| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: Ia7d76c3c5f7807a37a0e26d5892c0826de8faa84
|
|
We don't use display ambient mode due to significant power consumption
when display is always on.
Change-Id: I285c9d5452fad49c4825c8174d6bf859db790c26
Signed-off-by: Evan Wilson <evan@oliodevices.com>
|
|
Add alarm scheduling debugging in case issue with alarms being scheduled
in the past is seen again.
|
|
/sys/kernel/wakeup_reasons/last_resume_reason
Change-Id: I8ac568a7cb58c31decd379195de517ff3c6f9c65
Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
|
|
If we are not able to read the current time, there is no
value in attempting to schedule an alarm based on that
time. In some cases, the stack value for time can
look close enough to a future time to make it through
validity checking, but not be a valid timer event.
Change-Id: I2f29087deefb12222043d80f506cb41d89e7f9e1
Signed-off-by: Jim Wylder <jwylder@motorola.com>
|
|
in futex_requeue(..., requeue_pi=1)
If uaddr == uaddr2, then we have broken the rule of only requeueing from
a non-pi futex to a pi futex with this call. If we attempt this, then
dangling pointers may be left for rt_waiter resulting in an exploitable
condition.
This change brings futex_requeue() in line with futex_wait_requeue_pi()
which performs the same check as per commit 6f7b0a2a5c0f ("futex: Forbid
uaddr == uaddr2 in futex_wait_requeue_pi()")
[ tglx: Compare the resulting keys as well, as uaddrs might be
different depending on the mapping ]
Fixes CVE-2014-3153.
Reported-by: Pinkie Pie
Signed-off-by: Will Drewry <wad@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If QOS non-auto API is called with IRQ disabled then IRQ will
be enabled by cancell work function. This change allows to use
QOS API in IRQ disbaled context.
Change-Id: Ia60b80539b30351621e3f7c7405f8464aa705d59
Signed-off-by: Vladimir Tsunaev <vladimirt@motorola.com>
|
|
When the console is locked, as is done in OMAPLFBFlip, panic
information will not be flushed to the console. If in an oops
case, ignore the console lock and forge ahead.
Change-Id: Ic65dc76c0f2e2d5f68997bc5c2669921d80d374f
Signed-off-by: Jim Wylder <jwylder@motorola.com>
|
|
Skip suspend check if we are in a panic (oops), this allows
the pstore ramconsole to save logs for panics during suspend.
Change-Id: I8db78384f86f3f80a45948f22dff1335aa9ac5db
Signed-off-by: Jim Wylder <jwylder@motorola.com>
|
|
kernel/auditfilter.c:426: warning: this decimal constant is unsigned only in ISO C90
Signed-off-by: Raphael S. Carvalho <raphael.scarv@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Change-Id: I0be8a9f1222db527a941de29606cd47aa57b3730
|
|
Change I81addaf420f1338255c5d0638b0d244a99d777d1 introduced compile
warnings, fix these.
Change-Id: I05482a5335599ab96c0a088a7d175c8d4cf1cf69
Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
|
|
Add API log_wakeup_reason() and expose it to userspace via sysfs path
/sys/kernel/wakeup_reasons/last_resume_reason
Change-Id: I81addaf420f1338255c5d0638b0d244a99d777d1
Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
|
|
Signed-off-by: Arve Hjønnevåg <arve@android.com>
|
|
Disable PR_SET_VMA when building with !MMU
Change-Id: I896b6979b99aa61df85caf4c3ec22eb8a8204e64
Signed-off-by: Colin Cross <ccross@android.com>
|
|
Fix two bugs caused by merging anon vma_naming, a typo in
mempolicy.c and a bad merge in sys.c.
Change-Id: Ia4ced447d50573e68195e95ea2f2b4d9456b8a90
Signed-off-by: Colin Cross <ccross@android.com>
|
|
Userspace processes often have multiple allocators that each do
anonymous mmaps to get memory. When examining memory usage of
individual processes or systems as a whole, it is useful to be
able to break down the various heaps that were allocated by
each layer and examine their size, RSS, and physical memory
usage.
