diff options
Diffstat (limited to 'drivers/net/ethernet/cirrus/cs89x0.c')
| -rw-r--r-- | drivers/net/ethernet/cirrus/cs89x0.c | 2219 |
1 files changed, 1103 insertions, 1116 deletions
diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c index b9406cbfc18..845b2020f29 100644 --- a/drivers/net/ethernet/cirrus/cs89x0.c +++ b/drivers/net/ethernet/cirrus/cs89x0.c @@ -1,105 +1,27 @@ /* cs89x0.c: A Crystal Semiconductor (Now Cirrus Logic) CS89[02]0 - * driver for linux. + * driver for linux. + * Written 1996 by Russell Nelson, with reference to skeleton.c + * written 1993-1994 by Donald Becker. + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + * + * The author may be reached at nelson@crynwr.com, Crynwr + * Software, 521 Pleasant Valley Rd., Potsdam, NY 13676 + * + * Other contributors: + * Mike Cruse : mcruse@cti-ltd.com + * Russ Nelson + * Melody Lee : ethernet@crystal.cirrus.com + * Alan Cox + * Andrew Morton + * Oskar Schirmer : oskar@scara.com + * Deepak Saxena : dsaxena@plexity.net + * Dmitry Pervushin : dpervushin@ru.mvista.com + * Deepak Saxena : dsaxena@plexity.net + * Domenico Andreoli : cavokz@gmail.com */ -/* - Written 1996 by Russell Nelson, with reference to skeleton.c - written 1993-1994 by Donald Becker. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached at nelson@crynwr.com, Crynwr - Software, 521 Pleasant Valley Rd., Potsdam, NY 13676 - - Changelog: - - Mike Cruse : mcruse@cti-ltd.com - : Changes for Linux 2.0 compatibility. - : Added dev_id parameter in net_interrupt(), - : request_irq() and free_irq(). Just NULL for now. - - Mike Cruse : Added MOD_INC_USE_COUNT and MOD_DEC_USE_COUNT macros - : in net_open() and net_close() so kerneld would know - : that the module is in use and wouldn't eject the - : driver prematurely. - - Mike Cruse : Rewrote init_module() and cleanup_module using 8390.c - : as an example. Disabled autoprobing in init_module(), - : not a good thing to do to other devices while Linux - : is running from all accounts. - - Russ Nelson : Jul 13 1998. Added RxOnly DMA support. - - Melody Lee : Aug 10 1999. Changes for Linux 2.2.5 compatibility. - : email: ethernet@crystal.cirrus.com - - Alan Cox : Removed 1.2 support, added 2.1 extra counters. - - Andrew Morton : Kernel 2.3.48 - : Handle kmalloc() failures - : Other resource allocation fixes - : Add SMP locks - : Integrate Russ Nelson's ALLOW_DMA functionality back in. - : If ALLOW_DMA is true, make DMA runtime selectable - : Folded in changes from Cirrus (Melody Lee - : <klee@crystal.cirrus.com>) - : Don't call netif_wake_queue() in net_send_packet() - : Fixed an out-of-mem bug in dma_rx() - : Updated Documentation/networking/cs89x0.txt - - Andrew Morton : Kernel 2.3.99-pre1 - : Use skb_reserve to longword align IP header (two places) - : Remove a delay loop from dma_rx() - : Replace '100' with HZ - : Clean up a couple of skb API abuses - : Added 'cs89x0_dma=N' kernel boot option - : Correctly initialise lp->lock in non-module compile - - Andrew Morton : Kernel 2.3.99-pre4-1 - : MOD_INC/DEC race fix (see - : http://www.uwsg.indiana.edu/hypermail/linux/kernel/0003.3/1532.html) - - Andrew Morton : Kernel 2.4.0-test7-pre2 - : Enhanced EEPROM support to cover more devices, - : abstracted IRQ mapping to support CONFIG_ARCH_CLPS7500 arch - : (Jason Gunthorpe <jgg@ualberta.ca>) - - Andrew Morton : Kernel 2.4.0-test11-pre4 - : Use dev->name in request_*() (Andrey Panin) - : Fix an error-path memleak in init_module() - : Preserve return value from request_irq() - : Fix type of `media' module parm (Keith Owens) - : Use SET_MODULE_OWNER() - : Tidied up strange request_irq() abuse in net_open(). - - Andrew Morton : Kernel 2.4.3-pre1 - : Request correct number of pages for DMA (Hugh Dickens) - : Select PP_ChipID _after_ unregister_netdev in cleanup_module() - : because unregister_netdev() calls get_stats. - : Make `version[]' __initdata - : Uninlined the read/write reg/word functions. - - Oskar Schirmer : oskar@scara.com - : HiCO.SH4 (superh) support added (irq#1, cs89x0_media=) - - Deepak Saxena : dsaxena@plexity.net - : Intel IXDP2x01 (XScale ixp2x00 NPU) platform support - - Dmitry Pervushin : dpervushin@ru.mvista.com - : PNX010X platform support - - Deepak Saxena : dsaxena@plexity.net - : Intel IXDP2351 platform support - - Dmitry Pervushin : dpervushin@ru.mvista.com - : PNX010X platform support - - Domenico Andreoli : cavokz@gmail.com - : QQ2440 platform support - -*/ - /* * Set this to zero to disable DMA code @@ -119,14 +41,12 @@ */ #define DEBUGGING 1 -/* - Sources: - - Crynwr packet driver epktisa. - - Crystal Semiconductor data sheets. +/* Sources: + * Crynwr packet driver epktisa. + * Crystal Semiconductor data sheets. + */ -*/ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/module.h> #include <linux/printk.h> @@ -147,8 +67,8 @@ #include <linux/bitops.h> #include <linux/delay.h> #include <linux/gfp.h> +#include <linux/io.h> -#include <asm/io.h> #include <asm/irq.h> #include <linux/atomic.h> #if ALLOW_DMA @@ -157,35 +77,55 @@ #include "cs89x0.h" +#define cs89_dbg(val, level, fmt, ...) \ +do { \ + if (val <= net_debug) \ + pr_##level(fmt, ##__VA_ARGS__); \ +} while (0) + static char version[] __initdata = -"cs89x0.c: v2.4.3-pre1 Russell Nelson <nelson@crynwr.com>, Andrew Morton\n"; + "v2.4.3-pre1 Russell Nelson <nelson@crynwr.com>, Andrew Morton"; #define DRV_NAME "cs89x0" /* First, a few definitions that the brave might change. - A zero-terminated list of I/O addresses to be probed. Some special flags.. - Addr & 1 = Read back the address port, look for signature and reset - the page window before probing - Addr & 3 = Reset the page window and probe - The CLPS eval board has the Cirrus chip at 0x80090300, in ARM IO space, - but it is possible that a Cirrus board could be plugged into the ISA - slots. */ + * A zero-terminated list of I/O addresses to be probed. Some special flags.. + * Addr & 1 = Read back the address port, look for signature and reset + * the page window before probing + * Addr & 3 = Reset the page window and probe + * The CLPS eval board has the Cirrus chip at 0x80090300, in ARM IO space, + * but it is possible that a Cirrus board could be plugged into the ISA + * slots. + */ /* The cs8900 has 4 IRQ pins, software selectable. cs8900_irq_map maps - them to system IRQ numbers. This mapping is card specific and is set to - the configuration of the Cirrus Eval board for this chip. */ + * them to system IRQ numbers. This mapping is card specific and is set to + * the configuration of the Cirrus Eval board for this chip. + */ #if defined(CONFIG_MACH_IXDP2351) #define CS89x0_NONISA_IRQ -static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0}; -static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0}; +static unsigned int netcard_portlist[] __used __initdata = { + IXDP2351_VIRT_CS8900_BASE, 0 +}; +static unsigned int cs8900_irq_map[] = { + IRQ_IXDP2351_CS8900, 0, 0, 0 +}; #elif defined(CONFIG_ARCH_IXDP2X01) #define CS89x0_NONISA_IRQ -static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0}; -static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; +static unsigned int netcard_portlist[] __used __initdata = { + IXDP2X01_CS8900_VIRT_BASE, 0 +}; +static unsigned int cs8900_irq_map[] = { + IRQ_IXDP2X01_CS8900, 0, 0, 0 +}; #else #ifndef CONFIG_CS89x0_PLATFORM -static unsigned int netcard_portlist[] __used __initdata = - { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; -static unsigned int cs8900_irq_map[] = {10,11,12,5}; +static unsigned int netcard_portlist[] __used __initdata = { + 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, + 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0 +}; +static unsigned int cs8900_irq_map[] = { + 10, 11, 12, 5 +}; #endif #endif @@ -222,6 +162,8 @@ struct net_local { int send_underrun; /* keep track of how many underruns in a row we get */ int force; /* force various values; see FORCE* above. */ spinlock_t lock; + void __iomem *virt_addr;/* CS89x0 virtual address. */ + unsigned long size; /* Length of CS89x0 memory region. */ #if ALLOW_DMA int use_dma; /* Flag: we're using dma */ int dma; /* DMA channel */ @@ -230,119 +172,42 @@ struct net_local { unsigned char *end_dma_buff; /* points to the end of the buffer */ unsigned char *rx_dma_ptr; /* points to the next packet */ #endif -#ifdef CONFIG_CS89x0_PLATFORM - void __iomem *virt_addr;/* Virtual address for accessing the CS89x0. */ - unsigned long phys_addr;/* Physical address for accessing the CS89x0. */ - unsigned long size; /* Length of CS89x0 memory region. */ -#endif }; -/* Index to functions, as function prototypes. */ - -static int cs89x0_probe1(struct net_device *dev, unsigned long ioaddr, int modular); -static int net_open(struct net_device *dev); -static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t net_interrupt(int irq, void *dev_id); -static void set_multicast_list(struct net_device *dev); -static void net_timeout(struct net_device *dev); -static void net_rx(struct net_device *dev); -static int net_close(struct net_device *dev); -static struct net_device_stats *net_get_stats(struct net_device *dev); -static void reset_chip(struct net_device *dev); -static int get_eeprom_data(struct net_device *dev, int off, int len, int *buffer); -static int get_eeprom_cksum(int off, int len, int *buffer); -static int set_mac_address(struct net_device *dev, void *addr); -static void count_rx_errors(int status, struct net_device *dev); -#ifdef CONFIG_NET_POLL_CONTROLLER -static void net_poll_controller(struct net_device *dev); -#endif -#if ALLOW_DMA -static void get_dma_channel(struct net_device *dev); -static void release_dma_buff(struct net_local *lp); -#endif - /* Example routines you must write ;->. */ #define tx_done(dev) 1 /* * Permit 'cs89x0_dma=N' in the kernel boot environment */ -#if !defined(MODULE) && (ALLOW_DMA != 0) +#if !defined(MODULE) +#if ALLOW_DMA static int g_cs89x0_dma; static int __init dma_fn(char *str) { - g_cs89x0_dma = simple_strtol(str,NULL,0); + g_cs89x0_dma = simple_strtol(str, NULL, 0); return 1; } __setup("cs89x0_dma=", dma_fn); -#endif /* !defined(MODULE) && (ALLOW_DMA != 0) */ +#endif /* ALLOW_DMA */ -#ifndef MODULE static int g_cs89x0_media__force; static int __init media_fn(char *str) { - if (!strcmp(str, "rj45")) g_cs89x0_media__force = FORCE_RJ45; - else if (!strcmp(str, "aui")) g_cs89x0_media__force = FORCE_AUI; - else if (!strcmp(str, "bnc")) g_cs89x0_media__force = FORCE_BNC; + if (!strcmp(str, "rj45")) + g_cs89x0_media__force = FORCE_RJ45; + else if (!strcmp(str, "aui")) + g_cs89x0_media__force = FORCE_AUI; + else if (!strcmp(str, "bnc")) + g_cs89x0_media__force = FORCE_BNC; + return 1; } __setup("cs89x0_media=", media_fn); - - -#ifndef CONFIG_CS89x0_PLATFORM -/* Check for a network adaptor of this type, and return '0' iff one exists. - If dev->base_addr == 0, probe all likely locations. - If dev->base_addr == 1, always return failure. - If dev->base_addr == 2, allocate space for the device and return success - (detachable devices only). - Return 0 on success. - */ - -struct net_device * __init cs89x0_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); - unsigned *port; - int err = 0; - int irq; - int io; - - if (!dev) - return ERR_PTR(-ENODEV); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - irq = dev->irq; - - if (net_debug) - printk("cs89x0:cs89x0_probe(0x%x)\n", io); - - if (io > 0x1ff) { /* Check a single specified location. */ - err = cs89x0_probe1(dev, io, 0); - } else if (io != 0) { /* Don't probe at all. */ - err = -ENXIO; - } else { - for (port = netcard_portlist; *port; port++) { - if (cs89x0_probe1(dev, *port, 0) == 0) - break; - dev->irq = irq; - } - if (!