diff options
Diffstat (limited to 'arch')
22 files changed, 1230 insertions, 782 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 534d89a60dd..82b2a67f42b 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -59,10 +59,10 @@ endif # Power Management ifeq ($(CONFIG_PM),y) obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o -obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o voltage.o -obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o voltage.o \ +obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o +obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o \ cpuidle34xx.o pm_bus.o -obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o voltage.o pm_bus.o +obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o pm_bus.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o @@ -78,13 +78,25 @@ endif # PRCM obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o -obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o +obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \ + vc3xxx_data.o vp3xxx_data.o # XXX The presence of cm2xxx_3xxx.o on the line below is temporary and # will be removed once the OMAP4 part of the codebase is converted to # use OMAP4-specific PRCM functions. obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \ cm44xx.o prcm_mpu44xx.o \ - prminst44xx.o + prminst44xx.o vc44xx_data.o \ + vp44xx_data.o + +# OMAP voltage domains +ifeq ($(CONFIG_PM),y) +voltagedomain-common := voltage.o +obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) +obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \ + voltagedomains3xxx_data.o +obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) \ + voltagedomains44xx_data.o +endif # OMAP powerdomain framework powerdomain-common += powerdomain.o powerdomain-common.o diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 17b4fb8c347..c819c306693 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -23,7 +23,6 @@ #include <plat/i2c.h> #include <plat/gpio.h> #include <plat/mmc.h> -#include <plat/smartreflex.h> #include <plat/mcbsp.h> #include <plat/mcspi.h> #include <plat/dmtimer.h> diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-omap2/omap_opp_data.h index 46ac27dd6c8..c784c12f98a 100644 --- a/arch/arm/mach-omap2/omap_opp_data.h +++ b/arch/arm/mach-omap2/omap_opp_data.h @@ -21,6 +21,8 @@ #include <plat/omap_hwmod.h> +#include "voltage.h" + /* * *BIG FAT WARNING*: * USE the following ONLY in opp data initialization common to an SoC. @@ -65,8 +67,30 @@ struct omap_opp_def { .u_volt = _uv, \ } +/* + * Initialization wrapper used to define SmartReflex process data + * XXX Is this needed? Just use C99 initializers in data files? + */ +#define VOLT_DATA_DEFINE(_v_nom, _efuse_offs, _errminlimit, _errgain) \ +{ \ + .volt_nominal = _v_nom, \ + .sr_efuse_offs = _efuse_offs, \ + .sr_errminlimit = _errminlimit, \ + .vp_errgain = _errgain \ +} + /* Use this to initialize the default table */ extern int __init omap_init_opp_table(struct omap_opp_def *opp_def, u32 opp_def_size); + +extern struct omap_volt_data omap34xx_vddmpu_volt_data[]; +extern struct omap_volt_data omap34xx_vddcore_volt_data[]; +extern struct omap_volt_data omap36xx_vddmpu_volt_data[]; +extern struct omap_volt_data omap36xx_vddcore_volt_data[]; + +extern struct omap_volt_data omap44xx_vdd_mpu_volt_data[]; +extern struct omap_volt_data omap44xx_vdd_iva_volt_data[]; +extern struct omap_volt_data omap44xx_vdd_core_volt_data[]; + #endif /* __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H */ diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 00e1d2b5368..ad8c18a45ce 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -18,7 +18,7 @@ #include <linux/kernel.h> #include <linux/i2c/twl.h> -#include <plat/voltage.h> +#include "voltage.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c index 0486fce8a92..3bba9204a17 100644 --- a/arch/arm/mach-omap2/opp3xxx_data.c +++ b/arch/arm/mach-omap2/opp3xxx_data.c @@ -4,8 +4,9 @@ * Copyright (C) 2009-2010 Texas Instruments Incorporated - http://www.ti.com/ * Nishanth Menon * Kevin Hilman - * Copyright (C) 2010 Nokia Corporation. + * Copyright (C) 2010-2011 Nokia Corporation. * Eduardo Valentin + * Paul Walmsley * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -20,8 +21,71 @@ #include <plat/cpu.h> +#include "control.h" #include "omap_opp_data.h" +/* 34xx */ + +/* VDD1 */ + +#define OMAP3430_VDD_MPU_OPP1_UV 975000 +#define OMAP3430_VDD_MPU_OPP2_UV 1075000 +#define OMAP3430_VDD_MPU_OPP3_UV 1200000 +#define OMAP3430_VDD_MPU_OPP4_UV 1270000 +#define OMAP3430_VDD_MPU_OPP5_UV 1350000 + +struct omap_volt_data omap34xx_vddmpu_volt_data[] = { + VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP1_UV, OMAP343X_CONTROL_FUSE_OPP1_VDD1, 0xf4, 0x0c), + VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP2_UV, OMAP343X_CONTROL_FUSE_OPP2_VDD1, 0xf4, 0x0c), + VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP3_UV, OMAP343X_CONTROL_FUSE_OPP3_VDD1, 0xf9, 0x18), + VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP4_UV, OMAP343X_CONTROL_FUSE_OPP4_VDD1, 0xf9, 0x18), + VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP5_UV, OMAP343X_CONTROL_FUSE_OPP5_VDD1, 0xf9, 0x18), + VOLT_DATA_DEFINE(0, 0, 0, 0), +}; + +/* VDD2 */ + +#define OMAP3430_VDD_CORE_OPP1_UV 975000 +#define OMAP3430_VDD_CORE_OPP2_UV 1050000 +#define OMAP3430_VDD_CORE_OPP3_UV 1150000 + +struct omap_volt_data omap34xx_vddcore_volt_data[] = { + VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP1_UV, OMAP343X_CONTROL_FUSE_OPP1_VDD2, 0xf4, 0x0c), + VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP2_UV, OMAP343X_CONTROL_FUSE_OPP2_VDD2, 0xf4, 0x0c), + VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP3_UV, OMAP343X_CONTROL_FUSE_OPP3_VDD2, 0xf9, 0x18), + VOLT_DATA_DEFINE(0, 0, 0, 0), +}; + +/* 36xx */ + +/* VDD1 */ + +#define OMAP3630_VDD_MPU_OPP50_UV 1012500 +#define OMAP3630_VDD_MPU_OPP100_UV 1200000 +#define OMAP3630_VDD_MPU_OPP120_UV 1325000 +#define OMAP3630_VDD_MPU_OPP1G_UV 1375000 + +struct omap_volt_data omap36xx_vddmpu_volt_data[] = { + VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP50_UV, OMAP3630_CONTROL_FUSE_OPP50_VDD1, 0xf4, 0x0c), + VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP100_UV, OMAP3630_CONTROL_FUSE_OPP100_VDD1, 0xf9, 0x16), + VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP120_UV, OMAP3630_CONTROL_FUSE_OPP120_VDD1, 0xfa, 0x23), + VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP1G_UV, OMAP3630_CONTROL_FUSE_OPP1G_VDD1, 0xfa, 0x27), + VOLT_DATA_DEFINE(0, 0, 0, 0), +}; + +/* VDD2 */ + +#define OMAP3630_VDD_CORE_OPP50_UV 1000000 +#define OMAP3630_VDD_CORE_OPP100_UV 1200000 + +struct omap_volt_data omap36xx_vddcore_volt_data[] = { + VOLT_DATA_DEFINE(OMAP3630_VDD_CORE_OPP50_UV, OMAP3630_CONTROL_FUSE_OPP50_VDD2, 0xf4, 0x0c), + VOLT_DATA_DEFINE(OMAP3630_VDD_CORE_OPP100_UV, OMAP3630_CONTROL_FUSE_OPP100_VDD2, 0xf9, 0x16), + VOLT_DATA_DEFINE(0, 0, 0, 0), +}; + +/* OPP data */ + static struct omap_opp_def __initdata omap34xx_opp_def_list[] = { /* MPU OPP1 */ OPP_INITIALIZER("mpu", true, 125000000, 975000), diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index a11fa566d8e..fdee8d4186a 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -5,8 +5,9 @@ * Nishanth Menon * Kevin Hilman * Thara Gopinath - * Copyright (C) 2010 Nokia Corporation. + * Copyright (C) 2010-2011 Nokia Corporation. * Eduardo Valentin + * Paul Walmsley * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -21,8 +22,48 @@ #include <plat/cpu.h> +#include "control.h" #include "omap_opp_data.h" +/* + * Structures containing OMAP4430 voltage supported and various + * voltage dependent data for each VDD. + */ + +#define OMAP4430_VDD_MPU_OPP50_UV 930000 +#define OMAP4430_VDD_MPU_OPP100_UV 1100000 +#define OMAP4430_VDD_MPU_OPPTURBO_UV 1260000 +#define OMAP4430_VDD_MPU_OPPNITRO_UV 1350000 + +struct omap_volt_data omap44xx_vdd_mpu_volt_data[] = { + VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c), + VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16), + VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23), + VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27), + VOLT_DATA_DEFINE(0, 0, 0, 0), +}; + +#define OMAP4430_VDD_IVA_OPP50_UV 930000 +#define OMAP4430_VDD_IVA_OPP100_UV 1100000 +#define OMAP4430_VDD_IVA_OPPTURBO_UV 1260000 + +struct omap_volt_data omap44xx_vdd_iva_volt_data[] = { + VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c), + VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP100_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16), + VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23), + VOLT_DATA_DEFINE(0, 0, 0, 0), +}; + +#define OMAP4430_VDD_CORE_OPP50_UV 930000 +#define OMAP4430_VDD_CORE_OPP100_UV 1100000 + +struct omap_volt_data omap44xx_vdd_core_volt_data[] = { + VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c), + VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP100_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100, 0xf9, 0x16), + VOLT_DATA_DEFINE(0, 0, 0, 0), +}; + + static struct omap_opp_def __initdata omap44xx_opp_def_list[] = { /* MPU OPP1 - OPP50 */ OPP_INITIALIZER("mpu", true, 300000000, 1100000), diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 7bb64d8121a..2c3a2531e67 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -18,8 +18,8 @@ #include <plat/omap-pm.h> #include <plat/omap_device.h> #include <plat/common.h> -#include <plat/voltage.h> +#include "voltage.h" #include "powerdomain.h" #include "clockdomain.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c index 60e70552b4c..f438cf4d847 100644 --- a/arch/arm/mach-omap2/smartreflex-class3.c +++ b/arch/arm/mach-omap2/smartreflex-class3.c @@ -11,7 +11,7 @@ * published by the Free Software Foundation. */ -#include <plat/smartreflex.h> +#include "smartreflex.h" static int sr_class3_enable(struct voltagedomain *voltdm) { diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 95ac336fe3f..cf0bf5db47d 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -26,9 +26,9 @@ #include <linux/pm_runtime.h> #include <plat/common.h> -#include <plat/smartreflex.h> #include "pm.h" +#include "smartreflex.h" #define SMARTREFLEX_NAME_LEN 16 #define NVALUE_NAME_LEN 40 diff --git a/arch/arm/plat-omap/include/plat/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h index 6568c885f37..5f35b9e2555 100644 --- a/arch/arm/plat-omap/include/plat/smartreflex.h +++ b/arch/arm/mach-omap2/smartreflex.h @@ -21,7 +21,8 @@ #define __ASM_ARM_OMAP_SMARTREFLEX_H #include <linux/platform_device.h> -#include <plat/voltage.h> + +#include "voltage.h" /* * Different Smartreflex IPs version. The v1 is the 65nm version used in diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index b1e0af18a26..10d3c5ee801 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -23,9 +23,9 @@ #include <linux/io.h> #include <plat/omap_device.h> -#include <plat/smartreflex.h> -#include <plat/voltage.h> +#include "smartreflex.h" +#include "voltage.h" #include "control.