diff options
Diffstat (limited to 'include/linux/pinctrl')
| -rw-r--r-- | include/linux/pinctrl/devinfo.h | 45 | ||||
| -rw-r--r-- | include/linux/pinctrl/pinconf-generic.h | 16 | ||||
| -rw-r--r-- | include/linux/pinctrl/pinconf.h | 6 | ||||
| -rw-r--r-- | include/linux/pinctrl/pinctrl.h | 7 |
4 files changed, 69 insertions, 5 deletions
diff --git a/include/linux/pinctrl/devinfo.h b/include/linux/pinctrl/devinfo.h new file mode 100644 index 00000000000..6e5f8a985ea --- /dev/null +++ b/include/linux/pinctrl/devinfo.h @@ -0,0 +1,45 @@ +/* + * Per-device information from the pin control system. + * This is the stuff that get included into the device + * core. + * + * Copyright (C) 2012 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * This interface is used in the core to keep track of pins. + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef PINCTRL_DEVINFO_H +#define PINCTRL_DEVINFO_H + +#ifdef CONFIG_PINCTRL + +/* The device core acts as a consumer toward pinctrl */ +#include <linux/pinctrl/consumer.h> + +/** + * struct dev_pin_info - pin state container for devices + * @p: pinctrl handle for the containing device + * @default_state: the default state for the handle, if found + */ +struct dev_pin_info { + struct pinctrl *p; + struct pinctrl_state *default_state; +}; + +extern int pinctrl_bind_pins(struct device *dev); + +#else + +/* Stubs if we're not using pinctrl */ + +static inline int pinctrl_bind_pins(struct device *dev) +{ + return 0; +} + +#endif /* CONFIG_PINCTRL */ +#endif /* PINCTRL_DEVINFO_H */ diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 47a1bdd8887..72474e18f1e 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -46,7 +46,11 @@ * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source * (open emitter). Sending this config will enabale open drain mode, the * argument is ignored. - * @PIN_CONFIG_INPUT_SCHMITT_DISABLE: disable schmitt-trigger mode on the pin. + * @PIN_CONFIG_DRIVE_STRENGTH: the pin will output the current passed as + * argument. The argument is in mA. + * @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin. + * If the argument != 0, schmitt-trigger mode is enabled. If it's 0, + * schmitt-trigger mode is disabled. * @PIN_CONFIG_INPUT_SCHMITT: this will configure an input pin to run in * schmitt-trigger mode. If the schmitt-trigger has adjustable hysteresis, * the threshold value is given on a custom format as argument when @@ -58,10 +62,15 @@ * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power * supplies, the argument to this parameter (on a custom format) tells * the driver which alternative power source to use. + * @PIN_CONFIG_SLEW_RATE: if the pin can select slew rate, the argument to + * this parameter (on a custom format) tells the driver which alternative + * slew rate to use. * @PIN_CONFIG_LOW_POWER_MODE: this will configure the pin for low power * operation, if several modes of operation are supported these can be * passed in the argument on a custom form, else just use argument 1 * to indicate low power mode, argument 0 turns low power mode off. + * @PIN_CONFIG_OUTPUT: this will configure the pin in output, use argument + * 1 to indicate high level, argument 0 to indicate low level. * @PIN_CONFIG_END: this is the last enumerator for pin configurations, if * you need to pass in custom configurations to the pin controller, use * PIN_CONFIG_END+1 as the base offset. @@ -74,11 +83,14 @@ enum pin_config_param { PIN_CONFIG_DRIVE_PUSH_PULL, PIN_CONFIG_DRIVE_OPEN_DRAIN, PIN_CONFIG_DRIVE_OPEN_SOURCE, - PIN_CONFIG_INPUT_SCHMITT_DISABLE, + PIN_CONFIG_DRIVE_STRENGTH, + PIN_CONFIG_INPUT_SCHMITT_ENABLE, PIN_CONFIG_INPUT_SCHMITT, PIN_CONFIG_INPUT_DEBOUNCE, PIN_CONFIG_POWER_SOURCE, + PIN_CONFIG_SLEW_RATE, PIN_CONFIG_LOW_POWER_MODE, + PIN_CONFIG_OUTPUT, PIN_CONFIG_END = 0x7FFF, }; diff --git a/include/linux/pinctrl/pinconf.h b/include/linux/pinctrl/pinconf.h index e7a720104a4..1ad4f31ef6b 100644 --- a/include/linux/pinctrl/pinconf.h +++ b/include/linux/pinctrl/pinconf.h @@ -14,6 +14,8 @@ #ifdef CONFIG_PINCONF +#include <linux/pinctrl/machine.h> + struct pinctrl_dev; struct seq_file; @@ -28,6 +30,7 @@ struct seq_file; * @pin_config_set: configure an individual pin * @pin_config_group_get: get configurations for an entire pin group * @pin_config_group_set: configure all pins in a group + * @pin_config_group_dbg_set: optional debugfs to modify a pin configuration * @pin_config_dbg_show: optional debugfs display hook that will provide * per-device info for a certain pin in debugfs * @pin_config_group_dbg_show: optional debugfs display hook that will provide @@ -51,6 +54,9 @@ struct pinconf_ops { int (*pin_config_group_set) (struct pinctrl_dev *pctldev, unsigned selector, unsigned long config); + int (*pin_config_dbg_parse_modify) (struct pinctrl_dev *pctldev, + const char *arg, + unsigned long *config); void (*pin_config_dbg_show) (struct pinctrl_dev *pctldev, struct seq_file *s, unsigned offset); diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h index 04d6700d99a..2c2a9e8d857 100644 --- a/include/linux/pinctrl/pinctrl.h +++ b/include/linux/pinctrl/pinctrl.h @@ -118,9 +118,9 @@ struct pinctrl_desc { const char *name; struct pinctrl_pin_desc const *pins; unsigned int npins; - struct pinctrl_ops *pctlops; - struct pinmux_ops *pmxops; - struct pinconf_ops *confops; + const struct pinctrl_ops *pctlops; + const struct pinmux_ops *pmxops; + const struct pinconf_ops *confops; struct module *owner; }; @@ -154,6 +154,7 @@ struct pinctrl_dev *of_pinctrl_get(struct device_node *np) #endif /* CONFIG_OF */ extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev); +extern const char *pinctrl_dev_get_devname(struct pinctrl_dev *pctldev); extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev); #else |