*port) - err = -ENODEV; - } - if (err) - goto out; - return dev; -out: - free_netdev(dev); - printk(KERN_WARNING "cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP\n"); - return ERR_PTR(err); -} -#endif #endif #if defined(CONFIG_MACH_IXDP2351) @@ -369,36 +234,22 @@ writeword(unsigned long base_addr, int portno, u16 value) { __raw_writel(value, base_addr + (portno << 1)); } -#else -static u16 -readword(unsigned long base_addr, int portno) -{ - return inw(base_addr + portno); -} - -static void -writeword(unsigned long base_addr, int portno, u16 value) -{ - outw(value, base_addr + portno); -} #endif -static void -readwords(unsigned long base_addr, int portno, void *buf, int length) +static void readwords(struct net_local *lp, int portno, void *buf, int length) { u8 *buf8 = (u8 *)buf; do { u16 tmp16; - tmp16 = readword(base_addr, portno); + tmp16 = ioread16(lp->virt_addr + portno); *buf8++ = (u8)tmp16; *buf8++ = (u8)(tmp16 >> 8); } while (--length); } -static void -writewords(unsigned long base_addr, int portno, void *buf, int length) +static void writewords(struct net_local *lp, int portno, void *buf, int length) { u8 *buf8 = (u8 *)buf; @@ -407,32 +258,37 @@ writewords(unsigned long base_addr, int portno, void *buf, int length) tmp16 = *buf8++; tmp16 |= (*buf8++) << 8; - writeword(base_addr, portno, tmp16); + iowrite16(tmp16, lp->virt_addr + portno); } while (--length); } static u16 readreg(struct net_device *dev, u16 regno) { - writeword(dev->base_addr, ADD_PORT, regno); - return readword(dev->base_addr, DATA_PORT); + struct net_local *lp = netdev_priv(dev); + + iowrite16(regno, lp->virt_addr + ADD_PORT); + return ioread16(lp->virt_addr + DATA_PORT); } static void writereg(struct net_device *dev, u16 regno, u16 value) { - writeword(dev->base_addr, ADD_PORT, regno); - writeword(dev->base_addr, DATA_PORT, value); + struct net_local *lp = netdev_priv(dev); + + iowrite16(regno, lp->virt_addr + ADD_PORT); + iowrite16(value, lp->virt_addr + DATA_PORT); } static int __init wait_eeprom_ready(struct net_device *dev) { int timeout = jiffies; - /* check to see if the EEPROM is ready, a timeout is used - - just in case EEPROM is ready when SI_BUSY in the - PP_SelfST is clear */ - while(readreg(dev, PP_SelfST) & SI_BUSY) + /* check to see if the EEPROM is ready, + * a timeout is used just in case EEPROM is ready when + * SI_BUSY in the PP_SelfST is clear + */ + while (readreg(dev, PP_SelfST) & SI_BUSY) if (jiffies - timeout >= 40) return -1; return 0; @@ -443,17 +299,19 @@ get_eeprom_data(struct net_device *dev, int off, int len, int *buffer) { int i; - if (net_debug > 3) printk("EEPROM data from %x for %x:\n",off,len); + cs89_dbg(3, info, "EEPROM data from %x for %x:", off, len); for (i = 0; i < len; i++) { - if (wait_eeprom_ready(dev) < 0) return -1; + if (wait_eeprom_ready(dev) < 0) + return -1; /* Now send the EEPROM read command and EEPROM location to read */ writereg(dev, PP_EECMD, (off + i) | EEPROM_READ_CMD); - if (wait_eeprom_ready(dev) < 0) return -1; + if (wait_eeprom_ready(dev) < 0) + return -1; buffer[i] = readreg(dev, PP_EEData); - if (net_debug > 3) printk("%04x ", buffer[i]); + cs89_dbg(3, cont, " %04x", buffer[i]); } - if (net_debug > 3) printk("\n"); - return 0; + cs89_dbg(3, cont, "\n"); + return 0; } static int __init @@ -470,341 +328,52 @@ get_eeprom_cksum(int off, int len, int *buffer) return -1; } -#ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling receive - used by netconsole and other diagnostic tools - * to allow network i/o with interrupts disabled. - */ -static void net_poll_controller(struct net_device *dev) -{ - disable_irq(dev->irq); - net_interrupt(dev->irq, dev); - enable_irq(dev->irq); -} -#endif - -static const struct net_device_ops net_ops = { - .ndo_open = net_open, - .ndo_stop = net_close, - .ndo_tx_timeout = net_timeout, - .ndo_start_xmit = net_send_packet, - .ndo_get_stats = net_get_stats, - .ndo_set_rx_mode = set_multicast_list, - .ndo_set_mac_address = set_mac_address, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = net_poll_controller, -#endif - .ndo_change_mtu = eth_change_mtu, - .ndo_validate_addr = eth_validate_addr, -}; - -/* This is the real probe routine. Linux has a history of friendly device - probes on the ISA bus. A good device probes avoids doing writes, and - verifies that the correct device exists and functions. - Return 0 on success. - */ - -static int __init -cs89x0_probe1(struct net_device *dev, unsigned long ioaddr, int modular) +static void +write_irq(struct net_device *dev, int chip_type, int irq) { - struct net_local *lp = netdev_priv(dev); - static unsigned version_printed; int i; - int tmp; - unsigned rev_type = 0; - int eeprom_buff[CHKSUM_LEN]; - int retval; - - /* Initialize the device structure. */ - if (!modular) { - memset(lp, 0, sizeof(*lp)); - spin_lock_init(&lp->lock); -#ifndef MODULE -#if ALLOW_DMA - if (g_cs89x0_dma) { - lp->use_dma = 1; - lp->dma = g_cs89x0_dma; - lp->dmasize = 16; /* Could make this an option... */ - } -#endif - lp->force = g_cs89x0_media__force; -#endif - - } - - /* Grab the region so we can find another board if autoIRQ fails. */ - /* WTF is going on here? */ - if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, DRV_NAME)) { - printk(KERN_ERR "%s: request_region(0x%lx, 0x%x) failed\n", - DRV_NAME, ioaddr, NETCARD_IO_EXTENT); - retval = -EBUSY; - goto out1; - } - - /* if they give us an odd I/O address, then do ONE write to - the address port, to get it back to address zero, where we - expect to find the EISA signature word. An IO with a base of 0x3 - will skip the test for the ADD_PORT. */ - if (ioaddr & 1) { - if (net_debug > 1) - printk(KERN_INFO "%s: odd ioaddr 0x%lx\n", dev->name, ioaddr); - if ((ioaddr & 2) != 2) - if ((readword(ioaddr & ~3, ADD_PORT) & ADD_MASK) != ADD_SIG) { - printk(KERN_ERR "%s: bad signature 0x%x\n", - dev->name, readword(ioaddr & ~3, ADD_PORT)); - retval = -ENODEV; - goto out2; - } - } - - ioaddr &= ~3; - printk(KERN_DEBUG "PP_addr at %lx[%x]: 0x%x\n", - ioaddr, ADD_PORT, readword(ioaddr, ADD_PORT)); - writeword(ioaddr, ADD_PORT, PP_ChipID); - - tmp = readword(ioaddr, DATA_PORT); - if (tmp != CHIP_EISA_ID_SIG) { - printk(KERN_DEBUG "%s: incorrect signature at %lx[%x]: 0x%x!=" - CHIP_EISA_ID_SIG_STR "\n", - dev->name, ioaddr, DATA_PORT, tmp); - retval = -ENODEV; - goto out2; - } - - /* Fill in the 'dev' fields. */ - dev->base_addr = ioaddr; - - /* get the chip type */ - rev_type = readreg(dev, PRODUCT_ID_ADD); - lp->chip_type = rev_type &~ REVISON_BITS; - lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A'; - - /* Check the chip type and revision in order to set the correct send command - CS8920 revision C and CS8900 revision F can use the faster send. */ - lp->send_cmd = TX_AFTER_381; - if (lp->chip_type == CS8900 && lp->chip_revision >= 'F') - lp->send_cmd = TX_NOW; - if (lp->chip_type != CS8900 && lp->chip_revision >= 'C') - lp->send_cmd = TX_NOW; - - if (net_debug && version_printed++ == 0) - printk(version); - - printk(KERN_INFO "%s: cs89%c0%s rev %c found at %#3lx ", - dev->name, - lp->chip_type==CS8900?'0':'2', - lp->chip_type==CS8920M?"M":"", - lp->chip_revision, - dev->base_addr); - reset_chip(dev); - - /* Here we read the current configuration of the chip. If there - is no Extended EEPROM then the idea is to not disturb the chip - configuration, it should have been correctly setup by automatic - EEPROM read on reset. So, if the chip says it read the EEPROM - the driver will always do *something* instead of complain that - adapter_cnf is 0. */ - - - if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) == - (EEPROM_OK|EEPROM_PRESENT)) { - /* Load the MAC. */ - for (i=0; i < ETH_ALEN/2; i++) { - unsigned int Addr; - Addr = readreg(dev, PP_IA+i*2); - dev->dev_addr[i*2] = Addr & 0xFF; - dev->dev_addr[i*2+1] = Addr >> 8; - } - - /* Load the Adapter Configuration. - Note: Barring any more specific information from some - other source (ie EEPROM+Schematics), we would not know - how to operate a 10Base2 interface on the AUI port. - However, since we do read the status of HCB1 and use - settings that always result in calls to control_dc_dc(dev,0) - a BNC interface should work if the enable pin - (dc/dc converter) is on HCB1. It will be called AUI - however. */ - - lp->adapter_cnf = 0; - i = readreg(dev, PP_LineCTL); - /* Preserve the setting of the HCB1 pin. */ - if ((i & (HCB1 | HCB1_ENBL)) == (HCB1 | HCB1_ENBL)) - lp->adapter_cnf |= A_CNF_DC_DC_POLARITY; - /* Save the sqelch bit */ - if ((i & LOW_RX_SQUELCH) == LOW_RX_SQUELCH) - lp->adapter_cnf |= A_CNF_EXTND_10B_2 | A_CNF_LOW_RX_SQUELCH; - /* Check if the card is in 10Base-t only mode */ - if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == 0) - lp->adapter_cnf |= A_CNF_10B_T | A_CNF_MEDIA_10B_T; - /* Check if the card is in AUI only mode */ - if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == AUI_ONLY) - lp->adapter_cnf |= A_CNF_AUI | A_CNF_MEDIA_AUI; - /* Check if the card is in Auto mode. */ - if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == AUTO_AUI_10BASET) - lp->adapter_cnf |= A_CNF_AUI | A_CNF_10B_T | - A_CNF_MEDIA_AUI | A_CNF_MEDIA_10B_T | A_CNF_MEDIA_AUTO; - - if (net_debug > 1) - printk(KERN_INFO "%s: PP_LineCTL=0x%x, adapter_cnf=0x%x\n", - dev->name, i, lp->adapter_cnf); - - /* IRQ. Other chips already probe, see below. */ - if (lp->chip_type == CS8900) - lp->isa_config = readreg(dev, PP_CS8900_ISAINT) & INT_NO_MASK; - - printk( "[Cirrus EEPROM] "); - } - - printk("\n"); - - /* First check to see if an EEPROM is attached. */ - - if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0) - printk(KERN_WARNING "cs89x0: No EEPROM, relying on command line....\n"); - else if (get_eeprom_data(dev, START_EEPROM_DATA,CHKSUM_LEN,eeprom_buff) < 0) { - printk(KERN_WARNING "\ncs89x0: EEPROM read failed, relying on command line.