diff options
Diffstat (limited to 'arch/powerpc/platforms/85xx')
| -rw-r--r-- | arch/powerpc/platforms/85xx/Kconfig | 51 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/Makefile | 4 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/b4_qds.c | 102 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/corenet_ds.c | 5 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/mpc85xx_mds.c | 4 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/p1022_ds.c | 48 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/p1022_rdk.c | 12 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/ppa8548.c | 98 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/qemu_e500.c | 7 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/sgy_cts1000.c | 176 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/smp.c | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/t4240_qds.c | 98 |
12 files changed, 542 insertions, 65 deletions
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 02d02a09942..efdd37c775a 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -191,12 +191,18 @@ config SBC8548 help This option enables support for the Wind River SBC8548 board +config PPA8548 + bool "Prodrive PPA8548" + help + This option enables support for the Prodrive PPA8548 board. + select DEFAULT_UIMAGE + select HAS_RAPIDIO + config GE_IMP3A bool "GE Intelligent Platforms IMP3A" select DEFAULT_UIMAGE select SWIOTLB select MMIO_NVRAM - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select GE_FPGA help @@ -245,6 +251,14 @@ config P4080_DS help This option enables support for the P4080 DS board +config SGY_CTS1000 + tristate "Servergy CTS-1000 support" + select GPIOLIB + select OF_GPIO + depends on P4080_DS + help + Enable this to support functionality in Servergy's CTS-1000 systems. + endif # PPC32 config P5020_DS @@ -277,7 +291,6 @@ config P5040_DS config PPC_QEMU_E500 bool "QEMU generic e500 platform" - depends on EXPERIMENTAL select DEFAULT_UIMAGE help This option enables support for running as a QEMU guest using @@ -291,6 +304,40 @@ config PPC_QEMU_E500 unset based on the emulated CPU (or actual host CPU in the case of KVM). +if PPC64 + +config T4240_QDS + bool "Freescale T4240 QDS" + select DEFAULT_UIMAGE + select E500 + select PPC_E500MC + select PHYS_64BIT + select SWIOTLB + select ARCH_REQUIRE_GPIOLIB + select GPIO_MPC8XXX + select HAS_RAPIDIO + select PPC_EPAPR_HV_PIC + help + This option enables support for the T4240 QDS board + +config B4_QDS + bool "Freescale B4 QDS" + select DEFAULT_UIMAGE + select E500 + select PPC_E500MC + select PHYS_64BIT + select SWIOTLB + select GPIOLIB + select ARCH_REQUIRE_GPIOLIB + select HAS_RAPIDIO + select PPC_EPAPR_HV_PIC + help + This option enables support for the B4 QDS board + The B4 application development system B4 QDS is a complete + debugging environment intended for engineers developing + applications for the B4. + +endif endif # FSL_SOC_BOOKE config TQM85xx diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 76f679cb04a..2eab37ea4a9 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -22,11 +22,15 @@ obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o obj-$(CONFIG_P5040_DS) += p5040_ds.o corenet_ds.o +obj-$(CONFIG_T4240_QDS) += t4240_qds.o corenet_ds.o +obj-$(CONFIG_B4_QDS) += b4_qds.o corenet_ds.o obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o obj-$(CONFIG_SBC8548) += sbc8548.o +obj-$(CONFIG_PPA8548) += ppa8548.o obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o obj-$(CONFIG_KSI8560) += ksi8560.o obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o obj-$(CONFIG_GE_IMP3A) += ge_imp3a.o obj-$(CONFIG_PPC_QEMU_E500) += qemu_e500.o +obj-$(CONFIG_SGY_CTS1000) += sgy_cts1000.o diff --git a/arch/powerpc/platforms/85xx/b4_qds.c b/arch/powerpc/platforms/85xx/b4_qds.c new file mode 100644 index 00000000000..0c6702f8b88 --- /dev/null +++ b/arch/powerpc/platforms/85xx/b4_qds.c @@ -0,0 +1,102 @@ +/* + * B4 QDS Setup + * Should apply for QDS platform of B4860 and it's personalities. + * viz B4860/B4420/B4220QDS + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/phy.h> + +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/mpic.h> + +#include <linux/of_platform.