USBPHY_DEBUG_SQUELCHRESETLENGTH_OFFSET 25 +#define USBPHY_DEBUG_SQUELCHRESETLENGTH_MASK (0xf << 25) +#define USBPHY_DEBUG_ENSQUELCHRESET (1 << 24) +#define USBPHY_DEBUG_SQUELCHRESETCOUNT_OFFSET 16 +#define USBPHY_DEBUG_SQUELCHRESETCOUNT_MASK (0x1f << 16) +#define USBPHY_DEBUG_ENTX2RXCOUNT (1 << 12) +#define USBPHY_DEBUG_TX2RXCOUNT_OFFSET 8 +#define USBPHY_DEBUG_TX2RXCOUNT_MASK (0xf << 8) +#define USBPHY_DEBUG_ENHSTPULLDOWN_OFFSET 4 +#define USBPHY_DEBUG_ENHSTPULLDOWN_MASK (0x3 << 4) +#define USBPHY_DEBUG_HSTPULLDOWN_OFFSET 2 +#define USBPHY_DEBUG_HSTPULLDOWN_MASK (0x3 << 2) +#define USBPHY_DEBUG_DEBUG_INTERFACE_HOLD (1 << 1) +#define USBPHY_DEBUG_OTGIDPIDLOCK (1 << 0) + +#define USBPHY_DEBUG0_STATUS_SQUELCH_COUNT_OFFSET 26 +#define USBPHY_DEBUG0_STATUS_SQUELCH_COUNT_MASK (0x3f << 26) +#define USBPHY_DEBUG0_STATUS_UTMI_RXERROR_OFFSET 16 +#define USBPHY_DEBUG0_STATUS_UTMI_RXERROR_MASK (0x3ff << 16) +#define USBPHY_DEBUG0_STATUS_LOOP_BACK_OFFSET 0 +#define USBPHY_DEBUG0_STATUS_LOOP_BACK_MASK 0xffff + +#define USBPHY_DEBUG1_ENTAILADJVD_OFFSET 13 +#define USBPHY_DEBUG1_ENTAILADJVD_MASK (0x3 << 13) +#define USBPHY_DEBUG1_ENTX2TX (1 << 12) +#define USBPHY_DEBUG1_DBG_ADDRESS_OFFSET 0 +#define USBPHY_DEBUG1_DBG_ADDRESS_MASK 0xf + +#define USBPHY_VERSION_MAJOR_MASK (0xff << 24) +#define USBPHY_VERSION_MAJOR_OFFSET 24 +#define USBPHY_VERSION_MINOR_MASK (0xff << 16) +#define USBPHY_VERSION_MINOR_OFFSET 16 +#define USBPHY_VERSION_STEP_MASK 0xffff +#define USBPHY_VERSION_STEP_OFFSET 0 + +#define USBPHY_IP_DIV_SEL_OFFSET 23 +#define USBPHY_IP_DIV_SEL_MASK (0x3 << 23) +#define USBPHY_IP_LFR_SEL_OFFSET 21 +#define USBPHY_IP_LFR_SEL_MASK (0x3 << 21) +#define USBPHY_IP_CP_SEL_OFFSET 19 +#define USBPHY_IP_CP_SEL_MASK (0x3 << 19) +#define USBPHY_IP_TSTI_TX_DP (1 << 18) +#define USBPHY_IP_TSTI_TX_DM (1 << 17) +#define USBPHY_IP_ANALOG_TESTMODE (1 << 16) +#define USBPHY_IP_EN_USB_CLKS (1 << 2) +#define USBPHY_IP_PLL_LOCKED (1 << 1) +#define USBPHY_IP_PLL_POWER (1 << 0) + +#endif /* __REGS_USBPHY_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/sys_proto.h b/arch/arm/include/asm/arch-mx28/sys_proto.h new file mode 100644 index 000000000..a226ea484 --- /dev/null +++ b/arch/arm/include/asm/arch-mx28/sys_proto.h @@ -0,0 +1,32 @@ +/* + * Freescale i.MX28 MX28 specific functions + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __MX28_H__ +#define __MX28_H__ + +int mx28_reset_block(struct mx28_register *reg); +int mx28_wait_mask_set(struct mx28_register *reg, uint32_t mask, int timeout); +int mx28_wait_mask_clr(struct mx28_register *reg, uint32_t mask, int timeout); + +int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int)); + +#endif /* __MX28_H__ */ diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h index afdaa1ce6..0147920e4 100644 --- a/arch/arm/include/asm/arch-mx31/imx-regs.h +++ b/arch/arm/include/asm/arch-mx31/imx-regs.h @@ -98,6 +98,12 @@ struct iim_regs { u32 iim_scs3; }; +struct iomuxc_regs { + u32 unused1; + u32 unused2; + u32 gpr; +}; + struct mx3_cpu_type { u8 srev; u32 v; @@ -636,7 +642,6 @@ struct esdc_regs { #define WEIM_BASE 0xb8002000 #define IOMUXC_BASE 0x43FAC000 -#define IOMUXC_GPR (IOMUXC_BASE + 0x8) #define IOMUXC_SW_MUX_CTL(x) (IOMUXC_BASE + 0xc + (x) * 4) #define IOMUXC_SW_PAD_CTL(x) (IOMUXC_BASE + 0x154 + (x) * 4) diff --git a/arch/arm/include/asm/arch-omap3/mmc_host_def.h b/arch/arm/include/asm/arch-omap3/mmc_host_def.h index ba1c2ffc0..296367948 100644 --- a/arch/arm/include/asm/arch-omap3/mmc_host_def.h +++ b/arch/arm/include/asm/arch-omap3/mmc_host_def.h @@ -55,7 +55,7 @@ typedef struct t2 { #define OMAP_HSMMC2_BASE 0x480B4000 #define OMAP_HSMMC3_BASE 0x480AD000 -typedef struct hsmmc { +struct hsmmc { unsigned char res1[0x10]; unsigned int sysconfig; /* 0x10 */ unsigned int sysstatus; /* 0x14 */ @@ -77,7 +77,7 @@ typedef struct hsmmc { unsigned int ie; /* 0x134 */ unsigned char res4[0x8]; unsigned int capa; /* 0x140 */ -} hsmmc_t; +}; /* * OMAP HS MMC Bit definitions @@ -182,13 +182,6 @@ typedef struct hsmmc { #define CLK_400KHZ 1 #define CLK_MISC 2 -typedef struct { - unsigned int card_type; - unsigned int version; - unsigned int mode; - unsigned int size; - unsigned int RCA; -} mmc_card_data; #define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) #define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h index 45c947d64..c2a9b46cf 100644 --- a/arch/arm/include/asm/arch-omap4/clocks.h +++ b/arch/arm/include/asm/arch-omap4/clocks.h @@ -687,4 +687,27 @@ struct dpll_params { s8 m7; }; +extern struct omap4_prcm_regs *const prcm; +extern const u32 sys_clk_array[8]; + +void scale_vcores(void); +void do_scale_tps62361(u32 reg, u32 volt_mv); +u32 omap_ddr_clk(void); +void do_scale_vcore(u32 vcore_reg, u32 volt_mv); +void setup_sri2c(void); +void setup_post_dividers(u32 *const base, const struct dpll_params *params); +u32 get_sys_clk_index(void); +void enable_basic_clocks(void); +void enable_basic_uboot_clocks(void); +void enable_non_essential_clocks(void); +void do_enable_clocks(u32 *const *clk_domains, + u32 *const *clk_modules_hw_auto, + u32 *const *clk_modules_explicit_en, + u8 wait_for_enable); +const struct dpll_params *get_mpu_dpll_params(void); +const struct dpll_params *get_core_dpll_params(void); +const struct dpll_params *get_per_dpll_params(void); +const struct dpll_params *get_iva_dpll_params(void); +const struct dpll_params *get_usb_dpll_params(void); +const struct dpll_params *get_abe_dpll_params(void); #endif /* _CLOCKS_OMAP4_H_ */ diff --git a/arch/arm/include/asm/arch-omap4/emif.h b/arch/arm/include/asm/arch-omap4/emif.h deleted file mode 100644 index 3a549bad5..000000000 --- a/arch/arm/include/asm/arch-omap4/emif.h +++ /dev/null @@ -1,1021 +0,0 @@ -/* - * OMAP44xx EMIF header - * - * Copyright (C) 2009-2010 Texas Instruments, Inc. - * - * Aneesh V <aneesh@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _EMIF_H_ -#define _EMIF_H_ -#include <asm/types.h> -#include <common.h> - -/* Base address */ -#define OMAP44XX_EMIF1 0x4c000000 -#define OMAP44XX_EMIF2 0x4d000000 - -/* Registers shifts and masks */ - -/* EMIF_MOD_ID_REV */ -#define OMAP44XX_REG_SCHEME_SHIFT 30 -#define OMAP44XX_REG_SCHEME_MASK (0x3 << 30) -#define OMAP44XX_REG_MODULE_ID_SHIFT 16 -#define OMAP44XX_REG_MODULE_ID_MASK (0xfff << 16) -#define OMAP44XX_REG_RTL_VERSION_SHIFT 11 -#define OMAP44XX_REG_RTL_VERSION_MASK (0x1f << 11) -#define OMAP44XX_REG_MAJOR_REVISION_SHIFT 8 -#define OMAP44XX_REG_MAJOR_REVISION_MASK (0x7 << 8) -#define OMAP44XX_REG_MINOR_REVISION_SHIFT 0 -#define OMAP44XX_REG_MINOR_REVISION_MASK (0x3f << 0) - -/* STATUS */ -#define OMAP44XX_REG_BE_SHIFT 31 -#define OMAP44XX_REG_BE_MASK (1 << 31) -#define OMAP44XX_REG_DUAL_CLK_MODE_SHIFT 30 -#define OMAP44XX_REG_DUAL_CLK_MODE_MASK (1 << 30) -#define OMAP44XX_REG_FAST_INIT_SHIFT 29 -#define OMAP44XX_REG_FAST_INIT_MASK (1 << 29) -#define OMAP44XX_REG_PHY_DLL_READY_SHIFT 2 -#define OMAP44XX_REG_PHY_DLL_READY_MASK (1 << 2) - -/* SDRAM_CONFIG */ -#define OMAP44XX_REG_SDRAM_TYPE_SHIFT 29 -#define OMAP44XX_REG_SDRAM_TYPE_MASK (0x7 << 29) -#define OMAP44XX_REG_IBANK_POS_SHIFT 27 -#define OMAP44XX_REG_IBANK_POS_MASK (0x3 << 27) -#define OMAP44XX_REG_DDR_TERM_SHIFT 24 -#define OMAP44XX_REG_DDR_TERM_MASK (0x7 << 24) -#define OMAP44XX_REG_DDR2_DDQS_SHIFT 23 -#define OMAP44XX_REG_DDR2_DDQS_MASK (1 << 23) -#define OMAP44XX_REG_DYN_ODT_SHIFT 21 -#define OMAP44XX_REG_DYN_ODT_MASK (0x3 << 21) -#define OMAP44XX_REG_DDR_DISABLE_DLL_SHIFT 20 -#define OMAP44XX_REG_DDR_DISABLE_DLL_MASK (1 << 20) -#define OMAP44XX_REG_SDRAM_DRIVE_SHIFT 18 -#define OMAP44XX_REG_SDRAM_DRIVE_MASK (0x3 << 18) -#define OMAP44XX_REG_CWL_SHIFT 16 -#define OMAP44XX_REG_CWL_MASK (0x3 << 16) -#define OMAP44XX_REG_NARROW_MODE_SHIFT 14 -#define OMAP44XX_REG_NARROW_MODE_MASK (0x3 << 14) -#define OMAP44XX_REG_CL_SHIFT 10 -#define OMAP44XX_REG_CL_MASK (0xf << 10) -#define OMAP44XX_REG_ROWSIZE_SHIFT 7 -#define OMAP44XX_REG_ROWSIZE_MASK (0x7 << 7) -#define OMAP44XX_REG_IBANK_SHIFT 4 -#define OMAP44XX_REG_IBANK_MASK (0x7 << 4) -#define OMAP44XX_REG_EBANK_SHIFT 3 -#define OMAP44XX_REG_EBANK_MASK (1 << 3) -#define OMAP44XX_REG_PAGESIZE_SHIFT 0 -#define OMAP44XX_REG_PAGESIZE_MASK (0x7 << 0) - -/* SDRAM_CONFIG_2 */ -#define OMAP44XX_REG_CS1NVMEN_SHIFT 30 -#define OMAP44XX_REG_CS1NVMEN_MASK (1 << 30) -#define OMAP44XX_REG_EBANK_POS_SHIFT 27 -#define OMAP44XX_REG_EBANK_POS_MASK (1 << 27) -#define OMAP44XX_REG_RDBNUM_SHIFT 4 -#define OMAP44XX_REG_RDBNUM_MASK (0x3 << 4) -#define OMAP44XX_REG_RDBSIZE_SHIFT 0 -#define OMAP44XX_REG_RDBSIZE_MASK (0x7 << 0) - -/* SDRAM_REF_CTRL */ -#define OMAP44XX_REG_INITREF_DIS_SHIFT 31 -#define OMAP44XX_REG_INITREF_DIS_MASK (1 << 31) -#define OMAP44XX_REG_SRT_SHIFT 29 -#define OMAP44XX_REG_SRT_MASK (1 << 29) -#define OMAP44XX_REG_ASR_SHIFT 28 -#define OMAP44XX_REG_ASR_MASK (1 << 28) -#define OMAP44XX_REG_PASR_SHIFT 24 -#define OMAP44XX_REG_PASR_MASK (0x7 << 24) -#define OMAP44XX_REG_REFRESH_RATE_SHIFT 0 -#define OMAP44XX_REG_REFRESH_RATE_MASK (0xffff << 0) - -/* SDRAM_REF_CTRL_SHDW */ -#define OMAP44XX_REG_REFRESH_RATE_SHDW_SHIFT 0 -#define OMAP44XX_REG_REFRESH_RATE_SHDW_MASK (0xffff << 0) - -/* SDRAM_TIM_1 */ -#define OMAP44XX_REG_T_RP_SHIFT 25 -#define OMAP44XX_REG_T_RP_MASK (0xf << 25) -#define OMAP44XX_REG_T_RCD_SHIFT 21 -#define OMAP44XX_REG_T_RCD_MASK (0xf << 21) -#define OMAP44XX_REG_T_WR_SHIFT 17 -#define OMAP44XX_REG_T_WR_MASK (0xf << 17) -#define OMAP44XX_REG_T_RAS_SHIFT 12 -#define OMAP44XX_REG_T_RAS_MASK (0x1f << 12) -#define OMAP44XX_REG_T_RC_SHIFT 6 -#define OMAP44XX_REG_T_RC_MASK (0x3f << 6) -#define OMAP44XX_REG_T_RRD_SHIFT 3 -#define OMAP44XX_REG_T_RRD_MASK (0x7 << 3) -#define OMAP44XX_REG_T_WTR_SHIFT 0 -#define OMAP44XX_REG_T_WTR_MASK (0x7 << 0) - -/* SDRAM_TIM_1_SHDW */ -#define OMAP44XX_REG_T_RP_SHDW_SHIFT 25 -#define OMAP44XX_REG_T_RP_SHDW_MASK (0xf << 25) -#define OMAP44XX_REG_T_RCD_SHDW_SHIFT 21 -#define OMAP44XX_REG_T_RCD_SHDW_MASK (0xf << 21) -#define OMAP44XX_REG_T_WR_SHDW_SHIFT 17 -#define OMAP44XX_REG_T_WR_SHDW_MASK (0xf << 17) -#define OMAP44XX_REG_T_RAS_SHDW_SHIFT 12 -#define OMAP44XX_REG_T_RAS_SHDW_MASK (0x1f << 12) -#define OMAP44XX_REG_T_RC_SHDW_SHIFT 6 -#define OMAP44XX_REG_T_RC_SHDW_MASK (0x3f << 6) -#define OMAP44XX_REG_T_RRD_SHDW_SHIFT 3 -#define OMAP44XX_REG_T_RRD_SHDW_MASK (0x7 << 3) -#define OMAP44XX_REG_T_WTR_SHDW_SHIFT 0 -#define OMAP44XX_REG_T_WTR_SHDW_MASK (0x7 << 0) - -/* SDRAM_TIM_2 */ -#define OMAP44XX_REG_T_XP_SHIFT 28 -#define OMAP44XX_REG_T_XP_MASK (0x7 << 28) -#define OMAP44XX_REG_T_ODT_SHIFT 25 -#define OMAP44XX_REG_T_ODT_MASK (0x7 << 25) -#define OMAP44XX_REG_T_XSNR_SHIFT 16 -#define OMAP44XX_REG_T_XSNR_MASK (0x1ff << 16) -#define OMAP44XX_REG_T_XSRD_SHIFT 6 -#define OMAP44XX_REG_T_XSRD_MASK (0x3ff << 6) -#define OMAP44XX_REG_T_RTP_SHIFT 3 -#define OMAP44XX_REG_T_RTP_MASK (0x7 << 3) -#define OMAP44XX_REG_T_CKE_SHIFT 0 -#define OMAP44XX_REG_T_CKE_MASK (0x7 << 0) - -/* SDRAM_TIM_2_SHDW */ -#define OMAP44XX_REG_T_XP_SHDW_SHIFT 28 -#define OMAP44XX_REG_T_XP_SHDW_MASK (0x7 << 28) -#define OMAP44XX_REG_T_ODT_SHDW_SHIFT 25 -#define OMAP44XX_REG_T_ODT_SHDW_MASK (0x7 << 25) -#define OMAP44XX_REG_T_XSNR_SHDW_SHIFT 16 -#define OMAP44XX_REG_T_XSNR_SHDW_MASK (0x1ff << 16) -#define OMAP44XX_REG_T_XSRD_SHDW_SHIFT 6 -#define OMAP44XX_REG_T_XSRD_SHDW_MASK (0x3ff << 6) -#define OMAP44XX_REG_T_RTP_SHDW_SHIFT 3 -#define OMAP44XX_REG_T_RTP_SHDW_MASK (0x7 << 3) -#define OMAP44XX_REG_T_CKE_SHDW_SHIFT 0 -#define OMAP44XX_REG_T_CKE_SHDW_MASK (0x7 << 0) - -/* SDRAM_TIM_3 */ -#define OMAP44XX_REG_T_CKESR_SHIFT 21 -#define OMAP44XX_REG_T_CKESR_MASK (0x7 << 21) -#define OMAP44XX_REG_ZQ_ZQCS_SHIFT 15 -#define OMAP44XX_REG_ZQ_ZQCS_MASK (0x3f << 15) -#define OMAP44XX_REG_T_TDQSCKMAX_SHIFT 13 -#define OMAP44XX_REG_T_TDQSCKMAX_MASK (0x3 << 13) -#define OMAP44XX_REG_T_RFC_SHIFT 4 -#define OMAP44XX_REG_T_RFC_MASK (0x1ff << 4) -#define OMAP44XX_REG_T_RAS_MAX_SHIFT 0 -#define OMAP44XX_REG_T_RAS_MAX_MASK (0xf << 0) - -/* SDRAM_TIM_3_SHDW */ -#define OMAP44XX_REG_T_CKESR_SHDW_SHIFT 21 -#define OMAP44XX_REG_T_CKESR_SHDW_MASK (0x7 << 21) -#define OMAP44XX_REG_ZQ_ZQCS_SHDW_SHIFT 15 -#define OMAP44XX_REG_ZQ_ZQCS_SHDW_MASK (0x3f << 15) -#define OMAP44XX_REG_T_TDQSCKMAX_SHDW_SHIFT 13 -#define OMAP44XX_REG_T_TDQSCKMAX_SHDW_MASK (0x3 << 13) -#define OMAP44XX_REG_T_RFC_SHDW_SHIFT 4 -#define OMAP44XX_REG_T_RFC_SHDW_MASK (0x1ff << 4) -#define OMAP44XX_REG_T_RAS_MAX_SHDW_SHIFT 0 -#define OMAP44XX_REG_T_RAS_MAX_SHDW_MASK (0xf << 0) - -/* LPDDR2_NVM_TIM */ -#define OMAP44XX_REG_NVM_T_XP_SHIFT 28 -#define OMAP44XX_REG_NVM_T_XP_MASK (0x7 << 28) -#define OMAP44XX_REG_NVM_T_WTR_SHIFT 24 -#define OMAP44XX_REG_NVM_T_WTR_MASK (0x7 << 24) -#define OMAP44XX_REG_NVM_T_RP_SHIFT 20 -#define OMAP44XX_REG_NVM_T_RP_MASK (0xf << 20) -#define OMAP44XX_REG_NVM_T_WRA_SHIFT 16 -#define OMAP44XX_REG_NVM_T_WRA_MASK (0xf << 16) -#define OMAP44XX_REG_NVM_T_RRD_SHIFT 8 -#define OMAP44XX_REG_NVM_T_RRD_MASK (0xff << 8) -#define OMAP44XX_REG_NVM_T_RCDMIN_SHIFT 0 -#define OMAP44XX_REG_NVM_T_RCDMIN_MASK (0xff << 0) - -/* LPDDR2_NVM_TIM_SHDW */ -#define OMAP44XX_REG_NVM_T_XP_SHDW_SHIFT 28 -#define OMAP44XX_REG_NVM_T_XP_SHDW_MASK (0x7 << 28) -#define OMAP44XX_REG_NVM_T_WTR_SHDW_SHIFT 24 -#define OMAP44XX_REG_NVM_T_WTR_SHDW_MASK (0x7 << 24) -#define OMAP44XX_REG_NVM_T_RP_SHDW_SHIFT 20 -#define OMAP44XX_REG_NVM_T_RP_SHDW_MASK (0xf << 20) -#define OMAP44XX_REG_NVM_T_WRA_SHDW_SHIFT 16 -#define OMAP44XX_REG_NVM_T_WRA_SHDW_MASK (0xf << 16) -#define OMAP44XX_REG_NVM_T_RRD_SHDW_SHIFT 8 -#define OMAP44XX_REG_NVM_T_RRD_SHDW_MASK (0xff << 8) -#define OMAP44XX_REG_NVM_T_RCDMIN_SHDW_SHIFT 0 -#define OMAP44XX_REG_NVM_T_RCDMIN_SHDW_MASK (0xff << 0) - -/* PWR_MGMT_CTRL */ -#define OMAP44XX_REG_IDLEMODE_SHIFT 30 -#define OMAP44XX_REG_IDLEMODE_MASK (0x3 << 30) -#define OMAP44XX_REG_PD_TIM_SHIFT 12 -#define OMAP44XX_REG_PD_TIM_MASK (0xf << 12) -#define OMAP44XX_REG_DPD_EN_SHIFT 11 -#define OMAP44XX_REG_DPD_EN_MASK (1 << 11) -#define OMAP44XX_REG_LP_MODE_SHIFT 8 -#define OMAP44XX_REG_LP_MODE_MASK (0x7 << 8) -#define OMAP44XX_REG_SR_TIM_SHIFT 4 -#define OMAP44XX_REG_SR_TIM_MASK (0xf << 4) -#define OMAP44XX_REG_CS_TIM_SHIFT 0 -#define OMAP44XX_REG_CS_TIM_MASK (0xf << 0) - -/* PWR_MGMT_CTRL_SHDW */ -#define OMAP44XX_REG_PD_TIM_SHDW_SHIFT 8 -#define OMAP44XX_REG_PD_TIM_SHDW_MASK (0xf << 8) -#define OMAP44XX_REG_SR_TIM_SHDW_SHIFT 4 -#define OMAP44XX_REG_SR_TIM_SHDW_MASK (0xf << 4) -#define OMAP44XX_REG_CS_TIM_SHDW_SHIFT 0 -#define OMAP44XX_REG_CS_TIM_SHDW_MASK (0xf << 0) - -/* LPDDR2_MODE_REG_DATA */ -#define OMAP44XX_REG_VALUE_0_SHIFT 0 -#define OMAP44XX_REG_VALUE_0_MASK (0x7f << 0) - -/* LPDDR2_MODE_REG_CFG */ -#define OMAP44XX_REG_CS_SHIFT 31 -#define OMAP44XX_REG_CS_MASK (1 << 31) -#define OMAP44XX_REG_REFRESH_EN_SHIFT 30 -#define OMAP44XX_REG_REFRESH_EN_MASK (1 << 30) -#define OMAP44XX_REG_ADDRESS_SHIFT 0 -#define OMAP44XX_REG_ADDRESS_MASK (0xff << 0) - -/* OCP_CONFIG */ -#define OMAP44XX_REG_SYS_THRESH_MAX_SHIFT 24 -#define OMAP44XX_REG_SYS_THRESH_MAX_MASK (0xf << 24) -#define OMAP44XX_REG_MPU_THRESH_MAX_SHIFT 20 -#define OMAP44XX_REG_MPU_THRESH_MAX_MASK (0xf << 20) -#define OMAP44XX_REG_LL_THRESH_MAX_SHIFT 16 -#define OMAP44XX_REG_LL_THRESH_MAX_MASK (0xf << 16) -#define OMAP44XX_REG_PR_OLD_COUNT_SHIFT 0 -#define OMAP44XX_REG_PR_OLD_COUNT_MASK (0xff << 0) - -/* OCP_CFG_VAL_1 */ -#define OMAP44XX_REG_SYS_BUS_WIDTH_SHIFT 30 -#define OMAP44XX_REG_SYS_BUS_WIDTH_MASK (0x3 << 30) -#define OMAP44XX_REG_LL_BUS_WIDTH_SHIFT 28 -#define OMAP44XX_REG_LL_BUS_WIDTH_MASK (0x3 << 28) -#define OMAP44XX_REG_WR_FIFO_DEPTH_SHIFT 8 -#define OMAP44XX_REG_WR_FIFO_DEPTH_MASK (0xff << 8) -#define OMAP44XX_REG_CMD_FIFO_DEPTH_SHIFT 0 -#define OMAP44XX_REG_CMD_FIFO_DEPTH_MASK (0xff << 0) - -/* OCP_CFG_VAL_2 */ -#define OMAP44XX_REG_RREG_FIFO_DEPTH_SHIFT 16 -#define OMAP44XX_REG_RREG_FIFO_DEPTH_MASK (0xff << 16) -#define OMAP44XX_REG_RSD_FIFO_DEPTH_SHIFT 8 -#define OMAP44XX_REG_RSD_FIFO_DEPTH_MASK (0xff << 8) -#define OMAP44XX_REG_RCMD_FIFO_DEPTH_SHIFT 0 -#define OMAP44XX_REG_RCMD_FIFO_DEPTH_MASK (0xff << 0) - -/* IODFT_TLGC */ -#define OMAP44XX_REG_TLEC_SHIFT 16 -#define OMAP44XX_REG_TLEC_MASK (0xffff << 16) -#define OMAP44XX_REG_MT_SHIFT 14 -#define OMAP44XX_REG_MT_MASK (1 << 14) -#define OMAP44XX_REG_ACT_CAP_EN_SHIFT 13 -#define OMAP44XX_REG_ACT_CAP_EN_MASK (1 << 13) -#define OMAP44XX_REG_OPG_LD_SHIFT 12 -#define OMAP44XX_REG_OPG_LD_MASK (1 << 12) -#define OMAP44XX_REG_RESET_PHY_SHIFT 10 -#define OMAP44XX_REG_RESET_PHY_MASK (1 << 10) -#define OMAP44XX_REG_MMS_SHIFT 8 -#define OMAP44XX_REG_MMS_MASK (1 << 8) -#define OMAP44XX_REG_MC_SHIFT 4 -#define OMAP44XX_REG_MC_MASK (0x3 << 4) -#define OMAP44XX_REG_PC_SHIFT 1 -#define OMAP44XX_REG_PC_MASK (0x7 << 1) -#define OMAP44XX_REG_TM_SHIFT 0 -#define OMAP44XX_REG_TM_MASK (1 << 0) - -/* IODFT_CTRL_MISR_RSLT */ -#define OMAP44XX_REG_DQM_TLMR_SHIFT 16 -#define OMAP44XX_REG_DQM_TLMR_MASK (0x3ff << 16) -#define OMAP44XX_REG_CTL_TLMR_SHIFT 0 -#define OMAP44XX_REG_CTL_TLMR_MASK (0x7ff << 0) - -/* IODFT_ADDR_MISR_RSLT */ -#define OMAP44XX_REG_ADDR_TLMR_SHIFT 0 -#define OMAP44XX_REG_ADDR_TLMR_MASK (0x1fffff << 0) - -/* IODFT_DATA_MISR_RSLT_1 */ -#define OMAP44XX_REG_DATA_TLMR_31_0_SHIFT 0 -#define OMAP44XX_REG_DATA_TLMR_31_0_MASK (0xffffffff << 0) - -/* IODFT_DATA_MISR_RSLT_2 */ -#define OMAP44XX_REG_DATA_TLMR_63_32_SHIFT 0 -#define OMAP44XX_REG_DATA_TLMR_63_32_MASK (0xffffffff << 0) - -/* IODFT_DATA_MISR_RSLT_3 */ -#define OMAP44XX_REG_DATA_TLMR_66_64_SHIFT 0 -#define OMAP44XX_REG_DATA_TLMR_66_64_MASK (0x7 << 0) - -/* PERF_CNT_1 */ -#define OMAP44XX_REG_COUNTER1_SHIFT 0 -#define OMAP44XX_REG_COUNTER1_MASK (0xffffffff << 0) - -/* PERF_CNT_2 */ -#define OMAP44XX_REG_COUNTER2_SHIFT 0 -#define OMAP44XX_REG_COUNTER2_MASK (0xffffffff << 0) - -/* PERF_CNT_CFG */ -#define OMAP44XX_REG_CNTR2_MCONNID_EN_SHIFT 31 -#define OMAP44XX_REG_CNTR2_MCONNID_EN_MASK (1 << 31) -#define OMAP44XX_REG_CNTR2_REGION_EN_SHIFT 30 -#define OMAP44XX_REG_CNTR2_REGION_EN_MASK (1 << 30) -#define OMAP44XX_REG_CNTR2_CFG_SHIFT 16 -#define OMAP44XX_REG_CNTR2_CFG_MASK (0xf << 16) -#define OMAP44XX_REG_CNTR1_MCONNID_EN_SHIFT 15 -#define OMAP44XX_REG_CNTR1_MCONNID_EN_MASK (1 << 15) -#define OMAP44XX_REG_CNTR1_REGION_EN_SHIFT 14 -#define OMAP44XX_REG_CNTR1_REGION_EN_MASK (1 << 14) -#define OMAP44XX_REG_CNTR1_CFG_SHIFT 0 -#define OMAP44XX_REG_CNTR1_CFG_MASK (0xf << 0) - -/* PERF_CNT_SEL */ -#define OMAP44XX_REG_MCONNID2_SHIFT 24 -#define OMAP44XX_REG_MCONNID2_MASK (0xff << 24) -#define OMAP44XX_REG_REGION_SEL2_SHIFT 16 -#define OMAP44XX_REG_REGION_SEL2_MASK (0x3 << 16) -#define OMAP44XX_REG_MCONNID1_SHIFT 8 -#define OMAP44XX_REG_MCONNID1_MASK (0xff << 8) -#define OMAP44XX_REG_REGION_SEL1_SHIFT 0 -#define OMAP44XX_REG_REGION_SEL1_MASK (0x3 << 0) - -/* PERF_CNT_TIM */ -#define OMAP44XX_REG_TOTAL_TIME_SHIFT 0 -#define OMAP44XX_REG_TOTAL_TIME_MASK (0xffffffff << 0) - -/* READ_IDLE_CTRL */ -#define OMAP44XX_REG_READ_IDLE_LEN_SHIFT 16 -#define OMAP44XX_REG_READ_IDLE_LEN_MASK (0xf << 16) -#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHIFT 0 -#define OMAP44XX_REG_READ_IDLE_INTERVAL_MASK (0x1ff << 0) - -/* READ_IDLE_CTRL_SHDW */ -#define OMAP44XX_REG_READ_IDLE_LEN_SHDW_SHIFT 16 -#define OMAP44XX_REG_READ_IDLE_LEN_SHDW_MASK (0xf << 16) -#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHDW_SHIFT 0 -#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHDW_MASK (0x1ff << 0) - -/* IRQ_EOI */ -#define OMAP44XX_REG_EOI_SHIFT 0 -#define OMAP44XX_REG_EOI_MASK (1 << 0) - -/* IRQSTATUS_RAW_SYS */ -#define OMAP44XX_REG_DNV_SYS_SHIFT 2 -#define OMAP44XX_REG_DNV_SYS_MASK (1 << 2) -#define OMAP44XX_REG_TA_SYS_SHIFT 1 -#define OMAP44XX_REG_TA_SYS_MASK (1 << 1) -#define OMAP44XX_REG_ERR_SYS_SHIFT 0 -#define OMAP44XX_REG_ERR_SYS_MASK (1 << 0) - -/* IRQSTATUS_RAW_LL */ -#define OMAP44XX_REG_DNV_LL_SHIFT 2 -#define OMAP44XX_REG_DNV_LL_MASK (1 << 2) -#define OMAP44XX_REG_TA_LL_SHIFT 1 -#define OMAP44XX_REG_TA_LL_MASK (1 << 1) -#define OMAP44XX_REG_ERR_LL_SHIFT 0 -#define OMAP44XX_REG_ERR_LL_MASK (1 << 0) - -/* IRQSTATUS_SYS */ - -/* IRQSTATUS_LL */ - -/* IRQENABLE_SET_SYS */ -#define OMAP44XX_REG_EN_DNV_SYS_SHIFT 2 -#define OMAP44XX_REG_EN_DNV_SYS_MASK (1 << 2) -#define OMAP44XX_REG_EN_TA_SYS_SHIFT 1 -#define OMAP44XX_REG_EN_TA_SYS_MASK (1 << 1) -#define OMAP44XX_REG_EN_ERR_SYS_SHIFT 0 -#define OMAP44XX_REG_EN_ERR_SYS_MASK (1 << 0) - -/* IRQENABLE_SET_LL */ -#define OMAP44XX_REG_EN_DNV_LL_SHIFT 2 -#define OMAP44XX_REG_EN_DNV_LL_MASK (1 << 2) -#define OMAP44XX_REG_EN_TA_LL_SHIFT 1 -#define OMAP44XX_REG_EN_TA_LL_MASK (1 << 1) -#define OMAP44XX_REG_EN_ERR_LL_SHIFT 0 -#define OMAP44XX_REG_EN_ERR_LL_MASK (1 << 0) - -/* IRQENABLE_CLR_SYS */ - -/* IRQENABLE_CLR_LL */ - -/* ZQ_CONFIG */ -#define OMAP44XX_REG_ZQ_CS1EN_SHIFT 31 -#define OMAP44XX_REG_ZQ_CS1EN_MASK (1 << 31) -#define OMAP44XX_REG_ZQ_CS0EN_SHIFT 30 -#define OMAP44XX_REG_ZQ_CS0EN_MASK (1 << 30) -#define OMAP44XX_REG_ZQ_DUALCALEN_SHIFT 29 -#define OMAP44XX_REG_ZQ_DUALCALEN_MASK (1 << 29) -#define OMAP44XX_REG_ZQ_SFEXITEN_SHIFT 28 -#define OMAP44XX_REG_ZQ_SFEXITEN_MASK (1 << 28) -#define OMAP44XX_REG_ZQ_ZQINIT_MULT_SHIFT 18 -#define OMAP44XX_REG_ZQ_ZQINIT_MULT_MASK (0x3 << 18) -#define OMAP44XX_REG_ZQ_ZQCL_MULT_SHIFT 16 -#define OMAP44XX_REG_ZQ_ZQCL_MULT_MASK (0x3 << 16) -#define OMAP44XX_REG_ZQ_REFINTERVAL_SHIFT 0 -#define OMAP44XX_REG_ZQ_REFINTERVAL_MASK (0xffff << 0) - -/* TEMP_ALERT_CONFIG */ -#define OMAP44XX_REG_TA_CS1EN_SHIFT 31 -#define OMAP44XX_REG_TA_CS1EN_MASK (1 << 31) -#define OMAP44XX_REG_TA_CS0EN_SHIFT 30 -#define OMAP44XX_REG_TA_CS0EN_MASK (1 << 30) -#define OMAP44XX_REG_TA_SFEXITEN_SHIFT 28 -#define OMAP44XX_REG_TA_SFEXITEN_MASK (1 << 28) -#define OMAP44XX_REG_TA_DEVWDT_SHIFT 26 -#define OMAP44XX_REG_TA_DEVWDT_MASK (0x3 << 26) -#define OMAP44XX_REG_TA_DEVCNT_SHIFT 24 -#define OMAP44XX_REG_TA_DEVCNT_MASK (0x3 << 24) -#define OMAP44XX_REG_TA_REFINTERVAL_SHIFT 0 -#define OMAP44XX_REG_TA_REFINTERVAL_MASK (0x3fffff << 0) - -/* OCP_ERR_LOG */ -#define OMAP44XX_REG_MADDRSPACE_SHIFT 14 -#define OMAP44XX_REG_MADDRSPACE_MASK (0x3 << 14) -#define OMAP44XX_REG_MBURSTSEQ_SHIFT 11 -#define OMAP44XX_REG_MBURSTSEQ_MASK (0x7 << 11) -#define OMAP44XX_REG_MCMD_SHIFT 8 -#define OMAP44XX_REG_MCMD_MASK (0x7 << 8) -#define OMAP44XX_REG_MCONNID_SHIFT 0 -#define OMAP44XX_REG_MCONNID_MASK (0xff << 0) - -/* DDR_PHY_CTRL_1 */ -#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHIFT 4 -#define OMAP44XX_REG_DDR_PHY_CTRL_1_MASK (0xfffffff << 4) -#define OMAP44XX_REG_READ_LATENCY_SHIFT 0 -#define OMAP44XX_REG_READ_LATENCY_MASK (0xf << 0) -#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHIFT 4 -#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_MASK (0xFF << 4) -#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT 12 -#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_MASK (0xFFFFF << 12) - -/* DDR_PHY_CTRL_1_SHDW */ -#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHDW_SHIFT 4 -#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHDW_MASK (0xfffffff << 4) -#define OMAP44XX_REG_READ_LATENCY_SHDW_SHIFT 0 -#define OMAP44XX_REG_READ_LATENCY_SHDW_MASK (0xf << 0) -#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHDW_SHIFT 4 -#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHDW_MASK (0xFF << 4) -#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_SHIFT 12 -#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_MASK (0xFFFFF << 12) - -/* DDR_PHY_CTRL_2 */ -#define OMAP44XX_REG_DDR_PHY_CTRL_2_SHIFT 0 -#define OMAP44XX_REG_DDR_PHY_CTRL_2_MASK (0xffffffff << 0) - -/* DMM */ -#define OMAP44XX_DMM_LISA_MAP_BASE 0x4E000040 - -/* Memory Adapter (4460 onwards) */ -#define OMAP44XX_MA_LISA_MAP_BASE 0x482AF040 - -/* DMM_LISA_MAP */ -#define OMAP44XX_SYS_ADDR_SHIFT 24 -#define OMAP44XX_SYS_ADDR_MASK (0xff << 24) -#define OMAP44XX_SYS_SIZE_SHIFT 20 -#define OMAP44XX_SYS_SIZE_MASK (0x7 << 20) -#define OMAP44XX_SDRC_INTL_SHIFT 18 -#define OMAP44XX_SDRC_INTL_MASK (0x3 << 18) -#define OMAP44XX_SDRC_ADDRSPC_SHIFT 16 -#define OMAP44XX_SDRC_ADDRSPC_MASK (0x3 << 16) -#define OMAP44XX_SDRC_MAP_SHIFT 8 -#define OMAP44XX_SDRC_MAP_MASK (0x3 << 8) -#define OMAP44XX_SDRC_ADDR_SHIFT 0 -#define OMAP44XX_SDRC_ADDR_MASK (0xff << 0) - -/* DMM_LISA_MAP fields */ -#define DMM_SDRC_MAP_UNMAPPED 0 -#define DMM_SDRC_MAP_EMIF1_ONLY 1 -#define DMM_SDRC_MAP_EMIF2_ONLY 2 -#define DMM_SDRC_MAP_EMIF1_AND_EMIF2 3 - -#define DMM_SDRC_INTL_NONE 0 -#define DMM_SDRC_INTL_128B 1 -#define DMM_SDRC_INTL_256B 2 -#define DMM_SDRC_INTL_512 3 - -#define DMM_SDRC_ADDR_SPC_SDRAM 0 -#define DMM_SDRC_ADDR_SPC_NVM 1 -#define DMM_SDRC_ADDR_SPC_INVALID 2 - -#define DMM_LISA_MAP_INTERLEAVED_BASE_VAL (\ - (DMM_SDRC_MAP_EMIF1_AND_EMIF2 << OMAP44XX_SDRC_MAP_SHIFT) |\ - (DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT) |\ - (DMM_SDRC_INTL_128B << OMAP44XX_SDRC_INTL_SHIFT) |\ - (CONFIG_SYS_SDRAM_BASE << OMAP44XX_SYS_ADDR_SHIFT)) - -#define DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL (\ - (DMM_SDRC_MAP_EMIF1_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\ - (DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\ - (DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT)) - -#define DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL (\ - (DMM_SDRC_MAP_EMIF2_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\ - (DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\ - (DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT)) - -/* Trap for invalid TILER PAT entries */ -#define DMM_LISA_MAP_0_INVAL_ADDR_TRAP (\ - (0 << OMAP44XX_SDRC_ADDR_SHIFT) |\ - (DMM_SDRC_MAP_EMIF1_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\ - (DMM_SDRC_ADDR_SPC_INVALID << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\ - (DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT)|\ - (0xFF << OMAP44XX_SYS_ADDR_SHIFT)) - - -/* Reg mapping structure */ -struct emif_reg_struct { - u32 emif_mod_id_rev; - u32 emif_status; - u32 emif_sdram_config; - u32 emif_lpddr2_nvm_config; - u32 emif_sdram_ref_ctrl; - u32 emif_sdram_ref_ctrl_shdw; - u32 emif_sdram_tim_1; - u32 emif_sdram_tim_1_shdw; - u32 emif_sdram_tim_2; - u32 emif_sdram_tim_2_shdw; - u32 emif_sdram_tim_3; - u32 emif_sdram_tim_3_shdw; - u32 emif_lpddr2_nvm_tim; - u32 emif_lpddr2_nvm_tim_shdw; - u32 emif_pwr_mgmt_ctrl; - u32 emif_pwr_mgmt_ctrl_shdw; - u32 emif_lpddr2_mode_reg_data; - u32 padding1[1]; - u32 emif_lpddr2_mode_reg_data_es2; - u32 padding11[1]; - u32 emif_lpddr2_mode_reg_cfg; - u32 emif_l3_config; - u32 emif_l3_cfg_val_1; - u32 emif_l3_cfg_val_2; - u32 emif_iodft_tlgc; - u32 padding2[7]; - u32 emif_perf_cnt_1; - u32 emif_perf_cnt_2; - u32 emif_perf_cnt_cfg; - u32 emif_perf_cnt_sel; - u32 emif_perf_cnt_tim; - u32 padding3; - u32 emif_read_idlectrl; - u32 emif_read_idlectrl_shdw; - u32 padding4; - u32 emif_irqstatus_raw_sys; - u32 emif_irqstatus_raw_ll; - u32 emif_irqstatus_sys; - u32 emif_irqstatus_ll; - u32 emif_irqenable_set_sys; - u32 emif_irqenable_set_ll; - u32 emif_irqenable_clr_sys; - u32 emif_irqenable_clr_ll; - u32 padding5; - u32 emif_zq_config; - u32 emif_temp_alert_config; - u32 emif_l3_err_log; - u32 padding6[4]; - u32 emif_ddr_phy_ctrl_1; - u32 emif_ddr_phy_ctrl_1_shdw; - u32 emif_ddr_phy_ctrl_2; -}; - -struct dmm_lisa_map_regs { - u32 dmm_lisa_map_0; - u32 dmm_lisa_map_1; - u32 dmm_lisa_map_2; - u32 dmm_lisa_map_3; -}; - -#define CS0 0 -#define CS1 1 -/* The maximum frequency at which the LPDDR2 interface can operate in Hz*/ -#define MAX_LPDDR2_FREQ 400000000 /* 400 MHz */ - -/* - * The period of DDR clk is represented as numerator and denominator for - * better accuracy in integer based calculations. However, if the numerator - * and denominator are very huge there may be chances of overflow in - * calculations. So, as a trade-off keep denominator(and consequently - * numerator) within a limit sacrificing some accuracy - but not much - * If denominator and numerator are already small (such as at 400 MHz) - * no adjustment is needed - */ -#define EMIF_PERIOD_DEN_LIMIT 1000 -/* - * Maximum number of different frequencies supported by EMIF driver - * Determines the number of entries in the pointer array for register - * cache - */ -#define EMIF_MAX_NUM_FREQUENCIES 6 -/* - * Indices into the Addressing Table array. - * One entry each for all the different types of devices with different - * addressing schemes - */ -#define ADDR_TABLE_INDEX64M 0 -#define ADDR_TABLE_INDEX128M 1 -#define ADDR_TABLE_INDEX256M 2 -#define ADDR_TABLE_INDEX512M 3 -#define ADDR_TABLE_INDEX1GS4 4 -#define ADDR_TABLE_INDEX2GS4 5 -#define ADDR_TABLE_INDEX4G 6 -#define ADDR_TABLE_INDEX8G 7 -#define ADDR_TABLE_INDEX1GS2 8 -#define ADDR_TABLE_INDEX2GS2 9 -#define ADDR_TABLE_INDEXMAX 10 - -/* Number of Row bits */ -#define ROW_9 0 -#define ROW_10 1 -#define ROW_11 2 -#define ROW_12 3 -#define ROW_13 4 -#define ROW_14 5 -#define ROW_15 6 -#define ROW_16 7 - -/* Number of Column bits */ -#define COL_8 0 -#define COL_9 1 -#define COL_10 2 -#define COL_11 3 -#define COL_7 4 /*Not supported by OMAP included for completeness */ - -/* Number of Banks*/ -#define BANKS1 0 -#define BANKS2 1 -#define BANKS4 2 -#define BANKS8 3 - -/* Refresh rate in micro seconds x 10 */ -#define T_REFI_15_6 156 -#define T_REFI_7_8 78 -#define T_REFI_3_9 39 - -#define EBANK_CS1_DIS 0 -#define EBANK_CS1_EN 1 - -/* Read Latency used by the device at reset */ -#define RL_BOOT 3 -/* Read Latency for the highest frequency you want to use */ -#define RL_FINAL 6 - -/* Interleaving policies at EMIF level- between banks and Chip Selects */ -#define EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING 0 -#define EMIF_INTERLEAVING_POLICY_NO_BANK_INTERLEAVING 3 - -/* - * Interleaving policy to be used - * Currently set to MAX interleaving for better performance - */ -#define EMIF_INTERLEAVING_POLICY EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING - -/* State of the core voltage: - * This is important for some parameters such as read idle control and - * ZQ calibration timings. Timings are much stricter when voltage ramp - * is happening compared to when the voltage is stable. - * We need to calculate two sets of values for these parameters and use - * them accordingly - */ -#define LPDDR2_VOLTAGE_STABLE 0 -#define LPDDR2_VOLTAGE_RAMPING 1 - -/* Length of the forced read idle period in terms of cycles */ -#define EMIF_REG_READ_IDLE_LEN_VAL 5 - -/* Interval between forced 'read idles' */ -/* To be used when voltage is changed for DPS/DVFS - 1us */ -#define READ_IDLE_INTERVAL_DVFS (1*1000) -/* - * To be used when voltage is not scaled except by Smart Reflex - * 50us - or maximum value will do - */ -#define READ_IDLE_INTERVAL_NORMAL (50*1000) - - -/* - * Unless voltage is changing due to DVFS one ZQCS command every 50ms should - * be enough. This shoule be enough also in the case when voltage is changing - * due to smart-reflex. - */ -#define EMIF_ZQCS_INTERVAL_NORMAL_IN_US (50*1000) -/* - * If voltage is changing due to DVFS ZQCS should be performed more - * often(every 50us) - */ -#define EMIF_ZQCS_INTERVAL_DVFS_IN_US 50 - -/* The interval between ZQCL commands as a multiple of ZQCS interval */ -#define REG_ZQ_ZQCL_MULT 4 -/* The interval between ZQINIT commands as a multiple of ZQCL interval */ -#define REG_ZQ_ZQINIT_MULT 3 -/* Enable ZQ Calibration on exiting Self-refresh */ -#define REG_ZQ_SFEXITEN_ENABLE 1 -/* - * ZQ Calibration simultaneously on both chip-selects: - * Needs one calibration resistor per CS - * None of the boards that we know of have this capability - * So disabled by default - */ -#define REG_ZQ_DUALCALEN_DISABLE 0 -/* - * Enable ZQ Calibration by default on CS0. If we are asked to program - * the EMIF there will be something connected to CS0 for sure - */ -#define REG_ZQ_CS0EN_ENABLE 1 - -/* EMIF_PWR_MGMT_CTRL register */ -/* Low power modes */ -#define LP_MODE_DISABLE 0 -#define LP_MODE_CLOCK_STOP 1 -#define LP_MODE_SELF_REFRESH 2 -#define LP_MODE_PWR_DN 3 - -/* REG_DPD_EN */ -#define DPD_DISABLE 0 -#define DPD_ENABLE 1 - -/* Maximum delay before Low Power Modes */ -#define REG_CS_TIM 0xF -#define REG_SR_TIM 0xF -#define REG_PD_TIM 0xF - -/* EMIF_PWR_MGMT_CTRL register */ -#define EMIF_PWR_MGMT_CTRL (\ - ((REG_CS_TIM << OMAP44XX_REG_CS_TIM_SHIFT) & OMAP44XX_REG_CS_TIM_MASK)|\ - ((REG_SR_TIM << OMAP44XX_REG_SR_TIM_SHIFT) & OMAP44XX_REG_SR_TIM_MASK)|\ - ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHIFT) & OMAP44XX_REG_PD_TIM_MASK)|\ - ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHIFT) & OMAP44XX_REG_PD_TIM_MASK)|\ - ((LP_MODE_DISABLE << OMAP44XX_REG_LP_MODE_SHIFT)\ - & OMAP44XX_REG_LP_MODE_MASK) |\ - ((DPD_DISABLE << OMAP44XX_REG_DPD_EN_SHIFT)\ - & OMAP44XX_REG_DPD_EN_MASK))\ - -#define EMIF_PWR_MGMT_CTRL_SHDW (\ - ((REG_CS_TIM << OMAP44XX_REG_CS_TIM_SHDW_SHIFT)\ - & OMAP44XX_REG_CS_TIM_SHDW_MASK) |\ - ((REG_SR_TIM << OMAP44XX_REG_SR_TIM_SHDW_SHIFT)\ - & OMAP44XX_REG_SR_TIM_SHDW_MASK) |\ - ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHDW_SHIFT)\ - & OMAP44XX_REG_PD_TIM_SHDW_MASK) |\ - ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHDW_SHIFT)\ - & OMAP44XX_REG_PD_TIM_SHDW_MASK)) - -/* EMIF_L3_CONFIG register value */ -#define EMIF_L3_CONFIG_VAL_SYS_10_LL_0 0x0A0000FF -#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0 0x0A300000 -/* - * Value of bits 12:31 of DDR_PHY_CTRL_1 register: - * All these fields have magic values dependent on frequency and - * determined by PHY and DLL integration with EMIF. Setting the magic - * values suggested by hw team. - */ -#define EMIF_DDR_PHY_CTRL_1_BASE_VAL 0x049FF -#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ 0x41 -#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ 0x80 -#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS 0xFF - -/* -* MR1 value: -* Burst length : 8 -* Burst type : sequential -* Wrap : enabled -* nWR : 3(default). EMIF does not do pre-charge. -* : So nWR is don't care -*/ -#define MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3 0x23 - -/* MR2 */ -#define MR2_RL3_WL1 1 -#define MR2_RL4_WL2 2 -#define MR2_RL5_WL2 3 -#define MR2_RL6_WL3 4 - -/* MR10: ZQ calibration codes */ -#define MR10_ZQ_ZQCS 0x56 -#define MR10_ZQ_ZQCL 0xAB -#define MR10_ZQ_ZQINIT 0xFF -#define MR10_ZQ_ZQRESET 0xC3 - -/* TEMP_ALERT_CONFIG */ -#define TEMP_ALERT_POLL_INTERVAL_MS 360 /* for temp gradient - 5 C/s */ -#define TEMP_ALERT_CONFIG_DEVCT_1 0 -#define TEMP_ALERT_CONFIG_DEVWDT_32 2 - -/* MR16 value: refresh full array(no partial array self refresh) */ -#define MR16_REF_FULL_ARRAY 0 - -/* - * Maximum number of entries we keep in our array of timing tables - * We need not keep all the speed bins supported by the device - * We need to keep timing tables for only the speed bins that we - * are interested in - */ -#define MAX_NUM_SPEEDBINS 4 - -/* LPDDR2 Densities */ -#define LPDDR2_DENSITY_64Mb 0 -#define LPDDR2_DENSITY_128Mb 1 -#define LPDDR2_DENSITY_256Mb 2 -#define LPDDR2_DENSITY_512Mb 3 -#define LPDDR2_DENSITY_1Gb 4 -#define LPDDR2_DENSITY_2Gb 5 -#define LPDDR2_DENSITY_4Gb 6 -#define LPDDR2_DENSITY_8Gb 7 -#define LPDDR2_DENSITY_16Gb 8 -#define LPDDR2_DENSITY_32Gb 9 - -/* LPDDR2 type */ -#define LPDDR2_TYPE_S4 0 -#define LPDDR2_TYPE_S2 1 -#define LPDDR2_TYPE_NVM 2 - -/* LPDDR2 IO width */ -#define LPDDR2_IO_WIDTH_32 0 -#define LPDDR2_IO_WIDTH_16 1 -#define LPDDR2_IO_WIDTH_8 2 - -/* Mode register numbers */ -#define LPDDR2_MR0 0 -#define LPDDR2_MR1 1 -#define LPDDR2_MR2 2 -#define LPDDR2_MR3 3 -#define LPDDR2_MR4 4 -#define LPDDR2_MR5 5 -#define LPDDR2_MR6 6 -#define LPDDR2_MR7 7 -#define LPDDR2_MR8 8 -#define LPDDR2_MR9 9 -#define LPDDR2_MR10 10 -#define LPDDR2_MR11 11 -#define LPDDR2_MR16 16 -#define LPDDR2_MR17 17 -#define LPDDR2_MR18 18 - -/* MR0 */ -#define LPDDR2_MR0_DAI_SHIFT 0 -#define LPDDR2_MR0_DAI_MASK 1 -#define LPDDR2_MR0_DI_SHIFT 1 -#define LPDDR2_MR0_DI_MASK (1 << 1) -#define LPDDR2_MR0_DNVI_SHIFT 2 -#define LPDDR2_MR0_DNVI_MASK (1 << 2) - -/* MR4 */ -#define MR4_SDRAM_REF_RATE_SHIFT 0 -#define MR4_SDRAM_REF_RATE_MASK 7 -#define MR4_TUF_SHIFT 7 -#define MR4_TUF_MASK (1 << 7) - -/* MR4 SDRAM Refresh Rate field values */ -#define SDRAM_TEMP_LESS_LOW_SHUTDOWN 0x0 -#define SDRAM_TEMP_LESS_4X_REFRESH_AND_TIMINGS 0x1 -#define SDRAM_TEMP_LESS_2X_REFRESH_AND_TIMINGS 0x2 -#define SDRAM_TEMP_NOMINAL 0x3 -#define SDRAM_TEMP_RESERVED_4 0x4 -#define SDRAM_TEMP_HIGH_DERATE_REFRESH 0x5 -#define SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS 0x6 -#define SDRAM_TEMP_VERY_HIGH_SHUTDOWN 0x7 - -#define LPDDR2_MANUFACTURER_SAMSUNG 1 -#define LPDDR2_MANUFACTURER_QIMONDA 2 -#define LPDDR2_MANUFACTURER_ELPIDA 3 -#define LPDDR2_MANUFACTURER_ETRON 4 -#define LPDDR2_MANUFACTURER_NANYA 5 -#define LPDDR2_MANUFACTURER_HYNIX 6 -#define LPDDR2_MANUFACTURER_MOSEL 7 -#define LPDDR2_MANUFACTURER_WINBOND 8 -#define LPDDR2_MANUFACTURER_ESMT 9 -#define LPDDR2_MANUFACTURER_SPANSION 11 -#define LPDDR2_MANUFACTURER_SST 12 -#define LPDDR2_MANUFACTURER_ZMOS 13 -#define LPDDR2_MANUFACTURER_INTEL 14 -#define LPDDR2_MANUFACTURER_NUMONYX 254 -#define LPDDR2_MANUFACTURER_MICRON 255 - -/* MR8 register fields */ -#define MR8_TYPE_SHIFT 0x0 -#define MR8_TYPE_MASK 0x3 -#define MR8_DENSITY_SHIFT 0x2 -#define MR8_DENSITY_MASK (0xF << 0x2) -#define MR8_IO_WIDTH_SHIFT 0x6 -#define MR8_IO_WIDTH_MASK (0x3 << 0x6) - -struct lpddr2_addressing { - u8 num_banks; - u8 t_REFI_us_x10; - u8 row_sz[2]; /* One entry each for x32 and x16 */ - u8 col_sz[2]; /* One entry each for x32 and x16 */ -}; - -/* Structure for timings from the DDR datasheet */ -struct lpddr2_ac_timings { - u32 max_freq; - u8 RL; - u8 tRPab; - u8 tRCD; - u8 tWR; - u8 tRASmin; - u8 tRRD; - u8 tWTRx2; - u8 tXSR; - u8 tXPx2; - u8 tRFCab; - u8 tRTPx2; - u8 tCKE; - u8 tCKESR; - u8 tZQCS; - u32 tZQCL; - u32 tZQINIT; - u8 tDQSCKMAXx2; - u8 tRASmax; - u8 tFAW; - -}; - -/* - * Min tCK values for some of the parameters: - * If the calculated clock cycles for the respective parameter is - * less than the corresponding min tCK value, we need to set the min - * tCK value. This may happen at lower frequencies. - */ -struct lpddr2_min_tck { - u32 tRL; - u32 tRP_AB; - u32 tRCD; - u32 tWR; - u32 tRAS_MIN; - u32 tRRD; - u32 tWTR; - u32 tXP; - u32 tRTP; - u8 tCKE; - u32 tCKESR; - u32 tFAW; -}; - -struct lpddr2_device_details { - u8 type; - u8 density; - u8 io_width; - u8 manufacturer; -}; - -struct lpddr2_device_timings { - const struct lpddr2_ac_timings **ac_timings; - const struct lpddr2_min_tck *min_tck; -}; - -/* Details of the devices connected to each chip-select of an EMIF instance */ -struct emif_device_details { - const struct lpddr2_device_details *cs0_device_details; - const struct lpddr2_device_details *cs1_device_details; - const struct lpddr2_device_timings *cs0_device_timings; - const struct lpddr2_device_timings *cs1_device_timings; -}; - -/* - * Structure containing shadow of important registers in EMIF - * The calculation function fills in this structure to be later used for - * initialization and DVFS - */ -struct emif_regs { - u32 freq; - u32 sdram_config_init; - u32 sdram_config; - u32 ref_ctrl; - u32 sdram_tim1; - u32 sdram_tim2; - u32 sdram_tim3; - u32 read_idle_ctrl; - u32 zq_config; - u32 temp_alert_config; - u32 emif_ddr_phy_ctlr_1_init; - u32 emif_ddr_phy_ctlr_1; -}; - -/* assert macros */ -#if defined(DEBUG) -#define emif_assert(c) ({ if (!(c)) for (;;); }) -#else -#define emif_assert(c) ({ if (0) hang(); }) -#endif - -#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs); -void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs); -#else -struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs, - struct lpddr2_device_details *lpddr2_dev_details); -void emif_get_device_timings(u32 emif_nr, - const struct lpddr2_device_timings **cs0_device_timings, - const struct lpddr2_device_timings **cs1_device_timings); -#endif - -#endif diff --git a/arch/arm/include/asm/arch-omap4/mmc_host_def.h b/arch/arm/include/asm/arch-omap4/mmc_host_def.h index 733d8ed34..74439c9d9 100644 --- a/arch/arm/include/asm/arch-omap4/mmc_host_def.h +++ b/arch/arm/include/asm/arch-omap4/mmc_host_def.h @@ -33,7 +33,7 @@ #define OMAP_HSMMC2_BASE 0x480B4100 #define OMAP_HSMMC3_BASE 0x480AD100 -typedef struct hsmmc { +struct hsmmc { unsigned char res1[0x10]; unsigned int sysconfig; /* 0x10 */ unsigned int sysstatus; /* 0x14 */ @@ -55,7 +55,7 @@ typedef struct hsmmc { unsigned int ie; /* 0x134 */ unsigned char res4[0x8]; unsigned int capa; /* 0x140 */ -} hsmmc_t; +}; /* * OMAP HS MMC Bit definitions @@ -160,13 +160,6 @@ typedef struct hsmmc { #define CLK_400KHZ 1 #define CLK_MISC 2 -typedef struct { - unsigned int card_type; - unsigned int version; - unsigned int mode; - unsigned int size; - unsigned int RCA; -} mmc_card_data; #define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) #define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) diff --git a/arch/arm/include/asm/arch-omap4/omap4.h b/arch/arm/include/asm/arch-omap4/omap.h index 61ebb3d46..e9942574f 100644 --- a/arch/arm/include/asm/arch-omap4/omap4.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -44,7 +44,8 @@ #define OMAP44XX_DRAM_ADDR_SPACE_START 0x80000000 #define OMAP44XX_DRAM_ADDR_SPACE_END 0xD0000000 - +#define DRAM_ADDR_SPACE_START OMAP44XX_DRAM_ADDR_SPACE_START +#define DRAM_ADDR_SPACE_END OMAP44XX_DRAM_ADDR_SPACE_END /* CONTROL */ #define CTRL_BASE (OMAP44XX_L4_CORE_BASE + 0x2000) @@ -57,16 +58,11 @@ /* CONTROL_ID_CODE */ #define CONTROL_ID_CODE 0x4A002204 -/* 4430 */ -#define OMAP4430_CONTROL_ID_CODE_ES1_0 0x0B85202F -#define OMAP4430_CONTROL_ID_CODE_ES2_0 0x1B85202F -#define OMAP4430_CONTROL_ID_CODE_ES2_1 0x3B95C02F -#define OMAP4430_CONTROL_ID_CODE_ES2_2 0x4B95C02F -#define OMAP4430_CONTROL_ID_CODE_ES2_3 0x6B95C02F - -/* 4460 */ -#define OMAP4460_CONTROL_ID_CODE_ES1_0 0x0B94E02F -#define OMAP4460_CONTROL_ID_CODE_ES1_1 0x2B94E02F +#define OMAP4_CONTROL_ID_CODE_ES1_0 0x0B85202F +#define OMAP4_CONTROL_ID_CODE_ES2_0 0x1B85202F +#define OMAP4_CONTROL_ID_CODE_ES2_1 0x3B95C02F +#define OMAP4_CONTROL_ID_CODE_ES2_2 0x4B95C02F +#define OMAP4_CONTROL_ID_CODE_ES2_3 0x6B95C02F /* UART */ #define UART1_BASE (OMAP44XX_L4_PER_BASE + 0x6a000) @@ -151,7 +147,7 @@ struct omap4_sys_ctrl_regs { unsigned int control_ldosram_mpu_voltage_ctrl; /* 0x4A002324 */ unsigned int control_ldosram_core_voltage_ctrl; /* 0x4A002328 */ unsigned int pad3[260277]; - unsigned int control_pbiaslite; /* 0x4A100600 */ + unsigned int control_pbiaslite; /* 0x4A100600 */ unsigned int pad4[63]; unsigned int control_efuse_1; /* 0x4A100700 */ unsigned int control_efuse_2; /* 0x4A100704 */ @@ -188,16 +184,6 @@ struct control_lpddr2io_regs { #define OMAP4_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10) #define OMAP4_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x14) -/* Silicon revisions */ -#define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF -#define OMAP4430_ES1_0 0x44300100 -#define OMAP4430_ES2_0 0x44300200 -#define OMAP4430_ES2_1 0x44300210 -#define OMAP4430_ES2_2 0x44300220 -#define OMAP4430_ES2_3 0x44300230 -#define OMAP4460_ES1_0 0x44600100 -#define OMAP4460_ES1_1 0x44600110 - /* ROM code defines */ /* Boot device */ #define BOOT_DEVICE_MASK 0xFF @@ -205,5 +191,21 @@ struct control_lpddr2io_regs { #define DEV_DESC_PTR_OFFSET 0x4 #define DEV_DATA_PTR_OFFSET 0x18 #define BOOT_MODE_OFFSET 0x8 +#define RESET_REASON_OFFSET 0x9 +#define CH_FLAGS_OFFSET 0xA + +#define CH_FLAGS_CHSETTINGS (0x1 << 0) +#define CH_FLAGS_CHRAM (0x1 << 1) +#define CH_FLAGS_CHFLASH (0x1 << 2) +#define CH_FLAGS_CHMMCSD (0x1 << 3) +#ifndef __ASSEMBLY__ +struct omap_boot_parameters { + char *boot_message; + unsigned int mem_boot_descriptor; + unsigned char omap_bootdevice; + unsigned char reset_reason; + unsigned char ch_flags; +}; +#endif #endif diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h index 1aacbb12e..4146e2181 100644 --- a/arch/arm/include/asm/arch-omap4/sys_proto.h +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -21,7 +21,7 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ -#include <asm/arch/omap4.h> +#include <asm/arch/omap.h> #include <asm/arch/clocks.h> #include <asm/io.h> #include <asm/omap_common.h> @@ -32,17 +32,17 @@ struct omap_sysinfo { }; extern const struct omap_sysinfo sysinfo; -extern struct omap4_prcm_regs *const prcm; - void gpmc_init(void); void watchdog_init(void); u32 get_device_type(void); void do_set_mux(u32 base, struct pad_conf_entry const *array, int size); +void set_muxconf_regs_essential(void); void set_muxconf_regs_non_essential(void); void sr32(void *, u32, u32, u32); u32 wait_on_value(u32, u32, void *, u32); void sdelay(unsigned long); void set_pl310_ctrl_reg(u32 val); +void omap_rev_string(char *omap_rev_string); void setup_clocks_for_console(void); void prcm_init(void); void bypass_dpll(u32 *const base); @@ -51,7 +51,17 @@ u32 get_sys_clk_freq(void); u32 omap4_ddr_clk(void); void cancel_out(u32 *num, u32 *den, u32 den_limit); void sdram_init(void); -u32 omap4_sdram_size(void); +u32 omap_sdram_size(void); +u32 cortex_rev(void); +void init_omap_revision(void); +void do_io_settings(void); +/* + * This is used to verify if the configuration header + * was executed by Romcode prior to control of transfer + * to the bootloader. SPL is responsible for saving and + * passing this to the u-boot. + */ +extern struct omap_boot_parameters boot_params; static inline u32 running_from_sdram(void) { @@ -64,15 +74,17 @@ static inline u32 running_from_sdram(void) static inline u8 uboot_loaded_by_spl(void) { /* - * Configuration Header is not supported yet, so u-boot init running - * from SDRAM implies that it was loaded by SPL. When this situation - * changes one of these approaches could be taken: - * i. Pass a magic from SPL to U-Boot and U-Boot save it at a known - * location. - * ii. Check the OPP. CH can support only 50% OPP while SPL initializes - * the DPLLs at 100% OPP. + * u-boot can be running from sdram either because of configuration + * Header or by SPL. If because of CH, then the romcode sets the + * CHSETTINGS executed bit to true in the boot parameter structure that + * it passes to the bootloader.This parameter is stored in the ch_flags + * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a + * mandatory section if CH is present. */ - return running_from_sdram(); + if ((boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS)) + return 0; + else + return running_from_sdram(); } /* * The basic hardware init of OMAP(s_init()) can happen in 4 @@ -86,7 +98,7 @@ static inline u8 uboot_loaded_by_spl(void) * This function finds this context. * Defining as inline may help in compiling out unused functions in SPL */ -static inline u32 omap4_hw_init_context(void) +static inline u32 omap_hw_init_context(void) { #ifdef CONFIG_SPL_BUILD return OMAP_INIT_CONTEXT_SPL; diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h new file mode 100644 index 000000000..fa99f654b --- /dev/null +++ b/arch/arm/include/asm/arch-omap5/clocks.h @@ -0,0 +1,722 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Aneesh V <aneesh@ti.com> + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _CLOCKS_OMAP5_H_ +#define _CLOCKS_OMAP5_H_ +#include <common.h> + +/* + * Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per + * loop, allow for a minimum of 2 ms wait (in reality the wait will be + * much more than that) + */ +#define LDELAY 1000000 + +#define CM_CLKMODE_DPLL_CORE (OMAP54XX_L4_CORE_BASE + 0x4120) +#define CM_CLKMODE_DPLL_PER (OMAP54XX_L4_CORE_BASE + 0x8140) +#define CM_CLKMODE_DPLL_MPU (OMAP54XX_L4_CORE_BASE + 0x4160) +#define CM_CLKSEL_CORE (OMAP54XX_L4_CORE_BASE + 0x4100) + +struct omap5_prcm_regs { + /* cm1.ckgen */ + u32 cm_clksel_core; /* 4a004100 */ + u32 pad001[1]; /* 4a004104 */ + u32 cm_clksel_abe; /* 4a004108 */ + u32 pad002[1]; /* 4a00410c */ + u32 cm_dll_ctrl; /* 4a004110 */ + u32 pad003[3]; /* 4a004114 */ + u32 cm_clkmode_dpll_core; /* 4a004120 */ + u32 cm_idlest_dpll_core; /* 4a004124 */ + u32 cm_autoidle_dpll_core; /* 4a004128 */ + u32 cm_clksel_dpll_core; /* 4a00412c */ + u32 cm_div_m2_dpll_core; /* 4a004130 */ + u32 cm_div_m3_dpll_core; /* 4a004134 */ + u32 cm_div_h11_dpll_core; /* 4a004138 */ + u32 cm_div_h12_dpll_core; /* 4a00413c */ + u32 cm_div_h13_dpll_core; /* 4a004140 */ + u32 cm_div_h14_dpll_core; /* 4a004144 */ + u32 cm_ssc_deltamstep_dpll_core; /* 4a004148 */ + u32 cm_ssc_modfreqdiv_dpll_core; /* 4a00414c */ + u32 cm_emu_override_dpll_core; /* 4a004150 */ + + u32 cm_div_h22_dpllcore; /* 4a004154 */ + u32 cm_div_h23_dpll_core; /* 4a004158 */ + u32 pad0041[1]; /* 4a00415c */ + u32 cm_clkmode_dpll_mpu; /* 4a004160 */ + u32 cm_idlest_dpll_mpu; /* 4a004164 */ + u32 cm_autoidle_dpll_mpu; /* 4a004168 */ + u32 cm_clksel_dpll_mpu; /* 4a00416c */ + u32 cm_div_m2_dpll_mpu; /* 4a004170 */ + u32 pad005[5]; /* 4a004174 */ + u32 cm_ssc_deltamstep_dpll_mpu; /* 4a004188 */ + u32 cm_ssc_modfreqdiv_dpll_mpu; /* 4a00418c */ + u32 pad006[3]; /* 4a004190 */ + u32 cm_bypclk_dpll_mpu; /* 4a00419c */ + u32 cm_clkmode_dpll_iva; /* 4a0041a0 */ + u32 cm_idlest_dpll_iva; /* 4a0041a4 */ + u32 cm_autoidle_dpll_iva; /* 4a0041a8 */ + u32 cm_clksel_dpll_iva; /* 4a0041ac */ + u32 pad007[2]; /* 4a0041b0 */ + u32 cm_div_h11_dpll_iva; /* 4a0041b8 */ + u32 cm_div_h12_dpll_iva; /* 4a0041bc */ + u32 pad008[2]; /* 4a0041c0 */ + u32 cm_ssc_deltamstep_dpll_iva; /* 4a0041c8 */ + u32 cm_ssc_modfreqdiv_dpll_iva; /* 4a0041cc */ + u32 pad009[3]; /* 4a0041d0 */ + u32 cm_bypclk_dpll_iva; /* 4a0041dc */ + u32 cm_clkmode_dpll_abe; /* 4a0041e0 */ + u32 cm_idlest_dpll_abe; /* 4a0041e4 */ + u32 cm_autoidle_dpll_abe; /* 4a0041e8 */ + u32 cm_clksel_dpll_abe; /* 4a0041ec */ + u32 cm_div_m2_dpll_abe; /* 4a0041f0 */ + u32 cm_div_m3_dpll_abe; /* 4a0041f4 */ + u32 pad010[4]; /* 4a0041f8 */ + u32 cm_ssc_deltamstep_dpll_abe; /* 4a004208 */ + u32 cm_ssc_modfreqdiv_dpll_abe; /* 4a00420c */ + u32 pad011[4]; /* 4a004210 */ + u32 cm_clkmode_dpll_ddrphy; /* 4a004220 */ + u32 cm_idlest_dpll_ddrphy; /* 4a004224 */ + u32 cm_autoidle_dpll_ddrphy; /* 4a004228 */ + u32 cm_clksel_dpll_ddrphy; /* 4a00422c */ + u32 cm_div_m2_dpll_ddrphy; /* 4a004230 */ + u32 pad012[1]; /* 4a004234 */ + u32 cm_div_h11_dpll_ddrphy; /* 4a004238 */ + u32 cm_div_h12_dpll_ddrphy; /* 4a00423c */ + u32 cm_div_h13_dpll_ddrphy; /* 4a004240 */ + u32 pad013[1]; /* 4a004244 */ + u32 cm_ssc_deltamstep_dpll_ddrphy; /* 4a004248 */ + u32 pad014[5]; /* 4a00424c */ + u32 cm_shadow_freq_config1; /* 4a004260 */ + u32 pad0141[47]; /* 4a004264 */ + u32 cm_mpu_mpu_clkctrl; /* 4a004320 */ + + + /* cm1.dsp */ + u32 pad015[55]; /* 4a004324 */ + u32 cm_dsp_clkstctrl; /* 4a004400 */ + u32 pad016[7]; /* 4a004404 */ + u32 cm_dsp_dsp_clkctrl; /* 4a004420 */ + + /* cm1.abe */ + u32 pad017[55]; /* 4a004424 */ + u32 cm1_abe_clkstctrl; /* 4a004500 */ + u32 pad018[7]; /* 4a004504 */ + u32 cm1_abe_l4abe_clkctrl; /* 4a004520 */ + u32 pad019[1]; /* 4a004524 */ + u32 cm1_abe_aess_clkctrl; /* 4a004528 */ + u32 pad020[1]; /* 4a00452c */ + u32 cm1_abe_pdm_clkctrl; /* 4a004530 */ + u32 pad021[1]; /* 4a004534 */ + u32 cm1_abe_dmic_clkctrl; /* 4a004538 */ + u32 pad022[1]; /* 4a00453c */ + u32 cm1_abe_mcasp_clkctrl; /* 4a004540 */ + u32 pad023[1]; /* 4a004544 */ + u32 cm1_abe_mcbsp1_clkctrl; /* 4a004548 */ + u32 pad024[1]; /* 4a00454c */ + u32 cm1_abe_mcbsp2_clkctrl; /* 4a004550 */ + u32 pad025[1]; /* 4a004554 */ + u32 cm1_abe_mcbsp3_clkctrl; /* 4a004558 */ + u32 pad026[1]; /* 4a00455c */ + u32 cm1_abe_slimbus_clkctrl; /* 4a004560 */ + u32 pad027[1]; /* 4a004564 */ + u32 cm1_abe_timer5_clkctrl; /* 4a004568 */ + u32 pad028[1]; /* 4a00456c */ + u32 cm1_abe_timer6_clkctrl; /* 4a004570 */ + u32 pad029[1]; /* 4a004574 */ + u32 cm1_abe_timer7_clkctrl; /* 4a004578 */ + u32 pad030[1]; /* 4a00457c */ + u32 cm1_abe_timer8_clkctrl; /* 4a004580 */ + u32 pad031[1]; /* 4a004584 */ + u32 cm1_abe_wdt3_clkctrl; /* 4a004588 */ + + /* cm2.ckgen */ + u32 pad032[3805]; /* 4a00458c */ + u32 cm_clksel_mpu_m3_iss_root; /* 4a008100 */ + u32 cm_clksel_usb_60mhz; /* 4a008104 */ + u32 cm_scale_fclk; /* 4a008108 */ + u32 pad033[1]; /* 4a00810c */ + u32 cm_core_dvfs_perf1; /* 4a008110 */ + u32 cm_core_dvfs_perf2; /* 4a008114 */ + u32 cm_core_dvfs_perf3; /* 4a008118 */ + u32 cm_core_dvfs_perf4; /* 4a00811c */ + u32 pad034[1]; /* 4a008120 */ + u32 cm_core_dvfs_current; /* 4a008124 */ + u32 cm_iva_dvfs_perf_tesla; /* 4a008128 */ + u32 cm_iva_dvfs_perf_ivahd; /* 4a00812c */ + u32 cm_iva_dvfs_perf_abe; /* 4a008130 */ + u32 pad035[1]; /* 4a008134 */ + u32 cm_iva_dvfs_current; /* 4a008138 */ + u32 pad036[1]; /* 4a00813c */ + u32 cm_clkmode_dpll_per; /* 4a008140 */ + u32 cm_idlest_dpll_per; /* 4a008144 */ + u32 cm_autoidle_dpll_per; /* 4a008148 */ + u32 cm_clksel_dpll_per; /* 4a00814c */ + u32 cm_div_m2_dpll_per; /* 4a008150 */ + u32 cm_div_m3_dpll_per; /* 4a008154 */ + u32 cm_div_h11_dpll_per; /* 4a008158 */ + u32 cm_div_h12_dpll_per; /* 4a00815c */ + u32 pad0361[1]; /* 4a008160 */ + u32 cm_div_h14_dpll_per; /* 4a008164 */ + u32 cm_ssc_deltamstep_dpll_per; /* 4a008168 */ + u32 cm_ssc_modfreqdiv_dpll_per; /* 4a00816c */ + u32 cm_emu_override_dpll_per; /* 4a008170 */ + u32 pad037[3]; /* 4a008174 */ + u32 cm_clkmode_dpll_usb; /* 4a008180 */ + u32 cm_idlest_dpll_usb; /* 4a008184 */ + u32 cm_autoidle_dpll_usb; /* 4a008188 */ + u32 cm_clksel_dpll_usb; /* 4a00818c */ + u32 cm_div_m2_dpll_usb; /* 4a008190 */ + u32 pad038[5]; /* 4a008194 */ + u32 cm_ssc_deltamstep_dpll_usb; /* 4a0081a8 */ + u32 cm_ssc_modfreqdiv_dpll_usb; /* 4a0081ac */ + u32 pad039[1]; /* 4a0081b0 */ + u32 cm_clkdcoldo_dpll_usb; /* 4a0081b4 */ + u32 pad040[2]; /* 4a0081b8 */ + u32 cm_clkmode_dpll_unipro; /* 4a0081c0 */ + u32 cm_idlest_dpll_unipro; /* 4a0081c4 */ + u32 cm_autoidle_dpll_unipro; /* 4a0081c8 */ + u32 cm_clksel_dpll_unipro; /* 4a0081cc */ + u32 cm_div_m2_dpll_unipro; /* 4a0081d0 */ + u32 pad041[5]; /* 4a0081d4 */ + u32 cm_ssc_deltamstep_dpll_unipro; /* 4a0081e8 */ + u32 cm_ssc_modfreqdiv_dpll_unipro; /* 4a0081ec */ + + /* cm2.core */ + u32 pad0411[324]; /* 4a0081f0 */ + u32 cm_l3_1_clkstctrl; /* 4a008700 */ + u32 pad042[1]; /* 4a008704 */ + u32 cm_l3_1_dynamicdep; /* 4a008708 */ + u32 pad043[5]; /* 4a00870c */ + u32 cm_l3_1_l3_1_clkctrl; /* 4a008720 */ + u32 pad044[55]; /* 4a008724 */ + u32 cm_l3_2_clkstctrl; /* 4a008800 */ + u32 pad045[1]; /* 4a008804 */ + u32 cm_l3_2_dynamicdep; /* 4a008808 */ + u32 pad046[5]; /* 4a00880c */ + u32 cm_l3_2_l3_2_clkctrl; /* 4a008820 */ + u32 pad047[1]; /* 4a008824 */ + u32 cm_l3_2_gpmc_clkctrl; /* 4a008828 */ + u32 pad048[1]; /* 4a00882c */ + u32 cm_l3_2_ocmc_ram_clkctrl; /* 4a008830 */ + u32 pad049[51]; /* 4a008834 */ + u32 cm_mpu_m3_clkstctrl; /* 4a008900 */ + u32 cm_mpu_m3_staticdep; /* 