diff options
Diffstat (limited to 'drivers/net/ethernet/xscale/ixp2000/enp2611.c')
| -rw-r--r-- | drivers/net/ethernet/xscale/ixp2000/enp2611.c | 232 | 
1 files changed, 0 insertions, 232 deletions
diff --git a/drivers/net/ethernet/xscale/ixp2000/enp2611.c b/drivers/net/ethernet/xscale/ixp2000/enp2611.c deleted file mode 100644 index 34a6cfd1793..00000000000 --- a/drivers/net/ethernet/xscale/ixp2000/enp2611.c +++ /dev/null @@ -1,232 +0,0 @@ -/* - * IXP2400 MSF network device driver for the Radisys ENP2611 - * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/init.h> -#include <linux/moduleparam.h> -#include <asm/hardware/uengine.h> -#include <asm/mach-types.h> -#include <asm/io.h> -#include "ixpdev.h" -#include "caleb.h" -#include "ixp2400-msf.h" -#include "pm3386.h" - -/*********************************************************************** - * The Radisys ENP2611 is a PCI form factor board with three SFP GBIC - * slots, connected via two PMC/Sierra 3386s and an SPI-3 bridge FPGA - * to the IXP2400. - * - *                +-------------+ - * SFP GBIC #0 ---+             |       +---------+ - *                |  PM3386 #0  +-------+         | - * SFP GBIC #1 ---+             |       | "Caleb" |         +---------+ - *                +-------------+       |         |         |         | - *                                      | SPI-3   +---------+ IXP2400 | - *                +-------------+       | bridge  |         |         | - * SFP GBIC #2 ---+             |       | FPGA    |         +---------+ - *                |  PM3386 #1  +-------+         | - *                |             |       +---------+ - *                +-------------+ - *              ^                   ^                  ^ - *              | 1.25Gbaud         | 104MHz           | 104MHz - *              | SERDES ea.        | SPI-3 ea.        | SPI-3 - * - ***********************************************************************/ -static struct ixp2400_msf_parameters enp2611_msf_parameters = -{ -	.rx_mode =		IXP2400_RX_MODE_UTOPIA_POS | -				IXP2400_RX_MODE_1x32 | -				IXP2400_RX_MODE_MPHY | -				IXP2400_RX_MODE_MPHY_32 | -				IXP2400_RX_MODE_MPHY_POLLED_STATUS | -				IXP2400_RX_MODE_MPHY_LEVEL3 | -				IXP2400_RX_MODE_RBUF_SIZE_64, - -	.rxclk01_multiplier =	IXP2400_PLL_MULTIPLIER_16, - -	.rx_poll_ports =	3, - -	.rx_channel_mode = { -		IXP2400_PORT_RX_MODE_MASTER | -		IXP2400_PORT_RX_MODE_POS_PHY | -		IXP2400_PORT_RX_MODE_POS_PHY_L3 | -		IXP2400_PORT_RX_MODE_ODD_PARITY | -		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, - -		IXP2400_PORT_RX_MODE_MASTER | -		IXP2400_PORT_RX_MODE_POS_PHY | -		IXP2400_PORT_RX_MODE_POS_PHY_L3 | -		IXP2400_PORT_RX_MODE_ODD_PARITY | -		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, - -		IXP2400_PORT_RX_MODE_MASTER | -		IXP2400_PORT_RX_MODE_POS_PHY | -		IXP2400_PORT_RX_MODE_POS_PHY_L3 | -		IXP2400_PORT_RX_MODE_ODD_PARITY | -		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, - -		IXP2400_PORT_RX_MODE_MASTER | -		IXP2400_PORT_RX_MODE_POS_PHY | -		IXP2400_PORT_RX_MODE_POS_PHY_L3 | -		IXP2400_PORT_RX_MODE_ODD_PARITY | -		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE -	}, - -	.tx_mode =		IXP2400_TX_MODE_UTOPIA_POS | -				IXP2400_TX_MODE_1x32 | -				IXP2400_TX_MODE_MPHY | -				IXP2400_TX_MODE_MPHY_32 | -				