* Patch by Klaus Heydeck, 13 Mar 2003:

  Add support for KUP4X Board

28 files changed, 1727 insertions, 337 deletions

diff --git a/CHANGELOG b/CHANGELOG
index fe2304689..9a22e635b 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,9 @@
 Changes for U-Boot 1.0.2:
 ======================================================================
 
+* Patch by Klaus Heydeck, 13 Mar 2003:
+  Add support for KUP4X Board
+
 * Patch by Pavel Bartusek, 21 Mar 2004
   Add Reiserfs support
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 6f8383ebb..0a1b55a4b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -146,6 +146,7 @@ Bill Hargen <Bill_Hargen@Jabil.com>
 Klaus Heydeck <heydeck@kieback-peter.de>
 
 	KUP4K			MPC855
+	KUP4X			MPC859
 
 Murray Jensen <Murray.Jensen@cmst.csiro.au>
 
diff --git a/MAKEALL b/MAKEALL
index d692c5bf4..ede87629b 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -40,15 +40,15 @@ LIST_8xx="	\
 	GEN860T_SC	GENIETV		GTH		hermes		\
 	IAD210		ICU862_100MHz	IP860		IVML24		\
 	IVML24_128	IVML24_256	IVMS8		IVMS8_128	\
-	IVMS8_256	KUP4K		LANTEC		lwmon		\
-	MBX		MBX860T		MHPC		MPC86xADS	\
-	MVS1		NETVIA		NETVIA_V2	NX823		\
-	pcu_e		QS823		QS850		QS860T		\
-	R360MPI		RBC823		rmu		RPXClassic	\
-	RPXlite		RRvision	SM850		SPD823TS	\
-	svm_sc8xx	SXNI855T	TOP860		TQM823L		\
-	TQM823L_LCD	TQM850L		TQM855L		TQM860L		\
-	v37								\
+	IVMS8_256	KUP4K		KUP4X		LANTEC		\
+	lwmon		MBX		MBX860T		MHPC		\
+	MPC86xADS	MVS1		NETVIA		NETVIA_V2	\
+	NX823		pcu_e		QS823		QS850		\
+	QS860T		R360MPI		RBC823		rmu		\
+	RPXClassic	RPXlite		RRvision	SM850		\
+	SPD823TS	svm_sc8xx	SXNI855T	TOP860		\
+	TQM823L		TQM823L_LCD	TQM850L		TQM855L		\
+	TQM860L		v37						\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index a7e09dd7a..09096a90e 100644
--- a/Makefile
+++ b/Makefile
@@ -358,7 +358,10 @@ IVMS8_config:	unconfig
 	@./mkconfig -a IVMS8 ppc mpc8xx ivm
 
 KUP4K_config	:	unconfig
-	@./mkconfig $(@:_config=) ppc mpc8xx kup4k
+	@./mkconfig $(@:_config=) ppc mpc8xx kup4k kup
+
+KUP4X_config    :       unconfig
+	@./mkconfig $(@:_config=) ppc mpc8xx kup4x kup
 
 LANTEC_config	:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx lantec
diff --git a/board/kup4k/Makefile b/board/kup/Makefile
index fdc6fd53e..071f0d2ac 100644
--- a/board/kup4k/Makefile
+++ b/board/kup/Makefile
@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000-2002
+# (C) Copyright 2000-2004
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o flash.o
+OBJS	= $(BOARD).o flash.o kup.o
 
 $(LIB):	.depend $(OBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/kup4k/flash.c b/board/kup/common/flash.c
index 619ccb942..903c88f06 100644
--- a/board/kup4k/flash.c
+++ b/board/kup/common/flash.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2002
+ * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -197,13 +197,13 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 	case AMD_ID_LV800T:
 		info->flash_id += FLASH_AM800T;
 		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
+		info->size = 0x00100000;
+		break;				/* => 1 MB		*/
 	case AMD_ID_LV800B:
 		info->flash_id += FLASH_AM800B;
 		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
+		info->size = 0x00100000;
+		break;				/* => 1 MB		*/
 	default:
 		info->flash_id = FLASH_UNKNOWN;
 		return (0);			/* => no or unknown flash */
diff --git a/board/kup/common/kup.c b/board/kup/common/kup.c
new file mode 100644
index 000000000..69ffa2c2c
--- /dev/null
+++ b/board/kup/common/kup.c
@@ -0,0 +1,72 @@
+/*
+ * (C) Copyright 2004
+ * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include "kup.h"
+
+int misc_init_f (void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile sysconf8xx_t *siu = &immap->im_siu_conf;
+
+	while (siu->sc_sipend & 0x20000000) {
+		/* printf("waiting for 5V VCC\n"); */
+		;
+	}
+
+	/* RS232 / RS485 default is RS232 */
+	immap->im_ioport.iop_padat &= ~(PA_RS485);
+	immap->im_ioport.iop_papar &= ~(PA_RS485);
+	immap->im_ioport.iop_paodr &= ~(PA_RS485);
+	immap->im_ioport.iop_padir |= (PA_RS485);
+	return (0);
+}
+
+
+#ifdef CONFIG_IDE_LED
+void ide_led (uchar led, uchar status)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+	/* We have one led for both pcmcia slots */
+	if (status) {		/* led on */
+		immap->im_ioport.iop_padat &= ~(PA_LED_YELLOW);
+	} else {
+		immap->im_ioport.iop_padat |= (PA_LED_YELLOW);
+	}
+}
+#endif
+
+void poweron_key (void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+	immap->im_ioport.iop_pcpar &= ~(PC_SWITCH1);
+	immap->im_ioport.iop_pcdir &= ~(PC_SWITCH1);
+
+	if (immap->im_ioport.iop_pcdat & (PC_SWITCH1))
+		setenv ("key1", "off");
+	else
+		setenv ("key1", "on");
+}
diff --git a/board/kup/common/kup.h b/board/kup/common/kup.h
new file mode 100644
index 000000000..70d7f01e6
--- /dev/null
+++ b/board/kup/common/kup.h
@@ -0,0 +1,44 @@
+/*
+ * (C) Copyright 2004
+ * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __KUP_H
+#define __KUP_H
+
+#define PA_8       0x0080
+#define PA_11      0x0010
+#define PA_12      0x0008
+
+#define PB_14      0x00020000
+#define PB_17      0x00004000
+
+#define PC_9       0x0040
+
+#define PA_RS485                 PA_11   /* SCC1: 0=RS232 1=RS485 */
+#define PA_LED_YELLOW            PA_8
+#define BP_USB_VCC               PB_14   /* VCC for USB devices 0=vcc on, 1=vcc off*/
+#define PB_LCD_PWM	         PB_17	 /* PB 17 */
+#define PC_SWITCH1               PC_9    /* Reboot switch */
+
+extern void poweron_key (void);
+
+#endif	/* __KUP_H */
diff --git a/board/kup/kup4k/Makefile b/board/kup/kup4k/Makefile
new file mode 100644
index 000000000..573204491
--- /dev/null
+++ b/board/kup/kup4k/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o ../common/flash.o ../common/kup.o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/kup4k/config.mk b/board/kup/kup4k/config.mk
index 10e0fd439..22e30b2ca 100644
--- a/board/kup4k/config.mk
+++ b/board/kup/kup4k/config.mk
@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000-2002
+# (C) Copyright 2000-2004
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
diff --git a/board/kup4k/kup4k.c b/board/kup/kup4k/kup4k.c
index abf529440..8bed3d5ad 100644
--- a/board/kup4k/kup4k.c
+++ b/board/kup/kup4k/kup4k.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000, 2001, 2002
+ * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
  *
@@ -24,16 +24,23 @@
 
 #include <common.h>
 #include <mpc8xx.h>
+#include "../common/kup.h"
 #ifdef CONFIG_KUP4K_LOGO
    #include "s1d13706.h"
 #endif
 
+#undef DEBUG
+#ifdef  DEBUG
+# define debugk(fmt,args...)    printf(fmt ,##args)
+#else
+# define debugk(fmt,args...)
+#endif
+
+typedef struct {
+	volatile unsigned char *VmemAddr;
+	volatile unsigned char *RegAddr;
+} FB_INFO_S1D13xxx;
 
-typedef struct
-{
-    volatile unsigned char *VmemAddr;
-    volatile unsigned char *RegAddr;
-}FB_INFO_S1D13xxx;
 
 /* ------------------------------------------------------------------------- */
 
@@ -42,15 +49,15 @@ static long int dram_size (long int, long int *, long int);
 #endif
 
 #ifdef CONFIG_KUP4K_LOGO
-   void lcd_logo(bd_t *bd);
+void lcd_logo(bd_t *bd);
 #endif
 
+
 /* ------------------------------------------------------------------------- */
 
