diff options
Diffstat (limited to 'arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h')
| -rw-r--r-- | arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h | 205 |
1 files changed, 205 insertions, 0 deletions
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h new file mode 100644 index 00000000000..24948cc4246 --- /dev/null +++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h @@ -0,0 +1,205 @@ +/* + * Copyright (c) 2000-2006 PMC-Sierra INC. + * + * This program is free software; you can redistribute it + * and/or modify it under the terms of the GNU General + * Public License as published by the Free Software + * Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be + * useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA + * 02139, USA. + * + * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND + * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS + * SOFTWARE. + */ + +#ifndef _MSP_PCI_H_ +#define _MSP_PCI_H_ + +#define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220)) + +/* + * It is convenient to program the OATRAN register so that + * Athena virtual address space and PCI address space are + * the same. This is not a requirement, just a convenience. + * + * The only hard restrictions on the value of OATRAN is that + * OATRAN must not be programmed to allow translated memory + * addresses to fall within the lowest 512MB of + * PCI address space. This region is hardcoded + * for use as Athena PCI Host Controller target + * access memory space to the Athena's SDRAM. + * + * Note that OATRAN applies only to memory accesses, not + * to I/O accesses. + * + * To program OATRAN to make Athena virtual address space + * and PCI address space have the same values, OATRAN + * is to be programmed to 0xB8000000. The top seven + * bits of the value mimic the seven bits clipped off + * by the PCI Host controller. + * + * With OATRAN at the said value, when the CPU does + * an access to its virtual address at, say 0xB900_5000, + * the address appearing on the PCI bus will be + * 0xB900_5000. + * - Michael Penner + */ +#define MSP_PCI_OATRAN 0xB8000000UL + +#define MSP_PCI_SPACE_BASE (MSP_PCI_OATRAN + 0x1002000UL) +#define MSP_PCI_SPACE_SIZE (0x3000000UL - 0x2000) +#define MSP_PCI_SPACE_END \ + (MSP_PCI_SPACE_BASE + MSP_PCI_SPACE_SIZE - 1) +#define MSP_PCI_IOSPACE_BASE (MSP_PCI_OATRAN + 0x1001000UL) +#define MSP_PCI_IOSPACE_SIZE 0x1000 +#define MSP_PCI_IOSPACE_END \ + (MSP_PCI_IOSPACE_BASE + MSP_PCI_IOSPACE_SIZE - 1) + +/* IRQ for PCI status interrupts */ +#define PCI_STAT_IRQ 20 + +#define QFLUSH_REG_1 0xB7F40000 + +typedef volatile unsigned int pcireg; +typedef void * volatile ppcireg; + +struct pci_block_copy +{ + pcireg unused1; /* +0x00 */ + pcireg unused2; /* +0x04 */ + ppcireg unused3; /* +0x08 */ + ppcireg unused4; /* +0x0C */ + pcireg unused5; /* +0x10 */ + pcireg unused6; /* +0x14 */ + pcireg unused7; /* +0x18 */ + ppcireg unused8; /* +0x1C */ + ppcireg unused9; /* +0x20 */ + pcireg unusedA; /* +0x24 */ + ppcireg unusedB; /* +0x28 */ + ppcireg unusedC; /* +0x2C */ +}; + +enum +{ + config_device_vendor, /* 0 */ + config_status_command, /* 1 */ + config_class_revision, /* 2 */ + config_BIST_header_latency_cache, /* 3 */ + config_BAR0, /* 4 */ + config_BAR1, /* 5 */ + config_BAR2, /* 6 */ + config_not_used7, /* 7 */ + config_not_used8, /* 8 */ + config_not_used9, /* 9 */ + config_CIS, /* 10 */ + config_subsystem, /* 11 */ + config_not_used12, /* 12 */ + config_capabilities, /* 13 */ + config_not_used14, /* 14 */ + config_lat_grant_irq, /* 15 */ + config_message_control,/* 16 */ + config_message_addr, /* 17 */ + config_message_data, /* 18 */ + config_VPD_addr, /* 19 */ + config_VPD_data, /* 20 */ + config_maxregs /* 21 - number of registers */ +}; + +struct msp_pci_regs +{ + pcireg hop_unused_00; /* +0x00 */ + pcireg hop_unused_04; /* +0x04 */ + pcireg hop_unused_08; /* +0x08 */ + pcireg hop_unused_0C; /* +0x0C */ + pcireg hop_unused_10; /* +0x10 */ + pcireg hop_unused_14; /* +0x14 */ + pcireg hop_unused_18; /* +0x18 */ + pcireg hop_unused_1C; /* +0x1C */ + pcireg hop_unused_20; /* +0x20 */ + pcireg hop_unused_24; /* +0x24 */ + pcireg hop_unused_28; /* +0x28 */ + pcireg hop_unused_2C; /* +0x2C */ + pcireg hop_unused_30; /* +0x30 */ + pcireg hop_unused_34; /* +0x34 */ + pcireg if_control; /* +0x38 */ + pcireg oatran; /* +0x3C */ + pcireg reset_ctl; /* +0x40 */ + pcireg config_addr; /* +0x44 */ + pcireg hop_unused_48; /* +0x48 */ + pcireg msg_signaled_int_status; /* +0x4C */ + pcireg msg_signaled_int_mask; /* +0x50 */ + pcireg if_status; /* +0x54 */ + pcireg if_mask; /* +0x58 */ + pcireg hop_unused_5C; /* +0x5C */ + pcireg hop_unused_60; /* +0x60 */ + pcireg hop_unused_64; /* +0x64 */ + pcireg hop_unused_68; /* +0x68 */ + pcireg hop_unused_6C; /* +0x6C */ + pcireg hop_unused_70; /* +0x70 */ + + struct pci_block_copy pci_bc[2] __attribute__((aligned(64))); + + pcireg error_hdr1; /* +0xE0 */ + pcireg error_hdr2; /* +0xE4 */ + + pcireg config[config_maxregs] __attribute__((aligned(256))); + +}; + +#define BPCI_CFGADDR_BUSNUM_SHF 16 +#define BPCI_CFGADDR_FUNCTNUM_SHF 8 +#define BPCI_CFGADDR_REGNUM_SHF 2 +#define BPCI_CFGADDR_ENABLE (1<<31) + +#define BPCI_IFCONTROL_RTO (1<<20) /* Retry timeout */ +#define BPCI_IFCONTROL_HCE (1<<16) /* Host configuration enable */ +#define BPCI_IFCONTROL_CTO_SHF 12 /* Shift count for CTO bits */ +#define BPCI_IFCONTROL_SE (1<<5) /* Enable exceptions on errors */ +#define BPCI_IFCONTROL_BIST (1<<4) /* Use BIST in per. mode */ +#define BPCI_IFCONTROL_CAP (1<<3) /* Enable capabilities */ +#define BPCI_IFCONTROL_MMC_SHF 0 /* Shift count for MMC bits */ + +#define BPCI_IFSTATUS_MGT (1<<8) /* Master Grant timeout */ +#define BPCI_IFSTATUS_MTT (1<<9) /* Master TRDY timeout */ +#define BPCI_IFSTATUS_MRT (1<<10) /* Master retry timeout */ +#define BPCI_IFSTATUS_BC0F (1<<13) /* Block copy 0 fault */ +#define BPCI_IFSTATUS_BC1F (1<<14) /* Block copy 1 fault */ +#define BPCI_IFSTATUS_PCIU (1<<15) /* PCI unable to respond */ +#define BPCI_IFSTATUS_BSIZ (1<<16) /* PCI access with illegal size */ +#define BPCI_IFSTATUS_BADD (1<<17) /* PCI access with illegal addr */ +#define BPCI_IFSTATUS_RTO (1<<18) /* Retry time out */ +#define BPCI_IFSTATUS_SER (1<<19) /* System error */ +#define BPCI_IFSTATUS_PER (1<<20) /* Parity error */ +#define BPCI_IFSTATUS_LCA (1<<21) /* Local CPU abort */ +#define BPCI_IFSTATUS_MEM (1<<22) /* Memory prot. violation */ +#define BPCI_IFSTATUS_ARB (1<<23) /* Arbiter timed out */ +#define BPCI_IFSTATUS_STA (1<<27) /* Signaled target abort */ +#define BPCI_IFSTATUS_TA (1<<28) /* Target abort */ +#define BPCI_IFSTATUS_MA (1<<29) /* Master abort */ +#define BPCI_IFSTATUS_PEI (1<<30) /* Parity error as initiator */ +#define BPCI_IFSTATUS_PET (1<<31) /* Parity error as target */ + +#define BPCI_RESETCTL_PR (1<<0) /* True if reset asserted */ +#define BPCI_RESETCTL_RT (1<<4) /* Release time */ +#define BPCI_RESETCTL_CT (1<<8) /* Config time */ +#define BPCI_RESETCTL_PE (1<<12) /* PCI enabled */ +#define BPCI_RESETCTL_HM (1<<13) /* PCI host mode */ +#define BPCI_RESETCTL_RI (1<<14) /* PCI reset in */ + +extern struct msp_pci_regs msp_pci_regs + __attribute__((section(".register"))); +extern unsigned long msp_pci_config_space + __attribute__((section(".register"))); + +#endif /* !_MSP_PCI_H_ */ |