diff options
Diffstat (limited to 'drivers/net/ethernet')
| -rw-r--r-- | drivers/net/ethernet/intel/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_82575.c | 3 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_82575.h | 6 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_defines.h | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_hw.h | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_regs.h | 8 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/igb.h | 11 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/igb_main.c | 269 |
8 files changed, 301 insertions, 1 deletions
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index bde4f3db328..e8912f1b844 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -94,6 +94,8 @@ config IGB tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" depends on PCI select PTP_1588_CLOCK + select I2C + select I2C_ALGOBIT ---help--- This driver supports Intel(R) 82575/82576 gigabit ethernet family of adapters. For more information on how to identify your adapter, go diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index fdaaf2709d0..51e3f4f9b53 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -33,6 +33,7 @@ #include <linux/types.h> #include <linux/if_ether.h> +#include <linux/i2c.h> #include "e1000_mac.h" #include "e1000_82575.h" @@ -2314,6 +2315,8 @@ static struct e1000_phy_operations e1000_phy_ops_82575 = { .acquire = igb_acquire_phy_82575, .get_cfg_done = igb_get_cfg_done_82575, .release = igb_release_phy_82575, + .write_i2c_byte = igb_write_i2c_byte, + .read_i2c_byte = igb_read_i2c_byte, }; static struct e1000_nvm_operations e1000_nvm_ops_82575 = { diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h index 44b76b3b681..67bd9f93c3c 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.h +++ b/drivers/net/ethernet/intel/igb/e1000_82575.h @@ -32,6 +32,10 @@ extern void igb_shutdown_serdes_link_82575(struct e1000_hw *hw); extern void igb_power_up_serdes_link_82575(struct e1000_hw *hw); extern void igb_power_down_phy_copper_82575(struct e1000_hw *hw); extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw); +extern s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data); +extern s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data); #define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \ (ID_LED_DEF1_DEF2 << 8) | \ @@ -261,4 +265,6 @@ void igb_vmdq_set_replication_pf(struct e1000_hw *, bool); u16 igb_rxpbs_adjust_82580(u32 data); s32 igb_set_eee_i350(struct e1000_hw *); +#define E1000_I2C_THERMAL_SENSOR_ADDR 0xF8 + #endif diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index 45dce06eff2..446678ec9fe 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -470,6 +470,7 @@ #define E1000_ERR_NO_SPACE 17 #define E1000_ERR_NVM_PBA_SECTION 18 #define E1000_ERR_INVM_VALUE_NOT_FOUND 19 +#define E1000_ERR_I2C 20 /* Loop limit on how long we wait for auto-negotiation to complete */ #define COPPER_LINK_UP_LIMIT 10 diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h index c2a51dcda55..75312ba10d5 100644 --- a/drivers/net/ethernet/intel/igb/e1000_hw.h +++ b/drivers/net/ethernet/intel/igb/e1000_hw.h @@ -342,6 +342,8 @@ struct e1000_phy_operations { s32 (*set_d0_lplu_state)(struct e1000_hw *, bool); s32 (*set_d3_lplu_state)(struct e1000_hw *, bool); s32 (*write_reg)(struct e1000_hw *, u32, u16); + s32 (*read_i2c_byte)(struct e1000_hw *, u8, u8, u8 *); + s32 (*write_i2c_byte)(struct e1000_hw *, u8, u8, u8); }; struct e1000_nvm_operations { diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h index e5db48594e8..31c3e2f4f58 100644 --- a/drivers/net/ethernet/intel/igb/e1000_regs.h +++ b/drivers/net/ethernet/intel/igb/e1000_regs.h @@ -75,6 +75,14 @@ #define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ #define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ #define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */ +#define E1000_I2CPARAMS 0x0102C /* SFPI2C Parameters Register - RW */ +#define E1000_I2CBB_EN 0x00000100 /* I2C - Bit Bang Enable */ +#define E1000_I2C_CLK_OUT 0x00000200 /* I2C- Clock */ +#define E1000_I2C_DATA_OUT 0x00000400 /* I2C- Data Out */ +#define E1000_I2C_DATA_OE_N 0x00000800 /* I2C- Data Output Enable */ +#define E1000_I2C_DATA_IN 0x00001000 /* I2C- Data In */ +#define E1000_I2C_CLK_OE_N 0x00002000 /* I2C- Clock Output Enable */ +#define E1000_I2C_CLK_IN 0x00004000 /* I2C- Clock In */ /* IEEE 1588 TIMESYNCH */ #define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */ diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index 17f1686ee41..9f1af1b232d 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -39,6 +39,8 @@ #include <linux/ptp_clock_kernel.h> #include <linux/bitops.h> #include <linux/if_vlan.