diff options
Diffstat (limited to 'drivers/mtd/tests/mtd_subpagetest.c')
| -rw-r--r-- | drivers/mtd/tests/mtd_subpagetest.c | 124 | 
1 files changed, 62 insertions, 62 deletions
diff --git a/drivers/mtd/tests/mtd_subpagetest.c b/drivers/mtd/tests/mtd_subpagetest.c index 9667bf53528..c880c2229c5 100644 --- a/drivers/mtd/tests/mtd_subpagetest.c +++ b/drivers/mtd/tests/mtd_subpagetest.c @@ -19,6 +19,8 @@   *   */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +  #include <linux/init.h>  #include <linux/module.h>  #include <linux/moduleparam.h> @@ -27,8 +29,6 @@  #include <linux/slab.h>  #include <linux/sched.h> -#define PRINT_PREF KERN_INFO "mtd_subpagetest: " -  static int dev = -EINVAL;  module_param(dev, int, S_IRUGO);  MODULE_PARM_DESC(dev, "MTD device number to use"); @@ -82,12 +82,12 @@ static int erase_eraseblock(int ebnum)  	err = mtd_erase(mtd, &ei);  	if (err) { -		printk(PRINT_PREF "error %d while erasing EB %d\n", err, ebnum); +		pr_err("error %d while erasing EB %d\n", err, ebnum);  		return err;  	}  	if (ei.state == MTD_ERASE_FAILED) { -		printk(PRINT_PREF "some erase error occurred at EB %d\n", +		pr_err("some erase error occurred at EB %d\n",  		       ebnum);  		return -EIO;  	} @@ -100,7 +100,7 @@ static int erase_whole_device(void)  	int err;  	unsigned int i; -	printk(PRINT_PREF "erasing whole device\n"); +	pr_info("erasing whole device\n");  	for (i = 0; i < ebcnt; ++i) {  		if (bbt[i])  			continue; @@ -109,7 +109,7 @@ static int erase_whole_device(void)  			return err;  		cond_resched();  	} -	printk(PRINT_PREF "erased %u eraseblocks\n", i); +	pr_info("erased %u eraseblocks\n", i);  	return 0;  } @@ -122,11 +122,11 @@ static int write_eraseblock(int ebnum)  	set_random_data(writebuf, subpgsize);  	err = mtd_write(mtd, addr, subpgsize, &written, writebuf);  	if (unlikely(err || written != subpgsize)) { -		printk(PRINT_PREF "error: write failed at %#llx\n", +		pr_err("error: write failed at %#llx\n",  		       (long long)addr);  		if (written != subpgsize) { -			printk(PRINT_PREF "  write size: %#x\n", subpgsize); -			printk(PRINT_PREF "  written: %#zx\n", written); +			pr_err("  write size: %#x\n", subpgsize); +			pr_err("  written: %#zx\n", written);  		}  		return err ? err : -1;  	} @@ -136,11 +136,11 @@ static int write_eraseblock(int ebnum)  	set_random_data(writebuf, subpgsize);  	err = mtd_write(mtd, addr, subpgsize, &written, writebuf);  	if (unlikely(err || written != subpgsize)) { -		printk(PRINT_PREF "error: write failed at %#llx\n", +		pr_err("error: write failed at %#llx\n",  		       (long long)addr);  		if (written != subpgsize) { -			printk(PRINT_PREF "  write size: %#x\n", subpgsize); -			printk(PRINT_PREF "  written: %#zx\n", written); +			pr_err("  write size: %#x\n", subpgsize); +			pr_err("  written: %#zx\n", written);  		}  		return err ? err : -1;  	} @@ -160,12 +160,12 @@ static int write_eraseblock2(int ebnum)  		set_random_data(writebuf, subpgsize * k);  		err = mtd_write(mtd, addr, subpgsize * k, &written, writebuf);  		if (unlikely(err || written != subpgsize * k)) { -			printk(PRINT_PREF "error: write failed at %#llx\n", +			pr_err("error: write failed at %#llx\n",  			       (long long)addr);  			if (written != subpgsize) { -				printk(PRINT_PREF "  write size: %#x\n", +				pr_err("  write size: %#x\n",  				       