diff options
Diffstat (limited to 'arch/xtensa')
64 files changed, 2584 insertions, 390 deletions
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 5aab1acabf1..0a1b95f81a3 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -1,28 +1,29 @@ -config FRAME_POINTER - def_bool n - config ZONE_DMA def_bool y config XTENSA def_bool y + select ARCH_WANT_FRAME_POINTERS select HAVE_IDE select GENERIC_ATOMIC64 select HAVE_GENERIC_HARDIRQS + select VIRT_TO_BUS select GENERIC_IRQ_SHOW select GENERIC_CPU_DEVICES select MODULES_USE_ELF_RELA select GENERIC_PCI_IOMAP + select ARCH_WANT_IPC_PARSE_VERSION select ARCH_WANT_OPTIONAL_GPIOLIB select CLONE_BACKWARDS select IRQ_DOMAIN + select HAVE_OPROFILE help Xtensa processors are 32-bit RISC machines designed by Tensilica primarily for embedded systems. These processors are both configurable and extensible. The Linux port to the Xtensa architecture supports all processor configurations and extensions, with reasonable minimum requirements. The Xtensa Linux project has - a home page at <http://xtensa.sourceforge.net/>. + a home page at <http://www.linux-xtensa.org/>. config RWSEM_XCHGADD_ALGORITHM def_bool y @@ -30,9 +31,6 @@ config RWSEM_XCHGADD_ALGORITHM config GENERIC_HWEIGHT def_bool y -config GENERIC_GPIO - def_bool y - config ARCH_HAS_ILOG2_U32 def_bool n @@ -49,6 +47,15 @@ config HZ source "init/Kconfig" source "kernel/Kconfig.freezer" +config LOCKDEP_SUPPORT + def_bool y + +config STACKTRACE_SUPPORT + def_bool y + +config TRACE_IRQFLAGS_SUPPORT + def_bool y + config MMU def_bool n @@ -71,6 +78,12 @@ config XTENSA_VARIANT_DC232B help This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE). +config XTENSA_VARIANT_DC233C + bool "dc233c - Diamond 233L Standard Core Rev.C (LE)" + select MMU + help + This variant refers to Tensilica's Diamond 233L Standard core Rev.C (LE). + config XTENSA_VARIANT_S6000 bool "s6000 - Stretch software configurable processor" select VARIANT_IRQ_SWITCH @@ -94,6 +107,35 @@ config MATH_EMULATION help Can we use information of configuration file? +config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX + bool "Initialize Xtensa MMU inside the Linux kernel code" + default y + help + Earlier version initialized the MMU in the exception vector + before jumping to _startup in head.S and had an advantage that + it was possible to place a software breakpoint at 'reset' and + then enter your normal kernel breakpoints once the MMU was mapped + to the kernel mappings (0XC0000000). + + This unfortunately doesn't work for U-Boot and likley also wont + work for using KEXEC to have a hot kernel ready for doing a + KDUMP. + + So now the MMU is initialized in head.S but it's necessary to + use hardware breakpoints (gdb 'hbreak' cmd) to break at _startup. + xt-gdb can't place a Software Breakpoint in the 0XD region prior + to mapping the MMU and after mapping even if the area of low memory + was mapped gdb wouldn't remove the breakpoint on hitting it as the + PC wouldn't match. Since Hardware Breakpoints are recommended for + Linux configurations it seems reasonable to just assume they exist + and leave this older mechanism for unfortunate souls that choose + not to follow Tensilica's recommendation. + + Selecting this will cause U-Boot to set the KERNEL Load and Entry + address at 0x00003000 instead of the mapped std of 0xD0003000. + + If in doubt, say Y. + endmenu config XTENSA_CALIBRATE_CCOUNT @@ -132,6 +174,7 @@ choice config XTENSA_PLATFORM_ISS bool "ISS" + depends on TTY select XTENSA_CALIBRATE_CCOUNT select SERIAL_CONSOLE select XTENSA_ISS_NETWORK @@ -196,6 +239,42 @@ config BUILTIN_DTB string "DTB to build into the kernel image" depends on OF +config BLK_DEV_SIMDISK + tristate "Host file-based simulated block device support" + default n + depends on XTENSA_PLATFORM_ISS + help + Create block devices that map to files in the host file system. + Device binding to host file may be changed at runtime via proc + interface provided the device is not in use. + +config BLK_DEV_SIMDISK_COUNT + int "Number of host file-based simulated block devices" + range 1 10 + depends on BLK_DEV_SIMDISK + default 2 + help + This is the default minimal number of created block devices. + Kernel/module parameter 'simdisk_count' may be used to change this + value at runtime. More file names (but no more than 10) may be + specified as parameters, simdisk_count grows accordingly. + +config SIMDISK0_FILENAME + string "Host filename for the first simulated device" + depends on BLK_DEV_SIMDISK = y + default "" + help + Attach a first simdisk to a host file. Conventionally, this file + contains a root file system. + +config SIMDISK1_FILENAME + string "Host filename for the second simulated device" + depends on BLK_DEV_SIMDISK = y && BLK_DEV_SIMDISK_COUNT != 1 + default "" + help + Another simulated disk in a host file for a buildroot-independent + storage. + source "mm/Kconfig" source "drivers/pcmcia/Kconfig" @@ -206,21 +285,6 @@ endmenu menu "Executable file formats" -# only elf supported -config KCORE_ELF - def_bool y - depends on PROC_FS - help - If you enabled support for /proc file system then the file - /proc/kcore will contain the kernel core image in ELF format. This - can be used in gdb: - - $ cd /usr/src/linux ; gdb vmlinux /proc/kcore - - This is especially useful if you have compiled the kernel with the - "-g" option to preserve debugging information. It is mainly used - for examining kernel data structures on the live kernel. - source "fs/Kconfig.binfmt" endmenu diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile index 0aa72702f17..136224b74d4 100644 --- a/arch/xtensa/Makefile +++ b/arch/xtensa/Makefile @@ -15,6 +15,7 @@ variant-$(CONFIG_XTENSA_VARIANT_FSF) := fsf variant-$(CONFIG_XTENSA_VARIANT_DC232B) := dc232b +variant-$(CONFIG_XTENSA_VARIANT_DC233C) := dc233c variant-$(CONFIG_XTENSA_VARIANT_S6000) := s6000 variant-$(CONFIG_XTENSA_VARIANT_LINUX_CUSTOM) := custom @@ -86,9 +87,10 @@ core-y += arch/xtensa/kernel/ arch/xtensa/mm/ core-y += $(buildvar) $(buildplf) libs-y += arch/xtensa/lib/ $(LIBGCC) +drivers-$(CONFIG_OPROFILE) += arch/xtensa/oprofile/ ifneq ($(CONFIG_BUILTIN_DTB),"") -core-$(CONFIG_OF) += arch/xtensa/boot/ +core-$(CONFIG_OF) += arch/xtensa/boot/dts/ endif boot := arch/xtensa/boot @@ -101,7 +103,7 @@ zImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $@ %.dtb: - $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ define archhelp @echo '* zImage - Compressed kernel image (arch/xtensa/boot/images/zImage.*)' diff --git a/arch/xtensa/boot/Makefile b/arch/xtensa/boot/Makefile index 818647e815d..64ffc4b53df 100644 --- a/arch/xtensa/boot/Makefile +++ b/arch/xtensa/boot/Makefile @@ -25,18 +25,6 @@ bootdir-$(CONFIG_XTENSA_PLATFORM_ISS) += boot-elf bootdir-$(CONFIG_XTENSA_PLATFORM_XT2000) += boot-redboot boot-elf boot-uboot bootdir-$(CONFIG_XTENSA_PLATFORM_XTFPGA) += boot-redboot boot-elf boot-uboot - -BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_BUILTIN_DTB)).dtb.o -ifneq ($(CONFIG_BUILTIN_DTB),"") -obj-$(CONFIG_OF) += $(BUILTIN_DTB) -endif - -# Rule to build device tree blobs -$(obj)/%.dtb: $(src)/dts/%.dts FORCE - $(call if_changed_dep,dtc) - -clean-files := *.dtb.S - zImage Image: $(bootdir-y) $(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \ diff --git a/arch/xtensa/boot/boot-elf/Makefile b/arch/xtensa/boot/boot-elf/Makefile index 1fe01b78c12..89db089f5a1 100644 --- a/arch/xtensa/boot/boot-elf/Makefile +++ b/arch/xtensa/boot/boot-elf/Makefile @@ -12,6 +12,7 @@ endif export OBJCOPY_ARGS export CPPFLAGS_boot.lds += -P -C +export KBUILD_AFLAGS += -mtext-section-literals boot-y := bootstrap.o diff --git a/arch/xtensa/boot/boot-elf/boot.lds.S b/arch/xtensa/boot/boot-elf/boot.lds.S index 7b646e0a648..932b58ef33d 100644 --- a/arch/xtensa/boot/boot-elf/boot.lds.S +++ b/arch/xtensa/boot/boot-elf/boot.lds.S @@ -1,41 +1,29 @@ -#include <variant/core.h> +/* + * linux/arch/xtensa/boot/boot-elf/boot.lds.S + * + * Copyright (C) 2008 - 2013 by Tensilica Inc. + * + * Chris Zankel <chris@zankel.net> + * Marc Gauthier <marc@tensilica.com + * Pete Delaney <piet@tensilica.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <asm/vectors.h> OUTPUT_ARCH(xtensa) ENTRY(_ResetVector) SECTIONS { - .start 0xD0000000 : { *(.start) } - - .text 0xD0000000: - { - __reloc_start = . ; - _text_start = . ; - *(.literal .text.literal .text) - _text_end = . ; - } - - .rodata ALIGN(0x04): - { - *(.rodata) - *(.rodata1) - } - - .data ALIGN(0x04): + .ResetVector.text XCHAL_RESET_VECTOR_VADDR : { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.got.plt) - *(.got) - *(.dynamic) + *(.ResetVector.text) } - __reloc_end = . ; - - . = ALIGN(0x10); - __image_load = . ; - .image 0xd0001000: + .image KERNELOFFSET: AT (LOAD_MEMORY_ADDRESS) { _image_start = .; *(image) @@ -43,7 +31,6 @@ SECTIONS _image_end = . ; } - .bss ((LOADADDR(.image) + SIZEOF(.image) + 3) & ~ 3): { __bss_start = .; @@ -53,14 +40,15 @@ SECTIONS *(.bss) __bss_end = .; } - _end = .; - _param_start = .; - .ResetVector.text XCHAL_RESET_VECTOR_VADDR : + /* + * This is a remapped copy of the Reset Vector Code. + * It keeps gdb in sync with the PC after switching + * to the temporary mapping used while setting up + * the V2 MMU mappings for Linux. + */ + .ResetVector.remapped_text 0x46000000 (INFO): { - *(.ResetVector.text) + *(.ResetVector.remapped_text) } - - - PROVIDE (end = .); } diff --git a/arch/xtensa/boot/boot-elf/bootstrap.S b/arch/xtensa/boot/boot-elf/bootstrap.S index 464298bc348..1388a499753 100644 --- a/arch/xtensa/boot/boot-elf/bootstrap.S +++ b/arch/xtensa/boot/boot-elf/bootstrap.S @@ -1,18 +1,77 @@ +/* + * arch/xtensa/boot/boot-elf/bootstrap.S + * + * Low-level exception handling + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004 - 2013 by Tensilica Inc. + * + * Chris Zankel <chris@zankel.net> + * Marc Gauthier <marc@tensilica.com> + * Piet Delaney <piet@tensilica.com> + */ #include <asm/bootparam.h> +#include <asm/processor.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/cacheasm.h> +#include <asm/initialize_mmu.h> +#include <linux/linkage.h> - -/* ResetVector - */ - .section .ResetVector.text, "ax" + .section .ResetVector.text, "ax" .global _ResetVector + .global reset + _ResetVector: - _j reset + _j _SetupMMU + + .begin no-absolute-literals + .literal_position + .align 4 RomInitAddr: - .word 0xd0001000 +#if defined(CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) && \ + XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY + .word 0x00003000 +#else + .word 0xd0003000 +#endif RomBootParam: .word _bootparam +_bootparam: + .short BP_TAG_FIRST + .short 4 + .long BP_VERSION + .short BP_TAG_LAST + .short 0 + .long 0 + + .align 4 +_SetupMMU: + movi a0, 0 + wsr a0, windowbase + rsync + movi a0, 1 + wsr a0, windowstart + rsync + movi a0, 0x1F + wsr a0, ps + rsync + + Offset = _SetupMMU - _ResetVector + +#ifndef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX + initialize_mmu +#endif + + .end no-absolute-literals + + rsil a0, XCHAL_DEBUGLEVEL-1 + rsync reset: l32r a0, RomInitAddr l32r a2, RomBootParam @@ -21,13 +80,25 @@ reset: jx a0 .align 4 - .section .bootstrap.data, "aw" - .globl _bootparam -_bootparam: - .short BP_TAG_FIRST - .short 4 - .long BP_VERSION - .short BP_TAG_LAST - .short 0 - .long 0 + .section .ResetVector.remapped_text, "x" + .global _RemappedResetVector + + /* Do org before literals */ + .org 0 + +_RemappedResetVector: + .begin no-absolute-literals + .literal_position + + _j _RemappedSetupMMU + + /* Position Remapped code at the same location as the original code */ + . = _RemappedResetVector + Offset + +_RemappedSetupMMU: +#ifndef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX + initialize_mmu +#endif + + .end no-absolute-literals diff --git a/arch/xtensa/boot/boot-redboot/boot.ld b/arch/xtensa/boot/boot-redboot/boot.ld index 5bbcaf9e830..b0b9e95b58b 100644 --- a/arch/xtensa/boot/boot-redboot/boot.ld +++ b/arch/xtensa/boot/boot-redboot/boot.ld @@ -33,7 +33,7 @@ SECTIONS . = ALIGN(0x10); __image_load = . ; - .image 0xd0001000: AT(__image_load) + .image 0xd0003000: AT(__image_load) { _image_start = .; *(image) diff --git a/arch/xtensa/boot/boot-uboot/Makefile b/arch/xtensa/boot/boot-uboot/Makefile index bfbf8af582f..545759819ef 100644 --- a/arch/xtensa/boot/boot-uboot/Makefile +++ b/arch/xtensa/boot/boot-uboot/Makefile @@ -4,7 +4,11 @@ # for more details. # -UIMAGE_LOADADDR = 0xd0001000 +ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX +UIMAGE_LOADADDR = 0x00003000 +else +UIMAGE_LOADADDR = 0xd0003000 +endif UIMAGE_COMPRESSION = gzip $(obj)/../uImage: vmlinux.bin.gz FORCE diff --git a/arch/xtensa/boot/dts/Makefile b/arch/xtensa/boot/dts/Makefile new file mode 100644 index 00000000000..5f711bba830 --- /dev/null +++ b/arch/xtensa/boot/dts/Makefile @@ -0,0 +1,15 @@ +# +# arch/xtensa/boot/dts/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# + +BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_BUILTIN_DTB)).dtb.o +ifneq ($(CONFIG_BUILTIN_DTB),"") +obj-$(CONFIG_OF) += $(BUILTIN_DTB) +endif + +clean-files := *.dtb.S diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig index ddab37b2474..77c52f80187 100644 --- a/arch/xtensa/configs/iss_defconfig +++ b/arch/xtensa/configs/iss_defconfig @@ -10,7 +10,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_NO_IOPORT=y diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig index eaf1b8fc655..4799c6a526b 100644 --- a/arch/xtensa/configs/s6105_defconfig +++ b/arch/xtensa/configs/s6105_defconfig @@ -10,7 +10,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_NO_IOPORT=y diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild index 095f0a2244f..1b982641ec3 100644 --- a/arch/xtensa/include/asm/Kbuild +++ b/arch/xtensa/include/asm/Kbuild @@ -15,6 +15,7 @@ generic-y += irq_regs.h generic-y += kdebug.h generic-y += kmap_types.h generic-y += kvm_para.h +generic-y += linkage.h generic-y += local.h generic-y += local64.h generic-y += percpu.h diff --git a/arch/xtensa/include/asm/atomic.h b/arch/xtensa/include/asm/atomic.h index c3f289174c1..e7fb447bce8 100644 --- a/arch/xtensa/include/asm/atomic.h +++ b/arch/xtensa/include/asm/atomic.h @@ -7,7 +7,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2001 - 2005 Tensilica Inc. + * Copyright (C) 2001 - 2008 Tensilica Inc. */ #ifndef _XTENSA_ATOMIC_H @@ -24,11 +24,11 @@ /* * This Xtensa implementation assumes that the right mechanism - * for exclusion is for locking interrupts to level 1. + * for exclusion is for locking interrupts to level EXCM_LEVEL. * * Locking interrupts looks like this: * - * rsil a15, 1 + * rsil a15, LOCKLEVEL * <code> * wsr a15, PS * rsync diff --git a/arch/xtensa/include/asm/checksum.h b/arch/xtensa/include/asm/checksum.h index aed7ad68ca4..0593de689b5 100644 --- a/arch/xtensa/include/asm/checksum.h +++ b/arch/xtensa/include/asm/checksum.h @@ -12,6 +12,7 @@ #define _XTENSA_CHECKSUM_H #include <linux/in6.h> +#include <asm/uaccess.h> #include <variant/core.h> /* diff --git a/arch/xtensa/include/asm/elf.h b/arch/xtensa/include/asm/elf.h index 264d5fa450d..eacb25a4171 100644 --- a/arch/xtensa/include/asm/elf.h +++ b/arch/xtensa/include/asm/elf.h @@ -84,7 +84,8 @@ typedef struct { elf_greg_t sar; elf_greg_t windowstart; elf_greg_t windowbase; - elf_greg_t reserved[8+48]; + elf_greg_t threadptr; + elf_greg_t reserved[7+48]; elf_greg_t a[64]; } xtensa_gregset_t; diff --git a/arch/xtensa/include/asm/ftrace.h b/arch/xtensa/include/asm/ftrace.h index 40a8c178f10..36dc7a68439 100644 --- a/arch/xtensa/include/asm/ftrace.h +++ b/arch/xtensa/include/asm/ftrace.h @@ -1 +1,33 @@ -/* empty */ +/* + * arch/xtensa/include/asm/ftrace.