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h new file mode 100644 index 00000000000..e7767771de4 --- /dev/null +++ b/arch/arm/mach-omap2/vc.h @@ -0,0 +1,83 @@ +/* + * OMAP3/4 Voltage Controller (VC) structure and macro definitions + * + * Copyright (C) 2007, 2010 Texas Instruments, Inc. + * Rajendra Nayak <rnayak@ti.com> + * Lesly A M <x0080970@ti.com> + * Thara Gopinath <thara@ti.com> + * + * Copyright (C) 2008, 2011 Nokia Corporation + * Kalle Jokiniemi + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ +#ifndef __ARCH_ARM_MACH_OMAP2_VC_H +#define __ARCH_ARM_MACH_OMAP2_VC_H + +#include <linux/kernel.h> + +/** + * struct omap_vc_common_data - per-VC register/bitfield data + * @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register + * @valid: VALID bitmask in PRM_VC_BYPASS_VAL register + * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start + * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start + * @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start + * @data_shift: DATA field shift in PRM_VC_BYPASS_VAL register + * @slaveaddr_shift: SLAVEADDR field shift in PRM_VC_BYPASS_VAL register + * @regaddr_shift: REGADDR field shift in PRM_VC_BYPASS_VAL register + * @cmd_on_shift: ON field shift in PRM_VC_CMD_VAL_* register + * @cmd_onlp_shift: ONLP field shift in PRM_VC_CMD_VAL_* register + * @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register + * @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register + * + * XXX One of cmd_on_mask and cmd_on_shift are not needed + * XXX VALID should probably be a shift, not a mask + */ +struct omap_vc_common_data { + u32 cmd_on_mask; + u32 valid; + u8 smps_sa_reg; + u8 smps_volra_reg; + u8 bypass_val_reg; + u8 data_shift; + u8 slaveaddr_shift; + u8 regaddr_shift; + u8 cmd_on_shift; + u8 cmd_onlp_shift; + u8 cmd_ret_shift; + u8 cmd_off_shift; +}; + +/** + * struct omap_vc_instance_data - VC per-instance data + * @vc_common: pointer to VC common data for this platform + * @smps_sa_mask: SA* bitmask in the PRM_VC_SMPS_SA register + * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register + * @smps_sa_shift: SA* field shift in the PRM_VC_SMPS_SA register + * @smps_volra_shift: VOLRA* field shift in the PRM_VC_VOL_RA register + * + * XXX It is not necessary to have both a *_mask and a *_shift - + * remove one + */ +struct omap_vc_instance_data { + const struct omap_vc_common_data *vc_common; + u32 smps_sa_mask; + u32 smps_volra_mask; + u8 cmdval_reg; + u8 smps_sa_shift; + u8 smps_volra_shift; +}; + +extern struct omap_vc_instance_data omap3_vc1_data; +extern struct omap_vc_instance_data omap3_vc2_data; + +extern struct omap_vc_instance_data omap4_vc_mpu_data; +extern struct omap_vc_instance_data omap4_vc_iva_data; +extern struct omap_vc_instance_data omap4_vc_core_data; + +#endif + diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c new file mode 100644 index 00000000000..f37dc4bc379 --- /dev/null +++ b/arch/arm/mach-omap2/vc3xxx_data.c @@ -0,0 +1,63 @@ +/* + * OMAP3 Voltage Controller (VC) data + * + * Copyright (C) 2007, 2010 Texas Instruments, Inc. + * Rajendra Nayak <rnayak@ti.com> + * Lesly A M <x0080970@ti.com> + * Thara Gopinath <thara@ti.com> + * + * Copyright (C) 2008, 2011 Nokia Corporation + * Kalle Jokiniemi + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/io.h> +#include <linux/err.h> +#include <linux/init.h> + +#include <plat/common.h> + +#include "prm-regbits-34xx.h" +#include "voltage.h" + +#include "vc.h" + +/* + * VC data common to 34xx/36xx chips + * XXX This stuff presumably belongs in the vc3xxx.c or vc.c file. + */ +static struct omap_vc_common_data omap3_vc_common = { + .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET, + .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET, + .bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET, + .data_shift = OMAP3430_DATA_SHIFT, + .slaveaddr_shift = OMAP3430_SLAVEADDR_SHIFT, + .regaddr_shift = OMAP3430_REGADDR_SHIFT, + .valid = OMAP3430_VALID_MASK, + .cmd_on_shift = OMAP3430_VC_CMD_ON_SHIFT, + .cmd_on_mask = OMAP3430_VC_CMD_ON_MASK, + .cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT, + .cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT, + .cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT, +}; + +struct omap_vc_instance_data omap3_vc1_data = { + .vc_common = &omap3_vc_common, + .cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET, + .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT, + .smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK, + .smps_volra_shift = OMAP3430_VOLRA0_SHIFT, + .smps_volra_mask = OMAP3430_VOLRA0_MASK, +}; + +struct omap_vc_instance_data omap3_vc2_data = { + .vc_common = &omap3_vc_common, + .cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET, + .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT, + .smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK, + .smps_volra_shift = OMAP3430_VOLRA1_SHIFT, + .smps_volra_mask = OMAP3430_VOLRA1_MASK, +}; diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c new file mode 100644 index 00000000000..a98da8ddec5 --- /dev/null +++ b/arch/arm/mach-omap2/vc44xx_data.c @@ -0,0 +1,75 @@ +/* + * OMAP4 Voltage Controller (VC) data + * + * Copyright (C) 2007, 2010 Texas Instruments, Inc. + * Rajendra Nayak <rnayak@ti.com> + * Lesly A M <x0080970@ti.com> + * Thara Gopinath <thara@ti.com> + * + * Copyright (C) 2008, 2011 Nokia Corporation + * Kalle Jokiniemi + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/io.h> +#include <linux/err.h> +#include <linux/init.h> + +#include <plat/common.h> + +#include "prm44xx.h" +#include "prm-regbits-44xx.h" +#include "voltage.h" + +#include "vc.h" + +/* + * VC data common to 44xx chips + * XXX This stuff presumably belongs in the vc3xxx.c or vc.c file. + */ +static const struct omap_vc_common_data omap4_vc_common = { + .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET, + .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET, + .bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET, + .data_shift = OMAP4430_DATA_SHIFT, + .slaveaddr_shift = OMAP4430_SLAVEADDR_SHIFT, + .regaddr_shift = OMAP4430_REGADDR_SHIFT, + .valid = OMAP4430_VALID_MASK, + .cmd_on_shift = OMAP4430_ON_SHIFT, + .cmd_on_mask = OMAP4430_ON_MASK, + .cmd_onlp_shift = OMAP4430_ONLP_SHIFT, + .cmd_ret_shift = OMAP4430_RET_SHIFT, + .cmd_off_shift = OMAP4430_OFF_SHIFT, +}; + +/* VC instance data for each controllable voltage line */ +struct omap_vc_instance_data omap4_vc_mpu_data = { + .vc_common = &omap4_vc_common, + .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET, + .smps_sa_shift = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT, + .smps_sa_mask = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK, + .smps_volra_shift = OMAP4430_VOLRA_VDD_MPU_L_SHIFT, + .smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK, +}; + +struct omap_vc_instance_data omap4_vc_iva_data = { + .vc_common = &omap4_vc_common, + .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET, + .smps_sa_shift = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT, + .smps_sa_mask = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK, + .smps_volra_shift = OMAP4430_VOLRA_VDD_IVA_L_SHIFT, + .smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK, +}; + +struct omap_vc_instance_data omap4_vc_core_data = { + .vc_common = &omap4_vc_common, + .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET, + .smps_sa_shift = OMAP4430_SA_VDD_CORE_L_0_6_SHIFT, + .smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK, + .smps_volra_shift = OMAP4430_VOLRA_VDD_CORE_L_SHIFT, + .smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK, +}; + diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 12be525b8df..c6facf7becf 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -7,8 +7,9 @@ * Rajendra Nayak <rnayak@ti.com> * Lesly A M <x0080970@ti.com> * - * Copyright (C) 2008 Nokia Corporation + * Copyright (C) 2008, 2011 Nokia Corporation * Kalle Jokiniemi + * Paul Walmsley * * Copyright (C) 2010 Texas Instruments, Inc. * Thara Gopinath <thara@ti.com> @@ -26,7 +27,6 @@ #include <linux/slab.h> #include <plat/common.h> -#include <plat/voltage.h> #include "prm-regbits-34xx.h" #include "prm-regbits-44xx.h" @@ -35,284 +35,30 @@ #include "prminst44xx.h" #include "control.h" -#define VP_IDLE_TIMEOUT 200 -#define VP_TRANXDONE_TIMEOUT 300 -#define VOLTAGE_DIR_SIZE 16 +#include "voltage.h" -/* Voltage processor register offsets */ -struct vp_reg_offs { - u8 vpconfig; - u8 vstepmin; - u8 vstepmax; - u8 vlimitto; - u8 vstatus; - u8 voltage; -}; +#include "vc.h" +#include "vp.h" -/* Voltage Processor bit field values, shifts and masks */ -struct vp_reg_val { - /* PRM module */ - u16 prm_mod; - /* VPx_VPCONFIG */ - u32 vpconfig_erroroffset; - u16 vpconfig_errorgain; - u32 vpconfig_errorgain_mask; - u8 vpconfig_errorgain_shift; - u32 vpconfig_initvoltage_mask; - u8 vpconfig_initvoltage_shift; - u32 vpconfig_timeouten; - u32 vpconfig_initvdd; - u32 vpconfig_forceupdate; - u32 vpconfig_vpenable; - /* VPx_VSTEPMIN */ - u8 vstepmin_stepmin; - u16 vstepmin_smpswaittimemin; - u8 vstepmin_stepmin_shift; - u8 vstepmin_smpswaittimemin_shift; - /* VPx_VSTEPMAX */ - u8 vstepmax_stepmax; - u16 vstepmax_smpswaittimemax; - u8 vstepmax_stepmax_shift; - u8 vstepmax_smpswaittimemax_shift; - /* VPx_VLIMITTO */ - u8 vlimitto_vddmin; - u8 vlimitto_vddmax; - u16 vlimitto_timeout; - u8 vlimitto_vddmin_shift; - u8 vlimitto_vddmax_shift; - u8 vlimitto_timeout_shift; - /* PRM_IRQSTATUS*/ - u32 tranxdone_status; -}; +#define VOLTAGE_DIR_SIZE 16 -/* Voltage controller registers and offsets */ -struct vc_reg_info { - /* PRM module */ - u16 prm_mod; - /* VC register offsets */ - u8 smps_sa_reg; - u8 smps_volra_reg; - u8 bypass_val_reg; - u8 cmdval_reg; - u8 voltsetup_reg; - /*VC_SMPS_SA*/ - u8 smps_sa_shift; - u32 smps_sa_mask; - /* VC_SMPS_VOL_RA */ - u8 smps_volra_shift; - u32 smps_volra_mask; - /* VC_BYPASS_VAL */ - u8 data_shift; - u8 slaveaddr_shift; - u8 regaddr_shift; - u32 valid; - /* VC_CMD_VAL */ - u8 cmd_on_shift; - u8 cmd_onlp_shift; - u8 cmd_ret_shift; - u8 cmd_off_shift; - u32 cmd_on_mask; - /* PRM_VOLTSETUP */ - u8 voltsetup_shift; - u32 voltsetup_mask; -}; -/** - * omap_vdd_info - Per Voltage Domain info - * - * @volt_data : voltage table having the distinct voltages supported - * by the domain and other associated per voltage data. - * @pmic_info : pmic specific parameters which should be populted by - * the pmic drivers. - * @vp_offs : structure containing the offsets for various - * vp registers - * @vp_reg : the register values, shifts, masks for various - * vp registers - * @vc_reg : structure containing various various vc registers, - * shifts, masks etc. - * @voltdm : pointer to the voltage domain structure - * @debug_dir : debug directory for this voltage domain. - * @curr_volt : current voltage for this vdd. - * @ocp_mod : The prm module for accessing the prm irqstatus reg. - * @prm_irqst_reg : prm irqstatus register. - * @vp_enabled : flag to keep track of whether vp is enabled or not - * @volt_scale : API to scale the voltage of the vdd. - */ -struct omap_vdd_info { - struct omap_volt_data *volt_data; - struct omap_volt_pmic_info *pmic_info; - struct vp_reg_offs vp_offs; - struct vp_reg_val vp_reg; - struct vc_reg_info vc_reg; - struct voltagedomain voltdm; - struct