 #define	_NOT_USED_	0xFFFFFFFF
 
-const uint sdram_table[] =
-{
+const uint sdram_table[] = {
 	/*
 	 * Single Read. (Offset 0 in UPMA RAM)
 	 */
@@ -114,8 +121,19 @@ const uint sdram_table[] =
 
 int checkboard (void)
 {
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	uchar *latch,rev,mod;
 
-	printf ("### No HW ID - assuming KUP4K-Color\n");
+	/*
+	 * Init ChipSelect #4 (CAN + HW-Latch)
+	 */
+	immap->im_memctl.memc_or4 = 0xFFFF8926;
+	immap->im_memctl.memc_br4 = 0x90000401;
+
+	latch=(uchar *)0x90000200;
+	rev = (*latch & 0xF8) >> 3;
+	mod=(*latch & 0x03);
+	printf ("Board: KUP4K Rev %d.%d SN: %s\n",rev,mod,getenv("ethaddr"));
 	return (0);
 }
 
@@ -230,10 +248,42 @@ static long int dram_size (long int mamr_value, long int *base,
 {
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	volatile long int *addr;
+	ulong cnt, val;
+	ulong save[32];				/* to make test non-destructive */
+	unsigned char i = 0;
 
 	memctl->memc_mamr = mamr_value;
 
-	return(get_ram_size(base, maxsize));
+	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	/* write 0 to base address */
+	addr = base;
+	save[i] = *addr;
+	*addr = 0;
+
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		val = *addr;
+		*addr = save[--i];
+
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
+		}
+	}
+	return (maxsize);
 }
 #endif
 
@@ -247,7 +297,6 @@ int misc_init_r (void)
 #ifdef CONFIG_KUP4K_LOGO
 	bd_t *bd = gd->bd;
 
-
 	lcd_logo (bd);
 #endif							/* CONFIG_KUP4K_LOGO */
 #ifdef CONFIG_IDE_LED
@@ -257,14 +306,14 @@ int misc_init_r (void)
 	immap->im_ioport.iop_papar &= ~0x80;
 	immap->im_ioport.iop_padat |= 0x80;	/* turn it off */
 #endif
+	setenv("hw","4k");
+	poweron_key();
 	return (0);
 }
 
 #ifdef CONFIG_KUP4K_LOGO
 
 
-#define PB_LCD_PWM	((uint)0x00004000)	/* PB 17 */
-
 void lcd_logo (bd_t * bd)
 {
 	FB_INFO_S1D13xxx fb_info;
@@ -277,104 +326,117 @@ void lcd_logo (bd_t * bd)
 	int rs, gs, bs;
 	int r = 8, g = 8, b = 4;
 	int r1, g1, b1;
+	int n;
+	uchar tmp[64];		/* long enough for environment variables */
+	int tft = 0;
 
-	immr->im_cpm.cp_pbpar &= ~PB_LCD_PWM;
-	immr->im_cpm.cp_pbodr &= ~PB_LCD_PWM;
-	immr->im_cpm.cp_pbdat &= ~PB_LCD_PWM;	/* set to 0 = enabled */
-	immr->im_cpm.cp_pbdir |= PB_LCD_PWM;
-
+	immr->im_cpm.cp_pbpar &= ~(PB_LCD_PWM);
+	immr->im_cpm.cp_pbodr &= ~(PB_LCD_PWM);
+	immr->im_cpm.cp_pbdat &= ~(PB_LCD_PWM);	/* set to 0 = enabled */
+	immr->im_cpm.cp_pbdir |= (PB_LCD_PWM);
 
 /*----------------------------------------------------------------------------- */
-	 /**/
 /* Initialize the chip and the frame buffer driver. */
-			 /**/
 /*----------------------------------------------------------------------------- */
-			memctl = &immr->im_memctl;
-/*	memctl->memc_or5 = 0xFFC007F0;    / * 4 MB  17 WS or externel TA */
-/*	memctl->memc_br5 = 0x80000801;    / * Start at 0x80000000 */
+	memctl = &immr->im_memctl;
 
-	memctl->memc_or5 = 0xFFC00708;	/* 4 MB  17 WS or externel TA */
-	memctl->memc_br5 = 0x80080801;	/* Start at 0x80080000 */
 
+	/*
+	 * Init ChipSelect #5 (S1D13768)
+	 */
+	memctl->memc_or5 = 0xFFC007F0;	/* 4 MB  17 WS or externel TA */
+	memctl->memc_br5 = 0x80080801;	/* Start at 0x80080000 */
 
 	fb_info.VmemAddr = (unsigned char *) (S1D_PHYSICAL_VMEM_ADDR);
 	fb_info.RegAddr = (unsigned char *) (S1D_PHYSICAL_REG_ADDR);
 
 	if ((((S1D_VALUE *) fb_info.RegAddr)[0] != 0x28)
-		|| (((S1D_VALUE *) fb_info.RegAddr)[1] != 0x14)) {
+	    || (((S1D_VALUE *) fb_info.RegAddr)[1] != 0x14)) {
 		printf ("Warning:LCD Controller S1D13706 not found\n");
+		setenv ("lcd", "none");
 		return;
 	}
 
-	/* init controller */
-	for (i = 0; i < sizeof (aS1DRegs) / sizeof (aS1DRegs[0]); i++) {
-		s1dReg = aS1DRegs[i].Index;
-		s1dValue = aS1DRegs[i].Value;
-/*      printf("sid1 Index: %02x Register: %02x Wert: %02x\n",i, aS1DRegs[i].Index, aS1DRegs[i].Value); */
+
+	for (i = 0; i < sizeof(aS1DRegs_prelimn) / sizeof(aS1DRegs_prelimn[0]); i++) {
+		s1dReg = aS1DRegs_prelimn[i].Index;
+		s1dValue = aS1DRegs_prelimn[i].Value;
+		debugk ("s13768 reg: %02x value: %02x\n",
+			aS1DRegs_prelimn[i].Index, aS1DRegs_prelimn[i].Value);
 		((S1D_VALUE *) fb_info.RegAddr)[s1dReg / sizeof (S1D_VALUE)] =
-				s1dValue;
+			s1dValue;
 	}
 
-#undef MONOCHROME
-#ifdef MONOCHROME
-	switch (bd->bi_busfreq) {
-#if 0
-	case 24000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x28;
-		break;
-	case 32000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x33;
-		break;
-#endif
-	case 40000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x40;
-		break;
-	case 48000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x4C;
-		break;
-	default:
-		printf ("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n",
-				bd->bi_busfreq);
-	case 64000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x69;
-		break;
+
+	n = getenv_r ("lcd", tmp, sizeof (tmp));
+	if (n > 0) {
+		if (!strcmp ("tft", tmp))
+			tft = 1;
+		else
+			tft = 0;
 	}
-	((S1D_VALUE *) fb_info.RegAddr)[0x10] = 0x00;
-#else
-	switch (bd->bi_busfreq) {
 #if 0
-	case 24000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x22;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x34;
-		break;
-	case 32000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x34;
-		break;
-#endif
-	case 40000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x41;
-		break;
-	case 48000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x22;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x34;
-		break;
-	default:
-		printf ("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n",
-				bd->bi_busfreq);
-	case 64000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x66;
-		break;
-	}
+	if (((S1D_VALUE *) fb_info.RegAddr)[0xAC] & 0x04)
+		tft = 0;
+	else
+		tft = 1;
 #endif
 
+	debugk ("Port=0x%02x -> TFT=%d\n", tft,
+		((S1D_VALUE *) fb_info.RegAddr)[0xAC]);
+
+	/* init controller */
+	if (!tft) {
+		for (i = 0; i < sizeof(aS1DRegs_stn) / sizeof(aS1DRegs_stn[0]); i++) {
+			s1dReg = aS1DRegs_stn[i].Index;
+			s1dValue = aS1DRegs_stn[i].Value;
+			debugk ("s13768 reg: %02x value: %02x\n",
+				aS1DRegs_stn[i].Index,
+				aS1DRegs_stn[i].Value);
+			((S1D_VALUE *) fb_info.RegAddr)[s1dReg / sizeof(S1D_VALUE)] =
+				s1dValue;
+		}
+		n = getenv_r ("contrast", tmp, sizeof (tmp));
+		((S1D_VALUE *) fb_info.RegAddr)[0xB3] =
+			(n > 0) ? (uchar) simple_strtoul (tmp, NULL, 10) * 255 / 100 : 0xA0;
+		switch (bd->bi_busfreq) {
+		case 40000000:
+			((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
+			((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x41;
+			break;
+		case 48000000:
+			((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x22;
+			((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x34;
+			break;
+		default:
+			printf ("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n", bd->bi_busfreq);
+		case 64000000:
+			((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
+			((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x66;
+			break;
+		}
+		/*   setenv("lcd","stn"); */
+	} else {
+		for (i = 0; i < sizeof(aS1DRegs_tft) / sizeof(aS1DRegs_tft[0]); i++) {
+			s1dReg = aS1DRegs_tft[i].Index;
+			s1dValue = aS1DRegs_tft[i].Value;
+			debugk ("s13768 reg: %02x value: %02x\n",
+				aS1DRegs_tft[i].Index,
+				aS1DRegs_tft[i].Value);
+			((S1D_VALUE *) fb_info.RegAddr)[s1dReg / sizeof (S1D_VALUE)] =
+				s1dValue;
+		}
+
+		switch (bd->bi_busfreq) {
+		default:
+			printf ("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n", bd->bi_busfreq);
+		case 40000000:
+			((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x42;
+			((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x30;
+			break;
+		}
+		/* setenv("lcd","tft"); */
+	}
 