4a008904 */ + u32 cm_mpu_m3_dynamicdep; /* 4a008908 */ + u32 pad050[5]; /* 4a00890c */ + u32 cm_mpu_m3_mpu_m3_clkctrl; /* 4a008920 */ + u32 pad051[55]; /* 4a008924 */ + u32 cm_sdma_clkstctrl; /* 4a008a00 */ + u32 cm_sdma_staticdep; /* 4a008a04 */ + u32 cm_sdma_dynamicdep; /* 4a008a08 */ + u32 pad052[5]; /* 4a008a0c */ + u32 cm_sdma_sdma_clkctrl; /* 4a008a20 */ + u32 pad053[55]; /* 4a008a24 */ + u32 cm_memif_clkstctrl; /* 4a008b00 */ + u32 pad054[7]; /* 4a008b04 */ + u32 cm_memif_dmm_clkctrl; /* 4a008b20 */ + u32 pad055[1]; /* 4a008b24 */ + u32 cm_memif_emif_fw_clkctrl; /* 4a008b28 */ + u32 pad056[1]; /* 4a008b2c */ + u32 cm_memif_emif_1_clkctrl; /* 4a008b30 */ + u32 pad057[1]; /* 4a008b34 */ + u32 cm_memif_emif_2_clkctrl; /* 4a008b38 */ + u32 pad058[1]; /* 4a008b3c */ + u32 cm_memif_dll_clkctrl; /* 4a008b40 */ + u32 pad059[3]; /* 4a008b44 */ + u32 cm_memif_emif_h1_clkctrl; /* 4a008b50 */ + u32 pad060[1]; /* 4a008b54 */ + u32 cm_memif_emif_h2_clkctrl; /* 4a008b58 */ + u32 pad061[1]; /* 4a008b5c */ + u32 cm_memif_dll_h_clkctrl; /* 4a008b60 */ + u32 pad062[39]; /* 4a008b64 */ + u32 cm_c2c_clkstctrl; /* 4a008c00 */ + u32 cm_c2c_staticdep; /* 4a008c04 */ + u32 cm_c2c_dynamicdep; /* 4a008c08 */ + u32 pad063[5]; /* 4a008c0c */ + u32 cm_c2c_sad2d_clkctrl; /* 4a008c20 */ + u32 pad064[1]; /* 4a008c24 */ + u32 cm_c2c_modem_icr_clkctrl; /* 4a008c28 */ + u32 pad065[1]; /* 4a008c2c */ + u32 cm_c2c_sad2d_fw_clkctrl; /* 4a008c30 */ + u32 pad066[51]; /* 4a008c34 */ + u32 cm_l4cfg_clkstctrl; /* 4a008d00 */ + u32 pad067[1]; /* 4a008d04 */ + u32 cm_l4cfg_dynamicdep; /* 4a008d08 */ + u32 pad068[5]; /* 4a008d0c */ + u32 cm_l4cfg_l4_cfg_clkctrl; /* 4a008d20 */ + u32 pad069[1]; /* 4a008d24 */ + u32 cm_l4cfg_hw_sem_clkctrl; /* 4a008d28 */ + u32 pad070[1]; /* 4a008d2c */ + u32 cm_l4cfg_mailbox_clkctrl; /* 4a008d30 */ + u32 pad071[1]; /* 4a008d34 */ + u32 cm_l4cfg_sar_rom_clkctrl; /* 4a008d38 */ + u32 pad072[49]; /* 4a008d3c */ + u32 cm_l3instr_clkstctrl; /* 4a008e00 */ + u32 pad073[7]; /* 4a008e04 */ + u32 cm_l3instr_l3_3_clkctrl; /* 4a008e20 */ + u32 pad074[1]; /* 4a008e24 */ + u32 cm_l3instr_l3_instr_clkctrl; /* 4a008e28 */ + u32 pad075[5]; /* 4a008e2c */ + u32 cm_l3instr_intrconn_wp1_clkctrl; /* 4a008e40 */ + + + /* cm2.ivahd */ + u32 pad076[47]; /* 4a008e44 */ + u32 cm_ivahd_clkstctrl; /* 4a008f00 */ + u32 pad077[7]; /* 4a008f04 */ + u32 cm_ivahd_ivahd_clkctrl; /* 4a008f20 */ + u32 pad078[1]; /* 4a008f24 */ + u32 cm_ivahd_sl2_clkctrl; /* 4a008f28 */ + + /* cm2.cam */ + u32 pad079[53]; /* 4a008f2c */ + u32 cm_cam_clkstctrl; /* 4a009000 */ + u32 pad080[7]; /* 4a009004 */ + u32 cm_cam_iss_clkctrl; /* 4a009020 */ + u32 pad081[1]; /* 4a009024 */ + u32 cm_cam_fdif_clkctrl; /* 4a009028 */ + + /* cm2.dss */ + u32 pad082[53]; /* 4a00902c */ + u32 cm_dss_clkstctrl; /* 4a009100 */ + u32 pad083[7]; /* 4a009104 */ + u32 cm_dss_dss_clkctrl; /* 4a009120 */ + + /* cm2.sgx */ + u32 pad084[55]; /* 4a009124 */ + u32 cm_sgx_clkstctrl; /* 4a009200 */ + u32 pad085[7]; /* 4a009204 */ + u32 cm_sgx_sgx_clkctrl; /* 4a009220 */ + + /* cm2.l3init */ + u32 pad086[55]; /* 4a009224 */ + u32 cm_l3init_clkstctrl; /* 4a009300 */ + + /* cm2.l3init */ + u32 pad087[9]; /* 4a009304 */ + u32 cm_l3init_hsmmc1_clkctrl; /* 4a009328 */ + u32 pad088[1]; /* 4a00932c */ + u32 cm_l3init_hsmmc2_clkctrl; /* 4a009330 */ + u32 pad089[1]; /* 4a009334 */ + u32 cm_l3init_hsi_clkctrl; /* 4a009338 */ + u32 pad090[7]; /* 4a00933c */ + u32 cm_l3init_hsusbhost_clkctrl; /* 4a009358 */ + u32 pad091[1]; /* 4a00935c */ + u32 cm_l3init_hsusbotg_clkctrl; /* 4a009360 */ + u32 pad092[1]; /* 4a009364 */ + u32 cm_l3init_hsusbtll_clkctrl; /* 4a009368 */ + u32 pad093[3]; /* 4a00936c */ + u32 cm_l3init_p1500_clkctrl; /* 4a009378 */ + u32 pad094[21]; /* 4a00937c */ + u32 cm_l3init_fsusb_clkctrl; /* 4a0093d0 */ + u32 pad095[3]; /* 4a0093d4 */ + u32 cm_l3init_ocp2scp1_clkctrl; + + /* cm2.l4per */ + u32 pad096[7]; /* 4a0093e4 */ + u32 cm_l4per_clkstctrl; /* 4a009400 */ + u32 pad097[1]; /* 4a009404 */ + u32 cm_l4per_dynamicdep; /* 4a009408 */ + u32 pad098[5]; /* 4a00940c */ + u32 cm_l4per_adc_clkctrl; /* 4a009420 */ + u32 pad100[1]; /* 4a009424 */ + u32 cm_l4per_gptimer10_clkctrl; /* 4a009428 */ + u32 pad101[1]; /* 4a00942c */ + u32 cm_l4per_gptimer11_clkctrl; /* 4a009430 */ + u32 pad102[1]; /* 4a009434 */ + u32 cm_l4per_gptimer2_clkctrl; /* 4a009438 */ + u32 pad103[1]; /* 4a00943c */ + u32 cm_l4per_gptimer3_clkctrl; /* 4a009440 */ + u32 pad104[1]; /* 4a009444 */ + u32 cm_l4per_gptimer4_clkctrl; /* 4a009448 */ + u32 pad105[1]; /* 4a00944c */ + u32 cm_l4per_gptimer9_clkctrl; /* 4a009450 */ + u32 pad106[1]; /* 4a009454 */ + u32 cm_l4per_elm_clkctrl; /* 4a009458 */ + u32 pad107[1]; /* 4a00945c */ + u32 cm_l4per_gpio2_clkctrl; /* 4a009460 */ + u32 pad108[1]; /* 4a009464 */ + u32 cm_l4per_gpio3_clkctrl; /* 4a009468 */ + u32 pad109[1]; /* 4a00946c */ + u32 cm_l4per_gpio4_clkctrl; /* 4a009470 */ + u32 pad110[1]; /* 4a009474 */ + u32 cm_l4per_gpio5_clkctrl; /* 4a009478 */ + u32 pad111[1]; /* 4a00947c */ + u32 cm_l4per_gpio6_clkctrl; /* 4a009480 */ + u32 pad112[1]; /* 4a009484 */ + u32 cm_l4per_hdq1w_clkctrl; /* 4a009488 */ + u32 pad113[1]; /* 4a00948c */ + u32 cm_l4per_hecc1_clkctrl; /* 4a009490 */ + u32 pad114[1]; /* 4a009494 */ + u32 cm_l4per_hecc2_clkctrl; /* 4a009498 */ + u32 pad115[1]; /* 4a00949c */ + u32 cm_l4per_i2c1_clkctrl; /* 4a0094a0 */ + u32 pad116[1]; /* 4a0094a4 */ + u32 cm_l4per_i2c2_clkctrl; /* 4a0094a8 */ + u32 pad117[1]; /* 4a0094ac */ + u32 cm_l4per_i2c3_clkctrl; /* 4a0094b0 */ + u32 pad118[1]; /* 4a0094b4 */ + u32 cm_l4per_i2c4_clkctrl; /* 4a0094b8 */ + u32 pad119[1]; /* 4a0094bc */ + u32 cm_l4per_l4per_clkctrl; /* 4a0094c0 */ + u32 pad1191[3]; /* 4a0094c4 */ + u32 cm_l4per_mcasp2_clkctrl; /* 4a0094d0 */ + u32 pad120[1]; /* 4a0094d4 */ + u32 cm_l4per_mcasp3_clkctrl; /* 4a0094d8 */ + u32 pad121[3]; /* 4a0094dc */ + u32 cm_l4per_mgate_clkctrl; /* 4a0094e8 */ + u32 pad123[1]; /* 4a0094ec */ + u32 cm_l4per_mcspi1_clkctrl; /* 4a0094f0 */ + u32 pad124[1]; /* 4a0094f4 */ + u32 cm_l4per_mcspi2_clkctrl; /* 4a0094f8 */ + u32 pad125[1]; /* 4a0094fc */ + u32 cm_l4per_mcspi3_clkctrl; /* 4a009500 */ + u32 pad126[1]; /* 4a009504 */ + u32 cm_l4per_mcspi4_clkctrl; /* 4a009508 */ + u32 pad127[1]; /* 4a00950c */ + u32 cm_l4per_gpio7_clkctrl; /* 4a009510 */ + u32 pad1271[1]; /* 4a009514 */ + u32 cm_l4per_gpio8_clkctrl; /* 4a009518 */ + u32 pad1272[1]; /* 4a00951c */ + u32 cm_l4per_mmcsd3_clkctrl; /* 4a009520 */ + u32 pad128[1]; /* 4a009524 */ + u32 cm_l4per_mmcsd4_clkctrl; /* 4a009528 */ + u32 pad129[1]; /* 4a00952c */ + u32 cm_l4per_msprohg_clkctrl; /* 4a009530 */ + u32 pad130[1]; /* 4a009534 */ + u32 cm_l4per_slimbus2_clkctrl; /* 4a009538 */ + u32 pad131[1]; /* 4a00953c */ + u32 cm_l4per_uart1_clkctrl; /* 4a009540 */ + u32 pad132[1]; /* 4a009544 */ + u32 cm_l4per_uart2_clkctrl; /* 4a009548 */ + u32 pad133[1]; /* 4a00954c */ + u32 cm_l4per_uart3_clkctrl; /* 4a009550 */ + u32 pad134[1]; /* 4a009554 */ + u32 cm_l4per_uart4_clkctrl; /* 4a009558 */ + u32 pad135[1]; /* 4a00955c */ + u32 cm_l4per_mmcsd5_clkctrl; /* 4a009560 */ + u32 pad136[1]; /* 4a009564 */ + u32 cm_l4per_i2c5_clkctrl; /* 4a009568 */ + u32 pad1371[1]; /* 4a00956c */ + u32 cm_l4per_uart5_clkctrl; /* 4a009570 */ + u32 pad1372[1]; /* 4a009574 */ + u32 cm_l4per_uart6_clkctrl; /* 4a009578 */ + u32 pad1374[1]; /* 4a00957c */ + u32 cm_l4sec_clkstctrl; /* 4a009580 */ + u32 cm_l4sec_staticdep; /* 4a009584 */ + u32 cm_l4sec_dynamicdep; /* 4a009588 */ + u32 pad138[5]; /* 4a00958c */ + u32 cm_l4sec_aes1_clkctrl; /* 4a0095a0 */ + u32 pad139[1]; /* 4a0095a4 */ + u32 cm_l4sec_aes2_clkctrl; /* 4a0095a8 */ + u32 pad140[1]; /* 4a0095ac */ + u32 cm_l4sec_des3des_clkctrl; /* 4a0095b0 */ + u32 pad141[1]; /* 4a0095b4 */ + u32 cm_l4sec_pkaeip29_clkctrl; /* 4a0095b8 */ + u32 pad142[1]; /* 4a0095bc */ + u32 cm_l4sec_rng_clkctrl; /* 4a0095c0 */ + u32 pad143[1]; /* 4a0095c4 */ + u32 cm_l4sec_sha2md51_clkctrl; /* 4a0095c8 */ + u32 pad144[3]; /* 4a0095cc */ + u32 cm_l4sec_cryptodma_clkctrl; /* 4a0095d8 */ + u32 pad145[3660425]; /* 4a0095dc */ + + /* l4 wkup regs */ + u32 pad201[6211]; /* 4ae00000 */ + u32 cm_abe_pll_ref_clksel; /* 4ae0610c */ + u32 cm_sys_clksel; /* 4ae06110 */ + u32 pad202[1467]; /* 4ae06114 */ + u32 cm_wkup_clkstctrl; /* 4ae07800 */ + u32 pad203[7]; /* 4ae07804 */ + u32 cm_wkup_l4wkup_clkctrl; /* 4ae07820 */ + u32 pad204; /* 4ae07824 */ + u32 cm_wkup_wdtimer1_clkctrl; /* 4ae07828 */ + u32 pad205; /* 4ae0782c */ + u32 cm_wkup_wdtimer2_clkctrl; /* 4ae07830 */ + u32 pad206; /* 4ae07834 */ + u32 cm_wkup_gpio1_clkctrl; /* 4ae07838 */ + u32 pad207; /* 4ae0783c */ + u32 cm_wkup_gptimer1_clkctrl; /* 4ae07840 */ + u32 pad208; /* 4ae07844 */ + u32 cm_wkup_gptimer12_clkctrl; /* 4ae07848 */ + u32 pad209; /* 4ae0784c */ + u32 cm_wkup_synctimer_clkctrl; /* 4ae07850 */ + u32 pad210; /* 4ae07854 */ + u32 cm_wkup_usim_clkctrl; /* 4ae07858 */ + u32 pad211; /* 4ae0785c */ + u32 cm_wkup_sarram_clkctrl; /* 4ae07860 */ + u32 pad212[5]; /* 4ae07864 */ + u32 cm_wkup_keyboard_clkctrl; /* 4ae07878 */ + u32 pad213; /* 4ae0787c */ + u32 cm_wkup_rtc_clkctrl; /* 4ae07880 */ + u32 pad214; /* 4ae07884 */ + u32 cm_wkup_bandgap_clkctrl; /* 4ae07888 */ + u32 pad215[197]; /* 4ae0788c */ + u32 prm_vc_val_bypass; /* 4ae07ba0 */ + u32 pad216[4]; + u32 prm_vc_cfg_i2c_mode; /* 4ae07bb4 */ + u32 prm_vc_cfg_i2c_clk; /* 4ae07bb8 */ +}; + +/* DPLL register offsets */ +#define CM_CLKMODE_DPLL 0 +#define CM_IDLEST_DPLL 0x4 +#define CM_AUTOIDLE_DPLL 0x8 +#define CM_CLKSEL_DPLL 0xC + +#define DPLL_CLKOUT_DIV_MASK 0x1F /* post-divider mask */ + +/* CM_CLKMODE_DPLL */ +#define CM_CLKMODE_DPLL_REGM4XEN_SHIFT 11 +#define CM_CLKMODE_DPLL_REGM4XEN_MASK (1 << 11) +#define CM_CLKMODE_DPLL_LPMODE_EN_SHIFT 10 +#define CM_CLKMODE_DPLL_LPMODE_EN_MASK (1 << 10) +#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_SHIFT 9 +#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK (1 << 9) +#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_SHIFT 8 +#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK (1 << 8) +#define CM_CLKMODE_DPLL_RAMP_RATE_SHIFT 5 +#define CM_CLKMODE_DPLL_RAMP_RATE_MASK (0x7 << 5) +#define CM_CLKMODE_DPLL_EN_SHIFT 0 +#define CM_CLKMODE_DPLL_EN_MASK (0x7 << 0) + +#define CM_CLKMODE_DPLL_DPLL_EN_SHIFT 0 +#define CM_CLKMODE_DPLL_DPLL_EN_MASK 7 + +#define DPLL_EN_STOP 1 +#define DPLL_EN_MN_BYPASS 4 +#define DPLL_EN_LOW_POWER_BYPASS 5 +#define DPLL_EN_FAST_RELOCK_BYPASS 6 +#define DPLL_EN_LOCK 7 + +/* CM_IDLEST_DPLL fields */ +#define ST_DPLL_CLK_MASK 1 + +/* CM_CLKSEL_DPLL */ +#define CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT 24 +#define CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK (0xFF << 24) +#define CM_CLKSEL_DPLL_M_SHIFT 8 +#define CM_CLKSEL_DPLL_M_MASK (0x7FF << 8) +#define CM_CLKSEL_DPLL_N_SHIFT 0 +#define CM_CLKSEL_DPLL_N_MASK 0x7F +#define CM_CLKSEL_DCC_EN_SHIFT 22 +#define CM_CLKSEL_DCC_EN_MASK (1 << 22) + +#define OMAP4_DPLL_MAX_N 127 + +/* CM_SYS_CLKSEL */ +#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7 + +/* CM_CLKSEL_CORE */ +#define CLKSEL_CORE_SHIFT 0 +#define CLKSEL_L3_SHIFT 4 +#define CLKSEL_L4_SHIFT 8 + +#define CLKSEL_CORE_X2_DIV_1 0 +#define CLKSEL_L3_CORE_DIV_2 1 +#define CLKSEL_L4_L3_DIV_2 1 + +/* CM_ABE_PLL_REF_CLKSEL */ +#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT 0 +#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK 1 +#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK 0 +#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK 1 + +/* CM_BYPCLK_DPLL_IVA */ +#define CM_BYPCLK_DPLL_IVA_CLKSEL_SHIFT 0 +#define CM_BYPCLK_DPLL_IVA_CLKSEL_MASK 3 + +#define DPLL_IVA_CLKSEL_CORE_X2_DIV_2 1 + +/* CM_SHADOW_FREQ_CONFIG1 */ +#define SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK 1 +#define SHADOW_FREQ_CONFIG1_DLL_OVERRIDE_MASK 4 +#define SHADOW_FREQ_CONFIG1_DLL_RESET_MASK 8 + +#define SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT 8 +#define SHADOW_FREQ_CONFIG1_DPLL_EN_MASK (7 << 8) + +#define SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT 11 +#define SHADOW_FREQ_CONFIG1_M2_DIV_MASK (0x1F << 11) + +/*CM_<clock_domain>__CLKCTRL */ +#define CD_CLKCTRL_CLKTRCTRL_SHIFT 0 +#define CD_CLKCTRL_CLKTRCTRL_MASK 3 + +#define CD_CLKCTRL_CLKTRCTRL_NO_SLEEP 0 +#define CD_CLKCTRL_CLKTRCTRL_SW_SLEEP 1 +#define CD_CLKCTRL_CLKTRCTRL_SW_WKUP 2 +#define CD_CLKCTRL_CLKTRCTRL_HW_AUTO 3 + + +/* CM_<clock_domain>_<module>_CLKCTRL */ +#define MODULE_CLKCTRL_MODULEMODE_SHIFT 0 +#define MODULE_CLKCTRL_MODULEMODE_MASK 3 +#define MODULE_CLKCTRL_IDLEST_SHIFT 16 +#define MODULE_CLKCTRL_IDLEST_MASK (3 << 16) + +#define MODULE_CLKCTRL_MODULEMODE_SW_DISABLE 0 +#define MODULE_CLKCTRL_MODULEMODE_HW_AUTO 1 +#define MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN 2 + +#define MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL 0 +#define MODULE_CLKCTRL_IDLEST_TRANSITIONING 1 +#define MODULE_CLKCTRL_IDLEST_IDLE 2 +#define MODULE_CLKCTRL_IDLEST_DISABLED 3 + +/* CM_L4PER_GPIO4_CLKCTRL */ +#define GPIO4_CLKCTRL_OPTFCLKEN_MASK (1 << 8) + +/* CM_L3INIT_HSMMCn_CLKCTRL */ +#define HSMMC_CLKCTRL_CLKSEL_MASK (1 << 24) + +/* CM_WKUP_GPTIMER1_CLKCTRL */ +#define GPTIMER1_CLKCTRL_CLKSEL_MASK (1 << 24) + +/* CM_CAM_ISS_CLKCTRL */ +#define ISS_CLKCTRL_OPTFCLKEN_MASK (1 << 8) + +/* CM_DSS_DSS_CLKCTRL */ +#define DSS_CLKCTRL_OPTFCLKEN_MASK 0xF00 + +/* CM_L3INIT_USBPHY_CLKCTRL */ +#define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK 8 + +/* CM_MPU_MPU_CLKCTRL */ +#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24 +#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (1 << 24) +#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT 25 +#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 25) + +/* Clock frequencies */ +#define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000 +#define OMAP_SYS_CLK_IND_38_4_MHZ 6 +#define OMAP_32K_CLK_FREQ 32768 + +/* PRM_VC_CFG_I2C_CLK */ +#define PRM_VC_CFG_I2C_CLK_SCLH_SHIFT 0 +#define PRM_VC_CFG_I2C_CLK_SCLH_MASK 0xFF +#define PRM_VC_CFG_I2C_CLK_SCLL_SHIFT 8 +#define PRM_VC_CFG_I2C_CLK_SCLL_MASK (0xFF << 8) + +/* PRM_VC_VAL_BYPASS */ +#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400 + +#define PRM_VC_VAL_BYPASS_VALID_BIT 0x1000000 +#define PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT 0 +#define PRM_VC_VAL_BYPASS_SLAVEADDR_MASK 0x7F +#define PRM_VC_VAL_BYPASS_REGADDR_SHIFT 8 +#define PRM_VC_VAL_BYPASS_REGADDR_MASK 0xFF +#define PRM_VC_VAL_BYPASS_DATA_SHIFT 16 +#define PRM_VC_VAL_BYPASS_DATA_MASK 0xFF + +/* SMPS */ +#define SMPS_I2C_SLAVE_ADDR 0x12 +#define SMPS_REG_ADDR_VCORE1 0x55 +#define SMPS_REG_ADDR_VCORE2 0x5B +#define SMPS_REG_ADDR_VCORE3 0x61 + +#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV 607700 +#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV 709000 + +/* TPS */ +#define TPS62361_I2C_SLAVE_ADDR 0x60 +#define TPS62361_REG_ADDR_SET0 0x0 +#define TPS62361_REG_ADDR_SET1 0x1 +#define TPS62361_REG_ADDR_SET2 0x2 +#define TPS62361_REG_ADDR_SET3 0x3 +#define TPS62361_REG_ADDR_CTRL 0x4 +#define TPS62361_REG_ADDR_TEMP 0x5 +#define TPS62361_REG_ADDR_RMP_CTRL 0x6 +#define TPS62361_REG_ADDR_CHIP_ID 0x8 +#define TPS62361_REG_ADDR_CHIP_ID_2 0x9 + +#define TPS62361_BASE_VOLT_MV 500 +#define TPS62361_VSEL0_GPIO 7 + +/* Defines for DPLL setup */ +#define DPLL_LOCKED_FREQ_TOLERANCE_0 0 +#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ 500 +#define DPLL_LOCKED_FREQ_TOLERANCE_1_MHZ 1000 + +#define DPLL_NO_LOCK 0 +#define DPLL_LOCK 1 + +#define NUM_SYS_CLKS 7 + +struct dpll_regs { + u32 cm_clkmode_dpll; + u32 cm_idlest_dpll; + u32 cm_autoidle_dpll; + u32 cm_clksel_dpll; + u32 cm_div_m2_dpll; + u32 cm_div_m3_dpll; + u32 cm_div_h11_dpll; + u32 cm_div_h12_dpll; + u32 cm_div_h13_dpll; + u32 cm_div_h14_dpll; + u32 reserved[2]; + u32 cm_div_h22_dpll; + u32 cm_div_h23_dpll; +}; + +/* DPLL parameter table */ +struct dpll_params { + u32 m; + u32 n; + u8 m2; + u8 m3; + u8 h11; + u8 h12; + u8 h13; + u8 h14; + u8 h22; + u8 h23; +}; + +extern struct omap5_prcm_regs *const prcm; +extern const u32 sys_clk_array[8]; + +void scale_vcores(void); +void do_scale_tps62361(u32 reg, u32 volt_mv); +u32 omap_ddr_clk(void); +void do_scale_vcore(u32 vcore_reg, u32 volt_mv); +void setup_sri2c(void); +void setup_post_dividers(u32 *const base, const struct dpll_params *params); +u32 get_sys_clk_index(void); +void enable_basic_clocks(void); +void enable_non_essential_clocks(void); +void enable_basic_uboot_clocks(void); +void do_enable_clocks(u32 *const *clk_domains, + u32 *const *clk_modules_hw_auto, + u32 *const *clk_modules_explicit_en, + u8 wait_for_enable); +const struct dpll_params *get_mpu_dpll_params(void); +const struct dpll_params *get_core_dpll_params(void); +const struct dpll_params *get_per_dpll_params(void); +const struct dpll_params *get_iva_dpll_params(void); +const struct dpll_params *get_usb_dpll_params(void); +const struct dpll_params *get_abe_dpll_params(void); +#endif /* _CLOCKS_OMAP5_H_ */ diff --git a/arch/arm/include/asm/arch-omap5/cpu.h b/arch/arm/include/asm/arch-omap5/cpu.h new file mode 100644 index 000000000..0697a732d --- /dev/null +++ b/arch/arm/include/asm/arch-omap5/cpu.h @@ -0,0 +1,175 @@ +/* + * (C) Copyright 2006-2010 + * Texas Instruments, <www.ti.com> + * + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef _CPU_H +#define _CPU_H + +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) +#include <asm/types.h> +#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */ + +#ifndef __KERNEL_STRICT_NAMES +#ifndef __ASSEMBLY__ +struct gpmc_cs { + u32 config1; /* 0x00 */ + u32 config2; /* 0x04 */ + u32 config3; /* 0x08 */ + u32 config4; /* 0x0C */ + u32 config5; /* 0x10 */ + u32 config6; /* 0x14 */ + u32 config7; /* 0x18 */ + u32 nand_cmd; /* 0x1C */ + u32 nand_adr; /* 0x20 */ + u32 nand_dat; /* 0x24 */ + u8 res[8]; /* blow up to 0x30 byte */ +}; + +struct gpmc { + u8 res1[0x10]; + u32 sysconfig; /* 0x10 */ + u8 res2[0x4]; + u32 irqstatus; /* 0x18 */ + u32 irqenable; /* 0x1C */ + u8 res3[0x20]; + u32 timeout_control; /* 0x40 */ + u8 res4[0xC]; + u32 config; /* 0x50 */ + u32 status; /* 0x54 */ + u8 res5[0x8]; /* 0x58 */ + struct gpmc_cs cs[8]; /* 0x60, 0x90, .. */ + u8 res6[0x14]; /* 0x1E0 */ + u32 ecc_config; /* 0x1F4 */ + u32 ecc_control; /* 0x1F8 */ + u32 ecc_size_config; /* 0x1FC */ + u32 ecc1_result; /* 0x200 */ + u32 ecc2_result; /* 0x204 */ + u32 ecc3_result; /* 0x208 */ + u32 ecc4_result; /* 0x20C */ + u32 ecc5_result; /* 0x210 */ + u32 ecc6_result; /* 0x214 */ + u32 ecc7_result; /* 0x218 */ + u32 ecc8_result; /* 0x21C */ + u32 ecc9_result; /* 0x220 */ +}; + +/* Used for board specific gpmc initialization */ +extern struct gpmc *gpmc_cfg; + +struct gptimer { + u32 tidr; /* 0x00 r */ + u8 res1[0xc]; + u32 tiocp_cfg; /* 0x10 rw */ + u8 res2[0x10]; + u32 tisr_raw; /* 0x24 r */ + u32 tisr; /* 0x28 rw */ + u32 tier; /* 0x2c rw */ + u32 ticr; /* 0x30 rw */ + u32 twer; /* 0x34 rw */ + u32 tclr; /* 0x38 rw */ + u32 tcrr; /* 0x3c rw */ + u32 tldr; /* 0x40 rw */ + u32 ttgr; /* 0x44 rw */ + u32 twpc; /* 0x48 r */ + u32 tmar; /* 0x4c rw */ + u32 tcar1; /* 0x50 r */ + u32 tcicr; /* 0x54 rw */ + u32 tcar2; /* 0x58 r */ +}; +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL_STRICT_NAMES */ + +/* enable sys_clk NO-prescale /1 */ +#define GPT_EN ((0x0 << 2) | (0x1 << 1) | (0x1 << 0)) + +/* Watchdog */ +#ifndef __KERNEL_STRICT_NAMES +#ifndef __ASSEMBLY__ +struct watchdog { + u8 res1[0x34]; + u32 wwps; /* 0x34 r */ + u8 res2[0x10]; + u32 wspr; /* 0x48 rw */ +}; +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL_STRICT_NAMES */ + +#define WD_UNLOCK1 0xAAAA +#define WD_UNLOCK2 0x5555 + +#define SYSCLKDIV_1 (0x1 << 6) +#define SYSCLKDIV_2 (0x1 << 7) + +#define CLKSEL_GPT1 (0x1 << 0) + +#define EN_GPT1 (0x1 << 0) +#define EN_32KSYNC (0x1 << 2) + +#define ST_WDT2 (0x1 << 5) + +#define RESETDONE (0x1 << 0) + +#define TCLR_ST (0x1 << 0) +#define TCLR_AR (0x1 << 1) +#define TCLR_PRE (0x1 << 5) + +/* GPMC BASE */ +#define GPMC_BASE (OMAP54XX_GPMC_BASE) + +/* I2C base */ +#define I2C_BASE1 (OMAP54XX_L4_PER_BASE + 0x70000) +#define I2C_BASE2 (OMAP54XX_L4_PER_BASE + 0x72000) +#define I2C_BASE3 (OMAP54XX_L4_PER_BASE + 0x60000) + +/* MUSB base */ +#define MUSB_BASE (OMAP54XX_L4_CORE_BASE + 0xAB000) + +/* OMAP4 GPIO registers */ +#define OMAP_GPIO_REVISION 0x0000 +#define OMAP_GPIO_SYSCONFIG 0x0010 +#define OMAP_GPIO_SYSSTATUS 0x0114 +#define OMAP_GPIO_IRQSTATUS1 0x0118 +#define OMAP_GPIO_IRQSTATUS2 0x0128 +#define OMAP_GPIO_IRQENABLE2 0x012c +#define OMAP_GPIO_IRQENABLE1 0x011c +#define OMAP_GPIO_WAKE_EN 0x0120 +#define OMAP_GPIO_CTRL 0x0130 +#define OMAP_GPIO_OE 0x0134 +#define OMAP_GPIO_DATAIN 0x0138 +#define OMAP_GPIO_DATAOUT 0x013c +#define OMAP_GPIO_LEVELDETECT0 0x0140 +#define OMAP_GPIO_LEVELDETECT1 0x0144 +#define OMAP_GPIO_RISINGDETECT 0x0148 +#define OMAP_GPIO_FALLINGDETECT 0x014c +#define OMAP_GPIO_DEBOUNCE_EN 0x0150 +#define OMAP_GPIO_DEBOUNCE_VAL 0x0154 +#define OMAP_GPIO_CLEARIRQENABLE1 0x0160 +#define OMAP_GPIO_SETIRQENABLE1 0x0164 +#define OMAP_GPIO_CLEARWKUENA 0x0180 +#define OMAP_GPIO_SETWKUENA 0x0184 +#define OMAP_GPIO_CLEARDATAOUT 0x0190 +#define OMAP_GPIO_SETDATAOUT 0x0194 + +#endif /* _CPU_H */ diff --git a/arch/arm/include/asm/arch-omap5/gpio.h b/arch/arm/include/asm/arch-omap5/gpio.h new file mode 100644 index 000000000..c14dff0f3 --- /dev/null +++ b/arch/arm/include/asm/arch-omap5/gpio.h @@ -0,0 +1,50 @@ +/* + * Copyright (c) 2009 Wind River Systems, Inc. + * Tom Rix <Tom.Rix@windriver.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * This work is derived from the linux 2.6.27 kernel source + * To fetch, use the kernel repository + * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + * Use the v2.6.27 tag. + * + * Below is the original's header including its copyright + * + * linux/arch/arm/plat-omap/gpio.c + * + * Support functions for OMAP GPIO + * + * Copyright (C) 2003-2005 Nokia Corporation + * Written by Juha Yrjölä <juha.yrjola@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _GPIO_OMAP5_H +#define _GPIO_OMAP5_H + +#include <asm/omap_gpio.h> + +#define OMAP54XX_GPIO1_BASE 0x4Ae10000 +#define OMAP54XX_GPIO2_BASE 0x48055000 +#define OMAP54XX_GPIO3_BASE 0x48057000 +#define OMAP54XX_GPIO4_BASE 0x48059000 +#define OMAP54XX_GPIO5_BASE 0x4805B000 +#define OMAP54XX_GPIO6_BASE 0x4805D000 + +#endif /* _GPIO_OMAP5_H */ diff --git a/arch/arm/include/asm/arch-omap5/i2c.h b/arch/arm/include/asm/arch-omap5/i2c.h new file mode 100644 index 000000000..68be03be5 --- /dev/null +++ b/arch/arm/include/asm/arch-omap5/i2c.h @@ -0,0 +1,74 @@ +/* + * (C) Copyright 2004-2010 + * Texas Instruments, <www.ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP5_I2C_H_ +#define _OMAP5_I2C_H_ + +#define I2C_BUS_MAX 3 +#define I2C_DEFAULT_BASE I2C_BASE1 + +struct i2c { + unsigned short revnb_lo; /* 0x00 */ + unsigned short res1; + unsigned short revnb_hi; /* 0x04 */ + unsigned short res2[13]; + unsigned short sysc; /* 0x20 */ + unsigned short res3; + unsigned short irqstatus_raw; /* 0x24 */ + unsigned short res4; + unsigned short stat; /* 0x28 */ + unsigned short res5; + unsigned short ie; /* 0x2C */ + unsigned short res6; + unsigned short irqenable_clr; /* 0x30 */ + unsigned short res7; + unsigned short iv; /* 0x34 */ + unsigned short res8[45]; + unsigned short syss; /* 0x90 */ + unsigned short res9; + unsigned short buf; /* 0x94 */ + unsigned short res10; + unsigned short cnt; /* 0x98 */ + unsigned short res11; + unsigned short data; /* 0x9C */ + unsigned short res13; + unsigned short res14; /* 0xA0 */ + unsigned short res15; + unsigned short con; /* 0xA4 */ + unsigned short res16; + unsigned short oa; /* 0xA8 */ + unsigned short res17; + unsigned short sa; /* 0xAC */ + unsigned short res18; + unsigned short psc; /* 0xB0 */ + unsigned short res19; + unsigned short scll; /* 0xB4 */ + unsigned short res20; + unsigned short sclh; /* 0xB8 */ + unsigned short res21; + unsigned short systest; /* 0xBC */ + unsigned short res22; + unsigned short bufstat; /* 0xC0 */ + unsigned short res23; +}; + +#endif /* _OMAP5_I2C_H_ */ diff --git a/arch/arm/include/asm/arch-omap5/mmc_host_def.h b/arch/arm/include/asm/arch-omap5/mmc_host_def.h new file mode 100644 index 000000000..74439c9d9 --- /dev/null +++ b/arch/arm/include/asm/arch-omap5/mmc_host_def.h @@ -0,0 +1,174 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation's version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef MMC_HOST_DEF_H +#define MMC_HOST_DEF_H + +/* + * OMAP HSMMC register definitions + */ + +#define OMAP_HSMMC1_BASE 0x4809C100 +#define OMAP_HSMMC2_BASE 0x480B4100 +#define OMAP_HSMMC3_BASE 0x480AD100 + +struct hsmmc { + unsigned char res1[0x10]; + unsigned int sysconfig; /* 0x10 */ + unsigned int sysstatus; /* 0x14 */ + unsigned char res2[0x14]; + unsigned int con; /* 0x2C */ + unsigned char res3[0xD4]; + unsigned int blk; /* 0x104 */ + unsigned int arg; /* 0x108 */ + unsigned int cmd; /* 0x10C */ + unsigned int rsp10; /* 0x110 */ + unsigned int rsp32; /* 0x114 */ + unsigned int rsp54; /* 0x118 */ + unsigned int rsp76; /* 0x11C */ + unsigned int data; /* 0x120 */ + unsigned int pstate; /* 0x124 */ + unsigned int hctl; /* 0x128 */ + unsigned int sysctl; /* 0x12C */ + unsigned int stat; /* 0x130 */ + unsigned int ie; /* 0x134 */ + unsigned char res4[0x8]; + unsigned int capa; /* 0x140 */ +}; + +/* + * OMAP HS MMC Bit definitions + */ +#define MMC_SOFTRESET (0x1 << 1) +#define RESETDONE (0x1 << 0) +#define NOOPENDRAIN (0x0 << 0) +#define OPENDRAIN (0x1 << 0) +#define OD (0x1 << 0) +#define INIT_NOINIT (0x0 << 1) +#define INIT_INITSTREAM (0x1 << 1) +#define HR_NOHOSTRESP (0x0 << 2) +#define STR_BLOCK (0x0 << 3) +#define MODE_FUNC (0x0 << 4) +#define DW8_1_4BITMODE (0x0 << 5) +#define MIT_CTO (0x0 << 6) +#define CDP_ACTIVEHIGH (0x0 << 7) +#define WPP_ACTIVEHIGH (0x0 << 8) +#define RESERVED_MASK (0x3 << 9) +#define CTPL_MMC_SD (0x0 << 11) +#define BLEN_512BYTESLEN (0x200 << 0) +#define NBLK_STPCNT (0x0 << 16) +#define DE_DISABLE (0x0 << 0) +#define BCE_DISABLE (0x0 << 1) +#define BCE_ENABLE (0x1 << 1) +#define ACEN_DISABLE (0x0 << 2) +#define DDIR_OFFSET (4) +#define DDIR_MASK (0x1 << 4) +#define DDIR_WRITE (0x0 << 4) +#define DDIR_READ (0x1 << 4) +#define MSBS_SGLEBLK (0x0 << 5) +#define MSBS_MULTIBLK (0x1 << 5) +#define RSP_TYPE_OFFSET (16) +#define RSP_TYPE_MASK (0x3 << 16) +#define RSP_TYPE_NORSP (0x0 << 16) +#define RSP_TYPE_LGHT136 (0x1 << 16) +#define RSP_TYPE_LGHT48 (0x2 << 16) +#define RSP_TYPE_LGHT48B (0x3 << 16) +#define CCCE_NOCHECK (0x0 << 19) +#define CCCE_CHECK (0x1 << 19) +#define CICE_NOCHECK (0x0 << 20) +#define CICE_CHECK (0x1 << 20) +#define DP_OFFSET (21) +#define DP_MASK (0x1 << 21) +#define DP_NO_DATA (0x0 << 21) +#define DP_DATA (0x1 << 21) +#define CMD_TYPE_NORMAL (0x0 << 22) +#define INDEX_OFFSET (24) +#define INDEX_MASK (0x3f << 24) +#define INDEX(i) (i << 24) +#define DATI_MASK (0x1 << 1) +#define DATI_CMDDIS (0x1 << 1) +#define DTW_1_BITMODE (0x0 << 1) +#define DTW_4_BITMODE (0x1 << 1) +#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/ +#define SDBP_PWROFF (0x0 << 8) +#define SDBP_PWRON (0x1 << 8) +#define SDVS_1V8 (0x5 << 9) +#define SDVS_3V0 (0x6 << 9) +#define ICE_MASK (0x1 << 0) +#define ICE_STOP (0x0 << 0) +#define ICS_MASK (0x1 << 1) +#define ICS_NOTREADY (0x0 << 1) +#define ICE_OSCILLATE (0x1 << 0) +#define CEN_MASK (0x1 << 2) +#define CEN_DISABLE (0x0 << 2) +#define CEN_ENABLE (0x1 << 2) +#define CLKD_OFFSET (6) +#define CLKD_MASK (0x3FF << 6) +#define DTO_MASK (0xF << 16) +#define DTO_15THDTO (0xE << 16) +#define SOFTRESETALL (0x1 << 24) +#define CC_MASK (0x1 << 0) +#define TC_MASK (0x1 << 1) +#define BWR_MASK (0x1 << 4) +#define BRR_MASK (0x1 << 5) +#define ERRI_MASK (0x1 << 15) +#define IE_CC (0x01 << 0) +#define IE_TC (0x01 << 1) +#define IE_BWR (0x01 << 4) +#define IE_BRR (0x01 << 5) +#define IE_CTO (0x01 << 16) +#define IE_CCRC (0x01 << 17) +#define IE_CEB (0x01 << 18) +#define IE_CIE (0x01 << 19) +#define IE_DTO (0x01 << 20) +#define IE_DCRC (0x01 << 21) +#define IE_DEB (0x01 << 22) +#define IE_CERR (0x01 << 28) +#define IE_BADA (0x01 << 29) + +#define VS30_3V0SUP (1 << 25) +#define VS18_1V8SUP (1 << 26) + +/* Driver definitions */ +#define MMCSD_SECTOR_SIZE 512 +#define MMC_CARD 0 +#define SD_CARD 1 +#define BYTE_MODE 0 +#define SECTOR_MODE 1 +#define CLK_INITSEQ 0 +#define CLK_400KHZ 1 +#define CLK_MISC 2 + +#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) +#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) + +/* Clock Configurations and Macros */ +#define MMC_CLOCK_REFERENCE 96 /* MHz */ + +#define mmc_reg_out(addr, mask, val)\ + writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr)) + +int omap_mmc_init(int dev_index); + +#endif /* MMC_HOST_DEF_H */ diff --git a/arch/arm/include/asm/arch-omap5/mux_omap5.h b/arch/arm/include/asm/arch-omap5/mux_omap5.h new file mode 100644 index 000000000..b8c21853f --- /dev/null +++ b/arch/arm/include/asm/arch-omap5/mux_omap5.h @@ -0,0 +1,344 @@ +/* + * (C) Copyright 2004-2009 + * Texas Instruments Incorporated + * Richard Woodruff <r-woodruff2@ti.com> + * Aneesh V <aneesh@ti.com> + * Balaji Krishnamoorthy <balajitk@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _MUX_OMAP5_H_ +#define _MUX_OMAP5_H_ + +#include <asm/types.h> + +struct pad_conf_entry { + + u16 offset; + + u16 val; + +} __attribute__ ((__packed__)); + +#ifdef CONFIG_OFF_PADCONF +#define OFF_PD (1 << 12) +#define OFF_PU (3 << 12) +#define OFF_OUT_PTD (0 << 10) +#define OFF_OUT_PTU (2 << 10) +#define OFF_IN (1 << 10) +#define OFF_OUT (0 << 10) +#define OFF_EN (1 << 9) +#else +#define OFF_PD (0 << 12) +#define OFF_PU (0 << 12) +#define OFF_OUT_PTD (0 << 10) +#define OFF_OUT_PTU (0 << 10) +#define OFF_IN (0 << 10) +#define OFF_OUT (0 << 10) +#define OFF_EN (0 << 9) +#endif + +#define IEN (1 << 8) +#define IDIS (0 << 8) +#define PTU (3 << 3) +#define PTD (1 << 3) +#define EN (1 << 3) +#define DIS (0 << 3) + +#define M0 0 +#define M1 1 +#define M2 2 +#define M3 3 +#define M4 4 +#define M5 5 +#define M6 6 +#define M7 7 + +#define SAFE_MODE M7 + +#ifdef CONFIG_OFF_PADCONF +#define OFF_IN_PD (OFF_PD | OFF_IN | OFF_EN) +#define OFF_IN_PU (OFF_PU | OFF_IN | OFF_EN) +#define OFF_OUT_PD (OFF_OUT_PTD | OFF_OUT | OFF_EN) +#define OFF_OUT_PU (OFF_OUT_PTU | OFF_OUT | OFF_EN) +#else +#define OFF_IN_PD 0 +#define OFF_IN_PU 0 +#define OFF_OUT_PD 0 +#define OFF_OUT_PU 0 +#endif + +#define CORE_REVISION 0x0000 +#define CORE_HWINFO 0x0004 +#define CORE_SYSCONFIG 0x0010 +#define GPMC_AD0 0x0040 +#define GPMC_AD1 0x0042 +#define GPMC_AD2 0x0044 +#define GPMC_AD3 0x0046 +#define GPMC_AD4 0x0048 +#define GPMC_AD5 0x004A +#define GPMC_AD6 0x004C +#define GPMC_AD7 0x004E +#define GPMC_AD8 0x0050 +#define GPMC_AD9 0x0052 +#define GPMC_AD10 0x0054 +#define GPMC_AD11 0x0056 +#define GPMC_AD12 0x0058 +#define GPMC_AD13 0x005A +#define GPMC_AD14 0x005C +#define GPMC_AD15 0x005E +#define GPMC_A16 0x0060 +#define GPMC_A17 0x0062 +#define GPMC_A18 0x0064 +#define GPMC_A19 0x0066 +#define GPMC_A20 0x0068 +#define GPMC_A21 0x006A +#define GPMC_A22 0x006C +#define GPMC_A23 0x006E +#define GPMC_A24 0x0070 +#define GPMC_A25 0x0072 +#define GPMC_NCS0 0x0074 +#define GPMC_NCS1 0x0076 +#define GPMC_NCS2 0x0078 +#define GPMC_NCS3 0x007A +#define GPMC_NWP 0x007C +#define GPMC_CLK 0x007E +#define GPMC_NADV_ALE 0x0080 +#define GPMC_NOE 0x0082 +#define GPMC_NWE 0x0084 +#define GPMC_NBE0_CLE 0x0086 +#define GPMC_NBE1 0x0088 +#define GPMC_WAIT0 0x008A +#define GPMC_WAIT1 0x008C +#define C2C_DATA11 0x008E +#define C2C_DATA12 0x0090 +#define C2C_DATA13 0x0092 +#define C2C_DATA14 0x0094 +#define C2C_DATA15 0x0096 +#define HDMI_HPD 0x0098 +#define HDMI_CEC 0x009A +#define HDMI_DDC_SCL 0x009C +#define HDMI_DDC_SDA 0x009E +#define CSI21_DX0 0x00A0 +#define CSI21_DY0 0x00A2 +#define CSI21_DX1 0x00A4 +#define CSI21_DY1 0x00A6 +#define CSI21_DX2 0x00A8 +#define CSI21_DY2 0x00AA +#define CSI21_DX3 0x00AC +#define CSI21_DY3 0x00AE +#define CSI21_DX4 0x00B0 +#define CSI21_DY4 0x00B2 +#define CSI22_DX0 0x00B4 +#define CSI22_DY0 0x00B6 +#define CSI22_DX1 0x00B8 +#define CSI22_DY1 0x00BA +#define CAM_SHUTTER 0x00BC +#define CAM_STROBE 0x00BE +#define CAM_GLOBALRESET 0x00C0 +#define USBB1_ULPITLL_CLK 0x00C2 +#define USBB1_ULPITLL_STP 0x00C4 +#define USBB1_ULPITLL_DIR 0x00C6 +#define USBB1_ULPITLL_NXT 0x00C8 +#define USBB1_ULPITLL_DAT0 0x00CA +#define USBB1_ULPITLL_DAT1 0x00CC +#define USBB1_ULPITLL_DAT2 0x00CE +#define USBB1_ULPITLL_DAT3 0x00D0 +#define USBB1_ULPITLL_DAT4 0x00D2 +#define USBB1_ULPITLL_DAT5 0x00D4 +#define USBB1_ULPITLL_DAT6 0x00D6 +#define USBB1_ULPITLL_DAT7 0x00D8 +#define USBB1_HSIC_DATA 0x00DA +#define USBB1_HSIC_STROBE 0x00DC +#define USBC1_ICUSB_DP 0x00DE +#define USBC1_ICUSB_DM 0x00E0 +#define SDMMC1_CLK 0x00E2 +#define SDMMC1_CMD 0x00E4 +#define SDMMC1_DAT0 0x00E6 +#define SDMMC1_DAT1 0x00E8 +#define SDMMC1_DAT2 0x00EA +#define SDMMC1_DAT3 0x00EC +#define SDMMC1_DAT4 0x00EE +#define SDMMC1_DAT5 0x00F0 +#define SDMMC1_DAT6 0x00F2 +#define SDMMC1_DAT7 0x00F4 +#define ABE_MCBSP2_CLKX 0x00F6 +#define ABE_MCBSP2_DR 0x00F8 +#define ABE_MCBSP2_DX 0x00FA +#define ABE_MCBSP2_FSX 0x00FC +#define ABE_MCBSP1_CLKX 0x00FE +#define ABE_MCBSP1_DR 0x0100 +#define ABE_MCBSP1_DX 0x0102 +#define ABE_MCBSP1_FSX 0x0104 +#define ABE_PDM_UL_DATA 0x0106 +#define ABE_PDM_DL_DATA 0x0108 +#define ABE_PDM_FRAME 0x010A +#define ABE_PDM_LB_CLK 0x010C +#define ABE_CLKS 0x010E +#define ABE_DMIC_CLK1 0x0110 +#define ABE_DMIC_DIN1 0x0112 +#define ABE_DMIC_DIN2 0x0114 +#define ABE_DMIC_DIN3 0x0116 +#define UART2_CTS 0x0118 +#define UART2_RTS 0x011A +#define UART2_RX 0x011C +#define UART2_TX 0x011E +#define HDQ_SIO 0x0120 +#define I2C1_SCL 0x0122 +#define I2C1_SDA 0x0124 +#define I2C2_SCL 0x0126 +#define I2C2_SDA 0x0128 +#define I2C3_SCL 0x012A +#define I2C3_SDA 0x012C +#define I2C4_SCL 0x012E +#define I2C4_SDA 0x0130 +#define MCSPI1_CLK 0x0132 +#define MCSPI1_SOMI 0x0134 +#define MCSPI1_SIMO 0x0136 +#define MCSPI1_CS0 0x0138 +#define MCSPI1_CS1 0x013A +#define MCSPI1_CS2 0x013C +#define MCSPI1_CS3 0x013E +#define UART3_CTS_RCTX 0x0140 +#define UART3_RTS_SD 0x0142 +#define UART3_RX_IRRX 0x0144 +#define UART3_TX_IRTX 0x0146 +#define SDMMC5_CLK 0x0148 +#define SDMMC5_CMD 0x014A +#define SDMMC5_DAT0 0x014C +#define SDMMC5_DAT1 0x014E +#define SDMMC5_DAT2 0x0150 +#define SDMMC5_DAT3 0x0152 +#define MCSPI4_CLK 0x0154 +#define MCSPI4_SIMO 0x0156 +#define MCSPI4_SOMI 0x0158 +#define MCSPI4_CS0 0x015A +#define UART4_RX 0x015C +#define UART4_TX 0x015E +#define USBB2_ULPITLL_CLK 0x0160 +#define USBB2_ULPITLL_STP 0x0162 +#define USBB2_ULPITLL_DIR 0x0164 +#define USBB2_ULPITLL_NXT 0x0166 +#define USBB2_ULPITLL_DAT0 0x0168 +#define USBB2_ULPITLL_DAT1 0x016A +#define USBB2_ULPITLL_DAT2 0x016C +#define USBB2_ULPITLL_DAT3 0x016E +#define USBB2_ULPITLL_DAT4 0x0170 +#define USBB2_ULPITLL_DAT5 0x0172 +#define USBB2_ULPITLL_DAT6 0x0174 +#define USBB2_ULPITLL_DAT7 0x0176 +#define USBB2_HSIC_DATA 0x0178 +#define USBB2_HSIC_STROBE 0x017A +#define UNIPRO_TX0 0x017C +#define UNIPRO_TY0 0x017E +#define UNIPRO_TX1 0x0180 +#define UNIPRO_TY1 0x0182 +#define UNIPRO_TX2 0x0184 +#define UNIPRO_TY2 0x0186 +#define UNIPRO_RX0 0x0188 +#define UNIPRO_RY0 0x018A +#define UNIPRO_RX1 0x018C +#define UNIPRO_RY1 0x018E +#define UNIPRO_RX2 0x0190 +#define UNIPRO_RY2 0x0192 +#define USBA0_OTG_CE 0x0194 +#define USBA0_OTG_DP 0x0196 +#define USBA0_OTG_DM 0x0198 +#define FREF_CLK1_OUT 0x019A +#define FREF_CLK2_OUT 0x019C +#define SYS_NIRQ1 0x019E +#define SYS_NIRQ2 0x01A0 +#define SYS_BOOT0 0x01A2 +#define SYS_BOOT1 0x01A4 +#define SYS_BOOT2 0x01A6 +#define SYS_BOOT3 0x01A8 +#define SYS_BOOT4 0x01AA +#define SYS_BOOT5 0x01AC +#define DPM_EMU0 0x01AE +#define DPM_EMU1 0x01B0 +#define DPM_EMU2 0x01B2 +#define DPM_EMU3 0x01B4 +#define DPM_EMU4 0x01B6 +#define DPM_EMU5 0x01B8 +#define DPM_EMU6 0x01BA +#define DPM_EMU7 0x01BC +#define DPM_EMU8 0x01BE +#define DPM_EMU9 0x01C0 +#define DPM_EMU10 0x01C2 +#define DPM_EMU11 0x01C4 +#define DPM_EMU12 0x01C6 +#define DPM_EMU13 0x01C8 +#define DPM_EMU14 0x01CA +#define DPM_EMU15 0x01CC +#define DPM_EMU16 0x01CE +#define DPM_EMU17 0x01D0 +#define DPM_EMU18 0x01D2 +#define DPM_EMU19 0x01D4 +#define WAKEUPEVENT_0 0x01D8 +#define WAKEUPEVENT_1 0x01DC +#define WAKEUPEVENT_2 0x01E0 +#define WAKEUPEVENT_3 0x01E4 +#define WAKEUPEVENT_4 0x01E8 +#define WAKEUPEVENT_5 0x01EC +#define WAKEUPEVENT_6 0x01F0 + +#define WKUP_REVISION 0x0000 +#define WKUP_HWINFO 0x0004 +#define WKUP_SYSCONFIG 0x0010 +#define PAD0_SIM_IO 0x0040 +#define PAD1_SIM_CLK 0x0042 +#define PAD0_SIM_RESET 0x0044 +#define PAD1_SIM_CD 0x0046 +#define PAD0_SIM_PWRCTRL 0x0048 +#define PAD1_SR_SCL 0x004A +#define PAD0_SR_SDA 0x004C +#define PAD1_FREF_XTAL_IN 0x004E +#define PAD0_FREF_SLICER_IN 0x0050 +#define PAD1_FREF_CLK_IOREQ 0x0052 +#define PAD0_FREF_CLK0_OUT 0x0054 +#define PAD1_FREF_CLK3_REQ 0x0056 +#define PAD0_FREF_CLK3_OUT 0x0058 +#define PAD1_FREF_CLK4_REQ 0x005A +#define PAD0_FREF_CLK4_OUT 0x005C +#define PAD1_SYS_32K 0x005E +#define PAD0_SYS_NRESPWRON 0x0060 +#define PAD1_SYS_NRESWARM 0x0062 +#define PAD0_SYS_PWR_REQ 0x0064 +#define PAD1_SYS_PWRON_RESET 0x0066 +#define PAD0_SYS_BOOT6 0x0068 +#define PAD1_SYS_BOOT7 0x006A +#define PAD0_JTAG_NTRST 0x006C +#define PAD1_JTAG_TCK 0x006D +#define PAD0_JTAG_RTCK 0x0070 +#define PAD1_JTAG_TMS_TMSC 0x0072 +#define PAD0_JTAG_TDI 0x0074 +#define PAD1_JTAG_TDO 0x0076 +#define PADCONF_WAKEUPEVENT_0 0x007C +#define CONTROL_SMART1NOPMIO_PADCONF_0 0x05A0 +#define CONTROL_SMART1NOPMIO_PADCONF_1 0x05A4 +#define PADCONF_MODE 0x05A8 +#define CONTROL_XTAL_OSCILLATOR 0x05AC +#define CONTROL_CONTROL_I2C_2 0x0604 +#define CONTROL_CONTROL_JTAG 0x0608 +#define CONTROL_CONTROL_SYS 0x060C +#define CONTROL_SPARE_RW 0x0614 +#define CONTROL_SPARE_R 0x0618 +#define CONTROL_SPARE_R_C0 0x061C + +#endif /* _MUX_OMAP5_H_ */ diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h new file mode 100644 index 000000000..d811d6ec2 --- /dev/null +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -0,0 +1,223 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Authors: + * Aneesh V <aneesh@ti.com> + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP5_H_ +#define _OMAP5_H_ + +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) +#include <asm/types.h> +#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */ + +/* + * L4 Peripherals - L4 Wakeup and L4 Core now + */ +#define OMAP54XX_L4_CORE_BASE 0x4A000000 +#define OMAP54XX_L4_WKUP_BASE 0x4Ae00000 +#define OMAP54XX_L4_PER_BASE 0x48000000 + +#define OMAP54XX_DRAM_ADDR_SPACE_START 0x80000000 +#define OMAP54XX_DRAM_ADDR_SPACE_END 0xD0000000 +#define DRAM_ADDR_SPACE_START OMAP54XX_DRAM_ADDR_SPACE_START +#define DRAM_ADDR_SPACE_END OMAP54XX_DRAM_ADDR_SPACE_END + +/* CONTROL */ +#define CTRL_BASE (OMAP54XX_L4_CORE_BASE + 0x2000) +#define CONTROL_PADCONF_CORE (CTRL_BASE + 0x0800) +#define CONTROL_PADCONF_WKUP (OMAP54XX_L4_WKUP_BASE + 0xc800) + +/* LPDDR2 IO regs. To be verified */ +#define LPDDR2_IO_REGS_BASE 0x4A100638 + +/* CONTROL_ID_CODE */ +#define CONTROL_ID_CODE (CTRL_BASE + 0x204) + +/* To be verified */ +#define OMAP5_CONTROL_ID_CODE_ES1_0 0x0B85202F + +/* STD_FUSE_PROD_ID_1 */ +#define STD_FUSE_PROD_ID_1 (CTRL_BASE + 0x218) +#define PROD_ID_1_SILICON_TYPE_SHIFT 16 +#define PROD_ID_1_SILICON_TYPE_MASK (3 << 16) + +/* UART */ +#define UART1_BASE (OMAP54XX_L4_PER_BASE + 0x6a000) +#define UART2_BASE (OMAP54XX_L4_PER_BASE + 0x6c000) +#define UART3_BASE (OMAP54XX_L4_PER_BASE + 0x20000) + +/* General Purpose Timers */ +#define GPT1_BASE (OMAP54XX_L4_WKUP_BASE + 0x18000) +#define GPT2_BASE (OMAP54XX_L4_PER_BASE + 0x32000) +#define GPT3_BASE (OMAP54XX_L4_PER_BASE + 0x34000) + +/* Watchdog Timer2 - MPU watchdog */ +#define WDT2_BASE (OMAP54XX_L4_WKUP_BASE + 0x14000) + +/* 32KTIMER */ +#define SYNC_32KTIMER_BASE (OMAP54XX_L4_WKUP_BASE + 0x4000) + +/* GPMC */ +#define OMAP54XX_GPMC_BASE 0x50000000 + +/* SYSTEM CONTROL MODULE */ +#define SYSCTRL_GENERAL_CORE_BASE 0x4A002000 + +/* + * Hardware Register Details + */ + +/* Watchdog Timer */ +#define WD_UNLOCK1 0xAAAA +#define WD_UNLOCK2 0x5555 + +/* GP Timer */ +#define TCLR_ST (0x1 << 0) +#define TCLR_AR (0x1 << 1) +#define TCLR_PRE (0x1 << 5) + +/* + * PRCM + */ + +/* PRM */ +#define PRM_BASE 0x4AE06000 +#define PRM_DEVICE_BASE (PRM_BASE + 0x1B00) + +#define PRM_RSTCTRL PRM_DEVICE_BASE +#define PRM_RSTCTRL_RESET 0x01 + +/* Control Module */ +#define LDOSRAM_ACTMODE_VSET_IN_MASK (0x1F << 5) +#define LDOSRAM_VOLT_CTRL_OVERRIDE 0x0401040f +#define CONTROL_EFUSE_1_OVERRIDE 0x1C4D0110 +#define CONTROL_EFUSE_2_OVERRIDE 0x00084000 + +/* LPDDR2 IO regs */ +#define CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN 0x1C1C1C1C +#define CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER 0x9E9E9E9E +#define CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN 0x7C7C7C7C +#define LPDDR2IO_GR10_WD_MASK (3 << 17) +#define CONTROL_LPDDR2IO_3_VAL 0xA0888C00 + +/* CONTROL_EFUSE_2 */ +#define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000 + +#define MMC1_PWRDNZ (1 << 26) +#define MMC1_PBIASLITE_PWRDNZ (1 << 22) +#define MMC1_PBIASLITE_VMODE (1 << 21) + +#ifndef __ASSEMBLY__ + +struct s32ktimer { + unsigned char res[0x10]; + unsigned int s32k_cr; /* 0x10 */ +}; + +struct omap4_sys_ctrl_regs { + unsigned int pad1[129]; + unsigned int control_id_code; /* 0x4A002204 */ + unsigned int pad11[22]; + unsigned int control_std_fuse_opp_bgap; /* 0x4a002260 */ + unsigned int pad2[47]; + unsigned int control_ldosram_iva_voltage_ctrl; /* 0x4A002320 */ + unsigned int control_ldosram_mpu_voltage_ctrl; /* 0x4A002324 */ + unsigned int control_ldosram_core_voltage_ctrl; /* 0x4A002328 */ + unsigned int pad3[260277]; + unsigned int control_pbiaslite; /* 0x4A100600 */ + unsigned int pad4[63]; + unsigned int control_efuse_1; /* 0x4A100700 */ + unsigned int control_efuse_2; /* 0x4A100704 */ +}; + +struct control_lpddr2io_regs { + unsigned int control_lpddr2io1_0; + unsigned int control_lpddr2io1_1; + unsigned int control_lpddr2io1_2; + unsigned int control_lpddr2io1_3; + unsigned int control_lpddr2io2_0; + unsigned int control_lpddr2io2_1; + unsigned int control_lpddr2io2_2; + unsigned int control_lpddr2io2_3; +}; +#endif /* __ASSEMBLY__ */ + +/* + * Non-secure SRAM Addresses + * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE + * at 0x40304000(EMU base) so that our code works for both EMU and GP + */ +#define NON_SECURE_SRAM_START 0x40304000 +#define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */ +/* base address for indirect vectors (internal boot mode) */ +#define SRAM_ROM_VECT_BASE 0x4031F000 +/* Temporary SRAM stack used while low level init is done */ +#define LOW_LEVEL_SRAM_STACK NON_SECURE_SRAM_END + +#define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START +/* + * SRAM scratch space entries + */ +#define OMAP5_SRAM_SCRATCH_OMAP5_REV SRAM_SCRATCH_SPACE_ADDR +#define OMAP5_SRAM_SCRATCH_EMIF_SIZE (SRAM_SCRATCH_SPACE_ADDR + 0x4) +#define OMAP5_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC) +#define OMAP5_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10) +#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x14) + +/* Silicon revisions */ +#define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF +#define OMAP4430_ES1_0 0x44300100 +#define OMAP4430_ES2_0 0x44300200 +#define OMAP4430_ES2_1 0x44300210 +#define OMAP4430_ES2_2 0x44300220 +#define OMAP4430_ES2_3 0x44300230 +#define OMAP4460_ES1_0 0x44600100 +#define OMAP4460_ES1_1 0x44600110 + +/* ROM code defines */ +/* Boot device */ +#define BOOT_DEVICE_MASK 0xFF +#define BOOT_DEVICE_OFFSET 0x8 +#define DEV_DESC_PTR_OFFSET 0x4 +#define DEV_DATA_PTR_OFFSET 0x18 +#define BOOT_MODE_OFFSET 0x8 +#define RESET_REASON_OFFSET 0x9 +#define CH_FLAGS_OFFSET 0xA + +#define CH_FLAGS_CHSETTINGS (0x1 << 0) +#define CH_FLAGS_CHRAM (0x1 << 1) +#define CH_FLAGS_CHFLASH (0x1 << 2) +#define CH_FLAGS_CHMMCSD (0x1 << 3) + +#ifndef __ASSEMBLY__ +struct omap_boot_parameters { + char *boot_message; + unsigned int mem_boot_descriptor; + unsigned char omap_bootdevice; + unsigned char reset_reason; + unsigned char ch_flags; +}; +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h new file mode 100644 index 000000000..c31e18ca2 --- /dev/null +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -0,0 +1,122 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SYS_PROTO_H_ +#define _SYS_PROTO_H_ + +#include <asm/arch/omap.h> +#include <asm/io.h> +#include <asm/arch/clocks.h> +#include <asm/omap_common.h> +#include <asm/arch/mux_omap5.h> +#include <asm/arch/clocks.h> + +struct omap_sysinfo { + char *board_string; +}; +extern const struct omap_sysinfo sysinfo; + +void gpmc_init(void); +void watchdog_init(void); +u32 get_device_type(void); +void do_set_mux(u32 base, struct pad_conf_entry const *array, int size); +void set_muxconf_regs_essential(void); +void set_muxconf_regs_non_essential(void); +void sr32(void *, u32, u32, u32); +u32 wait_on_value(u32, u32, void *, u32); +void sdelay(unsigned long); +void omap_rev_string(char *omap_rev_string); +void setup_clocks_for_console(void); +void prcm_init(void); +void bypass_dpll(u32 *const base); +void freq_update_core(void); +u32 get_sys_clk_freq(void); +u32 omap5_ddr_clk(void); +void cancel_out(u32 *num, u32 *den, u32 den_limit); +void sdram_init(void); +u32 omap_sdram_size(void); +u32 cortex_rev(void); +void init_omap_revision(void); +void do_io_settings(void); + +/* + * This is used to verify if the configuration header + * was executed by Romcode prior to control of transfer + * to the bootloader. SPL is responsible for saving and + * passing this to the u-boot. + */ +extern struct omap_boot_parameters boot_params; + +static inline u32 running_from_sdram(void) +{ + u32 pc; + asm volatile ("mov %0, pc" : "=r" (pc)); + return ((pc >= OMAP54XX_DRAM_ADDR_SPACE_START) && + (pc < OMAP54XX_DRAM_ADDR_SPACE_END)); +} + +static inline u8 uboot_loaded_by_spl(void) +{ + /* + * u-boot can be running from sdram either because of configuration + * Header or by SPL. If because of CH, then the romcode sets the + * CHSETTINGS executed bit to true in the boot parameter structure that + * it passes to the bootloader.This parameter is stored in the ch_flags + * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a + * mandatory section if CH is present. + */ + if ((boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS)) + return 0; + else + return running_from_sdram(); +} +/* + * The basic hardware init of OMAP(s_init()) can happen in 4 + * different contexts: + * 1. SPL running from SRAM + * 2. U-Boot running from FLASH + * 3. Non-XIP U-Boot loaded to SDRAM by SPL + * 4. Non-XIP U-Boot loaded to SDRAM by ROM code using the + * Configuration Header feature + * + * This function finds this context. + * Defining as inline may help in compiling out unused functions in SPL + */ +static inline u32 omap_hw_init_context(void) +{ +#ifdef CONFIG_SPL_BUILD + return OMAP_INIT_CONTEXT_SPL; +#else + if (uboot_loaded_by_spl()) + return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL; + else if (running_from_sdram()) + return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH; + else + return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR; +#endif +} + +static inline u32 omap_revision(void) +{ + extern u32 *const omap5_revision; + return *omap5_revision; +} + +#endif diff --git a/arch/arm/include/asm/arch-pxa/pxa-regs.h b/arch/arm/include/asm/arch-pxa/pxa-regs.h index 109fdc06a..52c79a9e6 100644 --- a/arch/arm/include/asm/arch-pxa/pxa-regs.h +++ b/arch/arm/include/asm/arch-pxa/pxa-regs.h @@ -315,117 +315,6 @@ typedef void (*ExcpHndlr) (void) ; /******************************************************************************/ /* - * UARTs - */ -/* Full Function UART (FFUART) */ -#define FFUART FFRBR -#define FFRBR 0x40100000 /* Receive Buffer Register (read only) */ -#define FFTHR 0x40100000 /* Transmit Holding Register (write only) */ -#define FFIER 0x40100004 /* Interrupt Enable Register (read/write) */ -#define FFIIR 0x40100008 /* Interrupt ID Register (read only) */ -#define FFFCR 0x40100008 /* FIFO Control Register (write only) */ -#define FFLCR 0x4010000C /* Line Control Register (read/write) */ -#define FFMCR 0x40100010 /* Modem Control Register (read/write) */ -#define FFLSR 0x40100014 /* Line Status Register (read only) */ -#define FFMSR 0x40100018 /* Modem Status Register (read only) */ -#define FFSPR 0x4010001C /* Scratch Pad Register (read/write) */ -#define FFISR 0x40100020 /* Infrared Selection Register (read/write) */ -#define FFDLL 0x40100000 /* Divisor Latch Low Register (DLAB = 1) (read/write) */ -#define FFDLH 0x40100004 /* Divisor Latch High Register (DLAB = 1) (read/write) */ - -/* Bluetooth UART (BTUART) */ -#define BTUART BTRBR -#define BTRBR 0x40200000 /* Receive Buffer Register (read only) */ -#define BTTHR 0x40200000 /* Transmit Holding Register (write only) */ -#define BTIER 0x40200004 /* Interrupt Enable Register (read/write) */ -#define BTIIR 0x40200008 /* Interrupt ID Register (read only) */ -#define BTFCR 0x40200008 /* FIFO Control Register (write only) */ -#define BTLCR 0x4020000C /* Line Control Register (read/write) */ -#define BTMCR 0x40200010 /* Modem Control Register (read/write) */ -#define BTLSR 0x40200014 /* Line Status Register (read only) */ -#define BTMSR 0x40200018 /* Modem Status Register (read only) */ -#define BTSPR 0x4020001C /* Scratch Pad Register (read/write) */ -#define BTISR 0x40200020 /* Infrared Selection Register (read/write) */ -#define BTDLL 0x40200000 /* Divisor Latch Low Register (DLAB = 1) (read/write) */ -#define BTDLH 0x40200004 /* Divisor Latch High Register (DLAB = 1) (read/write) */ - -/* Standard UART (STUART) */ -#define STUART STRBR -#define STRBR 0x40700000 /* Receive Buffer Register (read only) */ -#define STTHR 0x40700000 /* Transmit Holding Register (write only) */ -#define STIER 0x40700004 /* Interrupt Enable Register (read/write) */ -#define STIIR 0x40700008 /* Interrupt ID Register (read only) */ -#define STFCR 0x40700008 /* FIFO Control Register (write only) */ -#define STLCR 0x4070000C /* Line Control Register (read/write) */ -#define STMCR 0x40700010 /* Modem Control Register (read/write) */ -#define STLSR 0x40700014 /* Line Status Register (read only) */ -#define STMSR 0x40700018 /* Reserved */ -#define STSPR 0x4070001C /* Scratch Pad Register (read/write) */ -#define STISR 0x40700020 /* Infrared Selection Register (read/write) */ -#define STDLL 0x40700000 /* Divisor Latch Low Register (DLAB = 1) (read/write) */ -#define STDLH 0x40700004 /* Divisor Latch High Register (DLAB = 1) (read/write) */ - -#define IER_DMAE (1 << 7) /* DMA Requests Enable */ -#define IER_UUE (1 << 6) /* UART Unit Enable */ -#define IER_NRZE (1 << 5) /* NRZ coding Enable */ -#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */ -#define IER_MIE (1 << 3) /* Modem Interrupt Enable */ -#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */ -#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */ -#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */ - -#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */ -#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */ -#define IIR_TOD (1 << 3) /* Time Out Detected */ -#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */ -#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */ -#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */ - -#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */ -#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */ -#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */ -#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */ -#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */ -#define FCR_ITL_1 (0) -#define FCR_ITL_8 (FCR_ITL1) -#define FCR_ITL_16 (FCR_ITL2) -#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1) - -#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */ -#define LCR_SB (1 << 6) /* Set Break */ -#define LCR_STKYP (1 << 5) /* Sticky Parity */ -#define LCR_EPS (1 << 4) /* Even Parity Select */ -#define LCR_PEN (1 << 3) /* Parity Enable */ -#define LCR_STB (1 << 2) /* Stop Bit */ -#define LCR_WLS1 (1 << 1) /* Word Length Select */ -#define LCR_WLS0 (1 << 0) /* Word Length Select */ - -#define LSR_FIFOE (1 << 7) /* FIFO Error Status */ -#define LSR_TEMT (1 << 6) /* Transmitter Empty */ -#define LSR_TDRQ (1 << 5) /* Transmit Data Request */ -#define LSR_BI (1 << 4) /* Break Interrupt */ -#define LSR_FE (1 << 3) /* Framing Error */ -#define LSR_PE (1 << 2) /* Parity Error */ -#define LSR_OE (1 << 1) /* Overrun Error */ -#define LSR_DR (1 << 0) /* Data Ready */ - -#define MCR_LOOP (1 << 4) /* */ -#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ -#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ -#define MCR_RTS (1 << 1) /* Request to Send */ -#define MCR_DTR (1 << 0) /* Data Terminal Ready */ - -#define MSR_DCD (1 << 7) /* Data Carrier Detect */ -#define MSR_RI (1 << 6) /* Ring Indicator */ -#define MSR_DSR (1 << 5) /* Data Set Ready */ -#define MSR_CTS (1 << 4) /* Clear To Send */ -#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */ -#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */ -#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */ -#define MSR_DCTS (1 << 0) /* Delta Clear To Send */ - -/******************************************************************************/ -/* * IrSR (Infrared Selection Register) */ #define IrSR_OFFSET 0x20 diff --git a/arch/arm/include/asm/arch-pxa/regs-uart.h b/arch/arm/include/asm/arch-pxa/regs-uart.h new file mode 100644 index 000000000..355e89245 --- /dev/null +++ b/arch/arm/include/asm/arch-pxa/regs-uart.h @@ -0,0 +1,109 @@ +/* + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __REGS_UART_H__ +#define __REGS_UART_H__ + +#define FFUART_BASE 0x40100000 +#define BTUART_BASE 0x40200000 +#define STUART_BASE 0x40700000 +#define HWUART_BASE 0x41600000 + +struct pxa_uart_regs { + union { + uint32_t thr; + uint32_t rbr; + uint32_t dll; + }; + union { + uint32_t ier; + uint32_t dlh; + }; + union { + uint32_t fcr; + uint32_t iir; + }; + uint32_t lcr; + uint32_t mcr; + uint32_t lsr; + uint32_t msr; + uint32_t spr; + uint32_t isr; +}; + +#define IER_DMAE (1 << 7) +#define IER_UUE (1 << 6) +#define IER_NRZE (1 << 5) +#define IER_RTIOE (1 << 4) +#define IER_MIE (1 << 3) +#define IER_RLSE (1 << 2) +#define IER_TIE (1 << 1) +#define IER_RAVIE (1 << 0) + +#define IIR_FIFOES1 (1 << 7) +#define IIR_FIFOES0 (1 << 6) +#define IIR_TOD (1 << 3) +#define IIR_IID2 (1 << 2) +#define IIR_IID1 (1 << 1) +#define IIR_IP (1 << 0) + +#define