diff options
Diffstat (limited to 'drivers/usb/phy/phy-msm-usb.c')
| -rw-r--r-- | drivers/usb/phy/phy-msm-usb.c | 1762 |
1 files changed, 1762 insertions, 0 deletions
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c new file mode 100644 index 00000000000..749fbf41fb6 --- /dev/null +++ b/drivers/usb/phy/phy-msm-usb.c @@ -0,0 +1,1762 @@ +/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + */ + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/uaccess.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/pm_runtime.h> + +#include <linux/usb.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/usb/gadget.h> +#include <linux/usb/hcd.h> +#include <linux/usb/msm_hsusb.h> +#include <linux/usb/msm_hsusb_hw.h> +#include <linux/regulator/consumer.h> + +#include <mach/clk.h> + +#define MSM_USB_BASE (motg->regs) +#define DRIVER_NAME "msm_otg" + +#define ULPI_IO_TIMEOUT_USEC (10 * 1000) + +#define USB_PHY_3P3_VOL_MIN 3050000 /* uV */ +#define USB_PHY_3P3_VOL_MAX 3300000 /* uV */ +#define USB_PHY_3P3_HPM_LOAD 50000 /* uA */ +#define USB_PHY_3P3_LPM_LOAD 4000 /* uA */ + +#define USB_PHY_1P8_VOL_MIN 1800000 /* uV */ +#define USB_PHY_1P8_VOL_MAX 1800000 /* uV */ +#define USB_PHY_1P8_HPM_LOAD 50000 /* uA */ +#define USB_PHY_1P8_LPM_LOAD 4000 /* uA */ + +#define USB_PHY_VDD_DIG_VOL_MIN 1000000 /* uV */ +#define USB_PHY_VDD_DIG_VOL_MAX 1320000 /* uV */ + +static struct regulator *hsusb_3p3; +static struct regulator *hsusb_1p8; +static struct regulator *hsusb_vddcx; + +static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init) +{ + int ret = 0; + + if (init) { + hsusb_vddcx = regulator_get(motg->phy.dev, "HSUSB_VDDCX"); + if (IS_ERR(hsusb_vddcx)) { + dev_err(motg->phy.dev, "unable to get hsusb vddcx\n"); + return PTR_ERR(hsusb_vddcx); + } + + ret = regulator_set_voltage(hsusb_vddcx, + USB_PHY_VDD_DIG_VOL_MIN, + USB_PHY_VDD_DIG_VOL_MAX); + if (ret) { + dev_err(motg->phy.dev, "unable to set the voltage " + "for hsusb vddcx\n"); + regulator_put(hsusb_vddcx); + return ret; + } + + ret = regulator_enable(hsusb_vddcx); + if (ret) { + dev_err(motg->phy.dev, "unable to enable hsusb vddcx\n"); + regulator_put(hsusb_vddcx); + } + } else { + ret = regulator_set_voltage(hsusb_vddcx, 0, + USB_PHY_VDD_DIG_VOL_MAX); + if (ret) + dev_err(motg->phy.dev, "unable to set the voltage " + "for hsusb vddcx\n"); + ret = regulator_disable(hsusb_vddcx); + if (ret) + dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n"); + + regulator_put(hsusb_vddcx); + } + + return ret; +} + +static int msm_hsusb_ldo_init(struct msm_otg *motg, int init) +{ + int rc = 0; + + if (init) { + hsusb_3p3 = regulator_get(motg->phy.dev, "HSUSB_3p3"); + if (IS_ERR(hsusb_3p3)) { + dev_err(motg->phy.dev, "unable to get hsusb 3p3\n"); + return PTR_ERR(hsusb_3p3); + } + + rc = regulator_set_voltage(hsusb_3p3, USB_PHY_3P3_VOL_MIN, + USB_PHY_3P3_VOL_MAX); + if (rc) { + dev_err(motg->phy.dev, "unable to set voltage level " + "for hsusb 3p3\n"); + goto put_3p3; + } + rc = regulator_enable(hsusb_3p3); + if (rc) { + dev_err(motg->phy.dev, "unable to enable the hsusb 3p3\n"); + goto put_3p3; + } + hsusb_1p8 = regulator_get(motg->phy.dev, "HSUSB_1p8"); + if (IS_ERR(hsusb_1p8)) { + dev_err(motg->phy.dev, "unable to get hsusb 1p8\n"); + rc = PTR_ERR(hsusb_1p8); + goto disable_3p3; + } + rc = regulator_set_voltage(hsusb_1p8, USB_PHY_1P8_VOL_MIN, + USB_PHY_1P8_VOL_MAX); + if (rc) { + dev_err(motg->phy.dev, "unable to set voltage level " + "for hsusb 1p8\n"); + goto put_1p8; + } + rc = regulator_enable(hsusb_1p8); + if (rc) { + dev_err(motg->phy.dev, "unable to enable the hsusb 1p8\n"); + goto put_1p8; + } + + return 0; + } + + regulator_disable(hsusb_1p8); +put_1p8: + regulator_put(hsusb_1p8); +disable_3p3: + regulator_disable(hsusb_3p3); +put_3p3: + regulator_put(hsusb_3p3); + return rc; +} + +#ifdef CONFIG_PM_SLEEP +#define USB_PHY_SUSP_DIG_VOL 500000 +static int msm_hsusb_config_vddcx(int high) +{ + int max_vol = USB_PHY_VDD_DIG_VOL_MAX; + int min_vol; + int ret; + + if (high) + min_vol = USB_PHY_VDD_DIG_VOL_MIN; + else + min_vol = USB_PHY_SUSP_DIG_VOL; + + ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol); + if (ret) { + pr_err("%s: unable to set the voltage for regulator " + "HSUSB_VDDCX\n", __func__); + return ret; + } + + pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol); + + return ret; +} +#endif + +static int msm_hsusb_ldo_set_mode(int on) +{ + int ret = 0; + + if (!hsusb_1p8 || IS_ERR(hsusb_1p8)) { + pr_err("%s: HSUSB_1p8 is not initialized\n", __func__); + return -ENODEV; + } + + if (!hsusb_3p3 || IS_ERR(hsusb_3p3)) { + pr_err("%s: HSUSB_3p3 is not initialized\n", __func__); + return -ENODEV; + } + + if (on) { + ret = regulator_set_optimum_mode(hsusb_1p8, + USB_PHY_1P8_HPM_LOAD); + if (ret < 0) { + pr_err("%s: Unable to set HPM of the regulator " + "HSUSB_1p8\n", __func__); + return ret; + } + ret = regulator_set_optimum_mode(hsusb_3p3, + USB_PHY_3P3_HPM_LOAD); + if (ret < 0) { + pr_err("%s: Unable to set HPM of the regulator " + "HSUSB_3p3\n", __func__); + regulator_set_optimum_mode(hsusb_1p8, + USB_PHY_1P8_LPM_LOAD); + return ret; + } + } else { + ret = regulator_set_optimum_mode(hsusb_1p8, + USB_PHY_1P8_LPM_LOAD); + if (ret < 0) + pr_err("%s: Unable to set LPM of the regulator " + "HSUSB_1p8\n", __func__); + ret = regulator_set_optimum_mode(hsusb_3p3, + USB_PHY_3P3_LPM_LOAD); + if (ret < 0) + pr_err("%s: Unable to set LPM of the regulator " + "HSUSB_3p3\n", __func__); + } + + pr_debug("reg (%s)\n", on ? "HPM" : "LPM"); + return ret < 0 ? ret : 0; +} + +static int ulpi_read(struct usb_phy *phy, u32 reg) +{ + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); + int cnt = 0; + + /* initiate read operation */ + writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg), + USB_ULPI_VIEWPORT); + + /* wait for completion */ + while (cnt < ULPI_IO_TIMEOUT_USEC) { + if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN)) + break; + udelay(1); + cnt++; + } + + if (cnt >= ULPI_IO_TIMEOUT_USEC) { + dev_err(phy->dev, "ulpi_read: timeout %08x\n", + readl(USB_ULPI_VIEWPORT)); + return -ETIMEDOUT; + } + return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT)); +} + +static int ulpi_write(struct usb_phy *phy, u32 val, u32 reg) +{ + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); + int cnt = 0; + + /* initiate write operation */ + writel(ULPI_RUN | ULPI_WRITE | + ULPI_ADDR(reg) | ULPI_DATA(val), + USB_ULPI_VIEWPORT); + + /* wait for completion */ + while (cnt < ULPI_IO_TIMEOUT_USEC) { + if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN)) + break; + udelay(1); + cnt++; + } + + if (cnt >= ULPI_IO_TIMEOUT_USEC) { + dev_err(phy->dev, "ulpi_write: timeout\n"); + return -ETIMEDOUT; + } + return 0; +} + +static struct usb_phy_io_ops msm_otg_io_ops = { + .read = ulpi_read, + .write = ulpi_write, +}; + +static void ulpi_init(struct msm_otg *motg) +{ + struct msm_otg_platform_data *pdata = motg->pdata; + int *seq = pdata->phy_init_seq; + + if (!seq) + return; + + while (seq[0] >= 0) { + dev_vdbg(motg->phy.dev, "ulpi: write 0x%02x to 0x%02x\n", + seq[0], seq[1]); + ulpi_write(&motg->phy, seq[0], seq[1]); + seq += 2; + } +} + +static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert) +{ + int ret; + + if (assert) { + ret = clk_reset(motg->clk, CLK_RESET_ASSERT); + if (ret) + dev_err(motg->phy.dev, "usb hs_clk assert failed\n"); + } else { + ret = clk_reset(motg->clk, CLK_RESET_DEASSERT); + if (ret) + dev_err(motg->phy.dev, "usb hs_clk deassert failed\n"); + } + return ret; +} + +static int msm_otg_phy_clk_reset(struct msm_otg *motg) +{ + int ret; + + ret = clk_reset(motg->phy_reset_clk, CLK_RESET_ASSERT); + if (ret) { + dev_err(motg->phy.dev, "usb phy clk assert failed\n"); + return ret; + } + usleep_range(10000, 12000); + ret = clk_reset(motg->phy_reset_clk, CLK_RESET_DEASSERT); + if (ret) + dev_err(motg->phy.dev, "usb phy clk deassert failed\n"); + return ret; +} + +static int msm_otg_phy_reset(struct msm_otg *motg) +{ + u32 val; + int ret; + int retries; + + ret = msm_otg_link_clk_reset(motg, 1); + if (ret) + return ret; + ret = msm_otg_phy_clk_reset(motg); + if (ret) + return ret; + ret = msm_otg_link_clk_reset(motg, 0); + if (ret) + return ret; + + val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK; + writel(val | PORTSC_PTS_ULPI, USB_PORTSC); + + for (retries = 3; retries > 0; retries--) { + ret = ulpi_write(&motg->phy, ULPI_FUNC_CTRL_SUSPENDM, + ULPI_CLR(ULPI_FUNC_CTRL)); + if (!ret) + break; + ret = msm_otg_phy_clk_reset(motg); + if (ret) + return ret; + } + if (!retries) + return -ETIMEDOUT; + + /* This reset calibrates the phy, if the above write succeeded */ + ret = msm_otg_phy_clk_reset(motg); + if (ret) + return ret; + + for (retries = 3; retries > 0; retries--) { + ret = ulpi_read(&motg->phy, ULPI_DEBUG); + if (ret != -ETIMEDOUT) + break; + ret = msm_otg_phy_clk_reset(motg); + if (ret) + return ret; + } + if (!retries) + return -ETIMEDOUT; + + dev_info(motg->phy.dev, "phy_reset: success\n"); + return 0; +} + +#define LINK_RESET_TIMEOUT_USEC (250 * 1000) +static int msm_otg_reset(struct usb_phy *phy) +{ + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); + struct msm_otg_platform_data *pdata = motg->pdata; + int cnt = 0; + int ret; + u32 val = 0; + u32 ulpi_val = 0; + + ret = msm_otg_phy_reset(motg); + if (ret) { + dev_err(phy->dev, "phy_reset failed\n"); + return ret; + } + + ulpi_init(motg); + + writel(USBCMD_RESET, USB_USBCMD); + while (cnt < LINK_RESET_TIMEOUT_USEC) { + if (!(readl(USB_USBCMD) & USBCMD_RESET)) + break; + udelay(1); + cnt++; + } + if (cnt >= LINK_RESET_TIMEOUT_USEC) + return -ETIMEDOUT; + + /* select ULPI phy */ + writel(0x80000000, USB_PORTSC); + + msleep(100); + + writel(0x0, USB_AHBBURST); + writel(0x00, USB_AHBMODE); + + if (pdata->otg_control == OTG_PHY_CONTROL) { + val = readl(USB_OTGSC); + if (pdata->mode == USB_OTG) { + ulpi_val = ULPI_INT_IDGRD | ULPI_INT_SESS_VALID; + val |= OTGSC_IDIE | OTGSC_BSVIE; + } else if (pdata->mode == USB_PERIPHERAL) { + ulpi_val = ULPI_INT_SESS_VALID; + val |= OTGSC_BSVIE; + } + writel(val, USB_OTGSC); + ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_RISE); + ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL); + } + + return 0; +} + +#define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000) +#define PHY_RESUME_TIMEOUT_USEC (100 * 1000) + +#ifdef CONFIG_PM_SLEEP +static int msm_otg_suspend(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + struct usb_bus *bus = phy->otg->host; + struct msm_otg_platform_data *pdata = motg->pdata; + int cnt = 0; + + if (atomic_read(&motg->in_lpm)) + return 0; + + disable_irq(motg->irq); + /* + * Chipidea 45-nm PHY suspend sequence: + * + * Interrupt