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2013 Tensilica Inc. + */ +#ifndef _XTENSA_FTRACE_H +#define _XTENSA_FTRACE_H + +#include <asm/processor.h> + +#define HAVE_ARCH_CALLER_ADDR +#define CALLER_ADDR0 ({ unsigned long a0, a1; \ + __asm__ __volatile__ ( \ + "mov %0, a0\n" \ + "mov %1, a1\n" \ + : "=r"(a0), "=r"(a1) : : ); \ + MAKE_PC_FROM_RA(a0, a1); }) +#ifdef CONFIG_FRAME_POINTER +extern unsigned long return_address(unsigned level); +#define CALLER_ADDR1 return_address(1) +#define CALLER_ADDR2 return_address(2) +#define CALLER_ADDR3 return_address(3) +#else +#define CALLER_ADDR1 (0) +#define CALLER_ADDR2 (0) +#define CALLER_ADDR3 (0) +#endif + +#endif /* _XTENSA_FTRACE_H */ diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h index e1f8ba4061e..722553f17db 100644 --- a/arch/xtensa/include/asm/initialize_mmu.h +++ b/arch/xtensa/include/asm/initialize_mmu.h @@ -23,6 +23,9 @@ #ifndef _XTENSA_INITIALIZE_MMU_H #define _XTENSA_INITIALIZE_MMU_H +#include <asm/pgtable.h> +#include <asm/vectors.h> + #ifdef __ASSEMBLY__ #define XTENSA_HWVERSION_RC_2009_0 230000 @@ -48,6 +51,110 @@ * (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RC_2009_0) */ +#if defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY +/* + * Have MMU v3 + */ + +#if !XCHAL_HAVE_VECBASE +# error "MMU v3 requires reloc vectors" +#endif + + movi a1, 0 + _call0 1f + _j 2f + + .align 4 +1: movi a2, 0x10000000 + movi a3, 0x18000000 + add a2, a2, a0 +9: bgeu a2, a3, 9b /* PC is out of the expected range */ + + /* Step 1: invalidate mapping at 0x40000000..0x5FFFFFFF. */ + + movi a2, 0x40000006 + idtlb a2 + iitlb a2 + isync + + /* Step 2: map 0x40000000..0x47FFFFFF to paddr containing this code + * and jump to the new mapping. + */ +#define CA_BYPASS (_PAGE_CA_BYPASS | _PAGE_HW_WRITE | _PAGE_HW_EXEC) +#define CA_WRITEBACK (_PAGE_CA_WB | _PAGE_HW_WRITE | _PAGE_HW_EXEC) + + srli a3, a0, 27 + slli a3, a3, 27 + addi a3, a3, CA_BYPASS + addi a7, a2, -1 + wdtlb a3, a7 + witlb a3, a7 + isync + + slli a4, a0, 5 + srli a4, a4, 5 + addi a5, a2, -6 + add a4, a4, a5 + jx a4 + + /* Step 3: unmap everything other than current area. + * Start at 0x60000000, wrap around, and end with 0x20000000 + */ +2: movi a4, 0x20000000 + add a5, a2, a4 +3: idtlb a5 + iitlb a5 + add a5, a5, a4 + bne a5, a2, 3b + + /* Step 4: Setup MMU with the old V2 mappings. */ + movi a6, 0x01000000 + wsr a6, ITLBCFG + wsr a6, DTLBCFG + isync + + movi a5, 0xd0000005 + movi a4, CA_WRITEBACK + wdtlb a4, a5 + witlb a4, a5 + + movi a5, 0xd8000005 + movi a4, CA_BYPASS + wdtlb a4, a5 + witlb a4, a5 + + movi a5, 0xe0000006 + movi a4, 0xf0000000 + CA_WRITEBACK + wdtlb a4, a5 + witlb a4, a5 + + movi a5, 0xf0000006 + movi a4, 0xf0000000 + CA_BYPASS + wdtlb a4, a5 + witlb a4, a5 + + isync + + /* Jump to self, using MMU v2 mappings. */ + movi a4, 1f + jx a4 + +1: + movi a2, VECBASE_RESET_VADDR + wsr a2, vecbase + + /* Step 5: remove temporary mapping. */ + idtlb a7 + iitlb a7 + isync + + movi a0, 0 + wsr a0, ptevaddr + rsync + +#endif /* defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && + XCHAL_HAVE_SPANNING_WAY */ + .endm #endif /*__ASSEMBLY__*/ diff --git a/arch/xtensa/include/asm/irqflags.h b/arch/xtensa/include/asm/irqflags.h index f865b1c1eae..ea36674c6ec 100644 --- a/arch/xtensa/include/asm/irqflags.h +++ b/arch/xtensa/include/asm/irqflags.h @@ -47,7 +47,10 @@ static inline void arch_local_irq_restore(unsigned long flags) static inline bool arch_irqs_disabled_flags(unsigned long flags) { - return (flags & 0xf) != 0; +#if XCHAL_EXCM_LEVEL < LOCKLEVEL || (1 << PS_EXCM_BIT) < LOCKLEVEL +#error "XCHAL_EXCM_LEVEL and 1<<PS_EXCM_BIT must be no less than LOCKLEVEL" +#endif + return (flags & (PS_INTLEVEL_MASK | (1 << PS_EXCM_BIT))) >= LOCKLEVEL; } static inline bool arch_irqs_disabled(void) diff --git a/arch/xtensa/include/asm/linkage.h b/arch/xtensa/include/asm/linkage.h deleted file mode 100644 index bf2128a99d7..00000000000 --- a/arch/xtensa/include/asm/linkage.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/linkage.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_LINKAGE_H -#define _XTENSA_LINKAGE_H - -/* Nothing to do here ... */ - -#endif /* _XTENSA_LINKAGE_H */ diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h index c90ea5bfa1b..d7546c94da5 100644 --- a/arch/xtensa/include/asm/pgtable.h +++ b/arch/xtensa/include/asm/pgtable.h @@ -410,6 +410,10 @@ typedef pte_t *pte_addr_t; #define __HAVE_ARCH_PTEP_SET_WRPROTECT #define __HAVE_ARCH_PTEP_MKDIRTY #define __HAVE_ARCH_PTE_SAME +/* We provide our own get_unmapped_area to cope with + * SHM area cache aliasing for userland. + */ +#define HAVE_ARCH_UNMAPPED_AREA #include <asm-generic/pgtable.h> diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h index e5fb6b0abdf..7e409a5b0ec 100644 --- a/arch/xtensa/include/asm/processor.h +++ b/arch/xtensa/include/asm/processor.h @@ -5,7 +5,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2001 - 2005 Tensilica Inc. + * Copyright (C) 2001 - 2008 Tensilica Inc. */ #ifndef _XTENSA_PROCESSOR_H @@ -68,7 +68,7 @@ /* LOCKLEVEL defines the interrupt level that masks all * general-purpose interrupts. */ -#define LOCKLEVEL 1 +#define LOCKLEVEL XCHAL_EXCM_LEVEL /* WSBITS and WBBITS are the width of the WINDOWSTART and WINDOWBASE * registers diff --git a/arch/xtensa/include/asm/ptrace.h b/arch/xtensa/include/asm/ptrace.h index 682b1deac1f..81f31bc9dde 100644 --- a/arch/xtensa/include/asm/ptrace.h +++ b/arch/xtensa/include/asm/ptrace.h @@ -38,6 +38,7 @@ struct pt_regs { unsigned long syscall; /* 56 */ unsigned long icountlevel; /* 60 */ unsigned long scompare1; /* 64 */ + unsigned long threadptr; /* 68 */ /* Additional configurable registers that are used by the compiler. */ xtregs_opt_t xtregs_opt; @@ -48,7 +49,7 @@ struct pt_regs { /* current register frame. * Note: The ESF for kernel exceptions ends after 16 registers! */ - unsigned long areg[16]; /* 128 (64) */ + unsigned long areg[16]; }; #include <variant/core.h> diff --git a/arch/xtensa/include/asm/regs.h b/arch/xtensa/include/asm/regs.h index 76096a4e5b8..b24de671702 100644 --- a/arch/xtensa/include/asm/regs.h +++ b/arch/xtensa/include/asm/regs.h @@ -88,6 +88,7 @@ #define PS_UM_BIT 5 #define PS_EXCM_BIT 4 #define PS_INTLEVEL_SHIFT 0 +#define PS_INTLEVEL_WIDTH 4 #define PS_INTLEVEL_MASK 0x0000000F /* DBREAKCn register fields. */ diff --git a/arch/xtensa/include/asm/signal.h b/arch/xtensa/include/asm/signal.h index 6f586bd90e1..de169b4eaee 100644 --- a/arch/xtensa/include/asm/signal.h +++ b/arch/xtensa/include/asm/signal.h @@ -15,16 +15,7 @@ #include <uapi/asm/signal.h> #ifndef __ASSEMBLY__ -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; +#define __ARCH_HAS_SA_RESTORER #include <asm/sigcontext.h> diff --git a/arch/xtensa/include/asm/stacktrace.h b/arch/xtensa/include/asm/stacktrace.h new file mode 100644 index 00000000000..6a05fcb0a20 --- /dev/null +++ b/arch/xtensa/include/asm/stacktrace.h @@ -0,0 +1,36 @@ +/* + * arch/xtensa/include/asm/stacktrace.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2013 Tensilica Inc. + */ +#ifndef _XTENSA_STACKTRACE_H +#define _XTENSA_STACKTRACE_H + +#include <linux/sched.h> + +struct stackframe { + unsigned long pc; + unsigned long sp; +}; + +static __always_inline unsigned long *stack_pointer(struct task_struct *task) +{ + unsigned long *sp; + + if (!task || task == current) + __asm__ __volatile__ ("mov %0, a1\n" : "=a"(sp)); + else + sp = (unsigned long *)task->thread.sp; + + return sp; +} + +void walk_stackframe(unsigned long *sp, + int (*fn)(struct stackframe *frame, void *data), + void *data); + +#endif /* _XTENSA_STACKTRACE_H */ diff --git a/arch/xtensa/include/asm/string.h b/arch/xtensa/include/asm/string.h index 405a8c49ff2..8d5d9dfadb0 100644 --- a/arch/xtensa/include/asm/string.h +++ b/arch/xtensa/include/asm/string.h @@ -74,7 +74,7 @@ static inline int strcmp(const char *__cs, const char *__ct) "beqz %2, 2f\n\t" "beq %2, %3, 1b\n" "2:\n\t" - "sub %2, %3, %2" + "sub %2, %2, %3" : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&r" (__dummy) : "0" (__cs), "1" (__ct)); @@ -99,7 +99,7 @@ static inline int strncmp(const char *__cs, const char *__ct, size_t __n) "beqz %3, 2f\n\t" "beq %2, %3, 1b\n" "2:\n\t" - "sub %2, %3, %2" + "sub %2, %2, %3" : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&r" (__dummy) : "0" (__cs), "1" (__ct), "r" (__cs+__n)); diff --git a/arch/xtensa/include/asm/syscall.h b/arch/xtensa/include/asm/syscall.h index 8d5e47fad09..3673ff1f1bc 100644 --- a/arch/xtensa/include/asm/syscall.h +++ b/arch/xtensa/include/asm/syscall.h @@ -9,15 +9,9 @@ */ struct pt_regs; -struct sigaction; asmlinkage long xtensa_ptrace(long, long, long, long); asmlinkage long xtensa_sigreturn(struct pt_regs*); asmlinkage long xtensa_rt_sigreturn(struct pt_regs*); -asmlinkage long xtensa_sigaltstack(struct pt_regs *regs); -asmlinkage long sys_rt_sigaction(int, - const struct sigaction __user *, - struct sigaction __user *, - size_t); asmlinkage long xtensa_shmat(int, char __user *, int); asmlinkage long xtensa_fadvise64_64(int, int, unsigned long long, unsigned long long); @@ -31,4 +25,3 @@ asmlinkage long sys_ppoll(struct pollfd __user *ufds, unsigned int nfds, struct timespec __user *tsp, const sigset_t __user *sigmask, size_t sigsetsize); -asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize); diff --git a/arch/xtensa/include/asm/timex.h b/arch/xtensa/include/asm/timex.h index 175b3d5e1b0..3d35e5d0367 100644 --- a/arch/xtensa/include/asm/timex.h +++ b/arch/xtensa/include/asm/timex.h @@ -5,7 +5,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2001 - 2005 Tensilica Inc. + * Copyright (C) 2001 - 2008 Tensilica Inc. */ #ifndef _XTENSA_TIMEX_H @@ -19,13 +19,16 @@ #define _INTLEVEL(x) XCHAL_INT ## x ## _LEVEL #define INTLEVEL(x) _INTLEVEL(x) -#if INTLEVEL(XCHAL_TIMER0_INTERRUPT) == 1 +#if XCHAL_NUM_TIMERS > 0 && \ + INTLEVEL(XCHAL_TIMER0_INTERRUPT) <= XCHAL_EXCM_LEVEL # define LINUX_TIMER 0 # define LINUX_TIMER_INT XCHAL_TIMER0_INTERRUPT -#elif INTLEVEL(XCHAL_TIMER1_INTERRUPT) == 1 +#elif XCHAL_NUM_TIMERS > 1 && \ + INTLEVEL(XCHAL_TIMER1_INTERRUPT) <= XCHAL_EXCM_LEVEL # define LINUX_TIMER 1 # define LINUX_TIMER_INT XCHAL_TIMER1_INTERRUPT -#elif INTLEVEL(XCHAL_TIMER2_INTERRUPT) == 1 +#elif XCHAL_NUM_TIMERS > 2 && \ + INTLEVEL(XCHAL_TIMER2_INTERRUPT) <= XCHAL_EXCM_LEVEL # define LINUX_TIMER 2 # define LINUX_TIMER_INT XCHAL_TIMER2_INTERRUPT #else diff --git a/arch/xtensa/include/asm/traps.h b/arch/xtensa/include/asm/traps.h index 54f70440185..917488a0ab0 100644 --- a/arch/xtensa/include/asm/traps.h +++ b/arch/xtensa/include/asm/traps.h @@ -20,4 +20,27 @@ extern void * __init trap_set_handler(int cause, void *handler); extern void do_unhandled(struct pt_regs *regs, unsigned long exccause); +static inline void spill_registers(void) +{ + + __asm__ __volatile__ ( + "movi a14, "__stringify((1 << PS_EXCM_BIT) | LOCKLEVEL)"\n\t" + "mov a12, a0\n\t" + "rsr a13, sar\n\t" + "xsr a14, ps\n\t" + "movi a0, _spill_registers\n\t" + "rsync\n\t" + "callx0 a0\n\t" + "mov a0, a12\n\t" + "wsr a13, sar\n\t" + "wsr a14, ps\n\t" + : : +#if defined(CONFIG_FRAME_POINTER) + : "a2", "a3", "a4", "a11", "a12", "a13", "a14", "a15", +#else + : "a2", "a3", "a4", "a7", "a11", "a12", "a13", "a14", "a15", +#endif + "memory"); +} + #endif /* _XTENSA_TRAPS_H */ diff --git a/arch/xtensa/include/asm/unistd.h b/arch/xtensa/include/asm/unistd.h index eb63ea87815..cb4c2ce8d44 100644 --- a/arch/xtensa/include/asm/unistd.h +++ b/arch/xtensa/include/asm/unistd.h @@ -4,19 +4,9 @@ #define __ARCH_WANT_SYS_CLONE #include <uapi/asm/unistd.h> -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall"); - #define __ARCH_WANT_STAT64 #define __ARCH_WANT_SYS_UTIME #define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_RT_SIGACTION -#define __ARCH_WANT_SYS_RT_SIGSUSPEND #define __ARCH_WANT_SYS_GETPGRP /* diff --git a/arch/xtensa/include/asm/vectors.h b/arch/xtensa/include/asm/vectors.h new file mode 100644 index 00000000000..c52b656d031 --- /dev/null +++ b/arch/xtensa/include/asm/vectors.h @@ -0,0 +1,125 @@ +/* + * arch/xtensa/include/asm/xchal_vaddr_remap.h + * + * Xtensa macros for MMU V3 Support. Deals with re-mapping the Virtual + * Memory Addresses from "Virtual == Physical" to their prevvious V2 MMU + * mappings (KSEG at 0xD0000000 and KIO at 0XF0000000). + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 - 2012 Tensilica Inc. + * + * Pete Delaney <piet@tensilica.com> + * Marc Gauthier <marc@tensilica.com + */ + +#ifndef _XTENSA_VECTORS_H +#define _XTENSA_VECTORS_H + +#include <variant/core.h> + +#if defined(CONFIG_MMU) + +/* Will Become VECBASE */ +#define VIRTUAL_MEMORY_ADDRESS 0xD0000000 + +/* Image Virtual Start Address */ +#define KERNELOFFSET 0xD0003000 + +#if defined(XCHAL_HAVE_PTP_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY + /* MMU v3 - XCHAL_HAVE_PTP_MMU == 1 */ + #define PHYSICAL_MEMORY_ADDRESS 0x00000000 + #define LOAD_MEMORY_ADDRESS 0x00003000 +#else + /* MMU V2 - XCHAL_HAVE_PTP_MMU == 0 */ + #define PHYSICAL_MEMORY_ADDRESS 0xD0000000 + #define LOAD_MEMORY_ADDRESS 0xD0003000 +#endif + +#else /* !defined(CONFIG_MMU) */ + /* MMU Not being used - Virtual == Physical */ + + /* VECBASE */ + #define VIRTUAL_MEMORY_ADDRESS 0x00002000 + + /* Location of the start of the kernel text, _start */ + #define KERNELOFFSET 0x00003000 + #define PHYSICAL_MEMORY_ADDRESS 0x00000000 + + /* Loaded just above possibly live vectors */ + #define LOAD_MEMORY_ADDRESS 0x00003000 + +#endif /* CONFIG_MMU */ + +#define XC_VADDR(offset) (VIRTUAL_MEMORY_ADDRESS + offset) +#define XC_PADDR(offset) (PHYSICAL_MEMORY_ADDRESS + offset) + +/* Used to set VECBASE register */ +#define VECBASE_RESET_VADDR VIRTUAL_MEMORY_ADDRESS + +#define RESET_VECTOR_VECOFS (XCHAL_RESET_VECTOR_VADDR - \ + VECBASE_RESET_VADDR) +#define RESET_VECTOR_VADDR XC_VADDR(RESET_VECTOR_VECOFS) + +#define RESET_VECTOR1_VECOFS (XCHAL_RESET_VECTOR1_VADDR - \ + VECBASE_RESET_VADDR) +#define RESET_VECTOR1_VADDR XC_VADDR(RESET_VECTOR1_VECOFS) + +#if XCHAL_HAVE_VECBASE + +#define USER_VECTOR_VADDR XC_VADDR(XCHAL_USER_VECOFS) +#define KERNEL_VECTOR_VADDR XC_VADDR(XCHAL_KERNEL_VECOFS) +#define DOUBLEEXC_VECTOR_VADDR XC_VADDR(XCHAL_DOUBLEEXC_VECOFS) +#define WINDOW_VECTORS_VADDR XC_VADDR(XCHAL_WINDOW_OF4_VECOFS) +#define INTLEVEL2_VECTOR_VADDR XC_VADDR(XCHAL_INTLEVEL2_VECOFS) +#define INTLEVEL3_VECTOR_VADDR XC_VADDR(XCHAL_INTLEVEL3_VECOFS) +#define INTLEVEL4_VECTOR_VADDR XC_VADDR(XCHAL_INTLEVEL4_VECOFS) +#define INTLEVEL5_VECTOR_VADDR XC_VADDR(XCHAL_INTLEVEL5_VECOFS) +#define INTLEVEL6_VECTOR_VADDR XC_VADDR(XCHAL_INTLEVEL6_VECOFS) + +#define DEBUG_VECTOR_VADDR XC_VADDR(XCHAL_DEBUG_VECOFS) + +#undef XCHAL_NMI_VECTOR_VADDR +#define XCHAL_NMI_VECTOR_VADDR XC_VADDR(XCHAL_NMI_VECOFS) + +#undef XCHAL_INTLEVEL7_VECTOR_VADDR +#define XCHAL_INTLEVEL7_VECTOR_VADDR