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include <asm/ehv_pic.h> + +#include "corenet_ds.h" + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init b4_qds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); +#ifdef CONFIG_SMP + extern struct smp_ops_t smp_85xx_ops; +#endif + + if ((of_flat_dt_is_compatible(root, "fsl,B4860QDS")) || + (of_flat_dt_is_compatible(root, "fsl,B4420QDS")) || + (of_flat_dt_is_compatible(root, "fsl,B4220QDS"))) + return 1; + + /* Check if we're running under the Freescale hypervisor */ + if ((of_flat_dt_is_compatible(root, "fsl,B4860QDS-hv")) || + (of_flat_dt_is_compatible(root, "fsl,B4420QDS-hv")) || + (of_flat_dt_is_compatible(root, "fsl,B4220QDS-hv"))) { + ppc_md.init_IRQ = ehv_pic_init; + ppc_md.get_irq = ehv_pic_get_irq; + ppc_md.restart = fsl_hv_restart; + ppc_md.power_off = fsl_hv_halt; + ppc_md.halt = fsl_hv_halt; +#ifdef CONFIG_SMP + /* + * Disable the timebase sync operations because we can't write + * to the timebase registers under the hypervisor. + */ + smp_85xx_ops.give_timebase = NULL; + smp_85xx_ops.take_timebase = NULL; +#endif + return 1; + } + + return 0; +} + +define_machine(b4_qds) { + .name = "B4 QDS", + .probe = b4_qds_probe, + .setup_arch = corenet_ds_setup_arch, + .init_IRQ = corenet_ds_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif +/* coreint doesn't play nice with lazy EE, use legacy mpic for now */ +#ifdef CONFIG_PPC64 + .get_irq = mpic_get_irq, +#else + .get_irq = mpic_get_coreint_irq, +#endif + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +#ifdef CONFIG_PPC64 + .power_save = book3e_idle, +#else + .power_save = e500_idle, +#endif +}; + +machine_arch_initcall(b4_qds, corenet_ds_publish_devices); + +#ifdef CONFIG_SWIOTLB +machine_arch_initcall(b4_qds, swiotlb_setup_bus_notifier); +#endif diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c index 6f355d8c92f..c59c617eee9 100644 --- a/arch/powerpc/platforms/85xx/corenet_ds.c +++ b/arch/powerpc/platforms/85xx/corenet_ds.c @@ -40,7 +40,7 @@ void __init corenet_ds_pic_init(void) if (ppc_md.get_irq == mpic_get_coreint_irq) flags |= MPIC_ENABLE_COREINT; - mpic = mpic_alloc(NULL, 0, flags, 0, 256, " OpenPIC "); + mpic = mpic_alloc(NULL, 0, flags, 0, 512, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); @@ -83,6 +83,9 @@ static const struct of_device_id of_device_ids[] = { { .compatible = "fsl,qoriq-pcie-v2.4", }, + { + .compatible = "fsl,qoriq-pcie-v3.0", + }, /* The following two are for the Freescale hypervisor */ { .name = "hypervisor", diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index bd12588fa25..a7b3621a8df 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -206,9 +206,7 @@ static void __init mpc85xx_mds_reset_ucc_phys(void) setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); - for (np = NULL; (np = of_find_compatible_node(np, - "network", - "ucc_geth")) != NULL;) { + for_each_compatible_node(np, "network", "ucc_geth") { const unsigned int *prop; int ucc_num; diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index 7328b8d7412..e611e79f23c 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -106,42 +106,6 @@ (c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \ (c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT)) -/** - * p1022ds_get_pixel_format: return the Area Descriptor for a given pixel depth - * - * The Area Descriptor is a 32-bit value that determine which bits in each - * pixel are to be used for each color. - */ -static u32 p1022ds_get_pixel_format(enum fsl_diu_monitor_port port, - unsigned int bits_per_pixel) -{ - switch (bits_per_pixel) { - case 32: - /* 0x88883316 */ - return MAKE_AD(3, 2, 0, 1, 3, 8, 8, 8, 8); - case 24: - /* 0x88082219 */ - return MAKE_AD(4, 0, 1, 2, 2, 0, 8, 8, 8); - case 16: - /* 0x65053118 */ - return MAKE_AD(4, 2, 1, 0, 1, 5, 6, 5, 0); - default: - pr_err("fsl-diu: unsupported pixel depth %u\n", bits_per_pixel); - return 0; - } -} - -/** - * p1022ds_set_gamma_table: update the gamma table, if necessary - * - * On some boards, the gamma table for some ports may need to be modified. - * This is not the case