dentry *debug_dir; - u32 curr_volt; - u16 ocp_mod; - u8 prm_irqst_reg; - bool vp_enabled; - u32 (*read_reg) (u16 mod, u8 offset); - void (*write_reg) (u32 val, u16 mod, u8 offset); - int (*volt_scale) (struct omap_vdd_info *vdd, - unsigned long target_volt); -}; +static struct omap_vdd_info **vdd_info; -static struct omap_vdd_info *vdd_info; /* * Number of scalable voltage domains. */ static int nr_scalable_vdd; -/* OMAP3 VDD sturctures */ -static struct omap_vdd_info omap3_vdd_info[] = { - { - .vp_offs = { - .vpconfig = OMAP3_PRM_VP1_CONFIG_OFFSET, - .vstepmin = OMAP3_PRM_VP1_VSTEPMIN_OFFSET, - .vstepmax = OMAP3_PRM_VP1_VSTEPMAX_OFFSET, - .vlimitto = OMAP3_PRM_VP1_VLIMITTO_OFFSET, - .vstatus = OMAP3_PRM_VP1_STATUS_OFFSET, - .voltage = OMAP3_PRM_VP1_VOLTAGE_OFFSET, - }, - .voltdm = { - .name = "mpu", - }, - }, - { - .vp_offs = { - .vpconfig = OMAP3_PRM_VP2_CONFIG_OFFSET, - .vstepmin = OMAP3_PRM_VP2_VSTEPMIN_OFFSET, - .vstepmax = OMAP3_PRM_VP2_VSTEPMAX_OFFSET, - .vlimitto = OMAP3_PRM_VP2_VLIMITTO_OFFSET, - .vstatus = OMAP3_PRM_VP2_STATUS_OFFSET, - .voltage = OMAP3_PRM_VP2_VOLTAGE_OFFSET, - }, - .voltdm = { - .name = "core", - }, - }, -}; - -#define OMAP3_NR_SCALABLE_VDD ARRAY_SIZE(omap3_vdd_info) - -/* OMAP4 VDD sturctures */ -static struct omap_vdd_info omap4_vdd_info[] = { - { - .vp_offs = { - .vpconfig = OMAP4_PRM_VP_MPU_CONFIG_OFFSET, - .vstepmin = OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET, - .vstepmax = OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET, - .vlimitto = OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET, - .vstatus = OMAP4_PRM_VP_MPU_STATUS_OFFSET, - .voltage = OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET, - }, - .voltdm = { - .name = "mpu", - }, - }, - { - .vp_offs = { - .vpconfig = OMAP4_PRM_VP_IVA_CONFIG_OFFSET, - .vstepmin = OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET, - .vstepmax = OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET, - .vlimitto = OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET, - .vstatus = OMAP4_PRM_VP_IVA_STATUS_OFFSET, - .voltage = OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET, - }, - .voltdm = { - .name = "iva", - }, - }, - { - .vp_offs = { - .vpconfig = OMAP4_PRM_VP_CORE_CONFIG_OFFSET, - .vstepmin = OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET, - .vstepmax = OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET, - .vlimitto = OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET, - .vstatus = OMAP4_PRM_VP_CORE_STATUS_OFFSET, - .voltage = OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET, - }, - .voltdm = { - .name = "core", - }, - }, -}; - -#define OMAP4_NR_SCALABLE_VDD ARRAY_SIZE(omap4_vdd_info) - -/* - * Structures containing OMAP3430/OMAP3630 voltage supported and various - * voltage dependent data for each VDD. - */ -#define VOLT_DATA_DEFINE(_v_nom, _efuse_offs, _errminlimit, _errgain) \ -{ \ - .volt_nominal = _v_nom, \ - .sr_efuse_offs = _efuse_offs, \ - .sr_errminlimit = _errminlimit, \ - .vp_errgain = _errgain \ -} - -/* VDD1 */ -static struct omap_volt_data omap34xx_vddmpu_volt_data[] = { - VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP1_UV, OMAP343X_CONTROL_FUSE_OPP1_VDD1, 0xf4, 0x0c), - VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP2_UV, OMAP343X_CONTROL_FUSE_OPP2_VDD1, 0xf4, 0x0c), - VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP3_UV, OMAP343X_CONTROL_FUSE_OPP3_VDD1, 0xf9, 0x18), - VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP4_UV, OMAP343X_CONTROL_FUSE_OPP4_VDD1, 0xf9, 0x18), - VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP5_UV, OMAP343X_CONTROL_FUSE_OPP5_VDD1, 0xf9, 0x18), - VOLT_DATA_DEFINE(0, 0, 0, 0), -}; - -static struct omap_volt_data omap36xx_vddmpu_volt_data[] = { - VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP50_UV, OMAP3630_CONTROL_FUSE_OPP50_VDD1, 0xf4, 0x0c), - VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP100_UV, OMAP3630_CONTROL_FUSE_OPP100_VDD1, 0xf9, 0x16), - VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP120_UV, OMAP3630_CONTROL_FUSE_OPP120_VDD1, 0xfa, 0x23), - VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP1G_UV, OMAP3630_CONTROL_FUSE_OPP1G_VDD1, 0xfa, 0x27), - VOLT_DATA_DEFINE(0, 0, 0, 0), -}; - -/* VDD2 */ -static struct omap_volt_data omap34xx_vddcore_volt_data[] = { - VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP1_UV, OMAP343X_CONTROL_FUSE_OPP1_VDD2, 0xf4, 0x0c), - VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP2_UV, OMAP343X_CONTROL_FUSE_OPP2_VDD2, 0xf4, 0x0c), - VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP3_UV, OMAP343X_CONTROL_FUSE_OPP3_VDD2, 0xf9, 0x18), - VOLT_DATA_DEFINE(0, 0, 0, 0), -}; - -static struct omap_volt_data omap36xx_vddcore_volt_data[] = { - VOLT_DATA_DEFINE(OMAP3630_VDD_CORE_OPP50_UV, OMAP3630_CONTROL_FUSE_OPP50_VDD2, 0xf4, 0x0c), - VOLT_DATA_DEFINE(OMAP3630_VDD_CORE_OPP100_UV, OMAP3630_CONTROL_FUSE_OPP100_VDD2, 0xf9, 0x16), - VOLT_DATA_DEFINE(0, 0, 0, 0), -}; - -/* - * Structures containing OMAP4430 voltage supported and various - * voltage dependent data for each VDD. - */ -static struct omap_volt_data omap44xx_vdd_mpu_volt_data[] = { - VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c), - VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16), - VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23), - VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27), - VOLT_DATA_DEFINE(0, 0, 0, 0), -}; - -static struct omap_volt_data omap44xx_vdd_iva_volt_data[] = { - VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c), - VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP100_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16), - VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23), - VOLT_DATA_DEFINE(0, 0, 0, 0), -}; - -static struct omap_volt_data omap44xx_vdd_core_volt_data[] = { - VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c), - VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP100_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100, 0xf9, 0x16), - VOLT_DATA_DEFINE(0, 0, 0, 0), -}; +/* XXX document */ +static s16 prm_mod_offs; +static s16 prm_irqst_ocp_mod_offs; static struct dentry *voltage_dir; /* Init function pointers */ -static void (*vc_init) (struct omap_vdd_info *vdd); -static int (*vdd_data_configure) (struct omap_vdd_info *vdd); +static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, + unsigned long target_volt); static u32 omap3_voltage_read_reg(u16 mod, u8 offset) { @@ -335,6 +81,62 @@ static void omap4_voltage_write_reg(u32 val, u16 mod, u8 offset) omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION, mod, offset); } +static int __init _config_common_vdd_data(struct omap_vdd_info *vdd) +{ + char *sys_ck_name; + struct clk *sys_ck; + u32 sys_clk_speed, timeout_val, waittime; + + /* + * XXX Clockfw should handle this, or this should be in a + * struct record + */ + if (cpu_is_omap24xx() || cpu_is_omap34xx()) + sys_ck_name = "sys_ck"; + else if (cpu_is_omap44xx()) + sys_ck_name = "sys_clkin_ck"; + else + return -EINVAL; + + /* + * Sys clk rate is require to calculate vp timeout value and + * smpswaittimemin and smpswaittimemax. + */ + sys_ck = clk_get(NULL, sys_ck_name); + if (IS_ERR(sys_ck)) { + pr_warning("%s: Could not get the sys clk to calculate" + "various vdd_%s params\n", __func__, vdd->voltdm.name); + return -EINVAL; + } + sys_clk_speed = clk_get_rate(sys_ck); + clk_put(sys_ck); + /* Divide to avoid overflow */ + sys_clk_speed /= 1000; + + /* Generic voltage parameters */ + vdd->curr_volt = 1200000; + vdd->volt_scale = vp_forceupdate_scale_voltage; + vdd->vp_enabled = false; + + vdd->vp_rt_data.vpconfig_erroroffset = + (vdd->pmic_info->vp_erroroffset << + vdd->vp_data->vp_common->vpconfig_erroroffset_shift); + + timeout_val = (sys_clk_speed * vdd->pmic_info->vp_timeout_us) / 1000; + vdd->vp_rt_data.vlimitto_timeout = timeout_val; + vdd->vp_rt_data.vlimitto_vddmin = vdd->pmic_info->vp_vddmin; + vdd->vp_rt_data.vlimitto_vddmax = vdd->pmic_info->vp_vddmax; + + waittime = ((vdd->pmic_info->step_size / vdd->pmic_info->slew_rate) * + sys_clk_speed) / 1000; + vdd->vp_rt_data.vstepmin_smpswaittimemin = waittime; + vdd->vp_rt_data.vstepmax_smpswaittimemax = waittime; + vdd->vp_rt_data.vstepmin_stepmin = vdd->pmic_info->vp_vstepmin; + vdd->vp_rt_data.vstepmax_stepmax = vdd->pmic_info->vp_vstepmax; + + return 0; +} + /* Voltage debugfs support */ static int vp_volt_debug_get(void *data, u64 *val) { @@ -346,7 +148,7 @@ static int vp_volt_debug_get(void *data, u64 *val) return -EINVAL; } - vsel = vdd->read_reg(vdd->vp_reg.prm_mod, vdd->vp_offs.voltage); + vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage); pr_notice("curr_vsel = %x\n", vsel); if (!vdd->pmic_info->vsel_to_uv) { @@ -379,7 +181,6 @@ DEFINE_SIMPLE_ATTRIBUTE(nom_volt_debug_fops, nom_volt_debug_get, NULL, static void vp_latch_vsel(struct omap_vdd_info *vdd) { u32 vpconfig; - u16 mod; unsigned long uvdc; char vsel; @@ -396,30 +197,27 @@ static void vp_latch_vsel(struct omap_vdd_info *vdd) return; } - mod = vdd->vp_reg.prm_mod; - vsel = vdd->pmic_info->uv_to_vsel(uvdc); - vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig); - vpconfig &= ~(vdd->vp_reg.vpconfig_initvoltage_mask | - vdd->vp_reg.vpconfig_initvdd); - vpconfig |= vsel << vdd->vp_reg.vpconfig_initvoltage_shift; + vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); + vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvoltage_mask | + vdd->vp_data->vp_common->vpconfig_initvdd); + vpconfig |= vsel << vdd->vp_data->vp_common->vpconfig_initvoltage_shift; - vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig); + vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); /* Trigger initVDD value copy to voltage processor */ - vdd->write_reg((vpconfig | vdd->vp_reg.vpconfig_initvdd), mod, - vdd->vp_offs.vpconfig); + vdd->write_reg((vpconfig | vdd->vp_data->vp_common->vpconfig_initvdd), + prm_mod_offs, vdd->vp_data->vpconfig); /* Clear initVDD copy trigger bit */ - vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig); + vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); } /* Generic voltage init functions */ static void __init vp_init(struct omap_vdd_info *vdd) { u32 vp_val; - u16 mod; if (!vdd->read_reg || !vdd->write_reg) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", @@ -427,33 +225,31 @@ static void __init vp_init(struct omap_vdd_info *vdd) return; } - mod = vdd->vp_reg.prm_mod; - - vp_val = vdd->vp_reg.vpconfig_erroroffset | - (vdd->vp_reg.vpconfig_errorgain << - vdd->vp_reg.vpconfig_errorgain_shift) | - vdd->vp_reg.vpconfig_timeouten; - vdd->write_reg(vp_val, mod, vdd->vp_offs.vpconfig); + vp_val = vdd->vp_rt_data.vpconfig_erroroffset | + (vdd->vp_rt_data.vpconfig_errorgain << + vdd->vp_data->vp_common->vpconfig_errorgain_shift) | + vdd->vp_data->vp_common->vpconfig_timeouten; + vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vpconfig); - vp_val = ((vdd->vp_reg.vstepmin_smpswaittimemin << - vdd->vp_reg.vstepmin_smpswaittimemin_shift) | - (vdd->vp_reg.vstepmin_stepmin << - vdd->vp_reg.vstepmin_stepmin_shift)); - vdd->write_reg(vp_val, mod, vdd->vp_offs.vstepmin); + vp_val = ((vdd->vp_rt_data.vstepmin_smpswaittimemin << + vdd->vp_data->vp_common->vstepmin_smpswaittimemin_shift) | + (vdd->vp_rt_data.vstepmin_stepmin << + vdd->vp_data->vp_common->vstepmin_stepmin_shift)); + vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmin); - vp_val = ((vdd->vp_reg.vstepmax_smpswaittimemax << - vdd->vp_reg.vstepmax_smpswaittimemax_shift) | - (vdd->vp_reg.vstepmax_stepmax << - vdd->vp_reg.vstepmax_stepmax_shift)); - vdd->write_reg(vp_val, mod, vdd->vp_offs.vstepmax); + vp_val = ((vdd->vp_rt_data.vstepmax_smpswaittimemax << + vdd->vp_data->vp_common->vstepmax_smpswaittimemax_shift) | + (vdd->vp_rt_data.vstepmax_stepmax << + vdd->vp_data->vp_common->vstepmax_stepmax_shift)); + vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmax); - vp_val = ((vdd->vp_reg.vlimitto_vddmax << - vdd->vp_reg.vlimitto_vddmax_shift) | - (vdd->vp_reg.vlimitto_vddmin << - vdd->vp_reg.vlimitto_vddmin_shift) | - (vdd->vp_reg.vlimitto_timeout << - vdd->vp_reg.vlimitto_timeout_shift)); - vdd->write_reg(vp_val, mod, vdd->vp_offs.vlimitto); + vp_val = ((vdd->vp_rt_data.vlimitto_vddmax << + vdd->vp_data->vp_common->vlimitto_vddmax_shift) | + (vdd->vp_rt_data.vlimitto_vddmin << + vdd->vp_data->vp_common->vlimitto_vddmin_shift) | + (vdd->vp_rt_data.vlimitto_timeout << + vdd->vp_data->vp_common->vlimitto_timeout_shift)); + vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vlimitto); } static void __init vdd_debugfs_init(struct omap_vdd_info *vdd) @@ -480,23 +276,23 @@ static void __init vdd_debugfs_init(struct omap_vdd_info *vdd) } (void) debugfs_create_x16("vp_errorgain", S_IRUGO, vdd->debug_dir, - &(vdd->vp_reg.vpconfig_errorgain)); + &(vdd->vp_rt_data.vpconfig_errorgain)); (void) debugfs_create_x16("vp_smpswaittimemin", S_IRUGO, vdd->debug_dir, - &(vdd->vp_reg.vstepmin_smpswaittimemin)); + &(vdd->vp_rt_data.vstepmin_smpswaittimemin)); (void) debugfs_create_x8("vp_stepmin", S_IRUGO, vdd->debug_dir, - &(vdd->vp_reg.vstepmin_stepmin)); + &(vdd->vp_rt_data.vstepmin_stepmin)); (void) debugfs_create_x16("vp_smpswaittimemax", S_IRUGO, vdd->debug_dir, - &(vdd->vp_reg.vstepmax_smpswaittimemax)); + &(vdd->vp_rt_data.vstepmax_smpswaittimemax)); (void) debugfs_create_x8("vp_stepmax", S_IRUGO, vdd->debug_dir, - &(vdd->vp_reg.vstepmax_stepmax)); + &(vdd->vp_rt_data.vstepmax_stepmax)); (void) debugfs_create_x8("vp_vddmax", S_IRUGO, vdd->debug_dir, - &(vdd->vp_reg.vlimitto_vddmax)); + &(vdd->vp_rt_data.vlimitto_vddmax)); (void) debugfs_create_x8("vp_vddmin", S_IRUGO, vdd->debug_dir, - &(vdd->vp_reg.vlimitto_vddmin)); + &(vdd->vp_rt_data.vlimitto_vddmin)); (void) debugfs_create_x16("vp_timeout", S_IRUGO, vdd->debug_dir, - &(vdd->vp_reg.vlimitto_timeout)); + &(vdd->vp_rt_data.vlimitto_timeout)); (void) debugfs_create_file("curr_vp_volt", S_IRUGO, vdd->debug_dir, (void *) vdd, &vp_volt_debug_fops); (void) debugfs_create_file("curr_nominal_volt", S_IRUGO, @@ -509,8 +305,12 @@ static int _pre_volt_scale(struct omap_vdd_info *vdd, unsigned long target_volt, u8 *target_vsel, u8 *current_vsel) { struct omap_volt_data *volt_data; + const struct omap_vc_common_data *vc_common; + const struct omap_vp_common_data *vp_common; u32 vc_cmdval, vp_errgain_val; - u16 vp_mod, vc_mod; + + vc_common = vdd->vc_data->vc_common; + vp_common = vdd->vp_data->vp_common; /* Check if suffiecient pmic info is available for this vdd */ if (!vdd->pmic_info) { @@ -532,33 +332,30 @@ static int _pre_volt_scale(struct omap_vdd_info *vdd, return -EINVAL; } - vp_mod = vdd->vp_reg.prm_mod; - vc_mod = vdd->vc_reg.prm_mod; - /* Get volt_data corresponding to target_volt */ volt_data = omap_voltage_get_voltdata(&vdd->voltdm, target_volt); if (IS_ERR(volt_data)) volt_data = NULL; *target_vsel = vdd->pmic_info->uv_to_vsel(target_volt); - *current_vsel = vdd->read_reg(vp_mod, vdd->vp_offs.voltage); + *current_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage); /* Setting the ON voltage to the new target voltage */ - vc_cmdval = vdd->read_reg(vc_mod, vdd->vc_reg.cmdval_reg); - vc_cmdval &= ~vdd->vc_reg.cmd_on_mask; - vc_cmdval |= (*target_vsel << vdd->vc_reg.cmd_on_shift); - vdd->write_reg(vc_cmdval, vc_mod, vdd->vc_reg.cmdval_reg); + vc_cmdval = vdd->read_reg(prm_mod_offs, vdd->vc_data->cmdval_reg); + vc_cmdval &= ~vc_common->cmd_on_mask; + vc_cmdval |= (*target_vsel << vc_common->cmd_on_shift); + vdd->write_reg(vc_cmdval, prm_mod_offs, vdd->vc_data->cmdval_reg); /* Setting vp errorgain based on the voltage */ if (volt_data) { - vp_errgain_val = vdd->read_reg(vp_mod, - vdd->vp_offs.vpconfig); - vdd->vp_reg.vpconfig_errorgain = volt_data->vp_errgain; - vp_errgain_val &= ~vdd->vp_reg.vpconfig_errorgain_mask; - vp_errgain_val |= vdd->vp_reg.vpconfig_errorgain << - vdd->vp_reg.vpconfig_errorgain_shift; - vdd->write_reg(vp_errgain_val, vp_mod, - vdd->vp_offs.vpconfig); + vp_errgain_val = vdd->read_reg(prm_mod_offs, + vdd->vp_data->vpconfig); + vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain; + vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask; + vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain << + vp_common->vpconfig_errorgain_shift; + vdd->write_reg(vp_errgain_val, prm_mod_offs, + vdd->vp_data->vpconfig); } return 0; @@ -584,7 +381,6 @@ static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd, { u32 loop_cnt = 0, retries_cnt = 0; u32 vc_valid, vc_bypass_val_reg, vc_bypass_value; - u16 mod; u8 target_vsel, current_vsel; int ret; @@ -592,20 +388,19 @@ static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd, if (ret) return ret; - mod = vdd->vc_reg.prm_mod; - - vc_valid = vdd->vc_reg.valid; - vc_bypass_val_reg = vdd->vc_reg.bypass_val_reg; - vc_bypass_value = (target_vsel << vdd->vc_reg.data_shift) | + vc_valid = vdd->vc_data->vc_common->valid; + vc_bypass_val_reg = vdd->vc_data->vc_common->bypass_val_reg; + vc_bypass_value = (target_vsel << vdd->vc_data->vc_common->data_shift) | (vdd->pmic_info->pmic_reg << - vdd->vc_reg.regaddr_shift) | + vdd->vc_data->vc_common->regaddr_shift) | (vdd->pmic_info->i2c_slave_addr << - vdd->vc_reg.slaveaddr_shift); + vdd->vc_data->vc_common->slaveaddr_shift); - vdd->write_reg(vc_bypass_value, mod, vc_bypass_val_reg); - vdd->write_reg(vc_bypass_value | vc_valid, mod, vc_bypass_val_reg); + vdd->write_reg(vc_bypass_value, prm_mod_offs, vc_bypass_val_reg); + vdd->write_reg(vc_bypass_value | vc_valid, prm_mod_offs, + vc_bypass_val_reg); - vc_bypass_value = vdd->read_reg(mod, vc_bypass_val_reg); + vc_bypass_value = vdd->read_reg(prm_mod_offs, vc_bypass_val_reg); /* * Loop till the bypass command is acknowledged from the SMPS. * NOTE: This is legacy code. The loop count and retry count needs @@ -624,7 +419,8 @@ static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd, loop_cnt = 0; udelay(10); } - vc_bypass_value = vdd->read_reg(mod, vc_bypass_val_reg); + vc_bypass_value = vdd->read_reg(prm_mod_offs, + vc_bypass_val_reg); } _post_volt_scale(vdd, target_volt, target_vsel, current_vsel); @@ -636,7 +432,6 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, unsigned long target_volt) { u32 vpconfig; - u16 mod, ocp_mod; u8 target_vsel, current_vsel, prm_irqst_reg; int ret, timeout = 0; @@ -644,20 +439,18 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, if (ret) return ret; - mod = vdd->vp_reg.prm_mod; - ocp_mod = vdd->ocp_mod; - prm_irqst_reg = vdd->prm_irqst_reg; + prm_irqst_reg = vdd->vp_data->prm_irqst_data->prm_irqst_reg; /* * Clear all pending TransactionDone interrupt/status. Typical latency * is <3us */ while (timeout++ < VP_TRANXDONE_TIMEOUT) { - vdd->write_reg(vdd->vp_reg.tranxdone_status, - ocp_mod, prm_irqst_reg); - if (!(vdd->read_reg(ocp_mod, prm_irqst_reg) & - vdd->vp_reg.tranxdone_status)) - break; + vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status, + prm_irqst_ocp_mod_offs, prm_irqst_reg); + if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) & + vdd->vp_data->prm_irqst_data->tranxdone_status)) + break; udelay(1); } if (timeout >= VP_TRANXDONE_TIMEOUT) { @@ -667,30 +460,30 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, } /* Configure for VP-Force Update */ - vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig); - vpconfig &= ~(vdd->vp_reg.vpconfig_initvdd | - vdd->vp_reg.vpconfig_forceupdate | - vdd->vp_reg.vpconfig_initvoltage_mask); + vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); + vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvdd | + vdd->vp_data->vp_common->vpconfig_forceupdate | + vdd->vp_data->vp_common->vpconfig_initvoltage_mask); vpconfig |= ((target_vsel << - vdd->vp_reg.vpconfig_initvoltage_shift)); - vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig); + vdd->vp_data->vp_common->vpconfig_initvoltage_shift)); + vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); /* Trigger initVDD value copy to voltage processor */ - vpconfig |= vdd->vp_reg.vpconfig_initvdd; - vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig); + vpconfig |= vdd->vp_data->vp_common->vpconfig_initvdd; + vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); /* Force update of voltage */ - vpconfig |= vdd->vp_reg.vpconfig_forceupdate; - vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig); + vpconfig |= vdd->vp_data->vp_common->vpconfig_forceupdate; + vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); /* * Wait for TransactionDone. Typical latency is <200us. * Depends on SMPSWAITTIMEMIN/MAX and voltage change */ timeout = 0; - omap_test_timeout((vdd->read_reg(ocp_mod, prm_irqst_reg) & - vdd->vp_reg.tranxdone_status), - VP_TRANXDONE_TIMEOUT, timeout); + omap_test_timeout((vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) & + vdd->vp_data->prm_irqst_data->tranxdone_status), + VP_TRANXDONE_TIMEOUT, timeout); if (timeout >= VP_TRANXDONE_TIMEOUT) pr_err("%s: vdd_%s TRANXDONE timeout exceeded." "TRANXDONE never got set after the voltage update\n", @@ -704,11 +497,11 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, */ timeout = 0; while (timeout++ < VP_TRANXDONE_TIMEOUT) { - vdd->write_reg(vdd->vp_reg.tranxdone_status, - ocp_mod, prm_irqst_reg); - if (!