diff options
Diffstat (limited to 'include/uapi/linux/mroute6.h')
| -rw-r--r-- | include/uapi/linux/mroute6.h | 137 | 
1 files changed, 137 insertions, 0 deletions
diff --git a/include/uapi/linux/mroute6.h b/include/uapi/linux/mroute6.h new file mode 100644 index 00000000000..3e89b5e7f9e --- /dev/null +++ b/include/uapi/linux/mroute6.h @@ -0,0 +1,137 @@ +#ifndef _UAPI__LINUX_MROUTE6_H +#define _UAPI__LINUX_MROUTE6_H + +#include <linux/types.h> +#include <linux/sockios.h> + +/* + *	Based on the MROUTING 3.5 defines primarily to keep + *	source compatibility with BSD. + * + *	See the pim6sd code for the original history. + * + *      Protocol Independent Multicast (PIM) data structures included + *      Carlos Picoto (cap@di.fc.ul.pt) + * + */ + +#define MRT6_BASE	200 +#define MRT6_INIT	(MRT6_BASE)	/* Activate the kernel mroute code 	*/ +#define MRT6_DONE	(MRT6_BASE+1)	/* Shutdown the kernel mroute		*/ +#define MRT6_ADD_MIF	(MRT6_BASE+2)	/* Add a virtual interface		*/ +#define MRT6_DEL_MIF	(MRT6_BASE+3)	/* Delete a virtual interface		*/ +#define MRT6_ADD_MFC	(MRT6_BASE+4)	/* Add a multicast forwarding entry	*/ +#define MRT6_DEL_MFC	(MRT6_BASE+5)	/* Delete a multicast forwarding entry	*/ +#define MRT6_VERSION	(MRT6_BASE+6)	/* Get the kernel multicast version	*/ +#define MRT6_ASSERT	(MRT6_BASE+7)	/* Activate PIM assert mode		*/ +#define MRT6_PIM	(MRT6_BASE+8)	/* enable PIM code			*/ +#define MRT6_TABLE	(MRT6_BASE+9)	/* Specify mroute table ID		*/ + +#define SIOCGETMIFCNT_IN6	SIOCPROTOPRIVATE	/* IP protocol privates */ +#define SIOCGETSGCNT_IN6	(SIOCPROTOPRIVATE+1) +#define SIOCGETRPF	(SIOCPROTOPRIVATE+2) + +#define MAXMIFS		32 +typedef unsigned long mifbitmap_t;	/* User mode code depends on this lot */ +typedef unsigned short mifi_t; +#define ALL_MIFS	((mifi_t)(-1)) + +#ifndef IF_SETSIZE +#define IF_SETSIZE	256 +#endif + +typedef	__u32		if_mask; +#define NIFBITS (sizeof(if_mask) * 8)        /* bits per mask */ + +#if !defined(__KERNEL__) +#if !defined(DIV_ROUND_UP) +#define	DIV_ROUND_UP(x,y)	(((x) + ((y) - 1)) / (y)) +#endif +#endif + +typedef struct if_set { +	if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)]; +} if_set; + +#define IF_SET(n, p)    ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS))) +#define IF_CLR(n, p)    ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS))) +#define IF_ISSET(n, p)  ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS))) +#define IF_COPY(f, t)   bcopy(f, t, sizeof(*(f))) +#define IF_ZERO(p)      bzero(p, sizeof(*(p))) + +/* + *	Passed by mrouted for an MRT_ADD_MIF - again we use the + *	mrouted 3.6 structures for compatibility + */ + +struct mif6ctl { +	mifi_t	mif6c_mifi;		/* Index of MIF */ +	unsigned char mif6c_flags;	/* MIFF_ flags */ +	unsigned char vifc_threshold;	/* ttl limit */ +	__u16	 mif6c_pifi;		/* the index of the physical IF */ +	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */ +}; + +#define MIFF_REGISTER	0x1	/* register vif	*/ + +/* + *	Cache manipulation structures for mrouted and PIMd + */ + +struct mf6cctl { +	struct sockaddr_in6 mf6cc_origin;		/* Origin of mcast	*/ +	struct sockaddr_in6 mf6cc_mcastgrp;		/* Group in question	*/ +	mifi_t	mf6cc_parent;			/* Where it arrived	*/ +	struct if_set mf6cc_ifset;		/* Where it is going */ +}; + +/* + *	Group count retrieval for pim6sd + */ + +struct sioc_sg_req6 { +	struct sockaddr_in6 src; +	struct sockaddr_in6 grp; +	unsigned long pktcnt; +	unsigned long bytecnt; +	unsigned long wrong_if; +}; + +/* + *	To get vif packet counts + */ + +struct sioc_mif_req6 { +	mifi_t	mifi;		/* Which iface */ +	unsigned long icount;	/* In packets */ +	unsigned long ocount;	/* Out packets */ +	unsigned long ibytes;	/* In bytes */ +	unsigned long obytes;	/* Out bytes */ +}; + +/* + *	That's all usermode folks + */ + + + +/* + * Structure used to communicate from kernel to multicast router. + * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{} + * used for IPv4 implementation). This is because this structure will be passed via an + * IPv6 raw socket, on which an application will only receiver the payload i.e the data after + * the IPv6 header and all the extension headers. (See section 3 of RFC 3542) + */ + +struct mrt6msg { +#define MRT6MSG_NOCACHE		1 +#define MRT6MSG_WRONGMIF	2 +#define MRT6MSG_WHOLEPKT	3		/* used for use level encap */ +	__u8		im6_mbz;		/* must be zero		   */ +	__u8		im6_msgtype;		/* what type of message    */ +	__u16		im6_mif;		/* mif rec'd on		   */ +	__u32		im6_pad;		/* padding for 64 bit arch */ +	struct in6_addr	im6_src, im6_dst; +}; + +#endif /* _UAPI__LINUX_MROUTE6_H */  |