on the P1022DS, so we do nothing. -*/ -static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port, - char *gamma_table_base) -{ -} - struct fsl_law { u32 lawbar; u32 reserved1; @@ -215,13 +179,13 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port) /* Map the global utilities registers. */ guts_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts"); if (!guts_node) { - pr_err("p1022ds: missing global utilties device node\n"); + pr_err("p1022ds: missing global utilities device node\n"); return; } guts = of_iomap(guts_node, 0); if (!guts) { - pr_err("p1022ds: could not map global utilties device\n"); + pr_err("p1022ds: could not map global utilities device\n"); goto exit; } @@ -302,7 +266,7 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port) goto exit; } cs1_addr = lbc_br_to_phys(ecm, num_laws, br1); - if (!cs0_addr) { + if (!cs1_addr) { pr_err("p1022ds: could not determine physical address for CS1" " (BR1=%08x)\n", br1); goto exit; @@ -416,14 +380,14 @@ void p1022ds_set_pixel_clock(unsigned int pixclock) /* Map the global utilities registers. */ guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts"); if (!guts_np) { - pr_err("p1022ds: missing global utilties device node\n"); + pr_err("p1022ds: missing global utilities device node\n"); return; } guts = of_iomap(guts_np, 0); of_node_put(guts_np); if (!guts) { - pr_err("p1022ds: could not map global utilties device\n"); + pr_err("p1022ds: could not map global utilities device\n"); return; } @@ -510,8 +474,6 @@ static void __init p1022_ds_setup_arch(void) ppc_md.progress("p1022_ds_setup_arch()", 0); #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) - diu_ops.get_pixel_format = p1022ds_get_pixel_format; - diu_ops.set_gamma_table = p1022ds_set_gamma_table; diu_ops.set_monitor_port = p1022ds_set_monitor_port; diu_ops.set_pixel_clock = p1022ds_set_pixel_clock; diu_ops.valid_monitor_port = p1022ds_valid_monitor_port; diff --git a/arch/powerpc/platforms/85xx/p1022_rdk.c b/arch/powerpc/platforms/85xx/p1022_rdk.c index 55ffa1cc380..8c9297112b3 100644 --- a/arch/powerpc/platforms/85xx/p1022_rdk.c +++ b/arch/powerpc/platforms/85xx/p1022_rdk.c @@ -35,17 +35,6 @@ #define CLKDVDR_PXCLK_MASK 0x00FF0000 /** - * p1022rdk_set_monitor_port: switch the output to a different monitor port - */ -static void p1022rdk_set_monitor_port(enum fsl_diu_monitor_port port) -{ - if (port != FSL_DIU_PORT_DVI) { - pr_err("p1022rdk: unsupported monitor port %i\n", port); - return; - } -} - -/** * p1022rdk_set_pixel_clock: program the DIU's clock * * @pixclock: the wavelength, in picoseconds, of the clock @@ -124,7 +113,6 @@ static void __init p1022_rdk_setup_arch(void) ppc_md.progress("p1022_rdk_setup_arch()", 0); #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) - diu_ops.set_monitor_port = p1022rdk_set_monitor_port; diu_ops.set_pixel_clock = p1022rdk_set_pixel_clock; diu_ops.valid_monitor_port = p1022rdk_valid_monitor_port; #endif diff --git a/arch/powerpc/platforms/85xx/ppa8548.c b/arch/powerpc/platforms/85xx/ppa8548.c new file mode 100644 index 00000000000..6a7704b92c3 --- /dev/null +++ b/arch/powerpc/platforms/85xx/ppa8548.c @@ -0,0 +1,98 @@ +/* + * ppa8548 setup and early boot code. + * + * Copyright 2009 Prodrive B.V.. + * + * By Stef van Os (see MAINTAINERS for contact information) + * + * Based on the SBC8548 support - Copyright 2007 Wind River Systems Inc. + * Based on the MPC8548CDS support - Copyright 2005 Freescale Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/reboot.h> +#include <linux/seq_file.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/udbg.h> +#include <asm/mpic.h> + +#include <sysdev/fsl_soc.h> + +static void __init ppa8548_pic_init(void) +{ + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, + 0, 256, " OpenPIC "); + BUG_ON(mpic == NULL); + mpic_init(mpic); +} + +/* + * Setup the architecture + */ +static void __init ppa8548_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("ppa8548_setup_arch()", 0); +} + +static void ppa8548_show_cpuinfo(struct seq_file *m) +{ + uint32_t svid, phid1; + + svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: Prodrive B.V.