 	/* create and set colormap */
 	rs = 256 / (r - 1);
@@ -384,27 +446,13 @@ void lcd_logo (bd_t * bd)
 		r1 = (rs * ((i / (g * b)) % r)) * 255;
 		g1 = (gs * ((i / b) % g)) * 255;
 		b1 = (bs * ((i) % b)) * 255;
-/*     printf("%d %04x %04x %04x\n",i,r1>>4,g1>>4,b1>>4); */
+		debugk ("%d %04x %04x %04x\n", i, r1 >> 4, g1 >> 4, b1 >> 4);
 		S1D_WRITE_PALETTE (fb_info.RegAddr, i, (r1 >> 4), (g1 >> 4),
-						   (b1 >> 4));
+				   (b1 >> 4));
 	}
 
 	/* copy bitmap */
 	fb = (char *) (fb_info.VmemAddr);
 	memcpy (fb, (uchar *) CONFIG_KUP4K_LOGO, 320 * 240);
 }
-#endif							/* CONFIG_KUP4K_LOGO */
-
-#ifdef CONFIG_IDE_LED
-void ide_led (uchar led, uchar status)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-
-	/* We have one led for both pcmcia slots */
-	if (status) {				/* led on */
-		immap->im_ioport.iop_padat &= ~0x80;
-	} else {
-		immap->im_ioport.iop_padat |= 0x80;
-	}
-}
-#endif
+#endif	/* CONFIG_KUP4K_LOGO */
diff --git a/board/kup/kup4k/s1d13706.h b/board/kup/kup4k/s1d13706.h
new file mode 100644
index 000000000..cd5eccc6f
--- /dev/null
+++ b/board/kup/kup4k/s1d13706.h
@@ -0,0 +1,174 @@
+/*---------------------------------------------------------------------------- */
+/* */
+/*  File generated by S1D13706CFG.EXE */
+/* */
+/*  Copyright (c) 2000,2001 Epson Research and Development, Inc. */
+/*  All rights reserved. */
+/* */
+/*---------------------------------------------------------------------------- */
+
+/* Panel: 320x240x8bpp 70Hz Color Single STN 8-bit (PCLK=6.250MHz) (Format 2) */
+
+#define S1D_DISPLAY_WIDTH           320
+#define S1D_DISPLAY_HEIGHT          240
+#define S1D_DISPLAY_BPP             8
+#define S1D_DISPLAY_SCANLINE_BYTES  320
+#define S1D_PHYSICAL_VMEM_ADDR      0x800A0000L
+#define S1D_PHYSICAL_VMEM_SIZE      0x14000L
+#define S1D_PHYSICAL_REG_ADDR       0x80080000L
+#define S1D_PHYSICAL_REG_SIZE       0x100
+#define S1D_DISPLAY_PCLK            6250
+#define S1D_PALETTE_SIZE            256
+#define S1D_REGDELAYOFF             0xFFFE
+#define S1D_REGDELAYON              0xFFFF
+
+#define S1D_WRITE_PALETTE(p,i,r,g,b)  \
+{  \
+    ((volatile S1D_VALUE*)(p))[0x0A/sizeof(S1D_VALUE)] = (S1D_VALUE)((r)>>4);  \
+    ((volatile S1D_VALUE*)(p))[0x09/sizeof(S1D_VALUE)] = (S1D_VALUE)((g)>>4);  \
+    ((volatile S1D_VALUE*)(p))[0x08/sizeof(S1D_VALUE)] = (S1D_VALUE)((b)>>4);  \
+    ((volatile S1D_VALUE*)(p))[0x0B/sizeof(S1D_VALUE)] = (S1D_VALUE)(i);  \
+}
+
+#define S1D_READ_PALETTE(p,i,r,g,b)  \
+{  \
+    ((volatile S1D_VALUE*)(p))[0x0F/sizeof(S1D_VALUE)] = (S1D_VALUE)(i);  \
+    r = ((volatile S1D_VALUE*)(p))[0x0E/sizeof(S1D_VALUE)];  \
+    g = ((volatile S1D_VALUE*)(p))[0x0D/sizeof(S1D_VALUE)];  \
+    b = ((volatile S1D_VALUE*)(p))[0x0C/sizeof(S1D_VALUE)];  \
+}
+
+typedef unsigned short S1D_INDEX;
+typedef unsigned char  S1D_VALUE;
+
+
+typedef struct
+{
+    S1D_INDEX Index;
+    S1D_VALUE Value;
+} S1D_REGS;
+
+
+static S1D_REGS aS1DRegs_prelimn[] =
+{
+    {0x10,0x00},   /* PANEL Type Register */
+    {0xA8,0x00},   /* GPIO Config Register 0 */
+    {0xA9,0x80},   /* GPIO Config Register 1 */
+
+};
+
+static S1D_REGS aS1DRegs_stn[] =
+{
+    {0x04,0x10},   /* BUSCLK MEMCLK Config Register */
+    {0x10,0xD0},   /* PANEL Type Register */
+    {0x11,0x00},   /* MOD Rate Register */
+    {0x14,0x27},   /* Horizontal Display Period Register */
+    {0x16,0x00},   /* Horizontal Display Period Start Pos Register 0 */
+    {0x17,0x00},   /* Horizontal Display Period Start Pos Register 1 */
+    {0x18,0xF0},   /* Vertical Total Register 0 */
+    {0x19,0x00},   /* Vertical Total Register 1 */
+    {0x1C,0xEF},   /* Vertical Display Period Register 0 */
+    {0x1D,0x00},   /* Vertical Display Period Register 1 */
+    {0x1E,0x00},   /* Vertical Display Period Start Pos Register 0 */
+    {0x1F,0x00},   /* Vertical Display Period Start Pos Register 1 */
+    {0x20,0x87},   /* Horizontal Sync Pulse Width Register */
+    {0x22,0x00},   /* Horizontal Sync Pulse Start Pos Register 0 */
+    {0x23,0x00},   /* Horizontal Sync Pulse Start Pos Register 1 */
+    {0x24,0x80},   /* Vertical Sync Pulse Width Register */
+    {0x26,0x01},   /* Vertical Sync Pulse Start Pos Register 0 */
+    {0x27,0x00},   /* Vertical Sync Pulse Start Pos Register 1 */
+    {0x70,0x83},   /* Display Mode Register */
+    {0x71,0x00},   /* Special Effects Register */
+    {0x74,0x00},   /* Main Window Display Start Address Register 0 */
+    {0x75,0x00},   /* Main Window Display Start Address Register 1 */
+    {0x76,0x00},   /* Main Window Display Start Address Register 2 */
+    {0x78,0x50},   /* Main Window Address Offset Register 0 */
+    {0x79,0x00},   /* Main Window Address Offset Register 1 */
+    {0x7C,0x00},   /* Sub Window Display Start Address Register 0 */
+    {0x7D,0x00},   /* Sub Window Display Start Address Register 1 */
+    {0x7E,0x00},   /* Sub Window Display Start Address Register 2 */
+    {0x80,0x50},   /* Sub Window Address Offset Register 0 */
+    {0x81,0x00},   /* Sub Window Address Offset Register 1 */
+    {0x84,0x00},   /* Sub Window X Start Pos Register 0 */
+    {0x85,0x00},   /* Sub Window X Start Pos Register 1 */
+    {0x88,0x00},   /* Sub Window Y Start Pos Register 0 */
+    {0x89,0x00},   /* Sub Window Y Start Pos Register 1 */
+    {0x8C,0x4F},   /* Sub Window X End Pos Register 0 */
+    {0x8D,0x00},   /* Sub Window X End Pos Register 1 */
+    {0x90,0xEF},   /* Sub Window Y End Pos Register 0 */
+    {0x91,0x00},   /* Sub Window Y End Pos Register 1 */
+    {0xA0,0x00},   /* Power Save Config Register */
+    {0xA1,0x00},   /* CPU Access Control Register */
+    {0xA2,0x00},   /* Software Reset Register */
+    {0xA3,0x00},   /* BIG Endian Support Register */
+    {0xA4,0x00},   /* Scratch Pad Register 0 */
+    {0xA5,0x00},   /* Scratch Pad Register 1 */
+    {0xA8,0x01},   /* GPIO Config Register 0 */
+    {0xA9,0x80},   /* GPIO Config Register 1 */
+    {0xAC,0x01},   /* GPIO Status Control Register 0 */
+    {0xAD,0x00},   /* GPIO Status Control Register 1 */
+    {0xB0,0x10},   /* PWM CV Clock Control Register */
+    {0xB1,0x80},   /* PWM CV Clock Config Register */
+    {0xB2,0x00},   /* CV Clock Burst Length Register */
+    {0xAD,0x80},   /* reset seq */
+    {0x70,0x03},
+};
+
+static S1D_REGS aS1DRegs_tft[] =
+{
+    {0x04,0x10},   /* BUSCLK MEMCLK Config Register */
+    {0x05,0x42},   /* PCLK Config  Register */
+    {0x10,0x61},   /* PANEL Type Register */
+    {0x11,0x00},   /* MOD Rate Register */
+    {0x12,0x30},   /* Horizontal Total Register */
+    {0x14,0x27},   /* Horizontal Display Period Register */
+    {0x16,0x11},   /* Horizontal Display Period Start Pos Register 0 */
+    {0x17,0x00},   /* Horizontal Display Period Start Pos Register 1 */
+    {0x18,0xFA},   /* Vertical Total Register 0 */
+    {0x19,0x00},   /* Vertical Total Register 1 */
+    {0x1C,0xEF},   /* Vertical Display Period Register 0 */
+    {0x1D,0x00},   /* Vertical Display Period Register 1 */
+    {0x1E,0x00},   /* Vertical Display Period Start Pos Register 0 */
+    {0x1F,0x00},   /* Vertical Display Period Start Pos Register 1 */
+    {0x20,0x07},   /* Horizontal Sync Pulse Width Register */
+    {0x22,0x00},   /* Horizontal Sync Pulse Start Pos Register 0 */
+    {0x23,0x00},   /* Horizontal Sync Pulse Start Pos Register 1 */
+    {0x24,0x00},   /* Vertical Sync Pulse Width Register */
+    {0x26,0x00},   /* Vertical Sync Pulse Start Pos Register 0 */
+    {0x27,0x00},   /* Vertical Sync Pulse Start Pos Register 1 */
+    {0x70,0x03},   /* Display Mode Register */
+    {0x71,0x00},   /* Special Effects Register */
+    {0x74,0x00},   /* Main Window Display Start Address Register 0 */
+    {0x75,0x00},   /* Main Window Display Start Address Register 1 */
+    {0x76,0x00},   /* Main Window Display Start Address Register 2 */
+    {0x78,0x50},   /* Main Window Address Offset Register 0 */
+    {0x79,0x00},   /* Main Window Address Offset Register 1 */
+    {0x7C,0x00},   /* Sub Window Display Start Address Register 0 */
+    {0x7D,0x00},   /* Sub Window Display Start Address Register 1 */
+    {0x7E,0x00},   /* Sub Window Display Start Address Register 2 */
+    {0x80,0x50},   /* Sub Window Address Offset Register 0 */
+    {0x81,0x00},   /* Sub Window Address Offset Register 1 */
+    {0x84,0x00},   /* Sub Window X Start Pos Register 0 */
+    {0x85,0x00},   /* Sub Window X Start Pos Register 1 */
+    {0x88,0x00},   /* Sub Window Y Start Pos Register 0 */
+    {0x89,0x00},   /* Sub Window Y Start Pos Register 1 */
+    {0x8C,0x4F},   /* Sub Window X End Pos Register 0 */
+    {0x8D,0x00},   /* Sub Window X End Pos Register 1 */
+    {0x90,0xEF},   /* Sub Window Y End Pos Register 0 */
+    {0x91,0x00},   /* Sub Window Y End Pos Register 1 */
+    {0xA0,0x00},   /* Power Save Config Register */
+    {0xA1,0x00},   /* CPU Access Control Register */
+    {0xA2,0x00},   /* Software Reset Register */
+    {0xA3,0x00},   /* BIG Endian Support Register */
+    {0xA4,0x00},   /* Scratch Pad Register 0 */
+    {0xA5,0x00},   /* Scratch Pad Register 1 */
+    {0xA8,0x01},   /* GPIO Config Register 0 */
+    {0xA9,0x80},   /* GPIO Config Register 1 */
+    {0xAC,0x01},   /* GPIO Status Control Register 0 */
+    {0xAD,0x00},   /* GPIO Status Control Register 1 */
+    {0xB0,0x10},   /* PWM CV Clock Control Register */
+    {0xB1,0x80},   /* PWM CV Clock Config Register */
+    {0xB2,0x00},   /* CV Clock Burst Length Register */
+    {0xAD,0x80},   /* reset seq */
+    {0x70,0x03},
+};
diff --git a/board/kup4k/u-boot.lds b/board/kup/kup4k/u-boot.lds
index f81a10e03..233913633 100644
--- a/board/kup4k/u-boot.lds
+++ b/board/kup/kup4k/u-boot.lds
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2002
+ * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -57,17 +57,17 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/mpc8xx/start.o		(.text)
-    cpu/mpc8xx/traps.o		(.text)
-    common/dlmalloc.o		(.text)
-    lib_ppc/ppcstring.o		(.text)
+/*
+    cpu/mpc8xx/start.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_ppc/ppcstring.o	(.text)
     lib_generic/vsprintf.o	(.text)
     lib_generic/crc32.o		(.text)
     lib_generic/zlib.o		(.text)
-    lib_ppc/cache.o		(.text)
-    lib_ppc/time.o		(.text)
 
