diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_main.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 49 |
1 files changed, 33 insertions, 16 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 8ef92d1a6aa..1ee5d0fbb90 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -55,6 +55,8 @@ char ixgbe_driver_name[] = "ixgbe"; static const char ixgbe_driver_string[] = "Intel(R) 10 Gigabit PCI Express Network Driver"; +char ixgbe_default_device_descr[] = + "Intel(R) 10 Gigabit Network Connection"; #define MAJ 3 #define MIN 6 #define BUILD 7 @@ -106,6 +108,7 @@ static DEFINE_PCI_DEVICE_TABLE(ixgbe_pci_tbl) = { {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF2), board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_LS), board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599EN_SFP), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF_QP), board_82599 }, /* required last entry */ {0, } }; @@ -146,7 +149,7 @@ static void ixgbe_service_event_complete(struct ixgbe_adapter *adapter) { BUG_ON(!test_bit(__IXGBE_SERVICE_SCHED, &adapter->state)); - /* flush memory to make sure state is correct before next watchog */ + /* flush memory to make sure state is correct before next watchdog */ smp_mb__before_clear_bit(); clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state); } @@ -1140,7 +1143,7 @@ void ixgbe_alloc_rx_buffers(struct ixgbe_ring *rx_ring, u16 cleaned_count) if (ring_is_ps_enabled(rx_ring)) { if (!bi->page) { - bi->page = netdev_alloc_page(rx_ring->netdev); + bi->page = alloc_page(GFP_ATOMIC | __GFP_COLD); if (!bi->page) { rx_ring->rx_stats.alloc_rx_page_failed++; goto no_buffers; @@ -2156,7 +2159,7 @@ static irqreturn_t ixgbe_intr(int irq, void *data) IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK); /* for NAPI, using EIAM to auto-mask tx/rx interrupt bits on read - * therefore no explict interrupt disable is necessary */ + * therefore no explicit interrupt disable is necessary */ eicr = IXGBE_READ_REG(hw, IXGBE_EICR); if (!eicr) { /* @@ -3044,7 +3047,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) hw->mac.ops.enable_rx_dma(hw, rxctrl); } -static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid) +static int ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid) { struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_hw *hw = &adapter->hw; @@ -3053,9 +3056,11 @@ static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid) /* add VID to filter table */ hw->mac.ops.set_vfta(&adapter->hw, vid, pool_ndx, true); set_bit(vid, adapter->active_vlans); + + return 0; } -static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) +static int ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) { struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_hw *hw = &adapter->hw; @@ -3064,6 +3069,8 @@ static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) /* remove VID from filter table */ hw->mac.ops.set_vfta(&adapter->hw, vid, pool_ndx, false); clear_bit(vid, adapter->active_vlans); + + return 0; } /** @@ -3602,7 +3609,7 @@ static inline bool ixgbe_is_sfp(struct ixgbe_hw *hw) static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter) { /* - * We are assuming the worst case scenerio here, and that + * We are assuming the worst case scenario here, and that * is that an SFP was inserted/removed after the reset * but before SFP detection was enabled. As such the best * solution is to just start searching as soon as we start @@ -3824,7 +3831,7 @@ void ixgbe_reset(struct ixgbe_adapter *adapter) case IXGBE_ERR_EEPROM_VERSION: /* We are running on a pre-production device, log a warning */ e_dev_warn("This device is a pre-production adapter/LOM. " - "Please be aware there may be issuesassociated with " + "Please be aware there may be issues associated with " "your hardware. If you are experiencing problems " "please contact your Intel or hardware " "representative who provided you with this " @@ -4019,7 +4026,7 @@ void ixgbe_down(struct ixgbe_adapter *adapter) /* Mark all the VFs as inactive */ for (i = 0 ; i < adapter->num_vfs; i++) - adapter->vfinfo[i].clear_to_send = 0; + adapter->vfinfo[i].clear_to_send = false; /* ping all the active vfs to let them know we are going down */ ixgbe_ping_all_vfs(adapter); @@ -5788,9 +5795,9 @@ static void ixgbe_fdir_reinit_subtask(struct ixgbe_adapter *adapter) * @adapter - pointer to the device adapter structure * * This function serves two purposes. First it strobes the interrupt lines - * in order to make certain interrupts are occuring. Secondly it sets the + * in order to make certain interrupts are occurring. Secondly it sets the * bits needed to check for TX hangs. As a result we should immediately - * determine if a hang has occured. + * determine if a hang has occurred. */ static void ixgbe_check_hang_subtask(struct ixgbe_adapter *adapter) { @@ -7128,7 +7135,7 @@ int ixgbe_setup_tc(struct net_device *dev, u8 tc) return -EINVAL; /* Hardware has to reinitialize queues and interrupts to - * match packet buffer alignment. Unfortunantly, the + * match packet buffer alignment. Unfortunately, the * hardware is not flexible enough to do this dynamically. */ if (netif_running(dev)) @@ -7174,7 +7181,8 @@ void ixgbe_do_reset(struct net_device *netdev) ixgbe_reset(adapter); } -static u32 ixgbe_fix_features(struct net_device *netdev, u32 data) +static netdev_features_t ixgbe_fix_features(struct net_device *netdev, + netdev_features_t data) { struct ixgbe_adapter *adapter = netdev_priv(netdev); @@ -7204,7 +7212,8 @@ static u32 ixgbe_fix_features(struct net_device *netdev, u32 data) return data; } -static int ixgbe_set_features(struct net_device *netdev, u32 data) +static int ixgbe_set_features(struct net_device *netdev, + netdev_features_t data) { struct ixgbe_adapter *adapter = netdev_priv(netdev); bool need_reset = false; @@ -7286,6 +7295,7 @@ static const struct net_device_ops ixgbe_netdev_ops = { .ndo_fcoe_enable = ixgbe_fcoe_enable, .ndo_fcoe_disable = ixgbe_fcoe_disable, .ndo_fcoe_get_wwn = ixgbe_fcoe_get_wwn, + .ndo_fcoe_get_hbainfo = ixgbe_fcoe_get_hbainfo, #endif /* IXGBE_FCOE */ .ndo_set_features = ixgbe_set_features, .ndo_fix_features = ixgbe_fix_features, @@ -7598,9 +7608,16 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, adapter->wol = 0; switch (pdev->device) { case IXGBE_DEV_ID_82599_SFP: - /* Only this subdevice supports WOL */ - if (pdev->subsystem_device == IXGBE_SUBDEV_ID_82599_SFP) + /* Only these subdevice supports WOL */ + switch (pdev->subsystem_device) { + case IXGBE_SUBDEV_ID_82599_560FLR: + /* only support first port */ + if (hw->bus.func != 0) + break; + case IXGBE_SUBDEV_ID_82599_SFP: adapter->wol = IXGBE_WUFC_MAG; + break; + } break; case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: /* All except this subdevice support WOL */ @@ -7708,7 +7725,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, /* add san mac addr to netdev */ ixgbe_add_sanmac_netdev(netdev); - e_dev_info("Intel(R) 10 Gigabit Network Connection\n"); + e_dev_info("%s\n", ixgbe_default_device_descr); cards_found++; return 0; |