diff options
Diffstat (limited to 'drivers/tty/serial/samsung.c')
| -rw-r--r-- | drivers/tty/serial/samsung.c | 63 |
1 files changed, 54 insertions, 9 deletions
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 2769a38d15b..074b9194144 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -39,6 +39,7 @@ #include <linux/tty_flip.h> #include <linux/serial_core.h> #include <linux/serial.h> +#include <linux/serial_s3c.h> #include <linux/delay.h> #include <linux/clk.h> #include <linux/cpufreq.h> @@ -46,10 +47,9 @@ #include <asm/irq.h> -#include <mach/hardware.h> - -#include <plat/regs-serial.h> +#ifdef CONFIG_SAMSUNG_CLOCK #include <plat/clock.h> +#endif #include "samsung.h" @@ -446,6 +446,8 @@ static void s3c24xx_serial_shutdown(struct uart_port *port) /* Clear pending interrupts and mask all interrupts */ if (s3c24xx_serial_has_interrupt_mask(port)) { + free_irq(port->irq, ourport); + wr_regl(port, S3C64XX_UINTP, 0xf); wr_regl(port, S3C64XX_UINTM, 0xf); } @@ -505,6 +507,8 @@ static int s3c64xx_serial_startup(struct uart_port *port) dbg("s3c64xx_serial_startup: port=%p (%08lx,%p)\n", port->mapbase, port->membase); + wr_regl(port, S3C64XX_UINTM, 0xf); + ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED, s3c24xx_serial_portname(port), ourport); if (ret) { @@ -894,7 +898,7 @@ console_initcall(s3c24xx_serial_console_init); #define S3C24XX_SERIAL_CONSOLE NULL #endif -#ifdef CONFIG_CONSOLE_POLL +#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) static int s3c24xx_serial_get_poll_char(struct uart_port *port); static void s3c24xx_serial_put_poll_char(struct uart_port *port, unsigned char c); @@ -918,7 +922,7 @@ static struct uart_ops s3c24xx_serial_ops = { .request_port = s3c24xx_serial_request_port, .config_port = s3c24xx_serial_config_port, .verify_port = s3c24xx_serial_verify_port, -#ifdef CONFIG_CONSOLE_POLL +#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) .poll_get_char = s3c24xx_serial_get_poll_char, .poll_put_char = s3c24xx_serial_put_poll_char, #endif @@ -1179,6 +1183,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, return 0; } +#ifdef CONFIG_SAMSUNG_CLOCK static ssize_t s3c24xx_serial_show_clksrc(struct device *dev, struct device_attribute *attr, char *buf) @@ -1194,7 +1199,7 @@ static ssize_t s3c24xx_serial_show_clksrc(struct device *dev, } static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL); - +#endif /* Device driver serial port probe */ @@ -1252,9 +1257,11 @@ static int s3c24xx_serial_probe(struct platform_device *pdev) uart_add_one_port(&s3c24xx_uart_drv, &ourport->port); platform_set_drvdata(pdev, &ourport->port); +#ifdef CONFIG_SAMSUNG_CLOCK ret = device_create_file(&pdev->dev, &dev_attr_clock_source); if (ret < 0) dev_err(&pdev->dev, "failed to add clock source attr.\n"); +#endif ret = s3c24xx_serial_cpufreq_register(ourport); if (ret < 0) @@ -1272,7 +1279,9 @@ static int s3c24xx_serial_remove(struct platform_device *dev) if (port) { s3c24xx_serial_cpufreq_deregister(to_ourport(port)); +#ifdef CONFIG_SAMSUNG_CLOCK device_remove_file(&dev->dev, &dev_attr_clock_source); +#endif uart_remove_one_port(&s3c24xx_uart_drv, port); } @@ -1307,9 +1316,29 @@ static int s3c24xx_serial_resume(struct device *dev) return 0; } +static int s3c24xx_serial_resume_noirq(struct device *dev) +{ + struct uart_port *port = s3c24xx_dev_to_port(dev); + + if (port) { + /* restore IRQ mask */ + if (s3c24xx_serial_has_interrupt_mask(port)) { + unsigned int uintm = 0xf; + if (tx_enabled(port)) + uintm &= ~S3C64XX_UINTM_TXD_MSK; + if (rx_enabled(port)) + uintm &= ~S3C64XX_UINTM_RXD_MSK; + wr_regl(port, S3C64XX_UINTM, uintm); + } + } + + return 0; +} + static const struct dev_pm_ops s3c24xx_serial_pm_ops = { .suspend = s3c24xx_serial_suspend, .resume = s3c24xx_serial_resume, + .resume_noirq = s3c24xx_serial_resume_noirq, }; #define SERIAL_SAMSUNG_PM_OPS (&s3c24xx_serial_pm_ops) @@ -1343,6 +1372,13 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0; } +static bool +s3c24xx_port_configured(unsigned int ucon) +{ + /* consider the serial port configured if the tx/rx mode set */ + return (ucon & 0xf) != 0; +} + #ifdef CONFIG_CONSOLE_POLL /* * Console polling routines for writing and reading from the uart while @@ -1365,6 +1401,11 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port, unsigned char c) { unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON); + unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON); + + /* not possible to xmit on unconfigured port */ + if (!s3c24xx_port_configured(ucon)) + return; while (!s3c24xx_serial_console_txrdy(port, ufcon)) cpu_relax(); @@ -1377,6 +1418,12 @@ static void s3c24xx_serial_console_putchar(struct uart_port *port, int ch) { unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON); + unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON); + + /* not possible to xmit on unconfigured port */ + if (!s3c24xx_port_configured(ucon)) + return; + while (!s3c24xx_serial_console_txrdy(port, ufcon)) barrier(); wr_regb(cons_uart, S3C2410_UTXH, ch); @@ -1409,9 +1456,7 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud, "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n", port, ulcon, ucon, ubrdiv); - if ((ucon & 0xf) != 0) { - /* consider the serial port configured if the tx/rx mode set */ - + if (s3c24xx_port_configured(ucon)) { switch (ulcon & S3C2410_LCON_CSMASK) { case S3C2410_LCON_CS5: *bits = 5; |