(vdd->read_reg(ocp_mod, prm_irqst_reg) & - vdd->vp_reg.tranxdone_status)) - break; + vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status, + prm_irqst_ocp_mod_offs, prm_irqst_reg); + if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) & + vdd->vp_data->prm_irqst_data->tranxdone_status)) + break; udelay(1); } @@ -717,222 +510,95 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, "to clear the TRANXDONE status\n", __func__, vdd->voltdm.name); - vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig); + vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); /* Clear initVDD copy trigger bit */ - vpconfig &= ~vdd->vp_reg.vpconfig_initvdd;; - vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig); + vpconfig &= ~vdd->vp_data->vp_common->vpconfig_initvdd; + vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); /* Clear force bit */ - vpconfig &= ~vdd->vp_reg.vpconfig_forceupdate; - vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig); + vpconfig &= ~vdd->vp_data->vp_common->vpconfig_forceupdate; + vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); return 0; } -/* OMAP3 specific voltage init functions */ +static void __init omap3_vfsm_init(struct omap_vdd_info *vdd) +{ + /* + * Voltage Manager FSM parameters init + * XXX This data should be passed in from the board file + */ + vdd->write_reg(OMAP3_CLKSETUP, prm_mod_offs, OMAP3_PRM_CLKSETUP_OFFSET); + vdd->write_reg(OMAP3_VOLTOFFSET, prm_mod_offs, + OMAP3_PRM_VOLTOFFSET_OFFSET); + vdd->write_reg(OMAP3_VOLTSETUP2, prm_mod_offs, + OMAP3_PRM_VOLTSETUP2_OFFSET); +} -/* - * Intializes the voltage controller registers with the PMIC and board - * specific parameters and voltage setup times for OMAP3. - */ static void __init omap3_vc_init(struct omap_vdd_info *vdd) { - u32 vc_val; - u16 mod; - u8 on_vsel, onlp_vsel, ret_vsel, off_vsel; static bool is_initialized; + u8 on_vsel, onlp_vsel, ret_vsel, off_vsel; + u32 vc_val; - if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { - pr_err("%s: PMIC info requried to configure vc for" - "vdd_%s not populated.Hence cannot initialize vc\n", - __func__, vdd->voltdm.name); - return; - } - - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, vdd->voltdm.name); + if (is_initialized) return; - } - - mod = vdd->vc_reg.prm_mod; - - /* Set up the SMPS_SA(i2c slave address in VC */ - vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_sa_reg); - vc_val &= ~vdd->vc_reg.smps_sa_mask; - vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_reg.smps_sa_shift; - vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_sa_reg); - - /* Setup the VOLRA(pmic reg addr) in VC */ - vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_volra_reg); - vc_val &= ~vdd->vc_reg.smps_volra_mask; - vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_reg.smps_volra_shift; - vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_volra_reg); - - /*Configure the setup times */ - vc_val = vdd->read_reg(mod, vdd->vc_reg.voltsetup_reg); - vc_val &= ~vdd->vc_reg.voltsetup_mask; - vc_val |= vdd->pmic_info->volt_setup_time << - vdd->vc_reg.voltsetup_shift; - vdd->write_reg(vc_val, mod, vdd->vc_reg.voltsetup_reg); /* Set up the on, inactive, retention and off voltage */ on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt); onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt); ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt); off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt); - vc_val = ((on_vsel << vdd->vc_reg.cmd_on_shift) | - (onlp_vsel << vdd->vc_reg.cmd_onlp_shift) | - (ret_vsel << vdd->vc_reg.cmd_ret_shift) | - (off_vsel << vdd->vc_reg.cmd_off_shift)); - vdd->write_reg(vc_val, mod, vdd->vc_reg.cmdval_reg); - - if (is_initialized) - return; + vc_val = ((on_vsel << vdd->vc_data->vc_common->cmd_on_shift) | + (onlp_vsel << vdd->vc_data->vc_common->cmd_onlp_shift) | + (ret_vsel << vdd->vc_data->vc_common->cmd_ret_shift) | + (off_vsel << vdd->vc_data->vc_common->cmd_off_shift)); + vdd->write_reg(vc_val, prm_mod_offs, vdd->vc_data->cmdval_reg); - /* Generic VC parameters init */ - vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, mod, + /* + * Generic VC parameters init + * XXX This data should be abstracted out + */ + vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, prm_mod_offs, OMAP3_PRM_VC_CH_CONF_OFFSET); - vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, mod, + vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, prm_mod_offs, OMAP3_PRM_VC_I2C_CFG_OFFSET); - vdd->write_reg(OMAP3_CLKSETUP, mod, OMAP3_PRM_CLKSETUP_OFFSET); - vdd->write_reg(OMAP3_VOLTOFFSET, mod, OMAP3_PRM_VOLTOFFSET_OFFSET); - vdd->write_reg(OMAP3_VOLTSETUP2, mod, OMAP3_PRM_VOLTSETUP2_OFFSET); + + omap3_vfsm_init(vdd); + is_initialized = true; } -/* Sets up all the VDD related info for OMAP3 */ -static int __init omap3_vdd_data_configure(struct omap_vdd_info *vdd) -{ - struct clk *sys_ck; - u32 sys_clk_speed, timeout_val, waittime; - - if (!vdd->pmic_info) { - pr_err("%s: PMIC info requried to configure vdd_%s not" - "populated.Hence cannot initialize vdd_%s\n", - __func__, vdd->voltdm.name, vdd->voltdm.name); - return -EINVAL; - } - if (!strcmp(vdd->voltdm.name, "mpu")) { - if (cpu_is_omap3630()) - vdd->volt_data = omap36xx_vddmpu_volt_data; - else - vdd->volt_data = omap34xx_vddmpu_volt_data; +/* OMAP4 specific voltage init functions */ +static void __init omap4_vc_init(struct omap_vdd_info *vdd) +{ + static bool is_initialized; + u32 vc_val; - vdd->vp_reg.tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK; - vdd->vc_reg.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET; - vdd->vc_reg.smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT; - vdd->vc_reg.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK; - vdd->vc_reg.smps_volra_shift = OMAP3430_VOLRA0_SHIFT; - vdd->vc_reg.smps_volra_mask = OMAP3430_VOLRA0_MASK; - vdd->vc_reg.voltsetup_shift = OMAP3430_SETUP_TIME1_SHIFT; - vdd->vc_reg.voltsetup_mask = OMAP3430_SETUP_TIME1_MASK; - } else if (!strcmp(vdd->voltdm.name, "core")) { - if (cpu_is_omap3630()) - vdd->volt_data = omap36xx_vddcore_volt_data; - else - vdd->volt_data = omap34xx_vddcore_volt_data; + if (is_initialized) + return; - vdd->vp_reg.tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK; - vdd->vc_reg.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET; - vdd->vc_reg.smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT; - vdd->vc_reg.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK; - vdd->vc_reg.smps_volra_shift = OMAP3430_VOLRA1_SHIFT; - vdd->vc_reg.smps_volra_mask = OMAP3430_VOLRA1_MASK; - vdd->vc_reg.voltsetup_shift = OMAP3430_SETUP_TIME2_SHIFT; - vdd->vc_reg.voltsetup_mask = OMAP3430_SETUP_TIME2_MASK; - } else { - pr_warning("%s: vdd_%s does not exisit in OMAP3\n", - __func__, vdd->voltdm.name); - return -EINVAL; - } + /* TODO: Configure setup times and CMD_VAL values*/ /* - * Sys clk rate is require to calculate vp timeout value and - * smpswaittimemin and smpswaittimemax. + * Generic VC parameters init + * XXX This data should be abstracted out */ - sys_ck = clk_get(NULL, "sys_ck"); - if (IS_ERR(sys_ck)) { - pr_warning("%s: Could not get the sys clk to calculate" - "various vdd_%s params\n", __func__, vdd->voltdm.name); - return -EINVAL; - } - sys_clk_speed = clk_get_rate(sys_ck); - clk_put(sys_ck); - /* Divide to avoid overflow */ - sys_clk_speed /= 1000; - - /* Generic voltage parameters */ - vdd->curr_volt = 1200000; - vdd->ocp_mod = OCP_MOD; - vdd->prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET; - vdd->read_reg = omap3_voltage_read_reg; - vdd->write_reg = omap3_voltage_write_reg; - vdd->volt_scale = vp_forceupdate_scale_voltage; - vdd->vp_enabled = false; - - /* VC parameters */ - vdd->vc_reg.prm_mod = OMAP3430_GR_MOD; - vdd->vc_reg.smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET; - vdd->vc_reg.smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET; - vdd->vc_reg.bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET; - vdd->vc_reg.voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET; - vdd->vc_reg.data_shift = OMAP3430_DATA_SHIFT; - vdd->vc_reg.slaveaddr_shift = OMAP3430_SLAVEADDR_SHIFT; - vdd->vc_reg.regaddr_shift = OMAP3430_REGADDR_SHIFT; - vdd->vc_reg.valid = OMAP3430_VALID_MASK; - vdd->vc_reg.cmd_on_shift = OMAP3430_VC_CMD_ON_SHIFT; - vdd->vc_reg.cmd_on_mask = OMAP3430_VC_CMD_ON_MASK; - vdd->vc_reg.cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT; - vdd->vc_reg.cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT; - vdd->vc_reg.cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT; - - vdd->vp_reg.prm_mod = OMAP3430_GR_MOD; - - /* VPCONFIG bit fields */ - vdd->vp_reg.vpconfig_erroroffset = (vdd->pmic_info->vp_erroroffset << - OMAP3430_ERROROFFSET_SHIFT); - vdd->vp_reg.vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK; - vdd->vp_reg.vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT; - vdd->vp_reg.vpconfig_initvoltage_shift = OMAP3430_INITVOLTAGE_SHIFT; - vdd->vp_reg.vpconfig_initvoltage_mask = OMAP3430_INITVOLTAGE_MASK; - vdd->vp_reg.vpconfig_timeouten = OMAP3430_TIMEOUTEN_MASK; - vdd->vp_reg.vpconfig_initvdd = OMAP3430_INITVDD_MASK; - vdd->vp_reg.vpconfig_forceupdate = OMAP3430_FORCEUPDATE_MASK; - vdd->vp_reg.vpconfig_vpenable = OMAP3430_VPENABLE_MASK; - - /* VSTEPMIN VSTEPMAX bit fields */ - waittime = ((vdd->pmic_info->step_size / vdd->pmic_info->slew_rate) * - sys_clk_speed) / 1000; - vdd->vp_reg.vstepmin_smpswaittimemin = waittime; - vdd->vp_reg.vstepmax_smpswaittimemax = waittime; - vdd->vp_reg.vstepmin_stepmin = vdd->pmic_info->vp_vstepmin; - vdd->vp_reg.vstepmax_stepmax = vdd->pmic_info->vp_vstepmax; - vdd->vp_reg.vstepmin_smpswaittimemin_shift = - OMAP3430_SMPSWAITTIMEMIN_SHIFT; - vdd->vp_reg.vstepmax_smpswaittimemax_shift = - OMAP3430_SMPSWAITTIMEMAX_SHIFT; - vdd->vp_reg.vstepmin_stepmin_shift = OMAP3430_VSTEPMIN_SHIFT; - vdd->vp_reg.vstepmax_stepmax_shift = OMAP3430_VSTEPMAX_SHIFT; + vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK | + OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK | + OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK); + vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET); - /* VLIMITTO bit fields */ - timeout_val = (sys_clk_speed * vdd->pmic_info->vp_timeout_us) / 1000; - vdd->vp_reg.vlimitto_timeout = timeout_val; - vdd->vp_reg.vlimitto_vddmin = vdd->pmic_info->vp_vddmin; - vdd->vp_reg.vlimitto_vddmax = vdd->pmic_info->vp_vddmax; - vdd->vp_reg.vlimitto_vddmin_shift = OMAP3430_VDDMIN_SHIFT; - vdd->vp_reg.vlimitto_vddmax_shift = OMAP3430_VDDMAX_SHIFT; - vdd->vp_reg.vlimitto_timeout_shift = OMAP3430_TIMEOUT_SHIFT; + /* XXX These are magic numbers and do not belong! */ + vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT); + vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); - return 0; + is_initialized = true; } -/* OMAP4 specific voltage init functions */ -static void __init omap4_vc_init(struct omap_vdd_info *vdd) +static void __init omap_vc_init(struct omap_vdd_info *vdd) { u32 vc_val; - u16 mod; - static bool is_initialized; if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { pr_err("%s: PMIC info requried to configure vc for" @@ -947,173 +613,61 @@ static void __init omap4_vc_init(struct omap_vdd_info *vdd) return; } - mod = vdd->vc_reg.prm_mod; - /* Set up the SMPS_SA(i2c slave address in VC */ - vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_sa_reg); - vc_val &= ~vdd->vc_reg.smps_sa_mask; - vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_reg.smps_sa_shift; - vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_sa_reg); + vc_val = vdd->read_reg(prm_mod_offs, + vdd->vc_data->vc_common->smps_sa_reg); + vc_val &= ~vdd->vc_data->smps_sa_mask; + vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_data->smps_sa_shift; + vdd->write_reg(vc_val, prm_mod_offs, + vdd->vc_data->vc_common->smps_sa_reg); /* Setup the VOLRA(pmic reg addr) in VC */ - vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_volra_reg); - vc_val &= ~vdd->vc_reg.smps_volra_mask; - vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_reg.smps_volra_shift; - vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_volra_reg); - - /* TODO: Configure setup times and CMD_VAL values*/ - - if (is_initialized) - return; + vc_val = vdd->read_reg(prm_mod_offs, + vdd->vc_data->vc_common->smps_volra_reg); + vc_val &= ~vdd->vc_data->smps_volra_mask; + vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_data->smps_volra_shift; + vdd->write_reg(vc_val, prm_mod_offs, + vdd->vc_data->vc_common->smps_volra_reg); - /* Generic VC parameters init */ - vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK | - OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK | - OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK); - vdd->write_reg(vc_val, mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET); - - vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT); - vdd->write_reg(vc_val, mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); + /* Configure the setup times */ + vc_val = vdd->read_reg(prm_mod_offs, vdd->vfsm->voltsetup_reg); + vc_val &= ~vdd->vfsm->voltsetup_mask; + vc_val |= vdd->pmic_info->volt_setup_time << + vdd->vfsm->voltsetup_shift; + vdd->write_reg(vc_val, prm_mod_offs, vdd->vfsm->voltsetup_reg); - is_initialized = true; + if (cpu_is_omap34xx()) + omap3_vc_init(vdd); + else if (cpu_is_omap44xx()) + omap4_vc_init(vdd); } -/* Sets up all the VDD related info for OMAP4 */ -static int __init omap4_vdd_data_configure(struct omap_vdd_info *vdd) +static int __init omap_vdd_data_configure(struct omap_vdd_info *vdd) { - struct clk *sys_ck; - u32 sys_clk_speed, timeout_val, waittime; + int ret = -EINVAL; if (!vdd->pmic_info) { pr_err("%s: PMIC info requried to configure vdd_%s not" "populated.Hence cannot initialize vdd_%s\n", __func__, vdd->voltdm.name, vdd->voltdm.name); - return -EINVAL; + goto ovdc_out; } - if (!strcmp(vdd->voltdm.name, "mpu")) { - vdd->volt_data = omap44xx_vdd_mpu_volt_data; - vdd->vp_reg.tranxdone_status = - OMAP4430_VP_MPU_TRANXDONE_ST_MASK; - vdd->vc_reg.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET; - vdd->vc_reg.smps_sa_shift = - OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT; - vdd->vc_reg.smps_sa_mask = - OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK; - vdd->vc_reg.smps_volra_shift = OMAP4430_VOLRA_VDD_MPU_L_SHIFT; - vdd->vc_reg.smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK; - vdd->vc_reg.voltsetup_reg = - OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET; - vdd->prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET; - } else if (!strcmp(vdd->voltdm.name, "core")) { - vdd->volt_data = omap44xx_vdd_core_volt_data; - vdd->vp_reg.tranxdone_status = - OMAP4430_VP_CORE_TRANXDONE_ST_MASK; - vdd->vc_reg.cmdval_reg = - OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET; - vdd->vc_reg.smps_sa_shift = OMAP4430_SA_VDD_CORE_L_0_6_SHIFT; - vdd->vc_reg.smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK; - vdd->vc_reg.smps_volra_shift = OMAP4430_VOLRA_VDD_CORE_L_SHIFT; - vdd->vc_reg.smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK; - vdd->vc_reg.voltsetup_reg = - OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET; - vdd->prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET; - } else if (!strcmp(vdd->voltdm.name, "iva")) { - vdd->volt_data = omap44xx_vdd_iva_volt_data; - vdd->vp_reg.tranxdone_status = - OMAP4430_VP_IVA_TRANXDONE_ST_MASK; - vdd->vc_reg.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET; - vdd->vc_reg.smps_sa_shift = - OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT; - vdd->vc_reg.smps_sa_mask = - OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK; - vdd->vc_reg.smps_volra_shift = OMAP4430_VOLRA_VDD_IVA_L_SHIFT; - vdd->vc_reg.smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK; - vdd->vc_reg.voltsetup_reg = - OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET; - vdd->prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET; - } else { - pr_warning("%s: vdd_%s does not exisit in OMAP4\n", - __func__, vdd->voltdm.name); - return -EINVAL; - } + if (IS_ERR_VALUE(_config_common_vdd_data(vdd))) + goto ovdc_out; - /* - * Sys clk rate is require to calculate vp timeout value and - * smpswaittimemin and smpswaittimemax. - */ - sys_ck = clk_get(NULL, "sys_clkin_ck"); - if (IS_ERR(sys_ck)) { - pr_warning("%s: Could not get the sys clk to calculate" - "various vdd_%s params\n", __func__, vdd->voltdm.name); - return -EINVAL; + if (cpu_is_omap34xx()) { + vdd->read_reg = omap3_voltage_read_reg; + vdd->write_reg = omap3_voltage_write_reg; + ret = 0; + } else if (cpu_is_omap44xx()) { + vdd->read_reg = omap4_voltage_read_reg; + vdd->write_reg = omap4_voltage_write_reg; + ret = 0; } - sys_clk_speed = clk_get_rate(sys_ck); - clk_put(sys_ck); - /* Divide to avoid overflow */ - sys_clk_speed /= 1000; - /* Generic voltage parameters */ - vdd->curr_volt = 1200000; - vdd->ocp_mod = OMAP4430_PRM_OCP_SOCKET_INST; - vdd->read_reg = omap4_voltage_read_reg; - vdd->write_reg = omap4_voltage_write_reg; - vdd->volt_scale = vp_forceupdate_scale_voltage; - vdd->vp_enabled = false; - - /* VC parameters */ - vdd->vc_reg.prm_mod = OMAP4430_PRM_DEVICE_INST; - vdd->vc_reg.smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET; - vdd->vc_reg.smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET; - vdd->vc_reg.bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET; - vdd->vc_reg.data_shift = OMAP4430_DATA_SHIFT; - vdd->vc_reg.slaveaddr_shift = OMAP4430_SLAVEADDR_SHIFT; - vdd->vc_reg.regaddr_shift = OMAP4430_REGADDR_SHIFT; - vdd->vc_reg.valid = OMAP4430_VALID_MASK; - vdd->vc_reg.cmd_on_shift = OMAP4430_ON_SHIFT; - vdd->vc_reg.cmd_on_mask = OMAP4430_ON_MASK; - vdd->vc_reg.cmd_onlp_shift = OMAP4430_ONLP_SHIFT; - vdd->vc_reg.cmd_ret_shift = OMAP4430_RET_SHIFT; - vdd->vc_reg.cmd_off_shift = OMAP4430_OFF_SHIFT; - - vdd->vp_reg.prm_mod = OMAP4430_PRM_DEVICE_INST; - - /* VPCONFIG bit fields */ - vdd->vp_reg.vpconfig_erroroffset = (vdd->pmic_info->vp_erroroffset << - OMAP4430_ERROROFFSET_SHIFT); - vdd->vp_reg.vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK; - vdd->vp_reg.vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT; - vdd->vp_reg.vpconfig_initvoltage_shift = OMAP4430_INITVOLTAGE_SHIFT; - vdd->vp_reg.vpconfig_initvoltage_mask = OMAP4430_INITVOLTAGE_MASK; - vdd->vp_reg.vpconfig_timeouten = OMAP4430_TIMEOUTEN_MASK; - vdd->vp_reg.vpconfig_initvdd = OMAP4430_INITVDD_MASK; - vdd->vp_reg.vpconfig_forceupdate = OMAP4430_FORCEUPDATE_MASK; - vdd->vp_reg.vpconfig_vpenable = OMAP4430_VPENABLE_MASK; - - /* VSTEPMIN VSTEPMAX bit fields */ - waittime = ((vdd->pmic_info->step_size / vdd->pmic_info->slew_rate) * - sys_clk_speed) / 1000; - vdd->vp_reg.vstepmin_smpswaittimemin = waittime; - vdd->vp_reg.vstepmax_smpswaittimemax = waittime; - vdd->vp_reg.vstepmin_stepmin = vdd->pmic_info->vp_vstepmin; - vdd->vp_reg.vstepmax_stepmax = vdd->pmic_info->vp_vstepmax; - vdd->vp_reg.vstepmin_smpswaittimemin_shift = - OMAP4430_SMPSWAITTIMEMIN_SHIFT; - vdd->vp_reg.vstepmax_smpswaittimemax_shift = - OMAP4430_SMPSWAITTIMEMAX_SHIFT; - vdd->vp_reg.vstepmin_stepmin_shift = OMAP4430_VSTEPMIN_SHIFT; - vdd->vp_reg.vstepmax_stepmax_shift = OMAP4430_VSTEPMAX_SHIFT; - - /* VLIMITTO bit fields */ - timeout_val = (sys_clk_speed * vdd->pmic_info->vp_timeout_us) / 1000; - vdd->vp_reg.vlimitto_timeout = timeout_val; - vdd->vp_reg.vlimitto_vddmin = vdd->pmic_info->vp_vddmin; - vdd->vp_reg.vlimitto_vddmax = vdd->pmic_info->vp_vddmax; - vdd->vp_reg.vlimitto_vddmin_shift = OMAP4430_VDDMIN_SHIFT; - vdd->vp_reg.vlimitto_vddmax_shift = OMAP4430_VDDMAX_SHIFT; - vdd->vp_reg.vlimitto_timeout_shift = OMAP4430_TIMEOUT_SHIFT; - - return 0; +ovdc_out: + return ret; } /* Public functions */ @@ -1161,8 +715,7 @@ unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm) return 0; } - curr_vsel = vdd->read_reg(vdd->vp_reg.prm_mod, - vdd->vp_offs.voltage); + curr_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage); if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) { pr_warning("%s: PMIC function to convert vsel to voltage" @@ -1184,7 +737,6 @@ void omap_vp_enable(struct voltagedomain *voltdm) { struct omap_vdd_info *vdd; u32 vpconfig; - u16 mod; if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); @@ -1198,8 +750,6 @@ void omap_vp_enable(struct voltagedomain *voltdm) return; } - mod = vdd->vp_reg.prm_mod; - /* If VP is already enabled, do nothing. Return */ if (vdd->vp_enabled) return; @@ -1207,9 +757,9 @@ void omap_vp_enable(struct voltagedomain *voltdm) vp_latch_vsel(vdd); /* Enable VP */ - vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig); - vpconfig |= vdd->vp_reg.vpconfig_vpenable; - vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig); + vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); + vpconfig |= vdd->vp_data->vp_common->vpconfig_vpenable; + vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); vdd->vp_enabled = true; } @@ -1224,7 +774,6 @@ void omap_vp_disable(struct voltagedomain *voltdm) { struct omap_vdd_info *vdd; u32 vpconfig; - u16 mod; int timeout; if (!voltdm || IS_ERR(voltdm)) { @@ -1239,8 +788,6 @@ void omap_vp_disable(struct voltagedomain *voltdm) return; } - mod = vdd->vp_reg.prm_mod; - /* If VP is already disabled, do nothing. Return */ if (!vdd->vp_enabled) { pr_warning("%s: Trying to disable VP for vdd_%s when" @@ -1249,14 +796,14 @@ void omap_vp_disable(struct voltagedomain *voltdm) } /* Disable VP */ - vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig); - vpconfig &= ~vdd->vp_reg.vpconfig_vpenable; - vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig); + vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); + vpconfig &= ~vdd->vp_data->vp_common->vpconfig_vpenable; + vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); /* * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us */ - omap_test_timeout((vdd->read_reg(mod, vdd->vp_offs.vstatus)), + omap_test_timeout((vdd->read_reg(prm_mod_offs, vdd->vp_data->vstatus)), VP_IDLE_TIMEOUT, timeout); if (timeout >= VP_IDLE_TIMEOUT) @@ -1509,8 +1056,8 @@ struct voltagedomain *omap_voltage_domain_lookup(char *name) } for (i = 0; i < nr_scalable_vdd; i++) { - if (!(strcmp(name, vdd_info[i].voltdm.name))) - return &vdd_info[i].voltdm; + if (!