1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
|
/*
* Copyright (C) 2014 Olio Devices, Inc.
* Authors: Evan Wilson <evan@oliodevices.com>
* Mattis Fjallstrom <mattis@oliodevices.com>
*
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* Modified from the original mach-omap/omap2/board-generic.c did by Paul
* to support the OMAP2+ device tree boards with an unique board file.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/opp.h>
#include <linux/cpu.h>
#include <linux/mpu.h>
#include <linux/spi/spi.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/regulator/machine.h>
#include <linux/led-lm3530.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include "common.h"
#include "omap_device.h"
#include "gpmc.h"
#include "soc.h"
#include "mux.h"
#include "pm.h"
#include "board-flash.h"
#include "common-board-devices.h"
#include "board-omap3h1.h"
#define NAND_CS 0
#define MPUIRQ_GPIO 31
#define LCD_RESET_GPIO 122
static struct mtd_partition omap3h1_nand_partitions[] = {
/* All the partition sizes are listed in terms of NAND block size */
{
.name = "X-Loader",
.offset = 0,
.size = 4 * NAND_BLOCK_SIZE,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "U-Boot",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
.size = 15 * NAND_BLOCK_SIZE,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "U-Boot Env",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
.size = 1 * NAND_BLOCK_SIZE,
},
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
.size = 40 * NAND_BLOCK_SIZE,
},
{
.name = "initramfs",
.offset = MTDPART_OFS_APPEND, /* Offset = 0xC80000 */
.size = 80 * NAND_BLOCK_SIZE,
},
{
.name = "ramdisk",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x1180000 */
.size = 40 * NAND_BLOCK_SIZE,
},
{
.name = "system",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x1680000 */
.size = 2000 * NAND_BLOCK_SIZE,
},
{
.name = "userdata",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x11180000 */
.size = MTDPART_SIZ_FULL,
},
};
static struct omap_dss_device omap3h1_lcd_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "olio_h1_panel",
.driver_name = "ili9342_panel",
.phy.dpi.data_lines = 18,
.reset_gpio = LCD_RESET_GPIO,
};
static struct omap_dss_device *omap3h1_dss_devices[] = {
&omap3h1_lcd_device,
};
static struct omap_dss_board_info omap3h1_dss_data = {
.num_devices = 1,
.devices = omap3h1_dss_devices,
.default_device = &omap3h1_lcd_device,
};
static struct spi_board_info omap3h1_spi_board_info[] __initdata = {
{
.modalias = "ili9342-spi",
.bus_num = 1,
.chip_select = 1,
.max_speed_hz = 375000,
.platform_data = &omap3h1_lcd_device,
.mode = SPI_MODE_0,
}
};
static int __init omap3h1_spi_init(void) {
spi_register_board_info(omap3h1_spi_board_info,
ARRAY_SIZE(omap3h1_spi_board_info));
return 0;
}
static struct mpu_platform_data mpu_data = {
.int_config = 0x00,
.level_shifter = 0,
.orientation = { -1, 0, 0,
0, 1, 0,
0, 0, -1 },
};
static struct lm3530_platform_data omap3h1_backlight_platform_data = {
.mode = LM3530_BL_MODE_MANUAL,
//.als_input_mode = LM3530_INPUT_ALS1,
.max_current = LM3530_FS_CURR_12mA,
//.pwm_pol_hi = true,
//.als_avrg_time = LM3530_ALS_AVRG_TIME_512ms,
.brt_ramp_law = 0,
.brt_ramp_fall = LM3530_RAMP_TIME_2s,
.brt_ramp_rise = LM3530_RAMP_TIME_2s,
//.als1_resistor_sel = LM3530_ALS_IMPD_13_53kOhm,
//.als2_resistor_sel = LM3530_ALS_IMPD_Z,
//.als_vmin = 730, /* mV */
//.als_vmax = 1020, /* mV */
.brt_val = 0x40, /* Max brightness */
};
static struct platform_device bcm20702_bluetooth_device = {
.name = "bcm20702_bluetooth",
.id = -1,
};
static struct i2c_board_info __initdata omap3h1_i2c1_board_info[] = {
{
I2C_BOARD_INFO("mpu6515", 0x68),
// This is needed for the interrupt wake. IH_GPIO_BASE changed in 3.10 kernel
//.irq = (IH_GPIO_BASE + MPUIRQ_GPIO),
.platform_data = &mpu_data,
},
{
/* Backlight */
I2C_BOARD_INFO("lm3530-led", 0x38),
.platform_data = &omap3h1_backlight_platform_data,
},
};
static int __init omap3_h1_i2c_init(void)
{
omap_register_i2c_bus(1, 400, omap3h1_i2c1_board_info, ARRAY_SIZE(omap3h1_i2c1_board_info));
return 0;
}
static struct platform_device *omap3h1_devices[] __initdata = {
&bcm20702_bluetooth_device,
};
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#endif
static void __init omap3_h1_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
omap3_h1_i2c_init();
omap_display_init(&omap3h1_dss_data);
omap_serial_init();
omap_sdrc_init(NULL, NULL);
board_nand_init(omap3h1_nand_partitions,
ARRAY_SIZE(omap3h1_nand_partitions), NAND_CS,
NAND_BUSWIDTH_16, NULL);
platform_add_devices(omap3h1_devices, ARRAY_SIZE(omap3h1_devices));
omap3h1_spi_init();
//h1_opp_init();
}
MACHINE_START(OMAP3_H1, "Olio OMAP3 H1 Board")
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_h1_init,
.init_late = omap3630_init_late,
.init_time = omap3_secure_sync32k_timer_init,
//.dt_compat = omap3_h1_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
|