     . = env_offset;
-    common/environment.o	(.ppcenv)
+    common/environment.o(.text)
+*/
 
     *(.text)
     *(.fixup)
diff --git a/board/kup4k/u-boot.lds.debug b/board/kup/kup4k/u-boot.lds.debug
index 87f704a76..4e369d50e 100644
--- a/board/kup4k/u-boot.lds.debug
+++ b/board/kup/kup4k/u-boot.lds.debug
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2002
+ * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
diff --git a/board/kup/kup4x/Makefile b/board/kup/kup4x/Makefile
new file mode 100644
index 000000000..3fed0f048
--- /dev/null
+++ b/board/kup/kup4x/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o ../common/flash.o ../common/kup.o usb.o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/kup/kup4x/config.mk b/board/kup/kup4x/config.mk
new file mode 100644
index 000000000..61d4e09f6
--- /dev/null
+++ b/board/kup/kup4x/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# KUP4X board
+#
+
+TEXT_BASE = 0x40000000
diff --git a/board/kup/kup4x/kup4x.c b/board/kup/kup4x/kup4x.c
new file mode 100644
index 000000000..86b749dac
--- /dev/null
+++ b/board/kup/kup4x/kup4x.c
@@ -0,0 +1,311 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include "../common/kup.h"
+#ifdef CONFIG_KUP4K_LOGO
+/* #include "s1d13706.h" */
+#endif
+
+#define KUP4X_USB
+
+
+typedef struct {
+	volatile unsigned char *VmemAddr;
+	volatile unsigned char *RegAddr;
+} FB_INFO_S1D13xxx;
+
+/* ------------------------------------------------------------------------- */
+
+int usb_init_kup4x (void);
+
+
+#ifdef CONFIG_KUP4K_LOGO
+void lcd_logo (bd_t * bd);
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+#define	_NOT_USED_	0xFFFFFFFF
+
+const uint sdram_table[] = {
+	/*
+	 * Single Read. (Offset 0 in UPMA RAM)
+	 */
+	0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
+	0x1FF77C47,		/* last */
+
+	/*
+	 * SDRAM Initialization (offset 5 in UPMA RAM)
+	 *
+	 * This is no UPM entry point. The following definition uses
+	 * the remaining space to establish an initialization
+	 * sequence, which is executed by a RUN command.
+	 *
+	 */
+	0x1FF77C35, 0xEFEABC34, 0x1FB57C35,	/* last */
+
+	/*
+	 * Burst Read. (Offset 8 in UPMA RAM)
+	 */
+	0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
+	0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47,	/* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Single Write. (Offset 18 in UPMA RAM)
+	 */
+	0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47,	/* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Burst Write. (Offset 20 in UPMA RAM)
+	 */
+	0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
+	0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47,	/* last */
+	_NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Refresh  (Offset 30 in UPMA RAM)
+	 */
+	0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+	0xFFFFFC84, 0xFFFFFC07,	/* last */
+	_NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Exception. (Offset 3c in UPMA RAM)
+	 */
+	0x7FFFFC07,		/* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	uchar *latch, rev, mod;
+
+	/*
+	 * Init ChipSelect #4 (CAN + HW-Latch)
+	 */
+	memctl->memc_or4 = 0xFFFF8926;
+	memctl->memc_br4 = 0x90000401;
+
+	latch = (uchar *) 0x90000200;
+	rev = (*latch & 0xF8) >> 3;
+	mod = (*latch & 0x03);
+	printf ("Board: KUP4X Rev %d.%d SN: %s\n", rev, mod,
+		getenv ("ethaddr"));
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	long int size_b0 = 0;
+	long int size_b1 = 0;
+	long int size_b2 = 0;
+	long int size_b3 = 0;
+
+	upmconfig (UPMA, (uint *) sdram_table,
+		   sizeof (sdram_table) / sizeof (uint));
+	/*
+	 * Preliminary prescaler for refresh (depends on number of
+	 * banks): This value is selected for four cycles every 62.4 us
+	 * with two SDRAM banks or four cycles every 31.2 us with one
+	 * bank. It will be adjusted after memory sizing.
+	 */
+	memctl->memc_mptpr = CFG_MPTPR;
+
+	memctl->memc_mar = 0x00000088;
+
+	/*
+	 * Map controller banks 1 and 2 to the SDRAM banks 2 and 3 at
+	 * preliminary addresses - these have to be modified after the
+	 * SDRAM size has been determined.
+	 */
+/*	memctl->memc_or1 = CFG_OR1_PRELIM;	*/
+/*	memctl->memc_br1 = CFG_BR1_PRELIM;	*/
+
+/*	memctl->memc_or2 = CFG_OR2_PRELIM;	*/
+/*	memctl->memc_br2 = CFG_BR2_PRELIM;	*/
+
+	memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
+
+	udelay (200);
+
+	/* perform SDRAM initializsation sequence */
+
+	memctl->memc_mcr = 0x80002105;	/* SDRAM bank 0 */
+	udelay (1);
+	memctl->memc_mcr = 0x80002830;	/* SDRAM bank 0 - execute twice */
+	udelay (1);
+	memctl->memc_mcr = 0x80002106;	/* SDRAM bank 0 - RUN MRS Pattern from loc 6 */
+	udelay (1);
+
+	memctl->memc_mcr = 0x80004105;	/* SDRAM bank 1 */
+	udelay (1);
+	memctl->memc_mcr = 0x80004830;	/* SDRAM bank 1 - execute twice */
+	udelay (1);
+	memctl->memc_mcr = 0x80004106;	/* SDRAM bank 1 - RUN MRS Pattern from loc 6 */
+	udelay (1);
+
+	memctl->memc_mcr = 0x80006105;	/* SDRAM bank 2 */
+	udelay (1);
+	memctl->memc_mcr = 0x80006830;	/* SDRAM bank 2 - execute twice */
+	udelay (1);
+	memctl->memc_mcr = 0x80006106;	/* SDRAM bank 2 - RUN MRS Pattern from loc 6 */
+	udelay (1);
+
+	memctl->memc_mcr = 0x8000C105;	/* SDRAM bank 2 */
+	udelay (1);
+	memctl->memc_mcr = 0x8000C830;	/* SDRAM bank 2 - execute twice */
+	udelay (1);
+	memctl->memc_mcr = 0x8000C106;	/* SDRAM bank 2 - RUN MRS Pattern from loc 6 */
+	udelay (1);
+
+	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
+	udelay (1000);
+#if 0				/* 4 x 8MB */
+	size_b0 = 0x00800000;
+	size_b1 = 0x00800000;
+	size_b2 = 0x00800000;
+	size_b3 = 0x00800000;
+	memctl->memc_mptpr = CFG_MPTPR;
+	udelay (1000);
+	memctl->memc_or1 = 0xFF800A00;
+	memctl->memc_br1 = 0x00000081;
+	memctl->memc_or2 = 0xFF000A00;
+	memctl->memc_br2 = 0x00800081;
+	memctl->memc_or3 = 0xFE000A00;
+	memctl->memc_br3 = 0x01000081;
+	memctl->memc_or6 = 0xFE000A00;
+	memctl->memc_br6 = 0x01800081;
+#else  /* 4 x 16 MB */
+	size_b0 = 0x01000000;
+	size_b1 = 0x01000000;
+	size_b2 = 0x01000000;
+	size_b3 = 0x01000000;
+	memctl->memc_mptpr = CFG_MPTPR;
+	udelay (1000);
+	memctl->memc_or1 = 0xFF000A00;
+	memctl->memc_br1 = 0x00000081;
+	memctl->memc_or2 = 0xFE000A00;
+	memctl->memc_br2 = 0x01000081;
+	memctl->memc_or3 = 0xFD000A00;
+	memctl->memc_br3 = 0x02000081;
+	memctl->memc_or6 = 0xFC000A00;
+	memctl->memc_br6 = 0x03000081;
+#endif
+	udelay (10000);
+
+	return (size_b0 + size_b1 + size_b2 + size_b3);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+#if 0
+static long int dram_size (long int mamr_value, long int *base,
+			   long int maxsize)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	volatile long int *addr;
+	ulong cnt, val;
+	ulong save[32];		/* to make test non-destructive */
+	unsigned char i = 0;
+
+	memctl->memc_mamr = mamr_value;
+
+	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
+		addr = base + cnt;	/* pointer arith! */
+
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	/* write 0 to base address */
+	addr = base;
+	save[i] = *addr;
+	*addr = 0;
+
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+		addr = base + cnt;	/* pointer arith! */
+
+		val = *addr;
+		*addr = save[--i];
+
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
+		}
+	}
+	return (maxsize);
+}
+#endif
+
+int misc_init_r (void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+#ifdef CONFIG_IDE_LED
+	/* Configure PA8 as output port */
+	immap->im_ioport.iop_padir |= 0x80;
+	immap->im_ioport.iop_paodr |= 0x80;
+	immap->im_ioport.iop_papar &= ~0x80;
+	immap->im_ioport.iop_padat |= 0x80;	/* turn it off */
+#endif
+#ifdef KUP4X_USB
+	usb_init_kup4x ();
+#endif
+	setenv ("hw", "4x");
+	poweron_key ();
+	return (0);
+}
diff --git a/board/kup/kup4x/u-boot.lds b/board/kup/kup4x/u-boot.lds
new file mode 100644
index 000000000..233913633
--- /dev/null
+++ b/board/kup/kup4x/u-boot.lds
@@ -0,0 +1,141 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)	}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)	}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)	}
