diff options
Diffstat (limited to 'drivers/hwmon/w83781d.c')
| -rw-r--r-- | drivers/hwmon/w83781d.c | 36 |
1 files changed, 19 insertions, 17 deletions
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index aeec5b1d81c..f9d513949a3 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -64,8 +64,8 @@ enum chips { w83781d, w83782d, w83783s, as99127f }; /* Insmod parameters */ static unsigned short force_subclients[4]; module_param_array(force_subclients, short, NULL, 0); -MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " - "{bus, clientaddr, subclientaddr1, subclientaddr2}"); +MODULE_PARM_DESC(force_subclients, + "List of subclient addresses: {bus, clientaddr, subclientaddr1, subclientaddr2}"); static bool reset; module_param(reset, bool, 0); @@ -826,8 +826,9 @@ store_sensor(struct device *dev, struct device_attribute *da, data->sens[nr] = val; break; case W83781D_DEFAULT_BETA: - dev_warn(dev, "Sensor type %d is deprecated, please use 4 " - "instead\n", W83781D_DEFAULT_BETA); + dev_warn(dev, + "Sensor type %d is deprecated, please use 4 instead\n", + W83781D_DEFAULT_BETA); /* fall through */ case 4: /* thermistor */ tmp = w83781d_read_value(data, W83781D_REG_SCFG1); @@ -874,8 +875,8 @@ w83781d_detect_subclients(struct i2c_client *new_client) for (i = 2; i <= 3; i++) { if (force_subclients[i] < 0x48 || force_subclients[i] > 0x4f) { - dev_err(&new_client->dev, "Invalid subclient " - "address %d; must be 0x48-0x4f\n", + dev_err(&new_client->dev, + "Invalid subclient address %d; must be 0x48-0x4f\n", force_subclients[i]); err = -EINVAL; goto ERROR_SC_1; @@ -910,9 +911,9 @@ w83781d_detect_subclients(struct i2c_client *new_client) for (i = 0; i < num_sc; i++) { data->lm75[i] = i2c_new_dummy(adapter, sc_addr[i]); if (!data->lm75[i]) { - dev_err(&new_client->dev, "Subclient %d " - "registration at address 0x%x " - "failed.\n", i, sc_addr[i]); + dev_err(&new_client->dev, + "Subclient %d registration at address 0x%x failed.\n", + i, sc_addr[i]); err = -ENOMEM; if (i == 1) goto ERROR_SC_3; @@ -1176,8 +1177,9 @@ w83781d_detect(struct i2c_client *client, struct i2c_board_info *info) goto err_nodev; if (val1 <= 0x30 && w83781d_alias_detect(client, val1)) { - dev_dbg(&adapter->dev, "Device at 0x%02x appears to " - "be the same as ISA device\n", address); + dev_dbg(&adapter->dev, + "Device at 0x%02x appears to be the same as ISA device\n", + address); goto err_nodev; } @@ -1367,8 +1369,8 @@ w83781d_init_device(struct device *dev) * as I see very little reason why this would be needed at * all. */ - dev_info(dev, "If reset=1 solved a problem you were " - "having, please report!\n"); + dev_info(dev, + "If reset=1 solved a problem you were having, please report!\n"); /* save these registers */ i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG); @@ -1425,8 +1427,8 @@ w83781d_init_device(struct device *dev) /* Enable temp2 */ tmp = w83781d_read_value(data, W83781D_REG_TEMP2_CONFIG); if (tmp & 0x01) { - dev_warn(dev, "Enabling temp2, readings " - "might not make sense\n"); + dev_warn(dev, + "Enabling temp2, readings might not make sense\n"); w83781d_write_value(data, W83781D_REG_TEMP2_CONFIG, tmp & 0xfe); } @@ -1436,8 +1438,8 @@ w83781d_init_device(struct device *dev) tmp = w83781d_read_value(data, W83781D_REG_TEMP3_CONFIG); if (tmp & 0x01) { - dev_warn(dev, "Enabling temp3, " - "readings might not make sense\n"); + dev_warn(dev, + "Enabling temp3, readings might not make sense\n"); w83781d_write_value(data, W83781D_REG_TEMP3_CONFIG, tmp & 0xfe); } |