\n"); - } else if (get_eeprom_cksum(START_EEPROM_DATA,CHKSUM_LEN,eeprom_buff) < 0) { - /* Check if the chip was able to read its own configuration starting - at 0 in the EEPROM*/ - if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) != - (EEPROM_OK|EEPROM_PRESENT)) - printk(KERN_WARNING "cs89x0: Extended EEPROM checksum bad and no Cirrus EEPROM, relying on command line\n"); - - } else { - /* This reads an extended EEPROM that is not documented - in the CS8900 datasheet. */ - - /* get transmission control word but keep the autonegotiation bits */ - if (!lp->auto_neg_cnf) lp->auto_neg_cnf = eeprom_buff[AUTO_NEG_CNF_OFFSET/2]; - /* Store adapter configuration */ - if (!lp->adapter_cnf) lp->adapter_cnf = eeprom_buff[ADAPTER_CNF_OFFSET/2]; - /* Store ISA configuration */ - lp->isa_config = eeprom_buff[ISA_CNF_OFFSET/2]; - dev->mem_start = eeprom_buff[PACKET_PAGE_OFFSET/2] << 8; - - /* eeprom_buff has 32-bit ints, so we can't just memcpy it */ - /* store the initial memory base address */ - for (i = 0; i < ETH_ALEN/2; i++) { - dev->dev_addr[i*2] = eeprom_buff[i]; - dev->dev_addr[i*2+1] = eeprom_buff[i] >> 8; - } - if (net_debug > 1) - printk(KERN_DEBUG "%s: new adapter_cnf: 0x%x\n", - dev->name, lp->adapter_cnf); - } - - /* allow them to force multiple transceivers. If they force multiple, autosense */ - { - int count = 0; - if (lp->force & FORCE_RJ45) {lp->adapter_cnf |= A_CNF_10B_T; count++; } - if (lp->force & FORCE_AUI) {lp->adapter_cnf |= A_CNF_AUI; count++; } - if (lp->force & FORCE_BNC) {lp->adapter_cnf |= A_CNF_10B_2; count++; } - if (count > 1) {lp->adapter_cnf |= A_CNF_MEDIA_AUTO; } - else if (lp->force & FORCE_RJ45){lp->adapter_cnf |= A_CNF_MEDIA_10B_T; } - else if (lp->force & FORCE_AUI) {lp->adapter_cnf |= A_CNF_MEDIA_AUI; } - else if (lp->force & FORCE_BNC) {lp->adapter_cnf |= A_CNF_MEDIA_10B_2; } - } - - if (net_debug > 1) - printk(KERN_DEBUG "%s: after force 0x%x, adapter_cnf=0x%x\n", - dev->name, lp->force, lp->adapter_cnf); - - /* FIXME: We don't let you set dc-dc polarity or low RX squelch from the command line: add it here */ - - /* FIXME: We don't let you set the IMM bit from the command line: add it to lp->auto_neg_cnf here */ - - /* FIXME: we don't set the Ethernet address on the command line. Use - ifconfig IFACE hw ether AABBCCDDEEFF */ - - printk(KERN_INFO "cs89x0 media %s%s%s", - (lp->adapter_cnf & A_CNF_10B_T)?"RJ-45,":"", - (lp->adapter_cnf & A_CNF_AUI)?"AUI,":"", - (lp->adapter_cnf & A_CNF_10B_2)?"BNC,":""); - - lp->irq_map = 0xffff; - - /* If this is a CS8900 then no pnp soft */ - if (lp->chip_type != CS8900 && - /* Check if the ISA IRQ has been set */ - (i = readreg(dev, PP_CS8920_ISAINT) & 0xff, - (i != 0 && i < CS8920_NO_INTS))) { - if (!dev->irq) - dev->irq = i; - } else { - i = lp->isa_config & INT_NO_MASK; + if (chip_type == CS8900) { #ifndef CONFIG_CS89x0_PLATFORM - if (lp->chip_type == CS8900) { -#ifdef CS89x0_NONISA_IRQ - i = cs8900_irq_map[0]; + /* Search the mapping table for the corresponding IRQ pin. */ + for (i = 0; i != ARRAY_SIZE(cs8900_irq_map); i++) + if (cs8900_irq_map[i] == irq) + break; + /* Not found */ + if (i == ARRAY_SIZE(cs8900_irq_map)) + i = 3; #else - /* Translate the IRQ using the IRQ mapping table. */ - if (i >= ARRAY_SIZE(cs8900_irq_map)) - printk("\ncs89x0: invalid ISA interrupt number %d\n", i); - else - i = cs8900_irq_map[i]; - - lp->irq_map = CS8900_IRQ_MAP; /* fixed IRQ map for CS8900 */ - } else { - int irq_map_buff[IRQ_MAP_LEN/2]; - - if (get_eeprom_data(dev, IRQ_MAP_EEPROM_DATA, - IRQ_MAP_LEN/2, - irq_map_buff) >= 0) { - if ((irq_map_buff[0] & 0xff) == PNP_IRQ_FRMT) - lp->irq_map = (irq_map_buff[0]>>8) | (irq_map_buff[1] << 8); - } -#endif - } -#endif - if (!dev->irq) - dev->irq = i; - } - - printk(" IRQ %d", dev->irq); - -#if ALLOW_DMA - if (lp->use_dma) { - get_dma_channel(dev); - printk(", DMA %d", dev->dma); - } - else + /* INTRQ0 pin is used for interrupt generation. */ + i = 0; #endif - { - printk(", programmed I/O"); + writereg(dev, PP_CS8900_ISAINT, i); + } else { + writereg(dev, PP_CS8920_ISAINT, irq); } - - /* print the ethernet address. */ - printk(", MAC %pM", dev->dev_addr); - - dev->netdev_ops = &net_ops; - dev->watchdog_timeo = HZ; - - printk("\n"); - if (net_debug) - printk("cs89x0_probe1() successful\n"); - - retval = register_netdev(dev); - if (retval) - goto out3; - return 0; -out3: - writeword(dev->base_addr, ADD_PORT, PP_ChipID); -out2: - release_region(ioaddr & ~3, NETCARD_IO_EXTENT); -out1: - return retval; } +static void +count_rx_errors(int status, struct net_device *dev) +{ + dev->stats.rx_errors++; + if (status & RX_RUNT) + dev->stats.rx_length_errors++; + if (status & RX_EXTRA_DATA) + dev->stats.rx_length_errors++; + if ((status & RX_CRC_ERROR) && !(status & (RX_EXTRA_DATA | RX_RUNT))) + /* per str 172 */ + dev->stats.rx_crc_errors++; + if (status & RX_DRIBBLE) + dev->stats.rx_frame_errors++; +} /********************************* * This page contains DMA routines -**********************************/ + *********************************/ #if ALLOW_DMA -#define dma_page_eq(ptr1, ptr2) ((long)(ptr1)>>17 == (long)(ptr2)>>17) +#define dma_page_eq(ptr1, ptr2) ((long)(ptr1) >> 17 == (long)(ptr2) >> 17) static void get_dma_channel(struct net_device *dev) @@ -833,11 +402,10 @@ write_dma(struct net_device *dev, int chip_type, int dma) struct net_local *lp = netdev_priv(dev); if ((lp->isa_config & ANY_ISA_DMA) == 0) return; - if (chip_type == CS8900) { - writereg(dev, PP_CS8900_ISADMA, dma-5); - } else { + if (chip_type == CS8900) + writereg(dev, PP_CS8900_ISADMA, dma - 5); + else writereg(dev, PP_CS8920_ISADMA, dma); - } } static void @@ -847,18 +415,15 @@ set_dma_cfg(struct net_device *dev) if (lp->use_dma) { if ((lp->isa_config & ANY_ISA_DMA) == 0) { - if (net_debug > 3) - printk("set_dma_cfg(): no DMA\n"); + cs89_dbg(3, err, "set_dma_cfg(): no DMA\n"); return; } if (lp->isa_config & ISA_RxDMA) { lp->curr_rx_cfg |= RX_DMA_ONLY; - if (net_debug > 3) - printk("set_dma_cfg(): RX_DMA_ONLY\n"); + cs89_dbg(3, info, "set_dma_cfg(): RX_DMA_ONLY\n"); } else { lp->curr_rx_cfg |= AUTO_RX_DMA; /* not that we support it... */ - if (net_debug > 3) - printk("set_dma_cfg(): AUTO_RX_DMA\n"); + cs89_dbg(3, info, "set_dma_cfg(): AUTO_RX_DMA\n"); } } } @@ -868,7 +433,7 @@ dma_bufcfg(struct net_device *dev) { struct net_local *lp = netdev_priv(dev); if (lp->use_dma) - return (lp->isa_config & ANY_ISA_DMA)? RX_DMA_ENBL : 0; + return (lp->isa_config & ANY_ISA_DMA) ? RX_DMA_ENBL : 0; else return 0; } @@ -898,13 +463,13 @@ dma_rx(struct net_device *dev) int status, length; unsigned char *bp = lp->rx_dma_ptr; - status = bp[0] + (bp[1]<<8); - length = bp[2] + (bp[3]<<8); + status = bp[0] + (bp[1] << 8); + length = bp[2] + (bp[3] << 8); bp += 4; - if (net_debug > 5) { - printk( "%s: receiving DMA packet at %lx, status %x, length %x\n", - dev->name, (unsigned long)bp, status, length); - } + + cs89_dbg(5, debug, "%s: receiving DMA packet at %lx, status %x, length %x\n", + dev->name, (unsigned long)bp, status, length); + if ((status & RX_OK) == 0) { count_rx_errors(status, dev); goto skip_this_frame; @@ -913,14 +478,16 @@ dma_rx(struct net_device *dev) /* Malloc up new buffer. */ skb = netdev_alloc_skb(dev, length + 2); if (skb == NULL) { - if (net_debug) /* I don't think we want to do this to a stressed system */ - printk("%s: Memory squeeze, dropping packet.\n", dev->name); + /* I don't think we want to do this to a stressed system */ + cs89_dbg(0, err, "%s: Memory squeeze, dropping packet\n", + dev->name); dev->stats.rx_dropped++; /* AKPM: advance bp to the next frame */ skip_this_frame: bp += (length + 3) & ~3; - if (bp >= lp->end_dma_buff) bp -= lp->dmasize*1024; + if (bp >= lp->end_dma_buff) + bp -= lp->dmasize * 1024; lp->rx_dma_ptr = bp; return; } @@ -928,63 +495,38 @@ skip_this_frame: if (bp + length > lp->end_dma_buff) { int semi_cnt = lp->end_dma_buff - bp; - memcpy(skb_put(skb,semi_cnt), bp, semi_cnt); - memcpy(skb_put(skb,length - semi_cnt), lp->dma_buff, + memcpy(skb_put(skb, semi_cnt), bp, semi_cnt); + memcpy(skb_put(skb, length - semi_cnt), lp->dma_buff, length - semi_cnt); } else { - memcpy(skb_put(skb,length), bp, length); + memcpy(skb_put(skb, length), bp, length); } bp += (length + 3) & ~3; - if (bp >= lp->end_dma_buff) bp -= lp->dmasize*1024; + if (bp >= lp->end_dma_buff) + bp -= lp->dmasize*1024; lp->rx_dma_ptr = bp; - if (net_debug > 3) { - printk( "%s: received %d byte DMA packet of type %x\n", - dev->name, length, - (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]); - } - skb->protocol=eth_type_trans(skb,dev); + cs89_dbg(3, info, "%s: received %d byte DMA packet of type %x\n", + dev->name, length, + ((skb->data[ETH_ALEN + ETH_ALEN] << 8) | + skb->data[ETH_ALEN + ETH_ALEN + 1])); + + skb->protocol = eth_type_trans(skb, dev); netif_rx(skb); dev->stats.rx_packets++; dev->stats.rx_bytes += length; } -#endif /* ALLOW_DMA */ - -static void __init reset_chip(struct net_device *dev) +static void release_dma_buff(struct net_local *lp) { -#if !defined(CONFIG_MACH_MX31ADS) -#if !defined(CS89x0_NONISA_IRQ) - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; -#endif /* CS89x0_NONISA_IRQ */ - int reset_start_time; - - writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET); - - /* wait 30 ms */ - msleep(30); - -#if !defined(CS89x0_NONISA_IRQ) - if (lp->chip_type != CS8900) { - /* Hardware problem requires PNP registers to be reconfigured after a reset */ - writeword(ioaddr, ADD_PORT, PP_CS8920_ISAINT); - outb(dev->irq, ioaddr + DATA_PORT); - outb(0, ioaddr + DATA_PORT + 1); - - writeword(ioaddr, ADD_PORT, PP_CS8920_ISAMemB); - outb((dev->mem_start >> 16) & 0xff, ioaddr + DATA_PORT); - outb((dev->mem_start >> 8) & 0xff, ioaddr + DATA_PORT + 1); + if (lp->dma_buff) { + free_pages((unsigned long)(lp->dma_buff), + get_order(lp->dmasize * 1024)); + lp->dma_buff = NULL; } -#endif /* CS89x0_NONISA_IRQ */ - - /* Wait until the chip is reset */ - reset_start_time = jiffies; - while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2) - ; -#endif /* !CONFIG_MACH_MX31ADS */ } +#endif /* ALLOW_DMA */ static void control_dc_dc(struct net_device *dev, int on_not_off) @@ -993,8 +535,9 @@ control_dc_dc(struct net_device *dev, int on_not_off) unsigned int selfcontrol; int timenow = jiffies; /* control the DC to DC convertor in the SelfControl register. - Note: This is hooked up to a general purpose pin, might not - always be a DC to DC convertor. */ + * Note: This is hooked up to a general purpose pin, might not + * always be a DC to DC convertor. + */ selfcontrol = HCB1_ENBL; /* Enable the HCB1 bit as an output */ if (((lp->adapter_cnf & A_CNF_DC_DC_POLARITY) != 0) ^ on_not_off) @@ -1008,6 +551,49 @@ control_dc_dc(struct net_device *dev, int on_not_off) ; } +/* send a test packet - return true if carrier bits are ok */ +static int +send_test_pkt(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + char test_packet[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 46, /* A 46 in network order */ + 0, 0, /* DSAP=0 & SSAP=0 fields */ + 0xf3, 0 /* Control (Test Req + P bit set) */ + }; + long timenow = jiffies; + + writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_TX_ON); + + memcpy(test_packet, dev->dev_addr, ETH_ALEN); + memcpy(test_packet + ETH_ALEN, dev->dev_addr, ETH_ALEN); + + iowrite16(TX_AFTER_ALL, lp->virt_addr + TX_CMD_PORT); + iowrite16(ETH_ZLEN, lp->virt_addr + TX_LEN_PORT); + + /* Test to see if the chip has allocated memory for the packet */ + while (jiffies - timenow < 5) + if (readreg(dev, PP_BusST) & READY_FOR_TX_NOW) + break; + if (jiffies - timenow >= 5) + return 0; /* this shouldn't happen */ + + /* Write the contents of the packet */ + writewords(lp, TX_FRAME_PORT, test_packet, (ETH_ZLEN + 1) >> 1); + + cs89_dbg(1, debug, "Sending test packet "); + /* wait a couple of jiffies for packet to be received */ + for (timenow = jiffies; jiffies - timenow < 3;) + ; + if ((readreg(dev, PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) { + cs89_dbg(1, cont, "succeeded\n"); + return 1; + } + cs89_dbg(1, cont, "failed\n"); + return 0; +} + #define DETECTED_NONE 0 #define DETECTED_RJ45H 1 #define DETECTED_RJ45F 2 @@ -1021,40 +607,46 @@ detect_tp(struct net_device *dev) int timenow = jiffies; int fdx; - if (net_debug > 1) printk("%s: Attempting TP\n", dev->name); + cs89_dbg(1, debug, "%s: Attempting TP\n", dev->name); - /* If connected to another full duplex capable 10-Base-T card the link pulses - seem to be lost when the auto detect bit in the LineCTL is set. - To overcome this the auto detect bit will be cleared whilst testing the - 10-Base-T interface. This would not be necessary for the sparrow chip but - is simpler to do it anyway. */ - writereg(dev, PP_LineCTL, lp->linectl &~ AUI_ONLY); + /* If connected to another full duplex capable 10-Base-T card + * the link pulses seem to be lost when the auto detect bit in + * the LineCTL is set. To overcome this the auto detect bit will + * be cleared whilst testing the 10-Base-T interface. This would + * not be necessary for the sparrow chip but is simpler to do it + * anyway. + */ + writereg(dev, PP_LineCTL, lp->linectl & ~AUI_ONLY); control_dc_dc(dev, 0); - /* Delay for the hardware to work out if the TP cable is present - 150ms */ - for (timenow = jiffies; jiffies - timenow < 15; ) - ; + /* Delay for the hardware to work out if the TP cable is present + * - 150ms + */ + for (timenow = jiffies; jiffies - timenow < 15;) + ; if ((readreg(dev, PP_LineST) & LINK_OK) == 0) return DETECTED_NONE; if (lp->chip_type == CS8900) { - switch (lp->force & 0xf0) { + switch (lp->force & 0xf0) { #if 0 - case FORCE_AUTO: - printk("%s: cs8900 doesn't autonegotiate\n",dev->name); - return DETECTED_NONE; + case FORCE_AUTO: + pr_info("%s: cs8900 doesn't autonegotiate\n", + dev->name); + return DETECTED_NONE; #endif - /* CS8900 doesn't support AUTO, change to HALF*/ - case FORCE_AUTO: + /* CS8900 doesn't support AUTO, change to HALF*/ + case FORCE_AUTO: lp->force &= ~FORCE_AUTO; - lp->force |= FORCE_HALF; + lp->force |= FORCE_HALF; break; case FORCE_HALF: break; - case FORCE_FULL: - writereg(dev, PP_TestCTL, readreg(dev, PP_TestCTL) | FDX_8900); + case FORCE_FULL: + writereg(dev, PP_TestCTL, + readreg(dev, PP_TestCTL) | FDX_8900); break; - } + } fdx = readreg(dev, PP_TestCTL) & FDX_8900; } else { switch (lp->force & 0xf0) { @@ -1067,15 +659,15 @@ detect_tp(struct net_device *dev) case FORCE_FULL: lp->auto_neg_cnf = RE_NEG_NOW | ALLOW_FDX; break; - } + } writereg(dev, PP_AutoNegCTL, lp->auto_neg_cnf & AUTO_NEG_MASK); if ((lp->auto_neg_cnf & AUTO_NEG_BITS) == AUTO_NEG_ENABLE) { - printk(KERN_INFO "%s: negotiating duplex...\n",dev->name); + pr_info("%s: negotiating duplex...\n", dev->name); while (readreg(dev, PP_AutoNegST) & AUTO_NEG_BUSY) { if (jiffies - timenow > 4000) { - printk(KERN_ERR "**** Full / half duplex auto-negotiation timed out ****\n"); + pr_err("**** Full / half duplex auto-negotiation timed out ****\n"); break; } } @@ -1088,56 +680,31 @@ detect_tp(struct net_device *dev) return DETECTED_RJ45H; } -/* send a test packet - return true if carrier bits are ok */ static int -send_test_pkt(struct net_device *dev) +detect_bnc(struct net_device *dev) { - char test_packet[] = { 0,0,0,0,0,0, 0,0,0,0,0,0, - 0, 46, /* A 46 in network order */ - 0, 0, /* DSAP=0 & SSAP=0 fields */ - 0xf3, 0 /* Control (Test Req + P bit set) */ }; - long timenow = jiffies; - - writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_TX_ON); - - memcpy(test_packet, dev->dev_addr, ETH_ALEN); - memcpy(test_packet+ETH_ALEN, dev->dev_addr, ETH_ALEN); - - writeword(dev->base_addr, TX_CMD_PORT, TX_AFTER_ALL); - writeword(dev->base_addr, TX_LEN_PORT, ETH_ZLEN); + struct net_local *lp = netdev_priv(dev); - /* Test to see if the chip has allocated memory for the packet */ - while (jiffies - timenow < 5) - if (readreg(dev, PP_BusST) & READY_FOR_TX_NOW) - break; - if (jiffies - timenow >= 5) - return 0; /* this shouldn't happen */ + cs89_dbg(1, debug, "%s: Attempting BNC\n", dev->name); + control_dc_dc(dev, 1); - /* Write the contents of the packet */ - writewords(dev->base_addr, TX_FRAME_PORT,test_packet,(ETH_ZLEN+1) >>1); + writereg(dev, PP_LineCTL, (lp->linectl & ~AUTO_AUI_10BASET) | AUI_ONLY); - if (net_debug > 1) printk("Sending test packet "); - /* wait a couple of jiffies for packet to be received */ - for (timenow = jiffies; jiffies - timenow < 3; ) - ; - if ((readreg(dev, PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) { - if (net_debug > 1) printk("succeeded\n"); - return 1; - } - if (net_debug > 1) printk("failed\n"); - return 0; + if (send_test_pkt(dev)) + return DETECTED_BNC; + else + return DETECTED_NONE; } - static int detect_aui(struct net_device *dev) { struct net_local *lp = netdev_priv(dev); - if (net_debug > 1) printk("%s: Attempting AUI\n", dev->name); + cs89_dbg(1, debug, "%s: Attempting AUI\n", dev->name); control_dc_dc(dev, 0); - writereg(dev, PP_LineCTL, (lp->linectl &~ AUTO_AUI_10BASET) | AUI_ONLY); + writereg(dev, PP_LineCTL, (lp->linectl & ~AUTO_AUI_10BASET) | AUI_ONLY); if (send_test_pkt(dev)) return DETECTED_AUI; @@ -1145,45 +712,154 @@ detect_aui(struct net_device *dev) return DETECTED_NONE; } -static int -detect_bnc(struct net_device *dev) +/* We have a good packet(s), get it/them out of the buffers. */ +static void +net_rx(struct net_device *dev) { struct net_local *lp = netdev_priv(dev); + struct sk_buff *skb; + int status, length; - if (net_debug > 1) printk("%s: Attempting BNC\n", dev->name); - control_dc_dc(dev, 1); + status = ioread16(lp->virt_addr + RX_FRAME_PORT); + length = ioread16(lp->virt_addr + RX_FRAME_PORT); - writereg(dev, PP_LineCTL, (lp->linectl &~ AUTO_AUI_10BASET) | AUI_ONLY); + if ((status & RX_OK) == 0) { + count_rx_errors(status, dev); + return; + } - if (send_test_pkt(dev)) - return DETECTED_BNC; - else - return DETECTED_NONE; + /* Malloc up new buffer. */ + skb = netdev_alloc_skb(dev, length + 2); + if (skb == NULL) { +#if 0 /* Again, this seems a cruel thing to do */ + pr_warn("%s: Memory squeeze, dropping packet\n", dev->name); +#endif + dev->stats.rx_dropped++; + return; + } + skb_reserve(skb, 2); /* longword align L3 header */ + + readwords(lp, RX_FRAME_PORT, skb_put(skb, length), length >> 1); + if (length & 1) + skb->data[length-1] = ioread16(lp->virt_addr + RX_FRAME_PORT); + + cs89_dbg(3, debug, "%s: received %d byte packet of type %x\n", + dev->name, length, + (skb->data[ETH_ALEN + ETH_ALEN] << 8) | + skb->data[ETH_ALEN + ETH_ALEN + 1]); + + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; + dev->stats.rx_bytes += length; } +/* The typical workload of the driver: + * Handle the network interface interrupts. + */ -static void -write_irq(struct net_device *dev, int chip_type, int irq) +static irqreturn_t net_interrupt(int irq, void *dev_id) { - int i; + struct net_device *dev = dev_id; + struct net_local *lp; + int status; + int handled = 0; - if (chip_type == CS8900) { -#ifndef CONFIG_CS89x0_PLATFORM - /* Search the mapping table for the corresponding IRQ pin. */ - for (i = 0; i != ARRAY_SIZE(cs8900_irq_map); i++) - if (cs8900_irq_map[i] == irq) - break; - /* Not found */ - if (i == ARRAY_SIZE(cs8900_irq_map)) - i = 3; -#else - /* INTRQ0 pin is used for interrupt generation. */ - i = 0; + lp = netdev_priv(dev); + + /* we MUST read all the events out of the ISQ, otherwise we'll never + * get interrupted again. As a consequence, we can't have any limit + * on the number of times we loop in the interrupt handler. The + * hardware guarantees that eventually we'll run out of events. Of + * course, if you're on a slow machine, and packets are arriving + * faster than you can read them off, you're screwed. Hasta la + * vista, baby! + */ + while ((status = ioread16(lp->virt_addr + ISQ_PORT))) { + cs89_dbg(4, debug, "%s: event=%04x\n", dev->name, status); + handled = 1; + switch (status & ISQ_EVENT_MASK) { + case ISQ_RECEIVER_EVENT: + /* Got a packet(s). */ + net_rx(dev); + break; + case ISQ_TRANSMITTER_EVENT: + dev->stats.tx_packets++; + netif_wake_queue(dev); /* Inform upper layers. */ + if ((status & (TX_OK | + TX_LOST_CRS | + TX_SQE_ERROR | + TX_LATE_COL | + TX_16_COL)) != TX_OK) { + if ((status & TX_OK) == 0) + dev->stats.tx_errors++; + if (status & TX_LOST_CRS) + dev->stats.tx_carrier_errors++; + if (status & TX_SQE_ERROR) + dev->stats.tx_heartbeat_errors++; + if (status & TX_LATE_COL) + dev->stats.tx_window_errors++; + if (status & TX_16_COL) + dev->stats.tx_aborted_errors++; + } + break; + case ISQ_BUFFER_EVENT: + if (status & READY_FOR_TX) { + /* we tried to transmit a packet earlier, + * but inexplicably ran out of buffers. + * That shouldn't happen since we only ever + * load one packet. Shrug. Do the right + * thing anyway. + */ + netif_wake_queue(dev); /* Inform upper layers. */ + } + if (status & TX_UNDERRUN) { + cs89_dbg(0, err, "%s: transmit underrun\n", + dev->name); + lp->send_underrun++; + if (lp->send_underrun == 3) + lp->send_cmd = TX_AFTER_381; + else if (lp->send_underrun == 6) + lp->send_cmd = TX_AFTER_ALL; + /* transmit cycle is done, although + * frame wasn't transmitted - this + * avoids having to wait for the upper + * layers to timeout on us, in the + * event of a tx underrun + */ + netif_wake_queue(dev); /* Inform upper layers. */ + } +#if ALLOW_DMA + if (lp->use_dma && (status & RX_DMA)) { + int count = readreg(dev, PP_DmaFrameCnt); + while (count) { + cs89_dbg(5, debug, + "%s: receiving %d DMA frames\n", + dev->name, count); + if (count > 1) + cs89_dbg(2, debug, + "%s: receiving %d DMA frames\n", + dev->name, count); + dma_rx(dev); + if (--count == 0) + count = readreg(dev, PP_DmaFrameCnt); + if (count > 0) + cs89_dbg(2, debug, + "%s: continuing with %d DMA frames\n", + dev->name, count); + } + } #endif - writereg(dev, PP_CS8900_ISAINT, i); - } else { - writereg(dev, PP_CS8920_ISAINT, irq); + break; + case ISQ_RX_MISS_EVENT: + dev->stats.rx_missed_errors += (status >> 6); + break; + case ISQ_TX_COL_EVENT: + dev->stats.collisions += (status >> 6); + break; + } } + return IRQ_RETVAL(handled); } /* Open/initialize the board. This is called (in the current kernel) @@ -1192,7 +868,7 @@ write_irq(struct net_device *dev, int chip_type, int irq) This routine should set everything up anew at each open, even registers that "should" only need to be set once at boot, so that there is non-reboot way to recover if something goes wrong. - */ +*/ /* AKPM: do we need to do any locking here? */ @@ -1208,14 +884,15 @@ net_open(struct net_device *dev) /* Allow interrupts to be generated by the chip */ /* Cirrus' release had this: */ #if 0 - writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL)|ENABLE_IRQ ); + writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) | ENABLE_IRQ); #endif /* And 2.3.47 had this: */ writereg(dev, PP_BusCTL, ENABLE_IRQ | MEMORY_ON); for (i = 2; i < CS8920_NO_INTS; i++) { if ((1 << i) & lp->irq_map) { - if (request_irq(i, net_interrupt, 0, dev->name, dev) == 0) { + if (request_irq(i, net_interrupt, 0, dev->name, + dev) == 0) { dev->irq = i; write_irq(dev, lp->chip_type, i); /* writereg(dev, PP_BufCFG, GENERATE_SW_INTERRUPT); */ @@ -1226,23 +903,21 @@ net_open(struct net_device *dev) if (i >= CS8920_NO_INTS) { writereg(dev, PP_BusCTL, 0); /* disable interrupts. */ - printk(KERN_ERR "cs89x0: can't get an interrupt\n"); + pr_err("can't get an interrupt\n"); ret = -EAGAIN; goto bad_out; } - } - else - { + } else { #if !defined(CS89x0_NONISA_IRQ) && !defined(CONFIG_CS89x0_PLATFORM) if (((1 << dev->irq) & lp->irq_map) == 0) { - printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n", - dev->name, dev->irq, lp->irq_map); + pr_err("%s: IRQ %d is not in our map of allowable IRQs, which is %x\n", + dev->name, dev->irq, lp->irq_map); ret = -EAGAIN; goto bad_out; } #endif /* FIXME: Cirrus' release had this: */ - writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL)|ENABLE_IRQ ); + writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL)|ENABLE_IRQ); /* And 2.3.47 had this: */ #if 0 writereg(dev, PP_BusCTL, ENABLE_IRQ | MEMORY_ON); @@ -1250,147 +925,168 @@ net_open(struct net_device *dev) write_irq(dev, lp->chip_type, dev->irq); ret = request_irq(dev->irq, net_interrupt, 0, dev->name, dev); if (ret) { - printk(KERN_ERR "cs89x0: request_irq(%d) failed\n", dev->irq); + pr_err("request_irq(%d) failed\n", dev->irq); goto bad_out; } } #if ALLOW_DMA - if (lp->use_dma) { - if (lp->isa_config & ANY_ISA_DMA) { - unsigned long flags; - lp->dma_buff = (unsigned char *)__get_dma_pages(GFP_KERNEL, - get_order(lp->dmasize * 1024)); - - if (!lp->dma_buff) { - printk(KERN_ERR "%s: cannot get %dK memory for DMA\n", dev->name, lp->dmasize); - goto release_irq; - } - if (net_debug > 1) { - printk( "%s: dma %lx %lx\n", - dev->name, - (unsigned long)lp->dma_buff, - (unsigned long)isa_virt_to_bus(lp->dma_buff)); - } - if ((unsigned long) lp->dma_buff >= MAX_DMA_ADDRESS || - !dma_page_eq(lp->dma_buff, lp->dma_buff+lp->dmasize*1024-1)) { - printk(KERN_ERR "%s: not usable as DMA buffer\n", dev->name); - goto release_irq; - } - memset(lp->dma_buff, 0, lp->dmasize * 1024); /* Why? */ - if (request_dma(dev->dma, dev->name)) { - printk(KERN_ERR "%s: cannot get dma channel %d\n", dev->name, dev->dma); - goto release_irq; - } - write_dma(dev, lp->chip_type, dev->dma); - lp->rx_dma_ptr = lp->dma_buff; - lp->end_dma_buff = lp->dma_buff + lp->dmasize*1024; - spin_lock_irqsave(&lp->lock, flags); - disable_dma(dev->dma); - clear_dma_ff(dev->dma); - set_dma_mode(dev->dma, DMA_RX_MODE); /* auto_init as well */ - set_dma_addr(dev->dma, isa_virt_to_bus(lp->dma_buff)); - set_dma_count(dev->dma, lp->dmasize*1024); - enable_dma(dev->dma); - spin_unlock_irqrestore(&lp->lock, flags); + if (lp->use_dma && (lp->isa_config & ANY_ISA_DMA)) { + unsigned long flags; + lp->dma_buff = (unsigned char *)__get_dma_pages(GFP_KERNEL, + get_order(lp->dmasize * 1024)); + if (!lp->dma_buff) { + pr_err("%s: cannot get %dK memory for DMA\n", + dev->name, lp->dmasize); + goto release_irq; } + cs89_dbg(1, debug, "%s: dma %lx %lx\n", + dev->name, + (unsigned long)lp->dma_buff, + (unsigned long)isa_virt_to_bus(lp->dma_buff)); + if ((unsigned long)lp->dma_buff >= MAX_DMA_ADDRESS || + !dma_page_eq(lp->dma_buff, + lp->dma_buff + lp->dmasize * 1024 - 1)) { + pr_err("%s: not usable as DMA buffer\n", dev->name); + goto release_irq; + } + memset(lp->dma_buff, 0, lp->dmasize * 1024); /* Why? */ + if (request_dma(dev->dma, dev->name)) { + pr_err("%s: cannot get dma channel %d\n", + dev->name, dev->dma); + goto release_irq; + } + write_dma(dev, lp->chip_type, dev->dma); + lp->rx_dma_ptr = lp->dma_buff; + lp->end_dma_buff = lp->dma_buff + lp->dmasize * 1024; + spin_lock_irqsave(&lp->lock, flags); + disable_dma(dev->dma); + clear_dma_ff(dev->dma); + set_dma_mode(dev->dma, DMA_RX_MODE); /* auto_init as well */ + set_dma_addr(dev->dma, isa_virt_to_bus(lp->dma_buff)); + set_dma_count(dev->dma, lp->dmasize * 1024); + enable_dma(dev->dma); + spin_unlock_irqrestore(&lp->lock, flags); } #endif /* ALLOW_DMA */ /* set the Ethernet address */ - for (i=0; i < ETH_ALEN/2; i++) - writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8)); + for (i = 0; i < ETH_ALEN / 2; i++) + writereg(dev, PP_IA + i * 2, + (dev->dev_addr[i * 2] | + (dev->dev_addr[i * 2 + 1] << 8))); /* while we're testing the interface, leave interrupts disabled */ writereg(dev, PP_BusCTL, MEMORY_ON); /* Set the LineCTL quintuplet based on adapter configuration read from EEPROM */ - if ((lp->adapter_cnf & A_CNF_EXTND_10B_2) && (lp->adapter_cnf & A_CNF_LOW_RX_SQUELCH)) - lp->linectl = LOW_RX_SQUELCH; + if ((lp->adapter_cnf & A_CNF_EXTND_10B_2) && + (lp->adapter_cnf & A_CNF_LOW_RX_SQUELCH)) + lp->linectl = LOW_RX_SQUELCH; else - lp->linectl = 0; + lp->linectl = 0; - /* check to make sure that they have the "right" hardware available */ - switch(lp->adapter_cnf & A_CNF_MEDIA_TYPE) { - case A_CNF_MEDIA_10B_T: result = lp->adapter_cnf & A_CNF_10B_T; break; - case A_CNF_MEDIA_AUI: result = lp->adapter_cnf & A_CNF_AUI; break; - case A_CNF_MEDIA_10B_2: result = lp->adapter_cnf & A_CNF_10B_2; break; - default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2); - } - if (!result) { - printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name); + /* check to make sure that they have the "right" hardware available */ + switch (lp->adapter_cnf & A_CNF_MEDIA_TYPE) { + case A_CNF_MEDIA_10B_T: + result = lp->adapter_cnf & A_CNF_10B_T; + break; + case A_CNF_MEDIA_AUI: + result = lp->adapter_cnf & A_CNF_AUI; + break; + case A_CNF_MEDIA_10B_2: + result = lp->adapter_cnf & A_CNF_10B_2; + break; + default: + result = lp->adapter_cnf & (A_CNF_10B_T | + A_CNF_AUI | + A_CNF_10B_2); + } + if (!result) { + pr_err("%s: EEPROM is configured for unavailable media\n", + dev->name); release_dma: #if ALLOW_DMA free_dma(dev->dma); release_irq: release_dma_buff(lp); #endif - writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) & ~(SERIAL_TX_ON | SERIAL_RX_ON)); - free_irq(dev->irq, dev); + writereg(dev, PP_LineCTL, + readreg(dev, PP_LineCTL) & ~(SERIAL_TX_ON | SERIAL_RX_ON)); + free_irq(dev->irq, dev); ret = -EAGAIN; goto bad_out; } - /* set the hardware to the configured choice */ - switch(lp->adapter_cnf & A_CNF_MEDIA_TYPE) { + /* set the hardware to the configured choice */ + switch (lp->adapter_cnf & A_CNF_MEDIA_TYPE) { case A_CNF_MEDIA_10B_T: - result = detect_tp(dev); - if (result==DETECTED_NONE) { - printk(KERN_WARNING "%s: 10Base-T (RJ-45) has no cable\n", dev->name); - if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */ - result = DETECTED_RJ45H; /* Yes! I don't care if I see a link pulse */ - } + result = detect_tp(dev); + if (result == DETECTED_NONE) { + pr_warn("%s: 10Base-T (RJ-45) has no cable\n", + dev->name); + if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */ + result = DETECTED_RJ45H; /* Yes! I don't care if I see a link pulse */ + } break; case A_CNF_MEDIA_AUI: - result = detect_aui(dev); - if (result==DETECTED_NONE) { - printk(KERN_WARNING "%s: 10Base-5 (AUI) has no cable\n", dev->name); - if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */ - result = DETECTED_AUI; /* Yes! I don't care if I see a carrrier */ - } + result = detect_aui(dev); + if (result == DETECTED_NONE) { + pr_warn("%s: 10Base-5 (AUI) has no cable\n", dev->name); + if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */ + result = DETECTED_AUI; /* Yes! I don't care if I see a carrrier */ + } break; case A_CNF_MEDIA_10B_2: - result = detect_bnc(dev); - if (result==DETECTED_NONE) { - printk(KERN_WARNING "%s: 10Base-2 (BNC) has no cable\n", dev->name); - if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */ - result = DETECTED_BNC; /* Yes! I don't care if I can xmit a packet */ - } + result = detect_bnc(dev); + if (result == DETECTED_NONE) { + pr_warn("%s: 10Base-2 (BNC) has no cable\n", dev->name); + if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */ + result = DETECTED_BNC; /* Yes! I don't care if I can xmit a packet */ + } break; case A_CNF_MEDIA_AUTO: writereg(dev, PP_LineCTL, lp->linectl | AUTO_AUI_10BASET); - if (lp->adapter_cnf & A_CNF_10B_T) - if ((result = detect_tp(dev)) != DETECTED_NONE) + if (lp->adapter_cnf & A_CNF_10B_T) { + result = detect_tp(dev); + if (result != DETECTED_NONE) break; - if (lp->adapter_cnf & A_CNF_AUI) - if ((result = detect_aui(dev)) != DETECTED_NONE) + } + if (lp->adapter_cnf & A_CNF_AUI) { + result = detect_aui(dev); + if (result != DETECTED_NONE) break; - if (lp->adapter_cnf & A_CNF_10B_2) - if ((result = detect_bnc(dev)) != DETECTED_NONE) + } + if (lp->adapter_cnf & A_CNF_10B_2) { + result = detect_bnc(dev); + if (result != DETECTED_NONE) break; - printk(KERN_ERR "%s: no media detected\n", dev->name); + } + pr_err("%s: no media detected\n", dev->name); goto release_dma; } - switch(result) { + switch (result) { case DETECTED_NONE: - printk(KERN_ERR "%s: no network cable attached to configured media\n", dev->name); + pr_err("%s: no network cable attached to configured media\n", + dev->name); goto release_dma; case DETECTED_RJ45H: - printk(KERN_INFO "%s: using half-duplex 10Base-T (RJ-45)\n", dev->name); + pr_info("%s: using half-duplex 10Base-T (RJ-45)\n", dev->name); break; case DETECTED_RJ45F: - printk(KERN_INFO "%s: using full-duplex 10Base-T (RJ-45)\n", dev->name); + pr_info("%s: using full-duplex 10Base-T (RJ-45)\n", dev->name); break; case DETECTED_AUI: - printk(KERN_INFO "%s: using 10Base-5 (AUI)\n", dev->name); + pr_info("%s: using 10Base-5 (AUI)\n", dev->name); break; case DETECTED_BNC: - printk(KERN_INFO "%s: using 10Base-2 (BNC)\n", dev->name); + pr_info("%s: using 10Base-2 (BNC)\n", dev->name); break; } /* Turn on both receive and transmit operations */ - writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON); + writereg(dev, PP_LineCTL, + readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON); /* Receive only error free packets addressed to this card */ lp->rx_mode = 0; @@ -1405,358 +1101,653 @@ release_irq: #endif writereg(dev, PP_RxCFG, lp->curr_rx_cfg); - writereg(dev, PP_TxCFG, TX_LOST_CRS_ENBL | TX_SQE_ERROR_ENBL | TX_OK_ENBL | - TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL); + writereg(dev, PP_TxCFG, (TX_LOST_CRS_ENBL | + TX_SQE_ERROR_ENBL | + TX_OK_ENBL | + TX_LATE_COL_ENBL | + TX_JBR_ENBL | + TX_ANY_COL_ENBL | + TX_16_COL_ENBL)); - writereg(dev, PP_BufCFG, READY_FOR_TX_ENBL | RX_MISS_COUNT_OVRFLOW_ENBL | + writereg(dev, PP_BufCFG, (READY_FOR_TX_ENBL | + RX_MISS_COUNT_OVRFLOW_ENBL | #if ALLOW_DMA - dma_bufcfg(dev) | + dma_bufcfg(dev) | #endif - TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL); + TX_COL_COUNT_OVRFLOW_ENBL | + TX_UNDERRUN_ENBL)); /* now that we've got our act together, enable everything */ - writereg(dev, PP_BusCTL, ENABLE_IRQ - | (dev->mem_start?MEMORY_ON : 0) /* turn memory on */ + writereg(dev, PP_BusCTL, (ENABLE_IRQ + | (dev->mem_start ? MEMORY_ON : 0) /* turn memory on */ #if ALLOW_DMA - | dma_busctl(dev) + | dma_busctl(dev) #endif - ); - netif_start_queue(dev); - if (net_debug > 1) - printk("cs89x0: net_open() succeeded\n"); + )); + netif_start_queue(dev); + cs89_dbg(1, debug, "net_open() succeeded\n"); return 0; bad_out: return ret; } +/* The inverse routine to net_open(). */ +static int +net_close(struct net_device *dev) +{ +#if ALLOW_DMA + struct net_local *lp = netdev_priv(dev); +#endif + + netif_stop_queue(dev); + + writereg(dev, PP_RxCFG, 0); + writereg(dev, PP_TxCFG, 0); + writereg(dev, PP_BufCFG, 0); + writereg(dev, PP_BusCTL, 0); + + free_irq(dev->irq, dev); + +#if ALLOW_DMA + if (lp->use_dma && lp->dma) { + free_dma(dev->dma); + release_dma_buff(lp); + } +#endif + + /* Update the statistics here. */ + return 0; +} + +/* Get the current statistics. + * This may be called with the card open or closed. + */ +static struct net_device_stats * +net_get_stats(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + unsigned long flags; + + spin_lock_irqsave(&lp->lock, flags); + /* Update the statistics from the device registers. */ + dev->stats.rx_missed_errors += (readreg(dev, PP_RxMiss) >> 6); + dev->stats.collisions += (readreg(dev, PP_TxCol) >> 6); + spin_unlock_irqrestore(&lp->lock, flags); + + return &dev->stats; +} + static void net_timeout(struct net_device *dev) { /* If we get here, some higher level has decided we are broken. There should really be a "kick me" function call instead. */ - if (net_debug > 0) printk("%s: transmit timed out, %s?\n", dev->name, - tx_done(dev) ? "IRQ conflict ?" : "network cable problem"); + cs89_dbg(0, err, "%s: transmit timed out, %s?\n", + dev->name, + tx_done(dev) ? "IRQ conflict" : "network cable problem"); /* Try to restart the adaptor. */ netif_wake_queue(dev); } -static netdev_tx_t net_send_packet(struct sk_buff *skb,struct net_device *dev) +static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev) { struct net_local *lp = netdev_priv(dev); unsigned long flags; - if (net_debug > 3) { - printk("%s: sent %d byte packet of type %x\n", - dev->name, skb->len, - (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]); - } + cs89_dbg(3, debug, "%s: sent %d byte packet of type %x\n", + dev->name, skb->len, + ((skb->data[ETH_ALEN + ETH_ALEN] << 8) | + skb->data[ETH_ALEN + ETH_ALEN + 1])); /* keep the upload from being interrupted, since we - ask the chip to start transmitting before the - whole packet has been completely uploaded. */ + * ask the chip to start transmitting before the + * whole packet has been completely uploaded. + */ spin_lock_irqsave(&lp->lock, flags); netif_stop_queue(dev); /* initiate a transmit sequence */ - writeword(dev->base_addr, TX_CMD_PORT, lp->send_cmd); - writeword(dev->base_addr, TX_LEN_PORT, skb->len); + iowrite16(lp->send_cmd, lp->virt_addr + TX_CMD_PORT); + iowrite16(skb->len, lp->virt_addr + TX_LEN_PORT); /* Test to see if the chip has allocated memory for the packet */ if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) { - /* - * Gasp! It hasn't. But that shouldn't happen since + /* Gasp! It hasn't. But that shouldn't happen since * we're waiting for TxOk, so return 1 and requeue this packet. */ spin_unlock_irqrestore(&lp->lock, flags); - if (net_debug) printk("cs89x0: Tx buffer not free!\n"); + cs89_dbg(0, err, "Tx buffer not free!\n"); return NETDEV_TX_BUSY; } /* Write the contents of the packet */ - writewords(dev->base_addr, TX_FRAME_PORT,skb->data,(skb->len+1) >>1); + writewords(lp, TX_FRAME_PORT, skb->data, (skb->len + 1) >> 1); spin_unlock_irqrestore(&lp->lock, flags); dev->stats.tx_bytes += skb->len; - dev_kfree_skb (skb); + dev_kfree_skb(skb); - /* - * We DO NOT call netif_wake_queue() here. + /* We DO NOT call netif_wake_queue() here. * We also DO NOT call netif_start_queue(). * * Either of these would cause another bottom half run through - * net_send_packet() before this packet has fully gone out. That causes - * us to hit the "Gasp!" above and the send is rescheduled. it runs like - * a dog. We just return and wait for the Tx completion interrupt handler - * to restart the netdevice layer + * net_send_packet() before this packet has fully gone out. + * That causes us to hit the "Gasp!" above and the send is rescheduled. + * it runs like a dog. We just return and wait for the Tx completion + * interrupt handler to restart the netdevice layer */ return NETDEV_TX_OK; } -/* The typical workload of the driver: - Handle the network interface interrupts. */ +static void set_multicast_list(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + unsigned long flags; -static irqreturn_t net_interrupt(int irq, void *dev_id) + spin_lock_irqsave(&lp->lock, flags); + if (dev->flags & IFF_PROMISC) + lp->rx_mode = RX_ALL_ACCEPT; + else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) + /* The multicast-accept list is initialized to accept-all, + * and we rely on higher-level filtering for now. + */ + lp->rx_mode = RX_MULTCAST_ACCEPT; + else + lp->rx_mode = 0; + + writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode); + + /* in promiscuous mode, we accept errored packets, + * so we have to enable interrupts on them also + */ + writereg(dev, PP_RxCFG, + (lp->curr_rx_cfg | + (lp->rx_mode == RX_ALL_ACCEPT) + ? (RX_CRC_ERROR_ENBL | RX_RUNT_ENBL | RX_EXTRA_DATA_ENBL) + : 0)); + spin_unlock_irqrestore(&lp->lock, flags); +} + +static int set_mac_address(struct net_device *dev, void *p) { - struct net_device *dev = dev_id; - struct net_local *lp; - int ioaddr, status; - int handled = 0; + int i; + struct sockaddr *addr = p; - ioaddr = dev->base_addr; - lp = netdev_priv(dev); + if (netif_running(dev)) + return -EBUSY; - /* we MUST read all the events out of the ISQ, otherwise we'll never - get interrupted again. As a consequence, we can't have any limit - on the number of times we loop in the interrupt handler. The - hardware guarantees that eventually we'll run out of events. Of - course, if you're on a slow machine, and packets are arriving - faster than you can read them off, you're screwed. Hasta la - vista, baby! */ - while ((status = readword(dev->base_addr, ISQ_PORT))) { - if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status); - handled = 1; - switch(status & ISQ_EVENT_MASK) { - case ISQ_RECEIVER_EVENT: - /* Got a packet(s). */ - net_rx(dev); - break; - case ISQ_TRANSMITTER_EVENT: - dev->stats.tx_packets++; - netif_wake_queue(dev); /* Inform upper layers. */ - if ((status & ( TX_OK | - TX_LOST_CRS | - TX_SQE_ERROR | - TX_LATE_COL | - TX_16_COL)) != TX_OK) { - if ((status & TX_OK) == 0) - dev->stats.tx_errors++; - if (status & TX_LOST_CRS) - dev->stats.tx_carrier_errors++; - if (status & TX_SQE_ERROR) - dev->stats.tx_heartbeat_errors++; - if (status & TX_LATE_COL) - dev->stats.tx_window_errors++; - if (status & TX_16_COL) - dev->stats.tx_aborted_errors++; - } - break; - case ISQ_BUFFER_EVENT: - if (status & READY_FOR_TX) { - /* we tried to transmit a packet earlier, - but inexplicably ran out of buffers. - That shouldn't happen since we only ever - load one packet. Shrug. Do the right - thing anyway. */ - netif_wake_queue(dev); /* Inform upper layers. */ - } - if (status & TX_UNDERRUN) { - if (net_debug > 0) printk("%s: transmit underrun\n", dev->name); - lp->send_underrun++; - if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381; - else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL; - /* transmit cycle is done, although - frame wasn't transmitted - this - avoids having to wait for the upper - layers to timeout on us, in the - event of a tx underrun */ - netif_wake_queue(dev); /* Inform upper layers. */ - } -#if ALLOW_DMA - if (lp->use_dma && (status & RX_DMA)) { - int count = readreg(dev, PP_DmaFrameCnt); - while(count) { - if (net_debug > 5) - printk("%s: receiving %d DMA frames\n", dev->name, count); - if (net_debug > 2 && count >1) - printk("%s: receiving %d DMA frames\n", dev->name, count); - dma_rx(dev); - if (--count == 0) - count = readreg(dev, PP_DmaFrameCnt); - if (net_debug > 2 && count > 0) - printk("%s: continuing with %d DMA frames\n", dev->name, count); - } - } -#endif - break; - case ISQ_RX_MISS_EVENT: - dev->stats.rx_missed_errors += (status >> 6); - break; - case ISQ_TX_COL_EVENT: - dev->stats.collisions += (status >> 6); - break; - } - } - return IRQ_RETVAL(handled); + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + + cs89_dbg(0, debug, "%s: Setting MAC address to %pM\n", + dev->name, dev->dev_addr); + + /* set the Ethernet address */ + for (i = 0; i < ETH_ALEN / 2; i++) + writereg(dev, PP_IA + i * 2, + (dev->dev_addr[i * 2] | + (dev->dev_addr[i * 2 + 1] << 8))); + + return 0; } -static void -count_rx_errors(int status, struct net_device *dev) +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling receive - used by netconsole and other diagnostic tools + * to allow network i/o with interrupts disabled. + */ +static void net_poll_controller(struct net_device *dev) { - dev->stats.rx_errors++; - if (status & RX_RUNT) - dev->stats.rx_length_errors++; - if (status & RX_EXTRA_DATA) - dev->stats.rx_length_errors++; - if ((status & RX_CRC_ERROR) && !