diff options
Diffstat (limited to 'net/batman-adv/soft-interface.c')
| -rw-r--r-- | net/batman-adv/soft-interface.c | 56 |
1 files changed, 54 insertions, 2 deletions
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index b9a28d2dd3e..22bc6510237 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -146,8 +146,10 @@ static int batadv_interface_tx(struct sk_buff *skb, struct batadv_bcast_packet *bcast_packet; struct vlan_ethhdr *vhdr; __be16 ethertype = __constant_htons(BATADV_ETH_P_BATMAN); - static const uint8_t stp_addr[ETH_ALEN] = {0x01, 0x80, 0xC2, 0x00, 0x00, - 0x00}; + static const uint8_t stp_addr[ETH_ALEN] = {0x01, 0x80, 0xC2, 0x00, + 0x00, 0x00}; + static const uint8_t ectp_addr[ETH_ALEN] = {0xCF, 0x00, 0x00, 0x00, + 0x00, 0x00}; unsigned int header_len = 0; int data_len = skb->len, ret; short vid __maybe_unused = -1; @@ -180,10 +182,16 @@ static int batadv_interface_tx(struct sk_buff *skb, /* don't accept stp packets. STP does not help in meshes. * better use the bridge loop avoidance ... + * + * The same goes for ECTP sent at least by some Cisco Switches, + * it might confuse the mesh when used with bridge loop avoidance. */ if (batadv_compare_eth(ethhdr->h_dest, stp_addr)) goto dropped; + if (batadv_compare_eth(ethhdr->h_dest, ectp_addr)) + goto dropped; + if (is_multicast_ether_addr(ethhdr->h_dest)) { do_bcast = true; @@ -347,7 +355,51 @@ out: return; } +/* batman-adv network devices have devices nesting below it and are a special + * "super class" of normal network devices; split their locks off into a + * separate class since they always nest. + */ +static struct lock_class_key batadv_netdev_xmit_lock_key; +static struct lock_class_key batadv_netdev_addr_lock_key; + +/** + * batadv_set_lockdep_class_one - Set lockdep class for a single tx queue + * @dev: device which owns the tx queue + * @txq: tx queue to modify + * @_unused: always NULL + */ +static void batadv_set_lockdep_class_one(struct net_device *dev, + struct netdev_queue *txq, + void *_unused) +{ + lockdep_set_class(&txq->_xmit_lock, &batadv_netdev_xmit_lock_key); +} + +/** + * batadv_set_lockdep_class - Set txq and addr_list lockdep class + * @dev: network device to modify + */ +static void batadv_set_lockdep_class(struct net_device *dev) +{ + lockdep_set_class(&dev->addr_list_lock, &batadv_netdev_addr_lock_key); + netdev_for_each_tx_queue(dev, batadv_set_lockdep_class_one, NULL); +} + +/** + * batadv_softif_init - Late stage initialization of soft interface + * @dev: registered network device to modify + * + * Returns error code on failures + */ +static int batadv_softif_init(struct net_device *dev) +{ + batadv_set_lockdep_class(dev); + + return 0; +} + static const struct net_device_ops batadv_netdev_ops = { + .ndo_init = batadv_softif_init, .ndo_open = batadv_interface_open, .ndo_stop = batadv_interface_release, .ndo_get_stats = batadv_interface_stats, |