\n"); + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + + /* Display cpu Pll setting */ + phid1 = mfspr(SPRN_HID1); + seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); +} + +static struct of_device_id __initdata of_bus_ids[] = { + { .name = "soc", }, + { .type = "soc", }, + { .compatible = "simple-bus", }, + { .compatible = "gianfar", }, + { .compatible = "fsl,srio", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(ppa8548, declare_of_platform_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init ppa8548_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "ppa8548"); +} + +define_machine(ppa8548) { + .name = "ppa8548", + .probe = ppa8548_probe, + .setup_arch = ppa8548_setup_arch, + .init_IRQ = ppa8548_pic_init, + .show_cpuinfo = ppa8548_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/qemu_e500.c b/arch/powerpc/platforms/85xx/qemu_e500.c index f6ea5618c73..5cefc5a9a14 100644 --- a/arch/powerpc/platforms/85xx/qemu_e500.c +++ b/arch/powerpc/platforms/85xx/qemu_e500.c @@ -29,9 +29,10 @@ void __init qemu_e500_pic_init(void) { struct mpic *mpic; + unsigned int flags = MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU | + MPIC_ENABLE_COREINT; - mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU, - 0, 256, " OpenPIC "); + mpic = mpic_alloc(NULL, 0, flags, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); @@ -66,7 +67,7 @@ define_machine(qemu_e500) { #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, #endif - .get_irq = mpic_get_irq, + .get_irq = mpic_get_coreint_irq, .restart = fsl_rstcr_restart, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, diff --git a/arch/powerpc/platforms/85xx/sgy_cts1000.c b/arch/powerpc/platforms/85xx/sgy_cts1000.c new file mode 100644 index 00000000000..7179726ba5c --- /dev/null +++ b/arch/powerpc/platforms/85xx/sgy_cts1000.c @@ -0,0 +1,176 @@ +/* + * Servergy CTS-1000 Setup + * + * Maintained by Ben Collins <ben.c@servergy.com> + * + * Copyright 2012 by Servergy, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/platform_device.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/of_gpio.h> +#include <linux/workqueue.h> +#include <linux/reboot.h> +#include <linux/interrupt.h> + +#include <asm/machdep.h> + +static struct device_node *halt_node; + +static struct of_device_id child_match[] = { + { + .compatible = "sgy,gpio-halt", + }, + {}, +}; + +static void gpio_halt_wfn(struct work_struct *work) +{ + /* Likely wont return */ + orderly_poweroff(true); +} +static DECLARE_WORK(gpio_halt_wq, gpio_halt_wfn); + +static void gpio_halt_cb(void) +{ + enum of_gpio_flags flags; + int trigger, gpio; + + if (!halt_node) + return; + + gpio = of_get_gpio_flags(halt_node, 0, &flags); + + if (!gpio_is_valid(gpio)) + return; + + trigger = (flags == OF_GPIO_ACTIVE_LOW); + + printk(KERN_INFO "gpio-halt: triggering GPIO.\n"); + + /* Probably wont return */ + gpio_set_value(gpio, trigger); +} + +/* This IRQ means someone pressed the power button and it is waiting for us + * to handle the shutdown/poweroff. */ +static irqreturn_t gpio_halt_irq(int irq, void *__data) +{ + printk(KERN_INFO "gpio-halt: shutdown due to power button IRQ.\n"); + schedule_work(&gpio_halt_wq); + + return IRQ_HANDLED; +}; + +static int gpio_halt_probe(struct platform_device *pdev) +{ + enum of_gpio_flags flags; + struct device_node *node = pdev->dev.of_node; + int gpio, err, irq; + int trigger; + + if (!node) + return -ENODEV; + + /* If there's no matching child, this isn't really an error */ + halt_node = of_find_matching_node(node, child_match); + if (!halt_node) + return 0; + + /* Technically we could just read the first one, but punish + * DT writers for invalid form. */ + if (of_gpio_count(halt_node) != 1) + return -EINVAL; + + /* Get the gpio number relative to the dynamic base. */ + gpio = of_get_gpio_flags(halt_node, 0, &flags); + if (!gpio_is_valid(gpio)) + return -EINVAL; + + err = gpio_request(gpio, "gpio-halt"); + if (err) { + printk(KERN_ERR "gpio-halt: error requesting GPIO %d.