diff options
Diffstat (limited to 'arch')
202 files changed, 1768 insertions, 2474 deletions
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index f449efc9825..66389c1c6f6 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -52,10 +52,11 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <29 30 31>; }; ramc0: ramc@ffffea00 { @@ -81,25 +82,25 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; tcb0: timer@fffa0000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa0000 0x100>; - interrupts = <17 4 18 4 19 4>; + interrupts = <17 4 0 18 4 0 19 4 0>; }; tcb1: timer@fffdc000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffdc000 0x100>; - interrupts = <26 4 27 4 28 4>; + interrupts = <26 4 0 27 4 0 28 4 0>; }; pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -108,7 +109,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -117,7 +118,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -126,14 +127,14 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@fffb0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb0000 0x200>; - interrupts = <6 4>; + interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -142,7 +143,7 @@ usart1: serial@fffb4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb4000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -151,7 +152,7 @@ usart2: serial@fffb8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb8000 0x200>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -160,7 +161,7 @@ usart3: serial@fffd0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd0000 0x200>; - interrupts = <23 4>; + interrupts = <23 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -169,7 +170,7 @@ usart4: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; - interrupts = <24 4>; + interrupts = <24 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -178,7 +179,7 @@ usart5: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; - interrupts = <25 4>; + interrupts = <25 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -187,21 +188,21 @@ macb0: ethernet@fffc4000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; - interrupts = <21 4>; + interrupts = <21 4 3>; status = "disabled"; }; usb1: gadget@fffa4000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffa4000 0x4000>; - interrupts = <10 4>; + interrupts = <10 4 2>; status = "disabled"; }; adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; - interrupts = <5 4>; + interrupts = <5 4 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xf>; atmel,adc-vref = <3300>; @@ -253,7 +254,7 @@ usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; - interrupts = <20 4>; + interrupts = <20 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 0209913a65a..b460d6ce9eb 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -48,10 +48,11 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <30 31>; }; pmc: pmc@fffffc00 { @@ -68,13 +69,13 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <19 4>; + interrupts = <19 4 0>; }; rstc@fffffd00 { @@ -90,7 +91,7 @@ pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -99,7 +100,7 @@ pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -108,7 +109,7 @@ pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -117,7 +118,7 @@ pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -126,7 +127,7 @@ pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -135,14 +136,14 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -151,7 +152,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -160,7 +161,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4>; + interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -169,14 +170,14 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <21 4>; + interrupts = <21 4 3>; status = "disabled"; }; usb1: gadget@fff78000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfff78000 0x4000>; - interrupts = <24 4>; + interrupts = <24 4 2>; status = "disabled"; }; }; @@ -200,7 +201,7 @@ usb0: ohci@00a00000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; - interrupts = <29 4>; + interrupts = <29 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 7dbccaf199f..bafa8806fc1 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -53,10 +53,11 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; }; ramc0: ramc@ffffe400 { @@ -78,7 +79,7 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; @@ -90,25 +91,25 @@ tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <18 4>; + interrupts = <18 4 0>; }; tcb1: timer@fffd4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffd4000 0x100>; - interrupts = <18 4>; + interrupts = <18 4 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <21 4>; + interrupts = <21 4 0>; }; pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -117,7 +118,7 @@ pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -126,7 +127,7 @@ pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -135,7 +136,7 @@ pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <5 4>; + interrupts = <5 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -144,7 +145,7 @@ pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <5 4>; + interrupts = <5 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -153,14 +154,14 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -169,7 +170,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -178,7 +179,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4>; + interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -187,7 +188,7 @@ usart3: serial@fff98000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff98000 0x200>; - interrupts = <10 4>; + interrupts = <10 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -196,14 +197,14 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <25 4>; + interrupts = <25 4 3>; status = "disabled"; }; adc0: adc@fffb0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffb0000 0x100>; - interrupts = <20 4>; + interrupts = <20 4 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; @@ -257,14 +258,14 @@ usb0: ohci@00700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; usb1: ehci@00800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index cb84de791b5..bfac0dfc332 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -50,7 +50,7 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; @@ -74,7 +74,7 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; shdwc@fffffe10 { @@ -85,25 +85,25 @@ tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4>; + interrupts = <20 4 0>; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -112,7 +112,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -121,7 +121,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -130,7 +130,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -139,14 +139,14 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; - interrupts = <5 4>; + interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -155,7 +155,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x4000>; - interrupts = <6 4>; + interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -164,7 +164,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x4000>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -173,7 +173,7 @@ usart3: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x4000>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -201,7 +201,7 @@ usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 6b3ef4339ae..4a18c393b13 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -51,10 +51,11 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; }; ramc0: ramc@ffffe800 { @@ -80,37 +81,37 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; dma0: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4>; + interrupts = <20 4 0>; }; dma1: dma-controller@ffffee00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffee00 0x200>; - interrupts = <21 4>; + interrupts = <21 4 0>; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -119,7 +120,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -128,7 +129,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -137,7 +138,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -146,14 +147,14 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x200>; - interrupts = <5 4>; + interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -162,7 +163,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x200>; - interrupts = <6 4>; + interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -171,7 +172,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -180,21 +181,21 @@ macb0: ethernet@f802c000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; - interrupts = <24 4>; + interrupts = <24 4 3>; status = "disabled"; }; macb1: ethernet@f8030000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf8030000 0x100>; - interrupts = <27 4>; + interrupts = <27 4 3>; status = "disabled"; }; adc0: adc@f804c000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf804c000 0x100>; - interrupts = <19 4>; + interrupts = <19 4 0>; atmel,adc-use-external; atmel,adc-channels-used = <0xffff>; atmel,adc-vref = <3300>; @@ -248,14 +249,14 @@ usb0: ohci@00600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; usb1: ehci@00700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 7de701365fc..f146dbf6f7f 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -307,7 +307,6 @@ cd-gpios = <&gpio 58 0>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index bfeb117d5ae..684a9e1ff7e 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -301,7 +301,6 @@ sdhci@c8000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 89cb7f2acd9..b797901d040 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -334,7 +334,7 @@ }; }; - emc { + memory-controller@0x7000f400 { emc-table@190000 { reg = <190000>; compatible = "nvidia,tegra20-emc-table"; @@ -397,7 +397,6 @@ sdhci@c8000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 9de5636023f..9de5636023f 100644 --- a/arch/arm/boot/dts/tegra-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 445343b0fbd..be90544e6b5 100644 --- a/arch/arm/boot/dts/tegra-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -314,7 +314,6 @@ sdhci@c8000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index c417d67e902..9f1921634eb 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -72,7 +72,7 @@ reg = <0x70002800 0x200>; interrupts = <0 13 0x04>; nvidia,dma-request-selector = <&apbdma 2>; - status = "disable"; + status = "disabled"; }; tegra_i2s2: i2s@70002a00 { @@ -80,7 +80,7 @@ reg = <0x70002a00 0x200>; interrupts = <0 3 0x04>; nvidia,dma-request-selector = <&apbdma 1>; - status = "disable"; + status = "disabled"; }; serial@70006000 { @@ -88,7 +88,7 @@ reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <0 36 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006040 { @@ -96,7 +96,7 @@ reg = <0x70006040 0x40>; reg-shift = <2>; interrupts = <0 37 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006200 { @@ -104,7 +104,7 @@ reg = <0x70006200 0x100>; reg-shift = <2>; interrupts = <0 46 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006300 { @@ -112,7 +112,7 @@ reg = <0x70006300 0x100>; reg-shift = <2>; interrupts = <0 90 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006400 { @@ -120,7 +120,7 @@ reg = <0x70006400 0x100>; reg-shift = <2>; interrupts = <0 91 0x04>; - status = "disable"; + status = "disabled"; }; i2c@7000c000 { @@ -129,7 +129,7 @@ interrupts = <0 38 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c400 { @@ -138,7 +138,7 @@ interrupts = <0 84 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c500 { @@ -147,7 +147,7 @@ interrupts = <0 92 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000d000 { @@ -156,7 +156,7 @@ interrupts = <0 53 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; pmc { @@ -164,7 +164,7 @@ reg = <0x7000e400 0x400>; }; - mc { + memory-controller@0x7000f000 { compatible = "nvidia,tegra20-mc"; reg = <0x7000f000 0x024 0x7000f03c 0x3c4>; @@ -177,7 +177,7 @@ 0x58000000 0x02000000>; /* GART aperture */ }; - emc { + memory-controller@0x7000f400 { compatible = "nvidia,tegra20-emc"; reg = <0x7000f400 0x200>; #address-cells = <1>; @@ -190,7 +190,7 @@ interrupts = <0 20 0x04>; phy_type = "utmi"; nvidia,has-legacy-mode; - status = "disable"; + status = "disabled"; }; usb@c5004000 { @@ -198,7 +198,7 @@ reg = <0xc5004000 0x4000>; interrupts = <0 21 0x04>; phy_type = "ulpi"; - status = "disable"; + status = "disabled"; }; usb@c5008000 { @@ -206,35 +206,35 @@ reg = <0xc5008000 0x4000>; interrupts = <0 97 0x04>; phy_type = "utmi"; - status = "disable"; + status = "disabled"; }; sdhci@c8000000 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000000 0x200>; interrupts = <0 14 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@c8000200 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000200 0x200>; interrupts = <0 15 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@c8000400 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000400 0x200>; interrupts = <0 19 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@c8000600 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000600 0x200>; interrupts = <0 31 0x04>; - status = "disable"; + status = "disabled"; }; pmu { diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra30-cardhu.dts index 36321bceec4..c169bced131 100644 --- a/arch/arm/boot/dts/tegra-cardhu.dts +++ b/arch/arm/boot/dts/tegra30-cardhu.dts @@ -144,7 +144,6 @@ sdhci@78000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 2dcc09e784b..da740191771 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -82,7 +82,7 @@ reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <0 36 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006040 { @@ -90,7 +90,7 @@ reg = <0x70006040 0x40>; reg-shift = <2>; interrupts = <0 37 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006200 { @@ -98,7 +98,7 @@ reg = <0x70006200 0x100>; reg-shift = <2>; interrupts = <0 46 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006300 { @@ -106,7 +106,7 @@ reg = <0x70006300 0x100>; reg-shift = <2>; interrupts = <0 90 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006400 { @@ -114,7 +114,7 @@ reg = <0x70006400 0x100>; reg-shift = <2>; interrupts = <0 91 0x04>; - status = "disable"; + status = "disabled"; }; i2c@7000c000 { @@ -123,7 +123,7 @@ interrupts = <0 38 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c400 { @@ -132,7 +132,7 @@ interrupts = <0 84 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c500 { @@ -141,7 +141,7 @@ interrupts = <0 92 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c700 { @@ -150,7 +150,7 @@ interrupts = <0 120 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000d000 { @@ -159,7 +159,7 @@ interrupts = <0 53 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; pmc { @@ -167,7 +167,7 @@ reg = <0x7000e400 0x400>; }; - mc { + memory-controller { compatible = "nvidia,tegra30-mc"; reg = <0x7000f000 0x010 0x7000f03c 0x1b4 @@ -201,35 +201,35 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080300 0x100>; nvidia,ahub-cif-ids = <4 4>; - status = "disable"; + status = "disabled"; }; tegra_i2s1: i2s@70080400 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080400 0x100>; nvidia,ahub-cif-ids = <5 5>; - status = "disable"; + status = "disabled"; }; tegra_i2s2: i2s@70080500 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080500 0x100>; nvidia,ahub-cif-ids = <6 6>; - status = "disable"; + status = "disabled"; }; tegra_i2s3: i2s@70080600 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080600 0x100>; nvidia,ahub-cif-ids = <7 7>; - status = "disable"; + status = "disabled"; }; tegra_i2s4: i2s@70080700 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080700 0x100>; nvidia,ahub-cif-ids = <8 8>; - status = "disable"; + status = "disabled"; }; }; @@ -237,28 +237,28 @@ compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000000 0x200>; interrupts = <0 14 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@78000200 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000200 0x200>; interrupts = <0 15 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@78000400 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000400 0x200>; interrupts = <0 19 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@78000600 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000600 0x200>; interrupts = <0 31 0x04>; - status = "disable"; + status = "disabled"; }; pmu { diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 8349d4e97e2..16cedb42c0c 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -40,13 +40,6 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> -/* - * No architecture-specific irq_finish function defined in arm/arch/irqs.h. - */ -#ifndef irq_finish -#define irq_finish(irq) do { } while (0) -#endif - unsigned long irq_err_count; int arch_show_interrupts(struct seq_file *p, int prec) @@ -85,9 +78,6 @@ void handle_IRQ(unsigned int irq, struct pt_regs *regs) generic_handle_irq(irq); } - /* AT91 specific workaround */ - irq_finish(irq); - irq_exit(); set_irq_regs(old_regs); } diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 19505c0a3f0..c8050b14e61 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -29,12 +29,16 @@ comment "Atmel AT91 Processor" config SOC_AT91SAM9 bool select CPU_ARM926T + select MULTI_IRQ_HANDLER + select SPARSE_IRQ select AT91_SAM9_TIME select AT91_SAM9_SMC config SOC_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T + select MULTI_IRQ_HANDLER + select SPARSE_IRQ select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 @@ -140,6 +144,8 @@ config ARCH_AT91SAM9G45 config ARCH_AT91X40 bool "AT91x40" depends on !MMU + select MULTI_IRQ_HANDLER + select SPARSE_IRQ select ARCH_USES_GETTIMEOFFSET endchoice diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 26917687fc3..6f50c672227 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -17,6 +17,7 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91rm9200.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/at91_st.h> #include <mach/cpu.h> diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index e6b7d0533dd..01fb7325fec 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -41,8 +41,8 @@ static struct resource usbh_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_UHP, - .end = AT91RM9200_ID_UHP, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_UHP, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -94,8 +94,8 @@ static struct resource udc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_UDP, - .end = AT91RM9200_ID_UDP, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_UDP, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -145,8 +145,8 @@ static struct resource eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_EMAC, - .end = AT91RM9200_ID_EMAC, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_EMAC, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -305,8 +305,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_MCI, - .end = AT91RM9200_ID_MCI, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_MCI, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -488,8 +488,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_TWI, - .end = AT91RM9200_ID_TWI, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TWI, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TWI, .flags = IORESOURCE_IRQ, }, }; @@ -532,8 +532,8 @@ static struct resource spi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_SPI, - .end = AT91RM9200_ID_SPI, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_SPI, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_SPI, .flags = IORESOURCE_IRQ, }, }; @@ -598,18 +598,18 @@ static struct resource tcb0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_TC0, - .end = AT91RM9200_ID_TC0, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC0, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC0, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91RM9200_ID_TC1, - .end = AT91RM9200_ID_TC1, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC1, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC1, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91RM9200_ID_TC2, - .end = AT91RM9200_ID_TC2, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC2, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC2, .flags = IORESOURCE_IRQ, }, }; @@ -628,18 +628,18 @@ static struct resource tcb1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_TC3, - .end = AT91RM9200_ID_TC3, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC3, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC3, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91RM9200_ID_TC4, - .end = AT91RM9200_ID_TC4, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC4, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC4, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91RM9200_ID_TC5, - .end = AT91RM9200_ID_TC5, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC5, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC5, .flags = IORESOURCE_IRQ, }, }; @@ -673,8 +673,8 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -729,8 +729,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_SSC0, - .end = AT91RM9200_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -771,8 +771,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_SSC1, - .end = AT91RM9200_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -813,8 +813,8 @@ static struct resource ssc2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_SSC2, - .end = AT91RM9200_ID_SSC2, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC2, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC2, .flags = IORESOURCE_IRQ, }, }; @@ -897,8 +897,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -935,8 +935,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_US0, - .end = AT91RM9200_ID_US0, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_US0, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -984,8 +984,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_US1, - .end = AT91RM9200_ID_US1, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_US1, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1035,8 +1035,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_US2, - .end = AT91RM9200_ID_US2, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_US2, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -1078,8 +1078,8 @@ static struct resource uart3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_US3, - .end = AT91RM9200_ID_US3, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_US3, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_US3, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 2b1e438ed87..30c7f26a466 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -20,6 +20,7 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9260.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 0ded951f785..7b9c2ba396e 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -45,8 +45,8 @@ static struct resource usbh_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_UHP, - .end = AT91SAM9260_ID_UHP, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -98,8 +98,8 @@ static struct resource udc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_UDP, - .end = AT91SAM9260_ID_UDP, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -149,8 +149,8 @@ static struct resource eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_EMAC, - .end = AT91SAM9260_ID_EMAC, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -223,8 +223,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_MCI, - .end = AT91SAM9260_ID_MCI, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -305,8 +305,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_MCI, - .end = AT91SAM9260_ID_MCI, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -496,8 +496,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_TWI, - .end = AT91SAM9260_ID_TWI, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI, .flags = IORESOURCE_IRQ, }, }; @@ -540,8 +540,8 @@ static struct resource spi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_SPI0, - .end = AT91SAM9260_ID_SPI0, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0, .flags = IORESOURCE_IRQ, }, }; @@ -566,8 +566,8 @@ static struct resource spi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_SPI1, - .end = AT91SAM9260_ID_SPI1, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1, .flags = IORESOURCE_IRQ, }, }; @@ -652,18 +652,18 @@ static struct resource tcb0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_TC0, - .end = AT91SAM9260_ID_TC0, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91SAM9260_ID_TC1, - .end = AT91SAM9260_ID_TC1, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91SAM9260_ID_TC2, - .end = AT91SAM9260_ID_TC2, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2, .flags = IORESOURCE_IRQ, }, }; @@ -682,18 +682,18 @@ static struct resource tcb1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_TC3, - .end = AT91SAM9260_ID_TC3, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91SAM9260_ID_TC4, - .end = AT91SAM9260_ID_TC4, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91SAM9260_ID_TC5, - .end = AT91SAM9260_ID_TC5, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5, .flags = IORESOURCE_IRQ, }, }; @@ -807,8 +807,8 @@ static struct resource ssc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_SSC, - .end = AT91SAM9260_ID_SSC, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC, .flags = IORESOURCE_IRQ, }, }; @@ -882,8 +882,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -920,8 +920,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US0, - .end = AT91SAM9260_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -971,8 +971,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US1, - .end = AT91SAM9260_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1014,8 +1014,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US2, - .end = AT91SAM9260_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -1057,8 +1057,8 @@ static struct resource uart3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US3, - .end = AT91SAM9260_ID_US3, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US3, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US3, .flags = IORESOURCE_IRQ, }, }; @@ -1100,8 +1100,8 @@ static struct resource uart4_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US4, - .end = AT91SAM9260_ID_US4, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US4, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US4, .flags = IORESOURCE_IRQ, }, }; @@ -1138,8 +1138,8 @@ static struct resource uart5_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US5, - .end = AT91SAM9260_ID_US5, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US5, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US5, .flags = IORESOURCE_IRQ, }, }; @@ -1357,8 +1357,8 @@ static struct resource adc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_ADC, - .end = AT91SAM9260_ID_ADC, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index c77d503d09d..f40762c5fed 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -19,6 +19,7 @@ #include <asm/system_misc.h> #include <mach/cpu.h> #include <mach/at91sam9261.