This patch adds a user pointer to the shared union in
vm_area_struct that points to a null terminated string inside
the user process containing a name for the vma. vmas that
point to the same address will be merged, but vmas that
point to equivalent strings at different addresses will
not be merged.
Userspace can set the name for a region of memory by calling
prctl(PR_SET_VMA, PR_SET_VMA_ANON_NAME, start, len, (unsigned long)name);
Setting the name to NULL clears it.
The names of named anonymous vmas are shown in /proc/pid/maps
as [anon:<name>] and in /proc/pid/smaps in a new "Name" field
that is only present for named vmas. If the userspace pointer
is no longer valid all or part of the name will be replaced
with "<fault>".
The idea to store a userspace pointer to reduce the complexity
within mm (at the expense of the complexity of reading
/proc/pid/mem) came from Dave Hansen. This results in no
runtime overhead in the mm subsystem other than comparing
the anon_name pointers when considering vma merging. The pointer
is stored in a union with fieds that are only used on file-backed
mappings, so it does not increase memory usage.
Change-Id: Ie2ffc0967d4ffe7ee4c70781313c7b00cf7e3092
Signed-off-by: Colin Cross <ccross@android.com>
|
|
Add a userspace visible knob to tell the VM to keep an extra amount
of memory free, by increasing the gap between each zone's min and
low watermarks.
This is useful for realtime applications that call system
calls and have a bound on the number of allocations that happen
in any short time period. In this application, extra_free_kbytes
would be left at an amount equal to or larger than than the
maximum number of allocations that happen in any burst.
It may also be useful to reduce the memory use of virtual
machines (temporarily?), in a way that does not cause memory
fragmentation like ballooning does.
[ccross]
Revived for use on old kernels where no other solution exists.
The tunable will be removed on kernels that do better at avoiding
direct reclaim.
Change-Id: I765a42be8e964bfd3e2886d1ca85a29d60c3bb3e
Signed-off-by: Rik van Riel<riel@redhat.com>
Signed-off-by: Colin Cross <ccross@android.com>
|
|
Avoid waking up every thread sleeping in a sigtimedwait call during
suspend and resume by calling a freezable blocking call. Previous
patches modified the freezer to avoid sending wakeups to threads
that are blocked in freezable blocking calls.
This call was selected to be converted to a freezable call because
it doesn't hold any locks or release any resources when interrupted
that might be needed by another freezing task or a kernel driver
during suspend, and is a common site where idle userspace tasks are
blocked.
Change-Id: Ic27469b60a67d50cdc0d0c78975951a99c25adcd
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Avoid waking up every thread sleeping in a nanosleep call during
suspend and resume by calling a freezable blocking call. Previous
patches modified the freezer to avoid sending wakeups to threads
that are blocked in freezable blocking calls.
This call was selected to be converted to a freezable call because
it doesn't hold any locks or release any resources when interrupted
that might be needed by another freezing task or a kernel driver
during suspend, and is a common site where idle userspace tasks are
blocked.
Change-Id: I93383201d4dd62130cd9a9153842d303fc2e2986
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Avoid waking up every thread sleeping in a futex_wait call during
suspend and resume by calling a freezable blocking call. Previous
patches modified the freezer to avoid sending wakeups to threads
that are blocked in freezable blocking calls.
This call was selected to be converted to a freezable call because
it doesn't hold any locks or release any resources when interrupted
that might be needed by another freezing task or a kernel driver
during suspend, and is a common site where idle userspace tasks are
blocked.
Change-Id: I9ccab9c2d201adb66c85432801cdcf43fc91e94f
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Android goes through suspend/resume very often (every few seconds when
on a busy wifi network with the screen off), and a significant portion
of the energy used to go in and out of suspend is spent in the
freezer. If a task has called freezer_do_not_count(), don't bother
waking it up. If it happens to wake up later it will call
freezer_count() and immediately enter the refrigerator.
