diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-apollon.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-apollon.c | 30 |
1 files changed, 22 insertions, 8 deletions
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index bd75642aee6..c6421a72514 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -35,13 +35,14 @@ #include <mach/gpio.h> #include <plat/led.h> -#include <plat/mux.h> #include <plat/usb.h> #include <plat/board.h> #include <plat/common.h> #include <plat/gpmc.h> #include <plat/control.h> +#include "mux.h" + /* LED & Switch macros */ #define LED0_GPIO13 13 #define LED1_GPIO14 14 @@ -244,7 +245,7 @@ static inline void __init apollon_init_smc91x(void) apollon_smc91x_resources[0].end = base + 0x30f; udelay(100); - omap_cfg_reg(W4__24XX_GPIO74); + omap_mux_init_gpio(74, 0); if (gpio_request(APOLLON_ETHR_GPIO_IRQ, "SMC91x irq") < 0) { printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", APOLLON_ETHR_GPIO_IRQ); @@ -286,15 +287,15 @@ static void __init omap_apollon_init_irq(void) static void __init apollon_led_init(void) { /* LED0 - AA10 */ - omap_cfg_reg(AA10_242X_GPIO13); + omap_mux_init_signal("vlynq_clk.gpio_13", 0); gpio_request(LED0_GPIO13, "LED0"); gpio_direction_output(LED0_GPIO13, 0); /* LED1 - AA6 */ - omap_cfg_reg(AA6_242X_GPIO14); + omap_mux_init_signal("vlynq_rx1.gpio_14", 0); gpio_request(LED1_GPIO14, "LED1"); gpio_direction_output(LED1_GPIO14, 0); /* LED2 - AA4 */ - omap_cfg_reg(AA4_242X_GPIO15); + omap_mux_init_signal("vlynq_rx0.gpio_15", 0); gpio_request(LED2_GPIO15, "LED2"); gpio_direction_output(LED2_GPIO15, 0); } @@ -303,22 +304,35 @@ static void __init apollon_usb_init(void) { /* USB device */ /* DEVICE_SUSPEND */ - omap_cfg_reg(P21_242X_GPIO12); + omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0); gpio_request(12, "USB suspend"); gpio_direction_output(12, 0); - omap_usb_init(&apollon_usb_config); + omap2_usbfs_init(&apollon_usb_config); } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_apollon_init(void) { u32 v; + omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC); + apollon_led_init(); apollon_flash_init(); apollon_usb_init(); /* REVISIT: where's the correct place */ - omap_cfg_reg(W19_24XX_SYS_NIRQ); + omap_mux_init_signal("sys_nirq", OMAP_PULL_ENA | OMAP_PULL_UP); + + /* LCD PWR_EN */ + omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP); /* Use Interal loop-back in MMC/SDIO Module Input Clock selection */ v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); |