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 9295e90b08f..8df5c1bdff9 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -45,8 +45,8 @@ static struct resource usbh_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_UHP, - .end = AT91SAM9261_ID_UHP, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_UHP, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -98,8 +98,8 @@ static struct resource udc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_UDP, - .end = AT91SAM9261_ID_UDP, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_UDP, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -148,8 +148,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_MCI, - .end = AT91SAM9261_ID_MCI, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_MCI, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -310,8 +310,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_TWI, - .end = AT91SAM9261_ID_TWI, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TWI, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TWI, .flags = IORESOURCE_IRQ, }, }; @@ -354,8 +354,8 @@ static struct resource spi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SPI0, - .end = AT91SAM9261_ID_SPI0, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI0, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI0, .flags = IORESOURCE_IRQ, }, }; @@ -380,8 +380,8 @@ static struct resource spi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SPI1, - .end = AT91SAM9261_ID_SPI1, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI1, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI1, .flags = IORESOURCE_IRQ, }, }; @@ -468,8 +468,8 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_LCDC, - .end = AT91SAM9261_ID_LCDC, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_LCDC, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_LCDC, .flags = IORESOURCE_IRQ, }, #if defined(CONFIG_FB_INTSRAM) @@ -566,18 +566,18 @@ static struct resource tcb_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_TC0, - .end = AT91SAM9261_ID_TC0, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC0, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC0, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91SAM9261_ID_TC1, - .end = AT91SAM9261_ID_TC1, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC1, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC1, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91SAM9261_ID_TC2, - .end = AT91SAM9261_ID_TC2, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC2, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC2, .flags = IORESOURCE_IRQ, }, }; @@ -689,8 +689,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SSC0, - .end = AT91SAM9261_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -731,8 +731,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SSC1, - .end = AT91SAM9261_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -773,8 +773,8 @@ static struct resource ssc2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SSC2, - .end = AT91SAM9261_ID_SSC2, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC2, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC2, .flags = IORESOURCE_IRQ, }, }; @@ -857,8 +857,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -895,8 +895,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_US0, - .end = AT91SAM9261_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -938,8 +938,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_US1, - .end = AT91SAM9261_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -981,8 +981,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_US2, - .end = AT91SAM9261_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US2, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index ed91c7e9f7c..84b38105231 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -18,6 +18,7 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91sam9263.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 175e0009eaa..eb6bbf86fb9 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -44,8 +44,8 @@ static struct resource usbh_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_UHP, - .end = AT91SAM9263_ID_UHP, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -104,8 +104,8 @@ static struct resource udc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_UDP, - .end = AT91SAM9263_ID_UDP, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -155,8 +155,8 @@ static struct resource eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_EMAC, - .end = AT91SAM9263_ID_EMAC, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -229,8 +229,8 @@ static struct resource mmc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_MCI0, - .end = AT91SAM9263_ID_MCI0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0, .flags = IORESOURCE_IRQ, }, }; @@ -254,8 +254,8 @@ static struct resource mmc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_MCI1, - .end = AT91SAM9263_ID_MCI1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1, .flags = IORESOURCE_IRQ, }, }; @@ -567,8 +567,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_TWI, - .end = AT91SAM9263_ID_TWI, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI, .flags = IORESOURCE_IRQ, }, }; @@ -611,8 +611,8 @@ static struct resource spi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SPI0, - .end = AT91SAM9263_ID_SPI0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0, .flags = IORESOURCE_IRQ, }, }; @@ -637,8 +637,8 @@ static struct resource spi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SPI1, - .end = AT91SAM9263_ID_SPI1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1, .flags = IORESOURCE_IRQ, }, }; @@ -725,8 +725,8 @@ static struct resource ac97_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_AC97C, - .end = AT91SAM9263_ID_AC97C, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C, .flags = IORESOURCE_IRQ, }, }; @@ -776,8 +776,8 @@ static struct resource can_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_CAN, - .end = AT91SAM9263_ID_CAN, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN, .flags = IORESOURCE_IRQ, }, }; @@ -816,8 +816,8 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_LCDC, - .end = AT91SAM9263_ID_LCDC, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC, .flags = IORESOURCE_IRQ, }, }; @@ -883,8 +883,8 @@ struct resource isi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_ISI, - .end = AT91SAM9263_ID_ISI, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI, .flags = IORESOURCE_IRQ, }, }; @@ -940,8 +940,8 @@ static struct resource tcb_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_TCB, - .end = AT91SAM9263_ID_TCB, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB, .flags = IORESOURCE_IRQ, }, }; @@ -1108,8 +1108,8 @@ static struct resource pwm_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_PWMC, - .end = AT91SAM9263_ID_PWMC, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC, .flags = IORESOURCE_IRQ, }, }; @@ -1161,8 +1161,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SSC0, - .end = AT91SAM9263_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -1203,8 +1203,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SSC1, - .end = AT91SAM9263_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -1284,8 +1284,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -1322,8 +1322,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_US0, - .end = AT91SAM9263_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -1365,8 +1365,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_US1, - .end = AT91SAM9263_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1408,8 +1408,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_US2, - .end = AT91SAM9263_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US2, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index a94758b4273..ffc0957d762 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -137,7 +137,7 @@ static struct irqaction at91sam926x_pit_irq = { .name = "at91_tick", .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, .handler = at91sam926x_pit_interrupt, - .irq = AT91_ID_SYS, + .irq = NR_IRQS_LEGACY + AT91_ID_SYS, }; static void at91sam926x_pit_reset(void) diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 4792682d52b..977127368a7 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -18,6 +18,7 @@ #include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/at91sam9g45.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 933fc9afe7d..40fb79df2de 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -53,8 +53,8 @@ static struct resource hdmac_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_DMA, - .end = AT91SAM9G45_ID_DMA, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA, .flags = IORESOURCE_IRQ, }, }; @@ -94,8 +94,8 @@ static struct resource usbh_ohci_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_UHPHS, - .end = AT91SAM9G45_ID_UHPHS, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, .flags = IORESOURCE_IRQ, }, }; @@ -156,8 +156,8 @@ static struct resource usbh_ehci_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_UHPHS, - .end = AT91SAM9G45_ID_UHPHS, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, .flags = IORESOURCE_IRQ, }, }; @@ -213,8 +213,8 @@ static struct resource usba_udc_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = AT91SAM9G45_ID_UDPHS, - .end = AT91SAM9G45_ID_UDPHS, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS, .flags = IORESOURCE_IRQ, }, }; @@ -296,8 +296,8 @@ static struct resource eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_EMAC, - .end = AT91SAM9G45_ID_EMAC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -370,8 +370,8 @@ static struct resource mmc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_MCI0, - .end = AT91SAM9G45_ID_MCI0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0, .flags = IORESOURCE_IRQ, }, }; @@ -395,8 +395,8 @@ static struct resource mmc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_MCI1, - .end = AT91SAM9G45_ID_MCI1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1, .flags = IORESOURCE_IRQ, }, }; @@ -645,8 +645,8 @@ static struct resource twi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TWI0, - .end = AT91SAM9G45_ID_TWI0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0, .flags = IORESOURCE_IRQ, }, }; @@ -665,8 +665,8 @@ static struct resource twi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TWI1, - .end = AT91SAM9G45_ID_TWI1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1, .flags = IORESOURCE_IRQ, }, }; @@ -720,8 +720,8 @@ static struct resource spi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_SPI0, - .end = AT91SAM9G45_ID_SPI0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0, .flags = IORESOURCE_IRQ, }, }; @@ -746,8 +746,8 @@ static struct resource spi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_SPI1, - .end = AT91SAM9G45_ID_SPI1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1, .flags = IORESOURCE_IRQ, }, }; @@ -834,8 +834,8 @@ static struct resource ac97_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_AC97C, - .end = AT91SAM9G45_ID_AC97C, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C, .flags = IORESOURCE_IRQ, }, }; @@ -887,8 +887,8 @@ struct resource isi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_ISI, - .end = AT91SAM9G45_ID_ISI, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI, .flags = IORESOURCE_IRQ, }, }; @@ -979,8 +979,8 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_LCDC, - .end = AT91SAM9G45_ID_LCDC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC, .flags = IORESOURCE_IRQ, }, }; @@ -1054,8 +1054,8 @@ static struct resource tcb0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TCB, - .end = AT91SAM9G45_ID_TCB, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, .flags = IORESOURCE_IRQ, }, }; @@ -1075,8 +1075,8 @@ static struct resource tcb1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TCB, - .end = AT91SAM9G45_ID_TCB, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, .flags = IORESOURCE_IRQ, }, }; @@ -1110,8 +1110,8 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -1147,8 +1147,8 @@ static struct resource tsadcc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TSC, - .end = AT91SAM9G45_ID_TSC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, .flags = IORESOURCE_IRQ, } }; @@ -1197,8 +1197,8 @@ static struct resource adc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TSC, - .end = AT91SAM9G45_ID_TSC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, .flags = IORESOURCE_IRQ, } }; @@ -1400,8 +1400,8 @@ static struct resource pwm_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_PWMC, - .end = AT91SAM9G45_ID_PWMC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC, .flags = IORESOURCE_IRQ, }, }; @@ -1453,8 +1453,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_SSC0, - .end = AT91SAM9G45_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -1495,8 +1495,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_SSC1, - .end = AT91SAM9G45_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -1575,8 +1575,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -1613,8 +1613,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_US0, - .end = AT91SAM9G45_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -1656,8 +1656,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_US1, - .end = AT91SAM9G45_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1699,8 +1699,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_US2, - .end = AT91SAM9G45_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -1742,8 +1742,8 @@ static struct resource uart3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_US3, - .end = AT91SAM9G45_ID_US3, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US3, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US3, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index e420085a57e..72ce50a50de 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -19,6 +19,7 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> #include <mach/at91sam9rl.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 9c0b1481a9a..f09fff93217 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -41,8 +41,8 @@ static struct resource hdmac_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = AT91SAM9RL_ID_DMA, - .end = AT91SAM9RL_ID_DMA, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_DMA, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_DMA, .flags = IORESOURCE_IRQ, }, }; @@ -84,8 +84,8 @@ static struct resource usba_udc_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = AT91SAM9RL_ID_UDPHS, - .end = AT91SAM9RL_ID_UDPHS, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_UDPHS, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_UDPHS, .flags = IORESOURCE_IRQ, }, }; @@ -172,8 +172,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_MCI, - .end = AT91SAM9RL_ID_MCI, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_MCI, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -339,8 +339,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_TWI0, - .end = AT91SAM9RL_ID_TWI0, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TWI0, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TWI0, .flags = IORESOURCE_IRQ, }, }; @@ -383,8 +383,8 @@ static struct resource spi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_SPI, - .end = AT91SAM9RL_ID_SPI, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SPI, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SPI, .flags = IORESOURCE_IRQ, }, }; @@ -452,8 +452,8 @@ static struct resource ac97_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_AC97C, - .end = AT91SAM9RL_ID_AC97C, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_AC97C, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_AC97C, .flags = IORESOURCE_IRQ, }, }; @@ -507,8 +507,8 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_LCDC, - .end = AT91SAM9RL_ID_LCDC, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_LCDC, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_LCDC, .flags = IORESOURCE_IRQ, }, }; @@ -574,18 +574,18 @@ static struct resource tcb_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_TC0, - .end = AT91SAM9RL_ID_TC0, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC0, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC0, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91SAM9RL_ID_TC1, - .end = AT91SAM9RL_ID_TC1, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC1, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC1, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91SAM9RL_ID_TC2, - .end = AT91SAM9RL_ID_TC2, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC2, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC2, .flags = IORESOURCE_IRQ, }, }; @@ -621,8 +621,8 @@ static struct resource tsadcc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_TSC, - .end = AT91SAM9RL_ID_TSC, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC, .flags = IORESOURCE_IRQ, } }; @@ -768,8 +768,8 @@ static struct resource pwm_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_PWMC, - .end = AT91SAM9RL_ID_PWMC, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_PWMC, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_PWMC, .flags = IORESOURCE_IRQ, }, }; @@ -821,8 +821,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_SSC0, - .end = AT91SAM9RL_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -863,8 +863,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_SSC1, - .end = AT91SAM9RL_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -943,8 +943,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -981,8 +981,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_US0, - .end = AT91SAM9RL_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -1032,8 +1032,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_US1, - .end = AT91SAM9RL_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1075,8 +1075,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_US2, - .end = AT91SAM9RL_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -1118,8 +1118,8 @@ static struct resource uart3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_US3, - .end = AT91SAM9RL_ID_US3, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US3, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US3, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 1b144b4d3ce..477cf9d0667 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -312,8 +312,6 @@ static void __init at91sam9x5_map_io(void) void __init at91sam9x5_initialize(void) { - at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0); - /* Register GPIO subsystem (using DT) */ at91_gpio_init(NULL, 0); } @@ -321,47 +319,9 @@ void __init at91sam9x5_initialize(void) /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller (FIQ) */ - 7, /* System Peripherals */ - 1, /* Parallel IO Controller A and B */ - 1, /* Parallel IO Controller C and D */ - 4, /* Soft Modem */ - 5, /* USART 0 */ - 5, /* USART 1 */ - 5, /* USART 2 */ - 5, /* USART 3 */ - 6, /* Two-Wire Interface 0 */ - 6, /* Two-Wire Interface 1 */ - 6, /* Two-Wire Interface 2 */ - 0, /* Multimedia Card Interface 0 */ - 5, /* Serial Peripheral Interface 0 */ - 5, /* Serial Peripheral Interface 1 */ - 5, /* UART 0 */ - 5, /* UART 1 */ - 0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */ - 0, /* Pulse Width Modulation Controller */ - 0, /* ADC Controller */ - 0, /* DMA Controller 0 */ - 0, /* DMA Controller 1 */ - 2, /* USB Host High Speed port */ - 2, /* USB Device High speed port */ - 3, /* Ethernet MAC 0 */ - 3, /* LDC Controller or Image Sensor Interface */ - 0, /* Multimedia Card Interface 1 */ - 3, /* Ethernet MAC 1 */ - 4, /* Synchronous Serial Interface */ - 4, /* CAN Controller 0 */ - 4, /* CAN Controller 1 */ - 0, /* Advanced Interrupt Controller (IRQ0) */ -}; struct at91_init_soc __initdata at91sam9x5_soc = { .map_io = at91sam9x5_map_io, - .default_irq_priority = at91sam9x5_default_irq_priority, .register_clocks = at91sam9x5_register_clocks, .init = at91sam9x5_initialize, }; diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index d62fe090d81..46090e642d8 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -13,10 +13,12 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> +#include <linux/io.h> #include <asm/proc-fns.h> #include <asm/system_misc.h> #include <asm/mach/arch.h> #include <mach/at91x40.h> +#include <mach/at91_aic.h> #include <mach/at91_st.h> #include <mach/timex.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 271f994314a..22d8856094f 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -36,6 +36,7 @@ #include <mach/board.h> #include <mach/cpu.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -91,6 +92,7 @@ MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = onearm_init_early, .init_irq = at91_init_irq_default, .init_machine = onearm_board_init, diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index b7d8aa7b81e..de7be193181 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -44,6 +44,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -212,6 +213,7 @@ MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin <slapin@ossfans.org> */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = afeb9260_init_early, .init_irq = at91_init_irq_default, .init_machine = afeb9260_board_init, diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 29d3ef0a50f..477e708497b 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -39,6 +39,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" @@ -188,6 +189,7 @@ MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = cam60_init_early, .init_irq = at91_init_irq_default, .init_machine = cam60_board_init, diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 44328a6d460..a5b002f32a6 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -36,6 +36,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -158,6 +159,7 @@ MACHINE_START(CARMEVA, "Carmeva") /* Maintainer: Conitec Datasystems */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = carmeva_init_early, .init_irq = at91_init_irq_default, .init_machine = carmeva_board_init, diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 69951ec7dbf..ecbc13b594d 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -41,6 +41,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91sam9260_matrix.h> #include <mach/at91_matrix.h> @@ -376,6 +377,7 @@ MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") /* Maintainer: Eric Benard - EUKREA Electromatique */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = cpu9krea_init_early, .init_irq = at91_init_irq_default, .init_machine = cpu9krea_board_init, diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 895cf2dba61..2e6d043c82f 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -37,6 +37,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> #include <mach/cpu.h> @@ -178,6 +179,7 @@ MACHINE_START(CPUAT91, "Eukrea") /* Maintainer: Eric Benard - EUKREA Electromatique */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = cpuat91_init_early, .init_irq = at91_init_irq_default, .init_machine = cpuat91_board_init, diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index cd813361cd2..462bc319cbc 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -39,6 +39,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -252,6 +253,7 @@ MACHINE_START(CSB337, "Cogent CSB337") /* Maintainer: Bill Gatliff */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = csb337_init_early, .init_irq = at91_init_irq_default, .init_machine = csb337_board_init, diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 7c8b05a57d7..872871ab116 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -36,6 +36,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -133,6 +134,7 @@ MACHINE_START(CSB637, "Cogent CSB637") /* Maintainer: Bill Gatliff */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = csb637_init_early, .init_irq = at91_init_irq_default, .init_machine = csb637_board_init, diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c index a1fce05aa7a..e8f45c4e0ea 100644 --- a/arch/arm/mach-at91/board-dt.c +++ b/arch/arm/mach-at91/board-dt.c @@ -16,6 +16,7 @@ #include <linux/of_platform.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <asm/setup.h> #include <asm/irq.h> @@ -53,6 +54,7 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = at91_dt_initialize, .init_irq = at91_dt_init_irq, .init_machine = at91_dt_device_init, diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c index d2023f27c65..01f66e99ece 100644 --- a/arch/arm/mach-at91/board-eb01.c +++ b/arch/arm/mach-at91/board-eb01.c @@ -28,6 +28,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" static void __init at91eb01_init_irq(void) @@ -43,6 +44,7 @@ static void __init at91eb01_init_early(void) MACHINE_START(AT91EB01, "Atmel AT91 EB01") /* Maintainer: Greg Ungerer <gerg@snapgear.com> */ .timer = &at91x40_timer, + .handle_irq = at91_aic_handle_irq, .init_early = at91eb01_init_early, .init_irq = at91eb01_init_irq, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index bd101729798..d1e1f3fc0a4 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -36,6 +36,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -118,6 +119,7 @@ static void __init eb9200_board_init(void) MACHINE_START(ATEB9200, "Embest ATEB9200") .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = eb9200_init_early, .init_irq = at91_init_irq_default, .init_machine = eb9200_board_init, diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index 89cc3726a9c..9c24cb25707 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -39,6 +39,7 @@ #include <mach/board.h> #include <mach/cpu.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -170,6 +171,7 @@ MACHINE_START(ECBAT91, "emQbit's ECB_AT91") /* Maintainer: emQbit.com */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ecb_at91init_early, .init_irq = at91_init_irq_default, .init_machine = ecb_at91board_init, diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 558546cf63f..82bdfde3405 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -25,6 +25,7 @@ #include <asm/mach/map.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> #include <mach/cpu.h> @@ -132,6 +133,7 @@ MACHINE_START(ECO920, "eco920") /* Maintainer: Sascha Hauer */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = eco920_init_early, .init_irq = at91_init_irq_default, .init_machine = eco920_board_init, diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 47658f78105..6cc83a87d77 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -34,6 +34,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include "generic.h" @@ -160,6 +161,7 @@ MACHINE_START(FLEXIBITY, "Flexibity Connect") /* Maintainer: Maxim Osipov */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = flexibity_init_early, .init_irq = at91_init_irq_default, .init_machine = flexibity_board_init, diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index 33411e6ecb1..69ab1247ef8 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -42,6 +42,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" @@ -262,6 +263,7 @@ MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20") /* Maintainer: Sergio Tanzilli */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = foxg20_init_early, .init_irq = at91_init_irq_default, .init_machine = foxg20_board_init, diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index 3e0dfa643a8..a9d5e78118c 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -31,6 +31,7 @@ #include <asm/mach/arch.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/gsia18s.h> #include <mach/stamp9g20.h> @@ -575,6 +576,7 @@ static void __init gsia18s_board_init(void) MACHINE_START(GSIA18S, "GS_IA18_S") .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = gsia18s_init_early, .init_irq = at91_init_irq_default, .init_machine = gsia18s_board_init, diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index f260657f32b..64c1dbf88a0 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -35,6 +35,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/cpu.h> #include "generic.h" @@ -93,6 +94,7 @@ MACHINE_START(KAFA, "Sperry-Sun KAFA") /* Maintainer: Sergei Sharonov */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = kafa_init_early, .init_irq = at91_init_irq_default, .init_machine = kafa_board_init, diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index ba39db5482b..5d96cb85175 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -37,6 +37,7 @@ #include <mach/board.h> #include <mach/cpu.