XC_VADDR(XCHAL_INTLEVEL7_VECOFS) + +/* + * These XCHAL_* #defines from varian/core.h + * are not valid to use with V3 MMU. Non-XCHAL + * constants are defined above and should be used. + */ +#undef XCHAL_VECBASE_RESET_VADDR +#undef XCHAL_RESET_VECTOR0_VADDR +#undef XCHAL_USER_VECTOR_VADDR +#undef XCHAL_KERNEL_VECTOR_VADDR +#undef XCHAL_DOUBLEEXC_VECTOR_VADDR +#undef XCHAL_WINDOW_VECTORS_VADDR +#undef XCHAL_INTLEVEL2_VECTOR_VADDR +#undef XCHAL_INTLEVEL3_VECTOR_VADDR +#undef XCHAL_INTLEVEL4_VECTOR_VADDR +#undef XCHAL_INTLEVEL5_VECTOR_VADDR +#undef XCHAL_INTLEVEL6_VECTOR_VADDR +#undef XCHAL_DEBUG_VECTOR_VADDR +#undef XCHAL_NMI_VECTOR_VADDR +#undef XCHAL_INTLEVEL7_VECTOR_VADDR + +#else + +#define USER_VECTOR_VADDR XCHAL_USER_VECTOR_VADDR +#define KERNEL_VECTOR_VADDR XCHAL_KERNEL_VECTOR_VADDR +#define DOUBLEEXC_VECTOR_VADDR XCHAL_DOUBLEEXC_VECTOR_VADDR +#define WINDOW_VECTORS_VADDR XCHAL_WINDOW_VECTORS_VADDR +#define INTLEVEL2_VECTOR_VADDR XCHAL_INTLEVEL2_VECTOR_VADDR +#define INTLEVEL3_VECTOR_VADDR XCHAL_INTLEVEL3_VECTOR_VADDR +#define INTLEVEL4_VECTOR_VADDR XCHAL_INTLEVEL4_VECTOR_VADDR +#define INTLEVEL5_VECTOR_VADDR XCHAL_INTLEVEL5_VECTOR_VADDR +#define INTLEVEL6_VECTOR_VADDR XCHAL_INTLEVEL6_VECTOR_VADDR +#define DEBUG_VECTOR_VADDR XCHAL_DEBUG_VECTOR_VADDR + +#endif + +#endif /* _XTENSA_VECTORS_H */ diff --git a/arch/xtensa/include/uapi/asm/signal.h b/arch/xtensa/include/uapi/asm/signal.h index dacf716dd3e..586756ee267 100644 --- a/arch/xtensa/include/uapi/asm/signal.h +++ b/arch/xtensa/include/uapi/asm/signal.h @@ -102,16 +102,7 @@ typedef struct { #ifndef __ASSEMBLY__ -#define SIG_BLOCK 0 /* for blocking signals */ -#define SIG_UNBLOCK 1 /* for unblocking signals */ -#define SIG_SETMASK 2 /* for setting the signal mask */ - -/* Type of a signal handler. */ -typedef void (*__sighandler_t)(int); - -#define SIG_DFL ((__sighandler_t)0) /* default signal handling */ -#define SIG_IGN ((__sighandler_t)1) /* ignore signal */ -#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */ +#include <asm-generic/signal-defs.h> #ifndef __KERNEL__ diff --git a/arch/xtensa/include/uapi/asm/socket.h b/arch/xtensa/include/uapi/asm/socket.h index 38079be1cf1..a8f44f50e65 100644 --- a/arch/xtensa/include/uapi/asm/socket.h +++ b/arch/xtensa/include/uapi/asm/socket.h @@ -32,7 +32,7 @@ #define SO_PRIORITY 12 #define SO_LINGER 13 #define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ +#define SO_REUSEPORT 15 #define SO_PASSCRED 16 #define SO_PEERCRED 17 #define SO_RCVLOWAT 18 @@ -81,4 +81,8 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#define SO_LOCK_FILTER 44 + +#define SO_SELECT_ERR_QUEUE 45 + #endif /* _XTENSA_SOCKET_H */ diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h index 5162418c5d9..51940fec699 100644 --- a/arch/xtensa/include/uapi/asm/unistd.h +++ b/arch/xtensa/include/uapi/asm/unistd.h @@ -483,7 +483,7 @@ __SYSCALL(222, sys_ni_syscall, 0) #define __NR_restart_syscall 223 __SYSCALL(223, sys_restart_syscall, 0) #define __NR_sigaltstack 224 -__SYSCALL(224, xtensa_sigaltstack, 2) +__SYSCALL(224, sys_sigaltstack, 2) #define __NR_rt_sigreturn 225 __SYSCALL(225, xtensa_rt_sigreturn, 1) #define __NR_rt_sigaction 226 @@ -728,8 +728,13 @@ __SYSCALL(330, sys_prlimit64, 4) #define __NR_kcmp 331 __SYSCALL(331, sys_kcmp, 5) +#define __NR_finit_module 332 +__SYSCALL(332, sys_finit_module, 3) -#define __NR_syscall_count 332 +#define __NR_accept4 333 +__SYSCALL(333, sys_accept4, 4) + +#define __NR_syscall_count 334 /* * sysxtensa syscall handler diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile index c3a59d992ac..1e7fc87a94b 100644 --- a/arch/xtensa/kernel/Makefile +++ b/arch/xtensa/kernel/Makefile @@ -4,14 +4,16 @@ extra-y := head.o vmlinux.lds -obj-y := align.o entry.o irq.o coprocessor.o process.o ptrace.o \ - setup.o signal.o syscall.o time.o traps.o vectors.o platform.o \ - pci-dma.o +obj-y := align.o coprocessor.o entry.o irq.o pci-dma.o platform.o process.o \ + ptrace.o setup.o signal.o stacktrace.o syscall.o time.o traps.o \ + vectors.o obj-$(CONFIG_KGDB) += xtensa-stub.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_MODULES) += xtensa_ksyms.o module.o +AFLAGS_head.o += -mtext-section-literals + # In the Xtensa architecture, assembly generates literals which must always # precede the L32R instruction with a relative offset less than 256 kB. # Therefore, the .text and .literal section must be combined in parenthesis diff --git a/arch/xtensa/kernel/asm-offsets.c b/arch/xtensa/kernel/asm-offsets.c index 0701fad170d..1915c7c889b 100644 --- a/arch/xtensa/kernel/asm-offsets.c +++ b/arch/xtensa/kernel/asm-offsets.c @@ -42,6 +42,7 @@ int main(void) DEFINE(PT_ICOUNTLEVEL, offsetof (struct pt_regs, icountlevel)); DEFINE(PT_SYSCALL, offsetof (struct pt_regs, syscall)); DEFINE(PT_SCOMPARE1, offsetof(struct pt_regs, scompare1)); + DEFINE(PT_THREADPTR, offsetof(struct pt_regs, threadptr)); DEFINE(PT_AREG, offsetof (struct pt_regs, areg[0])); DEFINE(PT_AREG0, offsetof (struct pt_regs, areg[0])); DEFINE(PT_AREG1, offsetof (struct pt_regs, areg[1])); diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index 3777fec85e7..5082507d563 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -7,7 +7,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2004-2007 by Tensilica Inc. + * Copyright (C) 2004 - 2008 by Tensilica Inc. * * Chris Zankel <chris@zankel.net> * @@ -130,6 +130,11 @@ _user_exception: s32i a3, a1, PT_SAR s32i a2, a1, PT_ICOUNTLEVEL +#if XCHAL_HAVE_THREADPTR + rur a2, threadptr + s32i a2, a1, PT_THREADPTR +#endif + /* Rotate ws so that the current windowbase is at bit0. */ /* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */ @@ -349,15 +354,16 @@ common_exception: * so we can allow exceptions and interrupts (*) again. * Set PS(EXCM = 0, UM = 0, RING = 0, OWB = 0, WOE = 1, INTLEVEL = X) * - * (*) We only allow interrupts if PS.INTLEVEL was not set to 1 before - * (interrupts disabled) and if this exception is not an interrupt. + * (*) We only allow interrupts if they were previously enabled and + * we're not handling an IRQ */ rsr a3, ps - addi a0, a0, -4 - movi a2, 1 - extui a3, a3, 0, 1 # a3 = PS.INTLEVEL[0] - moveqz a3, a2, a0 # a3 = 1 iff interrupt exception + addi a0, a0, -EXCCAUSE_LEVEL1_INTERRUPT + movi a2, LOCKLEVEL + extui a3, a3, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH + # a3 = PS.INTLEVEL + moveqz a3, a2, a0 # a3 = LOCKLEVEL iff interrupt movi a2, 1 << PS_WOE_BIT or a3, a3, a2 rsr a0, exccause @@ -383,6 +389,22 @@ common_exception: save_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT +#ifdef CONFIG_TRACE_IRQFLAGS + l32i a4, a1, PT_DEPC + /* Double exception means we came here with an exception + * while PS.EXCM was set, i.e. interrupts disabled. + */ + bgeui a4, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f + l32i a4, a1, PT_EXCCAUSE + bnei a4, EXCCAUSE_LEVEL1_INTERRUPT, 1f + /* We came here with an interrupt means interrupts were enabled + * and we've just disabled them. + */ + movi a4, trace_hardirqs_off + callx4 a4 +1: +#endif + /* Go to second-level dispatcher. Set up parameters to pass to the * exception handler and call the exception handler. */ @@ -398,14 +420,32 @@ common_exception: callx4 a4 /* Jump here for exception exit */ - + .global common_exception_return common_exception_return: +#ifdef CONFIG_TRACE_IRQFLAGS + l32i a4, a1, PT_DEPC + /* Double exception means we came here with an exception + * while PS.EXCM was set, i.e. interrupts disabled. + */ + bgeui a4, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f + l32i a4, a1, PT_EXCCAUSE + bnei a4, EXCCAUSE_LEVEL1_INTERRUPT, 1f + /* We came here with an interrupt means interrupts were enabled + * and we'll reenable them on return. + */ + movi a4, trace_hardirqs_on + callx4 a4 +1: +#endif + /* Jump if we are returning from kernel exceptions. */ 1: l32i a3, a1, PT_PS _bbci.l a3, PS_UM_BIT, 4f + rsil a2, 0 + /* Specific to a user exception exit: * We need to check some flags for signal handling and rescheduling, * and have to restore WB and WS, extra states, and all registers @@ -509,6 +549,11 @@ user_exception_exit: * (if we have restored WSBITS-1 frames). */ +#if XCHAL_HAVE_THREADPTR + l32i a3, a1, PT_THREADPTR + wur a3, threadptr +#endif + 2: j common_exception_exit /* This is the kernel exception exit. @@ -650,7 +695,7 @@ common_exception_exit: l32i a1, a1, PT_AREG1 rfe -1: wsr a0, depc +1: wsr a0, depc l32i a0, a1, PT_AREG0 l32i a1, a1, PT_AREG1 rfde @@ -753,7 +798,7 @@ ENTRY(unrecoverable_exception) wsr a1, windowbase rsync - movi a1, (1 << PS_WOE_BIT) | 1 + movi a1, (1 << PS_WOE_BIT) | LOCKLEVEL wsr a1, ps rsync @@ -1474,7 +1519,7 @@ ENTRY(_spill_registers) l32i a1, a3, EXC_TABLE_KSTK wsr a3, excsave1 - movi a4, (1 << PS_WOE_BIT) | 1 + movi a4, (1 << PS_WOE_BIT) | LOCKLEVEL wsr a4, ps rsync @@ -1922,7 +1967,7 @@ ENTRY(_switch_to) s32i a6, a3, EXC_TABLE_FIXUP s32i a7, a3, EXC_TABLE_KSTK - /* restore context of the task that 'next' addresses */ + /* restore context of the task 'next' */ l32i a0, a13, THREAD_RA # restore return address l32i a1, a13, THREAD_SP # restore stack pointer diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S index 91d9095284d..ef12c0e6fa2 100644 --- a/arch/xtensa/kernel/head.S +++ b/arch/xtensa/kernel/head.S @@ -7,7 +7,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2001 - 2005 Tensilica Inc. + * Copyright (C) 2001 - 2008 Tensilica Inc. * * Chris Zankel <chris@zankel.net> * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca> @@ -48,17 +48,36 @@ */ __HEAD + .begin no-absolute-literals + ENTRY(_start) - _j 2f + /* Preserve the pointer to the boot parameter list in EXCSAVE_1 */ + wsr a2, excsave1 + _j _SetupMMU + + .align 4 + .literal_position +.Lstartup: + .word _startup + .align 4 -1: .word _startup -2: l32r a0, 1b + .global _SetupMMU +_SetupMMU: + Offset = _SetupMMU - _start + +#ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX + initialize_mmu +#endif + .end no-absolute-literals + + l32r a0, .Lstartup jx a0 ENDPROC(_start) - .section .init.text, "ax" + __INIT + .literal_position ENTRY(_startup) @@ -67,10 +86,6 @@ ENTRY(_startup) movi a0, LOCKLEVEL wsr a0, ps - /* Preserve the pointer to the boot parameter list in EXCSAVE_1 */ - - wsr a2, excsave1 - /* Start with a fresh windowbase and windowstart. */ movi a1, 1 @@ -86,7 +101,9 @@ ENTRY(_startup) /* Clear debugging registers. */ #if XCHAL_HAVE_DEBUG +#if XCHAL_NUM_IBREAK > 0 wsr a0, ibreakenable +#endif wsr a0, icount movi a1, 15 wsr a0, icountlevel @@ -128,14 +145,14 @@ ENTRY(_startup) wsr a0, cpenable #endif - /* Set PS.INTLEVEL=1, PS.WOE=0, kernel stack, PS.EXCM=0 + /* Set PS.INTLEVEL=LOCKLEVEL, PS.WOE=0, kernel stack, PS.EXCM=0 * * Note: PS.EXCM must be cleared before using any loop * instructions; otherwise, they are silently disabled, and * at most one iteration of the loop is executed. */ - movi a1, 1 + movi a1, LOCKLEVEL wsr a1, ps rsync @@ -156,8 +173,6 @@ ENTRY(_startup) isync - initialize_mmu - /* Unpack data sections * * The linker script used to build the Linux kernel image @@ -205,13 +220,18 @@ ENTRY(_startup) ___flush_dcache_all a2 a3 #endif + memw + isync + ___invalidate_icache_all a2 a3 + isync /* Setup stack and enable window exceptions (keep irqs disabled) */ movi a1, init_thread_union addi a1, a1, KERNEL_STACK_SIZE - movi a2, 0x00040001 # WOE=1, INTLEVEL=1, UM=0 + movi a2, (1 << PS_WOE_BIT) | LOCKLEVEL + # WOE=1, INTLEVEL=LOCKLEVEL, UM=0 wsr a2, ps # (enable reg-windows; progmode stack) rsync diff --git a/arch/xtensa/kernel/platform.c b/arch/xtensa/kernel/platform.c index 44bf21c3769..2bd6c351f37 100644 --- a/arch/xtensa/kernel/platform.c +++ b/arch/xtensa/kernel/platform.c @@ -36,6 +36,7 @@ _F(void, power_off, (void), { while(1); }); _F(void, idle, (void), { __asm__ __volatile__ ("waiti 0" ::: "memory"); }); _F(void, heartbeat, (void), { }); _F(int, pcibios_fixup, (void), { return 0; }); +_F(void, pcibios_init, (void), { }); #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT _F(void, calibrate_ccount, (void), diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index 0dd5784416d..1c85323f01d 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -105,19 +105,9 @@ void coprocessor_flush_all(struct thread_info *ti) /* * Powermanagement idle function, if any is provided by the platform. */ - -void cpu_idle(void) +void arch_cpu_idle(void) { - local_irq_enable(); - - /* endless idle loop with no priority at all */ - while (1) { - rcu_idle_enter(); - while (!need_resched()) - platform_idle(); - rcu_idle_exit(); - schedule_preempt_disabled(); - } + platform_idle(); } /* @@ -259,9 +249,10 @@ int copy_thread(unsigned long clone_flags, unsigned long usp_thread_fn, memcpy(&childregs->areg[XCHAL_NUM_AREGS - len/4], ®s->areg[XCHAL_NUM_AREGS - len/4], len); } -// FIXME: we need to set THREADPTR in thread_info... + + /* The thread pointer is passed in the '4th argument' (= a5) */ if (clone_flags & CLONE_SETTLS) - childregs->areg[2] = childregs->areg[6]; + childregs->threadptr = childregs->areg[5]; } else { p->thread.ra = MAKE_RA_FOR_CALL( (unsigned long)ret_from_kernel_thread, 1); diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c index 61fb2e9e903..562fac66475 100644 --- a/arch/xtensa/kernel/ptrace.c +++ b/arch/xtensa/kernel/ptrace.c @@ -53,9 +53,8 @@ int ptrace_getregs(struct task_struct *child, void __user *uregs) { struct pt_regs *regs = task_pt_regs(child); xtensa_gregset_t __user *gregset = uregs; - unsigned long wm = regs->wmask; unsigned long wb = regs->windowbase; - int live, i; + int i; if (!access_ok(VERIFY_WRITE, uregs, sizeof(xtensa_gregset_t))) return -EIO; @@ -67,13 +66,11 @@ int ptrace_getregs(struct task_struct *child, void __user *uregs) __put_user(regs->lcount, &gregset->lcount); __put_user(regs->windowstart, &gregset->windowstart); __put_user(regs->windowbase, &gregset->windowbase); + __put_user(regs->threadptr, &gregset->threadptr); - live = (wm & 2) ? 4 : (wm & 4) ? 8 : (wm & 8) ? 