(strcmp(name, vdd_info[i]->voltdm.name))) + return &vdd_info[i]->voltdm; } return ERR_PTR(-EINVAL); @@ -1538,35 +1085,24 @@ int __init omap_voltage_late_init(void) pr_err("%s: Unable to create voltage debugfs main dir\n", __func__); for (i = 0; i < nr_scalable_vdd; i++) { - if (vdd_data_configure(&vdd_info[i])) + if (omap_vdd_data_configure(vdd_info[i])) continue; - vc_init(&vdd_info[i]); - vp_init(&vdd_info[i]); - vdd_debugfs_init(&vdd_info[i]); + omap_vc_init(vdd_info[i]); + vp_init(vdd_info[i]); + vdd_debugfs_init(vdd_info[i]); } return 0; } -/** - * omap_voltage_early_init()- Volatage driver early init - */ -static int __init omap_voltage_early_init(void) +/* XXX document */ +int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_ocp_mod, + struct omap_vdd_info *omap_vdd_array[], + u8 omap_vdd_count) { - if (cpu_is_omap34xx()) { - vdd_info = omap3_vdd_info; - nr_scalable_vdd = OMAP3_NR_SCALABLE_VDD; - vc_init = omap3_vc_init; - vdd_data_configure = omap3_vdd_data_configure; - } else if (cpu_is_omap44xx()) { - vdd_info = omap4_vdd_info; - nr_scalable_vdd = OMAP4_NR_SCALABLE_VDD; - vc_init = omap4_vc_init; - vdd_data_configure = omap4_vdd_data_configure; - } else { - pr_warning("%s: voltage driver support not added\n", __func__); - } - + prm_mod_offs = prm_mod; + prm_irqst_ocp_mod_offs = prm_irqst_ocp_mod; + vdd_info = omap_vdd_array; + nr_scalable_vdd = omap_vdd_count; return 0; } -core_initcall(omap_voltage_early_init); diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/mach-omap2/voltage.h index 5bd204e55c3..e9f5408244e 100644 --- a/arch/arm/plat-omap/include/plat/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -16,6 +16,10 @@ #include <linux/err.h> +#include "vc.h" +#include "vp.h" + +/* XXX document */ #define VOLTSCALE_VPFORCEUPDATE 1 #define VOLTSCALE_VCBYPASS 2 @@ -27,36 +31,22 @@ #define OMAP3_VOLTOFFSET 0xff #define OMAP3_VOLTSETUP2 0xff -/* Voltage value defines */ -#define OMAP3430_VDD_MPU_OPP1_UV 975000 -#define OMAP3430_VDD_MPU_OPP2_UV 1075000 -#define OMAP3430_VDD_MPU_OPP3_UV 1200000 -#define OMAP3430_VDD_MPU_OPP4_UV 1270000 -#define OMAP3430_VDD_MPU_OPP5_UV 1350000 - -#define OMAP3430_VDD_CORE_OPP1_UV 975000 -#define OMAP3430_VDD_CORE_OPP2_UV 1050000 -#define OMAP3430_VDD_CORE_OPP3_UV 1150000 - -#define OMAP3630_VDD_MPU_OPP50_UV 1012500 -#define OMAP3630_VDD_MPU_OPP100_UV 1200000 -#define OMAP3630_VDD_MPU_OPP120_UV 1325000 -#define OMAP3630_VDD_MPU_OPP1G_UV 1375000 - -#define OMAP3630_VDD_CORE_OPP50_UV 1000000 -#define OMAP3630_VDD_CORE_OPP100_UV 1200000 - -#define OMAP4430_VDD_MPU_OPP50_UV 930000 -#define OMAP4430_VDD_MPU_OPP100_UV 1100000 -#define OMAP4430_VDD_MPU_OPPTURBO_UV 1260000 -#define OMAP4430_VDD_MPU_OPPNITRO_UV 1350000 - -#define OMAP4430_VDD_IVA_OPP50_UV 930000 -#define OMAP4430_VDD_IVA_OPP100_UV 1100000 -#define OMAP4430_VDD_IVA_OPPTURBO_UV 1260000 - -#define OMAP4430_VDD_CORE_OPP50_UV 930000 -#define OMAP4430_VDD_CORE_OPP100_UV 1100000 +/** + * struct omap_vfsm_instance_data - per-voltage manager FSM register/bitfield + * data + * @voltsetup_mask: SETUP_TIME* bitmask in the PRM_VOLTSETUP* register + * @voltsetup_reg: register offset of PRM_VOLTSETUP from PRM base + * @voltsetup_shift: SETUP_TIME* field shift in the PRM_VOLTSETUP* register + * + * XXX What about VOLTOFFSET/VOLTCTRL? + * XXX It is not necessary to have both a _mask and a _shift for the same + * bitfield - remove one! + */ +struct omap_vfsm_instance_data { + u32 voltsetup_mask; + u8 voltsetup_reg; + u8 voltsetup_shift; +}; /** * struct voltagedomain - omap voltage domain global structure. @@ -113,6 +103,42 @@ struct omap_volt_pmic_info { u8 (*uv_to_vsel) (unsigned long uV); }; +/** + * omap_vdd_info - Per Voltage Domain info + * + * @volt_data : voltage table having the distinct voltages supported + * by the domain and other associated per voltage data. + * @pmic_info : pmic specific parameters which should be populted by + * the pmic drivers. + * @vp_data : the register values, shifts, masks for various + * vp registers + * @vp_rt_data : VP data derived at runtime, not predefined + * @vc_data : structure containing various various vc registers, + * shifts, masks etc. + * @vfsm : voltage manager FSM data + * @voltdm : pointer to the voltage domain structure + * @debug_dir : debug directory for this voltage domain. + * @curr_volt : current voltage for this vdd. + * @vp_enabled : flag to keep track of whether vp is enabled or not + * @volt_scale : API to scale the voltage of the vdd. + */ +struct omap_vdd_info { + struct omap_volt_data *volt_data; + struct omap_volt_pmic_info *pmic_info; + struct omap_vp_instance_data *vp_data; + struct omap_vp_runtime_data vp_rt_data; + struct omap_vc_instance_data *vc_data; + const struct omap_vfsm_instance_data *vfsm; + struct voltagedomain voltdm; + struct dentry *debug_dir; + u32 curr_volt; + bool vp_enabled; + u32 (*read_reg) (u16 mod, u8 offset); + void (*write_reg) (u32 val, u16 mod, u8 offset); + int (*volt_scale) (struct omap_vdd_info *vdd, + unsigned long target_volt); +}; + unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm); void omap_vp_enable(struct voltagedomain *voltdm); void omap_vp_disable(struct voltagedomain *voltdm); @@ -125,6 +151,9 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, unsigned long volt); unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm); struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm); +int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_mod, + struct omap_vdd_info *omap_vdd_array[], + u8 omap_vdd_count); #ifdef CONFIG_PM int omap_voltage_register_pmic(struct voltagedomain *voltdm, struct omap_volt_pmic_info *pmic_info); diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c new file mode 100644 index 00000000000..def230fd2fd --- /dev/null +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -0,0 +1,95 @@ +/* + * OMAP3 voltage domain data + * + * Copyright (C) 2007, 2010 Texas Instruments, Inc. + * Rajendra Nayak <rnayak@ti.com> + * Lesly A M <x0080970@ti.com> + * Thara Gopinath <thara@ti.com> + * + * Copyright (C) 2008, 2011 Nokia Corporation + * Kalle Jokiniemi + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/init.h> + +#include <plat/common.h> +#include <plat/cpu.h> + +#include "prm-regbits-34xx.h" +#include "omap_opp_data.h" +#include "voltage.h" +#include "vc.h" +#include "vp.h" + +/* + * VDD data + */ + +static const struct omap_vfsm_instance_data omap3_vdd1_vfsm_data = { + .voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET, + .voltsetup_shift = OMAP3430_SETUP_TIME1_SHIFT, + .voltsetup_mask = OMAP3430_SETUP_TIME1_MASK, +}; + +static struct omap_vdd_info omap3_vdd1_info = { + .vp_data = &omap3_vp1_data, + .vc_data = &omap3_vc1_data, + .vfsm = &omap3_vdd1_vfsm_data, + .voltdm = { + .name = "mpu", + }, +}; + +static const struct omap_vfsm_instance_data omap3_vdd2_vfsm_data = { + .voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET, + .voltsetup_shift = OMAP3430_SETUP_TIME2_SHIFT, + .voltsetup_mask = OMAP3430_SETUP_TIME2_MASK, +}; + +static struct omap_vdd_info omap3_vdd2_info = { + .vp_data = &omap3_vp2_data, + .vc_data = &omap3_vc2_data, + .vfsm = &omap3_vdd2_vfsm_data, + .voltdm = { + .name = "core", + }, +}; + +/* OMAP3 VDD structures */ +static struct omap_vdd_info *omap3_vdd_info[] = { + &omap3_vdd1_info, + &omap3_vdd2_info, +}; + +/* OMAP3 specific voltage init functions */ +static int __init omap3xxx_voltage_early_init(void) +{ + s16 prm_mod = OMAP3430_GR_MOD; + s16 prm_irqst_ocp_mod = OCP_MOD; + + if (!cpu_is_omap34xx()) + return 0; + + /* + * XXX Will depend on the process, validation, and binning + * for the currently-running IC + */ + if (cpu_is_omap3630()) { + omap3_vdd1_info.volt_data = omap36xx_vddmpu_volt_data; + omap3_vdd2_info.volt_data = omap36xx_vddcore_volt_data; + } else { + omap3_vdd1_info.volt_data = omap34xx_vddmpu_volt_data; + omap3_vdd2_info.volt_data = omap34xx_vddcore_volt_data; + } + + return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod, + omap3_vdd_info, + ARRAY_SIZE(omap3_vdd_info)); +}; +core_initcall(omap3xxx_voltage_early_init); diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c new file mode 100644 index 00000000000..cb64996de0e --- /dev/null +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -0,0 +1,102 @@ +/* + * OMAP3/OMAP4 Voltage Management Routines + * + * Author: Thara Gopinath <thara@ti.com> + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Rajendra Nayak <rnayak@ti.com> + * Lesly A M <x0080970@ti.com> + * + * Copyright (C) 2008 Nokia Corporation + * Kalle Jokiniemi + * + * Copyright (C) 2010 Texas Instruments, Inc. + * Thara Gopinath <thara@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/init.h> + +#include <plat/common.h> + +#include "prm-regbits-44xx.h" +#include "prm44xx.h" +#include "prcm44xx.h" +#include "prminst44xx.h" +#include "voltage.h" +#include "omap_opp_data.h" +#include "vc.h" +#include "vp.h" + +static const struct omap_vfsm_instance_data omap4_vdd_mpu_vfsm_data = { + .voltsetup_reg = OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET, +}; + +static struct omap_vdd_info omap4_vdd_mpu_info = { + .vp_data = &omap4_vp_mpu_data, + .vc_data = &omap4_vc_mpu_data, + .vfsm = &omap4_vdd_mpu_vfsm_data, + .voltdm = { + .name = "mpu", + }, +}; + +static const struct omap_vfsm_instance_data omap4_vdd_iva_vfsm_data = { + .voltsetup_reg = OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET, +}; + +static struct omap_vdd_info omap4_vdd_iva_info = { + .vp_data = &omap4_vp_iva_data, + .vc_data = &omap4_vc_iva_data, + .vfsm = &omap4_vdd_iva_vfsm_data, + .voltdm = { + .name = "iva", + }, +}; + +static const struct omap_vfsm_instance_data omap4_vdd_core_vfsm_data = { + .voltsetup_reg = OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET, +}; + +static struct omap_vdd_info omap4_vdd_core_info = { + .vp_data = &omap4_vp_core_data, + .vc_data = &omap4_vc_core_data, + .vfsm = &omap4_vdd_core_vfsm_data, + .voltdm = { + .name = "core", + }, +}; + +/* OMAP4 VDD structures */ +static struct omap_vdd_info *omap4_vdd_info[] = { + &omap4_vdd_mpu_info, + &omap4_vdd_iva_info, + &omap4_vdd_core_info, +}; + +/* OMAP4 specific voltage init functions */ +static int __init omap44xx_voltage_early_init(void) +{ + s16 prm_mod = OMAP4430_PRM_DEVICE_INST; + s16 prm_irqst_ocp_mod = OMAP4430_PRM_OCP_SOCKET_INST; + + if (!cpu_is_omap44xx()) + return 0; + + /* + * XXX Will depend on the process, validation, and binning + * for the currently-running IC + */ + omap4_vdd_mpu_info.volt_data = omap44xx_vdd_mpu_volt_data; + omap4_vdd_iva_info.volt_data = omap44xx_vdd_iva_volt_data; + omap4_vdd_core_info.volt_data = omap44xx_vdd_core_volt_data; + + return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod, + omap4_vdd_info, + ARRAY_SIZE(omap4_vdd_info)); +}; +core_initcall(omap44xx_voltage_early_init); diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h new file mode 100644 index 00000000000..7ce134f7de7 --- /dev/null +++ b/arch/arm/mach-omap2/vp.h @@ -0,0 +1,143 @@ +/* + * OMAP3/4 Voltage Processor (VP) structure and macro definitions + * + * Copyright (C) 2007, 2010 Texas Instruments, Inc. + * Rajendra Nayak <rnayak@ti.com> + * Lesly A M <x0080970@ti.com> + * Thara Gopinath <thara@ti.com> + * + * Copyright (C) 2008, 2011 Nokia Corporation + * Kalle Jokiniemi + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ +#ifndef __ARCH_ARM_MACH_OMAP2_VP_H +#define __ARCH_ARM_MACH_OMAP2_VP_H + +#include <linux/kernel.h> + +/* XXX document */ +#define VP_IDLE_TIMEOUT 200 +#define VP_TRANXDONE_TIMEOUT 300 + + +/** + * struct omap_vp_common_data - register data common to all VDDs + * @vpconfig_errorgain_mask: ERRORGAIN bitmask in the PRM_VP*_CONFIG reg + * @vpconfig_initvoltage_mask: INITVOLTAGE bitmask in the PRM_VP*_CONFIG reg + * @vpconfig_timeouten_mask: TIMEOUT bitmask in the PRM_VP*_CONFIG reg + * @vpconfig_initvdd: INITVDD bitmask in the PRM_VP*_CONFIG reg + * @vpconfig_forceupdate: FORCEUPDATE bitmask in the PRM_VP*_CONFIG reg + * @vpconfig_vpenable: VPENABLE bitmask in the PRM_VP*_CONFIG reg + * @vpconfig_erroroffset_shift: ERROROFFSET field shift in PRM_VP*_CONFIG reg + * @vpconfig_errorgain_shift: ERRORGAIN field shift in PRM_VP*_CONFIG reg + * @vpconfig_initvoltage_shift: INITVOLTAGE field shift in PRM_VP*_CONFIG reg + * @vpconfig_stepmin_shift: VSTEPMIN field shift in the PRM_VP*_VSTEPMIN reg + * @vpconfig_smpswaittimemin_shift: SMPSWAITTIMEMIN field shift in PRM_VP*_VSTEPMIN reg + * @vpconfig_stepmax_shift: VSTEPMAX field shift in the PRM_VP*_VSTEPMAX reg + * @vpconfig_smpswaittimemax_shift: SMPSWAITTIMEMAX field shift in PRM_VP*_VSTEPMAX reg + * @vpconfig_vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg + * @vpconfig_vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg + * @vpconfig_vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg + * + * XXX It it not necessary to have both a mask and a shift for the same + * bitfield - remove one + * XXX Many of these fields are wrongly named -- e.g., vpconfig_smps* -- fix! + */ +struct omap_vp_common_data { + u32 vpconfig_errorgain_mask; + u32 vpconfig_initvoltage_mask; + u32 vpconfig_timeouten; + u32 vpconfig_initvdd; + u32 vpconfig_forceupdate; + u32 vpconfig_vpenable; + u8 vpconfig_erroroffset_shift; + u8 vpconfig_errorgain_shift; + u8 vpconfig_initvoltage_shift; + u8 vstepmin_stepmin_shift; + u8 vstepmin_smpswaittimemin_shift; + u8 vstepmax_stepmax_shift; + u8 vstepmax_smpswaittimemax_shift; + u8 vlimitto_vddmin_shift; + u8 vlimitto_vddmax_shift; + u8 vlimitto_timeout_shift; +}; + +/** + * struct omap_vp_prm_irqst_data - PRM_IRQSTATUS_MPU.VP_TRANXDONE_ST data + * @prm_irqst_reg: reg offset for PRM_IRQSTATUS_MPU from top of PRM + * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg + * + * XXX prm_irqst_reg does not belong here + * XXX Note that on OMAP3, VP_TRANXDONE interrupt may not work due to a + * hardware bug + * XXX This structure is probably not needed + */ +struct omap_vp_prm_irqst_data { + u8 prm_irqst_reg; + u32 tranxdone_status; +}; + +/** + * struct omap_vp_instance_data - VP register offsets (per-VDD) + * @vp_common: pointer to struct omap_vp_common_data * for this SoC + * @prm_irqst_data: pointer to struct omap_vp_prm_irqst_data for this VDD + * @vpconfig: PRM_VP*_CONFIG reg offset from PRM start + * @vstepmin: PRM_VP*_VSTEPMIN reg offset from PRM start + * @vlimitto: PRM_VP*_VLIMITTO reg offset from PRM start + * @vstatus: PRM_VP*_VSTATUS reg offset from PRM start + * @voltage: PRM_VP*_VOLTAGE reg offset from PRM start + * + * XXX vp_common is probably not needed since it is per-SoC + */ +struct omap_vp_instance_data { + const struct omap_vp_common_data *vp_common; + const struct omap_vp_prm_irqst_data *prm_irqst_data; + u8 vpconfig; + u8 vstepmin; + u8 vstepmax; + u8 vlimitto; + u8 vstatus; + u8 voltage; +}; + +/** + * struct omap_vp_runtime_data - VP data populated at runtime by code + * @vpconfig_erroroffset: value of ERROROFFSET bitfield in PRM_VP*_CONFIG + * @vpconfig_errorgain: value of ERRORGAIN bitfield in PRM_VP*_CONFIG + * @vstepmin_smpswaittimemin: value of SMPSWAITTIMEMIN bitfield in PRM_VP*_VSTEPMIN + * @vstepmax_smpswaittimemax: value of SMPSWAITTIMEMAX bitfield in PRM_VP*_VSTEPMAX + * @vlimitto_timeout: value of TIMEOUT bitfield in PRM_VP*_VLIMITTO + * @vstepmin_stepmin: value of VSTEPMIN bitfield in PRM_VP*_VSTEPMIN + * @vstepmax_stepmax: value of VSTEPMAX bitfield in PRM_VP*_VSTEPMAX + * @vlimitto_vddmin: value of VDDMIN bitfield in PRM_VP*_VLIMITTO + * @vlimitto_vddmax: value of VDDMAX bitfield in PRM_VP*_VLIMITTO + * + * XXX Is this structure really needed? Why not just program the + * device directly? They are in PRM space, therefore in the WKUP + * powerdomain, so register contents should not be lost in off-mode. + * XXX Some of these fields are incorrectly named, e.g., vstep* + */ +struct omap_vp_runtime_data { + u32 vpconfig_erroroffset; + u16 vpconfig_errorgain; + u16 vstepmin_smpswaittimemin; + u16 vstepmax_smpswaittimemax; + u16 vlimitto_timeout; + u8 vstepmin_stepmin; + u8 vstepmax_stepmax; + u8 vlimitto_vddmin; + u8 vlimitto_vddmax; +}; + +extern struct omap_vp_instance_data omap3_vp1_data; +extern struct omap_vp_instance_data omap3_vp2_data; + +extern struct omap_vp_instance_data omap4_vp_mpu_data; +extern struct omap_vp_instance_data omap4_vp_iva_data; +extern struct omap_vp_instance_data omap4_vp_core_data; + +#endif diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c new file mode 100644 index 00000000000..645217094e5 --- /dev/null +++ b/arch/arm/mach-omap2/vp3xxx_data.c @@ -0,0 +1,82 @@ +/* + * OMAP3 Voltage Processor (VP) data + * + * Copyright (C) 2007, 2010 Texas Instruments, Inc. + * Rajendra Nayak <rnayak@ti.com> + * Lesly A M <x0080970@ti.com> + * Thara Gopinath <thara@ti.com> + * + * Copyright (C) 2008, 2011 Nokia Corporation + * Kalle Jokiniemi + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/err.h> +#include <linux/init.h> + +#include <plat/common.h> + +#include "prm-regbits-34xx.h" +#include "voltage.h" + +#include "vp.h" + +/* + * VP data common to 34xx/36xx chips + * XXX This stuff presumably belongs in the vp3xxx.c or vp.c file. + */ +static const struct omap_vp_common_data omap3_vp_common = { + .vpconfig_erroroffset_shift = OMAP3430_ERROROFFSET_SHIFT, + .vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK, + .vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT, + .vpconfig_initvoltage_shift = OMAP3430_INITVOLTAGE_SHIFT, + .vpconfig_initvoltage_mask = OMAP3430_INITVOLTAGE_MASK, + .vpconfig_timeouten = OMAP3430_TIMEOUTEN_MASK, + .vpconfig_initvdd = OMAP3430_INITVDD_MASK, + .vpconfig_forceupdate = OMAP3430_FORCEUPDATE_MASK, + .vpconfig_vpenable = OMAP3430_VPENABLE_MASK, + .vstepmin_smpswaittimemin_shift = OMAP3430_SMPSWAITTIMEMIN_SHIFT, + .vstepmax_smpswaittimemax_shift = OMAP3430_SMPSWAITTIMEMAX_SHIFT, + .vstepmin_stepmin_shift = OMAP3430_VSTEPMIN_SHIFT, + .vstepmax_stepmax_shift = OMAP3430_VSTEPMAX_SHIFT, + .vlimitto_vddmin_shift = OMAP3430_VDDMIN_SHIFT, + .vlimitto_vddmax_shift = OMAP3430_VDDMAX_SHIFT, + .vlimitto_timeout_shift = OMAP3430_TIMEOUT_SHIFT, +}; + +static const struct omap_vp_prm_irqst_data omap3_vp1_prm_irqst_data = { + .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, + .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK, +}; + +struct omap_vp_instance_data omap3_vp1_data = { + .vp_common = &omap3_vp_common, + .vpconfig = OMAP3_PRM_VP1_CONFIG_OFFSET, + .vstepmin = OMAP3_PRM_VP1_VSTEPMIN_OFFSET, + .vstepmax = OMAP3_PRM_VP1_VSTEPMAX_OFFSET, + .vlimitto = OMAP3_PRM_VP1_VLIMITTO_OFFSET, + .vstatus = OMAP3_PRM_VP1_STATUS_OFFSET, + .voltage = OMAP3_PRM_VP1_VOLTAGE_OFFSET, + .prm_irqst_data = &omap3_vp1_prm_irqst_data, +}; + +static const struct omap_vp_prm_irqst_data omap3_vp2_prm_irqst_data = { + .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, + .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK, +}; + +struct omap_vp_instance_data omap3_vp2_data = { + .vp_common = &omap3_vp_common, + .vpconfig = OMAP3_PRM_VP2_CONFIG_OFFSET, + .vstepmin = OMAP3_PRM_VP2_VSTEPMIN_OFFSET, + .vstepmax = OMAP3_PRM_VP2_VSTEPMAX_OFFSET, + .vlimitto = OMAP3_PRM_VP2_VLIMITTO_OFFSET, + .vstatus = OMAP3_PRM_VP2_STATUS_OFFSET, + .voltage = OMAP3_PRM_VP2_VOLTAGE_OFFSET, + .prm_irqst_data = &omap3_vp2_prm_irqst_data, +}; diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c new file mode 100644 index 00000000000..65d1ad63800 --- /dev/null +++ b/arch/arm/mach-omap2/vp44xx_data.c @@ -0,0 +1,100 @@ +/* + * OMAP3 Voltage Processor (VP) data + * + * Copyright (C) 2007, 2010 Texas Instruments, Inc. + * Rajendra Nayak <rnayak@ti.com> + * Lesly A M <x0080970@ti.com> + * Thara Gopinath <thara@ti.com> + * + * Copyright (C) 2008, 2011 Nokia Corporation + * Kalle Jokiniemi + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/err.h> +#include <linux/init.h> + +#include <plat/common.h> + +#include "prm44xx.h" +#include "prm-regbits-44xx.h" +#include "voltage.h" + +#include "vp.h" + +/* + * VP data common to 44xx chips + * XXX This stuff presumably belongs in the vp44xx.c or vp.c file. + */ +static const struct omap_vp_common_data omap4_vp_common = { + .vpconfig_erroroffset_shift = OMAP4430_ERROROFFSET_SHIFT, + .vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK, + .vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT, + .vpconfig_initvoltage_shift = OMAP4430_INITVOLTAGE_SHIFT, + .vpconfig_initvoltage_mask = OMAP4430_INITVOLTAGE_MASK, + .vpconfig_timeouten = OMAP4430_TIMEOUTEN_MASK, + .vpconfig_initvdd = OMAP4430_INITVDD_MASK, + .vpconfig_forceupdate = OMAP4430_FORCEUPDATE_MASK, + .vpconfig_vpenable = OMAP4430_VPENABLE_MASK, + .vstepmin_smpswaittimemin_shift = OMAP4430_SMPSWAITTIMEMIN_SHIFT, + .vstepmax_smpswaittimemax_shift = OMAP4430_SMPSWAITTIMEMAX_SHIFT, + .vstepmin_stepmin_shift = OMAP4430_VSTEPMIN_SHIFT, + .vstepmax_stepmax_shift = OMAP4430_VSTEPMAX_SHIFT, + .vlimitto_vddmin_shift = OMAP4430_VDDMIN_SHIFT, + .vlimitto_vddmax_shift = OMAP4430_VDDMAX_SHIFT, + .vlimitto_timeout_shift = OMAP4430_TIMEOUT_SHIFT, +}; + +static const struct omap_vp_prm_irqst_data omap4_vp_mpu_prm_irqst_data = { + .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET, + .tranxdone_status = OMAP4430_VP_MPU_TRANXDONE_ST_MASK, +}; + +struct omap_vp_instance_data omap4_vp_mpu_data = { + .vp_common = &omap4_vp_common, + .vpconfig = OMAP4_PRM_VP_MPU_CONFIG_OFFSET, + .vstepmin = OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET, + .vstepmax = OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET, + .vlimitto = OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET, + .vstatus = OMAP4_PRM_VP_MPU_STATUS_OFFSET, + .voltage = OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET, + .prm_irqst_data = &omap4_vp_mpu_prm_irqst_data, +}; + +static const struct omap_vp_prm_irqst_data omap4_vp_iva_prm_irqst_data = { + .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, + .tranxdone_status = OMAP4430_VP_IVA_TRANXDONE_ST_MASK, +}; + +struct omap_vp_instance_data omap4_vp_iva_data = { + .vp_common = &omap4_vp_common, + .vpconfig = OMAP4_PRM_VP_IVA_CONFIG_OFFSET, + .vstepmin = OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET, + .vstepmax = OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET, + .vlimitto = OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET, + .vstatus = OMAP4_PRM_VP_IVA_STATUS_OFFSET, + .voltage = OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET, + .prm_irqst_data = &omap4_vp_iva_prm_irqst_data, +}; + +static const struct omap_vp_prm_irqst_data omap4_vp_core_prm_irqst_data = { + .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, + .tranxdone_status = OMAP4430_VP_CORE_TRANXDONE_ST_MASK, +}; + +struct omap_vp_instance_data omap4_vp_core_data = { + .vp_common = &omap4_vp_common, + .vpconfig = OMAP4_PRM_VP_CORE_CONFIG_OFFSET, + .vstepmin = OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET, + .vstepmax = OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET, + .vlimitto = OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET, + .vstatus = OMAP4_PRM_VP_CORE_STATUS_OFFSET, + .voltage = OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET, + .prm_irqst_data = &omap4_vp_core_prm_irqst_data, +}; + diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index fca0cbce465..23c77cd4abe 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -35,7 +35,6 @@ #include <linux/ioport.h> #include <linux/spinlock.h> #include <plat/cpu.h> -#include <plat/voltage.h> struct omap_device; |