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> @@ -133,6 +134,7 @@ MACHINE_START(KB9200, "KB920x") /* Maintainer: KwikByte, Inc. */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = kb9202_init_early, .init_irq = at91_init_irq_default, .init_machine = kb9202_board_init, diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index d2f4cc16176..18103c5d993 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -45,6 +45,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" @@ -378,6 +379,7 @@ MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926") /* Maintainer: ADENEO */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = neocore926_init_early, .init_irq = at91_init_irq_default, .init_machine = neocore926_board_init, diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 7fe63834242..9ca3e32c54c 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -30,6 +30,7 @@ #include <asm/mach/arch.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/stamp9g20.h> @@ -218,6 +219,7 @@ MACHINE_START(PCONTROL_G20, "PControl G20") /* Maintainer: pgsellmann@portner-elektronik.at */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = pcontrol_g20_init_early, .init_irq = at91_init_irq_default, .init_machine = pcontrol_g20_board_init, diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index b45c0a5d5ca..12706550450 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -38,6 +38,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> @@ -120,6 +121,7 @@ MACHINE_START(PICOTUX2XX, "picotux 200") /* Maintainer: Kleinhenz Elektronik GmbH */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = picotux200_init_early, .init_irq = at91_init_irq_default, .init_machine = picotux200_board_init, diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 0c61bf0d272..bf351e28542 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -41,6 +41,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> @@ -258,6 +259,7 @@ MACHINE_START(QIL_A9260, "CALAO QIL_A9260") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index afd7a471376..cc2bf979607 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -40,6 +40,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> @@ -223,6 +224,7 @@ MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") /* Maintainer: SAN People/Atmel */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = dk_init_early, .init_irq = at91_init_irq_default, .init_machine = dk_board_init, diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 2b15b8adec4..62e19e64c9d 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -40,6 +40,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> @@ -190,6 +191,7 @@ MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") /* Maintainer: SAN People/Atmel */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c index 24ab9be7510..c3b43aefdb7 100644 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -26,6 +26,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <linux/gpio.h> @@ -225,6 +226,7 @@ MACHINE_START(RSI_EWS, "RSI EWS") /* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = rsi_ews_init_early, .init_irq = at91_init_irq_default, .init_machine = rsi_ews_board_init, diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index cdd21f2595d..7bf6da70d7d 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -38,6 +38,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" @@ -202,6 +203,7 @@ MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 7b3c3913551..889c1bf71eb 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -42,6 +42,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> @@ -344,6 +345,7 @@ MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 2736453821b..2269be5fa38 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -46,6 +46,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> @@ -615,6 +616,7 @@ MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 983cb98d246..82adf581afc 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -45,6 +45,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> @@ -443,6 +444,7 @@ MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 6860d345110..4ea4ee00364 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -44,6 +44,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/system_rev.h> @@ -413,6 +414,7 @@ MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, @@ -422,6 +424,7 @@ MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 63163dc7df4..3d48ec15468 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -43,6 +43,7 @@ #include <asm/mach/irq.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> #include <mach/system_rev.h> @@ -503,6 +504,7 @@ MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index be3239f13da..e7dc3ead704 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -31,6 +31,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> @@ -319,6 +320,7 @@ MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 9d446f1bb45..a4e031a039f 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -33,6 +33,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" @@ -178,6 +179,7 @@ static void __init snapper9260_board_init(void) MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = snapper9260_init_early, .init_irq = at91_init_irq_default, .init_machine = snapper9260_board_init, diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index ee86f9d7ee7..29eae1626bf 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -26,6 +26,7 @@ #include <asm/mach/arch.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include "sam9_smc.h" @@ -287,6 +288,7 @@ MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = stamp9g20_init_early, .init_irq = at91_init_irq_default, .init_machine = portuxg20_board_init, @@ -296,6 +298,7 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = stamp9g20_init_early, .init_irq = at91_init_irq_default, .init_machine = stamp9g20evb_board_init, diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c index 95393fcaf19..c1476b9fe7b 100644 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ b/arch/arm/mach-at91/board-usb-a926x.c @@ -42,6 +42,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> @@ -358,6 +359,7 @@ MACHINE_START(USB_A9263, "CALAO USB_A9263") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, @@ -367,6 +369,7 @@ MACHINE_START(USB_A9260, "CALAO USB_A9260") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, @@ -376,6 +379,7 @@ MACHINE_START(USB_A9G20, "CALAO USB_A92G0") /* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index d56665ea4b5..516d340549d 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -44,6 +44,7 @@ #include <mach/hardware.h> #include <mach/board.h> +#include <mach/at91_aic.h> #include <mach/at91rm9200_mc.h> #include <mach/at91_ramc.h> #include <mach/cpu.h> @@ -590,6 +591,7 @@ MACHINE_START(YL9200, "uCdragon YL-9200") /* Maintainer: S.Birtles */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = yl9200_init_early, .init_irq = at91_init_irq_default, .init_machine = yl9200_board_init, diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 0a60bf83703..f4965067765 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -29,6 +29,8 @@ extern void __init at91x40_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); extern int __init at91_aic_of_init(struct device_node *node, struct device_node *parent); +extern int __init at91_aic5_of_init(struct device_node *node, + struct device_node *parent); /* Timer */ diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index 325837a264c..be42cf0e74b 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -26,6 +26,8 @@ #include <linux/of_irq.h> #include <linux/of_gpio.h> +#include <asm/mach/irq.h> + #include <mach/hardware.h> #include <mach/at91_pio.h> @@ -585,15 +587,14 @@ static struct irq_chip gpio_irqchip = { static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) { + struct irq_chip *chip = irq_desc_get_chip(desc); struct irq_data *idata = irq_desc_get_irq_data(desc); - struct irq_chip *chip = irq_data_get_irq_chip(idata); struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata); void __iomem *pio = at91_gpio->regbase; unsigned long isr; int n; - /* temporarily mask (level sensitive) parent IRQ */ - chip->irq_ack(idata); + chained_irq_enter(chip, desc); for (;;) { /* Reading ISR acks pending (edge triggered) GPIO interrupts. * When there none are pending, we're finished unless we need @@ -614,7 +615,7 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) n = find_next_bit(&isr, BITS_PER_LONG, n + 1); } } - chip->irq_unmask(idata); + chained_irq_exit(chip, desc); /* now it may re-trigger */ } diff --git a/arch/arm/mach-at91/include/mach/at91_aic.h b/arch/arm/mach-at91/include/mach/at91_aic.h index 3045781c473..eaea66197fa 100644 --- a/arch/arm/mach-at91/include/mach/at91_aic.h +++ b/arch/arm/mach-at91/include/mach/at91_aic.h @@ -23,12 +23,23 @@ extern void __iomem *at91_aic_base; __raw_readl(at91_aic_base + field) #define at91_aic_write(field, value) \ - __raw_writel(value, at91_aic_base + field); + __raw_writel(value, at91_aic_base + field) #else .extern at91_aic_base #endif +/* Number of irq lines managed by AIC */ +#define NR_AIC_IRQS 32 +#define NR_AIC5_IRQS 128 + +#define AT91_AIC5_SSR 0x0 /* Source Select Register [AIC5] */ +#define AT91_AIC5_INTSEL_MSK (0x7f << 0) /* Interrupt Line Selection Mask */ + +#define AT91_AIC_IRQ_MIN_PRIORITY 0 +#define AT91_AIC_IRQ_MAX_PRIORITY 7 + #define AT91_AIC_SMR(n) ((n) * 4) /* Source Mode Registers 0-31 */ +#define AT91_AIC5_SMR 0x4 /* Source Mode Register [AIC5] */ #define AT91_AIC_PRIOR (7 << 0) /* Priority Level */ #define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */ #define AT91_AIC_SRCTYPE_LOW (0 << 5) @@ -37,29 +48,52 @@ extern void __iomem *at91_aic_base; #define AT91_AIC_SRCTYPE_RISING (3 << 5) #define AT91_AIC_SVR(n) (0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */ +#define AT91_AIC5_SVR 0x8 /* Source Vector Register [AIC5] */ #define AT91_AIC_IVR 0x100 /* Interrupt Vector Register */ +#define AT91_AIC5_IVR 0x10 /* Interrupt Vector Register [AIC5] */ #define AT91_AIC_FVR 0x104 /* Fast Interrupt Vector Register */ +#define AT91_AIC5_FVR 0x14 /* Fast Interrupt Vector Register [AIC5] */ #define AT91_AIC_ISR 0x108 /* Interrupt Status Register */ +#define AT91_AIC5_ISR 0x18 /* Interrupt Status Register [AIC5] */ #define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */ #define AT91_AIC_IPR 0x10c /* Interrupt Pending Register */ +#define AT91_AIC5_IPR0 0x20 /* Interrupt Pending Register 0 [AIC5] */ +#define AT91_AIC5_IPR1 0x24 /* Interrupt Pending Register 1 [AIC5] */ +#define AT91_AIC5_IPR2 0x28 /* Interrupt Pending Register 2 [AIC5] */ +#define AT91_AIC5_IPR3 0x2c /* Interrupt Pending Register 3 [AIC5] */ #define AT91_AIC_IMR 0x110 /* Interrupt Mask Register */ +#define AT91_AIC5_IMR 0x30 /* Interrupt Mask Register [AIC5] */ #define AT91_AIC_CISR 0x114 /* Core Interrupt Status Register */ +#define AT91_AIC5_CISR 0x34 /* Core Interrupt Status Register [AIC5] */ #define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */ #define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */ #define AT91_AIC_IECR 0x120 /* Interrupt Enable Command Register */ +#define AT91_AIC5_IECR 0x40 /* Interrupt Enable Command Register [AIC5] */ #define AT91_AIC_IDCR 0x124 /* Interrupt Disable Command Register */ +#define AT91_AIC5_IDCR 0x44 /* Interrupt Disable Command Register [AIC5] */ #define AT91_AIC_ICCR 0x128 /* Interrupt Clear Command Register */ +#define AT91_AIC5_ICCR 0x48 /* Interrupt Clear Command Register [AIC5] */ #define AT91_AIC_ISCR 0x12c /* Interrupt Set Command Register */ +#define AT91_AIC5_ISCR 0x4c /* Interrupt Set Command Register [AIC5] */ #define AT91_AIC_EOICR 0x130 /* End of Interrupt Command Register */ +#define AT91_AIC5_EOICR 0x38 /* End of Interrupt Command Register [AIC5] */ #define AT91_AIC_SPU 0x134 /* Spurious Interrupt Vector Register */ +#define AT91_AIC5_SPU 0x3c /* Spurious Interrupt Vector Register [AIC5] */ #define AT91_AIC_DCR 0x138 /* Debug Control Register */ +#define AT91_AIC5_DCR 0x6c /* Debug Control Register [AIC5] */ #define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */ #define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */ #define AT91_AIC_FFER 0x140 /* Fast Forcing Enable Register [SAM9 only] */ +#define AT91_AIC5_FFER 0x50 /* Fast Forcing Enable Register [AIC5] */ #define AT91_AIC_FFDR 0x144 /* Fast Forcing Disable Register [SAM9 only] */ +#define AT91_AIC5_FFDR 0x54 /* Fast Forcing Disable Register [AIC5] */ #define AT91_AIC_FFSR 0x148 /* Fast Forcing Status Register [SAM9 only] */ +#define AT91_AIC5_FFSR 0x58 /* Fast Forcing Status Register [AIC5] */ + +void at91_aic_handle_irq(struct pt_regs *regs); +void at91_aic5_handle_irq(struct pt_regs *regs); #endif diff --git a/arch/arm/mach-at91/include/mach/at91_spi.h b/arch/arm/mach-at91/include/mach/at91_spi.h deleted file mode 100644 index 2f6ba0c5636..00000000000 --- a/arch/arm/mach-at91/include/mach/at91_spi.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_spi.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Serial Peripheral Interface (SPI) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_SPI_H -#define AT91_SPI_H - -#define AT91_SPI_CR 0x00 /* Control Register */ -#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */ -#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */ -#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */ -#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ - -#define AT91_SPI_MR 0x04 /* Mode Register */ -#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */ -#define AT91_SPI_PS (1 << 1) /* Peripheral Select */ -#define AT91_SPI_PS_FIXED (0 << 1) -#define AT91_SPI_PS_VARIABLE (1 << 1) -#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */ -#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */ -#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */ -#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */ -#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ -#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */ - -#define AT91_SPI_RDR 0x08 /* Receive Data Register */ -#define AT91_SPI_RD (0xffff << 0) /* Receive Data */ -#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ - -#define AT91_SPI_TDR 0x0c /* Transmit Data Register */ -#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */ -#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ -#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ - -#define AT91_SPI_SR 0x10 /* Status Register */ -#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */ -#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */ -#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */ -#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */ -#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */ -#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */ -#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */ -#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */ -#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */ -#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */ -#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */ - -#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */ -#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */ -#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */ - -#define AT91_SPI_CSR(n) (0x30 + ((n) * 4)) /* Chip Select Registers 0-3 */ -#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */ -#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */ -#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */ -#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */ -#define AT91_SPI_BITS_8 (0 << 4) -#define AT91_SPI_BITS_9 (1 << 4) -#define AT91_SPI_BITS_10 (2 << 4) -#define AT91_SPI_BITS_11 (3 << 4) -#define AT91_SPI_BITS_12 (4 << 4) -#define AT91_SPI_BITS_13 (5 << 4) -#define AT91_SPI_BITS_14 (6 << 4) -#define AT91_SPI_BITS_15 (7 << 4) -#define AT91_SPI_BITS_16 (8 << 4) -#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */ -#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */ -#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91_ssc.h b/arch/arm/mach-at91/include/mach/at91_ssc.h deleted file mode 100644 index a81114c11c7..00000000000 --- a/arch/arm/mach-at91/include/mach/at91_ssc.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_ssc.h - * - * Copyright (C) SAN People - * - * Serial Synchronous Controller (SSC) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_SSC_H -#define AT91_SSC_H - -#define AT91_SSC_CR 0x00 /* Control Register */ -#define AT91_SSC_RXEN (1 << 0) /* Receive Enable */ -#define AT91_SSC_RXDIS (1 << 1) /* Receive Disable */ -#define AT91_SSC_TXEN (1 << 8) /* Transmit Enable */ -#define AT91_SSC_TXDIS (1 << 9) /* Transmit Disable */ -#define AT91_SSC_SWRST (1 << 15) /* Software Reset */ - -#define AT91_SSC_CMR 0x04 /* Clock Mode Register */ -#define AT91_SSC_CMR_DIV (0xfff << 0) /* Clock Divider */ - -#define AT91_SSC_RCMR 0x10 /* Receive Clock Mode Register */ -#define AT91_SSC_CKS (3 << 0) /* Clock Selection */ -#define AT91_SSC_CKS_DIV (0 << 0) -#define AT91_SSC_CKS_CLOCK (1 << 0) -#define AT91_SSC_CKS_PIN (2 << 0) -#define AT91_SSC_CKO (7 << 2) /* Clock Output Mode Selection */ -#define AT91_SSC_CKO_NONE (0 << 2) -#define AT91_SSC_CKO_CONTINUOUS (1 << 2) -#define AT91_SSC_CKI (1 << 5) /* Clock Inversion */ -#define AT91_SSC_CKI_FALLING (0 << 5) -#define AT91_SSC_CK_RISING (1 << 5) -#define AT91_SSC_CKG (1 << 6) /* Receive Clock Gating Selection [AT91SAM9261 only] */ -#define AT91_SSC_CKG_NONE (0 << 6) -#define AT91_SSC_CKG_RFLOW (1 << 6) -#define AT91_SSC_CKG_RFHIGH (2 << 6) -#define AT91_SSC_START (0xf << 8) /* Start Selection */ -#define AT91_SSC_START_CONTINUOUS (0 << 8) -#define AT91_SSC_START_TX_RX (1 << 8) -#define AT91_SSC_START_LOW_RF (2 << 8) -#define AT91_SSC_START_HIGH_RF (3 << 8) -#define AT91_SSC_START_FALLING_RF (4 << 8) -#define AT91_SSC_START_RISING_RF (5 << 8) -#define AT91_SSC_START_LEVEL_RF (6 << 8) -#define AT91_SSC_START_EDGE_RF (7 << 8) -#define AT91_SSC_STOP (1 << 12) /* Receive Stop Selection [AT91SAM9261 only] */ -#define AT91_SSC_STTDLY (0xff << 16) /* Start Delay */ -#define AT91_SSC_PERIOD (0xff << 24) /* Period Divider Selection */ - -#define AT91_SSC_RFMR 0x14 /* Receive Frame Mode Register */ -#define AT91_SSC_DATALEN (0x1f << 0) /* Data Length */ -#define AT91_SSC_LOOP (1 << 5) /* Loop Mode */ -#define AT91_SSC_MSBF (1 << 7) /* Most Significant Bit First */ -#define AT91_SSC_DATNB (0xf << 8) /* Data Number per Frame */ -#define AT91_SSC_FSLEN (0xf << 16) /* Frame Sync Length */ -#define AT91_SSC_FSOS (7 << 20) /* Frame Sync Output Selection */ -#define AT91_SSC_FSOS_NONE (0 << 20) -#define AT91_SSC_FSOS_NEGATIVE (1 << 20) -#define AT91_SSC_FSOS_POSITIVE (2 << 20) -#define AT91_SSC_FSOS_LOW (3 << 20) -#define AT91_SSC_FSOS_HIGH (4 << 20) -#define AT91_SSC_FSOS_TOGGLE (5 << 20) -#define AT91_SSC_FSEDGE (1 << 24) /* Frame Sync Edge Detection */ -#define AT91_SSC_FSEDGE_POSITIVE (0 << 24) -#define AT91_SSC_FSEDGE_NEGATIVE (1 << 24) - -#define AT91_SSC_TCMR 0x18 /* Transmit Clock Mode Register */ -#define AT91_SSC_TFMR 0x1c /* Transmit Fram Mode Register */ -#define AT91_SSC_DATDEF (1 << 5) /* Data Default Value */ -#define AT91_SSC_FSDEN (1 << 23) /* Frame Sync Data Enable */ - -#define AT91_SSC_RHR 0x20 /* Receive Holding Register */ -#define AT91_SSC_THR 0x24 /* Transmit Holding Register */ -#define AT91_SSC_RSHR 0x30 /* Receive Sync Holding Register */ -#define AT91_SSC_TSHR 0x34 /* Transmit Sync Holding Register */ - -#define AT91_SSC_RC0R 0x38 /* Receive Compare 0 Register [AT91SAM9261 only] */ -#define AT91_SSC_RC1R 0x3c /* Receive Compare 1 Register [AT91SAM9261 only] */ - -#define AT91_SSC_SR 0x40 /* Status Register */ -#define AT91_SSC_TXRDY (1 << 0) /* Transmit Ready */ -#define AT91_SSC_TXEMPTY (1 << 1) /* Transmit Empty */ -#define AT91_SSC_ENDTX (1 << 2) /* End of Transmission */ -#define AT91_SSC_TXBUFE (1 << 3) /* Transmit Buffer Empty */ -#define AT91_SSC_RXRDY (1 << 4) /* Receive Ready */ -#define AT91_SSC_OVRUN (1 << 5) /* Receive Overrun */ -#define AT91_SSC_ENDRX (1 << 6) /* End of Reception */ -#define AT91_SSC_RXBUFF (1 << 7) /* Receive Buffer Full */ -#define AT91_SSC_CP0 (1 << 8) /* Compare 0 [AT91SAM9261 only] */ -#define AT91_SSC_CP1 (1 << 9) /* Compare 1 [AT91SAM9261 only] */ -#define AT91_SSC_TXSYN (1 << 10) /* Transmit Sync */ -#define AT91_SSC_RXSYN (1 << 11) /* Receive Sync */ -#define AT91_SSC_TXENA (1 << 16) /* Transmit Enable */ -#define AT91_SSC_RXENA (1 << 17) /* Receive Enable */ - -#define AT91_SSC_IER 0x44 /* Interrupt Enable Register */ -#define AT91_SSC_IDR 0x48 /* Interrupt Disable Register */ -#define AT91_SSC_IMR 0x4c /* Interrupt Mask Register */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S deleted file mode 100644 index 903bf205a33..00000000000 --- a/arch/arm/mach-at91/include/mach/entry-macro.S +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/entry-macro.S - * - * Copyright (C) 2003-2005 SAN People - * - * Low-level IRQ helper macros for AT91RM9200 platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <mach/hardware.h> -#include <mach/at91_aic.h> - - .macro get_irqnr_preamble, base, tmp - ldr \base, =at91_aic_base @ base virtual address of AIC peripheral - ldr \base, [\base] - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt) - ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number - teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt - streq \tmp, [\base, #AT91_AIC_EOICR] @ not going to be handled further, then ACK it now. - .endm - diff --git a/arch/arm/mach-at91/include/mach/irqs.h b/arch/arm/mach-at91/include/mach/irqs.h deleted file mode 100644 index ac8b7dfc85e..00000000000 --- a/arch/arm/mach-at91/include/mach/irqs.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/irqs.h - * - * Copyright (C) 2004 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include <linux/io.h> -#include <mach/at91_aic.h> - -#define NR_AIC_IRQS 32 - - -/* - * Acknowledge interrupt with AIC after interrupt has been handled. - * (by kernel/irq.c) - */ -#define irq_finish(irq) do { at91_aic_write(AT91_AIC_EOICR, 0); } while (0) - - -/* - * IRQ interrupt symbols are the AT91xxx_ID_* symbols - * for IRQs handled directly through the AIC, or else the AT91_PIN_* - * symbols in gpio.h for ones handled indirectly as GPIOs. - * We make provision for 5 banks of GPIO. - */ -#define NR_IRQS (NR_AIC_IRQS + (5 * 32)) - -/* FIQ is AIC source 0. */ -#define FIQ_START AT91_ID_FIQ - -#endif diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index cfcfcbe3626..1e02c0e49dc 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -23,6 +23,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/mm.h> +#include <linux/bitmap.h> #include <linux/types.h> #include <linux/irq.h> #include <linux/of.h> @@ -30,38 +31,218 @@ #include <linux/of_irq.h> #include <linux/irqdomain.h> #include <linux/err.h> +#include <linux/slab.h> #include <mach/hardware.h> #include <asm/irq.h> #include <asm/setup.h> +#include <asm/exception.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/map.h> +#include <mach/at91_aic.h> + void __iomem *at91_aic_base; static struct irq_domain *at91_aic_domain; static struct device_node *at91_aic_np; +static unsigned int n_irqs = NR_AIC_IRQS; +static unsigned long at91_aic_caps = 0; + +/* AIC5 introduces a Source Select Register */ +#define AT91_AIC_CAP_AIC5 (1 << 0) +#define has_aic5() (at91_aic_caps & AT91_AIC_CAP_AIC5) + +#ifdef CONFIG_PM + +static unsigned long *wakeups; +static unsigned long *backups; + +#define set_backup(bit) set_bit(bit, backups) +#define clear_backup(bit) clear_bit(bit, backups) + +static int at91_aic_pm_init(void) +{ + backups = kzalloc(BITS_TO_LONGS(n_irqs) * sizeof(*backups), GFP_KERNEL); + if (!backups) + return -ENOMEM; + + wakeups = kzalloc(BITS_TO_LONGS(n_irqs) * sizeof(*backups), GFP_KERNEL); + if (!wakeups) { + kfree(backups); + return -ENOMEM; + } + + return 0; +} + +static int at91_aic_set_wake(struct irq_data *d, unsigned value) +{ + if (unlikely(d->hwirq >= n_irqs)) + return -EINVAL; + + if (value) + set_bit(d->hwirq, wakeups); + else + clear_bit(d->hwirq, wakeups); + + return 0; +} + +void at91_irq_suspend(void) +{ + int i = 0, bit; + + if (has_aic5()) { + /* disable enabled irqs */ + while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) { + at91_aic_write(AT91_AIC5_SSR, + bit & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IDCR, 1); + i = bit; + } + /* enable wakeup irqs */ + i = 0; + while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) { + at91_aic_write(AT91_AIC5_SSR, + bit & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IECR, 1); + i = bit; + } + } else { + at91_aic_write(AT91_AIC_IDCR, *backups); + at91_aic_write(AT91_AIC_IECR, *wakeups); + } +} + +void at91_irq_resume(void) +{ + int i = 0, bit; + + if (has_aic5()) { + /* disable wakeup irqs */ + while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) { + at91_aic_write(AT91_AIC5_SSR, + bit & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IDCR, 1); + i = bit; + } + /* enable irqs disabled for suspend */ + i = 0; + while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) { + at91_aic_write(AT91_AIC5_SSR, + bit & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IECR, 1); + i = bit; + } + } else { + at91_aic_write(AT91_AIC_IDCR, *wakeups); + at91_aic_write(AT91_AIC_IECR, *backups); + } +} + +#else +static inline int at91_aic_pm_init(void) +{ + return 0; +} + +#define set_backup(bit) +#define clear_backup(bit) +#define at91_aic_set_wake NULL + +#endif /* CONFIG_PM */ + +asmlinkage void __exception_irq_entry +at91_aic_handle_irq(struct pt_regs *regs) +{ + u32 irqnr; + u32 irqstat; + + irqnr = at91_aic_read(AT91_AIC_IVR); + irqstat = at91_aic_read(AT91_AIC_ISR); + + /* + * ISR value is 0 when there is no current interrupt or when there is + * a spurious interrupt + */ + if (!irqstat) + at91_aic_write(AT91_AIC_EOICR, 0); + else + handle_IRQ(irqnr, regs); +} + +asmlinkage void __exception_irq_entry +at91_aic5_handle_irq(struct pt_regs *regs) +{ + u32 irqnr; + u32 irqstat; + + irqnr = at91_aic_read(AT91_AIC5_IVR); + irqstat = at91_aic_read(AT91_AIC5_ISR); + + if (!irqstat) + at91_aic_write(AT91_AIC5_EOICR, 0); + else + handle_IRQ(irqnr, regs); +} static void at91_aic_mask_irq(struct irq_data *d) { /* Disable interrupt on AIC */ at91_aic_write(AT91_AIC_IDCR, 1 << d->hwirq); + /* Update ISR cache */ + clear_backup(d->hwirq); +} + +static void __maybe_unused at91_aic5_mask_irq(struct irq_data *d) +{ + /* Disable interrupt on AIC5 */ + at91_aic_write(AT91_AIC5_SSR, d->hwirq & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IDCR, 1); + /* Update ISR cache */ + clear_backup(d->hwirq); } static void at91_aic_unmask_irq(struct irq_data *d) { /* Enable interrupt on AIC */ at91_aic_write(AT91_AIC_IECR, 1 << d->hwirq); + /* Update ISR cache */ + set_backup(d->hwirq); +} + +static void __maybe_unused at91_aic5_unmask_irq(struct irq_data *d) +{ + /* Enable interrupt on AIC5 */ + at91_aic_write(AT91_AIC5_SSR, d->hwirq & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IECR, 1); + /* Update ISR cache */ + set_backup(d->hwirq); } -unsigned int at91_extern_irq; +static void at91_aic_eoi(struct irq_data *d) +{ + /* + * Mark end-of-interrupt on AIC, the controller doesn't care about + * the value written. Moreover it's a write-only register. + */ + at91_aic_write(AT91_AIC_EOICR, 0); +} -#define is_extern_irq(hwirq) ((1 << (hwirq)) & at91_extern_irq) +static void __maybe_unused at91_aic5_eoi(struct irq_data *d) +{ + at91_aic_write(AT91_AIC5_EOICR, 0); +} -static int at91_aic_set_type(struct irq_data *d, unsigned type) +unsigned long *at91_extern_irq; + +#define is_extern_irq(hwirq) test_bit(hwirq, at91_extern_irq) + +static int at91_aic_compute_srctype(struct irq_data *d, unsigned type) { - unsigned int smr, srctype; + int srctype; switch (type) { case IRQ_TYPE_LEVEL_HIGH: @@ -74,65 +255,51 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type) if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */ srctype = AT91_AIC_SRCTYPE_LOW; else - return -EINVAL; + srctype = -EINVAL; break; case IRQ_TYPE_EDGE_FALLING: if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */ srctype = AT91_AIC_SRCTYPE_FALLING; else - return -EINVAL; + srctype = -EINVAL; break; default: - return -EINVAL; + srctype = -EINVAL; } - smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) & ~AT91_AIC_SRCTYPE; - at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype); - return 0; + return srctype; } -#ifdef CONFIG_PM - -static u32 wakeups; -static u32 backups; - -static int at91_aic_set_wake(struct irq_data *d, unsigned value) +static int at91_aic_set_type(struct irq_data *d, unsigned type) { - if (unlikely(d->hwirq >= NR_AIC_IRQS)) - return -EINVAL; + unsigned int smr; + int srctype; - if (value) - wakeups |= (1 << d->hwirq); - else - wakeups &= ~(1 << d->hwirq); + srctype = at91_aic_compute_srctype(d, type); + if (srctype < 0) + return srctype; - return 0; -} - -void at91_irq_suspend(void) -{ - backups = at91_aic_read(AT91_AIC_IMR); - at91_aic_write(AT91_AIC_IDCR, backups); - at91_aic_write(AT91_AIC_IECR, wakeups); -} + if (has_aic5()) { + at91_aic_write(AT91_AIC5_SSR, + d->hwirq & AT91_AIC5_INTSEL_MSK); + smr = at91_aic_read(AT91_AIC5_SMR) & ~AT91_AIC_SRCTYPE; + at91_aic_write(AT91_AIC5_SMR, smr | srctype); + } else { + smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) + & ~AT91_AIC_SRCTYPE; + at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype); + } -void at91_irq_resume(void) -{ - at91_aic_write(AT91_AIC_IDCR, wakeups); - at91_aic_write(AT91_AIC_IECR, backups); + return 0; } -#else -#define at91_aic_set_wake NULL -#endif - static struct irq_chip at91_aic_chip = { .name = "AIC", - .irq_ack = at91_aic_mask_irq, .irq_mask = at91_aic_mask_irq, .irq_unmask = at91_aic_unmask_irq, .irq_set_type = at91_aic_set_type, .irq_set_wake = at91_aic_set_wake, + .irq_eoi = at91_aic_eoi, }; static void __init at91_aic_hw_init(unsigned int spu_vector) @@ -161,41 +328,172 @@ static void __init at91_aic_hw_init(unsigned int spu_vector) at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF); } +static void __init __maybe_unused at91_aic5_hw_init(unsigned int spu_vector) +{ + int i; + + /* + * Perform 8 End Of Interrupt Command to make sure AIC + * will not Lock out nIRQ + */ + for (i = 0; i < 8; i++) + at91_aic_write(AT91_AIC5_EOICR, 0); + + /* + * Spurious Interrupt ID in Spurious Vector Register. + * When there is no current interrupt, the IRQ Vector Register + * reads the value stored in AIC_SPU + */ + at91_aic_write(AT91_AIC5_SPU, spu_vector); + + /* No debugging in AIC: Debug (Protect) Control Register */ + at91_aic_write(AT91_AIC5_DCR, 0); + + /* Disable and clear all interrupts initially */ + for (i = 0; i < n_irqs; i++) { + at91_aic_write(AT91_AIC5_SSR, i & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IDCR, 1); + at91_aic_write(AT91_AIC5_ICCR, 1); + } +} + #if defined(CONFIG_OF) +static unsigned int *at91_aic_irq_priorities; + static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) { /* Put virq number in Source Vector Register */ at91_aic_write(AT91_AIC_SVR(hw), virq); - /* Active Low interrupt, without priority */ - at91_aic_write(AT91_AIC_SMR(hw), AT91_AIC_SRCTYPE_LOW); + /* Active Low interrupt, with priority */ + at91_aic_write(AT91_AIC_SMR(hw), + AT91_AIC_SRCTYPE_LOW | at91_aic_irq_priorities[hw]); - irq_set_chip_and_handler(virq, &at91_aic_chip, handle_level_irq); + irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq); set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); return 0; } +static int at91_aic5_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + at91_aic_write(AT91_AIC5_SSR, hw & AT91_AIC5_INTSEL_MSK); + + /* Put virq number in Source Vector Register */ + at91_aic_write(AT91_AIC5_SVR, virq); + + /* Active Low interrupt, with priority */ + at91_aic_write(AT91_AIC5_SMR, + AT91_AIC_SRCTYPE_LOW | at91_aic_irq_priorities[hw]); + + irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq); + set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); + + return 0; +} + +static int at91_aic_irq_domain_xlate(struct irq_domain *d, struct device_node *ctrlr, + const u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_type) +{ + if (WARN_ON(intsize < 3)) + return -EINVAL; + if (WARN_ON(intspec[0] >= n_irqs)) + return -EINVAL; + if (WARN_ON((intspec[2] < AT91_AIC_IRQ_MIN_PRIORITY) + || (intspec[2] > AT91_AIC_IRQ_MAX_PRIORITY))) + return -EINVAL; + + *out_hwirq = intspec[0]; + *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK; + at91_aic_irq_priorities[*out_hwirq] = intspec[2]; + + return 0; +} + static struct irq_domain_ops at91_aic_irq_ops = { .map = at91_aic_irq_map, - .xlate = irq_domain_xlate_twocell, + .xlate = at91_aic_irq_domain_xlate, }; -int __init at91_aic_of_init(struct device_node *node, - struct device_node *parent) +int __init at91_aic_of_common_init(struct device_node *node, + struct device_node *parent) { + struct property *prop; + const __be32 *p; + u32 val; + + at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs) + * sizeof(*at91_extern_irq), GFP_KERNEL); + if (!at91_extern_irq) + return -ENOMEM; + + if (at91_aic_pm_init()) { + kfree(at91_extern_irq); + return -ENOMEM; + } + + at91_aic_irq_priorities = kzalloc(n_irqs + * sizeof(*at91_aic_irq_priorities), + GFP_KERNEL); + if (!at91_aic_irq_priorities) + return -ENOMEM; + at91_aic_base = of_iomap(node, 0); at91_aic_np = node; - at91_aic_domain = irq_domain_add_linear(at91_aic_np, NR_AIC_IRQS, + at91_aic_domain = irq_domain_add_linear(at91_aic_np, n_irqs, &at91_aic_irq_ops, NULL); if (!at91_aic_domain) panic("Unable to add AIC irq domain (DT)\n"); + of_property_for_each_u32(node, "atmel,external-irqs", prop, p, val) { + if (val >= n_irqs) + pr_warn("AIC: external irq %d >= %d skip it\n", + val, n_irqs); + else + set_bit(val, at91_extern_irq); + } + irq_set_default_host(at91_aic_domain); - at91_aic_hw_init(NR_AIC_IRQS); + return 0; +} + +int __init at91_aic_of_init(struct device_node *node, + struct device_node *parent) +{ + int err; + + err = at91_aic_of_common_init(node, parent); + if (err) + return err; + + at91_aic_hw_init(n_irqs); + + return 0; +} + +int __init at91_aic5_of_init(struct device_node *node, + struct device_node *parent) +{ + int err; + + at91_aic_caps |= AT91_AIC_CAP_AIC5; + n_irqs = NR_AIC5_IRQS; + at91_aic_chip.irq_ack = at91_aic5_mask_irq; + at91_aic_chip.irq_mask = at91_aic5_mask_irq; + at91_aic_chip.irq_unmask = at91_aic5_unmask_irq; + at91_aic_chip.irq_eoi = at91_aic5_eoi; + at91_aic_irq_ops.map = at91_aic5_irq_map; + + err = at91_aic_of_common_init(node, parent); + if (err) + return err; + + at91_aic5_hw_init(n_irqs); return 0; } @@ -204,22 +502,25 @@ int __init at91_aic_of_init(struct device_node *node, /* * Initialize the AIC interrupt controller. */ -void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS]) +void __init at91_aic_init(unsigned int *priority) { unsigned int i; int irq_base; + if (at91_aic_pm_init()) + panic("Unable to allocate bit maps\n"); + at91_aic_base = ioremap(AT91_AIC, 512); if (!at91_aic_base) panic("Unable to ioremap AIC registers\n"); /* Add irq domain for AIC */ - irq_base = irq_alloc_descs(-1, 0, NR_AIC_IRQS, 0); + irq_base = irq_alloc_descs(-1, 0, n_irqs, 0); if (irq_base < 0) { WARN(1, "Cannot allocate irq_descs, assuming pre-allocated\n"); irq_base = 0; } - at91_aic_domain = irq_domain_add_legacy(at91_aic_np, NR_AIC_IRQS, + at91_aic_domain = irq_domain_add_legacy(at91_aic_np, n_irqs, irq_base, 0, &irq_domain_simple_ops, NULL); @@ -232,15 +533,14 @@ void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS]) * The IVR is used by macro get_irqnr_and_base to read and verify. * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred. */ - for (i = 0; i < NR_AIC_IRQS; i++) { + for (i = 0; i < n_irqs; i++) { /* Put hardware irq number in Source Vector Register: */ - at91_aic_write(AT91_AIC_SVR(i), i); + at91_aic_write(AT91_AIC_SVR(i), NR_IRQS_LEGACY + i); /* Active Low interrupt, with the specified priority */ at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]); - - irq_set_chip_and_handler(i, &at91_aic_chip, handle_level_irq); + irq_set_chip_and_handler(NR_IRQS_LEGACY + i, &at91_aic_chip, handle_fasteoi_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } - at91_aic_hw_init(NR_AIC_IRQS); + at91_aic_hw_init(n_irqs); } diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 1bfaad62873..2c2d86505a5 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -25,6 +25,7 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> +#include <mach/at91_aic.h> #include <mach/at91_pmc.h> #include <mach/cpu.h> diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index c965fd8eb31..f15293bd797 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -26,7 +26,6 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/sched.h> -#include <linux/timex.h> #include <asm/sizes.h> #include <mach/hardware.h> @@ -188,7 +187,6 @@ static struct irqaction clps711x_timer_irq = { static void __init clps711x_timer_init(void) { - struct timespec tv; unsigned int syscon; syscon = clps_readl(SYSCON1); @@ -198,10 +196,6 @@ static void __init clps711x_timer_init(void) clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */ setup_irq(IRQ_TC2OI, &clps711x_timer_irq); - - tv.tv_nsec = 0; - tv.tv_sec = clps_readl(RTCDR); - do_settimeofday(&tv); } struct sys_timer clps711x_timer = { diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h index 3a032a67725..fc0e028d940 100644 --- a/arch/arm/mach-clps711x/include/mach/memory.h +++ b/arch/arm/mach-clps711x/include/mach/memory.h @@ -25,26 +25,6 @@ */ #define PLAT_PHYS_OFFSET UL(0xc0000000) -#if !defined(CONFIG_ARCH_CDB89712) && !defined (CONFIG_ARCH_AUTCPU12) - -#define __virt_to_bus(x) ((x) - PAGE_OFFSET) -#define __bus_to_virt(x) ((x) + PAGE_OFFSET) -#define __pfn_to_bus(x) (__pfn_to_phys(x) - PHYS_OFFSET) -#define __bus_to_pfn(x) __phys_to_pfn((x) + PHYS_OFFSET) - -#endif - - -/* - * Like the SA1100, the EDB7211 has a large gap between physical RAM - * banks. In 2.2, the Psion (CL-PS7110) port added custom support for - * discontiguous physical memory. In 2.4, we can use the standard - * Linux NUMA support. - * - * This is not necessary for EP7211 implementations with only one used - * memory bank. For those systems, simply undefine CONFIG_DISCONTIGMEM. - */ - /* * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211 * uses only one of the two banks (bank #1). However, even within @@ -54,23 +34,6 @@ * them, so we use 24 for the node max shift to get 16MB node sizes. */ -/* - * Because of the wide memory address space between physical RAM banks on the - * SA1100, it's much more convenient to use Linux's NUMA support to implement - * our memory map representation. Assuming all memory nodes have equal access - * characteristics, we then have generic discontiguous memory support. - * - * Of course, all this isn't mandatory for SA1100 implementations with only - * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM. - * - * The nodes are matched with the physical memory bank addresses which are - * incidentally the same as virtual addresses. - * - * node 0: 0xc0000000 - 0xc7ffffff - * node 1: 0xc8000000 - 0xcfffffff - * node 2: 0xd0000000 - 0xd7ffffff - * node 3: 0xd8000000 - 0xdfffffff - */ #define SECTION_SIZE_BITS 24 #define MAX_PHYSMEM_BITS 32 diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index 42ee8f33eaf..f266d90b9ef 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -86,17 +86,7 @@ static void __init p720t_map_io(void) iotable_init(p720t_io_desc, ARRAY_SIZE(p720t_io_desc)); } -MACHINE_START(P720T, "ARM-Prospector720T") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .fixup = fixup_p720t, - .map_io = p720t_map_io, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, - .restart = clps711x_restart, -MACHINE_END - -static int p720t_hw_init(void) +static void __init p720t_init_early(void) { /* * Power down as much as possible in case we don't @@ -111,13 +101,19 @@ static int p720t_hw_init(void) PLD_CODEC = 0; PLD_TCH = 0; PLD_SPI = 0; -#ifndef CONFIG_DEBUG_LL - PLD_COM2 = 0; - PLD_COM1 = 0; -#endif - - return 0; + if (!IS_ENABLED(CONFIG_DEBUG_LL)) { + PLD_COM2 = 0; + PLD_COM1 = 0; + } } -__initcall(p720t_hw_init); - +MACHINE_START(P720T, "ARM-Prospector720T") + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .atag_offset = 0x100, + .fixup = fixup_p720t, + .init_early = p720t_init_early, + .map_io = p720t_map_io, + .init_irq = clps711x_init_irq, + .timer = &clps711x_timer, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h deleted file mode 100644 index b9bf3d6a442..00000000000 --- a/arch/arm/mach-davinci/include/mach/dm365.h +++ /dev/null @@ -1 +0,0 @@ -/* empty, remove once unused */ diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h deleted file mode 100644 index b9bf3d6a442..00000000000 --- a/arch/arm/mach-davinci/include/mach/dm646x.h +++ /dev/null @@ -1 +0,0 @@ -/* empty, remove once unused */ diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 742edd3bbec..0ec1a91388c 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -712,31 +712,6 @@ static int __init exynos4_l2x0_cache_init(void) early_initcall(exynos4_l2x0_cache_init); #endif -static int __init exynos5_l2_cache_init(void) -{ - unsigned int val; - - if (!soc_is_exynos5250()) - return 0; - - asm volatile("mrc p15, 0, %0, c1, c0, 0\n" - "bic %0, %0, #(1 << 2)\n" /* cache disable */ - "mcr p15, 0, %0, c1, c0, 0\n" - "mrc p15, 1, %0, c9, c0, 2\n" - : "=r"(val)); - - val |= (1 << 9) | (1 << 5) | (2 << 6) | (2 << 0); - - asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(val)); - asm volatile("mrc p15, 0, %0, c1, c0, 0\n" - "orr %0, %0, #(1 << 2)\n" /* cache enable */ - "mcr p15, 0, %0, c1, c0, 0\n" - : : "r"(val)); - - return 0; -} -early_initcall(exynos5_l2_cache_init); - static int __init exynos_init(void) { printk(KERN_INFO "EXYNOS: Initializing architecture\n"); diff --git a/arch/arm/mach-exynos/include/mach/spi-clocks.h b/arch/arm/mach-exynos/include/mach/spi-clocks.h deleted file mode 100644 index c71a5fba6a8..00000000000 --- a/arch/arm/mach-exynos/include/mach/spi-clocks.h +++ /dev/null @@ -1,16 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/spi-clocks.h - * - * Copyright (C) 2011 Samsung Electronics Co. Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_SPI_CLKS_H -#define __ASM_ARCH_SPI_CLKS_H __FILE__ - -/* Must source from SCLK_SPI */ -#define EXYNOS_SPI_SRCCLK_SCLK 0 - -#endif /* __ASM_ARCH_SPI_CLKS_H */ diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 656f8fc9add..f3b328d0aff 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -50,7 +50,6 @@ #include <plat/gpio-cfg.h> #include <plat/iic.h> #include <plat/mfc.h> -#include <plat/pd.h> #include <plat/fimc-core.h> #include <plat/camport.h> #include <plat/mipi_csis.h> diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index f5572be9d7b..873c708fd34 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -38,7 +38,6 @@ #include <plat/clock.h> #include <plat/gpio-cfg.h> #include <plat/backlight.h> -#include <plat/pd.h> #include <plat/fb.h> #include <plat/mfc.h> diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 262e9e446a9..5fb209c4a59 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -34,7 +34,6 @@ #include <plat/keypad.h> #include <plat/sdhci.h> #include <plat/iic.h> -#include <plat/pd.h> #include <plat/gpio-cfg.h> #include <plat/backlight.h> #include <plat/mfc.h> diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index cd92fa86ba4..68719f57dce 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -39,7 +39,6 @@ #include <plat/fb.h> #include <plat/mfc.h> #include <plat/sdhci.h> -#include <plat/pd.h> #include <plat/regs-fb-v4.h> #include <plat/fimc-core.h> #include <plat/s5p-time.h> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index eff4db5de0d..0da882a3c06 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -158,7 +158,6 @@ config MACH_MX25_3DS select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMXDI_RTC select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index e1a17ac7b3b..abb42e7453a 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -388,12 +388,9 @@ int __init mx6q_clocks_init(void) pr_err("i.MX6q clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); - clk_register_clkdev(clk[mmdc_ch0_axi], NULL, "mmdc_ch0_axi"); - clk_register_clkdev(clk[mmdc_ch1_axi], NULL, "mmdc_ch1_axi"); clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); clk_register_clkdev(clk[twd], NULL, "smp_twd"); - clk_register_clkdev(clk[usboh3], NULL, "usboh3"); clk_register_clkdev(clk[uart_serial], "per", "2020000.serial"); clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial"); clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial"); diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h index 2628e0c474d..93ece55f75d 100644 --- a/arch/arm/mach-imx/devices-imx21.h +++ b/arch/arm/mach-imx/devices-imx21.h @@ -14,7 +14,7 @@ extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data; imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata) extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data; -#define imx21_add_imx2_wdt(pdata) \ +#define imx21_add_imx2_wdt() \ imx_add_imx2_wdt(&imx21_imx2_wdt_data) extern const struct imx_imx_fb_data imx21_imx_fb_data; @@ -50,7 +50,7 @@ extern const struct imx_mxc_nand_data imx21_mxc_nand_data; imx_add_mxc_nand(&imx21_mxc_nand_data, pdata) extern const struct imx_mxc_w1_data imx21_mxc_w1_data; -#define imx21_add_mxc_w1(pdata) \ +#define imx21_add_mxc_w1() \ imx_add_mxc_w1(&imx21_mxc_w1_data) extern const struct imx_spi_imx_data imx21_cspi_data[]; diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h index efa0761c508..f8e03dd1f11 100644 --- a/arch/arm/mach-imx/devices-imx25.h +++ b/arch/arm/mach-imx/devices-imx25.h @@ -24,11 +24,11 @@ extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data; imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata) extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data; -#define imx25_add_imxdi_rtc(pdata) \ +#define imx25_add_imxdi_rtc() \ imx_add_imxdi_rtc(&imx25_imxdi_rtc_data) extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data; -#define imx25_add_imx2_wdt(pdata) \ +#define imx25_add_imx2_wdt() \ imx_add_imx2_wdt(&imx25_imx2_wdt_data) extern const struct imx_imx_fb_data imx25_imx_fb_data; diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 28537a5d904..436c5720fe6 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -18,7 +18,7 @@ extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data; imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata) extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data; -#define imx27_add_imx2_wdt(pdata) \ +#define imx27_add_imx2_wdt() \ imx_add_imx2_wdt(&imx27_imx2_wdt_data) extern const struct imx_imx_fb_data imx27_imx_fb_data; @@ -50,7 +50,7 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[]; extern const struct imx_mx2_camera_data imx27_mx2_camera_data; #define imx27_add_mx2_camera(pdata) \ imx_add_mx2_camera(&imx27_mx2_camera_data, pdata) -#define imx27_add_mx2_emmaprp(pdata) \ +#define imx27_add_mx2_emmaprp() \ imx_add_mx2_emmaprp(&imx27_mx2_camera_data) extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data; @@ -69,7 +69,7 @@ extern const struct imx_mxc_nand_data imx27_mxc_nand_data; imx_add_mxc_nand(&imx27_mxc_nand_data, pdata) extern const struct imx_mxc_w1_data imx27_mxc_w1_data; -#define imx27_add_mxc_w1(pdata) \ +#define imx27_add_mxc_w1() \ imx_add_mxc_w1(&imx27_mxc_w1_data) extern const struct imx_spi_imx_data imx27_cspi_data[]; diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h index 488e241a6db..13f533d0aa5 100644 --- a/arch/arm/mach-imx/devices-imx31.h +++ b/arch/arm/mach-imx/devices-imx31.h @@ -14,7 +14,7 @@ extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data; imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata) extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data; -#define imx31_add_imx2_wdt(pdata) \ +#define imx31_add_imx2_wdt() \ imx_add_imx2_wdt(&imx31_imx2_wdt_data) extern const struct imx_imx_i2c_data imx31_imx_i2c_data[]; @@ -65,11 +65,11 @@ extern const struct imx_mxc_nand_data imx31_mxc_nand_data; imx_add_mxc_nand(&imx31_mxc_nand_data, pdata) extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data; -#define imx31_add_mxc_rtc(pdata) \ +#define imx31_add_mxc_rtc() \ imx_add_mxc_rtc(&imx31_mxc_rtc_data) extern const struct imx_mxc_w1_data imx31_mxc_w1_data; -#define imx31_add_mxc_w1(pdata) \ +#define imx31_add_mxc_w1() \ imx_add_mxc_w1(&imx31_mxc_w1_data) extern const struct imx_spi_imx_data imx31_cspi_data[]; diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h index 7b99ef0bb50..27245ce9cab 100644 --- a/arch/arm/mach-imx/devices-imx35.h +++ b/arch/arm/mach-imx/devices-imx35.h @@ -24,7 +24,7 @@ extern const struct imx_flexcan_data imx35_flexcan_data[]; #define imx35_add_flexcan1(pdata) imx35_add_flexcan(1, pdata) extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data; -#define imx35_add_imx2_wdt(pdata) \ +#define imx35_add_imx2_wdt() \ imx_add_imx2_wdt(&imx35_imx2_wdt_data) extern const struct imx_imx_i2c_data imx35_imx_i2c_data[]; @@ -69,7 +69,7 @@ extern const struct imx_mxc_nand_data imx35_mxc_nand_data; imx_add_mxc_nand(&imx35_mxc_nand_data, pdata) extern const struct imx_mxc_w1_data imx35_mxc_w1_data; -#define imx35_add_mxc_w1(pdata) \ +#define imx35_add_mxc_w1() \ imx_add_mxc_w1(&imx35_mxc_w1_data) extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[]; diff --git a/arch/arm/mach-imx/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h index af488bc0e22..9f171872519 100644 --- a/arch/arm/mach-imx/devices-imx51.h +++ b/arch/arm/mach-imx/devices-imx51.h @@ -55,7 +55,7 @@ extern const struct imx_spi_imx_data imx51_ecspi_data[]; imx_add_spi_imx(&imx51_ecspi_data[id], pdata) extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[]; -#define imx51_add_imx2_wdt(id, pdata) \ +#define imx51_add_imx2_wdt(id) \ imx_add_imx2_wdt(&imx51_imx2_wdt_data[id]) extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[]; diff --git a/arch/arm/mach-imx/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h index 6e1e5d1f8c3..77e0db96c44 100644 --- a/arch/arm/mach-imx/devices-imx53.h +++ b/arch/arm/mach-imx/devices-imx53.h @@ -30,7 +30,7 @@ extern const struct imx_spi_imx_data imx53_ecspi_data[]; imx_add_spi_imx(&imx53_ecspi_data[id], pdata) extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[]; -#define imx53_add_imx2_wdt(id, pdata) \ +#define imx53_add_imx2_wdt(id) \ imx_add_imx2_wdt(&imx53_imx2_wdt_data[id]) extern const struct imx_imx_ssi_data imx53_imx_ssi_data[]; diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index eee0cc8d92a..52efe4d5149 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -75,7 +75,7 @@ static struct sys_timer imx27_timer = { .init = imx27_timer_init, }; -static const char *imx27_dt_board_compat[] __initdata = { +static const char * const imx27_dt_board_compat[] __initconst = { "fsl,imx27", NULL }; diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index d085aea0870..9a3b06e688c 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -233,18 +233,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init eukrea_cpuimx27_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", eukrea_cpuimx27_otg_mode); @@ -266,8 +266,8 @@ static void __init eukrea_cpuimx27_init(void) imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_imx2_wdt(NULL); - imx27_add_mxc_w1(NULL); + imx27_add_imx2_wdt(); + imx27_add_mxc_w1(); #if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) /* SDHC2 can be used for Wifi */ diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 6450303f1a7..1634e54ffed 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -141,18 +141,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .workaround = FLS_USB2_WORKAROUND_ENGCM09152, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init eukrea_cpuimx35_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", eukrea_cpuimx35_otg_mode); @@ -167,7 +167,7 @@ static void __init eukrea_cpuimx35_init(void) ARRAY_SIZE(eukrea_cpuimx35_pads)); imx35_add_fec(NULL); - imx35_add_imx2_wdt(NULL); + imx35_add_imx2_wdt(); imx35_add_imx_uart0(&uart_pdata); imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info); diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index 1e09de50cbc..e78b40b4146 100644 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c @@ -217,18 +217,18 @@ static const struct mxc_usbh_platform_data usbh1_config __initconst = { .portsc = MXC_EHCI_MODE_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init eukrea_cpuimx51sd_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", eukrea_cpuimx51sd_otg_mode); @@ -292,7 +292,7 @@ static void __init eukrea_cpuimx51sd_init(void) imx51_add_imx_uart(0, &uart_pdata); imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info); - imx51_add_imx2_wdt(0, NULL); + imx51_add_imx2_wdt(0); gpio_request(ETH_RST, "eth_rst"); gpio_set_value(ETH_RST, 1); diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index d1e04e676e3..017bbb70ea4 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -109,18 +109,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .workaround = FLS_USB2_WORKAROUND_ENGCM09152, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init eukrea_cpuimx25_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", eukrea_cpuimx25_otg_mode); @@ -134,9 +134,9 @@ static void __init eukrea_cpuimx25_init(void) imx25_add_imx_uart0(&uart_pdata); imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info); - imx25_add_imxdi_rtc(NULL); + imx25_add_imxdi_rtc(); imx25_add_fec(&mx25_fec_pdata); - imx25_add_imx2_wdt(NULL); + imx25_add_imx2_wdt(); i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices, ARRAY_SIZE(eukrea_cpuimx25_i2c_devices)); diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index c9d350c5dcc..7381387a890 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -57,7 +57,7 @@ static void __init mx27ipcam_init(void) imx27_add_imx_uart0(NULL); imx27_add_fec(NULL); - imx27_add_imx2_wdt(NULL); + imx27_add_imx2_wdt(); } static void __init mx27ipcam_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index f26734298aa..ce247fd1269 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -237,9 +237,9 @@ static void __init mx25pdk_init(void) imx25_add_fsl_usb2_udc(&otg_device_pdata); imx25_add_mxc_ehci_hs(&usbh2_pdata); imx25_add_mxc_nand(&mx25pdk_nand_board_info); - imx25_add_imxdi_rtc(NULL); + imx25_add_imxdi_rtc(); imx25_add_imx_fb(&mx25pdk_fb_pdata); - imx25_add_imx2_wdt(NULL); + imx25_add_imx2_wdt(); mx25pdk_fec_reset(); imx25_add_fec(&mx25_fec_pdata); diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index c6d385c5225..ce9a5c26290 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -241,18 +241,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init mx27_3ds_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", mx27_3ds_otg_mode); @@ -480,7 +480,7 @@ static void __init mx27pdk_init(void) imx27_add_fec(NULL); imx27_add_imx_keypad(&mx27_3ds_keymap_data); imx27_add_mxc_mmc(0, &sdhc1_pdata); - imx27_add_imx2_wdt(NULL); + imx27_add_imx2_wdt(); otg_phy_init(); if (otg_mode_host) { diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 0228d2e07fe..7936bb32264 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -310,7 +310,7 @@ static void __init mx27ads_board_init(void) imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_mxc_w1(NULL); + imx27_add_mxc_w1(); } static void __init mx27ads_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 4eafdf275ea..928e1dcbc6a 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -671,18 +671,18 @@ static const struct fsl_usb2_platform_data usbotg_pdata __initconst = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init mx31_3ds_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", mx31_3ds_otg_mode); @@ -739,7 +739,7 @@ static void __init mx31_3ds_init(void) if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT)) printk(KERN_WARNING "Init of the debug board failed, all " "devices on the debug board are unusable.