Latch Register auto-clear feature is not present + * in all PHY versions. Latch register is clear on read type. + * Clear latch register to avoid spurious wakeup from + * low power mode (LPM). + * + * PHY comparators are disabled when PHY enters into low power + * mode (LPM). Keep PHY comparators ON in LPM only when we expect + * VBUS/Id notifications from USB PHY. Otherwise turn off USB + * PHY comparators. This save significant amount of power. + * + * PLL is not turned off when PHY enters into low power mode (LPM). + * Disable PLL for maximum power savings. + */ + + if (motg->pdata->phy_type == CI_45NM_INTEGRATED_PHY) { + ulpi_read(phy, 0x14); + if (pdata->otg_control == OTG_PHY_CONTROL) + ulpi_write(phy, 0x01, 0x30); + ulpi_write(phy, 0x08, 0x09); + } + + /* + * PHY may take some time or even fail to enter into low power + * mode (LPM). Hence poll for 500 msec and reset the PHY and link + * in failure case. + */ + writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC); + while (cnt < PHY_SUSPEND_TIMEOUT_USEC) { + if (readl(USB_PORTSC) & PORTSC_PHCD) + break; + udelay(1); + cnt++; + } + + if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) { + dev_err(phy->dev, "Unable to suspend PHY\n"); + msm_otg_reset(phy); + enable_irq(motg->irq); + return -ETIMEDOUT; + } + + /* + * PHY has capability to generate interrupt asynchronously in low + * power mode (LPM). This interrupt is level triggered. So USB IRQ + * line must be disabled till async interrupt enable bit is cleared + * in USBCMD register. Assert STP (ULPI interface STOP signal) to + * block data communication from PHY. + */ + writel(readl(USB_USBCMD) | ASYNC_INTR_CTRL | ULPI_STP_CTRL, USB_USBCMD); + + if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY && + motg->pdata->otg_control == OTG_PMIC_CONTROL) + writel(readl(USB_PHY_CTRL) | PHY_RETEN, USB_PHY_CTRL); + + clk_disable(motg->pclk); + clk_disable(motg->clk); + if (motg->core_clk) + clk_disable(motg->core_clk); + + if (!IS_ERR(motg->pclk_src)) + clk_disable(motg->pclk_src); + + if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY && + motg->pdata->otg_control == OTG_PMIC_CONTROL) { + msm_hsusb_ldo_set_mode(0); + msm_hsusb_config_vddcx(0); + } + + if (device_may_wakeup(phy->dev)) + enable_irq_wake(motg->irq); + if (bus) + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags); + + atomic_set(&motg->in_lpm, 1); + enable_irq(motg->irq); + + dev_info(phy->dev, "USB in low power mode\n"); + + return 0; +} + +static int msm_otg_resume(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + struct usb_bus *bus = phy->otg->host; + int cnt = 0; + unsigned temp; + + if (!atomic_read(&motg->in_lpm)) + return 0; + + if (!IS_ERR(motg->pclk_src)) + clk_enable(motg->pclk_src); + + clk_enable(motg->pclk); + clk_enable(motg->clk); + if (motg->core_clk) + clk_enable(motg->core_clk); + + if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY && + motg->pdata->otg_control == OTG_PMIC_CONTROL) { + msm_hsusb_ldo_set_mode(1); + msm_hsusb_config_vddcx(1); + writel(readl(USB_PHY_CTRL) & ~PHY_RETEN, USB_PHY_CTRL); + } + + temp = readl(USB_USBCMD); + temp &= ~ASYNC_INTR_CTRL; + temp &= ~ULPI_STP_CTRL; + writel(temp, USB_USBCMD); + + /* + * PHY comes out of low power mode (LPM) in case of wakeup + * from asynchronous interrupt. + */ + if (!(readl(USB_PORTSC) & PORTSC_PHCD)) + goto skip_phy_resume; + + writel(readl(USB_PORTSC) & ~PORTSC_PHCD, USB_PORTSC); + while (cnt < PHY_RESUME_TIMEOUT_USEC) { + if (!(readl(USB_PORTSC) & PORTSC_PHCD)) + break; + udelay(1); + cnt++; + } + + if (cnt >= PHY_RESUME_TIMEOUT_USEC) { + /* + * This is a fatal error. Reset the link and + * PHY. USB state can not be restored. Re-insertion + * of USB cable is the only way to get USB working. + */ + dev_err(phy->dev, "Unable to resume USB." + "Re-plugin the cable\n"); + msm_otg_reset(phy); + } + +skip_phy_resume: + if (device_may_wakeup(phy->dev)) + disable_irq_wake(motg->irq); + if (bus) + set_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags); + + atomic_set(&motg->in_lpm, 0); + + if (motg->async_int) { + motg->async_int = 0; + pm_runtime_put(phy->dev); + enable_irq(motg->irq); + } + + dev_info(phy->dev, "USB exited from low power mode\n"); + + return 0; +} +#endif + +static void msm_otg_notify_charger(struct msm_otg *motg, unsigned mA) +{ + if (motg->cur_power == mA) + return; + + /* TODO: Notify PMIC about available current */ + dev_info(motg->phy.dev, "Avail curr from USB = %u\n", mA); + motg->cur_power = mA; +} + +static int msm_otg_set_power(struct usb_phy *phy, unsigned mA) +{ + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); + + /* + * Gadget driver uses set_power method to notify about the + * available current based on suspend/configured states. + * + * IDEV_CHG can be drawn irrespective of suspend/un-configured + * states when CDP/ACA is connected. + */ + if (motg->chg_type == USB_SDP_CHARGER) + msm_otg_notify_charger(motg, mA); + + return 0; +} + +static void msm_otg_start_host(struct usb_phy *phy, int on) +{ + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); + struct msm_otg_platform_data *pdata = motg->pdata; + struct usb_hcd *hcd; + + if (!phy->otg->host) + return; + + hcd = bus_to_hcd(phy->otg->host); + + if (on) { + dev_dbg(phy->dev, "host on\n"); + + if (pdata->vbus_power) + pdata->vbus_power(1); + /* + * Some