12 : 16; - - for (i = 0; i < live; i++) - __put_user(regs->areg[i],gregset->a+((wb*4+i)%XCHAL_NUM_AREGS)); - for (i = XCHAL_NUM_AREGS - (wm >> 4) * 4; i < XCHAL_NUM_AREGS; i++) - __put_user(regs->areg[i],gregset->a+((wb*4+i)%XCHAL_NUM_AREGS)); + for (i = 0; i < XCHAL_NUM_AREGS; i++) + __put_user(regs->areg[i], + gregset->a + ((wb * 4 + i) % XCHAL_NUM_AREGS)); return 0; } @@ -84,7 +81,7 @@ int ptrace_setregs(struct task_struct *child, void __user *uregs) xtensa_gregset_t *gregset = uregs; const unsigned long ps_mask = PS_CALLINC_MASK | PS_OWB_MASK; unsigned long ps; - unsigned long wb; + unsigned long wb, ws; if (!access_ok(VERIFY_WRITE, uregs, sizeof(xtensa_gregset_t))) return -EIO; @@ -94,21 +91,33 @@ int ptrace_setregs(struct task_struct *child, void __user *uregs) __get_user(regs->lbeg, &gregset->lbeg); __get_user(regs->lend, &gregset->lend); __get_user(regs->lcount, &gregset->lcount); - __get_user(regs->windowstart, &gregset->windowstart); + __get_user(ws, &gregset->windowstart); __get_user(wb, &gregset->windowbase); + __get_user(regs->threadptr, &gregset->threadptr); regs->ps = (regs->ps & ~ps_mask) | (ps & ps_mask) | (1 << PS_EXCM_BIT); if (wb >= XCHAL_NUM_AREGS / 4) return -EFAULT; - regs->windowbase = wb; + if (wb != regs->windowbase || ws != regs->windowstart) { + unsigned long rotws, wmask; + + rotws = (((ws | (ws << WSBITS)) >> wb) & + ((1 << WSBITS) - 1)) & ~1; + wmask = ((rotws ? WSBITS + 1 - ffs(rotws) : 0) << 4) | + (rotws & 0xF) | 1; + regs->windowbase = wb; + regs->windowstart = ws; + regs->wmask = wmask; + } if (wb != 0 && __copy_from_user(regs->areg + XCHAL_NUM_AREGS - wb * 4, - gregset->a, wb * 16)) + gregset->a, wb * 16)) return -EFAULT; - if (__copy_from_user(regs->areg, gregset->a + wb*4, (WSBITS-wb) * 16)) + if (__copy_from_user(regs->areg, gregset->a + wb * 4, + (WSBITS - wb) * 16)) return -EFAULT; return 0; diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c index 24c1a57abb4..6dd25ecde3f 100644 --- a/arch/xtensa/kernel/setup.c +++ b/arch/xtensa/kernel/setup.c @@ -328,6 +328,27 @@ extern char _UserExceptionVector_literal_start; extern char _UserExceptionVector_text_end; extern char _DoubleExceptionVector_literal_start; extern char _DoubleExceptionVector_text_end; +#if XCHAL_EXCM_LEVEL >= 2 +extern char _Level2InterruptVector_text_start; +extern char _Level2InterruptVector_text_end; +#endif +#if XCHAL_EXCM_LEVEL >= 3 +extern char _Level3InterruptVector_text_start; +extern char _Level3InterruptVector_text_end; +#endif +#if XCHAL_EXCM_LEVEL >= 4 +extern char _Level4InterruptVector_text_start; +extern char _Level4InterruptVector_text_end; +#endif +#if XCHAL_EXCM_LEVEL >= 5 +extern char _Level5InterruptVector_text_start; +extern char _Level5InterruptVector_text_end; +#endif +#if XCHAL_EXCM_LEVEL >= 6 +extern char _Level6InterruptVector_text_start; +extern char _Level6InterruptVector_text_end; +#endif + #ifdef CONFIG_S32C1I_SELFTEST @@ -482,6 +503,27 @@ void __init setup_arch(char **cmdline_p) mem_reserve(__pa(&_DoubleExceptionVector_literal_start), __pa(&_DoubleExceptionVector_text_end), 0); +#if XCHAL_EXCM_LEVEL >= 2 + mem_reserve(__pa(&_Level2InterruptVector_text_start), + __pa(&_Level2InterruptVector_text_end), 0); +#endif +#if XCHAL_EXCM_LEVEL >= 3 + mem_reserve(__pa(&_Level3InterruptVector_text_start), + __pa(&_Level3InterruptVector_text_end), 0); +#endif +#if XCHAL_EXCM_LEVEL >= 4 + mem_reserve(__pa(&_Level4InterruptVector_text_start), + __pa(&_Level4InterruptVector_text_end), 0); +#endif +#if XCHAL_EXCM_LEVEL >= 5 + mem_reserve(__pa(&_Level5InterruptVector_text_start), + __pa(&_Level5InterruptVector_text_end), 0); +#endif +#if XCHAL_EXCM_LEVEL >= 6 + mem_reserve(__pa(&_Level6InterruptVector_text_start), + __pa(&_Level6InterruptVector_text_end), 0); +#endif + bootmem_init(); #ifdef CONFIG_OF diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c index de34d6be91c..718eca1850b 100644 --- a/arch/xtensa/kernel/signal.c +++ b/arch/xtensa/kernel/signal.c @@ -265,7 +265,7 @@ asmlinkage long xtensa_rt_sigreturn(long a0, long a1, long a2, long a3, ret = regs->areg[2]; - if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->areg[1]) == -EFAULT) + if (restore_altstack(&frame->uc.uc_stack)) goto badframe; return ret; @@ -337,7 +337,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, siginfo_t *info, struct rt_sigframe *frame; int err = 0; int signal; - unsigned long sp, ra; + unsigned long sp, ra, tp; sp = regs->areg[1]; @@ -368,11 +368,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, siginfo_t *info, err |= __put_user(0, &frame->uc.uc_flags); err |= __put_user(0, &frame->uc.uc_link); - err |= __put_user((void *)current->sas_ss_sp, - &frame->uc.uc_stack.ss_sp); - err |= __put_user(sas_ss_flags(regs->areg[1]), - &frame->uc.uc_stack.ss_flags); - err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= __save_altstack(&frame->uc.uc_stack, regs->areg[1]); err |= setup_sigcontext(frame, regs); err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); @@ -395,7 +391,8 @@ static int setup_frame(int sig, struct k_sigaction *ka, siginfo_t *info, * Return context not modified until this point. */ - /* Set up registers for signal handler */ + /* Set up registers for signal handler; preserve the threadptr */ + tp = regs->threadptr; start_thread(regs, (unsigned long) ka->sa.sa_handler, (unsigned long) frame); @@ -406,6 +403,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, siginfo_t *info, regs->areg[6] = (unsigned long) signal; regs->areg[7] = (unsigned long) &frame->info; regs->areg[8] = (unsigned long) &frame->uc; + regs->threadptr = tp; /* Set access mode to USER_DS. Nomenclature is outdated, but * functionality is used in uaccess.h @@ -424,16 +422,6 @@ give_sigsegv: return -EFAULT; } -asmlinkage long xtensa_sigaltstack(const stack_t __user *uss, - stack_t __user *uoss, - long a2, long a3, long a4, long a5, - struct pt_regs *regs) -{ - return do_sigaltstack(uss, uoss, regs->areg[1]); -} - - - /* * Note that 'init' is a special process: it doesn't get signals it doesn't * want to handle. Thus you cannot kill init even with a SIGKILL even by diff --git a/arch/xtensa/kernel/stacktrace.c b/arch/xtensa/kernel/stacktrace.c new file mode 100644 index 00000000000..7d2c317bd98 --- /dev/null +++ b/arch/xtensa/kernel/stacktrace.c @@ -0,0 +1,120 @@ +/* + * arch/xtensa/kernel/stacktrace.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2013 Tensilica Inc. + */ +#include <linux/export.h> +#include <linux/sched.h> +#include <linux/stacktrace.h> + +#include <asm/stacktrace.h> +#include <asm/traps.h> + +void walk_stackframe(unsigned long *sp, + int (*fn)(struct stackframe *frame, void *data), + void *data) +{ + unsigned long a0, a1; + unsigned long sp_end; + + a1 = (unsigned long)sp; + sp_end = ALIGN(a1, THREAD_SIZE); + + spill_registers(); + + while (a1 < sp_end) { + struct stackframe frame; + + sp = (unsigned long *)a1; + + a0 = *(sp - 4); + a1 = *(sp - 3); + + if (a1 <= (unsigned long)sp) + break; + + frame.pc = MAKE_PC_FROM_RA(a0, a1); + frame.sp = a1; + + if (fn(&frame, data)) + return; + } +} + +#ifdef CONFIG_STACKTRACE + +struct stack_trace_data { + struct stack_trace *trace; + unsigned skip; +}; + +static int stack_trace_cb(struct stackframe *frame, void *data) +{ + struct stack_trace_data *trace_data = data; + struct stack_trace *trace = trace_data->trace; + + if (trace_data->skip) { + --trace_data->skip; + return 0; + } + if (!kernel_text_address(frame->pc)) + return 0; + + trace->entries[trace->nr_entries++] = frame->pc; + return trace->nr_entries >= trace->max_entries; +} + +void save_stack_trace_tsk(struct task_struct *task, struct stack_trace *trace) +{ + struct stack_trace_data trace_data = { + .trace = trace, + .skip = trace->skip, + }; + walk_stackframe(stack_pointer(task), stack_trace_cb, &trace_data); +} +EXPORT_SYMBOL_GPL(save_stack_trace_tsk); + +void save_stack_trace(struct stack_trace *trace) +{ + save_stack_trace_tsk(current, trace); +} +EXPORT_SYMBOL_GPL(save_stack_trace); + +#endif + +#ifdef CONFIG_FRAME_POINTER + +struct return_addr_data { + unsigned long addr; + unsigned skip; +}; + +static int return_address_cb(struct stackframe *frame, void *data) +{ + struct return_addr_data *r = data; + + if (r->skip) { + --r->skip; + return 0; + } + if (!kernel_text_address(frame->pc)) + return 0; + r->addr = frame->pc; + return 1; +} + +unsigned long return_address(unsigned level) +{ + struct return_addr_data r = { + .skip = level + 1, + }; + walk_stackframe(stack_pointer(NULL), return_address_cb, &r); + return r.addr; +} +EXPORT_SYMBOL(return_address); + +#endif diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c index 54fa8425cee..5d3f7a119ed 100644 --- a/arch/xtensa/kernel/syscall.c +++ b/arch/xtensa/kernel/syscall.c @@ -36,6 +36,10 @@ syscall_t sys_call_table[__NR_syscall_count] /* FIXME __cacheline_aligned */= { #include <uapi/asm/unistd.h> }; +#define COLOUR_ALIGN(addr, pgoff) \ + ((((addr) + SHMLBA - 1) & ~(SHMLBA - 1)) + \ + (((pgoff) << PAGE_SHIFT) & (SHMLBA - 1))) + asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg) { unsigned long ret; @@ -52,3 +56,40 @@ asmlinkage long xtensa_fadvise64_64(int fd, int advice, { return sys_fadvise64_64(fd, offset, len, advice); } + +unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, + unsigned long len, unsigned long pgoff, unsigned long flags) +{ + struct vm_area_struct *vmm; + + if (flags & MAP_FIXED) { + /* We do not accept a shared mapping if it would violate + * cache aliasing constraints. + */ + if ((flags & MAP_SHARED) && + ((addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))) + return -EINVAL; + return addr; + } + + if (len > TASK_SIZE) + return -ENOMEM; + if (!addr) + addr = TASK_UNMAPPED_BASE; + + if (flags & MAP_SHARED) + addr = COLOUR_ALIGN(addr, pgoff); + else + addr = PAGE_ALIGN(addr); + + for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) { + /* At this point: (!vmm || addr < vmm->vm_end). */ + if (TASK_SIZE - len < addr) + return -ENOMEM; + if (!vmm || addr + len <= vmm->vm_start) + return addr; + addr = vmm->vm_end; + if (flags & MAP_SHARED) + addr = COLOUR_ALIGN(addr, pgoff); + } +} diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c index 01e0111bf78..3e8a05c874c 100644 --- a/arch/xtensa/kernel/traps.c +++ b/arch/xtensa/kernel/traps.c @@ -11,7 +11,7 @@ * * Essentially rewritten for the Xtensa architecture port. * - * Copyright (C) 2001 - 2005 Tensilica Inc. + * Copyright (C) 2001 - 2013 Tensilica Inc. * * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> * Chris Zankel <chris@zankel.net> @@ -32,11 +32,13 @@ #include <linux/delay.h> #include <linux/hardirq.h> +#include <asm/stacktrace.h> #include <asm/ptrace.h> #include <asm/timex.h> #include <asm/uaccess.h> #include <asm/pgtable.h> #include <asm/processor.h> +#include <asm/traps.h> #ifdef CONFIG_KGDB extern int gdb_enter; @@ -193,28 +195,51 @@ void do_multihit(struct pt_regs *regs, unsigned long exccause) } /* - * Level-1 interrupt. - * We currently have no priority encoding. + * IRQ handler. */ -unsigned long ignored_level1_interrupts; extern void do_IRQ(int, struct pt_regs *); -void do_interrupt (struct pt_regs *regs) +void do_interrupt(struct pt_regs *regs) { - unsigned long intread = get_sr (interrupt); - unsigned long intenable = get_sr (intenable); - int i, mask; + static const unsigned int_level_mask[] = { + 0, + XCHAL_INTLEVEL1_MASK, + XCHAL_INTLEVEL2_MASK, + XCHAL_INTLEVEL3_MASK, + XCHAL_INTLEVEL4_MASK, + XCHAL_INTLEVEL5_MASK, + XCHAL_INTLEVEL6_MASK, + XCHAL_INTLEVEL7_MASK, + }; - /* Handle all interrupts (no priorities). - * (Clear the interrupt before processing, in case it's - * edge-triggered or software-generated) - */ + for (;;) { + unsigned intread = get_sr(interrupt); + unsigned intenable = get_sr(intenable); + unsigned int_at_level = intread & intenable; + unsigned level; + + for (level = LOCKLEVEL; level > 0; --level) { + if (int_at_level & int_level_mask[level]) { + int_at_level &= int_level_mask[level]; + break; + } + } + + if (level == 0) + return; - for (i=0, mask = 1; i < XCHAL_NUM_INTERRUPTS; i++, mask <<= 1) { - if (mask & (intread & intenable)) { - set_sr (mask, intclear); - do_IRQ (i,regs); + /* + * Clear the interrupt before processing, in case it's + * edge-triggered or software-generated + */ + while (int_at_level) { + unsigned i = __ffs(int_at_level); + unsigned mask = 1 << i; + + int_at_level ^= mask; + set_sr(mask, intclear); + do_IRQ(i, regs); } } } @@ -361,6 +386,8 @@ void show_regs(struct pt_regs * regs) { int i, wmask; + show_regs_print_info(KERN_DEFAULT); + wmask = regs->wmask & ~1; for (i = 0; i < 16; i++) { @@ -380,73 +407,25 @@ void show_regs(struct pt_regs * regs) regs->syscall); } -static __always_inline unsigned long *stack_pointer(struct task_struct *task) +static int show_trace_cb(struct stackframe *frame, void *data) { - unsigned long *sp; - - if (!task || task == current) - __asm__ __volatile__ ("mov %0, a1\n" : "=a"(sp)); - else - sp = (unsigned long *)task->thread.sp; - - return sp; -} - -static inline void spill_registers(void) -{ - unsigned int a0, ps; - - __asm__ __volatile__ ( - "movi a14, " __stringify(PS_EXCM_BIT | 1) "\n\t" - "mov a12, a0\n\t" - "rsr a13, sar\n\t" - "xsr a14, ps\n\t" - "movi a0, _spill_registers\n\t" - "rsync\n\t" - "callx0 a0\n\t" - "mov a0, a12\n\t" - "wsr a13, sar\n\t" - "wsr a14, ps\n\t" - :: "a" (&a0), "a" (&ps) - : "a2", "a3", "a4", "a7", "a11", "a12", "a13", "a14", "a15", - "memory"); + if (kernel_text_address(frame->pc)) { + printk(" [<%08lx>] ", frame->pc); + print_symbol("%s\n", frame->pc); + } + return 0; } void show_trace(struct task_struct *task, unsigned long *sp) { - unsigned long a0, a1, pc; - unsigned long sp_start, sp_end; - - if (sp) - a1 = (unsigned long)sp; - else - a1 = (unsigned long)stack_pointer(task); - - sp_start = a1 & ~(THREAD_SIZE-1); - sp_end = sp_start + THREAD_SIZE; + if (!sp) + sp = stack_pointer(task); printk("Call Trace:"); #ifdef CONFIG_KALLSYMS printk("\n"); #endif - spill_registers(); - - while (a1 > sp_start && a1 < sp_end) { - sp = (unsigned long*)a1; - - a0 = *(sp - 4); - a1 = *(sp - 3); - - if (a1 <= (unsigned long) sp) - break; - - pc = MAKE_PC_FROM_RA(a0, a1); - - if (kernel_text_address(pc)) { - printk(" [<%08lx>] ", pc); - print_symbol("%s\n", pc); - } - } + walk_stackframe(sp, show_trace_cb, NULL); printk("\n"); } @@ -479,14 +458,6 @@ void show_stack(struct task_struct *task, unsigned long *sp) show_trace(task, stack); } -void dump_stack(void) -{ - show_stack(current, NULL); -} - -EXPORT_SYMBOL(dump_stack); - - void show_code(unsigned int *pc) { long i; @@ -524,7 +495,7 @@ void die(const char * str, struct pt_regs * regs, long err) if (!user_mode(regs)) show_stack(NULL, (unsigned long*)regs->areg[1]); - add_taint(TAINT_DIE); + add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE); spin_unlock_irq(&die_lock); if (in_interrupt()) diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S index 68df35f66ce..f9e175382aa 100644 --- a/arch/xtensa/kernel/vectors.S +++ b/arch/xtensa/kernel/vectors.S @@ -10,7 +10,7 @@ * Public License. See the file "COPYING" in the main directory of * this archive for more details. * - * Copyright (C) 2005 Tensilica, Inc. + * Copyright (C) 2005 - 2008 Tensilica, Inc. * * Chris Zankel <chris@zankel.net> * @@ -50,6 +50,7 @@ #include <asm/processor.h> #include <asm/page.h> #include <asm/thread_info.h> +#include <asm/vectors.h> #define WINDOW_VECTORS_SIZE 0x180 @@ -220,7 +221,7 @@ ENTRY(_DoubleExceptionVector) xsr a0, depc # get DEPC, save a0 - movi a3, XCHAL_WINDOW_VECTORS_VADDR + movi a3, WINDOW_VECTORS_VADDR _bltu a0, a3, .Lfixup addi a3, a3, WINDOW_VECTORS_SIZE _bgeu a0, a3, .Lfixup @@ -366,6 +367,44 @@ ENTRY(_DebugInterruptVector) ENDPROC(_DebugInterruptVector) + +/* + * Medium priority level interrupt vectors + * + * Each takes less than 16 (0x10) bytes, no literals, by placing + * the extra 8 bytes that would otherwise be required in the window + * vectors area where there is space. With relocatable vectors, + * all vectors are within ~ 4 kB range of each other, so we can + * simply jump (J) to another vector without having to use JX. + * + * common_exception code gets current IRQ level in PS.INTLEVEL + * and preserves it for the IRQ handling time. + */ + + .macro irq_entry_level level + + .if XCHAL_EXCM_LEVEL >= \level + .section .Level\level\()InterruptVector.text, "ax" +ENTRY(_Level\level\()InterruptVector) + wsr a0, excsave2 + rsr a0, epc\level + wsr a0, epc1 + movi a0, EXCCAUSE_LEVEL1_INTERRUPT + wsr