diff options
Diffstat (limited to 'arch/arm/mach-omap2')
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3evm.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 6 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/omap_phy_internal.c | 138 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/serial.c | 18 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/twl-common.c | 5 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/usb-musb.c | 3 |
6 files changed, 19 insertions, 152 deletions
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 0d362e9f9cb..3d2a988e3d9 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -32,6 +32,7 @@ #include <linux/spi/ads7846.h> #include <linux/i2c/twl.h> #include <linux/usb/otg.h> +#include <linux/usb/nop-usb-xceiv.h> #include <linux/smsc911x.h> #include <linux/wl12xx.h> diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index afb60917a94..64b564f13d5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -5890,6 +5890,12 @@ static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = { .pa_end = 0x4a0ab003, .flags = ADDR_TYPE_RT }, + { + /* XXX: Remove this once control module driver is in place */ + .pa_start = 0x4a00233c, + .pa_end = 0x4a00233f, + .flags = ADDR_TYPE_RT + }, { } }; diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index d52651a05da..874aecc0fac 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -31,144 +31,6 @@ #include <plat/usb.h> #include "control.h" -/* OMAP control module register for UTMI PHY */ -#define CONTROL_DEV_CONF 0x300 -#define PHY_PD 0x1 - -#define USBOTGHS_CONTROL 0x33c -#define AVALID BIT(0) -#define BVALID BIT(1) -#define VBUSVALID BIT(2) -#define SESSEND BIT(3) -#define IDDIG BIT(4) - -static struct clk *phyclk, *clk48m, *clk32k; -static void __iomem *ctrl_base; -static int usbotghs_control; - -int omap4430_phy_init(struct device *dev) -{ - ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K); - if (!ctrl_base) { - pr_err("control module ioremap failed\n"); - return -ENOMEM; - } - /* Power down the phy */ - __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF); - - if (!dev) { - iounmap(ctrl_base); - return 0; - } - - phyclk = clk_get(dev, "ocp2scp_usb_phy_ick"); - if (IS_ERR(phyclk)) { - dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n"); - iounmap(ctrl_base); - return PTR_ERR(phyclk); - } - - clk48m = clk_get(dev, "ocp2scp_usb_phy_phy_48m"); - if (IS_ERR(clk48m)) { - dev_err(dev, "cannot clk_get ocp2scp_usb_phy_phy_48m\n"); - clk_put(phyclk); - iounmap(ctrl_base); - return PTR_ERR(clk48m); - } - - clk32k = clk_get(dev, "usb_phy_cm_clk32k"); - if (IS_ERR(clk32k)) { - dev_err(dev, "cannot clk_get usb_phy_cm_clk32k\n"); - clk_put(phyclk); - clk_put(clk48m); - iounmap(ctrl_base); - return PTR_ERR(clk32k); - } - return 0; -} - -int omap4430_phy_set_clk(struct device *dev, int on) -{ - static int state; - - if (on && !state) { - /* Enable the phy clocks */ - clk_enable(phyclk); - clk_enable(clk48m); - clk_enable(clk32k); - state = 1; - } else if (state) { - /* Disable the phy clocks */ - clk_disable(phyclk); - clk_disable(clk48m); - clk_disable(clk32k); - state = 0; - } - return 0; -} - -int omap4430_phy_power(struct device *dev, int ID, int on) -{ - if (on) { - if (ID) - /* enable VBUS valid, IDDIG groung */ - __raw_writel(AVALID | VBUSVALID, ctrl_base + - USBOTGHS_CONTROL); - else - /* - * Enable VBUS Valid, AValid and IDDIG - * high impedance - */ - __raw_writel(IDDIG | AVALID | VBUSVALID, - ctrl_base + USBOTGHS_CONTROL); - } else { - /* Enable session END and IDIG to high impedance. */ - __raw_writel(SESSEND | IDDIG, ctrl_base + - USBOTGHS_CONTROL); - } - return 0; -} - -int omap4430_phy_suspend(struct device *dev, int suspend) -{ - if (suspend) { - /* Disable the clocks */ - omap4430_phy_set_clk(dev, 0); - /* Power down the phy */ - __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF); - - /* save the context */ - usbotghs_control = __raw_readl(ctrl_base + USBOTGHS_CONTROL); - } else { - /* Enable the internel phy clcoks */ - omap4430_phy_set_clk(dev, 1); - /* power on the phy */ - if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) { - __raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF); - mdelay(200); - } - - /* restore the context */ - __raw_writel(usbotghs_control, ctrl_base + USBOTGHS_CONTROL); - } - - return 0; -} - -int omap4430_phy_exit(struct device *dev) -{ - if (ctrl_base) - iounmap(ctrl_base); - if (phyclk) - clk_put(phyclk); - if (clk48m) - clk_put(clk48m); - if (clk32k) - clk_put(clk32k); - - return 0; -} - void am35x_musb_reset(void) { u32 regval; diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index c1b93c752d7..9e80d209d13 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -81,8 +81,9 @@ static struct omap_uart_port_info omap_serial_default_info[] __initdata = { }; #ifdef CONFIG_PM -static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) +static void omap_uart_enable_wakeup(struct device *dev, bool enable) { + struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); if (!od) @@ -99,15 +100,17 @@ static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) * in Smartidle Mode When Configured for DMA Operations. * WA: configure uart in force idle mode. */ -static void omap_uart_set_noidle(struct platform_device *pdev) +static void omap_uart_set_noidle(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); } -static void omap_uart_set_smartidle(struct platform_device *pdev) +static void omap_uart_set_smartidle(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); u8 idlemode; @@ -120,10 +123,10 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) } #else -static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) +static void omap_uart_enable_wakeup(struct device *dev, bool enable) {} -static void omap_uart_set_noidle(struct platform_device *pdev) {} -static void omap_uart_set_smartidle(struct platform_device *pdev) {} +static void omap_uart_set_noidle(struct device *dev) {} +static void omap_uart_set_smartidle(struct device *dev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX @@ -304,6 +307,9 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.dma_rx_timeout = info->dma_rx_timeout; omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate; omap_up.autosuspend_timeout = info->autosuspend_timeout; + omap_up.DTR_gpio = info->DTR_gpio; + omap_up.DTR_inverted = info->DTR_inverted; + omap_up.DTR_present = info->DTR_present; pdata = &omap_up; pdata_size = sizeof(struct omap_uart_port_info); diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index db5ff664237..329b726012f 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -251,11 +251,6 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, #if defined(CONFIG_ARCH_OMAP4) static struct twl4030_usb_data omap4_usb_pdata = { - .phy_init = omap4430_phy_init, - .phy_exit = omap4430_phy_exit, - .phy_power = omap4430_phy_power, - .phy_set_clock = omap4430_phy_set_clk, - .phy_suspend = omap4430_phy_suspend, }; static struct regulator_init_data omap4_vdac_idata = { diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index c4a57685666..e9b4b234dc5 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -117,7 +117,4 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) dev->dma_mask = &musb_dmamask; dev->coherent_dma_mask = musb_dmamask; put_device(dev); - - if (cpu_is_omap44xx()) - omap4430_phy_init(dev); } |