diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/phy.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/phy.c | 23 |
1 files changed, 11 insertions, 12 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 35b45578c60..bd5ef64b300 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -718,7 +718,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) * 1 - Enabled */ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; - if (phy->disable_polarity_correction == 1) + if (phy->disable_polarity_correction) phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; /* Enable downshift on BM (disabled by default) */ @@ -1090,7 +1090,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) * If autoneg_advertised is zero, we assume it was not defaulted * by the calling code so we set to advertise full capability. */ - if (phy->autoneg_advertised == 0) + if (!phy->autoneg_advertised) phy->autoneg_advertised = phy->autoneg_mask; e_dbg("Reconfiguring auto-neg advertisement params\n"); @@ -1596,7 +1596,7 @@ s32 e1000e_check_downshift(struct e1000_hw *hw) ret_val = e1e_rphy(hw, offset, &phy_data); if (!ret_val) - phy->speed_downgraded = (phy_data & mask); + phy->speed_downgraded = !!(phy_data & mask); return ret_val; } @@ -1925,8 +1925,8 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw) if (ret_val) return ret_val; - phy->polarity_correction = (phy_data & - M88E1000_PSCR_POLARITY_REVERSAL); + phy->polarity_correction = !!(phy_data & + M88E1000_PSCR_POLARITY_REVERSAL); ret_val = e1000_check_polarity_m88(hw); if (ret_val) @@ -1936,7 +1936,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw) if (ret_val) return ret_val; - phy->is_mdix = (phy_data & M88E1000_PSSR_MDIX); + phy->is_mdix = !!(phy_data & M88E1000_PSSR_MDIX); if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) { ret_val = e1000_get_cable_length(hw); @@ -1999,7 +1999,7 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw) if (ret_val) return ret_val; - phy->is_mdix = (data & IGP01E1000_PSSR_MDIX); + phy->is_mdix = !!(data & IGP01E1000_PSSR_MDIX); if ((data & IGP01E1000_PSSR_SPEED_MASK) == IGP01E1000_PSSR_SPEED_1000MBPS) { @@ -2052,8 +2052,7 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw) ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data); if (ret_val) return ret_val; - phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE) - ? false : true; + phy->polarity_correction = !(data & IFE_PSC_AUTO_POLARITY_DISABLE); if (phy->polarity_correction) { ret_val = e1000_check_polarity_ife(hw); @@ -2070,7 +2069,7 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw) if (ret_val) return ret_val; - phy->is_mdix = (data & IFE_PMC_MDIX_STATUS) ? true : false; + phy->is_mdix = !!(data & IFE_PMC_MDIX_STATUS); /* The following parameters are undefined for 10/100 operation. */ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; @@ -2979,7 +2978,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, if ((hw->phy.type == e1000_phy_82578) && (hw->phy.revision >= 1) && (hw->phy.addr == 2) && - ((MAX_PHY_REG_ADDRESS & reg) == 0) && (data & (1 << 11))) { + !(MAX_PHY_REG_ADDRESS & reg) && (data & (1 << 11))) { u16 data2 = 0x7EFF; ret_val = e1000_access_phy_debug_regs_hv(hw, (1 << 6) | 0x3, @@ -3265,7 +3264,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw) if (ret_val) return ret_val; - phy->is_mdix = (data & I82577_PHY_STATUS2_MDIX) ? true : false; + phy->is_mdix = !!(data & I82577_PHY_STATUS2_MDIX); if ((data & I82577_PHY_STATUS2_SPEED_MASK) == I82577_PHY_STATUS2_SPEED_1000MBPS) { |