\n"); - imx31_add_imx2_wdt(NULL); + imx31_add_imx2_wdt(); imx31_add_imx_i2c0(&mx31_3ds_i2c0_data); imx31_add_mxc_mmc(0, &sdhc1_pdata); diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index 016791f038b..63e84e67b99 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -544,7 +544,7 @@ static void __init mx31moboard_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); gpio_led_register_device(-1, &mx31moboard_led_pdata); - imx31_add_imx2_wdt(NULL); + imx31_add_imx2_wdt(); imx31_add_imx_uart0(&uart0_pdata); imx31_add_imx_uart4(&uart4_pdata); diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 28aa19476de..6bff8790731 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -540,18 +540,18 @@ static const struct mxc_usbh_platform_data usb_host_pdata __initconst = { .portsc = MXC_EHCI_MODE_SERIAL, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init mx35_3ds_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", mx35_3ds_otg_mode); @@ -571,7 +571,7 @@ static void __init mx35_3ds_init(void) mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); imx35_add_fec(NULL); - imx35_add_imx2_wdt(NULL); + imx35_add_imx2_wdt(); platform_add_devices(devices, ARRAY_SIZE(devices)); imx35_add_imx_uart0(&uart_pdata); diff --git a/arch/arm/mach-imx/mach-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c index 3c5b163923f..2edb563b968 100644 --- a/arch/arm/mach-imx/mach-mx51_3ds.c +++ b/arch/arm/mach-imx/mach-mx51_3ds.c @@ -154,7 +154,7 @@ static void __init mx51_3ds_init(void) imx51_add_sdhci_esdhc_imx(0, NULL); imx51_add_imx_keypad(&mx51_3ds_map_data); - imx51_add_imx2_wdt(0, NULL); + imx51_add_imx2_wdt(0); } static void __init mx51_3ds_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c index dde397014d4..7b31cbde877 100644 --- a/arch/arm/mach-imx/mach-mx51_babbage.c +++ b/arch/arm/mach-imx/mach-mx51_babbage.c @@ -307,18 +307,18 @@ static const struct mxc_usbh_platform_data usbh1_config __initconst = { .portsc = MXC_EHCI_MODE_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init babbage_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", babbage_otg_mode); @@ -411,7 +411,7 @@ static void __init mx51_babbage_init(void) spi_register_board_info(mx51_babbage_spi_board_info, ARRAY_SIZE(mx51_babbage_spi_board_info)); imx51_add_ecspi(0, &mx51_babbage_spi_pdata); - imx51_add_imx2_wdt(0, NULL); + imx51_add_imx2_wdt(0); } static void __init mx51_babbage_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c index 05641980dc5..4a7593a953e 100644 --- a/arch/arm/mach-imx/mach-mx53_ard.c +++ b/arch/arm/mach-imx/mach-mx53_ard.c @@ -243,7 +243,7 @@ static void __init mx53_ard_board_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data); - imx53_add_imx2_wdt(0, NULL); + imx53_add_imx2_wdt(0); imx53_add_imx_i2c(1, &mx53_ard_i2c2_data); imx53_add_imx_i2c(2, &mx53_ard_i2c3_data); imx_add_gpio_keys(&ard_button_data); diff --git a/arch/arm/mach-imx/mach-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c index 5a72188b9cd..a1060b26fb2 100644 --- a/arch/arm/mach-imx/mach-mx53_evk.c +++ b/arch/arm/mach-imx/mach-mx53_evk.c @@ -154,7 +154,7 @@ static void __init mx53_evk_board_init(void) spi_register_board_info(mx53_evk_spi_board_info, ARRAY_SIZE(mx53_evk_spi_board_info)); imx53_add_ecspi(0, &mx53_evk_spi_data); - imx53_add_imx2_wdt(0, NULL); + imx53_add_imx2_wdt(0); gpio_led_register_device(-1, &mx53evk_leds_data); } diff --git a/arch/arm/mach-imx/mach-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c index 37f67cac15a..388c415d6b6 100644 --- a/arch/arm/mach-imx/mach-mx53_loco.c +++ b/arch/arm/mach-imx/mach-mx53_loco.c @@ -283,7 +283,7 @@ static void __init mx53_loco_board_init(void) imx53_add_imx_uart(0, NULL); mx53_loco_fec_reset(); imx53_add_fec(&mx53_loco_fec_data); - imx53_add_imx2_wdt(0, NULL); + imx53_add_imx2_wdt(0); ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en"); if (ret) diff --git a/arch/arm/mach-imx/mach-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c index 8e972c5c3e1..f297df7ccb3 100644 --- a/arch/arm/mach-imx/mach-mx53_smd.c +++ b/arch/arm/mach-imx/mach-mx53_smd.c @@ -138,7 +138,7 @@ static void __init mx53_smd_board_init(void) mx53_smd_init_uart(); mx53_smd_fec_reset(); imx53_add_fec(&mx53_smd_fec_data); - imx53_add_imx2_wdt(0, NULL); + imx53_add_imx2_wdt(0); imx53_add_imx_i2c(0, &mx53_smd_i2c_data); imx53_add_sdhci_esdhc_imx(0, NULL); imx53_add_sdhci_esdhc_imx(1, NULL); diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 541152e450c..d37ed25003b 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -298,18 +298,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init pca100_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", pca100_otg_mode); @@ -408,8 +408,8 @@ static void __init pca100_init(void) imx27_add_imx_fb(&pca100_fb_data); imx27_add_fec(NULL); - imx27_add_imx2_wdt(NULL); - imx27_add_mxc_w1(NULL); + imx27_add_imx2_wdt(); + imx27_add_mxc_w1(); } static void __init pca100_timer_init(void) diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 0a40004154f..cd48712a6f5 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -557,18 +557,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init pcm037_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", pcm037_otg_mode); @@ -619,13 +619,13 @@ static void __init pcm037_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - imx31_add_imx2_wdt(NULL); + imx31_add_imx2_wdt(); imx31_add_imx_uart0(&uart_pdata); /* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */ imx31_add_imx_uart1(&uart_pdata); imx31_add_imx_uart2(&uart_pdata); - imx31_add_mxc_w1(NULL); + imx31_add_mxc_w1(); /* LAN9217 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq"); diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 2f3debe2a11..3fbb89d74fc 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -332,8 +332,8 @@ static void __init pcm038_init(void) imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_imx2_wdt(NULL); - imx27_add_mxc_w1(NULL); + imx27_add_imx2_wdt(); + imx27_add_mxc_w1(); #ifdef CONFIG_MACH_PCM970_BASEBOARD pcm970_baseboard_init(); diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 73585f55cca..1f20f222375 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -330,18 +330,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .phy_mode = FSL_USB2_PHY_UTMI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init pcm043_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", pcm043_otg_mode); @@ -363,7 +363,7 @@ static void __init pcm043_init(void) imx35_add_fec(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); - imx35_add_imx2_wdt(NULL); + imx35_add_imx2_wdt(); imx35_add_imx_uart0(&uart_pdata); imx35_add_mxc_nand(&pcm037_nand_board_info); diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 260621055b6..a13087b11a6 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -252,7 +252,7 @@ static void __init qong_init(void) mxc_init_imx_uart(); qong_init_nor_mtd(); qong_init_fpga(); - imx31_add_imx2_wdt(NULL); + imx31_add_imx2_wdt(); } static void __init qong_timer_init(void) diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index add8c69c6c1..b26209d4bce 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -272,7 +272,7 @@ static void __init vpr200_board_init(void) mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads)); imx35_add_fec(NULL); - imx35_add_imx2_wdt(NULL); + imx35_add_imx2_wdt(); imx_add_gpio_keys(&vpr200_gpio_keys_data); platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c index bf0fb87946b..fa60ef6ac7f 100644 --- a/arch/arm/mach-imx/mx31lite-db.c +++ b/arch/arm/mach-imx/mx31lite-db.c @@ -191,6 +191,6 @@ void __init mx31lite_db_init(void) imx31_add_mxc_mmc(0, &mmc_pdata); imx31_add_spi_imx0(&spi0_pdata); gpio_led_register_device(-1, &litekit_led_platform_data); - imx31_add_imx2_wdt(NULL); - imx31_add_mxc_rtc(NULL); + imx31_add_imx2_wdt(); + imx31_add_mxc_rtc(); } diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index f2f8a584701..c53469802c0 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -37,12 +37,12 @@ #include <plat/board-ams-delta.h> #include <plat/keypad.h> #include <plat/mux.h> -#include <plat/usb.h> #include <plat/board.h> #include <mach/hardware.h> #include <mach/ams-delta-fiq.h> #include <mach/camera.h> +#include <mach/usb.h> #include "iomap.h" #include "common.h" diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index e75e2d55a2d..6ec385e2b98 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -23,8 +23,10 @@ #include <asm/mach/map.h> #include <plat/mux.h> -#include <plat/usb.h> #include <plat/board.h> + +#include <mach/usb.h> + #include "common.h" /* assume no Mini-AB port */ diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index a28e989a63f..44a4ab195fb 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -40,11 +40,11 @@ #include <plat/dma.h> #include <plat/tc.h> #include <plat/irda.h> -#include <plat/usb.h> #include <plat/keypad.h> #include <plat/flash.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" #include "board-h2.h" diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 108a8640fc6..86cb5a04a40 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -40,13 +40,13 @@ #include <plat/mux.h> #include <plat/tc.h> -#include <plat/usb.h> #include <plat/keypad.h> #include <plat/dma.h> #include <plat/flash.h> #include <mach/hardware.h> #include <mach/irqs.h> +#include <mach/usb.h> #include "common.h" #include "board-h3.h" diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 118a9d4a4c5..b3f6e943e66 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -44,10 +44,10 @@ #include <plat/omap7xx.h> #include <plat/board.h> #include <plat/keypad.h> -#include <plat/usb.h> #include <plat/mmc.h> #include <mach/irqs.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 7970223a559..f21c2966daa 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -35,11 +35,11 @@ #include <plat/flash.h> #include <plat/fpga.h> #include <plat/tc.h> -#include <plat/usb.h> #include <plat/keypad.h> #include <plat/mmc.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "iomap.h" #include "common.h" diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 7212ae97f44..4007a372481 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -26,7 +26,6 @@ #include <asm/mach/map.h> #include <plat/mux.h> -#include <plat/usb.h> #include <plat/board.h> #include <plat/keypad.h> #include <plat/lcd_mipid.h> @@ -34,6 +33,7 @@ #include <plat/clock.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index da8d872d3d1..8784705edb6 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -45,11 +45,11 @@ #include <asm/mach/map.h> #include <plat/flash.h> -#include <plat/usb.h> #include <plat/mux.h> #include <plat/tc.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 949b62a7369..26bcb9defcd 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -35,7 +35,6 @@ #include <plat/flash.h> #include <plat/mux.h> -#include <plat/usb.h> #include <plat/tc.h> #include <plat/dma.h> #include <plat/board.h> @@ -43,6 +42,7 @@ #include <plat/keypad.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 7f1e1cf2bf4..4d099446dfa 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -35,7 +35,6 @@ #include <plat/led.h> #include <plat/flash.h> #include <plat/mux.h> -#include <plat/usb.h> #include <plat/dma.h> #include <plat/tc.h> #include <plat/board.h> @@ -43,6 +42,7 @@ #include <plat/keypad.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 3c71c6bace2..cc71a26723e 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -37,7 +37,6 @@ #include <plat/flash.h> #include <plat/mux.h> -#include <plat/usb.h> #include <plat/dma.h> #include <plat/tc.h> #include <plat/board.h> @@ -45,6 +44,7 @@ #include <plat/keypad.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 3b7b82b1368..8c665bd16ac 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -37,13 +37,13 @@ #include <plat/mux.h> #include <plat/dma.h> #include <plat/irda.h> -#include <plat/usb.h> #include <plat/tc.h> #include <plat/board.h> #include <plat/keypad.h> #include <plat/board-sx1.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index afd67f0ec49..3497769eb35 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -35,9 +35,10 @@ #include <plat/flash.h> #include <plat/mux.h> #include <plat/tc.h> -#include <plat/usb.h> +#include <plat/board.h> #include <mach/hardware.h> +#include <mach/usb.h> #include "common.h" diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index c6ce93f71d0..c007d80dfb6 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -25,10 +25,11 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/clkdev_omap.h> +#include <plat/board.h> #include <plat/sram.h> /* for omap_sram_reprogram_clock() */ -#include <plat/usb.h> /* for OTG_BASE */ #include <mach/hardware.h> +#include <mach/usb.h> /* for OTG_BASE */ #include "iomap.h" #include "clock.h" diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h new file mode 100644 index 00000000000..753cd5ce694 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/usb.h @@ -0,0 +1,165 @@ +/* + * FIXME correct answer depends on hmc_mode, + * as does (on omap1) any nonzero value for config->otg port number + */ +#ifdef CONFIG_USB_GADGET_OMAP +#define is_usb0_device(config) 1 +#else +#define is_usb0_device(config) 0 +#endif + +struct omap_usb_config { + /* Configure drivers according to the connectors on your board: + * - "A" connector (rectagular) + * ... for host/OHCI use, set "register_host". + * - "B" connector (squarish) or "Mini-B" + * ... for device/gadget use, set "register_dev". + * - "Mini-AB" connector (very similar to Mini-B) + * ... for OTG use as device OR host, initialize "otg" + */ + unsigned register_host:1; + unsigned register_dev:1; + u8 otg; /* port number, 1-based: usb1 == 2 */ + + u8 hmc_mode; + + /* implicitly true if otg: host supports remote wakeup? */ + u8 rwc; + + /* signaling pins used to talk to transceiver on usbN: + * 0 == usbN unused + * 2 == usb0-only, using internal transceiver + * 3 == 3 wire bidirectional + * 4 == 4 wire bidirectional + * 6 == 6 wire unidirectional (or TLL) + */ + u8 pins[3]; + + struct platform_device *udc_device; + struct platform_device *ohci_device; + struct platform_device *otg_device; + + u32 (*usb0_init)(unsigned nwires, unsigned is_device); + u32 (*usb1_init)(unsigned nwires); + u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup); + + int (*ocpi_enable)(void); +}; + +void omap_otg_init(struct omap_usb_config *config); + +#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE) +void omap1_usb_init(struct omap_usb_config *pdata); +#else +static inline void omap1_usb_init(struct omap_usb_config *pdata) +{ +} +#endif + +#define OMAP1_OTG_BASE 0xfffb0400 +#define OMAP1_UDC_BASE 0xfffb4000 +#define OMAP1_OHCI_BASE 0xfffba000 + +#define OMAP2_OHCI_BASE 0x4805e000 +#define OMAP2_UDC_BASE 0x4805e200 +#define OMAP2_OTG_BASE 0x4805e300 +#define OTG_BASE OMAP1_OTG_BASE +#define UDC_BASE OMAP1_UDC_BASE +#define OMAP_OHCI_BASE OMAP1_OHCI_BASE + +/* + * OTG and transceiver registers, for OMAPs starting with ARM926 + */ +#define OTG_REV (OTG_BASE + 0x00) +#define OTG_SYSCON_1 (OTG_BASE + 0x04) +# define USB2_TRX_MODE(w) (((w)>>24)&0x07) +# define USB1_TRX_MODE(w) (((w)>>20)&0x07) +# define USB0_TRX_MODE(w) (((w)>>16)&0x07) +# define OTG_IDLE_EN (1 << 15) +# define HST_IDLE_EN (1 << 14) +# define DEV_IDLE_EN (1 << 13) +# define OTG_RESET_DONE (1 << 2) +# define OTG_SOFT_RESET (1 << 1) +#define OTG_SYSCON_2 (OTG_BASE + 0x08) +# define OTG_EN (1 << 31) +# define USBX_SYNCHRO (1 << 30) +# define OTG_MST16 (1 << 29) +# define SRP_GPDATA (1 << 28) +# define SRP_GPDVBUS (1 << 27) +# define SRP_GPUVBUS(w) (((w)>>24)&0x07) +# define A_WAIT_VRISE(w) (((w)>>20)&0x07) +# define B_ASE_BRST(w) (((w)>>16)&0x07) +# define SRP_DPW (1 << 14) +# define SRP_DATA (1 << 13) +# define SRP_VBUS (1 << 12) +# define OTG_PADEN (1 << 10) +# define HMC_PADEN (1 << 9) +# define UHOST_EN (1 << 8) +# define HMC_TLLSPEED (1 << 7) +# define HMC_TLLATTACH (1 << 6) +# define OTG_HMC(w) (((w)>>0)&0x3f) +#define OTG_CTRL (OTG_BASE + 0x0c) +# define OTG_USB2_EN (1 << 29) +# define OTG_USB2_DP (1 << 28) +# define OTG_USB2_DM (1 << 27) +# define OTG_USB1_EN (1 << 26) +# define OTG_USB1_DP (1 << 25) +# define OTG_USB1_DM (1 << 24) +# define OTG_USB0_EN (1 << 23) +# define OTG_USB0_DP (1 << 22) +# define OTG_USB0_DM (1 << 21) +# define OTG_ASESSVLD (1 << 20) +# define OTG_BSESSEND (1 << 19) +# define OTG_BSESSVLD (1 << 18) +# define OTG_VBUSVLD (1 << 17) +# define OTG_ID (1 << 16) +# define OTG_DRIVER_SEL (1 << 15) +# define OTG_A_SETB_HNPEN (1 << 12) +# define OTG_A_BUSREQ (1 << 11) +# define OTG_B_HNPEN (1 << 9) +# define OTG_B_BUSREQ (1 << 8) +# define OTG_BUSDROP (1 << 7) +# define OTG_PULLDOWN (1 << 5) +# define OTG_PULLUP (1 << 4) +# define OTG_DRV_VBUS (1 << 3) +# define OTG_PD_VBUS (1 << 2) +# define OTG_PU_VBUS (1 << 1) +# define OTG_PU_ID (1 << 0) +#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ +# define DRIVER_SWITCH (1 << 15) +# define A_VBUS_ERR (1 << 13) +# define A_REQ_TMROUT (1 << 12) +# define A_SRP_DETECT (1 << 11) +# define B_HNP_FAIL (1 << 10) +# define B_SRP_TMROUT (1 << 9) +# define B_SRP_DONE (1 << 8) +# define B_SRP_STARTED (1 << 7) +# define OPRT_CHG (1 << 0) +#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ + // same bits as in IRQ_EN +#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ +# define OTGVPD (1 << 14) +# define OTGVPU (1 << 13) +# define OTGPUID (1 << 12) +# define USB2VDR (1 << 10) +# define USB2PDEN (1 << 9) +# define USB2PUEN (1 << 8) +# define USB1VDR (1 << 6) +# define USB1PDEN (1 << 5) +# define USB1PUEN (1 << 4) +# define USB0VDR (1 << 2) +# define USB0PDEN (1 << 1) +# define USB0PUEN (1 << 0) +#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ +#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ + +/*-------------------------------------------------------------------------*/ + +/* OMAP1 */ +#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) +# define CONF_USB2_UNI_R (1 << 8) +# define CONF_USB1_UNI_R (1 << 7) +# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) +# define CONF_USB0_ISOLATE_R (1 << 3) +# define CONF_USB_PWRDN_DM_R (1 << 2) +# define CONF_USB_PWRDN_DP_R (1 << 1) diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index e61afd92276..65f88176fba 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -27,7 +27,8 @@ #include <asm/irq.h> #include <plat/mux.h> -#include <plat/usb.h> + +#include <mach/usb.h> #include "common.h" @@ -55,6 +56,119 @@ #define INT_USB_IRQ_HGEN INT_USB_HHC_1 #define INT_USB_IRQ_OTG IH2_BASE + 8 +#ifdef CONFIG_ARCH_OMAP_OTG + +void __init +omap_otg_init(struct omap_usb_config *config) +{ + u32 syscon; + int alt_pingroup = 0; + + /* NOTE: no bus or clock setup (yet?) */ + + syscon = omap_readl(OTG_SYSCON_1) & 0xffff; + if (!(syscon & OTG_RESET_DONE)) + pr_debug("USB resets not complete?\n"); + + //omap_writew(0, OTG_IRQ_EN); + + /* pin muxing and transceiver pinouts */ + if (config->pins[0] > 2) /* alt pingroup 2 */ + alt_pingroup = 1; + syscon |= config->usb0_init(config->pins[0], is_usb0_device(config)); + syscon |= config->usb1_init(config->pins[1]); + syscon |= config->usb2_init(config->pins[2], alt_pingroup); + pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1)); + omap_writel(syscon, OTG_SYSCON_1); + + syscon = config->hmc_mode; + syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */; +#ifdef CONFIG_USB_OTG + if (config->otg) + syscon |= OTG_EN; +#endif + if (cpu_class_is_omap1()) + pr_debug("USB_TRANSCEIVER_CTRL = %03x\n", + omap_readl(USB_TRANSCEIVER_CTRL)); + pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2)); + omap_writel(syscon, OTG_SYSCON_2); + + printk("USB: hmc %d", config->hmc_mode); + if (!alt_pingroup) + printk(", usb2 alt %d wires", config->pins[2]); + else if (config->pins[0]) + printk(", usb0 %d wires%s", config->pins[0], + is_usb0_device(config) ? " (dev)" : ""); + if (config->pins[1]) + printk(", usb1 %d wires", config->pins[1]); + if (!alt_pingroup && config->pins[2]) + printk(", usb2 %d wires", config->pins[2]); + if (config->otg) + printk(", Mini-AB on usb%d", config->otg - 1); + printk("\n"); + + if (cpu_class_is_omap1()) { + u16 w; + + /* leave USB clocks/controllers off until needed */ + w = omap_readw(ULPD_SOFT_REQ); + w &= ~SOFT_USB_CLK_REQ; + omap_writew(w, ULPD_SOFT_REQ); + + w = omap_readw(ULPD_CLOCK_CTRL); + w &= ~USB_MCLK_EN; + w |= DIS_USB_PVCI_CLK; + omap_writew(w, ULPD_CLOCK_CTRL); + } + syscon = omap_readl(OTG_SYSCON_1); + syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN; + +#ifdef CONFIG_USB_GADGET_OMAP + if (config->otg || config->register_dev) { + struct platform_device *udc_device = config->udc_device; + int status; + + syscon &= ~DEV_IDLE_EN; + udc_device->dev.platform_data = config; + status = platform_device_register(udc_device); + if (status) + pr_debug("can't register UDC device, %d\n", status); + } +#endif + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + if (config->otg || config->register_host) { + struct platform_device *ohci_device = config->ohci_device; + int status; + + syscon &= ~HST_IDLE_EN; + ohci_device->dev.platform_data = config; + status = platform_device_register(ohci_device); + if (status) + pr_debug("can't register OHCI device, %d\n", status); + } +#endif + +#ifdef CONFIG_USB_OTG + if (config->otg) { + struct platform_device *otg_device = config->otg_device; + int status; + + syscon &= ~OTG_IDLE_EN; + otg_device->dev.platform_data = config; + status = platform_device_register(otg_device); + if (status) + pr_debug("can't register OTG device, %d\n", status); + } +#endif + pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1)); + omap_writel(syscon, OTG_SYSCON_1); +} + +#else +void omap_otg_init(struct omap_usb_config *config) {} +#endif + #ifdef CONFIG_USB_GADGET_OMAP static struct resource udc_resources[] = { diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 2f4ace6f91d..184469517f1 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -66,19 +66,16 @@ config SOC_OMAP2420 depends on ARCH_OMAP2 default y select OMAP_DM_TIMER - select ARCH_OMAP_OTG config SOC_OMAP2430 bool "OMAP2430 support" depends on ARCH_OMAP2 default y - select ARCH_OMAP_OTG config SOC_OMAP3430 bool "OMAP3430 support" depends on ARCH_OMAP3 default y - select ARCH_OMAP_OTG config SOC_TI81XX bool "TI81XX support" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 6be43ac5c35..8e8ef8200bf 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -119,7 +119,6 @@ obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o # PRCM clockdomain control clockdomain-common += clockdomain.o -clockdomain-common += clockdomains_common_data.o obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP2) += clockdomain2xxx_3xxx.o obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o @@ -247,9 +246,6 @@ obj-y += $(omap-flash-y) $(omap-flash-m) omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y) - -usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o -obj-y += $(usbfs-m) $(usbfs-y) obj-y += usb-musb.o obj-y += omap_phy_internal.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 0dac4db0113..9511584fdc4 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -251,16 +251,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; -static struct omap_usb_config sdp2430_usb_config __initdata = { - .otg = 1, -#ifdef CONFIG_USB_GADGET_OMAP - .hmc_mode = 0x0, -#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - .hmc_mode = 0x1, -#endif - .pins[0] = 3, -}; - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -277,7 +267,6 @@ static void __init omap_2430sdp_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); omap_hsmmc_init(mmc); - omap2_usbfs_init(&sdp2430_usb_config); omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP); usb_musb_init(NULL); diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 502c31e123b..519bcd3079e 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -35,7 +35,6 @@ #include <asm/mach/flash.h> #include <plat/led.h> -#include <plat/usb.h> #include <plat/board.h> #include "common.h" #include <plat/gpmc.h> @@ -253,13 +252,6 @@ out: clk_put(gpmc_fck); } -static struct omap_usb_config apollon_usb_config __initdata = { - .register_dev = 1, - .hmc_mode = 0x14, /* 0:dev 1:host1 2:disable */ - - .pins[0] = 6, -}; - static struct panel_generic_dpi_data apollon_panel_data = { .name = "apollon", }; @@ -297,15 +289,6 @@ static void __init apollon_led_init(void) gpio_request_array(apollon_gpio_leds, ARRAY_SIZE(apollon_gpio_leds)); } -static void __init apollon_usb_init(void) -{ - /* USB device */ - /* DEVICE_SUSPEND */ - omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0); - gpio_request_one(12, GPIOF_OUT_INIT_LOW, "USB suspend"); - omap2_usbfs_init(&apollon_usb_config); -} - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -321,7 +304,6 @@ static void __init omap_apollon_init(void) apollon_init_smc91x(); apollon_led_init(); apollon_flash_init(); - apollon_usb_init(); /* REVISIT: where's the correct place */ omap_mux_init_signal("sys_nirq", OMAP_PULL_ENA | OMAP_PULL_UP); diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 876becf8205..ace20482e3e 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/usb.h> #include <plat/board.h> #include "common.h" #include <plat/menelaus.h> @@ -329,17 +328,6 @@ static void __init h4_init_flash(void) h4_flash_resource.end = base + SZ_64M - 1; } -static struct omap_usb_config h4_usb_config __initdata = { - /* S1.10 OFF -- usb "download port" - * usb0 switched to Mini-B port and isp1105 transceiver; - * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging - */ - .register_dev = 1, - .pins[0] = 3, -/* .hmc_mode = 0x14,*/ /* 0:dev 1:host 2:disable */ - .hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */ -}; - static struct at24_platform_data m24c01 = { .byte_len = SZ_1K / 8, .page_size = 16, @@ -381,7 +369,6 @@ static void __init omap_h4_init(void) ARRAY_SIZE(h4_i2c_board_info)); platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices)); - omap2_usbfs_init(&h4_usb_config); omap_serial_init(); omap_sdrc_init(NULL, NULL); h4_init_flash(); diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index bace9308a4d..7e39015357b 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1774,8 +1774,6 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "osc_ck", &osc_ck, CK_242X), CLK(NULL, "sys_ck", &sys_ck, CK_242X), CLK(NULL, "alt_ck", &alt_ck, CK_242X), - CLK("omap-mcbsp.1", "pad_fck", &mcbsp_clks, CK_242X), - CLK("omap-mcbsp.2", "pad_fck", &mcbsp_clks, CK_242X), CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_242X), /* internal analog sources */ CLK(NULL, "dpll_ck", &dpll_ck, CK_242X), @@ -1784,8 +1782,6 @@ static struct omap_clk omap2420_clks[] = { /* internal prcm root sources */ CLK(NULL, "func_54m_ck", &func_54m_ck, CK_242X), CLK(NULL, "core_ck", &core_ck, CK_242X), - CLK("omap-mcbsp.1", "prcm_fck", &func_96m_ck, CK_242X), - CLK("omap-mcbsp.2", "prcm_fck", &func_96m_ck, CK_242X), CLK(NULL, "func_96m_ck", &func_96m_ck, CK_242X), CLK(NULL, "func_48m_ck", &func_48m_ck, CK_242X), CLK(NULL, "func_12m_ck", &func_12m_ck, CK_242X), diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index 3b4d09a5039..90a08c3b12a 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -1858,11 +1858,6 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "osc_ck", &osc_ck, CK_243X), CLK(NULL, "sys_ck", &sys_ck, CK_243X), CLK(NULL, "alt_ck", &alt_ck, CK_243X), - CLK("omap-mcbsp.1", "pad_fck", &mcbsp_clks, CK_243X), - CLK("omap-mcbsp.2", "pad_fck", &mcbsp_clks, CK_243X), - CLK("omap-mcbsp.3", "pad_fck", &mcbsp_clks, CK_243X), - CLK("omap-mcbsp.4", "pad_fck", &mcbsp_clks, CK_243X), - CLK("omap-mcbsp.5", "pad_fck", &mcbsp_clks, CK_243X), CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_243X), /* internal analog sources */ CLK(NULL, "dpll_ck", &dpll_ck, CK_243X), @@ -1871,11 +1866,6 @@ static struct omap_clk omap2430_clks[] = { /* internal prcm root sources */ CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X), CLK(NULL, "core_ck", &core_ck, CK_243X), - CLK("omap-mcbsp.1", "prcm_fck", &func_96m_ck, CK_243X), - CLK("omap-mcbsp.2", "prcm_fck", &func_96m_ck, CK_243X), - CLK("omap-mcbsp.3", "prcm_fck", &func_96m_ck, CK_243X), - CLK("omap-mcbsp.4", "prcm_fck", &func_96m_ck, CK_243X), - CLK("omap-mcbsp.5", "prcm_fck", &func_96m_ck, CK_243X), CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X), CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X), CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X), diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index a67aaa97dcd..049061778a8 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3240,11 +3240,6 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_3XXX), CLK(NULL, "sys_ck", &sys_ck, CK_3XXX), CLK(NULL, "sys_altclk", &sys_altclk, CK_3XXX), - CLK("omap-mcbsp.1", "pad_fck", &mcbsp_clks, CK_3XXX), - CLK("omap-mcbsp.2", "pad_fck", &mcbsp_clks, CK_3XXX), - CLK("omap-mcbsp.3", "pad_fck", &mcbsp_clks, CK_3XXX), - CLK("omap-mcbsp.4", "pad_fck", &mcbsp_clks, CK_3XXX), - CLK("omap-mcbsp.5", "pad_fck", &mcbsp_clks, CK_3XXX), CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_3XXX), CLK(NULL, "sys_clkout1", &sys_clkout1, CK_3XXX), CLK(NULL, "dpll1_ck", &dpll1_ck, CK_3XXX), @@ -3311,8 +3306,6 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("usbhs_omap", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX), - CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "mmchs3_fck", &mmchs3_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_3XXX), @@ -3417,9 +3410,6 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX), CLK(NULL, "gpt12_ick", &gpt12_ick, CK_3XXX), CLK(NULL, "gpt1_ick", &gpt1_ick, CK_3XXX), - CLK("omap-mcbsp.2", "prcm_fck", &per_96m_fck, CK_3XXX), - CLK("omap-mcbsp.3", "prcm_fck", &per_96m_fck, CK_3XXX), - CLK("omap-mcbsp.4", "prcm_fck", &per_96m_fck, CK_3XXX), CLK(NULL, "per_96m_fck", &per_96m_fck, CK_3XXX), CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX), CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX), diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 6227e9505c2..c9523c6164b 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -210,7 +210,5 @@ extern struct clkdm_ops omap4_clkdm_operations; extern struct clkdm_dep gfx_24xx_wkdeps[]; extern struct clkdm_dep dsp_24xx_wkdeps[]; extern struct clockdomain wkup_common_clkdm; -extern struct clockdomain prm_common_clkdm; -extern struct clockdomain cm_common_clkdm; #endif diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c index 0ab8e46d5b2..5c741852fac 100644 --- a/arch/arm/mach-omap2/clockdomains2420_data.c +++ b/arch/arm/mach-omap2/clockdomains2420_data.c @@ -131,8 +131,6 @@ static struct clockdomain dss_2420_clkdm = { static struct clockdomain *clockdomains_omap242x[] __initdata = { &wkup_common_clkdm, - &cm_common_clkdm, - &prm_common_clkdm, &mpu_2420_clkdm, &iva1_2420_clkdm, &dsp_2420_clkdm, diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c index 3645ed04489..f09617555e1 100644 --- a/arch/arm/mach-omap2/clockdomains2430_data.c +++ b/arch/arm/mach-omap2/clockdomains2430_data.c @@ -157,8 +157,6 @@ static struct clockdomain dss_2430_clkdm = { static struct clockdomain *clockdomains_omap243x[] __initdata = { &wkup_common_clkdm, - &cm_common_clkdm, - &prm_common_clkdm, &mpu_2430_clkdm, &mdm_clkdm, &dsp_2430_clkdm, diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c index 8e35080026d..56089c49142 100644 --- a/arch/arm/mach-omap2/clockdomains3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c @@ -454,8 +454,6 @@ static struct clkdm_autodep clkdm_am35x_autodeps[] = { static struct clockdomain *clockdomains_common[] __initdata = { &wkup_common_clkdm, - &cm_common_clkdm, - &prm_common_clkdm, &neon_clkdm, &core_l3_3xxx_clkdm, &core_l4_3xxx_clkdm, diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index 7f2133abe7d..63d60a773d3 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -430,8 +430,6 @@ static struct clockdomain *clockdomains_omap44xx[] __initdata = { &l4_wkup_44xx_clkdm, &emu_sys_44xx_clkdm, &l3_dma_44xx_clkdm, - &prm_common_clkdm, - &cm_common_clkdm, NULL }; diff --git a/arch/arm/mach-omap2/clockdomains_common_data.c b/arch/arm/mach-omap2/clockdomains_common_data.c deleted file mode 100644 index 615b1f04967..00000000000 --- a/arch/arm/mach-omap2/clockdomains_common_data.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * OMAP2+-common clockdomain data - * - * Copyright (C) 2008-2012 Texas Instruments, Inc. - * Copyright (C) 2008-2010 Nokia Corporation - * - * Paul Walmsley, Jouni Högander - */ - -#include <linux/kernel.h> -#include <linux/io.h> - -#include "clockdomain.h" - -/* These are implicit clockdomains - they are never defined as such in TRM */ -struct clockdomain prm_common_clkdm = { - .name = "prm_clkdm", - .pwrdm = { .name = "wkup_pwrdm" }, -}; - -struct clockdomain cm_common_clkdm = { - .name = "cm_clkdm", - .pwrdm = { .name = "core_pwrdm" }, -}; diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 08e674bb041..3223b81e753 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -241,6 +241,49 @@ void omap3_ctrl_write_boot_mode(u8 bootmode) #endif +/** + * omap_ctrl_write_dsp_boot_addr - set boot address for a remote processor + * @bootaddr: physical address of the boot loader + * + * Set boot address for the boot loader of a supported processor + * when a power ON sequence occurs. + */ +void omap_ctrl_write_dsp_boot_addr(u32 bootaddr) +{ + u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTADDR : + cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTADDR : + cpu_is_omap44xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR : + 0; + + if (!offset) { + pr_err("%s: unsupported omap type\n", __func__); + return; + } + + omap_ctrl_writel(bootaddr, offset); +} + +/** + * omap_ctrl_write_dsp_boot_mode - set boot mode for a remote processor + * @bootmode: 8-bit value to pass to some boot code + * + * Sets boot mode for the boot loader of a supported processor + * when a power ON sequence occurs. + */ +void omap_ctrl_write_dsp_boot_mode(u8 bootmode) +{ + u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTMOD : + cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTMOD : + 0; + + if (!offset) { + pr_err("%s: unsupported omap type\n", __func__); + return; + } + + omap_ctrl_writel(bootmode, offset); +} + #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) /* * Clears the scratchpad contents in case of cold boot- diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index a406fd045ce..fcc98f822d9 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -397,6 +397,8 @@ extern u32 omap3_arm_context[128]; extern void omap3_control_save_context(void); extern void omap3_control_restore_context(void); extern void omap3_ctrl_write_boot_mode(u8 bootmode); +extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr); +extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode); extern void omap3630_ctrl_disable_rta(void); extern int omap3_ctrl_save_padconf(void); #else diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index 88ffa1e645c..a636ebc16b3 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -23,6 +23,7 @@ #include <asm/memblock.h> +#include "control.h" #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" #ifdef CONFIG_BRIDGE_DVFS @@ -46,6 +47,9 @@ static struct omap_dsp_platform_data omap_dsp_pdata __initdata = { .dsp_cm_read = omap2_cm_read_mod_reg, .dsp_cm_write = omap2_cm_write_mod_reg, .dsp_cm_rmw_bits = omap2_cm_rmw_mod_reg_bits, + + .set_bootaddr = omap_ctrl_write_dsp_boot_addr, + .set_bootmode = omap_ctrl_write_dsp_boot_mode, }; static phys_addr_t omap_dsp_phys_mempool_base; diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h index 2f7ac70a20d..01970824e0e 100644 --- a/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h +++ b/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h @@ -42,6 +42,7 @@ #define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_1 0x0268 #define OMAP4_CTRL_MODULE_CORE_STATUS 0x02c4 #define OMAP4_CTRL_MODULE_CORE_DEV_CONF 0x0300 +#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR 0x0304 #define OMAP4_CTRL_MODULE_CORE_LDOVBB_IVA_VOLTAGE_CTRL 0x0314 #define OMAP4_CTRL_MODULE_CORE_LDOVBB_MPU_VOLTAGE_CTRL 0x0318 #define OMAP4_CTRL_MODULE_CORE_LDOSRAM_IVA_VOLTAGE_CTRL 0x0320 diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 2d710f50fca..bdc1ec2edb4 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -166,6 +166,31 @@ */ #define LINKS_PER_OCP_IF 2 +/** + * struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations + * @enable_module: function to enable a module (via MODULEMODE) + * @disable_module: function to disable a module (via MODULEMODE) + * + * XXX Eventually this functionality will be hidden inside the PRM/CM + * device drivers. Until then, this should avoid huge blocks of cpu_is_*() + * conditionals in this code. + */ +struct omap_hwmod_soc_ops { + void (*enable_module)(struct omap_hwmod *oh); + int (*disable_module)(struct omap_hwmod *oh); + int (*wait_target_ready)(struct omap_hwmod *oh); + int (*assert_hardreset)(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri); + int (*deassert_hardreset)(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri); + int (*is_hardreset_asserted)(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri); + int (*init_clkdm)(struct omap_hwmod *oh); +}; + +/* soc_ops: adapts the omap_hwmod code to the currently-booted SoC */ +static struct omap_hwmod_soc_ops soc_ops; + /* omap_hwmod_list contains all registered struct omap_hwmods */ static LIST_HEAD(omap_hwmod_list); @@ -186,6 +211,9 @@ static struct omap_hwmod_link *linkspace; */ static unsigned short free_ls, max_ls, ls_supp; +/* inited: set to true once the hwmod code is initialized */ +static bool inited; + /* Private functions */ /** @@ -771,23 +799,19 @@ static void _disable_optional_clocks(struct omap_hwmod *oh) } /** - * _enable_module - enable CLKCTRL modulemode on OMAP4 + * _omap4_enable_module - enable CLKCTRL modulemode on OMAP4 * @oh: struct omap_hwmod * * * Enables the PRCM module mode related to the hwmod @oh. * No return value. */ -static void _enable_module(struct omap_hwmod *oh) +static void _omap4_enable_module(struct omap_hwmod *oh) { - /* The module mode does not exist prior OMAP4 */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - return; - if (!oh->clkdm || !oh->prcm.omap4.modulemode) return; - pr_debug("omap_hwmod: %s: _enable_module: %d\n", - oh->name, oh->prcm.omap4.modulemode); + pr_debug("omap_hwmod: %s: %s: %d\n", + oh->name, __func__, oh->prcm.omap4.modulemode); omap4_cminst_module_enable(oh->prcm.omap4.modulemode, oh->clkdm->prcm_partition, @@ -807,10 +831,7 @@ static void _enable_module(struct omap_hwmod *oh) */ static int _omap4_wait_target_disable(struct omap_hwmod *oh) { - if (!cpu_is_omap44xx()) - return 0; - - if (!oh) + if (!oh || !oh->clkdm) return -EINVAL; if (oh->_int_flags & _HWMOD_NO_MPU_PORT) @@ -1301,24 +1322,20 @@ static struct omap_hwmod *_lookup(const char *name) return oh; } + /** * _init_clkdm - look up a clockdomain name, store pointer in omap_hwmod * @oh: struct omap_hwmod * * * Convert a clockdomain name stored in a struct omap_hwmod into a * clockdomain pointer, and save it into the struct omap_hwmod. - * return -EINVAL if clkdm_name does not exist or if the lookup failed. + * Return -EINVAL if the clkdm_name lookup failed. */ static int _init_clkdm(struct omap_hwmod *oh) { - if (cpu_is_omap24xx() || cpu_is_omap34xx()) + if (!oh->clkdm_name) return 0; - if (!oh->clkdm_name) { - pr_warning("omap_hwmod: %s: no clkdm_name\n", oh->name); - return -EINVAL; - } - oh->clkdm = clkdm_lookup(oh->clkdm_name); if (!oh->clkdm) { pr_warning("omap_hwmod: %s: could not associate to clkdm %s\n", @@ -1354,7 +1371,8 @@ static int _init_clocks(struct omap_hwmod *oh, void *data) ret |= _init_main_clk(oh); ret |= _init_interface_clks(oh); ret |= _init_opt_clks(oh); - ret |= _init_clkdm(oh); + if (soc_ops.init_clkdm) + ret |= soc_ops.init_clkdm(oh); if (!ret) oh->_state = _HWMOD_STATE_CLKS_INITED; @@ -1365,53 +1383,6 @@ static int _init_clocks(struct omap_hwmod *oh, void *data) } /** - * _wait_target_ready - wait for a module to leave slave idle - * @oh: struct omap_hwmod * - * - * Wait for a module @oh to leave slave idle. Returns 0 if the module - * does not have an IDLEST bit or if the module successfully leaves - * slave idle; otherwise, pass along the return value of the - * appropriate *_cm*_wait_module_ready() function. - */ -static int _wait_target_ready(struct omap_hwmod *oh) -{ - struct omap_hwmod_ocp_if *os; - int ret; - - if (!oh) - return -EINVAL; - - if (oh->flags & HWMOD_NO_IDLEST) - return 0; - - os = _find_mpu_rt_port(oh); - if (!os) - return 0; - - /* XXX check module SIDLEMODE */ - - /* XXX check clock enable states */ - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - ret = omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs, - oh->prcm.omap2.idlest_reg_id, - oh->prcm.omap2.idlest_idle_bit); - } else if (cpu_is_omap44xx()) { - if (!oh->clkdm) - return -EINVAL; - - ret = omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition, - oh->clkdm->cm_inst, - oh->clkdm->clkdm_offs, - oh->prcm.omap4.clkctrl_offs); - } else { - BUG(); - }; - - return ret; -} - -/** * _lookup_hardreset - fill register bit info for this hwmod/reset line * @oh: struct omap_hwmod * * @name: name of the reset line in the context of this hwmod @@ -1447,32 +1418,31 @@ static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name, * @oh: struct omap_hwmod * * @name: name of the reset line to lookup and assert * - * Some IP like dsp, ipu or iva contain processor that require - * an HW reset line to be assert / deassert in order to enable fully - * the IP. + * Some IP like dsp, ipu or iva contain processor that require an HW + * reset line to be assert / deassert in order to enable fully the IP. + * Returns -EINVAL if @oh is null, -ENOSYS if we have no way of + * asserting the hardreset line on the currently-booted SoC, or passes + * along the return value from _lookup_hardreset() or the SoC's + * assert_hardreset code. */ static int _assert_hardreset(struct omap_hwmod *oh, const char *name) { struct omap_hwmod_rst_info ohri; - u8 ret; + u8 ret = -EINVAL; if (!oh) return -EINVAL; + if (!soc_ops.assert_hardreset) + return -ENOSYS; + ret = _lookup_hardreset(oh, name, &ohri); if (IS_ERR_VALUE(ret)) return ret; - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs, - ohri.rst_shift); - else if (cpu_is_omap44xx()) - return omap4_prminst_assert_hardreset(ohri.rst_shift, - oh->clkdm->pwrdm.ptr->prcm_partition, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); - else - return -EINVAL; + ret = soc_ops.assert_hardreset(oh, &ohri); + + return ret; } /** @@ -1481,38 +1451,29 @@ static int _assert_hardreset(struct omap_hwmod *oh, const char *name) * @oh: struct omap_hwmod * * @name: name of the reset line to look up and deassert * - * Some IP like dsp, ipu or iva contain processor that require - * an HW reset line to be assert / deassert in order to enable fully - * the IP. + * Some IP like dsp, ipu or iva contain processor that require an HW + * reset line to be assert / deassert in order to enable fully the IP. + * Returns -EINVAL if @oh is null, -ENOSYS if we have no way of + * deasserting the hardreset line on the currently-booted SoC, or passes + * along the return value from _lookup_hardreset() or the SoC's + * deassert_hardreset code. */ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) { struct omap_hwmod_rst_info ohri; - int ret; + int ret = -EINVAL; if (!oh) return -EINVAL; + if (!soc_ops.deassert_hardreset) + return -ENOSYS; + ret = _lookup_hardreset(oh, name, &ohri); if (IS_ERR_VALUE(ret)) return ret; - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - ret = omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs, - ohri.rst_shift, - ohri.st_shift); - } else if (cpu_is_omap44xx()) { - if (ohri.st_shift) - pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n", - oh->name, name); - ret = omap4_prminst_deassert_hardreset(ohri.rst_shift, - oh->clkdm->pwrdm.ptr->prcm_partition, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); - } else { - return -EINVAL; - } - + ret = soc_ops.deassert_hardreset(oh, &ohri); if (ret == -EBUSY) pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name); @@ -1525,31 +1486,28 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) * @oh: struct omap_hwmod * * @name: name of the reset line to look up and read * - * Return the state of the reset line. + * Return the state of the reset line. Returns -EINVAL if @oh is + * null, -ENOSYS if we have no way of reading the hardreset line + * status on the currently-booted SoC, or passes along the return + * value from _lookup_hardreset() or the SoC's is_hardreset_asserted + * code. */ static int _read_hardreset(struct omap_hwmod *oh, const char *name) { struct omap_hwmod_rst_info ohri; - u8 ret; + u8 ret = -EINVAL; if (!oh) return -EINVAL; + if (!soc_ops.is_hardreset_asserted) + return -ENOSYS; + ret = _lookup_hardreset(oh, name, &ohri); if (IS_ERR_VALUE(ret)) return ret; - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs, - ohri.st_shift); - } else if (cpu_is_omap44xx()) { - return omap4_prminst_is_hardreset_asserted(ohri.rst_shift, - oh->clkdm->pwrdm.ptr->prcm_partition, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); - } else { - return -EINVAL; - } + return soc_ops.is_hardreset_asserted(oh, &ohri); } /** @@ -1587,10 +1545,6 @@ static int _omap4_disable_module(struct omap_hwmod *oh) { int v; - /* The module mode does not exist prior OMAP4 */ - if (!cpu_is_omap44xx()) - return -EINVAL; - if (!oh->clkdm || !oh->prcm.omap4.modulemode) return -EINVAL; @@ -1830,9 +1784,11 @@ static int _enable(struct omap_hwmod *oh) } _enable_clocks(oh); - _enable_module(oh); + if (soc_ops.enable_module) + soc_ops.enable_module(oh); - r = _wait_target_ready(oh); + r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) : + -EINVAL; if (!r) { /* * Set the clockdomain to HW_AUTO only if the target is ready, @@ -1886,7 +1842,8 @@ static int _idle(struct omap_hwmod *oh) _idle_sysc(oh); _del_initiator_dep(oh, mpu_oh); - _omap4_disable_module(oh); + if (soc_ops.disable_module) + soc_ops.disable_module(oh); /* * The module must be in idle mode before disabling any parents @@ -1991,7 +1948,8 @@ static int _shutdown(struct omap_hwmod *oh) if (oh->_state == _HWMOD_STATE_ENABLED) { _del_initiator_dep(oh, mpu_oh); /* XXX what about the other system initiators here? dma, dsp */ - _omap4_disable_module(oh); + if (soc_ops.disable_module) + soc_ops.disable_module(oh); _disable_clocks(oh); if (oh->clkdm) clkdm_hwmod_disable(oh->clkdm, oh); @@ -2447,6 +2405,194 @@ static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois) return 0; } +/* Static functions intended only for use in soc_ops field function pointers */ + +/** + * _omap2_wait_target_ready - wait for a module to leave slave idle + * @oh: struct omap_hwmod * + * + * Wait for a module @oh to leave slave idle. Returns 0 if the module + * does not have an IDLEST bit or if the module successfully leaves + * slave idle; otherwise, pass along the return value of the + * appropriate *_cm*_wait_module_ready() function. + */ +static int _omap2_wait_target_ready(struct omap_hwmod *oh) +{ + if (!oh) + return -EINVAL; + + if (oh->flags & HWMOD_NO_IDLEST) + return 0; + + if (!_find_mpu_rt_port(oh)) + return 0; + + /* XXX check module SIDLEMODE, hardreset status, enabled clocks */ + + return omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs, + oh->prcm.omap2.idlest_reg_id, + oh->prcm.omap2.idlest_idle_bit); +} + +/** + * _omap4_wait_target_ready - wait for a module to leave slave idle + * @oh: struct omap_hwmod * + * + * Wait for a module @oh to leave slave idle. Returns 0 if the module + * does not have an IDLEST bit or if the module successfully leaves + * slave idle; otherwise, pass along the return value of the + * appropriate *_cm*_wait_module_ready() function. + */ +static int _omap4_wait_target_ready(struct omap_hwmod *oh) +{ + if (!oh || !oh->clkdm) + return -EINVAL; + + if (oh->flags & HWMOD_NO_IDLEST) + return 0; + + if (!_find_mpu_rt_port(oh)) + return 0; + + /* XXX check module SIDLEMODE, hardreset status */ + + return omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition, + oh->clkdm->cm_inst, + oh->clkdm->clkdm_offs, + oh->prcm.omap4.clkctrl_offs); +} + +/** + * _omap2_assert_hardreset - call OMAP2 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to assert hardreset + * @ohri: hardreset line data + * + * Call omap2_prm_assert_hardreset() with parameters extracted from + * the hwmod @oh and the hardreset line data @ohri. Only intended for + * use as an soc_ops function pointer. Passes along the return value + * from omap2_prm_assert_hardreset(). XXX This function is scheduled + * for removal when the PRM code is moved into drivers/. + */ +static int _omap2_assert_hardreset(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs, + ohri->rst_shift); +} + +/** + * _omap2_deassert_hardreset - call OMAP2 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to deassert hardreset + * @ohri: hardreset line data + * + * Call omap2_prm_deassert_hardreset() with parameters extracted from + * the hwmod @oh and the hardreset line data @ohri. Only intended for + * use as an soc_ops function pointer. Passes along the return value + * from omap2_prm_deassert_hardreset(). XXX This function is + * scheduled for removal when the PRM code is moved into drivers/. + */ +static int _omap2_deassert_hardreset(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + return omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs, + ohri->rst_shift, + ohri->st_shift); +} + +/** + * _omap2_is_hardreset_asserted - call OMAP2 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to test hardreset + * @ohri: hardreset line data + * + * Call omap2_prm_is_hardreset_asserted() with parameters extracted + * from the hwmod @oh and the hardreset line data @ohri. Only + * intended for use as an soc_ops function pointer. Passes along the + * return value from omap2_prm_is_hardreset_asserted(). XXX This + * function is scheduled for removal when the PRM code is moved into + * drivers/. + */ +static int _omap2_is_hardreset_asserted(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs, + ohri->st_shift); +} + +/** + * _omap4_assert_hardreset - call OMAP4 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to assert hardreset + * @ohri: hardreset line data + * + * Call omap4_prminst_assert_hardreset() with parameters extracted + * from the hwmod @oh and the hardreset line data @ohri. Only + * intended for use as an soc_ops function pointer. Passes along the + * return value from omap4_prminst_assert_hardreset(). XXX This + * function is scheduled for removal when the PRM code is moved into + * drivers/. + */ +static int _omap4_assert_hardreset(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + if (!oh->clkdm) + return -EINVAL; + + return omap4_prminst_assert_hardreset(ohri->rst_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); +} + +/** + * _omap4_deassert_hardreset - call OMAP4 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to deassert hardreset + * @ohri: hardreset line data + * + * Call omap4_prminst_deassert_hardreset() with parameters extracted + * from the hwmod @oh and the hardreset line data @ohri. Only + * intended for use as an soc_ops function pointer. Passes along the + * return value from omap4_prminst_deassert_hardreset(). XXX This + * function is scheduled for removal when the PRM code is moved into + * drivers/. + */ +static int _omap4_deassert_hardreset(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + if (!oh->clkdm) + return -EINVAL; + + if (ohri->st_shift) + pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n", + oh->name, ohri->name); + return omap4_prminst_deassert_hardreset(ohri->rst_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); +} + +/** + * _omap4_is_hardreset_asserted - call OMAP4 PRM hardreset fn with hwmod args + * @oh: struct omap_hwmod * to test hardreset + * @ohri: hardreset line data + * + * Call omap4_prminst_is_hardreset_asserted() with parameters + * extracted from the hwmod @oh and the hardreset line data @ohri. + * Only intended for use as an soc_ops function pointer. Passes along + * the return value from omap4_prminst_is_hardreset_asserted(). XXX + * This function is scheduled for removal when the PRM code is moved + * into drivers/. + */ +static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh, + struct omap_hwmod_rst_info *ohri) +{ + if (!oh->clkdm) + return -EINVAL; + + return omap4_prminst_is_hardreset_asserted(ohri->rst_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); +} + /* Public functions */ u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs) @@ -2579,12 +2725,18 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), * * Intended to be called early in boot before the clock framework is * initialized. If @ois is not null, will register all omap_hwmods - * listed in @ois that are valid for this chip. Returns 0. + * listed in @ois that are valid for this chip. Returns -EINVAL if + * omap_hwmod_init() hasn't been called before calling this function, + * -ENOMEM if the link memory area can't be allocated, or 0 upon + * success. */ int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois) { int r, i; + if (!inited) + return -EINVAL; + if (!ois) return 0; @@ -3417,3 +3569,32 @@ int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx) return 0; } + +/** + * omap_hwmod_init - initialize the hwmod code + * + * Sets up some function pointers needed by the hwmod code to operate on the + * currently-booted SoC. Intended to be called once during kernel init + * before any hwmods are registered. No return value. + */ +void __init omap_hwmod_init(void) +{ + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { + soc_ops.wait_target_ready = _omap2_wait_target_ready; + soc_ops.assert_hardreset = _omap2_assert_hardreset; + soc_ops.deassert_hardreset = _omap2_deassert_hardreset; + soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted; + } else if (cpu_is_omap44xx()) { + soc_ops.enable_module = _omap4_enable_module; + soc_ops.disable_module = _omap4_disable_module; + soc_ops.wait_target_ready = _omap4_wait_target_ready; + soc_ops.assert_hardreset = _omap4_assert_hardreset; + soc_ops.deassert_hardreset = _omap4_deassert_hardreset; + soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; + soc_ops.init_clkdm = _init_clkdm; + } else { + WARN(1, "omap_hwmod: unknown SoC type\n"); + } + + inited = true; +} diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index a7640d1b215..50cfab61b0e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -192,6 +192,11 @@ static struct omap_hwmod_class omap2420_mcbsp_hwmod_class = { .name = "mcbsp", }; +static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = { + { .role = "pad_fck", .clk = "mcbsp_clks" }, + { .role = "prcm_fck", .clk = "func_96m_ck" }, +}; + /* mcbsp1 */ static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = { { .name = "tx", .irq = 59 }, @@ -214,6 +219,8 @@ static struct omap_hwmod omap2420_mcbsp1_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp2 */ @@ -238,6 +245,8 @@ static struct omap_hwmod omap2420_mcbsp2_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; static struct omap_hwmod_class_sysconfig omap2420_msdi_sysc = { @@ -585,5 +594,6 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { int __init omap2420_hwmod_init(void) { + omap_hwmod_init(); return omap_hwmod_register_links(omap2420_hwmod_ocp_ifs); } diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 4d726498123..58b5bc196d3 