Combined with patches to convert freezable helpers to use
freezer_do_not_count() and convert common sites where idle userspace
tasks are blocked to use the freezable helpers, this reduces the
time and energy required to suspend and resume.
Change-Id: I6ba019d24273619849af757a413271da3261d7db
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
All tasks can easily be frozen in under 10 ms, switch to using
an initial 1 ms sleep followed by exponential backoff until
8 ms. Also convert the printed time to ms instead of centiseconds.
Change-Id: I7b198b16eefb623c2b0fc45dce50d9bca320afdc
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The only existing caller to debug_check_no_locks_held calls it
with 'current' as the task, and the freezer needs to call
debug_check_no_locks_held but doesn't already have a current
task pointer, so remove the argument. It is already assuming
that the current task is relevant by dumping the current stack
trace as part of the warning.
This was originally part of 6aa9707099c (lockdep: check that
no locks held at freeze time) which was reverted in
dbf520a9d7d4.
Change-Id: Idbaf1332ce6c80dc49c1d31c324c7fbf210657c5
Original-author: Mandeep Singh Baines <msb@chromium.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Similar to hrtimer_expires_remaining, return the amount of time
remaining until alarm expiry.
Change-Id: I8c57512d619ac66bcdaf2d9ccdf0d7f74af2ff66
Signed-off-by: Todd Poynor <toddpoynor@google.com>
|
|
Start an alarmtimer with an expires time relative to the current time
of the associated clock.
Change-Id: Ifb5309a15e0d502bb4d0209ca5510a56ee7fa88c
Signed-off-by: Todd Poynor <toddpoynor@google.com>
|
|
Similar to hrtimer_forward_now, move the expires time forward to an
interval from the current time of the associated clock.
Change-Id: I73fed223321167507b6eddcb7a57d235ffcfc1be
Signed-off-by: Todd Poynor <toddpoynor@google.com>
|
|
Analogous to hrtimer_restart, restart an alarmtimer after the expires
time has already been updated (as with alarm_forward).
Change-Id: Ia2613bbb467404cb2c35c11efa772bc56294963a
Signed-off-by: Todd Poynor <toddpoynor@google.com>
|
|
Add the 'funcgraph-flat' option to the function_graph tracer to use the default
trace printing format rather than the hierarchical formatting normally used.
Change-Id: If2900bfb86e6f8f51379f56da4f6fabafa630909
Signed-off-by: Jamie Gennis <jgennis@google.com>
|
|
The tgids are tracked along side the saved_cmdlines tracking, and can be
included in trace output by enabling the 'print-tgid' trace option. This is
useful when doing post-processing of the trace data, as it allows events to be
grouped by tgid.
Change-Id: I52ed04c3a8ca7fddbb868b792ce5d21ceb76250e
Signed-off-by: Jamie Gennis <jgennis@google.com>
|
|
Change-Id: I0607b9c776acf61cb796b8572cf8cfb8b2dc1377
Signed-off-by: Jamie Gennis <jgennis@google.com>
|
|
Emulate NMIs on systems where they are not available by using timer
interrupts on other cpus. Each cpu will use its softlockup hrtimer
to check that the next cpu is processing hrtimer interrupts by
verifying that a counter is increasing.
This patch is useful on systems where the hardlockup detector is not
available due to a lack of NMIs, for example most ARM SoCs.
Without this patch any cpu stuck with interrupts disabled can
cause a hardware watchdog reset with no debugging information,
but with this patch the kernel can detect the lockup and panic,
which can result in useful debugging info.
Signed-off-by: Colin Cross <ccross@android.com>
|
|
Change-Id: I92f252414c013b018b9a392eae1ee039aa0e89dc
Signed-off-by: Todd Poynor <toddpoynor@google.com>
|
|
On non-developer devices kgdb prevents CONFIG_PANIC_TIMEOUT from
rebooting the device after a panic. Add module parameters
debug_core.break_on_exception and debug_core.break_on_panic to
allow skipping debug on panics and exceptions respectively. Both
default to true to preserve existing behavior.
