5 files changed, 17 insertions, 15 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 432ae8358c8..e04b751680d 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -329,7 +329,7 @@ config MMC_SDRICOH_CS
 
 config MMC_TMIO
 	tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
-	depends on MFD_TMIO || MFD_ASIC3
+	depends on MFD_TMIO || MFD_ASIC3 || SUPERH
 	help
 	  This provides support for the SD/MMC cell found in TC6393XB,
 	  T7L66XB and also HTC ASIC3
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 705a5894a6b..90d168ad03b 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -56,7 +56,7 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
 				clk = 255;
 			host->cclk = host->mclk / (2 * (clk + 1));
 		}
-		if (host->hw_designer == 0x80)
+		if (host->hw_designer == AMBA_VENDOR_ST)
 			clk |= MCI_FCEN; /* Bug fix in ST IP block */
 		clk |= MCI_CLK_ENABLE;
 		/* This hasn't proven to be worthwhile */
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index b8fd7af1cee..5f970e253e5 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -30,12 +30,12 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <mach/board.h>
-#include <mach/mmc.h>
+#include <plat/board.h>
+#include <plat/mmc.h>
 #include <mach/gpio.h>
-#include <mach/dma.h>
-#include <mach/mux.h>
-#include <mach/fpga.h>
+#include <plat/dma.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
 
 #define	OMAP_MMC_REG_CMD	0x00
 #define	OMAP_MMC_REG_ARGL	0x04
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 0aecaaebef3..4b232251890 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -30,11 +30,11 @@
 #include <linux/mmc/core.h>
 #include <linux/io.h>
 #include <linux/semaphore.h>
-#include <mach/dma.h>
+#include <plat/dma.h>
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/mmc.h>
-#include <mach/cpu.h>
+#include <plat/board.h>
+#include <plat/mmc.h>
+#include <plat/cpu.h>
 
 /* OMAP HSMMC Host Controller Registers */
 #define OMAP_HSMMC_SYSCONFIG	0x0010
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 9fb480bb0e0..bb47ff465c0 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -43,6 +43,9 @@
 #define NR_SG	1
 #define CLKRT_OFF	(~0)
 
+#define mmc_has_26MHz()		(cpu_is_pxa300() || cpu_is_pxa310() \
+				|| cpu_is_pxa935())
+
 struct pxamci_host {
 	struct mmc_host		*mmc;
 	spinlock_t		lock;
@@ -457,7 +460,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 			clk_enable(host->clk);
 
 		if (ios->clock == 26000000) {
-			/* to support 26MHz on pxa300/pxa310 */
+			/* to support 26MHz */
 			host->clkrt = 7;
 		} else {
 			/* to handle (19.5MHz, 26MHz) */
@@ -608,8 +611,7 @@ static int pxamci_probe(struct platform_device *pdev)
 	 * Calculate minimum clock rate, rounding up.
 	 */
 	mmc->f_min = (host->clkrate + 63) / 64;
-	mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000
-							  : host->clkrate;
+	mmc->f_max = (mmc_has_26MHz()) ? 26000000 : host->clkrate;
 
 	pxamci_init_ocr(host);
 
@@ -618,7 +620,7 @@ static int pxamci_probe(struct platform_device *pdev)
 	if (!cpu_is_pxa25x()) {
 		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
 		host->cmdat |= CMDAT_SDIO_INT_EN;
-		if (cpu_is_pxa300() || cpu_is_pxa310())
+		if (mmc_has_26MHz())
 			mmc->caps |= MMC_CAP_MMC_HIGHSPEED |
 				     MMC_CAP_SD_HIGHSPEED;
 	}