(status & (RX_EXTRA_DATA|RX_RUNT))) - /* per str 172 */ - dev->stats.rx_crc_errors++; - if (status & RX_DRIBBLE) - dev->stats.rx_frame_errors++; + disable_irq(dev->irq); + net_interrupt(dev->irq, dev); + enable_irq(dev->irq); } +#endif -/* We have a good packet(s), get it/them out of the buffers. */ -static void -net_rx(struct net_device *dev) +static const struct net_device_ops net_ops = { + .ndo_open = net_open, + .ndo_stop = net_close, + .ndo_tx_timeout = net_timeout, + .ndo_start_xmit = net_send_packet, + .ndo_get_stats = net_get_stats, + .ndo_set_rx_mode = set_multicast_list, + .ndo_set_mac_address = set_mac_address, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = net_poll_controller, +#endif + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, +}; + +static void __init reset_chip(struct net_device *dev) { - struct sk_buff *skb; - int status, length; +#if !defined(CONFIG_MACH_MX31ADS) +#if !defined(CS89x0_NONISA_IRQ) + struct net_local *lp = netdev_priv(dev); +#endif /* CS89x0_NONISA_IRQ */ + int reset_start_time; - int ioaddr = dev->base_addr; - status = readword(ioaddr, RX_FRAME_PORT); - length = readword(ioaddr, RX_FRAME_PORT); + writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET); - if ((status & RX_OK) == 0) { - count_rx_errors(status, dev); - return; + /* wait 30 ms */ + msleep(30); + +#if !defined(CS89x0_NONISA_IRQ) + if (lp->chip_type != CS8900) { + /* Hardware problem requires PNP registers to be reconfigured after a reset */ + iowrite16(PP_CS8920_ISAINT, lp->virt_addr + ADD_PORT); + iowrite8(dev->irq, lp->virt_addr + DATA_PORT); + iowrite8(0, lp->virt_addr + DATA_PORT + 1); + + iowrite16(PP_CS8920_ISAMemB, lp->virt_addr + ADD_PORT); + iowrite8((dev->mem_start >> 16) & 0xff, + lp->virt_addr + DATA_PORT); + iowrite8((dev->mem_start >> 8) & 0xff, + lp->virt_addr + DATA_PORT + 1); } +#endif /* CS89x0_NONISA_IRQ */ - /* Malloc up new buffer. */ - skb = netdev_alloc_skb(dev, length + 2); - if (skb == NULL) { -#if 0 /* Again, this seems a cruel thing to do */ - printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name); + /* Wait until the chip is reset */ + reset_start_time = jiffies; + while ((readreg(dev, PP_SelfST) & INIT_DONE) == 0 && + jiffies - reset_start_time < 2) + ; +#endif /* !CONFIG_MACH_MX31ADS */ +} + +/* This is the real probe routine. + * Linux has a history of friendly device probes on the ISA bus. + * A good device probes avoids doing writes, and + * verifies that the correct device exists and functions. + * Return 0 on success. + */ +static int __init +cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular) +{ + struct net_local *lp = netdev_priv(dev); + int i; + int tmp; + unsigned rev_type = 0; + int eeprom_buff[CHKSUM_LEN]; + int retval; + + /* Initialize the device structure. */ + if (!modular) { + memset(lp, 0, sizeof(*lp)); + spin_lock_init(&lp->lock); +#ifndef MODULE +#if ALLOW_DMA + if (g_cs89x0_dma) { + lp->use_dma = 1; + lp->dma = g_cs89x0_dma; + lp->dmasize = 16; /* Could make this an option... */ + } +#endif + lp->force = g_cs89x0_media__force; #endif - dev->stats.rx_dropped++; - return; } - skb_reserve(skb, 2); /* longword align L3 header */ - readwords(ioaddr, RX_FRAME_PORT, skb_put(skb, length), length >> 1); - if (length & 1) - skb->data[length-1] = readword(ioaddr, RX_FRAME_PORT); + pr_debug("PP_addr at %p[%x]: 0x%x\n", + ioaddr, ADD_PORT, ioread16(ioaddr + ADD_PORT)); + iowrite16(PP_ChipID, ioaddr + ADD_PORT); - if (net_debug > 3) { - printk( "%s: received %d byte packet of type %x\n", - dev->name, length, - (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]); + tmp = ioread16(ioaddr + DATA_PORT); + if (tmp != CHIP_EISA_ID_SIG) { + pr_debug("%s: incorrect signature at %p[%x]: 0x%x!=" + CHIP_EISA_ID_SIG_STR "\n", + dev->name, ioaddr, DATA_PORT, tmp); + retval = -ENODEV; + goto out1; } - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += length; -} + lp->virt_addr = ioaddr; -#if ALLOW_DMA -static void release_dma_buff(struct net_local *lp) -{ - if (lp->dma_buff) { - free_pages((unsigned long)(lp->dma_buff), get_order(lp->dmasize * 1024)); - lp->dma_buff = NULL; + /* get the chip type */ + rev_type = readreg(dev, PRODUCT_ID_ADD); + lp->chip_type = rev_type & ~REVISON_BITS; + lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A'; + + /* Check the chip type and revision in order to set the correct + * send command. CS8920 revision C and CS8900 revision F can use + * the faster send. + */ + lp->send_cmd = TX_AFTER_381; + if (lp->chip_type == CS8900 && lp->chip_revision >= 'F') + lp->send_cmd = TX_NOW; + if (lp->chip_type != CS8900 && lp->chip_revision >= 'C') + lp->send_cmd = TX_NOW; + + pr_info_once("%s\n", version); + + pr_info("%s: cs89%c0%s rev %c found at %p ", + dev->name, + lp->chip_type == CS8900 ? '0' : '2', + lp->chip_type == CS8920M ? "M" : "", + lp->chip_revision, + lp->virt_addr); + + reset_chip(dev); + + /* Here we read the current configuration of the chip. + * If there is no Extended EEPROM then the idea is to not disturb + * the chip configuration, it should have been correctly setup by + * automatic EEPROM read on reset. So, if the chip says it read + * the EEPROM the driver will always do *something* instead of + * complain that adapter_cnf is 0. + */ + + if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) == + (EEPROM_OK | EEPROM_PRESENT)) { + /* Load the MAC. */ + for (i = 0; i < ETH_ALEN / 2; i++) { + unsigned int Addr; + Addr = readreg(dev, PP_IA + i * 2); + dev->dev_addr[i * 2] = Addr & 0xFF; + dev->dev_addr[i * 2 + 1] = Addr >> 8; + } + + /* Load the Adapter Configuration. + * Note: Barring any more specific information from some + * other source (ie EEPROM+Schematics), we would not know + * how to operate a 10Base2 interface on the AUI port. + * However, since we do read the status of HCB1 and use + * settings that always result in calls to control_dc_dc(dev,0) + * a BNC interface should work if the enable pin + * (dc/dc converter) is on HCB1. + * It will be called AUI however. + */ + + lp->adapter_cnf = 0; + i = readreg(dev, PP_LineCTL); + /* Preserve the setting of the HCB1 pin. */ + if ((i & (HCB1 | HCB1_ENBL)) == (HCB1 | HCB1_ENBL)) + lp->adapter_cnf |= A_CNF_DC_DC_POLARITY; + /* Save the sqelch bit */ + if ((i & LOW_RX_SQUELCH) == LOW_RX_SQUELCH) + lp->adapter_cnf |= A_CNF_EXTND_10B_2 | A_CNF_LOW_RX_SQUELCH; + /* Check if the card is in 10Base-t only mode */ + if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == 0) + lp->adapter_cnf |= A_CNF_10B_T | A_CNF_MEDIA_10B_T; + /* Check if the card is in AUI only mode */ + if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == AUI_ONLY) + lp->adapter_cnf |= A_CNF_AUI | A_CNF_MEDIA_AUI; + /* Check if the card is in Auto mode. */ + if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == AUTO_AUI_10BASET) + lp->adapter_cnf |= A_CNF_AUI | A_CNF_10B_T | + A_CNF_MEDIA_AUI | A_CNF_MEDIA_10B_T | A_CNF_MEDIA_AUTO; + + cs89_dbg(1, info, "%s: PP_LineCTL=0x%x, adapter_cnf=0x%x\n", + dev->name, i, lp->adapter_cnf); + + /* IRQ. Other chips already probe, see below. */ + if (lp->chip_type == CS8900) + lp->isa_config = readreg(dev, PP_CS8900_ISAINT) & INT_NO_MASK; + + pr_cont("[Cirrus EEPROM] "); } -} -#endif -/* The inverse routine to net_open(). */ -static int -net_close(struct net_device *dev) -{ -#if ALLOW_DMA - struct net_local *lp = netdev_priv(dev); -#endif + pr_cont("\n"); - netif_stop_queue(dev); + /* First check to see if an EEPROM is attached. */ - writereg(dev, PP_RxCFG, 0); - writereg(dev, PP_TxCFG, 0); - writereg(dev, PP_BufCFG, 0); - writereg(dev, PP_BusCTL, 0); + if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0) + pr_warn("No EEPROM, relying on command line....\n"); + else if (get_eeprom_data(dev, START_EEPROM_DATA, CHKSUM_LEN, eeprom_buff) < 0) { + pr_warn("EEPROM read failed, relying on command line\n"); + } else if (get_eeprom_cksum(START_EEPROM_DATA, CHKSUM_LEN, eeprom_buff) < 0) { + /* Check if the chip was able to read its own configuration starting + at 0 in the EEPROM*/ + if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) != + (EEPROM_OK | EEPROM_PRESENT)) + pr_warn("Extended EEPROM checksum bad and no Cirrus EEPROM, relying on command line\n"); - free_irq(dev->irq, dev); + } else { + /* This reads an extended EEPROM that is not documented + * in the CS8900 datasheet. + */ -#if ALLOW_DMA - if (lp->use_dma && lp->dma) { - free_dma(dev->dma); - release_dma_buff(lp); + /* get transmission control word but keep the autonegotiation bits */ + if (!lp->auto_neg_cnf) + lp->auto_neg_cnf = eeprom_buff[AUTO_NEG_CNF_OFFSET / 2]; + /* Store adapter configuration */ + if (!lp->adapter_cnf) + lp->adapter_cnf = eeprom_buff[ADAPTER_CNF_OFFSET / 2]; + /* Store ISA configuration */ + lp->isa_config = eeprom_buff[ISA_CNF_OFFSET / 2]; + dev->mem_start = eeprom_buff[PACKET_PAGE_OFFSET / 2] << 8; + + /* eeprom_buff has 32-bit ints, so we can't just memcpy it */ + /* store the initial memory base address */ + for (i = 0; i < ETH_ALEN / 2; i++) { + dev->dev_addr[i * 2] = eeprom_buff[i]; + dev->dev_addr[i * 2 + 1] = eeprom_buff[i] >> 8; + } + cs89_dbg(1, debug, "%s: new adapter_cnf: 0x%x\n", + dev->name, lp->adapter_cnf); + } + + /* allow them to force multiple transceivers. If they force multiple, autosense */ + { + int count = 0; + if (lp->force & FORCE_RJ45) { + lp->adapter_cnf |= A_CNF_10B_T; + count++; + } + if (lp->force & FORCE_AUI) { + lp->adapter_cnf |= A_CNF_AUI; + count++; + } + if (lp->force & FORCE_BNC) { + lp->adapter_cnf |= A_CNF_10B_2; + count++; + } + if (count > 1) + lp->adapter_cnf |= A_CNF_MEDIA_AUTO; + else if (lp->force & FORCE_RJ45) + lp->adapter_cnf |= A_CNF_MEDIA_10B_T; + else if (lp->force & FORCE_AUI) + lp->adapter_cnf |= A_CNF_MEDIA_AUI; + else if (lp->force & FORCE_BNC) + lp->adapter_cnf |= A_CNF_MEDIA_10B_2; + } + + cs89_dbg(1, debug, "%s: after force 0x%x, adapter_cnf=0x%x\n", + dev->name, lp->force, lp->adapter_cnf); + + /* FIXME: We don't let you set dc-dc polarity or low RX squelch from the command line: add it here */ + + /* FIXME: We don't let you set the IMM bit from the command line: add it to lp->auto_neg_cnf here */ + + /* FIXME: we don't set the Ethernet address on the command line. Use + * ifconfig IFACE hw ether AABBCCDDEEFF + */ + + pr_info("media %s%s%s", + (lp->adapter_cnf & A_CNF_10B_T) ? "RJ-45," : "", + (lp->adapter_cnf & A_CNF_AUI) ? "AUI," : "", + (lp->adapter_cnf & A_CNF_10B_2) ? "BNC," : ""); + + lp->irq_map = 0xffff; + + /* If this is a CS8900 then no pnp soft */ + if (lp->chip_type != CS8900 && + /* Check if the ISA IRQ has been set */ + (i = readreg(dev, PP_CS8920_ISAINT) & 0xff, + (i != 0 && i < CS8920_NO_INTS))) { + if (!dev->irq) + dev->irq = i; + } else { + i = lp->isa_config & INT_NO_MASK; +#ifndef CONFIG_CS89x0_PLATFORM + if (lp->chip_type == CS8900) { +#ifdef CS89x0_NONISA_IRQ + i = cs8900_irq_map[0]; +#else + /* Translate the IRQ using the IRQ mapping table. */ + if (i >= ARRAY_SIZE(cs8900_irq_map)) + pr_err("invalid ISA interrupt number %d\n", i); + else + i = cs8900_irq_map[i]; + + lp->irq_map = CS8900_IRQ_MAP; /* fixed IRQ map for CS8900 */ + } else { + int irq_map_buff[IRQ_MAP_LEN/2]; + + if (get_eeprom_data(dev, IRQ_MAP_EEPROM_DATA, + IRQ_MAP_LEN / 2, + irq_map_buff) >= 0) { + if ((irq_map_buff[0] & 0xff) == PNP_IRQ_FRMT) + lp->irq_map = ((irq_map_buff[0] >> 8) | + (irq_map_buff[1] << 8)); + } +#endif + } +#endif + if (!dev->irq) + dev->irq = i; } + + pr_cont(" IRQ %d", dev->irq); + +#if ALLOW_DMA + if (lp->use_dma) { + get_dma_channel(dev); + pr_cont(", DMA %d", dev->dma); + } else #endif + pr_cont(", programmed I/O"); - /* Update the statistics here. */ - return 0; -} + /* print the ethernet address. */ + pr_cont(", MAC %pM\n", dev->dev_addr); -/* Get the current statistics. This may be called with the card open or - closed. */ -static struct net_device_stats * -net_get_stats(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - unsigned