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> struct igb_adapter; @@ -301,6 +303,11 @@ static inline int igb_desc_unused(struct igb_ring *ring) return ring->count + ring->next_to_clean - ring->next_to_use - 1; } +struct igb_i2c_client_list { + struct i2c_client *client; + struct igb_i2c_client_list *next; +}; + /* board specific private data structure */ struct igb_adapter { unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; @@ -391,6 +398,9 @@ struct igb_adapter { struct timecounter tc; char fw_version[32]; + struct i2c_algo_bit_data i2c_algo; + struct i2c_adapter i2c_adap; + struct igb_i2c_client_list *i2c_clients; }; #define IGB_FLAG_HAS_MSI (1 << 0) @@ -466,7 +476,6 @@ static inline void igb_ptp_rx_hwtstamp(struct igb_q_vector *q_vector, extern int igb_ptp_hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); - static inline s32 igb_reset_phy(struct e1000_hw *hw) { if (hw->phy.ops.reset) diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 342bbd661d3..0173b611842 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -57,6 +57,7 @@ #ifdef CONFIG_IGB_DCA #include <linux/dca.h> #endif +#include <linux/i2c.h> #include "igb.h" #define MAJ 4 @@ -567,6 +568,91 @@ exit: return; } +/* igb_get_i2c_data - Reads the I2C SDA data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Returns the I2C data bit value + */ +static int igb_get_i2c_data(void *data) +{ + struct igb_adapter *adapter = (struct igb_adapter *)data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = rd32(E1000_I2CPARAMS); + + return ((i2cctl & E1000_I2C_DATA_IN) != 0); +} + +/* igb_set_i2c_data - Sets the I2C data bit + * @data: pointer to hardware structure + * @state: I2C data value (0 or 1) to set + * + * Sets the I2C data bit + */ +static void igb_set_i2c_data(void *data, int state) +{ + struct igb_adapter *adapter = (struct igb_adapter *)data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = rd32(E1000_I2CPARAMS); + + if (state) + i2cctl |= E1000_I2C_DATA_OUT; + else + i2cctl &= ~E1000_I2C_DATA_OUT; + + i2cctl &= ~E1000_I2C_DATA_OE_N; + i2cctl |= E1000_I2C_CLK_OE_N; + wr32(E1000_I2CPARAMS, i2cctl); + wrfl(); + +} + +/* igb_set_i2c_clk - Sets the I2C SCL clock + * @data: pointer to hardware structure + * @state: state to set clock + * + * Sets the I2C clock line to state + */ +static void igb_set_i2c_clk(void *data, int state) +{ + struct igb_adapter *adapter = (struct igb_adapter *)data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = rd32(E1000_I2CPARAMS); + + if (state) { + i2cctl |= E1000_I2C_CLK_OUT; + i2cctl &= ~E1000_I2C_CLK_OE_N; + } else { + i2cctl &= ~E1000_I2C_CLK_OUT; + i2cctl &= ~E1000_I2C_CLK_OE_N; + } + wr32(E1000_I2CPARAMS, i2cctl); + wrfl(); +} + +/* igb_get_i2c_clk - Gets the I2C SCL clock state + * @data: pointer to hardware structure + * + * Gets the I2C clock state + */ +static int igb_get_i2c_clk(void *data) +{ + struct igb_adapter *adapter = (struct igb_adapter *)data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = rd32(E1000_I2CPARAMS); + + return ((i2cctl & E1000_I2C_CLK_IN) != 0); +} + +static const struct i2c_algo_bit_data igb_i2c_algo = { + .setsda = igb_set_i2c_data, + .setscl = igb_set_i2c_clk, + .getsda = igb_get_i2c_data, + .getscl = igb_get_i2c_clk, + .udelay = 5, + .timeout = 20, +}; + /** * igb_get_hw_dev - return device * used by hardware layer to print debugging information @@ -1824,6 +1910,37 @@ void igb_set_fw_version(struct igb_adapter *adapter) return; } +static const struct i2c_board_info i350_sensor_info = { + I2C_BOARD_INFO("i350bb", 0Xf8), +}; + +/* igb_init_i2c - Init I2C interface + * @adapter: pointer to adapter structure + * + */ +static s32 igb_init_i2c(struct igb_adapter *adapter) +{ + s32 status = E1000_SUCCESS; + + /* I2C interface supported on i350 devices */ + if (adapter->hw.mac.type != e1000_i350) + return E1000_SUCCESS; + + /* Initialize the i2c bus which is controlled by the registers. + * This bus will use the i2c_algo_bit structue that implements + * the protocol through toggling of the 4 bits in the register. + */ + adapter->i2c_adap.owner = THIS_MODULE; + adapter->i2c_algo = igb_i2c_algo; + adapter->i2c_algo.data = adapter; + adapter->i2c_adap.algo_data = &adapter->i2c_algo; + adapter->i2c_adap.dev.parent = &adapter->pdev->dev; + strlcpy(adapter->i2c_adap.name, "igb BB", + sizeof(adapter->i2c_adap.name)); + status = i2c_bit_add_bus(&adapter->i2c_adap); + return