+  .rela.got      : { *(.rela.got)	}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)	}
+  .rela.bss      : { *(.rela.bss)	}
+  .rel.plt       : { *(.rel.plt)	}
+  .rela.plt      : { *(.rela.plt)	}
+  .init          : { *(.init)		}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mpc8xx/start.o		(.text)
+/*
+    cpu/mpc8xx/start.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_ppc/ppcstring.o	(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_generic/zlib.o		(.text)
+
+    . = env_offset;
+    common/environment.o(.text)
+*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/kup/kup4x/u-boot.lds.debug b/board/kup/kup4x/u-boot.lds.debug
new file mode 100644
index 000000000..4e369d50e
--- /dev/null
+++ b/board/kup/kup4x/u-boot.lds.debug
@@ -0,0 +1,135 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mpc8xx/start.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+
+    . = env_offset;
+    common/environment.o(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/kup/kup4x/usb.c b/board/kup/kup4x/usb.c
new file mode 100644
index 000000000..5444008ec
--- /dev/null
+++ b/board/kup/kup4x/usb.c
@@ -0,0 +1,81 @@
+/*
+ * (C) Copyright 2004
+ * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include "../common/kup.h"
+
+
+#define  SL811_ADR (0x50000000)
+#define  SL811_DAT (0x50000001)
+
+
+static void sl811_write_index_data (__u8 index, __u8 data)
+{
+	*(volatile unsigned char *) (SL811_ADR) = index;
+	__asm__ ("eieio");
+	*(volatile unsigned char *) (SL811_DAT) = data;
+	__asm__ ("eieio");
+}
+
+static __u8 sl811_read_index_data (__u8 index)
+{
+	__u8 data;
+
+	*(volatile unsigned char *) (SL811_ADR) = index;
+	__asm__ ("eieio");
+	data = *(volatile unsigned char *) (SL811_DAT);
+	__asm__ ("eieio");
+	return (data);
+}
+
+int usb_init_kup4x (void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	int i;
+	unsigned char tmp;
+
+	memctl = &immap->im_memctl;
+	memctl->memc_or7 = 0xFFFF8726;
+	memctl->memc_br7 = 0x50000401;	/* start at 0x50000000 */
+	/* BP 14 low = USB ON */
+	immap->im_cpm.cp_pbdat &= ~(BP_USB_VCC);
+	/* PB 14 nomal port */
+	immap->im_cpm.cp_pbpar &= ~(BP_USB_VCC);
+	/* output */
+	immap->im_cpm.cp_pbdir |= (BP_USB_VCC);
+
+	puts ("USB:   ");
+
+	for (i = 0x10; i < 0xff; i++) {
+		sl811_write_index_data (i, i);
+		tmp = (sl811_read_index_data (i));
+		if (tmp != i) {
+			printf ("SL811 compare error index=0x%02x read=0x%02x\n", i, tmp);
+			return (-1);
+		}
+	}
+	printf ("SL811 ready\n");
+	return (0);
+}
diff --git a/board/kup4k/s1d13706.h b/board/kup4k/s1d13706.h
deleted file mode 100644
index 90027bfb6..000000000
--- a/board/kup4k/s1d13706.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*---------------------------------------------------------------------------- */
-/* */
-/*  File generated by S1D13706CFG.EXE */
-/* */
-/*  Copyright (c) 2000,2001 Epson Research and Development, Inc. */
-/*  All rights reserved. */
-/* */
-/*---------------------------------------------------------------------------- */
-
-/* Panel: 320x240x8bpp 70Hz Color Single STN 8-bit (PCLK=6.250MHz) (Format 2) */
-
-#define S1D_DISPLAY_WIDTH           320
-#define S1D_DISPLAY_HEIGHT          240
-#define S1D_DISPLAY_BPP             8
-#define S1D_DISPLAY_SCANLINE_BYTES  320
-#define S1D_PHYSICAL_VMEM_ADDR      0x800A0000L
-#define S1D_PHYSICAL_VMEM_SIZE      0x14000L
-#define S1D_PHYSICAL_REG_ADDR       0x80080000L
-#define S1D_PHYSICAL_REG_SIZE       0x100
-#define S1D_DISPLAY_PCLK            6250
-#define S1D_PALETTE_SIZE            256
-#define S1D_REGDELAYOFF             0xFFFE
-#define S1D_REGDELAYON              0xFFFF
-
-#define S1D_WRITE_PALETTE(p,i,r,g,b)  \
-{  \
-    ((volatile S1D_VALUE*)(p))[0x0A/sizeof(S1D_VALUE)] = (S1D_VALUE)((r)>>4);  \
-    ((volatile S1D_VALUE*)(p))[0x09/sizeof(S1D_VALUE)] = (S1D_VALUE)((g)>>4);  \
-    ((volatile S1D_VALUE*)(p))[0x08/sizeof(S1D_VALUE)] = (S1D_VALUE)((b)>>4);  \
-    ((volatile S1D_VALUE*)(p))[0x0B/sizeof(S1D_VALUE)] = (S1D_VALUE)(i);  \
-}
-
-#define S1D_READ_PALETTE(p,i,r,g,b)  \
-{  \
-    ((volatile S1D_VALUE*)(p))[0x0F/sizeof(S1D_VALUE)] = (S1D_VALUE)(i);  \
-    r = ((volatile S1D_VALUE*)(p))[0x0E/sizeof(S1D_VALUE)];  \
-    g = ((volatile S1D_VALUE*)(p))[0x0D/sizeof(S1D_VALUE)];  \
-    b = ((volatile S1D_VALUE*)(p))[0x0C/sizeof(S1D_VALUE)];  \
-}
-
-typedef unsigned short S1D_INDEX;
-typedef unsigned char  S1D_VALUE;
-
-
-typedef struct
-{
-    S1D_INDEX Index;
-    S1D_VALUE Value;
-} S1D_REGS;
-
-static S1D_REGS aS1DRegs[] =
-{
-	{0x04,0x10},	/* BUSCLK MEMCLK Config Register */
-#if 0
-	{0x05,0x32},	/* PCLK Config  Register  */
-#endif
-	{0x10,0xD0},	/* PANEL Type Register */
-	{0x11,0x00},	/* MOD Rate Register */
-#if 0
-	{0x12,0x34},	/* Horizontal Total Register */
-#endif
-	{0x14,0x27},	/* Horizontal Display Period Register */
-	{0x16,0x00},	/* Horizontal Display Period Start Pos Register 0 */
-	{0x17,0x00},	/* Horizontal Display Period Start Pos Register 1 */
-	{0x18,0xF0},	/* Vertical Total Register 0  */
-	{0x19,0x00},	/* Vertical Total Register 1 */
-	{0x1C,0xEF},	/* Vertical Display Period Register 0 */
-	{0x1D,0x00},	/* Vertical Display Period Register 1 */
-	{0x1E,0x00},	/* Vertical Display Period Start Pos Register 0 */
-	{0x1F,0x00},	/* Vertical Display Period Start Pos Register 1 */
-	{0x20,0x87},	/* Horizontal Sync Pulse Width Register */
-	{0x22,0x00},	/* Horizontal Sync Pulse Start Pos Register 0 */
-	{0x23,0x00},	/* Horizontal Sync Pulse Start Pos Register 1 */
-	{0x24,0x80},	/* Vertical Sync Pulse Width Register */
-	{0x26,0x01},	/* Vertical Sync Pulse Start Pos Register 0 */
-	{0x27,0x00},	/* Vertical Sync Pulse Start Pos Register 1 */
-	{0x70,0x83},	/* Display Mode Register */
-	{0x71,0x00},	/* Special Effects Register */
-	{0x74,0x00},	/* Main Window Display Start Address Register 0 */
-	{0x75,0x00},	/* Main Window Display Start Address Register 1 */
-	{0x76,0x00},	/* Main Window Display Start Address Register 2 */
-	{0x78,0x50},	/* Main Window Address Offset Register 0 */
-	{0x79,0x00},	/* Main Window Address Offset Register 1 */
-	{0x7C,0x00},	/* Sub Window Display Start Address Register 0 */
-	{0x7D,0x00},	/* Sub Window Display Start Address Register 1 */
-	{0x7E,0x00},	/* Sub Window Display Start Address Register 2 */
-	{0x80,0x50},	/* Sub Window Address Offset Register 0 */
-	{0x81,0x00},	/* Sub Window Address Offset Register 1 */
-	{0x84,0x00},	/* Sub Window X Start Pos Register 0 */
-	{0x85,0x00},	/* Sub Window X Start Pos Register 1 */
-	{0x88,0x00},	/* Sub Window Y Start Pos Register 0 */
-	{0x89,0x00},	/* Sub Window Y Start Pos Register 1 */
-	{0x8C,0x4F},	/* Sub Window X End Pos Register 0 */
-	{0x8D,0x00},	/* Sub Window X End Pos Register 1 */
-	{0x90,0xEF},	/* Sub Window Y End Pos Register 0 */
-	{0x91,0x00},	/* Sub Window Y End Pos Register 1 */
-	{0xA0,0x00},	/* Power Save Config Register */
-	{0xA1,0x00},	/* CPU Access Control Register */
-	{0xA2,0x00},	/* Software Reset Register */
-	{0xA3,0x00},	/* BIG Endian Support Register */
-	{0xA4,0x00},	/* Scratch Pad Register 0 */
-	{0xA5,0x00},	/* Scratch Pad Register 1 */
-	{0xA8,0x01},	/* GPIO Config Register 0 */
-	{0xA9,0x80},	/* GPIO Config Register 1 */
-	{0xAC,0x01},	/* GPIO Status Control Register 0 */
-	{0xAD,0x00},	/* GPIO Status Control Register 1 */
-	{0xB0,0x10},	/* PWM CV Clock Control Register */
-	{0xB1,0x80},	/* PWM CV Clock Config Register */
-	{0xB2,0x00},	/* CV Clock Burst Length Register */
-	{0xB3,0xA0},	/* PWM Clock Duty Cycle Register */
-	{0xAD,0x80},	/* reset seq */
-	{0x70,0x03},	/*  */
-};
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 842a2fd78..aad61273e 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -139,7 +139,7 @@ static  block_dev_desc_t ide_dev_desc[CFG_IDE_MAXDEVICE];
 /* ------------------------------------------------------------------------- */
 