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -296,6 +296,11 @@ static struct omap_hwmod_class omap2430_mcbsp_hwmod_class = { .rev = MCBSP_CONFIG_TYPE2, }; +static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = { + { .role = "pad_fck", .clk = "mcbsp_clks" }, + { .role = "prcm_fck", .clk = "func_96m_ck" }, +}; + /* mcbsp1 */ static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = { { .name = "tx", .irq = 59 }, @@ -320,6 +325,8 @@ static struct omap_hwmod omap2430_mcbsp1_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp2 */ @@ -345,6 +352,8 @@ static struct omap_hwmod omap2430_mcbsp2_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp3 */ @@ -370,6 +379,8 @@ static struct omap_hwmod omap2430_mcbsp3_hwmod = { .idlest_idle_bit = OMAP2430_ST_MCBSP3_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp4 */ @@ -401,6 +412,8 @@ static struct omap_hwmod omap2430_mcbsp4_hwmod = { .idlest_idle_bit = OMAP2430_ST_MCBSP4_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* mcbsp5 */ @@ -432,6 +445,8 @@ static struct omap_hwmod omap2430_mcbsp5_hwmod = { .idlest_idle_bit = OMAP2430_ST_MCBSP5_SHIFT, }, }, + .opt_clks = mcbsp_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks), }; /* MMC/SD/SDIO common */ @@ -938,5 +953,6 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = { int __init omap2430_hwmod_init(void) { + omap_hwmod_init(); return omap_hwmod_register_links(omap2430_hwmod_ocp_ifs); } diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index a8653af1969..892c7c74097 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1093,6 +1093,17 @@ static struct omap_hwmod_class omap3xxx_mcbsp_hwmod_class = { .rev = MCBSP_CONFIG_TYPE3, }; +/* McBSP functional clock mapping */ +static struct omap_hwmod_opt_clk mcbsp15_opt_clks[] = { + { .role = "pad_fck", .clk = "mcbsp_clks" }, + { .role = "prcm_fck", .clk = "core_96m_fck" }, +}; + +static struct omap_hwmod_opt_clk mcbsp234_opt_clks[] = { + { .role = "pad_fck", .clk = "mcbsp_clks" }, + { .role = "prcm_fck", .clk = "per_96m_fck" }, +}; + /* mcbsp1 */ static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = { { .name = "common", .irq = 16 }, @@ -1116,6 +1127,8 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP1_SHIFT, }, }, + .opt_clks = mcbsp15_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp15_opt_clks), }; /* mcbsp2 */ @@ -1145,6 +1158,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT, }, }, + .opt_clks = mcbsp234_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks), .dev_attr = &omap34xx_mcbsp2_dev_attr, }; @@ -1175,6 +1190,8 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT, }, }, + .opt_clks = mcbsp234_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks), .dev_attr = &omap34xx_mcbsp3_dev_attr, }; @@ -1207,6 +1224,8 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP4_SHIFT, }, }, + .opt_clks = mcbsp234_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks), }; /* mcbsp5 */ @@ -1238,6 +1257,8 @@ static struct omap_hwmod omap3xxx_mcbsp5_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP5_SHIFT, }, }, + .opt_clks = mcbsp15_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcbsp15_opt_clks), }; /* 'mcbsp sidetone' class */ @@ -3404,6 +3425,8 @@ int __init omap3xxx_hwmod_init(void) struct omap_hwmod_ocp_if **h = NULL; unsigned int rev; + omap_hwmod_init(); + /* Register hwmod links common to all OMAP3 */ r = omap_hwmod_register_links(omap3xxx_hwmod_ocp_ifs); if (r < 0) diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index b7bcba5221b..4cab6318d33 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2544,14 +2544,12 @@ static struct omap_hwmod omap44xx_prcm_mpu_hwmod = { static struct omap_hwmod omap44xx_cm_core_aon_hwmod = { .name = "cm_core_aon", .class = &omap44xx_prcm_hwmod_class, - .clkdm_name = "cm_clkdm", }; /* cm_core */ static struct omap_hwmod omap44xx_cm_core_hwmod = { .name = "cm_core", .class = &omap44xx_prcm_hwmod_class, - .clkdm_name = "cm_clkdm", }; /* prm */ @@ -2568,7 +2566,6 @@ static struct omap_hwmod_rst_info omap44xx_prm_resets[] = { static struct omap_hwmod omap44xx_prm_hwmod = { .name = "prm", .class = &omap44xx_prcm_hwmod_class, - .clkdm_name = "prm_clkdm", .mpu_irqs = omap44xx_prm_irqs, .rst_lines = omap44xx_prm_resets, .rst_lines_cnt = ARRAY_SIZE(omap44xx_prm_resets), @@ -6148,6 +6145,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { int __init omap44xx_hwmod_init(void) { + omap_hwmod_init(); return omap_hwmod_register_links(omap44xx_hwmod_ocp_ifs); } diff --git a/arch/arm/mach-omap2/usb-fs.c b/arch/arm/mach-omap2/usb-fs.c deleted file mode 100644 index 1481078763b..00000000000 --- a/arch/arm/mach-omap2/usb-fs.c +++ /dev/null @@ -1,359 +0,0 @@ -/* - * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx - * - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/err.h> - -#include <asm/irq.h> - -#include <plat/usb.h> -#include <plat/board.h> - -#include "control.h" -#include "mux.h" - -#define INT_USB_IRQ_GEN INT_24XX_USB_IRQ_GEN -#define INT_USB_IRQ_NISO INT_24XX_USB_IRQ_NISO -#define INT_USB_IRQ_ISO INT_24XX_USB_IRQ_ISO -#define INT_USB_IRQ_HGEN INT_24XX_USB_IRQ_HGEN -#define INT_USB_IRQ_OTG INT_24XX_USB_IRQ_OTG - -#if defined(CONFIG_ARCH_OMAP2) - -#ifdef CONFIG_USB_GADGET_OMAP - -static struct resource udc_resources[] = { - /* order is significant! */ - { /* registers */ - .start = UDC_BASE, - .end = UDC_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { /* general IRQ */ - .start = INT_USB_IRQ_GEN, - .flags = IORESOURCE_IRQ, - }, { /* PIO IRQ */ - .start = INT_USB_IRQ_NISO, - .flags = IORESOURCE_IRQ, - }, { /* SOF IRQ */ - .start = INT_USB_IRQ_ISO, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 udc_dmamask = ~(u32)0; - -static struct platform_device udc_device = { - .name = "omap_udc", - .id = -1, - .dev = { - .dma_mask = &udc_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(udc_resources), - .resource = udc_resources, -}; - -static inline void udc_device_init(struct omap_usb_config *pdata) -{ - pdata->udc_device = &udc_device; -} - -#else - -static inline void udc_device_init(struct omap_usb_config *pdata) -{ -} - -#endif - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - -/* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = ~(u32)0; - -static struct resource ohci_resources[] = { - { - .start = OMAP_OHCI_BASE, - .end = OMAP_OHCI_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_IRQ_HGEN, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ohci_device = { - .name = "ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(ohci_resources), - .resource = ohci_resources, -}; - -static inline void ohci_device_init(struct omap_usb_config *pdata) -{ - pdata->ohci_device = &ohci_device; -} - -#else - -static inline void ohci_device_init(struct omap_usb_config *pdata) -{ -} - -#endif - -#if defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG) - -static struct resource otg_resources[] = { - /* order is significant! */ - { - .start = OTG_BASE, - .end = OTG_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = INT_USB_IRQ_OTG, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device otg_device = { - .name = "omap_otg", - .id = -1, - .num_resources = ARRAY_SIZE(otg_resources), - .resource = otg_resources, -}; - -static inline void otg_device_init(struct omap_usb_config *pdata) -{ - pdata->otg_device = &otg_device; -} - -#else - -static inline void otg_device_init(struct omap_usb_config *pdata) -{ -} - -#endif - -static void omap2_usb_devconf_clear(u8 port, u32 mask) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r &= ~USBTXWRMODEI(port, mask); - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static void omap2_usb_devconf_set(u8 port, u32 mask) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r |= USBTXWRMODEI(port, mask); - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static void omap2_usb2_disable_5pinbitll(void) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI); - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static void omap2_usb2_enable_5pinunitll(void) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI; - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static u32 __init omap2_usb0_init(unsigned nwires, unsigned is_device) -{ - u32 syscon1 = 0; - - omap2_usb_devconf_clear(0, USB_BIDIR_TLL); - - if (nwires == 0) - return 0; - - if (is_device) - omap_mux_init_signal("usb0_puen", 0); - - omap_mux_init_signal("usb0_dat", 0); - omap_mux_init_signal("usb0_txen", 0); - omap_mux_init_signal("usb0_se0", 0); - if (nwires != 3) - omap_mux_init_signal("usb0_rcv", 0); - - switch (nwires) { - case 3: - syscon1 = 2; - omap2_usb_devconf_set(0, USB_BIDIR); - break; - case 4: - syscon1 = 1; - omap2_usb_devconf_set(0, USB_BIDIR); - break; - case 6: - syscon1 = 3; - omap_mux_init_signal("usb0_vp", 0); - omap_mux_init_signal("usb0_vm", 0); - omap2_usb_devconf_set(0, USB_UNIDIR); - break; - default: - printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", - 0, nwires); - } - - return syscon1 << 16; -} - -static u32 __init omap2_usb1_init(unsigned nwires) -{ - u32 syscon1 = 0; - - omap2_usb_devconf_clear(1, USB_BIDIR_TLL); - - if (nwires == 0) - return 0; - - /* NOTE: board-specific code must set up pin muxing for usb1, - * since each signal could come out on either of two balls. - */ - - switch (nwires) { - case 2: - /* NOTE: board-specific code must override this setting if - * this TLL link is not using DP/DM - */ - syscon1 = 1; - omap2_usb_devconf_set(1, USB_BIDIR_TLL); - break; - case 3: - syscon1 = 2; - omap2_usb_devconf_set(1, USB_BIDIR); - break; - case 4: - syscon1 = 1; - omap2_usb_devconf_set(1, USB_BIDIR); - break; - case 6: - default: - printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", - 1, nwires); - } - - return syscon1 << 20; -} - -static u32 __init omap2_usb2_init(unsigned nwires, unsigned alt_pingroup) -{ - u32 syscon1 = 0; - - omap2_usb2_disable_5pinbitll(); - alt_pingroup = 0; - - /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */ - if (alt_pingroup || nwires == 0) - return 0; - - omap_mux_init_signal("usb2_dat", 0); - omap_mux_init_signal("usb2_se0", 0); - if (nwires > 2) - omap_mux_init_signal("usb2_txen", 0); - if (nwires > 3) - omap_mux_init_signal("usb2_rcv", 0); - - switch (nwires) { - case 2: - /* NOTE: board-specific code must override this setting if - * this TLL link is not using DP/DM - */ - syscon1 = 1; - omap2_usb_devconf_set(2, USB_BIDIR_TLL); - break; - case 3: - syscon1 = 2; - omap2_usb_devconf_set(2, USB_BIDIR); - break; - case 4: - syscon1 = 1; - omap2_usb_devconf_set(2, USB_BIDIR); - break; - case 5: - /* NOTE: board-specific code must mux this setting depending - * on TLL link using DP/DM. Something must also - * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED} - * 2420: hdq_sio.usb2_tllse0 or vlynq_rx0.usb2_tllse0 - * 2430: hdq_sio.usb2_tllse0 or sdmmc2_dat0.usb2_tllse0 - */ - - syscon1 = 3; - omap2_usb2_enable_5pinunitll(); - break; - case 6: - default: - printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", - 2, nwires); - } - - return syscon1 << 24; -} - -void __init omap2_usbfs_init(struct omap_usb_config *pdata) -{ - struct clk *ick; - - if (!cpu_is_omap24xx()) - return; - - ick = clk_get(NULL, "usb_l4_ick"); - if (IS_ERR(ick)) - return; - - clk_enable(ick); - pdata->usb0_init = omap2_usb0_init; - pdata->usb1_init = omap2_usb1_init; - pdata->usb2_init = omap2_usb2_init; - udc_device_init(pdata); - ohci_device_init(pdata); - otg_device_init(pdata); - omap_otg_init(pdata); - clk_disable(ick); - clk_put(ick); -} - -#endif diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c index 084604be6ad..87e75a250d5 100644 --- a/arch/arm/mach-s3c24xx/common-smdk.c +++ b/arch/arm/mach-s3c24xx/common-smdk.c @@ -182,19 +182,21 @@ static struct platform_device __initdata *smdk_devs[] = { &smdk_led7, }; +static const struct gpio smdk_led_gpios[] = { + { S3C2410_GPF(4), GPIOF_OUT_INIT_HIGH, NULL }, + { S3C2410_GPF(5), GPIOF_OUT_INIT_HIGH, NULL }, + { S3C2410_GPF(6), GPIOF_OUT_INIT_HIGH, NULL }, + { S3C2410_GPF(7), GPIOF_OUT_INIT_HIGH, NULL }, +}; + void __init smdk_machine_init(void) { /* Configure the LEDs (even if we have no LED support)*/ - s3c_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT); - s3c_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT); - s3c_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT); - s3c_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT); - - s3c2410_gpio_setpin(S3C2410_GPF(4), 1); - s3c2410_gpio_setpin(S3C2410_GPF(5), 1); - s3c2410_gpio_setpin(S3C2410_GPF(6), 1); - s3c2410_gpio_setpin(S3C2410_GPF(7), 1); + int ret = gpio_request_array(smdk_led_gpios, + ARRAY_SIZE(smdk_led_gpios)); + if (!WARN_ON(ret < 0)) + gpio_free_array(smdk_led_gpios, ARRAY_SIZE(smdk_led_gpios)); if (machine_is_smdk2443()) smdk_nand_info.twrph0 = 50; diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 56cdd34cce4..0c9e9a785ef 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -41,7 +41,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/regs-clock.h> #include <mach/regs-gpio.h> #include <plat/regs-serial.h> diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h b/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h deleted file mode 100644 index 4c38b39b741..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h +++ /dev/null @@ -1,40 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/bast-pmu.h - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * Vincent Sanders <vince@simtec.co.uk> - * - * Machine BAST - Power Management chip - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_BASTPMU_H -#define __ASM_ARCH_BASTPMU_H "08_OCT_2004" - -#define BASTPMU_REG_IDENT (0x00) -#define BASTPMU_REG_VERSION (0x01) -#define BASTPMU_REG_DDCCTRL (0x02) -#define BASTPMU_REG_POWER (0x03) -#define BASTPMU_REG_RESET (0x04) -#define BASTPMU_REG_GWO (0x05) -#define BASTPMU_REG_WOL (0x06) -#define BASTPMU_REG_WOR (0x07) -#define BASTPMU_REG_UID (0x09) - -#define BASTPMU_EEPROM (0xC0) - -#define BASTPMU_EEP_UID (BASTPMU_EEPROM + 0) -#define BASTPMU_EEP_WOL (BASTPMU_EEPROM + 8) -#define BASTPMU_EEP_WOR (BASTPMU_EEPROM + 9) - -#define BASTPMU_IDENT_0 0x53 -#define BASTPMU_IDENT_1 0x42 -#define BASTPMU_IDENT_2 0x50 -#define BASTPMU_IDENT_3 0x4d - -#define BASTPMU_RESET_GUARD (0x55) - -#endif /* __ASM_ARCH_BASTPMU_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h index 019ea86057f..3890a05948f 100644 --- a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h +++ b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h @@ -93,26 +93,5 @@ enum s3c_gpio_number { #define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr)) #define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr)) -/* compatibility until drivers can be modified */ - -#define S3C2410_GPA0 S3C2410_GPA(0) -#define S3C2410_GPA1 S3C2410_GPA(1) -#define S3C2410_GPA3 S3C2410_GPA(3) -#define S3C2410_GPA7 S3C2410_GPA(7) - -#define S3C2410_GPE0 S3C2410_GPE(0) -#define S3C2410_GPE1 S3C2410_GPE(1) -#define S3C2410_GPE2 S3C2410_GPE(2) -#define S3C2410_GPE3 S3C2410_GPE(3) -#define S3C2410_GPE4 S3C2410_GPE(4) -#define S3C2410_GPE5 S3C2410_GPE(5) -#define S3C2410_GPE6 S3C2410_GPE(6) -#define S3C2410_GPE7 S3C2410_GPE(7) -#define S3C2410_GPE8 S3C2410_GPE(8) -#define S3C2410_GPE9 S3C2410_GPE(9) -#define S3C2410_GPE10 S3C2410_GPE(10) - -#define S3C2410_GPH10 S3C2410_GPH(10) - #endif /* __MACH_GPIONRS_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/gta02.h b/arch/arm/mach-s3c24xx/include/mach/gta02.h index 3a56a229cac..21739348215 100644 --- a/arch/arm/mach-s3c24xx/include/mach/gta02.h +++ b/arch/arm/mach-s3c24xx/include/mach/gta02.h @@ -3,82 +3,13 @@ #include <mach/regs-gpio.h> -/* Different hardware revisions, passed in ATAG_REVISION by u-boot */ -#define GTA02v1_SYSTEM_REV 0x00000310 -#define GTA02v2_SYSTEM_REV 0x00000320 -#define GTA02v3_SYSTEM_REV 0x00000330 -#define GTA02v4_SYSTEM_REV 0x00000340 -#define GTA02v5_SYSTEM_REV 0x00000350 -/* since A7 is basically same as A6, we use A6 PCB ID */ -#define GTA02v6_SYSTEM_REV 0x00000360 - -#define GTA02_GPIO_n3DL_GSM S3C2410_GPA(13) /* v1 + v2 + v3 only */ - -#define GTA02_GPIO_PWR_LED1 S3C2410_GPB(0) -#define GTA02_GPIO_PWR_LED2 S3C2410_GPB(1) #define GTA02_GPIO_AUX_LED S3C2410_GPB(2) -#define GTA02_GPIO_VIBRATOR_ON S3C2410_GPB(3) -#define GTA02_GPIO_MODEM_RST S3C2410_GPB(5) -#define GTA02_GPIO_BT_EN S3C2410_GPB(6) -#define GTA02_GPIO_MODEM_ON S3C2410_GPB(7) -#define GTA02_GPIO_EXTINT8 S3C2410_GPB(8) #define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9) - -#define GTA02_GPIO_PIO5 S3C2410_GPC(5) /* v3 + v4 only */ - -#define GTA02v3_GPIO_nG1_CS S3C2410_GPD(12) /* v3 + v4 only */ -#define GTA02v3_GPIO_nG2_CS S3C2410_GPD(13) /* v3 + v4 only */ -#define GTA02v5_GPIO_HDQ S3C2410_GPD(14) /* v5 + */ - -#define GTA02_GPIO_nG1_INT S3C2410_GPF(0) -#define GTA02_GPIO_IO1 S3C2410_GPF(1) -#define GTA02_GPIO_PIO_2 S3C2410_GPF(2) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_JACK_INSERT S3C2410_GPF(4) -#define GTA02_GPIO_WLAN_GPIO1 S3C2410_GPF(5) /* v2 + v3 + v4 only */ #define GTA02_GPIO_AUX_KEY S3C2410_GPF(6) #define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7) - -#define GTA02_GPIO_3D_IRQ S3C2410_GPG(4) -#define GTA02v2_GPIO_nG2_INT S3C2410_GPG(8) /* v2 + v3 + v4 only */ -#define GTA02v3_GPIO_nUSB_OC S3C2410_GPG(9) /* v3 + v4 only */ -#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */ -#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */ - #define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */ -#define GTA02v1_GPIO_WLAN_GPIO10 S3C2410_GPJ(2) #define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_INT0 S3C2410_GPJ(3) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_nGSM_EN S3C2410_GPJ(4) -#define GTA02_GPIO_3D_RESET S3C2410_GPJ(5) -#define GTA02_GPIO_nDL_GSM S3C2410_GPJ(6) /* v4 + v5 only */ -#define GTA02_GPIO_WLAN_GPIO0 S3C2410_GPJ(7) -#define GTA02v1_GPIO_BAT_ID S3C2410_GPJ(8) -#define GTA02_GPIO_KEEPACT S3C2410_GPJ(8) -#define GTA02v1_GPIO_HP_IN S3C2410_GPJ(10) -#define GTA02_CHIP_PWD S3C2410_GPJ(11) /* v2 + v3 + v4 only */ -#define GTA02_GPIO_nWLAN_RESET S3C2410_GPJ(12) /* v2 + v3 + v4 only */ -#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0 -#define GTA02_IRQ_MODEM IRQ_EINT1 -#define GTA02_IRQ_PIO_2 IRQ_EINT2 /* v2 + v3 + v4 only */ -#define GTA02_IRQ_nJACK_INSERT IRQ_EINT4 -#define GTA02_IRQ_WLAN_GPIO1 IRQ_EINT5 -#define GTA02_IRQ_AUX IRQ_EINT6 -#define GTA02_IRQ_nHOLD IRQ_EINT7 #define GTA02_IRQ_PCF50633 IRQ_EINT9 -#define GTA02_IRQ_3D IRQ_EINT12 -#define GTA02_IRQ_GSENSOR_2 IRQ_EINT16 /* v2 + v3 + v4 only */ -#define GTA02v3_IRQ_nUSB_OC IRQ_EINT17 /* v3 + v4 only */ -#define GTA02v3_IRQ_nUSB_FLT IRQ_EINT18 /* v3 + v4 only */ -#define GTA02v3_IRQ_nGSM_OC IRQ_EINT19 /* v3 + v4 only */ - -/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */ -#define GTA02_PCB_ID1_0 S3C2410_GPC(13) -#define GTA02_PCB_ID1_1 S3C2410_GPC(15) -#define GTA02_PCB_ID1_2 S3C2410_GPD(0) -#define GTA02_PCB_ID2_0 S3C2410_GPD(3) -#define GTA02_PCB_ID2_1 S3C2410_GPD(4) - -int gta02_get_pcb_revision(void); #endif /* _GTA02_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h index cac1ad6b582..a11a638bd59 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h @@ -302,7 +302,7 @@ /* S3C2410: * Port G consists of 8 GPIO/IRQ/Special function * - * GPGCON has 2 bits for each of the input pins on port F + * GPGCON has 2 bits for each of the input pins on port G * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func * * pull up works like all other ports. @@ -366,7 +366,7 @@ /* Port H consists of11 GPIO/serial/Misc pins * - * GPGCON has 2 bits for each of the input pins on port F + * GPHCON has 2 bits for each of the input pins on port H * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func * * pull up works like all other ports. @@ -427,6 +427,19 @@ * for the 2412/2413 from the 2410/2440/2442 */ +/* + * Port J consists of 13 GPIO/Camera pins. GPJCON has 2 bits + * for each of the pins on port J. + * 00 - input, 01 output, 10 - camera + * + * Pull up works like all other ports. + */ + +#define S3C2413_GPJCON S3C2410_GPIOREG(0x80) +#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) +#define S3C2413_GPJUP S3C2410_GPIOREG(0x88) +#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) + /* S3C2443 and above */ #define S3C2440_GPJCON S3C2410_GPIOREG(0xD0) #define S3C2440_GPJDAT S3C2410_GPIOREG(0xD4) diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h deleted file mode 100644 index 19575e06111..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h +++ /dev/null @@ -1,70 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-gpioj.h - * - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2440 GPIO J register definitions -*/ - - -#ifndef __ASM_ARCH_REGS_GPIOJ_H -#define __ASM_ARCH_REGS_GPIOJ_H "gpioj" - -/* Port J consists of 13 GPIO/Camera pins - * - * GPJCON has 2 bits for each of the input pins on port F - * 00 = 0 input, 1 output, 2 Camera - * - * pull up works like all other ports. -*/ - -#define S3C2413_GPJCON S3C2410_GPIOREG(0x80) -#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) -#define S3C2413_GPJUP S3C2410_GPIOREG(0x88) -#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) - -#define S3C2440_GPJ0_OUTP (0x01 << 0) -#define S3C2440_GPJ0_CAMDATA0 (0x02 << 0) - -#define S3C2440_GPJ1_OUTP (0x01 << 2) -#define S3C2440_GPJ1_CAMDATA1 (0x02 << 2) - -#define S3C2440_GPJ2_OUTP (0x01 << 4) -#define S3C2440_GPJ2_CAMDATA2 (0x02 << 4) - -#define S3C2440_GPJ3_OUTP (0x01 << 6) -#define S3C2440_GPJ3_CAMDATA3 (0x02 << 6) - -#define S3C2440_GPJ4_OUTP (0x01 << 8) -#define S3C2440_GPJ4_CAMDATA4 (0x02 << 8) - -#define S3C2440_GPJ5_OUTP (0x01 << 10) -#define S3C2440_GPJ5_CAMDATA5 (0x02 << 10) - -#define S3C2440_GPJ6_OUTP (0x01 << 12) -#define S3C2440_GPJ6_CAMDATA6 (0x02 << 12) - -#define S3C2440_GPJ7_OUTP (0x01 << 14) -#define S3C2440_GPJ7_CAMDATA7 (0x02 << 14) - -#define S3C2440_GPJ8_OUTP (0x01 << 16) -#define S3C2440_GPJ8_CAMPCLK (0x02 << 16) - -#define S3C2440_GPJ9_OUTP (0x01 << 18) -#define S3C2440_GPJ9_CAMVSYNC (0x02 << 18) - -#define S3C2440_GPJ10_OUTP (0x01 << 20) -#define S3C2440_GPJ10_CAMHREF (0x02 << 20) - -#define S3C2440_GPJ11_OUTP (0x01 << 22) -#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22) - -#define S3C2440_GPJ12_OUTP (0x01 << 24) -#define S3C2440_GPJ12_CAMRESET (0x02 << 24) - -#endif /* __ASM_ARCH_REGS_GPIOJ_H */ - diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index 0f29f64a3ee..92e1f93a6bc 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -71,7 +71,6 @@ #include <mach/regs-irq.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/fb.h> #include <plat/usb-control.h> diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index f092b188ab7..bd6d2525deb 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -634,8 +634,8 @@ static void __init mini2440_init(void) s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND); /* Turn the backlight early on */ - WARN_ON(gpio_request(S3C2410_GPG(4), "backlight")); - gpio_direction_output(S3C2410_GPG(4), 1); + WARN_ON(gpio_request_one(S3C2410_GPG(4), GPIOF_OUT_INIT_HIGH, NULL)); + gpio_free(S3C2410_GPG(4)); /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */ s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP); diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index b868dddcb83..678bbca2b5e 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -47,7 +47,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <mach/regs-gpio.h> #include <mach/leds-gpio.h> #include <mach/regs-lcd.h> #include <plat/regs-serial.h> @@ -325,8 +324,9 @@ static void __init qt2410_machine_init(void) } s3c24xx_fb_set_platdata(&qt2410_fb_info); - s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_setpin(S3C2410_GPB(0), 1); + /* set initial state of the LED GPIO */ + WARN_ON(gpio_request_one(S3C2410_GPB(0), GPIOF_OUT_INIT_HIGH, NULL)); + gpio_free(S3C2410_GPB(0)); s3c24xx_udc_set_platdata(&qt2410_udc_cfg); s3c_i2c0_set_platdata(NULL); diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index a6762aae472..7ee73f27f20 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -42,7 +42,6 @@ #include <asm/mach-types.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/regs-lcd.h> #include <mach/h1940.h> #include <mach/fb.h> diff --git a/arch/arm/mach-s3c24xx/pm-s3c2410.c b/arch/arm/mach-s3c24xx/pm-s3c2410.c index 03f706dd600..949ae05e07c 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2410.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2410.c @@ -77,8 +77,10 @@ static void s3c2410_pm_prepare(void) __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM)); } - if ( machine_is_aml_m5900() ) - s3c2410_gpio_setpin(S3C2410_GPF(2), 1); + if (machine_is_aml_m5900()) { + gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_HIGH, NULL); + gpio_free(S3C2410_GPF(2)); + } if (machine_is_rx1950()) { /* According to S3C2442 user's manual, page 7-17, @@ -103,8 +105,10 @@ static void s3c2410_pm_resume(void) tmp &= S3C2410_GSTATUS2_OFFRESET; __raw_writel(tmp, S3C2410_GSTATUS2); - if ( machine_is_aml_m5900() ) - s3c2410_gpio_setpin(S3C2410_GPF(2), 0); + if (machine_is_aml_m5900()) { + gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL); + gpio_free(S3C2410_GPF(2)); + } } struct syscore_ops s3c2410_pm_syscore_ops = { diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c index d04588506ec..c60f67a75af 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2412.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c @@ -26,7 +26,6 @@ #include <asm/irq.h> #include <mach/regs-power.h> -#include <mach/regs-gpioj.h> #include <mach/regs-gpio.h> #include <mach/regs-dsc.h> diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index d4bc7f960bb..6c5f4031ff0 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -39,7 +39,6 @@ #include <plat/regs-serial.h> #include <mach/regs-power.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/regs-dsc.h> #include <plat/regs-spi.h> #include <mach/regs-s3c2412.h> diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index 6f74118f60c..b0b60a1154d 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -36,7 +36,6 @@ #include <mach/regs-clock.h> #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <mach/regs-gpioj.h> #include <mach/regs-dsc.h> #include <plat/s3c2410.h> diff --git a/arch/arm/mach-s3c24xx/setup-ts.c b/arch/arm/mach-s3c24xx/setup-ts.c index ed263866367..4e11affce3a 100644 --- a/arch/arm/mach-s3c24xx/setup-ts.c +++ b/arch/arm/mach-s3c24xx/setup-ts.c @@ -16,7 +16,6 @@ struct platform_device; /* don't need the contents */ #include <mach/hardware.h> -#include <mach/regs-gpio.h> /** * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems @@ -27,8 +26,5 @@ struct platform_device; /* don't need the contents */ */ void s3c24xx_ts_cfg_gpio(struct platform_device *dev) { - s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON); - s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON); - s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON); - s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON); + s3c_gpio_cfgpin_range(S3C2410_GPG(12), 4, S3C_GPIO_SFN(3)); } diff --git a/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h deleted file mode 100644 index 9d0c43b4b68..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h - * - * Copyright (C) 2009 Samsung Electronics Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S3C64XX_PLAT_SPI_CLKS_H -#define __S3C64XX_PLAT_SPI_CLKS_H __FILE__ - -#define S3C64XX_SPI_SRCCLK_PCLK 0 -#define S3C64XX_SPI_SRCCLK_SPIBUS 1 -#define S3C64XX_SPI_SRCCLK_48M 2 - -#endif /* __S3C64XX_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c index 2ee5dc069b3..9c4ce085f58 100644 --- a/arch/arm/mach-s5p64x0/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -36,8 +36,6 @@ #include <plat/devs.h> #include <plat/irqs.h> -static u64 dma_dmamask = DMA_BIT_MASK(32); - static u8 s5p6440_pdma_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, diff --git a/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h deleted file mode 100644 index 170a20a9643..