1 files changed, 0 insertions, 258 deletions
diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c
deleted file mode 100644
index d88bd31319e..00000000000
--- a/arch/blackfin/mach-common/cpufreq.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Blackfin core clock scaling
- *
- * Copyright 2008-2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
-#include <linux/fs.h>
-#include <linux/delay.h>
-#include <asm/blackfin.h>
-#include <asm/time.h>
-#include <asm/dpmc.h>
-
-
-/* this is the table of CCLK frequencies, in Hz */
-/* .index is the entry in the auxiliary dpm_state_table[] */
-static struct cpufreq_frequency_table bfin_freq_table[] = {
-	{
-		.frequency = CPUFREQ_TABLE_END,
-		.index = 0,
-	},
-	{
-		.frequency = CPUFREQ_TABLE_END,
-		.index = 1,
-	},
-	{
-		.frequency = CPUFREQ_TABLE_END,
-		.index = 2,
-	},
-	{
-		.frequency = CPUFREQ_TABLE_END,
-		.index = 0,
-	},
-};
-
-static struct bfin_dpm_state {
-	unsigned int csel; /* system clock divider */
-	unsigned int tscale; /* change the divider on the core timer interrupt */
-} dpm_state_table[3];
-
-#if defined(CONFIG_CYCLES_CLOCKSOURCE)
-/*
- * normalized to maximum frequency offset for CYCLES,
- * used in time-ts cycles clock source, but could be used
- * somewhere also.
- */
-unsigned long long __bfin_cycles_off;
-unsigned int __bfin_cycles_mod;
-#endif
-
-/**************************************************************************/
-static void __init bfin_init_tables(unsigned long cclk, unsigned long sclk)
-{
-
-	unsigned long csel, min_cclk;
-	int index;
-
-	/* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */
-#if ANOMALY_05000273 || ANOMALY_05000274 || \
-	(!(defined(CONFIG_BF54x) || defined(CONFIG_BF60x)) \
-	&& defined(CONFIG_BFIN_EXTMEM_DCACHEABLE))
-	min_cclk = sclk * 2;
-#else
-	min_cclk = sclk;
-#endif
-
-#ifndef CONFIG_BF60x
-	csel = ((bfin_read_PLL_DIV() & CSEL) >> 4);
-#else
-	csel = bfin_read32(CGU0_DIV) & 0x1F;
-#endif
-
-	for (index = 0;  (cclk >> index) >= min_cclk && csel <= 3 && index < 3; index++, csel++) {
-		bfin_freq_table[index].frequency = cclk >> index;
-#ifndef CONFIG_BF60x
-		dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */
-#else
-		dpm_state_table[index].csel = csel;
-#endif
-		dpm_state_table[index].tscale =  (TIME_SCALE >> index) - 1;
-
-		pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n",
-						 bfin_freq_table[index].frequency,
-						 dpm_state_table[index].csel,
-						 dpm_state_table[index].tscale);
-	}
-	return;
-}
-
-static void bfin_adjust_core_timer(void *info)
-{
-	unsigned int tscale;
-	unsigned int index = *(unsigned int *)info;
-
-	/* we have to adjust the core timer, because it is using cclk */
-	tscale = dpm_state_table[index].tscale;
-	bfin_write_TSCALE(tscale);
-	return;
-}
-
-static unsigned int bfin_getfreq_khz(unsigned int cpu)
-{
-	/* Both CoreA/B have the same core clock */
-	return get_cclk() / 1000;
-}
-
-#ifdef CONFIG_BF60x
-unsigned long cpu_set_cclk(int cpu, unsigned long new)
-{
-	struct clk *clk;
-	int ret;
-
-	clk = clk_get(NULL, "CCLK");
-	if (IS_ERR(clk))
-		return -ENODEV;
-
-	ret = clk_set_rate(clk, new);
-	clk_put(clk);
-	return ret;
-}
-#endif
-