 #ifdef CONFIG_IDE_LED
-#if !defined(CONFIG_KUP4K) && !defined(CONFIG_HMI10)
+#if !defined(CONFIG_KUP4K) &&  !defined(CONFIG_KUP4X) &&!defined(CONFIG_BMS2003)
 static void  ide_led   (uchar led, uchar status);
 #else
 extern void  ide_led   (uchar led, uchar status);
@@ -1537,7 +1537,11 @@ static void ide_reset (void)
 
 /* ------------------------------------------------------------------------- */
 
-#if defined(CONFIG_IDE_LED) && !defined(CONFIG_AMIGAONEG3SE) && !defined(CONFIG_KUP4K) && !defined(CONFIG_HMI10)
+#if defined(CONFIG_IDE_LED) && \
+   !defined(CONFIG_AMIGAONEG3SE) && \
+   !defined(CONFIG_KUP4K) && \
+   !defined(CONFIG_KUP4X) && \
+   !defined(CONFIG_HMI10)
 
 static	uchar	led_buffer = 0;		/* Buffer for current LED status	*/
 
diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c
index cb4e4c622..963f98f10 100644
--- a/common/cmd_pcmcia.c
+++ b/common/cmd_pcmcia.c
@@ -2125,11 +2125,11 @@ done:
 #endif	/* R360MPI */
 