boards have a switch cotrolled by gpio + * to enable/disable internal HUB. Enable internal + * HUB before kicking the host. + */ + if (pdata->setup_gpio) + pdata->setup_gpio(OTG_STATE_A_HOST); +#ifdef CONFIG_USB + usb_add_hcd(hcd, hcd->irq, IRQF_SHARED); +#endif + } else { + dev_dbg(phy->dev, "host off\n"); + +#ifdef CONFIG_USB + usb_remove_hcd(hcd); +#endif + if (pdata->setup_gpio) + pdata->setup_gpio(OTG_STATE_UNDEFINED); + if (pdata->vbus_power) + pdata->vbus_power(0); + } +} + +static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + struct msm_otg *motg = container_of(otg->phy, struct msm_otg, phy); + struct usb_hcd *hcd; + + /* + * Fail host registration if this board can support + * only peripheral configuration. + */ + if (motg->pdata->mode == USB_PERIPHERAL) { + dev_info(otg->phy->dev, "Host mode is not supported\n"); + return -ENODEV; + } + + if (!host) { + if (otg->phy->state == OTG_STATE_A_HOST) { + pm_runtime_get_sync(otg->phy->dev); + msm_otg_start_host(otg->phy, 0); + otg->host = NULL; + otg->phy->state = OTG_STATE_UNDEFINED; + schedule_work(&motg->sm_work); + } else { + otg->host = NULL; + } + + return 0; + } + + hcd = bus_to_hcd(host); + hcd->power_budget = motg->pdata->power_budget; + + otg->host = host; + dev_dbg(otg->phy->dev, "host driver registered w/ tranceiver\n"); + + /* + * Kick the state machine work, if peripheral is not supported + * or peripheral is already registered with us. + */ + if (motg->pdata->mode == USB_HOST || otg->gadget) { + pm_runtime_get_sync(otg->phy->dev); + schedule_work(&motg->sm_work); + } + + return 0; +} + +static void msm_otg_start_peripheral(struct usb_phy *phy, int on) +{ + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); + struct msm_otg_platform_data *pdata = motg->pdata; + + if (!phy->otg->gadget) + return; + + if (on) { + dev_dbg(phy->dev, "gadget on\n"); + /* + * Some boards have a switch cotrolled by gpio + * to enable/disable internal HUB. Disable internal + * HUB before kicking the gadget. + */ + if (pdata->setup_gpio) + pdata->setup_gpio(OTG_STATE_B_PERIPHERAL); + usb_gadget_vbus_connect(phy->otg->gadget); + } else { + dev_dbg(phy->dev, "gadget off\n"); + usb_gadget_vbus_disconnect(phy->otg->gadget); + if (pdata->setup_gpio) + pdata->setup_gpio(OTG_STATE_UNDEFINED); + } + +} + +static int msm_otg_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + struct msm_otg *motg = container_of(otg->phy, struct msm_otg, phy); + + /* + * Fail peripheral registration if this board can support + * only host configuration. + */ + if (motg->pdata->mode == USB_HOST) { + dev_info(otg->phy->dev, "Peripheral mode is not supported\n"); + return -ENODEV; + } + + if (!gadget) { + if (otg->phy->state == OTG_STATE_B_PERIPHERAL) { + pm_runtime_get_sync(otg->phy->dev); + msm_otg_start_peripheral(otg->phy, 0); + otg->gadget = NULL; + otg->phy->state = OTG_STATE_UNDEFINED; + schedule_work(&motg->sm_work); + } else { + otg->gadget = NULL; + } + + return 0; + } + otg->gadget = gadget; + dev_dbg(otg->phy->dev, "peripheral driver registered w/ tranceiver\n"); + + /* + * Kick the state machine work, if host is not supported + * or host is already registered with us. + */ + if (motg->pdata->mode == USB_PERIPHERAL || otg->host) { + pm_runtime_get_sync(otg->phy->dev); + schedule_work(&motg->sm_work); + } + + return 0; +} + +static bool msm_chg_check_secondary_det(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + u32 chg_det; + bool ret = false; + + switch (motg->pdata->phy_type) { + case CI_45NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x34); + ret = chg_det & (1 << 4); + break; + case SNPS_28NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x87); + ret = chg_det & 1; + break; + default: + break; + } + return ret; +} + +static void msm_chg_enable_secondary_det(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + u32 chg_det; + + switch (motg->pdata->phy_type) { + case CI_45NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x34); + /* Turn off charger block */ + chg_det |= ~(1 << 1); + ulpi_write(phy, chg_det, 0x34); + udelay(20); + /* control chg block via ULPI */ + chg_det &= ~(1 << 3); + ulpi_write(phy, chg_det, 0x34); + /* put it in host mode for enabling D- source */ + chg_det &= ~(1 << 2); + ulpi_write(phy, chg_det, 0x34); + /* Turn on chg detect block */ + chg_det &= ~(1 << 1); + ulpi_write(phy, chg_det, 0x34); + udelay(20); + /* enable chg detection */ + chg_det &= ~(1 << 0); + ulpi_write(phy, chg_det, 0x34); + break; + case SNPS_28NM_INTEGRATED_PHY: + /* + * Configure DM as current source, DP as current sink + * and enable battery charging comparators. + */ + ulpi_write(phy, 0x8, 0x85); + ulpi_write(phy, 0x2, 0x85); + ulpi_write(phy, 0x1, 0x85); + break; + default: + break; + } +} + +static bool msm_chg_check_primary_det(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + u32 chg_det; + bool ret = false; + + switch (motg->pdata->phy_type) { + case CI_45NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x34); + ret = chg_det & (1 << 4); + break; + case SNPS_28NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x87); + ret = chg_det & 1; + break; + default: + break; + } + return ret; +} + +static void msm_chg_enable_primary_det(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + u32 chg_det; + + switch (motg->pdata->phy_type) { + case CI_45NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x34); + /* enable chg detection */ + chg_det &= ~(1 << 0); + ulpi_write(phy, chg_det, 0x34); + break; + case SNPS_28NM_INTEGRATED_PHY: + /* + * Configure DP as current source, DM as current sink + * and enable battery charging comparators. + */ + ulpi_write(phy, 0x2, 0x85); + ulpi_write(phy, 0x1, 0x85); + break; + default: + break; + } +} + +static bool msm_chg_check_dcd(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + u32 line_state; + bool ret = false; + + switch (motg->pdata->phy_type) { + case CI_45NM_INTEGRATED_PHY: + line_state = ulpi_read(phy, 0x15); + ret = !