FCR_ITL2 (1 << 7) +#define FCR_ITL1 (1 << 6) +#define FCR_RESETTF (1 << 2) +#define FCR_RESETRF (1 << 1) +#define FCR_TRFIFOE (1 << 0) +#define FCR_ITL_1 0 +#define FCR_ITL_8 (FCR_ITL1) +#define FCR_ITL_16 (FCR_ITL2) +#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1) + +#define LCR_DLAB (1 << 7) +#define LCR_SB (1 << 6) +#define LCR_STKYP (1 << 5) +#define LCR_EPS (1 << 4) +#define LCR_PEN (1 << 3) +#define LCR_STB (1 << 2) +#define LCR_WLS1 (1 << 1) +#define LCR_WLS0 (1 << 0) + +#define LSR_FIFOE (1 << 7) +#define LSR_TEMT (1 << 6) +#define LSR_TDRQ (1 << 5) +#define LSR_BI (1 << 4) +#define LSR_FE (1 << 3) +#define LSR_PE (1 << 2) +#define LSR_OE (1 << 1) +#define LSR_DR (1 << 0) + +#define MCR_LOOP (1 << 4) +#define MCR_OUT2 (1 << 3) +#define MCR_OUT1 (1 << 2) +#define MCR_RTS (1 << 1) +#define MCR_DTR (1 << 0) + +#define MSR_DCD (1 << 7) +#define MSR_RI (1 << 6) +#define MSR_DSR (1 << 5) +#define MSR_CTS (1 << 4) +#define MSR_DDCD (1 << 3) +#define MSR_TERI (1 << 2) +#define MSR_DDSR (1 << 1) +#define MSR_DCTS (1 << 0) + +#endif /* __REGS_UART_H__ */ diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h index 9adc56378..ad9a875de 100644 --- a/arch/arm/include/asm/armv7.h +++ b/arch/arm/include/asm/armv7.h @@ -31,6 +31,9 @@ #define MIDR_CORTEX_A9_R1P3 0x411FC093 #define MIDR_CORTEX_A9_R2P10 0x412FC09A +/* Cortex-A15 revisions */ +#define MIDR_CORTEX_A15_R0P0 0x410FC0F0 + /* CCSIDR */ #define CCSIDR_LINE_SIZE_OFFSET 0 #define CCSIDR_LINE_SIZE_MASK 0x7 diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h new file mode 100644 index 000000000..e5c7d2cab --- /dev/null +++ b/arch/arm/include/asm/emif.h @@ -0,0 +1,1035 @@ +/* + * OMAP44xx EMIF header + * + * Copyright (C) 2009-2010 Texas Instruments, Inc. + * + * Aneesh V <aneesh@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _EMIF_H_ +#define _EMIF_H_ +#include <asm/types.h> +#include <common.h> + +/* Base address */ +#define EMIF1_BASE 0x4c000000 +#define EMIF2_BASE 0x4d000000 + +/* Registers shifts and masks */ + +/* EMIF_MOD_ID_REV */ +#define EMIF_REG_SCHEME_SHIFT 30 +#define EMIF_REG_SCHEME_MASK (0x3 << 30) +#define EMIF_REG_MODULE_ID_SHIFT 16 +#define EMIF_REG_MODULE_ID_MASK (0xfff << 16) +#define EMIF_REG_RTL_VERSION_SHIFT 11 +#define EMIF_REG_RTL_VERSION_MASK (0x1f << 11) +#define EMIF_REG_MAJOR_REVISION_SHIFT 8 +#define EMIF_REG_MAJOR_REVISION_MASK (0x7 << 8) +#define EMIF_REG_MINOR_REVISION_SHIFT 0 +#define EMIF_REG_MINOR_REVISION_MASK (0x3f << 0) + +/* STATUS */ +#define EMIF_REG_BE_SHIFT 31 +#define EMIF_REG_BE_MASK (1 << 31) +#define EMIF_REG_DUAL_CLK_MODE_SHIFT 30 +#define EMIF_REG_DUAL_CLK_MODE_MASK (1 << 30) +#define EMIF_REG_FAST_INIT_SHIFT 29 +#define EMIF_REG_FAST_INIT_MASK (1 << 29) +#define EMIF_REG_PHY_DLL_READY_SHIFT 2 +#define EMIF_REG_PHY_DLL_READY_MASK (1 << 2) + +/* SDRAM_CONFIG */ +#define EMIF_REG_SDRAM_TYPE_SHIFT 29 +#define EMIF_REG_SDRAM_TYPE_MASK (0x7 << 29) +#define EMIF_REG_IBANK_POS_SHIFT 27 +#define EMIF_REG_IBANK_POS_MASK (0x3 << 27) +#define EMIF_REG_DDR_TERM_SHIFT 24 +#define EMIF_REG_DDR_TERM_MASK (0x7 << 24) +#define EMIF_REG_DDR2_DDQS_SHIFT 23 +#define EMIF_REG_DDR2_DDQS_MASK (1 << 23) +#define EMIF_REG_DYN_ODT_SHIFT 21 +#define EMIF_REG_DYN_ODT_MASK (0x3 << 21) +#define EMIF_REG_DDR_DISABLE_DLL_SHIFT 20 +#define EMIF_REG_DDR_DISABLE_DLL_MASK (1 << 20) +#define EMIF_REG_SDRAM_DRIVE_SHIFT 18 +#define EMIF_REG_SDRAM_DRIVE_MASK (0x3 << 18) +#define EMIF_REG_CWL_SHIFT 16 +#define EMIF_REG_CWL_MASK (0x3 << 16) +#define EMIF_REG_NARROW_MODE_SHIFT 14 +#define EMIF_REG_NARROW_MODE_MASK (0x3 << 14) +#define EMIF_REG_CL_SHIFT 10 +#define EMIF_REG_CL_MASK (0xf << 10) +#define EMIF_REG_ROWSIZE_SHIFT 7 +#define EMIF_REG_ROWSIZE_MASK (0x7 << 7) +#define EMIF_REG_IBANK_SHIFT 4 +#define EMIF_REG_IBANK_MASK (0x7 << 4) +#define EMIF_REG_EBANK_SHIFT 3 +#define EMIF_REG_EBANK_MASK (1 << 3) +#define EMIF_REG_PAGESIZE_SHIFT 0 +#define EMIF_REG_PAGESIZE_MASK (0x7 << 0) + +/* SDRAM_CONFIG_2 */ +#define EMIF_REG_CS1NVMEN_SHIFT 30 +#define EMIF_REG_CS1NVMEN_MASK (1 << 30) +#define EMIF_REG_EBANK_POS_SHIFT 27 +#define EMIF_REG_EBANK_POS_MASK (1 << 27) +#define EMIF_REG_RDBNUM_SHIFT 4 +#define EMIF_REG_RDBNUM_MASK (0x3 << 4) +#define EMIF_REG_RDBSIZE_SHIFT 0 +#define EMIF_REG_RDBSIZE_MASK (0x7 << 0) + +/* SDRAM_REF_CTRL */ +#define EMIF_REG_INITREF_DIS_SHIFT 31 +#define EMIF_REG_INITREF_DIS_MASK (1 << 31) +#define EMIF_REG_SRT_SHIFT 29 +#define EMIF_REG_SRT_MASK (1 << 29) +#define EMIF_REG_ASR_SHIFT 28 +#define EMIF_REG_ASR_MASK (1 << 28) +#define EMIF_REG_PASR_SHIFT 24 +#define EMIF_REG_PASR_MASK (0x7 << 24) +#define EMIF_REG_REFRESH_RATE_SHIFT 0 +#define EMIF_REG_REFRESH_RATE_MASK (0xffff << 0) + +/* SDRAM_REF_CTRL_SHDW */ +#define EMIF_REG_REFRESH_RATE_SHDW_SHIFT 0 +#define EMIF_REG_REFRESH_RATE_SHDW_MASK (0xffff << 0) + +/* SDRAM_TIM_1 */ +#define EMIF_REG_T_RP_SHIFT 25 +#define EMIF_REG_T_RP_MASK (0xf << 25) +#define EMIF_REG_T_RCD_SHIFT 21 +#define EMIF_REG_T_RCD_MASK (0xf << 21) +#define EMIF_REG_T_WR_SHIFT 17 +#define EMIF_REG_T_WR_MASK (0xf << 17) +#define EMIF_REG_T_RAS_SHIFT 12 +#define EMIF_REG_T_RAS_MASK (0x1f << 12) +#define EMIF_REG_T_RC_SHIFT 6 +#define EMIF_REG_T_RC_MASK (0x3f << 6) +#define EMIF_REG_T_RRD_SHIFT 3 +#define EMIF_REG_T_RRD_MASK (0x7 << 3) +#define EMIF_REG_T_WTR_SHIFT 0 +#define EMIF_REG_T_WTR_MASK (0x7 << 0) + +/* SDRAM_TIM_1_SHDW */ +#define EMIF_REG_T_RP_SHDW_SHIFT 25 +#define EMIF_REG_T_RP_SHDW_MASK (0xf << 25) +#define EMIF_REG_T_RCD_SHDW_SHIFT 21 +#define EMIF_REG_T_RCD_SHDW_MASK (0xf << 21) +#define EMIF_REG_T_WR_SHDW_SHIFT 17 +#define EMIF_REG_T_WR_SHDW_MASK (0xf << 17) +#define EMIF_REG_T_RAS_SHDW_SHIFT 12 +#define EMIF_REG_T_RAS_SHDW_MASK (0x1f << 12) +#define EMIF_REG_T_RC_SHDW_SHIFT 6 +#define EMIF_REG_T_RC_SHDW_MASK (0x3f << 6) +#define EMIF_REG_T_RRD_SHDW_SHIFT 3 +#define EMIF_REG_T_RRD_SHDW_MASK (0x7 << 3) +#define EMIF_REG_T_WTR_SHDW_SHIFT 0 +#define EMIF_REG_T_WTR_SHDW_MASK (0x7 << 0) + +/* SDRAM_TIM_2 */ +#define EMIF_REG_T_XP_SHIFT 28 +#define EMIF_REG_T_XP_MASK (0x7 << 28) +#define EMIF_REG_T_ODT_SHIFT 25 +#define EMIF_REG_T_ODT_MASK (0x7 << 25) +#define EMIF_REG_T_XSNR_SHIFT 16 +#define EMIF_REG_T_XSNR_MASK (0x1ff << 16) +#define EMIF_REG_T_XSRD_SHIFT 6 +#define EMIF_REG_T_XSRD_MASK (0x3ff << 6) +#define EMIF_REG_T_RTP_SHIFT 3 +#define EMIF_REG_T_RTP_MASK (0x7 << 3) +#define EMIF_REG_T_CKE_SHIFT 0 +#define EMIF_REG_T_CKE_MASK (0x7 << 0) + +/* SDRAM_TIM_2_SHDW */ +#define EMIF_REG_T_XP_SHDW_SHIFT 28 +#define EMIF_REG_T_XP_SHDW_MASK (0x7 << 28) +#define EMIF_REG_T_ODT_SHDW_SHIFT 25 +#define EMIF_REG_T_ODT_SHDW_MASK (0x7 << 25) +#define EMIF_REG_T_XSNR_SHDW_SHIFT 16 +#define EMIF_REG_T_XSNR_SHDW_MASK (0x1ff << 16) +#define EMIF_REG_T_XSRD_SHDW_SHIFT 6 +#define EMIF_REG_T_XSRD_SHDW_MASK (0x3ff << 6) +#define EMIF_REG_T_RTP_SHDW_SHIFT 3 +#define EMIF_REG_T_RTP_SHDW_MASK (0x7 << 3) +#define EMIF_REG_T_CKE_SHDW_SHIFT 0 +#define EMIF_REG_T_CKE_SHDW_MASK (0x7 << 0) + +/* SDRAM_TIM_3 */ +#define EMIF_REG_T_CKESR_SHIFT 21 +#define EMIF_REG_T_CKESR_MASK (0x7 << 21) +#define EMIF_REG_ZQ_ZQCS_SHIFT 15 +#define EMIF_REG_ZQ_ZQCS_MASK (0x3f << 15) +#define EMIF_REG_T_TDQSCKMAX_SHIFT 13 +#define EMIF_REG_T_TDQSCKMAX_MASK (0x3 << 13) +#define EMIF_REG_T_RFC_SHIFT 4 +#define EMIF_REG_T_RFC_MASK (0x1ff << 4) +#define EMIF_REG_T_RAS_MAX_SHIFT 0 +#define EMIF_REG_T_RAS_MAX_MASK (0xf << 0) + +/* SDRAM_TIM_3_SHDW */ +#define EMIF_REG_T_CKESR_SHDW_SHIFT 21 +#define EMIF_REG_T_CKESR_SHDW_MASK (0x7 << 21) +#define EMIF_REG_ZQ_ZQCS_SHDW_SHIFT 15 +#define EMIF_REG_ZQ_ZQCS_SHDW_MASK (0x3f << 15) +#define EMIF_REG_T_TDQSCKMAX_SHDW_SHIFT 13 +#define EMIF_REG_T_TDQSCKMAX_SHDW_MASK (0x3 << 13) +#define EMIF_REG_T_RFC_SHDW_SHIFT 4 +#define EMIF_REG_T_RFC_SHDW_MASK (0x1ff << 4) +#define EMIF_REG_T_RAS_MAX_SHDW_SHIFT 0 +#define EMIF_REG_T_RAS_MAX_SHDW_MASK (0xf << 0) + +/* LPDDR2_NVM_TIM */ +#define EMIF_REG_NVM_T_XP_SHIFT 28 +#define EMIF_REG_NVM_T_XP_MASK (0x7 << 28) +#define EMIF_REG_NVM_T_WTR_SHIFT 24 +#define EMIF_REG_NVM_T_WTR_MASK (0x7 << 24) +#define EMIF_REG_NVM_T_RP_SHIFT 20 +#define EMIF_REG_NVM_T_RP_MASK (0xf << 20) +#define EMIF_REG_NVM_T_WRA_SHIFT 16 +#define EMIF_REG_NVM_T_WRA_MASK (0xf << 16) +#define EMIF_REG_NVM_T_RRD_SHIFT 8 +#define EMIF_REG_NVM_T_RRD_MASK (0xff << 8) +#define EMIF_REG_NVM_T_RCDMIN_SHIFT 0 +#define EMIF_REG_NVM_T_RCDMIN_MASK (0xff << 0) + +/* LPDDR2_NVM_TIM_SHDW */ +#define EMIF_REG_NVM_T_XP_SHDW_SHIFT 28 +#define EMIF_REG_NVM_T_XP_SHDW_MASK (0x7 << 28) +#define EMIF_REG_NVM_T_WTR_SHDW_SHIFT 24 +#define EMIF_REG_NVM_T_WTR_SHDW_MASK (0x7 << 24) +#define EMIF_REG_NVM_T_RP_SHDW_SHIFT 20 +#define EMIF_REG_NVM_T_RP_SHDW_MASK (0xf << 20) +#define EMIF_REG_NVM_T_WRA_SHDW_SHIFT 16 +#define EMIF_REG_NVM_T_WRA_SHDW_MASK (0xf << 16) +#define EMIF_REG_NVM_T_RRD_SHDW_SHIFT 8 +#define EMIF_REG_NVM_T_RRD_SHDW_MASK (0xff << 8) +#define EMIF_REG_NVM_T_RCDMIN_SHDW_SHIFT 0 +#define EMIF_REG_NVM_T_RCDMIN_SHDW_MASK (0xff << 0) + +/* PWR_MGMT_CTRL */ +#define EMIF_REG_IDLEMODE_SHIFT 30 +#define EMIF_REG_IDLEMODE_MASK (0x3 << 30) +#define EMIF_REG_PD_TIM_SHIFT 12 +#define EMIF_REG_PD_TIM_MASK (0xf << 12) +#define EMIF_REG_DPD_EN_SHIFT 11 +#define EMIF_REG_DPD_EN_MASK (1 << 11) +#define EMIF_REG_LP_MODE_SHIFT 8 +#define EMIF_REG_LP_MODE_MASK (0x7 << 8) +#define EMIF_REG_SR_TIM_SHIFT 4 +#define EMIF_REG_SR_TIM_MASK (0xf << 4) +#define EMIF_REG_CS_TIM_SHIFT 0 +#define EMIF_REG_CS_TIM_MASK (0xf << 0) + +/* PWR_MGMT_CTRL_SHDW */ +#define EMIF_REG_PD_TIM_SHDW_SHIFT 8 +#define EMIF_REG_PD_TIM_SHDW_MASK (0xf << 8) +#define EMIF_REG_SR_TIM_SHDW_SHIFT 4 +#define EMIF_REG_SR_TIM_SHDW_MASK (0xf << 4) +#define EMIF_REG_CS_TIM_SHDW_SHIFT 0 +#define EMIF_REG_CS_TIM_SHDW_MASK (0xf << 0) + +/* LPDDR2_MODE_REG_DATA */ +#define EMIF_REG_VALUE_0_SHIFT 0 +#define EMIF_REG_VALUE_0_MASK (0x7f << 0) + +/* LPDDR2_MODE_REG_CFG */ +#define EMIF_REG_CS_SHIFT 31 +#define EMIF_REG_CS_MASK (1 << 31) +#define EMIF_REG_REFRESH_EN_SHIFT 30 +#define EMIF_REG_REFRESH_EN_MASK (1 << 30) +#define EMIF_REG_ADDRESS_SHIFT 0 +#define EMIF_REG_ADDRESS_MASK (0xff << 0) + +/* OCP_CONFIG */ +#define EMIF_REG_SYS_THRESH_MAX_SHIFT 24 +#define EMIF_REG_SYS_THRESH_MAX_MASK (0xf << 24) +#define EMIF_REG_MPU_THRESH_MAX_SHIFT 20 +#define EMIF_REG_MPU_THRESH_MAX_MASK (0xf << 20) +#define EMIF_REG_LL_THRESH_MAX_SHIFT 16 +#define EMIF_REG_LL_THRESH_MAX_MASK (0xf << 16) +#define EMIF_REG_PR_OLD_COUNT_SHIFT 0 +#define EMIF_REG_PR_OLD_COUNT_MASK (0xff << 0) + +/* OCP_CFG_VAL_1 */ +#define EMIF_REG_SYS_BUS_WIDTH_SHIFT 30 +#define EMIF_REG_SYS_BUS_WIDTH_MASK (0x3 << 30) +#define EMIF_REG_LL_BUS_WIDTH_SHIFT 28 +#define EMIF_REG_LL_BUS_WIDTH_MASK (0x3 << 28) +#define EMIF_REG_WR_FIFO_DEPTH_SHIFT 8 +#define EMIF_REG_WR_FIFO_DEPTH_MASK (0xff << 8) +#define EMIF_REG_CMD_FIFO_DEPTH_SHIFT 0 +#define EMIF_REG_CMD_FIFO_DEPTH_MASK (0xff << 0) + +/* OCP_CFG_VAL_2 */ +#define EMIF_REG_RREG_FIFO_DEPTH_SHIFT 16 +#define EMIF_REG_RREG_FIFO_DEPTH_MASK (0xff << 16) +#define EMIF_REG_RSD_FIFO_DEPTH_SHIFT 8 +#define EMIF_REG_RSD_FIFO_DEPTH_MASK (0xff << 8) +#define EMIF_REG_RCMD_FIFO_DEPTH_SHIFT 0 +#define EMIF_REG_RCMD_FIFO_DEPTH_MASK (0xff << 0) + +/* IODFT_TLGC */ +#define EMIF_REG_TLEC_SHIFT 16 +#define EMIF_REG_TLEC_MASK (0xffff << 16) +#define EMIF_REG_MT_SHIFT 14 +#define EMIF_REG_MT_MASK (1 << 14) +#define EMIF_REG_ACT_CAP_EN_SHIFT 13 +#define EMIF_REG_ACT_CAP_EN_MASK (1 << 13) +#define EMIF_REG_OPG_LD_SHIFT 12 +#define EMIF_REG_OPG_LD_MASK (1 << 12) +#define EMIF_REG_RESET_PHY_SHIFT 10 +#define EMIF_REG_RESET_PHY_MASK (1 << 10) +#define EMIF_REG_MMS_SHIFT 8 +#define EMIF_REG_MMS_MASK (1 << 8) +#define EMIF_REG_MC_SHIFT 4 +#define EMIF_REG_MC_MASK (0x3 << 4) +#define EMIF_REG_PC_SHIFT 1 +#define EMIF_REG_PC_MASK (0x7 << 1) +#define EMIF_REG_TM_SHIFT 0 +#define EMIF_REG_TM_MASK (1 << 0) + +/* IODFT_CTRL_MISR_RSLT */ +#define EMIF_REG_DQM_TLMR_SHIFT 16 +#define EMIF_REG_DQM_TLMR_MASK (0x3ff << 16) +#define EMIF_REG_CTL_TLMR_SHIFT 0 +#define EMIF_REG_CTL_TLMR_MASK (0x7ff << 0) + +/* IODFT_ADDR_MISR_RSLT */ +#define EMIF_REG_ADDR_TLMR_SHIFT 0 +#define EMIF_REG_ADDR_TLMR_MASK (0x1fffff << 0) + +/* IODFT_DATA_MISR_RSLT_1 */ +#define EMIF_REG_DATA_TLMR_31_0_SHIFT 0 +#define EMIF_REG_DATA_TLMR_31_0_MASK (0xffffffff << 0) + +/* IODFT_DATA_MISR_RSLT_2 */ +#define EMIF_REG_DATA_TLMR_63_32_SHIFT 0 +#define EMIF_REG_DATA_TLMR_63_32_MASK (0xffffffff << 0) + +/* IODFT_DATA_MISR_RSLT_3 */ +#define EMIF_REG_DATA_TLMR_66_64_SHIFT 0 +#define EMIF_REG_DATA_TLMR_66_64_MASK (0x7 << 0) + +/* PERF_CNT_1 */ +#define EMIF_REG_COUNTER1_SHIFT 0 +#define EMIF_REG_COUNTER1_MASK (0xffffffff << 0) + +/* PERF_CNT_2 */ +#define EMIF_REG_COUNTER2_SHIFT 0 +#define EMIF_REG_COUNTER2_MASK (0xffffffff << 0) + +/* PERF_CNT_CFG */ +#define EMIF_REG_CNTR2_MCONNID_EN_SHIFT 31 +#define EMIF_REG_CNTR2_MCONNID_EN_MASK (1 << 31) +#define EMIF_REG_CNTR2_REGION_EN_SHIFT 30 +#define EMIF_REG_CNTR2_REGION_EN_MASK (1 << 30) +#define EMIF_REG_CNTR2_CFG_SHIFT 16 +#define EMIF_REG_CNTR2_CFG_MASK (0xf << 16) +#define EMIF_REG_CNTR1_MCONNID_EN_SHIFT 15 +#define EMIF_REG_CNTR1_MCONNID_EN_MASK (1 << 15) +#define EMIF_REG_CNTR1_REGION_EN_SHIFT 14 +#define EMIF_REG_CNTR1_REGION_EN_MASK (1 << 14) +#define EMIF_REG_CNTR1_CFG_SHIFT 0 +#define EMIF_REG_CNTR1_CFG_MASK (0xf << 0) + +/* PERF_CNT_SEL */ +#define EMIF_REG_MCONNID2_SHIFT 24 +#define EMIF_REG_MCONNID2_MASK (0xff << 24) +#define EMIF_REG_REGION_SEL2_SHIFT 16 +#define EMIF_REG_REGION_SEL2_MASK (0x3 << 16) +#define EMIF_REG_MCONNID1_SHIFT 8 +#define EMIF_REG_MCONNID1_MASK (0xff << 8) +#define EMIF_REG_REGION_SEL1_SHIFT 0 +#define EMIF_REG_REGION_SEL1_MASK (0x3 << 0) + +/* PERF_CNT_TIM */ +#define EMIF_REG_TOTAL_TIME_SHIFT 0 +#define EMIF_REG_TOTAL_TIME_MASK (0xffffffff << 0) + +/* READ_IDLE_CTRL */ +#define EMIF_REG_READ_IDLE_LEN_SHIFT 16 +#define EMIF_REG_READ_IDLE_LEN_MASK (0xf << 16) +#define EMIF_REG_READ_IDLE_INTERVAL_SHIFT 0 +#define EMIF_REG_READ_IDLE_INTERVAL_MASK (0x1ff << 0) + +/* READ_IDLE_CTRL_SHDW */ +#define EMIF_REG_READ_IDLE_LEN_SHDW_SHIFT 16 +#define EMIF_REG_READ_IDLE_LEN_SHDW_MASK (0xf << 16) +#define EMIF_REG_READ_IDLE_INTERVAL_SHDW_SHIFT 0 +#define EMIF_REG_READ_IDLE_INTERVAL_SHDW_MASK (0x1ff << 0) + +/* IRQ_EOI */ +#define EMIF_REG_EOI_SHIFT 0 +#define EMIF_REG_EOI_MASK (1 << 0) + +/* IRQSTATUS_RAW_SYS */ +#define EMIF_REG_DNV_SYS_SHIFT 2 +#define EMIF_REG_DNV_SYS_MASK (1 << 2) +#define EMIF_REG_TA_SYS_SHIFT 1 +#define EMIF_REG_TA_SYS_MASK (1 << 1) +#define EMIF_REG_ERR_SYS_SHIFT 0 +#define EMIF_REG_ERR_SYS_MASK (1 << 0) + +/* IRQSTATUS_RAW_LL */ +#define EMIF_REG_DNV_LL_SHIFT 2 +#define EMIF_REG_DNV_LL_MASK (1 << 2) +#define EMIF_REG_TA_LL_SHIFT 1 +#define EMIF_REG_TA_LL_MASK (1 << 1) +#define EMIF_REG_ERR_LL_SHIFT 0 +#define EMIF_REG_ERR_LL_MASK (1 << 0) + +/* IRQSTATUS_SYS */ + +/* IRQSTATUS_LL */ + +/* IRQENABLE_SET_SYS */ +#define EMIF_REG_EN_DNV_SYS_SHIFT 2 +#define EMIF_REG_EN_DNV_SYS_MASK (1 << 2) +#define EMIF_REG_EN_TA_SYS_SHIFT 1 +#define EMIF_REG_EN_TA_SYS_MASK (1 << 1) +#define EMIF_REG_EN_ERR_SYS_SHIFT 0 +#define EMIF_REG_EN_ERR_SYS_MASK (1 << 0) + +/* IRQENABLE_SET_LL */ +#define EMIF_REG_EN_DNV_LL_SHIFT 2 +#define EMIF_REG_EN_DNV_LL_MASK (1 << 2) +#define EMIF_REG_EN_TA_LL_SHIFT 1 +#define EMIF_REG_EN_TA_LL_MASK (1 << 1) +#define EMIF_REG_EN_ERR_LL_SHIFT 0 +#define EMIF_REG_EN_ERR_LL_MASK (1 << 0) + +/* IRQENABLE_CLR_SYS */ + +/* IRQENABLE_CLR_LL */ + +/* ZQ_CONFIG */ +#define EMIF_REG_ZQ_CS1EN_SHIFT 31 +#define EMIF_REG_ZQ_CS1EN_MASK (1 << 31) +#define EMIF_REG_ZQ_CS0EN_SHIFT 30 +#define EMIF_REG_ZQ_CS0EN_MASK (1 << 30) +#define EMIF_REG_ZQ_DUALCALEN_SHIFT 29 +#define EMIF_REG_ZQ_DUALCALEN_MASK (1 << 29) +#define EMIF_REG_ZQ_SFEXITEN_SHIFT 28 +#define EMIF_REG_ZQ_SFEXITEN_MASK (1 << 28) +#define EMIF_REG_ZQ_ZQINIT_MULT_SHIFT 18 +#define EMIF_REG_ZQ_ZQINIT_MULT_MASK (0x3 << 18) +#define EMIF_REG_ZQ_ZQCL_MULT_SHIFT 16 +#define EMIF_REG_ZQ_ZQCL_MULT_MASK (0x3 << 16) +#define EMIF_REG_ZQ_REFINTERVAL_SHIFT 0 +#define EMIF_REG_ZQ_REFINTERVAL_MASK (0xffff << 0) + +/* TEMP_ALERT_CONFIG */ +#define EMIF_REG_TA_CS1EN_SHIFT 31 +#define EMIF_REG_TA_CS1EN_MASK (1 << 31) +#define EMIF_REG_TA_CS0EN_SHIFT 30 +#define EMIF_REG_TA_CS0EN_MASK (1 << 30) +#define EMIF_REG_TA_SFEXITEN_SHIFT 28 +#define EMIF_REG_TA_SFEXITEN_MASK (1 << 28) +#define EMIF_REG_TA_DEVWDT_SHIFT 26 +#define EMIF_REG_TA_DEVWDT_MASK (0x3 << 26) +#define EMIF_REG_TA_DEVCNT_SHIFT 24 +#define EMIF_REG_TA_DEVCNT_MASK (0x3 << 24) +#define EMIF_REG_TA_REFINTERVAL_SHIFT 0 +#define EMIF_REG_TA_REFINTERVAL_MASK (0x3fffff << 0) + +/* OCP_ERR_LOG */ +#define EMIF_REG_MADDRSPACE_SHIFT 14 +#define EMIF_REG_MADDRSPACE_MASK (0x3 << 14) +#define EMIF_REG_MBURSTSEQ_SHIFT 11 +#define EMIF_REG_MBURSTSEQ_MASK (0x7 << 11) +#define EMIF_REG_MCMD_SHIFT 8 +#define EMIF_REG_MCMD_MASK (0x7 << 8) +#define EMIF_REG_MCONNID_SHIFT 0 +#define EMIF_REG_MCONNID_MASK (0xff << 0) + +/* DDR_PHY_CTRL_1 */ +#define EMIF_REG_DDR_PHY_CTRL_1_SHIFT 4 +#define EMIF_REG_DDR_PHY_CTRL_1_MASK (0xfffffff << 4) +#define EMIF_REG_READ_LATENCY_SHIFT 0 +#define EMIF_REG_READ_LATENCY_MASK (0xf << 0) +#define EMIF_REG_DLL_SLAVE_DLY_CTRL_SHIFT 4 +#define EMIF_REG_DLL_SLAVE_DLY_CTRL_MASK (0xFF << 4) +#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT 12 +#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_MASK (0xFFFFF << 12) + +/* DDR_PHY_CTRL_1_SHDW */ +#define EMIF_REG_DDR_PHY_CTRL_1_SHDW_SHIFT 4 +#define EMIF_REG_DDR_PHY_CTRL_1_SHDW_MASK (0xfffffff << 4) +#define EMIF_REG_READ_LATENCY_SHDW_SHIFT 0 +#define EMIF_REG_READ_LATENCY_SHDW_MASK (0xf << 0) +#define EMIF_REG_DLL_SLAVE_DLY_CTRL_SHDW_SHIFT 4 +#define EMIF_REG_DLL_SLAVE_DLY_CTRL_SHDW_MASK (0xFF << 4) +#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_SHIFT 12 +#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_MASK (0xFFFFF << 12) + +/* DDR_PHY_CTRL_2 */ +#define EMIF_REG_DDR_PHY_CTRL_2_SHIFT 0 +#define EMIF_REG_DDR_PHY_CTRL_2_MASK (0xffffffff << 0) + +/* DMM */ +#define DMM_BASE 0x4E000040 + +/* Memory Adapter */ +#define MA_BASE 0x482AF040 + +/* DMM_LISA_MAP */ +#define EMIF_SYS_ADDR_SHIFT 24 +#define EMIF_SYS_ADDR_MASK (0xff << 24) +#define EMIF_SYS_SIZE_SHIFT 20 +#define EMIF_SYS_SIZE_MASK (0x7 << 20) +#define EMIF_SDRC_INTL_SHIFT 18 +#define EMIF_SDRC_INTL_MASK (0x3 << 18) +#define EMIF_SDRC_ADDRSPC_SHIFT 16 +#define EMIF_SDRC_ADDRSPC_MASK (0x3 << 16) +#define EMIF_SDRC_MAP_SHIFT 8 +#define EMIF_SDRC_MAP_MASK (0x3 << 8) +#define EMIF_SDRC_ADDR_SHIFT 0 +#define EMIF_SDRC_ADDR_MASK (0xff << 0) + +/* DMM_LISA_MAP fields */ +#define DMM_SDRC_MAP_UNMAPPED 0 +#define DMM_SDRC_MAP_EMIF1_ONLY 1 +#define DMM_SDRC_MAP_EMIF2_ONLY 2 +#define DMM_SDRC_MAP_EMIF1_AND_EMIF2 3 + +#define DMM_SDRC_INTL_NONE 0 +#define DMM_SDRC_INTL_128B 1 +#define DMM_SDRC_INTL_256B 2 +#define DMM_SDRC_INTL_512 3 + +#define DMM_SDRC_ADDR_SPC_SDRAM 0 +#define DMM_SDRC_ADDR_SPC_NVM 1 +#define DMM_SDRC_ADDR_SPC_INVALID 2 + +#define DMM_LISA_MAP_INTERLEAVED_BASE_VAL (\ + (DMM_SDRC_MAP_EMIF1_AND_EMIF2 << EMIF_SDRC_MAP_SHIFT) |\ + (DMM_SDRC_ADDR_SPC_SDRAM << EMIF_SDRC_ADDRSPC_SHIFT) |\ + (DMM_SDRC_INTL_128B << EMIF_SDRC_INTL_SHIFT) |\ + (CONFIG_SYS_SDRAM_BASE << EMIF_SYS_ADDR_SHIFT)) + +#define DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL (\ + (DMM_SDRC_MAP_EMIF1_ONLY << EMIF_SDRC_MAP_SHIFT)|\ + (DMM_SDRC_ADDR_SPC_SDRAM << EMIF_SDRC_ADDRSPC_SHIFT)|\ + (DMM_SDRC_INTL_NONE << EMIF_SDRC_INTL_SHIFT)) + +#define DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL (\ + (DMM_SDRC_MAP_EMIF2_ONLY << EMIF_SDRC_MAP_SHIFT)|\ + (DMM_SDRC_ADDR_SPC_SDRAM << EMIF_SDRC_ADDRSPC_SHIFT)|\ + (DMM_SDRC_INTL_NONE << EMIF_SDRC_INTL_SHIFT)) + +/* Trap for invalid TILER PAT entries */ +#define DMM_LISA_MAP_0_INVAL_ADDR_TRAP (\ + (0 << EMIF_SDRC_ADDR_SHIFT) |\ + (DMM_SDRC_MAP_EMIF1_ONLY << EMIF_SDRC_MAP_SHIFT)|\ + (DMM_SDRC_ADDR_SPC_INVALID << EMIF_SDRC_ADDRSPC_SHIFT)|\ + (DMM_SDRC_INTL_NONE << EMIF_SDRC_INTL_SHIFT)|\ + (0xFF << EMIF_SYS_ADDR_SHIFT)) + + +/* Reg mapping structure */ +struct emif_reg_struct { + u32 emif_mod_id_rev; + u32 emif_status; + u32 emif_sdram_config; + u32 emif_lpddr2_nvm_config; + u32 emif_sdram_ref_ctrl; + u32 emif_sdram_ref_ctrl_shdw; + u32 emif_sdram_tim_1; + u32 emif_sdram_tim_1_shdw; + u32 emif_sdram_tim_2; + u32 emif_sdram_tim_2_shdw; + u32 emif_sdram_tim_3; + u32 emif_sdram_tim_3_shdw; + u32 emif_lpddr2_nvm_tim; + u32 emif_lpddr2_nvm_tim_shdw; + u32 emif_pwr_mgmt_ctrl; + u32 emif_pwr_mgmt_ctrl_shdw; + u32 emif_lpddr2_mode_reg_data; + u32 padding1[1]; + u32 emif_lpddr2_mode_reg_data_es2; + u32 padding11[1]; + u32 emif_lpddr2_mode_reg_cfg; + u32 emif_l3_config; + u32 emif_l3_cfg_val_1; + u32 emif_l3_cfg_val_2; + u32 emif_iodft_tlgc; + u32 padding2[7]; + u32 emif_perf_cnt_1; + u32 emif_perf_cnt_2; + u32 emif_perf_cnt_cfg; + u32 emif_perf_cnt_sel; + u32 emif_perf_cnt_tim; + u32 padding3; + u32 emif_read_idlectrl; + u32 emif_read_idlectrl_shdw; + u32 padding4; + u32 emif_irqstatus_raw_sys; + u32 emif_irqstatus_raw_ll; + u32 emif_irqstatus_sys; + u32 emif_irqstatus_ll; + u32 emif_irqenable_set_sys; + u32 emif_irqenable_set_ll; + u32 emif_irqenable_clr_sys; + u32 emif_irqenable_clr_ll; + u32 padding5; + u32 emif_zq_config; + u32 emif_temp_alert_config; + u32 emif_l3_err_log; + u32 padding6[4]; + u32 emif_ddr_phy_ctrl_1; + u32 emif_ddr_phy_ctrl_1_shdw; + u32 emif_ddr_phy_ctrl_2; +}; + +struct dmm_lisa_map_regs { + u32 dmm_lisa_map_0; + u32 dmm_lisa_map_1; + u32 dmm_lisa_map_2; + u32 dmm_lisa_map_3; +}; + +#define CS0 0 +#define CS1 1 +/* The maximum frequency at which the LPDDR2 interface can operate in Hz*/ +#define MAX_LPDDR2_FREQ 400000000 /* 400 MHz */ + +/* + * The period of DDR clk is represented as numerator and denominator for + * better accuracy in integer based calculations. However, if the numerator + * and denominator are very huge there may be chances of overflow in + * calculations. So, as a trade-off keep denominator(and consequently + * numerator) within a limit sacrificing some accuracy - but not much + * If denominator and numerator are already small (such as at 400 MHz) + * no adjustment is needed + */ +#define EMIF_PERIOD_DEN_LIMIT 1000 +/* + * Maximum number of different frequencies supported by EMIF driver + * Determines the number of entries in the pointer array for register + * cache + */ +#define EMIF_MAX_NUM_FREQUENCIES 6 +/* + * Indices into the Addressing Table array. + * One entry each for all the different types of devices with different + * addressing schemes + */ +#define ADDR_TABLE_INDEX64M 0 +#define ADDR_TABLE_INDEX128M 1 +#define ADDR_TABLE_INDEX256M 2 +#define ADDR_TABLE_INDEX512M 3 +#define ADDR_TABLE_INDEX1GS4 4 +#define ADDR_TABLE_INDEX2GS4 5 +#define ADDR_TABLE_INDEX4G 6 +#define ADDR_TABLE_INDEX8G 7 +#define ADDR_TABLE_INDEX1GS2 8 +#define ADDR_TABLE_INDEX2GS2 9 +#define ADDR_TABLE_INDEXMAX 10 + +/* Number of Row bits */ +#define ROW_9 0 +#define ROW_10 1 +#define ROW_11 2 +#define ROW_12 3 +#define ROW_13 4 +#define ROW_14 5 +#define ROW_15 6 +#define ROW_16 7 + +/* Number of Column bits */ +#define COL_8 0 +#define COL_9 1 +#define COL_10 2 +#define COL_11 3 +#define COL_7 4 /*Not supported by OMAP included for completeness */ + +/* Number of Banks*/ +#define BANKS1 0 +#define BANKS2 1 +#define BANKS4 2 +#define BANKS8 3 + +/* Refresh rate in micro seconds x 10 */ +#define T_REFI_15_6 156 +#define T_REFI_7_8 78 +#define T_REFI_3_9 39 + +#define EBANK_CS1_DIS 0 +#define EBANK_CS1_EN 1 + +/* Read Latency used by the device at reset */ +#define RL_BOOT 3 +/* Read Latency for the highest frequency you want to use */ +#ifdef CONFIG_OMAP54XX +#define RL_FINAL 8 +#else +#define RL_FINAL 6 +#endif + + +/* Interleaving policies at EMIF level- between banks and Chip Selects */ +#define EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING 0 +#define EMIF_INTERLEAVING_POLICY_NO_BANK_INTERLEAVING 3 + +/* + * Interleaving policy to be used + * Currently set to MAX interleaving for better performance + */ +#define EMIF_INTERLEAVING_POLICY EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING + +/* State of the core voltage: + * This is important for some parameters such as read idle control and + * ZQ calibration timings. Timings are much stricter when voltage ramp + * is happening compared to when the voltage is stable. + * We need to calculate two sets of values for these parameters and use + * them accordingly + */ +#define LPDDR2_VOLTAGE_STABLE 0 +#define LPDDR2_VOLTAGE_RAMPING 1 + +/* Length of the forced read idle period in terms of cycles */ +#define EMIF_REG_READ_IDLE_LEN_VAL 5 + +/* Interval between forced 'read idles' */ +/* To be used when voltage is changed for DPS/DVFS - 1us */ +#define READ_IDLE_INTERVAL_DVFS (1*1000) +/* + * To be used when voltage is not scaled except by Smart Reflex + * 50us - or maximum value will do + */ +#define READ_IDLE_INTERVAL_NORMAL (50*1000) + + +/* + * Unless voltage is changing due to DVFS one ZQCS command every 50ms should + * be enough. This shoule be enough also in the case when voltage is changing + * due to smart-reflex. + */ +#define EMIF_ZQCS_INTERVAL_NORMAL_IN_US (50*1000) +/* + * If voltage is changing due to DVFS ZQCS should be performed more + * often(every 50us) + */ +#define EMIF_ZQCS_INTERVAL_DVFS_IN_US 50 + +/* The interval between ZQCL commands as a multiple of ZQCS interval */ +#define REG_ZQ_ZQCL_MULT 4 +/* The interval between ZQINIT commands as a multiple of ZQCL interval */ +#define REG_ZQ_ZQINIT_MULT 3 +/* Enable ZQ Calibration on exiting Self-refresh */ +#define REG_ZQ_SFEXITEN_ENABLE 1 +/* + * ZQ Calibration simultaneously on both chip-selects: + * Needs one calibration resistor per CS + * None of the boards that we know of have this capability + * So disabled by default + */ +#define REG_ZQ_DUALCALEN_DISABLE 0 +/* + * Enable ZQ Calibration by default on CS0. If we are asked to program + * the EMIF there will be something connected to CS0 for sure + */ +#define REG_ZQ_CS0EN_ENABLE 1 + +/* EMIF_PWR_MGMT_CTRL register */ +/* Low power modes */ +#define LP_MODE_DISABLE 0 +#define LP_MODE_CLOCK_STOP 1 +#define LP_MODE_SELF_REFRESH 2 +#define LP_MODE_PWR_DN 3 + +/* REG_DPD_EN */ +#define DPD_DISABLE 0 +#define DPD_ENABLE 1 + +/* Maximum delay before Low Power Modes */ +#define REG_CS_TIM 0xF +#define REG_SR_TIM 0xF +#define REG_PD_TIM 0xF + +/* EMIF_PWR_MGMT_CTRL register */ +#define EMIF_PWR_MGMT_CTRL (\ + ((REG_CS_TIM << EMIF_REG_CS_TIM_SHIFT) & EMIF_REG_CS_TIM_MASK)|\ + ((REG_SR_TIM << EMIF_REG_SR_TIM_SHIFT) & EMIF_REG_SR_TIM_MASK)|\ + ((REG_PD_TIM << EMIF_REG_PD_TIM_SHIFT) & EMIF_REG_PD_TIM_MASK)|\ + ((REG_PD_TIM << EMIF_REG_PD_TIM_SHIFT) & EMIF_REG_PD_TIM_MASK)|\ + ((LP_MODE_DISABLE << EMIF_REG_LP_MODE_SHIFT)\ + & EMIF_REG_LP_MODE_MASK) |\ + ((DPD_DISABLE << EMIF_REG_DPD_EN_SHIFT)\ + & EMIF_REG_DPD_EN_MASK))\ + +#define EMIF_PWR_MGMT_CTRL_SHDW (\ + ((REG_CS_TIM << EMIF_REG_CS_TIM_SHDW_SHIFT)\ + & EMIF_REG_CS_TIM_SHDW_MASK) |\ + ((REG_SR_TIM << EMIF_REG_SR_TIM_SHDW_SHIFT)\ + & EMIF_REG_SR_TIM_SHDW_MASK) |\ + ((REG_PD_TIM << EMIF_REG_PD_TIM_SHDW_SHIFT)\ + & EMIF_REG_PD_TIM_SHDW_MASK) |\ + ((REG_PD_TIM << EMIF_REG_PD_TIM_SHDW_SHIFT)\ + & EMIF_REG_PD_TIM_SHDW_MASK)) + +/* EMIF_L3_CONFIG register value */ +#define EMIF_L3_CONFIG_VAL_SYS_10_LL_0 0x0A0000FF +#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0 0x0A300000 +#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0 0x0A300000 + +/* + * Value of bits 12:31 of DDR_PHY_CTRL_1 register: + * All these fields have magic values dependent on frequency and + * determined by PHY and DLL integration with EMIF. Setting the magic + * values suggested by hw team. + */ +#define EMIF_DDR_PHY_CTRL_1_BASE_VAL 0x049FF +#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ 0x41 +#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ 0x80 +#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS 0xFF + +/* +* MR1 value: +* Burst length : 8 +* Burst type : sequential +* Wrap : enabled +* nWR : 3(default). EMIF does not do pre-charge. +* : So nWR is don't care +*/ +#define MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3 0x23 + +/* MR2 */ +#define MR2_RL3_WL1 1 +#define MR2_RL4_WL2 2 +#define MR2_RL5_WL2 3 +#define MR2_RL6_WL3 4 + +/* MR10: ZQ calibration codes */ +#define MR10_ZQ_ZQCS 0x56 +#define MR10_ZQ_ZQCL 0xAB +#define MR10_ZQ_ZQINIT 0xFF +#define MR10_ZQ_ZQRESET 0xC3 + +/* TEMP_ALERT_CONFIG */ +#define TEMP_ALERT_POLL_INTERVAL_MS 360 /* for temp gradient - 5 C/s */ +#define TEMP_ALERT_CONFIG_DEVCT_1 0 +#define TEMP_ALERT_CONFIG_DEVWDT_32 2 + +/* MR16 value: refresh full array(no partial array self refresh) */ +#define MR16_REF_FULL_ARRAY 0 + +/* + * Maximum number of entries we keep in our array of timing tables + * We need not keep all the speed bins supported by the device + * We need to keep timing tables for only the speed bins that we + * are interested in + */ +#define MAX_NUM_SPEEDBINS 4 + +/* LPDDR2 Densities */ +#define LPDDR2_DENSITY_64Mb 0 +#define LPDDR2_DENSITY_128Mb 1 +#define LPDDR2_DENSITY_256Mb 2 +#define LPDDR2_DENSITY_512Mb 3 +#define LPDDR2_DENSITY_1Gb 4 +#define LPDDR2_DENSITY_2Gb 5 +#define LPDDR2_DENSITY_4Gb 6 +#define LPDDR2_DENSITY_8Gb 7 +#define LPDDR2_DENSITY_16Gb 8 +#define LPDDR2_DENSITY_32Gb 9 + +/* LPDDR2 type */ +#define LPDDR2_TYPE_S4 0 +#define LPDDR2_TYPE_S2 1 +#define LPDDR2_TYPE_NVM 2 + +/* LPDDR2 IO width */ +#define LPDDR2_IO_WIDTH_32 0 +#define LPDDR2_IO_WIDTH_16 1 +#define LPDDR2_IO_WIDTH_8 2 + +/* Mode register numbers */ +#define LPDDR2_MR0 0 +#define LPDDR2_MR1 1 +#define LPDDR2_MR2 2 +#define LPDDR2_MR3 3 +#define LPDDR2_MR4 4 +#define LPDDR2_MR5 5 +#define LPDDR2_MR6 6 +#define LPDDR2_MR7 7 +#define LPDDR2_MR8 8 +#define LPDDR2_MR9 9 +#define LPDDR2_MR10 10 +#define LPDDR2_MR11 11 +#define LPDDR2_MR16 16 +#define LPDDR2_MR17 17 +#define LPDDR2_MR18 18 + +/* MR0 */ +#define LPDDR2_MR0_DAI_SHIFT 0 +#define LPDDR2_MR0_DAI_MASK 1 +#define LPDDR2_MR0_DI_SHIFT 1 +#define LPDDR2_MR0_DI_MASK (1 << 1) +#define LPDDR2_MR0_DNVI_SHIFT 2 +#define LPDDR2_MR0_DNVI_MASK (1 << 2) + +/* MR4 */ +#define MR4_SDRAM_REF_RATE_SHIFT 0 +#define MR4_SDRAM_REF_RATE_MASK 7 +#define MR4_TUF_SHIFT 7 +#define MR4_TUF_MASK (1 << 7) + +/* MR4 SDRAM Refresh Rate field values */ +#define SDRAM_TEMP_LESS_LOW_SHUTDOWN 0x0 +#define SDRAM_TEMP_LESS_4X_REFRESH_AND_TIMINGS 0x1 +#define SDRAM_TEMP_LESS_2X_REFRESH_AND_TIMINGS 0x2 +#define SDRAM_TEMP_NOMINAL 0x3 +#define SDRAM_TEMP_RESERVED_4 0x4 +#define SDRAM_TEMP_HIGH_DERATE_REFRESH 0x5 +#define SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS 0x6 +#define SDRAM_TEMP_VERY_HIGH_SHUTDOWN 0x7 + +#define LPDDR2_MANUFACTURER_SAMSUNG 1 +#define LPDDR2_MANUFACTURER_QIMONDA 2 +#define LPDDR2_MANUFACTURER_ELPIDA 3 +#define LPDDR2_MANUFACTURER_ETRON 4 +#define LPDDR2_MANUFACTURER_NANYA 5 +#define LPDDR2_MANUFACTURER_HYNIX 6 +#define LPDDR2_MANUFACTURER_MOSEL 7 +#define LPDDR2_MANUFACTURER_WINBOND 8 +#define LPDDR2_MANUFACTURER_ESMT 9 +#define LPDDR2_MANUFACTURER_SPANSION 11 +#define LPDDR2_MANUFACTURER_SST 12 +#define LPDDR2_MANUFACTURER_ZMOS 13 +#define LPDDR2_MANUFACTURER_INTEL 14 +#define LPDDR2_MANUFACTURER_NUMONYX 254 +#define LPDDR2_MANUFACTURER_MICRON 255 + +/* MR8 register fields */ +#define MR8_TYPE_SHIFT 0x0 +#define MR8_TYPE_MASK 0x3 +#define MR8_DENSITY_SHIFT 0x2 +#define MR8_DENSITY_MASK (0xF << 0x2) +#define MR8_IO_WIDTH_SHIFT 0x6 +#define MR8_IO_WIDTH_MASK (0x3 << 0x6) + +struct lpddr2_addressing { + u8 num_banks; + u8 t_REFI_us_x10; + u8 row_sz[2]; /* One entry each for x32 and x16 */ + u8 col_sz[2]; /* One entry each for x32 and x16 */ +}; + +/* Structure for timings from the DDR datasheet */ +struct lpddr2_ac_timings { + u32 max_freq; + u8 RL; + u8 tRPab; + u8 tRCD; + u8 tWR; + u8 tRASmin; + u8 tRRD; + u8 tWTRx2; + u8 tXSR; + u8 tXPx2; + u8 tRFCab; + u8 tRTPx2; + u8 tCKE; + u8 tCKESR; + u8 tZQCS; + u32 tZQCL; + u32 tZQINIT; + u8 tDQSCKMAXx2; + u8 tRASmax; + u8 tFAW; + +}; + +/* + * Min tCK values for some of the parameters: + * If the calculated clock cycles for the respective parameter is + * less than the corresponding min tCK value, we need to set the min + * tCK value. This may happen at lower frequencies. + */ +struct lpddr2_min_tck { + u32 tRL; + u32 tRP_AB; + u32 tRCD; + u32 tWR; + u32 tRAS_MIN; + u32 tRRD; + u32 tWTR; + u32 tXP; + u32 tRTP; + u8 tCKE; + u32 tCKESR; + u32 tFAW; +}; + +struct lpddr2_device_details { + u8 type; + u8 density; + u8 io_width; + u8 manufacturer; +}; + +struct lpddr2_device_timings { + const struct lpddr2_ac_timings **ac_timings; + const struct lpddr2_min_tck *min_tck; +}; + +/* Details of the devices connected to each chip-select of an EMIF instance */ +struct emif_device_details { + const struct lpddr2_device_details *cs0_device_details; + const struct lpddr2_device_details *cs1_device_details; + const struct lpddr2_device_timings *cs0_device_timings; + const struct lpddr2_device_timings *cs1_device_timings; +}; + +/* + * Structure containing shadow of important registers in EMIF + * The calculation function fills in this structure to be later used for + * initialization and DVFS + */ +struct emif_regs { + u32 freq; + u32 sdram_config_init; + u32 sdram_config; + u32 ref_ctrl; + u32 sdram_tim1; + u32 sdram_tim2; + u32 sdram_tim3; + u32 read_idle_ctrl; + u32 zq_config; + u32 temp_alert_config; + u32 emif_ddr_phy_ctlr_1_init; + u32 emif_ddr_phy_ctlr_1; +}; + +/* assert macros */ +#if defined(DEBUG) +#define emif_assert(c) ({ if (!(c)) for (;;); }) +#else +#define emif_assert(c) ({ if (0) hang(); }) +#endif + +#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs); +void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs); +#else +struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs, + struct lpddr2_device_details *lpddr2_dev_details); +void emif_get_device_timings(u32 emif_nr, + const struct lpddr2_device_timings **cs0_device_timings, + const struct lpddr2_device_timings **cs1_device_timings); +#endif + +#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +extern u32 *const T_num; +extern u32 *const T_den; +extern u32 *const emif_sizes; +#endif + + +#endif diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h index 254905137..2d5c3bc37 100644 --- a/arch/arm/include/asm/mach-types.h +++ b/arch/arm/include/asm/mach-types.h @@ -1104,6 +1104,7 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_THALES_ADC 3492 #define MACH_TYPE_UBISYS_P9D_EVP 3493 #define MACH_TYPE_ATDGP318 3494 +#define MACH_TYPE_OMAP5_SEVM 3777 #ifdef CONFIG_ARCH_EBSA110 # ifdef machine_arch_type @@ -14209,6 +14210,18 @@ extern unsigned int __machine_arch_type; # define machine_is_atdgp318() (0) #endif +#ifdef CONFIG_MACH_OMAP5_SEVM +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OMAP5_SEVM +# endif +# define machine_is_omap5_sevm() (machine_arch_type == MACH_TYPE_OMAP5_SEVM) +#else +# define machine_is_omap5_sevm() (0) +#endif + /* * These have not yet been registered */ diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 3f2f004af..f1562ea4a 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -37,7 +37,16 @@ void preloader_console_init(void); /* Boot device */ -#ifdef CONFIG_OMAP44XX /* OMAP4 */ +#ifdef CONFIG_OMAP54XX +#define BOOT_DEVICE_NONE 0 +#define BOOT_DEVICE_XIP 1 +#define BOOT_DEVICE_XIPWAIT 2 +#define BOOT_DEVICE_NAND 3 +#define BOOT_DEVICE_ONE_NAND 4 +#define BOOT_DEVICE_MMC1 5 +#define BOOT_DEVICE_MMC2 6 +#define BOOT_DEVICE_MMC3 7 +#elif defined(CONFIG_OMAP44XX) /* OMAP4 */ #define BOOT_DEVICE_NONE 0 #define BOOT_DEVICE_XIP 1 #define BOOT_DEVICE_XIPWAIT 2 @@ -71,10 +80,10 @@ struct spl_image_info { extern struct spl_image_info spl_image; +extern u32* boot_params_ptr; u32 omap_boot_device(void); u32 omap_boot_mode(void); - /* SPL common function s*/ void spl_parse_image_header(const struct image_header *header); void omap_rev_string(char *omap_rev_string); @@ -85,4 +94,22 @@ void spl_nand_load_image(void); /* MMC SPL functions */ void spl_mmc_load_image(void); +/* + * silicon revisions. + * Moving this to common, so that most of code can be moved to common, + * directories. + */ + +/* omap4 */ +#define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF +#define OMAP4430_ES1_0 0x44300100 +#define OMAP4430_ES2_0 0x44300200 +#define OMAP4430_ES2_1 0x44300210 +#define OMAP4430_ES2_2 0x44300220 +#define OMAP4430_ES2_3 0x44300230 +#define OMAP4460_ES1_0 0x44600100 + +/* omap5 */ +#define OMAP5430_SILICON_ID_INVALID 0 +#define OMAP5430_ES1_0 0x54300100 #endif /* _OMAP_COMMON_H_ */ diff --git a/board/armltd/integrator/arm-ebi.h b/board/armltd/integrator/arm-ebi.h new file mode 100644 index 000000000..2d85e3fe9 --- /dev/null +++ b/board/armltd/integrator/arm-ebi.h @@ -0,0 +1,62 @@ +/* + * (C) Copyright 2011 + * Linaro + * Linus Walleij <linus.walleij@linaro.org> + * Register definitions for the External Bus Interface (EBI) + * found in the ARM Integrator AP and CP reference designs + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ARM_EBI_H +#define __ARM_EBI_H + +#define EBI_BASE 0x12000000 + +#define EBI_CSR0_REG 0x00 /* CS0 = Boot ROM */ +#define EBI_CSR1_REG 0x04 /* CS1 = Flash */ +#define EBI_CSR2_REG 0x08 /* CS2 = SSRAM */ +#define EBI_CSR3_REG 0x0C /* CS3 = Expansion memory */ +/* + * The four upper bits are the waitstates for each chip select + * 0x00 = 2 cycles, 0x10 = 3 cycles, ... 0xe0 = 16 cycles, 0xf0 = 16 cycles + */ +#define EBI_CSR_WAIT_MASK 0xF0 +/* Whether memory is synchronous or asynchronous */ +#define EBI_CSR_SYNC_MASK 0xF7 +#define EBI_CSR_ASYNC 0x00 +#define EBI_CSR_SYNC 0x08 +/* Whether memory is write enabled or not */ +#define EBI_CSR_WREN_MASK 0xFB +#define EBI_CSR_WREN_DISABLE 0x00 +#define EBI_CSR_WREN_ENABLE 0x04 +/* Memory bit width for each chip select */ +#define EBI_CSR_MEMSIZE_MASK 0xFC +#define EBI_CSR_MEMSIZE_8BIT 0x00 +#define EBI_CSR_MEMSIZE_16BIT 0x01 +#define EBI_CSR_MEMSIZE_32BIT 0x02 + +/* + * The lock register need to be written with 0xa05f before anything in the + * EBI can be changed. + */ +#define EBI_LOCK_REG 0x20 +#define EBI_UNLOCK_MAGIC 0xA05F + +#endif diff --git a/board/armltd/integrator/config.mk b/board/armltd/integrator/config.mk deleted file mode 100644 index 8b57af1c5..000000000 --- a/board/armltd/integrator/config.mk +++ /dev/null @@ -1,5 +0,0 @@ -# -# image should be loaded at 0x01000000 -# - -CONFIG_SYS_TEXT_BASE = 0x01000000 diff --git a/board/armltd/integrator/integrator-sc.h b/board/armltd/integrator/integrator-sc.h new file mode 100644 index 000000000..279dc55b3 --- /dev/null +++ b/board/armltd/integrator/integrator-sc.h @@ -0,0 +1,91 @@ +/* + * (C) Copyright 2011 + * Linaro + * Linus Walleij <linus.walleij@linaro.org> + * Register definitions for the System Controller (SC) and + * the similar "CP Controller" found in the ARM Integrator/AP and + * Integrator/CP reference designs + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ARM_SC_H +#define __ARM_SC_H + +#define SC_BASE 0x11000000 + +/* + * The system controller registers + */ +#define SC_ID_OFFSET 0x00 +#define SC_OSC_OFFSET 0x04 +/* Setting this bit switches to 25 MHz mode, clear means 33 MHz */ +#define SC_OSC_DIVXY (1 << 8) +#define SC_CTRLS_OFFSET 0x08 +#define SC_CTRLC_OFFSET 0x0C +/* Set bits by writing CTRLS, clear bits by writing CTRLC */ +#define SC_CTRL_SOFTRESET (1 << 0) +#define SC_CTRL_FLASHVPP (1 << 1) +#define SC_CTRL_FLASHWP (1 << 2) +#define SC_CTRL_UART1DTR (1 << 4) +#define SC_CTRL_UART1RTS (1 << 5) +#define SC_CTRL_UART0DTR (1 << 6) +#define SC_CTRL_UART0RTS (1 << 7) +#define SC_DEC_OFFSET 0x10 +#define SC_ARB_OFFSET 0x14 +#define SC_PCI_OFFSET 0x18 +#define SC_PCI_PCIEN (1 << 0) +#define SC_PCI_PCIBINT_CLR (1 << 1) +#define SC_LOCK_OFFSET 0x1C +#define SC_LBFADDR_OFFSET 0x20 +#define SC_LBFCODE_OFFSET 0x24 + +#define SC_ID (SC_BASE + SC_ID_OFFSET) +#define SC_OSC (SC_BASE + SC_OSC_OFFSET) +#define SC_CTRLS (SC_BASE + SC_CTRLS_OFFSET) +#define SC_CTRLC (SC_BASE + SC_CTRLC_OFFSET) +#define SC_DEC (SC_BASE + SC_DEC_OFFSET) +#define SC_ARB (SC_BASE + SC_ARB_OFFSET) +#define SC_PCI (SC_BASE + SC_PCI_OFFSET) +#define SC_LOCK (SC_BASE + SC_LOCK_OFFSET) +#define SC_LBFADDR (SC_BASE + SC_LBFADDR_OFFSET) +#define SC_LBFCODE (SC_BASE + SC_LBFCODE_OFFSET) + +/* + * The Integrator/CP as a smaller set of registers, at a different + * offset - probably not to disturb old software. + */ + +#define CP_BASE 0xCB000000 + +#define CP_IDFIELD_OFFSET 0x00 +#define CP_FLASHPROG_OFFSET 0x04 +#define CP_FLASHPROG_FLVPPEN (1 << 0) +#define CP_FLASHPROG_FLWREN (1 << 1) +#define CP_FLASHPROG_FLASHSIZE (1 << 2) +#define CP_FLASHPROG_EXTRABANK (1 << 3) +#define CP_INTREG_OFFSET 0x08 +#define CP_DECODE_OFFSET 0x0C + +#define CP_IDFIELD (CP_BASE + CP_ID_OFFSET) +#define CP_FLASHPROG (CP_BASE + CP_FLASHPROG_OFFSET) +#define CP_INTREG (CP_BASE + CP_INTREG_OFFSET) +#define CP_DECODE (CP_BASE + CP_DECODE_OFFSET) + +#endif diff --git a/board/armltd/integrator/integrator.c b/board/armltd/integrator/integrator.c index c8d2bc7ba..a507c093a 100644 --- a/board/armltd/integrator/integrator.c +++ b/board/armltd/integrator/integrator.c @@ -35,6 +35,9 @@ #include <common.h> #include <netdev.h> +#include <asm/io.h> +#include "arm-ebi.h" +#include "integrator-sc.h" DECLARE_GLOBAL_DATA_PTR; @@ -55,6 +58,8 @@ void show_boot_progress(int progress) int board_init (void) { + u32 val; + /* arch number of Integrator Board */ #ifdef CONFIG_ARCH_CINTEGRATOR gd->bd->bi_arch_number = MACH_TYPE_CINTEGRATOR; @@ -72,6 +77,37 @@ extern void cm_remap(void); cm_remap(); /* remaps writeable memory to 0x00000000 */ #endif +#ifdef CONFIG_ARCH_CINTEGRATOR + /* + * Flash protection on the Integrator/CP is in a simple register + */ + val = readl(CP_FLASHPROG); + val |= (CP_FLASHPROG_FLVPPEN | CP_FLASHPROG_FLWREN); + writel(val, CP_FLASHPROG); +#else + /* + * The Integrator/AP has some special protection mechanisms + * for the external memories, first the External Bus Interface (EBI) + * then the system controller (SC). + * + * The system comes up with the flash memory non-writable and + * configuration locked. If we want U-Boot to be used for flash + * access we cannot have the flash memory locked. + */ + writel(EBI_UNLOCK_MAGIC, EBI_BASE + EBI_LOCK_REG); + val = readl(EBI_BASE + EBI_CSR1_REG); + val &= EBI_CSR_WREN_MASK; + val |= EBI_CSR_WREN_ENABLE; + writel(val, EBI_BASE + EBI_CSR1_REG); + writel(0, EBI_BASE + EBI_LOCK_REG); + + /* + * Set up the system controller to remove write protection from + * the flash memory and enable Vpp + */ + writel(SC_CTRL_FLASHVPP | SC_CTRL_FLASHWP, SC_CTRLS); +#endif + icache_enable (); return 0; @@ -86,21 +122,30 @@ int misc_init_r (void) return (0); } +/* + * The Integrator remaps the Flash memory to 0x00000000 and executes U-Boot + * from there, which means we cannot test the RAM underneath the ROM at this + * point. It will be unmapped later on, when we are executing from the + * relocated in RAM U-Boot. We simply assume that this RAM is usable if the + * RAM on higher addresses works fine. + */ +#define REMAPPED_FLASH_SZ 0x40000 + int dram_init (void) { gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; #ifdef CONFIG_CM_SPD_DETECT { extern void dram_query(void); - unsigned long cm_reg_sdram; - unsigned long sdram_shift; + u32 cm_reg_sdram; + u32 sdram_shift; dram_query(); /* Assembler accesses to CM registers */ /* Queries the SPD values */ /* Obtain the SDRAM size from the CM SDRAM register */ - cm_reg_sdram = *(volatile ulong *)(CM_BASE + OS_SDRAM); + cm_reg_sdram = readl(CM_BASE + OS_SDRAM); /* Register SDRAM size * * 0xXXXXXXbbb000bb 16 MB @@ -110,16 +155,18 @@ extern void dram_query(void); * 0xXXXXXXbbb100bb 256 MB * */ - sdram_shift = ((cm_reg_sdram & 0x0000001C)/4)%4; - gd->bd->bi_dram[0].size = 0x01000000 << sdram_shift; - gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, + sdram_shift = ((cm_reg_sdram & 0x0000001C)/4)%4; + gd->ram_size = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE + + REMAPPED_FLASH_SZ, 0x01000000 << sdram_shift); } #else - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE + + REMAPPED_FLASH_SZ, PHYS_SDRAM_1_SIZE); #endif /* CM_SPD_DETECT */ + /* We only have one bank of RAM, set it to whatever was detected */ + gd->bd->bi_dram[0].size = gd->ram_size; return 0; } diff --git a/board/csb226/csb226.c b/board/csb226/csb226.c deleted file mode 100644 index dd29e6265..000000000 --- a/board/csb226/csb226.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - * (C) Copyright 2002 - * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de - * Kyle Harris, Nexus Technologies, Inc., kharris@nexus-tech.net - * Marius Groeger, Sysgo Real-Time Solutions GmbH, mgroeger@sysgo.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> -#include <asm/arch/pxa-regs.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_SHOW_BOOT_PROGRESS -# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) -#else -# define SHOW_BOOT_PROGRESS(arg) -#endif - -/** - * misc_init_r: - misc initialisation routines - */ - -int misc_init_r(void) -{ -#if 0 - uchar *str; - - /* determine if the software update key is pressed during startup */ - /* not ported yet... */ - if (GPLR0 & 0x00000800) { - printf("using bootcmd_normal (sw-update button not pressed)\n"); - str = getenv("bootcmd_normal"); - } else { - printf("using bootcmd_update (sw-update button pressed)\n"); - str = getenv("bootcmd_update"); - } - - setenv("bootcmd",str); -#endif - return 0; -} - - -/** - * board_init: - setup some data structures - * - * @return: 0 in case of success - */ - -int board_init (void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - /* arch number of CSB226 board */ - gd->bd->bi_arch_number = MACH_TYPE_CSB226; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - return 0; -} - - -extern void pxa_dram_init(void); -int dram_init(void) -{ - pxa_dram_init(); - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -/** - * csb226_set_led: - switch LEDs on or off - * - * @param led: LED to switch (0,1,2) - * @param state: switch on (1) or off (0) - */ - -void csb226_set_led(int led, int state) -{ - switch(led) { - - case 0: if (state==1) { - writel(readl(GPCR0) | CSB226_USER_LED0, GPCR0); - } else if (state==0) { - writel(readl(GPSR0) | CSB226_USER_LED0, GPSR0); - } - break; - - case 1: if (state==1) { - writel(readl(GPCR0) | CSB226_USER_LED1, GPCR0); - } else if (state==0) { - writel(readl(GPSR0) | CSB226_USER_LED1, GPSR0); - } - break; - - case 2: if (state==1) { - writel(readl(GPCR0) | CSB226_USER_LED2, GPCR0); - } else if (state==0) { - writel(readl(GPSR0) | CSB226_USER_LED2, GPSR0); - } - break; - } - - return; -} - - -/** - * show_boot_progress: - indicate state of the boot process - * - * @param status: Status number - see README for details. - * - * The CSB226 does only have 3 LEDs, so we switch them on at the most - * important states (1, 5, 15). - */ - -void show_boot_progress (int status) -{ - switch(status) { - case 1: csb226_set_led(0,1); break; - case 5: csb226_set_led(1,1); break; - case 15: csb226_set_led(2,1); break; - } - - return; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_CS8900 - rc = cs8900_initialize(0, CONFIG_CS8900_BASE); -#endif - return rc; -} -#endif diff --git a/board/csb226/flash.c b/board/csb226/flash.c deleted file mode 100644 index e10347067..000000000 --- a/board/csb226/flash.c +++ /dev/null @@ -1,368 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de> - * - * (C) Copyright 2003 (2 x 16 bit Flash bank patches) - * Rolf Peukert, IMMS gGmbH, <rolf.peukert@imms.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/pxa-regs.h> - -#define FLASH_BANK_SIZE 0x02000000 -#define MAIN_SECT_SIZE 0x40000 /* 2x16 = 256k per sector */ - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - - -/** - * flash_init: - initialize data structures for flash chips - * - * @return: size of the flash - */ - -ulong flash_init(void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - flash_info[i].flash_id = - (INTEL_MANUFACT & FLASH_VENDMASK) | - (INTEL_ID_28F128J3 & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - - switch (i) { - case 0: - flashbase = PHYS_FLASH_1; - break; - default: - panic("configured too many flash banks!\n"); - break; - } - for (j = 0; j < flash_info[i].sector_count; j++) { - flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, - &flash_info[0]); - - return size; -} - - -/** - * flash_print_info: - print information about the flash situation - */ - -void flash_print_info (flash_info_t *info) -{ - int i, j; - - for (j=0; j<CONFIG_SYS_MAX_FLASH_BANKS; j++) { - - switch (info->flash_id & FLASH_VENDMASK) { - case (INTEL_MANUFACT & FLASH_VENDMASK): - printf ("Intel: "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (INTEL_ID_28F128J3 & FLASH_TYPEMASK): - printf("28F128J3 (128Mbit)\n"); - break; - default: - printf("Unknown Chip Type\n"); - return; - } - - printf(" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) printf ("\n "); - - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - info++; - } -} - - -/** - * flash_erase: - erase flash sectors - */ - -int flash_erase(flash_info_t *info, int s_first, int s_last) -{ - int flag, prot, sect; - int rc = ERR_OK; - ulong start; - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } - - if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK)) - return ERR_UNKNOWN_FLASH_VENDOR; - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) prot++; - } - - if (prot) return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - - flag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last && !ctrlc(); sect++) { - - printf("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - if (info->protect[sect] == 0) { /* not protected */ - u32 * volatile addr = (u32 * volatile)(info->start[sect]); - - /* erase sector: */ - /* The strata flashs are aligned side by side on */ - /* the data bus, so we have to write the commands */ - /* to both chips here: */ - - *addr = 0x00200020; /* erase setup */ - *addr = 0x00D000D0; /* erase confirm */ - - while ((*addr & 0x00800080) != 0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - *addr = 0x00B000B0; /* suspend erase*/ - *addr = 0x00FF00FF; /* read mode */ - rc = ERR_TIMOUT; - goto outahere; - } - } - *addr = 0x00500050; /* clear status register cmd. */ - *addr = 0x00FF00FF; /* reset to read mode */ - } - printf("ok.\n"); - } - if (ctrlc()) printf("User Interrupt!\n"); - -outahere: - /* allow flash to settle - wait 10 ms */ - udelay_masked(10000); - - if (flag) enable_interrupts(); - - return rc; -} - -/** - * write_long: - copy memory to flash, assume a bank of 2 devices with 16bit each - */ - -static int write_long (flash_info_t *info, ulong dest, ulong data) -{ - u32 * volatile addr = (u32 * volatile)dest, val; - int rc = ERR_OK; - int flag; - ulong start; - - /* read array command - just for the case... */ - *addr = 0x00FF00FF; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) return ERR_NOT_ERASED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - flag = disable_interrupts(); - - /* clear status register command */ - *addr = 0x00500050; - - /* program set-up command */ - *addr = 0x00400040; - - /* latch address/data */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait while polling the status register */ - while(((val = *addr) & 0x00800080) != 0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - rc = ERR_TIMOUT; - /* suspend program command */ - *addr = 0x00B000B0; - goto outahere; - } - } - - /* check for errors */ - if(val & 0x001A001A) { - printf("\nFlash write error %02x at address %08lx\n", - (int)val, (unsigned long)dest); - if(val & 0x00080008) { - printf("Voltage range error.\n"); - rc = ERR_PROG_ERROR; - goto outahere; - } - if(val & 0x00020002) { - printf("Device protect error.\n"); - rc = ERR_PROTECTED; - goto outahere; - } - if(val & 0x00100010) { - printf("Programming error.\n"); - rc = ERR_PROG_ERROR; - goto outahere; - } - rc = ERR_PROG_ERROR; - goto outahere; - } - -outahere: - /* read array command */ - *addr = 0x00FF00FF; - if (flag) enable_interrupts(); - - return rc; -} - - -/** - * write_buf: - Copy memory to flash. - * - * @param info: - * @param src: source of copy transaction - * @param addr: where to copy to - * @param cnt: number of bytes to copy - * - * @return error code - */ - -/* "long" version, uses 32bit words */ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp; - ulong data; - int l; - int i, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 24); - } - for (; i<4 && cnt>0; ++i) { - data = (data >> 8) | (*src++ << 24); - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 24); - } - - if ((rc = write_long(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = *((ulong*)src); - if ((rc = write_long(info, wp, data)) != 0) { - return (rc); - } - src += 4; - wp += 4; - cnt -= 4; - } - - if (cnt == 0) return ERR_OK; - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 24); - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 24); - } - - return write_long(info, wp, data); -} diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c index 665aedf0b..c41f11d60 100644 --- a/board/davedenx/qong/qong.c +++ b/board/davedenx/qong/qong.c @@ -231,7 +231,7 @@ static void board_nand_setup(void) mxc_setup_weimcs(3, &cs3); - __REG(IOMUXC_GPR) |= 1 << 13; + mx31_set_gpr(MUX_SDCTL_CSD1_SEL, 1); mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_WP, MUX_CTL_IN_GPIO)); mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_CE, MUX_CTL_IN_GPIO)); diff --git a/board/davinci/dm6467evm/dm6467evm.c b/board/davinci/dm6467evm/dm6467evm.c index 1a01c3ce2..ac82d5cf3 100644 --- a/board/davinci/dm6467evm/dm6467evm.c +++ b/board/davinci/dm6467evm/dm6467evm.c @@ -24,6 +24,26 @@ DECLARE_GLOBAL_DATA_PTR; +#define REV_DM6467EVM 0 +#define REV_DM6467TEVM 1 +/* + * get_board_rev() - setup to pass kernel board revision information + * Returns: + * bit[0-3] System clock frequency + * 0000b - 27 MHz + * 0001b - 33 MHz + */ +u32 get_board_rev(void) +{ + +#ifdef DAVINCI_DM6467TEVM + return REV_DM6467TEVM; +#else + return REV_DM6467EVM; +#endif + +} + int board_init(void) { gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM6467_EVM; diff --git a/board/denx/m28evk/Makefile b/board/denx/m28evk/Makefile new file mode 100644 index 000000000..b6f002fe3 --- /dev/null +++ b/board/denx/m28evk/Makefile @@ -0,0 +1,56 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +ifndef CONFIG_SPL_BUILD +COBJS := m28evk.o +endif + +ifdef CONFIG_SPL_BUILD +COBJS := mem_init.o mmc_boot.o power_init.o memsize.o +endif + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +all: $(ALL) + +ifdef CONFIG_SPL_BUILD +memsize.c: + ln -sf $(TOPDIR)/common/memsize.c $@ +endif + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/omap4/sys_info.c b/board/denx/m28evk/m28_init.h index b9e57659f..98d363199 100644 --- a/arch/arm/cpu/armv7/omap4/sys_info.c +++ b/board/denx/m28evk/m28_init.h @@ -1,10 +1,11 @@ /* - * (C) Copyright 2010 - * Texas Instruments, <www.ti.com> + * Freescale i.MX28 SPL functions * - * Author : - * Aneesh V <aneesh@ti.com> - * Steve Sakoman <steve@sakoman.com> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -13,7 +14,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -22,32 +23,19 @@ * MA 02111-1307 USA */ -#include <common.h> -#include <asm/arch/sys_proto.h> +#ifndef __M28_INIT_H__ +#define __M28_INIT_H__ -/* - * get_device_type(): tell if GP/HS/EMU/TST - */ -u32 get_device_type(void) -{ - return 0; -} +void early_delay(int delay); -/* - * get_board_rev() - get board revision - */ -u32 get_board_rev(void) -{ - return 0x20; -} +void mx28_power_init(void); -/* - * Print CPU information - */ -int print_cpuinfo(void) -{ +#ifdef CONFIG_SPL_MX28_PSWITCH_WAIT +void mx28_power_wait_pswitch(void); +#else +static inline void mx28_power_wait_pswitch(void) { } +#endif - puts("CPU : OMAP4430\n"); +void mx28_mem_init(void); - return 0; -} +#endif /* __M28_INIT_H__ */ diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c new file mode 100644 index 000000000..8cf3dc9d4 --- /dev/null +++ b/board/denx/m28evk/m28evk.c @@ -0,0 +1,216 @@ +/* + * DENX M28 module + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/iomux-mx28.