Change-Id: I75dce7263e96cee069a9750920cce83dc6f98e8c
Signed-off-by: Colin Cross <ccross@android.com>
|
|
kdb expects carriage returns through the serial port to terminate
commands. Modify it to accept the first seen carriage return or
new line as a terminator, but not treat \r\n as two terminators.
Change-Id: I06166017e7703d24310eefcb71c3a7d427088db7
Signed-off-by: Colin Cross <ccross@android.com>
|
|
Move the x86_64 idle notifiers originally by Andi Kleen and Venkatesh
Pallipadi to generic.
Change-Id: Idf29cda15be151f494ff245933c12462643388d5
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
|
|
This patch adds a notifier which can be used by subsystems that may
be interested in when a task has completely died and is about to
have it's last resource freed.
The Android lowmemory killer uses this to determine when a task
it has killed has finally given up its goods.
Signed-off-by: San Mehat <san@google.com>
|
|
Signed-off-by: San Mehat <san@google.com>
|
|
Change-Id: Icaad02fe1e8856fdc2e4215f380594a5dde8e002
Signed-off-by: Arve Hjønnevåg <arve@android.com>
|
|
By default the kernel tries to keep half as much memory free at each
order as it does for one order below. This can be too agressive when
running without swap.
Change-Id: I5efc1a0b50f41ff3ac71e92d2efd175dedd54ead
Signed-off-by: Arve Hjønnevåg <arve@android.com>
|
|
Makes low-level printk work.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Rather than using explicit euid == 0 checks when trying to move
tasks into a cgroup via CFS, move permission checks into each
specific cgroup subsystem. If a subsystem does not specify a
'allow_attach' handler, then we fall back to doing our checks
the old way.
Use the 'allow_attach' handler for the 'cpu' cgroup to allow
non-root processes to add arbitrary processes to a 'cpu' cgroup
if it has the CAP_SYS_NICE capability set.
This version of the patch adds a 'allow_attach' handler instead
of reusing the 'can_attach' handler. If the 'can_attach' handler
is reused, a new cgroup that implements 'can_attach' but not
the permission checks could end up with no permission checks
at all.
Change-Id: Icfa950aa9321d1ceba362061d32dc7dfa2c64f0c
Original-Author: San Mehat <san@google.com>
Signed-off-by: Colin Cross <ccross@android.com>
|
|
Prints the time spent in suspend in the kernel log, and
keeps statistics on the time spent in suspend in
/sys/kernel/debug/suspend_time
Change-Id: Ia6b9ebe4baa0f7f5cd211c6a4f7e813aefd3fa1d
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
|
|
At times, it is necessary for boards to provide some additional information
as part of panic logs. Provide information on the board hardware as part
of panic logs.
It is safer to print this information at the very end in case something
bad happens as part of the information retrieval itself.
To use this, set global mach_panic_string to an appropriate string in the
board file.
Change-Id: Id12cdda87b0cd2940dd01d52db97e6162f671b4d
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Prints the name of the first action for a pending wakeup IRQ.
Change-Id: I36f90735c75fb7c7ab1084775ec0d0ab02336e6e
Signed-off-by: Todd Poynor <toddpoynor@google.com>
|
|
This reverts commit 9c6079aa1bfcf7e14de10b824779ce39b679bcb8.
|
|
|
|
This allows detection of init bugs in built-in drivers.
Signed-off-by: Arve Hjønnevåg <arve@android.com>
|
|
This __put_user() could be used by unprivileged processes to write into
kernel memory. The issue here is that even if copy_siginfo_to_user()
fails, the error code is not checked before __put_user() is executed.
Luckily, ptrace_peek_siginfo() has been added within the 3.10-rc cycle,
so it has not hit a stable release yet.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"Correct an ordering issue in the tick broadcast code. I really wish
we'd get compensation for pain and suffering for each line of code we
write to work around dysfunctional timer hardware."
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick: Fix tick_broadcast_pending_mask not cleared
|