IXP2400_TX_MODE_MPHY_POLLED_STATUS | -				IXP2400_TX_MODE_MPHY_LEVEL3 | -				IXP2400_TX_MODE_TBUF_SIZE_64, - -	.txclk01_multiplier =	IXP2400_PLL_MULTIPLIER_16, - -	.tx_poll_ports =	3, - -	.tx_channel_mode = { -		IXP2400_PORT_TX_MODE_MASTER | -		IXP2400_PORT_TX_MODE_POS_PHY | -		IXP2400_PORT_TX_MODE_ODD_PARITY | -		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, - -		IXP2400_PORT_TX_MODE_MASTER | -		IXP2400_PORT_TX_MODE_POS_PHY | -		IXP2400_PORT_TX_MODE_ODD_PARITY | -		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, - -		IXP2400_PORT_TX_MODE_MASTER | -		IXP2400_PORT_TX_MODE_POS_PHY | -		IXP2400_PORT_TX_MODE_ODD_PARITY | -		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, - -		IXP2400_PORT_TX_MODE_MASTER | -		IXP2400_PORT_TX_MODE_POS_PHY | -		IXP2400_PORT_TX_MODE_ODD_PARITY | -		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE -	} -}; - -static struct net_device *nds[3]; -static struct timer_list link_check_timer; - -/* @@@ Poll the SFP moddef0 line too.  */ -/* @@@ Try to use the pm3386 DOOL interrupt as well.  */ -static void enp2611_check_link_status(unsigned long __dummy) -{ -	int i; - -	for (i = 0; i < 3; i++) { -		struct net_device *dev; -		int status; - -		dev = nds[i]; -		if (dev == NULL) -			continue; - -		status = pm3386_is_link_up(i); -		if (status && !netif_carrier_ok(dev)) { -			/* @@@ Should report autonegotiation status.  */ -			printk(KERN_INFO "%s: NIC Link is Up\n", dev->name); - -			pm3386_enable_tx(i); -			caleb_enable_tx(i); -			netif_carrier_on(dev); -		} else if (!status && netif_carrier_ok(dev)) { -			printk(KERN_INFO "%s: NIC Link is Down\n", dev->name); - -			netif_carrier_off(dev); -			caleb_disable_tx(i); -			pm3386_disable_tx(i); -		} -	} - -	link_check_timer.expires = jiffies + HZ / 10; -	add_timer(&link_check_timer); -} - -static void enp2611_set_port_admin_status(int port, int up) -{ -	if (up) { -		caleb_enable_rx(port); - -		pm3386_set_carrier(port, 1); -		pm3386_enable_rx(port); -	} else { -		caleb_disable_tx(port); -		pm3386_disable_tx(port); -		/* @@@ Flush out pending packets.  */ -		pm3386_set_carrier(port, 0); - -		pm3386_disable_rx(port); -		caleb_disable_rx(port); -	} -} - -static int __init enp2611_init_module(void) -{  -	int ports; -	int i; - -	if (!machine_is_enp2611()) -		return -ENODEV; - -	caleb_reset(); -	pm3386_reset(); - -	ports = pm3386_port_count(); -	for (i = 0; i < ports; i++) { -		nds[i] = ixpdev_alloc(i, sizeof(struct ixpdev_priv)); -		if (nds[i] == NULL) { -			while (--i >= 0) -				free_netdev(nds[i]); -			return -ENOMEM; -		} - -		pm3386_init_port(i); -		pm3386_get_mac(i, nds[i]->dev_addr); -	} - -	ixp2400_msf_init(&enp2611_msf_parameters); - -	if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) { -		for (i = 0; i < ports; i++) -			if (nds[i]) -				free_netdev(nds[i]); -		return -EINVAL; -	} - -	init_timer(&link_check_timer); -	link_check_timer.function = enp2611_check_link_status; -	link_check_timer.expires = jiffies; -	add_timer(&link_check_timer); - -	return 0; -} - -static void __exit enp2611_cleanup_module(void) -{ -	int i; - -	del_timer_sync(&link_check_timer); - -	ixpdev_deinit(); -	for (i = 0; i < 3; i++) -		free_netdev(nds[i]); -} - -module_init(enp2611_init_module); -module_exit(enp2611_cleanup_module); -MODULE_LICENSE("GPL");  |