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h +++ /dev/null @@ -1,20 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SPI_CLKS_H -#define __ASM_ARCH_SPI_CLKS_H __FILE__ - -#define S5P64X0_SPI_SRCCLK_PCLK 0 -#define S5P64X0_SPI_SRCCLK_SCLK 1 - -#endif /* __ASM_ARCH_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c index afd8db2d599..b1418409709 100644 --- a/arch/arm/mach-s5pc100/dma.c +++ b/arch/arm/mach-s5pc100/dma.c @@ -33,8 +33,6 @@ #include <mach/irqs.h> #include <mach/dma.h> -static u64 dma_dmamask = DMA_BIT_MASK(32); - static u8 pdma0_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, diff --git a/arch/arm/mach-s5pc100/include/mach/spi-clocks.h b/arch/arm/mach-s5pc100/include/mach/spi-clocks.h deleted file mode 100644 index 65e426370bb..00000000000 --- a/arch/arm/mach-s5pc100/include/mach/spi-clocks.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/spi-clocks.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S5PC100_PLAT_SPI_CLKS_H -#define __S5PC100_PLAT_SPI_CLKS_H __FILE__ - -#define S5PC100_SPI_SRCCLK_PCLK 0 -#define S5PC100_SPI_SRCCLK_48M 1 -#define S5PC100_SPI_SRCCLK_SPIBUS 2 - -#endif /* __S5PC100_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/spi-clocks.h b/arch/arm/mach-s5pv210/include/mach/spi-clocks.h deleted file mode 100644 index 02acded5f73..00000000000 --- a/arch/arm/mach-s5pv210/include/mach/spi-clocks.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/spi-clocks.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S5PV210_PLAT_SPI_CLKS_H -#define __S5PV210_PLAT_SPI_CLKS_H __FILE__ - -#define S5PV210_SPI_SRCCLK_PCLK 0 -#define S5PV210_SPI_SRCCLK_SCLK 1 - -#endif /* __S5PV210_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 6a113a9bb87..7c407393cd0 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -63,7 +63,6 @@ comment "Tegra board type" config MACH_HARMONY bool "Harmony board" depends on ARCH_TEGRA_2x_SOC - select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC help Support for nVidia Harmony development platform @@ -71,7 +70,6 @@ config MACH_KAEN bool "Kaen board" depends on ARCH_TEGRA_2x_SOC select MACH_SEABOARD - select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC help Support for the Kaen version of Seaboard @@ -84,7 +82,6 @@ config MACH_PAZ00 config MACH_SEABOARD bool "Seaboard board" depends on ARCH_TEGRA_2x_SOC - select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC help Support for nVidia Seaboard development platform. It will also be included for some of the derivative boards that diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 2eb4445ddb1..35253fdd1ba 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -8,9 +8,9 @@ obj-y += timer.o obj-y += fuse.o obj-y += pmc.o obj-y += flowctrl.o +obj-y += powergate.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_CPU_IDLE) += sleep.o -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += powergate.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot index 9a82094092d..8040345bd97 100644 --- a/arch/arm/mach-tegra/Makefile.boot +++ b/arch/arm/mach-tegra/Makefile.boot @@ -2,9 +2,9 @@ zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) += 0x00008000 params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000 -dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb -dtb-$(CONFIG_MACH_PAZ00) += tegra-paz00.dtb -dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb -dtb-$(CONFIG_MACH_TRIMSLICE) += tegra-trimslice.dtb -dtb-$(CONFIG_MACH_VENTANA) += tegra-ventana.dtb -dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra-cardhu.dtb +dtb-$(CONFIG_MACH_HARMONY) += tegra20-harmony.dtb +dtb-$(CONFIG_MACH_PAZ00) += tegra20-paz00.dtb +dtb-$(CONFIG_MACH_SEABOARD) += tegra20-seaboard.dtb +dtb-$(CONFIG_MACH_TRIMSLICE) += tegra20-trimslice.dtb +dtb-$(CONFIG_MACH_VENTANA) += tegra20-ventana.dtb +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c index d83a8c0296f..566e2f88899 100644 --- a/arch/arm/mach-tegra/cpuidle.c +++ b/arch/arm/mach-tegra/cpuidle.c @@ -27,9 +27,9 @@ #include <linux/cpuidle.h> #include <linux/hrtimer.h> -#include <mach/iomap.h> +#include <asm/proc-fns.h> -extern void tegra_cpu_wfi(void); +#include <mach/iomap.h> static int tegra_idle_enter_lp3(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); @@ -64,7 +64,7 @@ static int tegra_idle_enter_lp3(struct cpuidle_device *dev, enter = ktime_get(); - tegra_cpu_wfi(); + cpu_do_idle(); exit = ktime_sub(ktime_get(), enter); us = ktime_to_us(exit); diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 5b20197bae7..d29b156a801 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -62,32 +62,3 @@ movw \reg, #:lower16:\val movt \reg, #:upper16:\val .endm - -/* - * tegra_cpu_wfi - * - * puts current CPU in clock-gated wfi using the flow controller - * - * corrupts r0-r3 - * must be called with MMU on - */ - -ENTRY(tegra_cpu_wfi) - cpu_id r0 - cpu_to_halt_reg r1, r0 - cpu_to_csr_reg r2, r0 - mov32 r0, TEGRA_FLOW_CTRL_VIRT - mov r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG - str r3, [r0, r2] @ clear event & interrupt status - mov r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT | FLOW_CTRL_JTAG_RESUME - str r3, [r0, r1] @ put flow controller in wait irq mode - dsb - wfi - mov r3, #0 - str r3, [r0, r1] @ clear flow controller halt status - mov r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG - str r3, [r0, r2] @ clear event & interrupt status - dsb - mov pc, lr -ENDPROC(tegra_cpu_wfi) - diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index ed8605f0115..6d87532871c 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := common.o sram.o clock.o devices.o dma.o mux.o \ - usb.o fb.o counter_32k.o + fb.o counter_32k.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index cb16ade437c..7fe626761e5 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -573,22 +573,25 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode); static inline void omap_enable_channel_irq(int lch) { - u32 status; - /* Clear CSR */ if (cpu_class_is_omap1()) - status = p->dma_read(CSR, lch); - else if (cpu_class_is_omap2()) + p->dma_read(CSR, lch); + else p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); /* Enable some nice interrupts. */ p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch); } -static void omap_disable_channel_irq(int lch) +static inline void omap_disable_channel_irq(int lch) { - if (cpu_class_is_omap2()) - p->dma_write(0, CICR, lch); + /* disable channel interrupts */ + p->dma_write(0, CICR, lch); + /* Clear CSR */ + if (cpu_class_is_omap1()) + p->dma_read(CSR, lch); + else + p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); } void omap_enable_dma_irq(int lch, u16 bits) @@ -632,14 +635,14 @@ static inline void disable_lnk(int lch) l = p->dma_read(CLNK_CTRL, lch); /* Disable interrupts */ + omap_disable_channel_irq(lch); + if (cpu_class_is_omap1()) { - p->dma_write(0, CICR, lch); /* Set the STOP_LNK bit */ l |= 1 << 14; } if (cpu_class_is_omap2()) { - omap_disable_channel_irq(lch); /* Clear the ENABLE_LNK bit */ l &= ~(1 << 15); } @@ -657,6 +660,9 @@ static inline void omap2_enable_irq_lch(int lch) return; spin_lock_irqsave(&dma_chan_lock, flags); + /* clear IRQ STATUS */ + p->dma_write(1 << lch, IRQSTATUS_L0, lch); + /* Enable interrupt */ val = p->dma_read(IRQENABLE_L0, lch); val |= 1 << lch; p->dma_write(val, IRQENABLE_L0, lch); @@ -672,9 +678,12 @@ static inline void omap2_disable_irq_lch(int lch) return; spin_lock_irqsave(&dma_chan_lock, flags); + /* Disable interrupt */ val = p->dma_read(IRQENABLE_L0, lch); val &= ~(1 << lch); p->dma_write(val, IRQENABLE_L0, lch); + /* clear IRQ STATUS */ + p->dma_write(1 << lch, IRQSTATUS_L0, lch); spin_unlock_irqrestore(&dma_chan_lock, flags); } @@ -745,11 +754,8 @@ int omap_request_dma(int dev_id, const char *dev_name, } if (cpu_class_is_omap2()) { - omap2_enable_irq_lch(free_ch); omap_enable_channel_irq(free_ch); - /* Clear the CSR register and IRQ status register */ - p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, free_ch); - p->dma_write(1 << free_ch, IRQSTATUS_L0, 0); + omap2_enable_irq_lch(free_ch); } *dma_ch_out = free_ch; @@ -768,27 +774,19 @@ void omap_free_dma(int lch) return; } - if (cpu_class_is_omap1()) { - /* Disable all DMA interrupts for the channel. */ - p->dma_write(0, CICR, lch); - /* Make sure the DMA transfer is stopped. */ - p->dma_write(0, CCR, lch); - } - - if (cpu_class_is_omap2()) { + /* Disable interrupt for logical channel */ + if (cpu_class_is_omap2()) omap2_disable_irq_lch(lch); - /* Clear the CSR register and IRQ status register */ - p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); - p->dma_write(1 << lch, IRQSTATUS_L0, lch); + /* Disable all DMA interrupts for the channel. */ + omap_disable_channel_irq(lch); - /* Disable all DMA interrupts for the channel. */ - p->dma_write(0, CICR, lch); + /* Make sure the DMA transfer is stopped. */ + p->dma_write(0, CCR, lch); - /* Make sure the DMA transfer is stopped. */ - p->dma_write(0, CCR, lch); + /* Clear registers */ + if (cpu_class_is_omap2()) omap_clear_dma(lch); - } spin_lock_irqsave(&dma_chan_lock, flags); dma_chan[lch].dev_id = -1; @@ -943,8 +941,7 @@ void omap_stop_dma(int lch) u32 l; /* Disable all interrupts on the channel */ - if (cpu_class_is_omap1()) - p->dma_write(0, CICR, lch); + omap_disable_channel_irq(lch); l = p->dma_read(CCR, lch); if (IS_DMA_ERRATA(DMA_ERRATA_i541) && diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index 4814c5b6530..e62f20a5c0a 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -57,44 +57,6 @@ struct omap_camera_sensor_config { int (*power_off)(void * data); }; -struct omap_usb_config { - /* Configure drivers according to the connectors on your board: - * - "A" connector (rectagular) - * ... for host/OHCI use, set "register_host". - * - "B" connector (squarish) or "Mini-B" - * ... for device/gadget use, set "register_dev". - * - "Mini-AB" connector (very similar to Mini-B) - * ... for OTG use as device OR host, initialize "otg" - */ - unsigned register_host:1; - unsigned register_dev:1; - u8 otg; /* port number, 1-based: usb1 == 2 */ - - u8 hmc_mode; - - /* implicitly true if otg: host supports remote wakeup? */ - u8 rwc; - - /* signaling pins used to talk to transceiver on usbN: - * 0 == usbN unused - * 2 == usb0-only, using internal transceiver - * 3 == 3 wire bidirectional - * 4 == 4 wire bidirectional - * 6 == 6 wire unidirectional (or TLL) - */ - u8 pins[3]; - - struct platform_device *udc_device; - struct platform_device *ohci_device; - struct platform_device *otg_device; - - u32 (*usb0_init)(unsigned nwires, unsigned is_device); - u32 (*usb1_init)(unsigned nwires); - u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup); - - int (*ocpi_enable)(void); -}; - struct omap_lcd_config { char panel_name[16]; char ctrl_name[16]; diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index d0ef57c1d71..656b9862279 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -156,7 +156,6 @@ struct dpll_data { u8 min_divider; u16 max_divider; u8 modes; -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) void __iomem *autoidle_reg; void __iomem *idlest_reg; u32 autoidle_mask; @@ -167,7 +166,6 @@ struct dpll_data { u8 auto_recal_bit; u8 recal_en_bit; u8 recal_st_bit; -# endif u8 flags; }; diff --git a/arch/arm/plat-omap/include/plat/dsp.h b/arch/arm/plat-omap/include/plat/dsp.h index 9c604b390f9..5927709b190 100644 --- a/arch/arm/plat-omap/include/plat/dsp.h +++ b/arch/arm/plat-omap/include/plat/dsp.h @@ -18,6 +18,9 @@ struct omap_dsp_platform_data { u32 (*dsp_cm_read)(s16 , u16); u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16); + void (*set_bootaddr)(u32); + void (*set_bootmode)(u8); + phys_addr_t phys_mempool_base; phys_addr_t phys_mempool_size; }; diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index c835b7194ff..a8ecc53b367 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -629,6 +629,8 @@ int omap_hwmod_no_setup_reset(struct omap_hwmod *oh); int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx); +extern void __init omap_hwmod_init(void); + /* * Chip variant-specific hwmod init routines - XXX should be converted * to use initcalls once the initial boot ordering is straightened out diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 762eeb0626c..548a4c8d63d 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -44,6 +44,8 @@ struct usbhs_omap_board_data { struct regulator *regulator[OMAP3_HS_USB_PORTS]; }; +#ifdef CONFIG_ARCH_OMAP2PLUS + struct ehci_hcd_omap_platform_data { enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; int reset_gpio_port[OMAP3_HS_USB_PORTS]; @@ -64,26 +66,6 @@ struct usbhs_omap_platform_data { }; /*-------------------------------------------------------------------------*/ -#define OMAP1_OTG_BASE 0xfffb0400 -#define OMAP1_UDC_BASE 0xfffb4000 -#define OMAP1_OHCI_BASE 0xfffba000 - -#define OMAP2_OHCI_BASE 0x4805e000 -#define OMAP2_UDC_BASE 0x4805e200 -#define OMAP2_OTG_BASE 0x4805e300 - -#ifdef CONFIG_ARCH_OMAP1 - -#define OTG_BASE OMAP1_OTG_BASE -#define UDC_BASE OMAP1_UDC_BASE -#define OMAP_OHCI_BASE OMAP1_OHCI_BASE - -#else - -#define OTG_BASE OMAP2_OTG_BASE -#define UDC_BASE OMAP2_UDC_BASE -#define OMAP_OHCI_BASE OMAP2_OHCI_BASE - struct omap_musb_board_data { u8 interface_type; u8 mode; @@ -107,44 +89,6 @@ extern int omap4430_phy_init(struct device *dev); extern int omap4430_phy_exit(struct device *dev); extern int omap4430_phy_suspend(struct device *dev, int suspend); -/* - * NOTE: Please update omap USB drivers to use ioremap + read/write - */ - -#define OMAP2_L4_IO_OFFSET 0xb2000000 -#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) - -static inline u8 omap_readb(u32 pa) -{ - return __raw_readb(OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline u16 omap_readw(u32 pa) -{ - return __raw_readw(OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline u32 omap_readl(u32 pa) -{ - return __raw_readl(OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline void omap_writeb(u8 v, u32 pa) -{ - __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa)); -} - - -static inline void omap_writew(u16 v, u32 pa) -{ - __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline void omap_writel(u32 v, u32 pa) -{ - __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa)); -} - #endif extern void am35x_musb_reset(void); @@ -153,142 +97,6 @@ extern void am35x_musb_clear_irq(void); extern void am35x_set_mode(u8 musb_mode); extern void ti81xx_musb_phy_power(u8 on); -/* - * FIXME correct answer depends on hmc_mode, - * as does (on omap1) any nonzero value for config->otg port number - */ -#ifdef CONFIG_USB_GADGET_OMAP -#define is_usb0_device(config) 1 -#else -#define is_usb0_device(config) 0 -#endif - -void omap_otg_init(struct omap_usb_config *config); - -#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE) -void omap1_usb_init(struct omap_usb_config *pdata); -#else -static inline void omap1_usb_init(struct omap_usb_config *pdata) -{ -} -#endif - -#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE) -void omap2_usbfs_init(struct omap_usb_config *pdata); -#else -static inline void omap2_usbfs_init(struct omap_usb_config *pdata) -{ -} -#endif - -/*-------------------------------------------------------------------------*/ - -/* - * OTG and transceiver registers, for OMAPs starting with ARM926 - */ -#define OTG_REV (OTG_BASE + 0x00) -#define OTG_SYSCON_1 (OTG_BASE + 0x04) -# define USB2_TRX_MODE(w) (((w)>>24)&0x07) -# define USB1_TRX_MODE(w) (((w)>>20)&0x07) -# define USB0_TRX_MODE(w) (((w)>>16)&0x07) -# define OTG_IDLE_EN (1 << 15) -# define HST_IDLE_EN (1 << 14) -# define DEV_IDLE_EN (1 << 13) -# define OTG_RESET_DONE (1 << 2) -# define OTG_SOFT_RESET (1 << 1) -#define OTG_SYSCON_2 (OTG_BASE + 0x08) -# define OTG_EN (1 << 31) -# define USBX_SYNCHRO (1 << 30) -# define OTG_MST16 (1 << 29) -# define SRP_GPDATA (1 << 28) -# define SRP_GPDVBUS (1 << 27) -# define SRP_GPUVBUS(w) (((w)>>24)&0x07) -# define A_WAIT_VRISE(w) (((w)>>20)&0x07) -# define B_ASE_BRST(w) (((w)>>16)&0x07) -# define SRP_DPW (1 << 14) -# define SRP_DATA (1 << 13) -# define SRP_VBUS (1 << 12) -# define OTG_PADEN (1 << 10) -# define HMC_PADEN (1 << 9) -# define UHOST_EN (1 << 8) -# define HMC_TLLSPEED (1 << 7) -# define HMC_TLLATTACH (1 << 6) -# define OTG_HMC(w) (((w)>>0)&0x3f) -#define OTG_CTRL (OTG_BASE + 0x0c) -# define OTG_USB2_EN (1 << 29) -# define OTG_USB2_DP (1 << 28) -# define OTG_USB2_DM (1 << 27) -# define OTG_USB1_EN (1 << 26) -# define OTG_USB1_DP (1 << 25) -# define OTG_USB1_DM (1 << 24) -# define OTG_USB0_EN (1 << 23) -# define OTG_USB0_DP (1 << 22) -# define OTG_USB0_DM (1 << 21) -# define OTG_ASESSVLD (1 << 20) -# define OTG_BSESSEND (1 << 19) -# define OTG_BSESSVLD (1 << 18) -# define OTG_VBUSVLD (1 << 17) -# define OTG_ID (1 << 16) -# define OTG_DRIVER_SEL (1 << 15) -# define OTG_A_SETB_HNPEN (1 << 12) -# define OTG_A_BUSREQ (1 << 11) -# define OTG_B_HNPEN (1 << 9) -# define OTG_B_BUSREQ (1 << 8) -# define OTG_BUSDROP (1 << 7) -# define OTG_PULLDOWN (1 << 5) -# define OTG_PULLUP (1 << 4) -# define OTG_DRV_VBUS (1 << 3) -# define OTG_PD_VBUS (1 << 2) -# define OTG_PU_VBUS (1 << 1) -# define OTG_PU_ID (1 << 0) -#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ -# define DRIVER_SWITCH (1 << 15) -# define A_VBUS_ERR (1 << 13) -# define A_REQ_TMROUT (1 << 12) -# define A_SRP_DETECT (1 << 11) -# define B_HNP_FAIL (1 << 10) -# define B_SRP_TMROUT (1 << 9) -# define B_SRP_DONE (1 << 8) -# define B_SRP_STARTED (1 << 7) -# define OPRT_CHG (1 << 0) -#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ - // same bits as in IRQ_EN -#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ -# define OTGVPD (1 << 14) -# define OTGVPU (1 << 13) -# define OTGPUID (1 << 12) -# define USB2VDR (1 << 10) -# define USB2PDEN (1 << 9) -# define USB2PUEN (1 << 8) -# define USB1VDR (1 << 6) -# define USB1PDEN (1 << 5) -# define USB1PUEN (1 << 4) -# define USB0VDR (1 << 2) -# define USB0PDEN (1 << 1) -# define USB0PUEN (1 << 0) -#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ -#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ - -/*-------------------------------------------------------------------------*/ - -/* OMAP1 */ -#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) -# define CONF_USB2_UNI_R (1 << 8) -# define CONF_USB1_UNI_R (1 << 7) -# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) -# define CONF_USB0_ISOLATE_R (1 << 3) -# define CONF_USB_PWRDN_DM_R (1 << 2) -# define CONF_USB_PWRDN_DP_R (1 << 1) - -/* OMAP2 */ -# define USB_UNIDIR 0x0 -# define USB_UNIDIR_TLL 0x1 -# define USB_BIDIR 0x2 -# define USB_BIDIR_TLL 0x3 -# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2))) -# define USBT2TLL5PI (1 << 17) -# define USB0PUENACTLOI (1 << 16) -# define USBSTANDBYCTRL (1 << 15) /* AM35x */ /* USB 2.0 PHY Control */ #define CONF2_PHY_GPIOMODE (1 << 23) diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c deleted file mode 100644 index daa0327381b..00000000000 --- a/arch/arm/plat-omap/usb.c +++ /dev/null @@ -1,145 +0,0 @@ - /* - * arch/arm/plat-omap/usb.c -- platform level USB initialization - * - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#undef DEBUG - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <plat/usb.h> -#include <plat/board.h> - -#include <mach/hardware.h> - -#ifdef CONFIG_ARCH_OMAP_OTG - -void __init -omap_otg_init(struct omap_usb_config *config) -{ - u32 syscon; - int alt_pingroup = 0; - - /* NOTE: no bus or clock setup (yet?) */ - - syscon = omap_readl(OTG_SYSCON_1) & 0xffff; - if (!(syscon & OTG_RESET_DONE)) - pr_debug("USB resets not complete?\n"); - - //omap_writew(0, OTG_IRQ_EN); - - /* pin muxing and transceiver pinouts */ - if (config->pins[0] > 2) /* alt pingroup 2 */ - alt_pingroup = 1; - syscon |= config->usb0_init(config->pins[0], is_usb0_device(config)); - syscon |= config->usb1_init(config->pins[1]); - syscon |= config->usb2_init(config->pins[2], alt_pingroup); - pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1)); - omap_writel(syscon, OTG_SYSCON_1); - - syscon = config->hmc_mode; - syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */; -#ifdef CONFIG_USB_OTG - if (config->otg) - syscon |= OTG_EN; -#endif - if (cpu_class_is_omap1()) - pr_debug("USB_TRANSCEIVER_CTRL = %03x\n", - omap_readl(USB_TRANSCEIVER_CTRL)); - pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2)); - omap_writel(syscon, OTG_SYSCON_2); - - printk("USB: hmc %d", config->hmc_mode); - if (!alt_pingroup) - printk(", usb2 alt %d wires", config->pins[2]); - else if (config->pins[0]) - printk(", usb0 %d wires%s", config->pins[0], - is_usb0_device(config) ? " (dev)" : ""); - if (config->pins[1]) - printk(", usb1 %d wires", config->pins[1]); - if (!alt_pingroup && config->pins[2]) - printk(", usb2 %d wires", config->pins[2]); - if (config->otg) - printk(", Mini-AB on usb%d", config->otg - 1); - printk("\n"); - - if (cpu_class_is_omap1()) { - u16 w; - - /* leave USB clocks/controllers off until needed */ - w = omap_readw(ULPD_SOFT_REQ); - w &= ~SOFT_USB_CLK_REQ; - omap_writew(w, ULPD_SOFT_REQ); - - w = omap_readw(ULPD_CLOCK_CTRL); - w &= ~USB_MCLK_EN; - w |= DIS_USB_PVCI_CLK; - omap_writew(w, ULPD_CLOCK_CTRL); - } - syscon = omap_readl(OTG_SYSCON_1); - syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN; - -#ifdef CONFIG_USB_GADGET_OMAP - if (config->otg || config->register_dev) { - struct platform_device *udc_device = config->udc_device; - int status; - - syscon &= ~DEV_IDLE_EN; - udc_device->dev.platform_data = config; - status = platform_device_register(udc_device); - if (status) - pr_debug("can't register UDC device, %d\n", status); - } -#endif - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - if (config->otg || config->register_host) { - struct platform_device *ohci_device = config->ohci_device; - int status; - - syscon &= ~HST_IDLE_EN; - ohci_device->dev.platform_data = config; - status = platform_device_register(ohci_device); - if (status) - pr_debug("can't register OHCI device, %d\n", status); - } -#endif - -#ifdef CONFIG_USB_OTG - if (config->otg) { - struct platform_device *otg_device = config->otg_device; - int status; - - syscon &= ~OTG_IDLE_EN; - otg_device->dev.platform_data = config; - status = platform_device_register(otg_device); - if (status) - pr_debug("can't register OTG device, %d\n", status); - } -#endif - pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1)); - omap_writel(syscon, OTG_SYSCON_1); -} - -#else -void omap_otg_init(struct omap_usb_config *config) {} -#endif diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index a2fae4ea093..ffc84acb7e9 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -491,14 +491,6 @@ config S5P_SLEEP Internal config node to apply common S5P sleep management code. Can be selected by S5P and newer SoCs with similar sleep procedure. -comment "Power Domain" - -config SAMSUNG_PD - bool "Samsung Power Domain" - depends on PM_RUNTIME - help - Say Y here if you want to control Power Domain by Runtime PM. - config DEBUG_S3C_UART depends on PLAT_SAMSUNG int diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 860b2db4db1..4bb58c2dc70 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -60,10 +60,6 @@ obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o obj-$(CONFIG_S5P_PM) += s5p-pm.o s5p-irq-pm.o obj-$(CONFIG_S5P_SLEEP) += s5p-sleep.o -# PD support - -obj-$(CONFIG_SAMSUNG_PD) += pd.o - # PWM support obj-$(CONFIG_HAVE_PWM) += pwm.o diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 61ca2f356c5..5da4b4f38f4 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -131,7 +131,6 @@ extern struct platform_device exynos4_device_ohci; extern struct platform_device exynos4_device_pcm0; extern struct platform_device exynos4_device_pcm1; extern struct platform_device exynos4_device_pcm2; -extern struct platform_device exynos4_device_pd[]; extern struct platform_device exynos4_device_spdif; extern struct platform_device exynos_device_drm; diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index 536002ff2ab..b885322717a 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -43,7 +43,6 @@ struct s3c_fb_pd_win { * @setup_gpio: Setup the external GPIO pins to the right state to transfer * the data from the display system to the connected display * device. - * @default_win: default window layer number to be used for UI layer. * @vidcon0: The base vidcon0 values to control the panel data format. * @vidcon1: The base vidcon1 values to control the panel data output. * @vtiming: Video timing when connected to a RGB type panel. diff --git a/arch/arm/plat-samsung/include/plat/pd.h b/arch/arm/plat-samsung/include/plat/pd.h deleted file mode 100644 index abb4bc32716..00000000000 --- a/arch/arm/plat-samsung/include/plat/pd.h +++ /dev/null @@ -1,30 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/pd.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_SAMSUNG_PD_H -#define __ASM_PLAT_SAMSUNG_PD_H __FILE__ - -struct samsung_pd_info { - int (*enable)(struct device *dev); - int (*disable)(struct device *dev); - void __iomem *base; -}; - -enum exynos4_pd_block { - PD_MFC, - PD_G3D, - PD_LCD0, - PD_LCD1, - PD_TV, - PD_CAM, - PD_GPS -}; - -#endif /* __ASM_PLAT_SAMSUNG_PD_H */ diff --git a/arch/arm/plat-samsung/pd.c b/arch/arm/plat-samsung/pd.c deleted file mode 100644 index 312b510d86b..00000000000 --- a/arch/arm/plat-samsung/pd.c +++ /dev/null @@ -1,95 +0,0 @@ -/* linux/arch/arm/plat-samsung/pd.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung Power domain support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/export.h> -#include <linux/platform_device.h> -#include <linux/err.h> -#include <linux/pm_runtime.h> - -#include <plat/pd.h> - -static int samsung_pd_probe(struct platform_device *pdev) -{ - struct samsung_pd_info *pdata = pdev->dev.platform_data; - struct device *dev = &pdev->dev; - - if (!pdata) { - dev_err(dev, "no device data specified\n"); - return -ENOENT; - } - - pm_runtime_set_active(dev); - pm_runtime_enable(dev); - - dev_info(dev, "power domain registered\n"); - return 0; -} - -static int __devexit samsung_pd_remove(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - - pm_runtime_disable(dev); - return 0; -} - -static int samsung_pd_runtime_suspend(struct device *dev) -{ - struct samsung_pd_info *pdata = dev->platform_data; - int ret = 0; - - if (pdata->disable) - ret = pdata->disable(dev); - - dev_dbg(dev, "suspended\n"); - return ret; -} - -static int samsung_pd_runtime_resume(struct device *dev) -{ - struct samsung_pd_info *pdata = dev->platform_data; - int ret = 0; - - if (pdata->enable) - ret = pdata->enable(dev); - - dev_dbg(dev, "resumed\n"); - return ret; -} - -static const struct dev_pm_ops samsung_pd_pm_ops = { - .runtime_suspend = samsung_pd_runtime_suspend, - .runtime_resume = samsung_pd_runtime_resume, -}; - -static struct platform_driver samsung_pd_driver = { - .driver = { - .name = "samsung-pd", - .owner = THIS_MODULE, - .pm = &samsung_pd_pm_ops, - }, - .probe = samsung_pd_probe, - .remove = __devexit_p(samsung_pd_remove), -}; - -static int __init samsung_pd_init(void) -{ - int ret; - - ret = platform_driver_register(&samsung_pd_driver); - if (ret) - printk(KERN_ERR "%s: failed to add PD driver\n", __func__); - - return ret; -} -arch_initcall(samsung_pd_init); diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c index c559d8438c7..d3583050fb0 100644 --- a/arch/arm/plat-samsung/pwm.c +++ b/arch/arm/plat-samsung/pwm.c @@ -36,7 +36,6 @@ struct pwm_device { unsigned int duty_ns; unsigned char tcon_base; - unsigned char running; unsigned char use_count; unsigned char pwm_id; }; @@ -116,7 +115,6 @@ int pwm_enable(struct pwm_device *pwm) local_irq_restore(flags); - pwm->running = 1; return 0; } @@ -134,8 +132,6 @@ void pwm_disable(struct pwm_device *pwm) __raw_writel(tcon, S3C2410_TCON); local_irq_restore(flags); - - pwm->running = 0; } EXPORT_SYMBOL(pwm_disable); |