a0, exccause + rsr a0, eps\level + # branch to user or kernel vector + j _SimulateUserKernelVectorException + .endif + + .endm + + irq_entry_level 2 + irq_entry_level 3 + irq_entry_level 4 + irq_entry_level 5 + irq_entry_level 6 + + /* Window overflow and underflow handlers. * The handlers must be 64 bytes apart, first starting with the underflow * handlers underflow-4 to underflow-12, then the overflow handlers @@ -396,6 +435,24 @@ ENTRY_ALIGN64(_WindowOverflow4) ENDPROC(_WindowOverflow4) +#if XCHAL_EXCM_LEVEL >= 2 + /* Not a window vector - but a convenient location + * (where we know there's space) for continuation of + * medium priority interrupt dispatch code. + * On entry here, a0 contains PS, and EPC2 contains saved a0: + */ + .align 4 +_SimulateUserKernelVectorException: + addi a0, a0, (1 << PS_EXCM_BIT) + wsr a0, ps + bbsi.l a0, PS_UM_BIT, 1f # branch if user mode + rsr a0, excsave2 # restore a0 + j _KernelExceptionVector # simulate kernel vector exception +1: rsr a0, excsave2 # restore a0 + j _UserExceptionVector # simulate user vector exception +#endif + + /* 4-Register Window Underflow Vector (Handler) */ ENTRY_ALIGN64(_WindowUnderflow4) diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index 255154f820b..21acd11b5df 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -7,7 +7,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2001 - 2005 Tensilica Inc. + * Copyright (C) 2001 - 2008 Tensilica Inc. * * Chris Zankel <chris@zankel.net> * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca> @@ -18,6 +18,7 @@ #include <asm/page.h> #include <asm/thread_info.h> +#include <asm/vectors.h> #include <variant/core.h> #include <platform/hardware.h> OUTPUT_ARCH(xtensa) @@ -30,7 +31,7 @@ jiffies = jiffies_64; #endif #ifndef KERNELOFFSET -#define KERNELOFFSET 0xd0001000 +#define KERNELOFFSET 0xd0003000 #endif /* Note: In the following macros, it would be nice to specify only the @@ -134,6 +135,26 @@ SECTIONS RELOCATE_ENTRY(_WindowVectors_text, .WindowVectors.text); +#if XCHAL_EXCM_LEVEL >= 2 + RELOCATE_ENTRY(_Level2InterruptVector_text, + .Level2InterruptVector.text); +#endif +#if XCHAL_EXCM_LEVEL >= 3 + RELOCATE_ENTRY(_Level3InterruptVector_text, + .Level3InterruptVector.text); +#endif +#if XCHAL_EXCM_LEVEL >= 4 + RELOCATE_ENTRY(_Level4InterruptVector_text, + .Level4InterruptVector.text); +#endif +#if XCHAL_EXCM_LEVEL >= 5 + RELOCATE_ENTRY(_Level5InterruptVector_text, + .Level5InterruptVector.text); +#endif +#if XCHAL_EXCM_LEVEL >= 6 + RELOCATE_ENTRY(_Level6InterruptVector_text, + .Level6InterruptVector.text); +#endif RELOCATE_ENTRY(_KernelExceptionVector_text, .KernelExceptionVector.text); RELOCATE_ENTRY(_UserExceptionVector_text, @@ -165,46 +186,88 @@ SECTIONS SECTION_VECTOR (_WindowVectors_text, .WindowVectors.text, - XCHAL_WINDOW_VECTORS_VADDR, 4, + WINDOW_VECTORS_VADDR, 4, .dummy) SECTION_VECTOR (_DebugInterruptVector_literal, .DebugInterruptVector.literal, - XCHAL_DEBUG_VECTOR_VADDR - 4, + DEBUG_VECTOR_VADDR - 4, SIZEOF(.WindowVectors.text), .WindowVectors.text) SECTION_VECTOR (_DebugInterruptVector_text, .DebugInterruptVector.text, - XCHAL_DEBUG_VECTOR_VADDR, + DEBUG_VECTOR_VADDR, 4, .DebugInterruptVector.literal) +#undef LAST +#define LAST .DebugInterruptVector.text +#if XCHAL_EXCM_LEVEL >= 2 + SECTION_VECTOR (_Level2InterruptVector_text, + .Level2InterruptVector.text, + INTLEVEL2_VECTOR_VADDR, + SIZEOF(LAST), LAST) +# undef LAST +# define LAST .Level2InterruptVector.text +#endif +#if XCHAL_EXCM_LEVEL >= 3 + SECTION_VECTOR (_Level3InterruptVector_text, + .Level3InterruptVector.text, + INTLEVEL3_VECTOR_VADDR, + SIZEOF(LAST), LAST) +# undef LAST +# define LAST .Level3InterruptVector.text +#endif +#if XCHAL_EXCM_LEVEL >= 4 + SECTION_VECTOR (_Level4InterruptVector_text, + .Level4InterruptVector.text, + INTLEVEL4_VECTOR_VADDR, + SIZEOF(LAST), LAST) +# undef LAST +# define LAST .Level4InterruptVector.text +#endif +#if XCHAL_EXCM_LEVEL >= 5 + SECTION_VECTOR (_Level5InterruptVector_text, + .Level5InterruptVector.text, + INTLEVEL5_VECTOR_VADDR, + SIZEOF(LAST), LAST) +# undef LAST +# define LAST .Level5InterruptVector.text +#endif +#if XCHAL_EXCM_LEVEL >= 6 + SECTION_VECTOR (_Level6InterruptVector_text, + .Level6InterruptVector.text, + INTLEVEL6_VECTOR_VADDR, + SIZEOF(LAST), LAST) +# undef LAST +# define LAST .Level6InterruptVector.text +#endif SECTION_VECTOR (_KernelExceptionVector_literal, .KernelExceptionVector.literal, - XCHAL_KERNEL_VECTOR_VADDR - 4, - SIZEOF(.DebugInterruptVector.text), - .DebugInterruptVector.text) + KERNEL_VECTOR_VADDR - 4, + SIZEOF(LAST), LAST) +#undef LAST SECTION_VECTOR (_KernelExceptionVector_text, .KernelExceptionVector.text, - XCHAL_KERNEL_VECTOR_VADDR, + KERNEL_VECTOR_VADDR, 4, .KernelExceptionVector.literal) SECTION_VECTOR (_UserExceptionVector_literal, .UserExceptionVector.literal, - XCHAL_USER_VECTOR_VADDR - 4, + USER_VECTOR_VADDR - 4, SIZEOF(.KernelExceptionVector.text), .KernelExceptionVector.text) SECTION_VECTOR (_UserExceptionVector_text, .UserExceptionVector.text, - XCHAL_USER_VECTOR_VADDR, + USER_VECTOR_VADDR, 4, .UserExceptionVector.literal) SECTION_VECTOR (_DoubleExceptionVector_literal, .DoubleExceptionVector.literal, - XCHAL_DOUBLEEXC_VECTOR_VADDR - 16, + DOUBLEEXC_VECTOR_VADDR - 16, SIZEOF(.UserExceptionVector.text), .UserExceptionVector.text) SECTION_VECTOR (_DoubleExceptionVector_text, .DoubleExceptionVector.text, - XCHAL_DOUBLEEXC_VECTOR_VADDR, + DOUBLEEXC_VECTOR_VADDR, 32, .DoubleExceptionVector.literal) @@ -222,11 +285,26 @@ SECTIONS . = ALIGN(0x10); .bootstrap : { *(.bootstrap.literal .bootstrap.text .bootstrap.data) } - .ResetVector.text XCHAL_RESET_VECTOR_VADDR : + .ResetVector.text RESET_VECTOR_VADDR : { *(.ResetVector.text) } + + /* + * This is a remapped copy of the Secondary Reset Vector Code. + * It keeps gdb in sync with the PC after switching + * to the temporary mapping used while setting up + * the V2 MMU mappings for Linux. + * + * Only debug information about this section is put in the kernel image. + */ + .SecondaryResetVector.remapped_text 0x46000000 (INFO): + { + *(.SecondaryResetVector.remapped_text) + } + + .xt.lit : { *(.xt.lit) } .xt.prop : { *(.xt.prop) } diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c index afe058b24e6..42c53c87c20 100644 --- a/arch/xtensa/kernel/xtensa_ksyms.c +++ b/arch/xtensa/kernel/xtensa_ksyms.c @@ -119,3 +119,8 @@ EXPORT_SYMBOL(outsl); EXPORT_SYMBOL(insb); EXPORT_SYMBOL(insw); EXPORT_SYMBOL(insl); + +extern long common_exception_return; +extern long _spill_registers; +EXPORT_SYMBOL(common_exception_return); +EXPORT_SYMBOL(_spill_registers); diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c index 7a5156ffebb..bba125b4bb0 100644 --- a/arch/xtensa/mm/init.c +++ b/arch/xtensa/mm/init.c @@ -208,32 +208,17 @@ void __init mem_init(void) highmemsize >> 10); } -void -free_reserved_mem(void *start, void *end) -{ - for (; start < end; start += PAGE_SIZE) { - ClearPageReserved(virt_to_page(start)); - init_page_count(virt_to_page(start)); - free_page((unsigned long)start); - totalram_pages++; - } -} - #ifdef CONFIG_BLK_DEV_INITRD extern int initrd_is_mapped; void free_initrd_mem(unsigned long start, unsigned long end) { - if (initrd_is_mapped) { - free_reserved_mem((void*)start, (void*)end); - printk ("Freeing initrd memory: %ldk freed\n",(end-start)>>10); - } + if (initrd_is_mapped) + free_reserved_area(start, end, 0, "initrd"); } #endif void free_initmem(void) { - free_reserved_mem(__init_begin, __init_end); - printk("Freeing unused kernel memory: %zuk freed\n", - (__init_end - __init_begin) >> 10); + free_initmem_default(0); } diff --git a/arch/xtensa/mm/mmu.c b/arch/xtensa/mm/mmu.c index 0f77f9d3bb8..a1077570e38 100644 --- a/arch/xtensa/mm/mmu.c +++ b/arch/xtensa/mm/mmu.c @@ -24,15 +24,19 @@ void __init paging_init(void) */ void __init init_mmu(void) { - /* Writing zeros to the <t>TLBCFG special registers ensure - * that valid values exist in the register. For existing - * PGSZID<w> fields, zero selects the first element of the - * page-size array. For nonexistent PGSZID<w> fields, zero is - * the best value to write. Also, when changing PGSZID<w> +#if !(XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY) + /* + * Writing zeros to the instruction and data TLBCFG special + * registers ensure that valid values exist in the register. + * + * For existing PGSZID<w> fields, zero selects the first element + * of the page-size array. For nonexistent PGSZID<w> fields, + * zero is the best value to write. Also, when changing PGSZID<w> * fields, the corresponding TLB must be flushed. */ set_itlbcfg_register(0); set_dtlbcfg_register(0); +#endif flush_tlb_all(); /* Set rasid register to a known value. */ diff --git a/arch/xtensa/oprofile/Makefile b/arch/xtensa/oprofile/Makefile new file mode 100644 index 00000000000..69ffbe80f18 --- /dev/null +++ b/arch/xtensa/oprofile/Makefile @@ -0,0 +1,9 @@ +obj-$(CONFIG_OPROFILE) += oprofile.o + +DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ + oprof.o cpu_buffer.o buffer_sync.o \ + event_buffer.o oprofile_files.o \ + oprofilefs.o oprofile_stats.o \ + timer_int.o ) + +oprofile-y := $(DRIVER_OBJS) init.o backtrace.o diff --git a/arch/xtensa/oprofile/backtrace.c b/arch/xtensa/oprofile/backtrace.c new file mode 100644 index 00000000000..5f03a593d84 --- /dev/null +++ b/arch/xtensa/oprofile/backtrace.c @@ -0,0 +1,169 @@ +/** + * @file backtrace.c + * + * @remark Copyright 2008 Tensilica Inc. + * @remark Read the file COPYING + * + */ + +#include <linux/oprofile.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <asm/ptrace.h> +#include <asm/uaccess.h> +#include <asm/traps.h> + +/* Address of common_exception_return, used to check the + * transition from kernel to user space. + */ +extern int common_exception_return; + +/* A struct that maps to the part of the frame containing the a0 and + * a1 registers. + */ +struct frame_start { + unsigned long a0; + unsigned long a1; +}; + +static void xtensa_backtrace_user(struct pt_regs *regs, unsigned int depth) +{ + unsigned long windowstart = regs->windowstart; + unsigned long windowbase = regs->windowbase; + unsigned long a0 = regs->areg[0]; + unsigned long a1 = regs->areg[1]; + unsigned long pc = MAKE_PC_FROM_RA(a0, regs->pc); + int index; + + /* First add the current PC to the trace. */ + if (pc != 0 && pc <= TASK_SIZE) + oprofile_add_trace(pc); + else + return; + + /* Two steps: + * + * 1. Look through the register window for the + * previous PCs in the call trace. + * + * 2. Look on the stack. + */ + + /* Step 1. */ + /* Rotate WINDOWSTART to move the bit corresponding to + * the current window to the bit #0. + */ + windowstart = (windowstart << WSBITS | windowstart) >> windowbase; + + /* Look for bits that are set, they correspond to + * valid windows. + */ + for (index = WSBITS - 1; (index > 0) && depth; depth--, index--) + if (windowstart & (1 << index)) { + /* Read a0 and a1 from the + * corresponding position in AREGs. + */ + a0 = regs->areg[index * 4]; + a1 = regs->areg[index * 4 + 1]; + /* Get the PC from a0 and a1. */ + pc = MAKE_PC_FROM_RA(a0, pc); + + /* Add the PC to the trace. */ + if (pc != 0 && pc <= TASK_SIZE) + oprofile_add_trace(pc); + else + return; + } + + /* Step 2. */ + /* We are done with the register window, we need to + * look through the stack. + */ + if (depth > 0) { + /* Start from the a1 register. */ + /* a1 = regs->areg[1]; */ + while (a0 != 0 && depth--) { + + struct frame_start frame_start; + /* Get the location for a1, a0 for the + * previous frame from the current a1. + */ + unsigned long *psp = (unsigned long *)a1; + psp -= 4; + + /* Check if the region is OK to access. */ + if (!access_ok(VERIFY_READ, psp, sizeof(frame_start))) + return; + /* Copy a1, a0 from user space stack frame. */ + if (__copy_from_user_inatomic(&frame_start, psp, + sizeof(frame_start))) + return; + + a0 = frame_start.a0; + a1 = frame_start.a1; + pc = MAKE_PC_FROM_RA(a0, pc); + + if (pc != 0 && pc <= TASK_SIZE) + oprofile_add_trace(pc); + else + return; + } + } +} + +static void xtensa_backtrace_kernel(struct pt_regs *regs, unsigned int depth) +{ + unsigned long pc = regs->pc; + unsigned long *psp; + unsigned long sp_start, sp_end; + unsigned long a0 = regs->areg[0]; + unsigned long a1 = regs->areg[1]; + + sp_start = a1 & ~(THREAD_SIZE-1); + sp_end = sp_start + THREAD_SIZE; + + /* Spill the register window to the stack first. */ + spill_registers(); + + /* Read the stack frames one by one and create the PC + * from the a0 and a1 registers saved there. + */ + while (a1 > sp_start && a1 < sp_end && depth--) { + pc = MAKE_PC_FROM_RA(a0, pc); + + /* Add the PC to the trace. */ + oprofile_add_trace(pc); + if (pc == (unsigned long) &common_exception_return) { + regs = (struct pt_regs *)a1; + if (user_mode(regs)) { + pc = regs->pc; + if (pc != 0 && pc <= TASK_SIZE) + oprofile_add_trace(pc); + else + return; + return xtensa_backtrace_user(regs, depth); + } + a0 = regs->areg[0]; + a1 = regs->areg[1]; + continue; + } + + psp = (unsigned long *)a1; + + a0 = *(psp - 4); + a1 = *(psp - 3); + + if (a1 <= (unsigned long)psp) + return; + + } + return; +} + +void xtensa_backtrace(struct pt_regs * const regs, unsigned int depth) +{ + if (user_mode(regs)) + xtensa_backtrace_user(regs, depth); + else + xtensa_backtrace_kernel(regs, depth); +} diff --git a/arch/xtensa/oprofile/init.c b/arch/xtensa/oprofile/init.c new file mode 100644 index 00000000000..a67eea37976 --- /dev/null +++ b/arch/xtensa/oprofile/init.c @@ -0,0 +1,26 @@ +/** + * @file init.c + * + * @remark Copyright 2008 Tensilica Inc. + * @remark Read the file COPYING + * + */ + +#include <linux/kernel.h> +#include <linux/oprofile.h> +#include <linux/errno.h> +#include <linux/init.h> + + +extern void xtensa_backtrace(struct pt_regs *const regs, unsigned int depth); + +int __init oprofile_arch_init(struct oprofile_operations *ops) +{ + ops->backtrace = xtensa_backtrace; + return -ENODEV; +} + + +void oprofile_arch_exit(void) +{ +} diff --git a/arch/xtensa/platforms/iss/Makefile b/arch/xtensa/platforms/iss/Makefile index b7d1a5c0ff7..d2369b799c5 100644 --- a/arch/xtensa/platforms/iss/Makefile +++ b/arch/xtensa/platforms/iss/Makefile @@ -6,3 +6,4 @@ obj-y = console.o setup.o obj-$(CONFIG_NET) += network.o +obj-$(CONFIG_BLK_DEV_SIMDISK) += simdisk.o diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c index 8207a119eee..70cb408bc20 100644 --- a/arch/xtensa/platforms/iss/console.c +++ b/arch/xtensa/platforms/iss/console.c @@ -56,12 +56,13 @@ static void rs_poll(unsigned long); static int rs_open(struct tty_struct *tty, struct file * filp) { tty->port = &serial_port; - spin_lock(&timer_lock); + spin_lock_bh(&timer_lock); if (tty->count == 1) { - setup_timer(&serial_timer, rs_poll, (unsigned long)tty); + setup_timer(&serial_timer, rs_poll, + (unsigned long)&serial_port); mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE); } - spin_unlock(&timer_lock); + spin_unlock_bh(&timer_lock); return 0; } @@ -97,22 +98,20 @@ static int rs_write(struct tty_struct * tty, static void rs_poll(unsigned long priv) { - struct tty_struct* tty = (struct tty_struct*) priv; - - struct timeval tv = { .tv_sec = 0, .tv_usec = 0 }; + struct tty_port *port = (struct tty_port *)priv; int