(line_state & 1); + break; + case SNPS_28NM_INTEGRATED_PHY: + line_state = ulpi_read(phy, 0x87); + ret = line_state & 2; + break; + default: + break; + } + return ret; +} + +static void msm_chg_disable_dcd(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + u32 chg_det; + + switch (motg->pdata->phy_type) { + case CI_45NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x34); + chg_det &= ~(1 << 5); + ulpi_write(phy, chg_det, 0x34); + break; + case SNPS_28NM_INTEGRATED_PHY: + ulpi_write(phy, 0x10, 0x86); + break; + default: + break; + } +} + +static void msm_chg_enable_dcd(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + u32 chg_det; + + switch (motg->pdata->phy_type) { + case CI_45NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x34); + /* Turn on D+ current source */ + chg_det |= (1 << 5); + ulpi_write(phy, chg_det, 0x34); + break; + case SNPS_28NM_INTEGRATED_PHY: + /* Data contact detection enable */ + ulpi_write(phy, 0x10, 0x85); + break; + default: + break; + } +} + +static void msm_chg_block_on(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + u32 func_ctrl, chg_det; + + /* put the controller in non-driving mode */ + func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL); + func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK; + func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING; + ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL); + + switch (motg->pdata->phy_type) { + case CI_45NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x34); + /* control chg block via ULPI */ + chg_det &= ~(1 << 3); + ulpi_write(phy, chg_det, 0x34); + /* Turn on chg detect block */ + chg_det &= ~(1 << 1); + ulpi_write(phy, chg_det, 0x34); + udelay(20); + break; + case SNPS_28NM_INTEGRATED_PHY: + /* Clear charger detecting control bits */ + ulpi_write(phy, 0x3F, 0x86); + /* Clear alt interrupt latch and enable bits */ + ulpi_write(phy, 0x1F, 0x92); + ulpi_write(phy, 0x1F, 0x95); + udelay(100); + break; + default: + break; + } +} + +static void msm_chg_block_off(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + u32 func_ctrl, chg_det; + + switch (motg->pdata->phy_type) { + case CI_45NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x34); + /* Turn off charger block */ + chg_det |= ~(1 << 1); + ulpi_write(phy, chg_det, 0x34); + break; + case SNPS_28NM_INTEGRATED_PHY: + /* Clear charger detecting control bits */ + ulpi_write(phy, 0x3F, 0x86); + /* Clear alt interrupt latch and enable bits */ + ulpi_write(phy, 0x1F, 0x92); + ulpi_write(phy, 0x1F, 0x95); + break; + default: + break; + } + + /* put the controller in normal mode */ + func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL); + func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK; + func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NORMAL; + ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL); +} + +#define MSM_CHG_DCD_POLL_TIME (100 * HZ/1000) /* 100 msec */ +#define MSM_CHG_DCD_MAX_RETRIES 6 /* Tdcd_tmout = 6 * 100 msec */ +#define MSM_CHG_PRIMARY_DET_TIME (40 * HZ/1000) /* TVDPSRC_ON */ +#define MSM_CHG_SECONDARY_DET_TIME (40 * HZ/1000) /* TVDMSRC_ON */ +static void msm_chg_detect_work(struct work_struct *w) +{ + struct msm_otg *motg = container_of(w, struct msm_otg, chg_work.work); + struct usb_phy *phy = &motg->phy; + bool is_dcd, tmout, vout; + unsigned long delay; + + dev_dbg(phy->dev, "chg detection work\n"); + switch (motg->chg_state) { + case USB_CHG_STATE_UNDEFINED: + pm_runtime_get_sync(phy->dev); + msm_chg_block_on(motg); + msm_chg_enable_dcd(motg); + motg->chg_state = USB_CHG_STATE_WAIT_FOR_DCD; + motg->dcd_retries = 0; + delay = MSM_CHG_DCD_POLL_TIME; + break; + case USB_CHG_STATE_WAIT_FOR_DCD: + is_dcd = msm_chg_check_dcd(motg); + tmout = ++motg->dcd_retries == MSM_CHG_DCD_MAX_RETRIES; + if (is_dcd || tmout) { + msm_chg_disable_dcd(motg); + msm_chg_enable_primary_det(motg); + delay = MSM_CHG_PRIMARY_DET_TIME; + motg->chg_state = USB_CHG_STATE_DCD_DONE; + } else { + delay = MSM_CHG_DCD_POLL_TIME; + } + break; + case USB_CHG_STATE_DCD_DONE: + vout = msm_chg_check_primary_det(motg); + if (vout) { + msm_chg_enable_secondary_det(motg); + delay = MSM_CHG_SECONDARY_DET_TIME; + motg->chg_state = USB_CHG_STATE_PRIMARY_DONE; + } else { + motg->chg_type = USB_SDP_CHARGER; + motg->chg_state = USB_CHG_STATE_DETECTED; + delay = 0; + } + break; + case USB_CHG_STATE_PRIMARY_DONE: + vout = msm_chg_check_secondary_det(motg); + if (vout) + motg->chg_type = USB_DCP_CHARGER; + else + motg->chg_type = USB_CDP_CHARGER; + motg->chg_state = USB_CHG_STATE_SECONDARY_DONE; + /* fall through */ + case USB_CHG_STATE_SECONDARY_DONE: + motg->chg_state = USB_CHG_STATE_DETECTED; + case USB_CHG_STATE_DETECTED: + msm_chg_block_off(motg); + dev_dbg(phy->dev, "charger = %d\n", motg->chg_type); + schedule_work(&motg->sm_work); + return; + default: + return; + } + + schedule_delayed_work(&motg->chg_work, delay); +} + +/* + * We support OTG, Peripheral only and Host only configurations. In case + * of OTG, mode switch (host-->peripheral/peripheral-->host) can happen + * via Id pin status or user request (debugfs). Id/BSV interrupts are not + * enabled when switch is controlled by user and default mode is supplied + * by board file, which can be changed by userspace later. + */ +static void msm_otg_init_sm(struct msm_otg *motg) +{ + struct msm_otg_platform_data *pdata = motg->pdata; + u32 otgsc = readl(USB_OTGSC); + + switch (pdata->mode) { + case USB_OTG: + if (pdata->otg_control == OTG_PHY_CONTROL) { + if (otgsc & OTGSC_ID) + set_bit(ID, &motg->inputs); + else + clear_bit(ID, &motg->inputs); + + if (otgsc & OTGSC_BSV) + set_bit(B_SESS_VLD, &motg->inputs); + else + clear_bit(B_SESS_VLD, &motg->inputs); + } else if (pdata->otg_control == OTG_USER_CONTROL) { + if (pdata->default_mode == USB_HOST) { + clear_bit(ID, &motg->inputs); + } else if (pdata->default_mode == USB_PERIPHERAL) { + set_bit(ID, &motg->inputs); + set_bit(B_SESS_VLD, &motg->inputs); + } else { + set_bit(ID, &motg->inputs); + clear_bit(B_SESS_VLD, &motg->inputs); + } + } + break; + case USB_HOST: + clear_bit(ID, &motg->inputs); + break; + case USB_PERIPHERAL: + set_bit(ID, &motg->inputs); + if (otgsc & OTGSC_BSV) + set_bit(B_SESS_VLD, &motg->inputs); + else + clear_bit(B_SESS_VLD, &motg->inputs); + break; + default: + break; + } +} + +static void msm_otg_sm_work(struct work_struct *w) +{ + struct msm_otg *motg = container_of(w, struct msm_otg, sm_work); + struct usb_otg *otg = motg->phy.otg; + + switch (otg->phy->state) { + case OTG_STATE_UNDEFINED: + dev_dbg(otg->phy->dev, "OTG_STATE_UNDEFINED state\n"); + msm_otg_reset(otg->phy); + msm_otg_init_sm(motg); + otg->phy->state = OTG_STATE_B_IDLE; + /* FALL THROUGH */ + case OTG_STATE_B_IDLE: + dev_dbg(otg->phy->dev, "OTG_STATE_B_IDLE state\n"); + if (!test_bit(ID, &motg->inputs) && otg->host) { + /* disable BSV bit */ + writel(readl(USB_OTGSC) & ~OTGSC_BSVIE, USB_OTGSC); + msm_otg_start_host(otg->phy, 1); + otg->phy->state = OTG_STATE_A_HOST; + } else if (test_bit(B_SESS_VLD, &motg->inputs)) { + switch (motg->chg_state) { + case USB_CHG_STATE_UNDEFINED: + msm_chg_detect_work(&motg->chg_work.work); + break; + case USB_CHG_STATE_DETECTED: + switch (motg->chg_type) { + case USB_DCP_CHARGER: + msm_otg_notify_charger(motg, + IDEV_CHG_MAX); + break; + case USB_CDP_CHARGER: + msm_otg_notify_charger(motg, + IDEV_CHG_MAX); + msm_otg_start_peripheral(otg->phy, 1); + otg->phy->state + = OTG_STATE_B_PERIPHERAL; + break; + case USB_SDP_CHARGER: + msm_otg_notify_charger(motg, IUNIT); + msm_otg_start_peripheral(otg->phy, 1); + otg->phy->state + = OTG_STATE_B_PERIPHERAL; + break; + default: + break; + } + break; + default: + break; + } + } else { + /* + * If charger detection work is pending, decrement + * the pm usage counter to balance with the one that + * is incremented in charger detection work. + */ + if (cancel_delayed_work_sync(&motg->chg_work)) { + pm_runtime_put_sync(otg->phy->dev); + msm_otg_reset(otg->phy); + } + msm_otg_notify_charger(motg, 0); + motg->chg_state = USB_CHG_STATE_UNDEFINED; + motg->chg_type = USB_INVALID_CHARGER; + } + pm_runtime_put_sync(otg->phy->dev); + break; + case OTG_STATE_B_PERIPHERAL: + dev_dbg(otg->phy->dev, "OTG_STATE_B_PERIPHERAL state\n"); + if (!test_bit(B_SESS_VLD, &motg->inputs) || + !test_bit(ID, &motg->inputs)) { + msm_otg_notify_charger(motg, 0); + msm_otg_start_peripheral(otg->phy, 0); + motg->chg_state = USB_CHG_STATE_UNDEFINED; + motg->chg_type = USB_INVALID_CHARGER; + otg->phy->state = OTG_STATE_B_IDLE; + msm_otg_reset(otg->phy); + schedule_work(w); + } + break; + case OTG_STATE_A_HOST: + dev_dbg(otg->phy->dev, "OTG_STATE_A_HOST state\n"); + if (test_bit(ID, &motg->inputs)) { + msm_otg_start_host(otg->phy, 0); + otg->phy->state = OTG_STATE_B_IDLE; + msm_otg_reset(otg->phy); + schedule_work(w); + } + break; + default: + break; + } +} + +static irqreturn_t msm_otg_irq(int irq, void *data) +{ + struct msm_otg *motg = data; + struct usb_phy *phy = &motg->phy; + u32 otgsc = 0; + + if (atomic_read(&motg->in_lpm)) { + disable_irq_nosync(irq); + motg->async_int = 1; + pm_runtime_get(phy->dev); + return IRQ_HANDLED; + } + + otgsc = readl(USB_OTGSC); + if (!(otgsc & (OTGSC_IDIS | OTGSC_BSVIS))) + return IRQ_NONE; + + if ((otgsc & OTGSC_IDIS) && (otgsc & OTGSC_IDIE)) { + if (otgsc & OTGSC_ID) + set_bit(ID, &motg->inputs); + else + clear_bit(ID, &motg->inputs); + dev_dbg(phy->dev, "ID set/clear\n"); + pm_runtime_get_noresume(phy->dev); + } else if ((otgsc & OTGSC_BSVIS) && (otgsc & OTGSC_BSVIE)) { + if (otgsc & OTGSC_BSV) + set_bit(B_SESS_VLD, &motg->inputs); + else + clear_bit(B_SESS_VLD, &motg->inputs); + dev_dbg(phy->dev, "BSV set/clear\n"); + pm_runtime_get_noresume(phy->dev); + } + + writel(otgsc, USB_OTGSC); + schedule_work(&motg->sm_work); + return IRQ_HANDLED; +} + +static int msm_otg_mode_show(struct seq_file *s, void *unused) +{ + struct msm_otg *motg = s->private; + struct usb_otg *otg = motg->phy.otg; + + switch (otg->phy->state) { + case OTG_STATE_A_HOST: + seq_printf(s, "host\n"); + break; + case