From aff2f7d90fc6553aa309db2a635d8e5d70d84916 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Sat, 26 Jan 2013 00:48:56 -0700 Subject: ARM: OMAP2420: hwmod data/PM: use hwmod to block WFI when I2C active Use the HWMOD_BLOCK_WFI flag in the hwmod data to prevent the MPU from entering WFI when the I2C devices are active. No idea why this is needed; this could certainly bear further investigation if anyone is interested. The objective here is to remove some custom code from the OMAP24xx PM code. Signed-off-by: Paul Walmsley Cc: Kevin Hilman --- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-omap2/omap_hwmod_2420_data.c') diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index b5efe58c0be..6a764af6c6d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -121,7 +121,12 @@ static struct omap_hwmod omap2420_i2c1_hwmod = { }, .class = &i2c_class, .dev_attr = &i2c_dev_attr, - .flags = HWMOD_16BIT_REG, + /* + * From mach-omap2/pm24xx.c: "Putting MPU into the WFI state + * while a transfer is active seems to cause the I2C block to + * timeout. Why? Good question." + */ + .flags = (HWMOD_16BIT_REG | HWMOD_BLOCK_WFI), }; /* I2C2 */ -- cgit v1.2.3-70-g09d2