long flags; + dev->netdev_ops = &net_ops; + dev->watchdog_timeo = HZ; - spin_lock_irqsave(&lp->lock, flags); - /* Update the statistics from the device registers. */ - dev->stats.rx_missed_errors += (readreg(dev, PP_RxMiss) >> 6); - dev->stats.collisions += (readreg(dev, PP_TxCol) >> 6); - spin_unlock_irqrestore(&lp->lock, flags); + cs89_dbg(0, info, "cs89x0_probe1() successful\n"); - return &dev->stats; + retval = register_netdev(dev); + if (retval) + goto out2; + return 0; +out2: + iowrite16(PP_ChipID, lp->virt_addr + ADD_PORT); +out1: + return retval; } -static void set_multicast_list(struct net_device *dev) +#ifndef CONFIG_CS89x0_PLATFORM +/* + * This function converts the I/O port addres used by the cs89x0_probe() and + * init_module() functions to the I/O memory address used by the + * cs89x0_probe1() function. + */ +static int __init +cs89x0_ioport_probe(struct net_device *dev, unsigned long ioport, int modular) { struct net_local *lp = netdev_priv(dev); - unsigned long flags; + int ret; + void __iomem *io_mem; - spin_lock_irqsave(&lp->lock, flags); - if(dev->flags&IFF_PROMISC) - { - lp->rx_mode = RX_ALL_ACCEPT; + if (!lp) + return -ENOMEM; + + dev->base_addr = ioport; + + if (!request_region(ioport, NETCARD_IO_EXTENT, DRV_NAME)) { + ret = -EBUSY; + goto out; } - else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) - { - /* The multicast-accept list is initialized to accept-all, and we - rely on higher-level filtering for now. */ - lp->rx_mode = RX_MULTCAST_ACCEPT; + + io_mem = ioport_map(ioport & ~3, NETCARD_IO_EXTENT); + if (!io_mem) { + ret = -ENOMEM; + goto release; } - else - lp->rx_mode = 0; - writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode); + /* if they give us an odd I/O address, then do ONE write to + * the address port, to get it back to address zero, where we + * expect to find the EISA signature word. An IO with a base of 0x3 + * will skip the test for the ADD_PORT. + */ + if (ioport & 1) { + cs89_dbg(1, info, "%s: odd ioaddr 0x%lx\n", dev->name, ioport); + if ((ioport & 2) != 2) { + if ((ioread16(io_mem + ADD_PORT) & ADD_MASK) != + ADD_SIG) { + pr_err("%s: bad signature 0x%x\n", + dev->name, ioread16(io_mem + ADD_PORT)); + ret = -ENODEV; + goto unmap; + } + } + } - /* in promiscuous mode, we accept errored packets, so we have to enable interrupts on them also */ - writereg(dev, PP_RxCFG, lp->curr_rx_cfg | - (lp->rx_mode == RX_ALL_ACCEPT? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0)); - spin_unlock_irqrestore(&lp->lock, flags); + ret = cs89x0_probe1(dev, io_mem, modular); + if (!ret) + goto out; +unmap: + ioport_unmap(io_mem); +release: + release_region(ioport, NETCARD_IO_EXTENT); +out: + return ret; } +#ifndef MODULE +/* Check for a network adaptor of this type, and return '0' iff one exists. + * If dev->base_addr == 0, probe all likely locations. + * If dev->base_addr == 1, always return failure. + * If dev->base_addr == 2, allocate space for the device and return success + * (detachable devices only). + * Return 0 on success. + */ -static int set_mac_address(struct net_device *dev, void *p) +struct net_device * __init cs89x0_probe(int unit) { - int i; - struct sockaddr *addr = p; - - if (netif_running(dev)) - return -EBUSY; + struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); + unsigned *port; + int err = 0; + int irq; + int io; - memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + if (!dev) + return ERR_PTR(-ENODEV); - if (net_debug) - printk("%s: Setting MAC address to %pM.\n", - dev->name, dev->dev_addr); + sprintf(dev->name, "eth%d", unit); + netdev_boot_setup_check(dev); + io = dev->base_addr; + irq = dev->irq; - /* set the Ethernet address */ - for (i=0; i < ETH_ALEN/2; i++) - writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8)); + cs89_dbg(0, info, "cs89x0_probe(0x%x)\n", io); - return 0; + if (io > 0x1ff) { /* Check a single specified location. */ + err = cs89x0_ioport_probe(dev, io, 0); + } else if (io != 0) { /* Don't probe at all. */ + err = -ENXIO; + } else { + for (port = netcard_portlist; *port; port++) { + if (cs89x0_ioport_probe(dev, *port, 0) == 0) + break; + dev->irq = irq; + } + if (!*port) + err = -ENODEV; + } + if (err) + goto out; + return dev; +out: + free_netdev(dev); + pr_warn("no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP\n"); + return ERR_PTR(err); } +#endif +#endif #if defined(MODULE) && !defined(CONFIG_CS89x0_PLATFORM) static struct net_device *dev_cs89x0; -/* - * Support the 'debug' module parm even if we're compiled for non-debug to +/* Support the 'debug' module parm even if we're compiled for non-debug to * avoid breaking someone's startup scripts */ @@ -1764,11 +1755,11 @@ static int io; static int irq; static int debug; static char media[8]; -static int duplex=-1; +static int duplex = -1; static int use_dma; /* These generate unused var warnings if ALLOW_DMA = 0 */ static int dma; -static int dmasize=16; /* or 64 */ +static int dmasize = 16; /* or 64 */ module_param(io, int, 0); module_param(irq, int, 0); @@ -1801,32 +1792,28 @@ MODULE_PARM_DESC(use_dma , "(ignored)"); MODULE_AUTHOR("Mike Cruse, Russwll Nelson <nelson@crynwr.com>, Andrew Morton"); MODULE_LICENSE("GPL"); - /* -* media=t - specify media type - or media=2 - or media=aui - or medai=auto -* duplex=0 - specify forced half/full/autonegotiate duplex -* debug=# - debug level - - -* Default Chip Configuration: - * DMA Burst = enabled - * IOCHRDY Enabled = enabled - * UseSA = enabled - * CS8900 defaults to half-duplex if not specified on command-line - * CS8920 defaults to autoneg if not specified on command-line - * Use reset defaults for other config parameters - -* Assumptions: - * media type specified is supported (circuitry is present) - * if memory address is > 1MB, then required mem decode hw is present - * if 10B-2, then agent other than driver will enable DC/DC converter - (hw or software util) - - -*/ + * media=t - specify media type + * or media=2 + * or media=aui + * or medai=auto + * duplex=0 - specify forced half/full/autonegotiate duplex + * debug=# - debug level + * + * Default Chip Configuration: + * DMA Burst = enabled + * IOCHRDY Enabled = enabled + * UseSA = enabled + * CS8900 defaults to half-duplex if not specified on command-line + * CS8920 defaults to autoneg if not specified on command-line + * Use reset defaults for other config parameters + * + * Assumptions: + * media type specified is supported (circuitry is present) + * if memory address is > 1MB, then required mem decode hw is present + * if 10B-2, then agent other than driver will enable DC/DC converter + * (hw or software util) + */ int __init init_module(void) { @@ -1856,8 +1843,8 @@ int __init init_module(void) spin_lock_init(&lp->lock); - /* boy, they'd better get these right */ - if (!strcmp(media, "rj45")) + /* boy, they'd better get these right */ + if (!strcmp(media, "rj45")) lp->adapter_cnf = A_CNF_MEDIA_10B_T | A_CNF_10B_T; else if (!strcmp(media, "aui")) lp->adapter_cnf = A_CNF_MEDIA_AUI | A_CNF_AUI; @@ -1866,27 +1853,28 @@ int __init init_module(void) else lp->adapter_cnf = A_CNF_MEDIA_10B_T | A_CNF_10B_T; - if (duplex==-1) + if (duplex == -1) lp->auto_neg_cnf = AUTO_NEG_ENABLE; - if (io == 0) { - printk(KERN_ERR "cs89x0.c: Module autoprobing not allowed.\n"); - printk(KERN_ERR "cs89x0.c: Append io=0xNNN\n"); - ret = -EPERM; + if (io == 0) { + pr_err("Module autoprobing not allowed\n"); + pr_err("Append io=0xNNN\n"); + ret = -EPERM; goto out; - } else if (io <= 0x1ff) { + } else if (io <= 0x1ff) { ret = -ENXIO; goto out; } #if ALLOW_DMA if (use_dma && dmasize != 16 && dmasize != 64) { - printk(KERN_ERR "cs89x0.c: dma size must be either 16K or 64K, not %dK\n", dmasize); + pr_err("dma size must be either 16K or 64K, not %dK\n", + dmasize); ret = -EPERM; goto out; } #endif - ret = cs89x0_probe1(dev, io, 1); + ret = cs89x0_ioport_probe(dev, io, 1); if (ret) goto out; @@ -1900,8 +1888,11 @@ out: void __exit cleanup_module(void) { + struct net_local *lp = netdev_priv(dev_cs89x0); + unregister_netdev(dev_cs89x0); - writeword(dev_cs89x0->base_addr, ADD_PORT, PP_ChipID); + iowrite16(PP_ChipID, lp->virt_addr + ADD_PORT); + ioport_unmap(lp->virt_addr); release_region(dev_cs89x0->base_addr, NETCARD_IO_EXTENT); free_netdev(dev_cs89x0); } @@ -1913,6 +1904,7 @@ static int __init cs89x0_platform_probe(struct platform_device *pdev) struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); struct net_local *lp; struct resource *mem_res; + void __iomem *virt_addr; int err; if (!dev) @@ -1923,29 +1915,28 @@ static int __init cs89x0_platform_probe(struct platform_device *pdev) mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); dev->irq = platform_get_irq(pdev, 0); if (mem_res == NULL || dev->irq <= 0) { - dev_warn(&dev->dev, "memory/interrupt resource missing.\n"); + dev_warn(&dev->dev, "memory/interrupt resource missing\n"); err = -ENXIO; goto free; } - lp->phys_addr = mem_res->start; lp->size = resource_size(mem_res); - if (!request_mem_region(lp->phys_addr, lp->size, DRV_NAME)) { - dev_warn(&dev->dev, "request_mem_region() failed.\n"); + if (!request_mem_region(mem_res->start, lp->size, DRV_NAME)) { + dev_warn(&dev->dev, "request_mem_region() failed\n"); err = -EBUSY; goto free; } - lp->virt_addr = ioremap(lp->phys_addr, lp->size); - if (!lp->virt_addr) { - dev_warn(&dev->dev, "ioremap() failed.\n"); + virt_addr = ioremap(mem_res->start, lp->size); + if (!virt_addr) { + dev_warn(&dev->dev, "ioremap() failed\n"); err = -ENOMEM; goto release; } - err = cs89x0_probe1(dev, (unsigned long)lp->virt_addr, 0); + err = cs89x0_probe1(dev, virt_addr, 0); if (err) { - dev_warn(&dev->dev, "no cs8900 or cs8920 detected.\n"); + dev_warn(&dev->dev, "no cs8900 or cs8920 detected\n"); goto unmap; } @@ -1953,9 +1944,9 @@ static int __init cs89x0_platform_probe(struct platform_device *pdev) return 0; unmap: - iounmap(lp->virt_addr); + iounmap(virt_addr); release: - release_mem_region(lp->phys_addr, lp->size); + release_mem_region(mem_res->start, lp->size); free: free_netdev(dev); return err; @@ -1965,10 +1956,16 @@ static int cs89x0_platform_remove(struct platform_device *pdev) { struct net_device *dev = platform_get_drvdata(pdev); struct net_local *lp = netdev_priv(dev); + struct resource *mem_res; + /* This platform_get_resource() call will not return NULL, because + * the same call in cs89x0_platform_probe() has returned a non NULL + * value. + */ + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); unregister_netdev(dev); iounmap(lp->virt_addr); - release_mem_region(lp->phys_addr, lp->size); + release_mem_region(mem_res->start, lp->size); free_netdev(dev); return 0; } @@ -1996,13 +1993,3 @@ static void __exit cs89x0_cleanup(void) module_exit(cs89x0_cleanup); #endif /* CONFIG_CS89x0_PLATFORM */ - -/* - * Local variables: - * version-control: t - * kept-new-versions: 5 - * c-indent-level: 8 - * tab-width: 8 - * End: - * - */ |