\n", + gpio); + halt_node = NULL; + return err; + } + + trigger = (flags == OF_GPIO_ACTIVE_LOW); + + gpio_direction_output(gpio, !trigger); + + /* Now get the IRQ which tells us when the power button is hit */ + irq = irq_of_parse_and_map(halt_node, 0); + err = request_irq(irq, gpio_halt_irq, IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, "gpio-halt", halt_node); + if (err) { + printk(KERN_ERR "gpio-halt: error requesting IRQ %d for " + "GPIO %d.\n", irq, gpio); + gpio_free(gpio); + halt_node = NULL; + return err; + } + + /* Register our halt function */ + ppc_md.halt = gpio_halt_cb; + ppc_md.power_off = gpio_halt_cb; + + printk(KERN_INFO "gpio-halt: registered GPIO %d (%d trigger, %d" + " irq).\n", gpio, trigger, irq); + + return 0; +} + +static int gpio_halt_remove(struct platform_device *pdev) +{ + if (halt_node) { + int gpio = of_get_gpio(halt_node, 0); + int irq = irq_of_parse_and_map(halt_node, 0); + + free_irq(irq, halt_node); + + ppc_md.halt = NULL; + ppc_md.power_off = NULL; + + gpio_free(gpio); + + halt_node = NULL; + } + + return 0; +} + +static struct of_device_id gpio_halt_match[] = { + /* We match on the gpio bus itself and scan the children since they + * wont be matched against us. We know the bus wont match until it + * has been registered too. */ + { + .compatible = "fsl,qoriq-gpio", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, gpio_halt_match); + +static struct platform_driver gpio_halt_driver = { + .driver = { + .name = "gpio-halt", + .owner = THIS_MODULE, + .of_match_table = gpio_halt_match, + }, + .probe = gpio_halt_probe, + .remove = gpio_halt_remove, +}; + +module_platform_driver(gpio_halt_driver); + +MODULE_DESCRIPTION("Driver to support GPIO triggered system halt for Servergy CTS-1000 Systems."); +MODULE_VERSION("1.0"); +MODULE_AUTHOR("Ben Collins <ben.c@servergy.com>"); +MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index 148c2f2d978..6a1759939c6 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -201,7 +201,7 @@ static int __cpuinit smp_85xx_kick_cpu(int nr) * We don't set the BPTR register here since it already points * to the boot page properly. */ - mpic_reset_core(hw_cpu); + mpic_reset_core(nr); /* * wait until core is ready... diff --git a/arch/powerpc/platforms/85xx/t4240_qds.c b/arch/powerpc/platforms/85xx/t4240_qds.c new file mode 100644 index 00000000000..5998e9f3330 --- /dev/null +++ b/arch/powerpc/platforms/85xx/t4240_qds.c @@ -0,0 +1,98 @@ +/* + * T4240 QDS Setup + * + * Maintained by Kumar Gala (see MAINTAINERS for contact information) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/phy.h> + +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/mpic.h> + +#include <linux/of_platform.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include <asm/ehv_pic.h> + +#include "corenet_ds.h" + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init t4240_qds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); +#ifdef CONFIG_SMP + extern struct smp_ops_t smp_85xx_ops; +#endif + + if (of_flat_dt_is_compatible(root, "fsl,T4240QDS")) + return 1; + + /* Check if we're running under the Freescale hypervisor */ + if (of_flat_dt_is_compatible(root, "fsl,T4240QDS-hv")) { + ppc_md.init_IRQ = ehv_pic_init; + ppc_md.get_irq = ehv_pic_get_irq; + ppc_md.restart = fsl_hv_restart; + ppc_md.power_off = fsl_hv_halt; + ppc_md.halt = fsl_hv_halt; +#ifdef CONFIG_SMP + /* + * Disable the timebase sync operations because we can't write + * to the timebase registers under the hypervisor. + */ + smp_85xx_ops.give_timebase = NULL; + smp_85xx_ops.take_timebase = NULL; +#endif + return 1; + } + + return 0; +} + +define_machine(t4240_qds) { + .name = "T4240 QDS", + .probe = t4240_qds_probe, + .setup_arch = corenet_ds_setup_arch, + .init_IRQ = corenet_ds_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif +/* coreint doesn't play nice with lazy EE, use legacy mpic for now */ +#ifdef CONFIG_PPC64 + .get_irq = mpic_get_irq, +#else + .get_irq = mpic_get_coreint_irq, +#endif + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +#ifdef CONFIG_PPC64 + .power_save = book3e_idle, +#else + .power_save = e500_idle, +#endif +}; + +machine_arch_initcall(t4240_qds, corenet_ds_publish_devices); + +#ifdef CONFIG_SWIOTLB +machine_arch_initcall(t4240_qds, swiotlb_setup_bus_notifier); +#endif |