i = 0; unsigned char c; spin_lock(&timer_lock); - while (__simc(SYS_select_one, 0, XTISS_SELECT_ONE_READ, (int)&tv,0,0)){ - __simc (SYS_read, 0, (unsigned long)&c, 1, 0, 0); - tty_insert_flip_char(tty, c, TTY_NORMAL); + while (simc_poll(0)) { + simc_read(0, &c, 1); + tty_insert_flip_char(port, c, TTY_NORMAL); i++; } if (i) - tty_flip_buffer_push(tty); + tty_flip_buffer_push(port); mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE); @@ -244,8 +243,7 @@ static void iss_console_write(struct console *co, const char *s, unsigned count) int len = strlen(s); if (s != 0 && *s != 0) - __simc (SYS_write, 1, (unsigned long)s, - count < len ? count : len,0,0); + simc_write(1, s, count < len ? count : len); } static struct tty_driver* iss_console_device(struct console *c, int *index) diff --git a/arch/xtensa/platforms/iss/include/platform/simcall.h b/arch/xtensa/platforms/iss/include/platform/simcall.h index b5a4edf02d7..12b15ad1e58 100644 --- a/arch/xtensa/platforms/iss/include/platform/simcall.h +++ b/arch/xtensa/platforms/iss/include/platform/simcall.h @@ -59,56 +59,58 @@ static int errno; -static inline int __simc(int a, int b, int c, int d, int e, int f) +static inline int __simc(int a, int b, int c, int d) { int ret; register int a1 asm("a2") = a; register int b1 asm("a3") = b; register int c1 asm("a4") = c; register int d1 asm("a5") = d; - register int e1 asm("a6") = e; - register int f1 asm("a7") = f; __asm__ __volatile__ ( "simcall\n" "mov %0, a2\n" "mov %1, a3\n" : "=a" (ret), "=a" (errno), "+r"(a1), "+r"(b1) - : "r"(c1), "r"(d1), "r"(e1), "r"(f1) + : "r"(c1), "r"(d1) : "memory"); return ret; } static inline int simc_open(const char *file, int flags, int mode) { - return __simc(SYS_open, (int) file, flags, mode, 0, 0); + return __simc(SYS_open, (int) file, flags, mode); } static inline int simc_close(int fd) { - return __simc(SYS_close, fd, 0, 0, 0, 0); + return __simc(SYS_close, fd, 0, 0); } static inline int simc_ioctl(int fd, int request, void *arg) { - return __simc(SYS_ioctl, fd, request, (int) arg, 0, 0); + return __simc(SYS_ioctl, fd, request, (int) arg); } static inline int simc_read(int fd, void *buf, size_t count) { - return __simc(SYS_read, fd, (int) buf, count, 0, 0); + return __simc(SYS_read, fd, (int) buf, count); } static inline int simc_write(int fd, const void *buf, size_t count) { - return __simc(SYS_write, fd, (int) buf, count, 0, 0); + return __simc(SYS_write, fd, (int) buf, count); } static inline int simc_poll(int fd) { struct timeval tv = { .tv_sec = 0, .tv_usec = 0 }; - return __simc(SYS_select_one, fd, XTISS_SELECT_ONE_READ, (int)&tv, - 0, 0); + return __simc(SYS_select_one, fd, XTISS_SELECT_ONE_READ, (int)&tv); +} + +static inline int simc_lseek(int fd, uint32_t off, int whence) +{ + return __simc(SYS_lseek, fd, off, whence); } #endif /* _XTENSA_PLATFORM_ISS_SIMCALL_H */ diff --git a/arch/xtensa/platforms/iss/setup.c b/arch/xtensa/platforms/iss/setup.c index e1700102f35..da7d1824086 100644 --- a/arch/xtensa/platforms/iss/setup.c +++ b/arch/xtensa/platforms/iss/setup.c @@ -38,12 +38,6 @@ void __init platform_init(bp_tag_t* bootparam) } -#ifdef CONFIG_PCI -void platform_pcibios_init(void) -{ -} -#endif - void platform_halt(void) { pr_info(" ** Called platform_halt() **\n"); @@ -64,7 +58,9 @@ void platform_restart(void) "wsr a2, icountlevel\n\t" "movi a2, 0\n\t" "wsr a2, icount\n\t" +#if XCHAL_NUM_IBREAK > 0 "wsr a2, ibreakenable\n\t" +#endif "wsr a2, lcount\n\t" "movi a2, 0x1f\n\t" "wsr a2, ps\n\t" diff --git a/arch/xtensa/platforms/iss/simdisk.c b/arch/xtensa/platforms/iss/simdisk.c new file mode 100644 index 00000000000..c0edb35424c --- /dev/null +++ b/arch/xtensa/platforms/iss/simdisk.c @@ -0,0 +1,384 @@ +/* + * arch/xtensa/platforms/iss/simdisk.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001-2013 Tensilica Inc. + * Authors Victor Prupis + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/blkdev.h> +#include <linux/bio.h> +#include <linux/proc_fs.h> +#include <asm/uaccess.h> +#include <platform/simcall.h> + +#define SIMDISK_MAJOR 240 +#define SECTOR_SHIFT 9 +#define SIMDISK_MINORS 1 +#define MAX_SIMDISK_COUNT 10 + +struct simdisk { + const char *filename; + spinlock_t lock; + struct request_queue *queue; + struct gendisk *gd; + struct proc_dir_entry *procfile; + int users; + unsigned long size; + int fd; +}; + + +static int simdisk_count = CONFIG_BLK_DEV_SIMDISK_COUNT; +module_param(simdisk_count, int, S_IRUGO); +MODULE_PARM_DESC(simdisk_count, "Number of simdisk units."); + +static int n_files; +static const char *filename[MAX_SIMDISK_COUNT] = { +#ifdef CONFIG_SIMDISK0_FILENAME + CONFIG_SIMDISK0_FILENAME, +#ifdef CONFIG_SIMDISK1_FILENAME + CONFIG_SIMDISK1_FILENAME, +#endif +#endif +}; + +static int simdisk_param_set_filename(const char *val, + const struct kernel_param *kp) +{ + if (n_files < ARRAY_SIZE(filename)) + filename[n_files++] = val; + else + return -EINVAL; + return 0; +} + +static const struct kernel_param_ops simdisk_param_ops_filename = { + .set = simdisk_param_set_filename, +}; +module_param_cb(filename, &simdisk_param_ops_filename, &n_files, 0); +MODULE_PARM_DESC(filename, "Backing storage filename."); + +static int simdisk_major = SIMDISK_MAJOR; + +static void simdisk_transfer(struct simdisk *dev, unsigned long sector, + unsigned long nsect, char *buffer, int write) +{ + unsigned long offset = sector << SECTOR_SHIFT; + unsigned long nbytes = nsect << SECTOR_SHIFT; + + if (offset > dev->size || dev->size - offset < nbytes) { + pr_notice("Beyond-end %s (%ld %ld)\n", + write ? "write" : "read", offset, nbytes); + return; + } + + spin_lock(&dev->lock); + while (nbytes > 0) { + unsigned long io; + + simc_lseek(dev->fd, offset, SEEK_SET); + if (write) + io = simc_write(dev->fd, buffer, nbytes); + else + io = simc_read(dev->fd, buffer, nbytes); + if (io == -1) { + pr_err("SIMDISK: IO error %d\n", errno); + break; + } + buffer += io; + offset += io; + nbytes -= io; + } + spin_unlock(&dev->lock); +} + +static int simdisk_xfer_bio(struct simdisk *dev, struct bio *bio) +{ + int i; + struct bio_vec *bvec; + sector_t sector = bio->bi_sector; + + bio_for_each_segment(bvec, bio, i) { + char *buffer = __bio_kmap_atomic(bio, i, KM_USER0); + unsigned len = bvec->bv_len >> SECTOR_SHIFT; + + simdisk_transfer(dev, sector, len, buffer, + bio_data_dir(bio) == WRITE); + sector += len; + __bio_kunmap_atomic(bio, KM_USER0); + } + return 0; +} + +static void simdisk_make_request(struct request_queue *q, struct bio *bio) +{ + struct simdisk *dev = q->queuedata; + int status = simdisk_xfer_bio(dev, bio); + bio_endio(bio, status); +} + + +static int simdisk_open(struct block_device *bdev, fmode_t mode) +{ + struct simdisk *dev = bdev->bd_disk->private_data; + + spin_lock(&dev->lock); + if (!dev->users) + check_disk_change(bdev); + ++dev->users; + spin_unlock(&dev->lock); + return 0; +} + +static void simdisk_release(struct gendisk *disk, fmode_t mode) +{ + struct simdisk *dev = disk->private_data; + spin_lock(&dev->lock); + --dev->users; + spin_unlock(&dev->lock); +} + +static const struct block_device_operations simdisk_ops = { + .owner = THIS_MODULE, + .open = simdisk_open, + .release = simdisk_release, +}; + +static struct simdisk *sddev; +static struct proc_dir_entry *simdisk_procdir; + +static int simdisk_attach(struct simdisk *dev, const char *filename) +{ + int err = 0; + + filename = kstrdup(filename, GFP_KERNEL); + if (filename == NULL) + return -ENOMEM; + + spin_lock(&dev->lock); + + if (dev->fd != -1) { + err = -EBUSY; + goto out; + } + dev->fd = simc_open(filename, O_RDWR, 0); + if (dev->fd == -1) { + pr_err("SIMDISK: Can't open %s: %d\n", filename, errno); + err = -ENODEV; + goto out; + } + dev->size = simc_lseek(dev->fd, 0, SEEK_END); + set_capacity(dev->gd, dev->size >> SECTOR_SHIFT); + dev->filename = filename; + pr_info("SIMDISK: %s=%s\n", dev->gd->disk_name, dev->filename); +out: + if (err) + kfree(filename); + spin_unlock(&dev->lock); + + return err; +} + +static int simdisk_detach(struct simdisk *dev) +{ + int err = 0; + + spin_lock(&dev->lock); + + if (dev->users != 0) { + err = -EBUSY; + } else if (dev->fd != -1) { + if (simc_close(dev->fd)) { + pr_err("SIMDISK: error closing %s: %d\n", + dev->filename, errno); + err = -EIO; + } else { + pr_info("SIMDISK: %s detached from %s\n", + dev->gd->disk_name, dev->filename); + dev->fd = -1; + kfree(dev->filename); + dev->filename = NULL; + } + } + spin_unlock(&dev->lock); + return err; +} + +static ssize_t proc_read_simdisk(struct file *file, char __user *buf, + size_t size, loff_t *ppos) +{ + struct simdisk *dev = PDE_DATA(file_inode(file)); + const char *s = dev->filename; + if (s) { + ssize_t n = simple_read_from_buffer(buf, size, ppos, + s, strlen(s)); + if (n < 0) + return n; + buf += n; + size -= n; + } + return simple_read_from_buffer(buf, size, ppos, "\n", 1); +} + +static ssize_t proc_write_simdisk(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + char *tmp = kmalloc(count + 1, GFP_KERNEL); + struct simdisk *dev = PDE_DATA(file_inode(file)); + int err; + + if (tmp == NULL) + return -ENOMEM; + if (copy_from_user(tmp, buf, count)) { + err = -EFAULT; + goto out_free; + } + + err = simdisk_detach(dev); + if (err != 0) + goto out_free; + + if (count > 0 && tmp[count - 1] == '\n') + tmp[count - 1] = 0; + else + tmp[count] = 0; + + if (tmp[0]) + err = simdisk_attach(dev, tmp); + + if (err == 0) + err = count; +out_free: + kfree(tmp); + return err; +} + +static const struct file_operations fops = { + .read = proc_read_simdisk, + .write = proc_write_simdisk, + .llseek = default_llseek, +}; + +static int __init simdisk_setup(struct simdisk *dev, int which, + struct proc_dir_entry *procdir) +{ + char tmp[2] = { '0' + which, 0 }; + + dev->fd = -1; + dev->filename = NULL; + spin_lock_init(&dev->lock); + dev->users = 0; + + dev->queue = blk_alloc_queue(GFP_KERNEL); + if (dev->queue == NULL) { + pr_err("blk_alloc_queue failed\n"); + goto out_alloc_queue; + } + + blk_queue_make_request(dev->queue, simdisk_make_request); + dev->queue->queuedata = dev; + + dev->gd = alloc_disk(SIMDISK_MINORS); + if (dev->gd == NULL) { + pr_err("alloc_disk failed\n"); + goto out_alloc_disk; + } + dev->gd->major = simdisk_major; + dev->gd->first_minor = which; + dev->gd->fops = &simdisk_ops; + dev->gd->queue = dev->queue; + dev->gd->private_data = dev; + snprintf(dev->gd->disk_name, 32, "simdisk%d", which); + set_capacity(dev->gd, 0); + add_disk(dev->gd); + + dev->procfile = proc_create_data(tmp, 0644, procdir, &fops, dev); + return 0; + +out_alloc_disk: + blk_cleanup_queue(dev->queue); + dev->queue = NULL; +out_alloc_queue: + simc_close(dev->fd); + return -EIO; +} + +static int __init simdisk_init(void) +{ + int i; + + if (register_blkdev(simdisk_major, "simdisk") < 0) { + pr_err("SIMDISK: register_blkdev: %d\n", simdisk_major); + return -EIO; + } + pr_info("SIMDISK: major: %d\n", simdisk_major); + + if (n_files > simdisk_count) + simdisk_count = n_files; + if (simdisk_count > MAX_SIMDISK_COUNT) + simdisk_count = MAX_SIMDISK_COUNT; + + sddev = kmalloc(simdisk_count * sizeof(struct simdisk), + GFP_KERNEL); + if (sddev == NULL) + goto out_unregister; + + simdisk_procdir = proc_mkdir("simdisk", 0); + if (simdisk_procdir == NULL) + goto out_free_unregister; + + for (i = 0; i < simdisk_count; ++i) { + if (simdisk_setup(sddev + i, i, simdisk_procdir) == 0) { + if (filename[i] != NULL && filename[i][0] != 0 && + (n_files == 0 || i < n_files)) + simdisk_attach(sddev + i, filename[i]); + } + } + + return 0; + +out_free_unregister: + kfree(sddev); +out_unregister: + unregister_blkdev(simdisk_major, "simdisk"); + return -ENOMEM; +} +module_init(simdisk_init); + +static void simdisk_teardown(struct simdisk *dev, int which, + struct proc_dir_entry *procdir) +{ + char tmp[2] = { '0' + which, 0 }; + + simdisk_detach(dev); + if (dev->gd) + del_gendisk(dev->gd); + if (dev->queue) + blk_cleanup_queue(dev->queue); + remove_proc_entry(tmp, procdir); +} + +static void __exit simdisk_exit(void) +{ + int i; + + for (i = 0; i < simdisk_count; ++i) + simdisk_teardown(sddev + i, i, simdisk_procdir); + remove_proc_entry("simdisk", 0); + kfree(sddev); + unregister_blkdev(simdisk_major, "simdisk"); +} +module_exit(simdisk_exit); + +MODULE_ALIAS_BLOCKDEV_MAJOR(SIMDISK_MAJOR); + +MODULE_LICENSE("GPL"); diff --git a/arch/xtensa/platforms/xt2000/setup.c b/arch/xtensa/platforms/xt2000/setup.c index c7d90f17886..f9bc8796629 100644 --- a/arch/xtensa/platforms/xt2000/setup.c +++ b/arch/xtensa/platforms/xt2000/setup.c @@ -69,7 +69,9 @@ void platform_restart(void) "wsr a2, icountlevel\n\t" "movi a2, 0\n\t" "wsr a2, icount\n\t" +#if XCHAL_NUM_IBREAK > 0 "wsr a2, ibreakenable\n\t" +#endif "wsr a2, lcount\n\t" "movi a2, 0x1f\n\t" "wsr a2, ps\n\t" diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c index 4b9951a4569..96ef8eeb064 100644 --- a/arch/xtensa/platforms/xtfpga/setup.c +++ b/arch/xtensa/platforms/xtfpga/setup.c @@ -60,7 +60,9 @@ void platform_restart(void) "wsr a2, icountlevel\n\t" "movi a2, 0\n\t" "wsr a2, icount\n\t" +#if XCHAL_NUM_IBREAK > 0 "wsr a2, ibreakenable\n\t" +#endif "wsr a2, lcount\n\t" "movi a2, 0x1f\n\t" "wsr a2, ps\n\t" @@ -100,7 +102,7 @@ static void __init update_clock_frequency(struct device_node *node) } *(u32 *)newfreq->value = cpu_to_be32(*(u32 *)XTFPGA_CLKFRQ_VADDR); - prom_update_property(node, newfreq); + of_update_property(node, newfreq); } #define MAC_LEN 6 @@ -128,7 +130,7 @@ static void __init update_local_mac(struct device_node *node) memcpy(newmac->value, macaddr, MAC_LEN); ((u8*)newmac->value)[5] = (*(u32*)DIP_SWITCHES_VADDR) & 0x3f; - prom_update_property(node, newmac); + of_update_property(node, newmac); } static int __init machine_setup(void) diff --git a/arch/xtensa/variants/dc233c/include/variant/core.h b/arch/xtensa/variants/dc233c/include/variant/core.h new file mode 100644 index 00000000000..3a2e53b9493 --- /dev/null +++ b/arch/xtensa/variants/dc233c/include/variant/core.h @@ -0,0 +1,475 @@ +/* + * xtensa/config/core-isa.h -- HAL definitions that are dependent on Xtensa + * processor CORE configuration + * + * See <xtensa/config/core.h>, which includes this file, for more details. + */ + +/* Xtensa processor core configuration information. + + Copyright (c) 1999-2010 Tensilica Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef _XTENSA_CORE_CONFIGURATION_H +#define _XTENSA_CORE_CONFIGURATION_H + + +/**************************************************************************** + Parameters Useful for Any Code, USER or PRIVILEGED + ****************************************************************************/ + +/* + * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is + * configured, and a value of 0 otherwise. These macros are always defined. + */ + + +/*---------------------------------------------------------------------- + ISA + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_BE 0 /* big-endian byte ordering */ +#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */ +#define XCHAL_NUM_AREGS 32 /* num of physical addr regs */ +#define XCHAL_NUM_AREGS_LOG2 5 /* log2(XCHAL_NUM_AREGS) */ +#define XCHAL_MAX_INSTRUCTION_SIZE 3 /* max instr bytes (3..8) */ +#define XCHAL_HAVE_DEBUG 1 /* debug option */ +#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */ +#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */ +#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */ +#define XCHAL_HAVE_MINMAX 1 /* MIN/MAX instructions */ +#define XCHAL_HAVE_SEXT 1 /* SEXT instruction */ +#define XCHAL_HAVE_CLAMPS 1 /* CLAMPS instruction */ +#define XCHAL_HAVE_MUL16 1 /* MUL16S/MUL16U instructions */ +#define XCHAL_HAVE_MUL32 1 /* MULL instruction */ +#define XCHAL_HAVE_MUL32_HIGH 0 /* MULUH/MULSH instructions */ +#define XCHAL_HAVE_DIV32 1 /* QUOS/QUOU/REMS/REMU instructions */ +#define XCHAL_HAVE_L32R 1 /* L32R instruction */ +#define XCHAL_HAVE_ABSOLUTE_LITERALS 1 /* non-PC-rel (extended) L32R */ +#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */ +#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */ +#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */ +#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */ +#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */ +#define XCHAL_HAVE_ABS 1 /* ABS instruction */ +/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */ +/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */ +#define XCHAL_HAVE_RELEASE_SYNC 1 /* L32AI/S32RI instructions */ +#define XCHAL_HAVE_S32C1I 1 /* S32C1I instruction */ +#define XCHAL_HAVE_SPECULATION 0 /* speculation */ +#define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */ +#define XCHAL_NUM_CONTEXTS 1 /* */ +#define XCHAL_NUM_MISC_REGS 2 /* num of scratch regs (0..4) */ +#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */ +#define XCHAL_HAVE_PRID 1 /* processor ID register */ +#define XCHAL_HAVE_EXTERN_REGS 1 /* WER/RER instructions */ +#define XCHAL_HAVE_MP_INTERRUPTS 0 /* interrupt distributor port */ +#define XCHAL_HAVE_MP_RUNSTALL 0 /* core RunStall control port */ +#define XCHAL_HAVE_THREADPTR 1 /* THREADPTR register */ +#define XCHAL_HAVE_BOOLEANS 0 /* boolean registers */ +#define XCHAL_HAVE_CP 1 /* CPENABLE reg (coprocessor) */ +#define XCHAL_CP_MAXCFG 8 /* max allowed cp id plus one */ +#define XCHAL_HAVE_MAC16 1 /* MAC16 package */ +#define XCHAL_HAVE_VECTORFPU2005 0 /* vector floating-point pkg */ +#define XCHAL_HAVE_FP 0 /* floating point pkg */ +#define XCHAL_HAVE_DFP 0 /* double precision FP pkg */ +#define XCHAL_HAVE_DFP_accel 0 /* double precision FP acceleration pkg */ +#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */ +#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */ +#define XCHAL_HAVE_HIFIPRO 0 /* HiFiPro Audio Engine pkg */ +#define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */ +#define XCHAL_HAVE_HIFI2EP 0 /* HiFi2EP */ +#define XCHAL_HAVE_CONNXD2 0 /* ConnX D2 pkg */ +#define XCHAL_HAVE_BBE16 0 /* ConnX BBE16 pkg */ +#define XCHAL_HAVE_BBE16_RSQRT 0 /* BBE16 & vector recip sqrt */ +#define XCHAL_HAVE_BBE16_VECDIV 0 /* BBE16 & vector divide */ +#define XCHAL_HAVE_BBE16_DESPREAD 0 /* BBE16 & despread */ +#define XCHAL_HAVE_BSP3 0 /* ConnX BSP3 pkg */ +#define XCHAL_HAVE_SSP16 0 /* ConnX SSP16 pkg */ +#define XCHAL_HAVE_SSP16_VITERBI 0 /* SSP16 & viterbi */ +#define XCHAL_HAVE_TURBO16 0 /* ConnX Turbo16 pkg */ +#define XCHAL_HAVE_BBP16 0 /* ConnX BBP16 pkg */ + + +/*---------------------------------------------------------------------- + MISC + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_WRITEBUFFER_ENTRIES 8 /* size of write buffer */ +#define XCHAL_INST_FETCH_WIDTH 4 /* instr-fetch width in bytes */ +#define XCHAL_DATA_WIDTH 4 /* data width in bytes */ +/* In T1050, applies to selected core load and store instructions (see ISA): */ +#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* unaligned loads cause exc. */ +#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* unaligned stores cause exc.*/ +#define XCHAL_UNALIGNED_LOAD_HW 0 /* unaligned loads work in hw */ +#define XCHAL_UNALIGNED_STORE_HW 0 /* unaligned stores work in hw*/ + +#define XCHAL_SW_VERSION 900001 /* sw version of this header */ + +#define XCHAL_CORE_ID "dc233c" /* alphanum core name + (CoreID) set in the Xtensa + Processor Generator */ + +#define XCHAL_CORE_DESCRIPTION "dc233c" +#define XCHAL_BUILD_UNIQUE_ID 0x00004B21 /* 22-bit sw build ID */ + +/* + * These definitions describe the hardware targeted by this software. + */ +#define XCHAL_HW_CONFIGID0 0xC56707FE /* ConfigID hi 32 bits*/ +#define XCHAL_HW_CONFIGID1 0x14404B21 /* ConfigID lo 32 bits*/ +#define XCHAL_HW_VERSION_NAME "LX4.0.1" /* full version name */ +#define XCHAL_HW_VERSION_MAJOR 2400 /* major ver# of targeted hw */ +#define XCHAL_HW_VERSION_MINOR 1 /* minor ver# of targeted hw */ +#define XCHAL_HW_VERSION 240001 /* major*100+minor */ +#define XCHAL_HW_REL_LX4 1 +#define XCHAL_HW_REL_LX4_0 1 +#define XCHAL_HW_REL_LX4_0_1 1 +#define XCHAL_HW_CONFIGID_RELIABLE 1 +/* If software targets a *range* of hardware versions, these are the bounds: */ +#define XCHAL_HW_MIN_VERSION_MAJOR 2400 /* major v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION_MINOR 1 /* minor v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION 240001 /* earliest targeted hw */ +#define XCHAL_HW_MAX_VERSION_MAJOR 2400 /* major v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION_MINOR 1 /* minor v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION 240001 /* latest targeted hw */ + + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_ICACHE_LINESIZE 32 /* I-cache line size in bytes */ +#define XCHAL_DCACHE_LINESIZE 32 /* D-cache line size in bytes */ +#define XCHAL_ICACHE_LINEWIDTH 5 /* log2(I line size in bytes) */ +#define XCHAL_DCACHE_LINEWIDTH 5 /* log2(D line size in bytes) */ + +#define XCHAL_ICACHE_SIZE 16384 /* I-cache size in bytes or 0 */ +#define XCHAL_DCACHE_SIZE 16384 /* D-cache size in bytes or 0 */ + +#define XCHAL_DCACHE_IS_WRITEBACK 1 /* writeback feature */ +#define XCHAL_DCACHE_IS_COHERENT 0 /* MP coherence feature */ + +#define XCHAL_HAVE_PREFETCH 0 /* PREFCTL register */ + + + + +/**************************************************************************** + Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code + ****************************************************************************/ + + +#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_PIF 1 /* any outbound PIF present */ + +/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */ + +/* Number of cache sets in log2(lines per way): */ +#define XCHAL_ICACHE_SETWIDTH 7 +#define XCHAL_DCACHE_SETWIDTH 7 + +/* Cache set associativity (number of ways): */ +#define XCHAL_ICACHE_WAYS 4 +#define XCHAL_DCACHE_WAYS 4 + +/* Cache features: */ +#define XCHAL_ICACHE_LINE_LOCKABLE 1 +#define XCHAL_DCACHE_LINE_LOCKABLE 1 +#define XCHAL_ICACHE_ECC_PARITY 0 +#define XCHAL_DCACHE_ECC_PARITY 0 + +/* Cache access size in bytes (affects operation of SICW instruction): */ +#define XCHAL_ICACHE_ACCESS_SIZE 4 +#define XCHAL_DCACHE_ACCESS_SIZE 4 + +/* Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits): */ +#define XCHAL_CA_BITS 4 + + +/*---------------------------------------------------------------------- + INTERNAL I/D RAM/ROMs and XLMI + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */ +#define XCHAL_NUM_INSTRAM 0 /* number of core instr. RAMs */ +#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */ +#define XCHAL_NUM_DATARAM 0 /* number of core data RAMs */ +#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/ +#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports */ + +#define XCHAL_HAVE_IMEM_LOADSTORE 1 /* can load/store to IROM/IRAM*/ + + +/*---------------------------------------------------------------------- + INTERRUPTS and TIMERS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */ +#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */ +#define XCHAL_HAVE_NMI 1 /* non-maskable interrupt */ +#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */ +#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ +#define XCHAL_NUM_INTERRUPTS 22 /* number of interrupts */ +#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */ +#define XCHAL_NUM_EXTINTERRUPTS 17 /* num of external interrupts */ +#define XCHAL_NUM_INTLEVELS 6 /* number of interrupt levels + (not including level zero) */ +#define XCHAL_EXCM_LEVEL 3 /* level masked by PS.EXCM */ + /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */ + +/* Masks of interrupts at each interrupt level: */ +#define XCHAL_INTLEVEL1_MASK 0x001F80FF +#define XCHAL_INTLEVEL2_MASK 0x00000100 +#define XCHAL_INTLEVEL3_MASK 0x00200E00 +#define XCHAL_INTLEVEL4_MASK 0x00001000 +#define XCHAL_INTLEVEL5_MASK 0x00002000 +#define XCHAL_INTLEVEL6_MASK 0x00000000 +#define XCHAL_INTLEVEL7_MASK 0x00004000 + +/* Masks of interrupts at each range 1..n of interrupt levels: */ +#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x001F80FF +#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x001F81FF +#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x003F8FFF +#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x003F9FFF +#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x003FBFFF +#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x003FBFFF +#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x003FFFFF + +/* Level of each interrupt: */ +#define XCHAL_INT0_LEVEL 1 +#define XCHAL_INT1_LEVEL 1 +#define XCHAL_INT2_LEVEL 1 +#define XCHAL_INT3_LEVEL 1 +#define XCHAL_INT4_LEVEL 1 +#define XCHAL_INT5_LEVEL 1 +#define XCHAL_INT6_LEVEL 1 +#define XCHAL_INT7_LEVEL 1 +#define XCHAL_INT8_LEVEL 2 +#define XCHAL_INT9_LEVEL 3 +#define XCHAL_INT10_LEVEL 3 +#define XCHAL_INT11_LEVEL 3 +#define XCHAL_INT12_LEVEL 4 +#define XCHAL_INT13_LEVEL 5 +#define XCHAL_INT14_LEVEL 7 +#define XCHAL_INT15_LEVEL 1 +#define XCHAL_INT16_LEVEL 1 +#define XCHAL_INT17_LEVEL 1 +#define XCHAL_INT18_LEVEL 1 +#define XCHAL_INT19_LEVEL 1 +#define XCHAL_INT20_LEVEL 1 +#define XCHAL_INT21_LEVEL 3 +#define XCHAL_DEBUGLEVEL 6 /* debug interrupt level */ +#define XCHAL_HAVE_DEBUG_EXTERN_INT 1 /* OCD external db interrupt */ +#define XCHAL_NMILEVEL 7 /* NMI "level" (for use with + EXCSAVE/EPS/EPC_n, RFI n) */ + +/* Type of each interrupt: */ +#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT6_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT7_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT11_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT12_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT13_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT14_TYPE XTHAL_INTTYPE_NMI +#define XCHAL_INT15_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT16_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT17_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT18_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT19_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT20_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT21_TYPE XTHAL_INTTYPE_EXTERN_EDGE + +/* Masks of interrupts for each type of interrupt: */ +#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFC00000 +#define XCHAL_INTTYPE_MASK_SOFTWARE 0x00000880 +#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x003F8000 +#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000133F +#define XCHAL_INTTYPE_MASK_TIMER 0x00002440 +#define XCHAL_INTTYPE_MASK_NMI 0x00004000 +#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000 + +/* Interrupt numbers assigned to specific interrupt sources: */ +#define XCHAL_TIMER0_INTERRUPT 6 /* CCOMPARE0 */ +#define XCHAL_TIMER1_INTERRUPT 10 /* CCOMPARE1 */ +#define XCHAL_TIMER2_INTERRUPT 13 /* CCOMPARE2 */ +#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED +#define XCHAL_NMI_INTERRUPT 14 /* non-maskable interrupt */ + +/* Interrupt numbers for levels at which only one interrupt is configured: */ +#define XCHAL_INTLEVEL2_NUM 8 +#define XCHAL_INTLEVEL4_NUM 12 +#define XCHAL_INTLEVEL5_NUM 13 +#define XCHAL_INTLEVEL7_NUM 14 +/* (There are many interrupts each at level(s) 1, 3.) */ + + +/* + * External interrupt vectors/levels. + * These macros describe how Xtensa processor interrupt numbers + * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) + * map to external BInterrupt<n> pins, for those interrupts + * configured as external (level-triggered, edge-triggered, or NMI). + * See the Xtensa processor databook for more details. + */ + +/* Core interrupt numbers mapped to each EXTERNAL interrupt number: */ +#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ +#define XCHAL_EXTINT1_NUM 1 /* (intlevel 1) */ +#define XCHAL_EXTINT2_NUM 2 /* (intlevel 1) */ +#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ +#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ +#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ +#define XCHAL_EXTINT6_NUM 8 /* (intlevel 2) */ +#define XCHAL_EXTINT7_NUM 9 /* (intlevel 3) */ +#define XCHAL_EXTINT8_NUM 12 /* (intlevel 4) */ +#define XCHAL_EXTINT9_NUM 14 /* (intlevel 7) */ +#define XCHAL_EXTINT10_NUM 15 /* (intlevel 1) */ +#define XCHAL_EXTINT11_NUM 16 /* (intlevel 1) */ +#define XCHAL_EXTINT12_NUM 17 /* (intlevel 1) */ +#define XCHAL_EXTINT13_NUM 18 /* (intlevel 1) */ +#define XCHAL_EXTINT14_NUM 19 /* (intlevel 1) */ +#define XCHAL_EXTINT15_NUM 20 /* (intlevel 1) */ +#define XCHAL_EXTINT16_NUM 21 /* (intlevel 3) */ + + +/*---------------------------------------------------------------------- + EXCEPTIONS and VECTORS + ----------------------------------------------------------------------*/ + +#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture + number: 1 == XEA1 (old) + 2 == XEA2 (new) + 0 == XEAX (extern) or TX */ +#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */ +#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */ +#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */ +#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */ +#define XCHAL_HAVE_HALT 0 /* halt architecture option */ +#define XCHAL_HAVE_BOOTLOADER 0 /* boot loader (for TX) */ +#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */ +#define XCHAL_HAVE_VECTOR_SELECT 1 /* relocatable vectors */ +#define XCHAL_HAVE_VECBASE 1 /* relocatable vectors */ +#define XCHAL_VECBASE_RESET_VADDR 0x00002000 /* VECBASE reset value */ +#define XCHAL_VECBASE_RESET_PADDR 0x00002000 +#define XCHAL_RESET_VECBASE_OVERLAP 0 + +#define XCHAL_RESET_VECTOR0_VADDR 0xFE000000 +#define XCHAL_RESET_VECTOR0_PADDR 0xFE000000 +#define XCHAL_RESET_VECTOR1_VADDR 0x00001000 +#define XCHAL_RESET_VECTOR1_PADDR 0x00001000 +#define XCHAL_RESET_VECTOR_VADDR 0xFE000000 +#define XCHAL_RESET_VECTOR_PADDR 0xFE000000 +#define XCHAL_USER_VECOFS 0x00000340 +#define XCHAL_USER_VECTOR_VADDR 0x00002340 +#define XCHAL_USER_VECTOR_PADDR 0x00002340 +#define XCHAL_KERNEL_VECOFS 0x00000300 +#define XCHAL_KERNEL_VECTOR_VADDR 0x00002300 +#define XCHAL_KERNEL_VECTOR_PADDR 0x00002300 +#define XCHAL_DOUBLEEXC_VECOFS 0x000003C0 +#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0x000023C0 +#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x000023C0 +#define XCHAL_WINDOW_OF4_VECOFS 0x00000000 +#define XCHAL_WINDOW_UF4_VECOFS 0x00000040 +#define XCHAL_WINDOW_OF8_VECOFS 0x00000080 +#define XCHAL_WINDOW_UF8_VECOFS 0x000000C0 +#define XCHAL_WINDOW_OF12_VECOFS 0x00000100 +#define XCHAL_WINDOW_UF12_VECOFS 0x00000140 +#define XCHAL_WINDOW_VECTORS_VADDR 0x00002000 +#define XCHAL_WINDOW_VECTORS_PADDR 0x00002000 +#define