summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/bfin_uart.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/bfin_uart.c')
-rw-r--r--drivers/tty/serial/bfin_uart.c74
1 files changed, 27 insertions, 47 deletions
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 5832fdef11e..bd97db23985 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -1,7 +1,7 @@
/*
* Blackfin On-Chip Serial Driver
*
- * Copyright 2006-2010 Analog Devices Inc.
+ * Copyright 2006-2011 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
@@ -35,10 +35,6 @@
#include <asm/portmux.h>
#include <asm/cacheflush.h>
#include <asm/dma.h>
-
-#define port_membase(uart) (((struct bfin_serial_port *)(uart))->port.membase)
-#define get_lsr_cache(uart) (((struct bfin_serial_port *)(uart))->lsr)
-#define put_lsr_cache(uart, v) (((struct bfin_serial_port *)(uart))->lsr = (v))
#include <asm/bfin_serial.h>
#ifdef CONFIG_SERIAL_BFIN_MODULE
@@ -166,7 +162,7 @@ static void bfin_serial_stop_tx(struct uart_port *port)
uart->tx_count = 0;
uart->tx_done = 1;
#else
-#ifdef CONFIG_BF54x
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
/* Clear TFI bit */
UART_PUT_LSR(uart, TFI);
#endif
@@ -337,7 +333,7 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
struct circ_buf *xmit = &uart->port.state->xmit;
if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
-#ifdef CONFIG_BF54x
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
/* Clear TFI bit */
UART_PUT_LSR(uart, TFI);
#endif
@@ -536,7 +532,7 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
*/
UART_CLEAR_IER(uart, ETBEI);
uart->port.icount.tx += uart->tx_count;
- if (!uart_circ_empty(xmit)) {
+ if (!(xmit->tail == 0 && xmit->head == 0)) {
xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -553,7 +549,7 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
{
struct bfin_serial_port *uart = dev_id;
- unsigned short irqstat;
+ unsigned int irqstat;
int x_pos, pos;
spin_lock(&uart->rx_lock);
@@ -586,7 +582,7 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
static unsigned int bfin_serial_tx_empty(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
- unsigned short lsr;
+ unsigned int lsr;
lsr = UART_GET_LSR(uart);
if (lsr & TEMT)
@@ -598,7 +594,7 @@ static unsigned int bfin_serial_tx_empty(struct uart_port *port)
static void bfin_serial_break_ctl(struct uart_port *port, int break_state)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
- u16 lcr = UART_GET_LCR(uart);
+ u32 lcr = UART_GET_LCR(uart);
if (break_state)
lcr |= SB;
else
@@ -745,7 +741,7 @@ static int bfin_serial_startup(struct uart_port *port)
}
/* CTS RTS PINs are negative assertive. */
- UART_PUT_MCR(uart, ACTS);
+ UART_PUT_MCR(uart, UART_GET_MCR(uart) | ACTS);
UART_SET_IER(uart, EDSSI);
}
#endif
@@ -803,7 +799,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
unsigned long flags;
unsigned int baud, quot;
- unsigned short val, ier, lcr = 0;
+ unsigned int ier, lcr = 0;
switch (termios->c_cflag & CSIZE) {
case CS8:
@@ -875,26 +871,23 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
/* Disable UART */
ier = UART_GET_IER(uart);
+ UART_PUT_GCTL(uart, UART_GET_GCTL(uart) & ~UCEN);
UART_DISABLE_INTS(uart);
- /* Set DLAB in LCR to Access DLL and DLH */
+ /* Set DLAB in LCR to Access CLK */
UART_SET_DLAB(uart);
- UART_PUT_DLL(uart, quot & 0xFF);
- UART_PUT_DLH(uart, (quot >> 8) & 0xFF);
+ UART_PUT_CLK(uart, quot);
SSYNC();
/* Clear DLAB in LCR to Access THR RBR IER */
UART_CLEAR_DLAB(uart);
- UART_PUT_LCR(uart, lcr);
+ UART_PUT_LCR(uart, (UART_GET_LCR(uart) & ~LCR_MASK) | lcr);
/* Enable UART */
UART_ENABLE_INTS(uart, ier);
-
- val = UART_GET_GCTL(uart);
- val |= UCEN;
- UART_PUT_GCTL(uart, val);
+ UART_PUT_GCTL(uart, UART_GET_GCTL(uart) | UCEN);
/* Port speed changed, update the per-port timeout. */
uart_update_timeout(port, termios->c_cflag, baud);
@@ -954,17 +947,17 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
static void bfin_serial_set_ldisc(struct uart_port *port, int ld)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
- unsigned short val;
+ unsigned int val;
switch (ld) {
case N_IRDA:
val = UART_GET_GCTL(uart);
- val |= (IREN | RPOLC);
+ val |= (UMOD_IRDA | RPOLC);
UART_PUT_GCTL(uart, val);
break;
default:
val = UART_GET_GCTL(uart);
- val &= ~(IREN | RPOLC);
+ val &= ~(UMOD_MASK | RPOLC);
UART_PUT_GCTL(uart, val);
}
}
@@ -972,13 +965,13 @@ static void bfin_serial_set_ldisc(struct uart_port *port, int ld)
static void bfin_serial_reset_irda(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
- unsigned short val;
+ unsigned int val;
val = UART_GET_GCTL(uart);
- val &= ~(IREN | RPOLC);
+ val &= ~(UMOD_MASK | RPOLC);
UART_PUT_GCTL(uart, val);
SSYNC();
- val |= (IREN | RPOLC);
+ val |= (UMOD_IRDA | RPOLC);
UART_PUT_GCTL(uart, val);
SSYNC();
}
@@ -1070,12 +1063,12 @@ static void __init
bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
int *parity, int *bits)
{
- unsigned short status;
+ unsigned int status;
status = UART_GET_IER(uart) & (ERBFI | ETBEI);
if (status == (ERBFI | ETBEI)) {
/* ok, the port was enabled */
- u16 lcr, dlh, dll;
+ u32 lcr, clk;
lcr = UART_GET_LCR(uart);
@@ -1086,30 +1079,17 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
else
*parity = 'o';
}
- switch (lcr & 0x03) {
- case 0:
- *bits = 5;
- break;
- case 1:
- *bits = 6;
- break;
- case 2:
- *bits = 7;
- break;
- case 3:
- *bits = 8;
- break;
- }
- /* Set DLAB in LCR to Access DLL and DLH */
+ *bits = ((lcr & WLS_MASK) >> WLS_OFFSET) + 5;
+
+ /* Set DLAB in LCR to Access CLK */
UART_SET_DLAB(uart);
- dll = UART_GET_DLL(uart);
- dlh = UART_GET_DLH(uart);
+ clk = UART_GET_CLK(uart);
/* Clear DLAB in LCR to Access THR RBR IER */
UART_CLEAR_DLAB(uart);
- *baud = get_sclk() / (16*(dll | dlh << 8));
+ *baud = get_sclk() / (16*clk);
}
pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits);
}
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-11-04 02:37:36 +0000