diff options
Diffstat (limited to 'arch/arm/mach-shmobile/board-ag5evm.c')
| -rw-r--r-- | arch/arm/mach-shmobile/board-ag5evm.c | 82 |
1 files changed, 79 insertions, 3 deletions
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 5a6f22f05e9..d82c010fdfc 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -27,6 +27,8 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/dma-mapping.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/serial_sci.h> #include <linux/smsc911x.h> #include <linux/gpio.h> @@ -52,6 +54,12 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/traps.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource smsc9220_resources[] = { [0] = { .start = 0x14000000, @@ -142,6 +150,13 @@ static struct platform_device fsi_device = { .resource = fsi_resources, }; +/* Fixed 1.8V regulator to be used by MMCIF */ +static struct regulator_consumer_supply fixed1v8_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), +}; + static struct resource sh_mmcif_resources[] = { [0] = { .name = "MMCIF", @@ -364,6 +379,13 @@ static struct platform_device mipidsi0_device = { }, }; +/* Fixed 2.8V regulators to be used by SDHI0 */ +static struct regulator_consumer_supply fixed2v8_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + /* SDHI0 */ static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, @@ -408,8 +430,57 @@ static struct platform_device sdhi0_device = { }, }; -void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) +/* Fixed 3.3V regulator to be used by SDHI1 */ +static struct regulator_consumer_supply cn4_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + +static struct regulator_init_data cn4_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(cn4_power_consumers), + .consumer_supplies = cn4_power_consumers, +}; + +static struct fixed_voltage_config cn4_power_info = { + .supply_name = "CN4 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = GPIO_PORT114, + .enable_high = 1, + .init_data = &cn4_power_init_data, +}; + +static struct platform_device cn4_power = { + .name = "reg-fixed-voltage", + .id = 2, + .dev = { + .platform_data = &cn4_power_info, + }, +}; + +static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) { + static int power_gpio = -EINVAL; + + if (power_gpio < 0) { + int ret = gpio_request(GPIO_PORT114, "sdhi1_power"); + if (!ret) { + power_gpio = GPIO_PORT114; + gpio_direction_output(power_gpio, 0); + } + } + + /* + * If requesting the GPIO above failed, it means, that the regulator got + * probed and grabbed the GPIO, but we don't know, whether the sdhi + * driver already uses the regulator. If it doesn't, we have to toggle + * the GPIO ourselves, even though it is now owned by the fixed + * regulator driver. We have to live with the race in case the driver + * gets unloaded and the GPIO freed between these two steps. + */ gpio_set_value(GPIO_PORT114, state); } @@ -455,6 +526,7 @@ static struct platform_device sdhi1_device = { }; static struct platform_device *ag5evm_devices[] __initdata = { + &cn4_power, ð_device, &keysc_device, &fsi_device, @@ -468,6 +540,12 @@ static struct platform_device *ag5evm_devices[] __initdata = { static void __init ag5evm_init(void) { + regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, + ARRAY_SIZE(fixed1v8_power_consumers), 1800000); + regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers, + ARRAY_SIZE(fixed2v8_power_consumers), 3300000); + regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + sh73a0_pinmux_init(); /* enable SCIFA2 */ @@ -562,8 +640,6 @@ static void __init ag5evm_init(void) gpio_request(GPIO_FN_SDHID1_2_PU, NULL); gpio_request(GPIO_FN_SDHID1_1_PU, NULL); gpio_request(GPIO_FN_SDHID1_0_PU, NULL); - gpio_request(GPIO_PORT114, "sdhi1_power"); - gpio_direction_output(GPIO_PORT114, 0); #ifdef CONFIG_CACHE_L2X0 /* Shared attribute override enable, 64K*8way */ |