subpgsize * k); -				printk(PRINT_PREF "  written: %#08zx\n", +				pr_err("  written: %#08zx\n",  				       written);  			}  			return err ? err : -1; @@ -198,23 +198,23 @@ static int verify_eraseblock(int ebnum)  	err = mtd_read(mtd, addr, subpgsize, &read, readbuf);  	if (unlikely(err || read != subpgsize)) {  		if (mtd_is_bitflip(err) && read == subpgsize) { -			printk(PRINT_PREF "ECC correction at %#llx\n", +			pr_info("ECC correction at %#llx\n",  			       (long long)addr);  			err = 0;  		} else { -			printk(PRINT_PREF "error: read failed at %#llx\n", +			pr_err("error: read failed at %#llx\n",  			       (long long)addr);  			return err ? err : -1;  		}  	}  	if (unlikely(memcmp(readbuf, writebuf, subpgsize))) { -		printk(PRINT_PREF "error: verify failed at %#llx\n", +		pr_err("error: verify failed at %#llx\n",  		       (long long)addr); -		printk(PRINT_PREF "------------- written----------------\n"); +		pr_info("------------- written----------------\n");  		print_subpage(writebuf); -		printk(PRINT_PREF "------------- read ------------------\n"); +		pr_info("------------- read ------------------\n");  		print_subpage(readbuf); -		printk(PRINT_PREF "-------------------------------------\n"); +		pr_info("-------------------------------------\n");  		errcnt += 1;  	} @@ -225,23 +225,23 @@ static int verify_eraseblock(int ebnum)  	err = mtd_read(mtd, addr, subpgsize, &read, readbuf);  	if (unlikely(err || read != subpgsize)) {  		if (mtd_is_bitflip(err) && read == subpgsize) { -			printk(PRINT_PREF "ECC correction at %#llx\n", +			pr_info("ECC correction at %#llx\n",  			       (long long)addr);  			err = 0;  		} else { -			printk(PRINT_PREF "error: read failed at %#llx\n", +			pr_err("error: read failed at %#llx\n",  			       (long long)addr);  			return err ? err : -1;  		}  	}  	if (unlikely(memcmp(readbuf, writebuf, subpgsize))) { -		printk(PRINT_PREF "error: verify failed at %#llx\n", +		pr_info("error: verify failed at %#llx\n",  		       (long long)addr); -		printk(PRINT_PREF "------------- written----------------\n"); +		pr_info("------------- written----------------\n");  		print_subpage(writebuf); -		printk(PRINT_PREF "------------- read ------------------\n"); +		pr_info("------------- read ------------------\n");  		print_subpage(readbuf); -		printk(PRINT_PREF "-------------------------------------\n"); +		pr_info("-------------------------------------\n");  		errcnt += 1;  	} @@ -262,17 +262,17 @@ static int verify_eraseblock2(int ebnum)  		err = mtd_read(mtd, addr, subpgsize * k, &read, readbuf);  		if (unlikely(err || read != subpgsize * k)) {  			if (mtd_is_bitflip(err) && read == subpgsize * k) { -				printk(PRINT_PREF "ECC correction at %#llx\n", +				pr_info("ECC correction at %#llx\n",  				       (long long)addr);  				err = 0;  			} else { -				printk(PRINT_PREF "error: read failed at " +				pr_err("error: read failed at "  				       "%#llx\n", (long long)addr);  				return err ? err : -1;  			}  		}  		if (unlikely(memcmp(readbuf, writebuf, subpgsize * k))) { -			printk(PRINT_PREF "error: verify failed at %#llx\n", +			pr_err("error: verify failed at %#llx\n",  			       (long long)addr);  			errcnt += 1;  		} @@ -295,17 +295,17 @@ static int verify_eraseblock_ff(int ebnum)  		err = mtd_read(mtd, addr, subpgsize, &read, readbuf);  		if (unlikely(err || read != subpgsize)) {  			if (mtd_is_bitflip(err) && read == subpgsize) { -				printk(PRINT_PREF "ECC correction at %#llx\n", +				pr_info("ECC correction at %#llx\n",  				       (long long)addr);  				err = 0;  			} else { -				printk(PRINT_PREF "error: read failed at " +				pr_err("error: read failed at "  				       "%#llx\n", (long long)addr);  				return err ? err : -1;  			}  		}  		if (unlikely(memcmp(readbuf, writebuf, subpgsize))) { -			printk(PRINT_PREF "error: verify 0xff failed at " +			pr_err("error: verify 0xff failed at "  			       "%#llx\n", (long long)addr);  			errcnt += 1;  		} @@ -320,7 +320,7 @@ static int verify_all_eraseblocks_ff(void)  	int err;  	unsigned int i; -	printk(PRINT_PREF "verifying all eraseblocks for 0xff\n"); +	pr_info("verifying all eraseblocks for 0xff\n");  	for (i = 0; i < ebcnt; ++i) {  		if (bbt[i])  			continue; @@ -328,10 +328,10 @@ static int verify_all_eraseblocks_ff(void)  		if (err)  			return err;  		if (i % 256 == 0) -			printk(PRINT_PREF "verified up to eraseblock %u\n", i); +			pr_info("verified up to eraseblock %u\n", i);  		cond_resched();  	} -	printk(PRINT_PREF "verified %u eraseblocks\n", i); +	pr_info("verified %u eraseblocks\n", i);  	return 0;  } @@ -342,7 +342,7 @@ static int is_block_bad(int ebnum)  	ret = mtd_block_isbad(mtd, addr);  	if (ret) -		printk(PRINT_PREF "block %d is bad\n", ebnum); +		pr_info("block %d is bad\n", ebnum);  	return ret;  } @@ -352,18 +352,18 @@ static int scan_for_bad_eraseblocks(void)  	bbt = kzalloc(ebcnt, GFP_KERNEL);  	if (!bbt) { -		printk(PRINT_PREF "error: cannot allocate memory\n"); +		pr_err("error: cannot allocate memory\n");  		return -ENOMEM;  	} -	printk(PRINT_PREF "scanning for bad eraseblocks\n"); +	pr_info("scanning for bad eraseblocks\n");  	for (i = 0; i < ebcnt; ++i) {  		bbt[i] = is_block_bad(i) ? 1 : 0;  		if (bbt[i])  			bad += 1;  		cond_resched();  	} -	printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad); +	pr_info("scanned %d eraseblocks, %d are bad\n", i, bad);  	return 0;  } @@ -377,22 +377,22 @@ static int __init mtd_subpagetest_init(void)  	printk(KERN_INFO "=================================================\n");  	if (dev < 0) { -		printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n"); -		printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n"); +		pr_info("Please specify a valid mtd-device via module parameter\n"); +		pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");  		return -EINVAL;  	} -	printk(PRINT_PREF "MTD device: %d\n", dev); +	pr_info("MTD device: %d\n", dev);  	mtd = get_mtd_device(NULL, dev);  	if (IS_ERR(mtd)) {  		err = PTR_ERR(mtd); -		printk(PRINT_PREF "error: cannot get MTD device\n"); +		pr_err("error: cannot get MTD device\n");  		return err;  	}  	if (mtd->type != MTD_NANDFLASH) { -		printk(PRINT_PREF "this test requires NAND flash\n"); +		pr_info("this test requires NAND flash\n");  		goto out;  	} @@ -402,7 +402,7 @@ static int __init mtd_subpagetest_init(void)  	ebcnt = tmp;  	pgcnt = mtd->erasesize / mtd->writesize; -	printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, " +	pr_info("MTD device size %llu, eraseblock size %u, "  	       "page size %u, subpage size %u, count of eraseblocks %u, "  	       "pages per eraseblock %u, OOB size %u\n",  	       (unsigned long