OTG_STATE_B_PERIPHERAL: + seq_printf(s, "peripheral\n"); + break; + default: + seq_printf(s, "none\n"); + break; + } + + return 0; +} + +static int msm_otg_mode_open(struct inode *inode, struct file *file) +{ + return single_open(file, msm_otg_mode_show, inode->i_private); +} + +static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct msm_otg *motg = s->private; + char buf[16]; + struct usb_otg *otg = motg->phy.otg; + int status = count; + enum usb_mode_type req_mode; + + memset(buf, 0x00, sizeof(buf)); + + if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) { + status = -EFAULT; + goto out; + } + + if (!strncmp(buf, "host", 4)) { + req_mode = USB_HOST; + } else if (!strncmp(buf, "peripheral", 10)) { + req_mode = USB_PERIPHERAL; + } else if (!strncmp(buf, "none", 4)) { + req_mode = USB_NONE; + } else { + status = -EINVAL; + goto out; + } + + switch (req_mode) { + case USB_NONE: + switch (otg->phy->state) { + case OTG_STATE_A_HOST: + case OTG_STATE_B_PERIPHERAL: + set_bit(ID, &motg->inputs); + clear_bit(B_SESS_VLD, &motg->inputs); + break; + default: + goto out; + } + break; + case USB_PERIPHERAL: + switch (otg->phy->state) { + case OTG_STATE_B_IDLE: + case OTG_STATE_A_HOST: + set_bit(ID, &motg->inputs); + set_bit(B_SESS_VLD, &motg->inputs); + break; + default: + goto out; + } + break; + case USB_HOST: + switch (otg->phy->state) { + case OTG_STATE_B_IDLE: + case OTG_STATE_B_PERIPHERAL: + clear_bit(ID, &motg->inputs); + break; + default: + goto out; + } + break; + default: + goto out; + } + + pm_runtime_get_sync(otg->phy->dev); + schedule_work(&motg->sm_work); +out: + return status; +} + +const struct file_operations msm_otg_mode_fops = { + .open = msm_otg_mode_open, + .read = seq_read, + .write = msm_otg_mode_write, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct dentry *msm_otg_dbg_root; +static struct dentry *msm_otg_dbg_mode; + +static int msm_otg_debugfs_init(struct msm_otg *motg) +{ + msm_otg_dbg_root = debugfs_create_dir("msm_otg", NULL); + + if (!msm_otg_dbg_root || IS_ERR(msm_otg_dbg_root)) + return -ENODEV; + + msm_otg_dbg_mode = debugfs_create_file("mode", S_IRUGO | S_IWUSR, + msm_otg_dbg_root, motg, &msm_otg_mode_fops); + if (!msm_otg_dbg_mode) { + debugfs_remove(msm_otg_dbg_root); + msm_otg_dbg_root = NULL; + return -ENODEV; + } + + return 0; +} + +static void msm_otg_debugfs_cleanup(void) +{ + debugfs_remove(msm_otg_dbg_mode); + debugfs_remove(msm_otg_dbg_root); +} + +static int __init msm_otg_probe(struct platform_device *pdev) +{ + int ret = 0; + struct resource *res; + struct msm_otg *motg; + struct usb_phy *phy; + + dev_info(&pdev->dev, "msm_otg probe\n"); + if (!pdev->dev.platform_data) { + dev_err(&pdev->dev, "No platform data given. Bailing out\n"); + return -ENODEV; + } + + motg = kzalloc(sizeof(struct msm_otg), GFP_KERNEL); + if (!motg) { + dev_err(&pdev->dev, "unable to allocate msm_otg\n"); + return -ENOMEM; + } + + motg->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); + if (!motg->phy.otg) { + dev_err(&pdev->dev, "unable to allocate msm_otg\n"); + return -ENOMEM; + } + + motg->pdata = pdev->dev.platform_data; + phy = &motg->phy; + phy->dev = &pdev->dev; + + motg->phy_reset_clk = clk_get(&pdev->dev, "usb_phy_clk"); + if (IS_ERR(motg->phy_reset_clk)) { + dev_err(&pdev->dev, "failed to get usb_phy_clk\n"); + ret = PTR_ERR(motg->phy_reset_clk); + goto free_motg; + } + + motg->clk = clk_get(&pdev->dev, "usb_hs_clk"); + if (IS_ERR(motg->clk)) { + dev_err(&pdev->dev, "failed to get usb_hs_clk\n"); + ret = PTR_ERR(motg->clk); + goto put_phy_reset_clk; + } + clk_set_rate(motg->clk, 60000000); + + /* + * If USB Core is running its protocol engine based on CORE CLK, + * CORE CLK must be running at >55Mhz for correct HSUSB + * operation and USB core cannot tolerate frequency changes on + * CORE CLK. For such USB cores, vote for maximum clk frequency + * on pclk source + */ + if (motg->pdata->pclk_src_name) { + motg->pclk_src = clk_get(&pdev->dev, + motg->pdata->pclk_src_name); + if (IS_ERR(motg->pclk_src)) + goto put_clk; + clk_set_rate(motg->pclk_src, INT_MAX); + clk_enable(motg->pclk_src); + } else + motg->pclk_src = ERR_PTR(-ENOENT); + + + motg->pclk = clk_get(&pdev->dev, "usb_hs_pclk"); + if (IS_ERR(motg->pclk)) { + dev_err(&pdev->dev, "failed to get usb_hs_pclk\n"); + ret = PTR_ERR(motg->pclk); + goto put_pclk_src; + } + + /* + * USB core clock is not present on all MSM chips. This + * clock is introduced to remove the dependency on AXI + * bus frequency. + */ + motg->core_clk = clk_get(&pdev->dev, "usb_hs_core_clk"); + if (IS_ERR(motg->core_clk)) + motg->core_clk = NULL; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "failed to get platform resource mem\n"); + ret = -ENODEV; + goto put_core_clk; + } + + motg->regs = ioremap(res->start, resource_size(res)); + if (!motg->regs) { + dev_err(&pdev->dev, "ioremap failed\n"); + ret = -ENOMEM; + goto put_core_clk; + } + dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs); + + motg->irq = platform_get_irq(pdev, 0); + if (!motg->irq) { + dev_err(&pdev->dev, "platform_get_irq failed\n"); + ret = -ENODEV; + goto free_regs; + } + + clk_enable(motg->clk); + clk_enable(motg->pclk); + + ret = msm_hsusb_init_vddcx(motg, 1); + if (ret) { + dev_err(&pdev->dev, "hsusb vddcx configuration failed\n"); + goto free_regs; + } + + ret = msm_hsusb_ldo_init(motg, 