-static int bfin_target(struct cpufreq_policy *poli,
-			unsigned int target_freq, unsigned int relation)
-{
-#ifndef CONFIG_BF60x
-	unsigned int plldiv;
-#endif
-	unsigned int index, cpu;
-	unsigned long cclk_hz;
-	struct cpufreq_freqs freqs;
-	static unsigned long lpj_ref;
-	static unsigned int  lpj_ref_freq;
-	int ret = 0;
-
-#if defined(CONFIG_CYCLES_CLOCKSOURCE)
-	cycles_t cycles;
-#endif
-
-	for_each_online_cpu(cpu) {
-		struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
-
-		if (!policy)
-			continue;
-
-		if (cpufreq_frequency_table_target(policy, bfin_freq_table,
-				 target_freq, relation, &index))
-			return -EINVAL;
-
-		cclk_hz = bfin_freq_table[index].frequency;
-
-		freqs.old = bfin_getfreq_khz(0);
-		freqs.new = cclk_hz;
-		freqs.cpu = cpu;
-
-		pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n",
-			 cclk_hz, target_freq, freqs.old);
-
-		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-		if (cpu == CPUFREQ_CPU) {
-#ifndef CONFIG_BF60x
-			plldiv = (bfin_read_PLL_DIV() & SSEL) |
-						dpm_state_table[index].csel;
-			bfin_write_PLL_DIV(plldiv);
-#else
-			ret = cpu_set_cclk(cpu, freqs.new * 1000);
-			if (ret != 0) {
-				WARN_ONCE(ret, "cpufreq set freq failed %d\n", ret);
-				break;
-			}
-#endif
-			on_each_cpu(bfin_adjust_core_timer, &index, 1);
-#if defined(CONFIG_CYCLES_CLOCKSOURCE)
-			cycles = get_cycles();
-			SSYNC();
-			cycles += 10; /* ~10 cycles we lose after get_cycles() */
-			__bfin_cycles_off +=
-			    (cycles << __bfin_cycles_mod) - (cycles << index);
-			__bfin_cycles_mod = index;
-#endif
-			if (!lpj_ref_freq) {
-				lpj_ref = loops_per_jiffy;
-				lpj_ref_freq = freqs.old;
-			}
-			if (freqs.new != freqs.old) {
-				loops_per_jiffy = cpufreq_scale(lpj_ref,
-						lpj_ref_freq, freqs.new);
-			}
-		}
-		/* TODO: just test case for cycles clock source, remove later */
-		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	}
-
-	pr_debug("cpufreq: done\n");
-	return ret;
-}
-
-static int bfin_verify_speed(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, bfin_freq_table);
-}
-
-static int __bfin_cpu_init(struct cpufreq_policy *policy)
-{
-
-	unsigned long cclk, sclk;
-
-	cclk = get_cclk() / 1000;
-	sclk = get_sclk() / 1000;
-
-	if (policy->cpu == CPUFREQ_CPU)
-		bfin_init_tables(cclk, sclk);
-
-	policy->cpuinfo.transition_latency = 50000; /* 50us assumed */
-
-	policy->cur = cclk;
-	cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu);
-	return cpufreq_frequency_table_cpuinfo(policy, bfin_freq_table);
-}
-
-static struct freq_attr *bfin_freq_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver bfin_driver = {
-	.verify = bfin_verify_speed,
-	.target = bfin_target,
-	.get = bfin_getfreq_khz,
-	.init = __bfin_cpu_init,
-	.name = "bfin cpufreq",
-	.owner = THIS_MODULE,
-	.attr = bfin_freq_attr,
-};
-
-static int __init bfin_cpu_init(void)
-{
-	return cpufreq_register_driver(&bfin_driver);
-}
-
-static void __exit bfin_cpu_exit(void)
-{
-	cpufreq_unregister_driver(&bfin_driver);
-}
-
-MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
-MODULE_DESCRIPTION("cpufreq driver for Blackfin");
-MODULE_LICENSE("GPL");
-
-module_init(bfin_cpu_init);
-module_exit(bfin_cpu_exit);