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <linux/mii.h> +#include <miiphy.h> +#include <netdev.h> +#include <errno.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Functions + */ +int board_early_init_f(void) +{ + /* IO0 clock at 480MHz */ + mx28_set_ioclk(MXC_IOCLK0, 480000); + /* IO1 clock at 480MHz */ + mx28_set_ioclk(MXC_IOCLK1, 480000); + + /* SSP0 clock at 96MHz */ + mx28_set_sspclk(MXC_SSPCLK0, 96000, 0); + /* SSP2 clock at 96MHz */ + mx28_set_sspclk(MXC_SSPCLK2, 96000, 0); + +#ifdef CONFIG_CMD_USB + mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT); + mxs_iomux_setup_pad(MX28_PAD_AUART3_TX__GPIO_3_13 | + MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP); + gpio_direction_output(MX28_PAD_AUART3_TX__GPIO_3_13, 0); +#endif + + return 0; +} + +int board_init(void) +{ + /* Adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +#define HW_DIGCTRL_SCRATCH0 0x8001c280 +#define HW_DIGCTRL_SCRATCH1 0x8001c290 +int dram_init(void) +{ + uint32_t sz[2]; + + sz[0] = readl(HW_DIGCTRL_SCRATCH0); + sz[1] = readl(HW_DIGCTRL_SCRATCH1); + + if (sz[0] != sz[1]) { + printf("MX28:\n" + "Error, the RAM size in HW_DIGCTRL_SCRATCH0 and\n" + "HW_DIGCTRL_SCRATCH1 is not the same. Please\n" + "verify these two registers contain valid RAM size!\n"); + hang(); + } + + gd->ram_size = sz[0]; + return 0; +} + +#ifdef CONFIG_CMD_MMC +static int m28_mmc_wp(int id) +{ + if (id != 0) { + printf("MXS MMC: Invalid card selected (card id = %d)\n", id); + return 1; + } + + return gpio_get_value(MX28_PAD_AUART2_CTS__GPIO_3_10); +} + +int board_mmc_init(bd_t *bis) +{ + /* Configure WP as output */ + gpio_direction_input(MX28_PAD_AUART2_CTS__GPIO_3_10); + + return mxsmmc_initialize(bis, 0, m28_mmc_wp); +} +#endif + +#ifdef CONFIG_CMD_NET + +#define MII_OPMODE_STRAP_OVERRIDE 0x16 +#define MII_PHY_CTRL1 0x1e +#define MII_PHY_CTRL2 0x1f + +int fecmxc_mii_postcall(int phy) +{ + miiphy_write("FEC1", phy, MII_BMCR, 0x9000); + miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202); + if (phy == 3) + miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8180); + return 0; +} + +int board_eth_init(bd_t *bis) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct eth_device *dev; + int ret; + + ret = cpu_eth_init(bis); + + clrsetbits_le32(&clkctrl_regs->hw_clkctrl_enet, + CLKCTRL_ENET_TIME_SEL_MASK | CLKCTRL_ENET_CLK_OUT_EN, + CLKCTRL_ENET_TIME_SEL_RMII_CLK); + + ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE); + if (ret) { + printf("FEC MXS: Unable to init FEC0\n"); + return ret; + } + + ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE); + if (ret) { + printf("FEC MXS: Unable to init FEC1\n"); + return ret; + } + + dev = eth_get_dev_by_name("FEC0"); + if (!dev) { + printf("FEC MXS: Unable to get FEC0 device entry\n"); + return -EINVAL; + } + + ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall); + if (ret) { + printf("FEC MXS: Unable to register FEC0 mii postcall\n"); + return ret; + } + + dev = eth_get_dev_by_name("FEC1"); + if (!dev) { + printf("FEC MXS: Unable to get FEC1 device entry\n"); + return -EINVAL; + } + + ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall); + if (ret) { + printf("FEC MXS: Unable to register FEC1 mii postcall\n"); + return ret; + } + + return ret; +} + +#ifdef CONFIG_M28_FEC_MAC_IN_OCOTP + +#define MXS_OCOTP_MAX_TIMEOUT 1000000 +void imx_get_mac_from_fuse(char *mac) +{ + struct mx28_ocotp_regs *ocotp_regs = + (struct mx28_ocotp_regs *)MXS_OCOTP_BASE; + uint32_t data; + + memset(mac, 0, 6); + + writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set); + + if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY, + MXS_OCOTP_MAX_TIMEOUT)) { + printf("MXS FEC: Can't get MAC from OCOTP\n"); + return; + } + + data = readl(&ocotp_regs->hw_ocotp_cust0); + + mac[0] = 0x00; + mac[1] = 0x04; + mac[2] = (data >> 24) & 0xff; + mac[3] = (data >> 16) & 0xff; + mac[4] = (data >> 8) & 0xff; + mac[5] = data & 0xff; +} +#else +void imx_get_mac_from_fuse(char *mac) +{ + memset(mac, 0, 6); +} +#endif + +#endif diff --git a/board/denx/m28evk/mem_init.c b/board/denx/m28evk/mem_init.c new file mode 100644 index 000000000..17d1f9b6a --- /dev/null +++ b/board/denx/m28evk/mem_init.c @@ -0,0 +1,240 @@ +/* + * Freescale i.MX28 RAM init + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <asm/io.h> +#include <asm/arch/iomux-mx28.h> +#include <asm/arch/imx-regs.h> + +#include "m28_init.h" + +uint32_t dram_vals[] = { + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000100, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00010101, 0x01010101, 0x000f0f01, 0x0f02020a, + 0x00000000, 0x00010101, 0x00000100, 0x00000100, 0x00000000, + 0x00000002, 0x01010000, 0x05060302, 0x06005003, 0x0a0000c8, + 0x02009c40, 0x0000030c, 0x0036a609, 0x031a0612, 0x02030202, + 0x00c8001c, 0x00000000, 0x00000000, 0x00012100, 0xffff0303, + 0x00012100, 0xffff0303, 0x00012100, 0xffff0303, 0x00012100, + 0xffff0303, 0x00000003, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000612, 0x01000F02, 0x06120612, 0x00000200, + 0x00020007, 0xf5014b27, 0xf5014b27, 0xf5014b27, 0xf5014b27, + 0x07000300, 0x07000300, 0x07000300, 0x07000300, 0x00000006, + 0x00000000, 0x00000000, 0x01000000, 0x01020408, 0x08040201, + 0x000f1133, 0x00000000, 0x00001f04, 0x00001f04, 0x00001f04, + 0x00001f04, 0x00001f04, 0x00001f04, 0x00001f04, 0x00001f04, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00010000, 0x00020304, 0x00000004, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x01010000, 0x01000000, 0x03030000, 0x00010303, + 0x01020202, 0x00000000, 0x02040303, 0x21002103, 0x00061200, + 0x06120612, 0x04320432, 0x04320432, 0x00040004, 0x00040004, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00010001 +}; + +void init_m28_200mhz_ddr2(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(dram_vals); i++) + writel(dram_vals[i], MXS_DRAM_BASE + (4 * i)); +} + +void mx28_mem_init_clock(void) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + + /* Gate EMI clock */ + writel(CLKCTRL_FRAC0_CLKGATEEMI, + &clkctrl_regs->hw_clkctrl_frac0_set); + + /* EMI = 205MHz */ + writel(CLKCTRL_FRAC0_EMIFRAC_MASK, + &clkctrl_regs->hw_clkctrl_frac0_set); + writel((0x2a << CLKCTRL_FRAC0_EMIFRAC_OFFSET) & + CLKCTRL_FRAC0_EMIFRAC_MASK, + &clkctrl_regs->hw_clkctrl_frac0_clr); + + /* Ungate EMI clock */ + writel(CLKCTRL_FRAC0_CLKGATEEMI, + &clkctrl_regs->hw_clkctrl_frac0_clr); + + early_delay(11000); + + writel((2 << CLKCTRL_EMI_DIV_EMI_OFFSET) | + (1 << CLKCTRL_EMI_DIV_XTAL_OFFSET), + &clkctrl_regs->hw_clkctrl_emi); + + /* Unbypass EMI */ + writel(CLKCTRL_CLKSEQ_BYPASS_EMI, + &clkctrl_regs->hw_clkctrl_clkseq_clr); + + early_delay(10000); +} + +void mx28_mem_setup_cpu_and_hbus(void) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + + /* CPU = 454MHz and ungate CPU clock */ + clrsetbits_le32(&clkctrl_regs->hw_clkctrl_frac0, + CLKCTRL_FRAC0_CPUFRAC_MASK | CLKCTRL_FRAC0_CLKGATECPU, + 19 << CLKCTRL_FRAC0_CPUFRAC_OFFSET); + + /* Set CPU bypass */ + writel(CLKCTRL_CLKSEQ_BYPASS_CPU, + &clkctrl_regs->hw_clkctrl_clkseq_set); + + /* HBUS = 151MHz */ + writel(CLKCTRL_HBUS_DIV_MASK, &clkctrl_regs->hw_clkctrl_hbus_set); + writel(((~3) << CLKCTRL_HBUS_DIV_OFFSET) & CLKCTRL_HBUS_DIV_MASK, + &clkctrl_regs->hw_clkctrl_hbus_clr); + + early_delay(10000); + + /* CPU clock divider = 1 */ + clrsetbits_le32(&clkctrl_regs->hw_clkctrl_cpu, + CLKCTRL_CPU_DIV_CPU_MASK, 1); + + /* Disable CPU bypass */ + writel(CLKCTRL_CLKSEQ_BYPASS_CPU, + &clkctrl_regs->hw_clkctrl_clkseq_clr); +} + +void mx28_mem_setup_vdda(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + + writel((0xc << POWER_VDDACTRL_TRG_OFFSET) | + (0x7 << POWER_VDDACTRL_BO_OFFSET_OFFSET) | + POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW, + &power_regs->hw_power_vddactrl); +} + +void mx28_mem_setup_vddd(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + + writel((0x1c << POWER_VDDDCTRL_TRG_OFFSET) | + (0x7 << POWER_VDDDCTRL_BO_OFFSET_OFFSET) | + POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW, + &power_regs->hw_power_vdddctrl); +} + +#define HW_DIGCTRL_SCRATCH0 0x8001c280 +#define HW_DIGCTRL_SCRATCH1 0x8001c290 +void data_abort_memdetect_handler(void) __attribute__((naked)); +void data_abort_memdetect_handler(void) +{ + asm volatile("subs pc, r14, #4"); +} + +void mx28_mem_get_size(void) +{ + uint32_t sz, da; + uint32_t *vt = (uint32_t *)0x20; + + /* Replace the DABT handler. */ + da = vt[4]; + vt[4] = (uint32_t)&data_abort_memdetect_handler; + + sz = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); + writel(sz, HW_DIGCTRL_SCRATCH0); + writel(sz, HW_DIGCTRL_SCRATCH1); + + /* Restore the old DABT handler. */ + vt[4] = da; +} + +void mx28_mem_init(void) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mx28_pinctrl_regs *pinctrl_regs = + (struct mx28_pinctrl_regs *)MXS_PINCTRL_BASE; + + /* Set DDR2 mode */ + writel(PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2, + &pinctrl_regs->hw_pinctrl_emi_ds_ctrl_set); + + /* Power up PLL0 */ + writel(CLKCTRL_PLL0CTRL0_POWER, + &clkctrl_regs->hw_clkctrl_pll0ctrl0_set); + + early_delay(11000); + + mx28_mem_init_clock(); + + mx28_mem_setup_vdda(); + + /* + * Configure the DRAM registers + */ + + /* Clear START bit from DRAM_CTL16 */ + clrbits_le32(MXS_DRAM_BASE + 0x40, 1); + + init_m28_200mhz_ddr2(); + + /* Clear SREFRESH bit from DRAM_CTL17 */ + clrbits_le32(MXS_DRAM_BASE + 0x44, 1); + + /* Set START bit in DRAM_CTL16 */ + setbits_le32(MXS_DRAM_BASE + 0x40, 1); + + /* Wait for bit 20 (DRAM init complete) in DRAM_CTL58 */ + while (!(readl(MXS_DRAM_BASE + 0xe8) & (1 << 20))) + ; + + mx28_mem_setup_vddd(); + + early_delay(10000); + + mx28_mem_setup_cpu_and_hbus(); + + mx28_mem_get_size(); +} diff --git a/board/denx/m28evk/mmc_boot.c b/board/denx/m28evk/mmc_boot.c new file mode 100644 index 000000000..86d3ab5e1 --- /dev/null +++ b/board/denx/m28evk/mmc_boot.c @@ -0,0 +1,273 @@ +/* + * Freescale i.MX28 Boot setup + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <asm/io.h> +#include <asm/arch/iomux-mx28.h> + +#include "m28_init.h" + +/* + * This delay function is intended to be used only in early stage of boot, where + * clock are not set up yet. The timer used here is reset on every boot and + * takes a few seconds to roll. The boot doesn't take that long, so to keep the + * code simple, it doesn't take rolling into consideration. + */ +#define HW_DIGCTRL_MICROSECONDS 0x8001c0c0 +void early_delay(int delay) +{ + uint32_t st = readl(HW_DIGCTRL_MICROSECONDS); + st += delay; + while (st > readl(HW_DIGCTRL_MICROSECONDS)) + ; +} + +#define MUX_CONFIG_LED (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) +#define MUX_CONFIG_LCD (MXS_PAD_3V3 | MXS_PAD_4MA) +#define MUX_CONFIG_TSC (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) +#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP) +#define MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP) +#define MUX_CONFIG_GPMI (MXS_PAD_1V8 | MXS_PAD_4MA | MXS_PAD_NOPULL) +#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP) +#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL) + +const iomux_cfg_t iomux_setup[] = { + /* LED */ + MX28_PAD_ENET0_RXD3__GPIO_4_10 | MUX_CONFIG_LED, + + /* framebuffer */ + MX28_PAD_LCD_D00__LCD_D0 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D01__LCD_D1 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D02__LCD_D2 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D03__LCD_D3 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D04__LCD_D4 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D05__LCD_D5 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D06__LCD_D6 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D07__LCD_D7 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D08__LCD_D8 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D09__LCD_D9 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D18__LCD_D18 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D19__LCD_D19 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D20__LCD_D20 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D21__LCD_D21 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D22__LCD_D22 | MUX_CONFIG_LCD, + MX28_PAD_LCD_D23__LCD_D23 | MUX_CONFIG_LCD, + MX28_PAD_LCD_RD_E__LCD_VSYNC | MUX_CONFIG_LCD, + MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MUX_CONFIG_LCD, + MX28_PAD_LCD_RS__LCD_DOTCLK | MUX_CONFIG_LCD, + MX28_PAD_LCD_CS__LCD_CS | MUX_CONFIG_LCD, + MX28_PAD_LCD_VSYNC__LCD_VSYNC | MUX_CONFIG_LCD, + MX28_PAD_LCD_HSYNC__LCD_HSYNC | MUX_CONFIG_LCD, + MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MUX_CONFIG_LCD, + MX28_PAD_LCD_ENABLE__GPIO_1_31 | MUX_CONFIG_LCD, + MX28_PAD_LCD_RESET__GPIO_3_30 | MUX_CONFIG_LCD, + + /* UART1 */ + MX28_PAD_PWM0__DUART_RX, + MX28_PAD_PWM1__DUART_TX, + MX28_PAD_AUART0_TX__DUART_RTS, + MX28_PAD_AUART0_RX__DUART_CTS, + + /* UART2 */ + MX28_PAD_AUART1_RX__AUART1_RX, + MX28_PAD_AUART1_TX__AUART1_TX, + MX28_PAD_AUART1_RTS__AUART1_RTS, + MX28_PAD_AUART1_CTS__AUART1_CTS, + + /* CAN */ + MX28_PAD_GPMI_RDY2__CAN0_TX, + MX28_PAD_GPMI_RDY3__CAN0_RX, + + /* I2C */ + MX28_PAD_I2C0_SCL__I2C0_SCL, + MX28_PAD_I2C0_SDA__I2C0_SDA, + + /* TSC2007 */ + MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MUX_CONFIG_TSC, + + /* MMC0 */ + MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DATA4__SSP0_D4 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DATA5__SSP0_D5 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DATA6__SSP0_D6 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DATA7__SSP0_D7 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | + (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL), + MX28_PAD_SSP0_SCK__SSP0_SCK | + (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL), + MX28_PAD_PWM3__GPIO_3_28 | MUX_CONFIG_SSP0, /* Power .. FIXME */ + MX28_PAD_AUART2_CTS__GPIO_3_10, /* WP ... FIXME */ + + /* GPMI NAND */ + MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_RDN__GPMI_RDN | + (MXS_PAD_1V8 | MXS_PAD_8MA | MXS_PAD_PULLUP), + MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI, + + /* FEC Ethernet */ + MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET, + MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET, + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET, + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET, + MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET, + MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET, + MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET, + MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET, + MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET, + + MX28_PAD_ENET0_COL__ENET1_TX_EN | MUX_CONFIG_ENET, + MX28_PAD_ENET0_CRS__ENET1_RX_EN | MUX_CONFIG_ENET, + MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MUX_CONFIG_ENET, + MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET, + MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET, + MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET, + + /* I2C */ + MX28_PAD_I2C0_SCL__I2C0_SCL, + MX28_PAD_I2C0_SDA__I2C0_SDA, + + /* EMI */ + MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI, + MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI, + MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI, + MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI, + + MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI, + MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI, + MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI, + MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI, + MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI, + MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI, + MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI, + MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI, + + /* SPI2 (for flash) */ + MX28_PAD_SSP2_SCK__SSP2_SCK | MUX_CONFIG_SSP2, + MX28_PAD_SSP2_MOSI__SSP2_CMD | MUX_CONFIG_SSP2, + MX28_PAD_SSP2_MISO__SSP2_D0 | MUX_CONFIG_SSP2, + MX28_PAD_SSP2_SS0__SSP2_D3 | + (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP), +}; + +void board_init_ll(void) +{ + mxs_iomux_setup_multiple_pads(iomux_setup, ARRAY_SIZE(iomux_setup)); + mx28_power_init(); + mx28_mem_init(); + mx28_power_wait_pswitch(); +} + +/* Support aparatus */ +inline void board_init_f(unsigned long bootflag) +{ + for (;;) + ; +} + +inline void board_init_r(gd_t *id, ulong dest_addr) +{ + for (;;) + ; +} + +inline int printf(const char *fmt, ...) +{ + return 0; +} + +inline void __coloured_LED_init(void) {} +inline void __red_LED_on(void) {} +void coloured_LED_init(void) + __attribute__((weak, alias("__coloured_LED_init"))); +void red_LED_on(void) + __attribute__((weak, alias("__red_LED_on"))); +void hang(void) __attribute__ ((noreturn)); +void hang(void) +{ + for (;;) + ; +} diff --git a/board/denx/m28evk/power_init.c b/board/denx/m28evk/power_init.c new file mode 100644 index 000000000..27322b4ec --- /dev/null +++ b/board/denx/m28evk/power_init.c @@ -0,0 +1,913 @@ +/* + * Freescale i.MX28 Boot PMIC init + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> + +#include "m28_init.h" + +void mx28_power_clock2xtal(void) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + + /* Set XTAL as CPU reference clock */ + writel(CLKCTRL_CLKSEQ_BYPASS_CPU, + &clkctrl_regs->hw_clkctrl_clkseq_set); +} + +void mx28_power_clock2pll(void) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + + writel(CLKCTRL_PLL0CTRL0_POWER, + &clkctrl_regs->hw_clkctrl_pll0ctrl0_set); + early_delay(100); + writel(CLKCTRL_CLKSEQ_BYPASS_CPU, + &clkctrl_regs->hw_clkctrl_clkseq_clr); +} + +void mx28_power_clear_auto_restart(void) +{ + struct mx28_rtc_regs *rtc_regs = + (struct mx28_rtc_regs *)MXS_RTC_BASE; + + writel(RTC_CTRL_SFTRST, &rtc_regs->hw_rtc_ctrl_clr); + while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_SFTRST) + ; + + writel(RTC_CTRL_CLKGATE, &rtc_regs->hw_rtc_ctrl_clr); + while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_CLKGATE) + ; + + /* + * Due to the hardware design bug of mx28 EVK-A + * we need to set the AUTO_RESTART bit. + */ + if (readl(&rtc_regs->hw_rtc_persistent0) & RTC_PERSISTENT0_AUTO_RESTART) + return; + + while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK) + ; + + setbits_le32(&rtc_regs->hw_rtc_persistent0, + RTC_PERSISTENT0_AUTO_RESTART); + writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_set); + writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_clr); + while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK) + ; + while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_STALE_REGS_MASK) + ; +} + +void mx28_power_set_linreg(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + + /* Set linear regulator 25mV below switching converter */ + clrsetbits_le32(&power_regs->hw_power_vdddctrl, + POWER_VDDDCTRL_LINREG_OFFSET_MASK, + POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW); + + clrsetbits_le32(&power_regs->hw_power_vddactrl, + POWER_VDDACTRL_LINREG_OFFSET_MASK, + POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW); + + clrsetbits_le32(&power_regs->hw_power_vddioctrl, + POWER_VDDIOCTRL_LINREG_OFFSET_MASK, + POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW); +} + +void mx28_power_setup_5v_detect(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + + /* Start 5V detection */ + clrsetbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_VBUSVALID_TRSH_MASK, + POWER_5VCTRL_VBUSVALID_TRSH_4V4 | + POWER_5VCTRL_PWRUP_VBUS_CMPS); +} + +void mx28_src_power_init(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + + /* Improve efficieny and reduce transient ripple */ + writel(POWER_LOOPCTRL_TOGGLE_DIF | POWER_LOOPCTRL_EN_CM_HYST | + POWER_LOOPCTRL_EN_DF_HYST, &power_regs->hw_power_loopctrl_set); + + clrsetbits_le32(&power_regs->hw_power_dclimits, + POWER_DCLIMITS_POSLIMIT_BUCK_MASK, + 0x30 << POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET); + + setbits_le32(&power_regs->hw_power_battmonitor, + POWER_BATTMONITOR_EN_BATADJ); + + /* Increase the RCSCALE level for quick DCDC response to dynamic load */ + clrsetbits_le32(&power_regs->hw_power_loopctrl, + POWER_LOOPCTRL_EN_RCSCALE_MASK, + POWER_LOOPCTRL_RCSCALE_THRESH | + POWER_LOOPCTRL_EN_RCSCALE_8X); + + clrsetbits_le32(&power_regs->hw_power_minpwr, + POWER_MINPWR_HALFFETS, POWER_MINPWR_DOUBLE_FETS); + + /* 5V to battery handoff ... FIXME */ + setbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER); + early_delay(30); + clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER); +} + +void mx28_power_init_4p2_params(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + + /* Setup 4P2 parameters */ + clrsetbits_le32(&power_regs->hw_power_dcdc4p2, + POWER_DCDC4P2_CMPTRIP_MASK | POWER_DCDC4P2_TRG_MASK, + POWER_DCDC4P2_TRG_4V2 | (31 << POWER_DCDC4P2_CMPTRIP_OFFSET)); + + clrsetbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_HEADROOM_ADJ_MASK, + 0x4 << POWER_5VCTRL_HEADROOM_ADJ_OFFSET); + + clrsetbits_le32(&power_regs->hw_power_dcdc4p2, + POWER_DCDC4P2_DROPOUT_CTRL_MASK, + POWER_DCDC4P2_DROPOUT_CTRL_100MV | + POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL); + + clrsetbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK, + 0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); +} + +void mx28_enable_4p2_dcdc_input(int xfer) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + uint32_t tmp, vbus_thresh, vbus_5vdetect, pwd_bo; + uint32_t prev_5v_brnout, prev_5v_droop; + + prev_5v_brnout = readl(&power_regs->hw_power_5vctrl) & + POWER_5VCTRL_PWDN_5VBRNOUT; + prev_5v_droop = readl(&power_regs->hw_power_ctrl) & + POWER_CTRL_ENIRQ_VDD5V_DROOP; + + clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT); + writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF, + &power_regs->hw_power_reset); + + clrbits_le32(&power_regs->hw_power_ctrl, POWER_CTRL_ENIRQ_VDD5V_DROOP); + + if (xfer && (readl(&power_regs->hw_power_5vctrl) & + POWER_5VCTRL_ENABLE_DCDC)) { + return; + } + + /* + * Recording orignal values that will be modified temporarlily + * to handle a chip bug. See chip errata for CQ ENGR00115837 + */ + tmp = readl(&power_regs->hw_power_5vctrl); + vbus_thresh = tmp & POWER_5VCTRL_VBUSVALID_TRSH_MASK; + vbus_5vdetect = tmp & POWER_5VCTRL_VBUSVALID_5VDETECT; + + pwd_bo = readl(&power_regs->hw_power_minpwr) & POWER_MINPWR_PWD_BO; + + /* + * Disable mechanisms that get erroneously tripped by when setting + * the DCDC4P2 EN_DCDC + */ + clrbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_VBUSVALID_5VDETECT | + POWER_5VCTRL_VBUSVALID_TRSH_MASK); + + writel(POWER_MINPWR_PWD_BO, &power_regs->hw_power_minpwr_set); + + if (xfer) { + setbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_DCDC_XFER); + early_delay(20); + clrbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_DCDC_XFER); + + setbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_ENABLE_DCDC); + } else { + setbits_le32(&power_regs->hw_power_dcdc4p2, + POWER_DCDC4P2_ENABLE_DCDC); + } + + early_delay(25); + + clrsetbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_VBUSVALID_TRSH_MASK, vbus_thresh); + + if (vbus_5vdetect) + writel(vbus_5vdetect, &power_regs->hw_power_5vctrl_set); + + if (!pwd_bo) + clrbits_le32(&power_regs->hw_power_minpwr, POWER_MINPWR_PWD_BO); + + while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) + clrbits_le32(&power_regs->hw_power_ctrl, + POWER_CTRL_VBUS_VALID_IRQ); + + if (prev_5v_brnout) { + writel(POWER_5VCTRL_PWDN_5VBRNOUT, + &power_regs->hw_power_5vctrl_set); + writel(POWER_RESET_UNLOCK_KEY, + &power_regs->hw_power_reset); + } else { + writel(POWER_5VCTRL_PWDN_5VBRNOUT, + &power_regs->hw_power_5vctrl_clr); + writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF, + &power_regs->hw_power_reset); + } + + while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VDD5V_DROOP_IRQ) + clrbits_le32(&power_regs->hw_power_ctrl, + POWER_CTRL_VDD5V_DROOP_IRQ); + + if (prev_5v_droop) + clrbits_le32(&power_regs->hw_power_ctrl, + POWER_CTRL_ENIRQ_VDD5V_DROOP); + else + setbits_le32(&power_regs->hw_power_ctrl, + POWER_CTRL_ENIRQ_VDD5V_DROOP); +} + +void mx28_power_init_4p2_regulator(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + uint32_t tmp, tmp2; + + setbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_ENABLE_4P2); + + writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_set); + + writel(POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK, + &power_regs->hw_power_5vctrl_clr); + clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_TRG_MASK); + + /* Power up the 4p2 rail and logic/control */ + writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK, + &power_regs->hw_power_5vctrl_clr); + + /* + * Start charging up the 4p2 capacitor. We ramp of this charge + * gradually to avoid large inrush current from the 5V cable which can + * cause transients/problems + */ + mx28_enable_4p2_dcdc_input(0); + + if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) { + /* + * If we arrived here, we were unable to recover from mx23 chip + * errata 5837. 4P2 is disabled and sufficient battery power is + * not present. Exiting to not enable DCDC power during 5V + * connected state. + */ + clrbits_le32(&power_regs->hw_power_dcdc4p2, + POWER_DCDC4P2_ENABLE_DCDC); + writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK, + &power_regs->hw_power_5vctrl_set); + hang(); + } + + /* + * Here we set the 4p2 brownout level to something very close to 4.2V. + * We then check the brownout status. If the brownout status is false, + * the voltage is already close to the target voltage of 4.2V so we + * can go ahead and set the 4P2 current limit to our max target limit. + * If the brownout status is true, we need to ramp us the current limit + * so that we don't cause large inrush current issues. We step up the + * current limit until the brownout status is false or until we've + * reached our maximum defined 4p2 current limit. + */ + clrsetbits_le32(&power_regs->hw_power_dcdc4p2, + POWER_DCDC4P2_BO_MASK, + 22 << POWER_DCDC4P2_BO_OFFSET); /* 4.15V */ + + if (!(readl(&power_regs->hw_power_sts) & POWER_STS_DCDC_4P2_BO)) { + setbits_le32(&power_regs->hw_power_5vctrl, + 0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); + } else { + tmp = (readl(&power_regs->hw_power_5vctrl) & + POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK) >> + POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET; + while (tmp < 0x3f) { + if (!(readl(&power_regs->hw_power_sts) & + POWER_STS_DCDC_4P2_BO)) { + tmp = readl(&power_regs->hw_power_5vctrl); + tmp |= POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK; + early_delay(100); + writel(tmp, &power_regs->hw_power_5vctrl); + break; + } else { + tmp++; + tmp2 = readl(&power_regs->hw_power_5vctrl); + tmp2 &= ~POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK; + tmp2 |= tmp << + POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET; + writel(tmp2, &power_regs->hw_power_5vctrl); + early_delay(100); + } + } + } + + clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_BO_MASK); + writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr); +} + +void mx28_power_init_dcdc_4p2_source(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + + if (!(readl(&power_regs->hw_power_dcdc4p2) & + POWER_DCDC4P2_ENABLE_DCDC)) { + hang(); + } + + mx28_enable_4p2_dcdc_input(1); + + if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) { + clrbits_le32(&power_regs->hw_power_dcdc4p2, + POWER_DCDC4P2_ENABLE_DCDC); + writel(POWER_5VCTRL_ENABLE_DCDC, + &power_regs->hw_power_5vctrl_clr); + writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK, + &power_regs->hw_power_5vctrl_set); + } +} + +void mx28_power_enable_4p2(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + uint32_t vdddctrl, vddactrl, vddioctrl; + uint32_t tmp; + + vdddctrl = readl(&power_regs->hw_power_vdddctrl); + vddactrl = readl(&power_regs->hw_power_vddactrl); + vddioctrl = readl(&power_regs->hw_power_vddioctrl); + + setbits_le32(&power_regs->hw_power_vdddctrl, + POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG | + POWER_VDDDCTRL_PWDN_BRNOUT); + + setbits_le32(&power_regs->hw_power_vddactrl, + POWER_VDDACTRL_DISABLE_FET | POWER_VDDACTRL_ENABLE_LINREG | + POWER_VDDACTRL_PWDN_BRNOUT); + + setbits_le32(&power_regs->hw_power_vddioctrl, + POWER_VDDIOCTRL_DISABLE_FET | POWER_VDDIOCTRL_PWDN_BRNOUT); + + mx28_power_init_4p2_params(); + mx28_power_init_4p2_regulator(); + + /* Shutdown battery (none present) */ + clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_BO_MASK); + writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr); + writel(POWER_CTRL_ENIRQ_DCDC4P2_BO, &power_regs->hw_power_ctrl_clr); + + mx28_power_init_dcdc_4p2_source(); + + writel(vdddctrl, &power_regs->hw_power_vdddctrl); + early_delay(20); + writel(vddactrl, &power_regs->hw_power_vddactrl); + early_delay(20); + writel(vddioctrl, &power_regs->hw_power_vddioctrl); + + /* + * Check if FET is enabled on either powerout and if so, + * disable load. + */ + tmp = 0; + tmp |= !(readl(&power_regs->hw_power_vdddctrl) & + POWER_VDDDCTRL_DISABLE_FET); + tmp |= !(readl(&power_regs->hw_power_vddactrl) & + POWER_VDDACTRL_DISABLE_FET); + tmp |= !(readl(&power_regs->hw_power_vddioctrl) & + POWER_VDDIOCTRL_DISABLE_FET); + if (tmp) + writel(POWER_CHARGE_ENABLE_LOAD, + &power_regs->hw_power_charge_clr); +} + +void mx28_boot_valid_5v(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + + /* + * Use VBUSVALID level instead of VDD5V_GT_VDDIO level to trigger a 5V + * disconnect event. FIXME + */ + writel(POWER_5VCTRL_VBUSVALID_5VDETECT, + &power_regs->hw_power_5vctrl_set); + + /* Configure polarity to check for 5V disconnection. */ + writel(POWER_CTRL_POLARITY_VBUSVALID | + POWER_CTRL_POLARITY_VDD5V_GT_VDDIO, + &power_regs->hw_power_ctrl_clr); + + writel(POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_VDD5V_GT_VDDIO_IRQ, + &power_regs->hw_power_ctrl_clr); + + mx28_power_enable_4p2(); +} + +void mx28_powerdown(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + writel(POWER_RESET_UNLOCK_KEY, &power_regs->hw_power_reset); + writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF, + &power_regs->hw_power_reset); +} + +void mx28_handle_5v_conflict(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + uint32_t tmp; + + setbits_le32(&power_regs->hw_power_vddioctrl, + POWER_VDDIOCTRL_BO_OFFSET_MASK); + + for (;;) { + tmp = readl(&power_regs->hw_power_sts); + + if (tmp & POWER_STS_VDDIO_BO) { + mx28_powerdown(); + break; + } + + if (tmp & POWER_STS_VDD5V_GT_VDDIO) { + mx28_boot_valid_5v(); + break; + } else { + mx28_powerdown(); + break; + } + } +} + +int mx28_get_batt_volt(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + uint32_t volt = readl(&power_regs->hw_power_battmonitor); + volt &= POWER_BATTMONITOR_BATT_VAL_MASK; + volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET; + volt *= 8; + return volt; +} + +int mx28_is_batt_ready(void) +{ + return (mx28_get_batt_volt() >= 3600); +} + +void mx28_5v_boot(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + + /* + * NOTE: In original IMX-Bootlets, this also checks for VBUSVALID, + * but their implementation always returns 1 so we omit it here. + */ + if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { + mx28_boot_valid_5v(); + return; + } + + early_delay(1000); + if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { + mx28_boot_valid_5v(); + return; + } + + mx28_handle_5v_conflict(); +} + +void mx28_init_batt_bo(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + + /* Brownout at 3V */ + clrsetbits_le32(&power_regs->hw_power_battmonitor, + POWER_BATTMONITOR_BRWNOUT_LVL_MASK, + 15 << POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET); + + writel(POWER_CTRL_BATT_BO_IRQ, &power_regs->hw_power_ctrl_clr); + writel(POWER_CTRL_ENIRQ_BATT_BO, &power_regs->hw_power_ctrl_clr); +} + +void mx28_switch_vddd_to_dcdc_source(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + + clrsetbits_le32(&power_regs->hw_power_vdddctrl, + POWER_VDDDCTRL_LINREG_OFFSET_MASK, + POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW); + + clrbits_le32(&power_regs->hw_power_vdddctrl, + POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG | + POWER_VDDDCTRL_DISABLE_STEPPING); +} + +int mx28_is_batt_good(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + uint32_t volt; + + volt = readl(&power_regs->hw_power_battmonitor); + volt &= POWER_BATTMONITOR_BATT_VAL_MASK; + volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET; + volt *= 8; + + if ((volt >= 2400) && (volt <= 4300)) + return 1; + + clrsetbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK, + 0x3 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); + writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK, + &power_regs->hw_power_5vctrl_clr); + + clrsetbits_le32(&power_regs->hw_power_charge, + POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK, + POWER_CHARGE_STOP_ILIMIT_10MA | 0x3); + + writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_clr); + writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK, + &power_regs->hw_power_5vctrl_clr); + + early_delay(500000); + + volt = readl(&power_regs->hw_power_battmonitor); + volt &= POWER_BATTMONITOR_BATT_VAL_MASK; + volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET; + volt *= 8; + + if (volt >= 3500) + return 0; + + if (volt >= 2400) + return 1; + + writel(POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK, + &power_regs->hw_power_charge_clr); + writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_set); + + return 0; +} + +void mx28_power_configure_power_source(void) +{ + mx28_src_power_init(); + + mx28_5v_boot(); + mx28_power_clock2pll(); + + mx28_init_batt_bo(); + mx28_switch_vddd_to_dcdc_source(); +} + +void mx28_enable_output_rail_protection(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + + writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ | + POWER_CTRL_VDDIO_BO_IRQ, &power_regs->hw_power_ctrl_clr); + + setbits_le32(&power_regs->hw_power_vdddctrl, + POWER_VDDDCTRL_PWDN_BRNOUT); + + setbits_le32(&power_regs->hw_power_vddactrl, + POWER_VDDACTRL_PWDN_BRNOUT); + + setbits_le32(&power_regs->hw_power_vddioctrl, + POWER_VDDIOCTRL_PWDN_BRNOUT); +} + +int mx28_get_vddio_power_source_off(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + uint32_t tmp; + + if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { + tmp = readl(&power_regs->hw_power_vddioctrl); + if (tmp & POWER_VDDIOCTRL_DISABLE_FET) { + if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) == + POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) { + return 1; + } + } + + if (!(readl(&power_regs->hw_power_5vctrl) & + POWER_5VCTRL_ENABLE_DCDC)) { + if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) == + POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) { + return 1; + } + } + } + + return 0; + +} + +int mx28_get_vddd_power_source_off(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + uint32_t tmp; + + tmp = readl(&power_regs->hw_power_vdddctrl); + if (tmp & POWER_VDDDCTRL_DISABLE_FET) { + if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) == + POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) { + return 1; + } + } + + if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { + if (!(readl(&power_regs->hw_power_5vctrl) & + POWER_5VCTRL_ENABLE_DCDC)) { + return 1; + } + } + + if (!(tmp & POWER_VDDDCTRL_ENABLE_LINREG)) { + if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) == + POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW) { + return 1; + } + } + + return 0; +} + +void mx28_power_set_vddio(uint32_t new_target, uint32_t new_brownout) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + uint32_t cur_target, diff, bo_int = 0; + uint32_t powered_by_linreg = 0; + + new_brownout = new_target - new_brownout; + + cur_target = readl(&power_regs->hw_power_vddioctrl); + cur_target &= POWER_VDDIOCTRL_TRG_MASK; + cur_target *= 50; /* 50 mV step*/ + cur_target += 2800; /* 2800 mV lowest */ + + powered_by_linreg = mx28_get_vddio_power_source_off(); + if (new_target > cur_target) { + + if (powered_by_linreg) { + bo_int = readl(&power_regs->hw_power_vddioctrl); + clrbits_le32(&power_regs->hw_power_vddioctrl, + POWER_CTRL_ENIRQ_VDDIO_BO); + } + + setbits_le32(&power_regs->hw_power_vddioctrl, + POWER_VDDIOCTRL_BO_OFFSET_MASK); + do { + if (new_target - cur_target > 100) + diff = cur_target + 100; + else + diff = new_target; + + diff -= 2800; + diff /= 50; + + clrsetbits_le32(&power_regs->hw_power_vddioctrl, + POWER_VDDIOCTRL_TRG_MASK, diff); + + if (powered_by_linreg) + early_delay(1500); + else { + while (!(readl(&power_regs->hw_power_sts) & + POWER_STS_DC_OK)) + ; + + } + + cur_target = readl(&power_regs->hw_power_vddioctrl); + cur_target &= POWER_VDDIOCTRL_TRG_MASK; + cur_target *= 50; /* 50 mV step*/ + cur_target += 2800; /* 2800 mV lowest */ + } while (new_target > cur_target); + + if (powered_by_linreg) { + writel(POWER_CTRL_VDDIO_BO_IRQ, + &power_regs->hw_power_ctrl_clr); + if (bo_int & POWER_CTRL_ENIRQ_VDDIO_BO) + setbits_le32(&power_regs->hw_power_vddioctrl, + POWER_CTRL_ENIRQ_VDDIO_BO); + } + } else { + do { + if (cur_target - new_target > 100) + diff = cur_target - 100; + else + diff = new_target; + + diff -= 2800; + diff /= 50; + + clrsetbits_le32(&power_regs->hw_power_vddioctrl, + POWER_VDDIOCTRL_TRG_MASK, diff); + + if (powered_by_linreg) + early_delay(1500); + else { + while (!(readl(&power_regs->hw_power_sts) & + POWER_STS_DC_OK)) + ; + + } + + cur_target = readl(&power_regs->hw_power_vddioctrl); + cur_target &= POWER_VDDIOCTRL_TRG_MASK; + cur_target *= 50; /* 50 mV step*/ + cur_target += 2800; /* 2800 mV lowest */ + } while (new_target < cur_target); + } + + clrsetbits_le32(&power_regs->hw_power_vddioctrl, + POWER_VDDDCTRL_BO_OFFSET_MASK, + new_brownout << POWER_VDDDCTRL_BO_OFFSET_OFFSET); +} + +void mx28_power_set_vddd(uint32_t new_target, uint32_t new_brownout) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + uint32_t cur_target, diff, bo_int = 0; + uint32_t powered_by_linreg = 0; + + new_brownout = new_target - new_brownout; + + cur_target = readl(&power_regs->hw_power_vdddctrl); + cur_target &= POWER_VDDDCTRL_TRG_MASK; + cur_target *= 25; /* 25 mV step*/ + cur_target += 800; /* 800 mV lowest */ + + powered_by_linreg = mx28_get_vddd_power_source_off(); + if (new_target > cur_target) { + if (powered_by_linreg) { + bo_int = readl(&power_regs->hw_power_vdddctrl); + clrbits_le32(&power_regs->hw_power_vdddctrl, + POWER_CTRL_ENIRQ_VDDD_BO); + } + + setbits_le32(&power_regs->hw_power_vdddctrl, + POWER_VDDDCTRL_BO_OFFSET_MASK); + + do { + if (new_target - cur_target > 100) + diff = cur_target + 100; + else + diff = new_target; + + diff -= 800; + diff /= 25; + + clrsetbits_le32(&power_regs->hw_power_vdddctrl, + POWER_VDDDCTRL_TRG_MASK, diff); + + if (powered_by_linreg) + early_delay(1500); + else { + while (!(readl(&power_regs->hw_power_sts) & + POWER_STS_DC_OK)) + ; + + } + + cur_target = readl(&power_regs->hw_power_vdddctrl); + cur_target &= POWER_VDDDCTRL_TRG_MASK; + cur_target *= 25; /* 25 mV step*/ + cur_target += 800; /* 800 mV lowest */ + } while (new_target > cur_target); + + if (powered_by_linreg) { + writel(POWER_CTRL_VDDD_BO_IRQ, + &power_regs->hw_power_ctrl_clr); + if (bo_int & POWER_CTRL_ENIRQ_VDDD_BO) + setbits_le32(&power_regs->hw_power_vdddctrl, + POWER_CTRL_ENIRQ_VDDD_BO); + } + } else { + do { + if (cur_target - new_target > 100) + diff = cur_target - 100; + else + diff = new_target; + + diff -= 800; + diff /= 25; + + clrsetbits_le32(&power_regs->hw_power_vdddctrl, + POWER_VDDDCTRL_TRG_MASK, diff); + + if (powered_by_linreg) + early_delay(1500); + else { + while (!(readl(&power_regs->hw_power_sts) & + POWER_STS_DC_OK)) + ; + + } + + cur_target = readl(&power_regs->hw_power_vdddctrl); + cur_target &= POWER_VDDDCTRL_TRG_MASK; + cur_target *= 25; /* 25 mV step*/ + cur_target += 800; /* 800 mV lowest */ + } while (new_target < cur_target); + } + + clrsetbits_le32(&power_regs->hw_power_vdddctrl, + POWER_VDDDCTRL_BO_OFFSET_MASK, + new_brownout << POWER_VDDDCTRL_BO_OFFSET_OFFSET); +} + +void mx28_power_init(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + + mx28_power_clock2xtal(); + mx28_power_clear_auto_restart(); + mx28_power_set_linreg(); + mx28_power_setup_5v_detect(); + mx28_power_configure_power_source(); + mx28_enable_output_rail_protection(); + + mx28_power_set_vddio(3300, 3150); + + mx28_power_set_vddd(1350, 1200); + + writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ | + POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ | + POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_BATT_BO_IRQ | + POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr); + + writel(POWER_5VCTRL_PWDN_5VBRNOUT, &power_regs->hw_power_5vctrl_set); + + early_delay(1000); +} + +#ifdef CONFIG_SPL_MX28_PSWITCH_WAIT +void mx28_power_wait_pswitch(void) +{ + struct mx28_power_regs *power_regs = + (struct mx28_power_regs *)MXS_POWER_BASE; + + while (!(readl(&power_regs->hw_power_sts) & POWER_STS_PSWITCH_MASK)) + ; +} +#endif diff --git a/board/denx/m28evk/start.S b/board/denx/m28evk/start.S new file mode 100644 index 000000000..94696d6cd --- /dev/null +++ b/board/denx/m28evk/start.S @@ -0,0 +1,234 @@ +/* + * armboot - Startup Code for ARM926EJS CPU-core + * + * Copyright (c) 2003 Texas Instruments + * + * ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------ + * + * Copyright (c) 2001 Marius Groger <mag@sysgo.de> + * Copyright (c) 2002 Alex Zupke <azu@sysgo.de> + * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de> + * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com> + * Copyright (c) 2003 Kshitij <kshitij@ti.com> + * Copyright (c) 2010 Albert Aribaud <albert.u.boot@aribaud.net> + * + * Change to support call back into iMX28 bootrom + * Copyright (c) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm-offsets.h> +#include <config.h> +#include <common.h> +#include <version.h> + +#if defined(CONFIG_OMAP1610) +#include <./configs/omap1510.h> +#elif defined(CONFIG_OMAP730) +#include <./configs/omap730.h> +#endif + +/* + ************************************************************************* + * + * Jump vector table as in table 3.1 in [1] + * + ************************************************************************* + */ + + +.globl _start +_start: + b reset + b undefined_instruction + b software_interrupt + b prefetch_abort + b data_abort + b not_used + b irq + b fiq + +/* + * Vector table, located at address 0x20. + * This table allows the code running AFTER SPL, the U-Boot, to install it's + * interrupt handlers here. The problem is that the U-Boot is loaded into RAM, + * including it's interrupt vectoring table and the table at 0x0 is still the + * SPLs. So if interrupt happens in U-Boot, the SPLs interrupt vectoring table + * is still used. + */ +_vt_reset: + .word _reset +_vt_undefined_instruction: + .word _hang +_vt_software_interrupt: + .word _hang +_vt_prefetch_abort: + .word _hang +_vt_data_abort: + .word _hang +_vt_not_used: + .word _reset +_vt_irq: + .word _hang +_vt_fiq: + .word _hang + +reset: + ldr pc, _vt_reset +undefined_instruction: + ldr pc, _vt_undefined_instruction +software_interrupt: + ldr pc, _vt_software_interrupt +prefetch_abort: + ldr pc, _vt_prefetch_abort +data_abort: + ldr pc, _vt_data_abort +not_used: + ldr pc, _vt_not_used +irq: + ldr pc, _vt_irq +fiq: + ldr pc, _vt_fiq + + .balignl 16,0xdeadbeef + +/* + ************************************************************************* + * + * Startup Code (reset vector) + * + * do important init only if we don't start from memory! + * setup Memory and board specific bits prior to relocation. + * relocate armboot to ram + * setup stack + * + ************************************************************************* + */ + +.globl _TEXT_BASE +_TEXT_BASE: + .word CONFIG_SYS_TEXT_BASE + +/* + * These are defined in the board-specific linker script. + * Subtracting _start from them lets the linker put their + * relative position in the executable instead of leaving + * them null. + */ +.globl _bss_start_ofs +_bss_start_ofs: + .word __bss_start - _start + +.globl _bss_end_ofs +_bss_end_ofs: + .word __bss_end__ - _start + +.globl _end_ofs +_end_ofs: + .word _end - _start + +#ifdef CONFIG_USE_IRQ +/* IRQ stack memory (calculated at run-time) */ +.globl IRQ_STACK_START +IRQ_STACK_START: + .word 0x0badc0de + +/* IRQ stack memory (calculated at run-time) */ +.globl FIQ_STACK_START +FIQ_STACK_START: + .word 0x0badc0de +#endif + +/* IRQ stack memory (calculated at run-time) + 8 bytes */ +.globl IRQ_STACK_START_IN +IRQ_STACK_START_IN: + .word 0x0badc0de + +/* + * the actual reset code + */ + +_reset: + /* + * Store all registers on old stack pointer, this will allow us later to + * return to the BootROM and let the BootROM load U-Boot into RAM. + */ + push {r0-r12,r14} + + /* + * set the cpu to SVC32 mode + */ + mrs r0,cpsr + bic r0,r0,#0x1f + orr r0,r0,#0xd3 + msr cpsr,r0 + + /* + * we do sys-critical inits only at reboot, + * not when booting from ram! + */ +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + bl cpu_init_crit +#endif + + bl board_init_ll + + pop {r0-r12,r14} + bx lr + +/* + ************************************************************************* + * + * CPU_init_critical registers + * + * setup important registers + * setup memory timing + * + ************************************************************************* + */ +#ifndef CONFIG_SKIP_LOWLEVEL_INIT +cpu_init_crit: + /* + * flush v4 I/D caches + */ + mov r0, #0 + mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ + mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ + + /* + * disable MMU stuff and caches + */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #0x00002300 /* clear bits 13, 9:8 (--V- --RS) */ + bic r0, r0, #0x00000087 /* clear bits 7, 2:0 (B--- -CAM) */ + orr r0, r0, #0x00000002 /* set bit 2 (A) Align */ + orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */ + mcr p15, 0, r0, c1, c0, 0 + + mov pc, lr /* back to my caller */ + + .align 5 +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ + +_hang: + ldr sp, _TEXT_BASE /* switch to abort stack */ +1: + bl 1b /* hang and never return */ diff --git a/board/denx/m28evk/u-boot-spl.lds b/board/denx/m28evk/u-boot-spl.lds new file mode 100644 index 000000000..e296a92ed --- /dev/null +++ b/board/denx/m28evk/u-boot-spl.lds @@ -0,0 +1,87 @@ +/* + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * January 2004 - Changed to support H4 device + * Copyright (c) 2004-2008 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + board/denx/m28evk/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { + *(.data) + } + + . = ALIGN(4); + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + + .rel.dyn : { + __rel_dyn_start = .; + *(.rel*) + __rel_dyn_end = .; + } + + .dynsym : { + __dynsym_start = .; + *(.dynsym) + } + + _end = .; + + .bss __rel_dyn_start (OVERLAY) : { + __bss_start = .; + *(.bss) + . = ALIGN(4); + __bss_end__ = .; + } + + /DISCARD/ : { *(.bss*) } + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynsym*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.hash*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } +} diff --git a/board/denx/m28evk/u-boot.bd b/board/denx/m28evk/u-boot.bd new file mode 100644 index 000000000..3ce7f92d7 --- /dev/null +++ b/board/denx/m28evk/u-boot.bd @@ -0,0 +1,14 @@ +sources { + u_boot_spl="spl/u-boot-spl.bin"; + u_boot="u-boot.bin"; +} + +section (0) { + load u_boot_spl > 0x0000; + load ivt (entry = 0x0014) > 0x8000; + hab call 0x8000; + + load u_boot > 0x40000100; + load ivt (entry = 0x40000100) > 0x8000; + hab call 0x8000; +} diff --git a/board/innokom/flash.c b/board/innokom/flash.c deleted file mode 100644 index ed4b9872a..000000000 --- a/board/innokom/flash.c +++ /dev/null @@ -1,421 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de> - * - * (C) Copyright 2002 - * Auerswald GmbH & Co KG, Germany - * Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/pxa-regs.h> - -/* Debugging macros ------------------------------------------------------ */ - -#undef FLASH_DEBUG - -/* Some debug macros */ -#if (FLASH_DEBUG > 2 ) -#define PRINTK3(args...) printf(args) -#else -#define PRINTK3(args...) -#endif - -#if FLASH_DEBUG > 1 -#define PRINTK2(args...) printf(args) -#else -#define PRINTK2(args...) -#endif - -#ifdef FLASH_DEBUG -#define PRINTK(args...) printf(args) -#else -#define PRINTK(args...) -#endif - -/* ------------------------------------------------------------------------ */ - -/* Development system: we have only 16 MB Flash */ -#ifdef CONFIG_MTD_INNOKOM_16MB -#define FLASH_BANK_SIZE 0x01000000 /* 16 MB (during development) */ -#define MAIN_SECT_SIZE 0x00020000 /* 128k per sector */ -#endif - -/* Production system: we have 64 MB Flash */ -#ifdef CONFIG_MTD_INNOKOM_64MB -#define FLASH_BANK_SIZE 0x04000000 /* 64 MB */ -#define MAIN_SECT_SIZE 0x00020000 /* 128k per sector */ -#endif - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -/** - * flash_init: - initialize data structures for flash chips - * - * @return: size of the flash - */ - -ulong flash_init(void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - flash_info[i].flash_id = - (INTEL_MANUFACT & FLASH_VENDMASK) | - (INTEL_ID_28F128J3 & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - - switch (i) { - case 0: - flashbase = PHYS_FLASH_1; - break; - default: - panic("configured too many flash banks!\n"); - break; - } - for (j = 0; j < flash_info[i].sector_count; j++) { - flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE; - } - size += flash_info[i].size; - } - - /* Protect u-boot sectors */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + (256*1024) - 1, - &flash_info[0]); - -#ifdef CONFIG_ENV_IS_IN_FLASH - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, - &flash_info[0]); -#endif - - return size; -} - - -/** - * flash_print_info: - print information about the flash situation - * - * @param info: - */ - -void flash_print_info (flash_info_t *info) -{ - int i, j; - - for (j=0; j<CONFIG_SYS_MAX_FLASH_BANKS; j++) { - - switch (info->flash_id & FLASH_VENDMASK) { - - case (INTEL_MANUFACT & FLASH_VENDMASK): - printf("Intel: "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - - case (INTEL_ID_28F128J3 & FLASH_TYPEMASK): - printf("28F128J3 (128Mbit)\n"); - break; - default: - printf("Unknown Chip Type\n"); - return; - } - - printf(" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) printf ("\n "); - - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - info++; - } -} - - -/** - * flash_erase: - erase flash sectors - * - */ - -int flash_erase(flash_info_t *info, int s_first, int s_last) -{ - int flag, prot, sect; - int rc = ERR_OK; - ulong start; - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } - - if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK)) - return ERR_UNKNOWN_FLASH_VENDOR; - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) prot++; - } - - if (prot) return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - - flag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last && !ctrlc(); sect++) { - - printf("Erasing sector %2d ... ", sect); - - PRINTK("\n"); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - if (info->protect[sect] == 0) { /* not protected */ - u16 * volatile addr = (u16 * volatile)(info->start[sect]); - - PRINTK("unlocking sector\n"); - *addr = 0x0060; - *addr = 0x00d0; - *addr = 0x00ff; - - PRINTK("erasing sector\n"); - *addr = 0x0020; - PRINTK("confirming erase\n"); - *addr = 0x00D0; - - while ((*addr & 0x0080) != 0x0080) { - PRINTK("."); - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - *addr = 0x00B0; /* suspend erase*/ - *addr = 0x00FF; /* read mode */ - rc = ERR_TIMOUT; - goto outahere; - } - } - - PRINTK("clearing status register\n"); - *addr = 0x0050; - PRINTK("resetting to read mode"); - *addr = 0x00FF; - } - - printf("ok.\n"); - } - - if (ctrlc()) printf("User Interrupt!\n"); - - outahere: - - /* allow flash to settle - wait 10 ms */ - udelay_masked(10000); - - if (flag) enable_interrupts(); - - return rc; -} - - -/** - * write_word: - copy memory to flash - * - * @param info: - * @param dest: - * @param data: - * @return: - */ - -static int write_word (flash_info_t *info, ulong dest, ushort data) -{ - volatile u16 *addr = (u16 *)dest, val; - int rc = ERR_OK; - int flag; - ulong start; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) return ERR_NOT_ERASED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - flag = disable_interrupts(); - - /* clear status register command */ - *addr = 0x50; - - /* program set-up command */ - *addr = 0x40; - - /* latch address/data */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait while polling the status register */ - while(((val = *addr) & 0x80) != 0x80) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - rc = ERR_TIMOUT; - *addr = 0xB0; /* suspend program command */ - goto outahere; - } - } - - if(val & 0x1A) { /* check for error */ - printf("\nFlash write error %02x at address %08lx\n", - (int)val, (unsigned long)dest); - if(val & (1<<3)) { - printf("Voltage range error.