1); + if (ret) { + dev_err(&pdev->dev, "hsusb vreg configuration failed\n"); + goto vddcx_exit; + } + ret = msm_hsusb_ldo_set_mode(1); + if (ret) { + dev_err(&pdev->dev, "hsusb vreg enable failed\n"); + goto ldo_exit; + } + + if (motg->core_clk) + clk_enable(motg->core_clk); + + writel(0, USB_USBINTR); + writel(0, USB_OTGSC); + + INIT_WORK(&motg->sm_work, msm_otg_sm_work); + INIT_DELAYED_WORK(&motg->chg_work, msm_chg_detect_work); + ret = request_irq(motg->irq, msm_otg_irq, IRQF_SHARED, + "msm_otg", motg); + if (ret) { + dev_err(&pdev->dev, "request irq failed\n"); + goto disable_clks; + } + + phy->init = msm_otg_reset; + phy->set_power = msm_otg_set_power; + + phy->io_ops = &msm_otg_io_ops; + + phy->otg->phy = &motg->phy; + phy->otg->set_host = msm_otg_set_host; + phy->otg->set_peripheral = msm_otg_set_peripheral; + + ret = usb_add_phy(&motg->phy, USB_PHY_TYPE_USB2); + if (ret) { + dev_err(&pdev->dev, "usb_add_phy failed\n"); + goto free_irq; + } + + platform_set_drvdata(pdev, motg); + device_init_wakeup(&pdev->dev, 1); + + if (motg->pdata->mode == USB_OTG && + motg->pdata->otg_control == OTG_USER_CONTROL) { + ret = msm_otg_debugfs_init(motg); + if (ret) + dev_dbg(&pdev->dev, "mode debugfs file is" + "not available\n"); + } + + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + + return 0; +free_irq: + free_irq(motg->irq, motg); +disable_clks: + clk_disable(motg->pclk); + clk_disable(motg->clk); +ldo_exit: + msm_hsusb_ldo_init(motg, 0); +vddcx_exit: + msm_hsusb_init_vddcx(motg, 0); +free_regs: + iounmap(motg->regs); +put_core_clk: + if (motg->core_clk) + clk_put(motg->core_clk); + clk_put(motg->pclk); +put_pclk_src: + if (!IS_ERR(motg->pclk_src)) { + clk_disable(motg->pclk_src); + clk_put(motg->pclk_src); + } +put_clk: + clk_put(motg->clk); +put_phy_reset_clk: + clk_put(motg->phy_reset_clk); +free_motg: + kfree(motg->phy.otg); + kfree(motg); + return ret; +} + +static int msm_otg_remove(struct platform_device *pdev) +{ + struct msm_otg *motg = platform_get_drvdata(pdev); + struct usb_phy *phy = &motg->phy; + int cnt = 0; + + if (phy->otg->host || phy->otg->gadget) + return -EBUSY; + + msm_otg_debugfs_cleanup(); + cancel_delayed_work_sync(&motg->chg_work); + cancel_work_sync(&motg->sm_work); + + pm_runtime_resume(&pdev->dev); + + device_init_wakeup(&pdev->dev, 0); + pm_runtime_disable(&pdev->dev); + + usb_remove_phy(phy); + free_irq(motg->irq, motg); + + /* + * Put PHY in low power mode. + */ + ulpi_read(phy, 0x14); + ulpi_write(phy, 0x08, 0x09); + + writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC); + while (cnt < PHY_SUSPEND_TIMEOUT_USEC) { + if (readl(USB_PORTSC) & PORTSC_PHCD) + break; + udelay(1); + cnt++; + } + if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) + dev_err(phy->dev, "Unable to suspend PHY\n"); + + clk_disable(motg->pclk); + clk_disable(motg->clk); + if (motg->core_clk) + clk_disable(motg->core_clk); + if (!IS_ERR(motg->pclk_src)) { + clk_disable(motg->pclk_src); + clk_put(motg->pclk_src); + } + msm_hsusb_ldo_init(motg, 0); + + iounmap(motg->regs); + pm_runtime_set_suspended(&pdev->dev); + + clk_put(motg->phy_reset_clk); + clk_put(motg->pclk); + clk_put(motg->clk); + if (motg->core_clk) + clk_put(motg->core_clk); + + kfree(motg->phy.otg); + kfree(motg); + + return 0; +} + +#ifdef CONFIG_PM_RUNTIME +static int msm_otg_runtime_idle(struct device *dev) +{ + struct msm_otg *motg = dev_get_drvdata(dev); + struct usb_otg *otg = motg->phy.otg; + + dev_dbg(dev, "OTG runtime idle\n"); + + /* + * It is observed some times that a spurious interrupt + * comes when PHY is put into LPM immediately after PHY reset. + * This 1 sec delay also prevents entering into LPM immediately + * after asynchronous interrupt. + */ + if (otg->phy->state != OTG_STATE_UNDEFINED) + pm_schedule_suspend(dev, 1000); + + return -EAGAIN; +} + +static int msm_otg_runtime_suspend(struct device *dev) +{ + struct msm_otg *motg = dev_get_drvdata(dev); + + dev_dbg(dev, "OTG runtime suspend\n"); + return msm_otg_suspend(motg); +} + +static int msm_otg_runtime_resume(struct device *dev) +{ + struct msm_otg *motg = dev_get_drvdata(dev); + + dev_dbg(dev, "OTG runtime resume\n"); + return msm_otg_resume(motg); +} +#endif + +#ifdef CONFIG_PM_SLEEP +static int msm_otg_pm_suspend(struct device *dev) +{ + struct msm_otg *motg = dev_get_drvdata(dev); + + dev_dbg(dev, "OTG PM suspend\n"); + return msm_otg_suspend(motg); +} + +static int msm_otg_pm_resume(struct device *dev) +{ + struct msm_otg *motg = dev_get_drvdata(dev); + int ret; + + dev_dbg(dev, "OTG PM resume\n"); + + ret = msm_otg_resume(motg); + if (ret) + return ret; + + /* + * Runtime PM Documentation recommends bringing the + * device to full powered state upon resume. + */ + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + return 0; +} +#endif + +#ifdef CONFIG_PM +static const struct dev_pm_ops msm_otg_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume) + SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume, + msm_otg_runtime_idle) +}; +#endif + +static struct platform_driver msm_otg_driver = { + .remove = msm_otg_remove, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &msm_otg_dev_pm_ops, +#endif + }, +}; + +module_platform_driver_probe(msm_otg_driver, msm_otg_probe); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("MSM USB transceiver driver"); |