 /* -------------------------------------------------------------------- */
-/* KUP4K Board								*/
+/* KUP4K and KUP4X Boards								*/
 /* -------------------------------------------------------------------- */
-#if defined(CONFIG_KUP4K)
+#if defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)
 
-#define PCMCIA_BOARD_MSG "KUP4K"
+#define PCMCIA_BOARD_MSG "KUP"
 
 #define KUP4K_PCMCIA_B_3V3 (0x00020000)
 
@@ -2337,7 +2337,7 @@ static int voltage_set(int slot, int vcc, int vpp)
 	return (0);
 }
 
-#endif	/* KUP4K */
+#endif	/* KUP4K || KUP4X */
 
 
 /* -------------------------------------------------------------------- */
diff --git a/include/commproc.h b/include/commproc.h
index 11f31e9da..9facd771c 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -980,10 +980,10 @@ typedef struct scc_enet {
 
 #endif	/* CONFIG_IVMS8, CONFIG_IVML24 */
 
-/***  KUP4K  *********************************************************/
-/* The KUP4K uses the FEC on a MPC855T for Ethernet */
+/***  KUP4K, KUP4X ****************************************************/
+/* The KUP4 boards uses the FEC on a MPC8xx for Ethernet */
 
-#if defined(CONFIG_KUP4K)
+#if defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)
 
 #define	FEC_ENET	/* use FEC for EThernet */
 #undef	SCC_ENET
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index 962a4686f..d6aa8e103 100644
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000, 2001, 2002
+ * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
  *
@@ -13,7 +13,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -38,7 +38,7 @@
 #define CONFIG_MPC855		1	/* This is a MPC855 CPU		*/
 #define CONFIG_KUP4K		1	/* ...on a KUP4K module */
 
-#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
+#define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 #undef	CONFIG_8xx_CONS_SMC2
 #undef	CONFIG_8xx_CONS_NONE
 #define CONFIG_BAUDRATE		115200	/* console baudrate		*/
@@ -48,7 +48,7 @@
 #define CONFIG_BOOTDELAY	1	/* autoboot after 1 second	*/
 #endif
 
-#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
+#define CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
 
 #define CONFIG_BOARD_TYPES	1	/* support board types		*/
 
@@ -56,35 +56,38 @@
 #undef	CONFIG_BOOTARGS
 
 
-#define	CONFIG_EXTRA_ENV_SETTINGS					  \
-"slot_a_boot=setenv bootargs root=/dev/hda2 ip=off panic=1;\
- diskboot 200000 0:1; bootm 200000\0"                                     \
-"slot_b_boot=setenv bootargs root=/dev/hda2 ip=off panic=1;\
- diskboot 200000 2:1; bootm 200000\0"                                     \
-"nfs_boot=dhcp; run nfsargs addip; bootm 200000\0"                        \
-"panic_boot=echo No Bootdevice !!! reset\0"                               \
-"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(nfsip):$(rootpath)\0" \
-"ramargs=setenv bootargs root=/dev/ram rw\0"			          \
-"addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(nfsip):$(gatewayip)\
-:$(netmask):$(hostname):$(netdev):off panic=1\0"                          \
-"netdev=eth0\0"                                                           \
-"load=tftp 200000 bootloader.bitmap;tftp 100000 u-boot.bin\0"             \
-"update=protect off 1:0-8;era 1:0-8;cp.b 100000 40000000 $(filesize);\
-cp.b 200000 40040000 14000\0"                                                   \
-"nfsip=192.168.2.19\0"
+#define CONFIG_EXTRA_ENV_SETTINGS						\
+"slot_a_boot=setenv bootargs root=/dev/hda2 ip=off;"				\
+ "run addhw; diskboot 200000 0:1; bootm 200000\0"				\
+"slot_b_boot=setenv bootargs root=/dev/hda2 ip=off;"				\
+ "run addhw; diskboot 200000 2:1; bootm 200000\0"				\
+"nfs_boot=dhcp; run nfsargs addip addhw; bootm 200000\0"			\
+"panic_boot=echo No Bootdevice !!! reset\0"					\
+"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath)\0"	\
+"ramargs=setenv bootargs root=/dev/ram rw\0"					\
+"addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip)"	\
+ ":$(netmask):$(hostname):$(netdev):off\0"					\
+"addhw=setenv bootargs $(bootargs) hw=$(hw) key1=$(key1) panic=1\0"		\
+"netdev=eth0\0"									\
+"contrast=55\0"									\
+"silent=1\0"									\
+"load=tftp 200000 bootloader-4k.bitmap;tftp 100000 bootloader-4k.bin\0"		\
+"update=protect off 1:0-5;era 1:0-5;cp.b 100000 40000000 $(filesize);"		\
+ "cp.b 200000 40040000 14000\0"
 
 #define CONFIG_BOOTCOMMAND  \
     "run slot_a_boot;run slot_b_boot;run nfs_boot;run panic_boot"
 
 
-#define CONFIG_MISC_INIT_R  1
+#define CONFIG_MISC_INIT_R	1
+#define CONFIG_MISC_INIT_F	1
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
-#define	CONFIG_STATUS_LED	1	/* Status LED enabled		*/
+#define CONFIG_STATUS_LED	1	/* Status LED enabled		*/
 
 #undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
 
@@ -93,10 +96,14 @@ cp.b 200000 40040000 14000\0"
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 
-#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
+#define CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
-#define CONFIG_ETHADDR                  00:0B:64:00:00:00 /* our OUI from IEEE */
-#define CONFIG_KUP4K_LOGO               0x40040000  /* Address of logo bitmap */
+#define CONFIG_HARD_I2C
+#define CFG_I2C_SPEED	40000
+#define CFG_I2C_SLAVE	0x7F
+
+#define CONFIG_ETHADDR			00:0B:64:00:00:00 /* our OUI from IEEE */
+#define CONFIG_KUP4K_LOGO		0x40040000  /* Address of logo bitmap */
 
 /* Define to allow the user to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -104,6 +111,7 @@ cp.b 200000 40040000 14000\0"
 #define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
 				CFG_CMD_DHCP	| \
 				CFG_CMD_IDE	| \
+				CFG_CMD_I2C	| \
 				CFG_CMD_DATE	)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -112,25 +120,25 @@ cp.b 200000 40040000 14000\0"
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
 #define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CFG_MEMTEST_START	0x000400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x002C00000	/* 4 ... 44 MB in DRAM	*/
 
-#define	CFG_LOAD_ADDR		0x200000	/* default load address	*/
+#define CFG_LOAD_ADDR		0x200000	/* default load address */
 
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
 
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 115200 }
 
 #define CFG_CONSOLE_INFO_QUIET 1
 
@@ -148,42 +156,42 @@ cp.b 200000 40040000 14000\0"
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
-#define	CFG_SDRAM_BASE		0x00000000
+#define CFG_SDRAM_BASE		0x00000000
 #define CFG_FLASH_BASE		0x40000000
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
 #define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 #define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
+#define CFG_MAX_FLASH_SECT	19	/* max number of sectors on one chip	*/
 
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE       0x8000
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_OFFSET		0x30000 /*   Offset   of Environment Sector	*/
+#define CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
+#define CFG_ENV_SECT_SIZE	0x10000
 
 /* Address and size of Redundant Environment Sector	*/
 #if 0
@@ -195,7 +203,7 @@ cp.b 200000 40040000 14000\0"
  */
 #if 0
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CFG_HWINFO_SIZE		0x00000040	/* size	  of HW Info block */
 #define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
 #endif
 /*-----------------------------------------------------------------------
@@ -275,7 +283,7 @@ cp.b 200000 40040000 14000\0"
  */
 
 /* KUP4K use both slots, SLOT_A as "primary". */
-#define	CONFIG_PCMCIA_SLOT_A 1
+#define CONFIG_PCMCIA_SLOT_A 1
 
 #define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
 #define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
@@ -293,10 +301,10 @@ cp.b 200000 40040000 14000\0"
  *-----------------------------------------------------------------------
  */
 
-#define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
+#define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
 
-#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
-#define CONFIG_IDE_LED			1   /* LED   for ide supported	*/
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
+#define CONFIG_IDE_LED		1	/* LED	 for ide supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
 #define CFG_IDE_MAXBUS		2
@@ -323,7 +331,7 @@ cp.b 200000 40040000 14000\0"
  *-----------------------------------------------------------------------
  *
  */
-#define CFG_DER	0
+#define CFG_DER 0
 
 /*
  * Init Memory Controller:
@@ -350,29 +358,9 @@ cp.b 200000 40040000 14000\0"
 #define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
 
 
-/*
- * BR2/3 and OR2/3 (SDRAM)
- *
- */
-#define SDRAM_BASE1_PRELIM	0x00000000	/* SDRAM bank #0	*/
-#define SDRAM_BASE2_PRELIM	0x20000000	/* SDRAM bank #1	*/
-#define SDRAM_BASE3_PRELIM	0x30000000	/* SDRAM bank #2	*/
-#define	SDRAM_MAX_SIZE		0x04000000	/* max 648 MB per bank	*/
-
 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
 #define CFG_OR_TIMING_SDRAM	0x00000A00
 