\n"); - rc = ERR_PROG_ERROR; - goto outahere; - } - if(val & (1<<1)) { - printf("Device protect error.\n"); - rc = ERR_PROTECTED; - goto outahere; - } - if(val & (1<<4)) { - printf("Programming error.\n"); - rc = ERR_PROG_ERROR; - goto outahere; - } - rc = ERR_PROG_ERROR; - goto outahere; - } - - outahere: - - *addr = 0xFF; /* read array command */ - if (flag) enable_interrupts(); - - return rc; -} - - -/** - * write_buf: - Copy memory to flash. - * - * @param info: - * @param src: source of copy transaction - * @param addr: where to copy to - * @param cnt: number of bytes to copy - * - * @return error code - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp; - ushort data; - int l; - int i, rc; - - wp = (addr & ~1); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 8); - } - for (; i<2 && cnt>0; ++i) { - data = (data >> 8) | (*src++ << 8); - --cnt; - ++cp; - } - for (; cnt==0 && i<2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 8); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 2; - } - - /* - * handle word aligned part - */ - while (cnt >= 2) { - /* data = *((vushort*)src); */ - data = *((ushort*)src); - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 0) return ERR_OK; - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 8); - --cnt; - } - for (; i<2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 8); - } - - return write_word(info, wp, data); -} diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c deleted file mode 100644 index 22de7e340..000000000 --- a/board/innokom/innokom.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * (C) Copyright 2002 - * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de - * Kyle Harris, Nexus Technologies, Inc., kharris@nexus-tech.net - * Marius Groeger, Sysgo Real-Time Solutions GmbH, mgroeger@sysgo.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> -#include <asm/arch/pxa-regs.h> -#include <asm/mach-types.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_SHOW_BOOT_PROGRESS -# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) -#else -# define SHOW_BOOT_PROGRESS(arg) -#endif - -/** - * i2c_init_board - reset i2c bus. When the board is powercycled during a - * bus transfer it might hang; for details see doc/I2C_Edge_Conditions. - * The Innokom board has GPIO70 connected to SCLK which can be toggled - * until all chips think that their current cycles are finished. - */ -int i2c_init_board(void) -{ - int i; - - /* set gpio pin low _before_ we change direction to output */ - writel(GPIO_bit(70), GPCR(70)); - - /* now toggle between output=low and high-impedance */ - for (i = 0; i < 20; i++) { - writel(readl(GPDR(70)) | GPIO_bit(70), GPDR(70)); /* output */ - udelay(10); - writel(readl(GPDR(70)) & ~GPIO_bit(70), GPDR(70)); /* input */ - udelay(10); - } - - return 0; -} - - -/** - * misc_init_r: - misc initialisation routines - */ - -int misc_init_r(void) -{ - char *str; - - /* determine if the software update key is pressed during startup */ - if (readl(GPLR0) & 0x00000800) { - printf("using bootcmd_normal (sw-update button not pressed)\n"); - str = getenv("bootcmd_normal"); - } else { - printf("using bootcmd_update (sw-update button pressed)\n"); - str = getenv("bootcmd_update"); - } - - setenv("bootcmd",str); - - return 0; -} - - -/** - * board_init: - setup some data structures - * - * @return: 0 in case of success - */ - -int board_init (void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - gd->bd->bi_arch_number = MACH_TYPE_INNOKOM; - gd->bd->bi_boot_params = 0xa0000100; - gd->bd->bi_baudrate = CONFIG_BAUDRATE; - - return 0; -} - -extern void pxa_dram_init(void); -int dram_init(void) -{ - pxa_dram_init(); - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -/** - * innokom_set_led: - switch LEDs on or off - * - * @param led: LED to switch (0,1,2) - * @param state: switch on (1) or off (0) - */ - -void innokom_set_led(int led, int state) -{ - switch(led) { -/* - case 0: if (state==1) { - GPCR0 |= CSB226_USER_LED0; - } else if (state==0) { - GPSR0 |= CSB226_USER_LED0; - } - break; - - case 1: if (state==1) { - GPCR0 |= CSB226_USER_LED1; - } else if (state==0) { - GPSR0 |= CSB226_USER_LED1; - } - break; - - case 2: if (state==1) { - GPCR0 |= CSB226_USER_LED2; - } else if (state==0) { - GPSR0 |= CSB226_USER_LED2; - } - break; -*/ - } - - return; -} - - -/** - * show_boot_progress: - indicate state of the boot process - * - * @param status: Status number - see README for details. - * - * The CSB226 does only have 3 LEDs, so we switch them on at the most - * important states (1, 5, 15). - */ - -void show_boot_progress (int status) -{ - switch(status) { -/* - case 1: csb226_set_led(0,1); break; - case 5: csb226_set_led(1,1); break; - case 15: csb226_set_led(2,1); break; -*/ - } - - return; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c index e63625bf9..9f259c220 100644 --- a/board/mpl/vcma9/vcma9.c +++ b/board/mpl/vcma9/vcma9.c @@ -72,9 +72,6 @@ int board_early_init_f(void) int board_init(void) { - /* arch number of VCMA9-Board */ - gd->bd->bi_arch_number = MACH_TYPE_MPL_VCMA9; - /* adress of boot parameters */ gd->bd->bi_boot_params = 0x30000100; diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c index 871b94ada..b26e33a65 100644 --- a/board/ronetix/pm9261/pm9261.c +++ b/board/ronetix/pm9261/pm9261.c @@ -248,9 +248,6 @@ int board_init(void) 1 << ATMEL_ID_PIOC, &pmc->pcer); - /* arch number of PM9261-Board */ - gd->bd->bi_arch_number = MACH_TYPE_PM9261; - /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c index cfc9847cc..b0f7ea6dd 100644 --- a/board/ronetix/pm9263/pm9263.c +++ b/board/ronetix/pm9263/pm9263.c @@ -349,9 +349,6 @@ int board_init(void) (1 << ATMEL_ID_PIOB), &pmc->pcer); - /* arch number of AT91SAM9263EK-Board */ - gd->bd->bi_arch_number = MACH_TYPE_PM9263; - /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c index f3374a442..961d193fd 100644 --- a/board/ronetix/pm9g45/pm9g45.c +++ b/board/ronetix/pm9g45/pm9g45.c @@ -139,8 +139,6 @@ int board_init(void) (1 << ATMEL_ID_PIOC) | (1 << ATMEL_ID_PIODE), &pmc->pcer); - /* arch number of AT91SAM9M10G45EK-Board */ - gd->bd->bi_arch_number = MACH_TYPE_PM9G45; /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; diff --git a/board/syteco/zmx25/zmx25.c b/board/syteco/zmx25/zmx25.c index a89ee1a08..c56b195ae 100644 --- a/board/syteco/zmx25/zmx25.c +++ b/board/syteco/zmx25/zmx25.c @@ -128,7 +128,6 @@ int board_late_init(void) #ifdef CONFIG_FEC_MXC struct iomuxc_mux_ctl *muxctl; - struct iomuxc_pad_ctl *padctl; u32 gpio_mux_mode2 = MX25_PIN_MUX_MODE(2); u32 gpio_mux_mode5 = MX25_PIN_MUX_MODE(5); @@ -144,7 +143,6 @@ int board_late_init(void) * FEC_RX_ERR: FEC_RX_ERR is ALT 2 mode of pin R2 */ muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; - padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; writel(gpio_mux_mode5, &muxctl->pad_upll_bypclk); writel(gpio_mux_mode2, &muxctl->pad_uart2_cts); diff --git a/board/innokom/Makefile b/board/ti/omap5_evm/Makefile index 8b58b7f19..fa81d64be 100644 --- a/board/innokom/Makefile +++ b/board/ti/omap5_evm/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2006 +# (C) Copyright 2000, 2001, 2002 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -12,7 +12,7 @@ # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := innokom.o flash.o +COBJS := evm.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) @@ -33,6 +33,12 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + ######################################################################### # defines $(obj).depend target diff --git a/board/ti/omap5_evm/evm.c b/board/ti/omap5_evm/evm.c new file mode 100644 index 000000000..ea0cb13b4 --- /dev/null +++ b/board/ti/omap5_evm/evm.c @@ -0,0 +1,101 @@ +/* + * (C) Copyright 2010 + * Texas Instruments Incorporated, <www.ti.com> + * Aneesh V <aneesh@ti.com> + * Steve Sakoman <steve@sakoman.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <twl6030.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mmc_host_def.h> + +#include "mux_data.h" + +DECLARE_GLOBAL_DATA_PTR; + +const struct omap_sysinfo sysinfo = { + "Board: OMAP5430 EVM\n" +}; + +/** + * @brief board_init + * + * @return 0 + */ +int board_init(void) +{ + gpmc_init(); + gd->bd->bi_arch_number = MACH_TYPE_OMAP5_SEVM; + gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + return 0; +} + +/** + * @brief misc_init_r - Configure EVM board specific configurations + * such as power configurations, ethernet initialization as phase2 of + * boot sequence + * + * @return 0 + */ +int misc_init_r(void) +{ +#ifdef CONFIG_TWL6030_POWER + twl6030_init_battery_charging(); +#endif + return 0; +} + +void set_muxconf_regs_essential(void) +{ + do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential, + sizeof(core_padconf_array_essential) / + sizeof(struct pad_conf_entry)); + + do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential, + sizeof(wkup_padconf_array_essential) / + sizeof(struct pad_conf_entry)); +} + +void set_muxconf_regs_non_essential(void) +{ + do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential, + sizeof(core_padconf_array_non_essential) / + sizeof(struct pad_conf_entry)); + + do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential, + sizeof(wkup_padconf_array_non_essential) / + sizeof(struct pad_conf_entry)); +} + +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0); + omap_mmc_init(1); + return 0; +} +#endif diff --git a/board/ti/omap5_evm/mux_data.h b/board/ti/omap5_evm/mux_data.h new file mode 100644 index 000000000..18f472925 --- /dev/null +++ b/board/ti/omap5_evm/mux_data.h @@ -0,0 +1,275 @@ +/* + * (C) Copyright 2010 + * Texas Instruments Incorporated, <www.ti.com> + * + * Balaji Krishnamoorthy <balajitk@ti.com> + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _EVM5430_MUX_DATA_H +#define _EVM5430_MUX_DATA_H + +#include <asm/arch/mux_omap5.h> + +const struct pad_conf_entry core_padconf_array_essential[] = { + +{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */ +{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */ +{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */ +{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */ +{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */ +{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */ +{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */ +{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */ +{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */ +{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */ +{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */ +{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */ +{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */ +{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */ +{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */ +{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */ +{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */ +{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */ +{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */ +{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */ +{UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */ +{UART3_RTS_SD, (M0)}, /* uart3_rts_sd */ +{UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */ +{UART3_TX_IRTX, (M0)} /* uart3_tx */ + +}; + +const struct pad_conf_entry wkup_padconf_array_essential[] = { + +{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */ +{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */ +{PAD1_SYS_32K, (IEN | M0)} /* sys_32k */ + +}; + +const struct pad_conf_entry core_padconf_array_non_essential[] = { + {GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_32 */ + {GPMC_AD9, (PTU | IEN | M3)}, /* gpio_33 */ + {GPMC_AD10, (PTU | IEN | M3)}, /* gpio_34 */ + {GPMC_AD11, (PTU | IEN | M3)}, /* gpio_35 */ + {GPMC_AD12, (PTU | IEN | M3)}, /* gpio_36 */ + {GPMC_AD13, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_37 */ + {GPMC_AD14, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_38 */ + {GPMC_AD15, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_39 */ + {GPMC_A16, (M3)}, /* gpio_40 */ + {GPMC_A17, (PTD | M3)}, /* gpio_41 */ + {GPMC_A18, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row6 */ + {GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row7 */ + {GPMC_A20, (IEN | M3)}, /* gpio_44 */ + {GPMC_A21, (M3)}, /* gpio_45 */ + {GPMC_A22, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col6 */ + {GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col7 */ + {GPMC_A24, (PTD | M3)}, /* gpio_48 */ + {GPMC_A25, (PTD | M3)}, /* gpio_49 */ + {GPMC_NCS0, (M3)}, /* gpio_50 */ + {GPMC_NCS1, (IEN | M3)}, /* gpio_51 */ + {GPMC_NCS2, (IEN | M3)}, /* gpio_52 */ + {GPMC_NCS3, (IEN | M3)}, /* gpio_53 */ + {GPMC_NWP, (M3)}, /* gpio_54 */ + {GPMC_CLK, (PTD | M3)}, /* gpio_55 */ + {GPMC_NADV_ALE, (M3)}, /* gpio_56 */ + {GPMC_NBE0_CLE, (M3)}, /* gpio_59 */ + {GPMC_NBE1, (PTD | M3)}, /* gpio_60 */ + {GPMC_WAIT0, (PTU | IEN | M3)}, /* gpio_61 */ + {GPMC_WAIT1, (IEN | M3)}, /* gpio_62 */ + {C2C_DATA11, (PTD | M3)}, /* gpio_100 */ + {C2C_DATA12, (M1)}, /* dsi1_te0 */ + {C2C_DATA13, (PTD | M3)}, /* gpio_102 */ + {C2C_DATA14, (M1)}, /* dsi2_te0 */ + {C2C_DATA15, (PTD | M3)}, /* gpio_104 */ + {HDMI_HPD, (M0)}, /* hdmi_hpd */ + {HDMI_CEC, (M0)}, /* hdmi_cec */ + {HDMI_DDC_SCL, (PTU | M0)}, /* hdmi_ddc_scl */ + {HDMI_DDC_SDA, (PTU | IEN | M0)}, /* hdmi_ddc_sda */ + {CSI21_DX0, (IEN | M0)}, /* csi21_dx0 */ + {CSI21_DY0, (IEN | M0)}, /* csi21_dy0 */ + {CSI21_DX1, (IEN | M0)}, /* csi21_dx1 */ + {CSI21_DY1, (IEN | M0)}, /* csi21_dy1 */ + {CSI21_DX2, (IEN | M0)}, /* csi21_dx2 */ + {CSI21_DY2, (IEN | M0)}, /* csi21_dy2 */ + {CSI21_DX3, (PTD | M7)}, /* csi21_dx3 */ + {CSI21_DY3, (PTD | M7)}, /* csi21_dy3 */ + {CSI21_DX4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dx4 */ + {CSI21_DY4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dy4 */ + {CSI22_DX0, (IEN | M0)}, /* csi22_dx0 */ + {CSI22_DY0, (IEN | M0)}, /* csi22_dy0 */ + {CSI22_DX1, (IEN | M0)}, /* csi22_dx1 */ + {CSI22_DY1, (IEN | M0)}, /* csi22_dy1 */ + {CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_shutter */ + {CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_strobe */ + {CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_83 */ + {USBB1_ULPITLL_CLK, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_cawake */ + {USBB1_ULPITLL_STP, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_cadata */ + {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_caflag */ + {USBB1_ULPITLL_NXT, (OFF_EN | M1)}, /* hsi1_acready */ + {USBB1_ULPITLL_DAT0, (OFF_EN | M1)}, /* hsi1_acwake */ + {USBB1_ULPITLL_DAT1, (OFF_EN | M1)}, /* hsi1_acdata */ + {USBB1_ULPITLL_DAT2, (OFF_EN | M1)}, /* hsi1_acflag */ + {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_caready */ + {USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */ + {USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */ + {USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */ + {USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */ + {USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_data */ + {USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */ + {USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */ + {USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */ + {ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */ + {ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */ + {ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */ + {ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_fsx */ + {ABE_MCBSP1_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_clkx */ + {ABE_MCBSP1_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dr */ + {ABE_MCBSP1_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dx */ + {ABE_MCBSP1_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_fsx */ + {ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_ul_data */ + {ABE_PDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_dl_data */ + {ABE_PDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_frame */ + {ABE_PDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_lb_clk */ + {ABE_CLKS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_clks */ + {ABE_DMIC_CLK1, (M0)}, /* abe_dmic_clk1 */ + {ABE_DMIC_DIN1, (IEN | M0)}, /* abe_dmic_din1 */ + {ABE_DMIC_DIN2, (IEN | M0)}, /* abe_dmic_din2 */ + {ABE_DMIC_DIN3, (IEN | M0)}, /* abe_dmic_din3 */ + {UART2_CTS, (PTU | IEN | M0)}, /* uart2_cts */ + {UART2_RTS, (M0)}, /* uart2_rts */ + {UART2_RX, (PTU | IEN | M0)}, /* uart2_rx */ + {UART2_TX, (M0)}, /* uart2_tx */ + {HDQ_SIO, (M3)}, /* gpio_127 */ + {MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_clk */ + {MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_somi */ + {MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_simo */ + {MCSPI1_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_cs0 */ + {MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* mcspi1_cs1 */ + {MCSPI1_CS2, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_139 */ + {MCSPI1_CS3, (PTU | IEN | M3)}, /* gpio_140 */ + {SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc5_clk */ + {SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_cmd */ + {SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat0 */ + {SDMMC5_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat1 */ + {SDMMC5_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat2 */ + {SDMMC5_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat3 */ + {MCSPI4_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_clk */ + {MCSPI4_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_simo */ + {MCSPI4_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_somi */ + {MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_cs0 */ + {UART4_RX, (IEN | M0)}, /* uart4_rx */ + {UART4_TX, (M0)}, /* uart4_tx */ + {USBB2_ULPITLL_CLK, (PTD | IEN | M3)}, /* gpio_157 */ + {USBB2_ULPITLL_STP, (IEN | M5)}, /* dispc2_data23 */ + {USBB2_ULPITLL_DIR, (IEN | M5)}, /* dispc2_data22 */ + {USBB2_ULPITLL_NXT, (IEN | M5)}, /* dispc2_data21 */ + {USBB2_ULPITLL_DAT0, (IEN | M5)}, /* dispc2_data20 */ + {USBB2_ULPITLL_DAT1, (IEN | M5)}, /* dispc2_data19 */ + {USBB2_ULPITLL_DAT2, (IEN | M5)}, /* dispc2_data18 */ + {USBB2_ULPITLL_DAT3, (IEN | M5)}, /* dispc2_data15 */ + {USBB2_ULPITLL_DAT4, (IEN | M5)}, /* dispc2_data14 */ + {USBB2_ULPITLL_DAT5, (IEN | M5)}, /* dispc2_data13 */ + {USBB2_ULPITLL_DAT6, (IEN | M5)}, /* dispc2_data12 */ + {USBB2_ULPITLL_DAT7, (IEN | M5)}, /* dispc2_data11 */ + {USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_169 */ + {USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_170 */ + {UNIPRO_TX0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col0 */ + {UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col1 */ + {UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col2 */ + {UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col3 */ + {UNIPRO_TX2, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col4 */ + {UNIPRO_TY2, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col5 */ + {UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row0 */ + {UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row1 */ + {UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row2 */ + {UNIPRO_RY1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row3 */ + {UNIPRO_RX2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row4 */ + {UNIPRO_RY2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row5 */ + {USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* usba0_otg_ce */ + {USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */ + {USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */ + {FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */ + {FREF_CLK2_OUT, (M0)}, /* fref_clk2_out */ + {SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */ + {SYS_NIRQ2, (M7)}, /* sys_nirq2 */ + {SYS_BOOT0, (PTU | IEN | M3)}, /* gpio_184 */ + {SYS_BOOT1, (M3)}, /* gpio_185 */ + {SYS_BOOT2, (PTD | IEN | M3)}, /* gpio_186 */ + {SYS_BOOT3, (PTD | IEN | M3)}, /* gpio_187 */ + {SYS_BOOT4, (M3)}, /* gpio_188 */ + {SYS_BOOT5, (PTD | IEN | M3)}, /* gpio_189 */ + {DPM_EMU0, (IEN | M0)}, /* dpm_emu0 */ + {DPM_EMU1, (IEN | M0)}, /* dpm_emu1 */ + {DPM_EMU2, (IEN | M0)}, /* dpm_emu2 */ + {DPM_EMU3, (IEN | M5)}, /* dispc2_data10 */ + {DPM_EMU4, (IEN | M5)}, /* dispc2_data9 */ + {DPM_EMU5, (IEN | M5)}, /* dispc2_data16 */ + {DPM_EMU6, (IEN | M5)}, /* dispc2_data17 */ + {DPM_EMU7, (IEN | M5)}, /* dispc2_hsync */ + {DPM_EMU8, (IEN | M5)}, /* dispc2_pclk */ + {DPM_EMU9, (IEN | M5)}, /* dispc2_vsync */ + {DPM_EMU10, (IEN | M5)}, /* dispc2_de */ + {DPM_EMU11, (IEN | M5)}, /* dispc2_data8 */ + {DPM_EMU12, (IEN | M5)}, /* dispc2_data7 */ + {DPM_EMU13, (IEN | M5)}, /* dispc2_data6 */ + {DPM_EMU14, (IEN | M5)}, /* dispc2_data5 */ + {DPM_EMU15, (IEN | M5)}, /* dispc2_data4 */ + {DPM_EMU16, (M3)}, /* gpio_27 */ + {DPM_EMU17, (IEN | M5)}, /* dispc2_data2 */ + {DPM_EMU18, (IEN | M5)}, /* dispc2_data1 */ + {DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */ + {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */ + {I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */ + {I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */ + {I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */ + {I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */ + {I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */ + {I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */ + {I2C4_SDA, (PTU | IEN | M0)} /* i2c4_sda */ +}; + +const struct pad_conf_entry wkup_padconf_array_non_essential[] = { + {PAD0_SIM_IO, (IEN | M0)}, /* sim_io */ + {PAD1_SIM_CLK, (M0)}, /* sim_clk */ + {PAD0_SIM_RESET, (M0)}, /* sim_reset */ + {PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */ + {PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */ + {PAD1_FREF_XTAL_IN, (M0)}, /* # */ + {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */ + {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */ + {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */ + {PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)}, /* # */ + {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */ + {PAD1_FREF_CLK4_REQ, (PTU | IEN | M0)}, /* # */ + {PAD0_FREF_CLK4_OUT, (M0)}, /* # */ + {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */ + {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */ + {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */ + {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */ + {PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */ + {PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */ + {PAD1_FREF_CLK3_REQ, (M3)}, /* gpio_wk30 */ + {PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 */ + {PAD0_FREF_CLK4_OUT, (M3)}, /* gpio_wk8 */ +}; + +#endif /* _EVM4430_MUX_DATA_H */ diff --git a/board/ti/panda/Makefile b/board/ti/panda/Makefile index ec493f5c3..b299e2fff 100644 --- a/board/ti/panda/Makefile +++ b/board/ti/panda/Makefile @@ -25,9 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -ifndef CONFIG_SPL_BUILD COBJS := panda.o -endif SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c index 97320cb27..b4271fb58 100644 --- a/board/ti/panda/panda.c +++ b/board/ti/panda/panda.c @@ -65,6 +65,23 @@ int misc_init_r(void) return 0; } +void set_muxconf_regs_essential(void) +{ + do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential, + sizeof(core_padconf_array_essential) / + sizeof(struct pad_conf_entry)); + + do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential, + sizeof(wkup_padconf_array_essential) / + sizeof(struct pad_conf_entry)); + + if (omap_revision() >= OMAP4460_ES1_0) + do_set_mux(CONTROL_PADCONF_WKUP, + wkup_padconf_array_essential_4460, + sizeof(wkup_padconf_array_essential_4460) / + sizeof(struct pad_conf_entry)); +} + void set_muxconf_regs_non_essential(void) { do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential, @@ -93,10 +110,18 @@ void set_muxconf_regs_non_essential(void) sizeof(struct pad_conf_entry)); } -#ifdef CONFIG_GENERIC_MMC +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) int board_mmc_init(bd_t *bis) { omap_mmc_init(0); return 0; } #endif + +/* + * get_board_rev() - get board revision + */ +u32 get_board_rev(void) +{ + return 0x20; +} diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h index 83d0c3fd8..c05170e33 100644 --- a/board/ti/panda/panda_mux_data.h +++ b/board/ti/panda/panda_mux_data.h @@ -28,6 +28,58 @@ #include <asm/arch/mux_omap4.h> + +const struct pad_conf_entry core_padconf_array_essential[] = { + +{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */ +{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */ +{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */ +{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */ +{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */ +{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */ +{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */ +{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */ +{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */ +{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */ +{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */ +{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */ +{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */ +{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */ +{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */ +{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */ +{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */ +{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */ +{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */ +{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */ +{I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */ +{I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */ +{I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */ +{I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */ +{I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */ +{I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */ +{I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */ +{I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */ +{UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */ +{UART3_RTS_SD, (M0)}, /* uart3_rts_sd */ +{UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */ +{UART3_TX_IRTX, (M0)} /* uart3_tx */ + +}; + +const struct pad_conf_entry wkup_padconf_array_essential[] = { + +{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */ +{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */ +{PAD1_SYS_32K, (IEN | M0)} /* sys_32k */ + +}; + +const struct pad_conf_entry wkup_padconf_array_essential_4460[] = { + +{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7, TPS */ + +}; + const struct pad_conf_entry core_padconf_array_non_essential[] = { {GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_32 */ {GPMC_AD9, (PTU | IEN | M3)}, /* gpio_33 */ @@ -219,7 +271,7 @@ const struct pad_conf_entry wkup_padconf_array_non_essential[] = { {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */ {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */ {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */ - {PAD1_FREF_CLK3_REQ, M7}, /* safe mode */ + {PAD1_FREF_CLK3_REQ, M7}, /* safe mode */ {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */ {PAD0_FREF_CLK4_OUT, (PTU | M3)}, /* led status_2 */ {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */ diff --git a/board/ti/sdp4430/Makefile b/board/ti/sdp4430/Makefile index 806fdf476..72ad3eb07 100644 --- a/board/ti/sdp4430/Makefile +++ b/board/ti/sdp4430/Makefile @@ -25,8 +25,10 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o +COBJS := sdp.o + ifndef CONFIG_SPL_BUILD -COBJS := sdp.o cmd_bat.o +COBJS += cmd_bat.o endif SRCS := $(COBJS:.o=.c) diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c index a5ea6829c..e1b853c4e 100644 --- a/board/ti/sdp4430/sdp.c +++ b/board/ti/sdp4430/sdp.c @@ -70,6 +70,23 @@ int misc_init_r(void) return 0; } +void set_muxconf_regs_essential(void) +{ + do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential, + sizeof(core_padconf_array_essential) / + sizeof(struct pad_conf_entry)); + + do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential, + sizeof(wkup_padconf_array_essential) / + sizeof(struct pad_conf_entry)); + + if (omap_revision() >= OMAP4460_ES1_0) + do_set_mux(CONTROL_PADCONF_WKUP, + wkup_padconf_array_essential_4460, + sizeof(wkup_padconf_array_essential_4460) / + sizeof(struct pad_conf_entry)); +} + void set_muxconf_regs_non_essential(void) { do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential, @@ -81,7 +98,7 @@ void set_muxconf_regs_non_essential(void) sizeof(struct pad_conf_entry)); } -#ifdef CONFIG_GENERIC_MMC +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) int board_mmc_init(bd_t *bis) { omap_mmc_init(0); @@ -89,3 +106,11 @@ int board_mmc_init(bd_t *bis) return 0; } #endif + +/* + * get_board_rev() - get board revision + */ +u32 get_board_rev(void) +{ + return 0x20; +} diff --git a/board/ti/sdp4430/sdp4430_mux_data.h b/board/ti/sdp4430/sdp4430_mux_data.h index 06efaeaa4..1c6e0eeb6 100644 --- a/board/ti/sdp4430/sdp4430_mux_data.h +++ b/board/ti/sdp4430/sdp4430_mux_data.h @@ -28,6 +28,49 @@ #include <asm/arch/mux_omap4.h> +const struct pad_conf_entry core_padconf_array_essential[] = { + +{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */ +{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */ +{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */ +{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */ +{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */ +{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */ +{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */ +{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */ +{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */ +{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */ +{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */ +{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */ +{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */ +{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */ +{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */ +{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */ +{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */ +{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */ +{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */ +{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */ +{UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */ +{UART3_RTS_SD, (M0)}, /* uart3_rts_sd */ +{UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */ +{UART3_TX_IRTX, (M0)} /* uart3_tx */ + +}; + +const struct pad_conf_entry wkup_padconf_array_essential[] = { + +{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */ +{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */ +{PAD1_SYS_32K, (IEN | M0)} /* sys_32k */ + +}; + +const struct pad_conf_entry wkup_padconf_array_essential_4460[] = { + +{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7, TPS */ + +}; + const struct pad_conf_entry core_padconf_array_non_essential[] = { {GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_32 */ {GPMC_AD9, (PTU | IEN | M3)}, /* gpio_33 */ @@ -200,6 +243,15 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = { {DPM_EMU17, (IEN | M5)}, /* dispc2_data2 */ {DPM_EMU18, (IEN | M5)}, /* dispc2_data1 */ {DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */ + {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */ + {I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */ + {I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */ + {I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */ + {I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */ + {I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */ + {I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */ + {I2C4_SDA, (PTU | IEN | M0)} /* i2c4_sda */ + }; const struct pad_conf_entry wkup_padconf_array_non_essential[] = { @@ -214,7 +266,6 @@ const struct pad_conf_entry wkup_padconf_array_non_essential[] = { {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */ {PAD1_FREF_CLK3_REQ, (M3)}, /* gpio_wk30 - Debug led-1 */ {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */ - {PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 - Debug led-2 */ {PAD0_FREF_CLK4_OUT, (M3)}, /* gpio_wk8 - Debug led-3 */ {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */ {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */ diff --git a/board/vpac270/vpac270.c b/board/vpac270/vpac270.c index 43bbdff70..cf8e7b61d 100644 --- a/board/vpac270/vpac270.c +++ b/board/vpac270/vpac270.c @@ -21,6 +21,7 @@ #include <common.h> #include <asm/arch/hardware.h> +#include <asm/arch/regs-mmc.h> #include <netdev.h> #include <serial.h> #include <asm/io.h> @@ -72,6 +73,14 @@ void dram_init_banksize(void) #endif } +#ifdef CONFIG_CMD_MMC +int board_mmc_init(bd_t *bis) +{ + pxa_mmc_register(0); + return 0; +} +#endif + #ifdef CONFIG_CMD_USB int usb_board_init(void) { diff --git a/boards.cfg b/boards.cfg index 5304f80b1..c83d8616e 100644 --- a/boards.cfg +++ b/boards.cfg @@ -35,7 +35,7 @@ # Target ARCH CPU Board name Vendor SoC Options ########################################################################################################### -integratorcp_cm1136 arm arm1136 integrator armltd - integratorcp +integratorcp_cm1136 arm arm1136 integrator armltd - integratorcp:CM1136 qong arm arm1136 - davedenx mx31 mx31ads arm arm1136 - freescale mx31 imx31_litekit arm arm1136 - logicpd mx31 @@ -47,9 +47,9 @@ flea3 arm arm1136 - CarMedi mx35pdk arm arm1136 - freescale mx35 omap2420h4 arm arm1136 - ti omap24xx tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x -integratorap_cm720t arm arm720t integrator armltd - integratorap -integratorap_cm920t arm arm920t integrator armltd - integratorap -integratorcp_cm920t arm arm920t integrator armltd - integratorcp +integratorap_cm720t arm arm720t integrator armltd - integratorap:CM720T +integratorap_cm920t arm arm920t integrator armltd - integratorap:CM920T +integratorcp_cm920t arm arm920t integrator armltd - integratorcp:CM920T a320evb arm arm920t - faraday a320 at91rm9200ek arm arm920t at91rm9200ek atmel at91 at91rm9200ek at91rm9200ek_ram arm arm920t at91rm9200ek atmel at91 at91rm9200ek:RAMBOOT @@ -63,8 +63,8 @@ cm41xx arm arm920t - - VCMA9 arm arm920t vcma9 mpl s3c24x0 smdk2410 arm arm920t - samsung s3c24x0 omap1510inn arm arm925t - ti -integratorap_cm926ejs arm arm926ejs integrator armltd - integratorap -integratorcp_cm926ejs arm arm926ejs integrator armltd - integratorcp +integratorap_cm926ejs arm arm926ejs integrator armltd - integratorap:CM926EJ_S +integratorcp_cm926ejs arm arm926ejs integrator armltd - integratorcp:CM924EJ_S versatileqemu arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_QEMU,ARCH_VERSATILE_PB versatilepb arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_PB versatileab arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_AB @@ -121,6 +121,7 @@ pm9263 arm arm926ejs pm9263 ronetix pm9g45 arm arm926ejs pm9g45 ronetix at91 pm9g45:AT91SAM9G45 da830evm arm arm926ejs da8xxevm davinci davinci da850evm arm arm926ejs da8xxevm davinci davinci +da850_am18xxevm arm arm926ejs da8xxevm davinci davinci cam_enc_4xx arm arm926ejs cam_enc_4xx ait davinci cam_enc_4xx hawkboard arm arm926ejs da8xxevm davinci davinci hawkboard_nand arm arm926ejs da8xxevm davinci davinci hawkboard:NAND_U_BOOT @@ -130,6 +131,7 @@ davinci_dm355evm arm arm926ejs dm355evm davinci davinci_dm355leopard arm arm926ejs dm355leopard davinci davinci davinci_dm365evm arm arm926ejs dm365evm davinci davinci davinci_dm6467evm arm arm926ejs dm6467evm davinci davinci +davinci_dm6467Tevm arm arm926ejs dm6467evm davinci davinci davinci_dvevm arm arm926ejs dvevm davinci davinci davinci_schmoogie arm arm926ejs schmoogie davinci davinci davinci_sffsdr arm arm926ejs sffsdr davinci davinci @@ -156,13 +158,14 @@ tx25 arm arm926ejs tx25 karo zmx25 arm arm926ejs zmx25 syteco mx25 imx27lite arm arm926ejs imx27lite logicpd mx27 magnesium arm arm926ejs imx27lite logicpd mx27 +m28evk arm arm926ejs - denx mx28 nhk8815 arm arm926ejs nhk8815 st nomadik nhk8815_onenand arm arm926ejs nhk8815 st nomadik nhk8815:BOOT_ONENAND omap5912osk arm arm926ejs - ti omap edminiv2 arm arm926ejs - LaCie orion5x dkb arm arm926ejs - Marvell pantheon -integratorap_cm946es arm arm946es integrator armltd - integratorap -integratorcp_cm946es arm arm946es integrator armltd - integratorcp +integratorap_cm946es arm arm946es integrator armltd - integratorap:CM946ES +integratorcp_cm946es arm arm946es integrator armltd - integratorcp:CM946ES ca9x4_ct_vxp arm armv7 vexpress armltd highbank arm armv7 highbank - highbank am335x_evm arm armv7 am335x ti am33xx @@ -193,6 +196,7 @@ omap3_sdp3430 arm armv7 sdp3430 ti devkit8000 arm armv7 devkit8000 timll omap3 omap4_panda arm armv7 panda ti omap4 omap4_sdp4430 arm armv7 sdp4430 ti omap4 +omap5_evm arm armv7 omap5_evm ti omap5 s5p_goni arm armv7 goni samsung s5pc1xx smdkc100 arm armv7 smdkc100 samsung s5pc1xx origen arm armv7 origen samsung s5pc2xx @@ -213,8 +217,6 @@ balloon3 arm pxa cerf250 arm pxa colibri_pxa270 arm pxa cradle arm pxa -csb226 arm pxa -innokom arm pxa lubbock arm pxa palmld arm pxa palmtc arm pxa diff --git a/common/usb.c b/common/usb.c index bed511650..4418c70f4 100644 --- a/common/usb.c +++ b/common/usb.c @@ -263,18 +263,24 @@ int usb_maxpacket(struct usb_device *dev, unsigned long pipe) return dev->epmaxpacketin[((pipe>>15) & 0xf)]; } -/* The routine usb_set_maxpacket_ep() is extracted from the loop of routine +/* + * The routine usb_set_maxpacket_ep() is extracted from the loop of routine * usb_set_maxpacket(), because the optimizer of GCC 4.x chokes on this routine * when it is inlined in 1 single routine. What happens is that the register r3 * is used as loop-count 'i', but gets overwritten later on. * This is clearly a compiler bug, but it is easier to workaround it here than * to update the compiler (Occurs with at least several GCC 4.{1,2},x * CodeSourcery compilers like e.g. 2007q3, 2008q1, 2008q3 lite editions on ARM) + * + * NOTE: Similar behaviour was observed with GCC4.6 on ARMv5. */ static void __attribute__((noinline)) -usb_set_maxpacket_ep(struct usb_device *dev, struct usb_endpoint_descriptor *ep) +usb_set_maxpacket_ep(struct usb_device *dev, int if_idx, int ep_idx) { int b; + struct usb_endpoint_descriptor *ep; + + ep = &dev->config.if_desc[if_idx].ep_desc[ep_idx]; b = ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; @@ -313,8 +319,7 @@ int usb_set_maxpacket(struct usb_device *dev) for (i = 0; i < dev->config.desc.bNumInterfaces; i++) for (ii = 0; ii < dev->config.if_desc[i].desc.bNumEndpoints; ii++) - usb_set_maxpacket_ep(dev, - &dev->config.if_desc[i].ep_desc[ii]); + usb_set_maxpacket_ep(dev, i, ii); return 0; } diff --git a/doc/README.m28 b/doc/README.m28 new file mode 100644 index 000000000..b749ce022 --- /dev/null +++ b/doc/README.m28 @@ -0,0 +1,223 @@ +DENX M28EVK +=========== + +This document describes the DENX M28/M28EVK U-Boot port. This document mostly +covers topics related to making the module/board bootable. + +Terminology +----------- + +The dollar symbol ($) introduces a snipped of shell code. This shall be typed +into the unix command prompt in U-Boot source code root directory. + +The (=>) introduces a snipped of code that should by typed into U-Boot command +prompt. + +Contents +-------- + +0) Files of the M28/M28EVK port +1) Prerequisites +2) Compiling U-Boot for M28 +3) Installation of U-Boot for M28EVK to SD card +4) Installation of U-Boot for M28 to NAND flash + +0) Files of the M28/M28EVK port +------------------------------- + +arch/arm/cpu/arm926ejs/mx28/ - The CPU support code for the Freescale i.MX28 +arch/arm/include/asm/arch-mx28/ - Header files for the Freescale i.MX28 +board/denx/m28evk/ - M28EVK board specific files +include/configs/m28evk.h - M28EVK configuration file + +1) Prerequisites +---------------- + +To make the M28 module or the M28 module or M28EVK board bootable, some tools +are necessary. The first one is the "elftosb" tool distributed by Freescale +Semiconductor. The other tool is the "mxsboot" tool found in U-Boot source tree. + +Firstly, obtain the elftosb archive from the following location: + + http://foss.doredevelopment.dk/mirrors/imx/elftosb-10.12.01.tar.gz + +We use a $VER variable here to denote the current version. At the time of +writing of this document, that is "10.12.01". To obtain the file from command +line, use: + + $ VER="10.12.01" + $ wget http://foss.doredevelopment.dk/mirrors/imx/elftosb-${VER}.tar.gz + +Extract the file: + + $ tar xzf elftosb-${VER}.tar.gz + +Compile the file. We need to manually tell the linker to use also libm: + + $ cd elftosb-${VER}/ + $ make LIBS="-lstdc++ -lm" elftosb + +Optionally, remove debugging symbols from elftosb: + + $ strip bld/linux/elftosb + +Finally, install the "elftosb" binary. The "install" target is missing, so just +copy the binary by hand: + + $ sudo cp bld/linux/elftosb /usr/local/bin/ + +Make sure the "elftosb" binary can be found in your $PATH, in this case this +means "/usr/local/bin/" has to be in your $PATH. + +2) Compiling U-Boot for M28 +--------------------------- + +Compiling the U-Boot for M28 is straightforward and done as compiling U-Boot +for any other ARM device. For cross-compiler setup, please refer to ELDK5.0 +documentation. First, clean up the source code: + + $ make mrproper + +Next, configure U-Boot for M28EVK: + + $ make m28evk_config + +Lastly, compile U-Boot and prepare a "BootStream". The "BootStream" is a special +type of file, which the i.MX28 CPU can boot. This is handled by the following +command: + + $ make u-boot.sb + +HINT: To speed-up the build process, you can add -j<N>, where N is number of + compiler instances that'll run in parallel. + +The code produces "u-boot.sb" file. This file needs to be augmented with a +proper header to allow successful boot from SD or NAND. Adding the header is +discussed in the following chapters. + +3) Installation of U-Boot for M28EVK to SD card +----------------------------------------------- + +To boot an M28 from SD, set the boot mode DIP switches according to i.MX28 +manual chapter 12.2.1 (Table 12-2), PORT=SSP0, SD/MMC master on SSP0, 3.3V. + +An SD card the i.MX28 CPU can use to boot U-Boot must contain a DOS partition +table, which in turn carries a partition of special type and which contains a +special header. The rest of partitions in the DOS partition table can be used +by the user. + +To prepare such partition, use your favourite partitioning tool. The partition +must have the following parameters: + + * Start sector .......... sector 2048 + * Partition size ........ at least 1024 kb + * Partition type ........ 0x53 (sometimes "OnTrack DM6 Aux3") + +For example in Linux fdisk, the sequence for a clear card is the following: + + * o ..................... create a clear partition table + * n ..................... create new partition + * p ............. primary partition + * 1 ............. first partition + * 2048 .......... first sector is 2048 + * +1M ........... make the partition 1Mb big + * t 1 ................... change first partition ID + * 53 ............ change the ID to 0x53 (OnTrack DM6 Aux3) + * <create other partitions> + * w ..................... write partition table to disk + +The partition layout is ready, next the special partition must be filled with +proper contents. The contents is generated by running the following command (see +chapter 2)): + + $ ./tools/mxsboot sd u-boot.sb u-boot.sd + +The resulting file, "u-boot.sd", shall then be written to the partition. In this +case, we assume the first partition of the SD card is /dev/mmcblk0p1: + + $ dd if=u-boot.sd of=/dev/mmcblk0p1 + +Last step is to insert the card into M28EVK and boot. + +NOTE: If the user needs to adjust the start sector, the "mxsboot" tool contains + a "-p" switch for that purpose. The "-p" switch takes the sector number as + an argument. + +4) Installation of U-Boot for M28 to NAND flash +----------------------------------------------- + +To boot an M28 from NAND, set the boot mode DIP switches according to i.MX28 +manual chapter 12.2.1 (Table 12-2), PORT=GPMI, NAND 1.8 V. + +There are two possibilities when preparing an image writable to NAND flash. + + I) The NAND wasn't written at all yet or the BCB is broken + ---------------------------------------------------------- + In this case, both BCB (FCB and DBBT) and firmware needs to be + written to NAND. To generate NAND image containing all these, + there is a tool called "mxsboot" in the "tools/" directory. The tool + is invoked on "u-boot.sb" file from chapter 2): + + $ ./tools/mxsboot nand u-boot.sb u-boot.nand + + NOTE: The above invokation works for NAND flash with geometry of + 2048b per page, 64b OOB data, 128kb erase size. If your chip + has a different geometry, please use: + + -w <size> change page size (default 2048 b) + -o <size> change oob size (default 64 b) + -e <size> change erase size (default 131072 b) + + The geometry information can be obtained from running U-Boot + on M28 by issuing the "nand info" command. + + The resulting file, "u-boot.nand" can be written directly to NAND + from the U-Boot prompt. To simplify the process, the U-Boot default + environment contains script "update_nand_full" to update the system. + + This script expects a working TFTP server containing the file + "u-boot.nand" in it's root directory. This can be changed by + adjusting the "update_nand_full_filename" varible. + + To update the system, run the following in U-Boot prompt: + + => run update_nand_full + + In case you would only need to update the bootloader in future, + see II) below. + + II) The NAND was already written with a good BCB + ------------------------------------------------ + This part applies after the part I) above was done at least once. + + If part I) above was done correctly already, there is no need to + write the FCB and DBBT parts of NAND again. It's possible to upgrade + only the bootloader image. + + To simplify the process of firmware update, the U-Boot default + environment contains script "update_nand_firmware" to update only + the firmware, without rewriting FCB and DBBT. + + This script expects a working TFTP server containing the file + "u-boot.sb" in it's root directory. This can be changed by + adjusting the "update_nand_firmware_filename" varible. + + To update the system, run the following in U-Boot prompt: + + => run update_nand_firmware + + III) Special settings for the update scripts + -------------------------------------------- + There is a slight possibility of the user wanting to adjust the + STRIDE and COUNT options of the NAND boot. For description of these, + see i.MX28 manual section 12.12.1.2 and 12.12.1.3. + + The update scripts take this possibility into account. In case the + user changes STRIDE by blowing fuses, the user also has to change + "update_nand_stride" variable. In case the user changes COUNT by + blowing fuses, the user also has to change "update_nand_count" + variable for the update scripts to work correctly. + + In case the user needs to boot a firmware image bigger than 1Mb, the + user has to adjust the "update_nand_firmware_maxsz" variable for the + update scripts to work properly. diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 3d9c9f11a..5d864b56e 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk LIB := $(obj)libdma.o COBJS-$(CONFIG_FSLDMAFEC) += MCD_tasksInit.o MCD_dmaApi.o MCD_tasks.o +COBJS-$(CONFIG_APBH_DMA) += apbh_dma.o COBJS-$(CONFIG_FSL_DMA) += fsl_dma.o COBJS-$(CONFIG_OMAP3_DMA) += omap3_dma.o diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c new file mode 100644 index 000000000..69a10428e --- /dev/null +++ b/drivers/dma/apbh_dma.c @@ -0,0 +1,691 @@ +/* + * Freescale i.MX28 APBH DMA driver + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/list.h> + +#include <common.h> +#include <malloc.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/dma.h> + +static struct mxs_dma_chan mxs_dma_channels[MXS_MAX_DMA_CHANNELS]; + +/* + * Test is the DMA channel is valid channel + */ +int mxs_dma_validate_chan(int channel) +{ + struct mxs_dma_chan *pchan; + + if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS)) + return -EINVAL; + + pchan = mxs_dma_channels + channel; + if (!(pchan->flags & MXS_DMA_FLAGS_ALLOCATED)) + return -EINVAL; + + return 0; +} + +/* + * Enable a DMA channel. + * + * If the given channel has any DMA descriptors on its active list, this + * function causes the DMA hardware to begin processing them. + * + * This function marks the DMA channel as "busy," whether or not there are any + * descriptors to process. + */ +int mxs_dma_enable(int channel) +{ + struct mx28_apbh_regs *apbh_regs = + (struct mx28_apbh_regs *)MXS_APBH_BASE; + unsigned int sem; + struct mxs_dma_chan *pchan; + struct mxs_dma_desc *pdesc; + int ret; + + ret = mxs_dma_validate_chan(channel); + if (ret) + return ret; + + pchan = mxs_dma_channels + channel; + + if (pchan->pending_num == 0) { + pchan->flags |= MXS_DMA_FLAGS_BUSY; + return 0; + } + + pdesc = list_first_entry(&pchan->active, struct mxs_dma_desc, node); + if (pdesc == NULL) + return -EFAULT; + + if (pchan->flags & MXS_DMA_FLAGS_BUSY) { + if (!(pdesc->cmd.data & MXS_DMA_DESC_CHAIN)) + return 0; + + sem = mxs_dma_read_semaphore(channel); + if (sem == 0) + return 0; + + if (sem == 1) { + pdesc = list_entry(pdesc->node.next, + struct mxs_dma_desc, node); + writel(mxs_dma_cmd_address(pdesc), + &apbh_regs->ch[channel].hw_apbh_ch_nxtcmdar); + } + writel(pchan->pending_num, + &apbh_regs->ch[channel].hw_apbh_ch_sema); + pchan->active_num += pchan->pending_num; + pchan->pending_num = 0; + } else { + pchan->active_num += pchan->pending_num; + pchan->pending_num = 0; + writel(mxs_dma_cmd_address(pdesc), + &apbh_regs->ch[channel].hw_apbh_ch_nxtcmdar); + writel(pchan->active_num, + &apbh_regs->ch[channel].hw_apbh_ch_sema); + writel(1 << (channel + APBH_CTRL0_CLKGATE_CHANNEL_OFFSET), + &apbh_regs->hw_apbh_ctrl0_clr); + } + + pchan->flags |= MXS_DMA_FLAGS_BUSY; + return 0; +} + +/* + * Disable a DMA channel. + * + * This function shuts down a DMA channel and marks it as "not busy." Any + * descriptors on the active list are immediately moved to the head of the + * "done" list, whether or not they have actually been processed by the + * hardware. The "ready" flags of these descriptors are NOT cleared, so they + * still appear to be active. + * + * This function immediately shuts down a DMA channel's hardware, aborting any + * I/O that may be in progress, potentially leaving I/O hardware in an undefined + * state. It is unwise to call this function if there is ANY chance the hardware + * is still processing a command. + */ +int mxs_dma_disable(int channel) +{ + struct mxs_dma_chan *pchan; + struct mx28_apbh_regs *apbh_regs = + (struct mx28_apbh_regs *)MXS_APBH_BASE; + int ret; + + ret = mxs_dma_validate_chan(channel); + if (ret) + return ret; + + pchan = mxs_dma_channels + channel; + + if (!