XCHAL_INTLEVEL2_VECOFS 0x00000180 +#define XCHAL_INTLEVEL2_VECTOR_VADDR 0x00002180 +#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x00002180 +#define XCHAL_INTLEVEL3_VECOFS 0x000001C0 +#define XCHAL_INTLEVEL3_VECTOR_VADDR 0x000021C0 +#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x000021C0 +#define XCHAL_INTLEVEL4_VECOFS 0x00000200 +#define XCHAL_INTLEVEL4_VECTOR_VADDR 0x00002200 +#define XCHAL_INTLEVEL4_VECTOR_PADDR 0x00002200 +#define XCHAL_INTLEVEL5_VECOFS 0x00000240 +#define XCHAL_INTLEVEL5_VECTOR_VADDR 0x00002240 +#define XCHAL_INTLEVEL5_VECTOR_PADDR 0x00002240 +#define XCHAL_INTLEVEL6_VECOFS 0x00000280 +#define XCHAL_INTLEVEL6_VECTOR_VADDR 0x00002280 +#define XCHAL_INTLEVEL6_VECTOR_PADDR 0x00002280 +#define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL6_VECOFS +#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL6_VECTOR_VADDR +#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL6_VECTOR_PADDR +#define XCHAL_NMI_VECOFS 0x000002C0 +#define XCHAL_NMI_VECTOR_VADDR 0x000022C0 +#define XCHAL_NMI_VECTOR_PADDR 0x000022C0 +#define XCHAL_INTLEVEL7_VECOFS XCHAL_NMI_VECOFS +#define XCHAL_INTLEVEL7_VECTOR_VADDR XCHAL_NMI_VECTOR_VADDR +#define XCHAL_INTLEVEL7_VECTOR_PADDR XCHAL_NMI_VECTOR_PADDR + + +/*---------------------------------------------------------------------- + DEBUG + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */ +#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ +#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ +#define XCHAL_HAVE_OCD_DIR_ARRAY 1 /* faster OCD option */ + + +/*---------------------------------------------------------------------- + MMU + ----------------------------------------------------------------------*/ + +/* See core-matmap.h header file for more details. */ + +#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */ +#define XCHAL_HAVE_SPANNING_WAY 1 /* one way maps I+D 4GB vaddr */ +#define XCHAL_SPANNING_WAY 6 /* TLB spanning way number */ +#define XCHAL_HAVE_IDENTITY_MAP 0 /* vaddr == paddr always */ +#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */ +#define XCHAL_HAVE_MIMIC_CACHEATTR 0 /* region protection */ +#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */ +#define XCHAL_HAVE_PTP_MMU 1 /* full MMU (with page table + [autorefill] and protection) + usable for an MMU-based OS */ +/* If none of the above last 4 are set, it's a custom TLB configuration. */ +#define XCHAL_ITLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */ +#define XCHAL_DTLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */ + +#define XCHAL_MMU_ASID_BITS 8 /* number of bits in ASIDs */ +#define XCHAL_MMU_RINGS 4 /* number of rings (1..4) */ +#define XCHAL_MMU_RING_BITS 2 /* num of bits in RING field */ + +#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */ + + +#endif /* _XTENSA_CORE_CONFIGURATION_H */ + diff --git a/arch/xtensa/variants/dc233c/include/variant/tie-asm.h b/arch/xtensa/variants/dc233c/include/variant/tie-asm.h new file mode 100644 index 00000000000..5dbd981ea42 --- /dev/null +++ b/arch/xtensa/variants/dc233c/include/variant/tie-asm.h @@ -0,0 +1,193 @@ +/* + * tie-asm.h -- compile-time HAL assembler definitions dependent on CORE & TIE + * + * NOTE: This header file is not meant to be included directly. + */ + +/* This header file contains assembly-language definitions (assembly + macros, etc.) for this specific Xtensa processor's TIE extensions + and options. It is customized to this Xtensa processor configuration. + + Copyright (c) 1999-2010 Tensilica Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef _XTENSA_CORE_TIE_ASM_H +#define _XTENSA_CORE_TIE_ASM_H + +/* Selection parameter values for save-area save/restore macros: */ +/* Option vs. TIE: */ +#define XTHAL_SAS_TIE 0x0001 /* custom extension or coprocessor */ +#define XTHAL_SAS_OPT 0x0002 /* optional (and not a coprocessor) */ +#define XTHAL_SAS_ANYOT 0x0003 /* both of the above */ +/* Whether used automatically by compiler: */ +#define XTHAL_SAS_NOCC 0x0004 /* not used by compiler w/o special opts/code */ +#define XTHAL_SAS_CC 0x0008 /* used by compiler without special opts/code */ +#define XTHAL_SAS_ANYCC 0x000C /* both of the above */ +/* ABI handling across function calls: */ +#define XTHAL_SAS_CALR 0x0010 /* caller-saved */ +#define XTHAL_SAS_CALE 0x0020 /* callee-saved */ +#define XTHAL_SAS_GLOB 0x0040 /* global across function calls (in thread) */ +#define XTHAL_SAS_ANYABI 0x0070 /* all of the above three */ +/* Misc */ +#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */ +#define XTHAL_SAS3(optie,ccuse,abi) ( ((optie) & XTHAL_SAS_ANYOT) \ + | ((ccuse) & XTHAL_SAS_ANYCC) \ + | ((abi) & XTHAL_SAS_ANYABI) ) + + + + /* + * Macro to save all non-coprocessor (extra) custom TIE and optional state + * (not including zero-overhead loop registers). + * Required parameters: + * ptr Save area pointer address register (clobbered) + * (register must contain a 4 byte aligned address). + * at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS + * registers are clobbered, the remaining are unused). + * Optional parameters: + * continue If macro invoked as part of a larger store sequence, set to 1 + * if this is not the first in the sequence. Defaults to 0. + * ofs Offset from start of larger sequence (from value of first ptr + * in sequence) at which to store. Defaults to next available space + * (or 0 if <continue> is 0). + * select Select what category(ies) of registers to store, as a bitmask + * (see XTHAL_SAS_xxx constants). Defaults to all registers. + * alloc Select what category(ies) of registers to allocate; if any + * category is selected here that is not in <select>, space for + * the corresponding registers is skipped without doing any store. + */ + .macro xchal_ncp_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0 + xchal_sa_start \continue, \ofs + // Optional global register used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select) + xchal_sa_align \ptr, 0, 1020, 4, 4 + rur.THREADPTR \at1 // threadptr option + s32i \at1, \ptr, .Lxchal_ofs_+0 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1020, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .endif + // Optional caller-saved registers used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1016, 4, 4 + rsr \at1, ACCLO // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+0 + rsr \at1, ACCHI // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1016, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .endif + // Optional caller-saved registers not used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1004, 4, 4 + rsr \at1, M0 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+0 + rsr \at1, M1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+4 + rsr \at1, M2 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+8 + rsr \at1, M3 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+12 + rsr \at1, SCOMPARE1 // conditional store option + s32i \at1, \ptr, .Lxchal_ofs_+16 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 20 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1004, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 20 + .endif + .endm // xchal_ncp_store + + /* + * Macro to restore all non-coprocessor (extra) custom TIE and optional state + * (not including zero-overhead loop registers). + * Required parameters: + * ptr Save area pointer address register (clobbered) + * (register must contain a 4 byte aligned address). + * at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS + * registers are clobbered, the remaining are unused). + * Optional parameters: + * continue If macro invoked as part of a larger load sequence, set to 1 + * if this is not the first in the sequence. Defaults to 0. + * ofs Offset from start of larger sequence (from value of first ptr + * in sequence) at which to load. Defaults to next available space + * (or 0 if <continue> is 0). + * select Select what category(ies) of registers to load, as a bitmask + * (see XTHAL_SAS_xxx constants). Defaults to all registers. + * alloc Select what category(ies) of registers to allocate; if any + * category is selected here that is not in <select>, space for + * the corresponding registers is skipped without doing any load. + */ + .macro xchal_ncp_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0 + xchal_sa_start \continue, \ofs + // Optional global register used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select) + xchal_sa_align \ptr, 0, 1020, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_+0 + wur.THREADPTR \at1 // threadptr option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1020, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .endif + // Optional caller-saved registers used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1016, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_+0 + wsr \at1, ACCLO // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+4 + wsr \at1, ACCHI // MAC16 option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1016, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .endif + // Optional caller-saved registers not used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1004, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_+0 + wsr \at1, M0 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+4 + wsr \at1, M1 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+8 + wsr \at1, M2 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+12 + wsr \at1, M3 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+16 + wsr \at1, SCOMPARE1 // conditional store option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 20 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1004, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 20 + .endif + .endm // xchal_ncp_load + + +#define XCHAL_NCP_NUM_ATMPS 1 + + + +#define XCHAL_SA_NUM_ATMPS 1 + +#endif /*_XTENSA_CORE_TIE_ASM_H*/ + diff --git a/arch/xtensa/variants/dc233c/include/variant/tie.h b/arch/xtensa/variants/dc233c/include/variant/tie.h new file mode 100644 index 00000000000..815e52bc3d0 --- /dev/null +++ b/arch/xtensa/variants/dc233c/include/variant/tie.h @@ -0,0 +1,150 @@ +/* + * tie.h -- compile-time HAL definitions dependent on CORE & TIE configuration + * + * NOTE: This header file is not meant to be included directly. + */ + +/* This header file describes this specific Xtensa processor's TIE extensions + that extend basic Xtensa core functionality. It is customized to this + Xtensa processor configuration. + + Copyright (c) 1999-2010 Tensilica Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef _XTENSA_CORE_TIE_H +#define _XTENSA_CORE_TIE_H + +#define XCHAL_CP_NUM 1 /* number of coprocessors */ +#define XCHAL_CP_MAX 8 /* max CP ID + 1 (0 if none) */ +#define XCHAL_CP_MASK 0x80 /* bitmask of all CPs by ID */ +#define XCHAL_CP_PORT_MASK 0x80 /* bitmask of only port CPs */ + +/* Basic parameters of each coprocessor: */ +#define XCHAL_CP7_NAME "XTIOP" +#define XCHAL_CP7_IDENT XTIOP +#define XCHAL_CP7_SA_SIZE 0 /* size of state save area */ +#define XCHAL_CP7_SA_ALIGN 1 /* min alignment of save area */ +#define XCHAL_CP_ID_XTIOP 7 /* coprocessor ID (0..7) */ + +/* Filler info for unassigned coprocessors, to simplify arrays etc: */ +#define XCHAL_CP0_SA_SIZE 0 +#define XCHAL_CP0_SA_ALIGN 1 +#define XCHAL_CP1_SA_SIZE 0 +#define XCHAL_CP1_SA_ALIGN 1 +#define XCHAL_CP2_SA_SIZE 0 +#define XCHAL_CP2_SA_ALIGN 1 +#define XCHAL_CP3_SA_SIZE 0 +#define XCHAL_CP3_SA_ALIGN 1 +#define XCHAL_CP4_SA_SIZE 0 +#define XCHAL_CP4_SA_ALIGN 1 +#define XCHAL_CP5_SA_SIZE 0 +#define XCHAL_CP5_SA_ALIGN 1 +#define XCHAL_CP6_SA_SIZE 0 +#define XCHAL_CP6_SA_ALIGN 1 + +/* Save area for non-coprocessor optional and custom (TIE) state: */ +#define XCHAL_NCP_SA_SIZE 32 +#define XCHAL_NCP_SA_ALIGN 4 + +/* Total save area for optional and custom state (NCP + CPn): */ +#define XCHAL_TOTAL_SA_SIZE 32 /* with 16-byte align padding */ +#define XCHAL_TOTAL_SA_ALIGN 4 /* actual minimum alignment */ + +/* + * Detailed contents of save areas. + * NOTE: caller must define the XCHAL_SA_REG macro (not defined here) + * before expanding the XCHAL_xxx_SA_LIST() macros. + * + * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize, + * dbnum,base,regnum,bitsz,gapsz,reset,x...) + * + * s = passed from XCHAL_*_LIST(s), eg. to select how to expand + * ccused = set if used by compiler without special options or code + * abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global) + * kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg) + * opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg) + * name = lowercase reg name (no quotes) + * galign = group byte alignment (power of 2) (galign >= align) + * align = register byte alignment (power of 2) + * asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz) + * (not including any pad bytes required to galign this or next reg) + * dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>) + * base = reg shortname w/o index (or sr=special, ur=TIE user reg) + * regnum = reg index in regfile, or special/TIE-user reg number + * bitsz = number of significant bits (regfile width, or ur/sr mask bits) + * gapsz = intervening bits, if bitsz bits not stored contiguously + * (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize) + * reset = register reset value (or 0 if undefined at reset) + * x = reserved for future use (0 until then) + * + * To filter out certain registers, e.g. to expand only the non-global + * registers used by the compiler, you can do something like this: + * + * #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p) + * #define SELCC0(p...) + * #define SELCC1(abikind,p...) SELAK##abikind(p) + * #define SELAK0(p...) REG(p) + * #define SELAK1(p...) REG(p) + * #define SELAK2(p...) + * #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \ + * ...what you want to expand... + */ + +#define XCHAL_NCP_SA_NUM 8 +#define XCHAL_NCP_SA_LIST(s) \ + XCHAL_SA_REG(s,1,2,1,1, threadptr, 4, 4, 4,0x03E7, ur,231, 32,0,0,0) \ + XCHAL_SA_REG(s,1,0,0,1, acclo, 4, 4, 4,0x0210, sr,16 , 32,0,0,0) \ + XCHAL_SA_REG(s,1,0,0,1, acchi, 4, 4, 4,0x0211, sr,17 , 8,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m0, 4, 4, 4,0x0220, sr,32 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m1, 4, 4, 4,0x0221, sr,33 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m2, 4, 4, 4,0x0222, sr,34 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m3, 4, 4, 4,0x0223, sr,35 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0) + +#define XCHAL_CP0_SA_NUM 0 +#define XCHAL_CP0_SA_LIST(s) /* empty */ + +#define XCHAL_CP1_SA_NUM 0 +#define XCHAL_CP1_SA_LIST(s) /* empty */ + +#define XCHAL_CP2_SA_NUM 0 +#define XCHAL_CP2_SA_LIST(s) /* empty */ + +#define XCHAL_CP3_SA_NUM 0 +#define XCHAL_CP3_SA_LIST(s) /* empty */ + +#define XCHAL_CP4_SA_NUM 0 +#define XCHAL_CP4_SA_LIST(s) /* empty */ + +#define XCHAL_CP5_SA_NUM 0 +#define XCHAL_CP5_SA_LIST(s) /* empty */ + +#define XCHAL_CP6_SA_NUM 0 +#define XCHAL_CP6_SA_LIST(s) /* empty */ + +#define XCHAL_CP7_SA_NUM 0 +#define XCHAL_CP7_SA_LIST(s) /* empty */ + +/* Byte length of instruction from its first nibble (op0 field), per FLIX. */ +#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3 + +#endif /*_XTENSA_CORE_TIE_H*/ + |