-#if 0
-#define CFG_OR1_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR1_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-#define CFG_OR3_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
-#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-#endif
-
 
 /*
  * Memory Periodic Timer Prescaler
@@ -388,11 +376,11 @@ cp.b 200000 40040000 14000\0"
  *	gclk	  CPU clock (not bus clock!)
  *	Trefresh  Refresh cycle * 4 (four word bursts used)
  *
- * 4096  Rows from SDRAM example configuration
- * 1000  factor s -> ms
- *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
- *    4  Number of refresh cycles per period
- *   64  Refresh cycle in ms per number of rows
+ * 4096	 Rows from SDRAM example configuration
+ * 1000	 factor s -> ms
+ *   32	 PTP (pre-divider from MPTPR) from SDRAM example configuration
+ *    4	 Number of refresh cycles per period
+ *   64	 Refresh cycle in ms per number of rows
  * --------------------------------------------
  * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
  *
@@ -428,7 +416,7 @@ cp.b 200000 40040000 14000\0"
  *
  * Boot Flags
  */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
 
@@ -437,6 +425,6 @@ cp.b 200000 40040000 14000\0"
 #define CONFIG_AUTOBOOT_PROMPT		"Boote in %d Sekunden - stop mit \"2\"\n"
 #endif
 #define CONFIG_AUTOBOOT_STOP_STR	"." /* easy to stop for now */
-
+#define CONFIG_SILENT_CONSOLE	1
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h
new file mode 100644
index 000000000..4451f2a0e
--- /dev/null
+++ b/include/configs/KUP4X.h
@@ -0,0 +1,389 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ * Derived from ../tqm8xx/tqm8xx.c
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC859T		1	/* This is a MPC859T CPU		*/
+#define CONFIG_KUP4X		1	/* ...on a KUP4X module			*/
+
+#define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1			*/
+#undef	CONFIG_8xx_CONS_SMC2
+#undef	CONFIG_8xx_CONS_NONE
+#define CONFIG_BAUDRATE		115200	/* console baudrate			*/
+#if 0
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled			*/
+#else
+#define CONFIG_BOOTDELAY	1	/* autoboot after 1 second		*/
+#endif
+
+#define CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz	*/
+
+#define CONFIG_BOARD_TYPES	1	/* support board types			*/
+
+#define CFG_8XX_FACT		8	/* Multiply by 8			*/
+#define CFG_8XX_XIN		16000000	/* 16 MHz in			*/
+
+
+#define MPC8XX_HZ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
+
+/* should ALWAYS define this, measure_gclk in speed.c is unreliable */
+/* in general, we always know this for FADS+new ADS anyway */
+#define CONFIG_8xx_GCLK_FREQ	 MPC8XX_HZ
+
+
+#undef	CONFIG_BOOTARGS
+
+
+#define CONFIG_EXTRA_ENV_SETTINGS						\
+"slot_a_boot=setenv bootargs root=/dev/hda2 ip=off;"				\
+  "run addhw;diskboot 200000 0:1;bootm 200000\0"				\
+"slot_b_boot=setenv bootargs root=/dev/hda2 ip=off;"				\
+ "run addhw;diskboot 200000 2:1;bootm 200000\0"					\
+"nfs_boot=dhcp;run nfsargs addip addhw;bootm 200000\0"				\
+"panic_boot=echo No Bootdevice !!! reset\0"					\
+"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath)\0"	\
+"ramargs=setenv bootargs root=/dev/ram rw\0"					\
+"addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip)"	\
+ ":$(netmask):$(hostname):$(netdev):off\0"					\
+"addhw=setenv bootargs $(bootargs) hw=$(hw) key1=$(key1) panic=1\0"		\
+"netdev=eth0\0"									\
+"silent=1\0"									\
+"load=tftp 200000 bootloader-4x.bitmap;tftp 100000 bootloader-4x.bin\0"		\
+"update=protect off 1:0-5;era 1:0-5;cp.b 100000 40000000 $(filesize);"		\
+ "cp.b 200000 40040000 14000\0"
+
+#define CONFIG_BOOTCOMMAND  \
+    "run slot_a_boot;run nfs_boot;run panic_boot"
+
+
+#define CONFIG_MISC_INIT_R	1
+#define CONFIG_MISC_INIT_F	1
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+#define CONFIG_STATUS_LED	1	/* Status LED enabled		*/
+
+#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
+
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_HARD_I2C
+#define CFG_I2C_SPEED 40000
+#define CFG_I2C_SLAVE 0x7F
+
+#define CONFIG_ETHADDR			00:0B:64:80:00:00 /* our OUI from IEEE */
+#undef CONFIG_KUP4K_LOGO
+
+/* Define to allow the user to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_IDE	)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x000400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x003C00000	/* 4 ... 60 MB in DRAM	*/
+#define CFG_LOAD_ADDR		0x200000	/* default load address */
+
+#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 115200 }
+
+#define CFG_CONSOLE_INFO_QUIET 1
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xFFF00000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0x40000000
+#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	19	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_OFFSET		0x30000 /*   Offset   of Environment Sector	*/
+#define CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/
+#define CFG_ENV_SECT_SIZE	0x10000
+
+/* Address and size of Redundant Environment Sector	*/
+#if 0
+#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif
+/*-----------------------------------------------------------------------
+ * Hardware Information Block
+ */
+#if 0
+#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CFG_HWINFO_SIZE		0x00000040	/* size	  of HW Info block */
+#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+#endif
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC00)
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control				11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30
+ *-----------------------------------------------------------------------
+ * set the PLL, the low-power modes and the reset control (15-29)
+ */
+#define CFG_PLPRCR	((CFG_8XX_FACT << PLPRCR_MFI_SHIFT) |	\
+				PLPRCR_SPLSS | PLPRCR_TEXPS)
+
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK	SCCR_EBDF00
+#define CFG_SCCR	(SCCR_TBS | SCCR_EBDF01 |  \
+			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
+			 SCCR_DFALCD00)
+
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ *
+ */
+
+/* KUP4K use both slots, SLOT_A as "primary". */
+#define CONFIG_PCMCIA_SLOT_A 1
+
+#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
+#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+
+#define PCMCIA_SOCKETS_NO 1
+#define PCMCIA_MEM_WIN_NO 8
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
+
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
+#define CONFIG_IDE_LED			1   /* LED   for ide supported	*/
+#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
+
+#define CFG_IDE_MAXBUS		1
+#define CFG_IDE_MAXDEVICE	2
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_IDE1_OFFSET	(4 * CFG_PCMCIA_MEM_SIZE)
+
+#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+
+/* Offset for data I/O			*/
+#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for normal register accesses	*/
+#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for alternate registers	*/
+#define CFG_ATA_ALT_OFFSET	0x0100
+
+
+/*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_DER 0
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+
+/*
+ * FLASH timing:
+ */
+#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+				 OR_SCY_2_CLK | OR_EHTR | OR_BI)
+
+#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
+#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+
+
+/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
+#define CFG_OR_TIMING_SDRAM	0x00000A00
+
+
+#define CFG_MPTPR 0x400
+
+/*
+ * MAMR settings for SDRAM
+ */
+#define CFG_MAMR 0x80802114
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+
+#define CONFIG_AUTOBOOT_KEYED		/* use key strings to stop autoboot	*/
+#if 0
+#define CONFIG_AUTOBOOT_PROMPT		"Boote in %d Sekunden - stop mit \"2\"\n"
+#endif
+#define CONFIG_AUTOBOOT_STOP_STR	"."	/* easy to stop for now		*/
+#define CONFIG_SILENT_CONSOLE	1
+
+#endif	/* __CONFIG_H */
diff --git a/include/status_led.h b/include/status_led.h
index 4840c4910..441b0c231 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -269,8 +269,8 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_ACTIVE	1		/* LED on for bit == 0	*/
 # define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
 
-/*****  KUP4K  ********************************************************/
-#elif defined(CONFIG_KUP4K)
+/*****  KUP4K, KUP4X  ****************************************************/
+#elif defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X) || defined(CONFIG_CCM)
 
 # define STATUS_LED_PAR		im_ioport.iop_papar
 # define STATUS_LED_DIR		im_ioport.iop_padir
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index cae7775ac..15cf67a29 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -839,6 +839,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
     defined(CONFIG_CPCI405)	|| \
     defined(CONFIG_EVB64260)	|| \
     defined(CONFIG_KUP4K)	|| \
+    defined(CONFIG_KUP4X)	|| \
     defined(CONFIG_LWMON)	|| \
     defined(CONFIG_PCU_E)	|| \
     defined(CONFIG_W7O)		|| \