(pchan->flags & MXS_DMA_FLAGS_BUSY)) + return -EINVAL; + + writel(1 << (channel + APBH_CTRL0_CLKGATE_CHANNEL_OFFSET), + &apbh_regs->hw_apbh_ctrl0_set); + + pchan->flags &= ~MXS_DMA_FLAGS_BUSY; + pchan->active_num = 0; + pchan->pending_num = 0; + list_splice_init(&pchan->active, &pchan->done); + + return 0; +} + +/* + * Resets the DMA channel hardware. + */ +int mxs_dma_reset(int channel) +{ + struct mx28_apbh_regs *apbh_regs = + (struct mx28_apbh_regs *)MXS_APBH_BASE; + int ret; + + ret = mxs_dma_validate_chan(channel); + if (ret) + return ret; + + writel(1 << (channel + APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET), + &apbh_regs->hw_apbh_channel_ctrl_set); + + return 0; +} + +/* + * Freeze a DMA channel. + * + * This function causes the channel to continuously fail arbitration for bus + * access, which halts all forward progress without losing any state. A call to + * mxs_dma_unfreeze() will cause the channel to continue its current operation + * with no ill effect. + */ +int mxs_dma_freeze(int channel) +{ + struct mx28_apbh_regs *apbh_regs = + (struct mx28_apbh_regs *)MXS_APBH_BASE; + int ret; + + ret = mxs_dma_validate_chan(channel); + if (ret) + return ret; + + writel(1 << (channel + APBH_CHANNEL_CTRL_FREEZE_CHANNEL_OFFSET), + &apbh_regs->hw_apbh_channel_ctrl_set); + + return 0; +} + +/* + * Unfreeze a DMA channel. + * + * This function reverses the effect of mxs_dma_freeze(), enabling the DMA + * channel to continue from where it was frozen. + */ +int mxs_dma_unfreeze(int channel) +{ + struct mx28_apbh_regs *apbh_regs = + (struct mx28_apbh_regs *)MXS_APBH_BASE; + int ret; + + ret = mxs_dma_validate_chan(channel); + if (ret) + return ret; + + writel(1 << (channel + APBH_CHANNEL_CTRL_FREEZE_CHANNEL_OFFSET), + &apbh_regs->hw_apbh_channel_ctrl_clr); + + return 0; +} + +/* + * Read a DMA channel's hardware semaphore. + * + * As used by the MXS platform's DMA software, the DMA channel's hardware + * semaphore reflects the number of DMA commands the hardware will process, but + * has not yet finished. This is a volatile value read directly from hardware, + * so it must be be viewed as immediately stale. + * + * If the channel is not marked busy, or has finished processing all its + * commands, this value should be zero. + * + * See mxs_dma_append() for details on how DMA command blocks must be configured + * to maintain the expected behavior of the semaphore's value. + */ +int mxs_dma_read_semaphore(int channel) +{ + struct mx28_apbh_regs *apbh_regs = + (struct mx28_apbh_regs *)MXS_APBH_BASE; + uint32_t tmp; + int ret; + + ret = mxs_dma_validate_chan(channel); + if (ret) + return ret; + + tmp = readl(&apbh_regs->ch[channel].hw_apbh_ch_sema); + + tmp &= APBH_CHn_SEMA_PHORE_MASK; + tmp >>= APBH_CHn_SEMA_PHORE_OFFSET; + + return tmp; +} + +/* + * Enable or disable DMA interrupt. + * + * This function enables the given DMA channel to interrupt the CPU. + */ +int mxs_dma_enable_irq(int channel, int enable) +{ + struct mx28_apbh_regs *apbh_regs = + (struct mx28_apbh_regs *)MXS_APBH_BASE; + int ret; + + ret = mxs_dma_validate_chan(channel); + if (ret) + return ret; + + if (enable) + writel(1 << (channel + APBH_CTRL1_CH_CMDCMPLT_IRQ_EN_OFFSET), + &apbh_regs->hw_apbh_ctrl1_set); + else + writel(1 << (channel + APBH_CTRL1_CH_CMDCMPLT_IRQ_EN_OFFSET), + &apbh_regs->hw_apbh_ctrl1_clr); + + return 0; +} + +/* + * Check if a DMA interrupt is pending. + */ +int mxs_dma_irq_is_pending(int channel) +{ + struct mx28_apbh_regs *apbh_regs = + (struct mx28_apbh_regs *)MXS_APBH_BASE; + uint32_t tmp; + int ret; + + ret = mxs_dma_validate_chan(channel); + if (ret) + return ret; + + tmp = readl(&apbh_regs->hw_apbh_ctrl1); + tmp |= readl(&apbh_regs->hw_apbh_ctrl2); + + return (tmp >> channel) & 1; +} + +/* + * Clear DMA interrupt. + * + * The software that is using the DMA channel must register to receive its + * interrupts and, when they arrive, must call this function to clear them. + */ +int mxs_dma_ack_irq(int channel) +{ + struct mx28_apbh_regs *apbh_regs = + (struct mx28_apbh_regs *)MXS_APBH_BASE; + int ret; + + ret = mxs_dma_validate_chan(channel); + if (ret) + return ret; + + writel(1 << channel, &apbh_regs->hw_apbh_ctrl1_clr); + writel(1 << channel, &apbh_regs->hw_apbh_ctrl2_clr); + + return 0; +} + +/* + * Request to reserve a DMA channel + */ +int mxs_dma_request(int channel) +{ + struct mxs_dma_chan *pchan; + + if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS)) + return -EINVAL; + + pchan = mxs_dma_channels + channel; + if ((pchan->flags & MXS_DMA_FLAGS_VALID) != MXS_DMA_FLAGS_VALID) + return -ENODEV; + + if (pchan->flags & MXS_DMA_FLAGS_ALLOCATED) + return -EBUSY; + + pchan->flags |= MXS_DMA_FLAGS_ALLOCATED; + pchan->active_num = 0; + pchan->pending_num = 0; + + INIT_LIST_HEAD(&pchan->active); + INIT_LIST_HEAD(&pchan->done); + + return 0; +} + +/* + * Release a DMA channel. + * + * This function releases a DMA channel from its current owner. + * + * The channel will NOT be released if it's marked "busy" (see + * mxs_dma_enable()). + */ +int mxs_dma_release(int channel) +{ + struct mxs_dma_chan *pchan; + int ret; + + ret = mxs_dma_validate_chan(channel); + if (ret) + return ret; + + pchan = mxs_dma_channels + channel; + + if (pchan->flags & MXS_DMA_FLAGS_BUSY) + return -EBUSY; + + pchan->dev = 0; + pchan->active_num = 0; + pchan->pending_num = 0; + pchan->flags &= ~MXS_DMA_FLAGS_ALLOCATED; + + return 0; +} + +/* + * Allocate DMA descriptor + */ +struct mxs_dma_desc *mxs_dma_desc_alloc(void) +{ + struct mxs_dma_desc *pdesc; + + pdesc = memalign(MXS_DMA_ALIGNMENT, sizeof(struct mxs_dma_desc)); + + if (pdesc == NULL) + return NULL; + + memset(pdesc, 0, sizeof(*pdesc)); + pdesc->address = (dma_addr_t)pdesc; + + return pdesc; +}; + +/* + * Free DMA descriptor + */ +void mxs_dma_desc_free(struct mxs_dma_desc *pdesc) +{ + if (pdesc == NULL) + return; + + free(pdesc); +} + +/* + * Return the address of the command within a descriptor. + */ +unsigned int mxs_dma_cmd_address(struct mxs_dma_desc *desc) +{ + return desc->address + offsetof(struct mxs_dma_desc, cmd); +} + +/* + * Check if descriptor is on a channel's active list. + * + * This function returns the state of a descriptor's "ready" flag. This flag is + * usually set only if the descriptor appears on a channel's active list. The + * descriptor may or may not have already been processed by the hardware. + * + * The "ready" flag is set when the descriptor is submitted to a channel by a + * call to mxs_dma_append() or mxs_dma_append_list(). The "ready" flag is + * cleared when a processed descriptor is moved off the active list by a call + * to mxs_dma_finish(). The "ready" flag is NOT cleared if the descriptor is + * aborted by a call to mxs_dma_disable(). + */ +int mxs_dma_desc_pending(struct mxs_dma_desc *pdesc) +{ + return pdesc->flags & MXS_DMA_DESC_READY; +} + +/* + * Add a DMA descriptor to a channel. + * + * If the descriptor list for this channel is not empty, this function sets the + * CHAIN bit and the NEXTCMD_ADDR fields in the last descriptor's DMA command so + * it will chain to the new descriptor's command. + * + * Then, this function marks the new descriptor as "ready," adds it to the end + * of the active descriptor list, and increments the count of pending + * descriptors. + * + * The MXS platform DMA software imposes some rules on DMA commands to maintain + * important invariants. These rules are NOT checked, but they must be carefully + * applied by software that uses MXS DMA channels. + * + * Invariant: + * The DMA channel's hardware semaphore must reflect the number of DMA + * commands the hardware will process, but has not yet finished. + * + * Explanation: + * A DMA channel begins processing commands when its hardware semaphore is + * written with a value greater than zero, and it stops processing commands + * when the semaphore returns to zero. + * + * When a channel finishes a DMA command, it will decrement its semaphore if + * the DECREMENT_SEMAPHORE bit is set in that command's flags bits. + * + * In principle, it's not necessary for the DECREMENT_SEMAPHORE to be set, + * unless it suits the purposes of the software. For example, one could + * construct a series of five DMA commands, with the DECREMENT_SEMAPHORE + * bit set only in the last one. Then, setting the DMA channel's hardware + * semaphore to one would cause the entire series of five commands to be + * processed. However, this example would violate the invariant given above. + * + * Rule: + * ALL DMA commands MUST have the DECREMENT_SEMAPHORE bit set so that the DMA + * channel's hardware semaphore will be decremented EVERY time a command is + * processed. + */ +int mxs_dma_desc_append(int channel, struct mxs_dma_desc *pdesc) +{ + struct mxs_dma_chan *pchan; + struct mxs_dma_desc *last; + int ret; + + ret = mxs_dma_validate_chan(channel); + if (ret) + return ret; + + pchan = mxs_dma_channels + channel; + + pdesc->cmd.next = mxs_dma_cmd_address(pdesc); + pdesc->flags |= MXS_DMA_DESC_FIRST | MXS_DMA_DESC_LAST; + + if (!list_empty(&pchan->active)) { + last = list_entry(pchan->active.prev, struct mxs_dma_desc, + node); + + pdesc->flags &= ~MXS_DMA_DESC_FIRST; + last->flags &= ~MXS_DMA_DESC_LAST; + + last->cmd.next = mxs_dma_cmd_address(pdesc); + last->cmd.data |= MXS_DMA_DESC_CHAIN; + } + pdesc->flags |= MXS_DMA_DESC_READY; + if (pdesc->flags & MXS_DMA_DESC_FIRST) + pchan->pending_num++; + list_add_tail(&pdesc->node, &pchan->active); + + return ret; +} + +/* + * Retrieve processed DMA descriptors. + * + * This function moves all the descriptors from the DMA channel's "done" list to + * the head of the given list. + */ +int mxs_dma_get_finished(int channel, struct list_head *head) +{ + struct mxs_dma_chan *pchan; + int ret; + + ret = mxs_dma_validate_chan(channel); + if (ret) + return ret; + + if (head == NULL) + return 0; + + pchan = mxs_dma_channels + channel; + + list_splice(&pchan->done, head); + + return 0; +} + +/* + * Clean up processed DMA descriptors. + * + * This function removes processed DMA descriptors from the "active" list. Pass + * in a non-NULL list head to get the descriptors moved to your list. Pass NULL + * to get the descriptors moved to the channel's "done" list. Descriptors on + * the "done" list can be retrieved with mxs_dma_get_finished(). + * + * This function marks the DMA channel as "not busy" if no unprocessed + * descriptors remain on the "active" list. + */ +int mxs_dma_finish(int channel, struct list_head *head) +{ + int sem; + struct mxs_dma_chan *pchan; + struct list_head *p, *q; + struct mxs_dma_desc *pdesc; + int ret; + + ret = mxs_dma_validate_chan(channel); + if (ret) + return ret; + + pchan = mxs_dma_channels + channel; + + sem = mxs_dma_read_semaphore(channel); + if (sem < 0) + return sem; + + if (sem == pchan->active_num) + return 0; + + list_for_each_safe(p, q, &pchan->active) { + if ((pchan->active_num) <= sem) + break; + + pdesc = list_entry(p, struct mxs_dma_desc, node); + pdesc->flags &= ~MXS_DMA_DESC_READY; + + if (head) + list_move_tail(p, head); + else + list_move_tail(p, &pchan->done); + + if (pdesc->flags & MXS_DMA_DESC_LAST) + pchan->active_num--; + } + + if (sem == 0) + pchan->flags &= ~MXS_DMA_FLAGS_BUSY; + + return 0; +} + +/* + * Wait for DMA channel to complete + */ +int mxs_dma_wait_complete(uint32_t timeout, unsigned int chan) +{ + struct mx28_apbh_regs *apbh_regs = + (struct mx28_apbh_regs *)MXS_APBH_BASE; + int ret; + + ret = mxs_dma_validate_chan(chan); + if (ret) + return ret; + + if (mx28_wait_mask_set(&apbh_regs->hw_apbh_ctrl1_reg, + 1 << chan, timeout)) { + ret = -ETIMEDOUT; + mxs_dma_reset(chan); + } + + return 0; +} + +/* + * Execute the DMA channel + */ +int mxs_dma_go(int chan) +{ + uint32_t timeout = 10000; + int ret; + + LIST_HEAD(tmp_desc_list); + + mxs_dma_enable_irq(chan, 1); + mxs_dma_enable(chan); + + /* Wait for DMA to finish. */ + ret = mxs_dma_wait_complete(timeout, chan); + + /* Clear out the descriptors we just ran. */ + mxs_dma_finish(chan, &tmp_desc_list); + + /* Shut the DMA channel down. */ + mxs_dma_ack_irq(chan); + mxs_dma_reset(chan); + mxs_dma_enable_irq(chan, 0); + mxs_dma_disable(chan); + + return ret; +} + +/* + * Initialize the DMA hardware + */ +int mxs_dma_init(void) +{ + struct mx28_apbh_regs *apbh_regs = + (struct mx28_apbh_regs *)MXS_APBH_BASE; + struct mxs_dma_chan *pchan; + int ret, channel; + + mx28_reset_block(&apbh_regs->hw_apbh_ctrl0_reg); + +#ifdef CONFIG_APBH_DMA_BURST8 + writel(APBH_CTRL0_AHB_BURST8_EN, + &apbh_regs->hw_apbh_ctrl0_set); +#else + writel(APBH_CTRL0_AHB_BURST8_EN, + &apbh_regs->hw_apbh_ctrl0_clr); +#endif + +#ifdef CONFIG_APBH_DMA_BURST + writel(APBH_CTRL0_APB_BURST_EN, + &apbh_regs->hw_apbh_ctrl0_set); +#else + writel(APBH_CTRL0_APB_BURST_EN, + &apbh_regs->hw_apbh_ctrl0_clr); +#endif + + for (channel = 0; channel < MXS_MAX_DMA_CHANNELS; channel++) { + pchan = mxs_dma_channels + channel; + pchan->flags = MXS_DMA_FLAGS_VALID; + + ret = mxs_dma_request(channel); + + if (ret) { + printf("MXS DMA: Can't acquire DMA channel %i\n", + channel); + + goto err; + } + + mxs_dma_reset(channel); + mxs_dma_ack_irq(channel); + } + + return 0; + +err: + while (--channel >= 0) + mxs_dma_release(channel); + return ret; +} diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index f505813d0..e1142d14b 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -30,6 +30,7 @@ COBJS-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o COBJS-$(CONFIG_MARVELL_GPIO) += mvgpio.o COBJS-$(CONFIG_MARVELL_MFP) += mvmfp.o COBJS-$(CONFIG_MXC_GPIO) += mxc_gpio.o +COBJS-$(CONFIG_MXS_GPIO) += mxs_gpio.o COBJS-$(CONFIG_PCA953X) += pca953x.o COBJS-$(CONFIG_PCA9698) += pca9698.o COBJS-$(CONFIG_S5P) += s5p_gpio.o diff --git a/drivers/gpio/mxs_gpio.c b/drivers/gpio/mxs_gpio.c new file mode 100644 index 000000000..b7e959128 --- /dev/null +++ b/drivers/gpio/mxs_gpio.c @@ -0,0 +1,136 @@ +/* + * Freescale i.MX28 GPIO control code + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <netdev.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/iomux.h> +#include <asm/arch/imx-regs.h> + +#if defined(CONFIG_MX23) +#define PINCTRL_BANKS 3 +#define PINCTRL_DOUT(n) (0x0500 + ((n) * 0x10)) +#define PINCTRL_DIN(n) (0x0600 + ((n) * 0x10)) +#define PINCTRL_DOE(n) (0x0700 + ((n) * 0x10)) +#define PINCTRL_PIN2IRQ(n) (0x0800 + ((n) * 0x10)) +#define PINCTRL_IRQEN(n) (0x0900 + ((n) * 0x10)) +#define PINCTRL_IRQSTAT(n) (0x0c00 + ((n) * 0x10)) +#elif defined(CONFIG_MX28) +#define PINCTRL_BANKS 5 +#define PINCTRL_DOUT(n) (0x0700 + ((n) * 0x10)) +#define PINCTRL_DIN(n) (0x0900 + ((n) * 0x10)) +#define PINCTRL_DOE(n) (0x0b00 + ((n) * 0x10)) +#define PINCTRL_PIN2IRQ(n) (0x1000 + ((n) * 0x10)) +#define PINCTRL_IRQEN(n) (0x1100 + ((n) * 0x10)) +#define PINCTRL_IRQSTAT(n) (0x1400 + ((n) * 0x10)) +#else +#error "Please select CONFIG_MX23 or CONFIG_MX28" +#endif + +#define GPIO_INT_FALL_EDGE 0x0 +#define GPIO_INT_LOW_LEV 0x1 +#define GPIO_INT_RISE_EDGE 0x2 +#define GPIO_INT_HIGH_LEV 0x3 +#define GPIO_INT_LEV_MASK (1 << 0) +#define GPIO_INT_POL_MASK (1 << 1) + +void mxs_gpio_init(void) +{ + int i; + + for (i = 0; i < PINCTRL_BANKS; i++) { + writel(0, MXS_PINCTRL_BASE + PINCTRL_PIN2IRQ(i)); + writel(0, MXS_PINCTRL_BASE + PINCTRL_IRQEN(i)); + /* Use SCT address here to clear the IRQSTAT bits */ + writel(0xffffffff, MXS_PINCTRL_BASE + PINCTRL_IRQSTAT(i) + 8); + } +} + +int gpio_get_value(int gp) +{ + uint32_t bank = PAD_BANK(gp); + uint32_t offset = PINCTRL_DIN(bank); + struct mx28_register *reg = + (struct mx28_register *)(MXS_PINCTRL_BASE + offset); + + return (readl(®->reg) >> PAD_PIN(gp)) & 1; +} + +void gpio_set_value(int gp, int value) +{ + uint32_t bank = PAD_BANK(gp); + uint32_t offset = PINCTRL_DOUT(bank); + struct mx28_register *reg = + (struct mx28_register *)(MXS_PINCTRL_BASE + offset); + + if (value) + writel(1 << PAD_PIN(gp), ®->reg_set); + else + writel(1 << PAD_PIN(gp), ®->reg_clr); +} + +int gpio_direction_input(int gp) +{ + uint32_t bank = PAD_BANK(gp); + uint32_t offset = PINCTRL_DOE(bank); + struct mx28_register *reg = + (struct mx28_register *)(MXS_PINCTRL_BASE + offset); + + writel(1 << PAD_PIN(gp), ®->reg_clr); + + return 0; +} + +int gpio_direction_output(int gp, int value) +{ + uint32_t bank = PAD_BANK(gp); + uint32_t offset = PINCTRL_DOE(bank); + struct mx28_register *reg = + (struct mx28_register *)(MXS_PINCTRL_BASE + offset); + + writel(1 << PAD_PIN(gp), ®->reg_set); + + gpio_set_value(gp, value); + + return 0; +} + +int gpio_request(int gp, const char *label) +{ + if (PAD_BANK(gp) > PINCTRL_BANKS) + return -EINVAL; + + return 0; +} + +void gpio_free(int gp) +{ +} + +void gpio_toggle_value(int gp) +{ + gpio_set_value(gp, !gpio_get_value(gp)); +} diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index a48047a4f..2fb521e88 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -31,6 +31,7 @@ COBJS-$(CONFIG_FSL_I2C) += fsl_i2c.o COBJS-$(CONFIG_I2C_MVTWSI) += mvtwsi.o COBJS-$(CONFIG_I2C_MV) += mv_i2c.o COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o +COBJS-$(CONFIG_I2C_MXS) += mxs_i2c.o COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o diff --git a/drivers/i2c/mxs_i2c.c b/drivers/i2c/mxs_i2c.c new file mode 100644 index 000000000..c8fea3235 --- /dev/null +++ b/drivers/i2c/mxs_i2c.c @@ -0,0 +1,246 @@ +/* + * Freescale i.MX28 I2C Driver + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Partly based on Linux kernel i2c-mxs.c driver: + * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K. + * + * Which was based on a (non-working) driver which was: + * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <common.h> +#include <malloc.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> + +#define MXS_I2C_MAX_TIMEOUT 1000000 + +void mxs_i2c_reset(void) +{ + struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE; + int ret; + + ret = mx28_reset_block(&i2c_regs->hw_i2c_ctrl0_reg); + if (ret) { + debug("MXS I2C: Block reset timeout\n"); + return; + } + + writel(I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ | I2C_CTRL1_NO_SLAVE_ACK_IRQ | + I2C_CTRL1_EARLY_TERM_IRQ | I2C_CTRL1_MASTER_LOSS_IRQ | + I2C_CTRL1_SLAVE_STOP_IRQ | I2C_CTRL1_SLAVE_IRQ, + &i2c_regs->hw_i2c_ctrl1_clr); + + writel(I2C_QUEUECTRL_PIO_QUEUE_MODE, &i2c_regs->hw_i2c_queuectrl_set); +} + +void mxs_i2c_setup_read(uint8_t chip, int len) +{ + struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE; + + writel(I2C_QUEUECMD_RETAIN_CLOCK | I2C_QUEUECMD_PRE_SEND_START | + I2C_QUEUECMD_MASTER_MODE | I2C_QUEUECMD_DIRECTION | + (1 << I2C_QUEUECMD_XFER_COUNT_OFFSET), + &i2c_regs->hw_i2c_queuecmd); + + writel((chip << 1) | 1, &i2c_regs->hw_i2c_data); + + writel(I2C_QUEUECMD_SEND_NAK_ON_LAST | I2C_QUEUECMD_MASTER_MODE | + (len << I2C_QUEUECMD_XFER_COUNT_OFFSET) | + I2C_QUEUECMD_POST_SEND_STOP, &i2c_regs->hw_i2c_queuecmd); + + writel(I2C_QUEUECTRL_QUEUE_RUN, &i2c_regs->hw_i2c_queuectrl_set); +} + +void mxs_i2c_write(uchar chip, uint addr, int alen, + uchar *buf, int blen, int stop) +{ + struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE; + uint32_t data; + int i, remain, off; + + if ((alen > 4) || (alen == 0)) { + debug("MXS I2C: Invalid address length\n"); + return; + } + + if (stop) + stop = I2C_QUEUECMD_POST_SEND_STOP; + + writel(I2C_QUEUECMD_PRE_SEND_START | + I2C_QUEUECMD_MASTER_MODE | I2C_QUEUECMD_DIRECTION | + ((blen + alen + 1) << I2C_QUEUECMD_XFER_COUNT_OFFSET) | stop, + &i2c_regs->hw_i2c_queuecmd); + + data = (chip << 1) << 24; + + for (i = 0; i < alen; i++) { + data >>= 8; + data |= ((char *)&addr)[i] << 24; + if ((i & 3) == 2) + writel(data, &i2c_regs->hw_i2c_data); + } + + off = i; + for (; i < off + blen; i++) { + data >>= 8; + data |= buf[i - off] << 24; + if ((i & 3) == 2) + writel(data, &i2c_regs->hw_i2c_data); + } + + remain = 24 - ((i & 3) * 8); + if (remain) + writel(data >> remain, &i2c_regs->hw_i2c_data); + + writel(I2C_QUEUECTRL_QUEUE_RUN, &i2c_regs->hw_i2c_queuectrl_set); +} + +int mxs_i2c_wait_for_ack(void) +{ + struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE; + uint32_t tmp; + int timeout = MXS_I2C_MAX_TIMEOUT; + + for (;;) { + tmp = readl(&i2c_regs->hw_i2c_ctrl1); + if (tmp & I2C_CTRL1_NO_SLAVE_ACK_IRQ) { + debug("MXS I2C: No slave ACK\n"); + goto err; + } + + if (tmp & ( + I2C_CTRL1_EARLY_TERM_IRQ | I2C_CTRL1_MASTER_LOSS_IRQ | + I2C_CTRL1_SLAVE_STOP_IRQ | I2C_CTRL1_SLAVE_IRQ)) { + debug("MXS I2C: Error (CTRL1 = %08x)\n", tmp); + goto err; + } + + if (tmp & I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ) + break; + + if (!timeout--) { + debug("MXS I2C: Operation timed out\n"); + goto err; + } + + udelay(1); + } + + return 0; + +err: + mxs_i2c_reset(); + return 1; +} + +int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) +{ + struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE; + uint32_t tmp = 0; + int ret; + int i; + + mxs_i2c_write(chip, addr, alen, NULL, 0, 0); + ret = mxs_i2c_wait_for_ack(); + if (ret) { + debug("MXS I2C: Failed writing address\n"); + return ret; + } + + mxs_i2c_setup_read(chip, len); + ret = mxs_i2c_wait_for_ack(); + if (ret) { + debug("MXS I2C: Failed reading address\n"); + return ret; + } + + for (i = 0; i < len; i++) { + if (!(i & 3)) { + while (readl(&i2c_regs->hw_i2c_queuestat) & + I2C_QUEUESTAT_RD_QUEUE_EMPTY) + ; + tmp = readl(&i2c_regs->hw_i2c_queuedata); + } + buffer[i] = tmp & 0xff; + tmp >>= 8; + } + + return 0; +} + +int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) +{ + int ret; + mxs_i2c_write(chip, addr, alen, buffer, len, 1); + ret = mxs_i2c_wait_for_ack(); + if (ret) + debug("MXS I2C: Failed writing address\n"); + + return ret; +} + +int i2c_probe(uchar chip) +{ + int ret; + mxs_i2c_write(chip, 0, 1, NULL, 0, 1); + ret = mxs_i2c_wait_for_ack(); + mxs_i2c_reset(); + return ret; +} + +void i2c_init(int speed, int slaveadd) +{ + struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE; + + mxs_i2c_reset(); + + switch (speed) { + case 100000: + writel((0x0078 << I2C_TIMING0_HIGH_COUNT_OFFSET) | + (0x0030 << I2C_TIMING0_RCV_COUNT_OFFSET), + &i2c_regs->hw_i2c_timing0); + writel((0x0080 << I2C_TIMING1_LOW_COUNT_OFFSET) | + (0x0030 << I2C_TIMING1_XMIT_COUNT_OFFSET), + &i2c_regs->hw_i2c_timing1); + break; + case 400000: + writel((0x000f << I2C_TIMING0_HIGH_COUNT_OFFSET) | + (0x0007 << I2C_TIMING0_RCV_COUNT_OFFSET), + &i2c_regs->hw_i2c_timing0); + writel((0x001f << I2C_TIMING1_LOW_COUNT_OFFSET) | + (0x000f << I2C_TIMING1_XMIT_COUNT_OFFSET), + &i2c_regs->hw_i2c_timing1); + break; + default: + printf("MXS I2C: Invalid speed selected (%d Hz)\n", speed); + return; + } + + writel((0x0015 << I2C_TIMING2_BUS_FREE_OFFSET) | + (0x000d << I2C_TIMING2_LEADIN_COUNT_OFFSET), + &i2c_regs->hw_i2c_timing2); + + return; +} diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 9f9db7516..506f1d6ef 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -36,6 +36,7 @@ COBJS-$(CONFIG_MMC_SPI) += mmc_spi.o COBJS-$(CONFIG_ARM_PL180_MMCI) += arm_pl180_mmci.o COBJS-$(CONFIG_MV_SDHCI) += mv_sdhci.o COBJS-$(CONFIG_MXC_MMC) += mxcmmc.o +COBJS-$(CONFIG_MXS_MMC) += mxsmmc.o COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o COBJS-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c new file mode 100644 index 000000000..2a9949eb9 --- /dev/null +++ b/drivers/mmc/mxsmmc.c @@ -0,0 +1,351 @@ +/* + * Freescale i.MX28 SSP MMC driver + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. + * Terry Lv + * + * Copyright 2007, Freescale Semiconductor, Inc + * Andy Fleming + * + * Based vaguely on the pxa mmc code: + * (C) Copyright 2003 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <malloc.h> +#include <mmc.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> + +struct mxsmmc_priv { + int id; + struct mx28_ssp_regs *regs; + uint32_t clkseq_bypass; + uint32_t *clkctrl_ssp; + uint32_t buswidth; + int (*mmc_is_wp)(int); +}; + +#define MXSMMC_MAX_TIMEOUT 10000 + +/* + * Sends a command out on the bus. Takes the mmc pointer, + * a command pointer, and an optional data pointer. + */ +static int +mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) +{ + struct mxsmmc_priv *priv = (struct mxsmmc_priv *)mmc->priv; + struct mx28_ssp_regs *ssp_regs = priv->regs; + uint32_t reg; + int timeout; + uint32_t data_count; + uint32_t *data_ptr; + uint32_t ctrl0; + + debug("MMC%d: CMD%d\n", mmc->block_dev.dev, cmd->cmdidx); + + /* Check bus busy */ + timeout = MXSMMC_MAX_TIMEOUT; + while (--timeout) { + udelay(1000); + reg = readl(&ssp_regs->hw_ssp_status); + if (!(reg & + (SSP_STATUS_BUSY | SSP_STATUS_DATA_BUSY | + SSP_STATUS_CMD_BUSY))) { + break; + } + } + + if (!timeout) { + printf("MMC%d: Bus busy timeout!\n", mmc->block_dev.dev); + return TIMEOUT; + } + + /* See if card is present */ + if (readl(&ssp_regs->hw_ssp_status) & SSP_STATUS_CARD_DETECT) { + printf("MMC%d: No card detected!\n", mmc->block_dev.dev); + return NO_CARD_ERR; + } + + /* Start building CTRL0 contents */ + ctrl0 = priv->buswidth; + + /* Set up command */ + if (!(cmd->resp_type & MMC_RSP_CRC)) + ctrl0 |= SSP_CTRL0_IGNORE_CRC; + if (cmd->resp_type & MMC_RSP_PRESENT) /* Need to get response */ + ctrl0 |= SSP_CTRL0_GET_RESP; + if (cmd->resp_type & MMC_RSP_136) /* It's a 136 bits response */ + ctrl0 |= SSP_CTRL0_LONG_RESP; + + /* Command index */ + reg = readl(&ssp_regs->hw_ssp_cmd0); + reg &= ~(SSP_CMD0_CMD_MASK | SSP_CMD0_APPEND_8CYC); + reg |= cmd->cmdidx << SSP_CMD0_CMD_OFFSET; + if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION) + reg |= SSP_CMD0_APPEND_8CYC; + writel(reg, &ssp_regs->hw_ssp_cmd0); + + /* Command argument */ + writel(cmd->cmdarg, &ssp_regs->hw_ssp_cmd1); + + /* Set up data */ + if (data) { + /* READ or WRITE */ + if (data->flags & MMC_DATA_READ) { + ctrl0 |= SSP_CTRL0_READ; + } else if (priv->mmc_is_wp(mmc->block_dev.dev)) { + printf("MMC%d: Can not write a locked card!\n", + mmc->block_dev.dev); + return UNUSABLE_ERR; + } + + ctrl0 |= SSP_CTRL0_DATA_XFER; + reg = ((data->blocks - 1) << + SSP_BLOCK_SIZE_BLOCK_COUNT_OFFSET) | + ((ffs(data->blocksize) - 1) << + SSP_BLOCK_SIZE_BLOCK_SIZE_OFFSET); + writel(reg, &ssp_regs->hw_ssp_block_size); + + reg = data->blocksize * data->blocks; + writel(reg, &ssp_regs->hw_ssp_xfer_size); + } + + /* Kick off the command */ + ctrl0 |= SSP_CTRL0_WAIT_FOR_IRQ | SSP_CTRL0_ENABLE | SSP_CTRL0_RUN; + writel(ctrl0, &ssp_regs->hw_ssp_ctrl0); + + /* Wait for the command to complete */ + timeout = MXSMMC_MAX_TIMEOUT; + while (--timeout) { + udelay(1000); + reg = readl(&ssp_regs->hw_ssp_status); + if (!(reg & SSP_STATUS_CMD_BUSY)) + break; + } + + if (!timeout) { + printf("MMC%d: Command %d busy\n", + mmc->block_dev.dev, cmd->cmdidx); + return TIMEOUT; + } + + /* Check command timeout */ + if (reg & SSP_STATUS_RESP_TIMEOUT) { + printf("MMC%d: Command %d timeout (status 0x%08x)\n", + mmc->block_dev.dev, cmd->cmdidx, reg); + return TIMEOUT; + } + + /* Check command errors */ + if (reg & (SSP_STATUS_RESP_CRC_ERR | SSP_STATUS_RESP_ERR)) { + printf("MMC%d: Command %d error (status 0x%08x)!\n", + mmc->block_dev.dev, cmd->cmdidx, reg); + return COMM_ERR; + } + + /* Copy response to response buffer */ + if (cmd->resp_type & MMC_RSP_136) { + cmd->response[3] = readl(&ssp_regs->hw_ssp_sdresp0); + cmd->response[2] = readl(&ssp_regs->hw_ssp_sdresp1); + cmd->response[1] = readl(&ssp_regs->hw_ssp_sdresp2); + cmd->response[0] = readl(&ssp_regs->hw_ssp_sdresp3); + } else + cmd->response[0] = readl(&ssp_regs->hw_ssp_sdresp0); + + /* Return if no data to process */ + if (!data) + return 0; + + /* Process the data */ + data_count = data->blocksize * data->blocks; + timeout = MXSMMC_MAX_TIMEOUT; + if (data->flags & MMC_DATA_READ) { + data_ptr = (uint32_t *)data->dest; + while (data_count && --timeout) { + reg = readl(&ssp_regs->hw_ssp_status); + if (!(reg & SSP_STATUS_FIFO_EMPTY)) { + *data_ptr++ = readl(&ssp_regs->hw_ssp_data); + data_count -= 4; + timeout = MXSMMC_MAX_TIMEOUT; + } else + udelay(1000); + } + } else { + data_ptr = (uint32_t *)data->src; + timeout *= 100; + while (data_count && --timeout) { + reg = readl(&ssp_regs->hw_ssp_status); + if (!(reg & SSP_STATUS_FIFO_FULL)) { + writel(*data_ptr++, &ssp_regs->hw_ssp_data); + data_count -= 4; + timeout = MXSMMC_MAX_TIMEOUT; + } else + udelay(1000); + } + } + + if (!timeout) { + printf("MMC%d: Data timeout with command %d (status 0x%08x)!\n", + mmc->block_dev.dev, cmd->cmdidx, reg); + return COMM_ERR; + } + + /* Check data errors */ + reg = readl(&ssp_regs->hw_ssp_status); + if (reg & + (SSP_STATUS_TIMEOUT | SSP_STATUS_DATA_CRC_ERR | + SSP_STATUS_FIFO_OVRFLW | SSP_STATUS_FIFO_UNDRFLW)) { + printf("MMC%d: Data error with command %d (status 0x%08x)!\n", + mmc->block_dev.dev, cmd->cmdidx, reg); + return COMM_ERR; + } + + return 0; +} + +static void mxsmmc_set_ios(struct mmc *mmc) +{ + struct mxsmmc_priv *priv = (struct mxsmmc_priv *)mmc->priv; + struct mx28_ssp_regs *ssp_regs = priv->regs; + + /* Set the clock speed */ + if (mmc->clock) + mx28_set_ssp_busclock(priv->id, mmc->clock / 1000); + + switch (mmc->bus_width) { + case 1: + priv->buswidth = SSP_CTRL0_BUS_WIDTH_ONE_BIT; + break; + case 4: + priv->buswidth = SSP_CTRL0_BUS_WIDTH_FOUR_BIT; + break; + case 8: + priv->buswidth = SSP_CTRL0_BUS_WIDTH_EIGHT_BIT; + break; + } + + /* Set the bus width */ + clrsetbits_le32(&ssp_regs->hw_ssp_ctrl0, + SSP_CTRL0_BUS_WIDTH_MASK, priv->buswidth); + + debug("MMC%d: Set %d bits bus width\n", + mmc->block_dev.dev, mmc->bus_width); +} + +static int mxsmmc_init(struct mmc *mmc) +{ + struct mxsmmc_priv *priv = (struct mxsmmc_priv *)mmc->priv; + struct mx28_ssp_regs *ssp_regs = priv->regs; + + /* Reset SSP */ + mx28_reset_block(&ssp_regs->hw_ssp_ctrl0_reg); + + /* 8 bits word length in MMC mode */ + clrsetbits_le32(&ssp_regs->hw_ssp_ctrl1, + SSP_CTRL1_SSP_MODE_MASK | SSP_CTRL1_WORD_LENGTH_MASK, + SSP_CTRL1_SSP_MODE_SD_MMC | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS); + + /* Set initial bit clock 400 KHz */ + mx28_set_ssp_busclock(priv->id, 400); + + /* Send initial 74 clock cycles (185 us @ 400 KHz)*/ + writel(SSP_CMD0_CONT_CLKING_EN, &ssp_regs->hw_ssp_cmd0_set); + udelay(200); + writel(SSP_CMD0_CONT_CLKING_EN, &ssp_regs->hw_ssp_cmd0_clr); + + return 0; +} + +int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int)) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mmc *mmc = NULL; + struct mxsmmc_priv *priv = NULL; + + mmc = malloc(sizeof(struct mmc)); + if (!mmc) + return -ENOMEM; + + priv = malloc(sizeof(struct mxsmmc_priv)); + if (!priv) { + free(mmc); + return -ENOMEM; + } + + priv->mmc_is_wp = wp; + priv->id = id; + switch (id) { + case 0: + priv->regs = (struct mx28_ssp_regs *)MXS_SSP0_BASE; + priv->clkseq_bypass = CLKCTRL_CLKSEQ_BYPASS_SSP0; + priv->clkctrl_ssp = &clkctrl_regs->hw_clkctrl_ssp0; + break; + case 1: + priv->regs = (struct mx28_ssp_regs *)MXS_SSP1_BASE; + priv->clkseq_bypass = CLKCTRL_CLKSEQ_BYPASS_SSP1; + priv->clkctrl_ssp = &clkctrl_regs->hw_clkctrl_ssp1; + break; + case 2: + priv->regs = (struct mx28_ssp_regs *)MXS_SSP2_BASE; + priv->clkseq_bypass = CLKCTRL_CLKSEQ_BYPASS_SSP2; + priv->clkctrl_ssp = &clkctrl_regs->hw_clkctrl_ssp2; + break; + case 3: + priv->regs = (struct mx28_ssp_regs *)MXS_SSP3_BASE; + priv->clkseq_bypass = CLKCTRL_CLKSEQ_BYPASS_SSP3; + priv->clkctrl_ssp = &clkctrl_regs->hw_clkctrl_ssp3; + break; + } + + sprintf(mmc->name, "MXS MMC"); + mmc->send_cmd = mxsmmc_send_cmd; + mmc->set_ios = mxsmmc_set_ios; + mmc->init = mxsmmc_init; + mmc->priv = priv; + + mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; + + mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT | + MMC_MODE_HS_52MHz | MMC_MODE_HS; + + /* + * SSPCLK = 480 * 18 / 29 / 1 = 297.731 MHz + * SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)), + * CLOCK_DIVIDE has to be an even value from 2 to 254, and + * CLOCK_RATE could be any integer from 0 to 255. + */ + mmc->f_min = 400000; + mmc->f_max = mxc_get_clock(MXC_SSP0_CLK + id) * 1000 / 2; + mmc->b_max = 0; + + mmc_register(mmc); + return 0; +} diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index ebda980fb..c38b9e603 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -36,8 +36,9 @@ /* If we fail after 1 second wait, something is really bad */ #define MAX_RETRY_MS 1000 -static int mmc_read_data(hsmmc_t *mmc_base, char *buf, unsigned int size); -static int mmc_write_data(hsmmc_t *mmc_base, const char *buf, unsigned int siz); +static int mmc_read_data(struct hsmmc *mmc_base, char *buf, unsigned int size); +static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, + unsigned int siz); static struct mmc hsmmc_dev[2]; #if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER) @@ -97,7 +98,7 @@ unsigned char mmc_board_init(struct mmc *mmc) return 0; } -void mmc_init_stream(hsmmc_t *mmc_base) +void mmc_init_stream(struct hsmmc *mmc_base) { ulong start; @@ -128,7 +129,7 @@ void mmc_init_stream(hsmmc_t *mmc_base) static int mmc_init_setup(struct mmc *mmc) { - hsmmc_t *mmc_base = (hsmmc_t *)mmc->priv; + struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv; unsigned int reg_val; unsigned int dsor; ulong start; @@ -192,7 +193,7 @@ static int mmc_init_setup(struct mmc *mmc) static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) { - hsmmc_t *mmc_base = (hsmmc_t *)mmc->priv; + struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv; unsigned int flags, mmc_stat; ulong start; @@ -305,7 +306,7 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, return 0; } -static int mmc_read_data(hsmmc_t *mmc_base, char *buf, unsigned int size) +static int mmc_read_data(struct hsmmc *mmc_base, char *buf, unsigned int size) { unsigned int *output_buf = (unsigned int *)buf; unsigned int mmc_stat; @@ -356,7 +357,8 @@ static int mmc_read_data(hsmmc_t *mmc_base, char *buf, unsigned int size) return 0; } -static int mmc_write_data(hsmmc_t *mmc_base, const char *buf, unsigned int size) +static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, + unsigned int size) { unsigned int *input_buf = (unsigned int *)buf; unsigned int mmc_stat; @@ -409,7 +411,7 @@ static int mmc_write_data(hsmmc_t *mmc_base, const char *buf, unsigned int size) static void mmc_set_ios(struct mmc *mmc) { - hsmmc_t *mmc_base = (hsmmc_t *)mmc->priv; + struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv; unsigned int dsor = 0; ulong start; @@ -473,20 +475,20 @@ int omap_mmc_init(int dev_index) switch (dev_index) { case 0: - mmc->priv = (hsmmc_t *)OMAP_HSMMC1_BASE; + mmc->priv = (struct hsmmc *)OMAP_HSMMC1_BASE; break; #ifdef OMAP_HSMMC2_BASE case 1: - mmc->priv = (hsmmc_t *)OMAP_HSMMC2_BASE; + mmc->priv = (struct hsmmc *)OMAP_HSMMC2_BASE; break; #endif #ifdef OMAP_HSMMC3_BASE case 2: - mmc->priv = (hsmmc_t *)OMAP_HSMMC3_BASE; + mmc->priv = (struct hsmmc *)OMAP_HSMMC3_BASE; break; #endif default: - mmc->priv = (hsmmc_t *)OMAP_HSMMC1_BASE; + mmc->priv = (struct hsmmc *)OMAP_HSMMC1_BASE; return 1; } mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 28bd3507d..36ee45430 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -54,6 +54,7 @@ COBJS-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o COBJS-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o COBJS-$(CONFIG_NAND_MPC5121_NFC) += mpc5121_nfc.o COBJS-$(CONFIG_NAND_MXC) += mxc_nand.o +COBJS-$(CONFIG_NAND_MXS) += mxs_nand.o COBJS-$(CONFIG_NAND_NDFC) += ndfc.o COBJS-$(CONFIG_NAND_NOMADIK) += nomadik.o COBJS-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c new file mode 100644 index 000000000..ce2a32687 --- /dev/null +++ b/drivers/mtd/nand/mxs_nand.c @@ -0,0 +1,1118 @@ +/* + * Freescale i.MX28 NAND flash driver + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * Freescale GPMI NFC NAND Flash Driver + * + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * Copyright (C) 2008 Embedded Alley Solutions, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/types.h> +#include <common.h> +#include <malloc.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/dma.h> + +#define MXS_NAND_DMA_DESCRIPTOR_COUNT 4 + +#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE 512 +#define MXS_NAND_METADATA_SIZE 10 + +#define MXS_NAND_COMMAND_BUFFER_SIZE 32 + +#define MXS_NAND_BCH_TIMEOUT 10000 + +struct mxs_nand_info { + int cur_chip; + + uint32_t cmd_queue_len; + + uint8_t *cmd_buf; + uint8_t *data_buf; + uint8_t *oob_buf; + + uint8_t marking_block_bad; + uint8_t raw_oob_mode; + + /* Functions with altered behaviour */ + int (*hooked_read_oob)(struct mtd_info *mtd, + loff_t from, struct mtd_oob_ops *ops); + int (*hooked_write_oob)(struct mtd_info *mtd, + loff_t to, struct mtd_oob_ops *ops); + int (*hooked_block_markbad)(struct mtd_info *mtd, + loff_t ofs); + + /* DMA descriptors */ + struct mxs_dma_desc **desc; + uint32_t desc_index; +}; + +struct nand_ecclayout fake_ecc_layout; + +static struct mxs_dma_desc *mxs_nand_get_dma_desc(struct mxs_nand_info *info) +{ + struct mxs_dma_desc *desc; + + if (info->desc_index >= MXS_NAND_DMA_DESCRIPTOR_COUNT) { + printf("MXS NAND: Too many DMA descriptors requested\n"); + return NULL; + } + + desc = info->desc[info->desc_index]; + info->desc_index++; + + return desc; +} + +static void mxs_nand_return_dma_descs(struct mxs_nand_info *info) +{ + int i; + struct mxs_dma_desc *desc; + + for (i = 0; i < info->desc_index; i++) { + desc = info->desc[i]; + memset(desc, 0, sizeof(struct mxs_dma_desc)); + desc->address = (dma_addr_t)desc; + } + + info->desc_index = 0; +} + +static uint32_t mxs_nand_ecc_chunk_cnt(uint32_t page_data_size) +{ + return page_data_size / MXS_NAND_CHUNK_DATA_CHUNK_SIZE; +} + +static uint32_t mxs_nand_ecc_size_in_bits(uint32_t ecc_strength) +{ + return ecc_strength * 13; +} + +static uint32_t mxs_nand_aux_status_offset(void) +{ + return (MXS_NAND_METADATA_SIZE + 0x3) & ~0x3; +} + +static inline uint32_t mxs_nand_get_ecc_strength(uint32_t page_data_size, + uint32_t page_oob_size) +{ + if (page_data_size == 2048) + return 8; + + if (page_data_size == 4096) { + if (page_oob_size == 128) + return 8; + + if (page_oob_size == 218) + return 16; + } + + return 0; +} + +static inline uint32_t mxs_nand_get_mark_offset(uint32_t page_data_size, + uint32_t ecc_strength) +{ + uint32_t chunk_data_size_in_bits; + uint32_t chunk_ecc_size_in_bits; + uint32_t chunk_total_size_in_bits; + uint32_t block_mark_chunk_number; + uint32_t block_mark_chunk_bit_offset; + uint32_t block_mark_bit_offset; + + chunk_data_size_in_bits = MXS_NAND_CHUNK_DATA_CHUNK_SIZE * 8; + chunk_ecc_size_in_bits = mxs_nand_ecc_size_in_bits(ecc_strength); + + chunk_total_size_in_bits = + chunk_data_size_in_bits + chunk_ecc_size_in_bits; + + /* Compute the bit offset of the block mark within the physical page. */ + block_mark_bit_offset = page_data_size * 8; + + /* Subtract the metadata bits. */ + block_mark_bit_offset -= MXS_NAND_METADATA_SIZE * 8; + + /* + * Compute the chunk number (starting at zero) in which the block mark + * appears. + */ + block_mark_chunk_number = + block_mark_bit_offset / chunk_total_size_in_bits; + + /* + * Compute the bit offset of the block mark within its chunk, and + * validate it. + */ + block_mark_chunk_bit_offset = block_mark_bit_offset - + (block_mark_chunk_number * chunk_total_size_in_bits); + + if (block_mark_chunk_bit_offset > chunk_data_size_in_bits) + return 1; + + /* + * Now that we know the chunk number in which the block mark appears, + * we can subtract all the ECC bits that appear before it. + */ + block_mark_bit_offset -= + block_mark_chunk_number * chunk_ecc_size_in_bits; + + return block_mark_bit_offset; +} + +static uint32_t mxs_nand_mark_byte_offset(struct mtd_info *mtd) +{ + uint32_t ecc_strength; + ecc_strength = mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize); + return mxs_nand_get_mark_offset(mtd->writesize, ecc_strength) >> 3; +} + +static uint32_t mxs_nand_mark_bit_offset(struct mtd_info *mtd) +{ + uint32_t ecc_strength; + ecc_strength = mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize); + return mxs_nand_get_mark_offset(mtd->writesize, ecc_strength) & 0x7; +} + +/* + * Wait for BCH complete IRQ and clear the IRQ + */ +static int mxs_nand_wait_for_bch_complete(void) +{ + struct mx28_bch_regs *bch_regs = (struct mx28_bch_regs *)MXS_BCH_BASE; + int timeout = MXS_NAND_BCH_TIMEOUT; + int ret; + + ret = mx28_wait_mask_set(&bch_regs->hw_bch_ctrl_reg, + BCH_CTRL_COMPLETE_IRQ, timeout); + + writel(BCH_CTRL_COMPLETE_IRQ, &bch_regs->hw_bch_ctrl_clr); + + return ret; +} + +/* + * This is the function that we install in the cmd_ctrl function pointer of the + * owning struct nand_chip. The only functions in the reference implementation + * that use these functions pointers are cmdfunc and select_chip. + * + * In this driver, we implement our own select_chip, so this function will only + * be called by the reference implementation's cmdfunc. For this reason, we can + * ignore the chip enable bit and concentrate only on sending bytes to the NAND + * Flash. + */ +static void mxs_nand_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl) +{ + struct nand_chip *nand = mtd->priv; + struct mxs_nand_info *nand_info = nand->priv; + struct mxs_dma_desc *d; + uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip; + int ret; + + /* + * If this condition is true, something is _VERY_ wrong in MTD + * subsystem! + */ + if (nand_info->cmd_queue_len == MXS_NAND_COMMAND_BUFFER_SIZE) { + printf("MXS NAND: Command queue too long\n"); + return; + } + + /* + * Every operation begins with a command byte and a series of zero or + * more address bytes. These are distinguished by either the Address + * Latch Enable (ALE) or Command Latch Enable (CLE) signals being + * asserted. When MTD is ready to execute the command, it will + * deasert both latch enables. + * + * Rather than run a separate DMA operation for every single byte, we + * queue them up and run a single DMA operation for the entire series + * of command and data bytes. + */ + if (ctrl & (NAND_ALE | NAND_CLE)) { + if (data != NAND_CMD_NONE) + nand_info->cmd_buf[nand_info->cmd_queue_len++] = data; + return; + } + + /* + * If control arrives here, MTD has deasserted both the ALE and CLE, + * which means it's ready to run an operation. Check if we have any + * bytes to send. + */ + if (nand_info->cmd_queue_len == 0) + return; + + /* Compile the DMA descriptor -- a descriptor that sends command. */ + d = mxs_nand_get_dma_desc(nand_info); + d->cmd.data = + MXS_DMA_DESC_COMMAND_DMA_READ | MXS_DMA_DESC_IRQ | + MXS_DMA_DESC_CHAIN | MXS_DMA_DESC_DEC_SEM | + MXS_DMA_DESC_WAIT4END | (3 << MXS_DMA_DESC_PIO_WORDS_OFFSET) | + (nand_info->cmd_queue_len << MXS_DMA_DESC_BYTES_OFFSET); + + d->cmd.address = (dma_addr_t)nand_info->cmd_buf; + + d->cmd.pio_words[0] = + GPMI_CTRL0_COMMAND_MODE_WRITE | + GPMI_CTRL0_WORD_LENGTH | + (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) | + GPMI_CTRL0_ADDRESS_NAND_CLE | + GPMI_CTRL0_ADDRESS_INCREMENT | + nand_info->cmd_queue_len; + + mxs_dma_desc_append(channel, d); + + /* Execute the DMA chain. */ + ret = mxs_dma_go(channel); + if (ret) + printf("MXS NAND: Error sending command\n"); + + mxs_nand_return_dma_descs(nand_info); + + /* Reset the command queue. */ + nand_info->cmd_queue_len = 0; +} + +/* + * Test if the NAND flash is ready. + */ +static int mxs_nand_device_ready(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + struct mxs_nand_info *nand_info = chip->priv; + struct mx28_gpmi_regs *gpmi_regs = + (struct mx28_gpmi_regs *)MXS_GPMI_BASE; + uint32_t tmp; + + tmp = readl(&gpmi_regs->hw_gpmi_stat); + tmp >>= (GPMI_STAT_READY_BUSY_OFFSET + nand_info->cur_chip); + + return tmp & 1; +} + +/* + * Select the NAND chip. + */ +static void mxs_nand_select_chip(struct mtd_info *mtd, int chip) +{ + struct nand_chip *nand = mtd->priv; + struct mxs_nand_info *nand_info = nand->priv; + + nand_info->cur_chip = chip; +} + +/* + * Handle block mark swapping. + * + * Note that, when this function is called, it doesn't know whether it's + * swapping the block mark, or swapping it *back* -- but it doesn't matter + * because the the operation is the same. + */ +static void mxs_nand_swap_block_mark(struct mtd_info *mtd, + uint8_t *data_buf, uint8_t *oob_buf) +{ + uint32_t bit_offset; + uint32_t buf_offset; + + uint32_t src; + uint32_t dst; + + bit_offset = mxs_nand_mark_bit_offset(mtd); + buf_offset = mxs_nand_mark_byte_offset(mtd); + + /* + * Get the byte from the data area that overlays the block mark. Since + * the ECC engine applies its own view to the bits in the page, the + * physical block mark won't (in general) appear on a byte boundary in + * the data. + */ + src = data_buf[buf_offset] >> bit_offset; + src |= data_buf[buf_offset + 1] << (8 - bit_offset); + + dst = oob_buf[0]; + + oob_buf[0] = src; + + data_buf[buf_offset] &= ~(0xff << bit_offset); + data_buf[buf_offset + 1] &= 0xff << bit_offset; + + data_buf[buf_offset] |= dst << bit_offset; + data_buf[buf_offset + 1] |= dst >> (8 - bit_offset); +} + +/* + * Read data from NAND. + */ +static void mxs_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int length) +{ + struct nand_chip *nand = mtd->priv; + struct mxs_nand_info *nand_info = nand->priv; + struct mxs_dma_desc *d; + uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip; + int ret; + + if (length > NAND_MAX_PAGESIZE) { + printf("MXS NAND: DMA buffer too big\n"); + return; + } + + if (!buf) { + printf("MXS NAND: DMA buffer is NULL\n"); + return; + } + + /* Compile the DMA descriptor - a descriptor that reads data. */ + d = mxs_nand_get_dma_desc(nand_info); + d->cmd.data = + MXS_DMA_DESC_COMMAND_DMA_WRITE | MXS_DMA_DESC_IRQ | + MXS_DMA_DESC_DEC_SEM | MXS_DMA_DESC_WAIT4END | + (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET) | + (length << MXS_DMA_DESC_BYTES_OFFSET); + + d->cmd.address = (dma_addr_t)nand_info->data_buf; + + d->cmd.pio_words[0] = + GPMI_CTRL0_COMMAND_MODE_READ | + GPMI_CTRL0_WORD_LENGTH | + (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) | + GPMI_CTRL0_ADDRESS_NAND_DATA | + length; + + mxs_dma_desc_append(channel, d); + + /* + * A DMA descriptor that waits for the command to end and the chip to + * become ready. + * + * I think we actually should *not* be waiting for the chip to become + * ready because, after all, we don't care. I think the original code + * did that and no one has re-thought it yet. + */ + d = mxs_nand_get_dma_desc(nand_info); + d->cmd.data = + MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_IRQ | + MXS_DMA_DESC_NAND_WAIT_4_READY | MXS_DMA_DESC_DEC_SEM | + MXS_DMA_DESC_WAIT4END | (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET); + + d->cmd.address = 0; + + d->cmd.pio_words[0] = + GPMI_CTRL0_COMMAND_MODE_WAIT_FOR_READY | + GPMI_CTRL0_WORD_LENGTH | + (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) | + GPMI_CTRL0_ADDRESS_NAND_DATA; + + mxs_dma_desc_append(channel, d); + + /* Execute the DMA chain. */ + ret = mxs_dma_go(channel); + if (ret) { + printf("MXS NAND: DMA read error\n"); + goto rtn; + } + + memcpy(buf, nand_info->data_buf, length); + +rtn: + mxs_nand_return_dma_descs(nand_info); +} + +/* + * Write data to NAND. + */ +static void mxs_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, + int length) +{ + struct nand_chip *nand = mtd->priv; + struct mxs_nand_info *nand_info = nand->priv; + struct mxs_dma_desc *d; + uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip; + int ret; + + if (length > NAND_MAX_PAGESIZE) { + printf("MXS NAND: DMA buffer too big\n"); + return; + } + + if (!buf) { + printf("MXS NAND: DMA buffer is NULL\n"); + return; + } + + memcpy(nand_info->data_buf, buf, length); + + /* Compile the DMA descriptor - a descriptor that writes data. */ + d = mxs_nand_get_dma_desc(nand_info); + d->cmd.data = + MXS_DMA_DESC_COMMAND_DMA_READ | MXS_DMA_DESC_IRQ | + MXS_DMA_DESC_DEC_SEM | MXS_DMA_DESC_WAIT4END | + (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET) | + (length << MXS_DMA_DESC_BYTES_OFFSET); + + d->cmd.address = (dma_addr_t)nand_info->data_buf; + + d->cmd.pio_words[0] = + GPMI_CTRL0_COMMAND_MODE_WRITE | + GPMI_CTRL0_WORD_LENGTH | + (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) | + GPMI_CTRL0_ADDRESS_NAND_DATA | + length; + + mxs_dma_desc_append(channel, d); + + /* Execute the DMA chain. */ + ret = mxs_dma_go(channel); + if (ret) + printf("MXS NAND: DMA write error\n"); + + mxs_nand_return_dma_descs(nand_info); +} + +/* + * Read a single byte from NAND. + */ +static uint8_t mxs_nand_read_byte(struct mtd_info *mtd) +{ + uint8_t buf; + mxs_nand_read_buf(mtd, &buf, 1); + return buf; +} + +/* + * Read a page from NAND. + */ +static int mxs_nand_ecc_read_page(struct mtd_info *mtd, struct nand_chip *nand, + uint8_t *buf, int page) +{ + struct mxs_nand_info *nand_info = nand->priv; + struct mxs_dma_desc *d; + uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip; + uint32_t corrected = 0, failed = 0; + uint8_t *status; + int i, ret; + + /* Compile the DMA descriptor - wait for ready. */ + d = mxs_nand_get_dma_desc(nand_info); + d->cmd.data = + MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_CHAIN | + MXS_DMA_DESC_NAND_WAIT_4_READY | MXS_DMA_DESC_WAIT4END | + (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET); + + d->cmd.address = 0; + + d->cmd.pio_words[0] = + GPMI_CTRL0_COMMAND_MODE_WAIT_FOR_READY | + GPMI_CTRL0_WORD_LENGTH | + (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) | + GPMI_CTRL0_ADDRESS_NAND_DATA; + + mxs_dma_desc_append(channel, d); + + /* Compile the DMA descriptor - enable the BCH block and read. */ + d = mxs_nand_get_dma_desc(nand_info); + d->cmd.data = + MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_CHAIN | + MXS_DMA_DESC_WAIT4END | (6 << MXS_DMA_DESC_PIO_WORDS_OFFSET); + + d->cmd.address = 0; + + d->cmd.pio_words[0] = + GPMI_CTRL0_COMMAND_MODE_READ | + GPMI_CTRL0_WORD_LENGTH | + (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) | + GPMI_CTRL0_ADDRESS_NAND_DATA | + (mtd->writesize + mtd->oobsize); + d->cmd.pio_words[1] = 0; + d->cmd.pio_words[2] = + GPMI_ECCCTRL_ENABLE_ECC | + GPMI_ECCCTRL_ECC_CMD_DECODE | + GPMI_ECCCTRL_BUFFER_MASK_BCH_PAGE; + d->cmd.pio_words[3] = mtd->writesize + mtd->oobsize; + d->cmd.pio_words[4] = (dma_addr_t)nand_info->data_buf; + d->cmd.pio_words[5] = (dma_addr_t)nand_info->oob_buf; + + mxs_dma_desc_append(channel, d); + + /* Compile the DMA descriptor - disable the BCH block. */ + d = mxs_nand_get_dma_desc(nand_info); + d->cmd.data = + MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_CHAIN | + MXS_DMA_DESC_NAND_WAIT_4_READY | MXS_DMA_DESC_WAIT4END | + (3 << MXS_DMA_DESC_PIO_WORDS_OFFSET); + + d->cmd.address = 0; + + d->cmd.pio_words[0] = + GPMI_CTRL0_COMMAND_MODE_WAIT_FOR_READY | + GPMI_CTRL0_WORD_LENGTH | + (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) | + GPMI_CTRL0_ADDRESS_NAND_DATA | + (mtd->writesize + mtd->oobsize); + d->cmd.pio_words[1] = 0; + d->cmd.pio_words[2] = 0; + + mxs_dma_desc_append(channel, d); + + /* Compile the DMA descriptor - deassert the NAND lock and interrupt. */ + d = mxs_nand_get_dma_desc(nand_info); + d->cmd.data = + MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_IRQ | + MXS_DMA_DESC_DEC_SEM; + + d->cmd.address = 0; + + mxs_dma_desc_append(channel, d); + + /* Execute the DMA chain. */ + ret = mxs_dma_go(channel); + if (ret) { + printf("MXS NAND: DMA read error\n"); + goto rtn; + } + + ret = mxs_nand_wait_for_bch_complete(); + if (ret) { + printf("MXS NAND: BCH read timeout\n"); + goto rtn; + } + + /* Read DMA completed, now do the mark swapping. */ + mxs_nand_swap_block_mark(mtd, nand_info->data_buf, nand_info->oob_buf); + + /* Loop over status bytes, accumulating ECC status. */ + status = nand_info->oob_buf + mxs_nand_aux_status_offset(); + for (i = 0; i < mxs_nand_ecc_chunk_cnt(mtd->writesize); i++) { + if (status[i] == 0x00) + continue; + + if (status[i] == 0xff) + continue; + + if (status[i] == 0xfe) { + failed++; + continue; + } + + corrected += status[i]; + } + + /* Propagate ECC status to the owning MTD. */ + mtd->ecc_stats.failed += failed; + mtd->ecc_stats.corrected += corrected; + + /* + * It's time to deliver the OOB bytes. See mxs_nand_ecc_read_oob() for + * details about our policy for delivering the OOB. + * + * We fill the caller's buffer with set bits, and then copy the block + * mark to the caller's buffer. Note that, if block mark swapping was + * necessary, it has already been done, so we can rely on the first + * byte of the auxiliary buffer to contain the block mark. + */ + memset(nand->oob_poi, 0xff, mtd->oobsize); + + nand->oob_poi[0] = nand_info->oob_buf[0]; + + memcpy(buf, nand_info->data_buf, mtd->writesize); + +rtn: + mxs_nand_return_dma_descs(nand_info); + + return ret; +} + +/* + * Write a page to NAND. + */ +static void mxs_nand_ecc_write_page(struct mtd_info *mtd, + struct nand_chip *nand, const uint8_t *buf) +{ + struct mxs_nand_info *nand_info = nand->priv; + struct mxs_dma_desc *d; + uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip; + int ret; + + memcpy(nand_info->data_buf, buf, mtd->writesize); + memcpy(nand_info->oob_buf, nand->oob_poi, mtd->oobsize); + + /* Handle block mark swapping. */ + mxs_nand_swap_block_mark(mtd, nand_info->data_buf, nand_info->oob_buf); + + /* Compile the DMA descriptor - write data. */ + d = mxs_nand_get_dma_desc(nand_info); + d->cmd.data = + MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_IRQ | + MXS_DMA_DESC_DEC_SEM | MXS_DMA_DESC_WAIT4END | + (6 << MXS_DMA_DESC_PIO_WORDS_OFFSET); + + d->cmd.address = 0; + + d->cmd.pio_words[0] = + GPMI_CTRL0_COMMAND_MODE_WRITE | + GPMI_CTRL0_WORD_LENGTH | + (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) | + GPMI_CTRL0_ADDRESS_NAND_DATA; + d->cmd.pio_words[1] = 0; + d->cmd.pio_words[2] = + GPMI_ECCCTRL_ENABLE_ECC | + GPMI_ECCCTRL_ECC_CMD_ENCODE | + GPMI_ECCCTRL_BUFFER_MASK_BCH_PAGE; + d->cmd.pio_words[3] = (mtd->writesize + mtd->oobsize); + d->cmd.pio_words[4] = (dma_addr_t)nand_info->data_buf; + d->cmd.pio_words[5] = (dma_addr_t)nand_info->oob_buf; + + mxs_dma_desc_append(channel, d); + + /* Execute the DMA chain. */ + ret = mxs_dma_go(channel); + if (ret) { + printf("MXS NAND: DMA write error\n"); + goto rtn; + } + + ret = mxs_nand_wait_for_bch_complete(); + if (ret) { + printf("MXS NAND: BCH write timeout\n"); + goto rtn; + } + +rtn: + mxs_nand_return_dma_descs(nand_info); +} + +/* + * Read OOB from NAND. + * + * This function is a veneer that replaces the function originally installed by + * the NAND Flash MTD code. + */ +static int mxs_nand_hook_read_oob(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops) +{ + struct nand_chip *chip = mtd->priv; + struct mxs_nand_info *nand_info = chip->priv; + int ret; + + if (ops->mode == MTD_OOB_RAW) + nand_info->raw_oob_mode = 1; + else + nand_info->raw_oob_mode = 0; + + ret = nand_info->hooked_read_oob(mtd, from, ops); + + nand_info->raw_oob_mode = 0; + + return ret; +} + +/* + * Write OOB to NAND. + * + * This function is a veneer that replaces the function originally installed by + * the NAND Flash MTD code. + */ +static int mxs_nand_hook_write_oob(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) +{ + struct nand_chip *chip = mtd->priv; + struct mxs_nand_info *nand_info = chip->priv; + int ret; + + if (ops->mode == MTD_OOB_RAW) + nand_info->raw_oob_mode = 1; + else + nand_info->raw_oob_mode = 0; + + ret = nand_info->hooked_write_oob(mtd, to, ops); + + nand_info->raw_oob_mode = 0; + + return ret; +} + +/* + * Mark a block bad in NAND. + * + * This function is a veneer that replaces the function originally installed by + * the NAND Flash MTD code. + */ +static int mxs_nand_hook_block_markbad(struct mtd_info *mtd, loff_t ofs) +{ + struct nand_chip *chip = mtd->priv; + struct mxs_nand_info *nand_info = chip->priv; + int ret; + + nand_info->marking_block_bad = 1; + + ret = nand_info->hooked_block_markbad(mtd, ofs); + + nand_info->marking_block_bad = 0; + + return ret; +} + +/* + * There are several places in this driver where we have to handle the OOB and + * block marks. This is the function where things are the most complicated, so + * this is where we try to explain it all. All the other places refer back to + * here. + * + * These are the rules, in order of decreasing importance: + * + * 1) Nothing the caller does can be allowed to imperil the block mark, so all + * write operations take measures to protect it. + * + * 2) In read operations, the first byte of the OOB we return must reflect the + * true state of the block mark, no matter where that block mark appears in + * the physical page. + * + * 3) ECC-based read operations return an OOB full of set bits (since we never + * allow ECC-based writes to the OOB, it doesn't matter what ECC-based reads + * return). + * + * 4) "Raw" read operations return a direct view of the physical bytes in the + * page, using the conventional definition of which bytes are data and which + * are OOB. This gives the caller a way to see the actual, physical bytes + * in the page, without the distortions applied by our ECC engine. + * + * What we do for this specific read operation depends on whether we're doing + * "raw" read, or an ECC-based read. + * + * It turns out that knowing whether we want an "ECC-based" or "raw" read is not + * easy. When reading a page, for example, the NAND Flash MTD code calls our + * ecc.read_page or ecc.read_page_raw function. Thus, the fact that MTD wants an + * ECC-based or raw view of the page is implicit in which function it calls + * (there is a similar pair of ECC-based/raw functions for writing). + * + * Since MTD assumes the OOB is not covered by ECC, there is no pair of + * ECC-based/raw functions for reading or or writing the OOB. The fact that the + * caller wants an ECC-based or raw view of the page is not propagated down to + * this driver. + * + * Since our OOB *is* covered by ECC, we need this information. So, we hook the + * ecc.read_oob and ecc.write_oob function pointers in the owning + * struct mtd_info with our own functions. These hook functions set the + * raw_oob_mode field so that, when control finally arrives here, we'll know + * what to do. + */ +static int mxs_nand_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *nand, + int page, int cmd) +{ + struct mxs_nand_info *nand_info = nand->priv; + + /* + * First, fill in the OOB buffer. If we're doing a raw read, we need to + * get the bytes from the physical page. If we're not doing a raw read, + * we need to fill the buffer with set bits. + */ + if (nand_info->raw_oob_mode) { + /* + * If control arrives here, we're doing a "raw" read. Send the + * command to read the conventional OOB and read it. + */ + nand->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page); + nand->read_buf(mtd, nand->oob_poi, mtd->oobsize); + } else { + /* + * If control arrives here, we're not doing a "raw" read. Fill + * the OOB buffer with set bits and correct the block mark. + */ + memset(nand->oob_poi, 0xff, mtd->oobsize); + + nand->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page); + mxs_nand_read_buf(mtd, nand->oob_poi, 1); + } + + return 0; + +} + +/* + * Write OOB data to NAND. + */ +static int mxs_nand_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *nand, + int page) +{ + struct mxs_nand_info *nand_info = nand->priv; + uint8_t block_mark = 0; + + /* + * There are fundamental incompatibilities between the i.MX GPMI NFC and + * the NAND Flash MTD model that make it essentially impossible to write + * the out-of-band bytes. + * + * We permit *ONE* exception. If the *intent* of writing the OOB is to + * mark a block bad, we can do that. + */ + + if (!nand_info->marking_block_bad) { + printf("NXS NAND: Writing OOB isn't supported\n"); + return -EIO; + } + + /* Write the block mark. */ + nand->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page); + nand->write_buf(mtd, &block_mark, 1); + nand->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + + /* Check if it worked. */ + if (nand->waitfunc(mtd, nand) & NAND_STATUS_FAIL) + return -EIO; + + return 0; +} + +/* + * Claims all blocks are good. + * + * In principle, this function is *only* called when the NAND Flash MTD system + * isn't allowed to keep an in-memory bad block table, so it is forced to ask + * the driver for bad block information. + * + * In fact, we permit the NAND Flash MTD system to have an in-memory BBT, so + * this function is *only* called when we take it away. + * + * Thus, this function is only called when we want *all* blocks to look good, + * so it *always* return success. + */ +static int mxs_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) +{ + return 0; +} + +/* + * Nominally, the purpose of this function is to look for or create the bad + * block table. In fact, since the we call this function at the very end of + * the initialization process started by nand_scan(), and we doesn't have a + * more formal mechanism, we "hook" this function to continue init process. + * + * At this point, the physical NAND Flash chips have been identified and + * counted, so we know the physical geometry. This enables us to make some + * important configuration decisions. + * + * The return value of this function propogates directly back to this driver's + * call to nand_scan(). Anything other than zero will cause this driver to + * tear everything down and declare failure. + */ +static int mxs_nand_scan_bbt(struct mtd_info *mtd) +{ + struct nand_chip *nand = mtd->priv; + struct mxs_nand_info *nand_info = nand->priv; + struct mx28_bch_regs *bch_regs = (struct mx28_bch_regs *)MXS_BCH_BASE; + uint32_t tmp; + + /* Configure BCH and set NFC geometry */ + mx28_reset_block(&bch_regs->hw_bch_ctrl_reg); + + /* Configure layout 0 */ + tmp = (mxs_nand_ecc_chunk_cnt(mtd->writesize) - 1) + << BCH_FLASHLAYOUT0_NBLOCKS_OFFSET; + tmp |= MXS_NAND_METADATA_SIZE << BCH_FLASHLAYOUT0_META_SIZE_OFFSET; + tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1) + << BCH_FLASHLAYOUT0_ECC0_OFFSET; + tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE; + writel(tmp, &bch_regs->hw_bch_flash0layout0); + + tmp = (mtd->writesize + mtd->oobsize) + << BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET; + tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1) + << BCH_FLASHLAYOUT1_ECCN_OFFSET; + tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE; + writel(tmp, &bch_regs->hw_bch_flash0layout1); + + /* Set *all* chip selects to use layout 0 */ + writel(0, &bch_regs->hw_bch_layoutselect); + + /* Enable BCH complete interrupt */ + writel(BCH_CTRL_COMPLETE_IRQ_EN, &bch_regs->hw_bch_ctrl_set); + + /* Hook some operations at the MTD level. */ + if (mtd->read_oob != mxs_nand_hook_read_oob) { + nand_info->hooked_read_oob = mtd->read_oob; + mtd->read_oob = mxs_nand_hook_read_oob; + } + + if (mtd->write_oob != mxs_nand_hook_write_oob) { + nand_info->hooked_write_oob = mtd->write_oob; + mtd->write_oob = mxs_nand_hook_write_oob; + } + + if (mtd->block_markbad != mxs_nand_hook_block_markbad) { + nand_info->hooked_block_markbad = mtd->block_markbad; + mtd->block_markbad = mxs_nand_hook_block_markbad; + } + + /* We use the reference implementation for bad block management. */ + return nand_default_bbt(mtd); +} + +/* + * Allocate DMA buffers + */ +int mxs_nand_alloc_buffers(struct mxs_nand_info *nand_info) +{ + uint8_t *buf; + const int size = NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE; + + /* DMA buffers */ + buf = memalign(MXS_DMA_ALIGNMENT, size); + if (!buf) { + printf("MXS NAND: Error allocating DMA buffers\n"); + return -ENOMEM; + } + + memset(buf, 0, size); + + nand_info->data_buf = buf; + nand_info->oob_buf = buf + NAND_MAX_PAGESIZE; + + /* Command buffers */ + nand_info->cmd_buf = memalign(MXS_DMA_ALIGNMENT, + MXS_NAND_COMMAND_BUFFER_SIZE); + if (!nand_info->cmd_buf) { + free(buf); + printf("MXS NAND: Error allocating command buffers\n"); + return -ENOMEM; + } + memset(nand_info->cmd_buf, 0, MXS_NAND_COMMAND_BUFFER_SIZE); + nand_info->cmd_queue_len = 0; + + return 0; +} + +/* + * Initializes the NFC hardware. + */ +int mxs_nand_init(struct mxs_nand_info *info) +{ + struct mx28_gpmi_regs *gpmi_regs = + (struct mx28_gpmi_regs *)MXS_GPMI_BASE; + int i = 0; + + info->desc = malloc(sizeof(struct mxs_dma_desc *) * + MXS_NAND_DMA_DESCRIPTOR_COUNT); + if (!info->desc) + goto err1; + + /* Allocate the DMA descriptors. */ + for (i = 0; i < MXS_NAND_DMA_DESCRIPTOR_COUNT; i++) { + info->desc[i] = mxs_dma_desc_alloc(); + if (!info->desc[i]) + goto err2; + } + + /* Init the DMA controller. */ + mxs_dma_init(); + + /* Reset the GPMI block. */ + mx28_reset_block(&gpmi_regs->hw_gpmi_ctrl0_reg); + + /* + * Choose NAND mode, set IRQ polarity, disable write protection and + * select BCH ECC. + */ + clrsetbits_le32(&gpmi_regs->hw_gpmi_ctrl1, + GPMI_CTRL1_GPMI_MODE, + GPMI_CTRL1_ATA_IRQRDY_POLARITY | GPMI_CTRL1_DEV_RESET | + GPMI_CTRL1_BCH_MODE); + + return 0; + +err2: + free(info->desc); +err1: + for (--i; i >= 0; i--) + mxs_dma_desc_free(info->desc[i]); + printf("MXS NAND: Unable to allocate DMA descriptors\n"); + return -ENOMEM; +} + +/*! + * This function is called during the driver binding process. + * + * @param pdev the device structure used to store device specific + * information that is used by the suspend, resume and + * remove functions + * + * @return The function always returns 0. + */ +int board_nand_init(struct nand_chip *nand) +{ + struct mxs_nand_info *nand_info; + int err; + + nand_info = malloc(sizeof(struct mxs_nand_info)); + if (!nand_info) { + printf("MXS NAND: Failed to allocate private data\n"); + return -ENOMEM; + } + memset(nand_info, 0, sizeof(struct mxs_nand_info)); + + err = mxs_nand_alloc_buffers(nand_info); + if (err) + goto err1; + + err = mxs_nand_init(nand_info); + if (err) + goto err2; + + memset(&fake_ecc_layout, 0, sizeof(fake_ecc_layout)); + + nand->priv = nand_info; + nand->options |= NAND_NO_SUBPAGE_WRITE; + + nand->cmd_ctrl = mxs_nand_cmd_ctrl; + + nand->dev_ready = mxs_nand_device_ready; + nand->select_chip = mxs_nand_select_chip; + nand->block_bad = mxs_nand_block_bad; + nand->scan_bbt = mxs_nand_scan_bbt; + + nand->read_byte = mxs_nand_read_byte; + + nand->read_buf = mxs_nand_read_buf; + nand->write_buf = mxs_nand_write_buf; + + nand->ecc.read_page = mxs_nand_ecc_read_page; + nand->ecc.write_page = mxs_nand_ecc_write_page; + nand->ecc.read_oob = mxs_nand_ecc_read_oob; + nand->ecc.write_oob = mxs_nand_ecc_write_oob; + + nand->ecc.layout = &fake_ecc_layout; + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.bytes = 9; + nand->ecc.size = 512; + + return 0; + +err2: + free(nand_info->data_buf); + free(nand_info->cmd_buf); +err1: + free(nand_info); + return err; +} diff --git a/drivers/mtd/onenand/Makefile b/drivers/mtd/onenand/Makefile index b984bd4a2..b090d40ea 100644 --- a/drivers/mtd/onenand/Makefile +++ b/drivers/mtd/onenand/Makefile @@ -25,8 +25,12 @@ include $(TOPDIR)/config.mk LIB := $(obj)libonenand.o +ifndef CONFIG_SPL_BUILD COBJS-$(CONFIG_CMD_ONENAND) := onenand_uboot.o onenand_base.o onenand_bbt.o COBJS-$(CONFIG_SAMSUNG_ONENAND) += samsung.o +else +COBJS-y := onenand_spl.o +endif COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 24e02c284..06f187fdd 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -1943,16 +1943,10 @@ static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int { struct onenand_chip *this = mtd->priv; int start, end, block, value, status; - int wp_status_mask; start = onenand_block(this, ofs); end = onenand_block(this, ofs + len); - if (cmd == ONENAND_CMD_LOCK) - wp_status_mask = ONENAND_WP_LS; - else - wp_status_mask = ONENAND_WP_US; - /* Continuous lock scheme */ if (this->options & ONENAND_HAS_CONT_LOCK) { /* Set start block address */ @@ -2226,19 +2220,21 @@ static const struct onenand_manufacturers onenand_manuf_ids[] = { static int onenand_check_maf(int manuf) { int size = ARRAY_SIZE(onenand_manuf_ids); - char *name; int i; +#ifdef ONENAND_DEBUG + char *name; +#endif for (i = 0; i < size; i++) if (manuf == onenand_manuf_ids[i].id) break; +#ifdef ONENAND_DEBUG if (i < size) name = onenand_manuf_ids[i].name; else name = "Unknown"; -#ifdef ONENAND_DEBUG printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n", name, manuf); #endif @@ -2255,7 +2251,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd) { struct onenand_chip *this = mtd->priv; unsigned int die, bdry; - int ret, syscfg, locked; + int syscfg, locked; /* Disable ECC */ syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1); @@ -2266,7 +2262,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd) this->wait(mtd, FL_SYNCING); this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0); - ret = this->wait(mtd, FL_READING); + this->wait(mtd, FL_READING); bdry = this->read_word(this->base + ONENAND_DATARAM); if ((bdry >> FLEXONENAND_PI_UNLOCK_SHIFT) == 3) @@ -2276,7 +2272,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd) this->boundary[die] = bdry & FLEXONENAND_PI_MASK; this->command(mtd, ONENAND_CMD_RESET, 0, 0); - ret = this->wait(mtd, FL_RESETING); + this->wait(mtd, FL_RESETING); printk(KERN_INFO "Die %d boundary: %d%s\n", die, this->boundary[die], locked ? "(Locked)" : "(Unlocked)"); diff --git a/drivers/mtd/onenand/onenand_spl.c b/drivers/mtd/onenand/onenand_spl.c new file mode 100644 index 000000000..50eaa7188 --- /dev/null +++ b/drivers/mtd/onenand/onenand_spl.c @@ -0,0 +1,146 @@ +/* + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * + * Based on code: + * Copyright (C) 2005-2009 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <linux/mtd/onenand_regs.h> +#include <onenand_uboot.h> + +/* + * Device geometry: + * - 2048b page, 128k erase block. + * - 4096b page, 256k erase block. + */ +enum onenand_spl_pagesize { + PAGE_2K = 2048, + PAGE_4K = 4096, +}; + +#define ONENAND_PAGES_PER_BLOCK 64 +#define onenand_block_address(block) (block) +#define onenand_sector_address(page) (page << 2) +#define onenand_buffer_address() ((1 << 3) << 8) +#define onenand_bufferram_address(block) (0) + +static inline uint16_t onenand_readw(uint32_t addr) +{ + return readw(CONFIG_SYS_ONENAND_BASE + addr); +} + +static inline void onenand_writew(uint16_t value, uint32_t addr) +{ + writew(value, CONFIG_SYS_ONENAND_BASE + addr); +} + +static enum onenand_spl_pagesize onenand_spl_get_geometry(void) +{ + uint32_t dev_id, density; + + if (!onenand_readw(ONENAND_REG_TECHNOLOGY)) { + dev_id = onenand_readw(ONENAND_REG_DEVICE_ID); + density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT; + density &= ONENAND_DEVICE_DENSITY_MASK; + + if (density < ONENAND_DEVICE_DENSITY_4Gb) + return PAGE_2K; + + if (dev_id & ONENAND_DEVICE_IS_DDP) + return PAGE_2K; + } + + return PAGE_4K; +} + +static int onenand_spl_read_page(uint32_t block, uint32_t page, uint32_t *buf, + enum onenand_spl_pagesize pagesize) +{ + const uint32_t addr = CONFIG_SYS_ONENAND_BASE + ONENAND_DATARAM; + uint32_t offset; + + onenand_writew(onenand_block_address(block), + ONENAND_REG_START_ADDRESS1); + + onenand_writew(onenand_bufferram_address(block), + ONENAND_REG_START_ADDRESS2); + + onenand_writew(onenand_sector_address(page), + ONENAND_REG_START_ADDRESS8); + + onenand_writew(onenand_buffer_address(), + ONENAND_REG_START_BUFFER); + + onenand_writew(ONENAND_INT_CLEAR, ONENAND_REG_INTERRUPT); + + onenand_writew(ONENAND_CMD_READ, ONENAND_REG_COMMAND); + + while (!(onenand_readw(ONENAND_REG_INTERRUPT) & ONENAND_INT_READ)) + continue; + + /* Check for invalid block mark */ + if (page < 2 && (onenand_readw(ONENAND_SPARERAM) != 0xffff)) + return 1; + + for (offset = 0; offset < pagesize; offset += 4) + buf[offset / 4] = readl(addr + offset); + + return 0; +} + +void onenand_spl_load_image(uint32_t offs, uint32_t size, void *dst) +{ + uint32_t *addr = (uint32_t *)dst; + uint32_t total_pages; + uint32_t block; + uint32_t page, rpage; + enum onenand_spl_pagesize pagesize; + int ret; + + pagesize = onenand_spl_get_geometry(); + + /* + * The page can be either 2k or 4k, avoid using DIV_ROUND_UP to avoid + * pulling further unwanted functions into the SPL. + */ + if (pagesize == 2048) { + total_pages = DIV_ROUND_UP(size, 2048); + page = offs / 2048; + } else { + total_pages = DIV_ROUND_UP(size, 4096); + page = offs / 4096; + } + + for (; page <= total_pages; page++) { + block = page / ONENAND_PAGES_PER_BLOCK; + rpage = page & (ONENAND_PAGES_PER_BLOCK - 1); + ret = onenand_spl_read_page(block, rpage, addr, pagesize); + if (ret) { + total_pages += ONENAND_PAGES_PER_BLOCK; + page += ONENAND_PAGES_PER_BLOCK - 1; + } else { + addr += pagesize / 4; + } + } +} diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index fa31159a0..36c33af66 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -85,15 +85,17 @@ static int emac_rx_queue_active = 0; /* Receive packet buffers */ static unsigned char emac_rx_buffers[EMAC_MAX_RX_BUFFERS * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)]; -#define MAX_PHY 3 +#ifndef CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT +#define CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT 3 +#endif /* PHY address for a discovered PHY (0xff - not found) */ -static u_int8_t active_phy_addr[MAX_PHY] = { 0xff, 0xff, 0xff }; +static u_int8_t active_phy_addr[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT]; /* number of PHY found active */ static u_int8_t num_phy; -phy_t phy[MAX_PHY]; +phy_t phy[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT]; static int davinci_eth_set_mac_addr(struct eth_device *dev) { @@ -160,9 +162,8 @@ static int davinci_eth_phy_detect(void) int j; unsigned int count = 0; - active_phy_addr[0] = 0xff; - active_phy_addr[1] = 0xff; - active_phy_addr[2] = 0xff; + for (i = 0; i < CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT; i++) + active_phy_addr[i] = 0xff; udelay(1000); phy_act_state = readl(&adap_mdio->ALIVE); @@ -175,7 +176,14 @@ static int davinci_eth_phy_detect(void) for (i = 0, j = 0; i < 32; i++) if (phy_act_state & (1 << i)) { count++; - active_phy_addr[j++] = i; + if (count < CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT) { + active_phy_addr[j++] = i; + } else { + printf("%s: to many PHYs detected.\n", + __func__); + count = 0; + break; + } } num_phy = count; @@ -752,7 +760,7 @@ int davinci_emac_initialize(void) if (!ret) return(0); else - printf(" %d ETH PHY detected\n", ret); + debug_emac(" %d ETH PHY detected\n", ret); /* Get PHY ID and initialize phy_ops for a detected PHY */ for (i = 0; i < num_phy; i++) { diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 0c0c7cd2c..b05a4c0c9 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -42,6 +42,14 @@ DECLARE_GLOBAL_DATA_PTR; #define CONFIG_FEC_XCV_TYPE MII100 #endif +/* + * The i.MX28 operates with packets in big endian. We need to swap them before + * sending and after receiving. + */ +#ifdef CONFIG_MX28 +#define CONFIG_FEC_MXC_SWAP_PACKET +#endif + #undef DEBUG struct nbuf { @@ -51,6 +59,32 @@ struct nbuf { uint8_t head[16]; /**< MAC header(6 + 6 + 2) + 2(aligned) */ }; +#ifdef CONFIG_FEC_MXC_SWAP_PACKET +static void swap_packet(uint32_t *packet, int length) +{ + int i; + + for (i = 0; i < DIV_ROUND_UP(length, 4); i++) + packet[i] = __swab32(packet[i]); +} +#endif + +/* + * The i.MX28 has two ethernet interfaces, but they are not equal. + * Only the first one can access the MDIO bus. + */ +#ifdef CONFIG_MX28 +static inline struct ethernet_regs *fec_miiphy_fec_to_eth(struct fec_priv *fec) +{ + return (struct ethernet_regs *)MXS_ENET0_BASE; +} +#else +static inline struct ethernet_regs *fec_miiphy_fec_to_eth(struct fec_priv *fec) +{ + return fec->eth; +} +#endif + /* * MII-interface related functions */ @@ -59,7 +93,7 @@ static int fec_miiphy_read(const char *dev, uint8_t phyAddr, uint8_t regAddr, { struct eth_device *edev = eth_get_dev_by_name(dev); struct fec_priv *fec = (struct fec_priv *)edev->priv; - struct ethernet_regs *eth = fec->eth; + struct ethernet_regs *eth = fec_miiphy_fec_to_eth(fec); uint32_t reg; /* convenient holder for the PHY register */ uint32_t phy; /* convenient holder for the PHY */ @@ -117,7 +151,7 @@ static int fec_miiphy_write(const char *dev, uint8_t phyAddr, uint8_t regAddr, { struct eth_device *edev = eth_get_dev_by_name(dev); struct fec_priv *fec = (struct fec_priv *)edev->priv; - struct ethernet_regs *eth = fec->eth; + struct ethernet_regs *eth = fec_miiphy_fec_to_eth(fec); uint32_t reg; /* convenient holder for the PHY register */ uint32_t phy; /* convenient holder for the PHY */ @@ -572,6 +606,9 @@ static int fec_send(struct eth_device *dev, volatile void* packet, int length) * Note: We are always using the first buffer for transmission, * the second will be empty and only used to stop the DMA engine */ +#ifdef CONFIG_FEC_MXC_SWAP_PACKET + swap_packet((uint32_t *)packet, length); +#endif writew(length, &fec->tbd_base[fec->tbd_index].data_length); writel((uint32_t)packet, &fec->tbd_base[fec->tbd_index].data_pointer); /* @@ -668,6 +705,9 @@ static int fec_recv(struct eth_device *dev) /* * Fill the buffer and pass it to upper layers */ +#ifdef CONFIG_FEC_MXC_SWAP_PACKET + swap_packet((uint32_t *)frame->data, frame_length); +#endif memcpy(buff, frame->data, frame_length); NetReceive(buff, frame_length); len = frame_length; diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index a16f59051..faf4fcdb8 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -57,6 +57,7 @@ COBJS-$(CONFIG_RTC_MK48T59) += mk48t59.o COBJS-$(CONFIG_RTC_MPC5200) += mpc5xxx.o COBJS-$(CONFIG_RTC_MPC8xx) += mpc8xx.o COBJS-$(CONFIG_RTC_MV) += mvrtc.o +COBJS-$(CONFIG_RTC_MXS) += mxsrtc.o COBJS-$(CONFIG_RTC_PCF8563) += pcf8563.o COBJS-$(CONFIG_RTC_PL031) += pl031.o COBJS-$(CONFIG_RTC_PT7C4338) += pt7c4338.o diff --git a/drivers/rtc/mxsrtc.c b/drivers/rtc/mxsrtc.c new file mode 100644 index 000000000..5beb1a044 --- /dev/null +++ b/drivers/rtc/mxsrtc.c @@ -0,0 +1,86 @@ +/* + * Freescale i.MX28 RTC Driver + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <common.h> +#include <rtc.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> + +#define MXS_RTC_MAX_TIMEOUT 1000000 + +/* Set time in seconds since 1970-01-01 */ +int mxs_rtc_set_time(uint32_t secs) +{ + struct mx28_rtc_regs *rtc_regs = (struct mx28_rtc_regs *)MXS_RTC_BASE; + int ret; + + writel(secs, &rtc_regs->hw_rtc_seconds); + + /* + * The 0x80 here means seconds were copied to analog. This information + * is taken from the linux kernel driver for the STMP37xx RTC since + * documentation doesn't mention it. + */ + ret = mx28_wait_mask_clr(&rtc_regs->hw_rtc_stat_reg, + 0x80 << RTC_STAT_STALE_REGS_OFFSET, MXS_RTC_MAX_TIMEOUT); + + if (ret) + printf("MXS RTC: Timeout waiting for update\n"); + + return ret; +} + +int rtc_get(struct rtc_time *time) +{ + struct mx28_rtc_regs *rtc_regs = (struct mx28_rtc_regs *)MXS_RTC_BASE; + uint32_t secs; + + secs = readl(&rtc_regs->hw_rtc_seconds); + to_tm(secs, time); + + return 0; +} + +int rtc_set(struct rtc_time *time) +{ + uint32_t secs; + + secs = mktime(time->tm_year, time->tm_mon, time->tm_mday, + time->tm_hour, time->tm_min, time->tm_sec); + + return mxs_rtc_set_time(secs); +} + +void rtc_reset(void) +{ + struct mx28_rtc_regs *rtc_regs = (struct mx28_rtc_regs *)MXS_RTC_BASE; + int ret; + + /* Set time to 1970-01-01 */ + mxs_rtc_set_time(0); + + /* Reset the RTC block */ + ret = mx28_reset_block(&rtc_regs->hw_rtc_ctrl_reg); + if (ret) + printf("MXS RTC: Block reset timeout\n"); +} diff --git a/drivers/serial/serial_pxa.c b/drivers/serial/serial_pxa.c index 68469a4f3..84bb17c11 100644 --- a/drivers/serial/serial_pxa.c +++ b/drivers/serial/serial_pxa.c @@ -1,4 +1,6 @@ /* + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * * (C) Copyright 2002 * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> * @@ -32,148 +34,161 @@ #include <watchdog.h> #include <serial.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/regs-uart.h> #include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; -#define FFUART_INDEX 0 -#define BTUART_INDEX 1 -#define STUART_INDEX 2 +/* + * The numbering scheme differs here for PXA25x, PXA27x and PXA3xx so we can + * easily handle enabling of clock. + */ +#ifdef CONFIG_CPU_MONAHANS +#define UART_CLK_BASE CKENA_21_BTUART +#define UART_CLK_REG CKENA +#define BTUART_INDEX 0 +#define FFUART_INDEX 1 +#define STUART_INDEX 2 +#elif CONFIG_PXA250 +#define UART_CLK_BASE (1 << 4) /* HWUART */ +#define UART_CLK_REG CKEN +#define HWUART_INDEX 0 +#define STUART_INDEX 1 +#define FFUART_INDEX 2 +#define BTUART_INDEX 3 +#else /* PXA27x */ +#define UART_CLK_BASE CKEN5_STUART +#define UART_CLK_REG CKEN +#define STUART_INDEX 0 +#define FFUART_INDEX 1 +#define BTUART_INDEX 2 +#endif + +/* + * Only PXA250 has HWUART, to avoid poluting the code with more macros, + * artificially introduce this. + */ +#ifndef CONFIG_PXA250 +#define HWUART_INDEX 0xff +#endif #ifndef CONFIG_SERIAL_MULTI -#if defined (CONFIG_FFUART) +#if defined(CONFIG_FFUART) #define UART_INDEX FFUART_INDEX -#elif defined (CONFIG_BTUART) +#elif defined(CONFIG_BTUART) #define UART_INDEX BTUART_INDEX -#elif defined (CONFIG_STUART) +#elif defined(CONFIG_STUART) #define UART_INDEX STUART_INDEX +#elif defined(CONFIG_HWUART) +#define UART_INDEX HWUART_INDEX #else -#error "Bad: you didn't configure serial ..." +#error "Please select CONFIG_(FF|BT|ST|HW)UART in board config file." #endif #endif -void pxa_setbrg_dev (unsigned int uart_index) +uint32_t pxa_uart_get_baud_divider(void) { - unsigned int quot = 0; - if (gd->baudrate == 1200) - quot = 768; + return 768; else if (gd->baudrate == 9600) - quot = 96; + return 96; else if (gd->baudrate == 19200) - quot = 48; + return 48; else if (gd->baudrate == 38400) - quot = 24; + return 24; else if (gd->baudrate == 57600) - quot = 16; + return 16; else if (gd->baudrate == 115200) - quot = 8; - else - hang (); + return 8; + else /* Unsupported baudrate */ + return 0; +} +struct pxa_uart_regs *pxa_uart_index_to_regs(uint32_t uart_index) +{ switch (uart_index) { - case FFUART_INDEX: -#ifdef CONFIG_CPU_MONAHANS - writel(readl(CKENA) | CKENA_22_FFUART, CKENA); -#else - writel(readl(CKEN) | CKEN6_FFUART, CKEN); -#endif /* CONFIG_CPU_MONAHANS */ + case FFUART_INDEX: return (struct pxa_uart_regs *)FFUART_BASE; + case BTUART_INDEX: return (struct pxa_uart_regs *)BTUART_BASE; + case STUART_INDEX: return (struct pxa_uart_regs *)STUART_BASE; + case HWUART_INDEX: return (struct pxa_uart_regs *)HWUART_BASE; + default: + return NULL; + } +} - writel(0, FFIER); /* Disable for now */ - writel(0, FFFCR); /* No fifos enabled */ +void pxa_uart_toggle_clock(uint32_t uart_index, int enable) +{ + uint32_t clk_reg, clk_offset, reg; - /* set baud rate */ - writel(LCR_WLS0 | LCR_WLS1 | LCR_DLAB, FFLCR); - writel(quot & 0xff, FFDLL); - writel(quot >> 8, FFDLH); - writel(LCR_WLS0 | LCR_WLS1, FFLCR); + clk_reg = UART_CLK_REG; + clk_offset = UART_CLK_BASE << uart_index; - writel(IER_UUE, FFIER); /* Enable FFUART */ - break; + reg = readl(clk_reg); - case BTUART_INDEX: -#ifdef CONFIG_CPU_MONAHANS - writel(readl(CKENA) | CKENA_21_BTUART, CKENA); -#else - writel(readl(CKEN) | CKEN7_BTUART, CKEN); -#endif /* CONFIG_CPU_MONAHANS */ - - writel(0, BTIER); - writel(0, BTFCR); + if (enable) + reg |= clk_offset; + else + reg &= ~clk_offset; - /* set baud rate */ - writel(LCR_DLAB, BTLCR); - writel(quot & 0xff, BTDLL); - writel(quot >> 8, BTDLH); - writel(LCR_WLS0 | LCR_WLS1, BTLCR); + writel(reg, clk_reg); +} - writel(IER_UUE, BTIER); /* Enable BFUART */ +/* + * Enable clock and set baud rate, parity etc. + */ +void pxa_setbrg_dev(uint32_t uart_index) +{ + uint32_t divider = 0; + struct pxa_uart_regs *uart_regs; - break; + divider = pxa_uart_get_baud_divider(); + if (!divider) + hang(); - case STUART_INDEX: -#ifdef CONFIG_CPU_MONAHANS - writel(readl(CKENA) | CKENA_23_STUART, CKENA); -#else - writel(readl(CKEN) | CKEN5_STUART, CKEN); -#endif /* CONFIG_CPU_MONAHANS */ + uart_regs = pxa_uart_index_to_regs(uart_index); + if (!uart_regs) + hang(); - writel(0, STIER); - writel(0, STFCR); + pxa_uart_toggle_clock(uart_index, 1); - /* set baud rate */ - writel(LCR_DLAB, STLCR); - writel(quot & 0xff, STDLL); - writel(quot >> 8, STDLH); - writel(LCR_WLS0 | LCR_WLS1, STLCR); + /* Disable interrupts and FIFOs */ + writel(0, &uart_regs->ier); + writel(0, &uart_regs->fcr); - writel(IER_UUE, STIER); /* Enable STUART */ - break; + /* Set baud rate */ + writel(LCR_WLS0 | LCR_WLS1 | LCR_DLAB, &uart_regs->lcr); + writel(divider & 0xff, &uart_regs->dll); + writel(divider >> 8, &uart_regs->dlh); + writel(LCR_WLS0 | LCR_WLS1, &uart_regs->lcr); - default: - hang(); - } + /* Enable UART */ + writel(IER_UUE, &uart_regs->ier); } - /* * Initialise the serial port with the given baudrate. The settings * are always 8 data bits, no parity, 1 stop bit, no start bits. - * */ -int pxa_init_dev (unsigned int uart_index) +int pxa_init_dev(unsigned int uart_index) { pxa_setbrg_dev (uart_index); - - return (0); + return 0; } - /* * Output a single byte to the serial port. */ -void pxa_putc_dev (unsigned int uart_index,const char c) +void pxa_putc_dev(unsigned int uart_index, const char c) { - switch (uart_index) { - case FFUART_INDEX: - /* wait for room in the tx FIFO on FFUART */ - while ((readl(FFLSR) & LSR_TEMT) == 0) - WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ - writel(c, FFTHR); - break; + struct pxa_uart_regs *uart_regs; - case BTUART_INDEX: - while ((readl(BTLSR) & LSR_TEMT) == 0) - WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ - writel(c, BTTHR); - break; + uart_regs = pxa_uart_index_to_regs(uart_index); + if (!uart_regs) + hang(); - case STUART_INDEX: - while ((readl(STLSR) & LSR_TEMT) == 0) - WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */ - writel(c, STTHR); - break; - } + while (!(readl(&uart_regs->lsr) & LSR_TEMT)) + WATCHDOG_RESET(); + writel(c, &uart_regs->thr); /* If \n, also do \r */ if (c == '\n') @@ -185,17 +200,15 @@ void pxa_putc_dev (unsigned int uart_index,const char c) * otherwise. When the function is succesfull, the character read is * written into its argument c. */ -int pxa_tstc_dev (unsigned int uart_index) +int pxa_tstc_dev(unsigned int uart_index) { - switch (uart_index) { - case FFUART_INDEX: - return readl(FFLSR) & LSR_DR; - case BTUART_INDEX: - return readl(BTLSR) & LSR_DR; - case STUART_INDEX: - return readl(STLSR) & LSR_DR; - } - return -1; + struct pxa_uart_regs *uart_regs; + + uart_regs = pxa_uart_index_to_regs(uart_index); + if (!uart_regs) + return -1; + + return readl(&uart_regs->lsr) & LSR_DR; } /* @@ -203,187 +216,86 @@ int pxa_tstc_dev (unsigned int uart_index) * otherwise. When the function is succesfull, the character read is * written into its argument c. */ -int pxa_getc_dev (unsigned int uart_index) -{ - switch (uart_index) { - case FFUART_INDEX: - while (!(readl(FFLSR) & LSR_DR)) - /* Reset HW Watchdog, if needed */ - WATCHDOG_RESET(); - return (char) readl(FFRBR) & 0xff; - - case BTUART_INDEX: - while (!(readl(BTLSR) & LSR_DR)) - /* Reset HW Watchdog, if needed */ - WATCHDOG_RESET(); - return (char) readl(BTRBR) & 0xff; - case STUART_INDEX: - while (!(readl(STLSR) & LSR_DR)) - /* Reset HW Watchdog, if needed */ - WATCHDOG_RESET(); - return (char) readl(STRBR) & 0xff; - } - return -1; -} - -void -pxa_puts_dev (unsigned int uart_index,const char *s) +int pxa_getc_dev(unsigned int uart_index) { - while (*s) { - pxa_putc_dev (uart_index,*s++); - } -} + struct pxa_uart_regs *uart_regs; -#if defined (CONFIG_FFUART) -static int ffuart_init(void) -{ - return pxa_init_dev(FFUART_INDEX); -} + uart_regs = pxa_uart_index_to_regs(uart_index); + if (!uart_regs) + return -1; -static void ffuart_setbrg(void) -{ - return pxa_setbrg_dev(FFUART_INDEX); + while (!(readl(&uart_regs->lsr) & LSR_DR)) + WATCHDOG_RESET(); + return readl(&uart_regs->rbr) & 0xff; } -static void ffuart_putc(const char c) +void pxa_puts_dev(unsigned int uart_index, const char *s) { - return pxa_putc_dev(FFUART_INDEX,c); + while (*s) + pxa_putc_dev(uart_index, *s++); } -static void ffuart_puts(const char *s) -{ - return pxa_puts_dev(FFUART_INDEX,s); -} +#define pxa_uart(uart, UART) \ + int uart##_init(void) \ + { \ + return pxa_init_dev(UART##_INDEX); \ + } \ + \ + void uart##_setbrg(void) \ + { \ + return pxa_setbrg_dev(UART##_INDEX); \ + } \ + \ + void uart##_putc(const char c) \ + { \ + return pxa_putc_dev(UART##_INDEX, c); \ + } \ + \ + void uart##_puts(const char *s) \ + { \ + return pxa_puts_dev(UART##_INDEX, s); \ + } \ + \ + int uart##_getc(void) \ + { \ + return pxa_getc_dev(UART##_INDEX); \ + } \ + \ + int uart##_tstc(void) \ + { \ + return pxa_tstc_dev(UART##_INDEX); \ + } \ -static int ffuart_getc(void) -{ - return pxa_getc_dev(FFUART_INDEX); -} +#define pxa_uart_desc(uart) \ + struct serial_device serial_##uart##_device = \ + { \ + "serial_"#uart, \ + uart##_init, \ + NULL, \ + uart##_setbrg, \ + uart##_getc, \ + uart##_tstc, \ + uart##_putc, \ + uart##_puts, \ + }; -static int ffuart_tstc(void) -{ - return pxa_tstc_dev(FFUART_INDEX); -} +#define pxa_uart_multi(uart, UART) \ + pxa_uart(uart, UART) \ + pxa_uart_desc(uart) -struct serial_device serial_ffuart_device = -{ - "serial_ffuart", - ffuart_init, - NULL, - ffuart_setbrg, - ffuart_getc, - ffuart_tstc, - ffuart_putc, - ffuart_puts, -}; +#if defined(CONFIG_HWUART) + pxa_uart_multi(hwuart, HWUART) #endif - -#if defined (CONFIG_BTUART) -static int btuart_init(void) -{ - return pxa_init_dev(BTUART_INDEX); -} - -static void btuart_setbrg(void) -{ - return pxa_setbrg_dev(BTUART_INDEX); -} - -static void btuart_putc(const char c) -{ - return pxa_putc_dev(BTUART_INDEX,c); -} - -static void btuart_puts(const char *s) -{ - return pxa_puts_dev(BTUART_INDEX,s); -} - -static int btuart_getc(void) -{ - return pxa_getc_dev(BTUART_INDEX); -} - -static int btuart_tstc(void) -{ - return pxa_tstc_dev(BTUART_INDEX); -} - -struct serial_device serial_btuart_device = -{ - "serial_btuart", - btuart_init, - NULL, - btuart_setbrg, - btuart_getc, - btuart_tstc, - btuart_putc, - btuart_puts, -}; +#if defined(CONFIG_STUART) + pxa_uart_multi(stuart, STUART) #endif - -#if defined (CONFIG_STUART) -static int stuart_init(void) -{ - return pxa_init_dev(STUART_INDEX); -} - -static void stuart_setbrg(void) -{ - return pxa_setbrg_dev(STUART_INDEX); -} - -static void stuart_putc(const char c) -{ - return pxa_putc_dev(STUART_INDEX,c); -} - -static void stuart_puts(const char *s) -{ - return pxa_puts_dev(STUART_INDEX,s); -} - -static int stuart_getc(void) -{ - return pxa_getc_dev(STUART_INDEX); -} - -static int stuart_tstc(void) -{ - return pxa_tstc_dev(STUART_INDEX); -} - -struct serial_device serial_stuart_device = -{ - "serial_stuart", - stuart_init, - NULL, - stuart_setbrg, - stuart_getc, - stuart_tstc, - stuart_putc, - stuart_puts, -}; +#if defined(CONFIG_FFUART) + pxa_uart_multi(ffuart, FFUART) +#endif +#if defined(CONFIG_BTUART) + pxa_uart_multi(btuart, BTUART) #endif - -#ifndef CONFIG_SERIAL_MULTI -inline int serial_init(void) { - return (pxa_init_dev(UART_INDEX)); -} -void serial_setbrg(void) { - pxa_setbrg_dev(UART_INDEX); -} -int serial_getc(void) { - return(pxa_getc_dev(UART_INDEX)); -} -int serial_tstc(void) { - return(pxa_tstc_dev(UART_INDEX)); -} -void serial_putc(const char c) { - pxa_putc_dev(UART_INDEX,c); -} -void serial_puts(const char *s) { - pxa_puts_dev(UART_INDEX,s); -} -#endif /* CONFIG_SERIAL_MULTI */ +#ifndef CONFIG_SERIAL_MULTI + pxa_uart(serial, UART) +#endif diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 84ad6fade..6f389f093 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -37,6 +37,7 @@ COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o COBJS-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o +COBJS-$(CONFIG_MXS_SPI) += mxs_spi.o COBJS-$(CONFIG_OC_TINY_SPI) += oc_tiny_spi.o COBJS-$(CONFIG_OMAP3_SPI) += omap3_spi.o COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c new file mode 100644 index 000000000..4c27fef3d --- /dev/null +++ b/drivers/spi/mxs_spi.c @@ -0,0 +1,186 @@ +/* + * Freescale i.MX28 SPI driver + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * NOTE: This driver only supports the SPI-controller chipselects, + * GPIO driven chipselects are not supported. + */ + +#include <common.h> +#include <malloc.h> +#include <spi.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> + +#define MXS_SPI_MAX_TIMEOUT 1000000 +#define MXS_SPI_PORT_OFFSET 0x2000 + +struct mxs_spi_slave { + struct spi_slave slave; + uint32_t max_khz; + uint32_t mode; + struct mx28_ssp_regs *regs; +}; + +static inline struct mxs_spi_slave *to_mxs_slave(struct spi_slave *slave) +{ + return container_of(slave, struct mxs_spi_slave, slave); +} + +void spi_init(void) +{ +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct mxs_spi_slave *mxs_slave; + uint32_t addr; + + if (bus > 3) { + printf("MXS SPI: Max bus number is 3\n"); + return NULL; + } + + mxs_slave = malloc(sizeof(struct mxs_spi_slave)); + if (!mxs_slave) + return NULL; + + addr = MXS_SSP0_BASE + (bus * MXS_SPI_PORT_OFFSET); + + mxs_slave->slave.bus = bus; + mxs_slave->slave.cs = cs; + mxs_slave->max_khz = max_hz / 1000; + mxs_slave->mode = mode; + mxs_slave->regs = (struct mx28_ssp_regs *)addr; + + return &mxs_slave->slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave); + free(mxs_slave); +} + +int spi_claim_bus(struct spi_slave *slave) +{ + struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave); + struct mx28_ssp_regs *ssp_regs = mxs_slave->regs; + uint32_t reg = 0; + + mx28_reset_block(&ssp_regs->hw_ssp_ctrl0_reg); + + writel(SSP_CTRL0_BUS_WIDTH_ONE_BIT, &ssp_regs->hw_ssp_ctrl0); + + reg = SSP_CTRL1_SSP_MODE_SPI | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS; + reg |= (mxs_slave->mode & SPI_CPOL) ? SSP_CTRL1_POLARITY : 0; + reg |= (mxs_slave->mode & SPI_CPHA) ? SSP_CTRL1_PHASE : 0; + writel(reg, &ssp_regs->hw_ssp_ctrl1); + + writel(0, &ssp_regs->hw_ssp_cmd0); + + mx28_set_ssp_busclock(slave->bus, mxs_slave->max_khz); + + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ +} + +static void mxs_spi_start_xfer(struct mx28_ssp_regs *ssp_regs) +{ + writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_set); + writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_clr); +} + +static void mxs_spi_end_xfer(struct mx28_ssp_regs *ssp_regs) +{ + writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_clr); + writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_set); +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) +{ + struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave); + struct mx28_ssp_regs *ssp_regs = mxs_slave->regs; + int len = bitlen / 8; + const char *tx = dout; + char *rx = din; + + if (bitlen == 0) + return 0; + + if (!rx && !tx) + return 0; + + if (flags & SPI_XFER_BEGIN) + mxs_spi_start_xfer(ssp_regs); + + while (len--) { + /* We transfer 1 byte */ + writel(1, &ssp_regs->hw_ssp_xfer_size); + + if ((flags & SPI_XFER_END) && !len) + mxs_spi_end_xfer(ssp_regs); + + if (tx) + writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_clr); + else + writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_set); + + writel(SSP_CTRL0_RUN, &ssp_regs->hw_ssp_ctrl0_set); + + if (mx28_wait_mask_set(&ssp_regs->hw_ssp_ctrl0_reg, + SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) { + printf("MXS SPI: Timeout waiting for start\n"); + return -1; + } + + if (tx) + writel(*tx++, &ssp_regs->hw_ssp_data); + + writel(SSP_CTRL0_DATA_XFER, &ssp_regs->hw_ssp_ctrl0_set); + + if (rx) { + if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_status_reg, + SSP_STATUS_FIFO_EMPTY, MXS_SPI_MAX_TIMEOUT)) { + printf("MXS SPI: Timeout waiting for data\n"); + return -1; + } + + *rx = readl(&ssp_regs->hw_ssp_data); + rx++; + } + + if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_ctrl0_reg, + SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) { + printf("MXS SPI: Timeout waiting for finish\n"); + return -1; + } + } + + return 0; +} diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 51b249432..09abb754d 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -41,6 +41,7 @@ else COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o endif COBJS-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o +COBJS-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o COBJS-$(CONFIG_USB_EHCI_KIRKWOOD) += ehci-kirkwood.o diff --git a/drivers/usb/host/ehci-mxs.c b/drivers/usb/host/ehci-mxs.c new file mode 100644 index 000000000..c795f23bd --- /dev/null +++ b/drivers/usb/host/ehci-mxs.c @@ -0,0 +1,154 @@ +/* + * Freescale i.MX28 USB Host driver + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/regs-common.h> +#include <asm/arch/regs-base.h> +#include <asm/arch/regs-clkctrl.h> +#include <asm/arch/regs-usb.h> +#include <asm/arch/regs-usbphy.h> + +#include "ehci-core.h" +#include "ehci.h" + +#if (CONFIG_EHCI_MXS_PORT != 0) && (CONFIG_EHCI_MXS_PORT != 1) +#error "MXS EHCI: Invalid port selected!" +#endif + +#ifndef CONFIG_EHCI_MXS_PORT +#error "MXS EHCI: Please define correct port using CONFIG_EHCI_MXS_PORT!" +#endif + +static struct ehci_mxs { + struct mx28_usb_regs *usb_regs; + struct mx28_usbphy_regs *phy_regs; +} ehci_mxs; + +int mxs_ehci_get_port(struct ehci_mxs *mxs_usb, int port) +{ + uint32_t usb_base, phy_base; + switch (port) { + case 0: + usb_base = MXS_USBCTRL0_BASE; + phy_base = MXS_USBPHY0_BASE; + break; + case 1: + usb_base = MXS_USBCTRL1_BASE; + phy_base = MXS_USBPHY1_BASE; + break; + default: + printf("CONFIG_EHCI_MXS_PORT (port = %d)\n", port); + return -1; + } + + mxs_usb->usb_regs = (struct mx28_usb_regs *)usb_base; + mxs_usb->phy_regs = (struct mx28_usbphy_regs *)phy_base; + return 0; +} + +/* This DIGCTL register ungates clock to USB */ +#define HW_DIGCTL_CTRL 0x8001c000 +#define HW_DIGCTL_CTRL_USB0_CLKGATE (1 << 2) +#define HW_DIGCTL_CTRL_USB1_CLKGATE (1 << 16) + +int ehci_hcd_init(void) +{ + + int ret; + uint32_t usb_base, cap_base; + struct mx28_register *digctl_ctrl = + (struct mx28_register *)HW_DIGCTL_CTRL; + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + + ret = mxs_ehci_get_port(&ehci_mxs, CONFIG_EHCI_MXS_PORT); + if (ret) + return ret; + + /* Reset the PHY block */ + writel(USBPHY_CTRL_SFTRST, &ehci_mxs.phy_regs->hw_usbphy_ctrl_set); + udelay(10); + writel(USBPHY_CTRL_SFTRST | USBPHY_CTRL_CLKGATE, + &ehci_mxs.phy_regs->hw_usbphy_ctrl_clr); + + /* Enable USB clock */ + writel(CLKCTRL_PLL0CTRL0_EN_USB_CLKS | CLKCTRL_PLL0CTRL0_POWER, + &clkctrl_regs->hw_clkctrl_pll0ctrl0_set); + writel(CLKCTRL_PLL1CTRL0_EN_USB_CLKS | CLKCTRL_PLL1CTRL0_POWER, + &clkctrl_regs->hw_clkctrl_pll1ctrl0_set); + + writel(HW_DIGCTL_CTRL_USB0_CLKGATE | HW_DIGCTL_CTRL_USB1_CLKGATE, + &digctl_ctrl->reg_clr); + + /* Start USB PHY */ + writel(0, &ehci_mxs.phy_regs->hw_usbphy_pwd); + + /* Enable UTMI+ Level 2 and Level 3 compatibility */ + writel(USBPHY_CTRL_ENUTMILEVEL3 | USBPHY_CTRL_ENUTMILEVEL2 | 1, + &ehci_mxs.phy_regs->hw_usbphy_ctrl_set); + + usb_base = ((uint32_t)ehci_mxs.usb_regs) + 0x100; + hccr = (struct ehci_hccr *)usb_base; + + cap_base = ehci_readl(&hccr->cr_capbase); + hcor = (struct ehci_hcor *)(usb_base + HC_LENGTH(cap_base)); + + return 0; +} + +int ehci_hcd_stop(void) +{ + int ret; + uint32_t tmp; + struct mx28_register *digctl_ctrl = + (struct mx28_register *)HW_DIGCTL_CTRL; + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + + ret = mxs_ehci_get_port(&ehci_mxs, CONFIG_EHCI_MXS_PORT); + if (ret) + return ret; + + /* Stop the USB port */ + tmp = ehci_readl(&hcor->or_usbcmd); + tmp &= ~CMD_RUN; + ehci_writel(tmp, &hcor->or_usbcmd); + + /* Disable the PHY */ + tmp = USBPHY_PWD_RXPWDRX | USBPHY_PWD_RXPWDDIFF | + USBPHY_PWD_RXPWD1PT1 | USBPHY_PWD_RXPWDENV | + USBPHY_PWD_TXPWDV2I | USBPHY_PWD_TXPWDIBIAS | + USBPHY_PWD_TXPWDFS; + writel(tmp, &ehci_mxs.phy_regs->hw_usbphy_pwd); + + /* Disable USB clock */ + writel(CLKCTRL_PLL0CTRL0_EN_USB_CLKS, + &clkctrl_regs->hw_clkctrl_pll0ctrl0_clr); + writel(CLKCTRL_PLL1CTRL0_EN_USB_CLKS, + &clkctrl_regs->hw_clkctrl_pll1ctrl0_clr); + + /* Gate off the USB clock */ + writel(HW_DIGCTL_CTRL_USB0_CLKGATE | HW_DIGCTL_CTRL_USB1_CLKGATE, + &digctl_ctrl->reg_set); + + return 0; +} diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 8b8113df5..a370c150b 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -29,6 +29,9 @@ #ifndef __CONFIG_H #define __CONFIG_H + +#define MACH_TYPE_MPL_VCMA9 227 + /* * High Level Configuration Options * (easy to change) @@ -37,6 +40,7 @@ #define CONFIG_S3C24X0 /* in a SAMSUNG S3C24x0-type SoC */ #define CONFIG_S3C2410 /* specifically a SAMSUNG S3C2410 SoC */ #define CONFIG_VCMA9 /* on a MPL VCMA9 Board */ +#define CONFIG_MACH_TYPE MACH_TYPE_MPL_VCMA9 /* Machine type */ #define CONFIG_SYS_TEXT_BASE 0x0 diff --git a/include/configs/csb226.h b/include/configs/csb226.h deleted file mode 100644 index 804469bf8..000000000 --- a/include/configs/csb226.h +++ /dev/null @@ -1,506 +0,0 @@ -/* - * (C) Copyright 2000, 2001, 2002 - * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de. - * - * Configuration for the Cogent CSB226 board. For details see - * http://www.cogcomp.com/csb_csb226.htm - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * include/configs/csb226.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define DEBUG 1 - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ -#define CONFIG_CSB226 1 /* on a CSB226 board */ - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - /* for timer/console/ethernet */ - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF -#define CONFIG_SYS_TEXT_BASE 0x0 -/* - * Hardware drivers - */ - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 /* we use FFUART on CSB226 */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 19200 -#undef CONFIG_MISC_INIT_R /* not used yet */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_IMI -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_RUN -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_CACHE - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "console=ttyS0,19200 ip=192.168.1.10,192.168.1.5,,255,255,255,0,csb root=/dev/nfs, ether=0,0x08000000,eth0" -#define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.1.56 -#define CONFIG_SERVERIP 192.168.1.5 -#define CONFIG_BOOTCOMMAND "bootm 0x40000" -#define CONFIG_SHOW_BOOT_PROGRESS - -#define CONFIG_CMDLINE_TAG 1 - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ - -/* - * Size of malloc() pool; this lives below the uppermost 128 KiB which are - * used for the RAM copy of the uboot code - * - */ -#define CONFIG_SYS_MALLOC_LEN (128*1024) - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 128 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */ - /* RS: where is this documented? */ - /* RS: is this where U-Boot is */ - /* RS: relocated to in RAM? */ - -#define CONFIG_SYS_HZ 1000 - /* RS: the oscillator is actually 3680130?? */ -#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ - /* 0101000001 */ - /* ^^^^^ Memory Speed 99.53 MHz */ - /* ^^ Run Mode Speed = 2x Mem Speed */ - /* ^^ Turbo Mode Sp. = 1x Run M. Sp. */ - -#define CONFIG_SYS_MONITOR_LEN 0x1c000 /* 112 KiB */ - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* - * Network chip - */ -#define CONFIG_CS8900 -#define CONFIG_CS8900_BUS32 -#define CONFIG_CS8900_BASE 0x08000000 - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* RAM starts here */ -#define CONFIG_SYS_DRAM_SIZE 0x02000000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) - -# if 0 -/* FIXME: switch to _documented_ registers */ -/* - * GPIO settings - * - * GP15 == nCS1 is 1 - * GP24 == SFRM is 1 - * GP25 == TXD is 1 - * GP33 == nCS5 is 1 - * GP39 == FFTXD is 1 - * GP41 == RTS is 1 - * GP47 == TXD is 1 - * GP49 == nPWE is 1 - * GP62 == LED_B is 1 - * GP63 == TDM_OE is 1 - * GP78 == nCS2 is 1 - * GP79 == nCS3 is 1 - * GP80 == nCS4 is 1 - */ -#define CONFIG_SYS_GPSR0_VAL 0x03008000 -#define CONFIG_SYS_GPSR1_VAL 0xC0028282 -#define CONFIG_SYS_GPSR2_VAL 0x0001C000 - -/* GP02 == DON_RST is 0 - * GP23 == SCLK is 0 - * GP45 == USB_ACT is 0 - * GP60 == PLLEN is 0 - * GP61 == LED_A is 0 - * GP73 == SWUPD_LED is 0 - */ -#define CONFIG_SYS_GPCR0_VAL 0x00800004 -#define CONFIG_SYS_GPCR1_VAL 0x30002000 -#define CONFIG_SYS_GPCR2_VAL 0x00000100 - -/* GP00 == DON_READY is input - * GP01 == DON_OK is input - * GP02 == DON_RST is output - * GP03 == RESET_IND is input - * GP07 == RES11 is input - * GP09 == RES12 is input - * GP11 == SWUPDATE is input - * GP14 == nPOWEROK is input - * GP15 == nCS1 is output - * GP17 == RES22 is input - * GP18 == RDY is input - * GP23 == SCLK is output - * GP24 == SFRM is output - * GP25 == TXD is output - * GP26 == RXD is input - * GP32 == RES21 is input - * GP33 == nCS5 is output - * GP34 == FFRXD is input - * GP35 == CTS is input - * GP39 == FFTXD is output - * GP41 == RTS is output - * GP42 == USB_OK is input - * GP45 == USB_ACT is output - * GP46 == RXD is input - * GP47 == TXD is output - * GP49 == nPWE is output - * GP58 == nCPUBUSINT is input - * GP59 == LANINT is input - * GP60 == PLLEN is output - * GP61 == LED_A is output - * GP62 == LED_B is output - * GP63 == TDM_OE is output - * GP64 == nDSPINT is input - * GP65 == STRAP0 is input - * GP67 == STRAP1 is input - * GP69 == STRAP2 is input - * GP70 == STRAP3 is input - * GP71 == STRAP4 is input - * GP73 == SWUPD_LED is output - * GP78 == nCS2 is output - * GP79 == nCS3 is output - * GP80 == nCS4 is output - */ -#define CONFIG_SYS_GPDR0_VAL 0x03808004 -#define CONFIG_SYS_GPDR1_VAL 0xF002A282 -#define CONFIG_SYS_GPDR2_VAL 0x0001C200 - -/* GP15 == nCS1 is AF10 - * GP18 == RDY is AF01 - * GP23 == SCLK is AF10 - * GP24 == SFRM is AF10 - * GP25 == TXD is AF10 - * GP26 == RXD is AF01 - * GP33 == nCS5 is AF10 - * GP34 == FFRXD is AF01 - * GP35 == CTS is AF01 - * GP39 == FFTXD is AF10 - * GP41 == RTS is AF10 - * GP46 == RXD is AF10 - * GP47 == TXD is AF01 - * GP49 == nPWE is AF10 - * GP78 == nCS2 is AF10 - * GP79 == nCS3 is AF10 - * GP80 == nCS4 is AF10 - */ -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 -#define CONFIG_SYS_GAFR0_U_VAL 0x001A8010 -#define CONFIG_SYS_GAFR1_L_VAL 0x60088058 -#define CONFIG_SYS_GAFR1_U_VAL 0x00000008 -#define CONFIG_SYS_GAFR2_L_VAL 0xA0000000 -#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 - - -/* FIXME: set GPIO_RER/FER */ - -/* RDH = 1 - * PH = 1 - * VFS = 1 - * BFS = 1 - * SSS = 1 - */ -#define CONFIG_SYS_PSSR_VAL 0x37 - -/* - * Memory settings - * - * This is the configuration for nCS0/1 -> flash banks - * configuration for nCS1: - * [31] 0 - Slower Device - * [30:28] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns - * [27:24] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns - * [23:20] 1011 - " for first access: (11+2)*MemClk = 130 ns - * [19] 1 - 16 Bit bus width - * [18:16] 000 - nonburst RAM or FLASH - * configuration for nCS0: - * [15] 0 - Slower Device - * [14:12] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns - * [11:08] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns - * [07:04] 1011 - " for first access: (11+2)*MemClk = 130 ns - * [03] 1 - 16 Bit bus width - * [02:00] 000 - nonburst RAM or FLASH - */ -#define CONFIG_SYS_MSC0_VAL 0x25b825b8 /* flash banks */ - -/* This is the configuration for nCS2/3 -> TDM-Switch, DSP - * configuration for nCS3: DSP - * [31] 0 - Slower Device - * [30:28] 001 - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns - * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns - * [23:20] 0011 - RDF3: Address for first access: (3+1)*MemClk = 40 ns - * [19] 1 - 16 Bit bus width - * [18:16] 100 - variable latency I/O - * configuration for nCS2: TDM-Switch - * [15] 0 - Slower Device - * [14:12] 101 - RRR2: CS deselect to CS time: 5*(2*MemClk) = 100 ns - * [11:08] 1001 - RDN2: Address to data valid in bursts: (9+1)*MemClk = 100 ns - * [07:04] 0011 - RDF2: Address for first access: (3+1)*MemClk = 40 ns - * [03] 1 - 16 Bit bus width - * [02:00] 100 - variable latency I/O - */ -#define CONFIG_SYS_MSC1_VAL 0x123C593C /* TDM switch, DSP */ - -/* This is the configuration for nCS4/5 -> ExtBus, LAN Controller - * - * configuration for nCS5: LAN Controller - * [31] 0 - Slower Device - * [30:28] 001 - RRR5: CS deselect to CS time: 1*(2*MemClk) = 20 ns - * [27:24] 0010 - RDN5: Address to data valid in bursts: (2+1)*MemClk = 30 ns - * [23:20] 0011 - RDF5: Address for first access: (3+1)*MemClk = 40 ns - * [19] 1 - 16 Bit bus width - * [18:16] 100 - variable latency I/O - * configuration for nCS4: ExtBus - * [15] 0 - Slower Device - * [14:12] 110 - RRR4: CS deselect to CS time: 6*(2*MemClk) = 120 ns - * [11:08] 1100 - RDN4: Address to data valid in bursts: (12+1)*MemClk = 130 ns - * [07:04] 1101 - RDF4: Address for first access: 13->(15+1)*MemClk = 160 ns - * [03] 1 - 16 Bit bus width - * [02:00] 100 - variable latency I/O - */ -#define CONFIG_SYS_MSC2_VAL 0x123C6CDC /* extra bus, LAN controller */ - -/* MDCNFG: SDRAM Configuration Register - * - * [31:29] 000 - reserved - * [28] 0 - no SA1111 compatiblity mode - * [27] 0 - latch return data with return clock - * [26] 0 - alternate addressing for pair 2/3 - * [25:24] 00 - timings - * [23] 0 - internal banks in lower partition 2/3 (not used) - * [22:21] 00 - row address bits for partition 2/3 (not used) - * [20:19] 00 - column address bits for partition 2/3 (not used) - * [18] 0 - SDRAM partition 2/3 width is 32 bit - * [17] 0 - SDRAM partition 3 disabled - * [16] 0 - SDRAM partition 2 disabled - * [15:13] 000 - reserved - * [12] 1 - SA1111 compatiblity mode - * [11] 1 - latch return data with return clock - * [10] 0 - no alternate addressing for pair 0/1 - * [09:08] 01 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk - * [7] 1 - 4 internal banks in lower partition pair - * [06:05] 10 - 13 row address bits for partition 0/1 - * [04:03] 01 - 9 column address bits for partition 0/1 - * [02] 0 - SDRAM partition 0/1 width is 32 bit - * [01] 0 - disable SDRAM partition 1 - * [00] 1 - enable SDRAM partition 0 - */ -/* use the configuration above but disable partition 0 */ -#define CONFIG_SYS_MDCNFG_VAL 0x000019c8 - -/* MDREFR: SDRAM Refresh Control Register - * - * [32:26] 0 - reserved - * [25] 0 - K2FREE: not free running - * [24] 0 - K1FREE: not free running - * [23] 1 - K0FREE: not free running - * [22] 0 - SLFRSH: self refresh disabled - * [21] 0 - reserved - * [20] 0 - APD: no auto power down - * [19] 0 - K2DB2: SDCLK2 is MemClk - * [18] 0 - K2RUN: disable SDCLK2 - * [17] 0 - K1DB2: SDCLK1 is MemClk - * [16] 1 - K1RUN: enable SDCLK1 - * [15] 1 - E1PIN: SDRAM clock enable - * [14] 1 - K0DB2: SDCLK0 is MemClk - * [13] 0 - K0RUN: disable SDCLK0 - * [12] 1 - E0PIN: disable SDCKE0 - * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24 - */ -#define CONFIG_SYS_MDREFR_VAL 0x0081D018 - -/* MDMRS: Mode Register Set Configuration Register - * - * [31] 0 - reserved - * [30:23] 00000000- MDMRS2: SDRAM2/3 MRS Value. (not used) - * [22:20] 000 - MDCL2: SDRAM2/3 Cas Latency. (not used) - * [19] 0 - MDADD2: SDRAM2/3 burst Type. Fixed to sequential. (not used) - * [18:16] 010 - MDBL2: SDRAM2/3 burst Length. Fixed to 4. (not used) - * [15] 0 - reserved - * [14:07] 00000000- MDMRS0: SDRAM0/1 MRS Value. - * [06:04] 010 - MDCL0: SDRAM0/1 Cas Latency. - * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential. - * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4. - */ -#define CONFIG_SYS_MDMRS_VAL 0x00020022 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00000000 -#define CONFIG_SYS_MCMEM1_VAL 0x00000000 -#define CONFIG_SYS_MCATT0_VAL 0x00000000 -#define CONFIG_SYS_MCATT1_VAL 0x00000000 -#define CONFIG_SYS_MCIO0_VAL 0x00000000 -#define CONFIG_SYS_MCIO1_VAL 0x00000000 -#endif - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPSR0_VAL 0xFFFFFFFF -#define CONFIG_SYS_GPSR1_VAL 0xFFFFFFFF -#define CONFIG_SYS_GPSR2_VAL 0xFFFFFFFF -#define CONFIG_SYS_GPCR0_VAL 0x08022080 -#define CONFIG_SYS_GPCR1_VAL 0x00000000 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 -#define CONFIG_SYS_GPDR0_VAL 0xCD82A878 -#define CONFIG_SYS_GPDR1_VAL 0xFCFFAB80 -#define CONFIG_SYS_GPDR2_VAL 0x0001FFFF -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 -#define CONFIG_SYS_GAFR0_U_VAL 0xA5254010 -#define CONFIG_SYS_GAFR1_L_VAL 0x599A9550 -#define CONFIG_SYS_GAFR1_U_VAL 0xAAA5AAAA -#define CONFIG_SYS_GAFR2_L_VAL 0xAAAAAAAA -#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 - -/* FIXME: set GPIO_RER/FER */ - -#define CONFIG_SYS_PSSR_VAL 0x20 - -#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 -#define CONFIG_SYS_CKEN 0x0 - -/* - * Memory settings - */ - -#define CONFIG_SYS_MSC0_VAL 