4 files changed, 26 insertions, 9 deletions
diff --git a/include/linux/bfin_mac.h b/include/linux/bfin_mac.h
index 904dec7d03a..a69554ef847 100644
--- a/include/linux/bfin_mac.h
+++ b/include/linux/bfin_mac.h
@@ -24,6 +24,7 @@ struct bfin_mii_bus_platform_data {
 	const unsigned short *mac_peripherals;
 	int phy_mode;
 	unsigned int phy_mask;
+	unsigned short vlan1_mask, vlan2_mask;
 };
 
 #endif
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index f16a01081e1..bec8b82889b 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -48,8 +48,10 @@ extern int eth_validate_addr(struct net_device *dev);
 
 
 
-extern struct net_device *alloc_etherdev_mq(int sizeof_priv, unsigned int queue_count);
+extern struct net_device *alloc_etherdev_mqs(int sizeof_priv, unsigned int txqs,
+					    unsigned int rxqs);
 #define alloc_etherdev(sizeof_priv) alloc_etherdev_mq(sizeof_priv, 1)
+#define alloc_etherdev_mq(sizeof_priv, count) alloc_etherdev_mqs(sizeof_priv, count, count)
 
 /**
  * is_zero_ether_addr - Determine if give Ethernet address is all zeros.
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index de2bfe6da35..be4957cf651 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2191,11 +2191,15 @@ static inline void netif_addr_unlock_bh(struct net_device *dev)
 extern void		ether_setup(struct net_device *dev);
 
 /* Support for loadable net-drivers */
-extern struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
+extern struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name,
 				       void (*setup)(struct net_device *),
-				       unsigned int queue_count);
+				       unsigned int txqs, unsigned int rxqs);
 #define alloc_netdev(sizeof_priv, name, setup) \
-	alloc_netdev_mq(sizeof_priv, name, setup, 1)
+	alloc_netdev_mqs(sizeof_priv, name, setup, 1, 1)
+
+#define alloc_netdev_mq(sizeof_priv, name, setup, count) \
+	alloc_netdev_mqs(sizeof_priv, name, setup, count, count)
+
 extern int		register_netdev(struct net_device *dev);
 extern void		unregister_netdev(struct net_device *dev);
 
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 2b89b712565..821ffb954f1 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -148,6 +148,10 @@
  * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
  * 	destination %NL80211_ATTR_MAC on the interface identified by
  * 	%NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
+ *	%NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
+ * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
+ *	%NL80211_ATTR_MAC.
  * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
  *	the interface identified by %NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
@@ -612,7 +616,7 @@ enum nl80211_commands {
  *	consisting of a nested array.
  *
  * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
- * @NL80211_ATTR_PLINK_ACTION: action to perform on the mesh peer link.
+ * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
  * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
  * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
  * 	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
@@ -879,7 +883,9 @@ enum nl80211_commands {
  *	See &enum nl80211_key_default_types.
  *
  * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters.  These cannot be
- * changed once the mesh is active.
+ *	changed once the mesh is active.
+ * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
+ *	containing attributes from &enum nl80211_meshconf_params.
  *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -1225,8 +1231,6 @@ enum nl80211_rate_info {
  * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
  * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
  * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
- * @__NL80211_STA_INFO_AFTER_LAST: internal
- * @NL80211_STA_INFO_MAX: highest possible station info attribute
  * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
  * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
  * 	containing info as possible, see &enum nl80211_sta_info_txrate.
@@ -1236,6 +1240,11 @@ enum nl80211_rate_info {
  * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
  * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
  * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
+ * @NL80211_STA_INFO_LLID: the station's mesh LLID
+ * @NL80211_STA_INFO_PLID: the station's mesh PLID
+ * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
+ * @__NL80211_STA_INFO_AFTER_LAST: internal
+ * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
 enum nl80211_sta_info {
 	__NL80211_STA_INFO_INVALID,
@@ -1626,7 +1635,7 @@ enum nl80211_mntr_flags {
  * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
  * that it takes for an HWMP information element to propagate across the mesh
  *
- * @NL80211_MESHCONF_ROOTMODE: whether root mode is enabled or not
+ * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
  *
  * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
  * source mesh point for path selection elements.
@@ -1678,6 +1687,7 @@ enum nl80211_meshconf_params {
  * element that vendors will use to identify the path selection methods and
  * metrics in use.
  *
+ * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
  * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
  */
 enum nl80211_mesh_setup_params {