long)mtd->size, mtd->erasesize, @@ -412,12 +412,12 @@ static int __init mtd_subpagetest_init(void)  	bufsize = subpgsize * 32;  	writebuf = kmalloc(bufsize, GFP_KERNEL);  	if (!writebuf) { -		printk(PRINT_PREF "error: cannot allocate memory\n"); +		pr_info("error: cannot allocate memory\n");  		goto out;  	}  	readbuf = kmalloc(bufsize, GFP_KERNEL);  	if (!readbuf) { -		printk(PRINT_PREF "error: cannot allocate memory\n"); +		pr_info("error: cannot allocate memory\n");  		goto out;  	} @@ -429,7 +429,7 @@ static int __init mtd_subpagetest_init(void)  	if (err)  		goto out; -	printk(PRINT_PREF "writing whole device\n"); +	pr_info("writing whole device\n");  	simple_srand(1);  	for (i = 0; i < ebcnt; ++i) {  		if (bbt[i]) @@ -438,13 +438,13 @@ static int __init mtd_subpagetest_init(void)  		if (unlikely(err))  			goto out;  		if (i % 256 == 0) -			printk(PRINT_PREF "written up to eraseblock %u\n", i); +			pr_info("written up to eraseblock %u\n", i);  		cond_resched();  	} -	printk(PRINT_PREF "written %u eraseblocks\n", i); +	pr_info("written %u eraseblocks\n", i);  	simple_srand(1); -	printk(PRINT_PREF "verifying all eraseblocks\n"); +	pr_info("verifying all eraseblocks\n");  	for (i = 0; i < ebcnt; ++i) {  		if (bbt[i])  			continue; @@ -452,10 +452,10 @@ static int __init mtd_subpagetest_init(void)  		if (unlikely(err))  			goto out;  		if (i % 256 == 0) -			printk(PRINT_PREF "verified up to eraseblock %u\n", i); +			pr_info("verified up to eraseblock %u\n", i);  		cond_resched();  	} -	printk(PRINT_PREF "verified %u eraseblocks\n", i); +	pr_info("verified %u eraseblocks\n", i);  	err = erase_whole_device();  	if (err) @@ -467,7 +467,7 @@ static int __init mtd_subpagetest_init(void)  	/* Write all eraseblocks */  	simple_srand(3); -	printk(PRINT_PREF "writing whole device\n"); +	pr_info("writing whole device\n");  	for (i = 0; i < ebcnt; ++i) {  		if (bbt[i])  			continue; @@ -475,14 +475,14 @@ static int __init mtd_subpagetest_init(void)  		if (unlikely(err))  			goto out;  		if (i % 256 == 0) -			printk(PRINT_PREF "written up to eraseblock %u\n", i); +			pr_info("written up to eraseblock %u\n", i);  		cond_resched();  	} -	printk(PRINT_PREF "written %u eraseblocks\n", i); +	pr_info("written %u eraseblocks\n", i);  	/* Check all eraseblocks */  	simple_srand(3); -	printk(PRINT_PREF "verifying all eraseblocks\n"); +	pr_info("verifying all eraseblocks\n");  	for (i = 0; i < ebcnt; ++i) {  		if (bbt[i])  			continue; @@ -490,10 +490,10 @@ static int __init mtd_subpagetest_init(void)  		if (unlikely(err))  			goto out;  		if (i % 256 == 0) -			printk(PRINT_PREF "verified up to eraseblock %u\n", i); +			pr_info("verified up to eraseblock %u\n", i);  		cond_resched();  	} -	printk(PRINT_PREF "verified %u eraseblocks\n", i); +	pr_info("verified %u eraseblocks\n", i);  	err = erase_whole_device();  	if (err) @@ -503,7 +503,7 @@ static int __init mtd_subpagetest_init(void)  	if (err)  		goto out; -	printk(PRINT_PREF "finished with %d errors\n", errcnt); +	pr_info("finished with %d errors\n", errcnt);  out:  	kfree(bbt); @@ -511,7 +511,7 @@ out:  	kfree(writebuf);  	put_mtd_device(mtd);  	if (err) -		printk(PRINT_PREF "error %d occurred\n", err); +		pr_info("error %d occurred\n", err);  	printk(KERN_INFO "=================================================\n");  	return err;  }  |