0x2ef15af0 -#define CONFIG_SYS_MSC1_VAL 0x00003ff4 -#define CONFIG_SYS_MSC2_VAL 0x7ff07ff0 -#define CONFIG_SYS_MDCNFG_VAL 0x09a909a9 -#define CONFIG_SYS_MDREFR_VAL 0x038ff030 -#define CONFIG_SYS_MDMRS_VAL 0x00220022 -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00000000 -#define CONFIG_SYS_MCMEM1_VAL 0x00000000 -#define CONFIG_SYS_MCATT0_VAL 0x00000000 -#define CONFIG_SYS_MCATT1_VAL 0x00000000 -#define CONFIG_SYS_MCIO0_VAL 0x00000000 -#define CONFIG_SYS_MCIO1_VAL 0x00000000 - -#define CSB226_USER_LED0 0x00000008 -#define CSB226_USER_LED1 0x00000010 -#define CSB226_USER_LED2 0x00000020 - - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sect. on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) - /* Addr of Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/da850_am18xxevm.h b/include/configs/da850_am18xxevm.h new file mode 100644 index 000000000..92b83ff8d --- /dev/null +++ b/include/configs/da850_am18xxevm.h @@ -0,0 +1,245 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * Based on davinci_dvevm.h. Original Copyrights follow: + * + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * Board + */ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_USE_SPIFLASH + + +/* + * SoC Configuration + */ +#define CONFIG_MACH_DAVINCI_DA850_EVM +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ +#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) +#define CONFIG_SYS_OSCIN_FREQ 24000000 +#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE +#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_TEXT_BASE 0xc1080000 + +/* + * Memory Info + */ +#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ +#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ +#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ +#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ + +/* memtest start addr */ +#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) + +/* memtest will be run on 16MB */ +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) + +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ + +/* + * Serial Driver info + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ +#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ +#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_DAVINCI_SPI +#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE +#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED + +/* + * I2C Configuration + */ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CONFIG_SYS_I2C_SPEED 25000 +#define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +#define CONFIG_SYS_I2C_EXPANDER_ADDR 0x20 + +/* + * Flash & Environment + */ +#ifdef CONFIG_USE_NAND +#undef CONFIG_ENV_IS_IN_FLASH +#define CONFIG_NAND_DAVINCI +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ +#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ +#define CONFIG_ENV_SIZE (128 << 10) +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST +#define CONFIG_SYS_NAND_PAGE_2K +#define CONFIG_SYS_NAND_CS 3 +#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE +#define CONFIG_SYS_CLE_MASK 0x10 +#define CONFIG_SYS_ALE_MASK 0x8 +#undef CONFIG_SYS_NAND_HW_ECC +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#endif + +/* + * Network & Ethernet Configuration + */ +#ifdef CONFIG_DRIVER_TI_EMAC +#define CONFIG_EMAC_MDIO_PHY_NUM 0 +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI +#endif + +#ifdef CONFIG_USE_NOR +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ +#define CONFIG_SYS_FLASH_SECT_SZ (128 << 10) /* 128KB */ +#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ * 3) +#define CONFIG_ENV_SIZE (10 << 10) /* 10KB */ +#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE +#define PHYS_FLASH_SIZE (8 << 20) /* Flash size 8MB */ +#define CONFIG_SYS_MAX_FLASH_SECT ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)\ + + 3) +#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ +#endif + +#ifdef CONFIG_USE_SPIFLASH +#undef CONFIG_ENV_IS_IN_FLASH +#undef CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE (64 << 10) +#define CONFIG_ENV_OFFSET (256 << 10) +#define CONFIG_ENV_SECT_SIZE (64 << 10) +#define CONFIG_SYS_NO_FLASH +#endif + +/* + * U-Boot general configuration + */ +#define CONFIG_MISC_INIT_R +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CONFIG_SYS_PROMPT "U-Boot > " /* Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ +#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC + +/* + * Linux Information + */ +#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) +#define CONFIG_HWCONFIG /* enable hwconfig */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS \ + "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp" +#define CONFIG_BOOTDELAY 3 +#define CONFIG_EXTRA_ENV_SETTINGS "hwconfig=dsp:wake=yes" + +/* + * U-Boot commands + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ENV +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_MEMORY + +#ifndef CONFIG_DRIVER_TI_EMAC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_PING +#endif + +#ifdef CONFIG_USE_NAND +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND + +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_LZO +#define CONFIG_RBTREE +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#endif + +#ifdef CONFIG_USE_SPIFLASH +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_FLASH +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF +#define CONFIG_CMD_SAVEENV +#endif + +#if !defined(CONFIG_USE_NAND) && \ + !defined(CONFIG_USE_NOR) && \ + !defined(CONFIG_USE_SPIFLASH) +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_SIZE (16 << 10) +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_ENV +#endif + +/* additions for new relocation code, must added to all boards */ +#define CONFIG_SYS_SDRAM_BASE 0xc0000000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ + /* Fix this */ GENERATED_GBL_DATA_SIZE) +#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dm6467Tevm.h b/include/configs/davinci_dm6467Tevm.h new file mode 100644 index 000000000..f7c994eba --- /dev/null +++ b/include/configs/davinci_dm6467Tevm.h @@ -0,0 +1,163 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* Spectrum Digital TMS320DM6467T EVM board */ +#define DAVINCI_DM6467EVM +#define DAVINCI_DM6467TEVM +#define CONFIG_SYS_USE_NAND +#define CONFIG_SYS_NAND_SMALLPAGE + +#define CONFIG_SKIP_LOWLEVEL_INIT + +/* SoC Configuration */ +#define CONFIG_ARM926EJS /* arm926ejs CPU */ + +/* Clock rates detection */ +#ifndef __ASSEMBLY__ +extern unsigned int davinci_arm_clk_get(void); +#endif + +#define CFG_REFCLK_FREQ 33000000 +/* Arm Clock frequency */ +#define CONFIG_SYS_CLK_FREQ davinci_arm_clk_get() +/* Timer Input clock freq */ +#define CONFIG_SYS_HZ_CLOCK (CONFIG_SYS_CLK_FREQ/2) +#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SOC_DM646X + +/* EEPROM definitions for EEPROM */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 + +/* Memory Info */ +#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ +#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE (256 << 20) /* DDR size 256MB */ + +/* Linux interfacing */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_SYS_BARGSIZE 1024 /* Bootarg Size */ +#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */ +#define CONFIG_REVISION_TAG + +/* Serial Driver info */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 4 +#define CONFIG_SYS_NS16550_COM1 0x01c20000 +#define CONFIG_SYS_NS16550_CLK 24000000 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* I2C Configuration */ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CONFIG_SYS_I2C_SPEED 80000 +#define CONFIG_SYS_I2C_SLAVE 10 + +/* Network & Ethernet Configuration */ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_EMAC_MDIO_PHY_NUM 1 +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_CMD_NET + +/* Flash & Environment */ +#define CONFIG_SYS_NO_FLASH +#ifdef CONFIG_SYS_USE_NAND +#define CONFIG_NAND_DAVINCI +#define CONFIG_SYS_NAND_CS 2 +#undef CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ +#define CONFIG_SYS_NAND_BASE_LIST {0x42000000, } +#define CONFIG_SYS_NAND_HW_ECC +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_ENV_OFFSET 0 +#else +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE (4 << 10) /* 4 KiB */ +#endif + +/* U-Boot general configuration */ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CONFIG_SYS_PROMPT "DM6467 EVM > " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +#define CONFIG_BOOTCOMMAND "source 0x82080000; dhcp; bootm" +#define CONFIG_BOOTARGS \ + "mem=120M console=ttyS0,115200n8 " \ + "root=/dev/hda1 rw noinitrd ip=dhcp" + +/* U-Boot commands */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#ifdef CONFIG_SYS_USE_NAND +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND +#endif + +#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index ec1c31c08..c9a0cd1da 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -65,6 +65,7 @@ extern unsigned int davinci_arm_clk_get(void); #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_SYS_BARGSIZE 1024 /* Bootarg Size */ #define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */ +#define CONFIG_REVISION_TAG /* Serial Driver info */ #define CONFIG_SYS_NS16550 diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 6c51a2747..e1743dc5e 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -337,6 +337,7 @@ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* NAND boot config */ +#define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 #define CONFIG_SYS_NAND_OOBSIZE 64 diff --git a/include/configs/innokom.h b/include/configs/innokom.h deleted file mode 100644 index a0a3da1e8..000000000 --- a/include/configs/innokom.h +++ /dev/null @@ -1,507 +0,0 @@ -/* - * (C) Copyright 2000, 2001, 2002 - * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de. - * - * Configuration for the Auerswald Innokom CPU board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * include/configs/innokom.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ -#define CONFIG_INNOKOM 1 /* on an Auerswald Innokom board */ - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - /* for timer/console/ethernet */ - -#define CONFIG_SYS_TEXT_BASE 0x0 - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -/* - * Hardware drivers - */ - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 /* we use FFUART on CSB226 */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 19200 -#define CONFIG_MISC_INIT_R 1 /* we have a misc_init_r() function */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BDI -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IMI -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_RUN - - -#define CONFIG_BOOTDELAY 3 -/* #define CONFIG_BOOTARGS "root=/dev/nfs ip=bootp console=ttyS0,19200" */ -#define CONFIG_BOOTARGS "console=ttyS0,19200" -#define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.1.56 -#define CONFIG_SERVERIP 192.168.1.2 -#define CONFIG_BOOTCOMMAND "bootm 0x40000" -#define CONFIG_SHOW_BOOT_PROGRESS - -#define CONFIG_CMDLINE_TAG 1 - -/* - * Miscellaneous configurable options - */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (256*1024) - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* load kernel to this address */ - -#define CONFIG_SYS_HZ 1000 - /* RS: the oscillator is actually 3680130?? */ - -#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ - /* 0101000001 */ - /* ^^^^^ Memory Speed 99.53 MHz */ - /* ^^ Run Mode Speed = 2x Mem Speed */ - /* ^^ Turbo Mode Sp. = 1x Run M. Sp. */ - -#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128 KiB */ - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* - * I2C bus - */ -#define CONFIG_I2C_MV 1 -#define CONFIG_MV_I2C_REG 0x40301680 -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0xfe - -#define CONFIG_ENV_IS_IN_EEPROM 1 - -#define CONFIG_ENV_OFFSET 0x00 /* environment starts here */ -#define CONFIG_ENV_SIZE 1024 /* 1 KiB */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* A0 = 0 (hardwired) */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15 /* between stop and start */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* length of address */ -#define CONFIG_SYS_EEPROM_SIZE 4096 /* size in bytes */ -#define CONFIG_SYS_I2C_INIT_BOARD 1 /* board has it's own init */ - -/* - * SMSC91C111 Network Card - */ -#define CONFIG_SMC91111 1 -#define CONFIG_SMC91111_BASE 0x14000000 /* chip select 5 */ -#undef CONFIG_SMC_USE_32_BIT /* 16 bit bus access */ -#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */ -#define CONFIG_SMC_AUTONEG_TIMEOUT 10 /* timeout 10 seconds */ -#undef CONFIG_SHOW_ACTIVITY -#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* RAM starts here */ -#define CONFIG_SYS_DRAM_SIZE 0x04000000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) - -/* - * JFFS2 partitions - * - */ -/* development flash */ -#define CONFIG_MTD_INNOKOM_16MB 1 -#undef CONFIG_MTD_INNOKOM_64MB - -/* production flash */ -/* -#define CONFIG_MTD_INNOKOM_64MB 1 -#undef CONFIG_MTD_INNOKOM_16MB -*/ - -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=innokom-0" -*/ - -/* development flash */ -/* -#define MTDPARTS_DEFAULT "mtdparts=innokom-0:256k(uboot),768k(kernel),8m(user),7m(data)" -*/ - -/* production flash */ -/* -#define MTDPARTS_DEFAULT "mtdparts=innokom-0:256k(uboot),768k(kernel),16256k(user1),16256k(user2),32m(data)" -*/ - -/* - * GPIO settings - * - * GP15 == nCS1 is 1 - * GP24 == SFRM is 1 - * GP25 == TXD is 1 - * GP33 == nCS5 is 1 - * GP39 == FFTXD is 1 - * GP41 == RTS is 1 - * GP47 == TXD is 1 - * GP49 == nPWE is 1 - * GP62 == LED_B is 1 - * GP63 == TDM_OE is 1 - * GP78 == nCS2 is 1 - * GP79 == nCS3 is 1 - * GP80 == nCS4 is 1 - */ -#define CONFIG_SYS_GPSR0_VAL 0x03008000 -#define CONFIG_SYS_GPSR1_VAL 0xC0028282 -#define CONFIG_SYS_GPSR2_VAL 0x0001C000 - -/* GP02 == DON_RST is 0 - * GP23 == SCLK is 0 - * GP45 == USB_ACT is 0 - * GP60 == PLLEN is 0 - * GP61 == LED_A is 0 - * GP73 == SWUPD_LED is 0 - */ -#define CONFIG_SYS_GPCR0_VAL 0x00800004 -#define CONFIG_SYS_GPCR1_VAL 0x30002000 -#define CONFIG_SYS_GPCR2_VAL 0x00000100 - -/* GP00 == DON_READY is input - * GP01 == DON_OK is input - * GP02 == DON_RST is output - * GP03 == RESET_IND is input - * GP07 == RES11 is input - * GP09 == RES12 is input - * GP11 == SWUPDATE is input - * GP14 == nPOWEROK is input - * GP15 == nCS1 is output - * GP17 == RES22 is input - * GP18 == RDY is input - * GP23 == SCLK is output - * GP24 == SFRM is output - * GP25 == TXD is output - * GP26 == RXD is input - * GP32 == RES21 is input - * GP33 == nCS5 is output - * GP34 == FFRXD is input - * GP35 == CTS is input - * GP39 == FFTXD is output - * GP41 == RTS is output - * GP42 == USB_OK is input - * GP45 == USB_ACT is output - * GP46 == RXD is input - * GP47 == TXD is output - * GP49 == nPWE is output - * GP58 == nCPUBUSINT is input - * GP59 == LANINT is input - * GP60 == PLLEN is output - * GP61 == LED_A is output - * GP62 == LED_B is output - * GP63 == TDM_OE is output - * GP64 == nDSPINT is input - * GP65 == STRAP0 is input - * GP67 == STRAP1 is input - * GP69 == STRAP2 is input - * GP70 == STRAP3 is input - * GP71 == STRAP4 is input - * GP73 == SWUPD_LED is output - * GP78 == nCS2 is output - * GP79 == nCS3 is output - * GP80 == nCS4 is output - */ -#define CONFIG_SYS_GPDR0_VAL 0x03808004 -#define CONFIG_SYS_GPDR1_VAL 0xF002A282 -#define CONFIG_SYS_GPDR2_VAL 0x0001C200 - -/* GP15 == nCS1 is AF10 - * GP18 == RDY is AF01 - * GP23 == SCLK is AF10 - * GP24 == SFRM is AF10 - * GP25 == TXD is AF10 - * GP26 == RXD is AF01 - * GP33 == nCS5 is AF10 - * GP34 == FFRXD is AF01 - * GP35 == CTS is AF01 - * GP39 == FFTXD is AF10 - * GP41 == RTS is AF10 - * GP46 == RXD is AF10 - * GP47 == TXD is AF01 - * GP49 == nPWE is AF10 - * GP78 == nCS2 is AF10 - * GP79 == nCS3 is AF10 - * GP80 == nCS4 is AF10 - */ -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 -#define CONFIG_SYS_GAFR0_U_VAL 0x001A8010 -#define CONFIG_SYS_GAFR1_L_VAL 0x60088058 -#define CONFIG_SYS_GAFR1_U_VAL 0x00000008 -#define CONFIG_SYS_GAFR2_L_VAL 0xA0000000 -#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 - - -/* FIXME: set GPIO_RER/FER */ - -/* RDH = 1 - * PH = 1 - * VFS = 1 - * BFS = 1 - * SSS = 1 - */ -#define CONFIG_SYS_PSSR_VAL 0x37 - -#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 -#define CONFIG_SYS_CKEN 0x0 - -/* - * Memory settings - * - * This is the configuration for nCS0/1 -> flash banks - * configuration for nCS1: - * [31] 0 - Slower Device - * [30:28] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns - * [27:24] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns - * [23:20] 1011 - " for first access: (11+2)*MemClk = 130 ns - * [19] 1 - 16 Bit bus width - * [18:16] 000 - nonburst RAM or FLASH - * configuration for nCS0: - * [15] 0 - Slower Device - * [14:12] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns - * [11:08] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns - * [07:04] 1011 - " for first access: (11+2)*MemClk = 130 ns - * [03] 1 - 16 Bit bus width - * [02:00] 000 - nonburst RAM or FLASH - */ -#define CONFIG_SYS_MSC0_VAL 0x25b825b8 /* flash banks */ - -/* This is the configuration for nCS2/3 -> TDM-Switch, DSP - * configuration for nCS3: DSP - * [31] 0 - Slower Device - * [30:28] 001 - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns - * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns - * [23:20] 0011 - RDF3: Address for first access: (3+1)*MemClk = 40 ns - * [19] 1 - 16 Bit bus width - * [18:16] 100 - variable latency I/O - * configuration for nCS2: TDM-Switch - * [15] 0 - Slower Device - * [14:12] 101 - RRR2: CS deselect to CS time: 5*(2*MemClk) = 100 ns - * [11:08] 1001 - RDN2: Address to data valid in bursts: (9+1)*MemClk = 100 ns - * [07:04] 0011 - RDF2: Address for first access: (3+1)*MemClk = 40 ns - * [03] 1 - 16 Bit bus width - * [02:00] 100 - variable latency I/O - */ -#define CONFIG_SYS_MSC1_VAL 0x123C593C /* TDM switch, DSP */ - -/* This is the configuration for nCS4/5 -> ExtBus, LAN Controller - * - * configuration for nCS5: LAN Controller - * [31] 0 - Slower Device - * [30:28] 001 - RRR5: CS deselect to CS time: 1*(2*MemClk) = 20 ns - * [27:24] 0010 - RDN5: Address to data valid in bursts: (2+1)*MemClk = 30 ns - * [23:20] 0011 - RDF5: Address for first access: (3+1)*MemClk = 40 ns - * [19] 1 - 16 Bit bus width - * [18:16] 100 - variable latency I/O - * configuration for nCS4: ExtBus - * [15] 0 - Slower Device - * [14:12] 110 - RRR4: CS deselect to CS time: 6*(2*MemClk) = 120 ns - * [11:08] 1100 - RDN4: Address to data valid in bursts: (12+1)*MemClk = 130 ns - * [07:04] 1101 - RDF4: Address for first access: 13->(15+1)*MemClk = 160 ns - * [03] 1 - 16 Bit bus width - * [02:00] 100 - variable latency I/O - */ -#define CONFIG_SYS_MSC2_VAL 0x123C6CDC /* extra bus, LAN controller */ - -/* MDCNFG: SDRAM Configuration Register - * - * [31:29] 000 - reserved - * [28] 0 - no SA1111 compatiblity mode - * [27] 0 - latch return data with return clock - * [26] 0 - alternate addressing for pair 2/3 - * [25:24] 00 - timings - * [23] 0 - internal banks in lower partition 2/3 (not used) - * [22:21] 00 - row address bits for partition 2/3 (not used) - * [20:19] 00 - column address bits for partition 2/3 (not used) - * [18] 0 - SDRAM partition 2/3 width is 32 bit - * [17] 0 - SDRAM partition 3 disabled - * [16] 0 - SDRAM partition 2 disabled - * [15:13] 000 - reserved - * [12] 1 - SA1111 compatiblity mode - * [11] 1 - latch return data with return clock - * [10] 0 - no alternate addressing for pair 0/1 - * [09:08] 01 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk - * [7] 1 - 4 internal banks in lower partition pair - * [06:05] 10 - 13 row address bits for partition 0/1 - * [04:03] 01 - 9 column address bits for partition 0/1 - * [02] 0 - SDRAM partition 0/1 width is 32 bit - * [01] 0 - disable SDRAM partition 1 - * [00] 1 - enable SDRAM partition 0 - */ -/* use the configuration above but disable partition 0 */ -#define CONFIG_SYS_MDCNFG_VAL 0x000019c8 - -/* MDREFR: SDRAM Refresh Control Register - * - * [32:26] 0 - reserved - * [25] 0 - K2FREE: not free running - * [24] 0 - K1FREE: not free running - * [23] 1 - K0FREE: not free running - * [22] 0 - SLFRSH: self refresh disabled - * [21] 0 - reserved - * [20] 0 - APD: no auto power down - * [19] 0 - K2DB2: SDCLK2 is MemClk - * [18] 0 - K2RUN: disable SDCLK2 - * [17] 0 - K1DB2: SDCLK1 is MemClk - * [16] 1 - K1RUN: enable SDCLK1 - * [15] 1 - E1PIN: SDRAM clock enable - * [14] 1 - K0DB2: SDCLK0 is MemClk - * [13] 0 - K0RUN: disable SDCLK0 - * [12] 1 - E0PIN: disable SDCKE0 - * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24 - */ -#define CONFIG_SYS_MDREFR_VAL 0x0081D018 - -/* MDMRS: Mode Register Set Configuration Register - * - * [31] 0 - reserved - * [30:23] 00000000- MDMRS2: SDRAM2/3 MRS Value. (not used) - * [22:20] 000 - MDCL2: SDRAM2/3 Cas Latency. (not used) - * [19] 0 - MDADD2: SDRAM2/3 burst Type. Fixed to sequential. (not used) - * [18:16] 010 - MDBL2: SDRAM2/3 burst Length. Fixed to 4. (not used) - * [15] 0 - reserved - * [14:07] 00000000- MDMRS0: SDRAM0/1 MRS Value. - * [06:04] 010 - MDCL0: SDRAM0/1 Cas Latency. - * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential. - * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4. - */ -#define CONFIG_SYS_MDMRS_VAL 0x00020022 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00000000 -#define CONFIG_SYS_MCMEM1_VAL 0x00000000 -#define CONFIG_SYS_MCATT0_VAL 0x00000000 -#define CONFIG_SYS_MCATT1_VAL 0x00000000 -#define CONFIG_SYS_MCIO0_VAL 0x00000000 -#define CONFIG_SYS_MCIO1_VAL 0x00000000 - -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* -#define CSB226_USER_LED0 0x00000008 -#define CSB226_USER_LED1 0x00000010 -#define CSB226_USER_LED2 0x00000020 -*/ - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sect. on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index 61b87618b..a1fdbb814 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -37,6 +37,7 @@ * High Level Configuration Options * (easy to change) */ +#define CONFIG_SYS_TEXT_BASE 0x01000000 #define CONFIG_SYS_MEMTEST_START 0x100000 #define CONFIG_SYS_MEMTEST_END 0x10000000 #define CONFIG_SYS_HZ 1000 diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index 7ae34b71b..ccbdf44cd 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -37,6 +37,7 @@ * High Level Configuration Options * (easy to change) */ +#define CONFIG_SYS_TEXT_BASE 0x01000000 #define CONFIG_SYS_MEMTEST_START 0x100000 #define CONFIG_SYS_MEMTEST_END 0x10000000 #define CONFIG_SYS_HZ 1000 diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h new file mode 100644 index 000000000..d4bd207d5 --- /dev/null +++ b/include/configs/m28evk.h @@ -0,0 +1,303 @@ +/* + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __M28_H__ +#define __M28_H__ + +#include <asm/arch/regs-base.h> + +/* + * SoC configurations + */ +#define CONFIG_MX28 /* i.MX28 SoC */ +#define CONFIG_MXS_GPIO /* GPIO control */ +#define CONFIG_SYS_HZ 1000 /* Ticks per second */ + +/* + * Define M28EVK machine type by hand until it lands in mach-types + */ +#define MACH_TYPE_M28EVK 3613 + +#define CONFIG_MACH_TYPE MACH_TYPE_M28EVK + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_ARCH_MISC_INIT + +/* + * SPL + */ +#define CONFIG_SPL +#define CONFIG_SPL_NO_CPU_SUPPORT_CODE +#define CONFIG_SPL_START_S_PATH "board/denx/m28evk" +#define CONFIG_SPL_LDSCRIPT "board/denx/m28evk/u-boot-spl.lds" + +/* + * U-Boot Commands + */ +#include <config_cmd_default.h> +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_CMD_USB + +/* + * Memory configurations + */ +#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x40000000 /* Base address */ +#define PHYS_SDRAM_1_SIZE 0x40000000 /* Max 1 GB RAM */ +#define CONFIG_STACKSIZE 0x00010000 /* 128 KB stack */ +#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Initial data */ +#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */ +#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +/* Point initial SP in SRAM so SPL can use it too. */ +#define CONFIG_SYS_INIT_SP_ADDR 0x00002000 +/* + * We need to sacrifice first 4 bytes of RAM here to avoid triggering some + * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot + * binary. In case there was more of this mess, 0x100 bytes are skipped. + */ +#define CONFIG_SYS_TEXT_BASE 0x40000100 + +/* + * U-Boot general configurations + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + /* Print buffer size */ +#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + /* Boot argument buffer size */ +#define CONFIG_VERSION_VARIABLE /* U-BOOT version */ +#define CONFIG_AUTO_COMPLETE /* Command auto complete */ +#define CONFIG_CMDLINE_EDITING /* Command history etc */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* + * Serial Driver + */ +#define CONFIG_PL011_SERIAL +#define CONFIG_PL011_CLOCK 24000000 +#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } +#define CONFIG_CONS_INDEX 0 +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * MMC Driver + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_MXS_MMC +#endif + +/* + * NAND + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_MXS +#define CONFIG_APBH_DMA +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x60000000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define NAND_MAX_CHIPS 8 + +/* Environment is in NAND */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE (16 * 1024) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_RANGE (512 * 1024) +#define CONFIG_ENV_OFFSET 0x300000 +#define CONFIG_ENV_OFFSET_REDUND \ + (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) + +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define MTDIDS_DEFAULT "nand0=gpmi-nand.0" +#define MTDPARTS_DEFAULT \ + "mtdparts=gpmi-nand.0:" \ + "3m(bootloader)ro," \ + "512k(environment)," \ + "512k(redundant-environment)," \ + "4m(kernel)," \ + "-(filesystem)" +#endif + +/* + * Ethernet on SOC (FEC) + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_NET_MULTI +#define CONFIG_ETHPRIME "FEC0" +#define CONFIG_FEC_MXC +#define CONFIG_FEC_MXC_MULTI +#define CONFIG_MII +#define CONFIG_DISCOVER_PHY +#define CONFIG_FEC_XCV_TYPE RMII +#endif + +/* + * I2C + */ +#ifdef CONFIG_CMD_I2C +#define CONFIG_I2C_MXS +#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C_SPEED 400000 +#endif + +/* + * EEPROM + */ +#ifdef CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#endif + +/* + * RTC + */ +#ifdef CONFIG_CMD_DATE +/* Use the internal RTC in the MXS chip */ +#define CONFIG_RTC_INTERNAL +#ifdef CONFIG_RTC_INTERNAL +#define CONFIG_RTC_MXS +#else +#define CONFIG_RTC_M41T62 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CONFIG_SYS_M41T11_BASE_YEAR 2000 +#endif +#endif + +/* + * USB + */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MXS +#define CONFIG_EHCI_MXS_PORT 1 +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_STORAGE +#endif + +/* + * SPI + */ +#ifdef CONFIG_CMD_SPI +#define CONFIG_HARD_SPI +#define CONFIG_MXS_SPI +#define CONFIG_SPI_HALF_DUPLEX +#define CONFIG_DEFAULT_SPI_BUS 2 +#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0 + +/* SPI FLASH */ +#ifdef CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_CS 2 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SF_DEFAULT_SPEED 24000000 + +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_BUS 2 +#define CONFIG_ENV_SPI_MAX_HZ 24000000 +#define CONFIG_ENV_SPI_MODE SPI_MODE_0 +#endif +#endif + +/* + * Boot Linux + */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_BOOTARGS "console=ttyAM0,115200n8 " +#define CONFIG_BOOTCOMMAND "run bootcmd_net" +#define CONFIG_LOADADDR 0x42000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +/* + * Extra Environments + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "update_nand_full_filename=u-boot.nand\0" \ + "update_nand_firmware_filename=u-boot.sb\0" \ + "update_nand_firmware_maxsz=0x100000\0" \ + "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \ + "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \ + "update_nand_get_fcb_size=" /* Get size of FCB blocks */ \ + "nand device 0 ; " \ + "nand info ; " \ + "setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \ + "setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \ + "update_nand_full=" /* Update FCB, DBBT and FW */ \ + "if tftp ${update_nand_full_filename} ; then " \ + "run update_nand_get_fcb_size ; " \ + "nand scrub -y 0x0 ${filesize} ; " \ + "nand write.raw ${loadaddr} 0x0 ${update_nand_fcb} ; " \ + "setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \ + "setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \ + "nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \ + "fi\0" \ + "update_nand_firmware=" /* Update only firmware */ \ + "if tftp ${update_nand_firmware_filename} ; then " \ + "run update_nand_get_fcb_size ; " \ + "setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \ + "setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \ + "setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \ + "nand erase ${fcb_sz} ${fw_sz} ; " \ + "nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \ + "nand write ${loadaddr} ${fw_off} ${filesize} ; " \ + "fi\0" + +#endif /* __M28_H__ */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index ebb572e3f..15e40c538 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -215,7 +215,7 @@ "rdaddr=0x81000000\0" \ "usbtty=cdc_acm\0" \ "bootfile=uImage.beagle\0" \ - "console=ttyS2,115200n8\0" \ + "console=tty02,115200n8\0" \ "mpurate=auto\0" \ "buddy=none "\ "optargs=\0" \ diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index f53576955..42a8f10ad 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -39,7 +39,7 @@ /* Get CPU defs */ #include <asm/arch/cpu.h> -#include <asm/arch/omap4.h> +#include <asm/arch/omap.h> /* Display CPU and Board Info */ #define CONFIG_DISPLAY_CPUINFO 1 @@ -122,6 +122,9 @@ /* Flash */ #define CONFIG_SYS_NO_FLASH 1 +/* clocks */ +#define CONFIG_SYS_CLOCKS_ENABLE_ALL + /* commands to include */ #include <config_cmd_default.h> @@ -278,4 +281,6 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds" +#define CONFIG_SYS_ENABLE_PADS_ALL + #endif /* __CONFIG_OMAP4_COMMON_H */ diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h new file mode 100644 index 000000000..b763f01b2 --- /dev/null +++ b/include/configs/omap5_evm.h @@ -0,0 +1,284 @@ +/* + * (C) Copyright 2010 + * Texas Instruments Incorporated. + * Sricharan R <r.sricharan@ti.com> + * + * Derived from OMAP4 done by: + * Aneesh V <aneesh@ti.com> + * + * Configuration settings for the TI EVM5430 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP /* in a TI OMAP core */ +#define CONFIG_OMAP54XX /* which is a 54XX */ +#define CONFIG_OMAP5430 /* which is in a 5430 */ +#define CONFIG_5430EVM /* working with EVM */ +#define CONFIG_ARCH_CPU_INIT + +/* Get CPU defs */ +#include <asm/arch/cpu.h> +#include <asm/arch/omap.h> + +/* Display CPU and Board Info */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Clock Defines */ +#define V_OSCK 38400000 /* Clock output from T2 */ +#define V_SCLK V_OSCK + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_OF_LIBFDT + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +/* + * Size of malloc() pool + * Total Size Environment - 128k + * Malloc - add 256k + */ +#define CONFIG_ENV_SIZE (128 << 10) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) +/* Vector Base */ +#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE + +/* + * Hardware drivers + */ + +/* + * serial port - NS16550 compatible + */ +#define V_NS16550_CLK 48000000 + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 UART3_BASE + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} +/* I2C */ +#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_DRIVER_OMAP34XX_I2C +#define CONFIG_I2C_MULTI_BUS + +/* TWL6030 */ +#define CONFIG_TWL6030_POWER +#define CONFIG_CMD_BAT + +/* MMC */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_DOS_PARTITION + +/* MMC ENV related defines */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ +#define CONFIG_ENV_OFFSET 0xE0000 + +/* USB */ +#define CONFIG_MUSB_UDC +#define CONFIG_USB_OMAP3 + +/* USB device configuration */ +#define CONFIG_USB_DEVICE +#define CONFIG_USB_TTY +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* Flash */ +#define CONFIG_SYS_NO_FLASH + +/* Cache */ +#define CONFIG_SYS_CACHELINE_SIZE 64 +#define CONFIG_SYS_CACHELINE_SHIFT 6 + +/* commands to include */ +#include <config_cmd_default.h> + +/* Enabled commands */ +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_SAVEENV + +/* Disabled commands */ +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMLS /* List all found images */ + +/* + * Environment setup + */ + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "console=ttyS2,115200n8\0" \ + "usbtty=cdc_acm\0" \ + "vram=16M\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext3 rootwait\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "vram=${vram} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc${mmcdev} ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmc rescan ${mmcdev}; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "fi; " \ + "fi; " \ + "fi" + +#define CONFIG_AUTO_COMPLETE 1 + +/* + * Miscellaneous configurable options + */ + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "OMAP5430 EVM # " +#define CONFIG_SYS_CBSIZE 256 +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +/* + * memtest setup + */ +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20)) + +/* Default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x80000000 + +/* Use General purpose timer 1 */ +#define CONFIG_SYS_TIMERBASE GPT2_BASE +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 << 10) /* Regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack */ +#endif + +/* + * SDRAM Memory Map + * Even though we use two CS all the memory + * is mapped to one contiguous block + */ +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_INIT_RAM_ADDR 0x4030D800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS + +/* Defines for SDRAM init */ +#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION +#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS +#endif + +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_TEXT_BASE 0x40304350 +#define CONFIG_SPL_MAX_SIZE 0x1E000 /* 120K */ +#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK + +#define CONFIG_SPL_BSS_START_ADDR 0x80000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ + +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds" + +/* + * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM + * 64 bytes before this address should be set aside for u-boot.img's + * header. That is 0x800FFFC0--0x80100000 should not be used for any + * other needs. + */ +#define CONFIG_SYS_TEXT_BASE 0x80100000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index 89e17b83f..55455e7a2 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -52,6 +52,9 @@ #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_SYS_TEXT_BASE 0 +#define MACH_TYPE_PM9261 1187 +#define CONFIG_MACH_TYPE MACH_TYPE_PM9261 + /* clocks */ /* CKGR_MOR - enable main osc. */ #define CONFIG_SYS_MOR_VAL \ diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 1f7543c13..43104a3e2 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -52,6 +52,9 @@ #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_SYS_TEXT_BASE 0 +#define MACH_TYPE_PM9263 1475 +#define CONFIG_MACH_TYPE MACH_TYPE_PM9263 + /* clocks */ #define CONFIG_SYS_MOR_VAL \ (AT91_PMC_MOR_MOSCEN | \ diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index acc120445..d3beaf300 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -41,6 +41,9 @@ #define CONFIG_PM9G45 1 /* It's an Ronetix PM9G45 */ #define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9G45" +#define MACH_TYPE_PM9G45 2672 +#define CONFIG_MACH_TYPE MACH_TYPE_PM9G45 + /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h index 9db4d999b..dd68c66df 100644 --- a/include/configs/vpac270.h +++ b/include/configs/vpac270.h @@ -107,7 +107,8 @@ */ #ifdef CONFIG_CMD_MMC #define CONFIG_MMC -#define CONFIG_PXA_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_PXA_MMC_GENERIC #define CONFIG_SYS_MMC_BASE 0xF0000000 #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 diff --git a/include/onenand_uboot.h b/include/onenand_uboot.h index 92279d56e..f321d8a99 100644 --- a/include/onenand_uboot.h +++ b/include/onenand_uboot.h @@ -52,4 +52,7 @@ extern int flexonenand_set_boundary(struct mtd_info *mtd, int die, extern void s3c64xx_onenand_init(struct mtd_info *); extern void s3c64xx_set_width_regs(struct onenand_chip *); +/* SPL */ +void onenand_spl_load_image(uint32_t offs, uint32_t size, void *dst); + #endif /* __UBOOT_ONENAND_H */ diff --git a/spl/Makefile b/spl/Makefile index c8317fa70..6ac42a2d6 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -54,6 +54,7 @@ LIBS-$(CONFIG_SPL_FAT_SUPPORT) += fs/fat/libfat.o LIBS-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/libgeneric.o LIBS-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/libpower.o LIBS-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/libnand.o +LIBS-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/libonenand.o LIBS-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/libdma.o LIBS-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/memory.o @@ -63,6 +64,9 @@ endif ifeq ($(SOC),omap4) LIBS-y += $(CPUDIR)/omap-common/libomap-common.o endif +ifeq ($(SOC),omap5) +LIBS-y += $(CPUDIR)/omap-common/libomap-common.o +endif START := $(addprefix $(SPLTREE)/,$(START)) LIBS := $(addprefix $(SPLTREE)/,$(sort $(LIBS-y))) diff --git a/tools/.gitignore b/tools/.gitignore index 07f21a376..98a5c7842 100644 --- a/tools/.gitignore +++ b/tools/.gitignore @@ -4,6 +4,7 @@ /img2srec /mkimage /mpc86x_clk +/mxsboot /ncb /ncp /ubsha1 diff --git a/tools/Makefile b/tools/Makefile index df56a250b..ca93156b2 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -67,6 +67,7 @@ BIN_FILES-$(CONFIG_CMD_NET) += gen_eth_addr$(SFX) BIN_FILES-$(CONFIG_CMD_LOADS) += img2srec$(SFX) BIN_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes$(SFX) BIN_FILES-y += mkimage$(SFX) +BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX) BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX) BIN_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1$(SFX) @@ -91,6 +92,7 @@ NOPED_OBJ_FILES-y += kwbimage.o NOPED_OBJ_FILES-y += imximage.o NOPED_OBJ_FILES-y += omapimage.o NOPED_OBJ_FILES-y += mkimage.o +OBJ_FILES-$(CONFIG_MX28) += mxsboot.o OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o NOPED_OBJ_FILES-y += os_support.o OBJ_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1.o @@ -206,6 +208,10 @@ $(obj)mpc86x_clk$(SFX): $(obj)mpc86x_clk.o $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ $(HOSTSTRIP) $@ +$(obj)mxsboot$(SFX): $(obj)mxsboot.o + $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ + $(HOSTSTRIP) $@ + $(obj)ncb$(SFX): $(obj)ncb.o $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ $(HOSTSTRIP) $@ diff --git a/tools/mxsboot.c b/tools/mxsboot.c new file mode 100644 index 000000000..176753d2c --- /dev/null +++ b/tools/mxsboot.c @@ -0,0 +1,684 @@ +/* + * Freescale i.MX28 image generator + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <fcntl.h> +#include <sys/stat.h> +#include <sys/types.h> +#include <unistd.h> + +#include "compiler.h" + +/* + * Default BCB layout. + * + * TWEAK this if you have blown any OCOTP fuses. + */ +#define STRIDE_PAGES 64 +#define STRIDE_COUNT 4 + +/* + * Layout for 256Mb big NAND with 2048b page size, 64b OOB size and + * 128kb erase size. + * + * TWEAK this if you have different kind of NAND chip. + */ +uint32_t nand_writesize = 2048; +uint32_t nand_oobsize = 64; +uint32_t nand_erasesize = 128 * 1024; + +/* + * Sector on which the SigmaTel boot partition (0x53) starts. + */ +uint32_t sd_sector = 2048; + +/* + * Each of the U-Boot bootstreams is at maximum 1MB big. + * + * TWEAK this if, for some wild reason, you need to boot bigger image. + */ +#define MAX_BOOTSTREAM_SIZE (1 * 1024 * 1024) + +/* i.MX28 NAND controller-specific constants. DO NOT TWEAK! */ +#define MXS_NAND_DMA_DESCRIPTOR_COUNT 4 +#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE 512 +#define MXS_NAND_METADATA_SIZE 10 +#define MXS_NAND_COMMAND_BUFFER_SIZE 32 + +struct mx28_nand_fcb { + uint32_t checksum; + uint32_t fingerprint; + uint32_t version; + struct { + uint8_t data_setup; + uint8_t data_hold; + uint8_t address_setup; + uint8_t dsample_time; + uint8_t nand_timing_state; + uint8_t rea; + uint8_t rloh; + uint8_t rhoh; + } timing; + uint32_t page_data_size; + uint32_t total_page_size; + uint32_t sectors_per_block; + uint32_t number_of_nands; /* Ignored */ + uint32_t total_internal_die; /* Ignored */ + uint32_t cell_type; /* Ignored */ + uint32_t ecc_block_n_ecc_type; + uint32_t ecc_block_0_size; + uint32_t ecc_block_n_size; + uint32_t ecc_block_0_ecc_type; + uint32_t metadata_bytes; + uint32_t num_ecc_blocks_per_page; + uint32_t ecc_block_n_ecc_level_sdk; /* Ignored */ + uint32_t ecc_block_0_size_sdk; /* Ignored */ + uint32_t ecc_block_n_size_sdk; /* Ignored */ + uint32_t ecc_block_0_ecc_level_sdk; /* Ignored */ + uint32_t num_ecc_blocks_per_page_sdk; /* Ignored */ + uint32_t metadata_bytes_sdk; /* Ignored */ + uint32_t erase_threshold; + uint32_t boot_patch; + uint32_t patch_sectors; + uint32_t firmware1_starting_sector; + uint32_t firmware2_starting_sector; + uint32_t sectors_in_firmware1; + uint32_t sectors_in_firmware2; + uint32_t dbbt_search_area_start_address; + uint32_t badblock_marker_byte; + uint32_t badblock_marker_start_bit; + uint32_t bb_marker_physical_offset; +}; + +struct mx28_nand_dbbt { + uint32_t checksum; + uint32_t fingerprint; + uint32_t version; + uint32_t number_bb; + uint32_t number_2k_pages_bb; +}; + +struct mx28_nand_bbt { + uint32_t nand; + uint32_t number_bb; + uint32_t badblock[510]; +}; + +struct mx28_sd_drive_info { + uint32_t chip_num; + uint32_t drive_type; + uint32_t tag; + uint32_t first_sector_number; + uint32_t sector_count; +}; + +struct mx28_sd_config_block { + uint32_t signature; + uint32_t primary_boot_tag; + uint32_t secondary_boot_tag; + uint32_t num_copies; + struct mx28_sd_drive_info drv_info[1]; +}; + +static inline uint32_t mx28_nand_ecc_size_in_bits(uint32_t ecc_strength) +{ + return ecc_strength * 13; +} + +static inline uint32_t mx28_nand_get_ecc_strength(uint32_t page_data_size, + uint32_t page_oob_size) +{ + if (page_data_size == 2048) + return 8; + + if (page_data_size == 4096) { + if (page_oob_size == 128) + return 8; + + if (page_oob_size == 218) + return 16; + } + + return 0; +} + +static inline uint32_t mx28_nand_get_mark_offset(uint32_t page_data_size, + uint32_t ecc_strength) +{ + uint32_t chunk_data_size_in_bits; + uint32_t chunk_ecc_size_in_bits; + uint32_t chunk_total_size_in_bits; + uint32_t block_mark_chunk_number; + uint32_t block_mark_chunk_bit_offset; + uint32_t block_mark_bit_offset; + + chunk_data_size_in_bits = MXS_NAND_CHUNK_DATA_CHUNK_SIZE * 8; + chunk_ecc_size_in_bits = mx28_nand_ecc_size_in_bits(ecc_strength); + + chunk_total_size_in_bits = + chunk_data_size_in_bits + chunk_ecc_size_in_bits; + + /* Compute the bit offset of the block mark within the physical page. */ + block_mark_bit_offset = page_data_size * 8; + + /* Subtract the metadata bits. */ + block_mark_bit_offset -= MXS_NAND_METADATA_SIZE * 8; + + /* + * Compute the chunk number (starting at zero) in which the block mark + * appears. + */ + block_mark_chunk_number = + block_mark_bit_offset / chunk_total_size_in_bits; + + /* + * Compute the bit offset of the block mark within its chunk, and + * validate it. + */ + block_mark_chunk_bit_offset = block_mark_bit_offset - + (block_mark_chunk_number * chunk_total_size_in_bits); + + if (block_mark_chunk_bit_offset > chunk_data_size_in_bits) + return 1; + + /* + * Now that we know the chunk number in which the block mark appears, + * we can subtract all the ECC bits that appear before it. + */ + block_mark_bit_offset -= + block_mark_chunk_number * chunk_ecc_size_in_bits; + + return block_mark_bit_offset; +} + +static inline uint32_t mx28_nand_mark_byte_offset(void) +{ + uint32_t ecc_strength; + ecc_strength = mx28_nand_get_ecc_strength(nand_writesize, nand_oobsize); + return mx28_nand_get_mark_offset(nand_writesize, ecc_strength) >> 3; +} + +static inline uint32_t mx28_nand_mark_bit_offset(void) +{ + uint32_t ecc_strength; + ecc_strength = mx28_nand_get_ecc_strength(nand_writesize, nand_oobsize); + return mx28_nand_get_mark_offset(nand_writesize, ecc_strength) & 0x7; +} + +static uint32_t mx28_nand_block_csum(uint8_t *block, uint32_t size) +{ + uint32_t csum = 0; + int i; + + for (i = 0; i < size; i++) + csum += block[i]; + + return csum ^ 0xffffffff; +} + +static struct mx28_nand_fcb *mx28_nand_get_fcb(uint32_t size) +{ + struct mx28_nand_fcb *fcb; + uint32_t bcb_size_bytes; + uint32_t stride_size_bytes; + uint32_t bootstream_size_pages; + uint32_t fw1_start_page; + uint32_t fw2_start_page; + + fcb = malloc(nand_writesize); + if (!fcb) { + printf("MX28 NAND: Unable to allocate FCB\n"); + return NULL; + } + + memset(fcb, 0, nand_writesize); + + fcb->fingerprint = 0x20424346; + fcb->version = 0x01000000; + + /* + * FIXME: These here are default values as found in kobs-ng. We should + * probably retrieve the data from NAND or something. + */ + fcb->timing.data_setup = 80; + fcb->timing.data_hold = 60; + fcb->timing.address_setup = 25; + fcb->timing.dsample_time = 6; + + fcb->page_data_size = nand_writesize; + fcb->total_page_size = nand_writesize + nand_oobsize; + fcb->sectors_per_block = nand_erasesize / nand_writesize; + + fcb->num_ecc_blocks_per_page = (nand_writesize / 512) - 1; + fcb->ecc_block_0_size = 512; + fcb->ecc_block_n_size = 512; + fcb->metadata_bytes = 10; + + if (nand_writesize == 2048) { + fcb->ecc_block_n_ecc_type = 4; + fcb->ecc_block_0_ecc_type = 4; + } else if (nand_writesize == 4096) { + if (nand_oobsize == 128) { + fcb->ecc_block_n_ecc_type = 4; + fcb->ecc_block_0_ecc_type = 4; + } else if (nand_oobsize == 218) { + fcb->ecc_block_n_ecc_type = 8; + fcb->ecc_block_0_ecc_type = 8; + } + } + + if (fcb->ecc_block_n_ecc_type == 0) { + printf("MX28 NAND: Unsupported NAND geometry\n"); + goto err; + } + + fcb->boot_patch = 0; + fcb->patch_sectors = 0; + + fcb->badblock_marker_byte = mx28_nand_mark_byte_offset(); + fcb->badblock_marker_start_bit = mx28_nand_mark_bit_offset(); + fcb->bb_marker_physical_offset = nand_writesize; + + stride_size_bytes = STRIDE_PAGES * nand_writesize; + bcb_size_bytes = stride_size_bytes * STRIDE_COUNT; + + bootstream_size_pages = (size + (nand_writesize - 1)) / + nand_writesize; + + fw1_start_page = 2 * bcb_size_bytes / nand_writesize; + fw2_start_page = (2 * bcb_size_bytes + MAX_BOOTSTREAM_SIZE) / + nand_writesize; + + fcb->firmware1_starting_sector = fw1_start_page; + fcb->firmware2_starting_sector = fw2_start_page; + fcb->sectors_in_firmware1 = bootstream_size_pages; + fcb->sectors_in_firmware2 = bootstream_size_pages; + + fcb->dbbt_search_area_start_address = STRIDE_PAGES * STRIDE_COUNT; + + return fcb; + +err: + free(fcb); + return NULL; +} + +static struct mx28_nand_dbbt *mx28_nand_get_dbbt(void) +{ + struct mx28_nand_dbbt *dbbt; + + dbbt = malloc(nand_writesize); + if (!dbbt) { + printf("MX28 NAND: Unable to allocate DBBT\n"); + return NULL; + } + + memset(dbbt, 0, nand_writesize); + + dbbt->fingerprint = 0x54424244; + dbbt->version = 0x1; + + return dbbt; +} + +static inline uint8_t mx28_nand_parity_13_8(const uint8_t b) +{ + uint32_t parity = 0, tmp; + + tmp = ((b >> 6) ^ (b >> 5) ^ (b >> 3) ^ (b >> 2)) & 1; + parity |= tmp << 0; + + tmp = ((b >> 7) ^ (b >> 5) ^ (b >> 4) ^ (b >> 2) ^ (b >> 1)) & 1; + parity |= tmp << 1; + + tmp = ((b >> 7) ^ (b >> 6) ^ (b >> 5) ^ (b >> 1) ^ (b >> 0)) & 1; + parity |= tmp << 2; + + tmp = ((b >> 7) ^ (b >> 4) ^ (b >> 3) ^ (b >> 0)) & 1; + parity |= tmp << 3; + + tmp = ((b >> 6) ^ (b >> 4) ^ (b >> 3) ^ + (b >> 2) ^ (b >> 1) ^ (b >> 0)) & 1; + parity |= tmp << 4; + + return parity; +} + +static uint8_t *mx28_nand_fcb_block(struct mx28_nand_fcb *fcb) +{ + uint8_t *block; + uint8_t *ecc; + int i; + + block = malloc(nand_writesize + nand_oobsize); + if (!block) { + printf("MX28 NAND: Unable to allocate FCB block\n"); + return NULL; + } + + memset(block, 0, nand_writesize + nand_oobsize); + + /* Update the FCB checksum */ + fcb->checksum = mx28_nand_block_csum(((uint8_t *)fcb) + 4, 508); + + /* Figure 12-11. in iMX28RM, rev. 1, says FCB is at offset 12 */ + memcpy(block + 12, fcb, sizeof(struct mx28_nand_fcb)); + + /* ECC is at offset 12 + 512 */ + ecc = block + 12 + 512; + + /* Compute the ECC parity */ + for (i = 0; i < sizeof(struct mx28_nand_fcb); i++) + ecc[i] = mx28_nand_parity_13_8(block[i + 12]); + + return block; +} + +static int mx28_nand_write_fcb(struct mx28_nand_fcb *fcb, char *buf) +{ + uint32_t offset; + uint8_t *fcbblock; + int ret = 0; + int i; + + fcbblock = mx28_nand_fcb_block(fcb); + if (!fcbblock) + return -1; + + for (i = 0; i < STRIDE_PAGES * STRIDE_COUNT; i += STRIDE_PAGES) { + offset = i * nand_writesize; + memcpy(buf + offset, fcbblock, nand_writesize + nand_oobsize); + } + + free(fcbblock); + return ret; +} + +static int mx28_nand_write_dbbt(struct mx28_nand_dbbt *dbbt, char *buf) +{ + uint32_t offset; + int i = STRIDE_PAGES * STRIDE_COUNT; + + for (; i < 2 * STRIDE_PAGES * STRIDE_COUNT; i += STRIDE_PAGES) { + offset = i * nand_writesize; + memcpy(buf + offset, dbbt, sizeof(struct mx28_nand_dbbt)); + } + + return 0; +} + +static int mx28_nand_write_firmware(struct mx28_nand_fcb *fcb, int infd, + char *buf) +{ + int ret; + off_t size; + uint32_t offset1, offset2; + + size = lseek(infd, 0, SEEK_END); + lseek(infd, 0, SEEK_SET); + + offset1 = fcb->firmware1_starting_sector * nand_writesize; + offset2 = fcb->firmware2_starting_sector * nand_writesize; + + ret = read(infd, buf + offset1, size); + if (ret != size) + return -1; + + memcpy(buf + offset2, buf + offset1, size); + + return 0; +} + +void usage(void) +{ + printf( + "Usage: mx28image [ops] <type> <infile> <outfile>\n" + "Augment BootStream file with a proper header for i.MX28 boot\n" + "\n" + " <type> type of image:\n" + " \"nand\" for NAND image\n" + " \"sd\" for SD image\n" + " <infile> input file, the u-boot.sb bootstream\n" + " <outfile> output file, the bootable image\n" + "\n"); + printf( + "For NAND boot, these options are accepted:\n" + " -w <size> NAND page size\n" + " -o <size> NAND OOB size\n" + " -e <size> NAND erase size\n" + "\n" + "For SD boot, these options are accepted:\n" + " -p <sector> Sector where the SGTL partition starts\n" + ); +} + +static int mx28_create_nand_image(int infd, int outfd) +{ + struct mx28_nand_fcb *fcb; + struct mx28_nand_dbbt *dbbt; + int ret = -1; + char *buf; + int size; + ssize_t wr_size; + + size = nand_writesize * 512 + 2 * MAX_BOOTSTREAM_SIZE; + + buf = malloc(size); + if (!buf) { + printf("Can not allocate output buffer of %d bytes\n", size); + goto err0; + } + + memset(buf, 0, size); + + fcb = mx28_nand_get_fcb(MAX_BOOTSTREAM_SIZE); + if (!fcb) { + printf("Unable to compile FCB\n"); + goto err1; + } + + dbbt = mx28_nand_get_dbbt(); + if (!dbbt) { + printf("Unable to compile DBBT\n"); + goto err2; + } + + ret = mx28_nand_write_fcb(fcb, buf); + if (ret) { + printf("Unable to write FCB to buffer\n"); + goto err3; + } + + ret = mx28_nand_write_dbbt(dbbt, buf); + if (ret) { + printf("Unable to write DBBT to buffer\n"); + goto err3; + } + + ret = mx28_nand_write_firmware(fcb, infd, buf); + if (ret) { + printf("Unable to write firmware to buffer\n"); + goto err3; + } + + wr_size = write(outfd, buf, size); + if (wr_size != size) { + ret = -1; + goto err3; + } + + ret = 0; + +err3: + free(dbbt); +err2: + free(fcb); +err1: + free(buf); +err0: + return ret; +} + +static int mx28_create_sd_image(int infd, int outfd) +{ + int ret = -1; + uint32_t *buf; + int size; + off_t fsize; + ssize_t wr_size; + struct mx28_sd_config_block *cb; + + fsize = lseek(infd, 0, SEEK_END); + lseek(infd, 0, SEEK_SET); + size = fsize + 512; + + buf = malloc(size); + if (!buf) { + printf("Can not allocate output buffer of %d bytes\n", size); + goto err0; + } + + ret = read(infd, (uint8_t *)buf + 512, fsize); + if (ret != fsize) { + ret = -1; + goto err1; + } + + cb = (struct mx28_sd_config_block *)buf; + + cb->signature = 0x00112233; + cb->primary_boot_tag = 0x1; + cb->secondary_boot_tag = 0x1; + cb->num_copies = 1; + cb->drv_info[0].chip_num = 0x0; + cb->drv_info[0].drive_type = 0x0; + cb->drv_info[0].tag = 0x1; + cb->drv_info[0].first_sector_number = sd_sector + 1; + cb->drv_info[0].sector_count = (size - 1) / 512; + + wr_size = write(outfd, buf, size); + if (wr_size != size) { + ret = -1; + goto err1; + } + + ret = 0; + +err1: + free(buf); +err0: + return ret; +} + +int parse_ops(int argc, char **argv) +{ + int i; + int tmp; + char *end; + enum param { + PARAM_WRITE, + PARAM_OOB, + PARAM_ERASE, + PARAM_PART, + PARAM_SD, + PARAM_NAND + }; + int type; + + for (i = 1; i < argc; i++) { + if (!strncmp(argv[i], "-w", 2)) + type = PARAM_WRITE; + else if (!strncmp(argv[i], "-o", 2)) + type = PARAM_OOB; + else if (!strncmp(argv[i], "-e", 2)) + type = PARAM_ERASE; + else if (!strncmp(argv[i], "-p", 2)) + type = PARAM_PART; + else /* SD/MMC */ + break; + + tmp = strtol(argv[++i], &end, 10); + if (tmp % 2) + return -1; + if (tmp <= 0) + return -1; + + if (type == PARAM_WRITE) + nand_writesize = tmp; + if (type == PARAM_OOB) + nand_oobsize = tmp; + if (type == PARAM_ERASE) + nand_erasesize = tmp; + if (type == PARAM_PART) + sd_sector = tmp; + } + + if (strcmp(argv[i], "sd") && strcmp(argv[i], "nand")) + return -1; + + if (i + 3 != argc) + return -1; + + return i; +} + +int main(int argc, char **argv) +{ + int infd, outfd; + int ret = 0; + int offset; + + offset = parse_ops(argc, argv); + if (offset < 0) { + usage(); + ret = 1; + goto err1; + } + + infd = open(argv[offset + 1], O_RDONLY); + if (infd < 0) { + printf("Input BootStream file can not be opened\n"); + ret = 2; + goto err1; + } + + outfd = open(argv[offset + 2], O_CREAT | O_TRUNC | O_WRONLY, + S_IRUSR | S_IWUSR); + if (outfd < 0) { + printf("Output file can not be created\n"); + ret = 3; + goto err2; + } + + if (!strcmp(argv[offset], "sd")) + ret = mx28_create_sd_image(infd, outfd); + else if (!strcmp(argv[offset], "nand")) + ret = mx28_create_nand_image(infd, outfd); + + close(outfd); +err2: + close(infd); +err1: + return ret; +} |