status; +} + /** * igb_probe - Device Initialization Routine * @pdev: PCI device information struct @@ -2116,6 +2233,13 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* reset the hardware with the new settings */ igb_reset(adapter); + /* Init the I2C interface */ + err = igb_init_i2c(adapter); + if (err) { + dev_err(&pdev->dev, "failed to init i2c interface\n"); + goto err_eeprom; + } + /* let the f/w know that the h/w is now under the control of the * driver. */ igb_get_hw_control(adapter); @@ -2177,6 +2301,7 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err_register: igb_release_hw_control(adapter); + memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap)); err_eeprom: if (!igb_check_reset_block(hw)) igb_reset_phy(hw); @@ -2290,6 +2415,18 @@ out: } #endif +/* + * igb_remove_i2c - Cleanup I2C interface + * @adapter: pointer to adapter structure + * + */ +static void igb_remove_i2c(struct igb_adapter *adapter) +{ + + /* free the adapter bus structure */ + i2c_del_adapter(&adapter->i2c_adap); +} + /** * igb_remove - Device Removal Routine * @pdev: PCI device information struct @@ -2306,6 +2443,8 @@ static void igb_remove(struct pci_dev *pdev) struct e1000_hw *hw = &adapter->hw; pm_runtime_get_noresume(&pdev->dev); + igb_remove_i2c(adapter); + igb_ptp_stop(adapter); /* @@ -7425,4 +7564,134 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) } } +static DEFINE_SPINLOCK(i2c_clients_lock); + +/* igb_get_i2c_client - returns matching client + * in adapters's client list. + * @adapter: adapter struct + * @dev_addr: device address of i2c needed. + */ +struct i2c_client * +igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr) +{ + ulong flags; + struct igb_i2c_client_list *client_list; + struct i2c_client *client = NULL; + struct i2c_board_info client_info = { + I2C_BOARD_INFO("igb", 0x00), + }; + + spin_lock_irqsave(&i2c_clients_lock, flags); + client_list = adapter->i2c_clients; + + /* See if we already have an i2c_client */ + while (client_list) { + if (client_list->client->addr == (dev_addr >> 1)) { + client = client_list->client; + goto exit; + } else { + client_list = client_list->next; + } + } + + /* no client_list found, create a new one */ + client_list = kzalloc(sizeof(*client_list), GFP_KERNEL); + if (client_list == NULL) + goto exit; + + /* dev_addr passed to us is left-shifted by 1 bit + * i2c_new_device call expects it to be flush to the right. + */ + client_info.addr = dev_addr >> 1; + client_info.platform_data = adapter; + client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info); + if (client_list->client == NULL) { + dev_info(&adapter->pdev->dev, "Failed to create new i2c device..\n"); + goto err_no_client; + } + + /* insert new client at head of list */ + client_list->next = adapter->i2c_clients; + adapter->i2c_clients = client_list; + + spin_unlock_irqrestore(&i2c_clients_lock, flags); + + client = client_list->client; + goto exit; + +err_no_client: + kfree(client_list); +exit: + spin_unlock_irqrestore(&i2c_clients_lock, flags); + return client; +} + +/* igb_read_i2c_byte - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @dev_addr: device address + * @data: value read + * + * Performs byte read operation over I2C interface at + * a specified device address. + */ +s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); + struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr); + s32 status; + u16 swfw_mask = 0; + + if (!this_client) + return E1000_ERR_I2C; + + swfw_mask = E1000_SWFW_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) + != E1000_SUCCESS) + return E1000_ERR_SWFW_SYNC; + + status = i2c_smbus_read_byte_data(this_client, byte_offset); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + + if (status < 0) + return E1000_ERR_I2C; + else { + *data = status; + return E1000_SUCCESS; + } +} + +/* igb_write_i2c_byte - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: device address + * @data: value to write + * + * Performs byte write operation over I2C interface at + * a specified device address. + */ +s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); + struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr); + s32 status; + u16 swfw_mask = E1000_SWFW_PHY0_SM; + + if (!this_client) + return E1000_ERR_I2C; + + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS) + return E1000_ERR_SWFW_SYNC; + status = i2c_smbus_write_byte_data(this_client, byte_offset, data); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + + if (status) + return E1000_ERR_I2C; + else + return E1000_SUCCESS; + +} /* igb_main.c */ |